Summary:
The VirtReg2Value mapping is crucial for getting consistently
reliable divergence information into the SelectionDAG. This
patch fixes a bunch of issues that lead to incorrect divergence
info and introduces tight assertions to ensure we don't regress:
1. VirtReg2Value is generated lazily; there were some cases where
a lookup was performed before all relevant virtual registers were
created, leading to an out-of-sync mapping. Those cases were:
- Complex code to lower formal arguments that generated CopyFromReg
nodes from live-in registers (fixed by never querying the mapping
for live-in registers).
- Code that generates CopyToReg for formal arguments that are used
outside the entry basic block (fixed by never querying the
mapping for Register nodes, which don't need the divergence info
anyway).
2. For complex values that are lowered to a sequence of registers,
all registers must be reflected in the VirtReg2Value mapping.
I am not adding any new tests, since I'm not actually aware of any
bugs that these problems are causing with trunk as-is. However,
I recently added a test case (in r346423) which fails when D53283 is
applied without this change. Also, the new assertions should provide
most of the effective test coverage.
There is one test change in sdwa-peephole.ll. The underlying issue
is that since the divergence info is now correct, the DAGISel will
select V_OR_B32 directly instead of S_OR_B32. This leads to an extra
COPY which affects the behavior of MachineLICM in a way that ends up
with the S_MOV_B32 with the constant in a different basic block than
the V_OR_B32, which is presumably what defeats the peephole.
Reviewers: alex-t, arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D54340
llvm-svn: 348049
Introduces DPP pseudo instructions and the pass that combines DPP mov with subsequent uses.
Differential revision: https://reviews.llvm.org/D53762
llvm-svn: 347993
Also revert fix r347876
One of the buildbots was reporting a failure in some relevant tests that I can't
repro or explain at present, so reverting until I can isolate.
llvm-svn: 347911
This patch adds support for S_ANDN2, S_ORN2 32-bit and 64-bit instructions and adds splits to move them to the vector unit (for which there is no equivalent instruction). It modifies the way that the more complex scalar instructions are lowered to vector instructions by first breaking them down to sequences of simpler scalar instructions which are then lowered through the existing code paths. The pattern for S_XNOR has also been updated to apply inversion to one input rather than the output of the XOR as the result is equivalent and may allow leaving the NOT instruction on the scalar unit.
A new tests for NAND, NOR, ANDN2 and ORN2 have been added, and existing tests now hit the new instructions (and have been modified accordingly).
Differential: https://reviews.llvm.org/D54714
llvm-svn: 347877
My change svn-id: 347871 caused a buildbot failure due to an unused
variable def (used in an assert).
Change-Id: Ia882d18bb6fa79b4d7bbfda422b9ea5d23eab336
llvm-svn: 347876
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
llvm-svn: 347871
Summary:
MachineLoopInfo cannot be relied on for correctness, because it cannot
properly recognize loops in irreducible control flow which can be
introduced by late machine basic block optimization passes. See the new
test case for the reduced form of an example that occurred in practice.
Use a simple fixpoint iteration instead.
In order to facilitate this change, refactor WaitcntBrackets so that it
only tracks pending events and registers, rather than also maintaining
state that is relevant for the high-level algorithm. Various accessor
methods can be removed or made private as a consequence.
Affects (in radv):
- dEQP-VK.glsl.loops.special.{for,while}_uniform_iterations.select_iteration_count_{fragment,vertex}
Fixes: r345719 ("AMDGPU: Rewrite SILowerI1Copies to always stay on SALU")
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54231
llvm-svn: 347853
Summary:
There is one obsolete reference to using -1 as an indication of "unknown",
but this isn't actually used anywhere.
Using unsigned makes robust wrapping checks easier.
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, llvm-commits, tpr, t-tye, hakzsam
Differential Revision: https://reviews.llvm.org/D54230
llvm-svn: 347852
Summary:
Instead of storing the "score" (last time point) of the various relevant
events, only store whether an event is pending or not.
This is sufficient, because whenever only one event of a count type is
pending, its last time point is naturally the upper bound of all time
points of this count type, and when multiple event types are pending,
the count type has gone out of order and an s_waitcnt to 0 is required
to clear any pending event type (and will then clear all pending event
types for that count type).
This also removes the special handling of GDS_GPR_LOCK and EXP_GPR_LOCK.
I do not understand what this special handling ever attempted to achieve.
It has existed ever since the original port from an internal code base,
so my best guess is that it solved a problem related to EXEC handling in
that internal code base.
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54228
llvm-svn: 347850
Summary:
It hides the type casting ugliness, and I happened to have to add a new
such loop (in a later patch).
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54227
llvm-svn: 347849
Summary:
Reduce the statefulness of the algorithm in two ways:
1. More clearly split generateWaitcntInstBefore into two phases: the
first one which determines the required wait, if any, without changing
the ScoreBrackets, and the second one which actually inserts the wait
and updates the brackets.
2. Communicate pre-existing s_waitcnt instructions using an argument to
generateWaitcntInstBefore instead of through the ScoreBrackets.
To simplify these changes, a Waitcnt structure is introduced which carries
the counts of an s_waitcnt instruction in decoded form.
There are some functional changes:
1. The FIXME for the VCCZ bug workaround was implemented: we only wait for
SMEM instructions as required instead of waiting on all counters.
2. We now properly track pre-existing waitcnt's in all cases, which leads
to less conservative waitcnts being emitted in some cases.
s_load_dword ...
s_waitcnt lgkmcnt(0) <-- pre-existing wait count
ds_read_b32 v0, ...
ds_read_b32 v1, ...
s_waitcnt lgkmcnt(0) <-- this is too conservative
use(v0)
more code
use(v1)
This increases code size a bit, but the reduced latency should still be a
win in basically all cases. The worst code size regressions in my shader-db
are:
WORST REGRESSIONS - Code Size
Before After Delta Percentage
1724 1736 12 0.70 % shaders/private/f1-2015/1334.shader_test [0]
2276 2284 8 0.35 % shaders/private/f1-2015/1306.shader_test [0]
4632 4640 8 0.17 % shaders/private/ue4_elemental/62.shader_test [0]
2376 2384 8 0.34 % shaders/private/f1-2015/1308.shader_test [0]
3284 3292 8 0.24 % shaders/private/talos_principle/1955.shader_test [0]
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54226
llvm-svn: 347848
Currently, instructions doing memory accesses through a base operand that is
not a register can not be analyzed using `TII::getMemOpBaseRegImmOfs`.
This means that functions such as `TII::shouldClusterMemOps` will bail
out on instructions using an FI as a base instead of a register.
The goal of this patch is to refactor all this to return a base
operand instead of a base register.
Then in a separate patch, I will add FI support to the mem op clustering
in the MachineScheduler.
Differential Revision: https://reviews.llvm.org/D54846
llvm-svn: 347746
It's possible in some cases to have a restore present
without a corresponding spill. Due to an apparent bug
in D54366 <https://reviews.llvm.org/D54366>, only the
restore for a register was emitted. It's probably
always a bug for this to happen, but due to how SGPR
spilling is implemented, this makes the issues appear
worse than it is.
llvm-svn: 347595
This works if DAG combiner is enabled, but without combining
we cannot select scalar_to_vector of <2 x half> and <2 x i16>.
Differential Revision: https://reviews.llvm.org/D54718
llvm-svn: 347259
This allows to avoid scratch use or indirect VGPR addressing for
small vectors.
Differential Revision: https://reviews.llvm.org/D54606
llvm-svn: 347231
Summary:
AMDGPUAsmPrinter has a getSTI function that derives a GCNSubtarget from the
TM. However, this means that overridden target features are not detected and can
result in incorrect behaviour.
Switch to using STM which is a GCNSubtarget derived from the MF (used elsewhere
in the same function).
Change-Id: Ib6328ad667b7fcdc87e9c06344e59859207db9b0
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D54301
llvm-svn: 347221
If a block had one of the _term instructions used for gluing
exec modifying instructions to the end of the block,
analyzeBranch would fail, preventing the verifier from catching
a broken successor list.
llvm-svn: 347027
Add a pass to fixup various vector ISel issues.
Currently we handle converting GLOBAL_{LOAD|STORE}_*
and GLOBAL_Atomic_* instructions into their _SADDR variants.
This involves feeding the sreg into the saddr field of the new instruction.
llvm-svn: 347008
An extractelement with non-constant index will be lowered either to
scratch or movrel loop in most cases. This patch converts such
instruction into a set of selects if vector size is not too big.
Differential Revision: https://reviews.llvm.org/D54351
llvm-svn: 346800
Sometimes after basic block placement we end up with a code like:
sreg = s_mov_b64 -1
vcc = s_and_b64 exec, sreg
s_cbranch_vccz
This happens as a join of a block assigning -1 to a saved mask and
another block which consumes that saved mask with s_and_b64 and a
branch.
This is essentially a single s_cbranch_execz instruction when moved
into a single new basic block.
Differential Revision: https://reviews.llvm.org/D54164
llvm-svn: 346690
This is a long-awaited follow-up suggested in D33578. Since then, we've picked up even more
opportunities for vector narrowing from changes like D53784, so there are a lot of test diffs.
Apart from 2-3 strange cases, these are all wins.
I've structured this to be no-functional-change-intended for any target except for x86
because I couldn't tell if AArch64, ARM, and AMDGPU would improve or not. All of those
targets have existing regression tests (4, 4, 10 files respectively) that would be
affected. Also, Hexagon overrides the shouldReduceLoadWidth() hook, but doesn't show
any regression test diffs. The trade-off is deciding if an extra vector load is better
than a single wide load + extract_subvector.
For x86, this is almost always better (on paper at least) because we often can fold
loads into subsequent ops and not increase the official instruction count. There's also
some unknown -- but potentially large -- benefit from using narrower vector ops if wide
ops are implemented with multiple uops and/or frequency throttling is avoided.
