This is part of the approved D63204 pending parent revision.
This small change is in fact a part of the VOP2b legalization which
does not technically belong to wave32 support, so extracted
separately.
llvm-svn: 363625
The VOP3 form should always be the preferred selection, to be shrunk
later. This should only be an optimization issue, but this partially
works around a problem from clobbering VCC when SIFixSGPRCopies
rewrites an SCC defining operation directly to VCC.
3 of the testcases are regressions from failing to fold the immediate
in cases it should. These can be avoided by improving the VCC liveness
handling in SIFoldOperands. Simply increasing the threshold to
computeRegisterLiveness works, although this is common enough that VCC
liveness should probably be tracked throughout the pass. The hack of
leaving behind an implicit_def instruction to avoid breaking iterator
wastes instruction count, which inhibits finding the VCC def in long
chains of adds. Doing this however exposes different, worse looking
regressions from poor scheduling behavior. This could probably be
avoided around by forcing the shrink of the addc here, but the
scheduler should probably be fixed.
The r600 add test needs to be split out because it asserts on the
arguments in the new test during the calling convention lowering.
llvm-svn: 360293
The VOP3 form should always be the preferred selection form to be
shrunk later.
The r600 sub test needs to be split out because it asserts on the
arguments in the new test during the calling convention lowering.
llvm-svn: 359899
We have done some predicate and feature refactoring lately but
did not upstream it. This is to sync.
Differential revision: https://reviews.llvm.org/D60292
llvm-svn: 357791
Allow the clamp modifier on vop3 int arithmetic instructions in assembly
and disassembly.
This involved adding a clamp operand to the affected instructions in MIR
and MC, and thus having to fix up several places in codegen and MIR
tests.
Differential Revision: https://reviews.llvm.org/D59267
Change-Id: Ic7775105f02a985b668fa658a0cd7837846a534e
llvm-svn: 356399
This commit allows v_cndmask_b32_e64 with abs, neg source
modifiers on src0, src1 to be assembled and disassembled.
This does appear to be allowed, even though they are floating point
modifiers and the operand type is b32.
To do this, I added src0_modifiers and src1_modifiers to the
MachineInstr, which involved fixing up several places in codegen and mir
tests.
Differential Revision: https://reviews.llvm.org/D59191
Change-Id: I69bf4a8c73ebc65744f6110bb8fc4e937d79fbea
llvm-svn: 356398
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
A new pass to manage the Mode register.
Currently this just manages the floating point double precision
rounding requirements, but is intended to be easily extended to
encompass all Mode register settings.
The immediate motivation comes from the requirement to use the
round-to-zero rounding mode for the 16 bit interpolation
instructions, where the rounding mode setting is shared between
16 and 64 bit operations.
llvm-svn: 348754
Introduces DPP pseudo instructions and the pass that combines DPP mov with subsequent uses.
Differential revision: https://reviews.llvm.org/D53762
llvm-svn: 347993
Introduce new versions that follow the IEEE semantics
to help with legalization that may need quieted inputs.
There are some regressions from inserting unnecessary
canonicalizes when these are matched from fast math
fcmp + select which should be fixed in a future commit.
llvm-svn: 344914
Summary: This change is the first part of the AMDGPU target description
change. The aim of it is the effective splitting the vector and scalar
flows at the selection stage. Selection uses predicate functions based
on the framework implemented earlier - https://reviews.llvm.org/D35267
Differential revision: https://reviews.llvm.org/D52019
Reviewers: rampitec
llvm-svn: 342719
Summary:
Add some optional code to validate getInstSizeInBytes for emitted
instructions. This flushed out some issues which are fixed by this
patch:
- Streamline getInstSizeInBytes
- Properly define the VI readlane/writelane instruction as VOP3
- Fix the inline constant determination. Specifically, this change
fixes an issue where a 32-bit value of 0xffffffff was recorded
as unsigned. This is equal to -1 when restricting to a 32-bit
comparison, and an inline constant can be used.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D50629
Change-Id: Id87c3b7975839da0de8156a124b0ce98c5fb47f2
llvm-svn: 340903
Mutate the node type during selection when it
doesn't matter. This avoids an intermediate bitcast
node on targets with legal i16/f16.