Differential Revision: https://reviews.llvm.org/D54073
llvm-svn: 346595
Promote alloca can vectorize a small array by bitcasting it to a
vector type. Extend vectorization for the case when alloca is
already a vector type. We still want to replace GEPs with an
insert/extract element instructions in this case.
Differential Revision: https://reviews.llvm.org/D54219
llvm-svn: 346376
Summary:
This is not needed, because we don't actually insert relevant branches
for KILLs that late in the compilation flow.
Besides, this was always checking for the wrong kill opcode anyway...
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D54085
llvm-svn: 346362
This allows testing AMDGPU alias analysis like any
other alias analysis pass. This fixes the existing
test pointlessly running opt -O3 when it really
just wants to run the one analysis.
Before there was no way to test this using -aa-eval
with opt, since the default constructed pass
is run. The wrapper subclass allows the
default constructor to pass the necessary callback.
llvm-svn: 346353
Add this option for debugging and providing workaround.
By default it is off so no behavior change in backend.
Differential Revision: https://reviews.llvm.org/D54158
llvm-svn: 346267
The main caller of this already has an MVT and several targets called getSimpleVT inside without checking isSimple. This makes the simpleness explicit.
llvm-svn: 346180
The new atomic optimizer I previously added in D51969 did not work
correctly when a pixel shader was using derivatives, and had helper
lanes active.
To fix this we add an llvm.amdgcn.ps.live call that guards a branch
around the entire atomic operation - ensuring that all helper lanes are
inactive within the wavefront when we compute our atomic results.
I've added a test case that can cause derivatives, and exposes the
problem.
Differential Revision: https://reviews.llvm.org/D53930
llvm-svn: 346128
UBSan detected an error in our ISelLowering that is exposed only when
you have a dmask == 0x1. Fix this by adding in an explicit check to
ensure we don't do the UBSan detected shl << 32.
llvm-svn: 345962
Summary: Different variants of idot8 codegen dag patterns are not generated by llvm-tablegen due to a huge
increase in the compile time. Support the pattern that clang FE generates after reordering the
additions in integer-dot8 source language pattern.
Author: FarhanaAleen
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D53937
llvm-svn: 345902
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
SimplifySetCC could shrink a load without checking for
profitability or legality of such shink with a target.
Added checks to prevent shrinking of aligned scalar loads
in AMDGPU below dword as scalar engine does not support it.
Differential Revision: https://reviews.llvm.org/D53846
llvm-svn: 345778
This feature is only relevant to shaders, and is no longer used. When disabled,
lowering of reserved registers for shaders causes a compiler crash.
Remove the feature and add a test for compilation of shaders at OptNone.
Differential Revision: https://reviews.llvm.org/D53829
llvm-svn: 345763
Summary:
Instead of writing boolean values temporarily into 32-bit VGPRs
if they are involved in PHIs or are observed from outside a loop,
we use bitwise masking operations to combine lane masks in a way
that is consistent with wave control flow.
Move SIFixSGPRCopies to before this pass, since that pass
incorrectly attempts to move SGPR phis to VGPRs.
This should recover most of the code quality that was lost with
the bug fix in "AMDGPU: Remove PHI loop condition optimization".
There are still some relevant cases where code quality could be
improved, in particular:
- We often introduce redundant masks with EXEC. Ideally, we'd
have a generic computeKnownBits-like analysis to determine
whether masks are already masked by EXEC, so we can avoid this
masking both here and when lowering uniform control flow.
- The criterion we use to determine whether a def is observed
from outside a loop is conservative: it doesn't check whether
(loop) branch conditions are uniform.
Change-Id: Ibabdb373a7510e426b90deef00f5e16c5d56e64b
Reviewers: arsenm, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, mgorny, yaxunl, dstuttard, t-tye, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53496
llvm-svn: 345719
Summary:
The optimization to early break out of loops if all threads are dead was
never fully implemented.
But the PHI node analyzing is actually causing a number of problems, so
remove all the extra code for it.
(This does actually regress code quality in a few places because it
ends up relying more heavily on phi's of i1, which we don't do a
great job with. However, since it fixes real bugs in the wild, we
should take this change. I have some prototype changes to improve
i1 lowering in general -- not just for control flow -- which should
help recover the code quality, I just need to make those changes
fit for general consumption. -- Nicolai)
Change-Id: I6fc6c6c8961857ac6009fcfb9f7e5e48dc23fbb1
Patch-by: Christian König <christian.koenig@amd.com>
Reviewers: arsenm, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53359
llvm-svn: 345718
Our a16 support was only enabled for sample/gather and buffer
load/store, but not for image load/store operations (which take an i16
as the pixel index rather than a half).
Fix our isel lowering and add test cases to prove it out.
Differential Revision: https://reviews.llvm.org/D53750
llvm-svn: 345710
Similar to FoldCONCAT_VECTORS, this patch adds FoldBUILD_VECTOR to simplify cases that can avoid the creation of the BUILD_VECTOR - if all the operands are UNDEF or if the BUILD_VECTOR simplifies to a copy.
This exposed an assumption in some AMDGPU code that getBuildVector was guaranteed to be a BUILD_VECTOR node that I've tried to handle.
Differential Revision: https://reviews.llvm.org/D53760
llvm-svn: 345578
AMDGPU currently only supports direct calls, but at lower optimisation levels it
fails to lower statically direct calls which appear indirect due to a bitcast.
Add a pass to visit all CallSites and use CallPromotionUtils to "devirtualize"
calls.
Differential Revision: https://reviews.llvm.org/D52741
llvm-svn: 345382
Introduce new versions that follow the IEEE semantics
to help with legalization that may need quieted inputs.
There are some regressions from inserting unnecessary
canonicalizes when these are matched from fast math
fcmp + select which should be fixed in a future commit.
llvm-svn: 344914
Summary:
Add selection patterns to support one bit Sub.
Reviewers:
rampitec, arsenm
Differential Revision:
https://reviews.llvm.org/D52946
llvm-svn: 344815
Summary:
To workaround a hardware issue in the (base + offset) calculation
when base is negative. The impact on code quality should be limited
since SILoadStoreOptimizer still runs afterwards and is able to
combine loads/stores based on known sign information.
This fixes visible corruption in Hitman on SI (easily reproducible
by running benchmark mode).
Change-Id: Ia178d207a5e2ac38ae7cd98b532ea2ae74704e5f
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99923
Reviewers: arsenm, mareko
Subscribers: jholewinski, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53160
llvm-svn: 344698
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
llvm-svn: 344696
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
Emit a waterfall loop in the general case for a potentially-divergent Rsrc
operand. When practical, avoid this by using Addr64 instructions.
Recommits r341413 with changes to update the MachineDominatorTree when present.
Differential Revision: https://reviews.llvm.org/D51742
llvm-svn: 343992
This commit adds a new IR level pass to the AMDGPU backend to perform
atomic optimizations. It works by:
- Running through a function and finding atomicrmw add/sub or uses of
the atomic buffer intrinsics for add/sub.
- If all arguments except the value to be added/subtracted are uniform,
record the value to be optimized.
- Run through the atomic operations we can optimize and, depending on
whether the value is uniform/divergent use wavefront wide operations
(DPP in the divergent case) to calculate the total amount to be
atomically added/subtracted.
- Then let only a single lane of each wavefront perform the atomic
operation, reducing the total number of atomic operations in flight.
- Lastly we recombine the result from the single lane to each lane of
the wavefront, and calculate our individual lanes offset into the
final result.
Differential Revision: https://reviews.llvm.org/D51969
llvm-svn: 343973
The IRBuilder CreateIntrinsic method wouldn't allow you to specify the
types that you wanted the intrinsic to be mangled with. To fix this
I've:
- Added an ArrayRef<Type *> member to both CreateIntrinsic overloads.
- Used that array to pass into the Intrinsic::getDeclaration call.
- Added a CreateUnaryIntrinsic to replace the most common use of
CreateIntrinsic where the type was auto-deduced from operand 0.
- Added a bunch more unit tests to test Create*Intrinsic calls that
weren't being tested (including the FMF flag that wasn't checked).
This was suggested as part of the AMDGPU specific atomic optimizer
review (https://reviews.llvm.org/D51969).
Differential Revision: https://reviews.llvm.org/D52087
llvm-svn: 343962
Summary:
Merge the SMRD patterns for CI into the same multiclass as the
patterns for other sub-targets.
This removes some duplicate code and will make it easier for some
future GlobalISel changes I would like to do.
Reviewers: arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D52557
llvm-svn: 343909
Finally all targets are enabling multiple regalloc hints, so the hook to
disable this can now be removed.
NFC.
Review: Simon Pilgrim
https://reviews.llvm.org/D52316
llvm-svn: 343851
The isAmdCodeObjectV2 is a misleading name which actually checks whether the os
is amdhsa or mesa.
Also add a test to make sure we do not generate old kernel header for code
object v3.
Differential Revision: https://reviews.llvm.org/D52897
llvm-svn: 343813
Summary:
The new buffer/tbuffer intrinsics handle an out-of-range immediate
offset by moving/adding offset&-4096 to a vgpr, leaving an in-range
immediate offset, with a chance of the move/add being CSEd for similar
loads/stores.
However it turns out that a negative offset in a vgpr is illegal, even
if adding the immediate offset makes it legal again.
Therefore, this commit disables the offset&-4096 thing if the offset is
negative.
Differential Revision: https://reviews.llvm.org/D52683
Change-Id: Ie02f0a74f240a138dc2a29d17cfbd9e350e4ed13
llvm-svn: 343672
Currently it returns incorrect operand size for a target independet
node such as COPY if operand is a register with subreg. Instead of
correct subreg size it returns a size of the whole superreg.
Differential Revision: https://reviews.llvm.org/D52736
llvm-svn: 343508
Summary: This change enables VOP3 shifts to be explicitly selected
dependent on the divergence.
Differential Revision: https://reviews.llvm.org/D52559
Reviewers: rampitec
llvm-svn: 343455
Summary:
This is essentially NFC, because the complex pattern used for these patterns
will fail on non-CI, but this makes the pattern consistent with other CI
smrd patterns. It is also a performance improvement, because the pattern
will now fail earlier on non-CI.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D52469
llvm-svn: 343125
Summary:
We generate s_xor to lower add of i1s in general cases, and s_not to
lower add with a one-bit imm of -1 (true).
Reviewers:
rampitec
Differential Revision:
https://reviews.llvm.org/D52518
llvm-svn: 343030
[AMDGPU] lower-switch in preISel as a workaround for legacy DA
Summary:
The default target of the switch instruction may sometimes be an
"unreachable" block, when it is guaranteed that one of the cases is
always taken. The dominator tree concludes that such a switch
instruction does not have an immediate post dominator. This confuses
divergence analysis, which is unable to propagate sync dependence to
the targets of the switch instruction.
As a workaround, the AMDGPU target now invokes lower-switch as a
preISel pass. LowerSwitch is designed to handle the unreachable
default target correctly, allowing the divergence analysis to locate
the correct immediate dominator of the now-lowered switch.
llvm-svn: 342956
If the alignment is at least 4, this should report true.
Something still seems off with how < 4-byte types are
handled here though.
Fixing this seems to change how some combines get
to where they get, but somehow isn't changing the net
result.
llvm-svn: 342879
Summary:
The default target of the switch instruction may sometimes be an
"unreachable" block, when it is guaranteed that one of the cases is
always taken. The dominator tree concludes that such a switch
instruction does not have an immediate post dominator. This confuses
divergence analysis, which is unable to propagate sync dependence to
the targets of the switch instruction.
As a workaround, the AMDGPU target now invokes lower-switch as a
preISel pass. LowerSwitch is designed to handle the unreachable
default target correctly, allowing the divergence analysis to locate
the correct immediate dominator of the now-lowered switch.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits, simoll
Differential Revision: https://reviews.llvm.org/D52221
llvm-svn: 342722
Summary: This change is the first part of the AMDGPU target description
change. The aim of it is the effective splitting the vector and scalar
flows at the selection stage. Selection uses predicate functions based
on the framework implemented earlier - https://reviews.llvm.org/D35267
Differential revision: https://reviews.llvm.org/D52019
Reviewers: rampitec
llvm-svn: 342719
Summary:
This is required for GPUs with 16 bit instructions where f16 is a
legal register type and hence int_to_fp i1 to f16 is not lowered
by legalizing.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D52018
Change-Id: Ie4c0fd6ced7cf10ad612023c6879724d9ded5851
llvm-svn: 342558
- Instead of having both `SUnit::dump(ScheduleDAG*)` and
`ScheduleDAG::dumpNode(ScheduleDAG*)`, just keep the latter around.
- Add `ScheduleDAG::dump()` and avoid code duplication in several
places. Implement it for different ScheduleDAG variants.
- Add `ScheduleDAG::dumpNodeName()` in favor of the `SUnit::print()`
functions. They were only ever used for debug dumping and putting the
function into ScheduleDAG is consistent with the `dumpNode()` change.
llvm-svn: 342520
Summary:
GFX9 and above support sin/cos instructions with a greater range and thus don't
require a fract instruction prior to invocation.
Added a subtarget feature to reflect this and added code to take advantage of
expanded range on GFX9+
Also updated the tests to check correct behaviour
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51933
Change-Id: I1c1f1d3726a5ae32116646ca5cfa1ab4ef69e5b0
llvm-svn: 342222
Summary:
I accidentally left this behind in D50306, and it causes a build warning
when I build with gcc7.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D52022
Change-Id: I30f7a47047e9d9d841f652da66d2fea19e74842c
llvm-svn: 342189
If an argument was passed on the stack, this
was using the default alignment.
I'm not sure there's an observable change from this. This
was observable due to bugs in expansion of unaligned
loads and stores, but since that is fixed I don't think
this matters much.
llvm-svn: 342133
Move isa version determination into TargetParser.
Also switch away from target features to CPU string when
determining isa version. This fixes an issue when we
output wrong isa version in the object code when features
of a particular CPU are altered (i.e. gfx902 w/o xnack
used to result in gfx900).
llvm-svn: 342069
into TargetParser.
Also switch away from target features to CPU string when
determining isa version. This fixes an issue when we
output wrong isa version in the object code when features
of a particular CPU are altered (i.e. gfx902 w/o xnack
used to result in gfx900).
Differential Revision: https://reviews.llvm.org/D51890
llvm-svn: 341982
This already worked if only one register piece was used,
but didn't if a type was split into multiple, unequal
sized pieces.
Fixes not splitting 3i16/v3f16 into two registers for
AMDGPU.
This will also allow fixing the ABI for 16-bit vectors
in a future commit so that it's the same for all subtargets.
llvm-svn: 341801
Summary:
This fixes a bug where a large number of implicit def instructions can fill the GCNHazardRecognizer lookahead buffer causing required NOPs to not be inserted.
Reviewers: nhaehnle, arsenm
Reviewed By: arsenm
Subscribers: sheredom, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51726
Change-Id: Ie75338f94de704ee5816b05afd0c922c6748a95b
llvm-svn: 341798
Emit a waterfall loop in the general case for a potentially-divergent Rsrc
operand. When practical, avoid this by using Addr64 instructions.
Differential Revision: https://reviews.llvm.org/D50982
llvm-svn: 341413
The intention is to enable the extract_vector_elt load combine,
and doing this for other operations interferes with more
useful optimizations on vectors.
Handle any type of load since in principle we should do the
same combine for the various load intrinsics.
llvm-svn: 341219
Summary:
This is patch 1 of the new DivergenceAnalysis (https://reviews.llvm.org/D50433).
The purpose of this patch is to free up the name DivergenceAnalysis for the new generic
implementation. The generic implementation class will be shared by specialized
divergence analysis classes.
Patch by: Simon Moll
Reviewed By: nhaehnle
Subscribers: jvesely, jholewinski, arsenm, nhaehnle, mgorny, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50434
Change-Id: Ie8146b11be2c50d5312f30e11c7a3036a15b48cb
llvm-svn: 341071
Summary:
Add some optional code to validate getInstSizeInBytes for emitted
instructions. This flushed out some issues which are fixed by this
patch:
- Streamline getInstSizeInBytes
- Properly define the VI readlane/writelane instruction as VOP3
- Fix the inline constant determination. Specifically, this change
fixes an issue where a 32-bit value of 0xffffffff was recorded
as unsigned. This is equal to -1 when restricting to a 32-bit
comparison, and an inline constant can be used.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D50629
Change-Id: Id87c3b7975839da0de8156a124b0ce98c5fb47f2
llvm-svn: 340903
This can leave behind the uses with the defs removed.
Since this should only really happen in tests, it's not worth the
effort of trying to handle this.
llvm-svn: 340866
The original motivating example uses a 64-bit add, so the carry
is used. Insert a copy from VCC. This may allow shrinking of
the used carry instruction. At worst, we are replacing a
mov to materialize the constant with a copy of vcc.
llvm-svn: 340862
This needs to be done in the SSA fold operands
pass to be effective, so there is a bit of overlap
with SIShrinkInstructions but I don't think this
is practically avoidable.
llvm-svn: 340859
Summary:
Patch by Marek Olsak and David Stuttard, both of AMD.
This adds a new amdgcn intrinsic supporting s.buffer.load, in particular
multiple dword variants. These are convenient to use from some front-end
implementations.
Also modified the existing llvm.SI.load.const intrinsic to common up the
underlying implementation.
This modification also requires that we can lower to non-uniform loads correctly
by splitting larger dword variants into sizes supported by the non-uniform
versions of the load.
V2: Addressed minor review comments.
V3: i1 glc is now i32 cachepolicy for consistency with buffer and
tbuffer intrinsics, plus fixed formatting issue.
V4: Added glc test.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51098
Change-Id: I83a6e00681158bb243591a94a51c7baa445f169b
llvm-svn: 340684
32-bit constant address space is declared as 6, so the
maximum number of address spaces is 6, not 5.
Fixes "LLVM ERROR: Pointer address space out of range".
v5: rename MAX_COMMON_ADDRESS to MAX_AMDGPU_ADDRESS
v4: - fix compilation issues
- fix out of bounds access
v3: use static_assert()
v2: add a very simple test for 32-bit addr space
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106630
llvm-svn: 340417
Constant and global may alias, also one rules table wasn't
ordered correctly.
Pinpointed by Matt.
v2: add a test with swapped parameters
llvm-svn: 340416
This was hackily adding in the 4-bytes reserved for the callee's
emergency stack slot. Treat it like a normal stack allocation
so we get the correct alignment padding behavior. This fixes
an inconsistency between the caller and callee.
llvm-svn: 340396
In general we can't assume flat loads are uniform, and cases where we can prove
they are should be handled through infer-address-spaces.
Differential Revision: https://reviews.llvm.org/D50991
llvm-svn: 340343
Summary:
Previously the new llvm.amdgcn.raw/struct.buffer.load/store intrinsics
only allowed float types for the data to be loaded or stored, which
sometimes meant the frontend needed to generate a bitcast. In this, the
new intrinsics copied the old buffer intrinsics.
This commit extends the new intrinsics to allow int types as well.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D50315
Change-Id: I8202af2d036455553681dcbb3d7d32ae273f8f85
llvm-svn: 340270
Summary:
This commit adds new intrinsics
llvm.amdgcn.raw.buffer.load
llvm.amdgcn.raw.buffer.load.format
llvm.amdgcn.raw.buffer.load.format.d16
llvm.amdgcn.struct.buffer.load
llvm.amdgcn.struct.buffer.load.format
llvm.amdgcn.struct.buffer.load.format.d16
llvm.amdgcn.raw.buffer.store
llvm.amdgcn.raw.buffer.store.format
llvm.amdgcn.raw.buffer.store.format.d16
llvm.amdgcn.struct.buffer.store
llvm.amdgcn.struct.buffer.store.format
llvm.amdgcn.struct.buffer.store.format.d16
llvm.amdgcn.raw.buffer.atomic.*
llvm.amdgcn.struct.buffer.atomic.*
with the following changes from the llvm.amdgcn.buffer.*
intrinsics:
* there are separate raw and struct versions: raw does not have an
index arg and sets idxen=0 in the instruction, and struct always sets
idxen=1 in the instruction even if the index is 0, to allow for the
fact that gfx9 does bounds checking differently depending on whether
idxen is set;
* there is a combined cachepolicy arg (glc+slc)
* there are now only two offset args: one for the offset that is
included in bounds checking and swizzling, to be split between the
instruction's voffset and immoffset fields, and one for the offset
that is excluded from bounds checking and swizzling, to go into the
instruction's soffset field.