Also fixes missing output modifiers on v_cvt_pkrtz_f32_f16,
which I assume are OK.
llvm-svn: 338619
Summary:
For use by LLPC SPV_AMD_shader_ballot extension.
The v_writelane instruction was already implemented for use by SGPR
spilling, but I had to add an extra dummy operand tied to the
destination, to represent that all lanes except the selected one keep
the old value of the destination register.
.ll test changes were due to schedule changes caused by that new
operand.
Differential Revision: https://reviews.llvm.org/D42838
llvm-svn: 326353
In some cases we do not copy implicit defs from pseudo to real
VOP instructions. It has no visible impact at the moment thus no
tests are affected or added.
Differential Revision: https://reviews.llvm.org/D41783
llvm-svn: 322496
When translating pseudo to MC, v_add/sub/subrev_u32 shall be mapped via a separate table as GFX8 has opcodes with the same names.
These instructions shall also be labelled as renamed for pseudoToMCOpcode to handle them correctly.
Reviewers: arsenm
Differential Revision: https://reviews.llvm.org/D40550
llvm-svn: 319311
These are problematic because they apply to everything,
and can easily clobber whatever more specific predicate
you are trying to add to a function.
Currently instructions use SubtargetPredicate/PredicateControl
to apply this to patterns applied to an instruction definition,
but not to free standing Pats. Add a wrapper around Pat
so the special PredicateControls requirements can be appended
to the final predicate list like how Mips does it.
llvm-svn: 314742
Summary:
All instructions with the DPP modifier may not write to certain lanes of
the output if bound_ctrl=1 is set or any bits in bank_mask or row_mask
aren't set, so the destination register may be both defined and modified.
The right way to handle this is to add a constraint that the destination
register is the same as one of the inputs. We could tie the destination
to the first source, but that would be too restrictive for some use-cases
where we want the destination to be some other value before the
instruction executes. Instead, add a fake "old" source and tie it to the
destination. Effectively, the "old" source defines what value unwritten
lanes will get. We'll expose this functionality to users with a new
intrinsic later.
Also, we want to use DPP instructions for computing derivatives, which
means we need to set WQM for them. We also need to enable the entire
wavefront when using DPP intrinsics to implement nonuniform subgroup
reductions, since otherwise we'll get incorrect results in some cases.
To accomodate this, add a new operand to all DPP instructions which will
be interpreted by the SI WQM pass. This will be exposed with a new
intrinsic later. We'll also add support for Whole Wavefront Mode later.
I also fixed llvm.amdgcn.mov.dpp to overwrite the source and fixed up
the test. However, I could also keep the old behavior (where lanes that
aren't written are undefined) if people want it.
Reviewers: tstellar, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D34716
llvm-svn: 310283
Summary:
Previously, CodeGen checked first src operand type to determine if omod is supported by instruction. This isn't correct for some instructions: e.g. V_CMP_EQ_F32 has floating-point src operands but desn't support omod.
Changed .td files to check if dst operand instead of src operand.
Reviewers: arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D35350
llvm-svn: 308179
Summary:
Despite that this instructions are listed in VOP2, they are treated as VOP3 in specs. They should not support SDWA.
There are no real instructions for them, but there are pseudo instructions.
Reviewers: arsenm, vpykhtin, cfang
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D34403
llvm-svn: 305999
This simplification allows to avoid generating v_cndmask_b32
to serialize condition code between compare and use.
Differential Revision: https://reviews.llvm.org/D34300
llvm-svn: 305962
Summary: Previously there were two separate pseudo instruction for SDWA on VI and on GFX9. Created one pseudo instruction that is union of both of them. Added verifier to check that operands conform either VI or GFX9.
Reviewers: dp, arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, artem.tamazov
Differential Revision: https://reviews.llvm.org/D34026
llvm-svn: 305886
Stanislav Mekhanoshin