The AMDISD::BUFFER_* SD nodes always have an index operand, all three
offset operands, combined cachepolicy operand, and an extra idxen
operand.
The obsolescent llvm.amdgcn.buffer.* intrinsics continue to work.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50306
Change-Id: If897ea7dc34fcbf4d5496e98cc99a934f62fc205
llvm-svn: 340269
Summary:
This commit adds new intrinsics
llvm.amdgcn.raw.tbuffer.load
llvm.amdgcn.struct.tbuffer.load
llvm.amdgcn.raw.tbuffer.store
llvm.amdgcn.struct.tbuffer.store
with the following changes from the llvm.amdgcn.tbuffer.* intrinsics:
* there are separate raw and struct versions: raw does not have an index
arg and sets idxen=0 in the instruction, and struct always sets
idxen=1 in the instruction even if the index is 0, to allow for the
fact that gfx9 does bounds checking differently depending on whether
idxen is set;
* there is a combined format arg (dfmt+nfmt)
* there is a combined cachepolicy arg (glc+slc)
* there are now only two offset args: one for the offset that is
included in bounds checking and swizzling, to be split between the
instruction's voffset and immoffset fields, and one for the offset
that is excluded from bounds checking and swizzling, to go into the
instruction's soffset field.
The AMDISD::TBUFFER_* SD nodes always have an index operand, all three
offset operands, combined format operand, combined cachepolicy operand,
and an extra idxen operand.
The tbuffer pseudo- and real instructions now also have a combined
format operand.
The obsolescent llvm.amdgcn.tbuffer.* and llvm.SI.tbuffer.store
intrinsics continue to work.
V2: Separate raw and struct intrinsics.
V3: Moved extract_glc and extract_slc defs to a more sensible place.
V4: Rebased on D49995.
V5: Only two separate offset args instead of three.
V6: Pseudo- and real instructions have joint format operand.
V7: Restored optionality of dfmt and nfmt in assembler.
V8: Addressed minor review comments.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D49026
Change-Id: If22ad77e349fac3a5d2f72dda53c010377d470d4
llvm-svn: 340268
getTargetCustom() requires values for "Kind" in the constructor
that are not in the PSVKind enum. Passing a value that is not inside
an enum as an argument to a constructor of the type of the enum is
UB. Changing to the underlying type of the enum would solve the UB
Differential Revision: https://reviews.llvm.org/D50909
llvm-svn: 340200
32-bit constant address space is declared as 6, so the
maximum number of address spaces is 6, not 5.
Fixes "LLVM ERROR: Pointer address space out of range".
v3: use static_assert()
v2: add a very simple test for 32-bit addr space
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106630
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 340171
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
This will allow the library to just use __builtin_expf directly
without expanding this itself. Note f64 still won't work because
there is no exp instruction for it.
llvm-svn: 339902
Handle fmul, fsub and preserve flags.
Also really test minnum/maxnum reductions.
The existing tests were only checking from
minnum/maxnum matched from a fast math compare
and select which is not the same.
llvm-svn: 339820
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
I'm not sure the exact nsz flag combination that
is OK. I think as long as it's on either, this is OK.
For now just check it on the omod multiply.
llvm-svn: 339513
If one of the elements is undef, use the canonicalized constant
from the other element instead of 0.
Splat vectors are more useful for other optimizations, such
as matching vector clamps. This was breaking on clamps
of half3 from the undef 4th component.
llvm-svn: 339512
Fixup test to check for GCN prefix
These patterns always zero extend the result even though it might need sign extension.
This has been broken since the addition of i16 support.
It has popped up in mad_sat(char) test since min(max()) combination is turned into v_med3, resulting in the following (incorrect) sequence:
v_mad_i16 v2, v10, v9, v11
v_med3_i32 v2, v2, v8, v7
Fixes mad_sat(char) piglit on VI.
Differential Revision: https://reviews.llvm.org/D49836
llvm-svn: 339190
This is necessary to add a VI specific builtin,
__builtin_amdgcn_s_dcache_wb. We already have an
overly specific feature for one of these builtins,
for s_memrealtime. I'm not sure whether it's better
to add more of those, or to get rid of that and merge
it with vi-insts.
Alternatively, maybe this logically goes with scalar-stores?
llvm-svn: 339104
Everything should quiet, and I think everything should
flush.
I assume the min3/med3/max3 follow the same rules
as regular min/max for flushing, which should at
least be conservatively correct.
There are still more operations that need to
be handled.
llvm-svn: 339065
Not sure why this was checking for denormals for f16.
My interpretation of the IEEE standard is conversions
should produce a canonical result, and the ISA manual
says denormals are created when appropriate.
llvm-svn: 339064
If denormals are enabled, denormals are canonical.
Also fix a few other issues. minnum/maxnum are supposed
to canonicalize. Temporarily improve workaround for the
instruction behavior change in gfx9.
Handle selects and fcopysign.
The tests were also largely broken, since they were
checking for a flush used on some targets after the
store of the result.
llvm-svn: 339061
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338969
Add a parameter for testing specifically for
sNaNs - at least one instruction pattern on AMDGPU
needs to check specifically for this.
Also handle more cases, and add a target hook
for custom nodes, similar to the hooks for known
bits.
llvm-svn: 338910
Summary:
By not reconstructing the operand list of the SDNode, this change makes
it easier to add the forthcoming new tbuffer and buffer intrinsics.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D49995
Change-Id: I0cb79ef0801532645d7dd954a6d7355139db7b38
llvm-svn: 338784
Summary:
I encountered some problems with SIFixWWMLiveness when WWM is in a loop:
1. It sometimes gave invalid MIR where there is some control flow path
to the new implicit use of a register on EXIT_WWM that does not pass
through any def.
2. There were lots of false positives of registers that needed to have
an implicit use added to EXIT_WWM.
3. Adding an implicit use to EXIT_WWM (and adding an implicit def just
before the WWM code, which I tried in order to fix (1)) caused lots
of the values to be spilled and reloaded unnecessarily.
This commit is a rework of SIFixWWMLiveness, with the following changes:
1. Instead of considering any register with a def that can reach the WWM
code and a def that can be reached from the WWM code, it now
considers three specific cases that need to be handled.
2. A register that needs liveness over WWM to be synthesized now has it
done by adding itself as an implicit use to defs other than the
dominant one.
Also added the following fixmes:
FIXME: We should detect whether a register in one of the above
categories is already live at the WWM code before deciding to add the
implicit uses to synthesize its liveness.
FIXME: I believe this whole scheme may be flawed due to the possibility
of the register allocator doing live interval splitting.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46756
Change-Id: Ie7fba0ede0378849181df3f1a9a7a39ed1a94a94
llvm-svn: 338783
Summary:
This fixes a problem where a load from global+idx generated incorrect
code on <=gfx7 when the index is divergent.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47383
Change-Id: Ib4d177d6254b1dd3f8ec0203fdddec94bd8bc5ed
llvm-svn: 338779
Mutate the node type during selection when it
doesn't matter. This avoids an intermediate bitcast
node on targets with legal i16/f16.
Also fixes missing output modifiers on v_cvt_pkrtz_f32_f16,
which I assume are OK.
llvm-svn: 338619
Summary:
Add _L to _LZ image intrinsic table mapping to table gen.
In ISelLowering check if image intrinsic has lod and if it's equal
to zero, if so remove lod and change opcode to equivalent mapped _LZ.
Change-Id: Ie24cd7e788e2195d846c7bd256151178cbb9ec71
Subscribers: arsenm, mehdi_amini, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49483
llvm-svn: 338523
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338494
When lowering calling conventions, prefer to decompose vectors
into the constitute register types. This avoids artifical constraints
to satisfy a wide super-register.
This improves code quality because now optimizations don't need to
deal with the super-register constraint. For example the immediate
folding code doesn't deal with 4 component reg_sequences, so by
breaking the register down earlier the existing immediate folding
code is able to work.
This also avoids the need for the shader input processing code
to manually split vector types.
llvm-svn: 338416
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338387
We could choose a free 0 for this, but this
matches the behavior for fmul undef, 1.0. Also,
the NaN use is more useful for folding use operations
although if it's not eliminated it is more expensive
in terms of code size.
llvm-svn: 338376
Summary:
These instructions interact with hardware blocks outside the shader core,
and they can have "scalar" side effects even when EXEC = 0. We don't
want these scalar side effects to occur when all lanes want to skip
these instructions, so always add the execz skip branch instruction
for basic blocks that contain them.
Also ensure that we skip scalar stores / atomics, though we don't
code-gen those yet.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48431
Change-Id: Ieaeb58352e2789ffd64745603c14970c60819d44
llvm-svn: 338235
SelectionDAGBuilder widens v3i32/v3f32 arguments to
to v4i32/v4f32 which consume an additional register.
In addition to wasting argument space, this produces extra
instructions since now it appears the 4th vector component has
a meaningful value to most combines.
llvm-svn: 338197
R600 can't handle immediates for BFE, these will be eliminated later.
Fixes powr/pow regressions n r600 since r334817
Differential Revision: https://reviews.llvm.org/D49641
llvm-svn: 338127
Scale the offset of VGPR spills by the wave size when it cannot fit in the
12-bit offset immediate field and so is added to the soffset SGPR. This
accounts for hardware swizzling of scratch memory.
Differential Revision: https://reviews.llvm.org/D49448
llvm-svn: 338060
Summary:
We were marking G_EXTRACT operations unsupported if the output type
was larger than the input type. I don't see how this could ever actually
happen, so I dropped the constraint. Doing this makes it possible to
reuse the same legality code for G_INSERT.
Reviewers: arsenm
Reviewed By: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, rovka, kristof.beyls, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D49600
llvm-svn: 337794
Re-apply "[AMDGPU][Waitcnt] fix "comparison of integers of different signs" build error""
( fe0a456510131f268e388c4a18a92f575c0db183 ), which was inadvertantly reverted via
2b2ee080f0164485562593b1b87291a48cea4a9a .
llvm-svn: 337156
Memory legalizer, waitcnt, and shrink passes can perturb the instructions,
which means that the post-RA hazard recognizer pass should run after them.
Otherwise, one of those passes may invalidate the work done by the hazard
recognizer. Note that this has adverse side-effect that any consecutive
S_NOP 0's, emitted by the hazard recognizer, will not be shrunk into a
single S_NOP <N>. This should be addressed in a follow-on patch.
Differential Revision: https://reviews.llvm.org/D49288
llvm-svn: 337154
This reverts commit r337021.
WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x1415cd65 in void write_signed<long>(llvm::raw_ostream&, long, unsigned long, llvm::IntegerStyle) /code/llvm-project/llvm/lib/Support/NativeFormatting.cpp:95:7
#1 0x1415c900 in llvm::write_integer(llvm::raw_ostream&, long, unsigned long, llvm::IntegerStyle) /code/llvm-project/llvm/lib/Support/NativeFormatting.cpp:121:3
#2 0x1472357f in llvm::raw_ostream::operator<<(long) /code/llvm-project/llvm/lib/Support/raw_ostream.cpp:117:3
#3 0x13bb9d4 in llvm::raw_ostream::operator<<(int) /code/llvm-project/llvm/include/llvm/Support/raw_ostream.h:210:18
#4 0x3c2bc18 in void printField<unsigned int, &(amd_kernel_code_s::amd_kernel_code_version_major)>(llvm::StringRef, amd_kernel_code_s const&, llvm::raw_ostream&) /code/llvm-project/llvm/lib/Target/AMDGPU/Utils/AMDKernelCodeTUtils.cpp:78:23
#5 0x3c250ba in llvm::printAmdKernelCodeField(amd_kernel_code_s const&, int, llvm::raw_ostream&) /code/llvm-project/llvm/lib/Target/AMDGPU/Utils/AMDKernelCodeTUtils.cpp:104:5
#6 0x3c27ca3 in llvm::dumpAmdKernelCode(amd_kernel_code_s const*, llvm::raw_ostream&, char const*) /code/llvm-project/llvm/lib/Target/AMDGPU/Utils/AMDKernelCodeTUtils.cpp:113:5
#7 0x3a46e6c in llvm::AMDGPUTargetAsmStreamer::EmitAMDKernelCodeT(amd_kernel_code_s const&) /code/llvm-project/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp:161:3
#8 0xd371e4 in llvm::AMDGPUAsmPrinter::EmitFunctionBodyStart() /code/llvm-project/llvm/lib/Target/AMDGPU/AMDGPUAsmPrinter.cpp:204:26
[...]
Uninitialized value was created by an allocation of 'KernelCode' in the stack frame of function '_ZN4llvm16AMDGPUAsmPrinter21EmitFunctionBodyStartEv'
#0 0xd36650 in llvm::AMDGPUAsmPrinter::EmitFunctionBodyStart() /code/llvm-project/llvm/lib/Target/AMDGPU/AMDGPUAsmPrinter.cpp:192
llvm-svn: 337079
This needs to refer to arguments by their original argument
index, not the argument split index which depends on what
the type splitting decides to do.
Also avoid increment PSInputNum for each split piece.
llvm-svn: 337022
This was completely broken if there was ever a struct argument, as
this information is thrown away during the argument analysis.
The offsets as passed in to LowerFormalArguments are not useful,
as they partially depend on the legalized result register type,
and they don't consider the alignment in the first place.
Ignore the Ins array, and instead figure out from the raw IR type
what we need to do. This seems to fix the padding computation
if the DAG lowering is forced (and stops breaking arguments
following padded arguments if the arguments were only partially
lowered in the IR)
llvm-svn: 337021
SITargetLowering queries SIInstrInfo in its constructor, so SIInstrInfo
must be initialized first. This fixes msan buildbot failures and was
introduced by r336851.
llvm-svn: 336861
Summary:
This is a follow-up to r335942.
- Merge SISubtarget into AMDGPUSubtarget and rename to GCNSubtarget
- Rename AMDGPUCommonSubtarget to AMDGPUSubtarget
- Merge R600Subtarget::Generation and GCNSubtarget::Generation into
AMDGPUSubtarget::Generation.
Reviewers: arsenm, jvesely
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D49037
llvm-svn: 336851
Build error on Android; reported by and fix provided by (thanks) by Mauro Rossi <issor.oruam@gmail.com>
Fixes the following building error:
external/llvm/lib/Target/AMDGPU/SIInsertWaitcnts.cpp:1903:61:
error: comparison of integers of different signs:
'typename iterator_traits<__wrap_iter<MachineBasicBlock **> >::difference_type'
(aka 'int') and 'unsigned int' [-Werror,-Wsign-compare]
BlockWaitcntProcessedSet.end(), &MBB) < Count)) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~
1 error generated.
Differential Revision: https://reviews.llvm.org/D49089
llvm-svn: 336588
These won't work for the forseeable future. These aren't allowed
from OpenCL, but IPO optimizations can make them appear.
Also directly set the attributes on functions, regardless
of the linkage rather than cloning functions like before.
llvm-svn: 336587
Avoid using allocateKernArg / AssignFn. We do not want any
of the type splitting properties of normal calling convention
lowering.
For now at least this exists alongside the IR argument lowering
pass. This is necessary to handle struct padding correctly while
some arguments are still skipped by the IR argument lowering
pass.
llvm-svn: 336373
Wait states are not properly being inserted after buffer_store for v_interp instructions.
Add VALU to V_INTERP instructions so that the GCNHazardRecognizer can
check and insert the appropriate wait states when needed.
Differential Revision: https://reviews.llvm.org/D48772
Change-Id: Id540c9b074fc69b5c1de6b182276aa089c74aa64
llvm-svn: 336339
Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
llvm-svn: 336073
Summary:
We could split sizes that are not power of two into smaller sized
G_IMPLICIT_DEF instructions, but this ends up generating
G_MERGE_VALUES instructions which we then have to handle in the instruction
selector. Since G_IMPLICIT_DEF is really a no-op it's easier just to
keep everything that can fit into a register legal.
Reviewers: arsenm
Reviewed By: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, rovka, kristof.beyls, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48777
llvm-svn: 336041
This was introducing unnecessary padding after the explicit
arguments, depending on the alignment of the total struct type.
Also has the side effect of avoiding creating an extra GEP for
the offset from the base kernel argument to the explicit kernel
argument offset.
llvm-svn: 335999
This allows to hoist code portion to compute reciprocal of loop
invariant denominator in integer division after codegen prepare
expansion.
Differential Revision: https://reviews.llvm.org/D48604
llvm-svn: 335988
Summary:
We now have two sets of generated TableGen files, one for R600 and one
for GCN, so each sub-target now has its own tables of instructions,
registers, ISel patterns, etc. This should help reduce compile time
since each sub-target now only has to consider information that
is specific to itself. This will also help prevent the R600
sub-target from slowing down new features for GCN, like disassembler
support, GlobalISel, etc.
Reviewers: arsenm, nhaehnle, jvesely
Reviewed By: arsenm
Subscribers: MatzeB, kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46365
llvm-svn: 335942
This allows hoisting of a common code, for instance if denominator
is loop invariant. Current change is expansion only, adding licm to
the target pass list going to be a separate patch. Given this patch
changes to codegen are minor as the expansion is similar to that on
DAG. DAG expansion still must remain for R600.
Differential Revision: https://reviews.llvm.org/D48586
llvm-svn: 335868
We have too many mechanisms for tracking the various offsets
used for kernel arguments, so remove one. There's still a lot of
confusion with these because there are two different "implicit"
argument areas located at the beginning and end of the kernarg
segment.
Additionally, the offset was determined based on the memory
size of the split element types. This would break in a future
commit where v3i32 is decomposed into separate i32 pieces.
llvm-svn: 335830
In principle nothing should stop these from working, but
work is necessary to create an ABI for dealing with the stack
related registers.
llvm-svn: 335829
Just fix the crash for now by not doing the optimization since
figuring out how to properly convert the bits for an arbitrary
struct is a pain.
Also fix a crash when there is only an empty struct argument.
llvm-svn: 335827
If a source of rcp instruction is a result of any conversion from
an integer convert it into rcp_iflag instruction. No FP exception
can ever happen except division by zero if a single precision rcp
argument is a representation of an integral number.
Differential Revision: https://reviews.llvm.org/D48569
llvm-svn: 335742
This replaces most argument uses with loads, but for
now not all.
The code in SelectionDAG for calling convention lowering
is actively harmful for amdgpu_kernel. It attempts to
split the argument types into register legal types, which
results in low quality code for arbitary types. Since
all kernel arguments are passed in memory, we just want the
raw types.
I've tried a couple of methods of mitigating this in SelectionDAG,
but it's easier to just bypass this problem alltogether. It's
possible to hack around the problem in the initial lowering,
but the real problem is the DAG then expects to be able to use
CopyToReg/CopyFromReg for uses of the arguments outside the block.
Exposing the argument loads in the IR also has the advantage
that the LoadStoreVectorizer can merge them.
I'm not sure the best approach to dealing with the IR
argument list is. The patch as-is just leaves the IR arguments
in place, so all the existing code will still compute the same
kernarg size and pointlessly lowers the arguments.
Arguably the frontend should emit kernels with an empty argument
list in the first place. Alternatively a dummy array could be
inserted as a single argument just to reserve space.
This does have some disadvantages. Local pointer kernel arguments can
no longer have AssertZext placed on them as the equivalent !range
metadata is not valid on pointer typed loads. This is mostly bad
for SI which needs to know about the known bits in order to use the
DS instruction offset, so in this case this is not done.
More importantly, this skips noalias arguments since this pass
does not yet convert this to the equivalent !alias.scope and !noalias
metadata. Producing this metadata correctly seems to be tricky,
although this logically is the same as inlining into a function which
doesn't exist. Additionally, exposing these loads to the vectorizer
may result in degraded aliasing information if a pointer load is
merged with another argument load.
I'm also not entirely sure this is preserving the current clover
ABI, although I would greatly prefer if it would stop widening
arguments and match the HSA ABI. As-is I think it is extending
< 4-byte arguments to 4-bytes but doesn't align them to 4-bytes.
llvm-svn: 335650
Note a normal select test is not currently possible because this
relies on input registers tracked in SIMachineFunctionInfo which
are not currently serializable in MIR, but this does work end-to-end
from the IR.
llvm-svn: 335490
This should avoid relying on the pointee type
to get the alignment, particularly since pointee
types are supposed to be removed at some point.
Also fixes not getting the alignment for unsized types.
llvm-svn: 335478
Implements PR34259
Intrinsics.h is a very popular header. Most LLVM TUs care about things
like dbg_value, but they don't care how they are implemented. After I
split these out, IntrinsicImpl.inc is 1.7 MB, so this saves each LLVM TU
from scanning 1.7 MB of source that gets pre-processed away.
It also means we can modify intrinsic properties without triggering a
full rebuild, but that's probably less of a win.
I think the next best thing to do would be to split out the target
intrinsics into their own header. Very, very few TUs care about
target-specific intrinsics. It's very hard to split up the target
independent intrinsics like llvm.expect, assume, and dbg.value, though.
llvm-svn: 335407
Not sure why the 32/64 split is needed in the atomic_load
store hierarchies. The regular PatFrags do this, but we don't
do it for the existing handling for global.
llvm-svn: 335325
Summary:
We can select all instructions that are marked as legal in a full piglit run,
so now is a good time to make the TableGen'd instruction selector default
for all opcodes. This is NFC for a full piglit run, which is why there are
no tests.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, rovka, kristof.beyls, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48198
llvm-svn: 335319
Update AMDGPU assembler syntax behind the code-object-v3 feature:
* Replace/rename most AMDGPU assembler directives/symbols and document them.
* Provide more diagnostics (e.g. values out of range, missing values, repeated
values).
* Provide path for backwards compatibility, even with underlying descriptor
changes.
Differential Revision: https://reviews.llvm.org/D47736
llvm-svn: 335281
BlockWaitcntProcessedSet was not being cleared between calls, so it was
producing incorrect counts in cases where MBB addresses happened to coincide
across multiple calls.
Differential Revision: https://reviews.llvm.org/D48391
llvm-svn: 335268
and everything that comes with it from implementation
and v3 header files.
Leave definition in v2 header files for backwards
compatibility.
Differential Revision: https://reviews.llvm.org/D48191
llvm-svn: 335267
Summary:
For sample and gather ops, we can accurately determine the set of
vaddr-size instruction variants that are required. This reduces
the size of instruction tables by ~5%.
The number of machine instruction opcodes is reduced from 10002
to 9476.
Change-Id: Ie7fc65d3657b762c7816017fe70b2e9bec644a8a
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D48168
llvm-svn: 335232
Summary:
This also removes the need for atomic pseudo instructions, since
we select the correct encoding directly in SITargetLowering::lowerImage
for dimension-aware image intrinsics.
Mesa uses dimension-aware image intrinsics since
commit a9a7993441.
Change-Id: I7473d20009476a4ed6d919cae4e6dca9ff42e77a
Reviewers: arsenm, rampitec, mareko, tpr, b-sumner
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48167
llvm-svn: 335231
Summary:
Having TableGen patterns for image intrinsics is hitting limitations:
for D16 we already have to manually pre-lower the packing of data
values, and we will have to do the same for A16 eventually.
Since there is already some custom C++ code anyway, it is arguably easier
to just do everything in C++, now that we can use the beefed-up generic
tables backend of TableGen to provide all the required metadata and map
intrinsics to corresponding opcodes. With this approach, all image
intrinsic lowering happens in SITargetLowering::lowerImage. That code is
dense due to all the cases that it handles, but it should still be easier
to follow than what we had before, by virtue of it all being done in a
single location, and by virtue of not relying on the TableGen pattern
magic that very few people really understand.
This means that we will have MachineSDNodes with MIMG instructions
during DAG combining, but that seems alright: previously we had
intrinsic nodes instead, but those are similarly opaque to the generic
CodeGen infrastructure, and the final pattern matching just did a 1:1
translation to machine instructions anyway. If anything, the fact that
we now merge the address words into a vector before DAG combine should
be an advantage.
Change-Id: I417f26bd88f54ce9781c1668acc01f3f99774de6
Reviewers: arsenm, rampitec, rtaylor, tstellar
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48017
llvm-svn: 335228
Summary:
This allows us to access rich information about MIMG opcodes from C++ code.
Simplifying the mapping between equivalent opcodes of different data size
becomes quite natural.
This also flattens the MIMG-related class and multiclass hierarchy a little,
and collapses together some of the scaffolding for sample and gather4 opcodes.
Change-Id: I1a2549fdc1e881ff100e5393d2d87e73729a0ccd
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48016
llvm-svn: 335227
Summary:
This will allows us to provide rich metadata about the instructions
in tables that are accessible by custom C++ code.
Change-Id: Id9305a26304ab6a6cceb6c65c8cd49141cc0101d
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48011
llvm-svn: 335224
Summary:
Kill instructions sometimes do use SCC in unusual circumstances, when
v_cmpx cannot be used due to the operands that are involved.
Additionally, even if SCC was never defined by the expansion, kill pseudos
could previously occur between an s_cmp and an s_cbranch_scc, which breaks
the SCC liveness tracking when the pseudo is expanded to split the basic
block. While it would be possible to explicitly mark the SCC as live-in for
the successor basic block, it's simpler to just mark the pseudo as using SCC,
so that such a sequence is never emitted by instruction selection in the
first place.
A similar issue affects indirect source/dest pseudos in principle, although
I haven't been able to come up with a test case where it actually matters
(this affects instruction selection, so a MIR test can't be used).
Fixes: dEQP-GLES3.functional.shaders.discard.dynamic_loop_always
Change-Id: Ica8d82ecff1a763b892a1112cf1b06c948863a4f
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47761
llvm-svn: 335223
Summary:
This allows us to reduce the number of different machine instruction
opcodes, which reduces the table sizes and helps flatten the TableGen
multiclass hierarchies.
We can do this because for each hardware MIMG opcode, we have a full set
of IMAGE_xxx_Vn_Vm machine instructions for all required sizes of vdata
and vaddr registers. Instead of having separate D16 machine instructions,
a packed D16 instructions loading e.g. 4 components can simply use the
same V2 opcode variant that non-D16 instructions use.
We still require a TSFlag for D16 buffer instructions, because the
D16-ness of buffer instructions is part of the opcode. Renaming the flag
should help avoid future confusion.
The one non-obvious code change is that for gather4 instructions, the
disassembler can no longer automatically decide whether to use a V2 or
a V4 variant. The existing logic which choose the correct variant for
other MIMG instruction is extended to cover gather4 as well.
As a bonus, some of the assembler error messages are now more helpful
(e.g., complaining about a wrong data size instead of a non-existing
instruction).
While we're at it, delete a whole bunch of dead legacy TableGen code.
Change-Id: I89b02c2841c06f95e662541433e597f5d4553978
Reviewers: arsenm, rampitec, kzhuravl, artem.tamazov, dp, rtaylor
Subscribers: wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47434
llvm-svn: 335222
This is the common case in the BE when we serialize condition and then
rematerialize it. Use either original or inverted condition.
Differential Revision: https://reviews.llvm.org/D48246
llvm-svn: 334882
Try to access pieces 4 bytes at a time. This helps
various hasOneUse extract_vector_elt combines, such
as load width reductions.
Avoids test regressions in a future commit.
llvm-svn: 334836
Summary: The same pattern as D48010, but this one is IR-canonical as of D47428.
Reviewers: nhaehnle, bogner, tstellar, arsenm
Reviewed By: arsenm
Subscribers: arsenm, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #amdgpu
Differential Revision: https://reviews.llvm.org/D48012
llvm-svn: 334817
Summary:
As a followup for D48007.
Since we already handle `x << (bitwidth - y) >> (bitwidth - y)` pattern,
which does not have ub for both the edge cases (`y == 0`, `y == bitwidth`),
i think also handling a pattern that is ub for `y == bitwidth` should be fine.
Reviewers: nhaehnle, bogner, tstellar, arsenm
Reviewed By: arsenm
Subscribers: arsenm, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #amdgpu
Differential Revision: https://reviews.llvm.org/D48010
llvm-svn: 334816
Summary:
D47980 will canonicalize the `x << (32 - y) >> (32 - y)`,
which is the pattern the AMDGPU expects to `x & (-1 >> (32 - y))`,
which is not recognized by AMDGPU.
Thus, it needs to be recognized, too.
Reviewers: nhaehnle, bogner, tstellar, arsenm
Reviewed By: arsenm
Subscribers: arsenm, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #amdgpu
Differential Revision: https://reviews.llvm.org/D48007
llvm-svn: 334815
Currently the handle type is a global pointer which holds 8 bytes.
We need a larger type which hold 16 bytes, therefore change it
to [i64 x 2].
Differential Revision: https://reviews.llvm.org/D48094
llvm-svn: 334625
Summary:
The code that handles ISD:Register and ISD::CopyFromReg assumes
the target is amdgcn, so this is broken on r600. We don't
need this analysis on r600 anyway so we can safely move
it to SITargetLowering.
Reviewers: alex-t, arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: msearles, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46298
llvm-svn: 334607
- Do not emit following assembler directives:
- .hsa_code_object_version
- .hsa_code_object_isa
- .amd_amdgpu_isa
- .amd_amdgpu_hsa_metadata
- .amd_amdgpu_pal_metadata
- Do not emit .note entries
- Cleanup and bring in sync kernel descriptor header file
- Emit kernel descriptor into .rodata with appropriate relocations and
alignments
llvm-svn: 334519
The use iterator, used within findMaskOperands(), can return anything which is
not a def. isUse() requires a register, so check isReg() before calling isUse().
Differential Revision: https://reviews.llvm.org/D48047
llvm-svn: 334459
Rational: if there is indirect access that is usually an issue
because load is not ready by the use. However, if use is inside a
loop and load is outside that is potentially an issue for a first
iteration only.
Differential Revision: https://reviews.llvm.org/D47740
llvm-svn: 334420
AMDGPU inline assembler support i16, half and i128 typed variables in constraints, but they were reported as error.
Needed to fix https://github.com/RadeonOpenCompute/ROCm/issues/341,
e.g. to be able to load with global_load_dwordx4 to a 128bit integer variable
Differential Revision: https://reviews.llvm.org/D44920
llvm-svn: 334301
- Make code easier to maintain.
- Avoid generating waitcnts for VMEM if the address sppace does not involve VMEM.
- Add support to generate waitcnts for LDS and GDS memory.
Differential Revision: https://reviews.llvm.org/D47504
llvm-svn: 334241
This has two main components. First, widen
widen short constant loads in DAG when they have
the correct alignment. This is already done a bit in
AMDGPUCodeGenPrepare, since that has access to
DivergenceAnalysis. This can't help kernarg loads
created in the DAG. Start to use DAG divergence analysis
to help this case.
The second part is to avoid kernel argument lowering
breaking the alignment of short vector elements because
calling convention lowering wants to split everything
into legal register types.
When loading a split type, load the nearest 4-byte aligned
segment and shift to get the desired bits. This extra
load of the earlier argument piece ends up merging,
and the bit extract hopefully folds out.
There are a number of improvements and regressions with
this, but I think as-is this is a better compromise between
several of the worst parts of SelectionDAG.
Particularly when i16 is legal, this produces worse code
for i8 and i16 element vector kernel arguments. This is
partially due to the very weak load merging the DAG does.
It only looks for fairly specific combines between pairs
of loads which no longer appear. In particular this
causes v4i16 loads to be split into 2 components when
previously the two halves were merged.
Worse, because of the newly introduced shifts, there
is a lot more unnecessary vector packing and unpacking code
emitted. At least some of this is due to reporting
false for isTypeDesirableForOp for i16 as a workaround for
the lack of divergence information in the DAG. The cases
where this happens it doesn't actually matter, but the
relevant code in SimplifyDemandedBits doens't have the context
to know to ignore this.
The use of the scalar cache is probably more important
than the mess of mostly scalar instructions doing this packing
and unpacking. Future work can fix this, possibly by making better
use of the new DAG divergence information for controlling promotion
decisions, or adding another version of shift + trunc + shift
combines that doesn't only know about the used types.
llvm-svn: 334180
When denormals are supported we are producing a full division for
1.0f / x. That still can be replaced by the faster version:
bool c = fabs(x) > 0x1.0p+96f;
float s = c ? 0x1.0p-32f : 1.0f;
x *= s;
return s * v_rcp_f32(x)
in case if requested accuracy is 2.5ulp or less. The same version
is used if denormals are not supported for non 1.0 numerators, where
just v_rcp_f32 is then used for 1.0 numerator.
The optimization of 1/x is extended to the case -1/x, which is the
same except for the resulting sign bit.
OpenCL conformance passed with both enabled and disabled denorms.
Differential Revision: https://reviews.llvm.org/D47805
llvm-svn: 334142
Fixes terrible code on targets without f16 support. The
legalization creates a mess that is difficult to recover
from. Also should avoid randomly breaking these tests
multiple times in sequence in future commits.
Some regressions in cases where it happens to be better
to pull the source modifier after the conversion.
llvm-svn: 334132
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
Preserves the low bound of the !range. I don't think
it's legal to do anything with the top half since it's
theoretically reading garbage.
llvm-svn: 334045
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
On GFX9 and earlier, flat memory ops may decrement VMCNT out-of-order as well as LGKMCNT out-of-order.
Differential Revision: https://reviews.llvm.org/D46616
llvm-svn: 333926
Summary:
The new rules are straightforward. The main rules to keep in mind
are:
1. NAME is an implicit template argument of class and multiclass,
and will be substituted by the name of the instantiating def/defm.
2. The name of a def/defm in a multiclass must contain a reference
to NAME. If such a reference is not present, it is automatically
prepended.
And for some additional subtleties, consider these:
3. defm with no name generates a unique name but has no special
behavior otherwise.
4. def with no name generates an anonymous record, whose name is
unique but undefined. In particular, the name won't contain a
reference to NAME.
Keeping rules 1&2 in mind should allow a predictable behavior of
name resolution that is simple to follow.
The old "rules" were rather surprising: sometimes (but not always),
NAME would correspond to the name of the toplevel defm. They were
also plain bonkers when you pushed them to their limits, as the old
version of the TableGen test case shows.
Having NAME correspond to the name of the toplevel defm introduces
"spooky action at a distance" and breaks composability:
refactoring the upper layers of a hierarchy of nested multiclass
instantiations can cause unexpected breakage by changing the value
of NAME at a lower level of the hierarchy. The new rules don't
suffer from this problem.
Some existing .td files have to be adjusted because they ended up
depending on the details of the old implementation.
Change-Id: I694095231565b30f563e6fd0417b41ee01a12589
Reviewers: tra, simon_tatham, craig.topper, MartinO, arsenm, javed.absar
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D47430
llvm-svn: 333900
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
Memory clauses are formed into bundles in presence of xnack.
Their source operands are marked as early-clobber.
This allows to allocate distinct source and destination registers
within a clause and prevent breaking the clause with s_nop in the
hazard recognizer.
Clauses are undone before post-RA scheduler to allow some rescheduling,
which will not break the clause since artificial edges are created in
the dag to keep memory operations together. Yet this allows a better
ILP in some cases.
Differential Revision: https://reviews.llvm.org/D47511
llvm-svn: 333691
Keep track of achieved occupancy in SIMachineFunctionInfo.
At the moment we have a lot of duplicated or even missed code to
query and maintain occupancy info. Record it in the MFI and
query in a single call. Interfaces:
- getOccupancy() - returns current recorded achieved occupancy.
- getMinAllowedOccupancy() - returns lesser of the achieved occupancy
and the lowest occupancy we are ready to tolerate. For example if
a kernel is memory bound we are ready to tolerate 4 waves.
- limitOccupancy() - record occupancy level if we have to lower it.
- increaseOccupancy() - record occupancy if scheduler managed to
increase the occupancy.
MFI takes care of integrating different checks affecting occupancy,
including LDS use and waves-per-eu attribute. Note that scheduler
starts with not yet known register pressure, so has to record either
limit or increase in occupancy after it is done. Later passes can
just query a resulting value.
New interface is used in the active scheduler and NFC wrt its work.
Changes are also made to experimental schedulers to use it and record
an occupancy after they are done. Before the change waves-per-eu was
ignored by experimental schedulers and tolerance window for memory
bound kernels was not used.
Differential Revision: https://reviews.llvm.org/D47509
llvm-svn: 333629
v2: use "ensureAlignment"
make functions cache line aligned
Fixes GPU hangs since r333219:
"AMDGPU: Split R600 AsmPrinter code into its own class"
Differential Revision: https://reviews.llvm.org/D47516
llvm-svn: 333622
This was just emitting loads with the ABI alignment
for the raw type. The true alignment is often better,
especially when an illegal vector type was scalarized.
The better alignment allows using a scalar load
more often.
llvm-svn: 333558
In terms of waitcnt insertion/if necessary, the waitcnt pass forces convergence
for a loop. Previously, that kicked if greater than 2 passes over a loop, which
doesn't account for loop with many bottom blocks. So, increase the threshold to
(n+1), where n is the number of bottom blocks. This gives the pass an
opportunity to consider the contribution of each bottom block, to the overall
loop, before the forced convergence potentially kicks in.
Differential Revision: https://reviews.llvm.org/D47488
llvm-svn: 333556
AFAIK the driver's allocation will actually have to round this
up anyway. It is useful to track the rounded up size, so that
the end of the kernel segment is known to be dereferencable so
a wider s_load_dword can be used for a short argument at the end
of the segment.
llvm-svn: 333456
Summary:
For a block with WQM on entry and exit and containing no exact mode
code, but containing some WWM code, the WQM pass forgot to process the
block at all and so did not insert code to enter and leave WWM.
This commit fixes that.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47027
Change-Id: I044792eead1293bed4203fb26ce75f47878afeb6
llvm-svn: 333362
With the removal of the old waitcnt pass, the '-enable-si-insert-waitcnts' option is obsolete. Remove it.
Differential Revision: https://reviews.llvm.org/D47378
llvm-svn: 333303
This is adoption of HSAIL perfhint pass. Two types of hints are produced:
1. Function is memory bound.
2. Kernel can use wave limiter.
Currently these hints are used in the scheduler. If a function is suspected
to be memory bound we allow occupancy to decrease to 4 waves in the course
of scheduling.
Differential Revision: https://reviews.llvm.org/D46992
llvm-svn: 333289
Summary:
Lower control flow did not correctly handle the case that a loop break
in if/else was on a condition that was not guaranteed to be masked by
exec. The first test kernel shows an example of this going wrong; after
exiting the loop, exec is all ones, even if it was not before the loop.
The fix is for lowering of if-break and else-break to insert an
S_AND_B64 to mask the break condition with exec. This commit also
includes the optimization of not inserting that S_AND_B64 if it is
obviously not needed because the break condition is the result of a
V_CMP in the same basic block.
V2: Addressed some review comments.
V3: Test fixes.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D44046
Change-Id: I0fc56a01209a9e99d1d5c9b0ffd16f111caf200c
llvm-svn: 333258
Summary:
The AMDGPUMCInstLower class is not used outside AMDGPUMCInstLower.cpp,
so we don't need a header file.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47264
llvm-svn: 333254
The integer operation convertion for some reason only happens
if the source is a bitcast from an integer, which happens to
always be the situation when the result is loaded. Add
an additional pattern for when the source operation is really
an FP operation.
llvm-svn: 333019
This usually results in better code. Fixes using
inline asm with short2, and also fixes having a different
ABI for function parameters between VI and gfx9.
Partially cleans up the mess used for lowering of the d16
operations. Making v4f16 legal will help clean this up more,
but this requires additional work.
llvm-svn: 332953
Summary:
MCTargetDesc/AMDGPUMCTargetDesc.h contains enums for all the instuction
and register defintions, which are huge so we only want to include
them where needed.
This will also make it easier if we want to split the R600 and GCN
definitions into separate tablegenerated files.
I was unable to remove AMDGPUMCTargetDesc.h from SIMachineFunctionInfo.h
because it uses some enums from the header to initialize default values
for the SIMachineFunction class, so I ended up having to remove includes of
SIMachineFunctionInfo.h from headers too.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: MatzeB, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46272
llvm-svn: 332930
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
AMDGPUDAGToDAGISel adds DivergenceAnalysis in getAnalysisUsage
but does not list it in pass dependencies which may lead to
crash.
Differential Revision: https://reviews.llvm.org/D47151
llvm-svn: 332862
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Eliminate loads from the dispatch packet when they will have
a known value.
Also pattern match the code used by the library to handle partial
workgroup dispatches, which isn't necessary if reqd_work_group_size
is used.
llvm-svn: 332771
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
Summary:
The current StructurizeCFG pass only works for CFG with one exit. AMDGPUUnifyDivergentExitNodes combines multiple "return" blocks and/or "unreachable" blocks
to one exit block for the Structurizer to work. However, infinite loop is another kind of special "exit", and if we don't handle it, the case of multiple exits will prevent the structurizer from working.
In this work, for each infinite loop, we add a dummy edge to the "return" block, and thus the AMDGPUUnifyDivergentExitNodes pass will work with infinite loops.
This will make CFG with infinite loops be structurized.
Reviewer:
nhaehnle
Differential Revision:
https://reviews.llvm.org/D46340
llvm-svn: 332625
It is legal for the type passed to isLegalAddressingMode to be
unsized or, more specifically, VoidTy. In this case, we must
check the legality of load / stores for all legal types. Directly
trying to call getTypeStoreSize is incorrect, and leads to breakage
in e.g. Loop Strength Reduction. This change guards against that
behaviour.
Differential Revision: https://reviews.llvm.org/D40405
llvm-svn: 332409
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
This pass is
a) broken.
b) r600 specific.
Fixing (a) is a bit more non-trivial, but fixing (b)
is easy. Move this pass to being R600 only for now.
This pass does pass all the unit tests, however clang
no longer generates code that looks like the unit test
input, so fixing the pass requires fixing the tests and
the pass as one, and checking it works with clang still.
Patch by Dave Airlie
llvm-svn: 332196
We cannot query this attribute from a subtarget given a machine function.
At this point attribute itself is already unavailable and can only be
obtained through MFI.
Differential Revision: https://reviews.llvm.org/D46781
llvm-svn: 332166
Summary:
We have no logic to promote alloca to vector for an AddrSpaceCast instruction.
Reviewer:
arsenm
Differential Revision:
https://reviews.llvm.org/D45993
llvm-svn: 332147
Remove a useless SwitchSection which also causes compilation failure
when IR contains comdat.
The SwitchSection is useless because the current section is already
correct text section for the function therefore no need to switch.
It causes compilation failure for comdat because functions with comdat
has specific text section, not the default .text section.
Since HIP uses comdat, this bug caused failures for HIP.
Differential Revision: https://reviews.llvm.org/D46770
llvm-svn: 332137
If a multiply is truncated, SimplifyDemandedBits
sometimes turns a zero_extend of the inputs into an
any_extend, which makes the known bits computation unhelpful.
Ignore these and compute known bits for the underlying value,
since we insert the correct extend type after.
llvm-svn: 331919
This is an extension of an existing combine to reduce wider
shls if the result fits in the final result type. This
introduces the same combine, but reduces the shift to a middle
sized type to avoid the slow 64-bit shift.
llvm-svn: 331916
If the truncate is only accessing the first element of the vector,
we can use the original source value.
This helps with some combine ordering issues after operations are
lowered to integer operations between bitcasts of build_vector.
In particular it stops unnecessarily materializing the unused
top half of a vector in some cases.
llvm-svn: 331909
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
Summary:
AMDGPU stores a numerical code for the particular GPU variant in EFlags
in the ELF file. This commit provides a mapping from that number into
the machine name for use by objdump-type tools.
Change-Id: Id37fc0bebad443bd89c0080985ce298c4e7e9319
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46587
llvm-svn: 331798
- Report error for invalid dpp_ctrl values.
- Changed the way it is reported, now the error will be emitted into
asm and will work with release build as well.
- Added dpp_ctrl value verifier for codegen.
- Added symbolic constants for dpp_ctrl.
Differential Revision: https://reviews.llvm.org/D46565
llvm-svn: 331775
Remove the old waitcnt pass ( si-insert-waits ), which is no longer maintained
and getting crufty
Differential Revision: https://reviews.llvm.org/D46448
llvm-svn: 331641
Summary:
Previously, all DS ops forced WQM in a pixel shader. That was a hack to
allow for graphics frontends using ds_swizzle to implement explicit
derivatives, on SI/CI at least where DPP is not available. But it forced
WQM for _any_ DS op.
With this commit, DS ops no longer force WQM. Both graphics frontends
(Mesa and LLPC) need to change to issue an explicit llvm.amdgcn.wqm
intrinsic call when calculating explicit derivatives.
The required Mesa change is: "amd/common: use llvm.amdgcn.wqm for
explicit derivatives".
Subscribers: qcolombet, arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46051
Change-Id: I9b745b626fa91bbd66456e6cf41ee07eeea42f81
llvm-svn: 331633
- Predicate D16 patterns on this new feature
- Added this new feature to gfx900/2/4
Differential Revision: https://reviews.llvm.org/D46366
llvm-svn: 331551
Summary: Adding support for Fast flags in the SDNode to leverage fast math sub flag usage.
Reviewers: spatel, arsenm, jbhateja, hfinkel, escha, qcolombet, echristo, wristow, javed.absar
Reviewed By: spatel
Subscribers: llvm-commits, rampitec, nhaehnle, tstellar, FarhanaAleen, nemanjai, javed.absar, jbhateja, hfinkel, wdng
Differential Revision: https://reviews.llvm.org/D45710
llvm-svn: 331547
Summary:
This makes is possible to have R600RegisterInfo and SIRegisterInfo
not inherit from AMDGPURegisterInfo.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D46280
llvm-svn: 331490
Summary: performAddCombine should run after DAG is legalized; Otherwise generic optimization
in the DAGCombiner can optimize an addcarry+trunc into an addcarry instruction with
illegal types.
Author: FarhanaAleen
Reviewed By: rampitec
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D46337
llvm-svn: 331368
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
- Add "amdgpu-waitcnt-forcezero" to force all waitcnt instrs to be emitted as s_waitcnt vmcnt(0) expcnt(0) lgkmcnt(0)
- Add debug counters to control force emit of s_waitcnt instrs; debug counters:
si-insert-waitcnts-forceexp: force emit s_waitcnt expcnt(0) instrs
si-insert-waitcnts-forcevm: force emit s_waitcnt lgkmcnt(0) instrs
si-insert-waitcnts-forcelgkm: force emit s_waitcnt vmcnt(0) instrs
- Add some debug statements
Note that a variant of this patch was previously committed/reverted.
Differential Revision: https://reviews.llvm.org/D45888
llvm-svn: 330862
Summary: This is no longer used by mesa since its 18.0.0 release.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D45988
llvm-svn: 330775
If a packed inline constant is sign extended it must be truncated
after the shift. I.e. a constant (0xH0000, 0xHBC00), will be represented
as 0xFFFFFFFFBC000000 in the IR because the immediate is sign extended
to 64 bit. After the value shifted right by 16 to use it in a low part
with op_sel_hi it becomes 0xFFFFFFFFBC00 and does not qualify as inline
constant any longer.
Fixed the error and added verification code. Without the fix and with
the verification bug is causing pk_max_f16_literal.ll to fail.
Differential Revision: https://reviews.llvm.org/D45987
llvm-svn: 330752
It's possible to validly spill the frame offset register
in a call sequence to a VGPR. There are definitely issues
with SGPR spilling to memory, so move the assert later.
llvm-svn: 330612
Also assert that it is correct for SGPRs. There is currently a bug
where stack slot coloring replaces SGPR spill FIs with one with
the default ID, which results in a more confusing assert later
about a dead object.
llvm-svn: 330607
Summary:
Found by inspection. We care about the operand that *doesn't*
contain the immediate.
I believe this is currently not hit because we fold 0xff / 0xffff
immediates only later.
Change-Id: Ic3cf8538bc7da5eff3200d96eccf9d339e6345a7
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45886
llvm-svn: 330586
Summary:
See the new test case; this is really unlikely to happen with real code,
but I ran into this while attempting to bugpoint-reduce a different issue.
Change-Id: I9ade1dc1aa8fd9c4d9fc83661d7b80e310b5c4a6
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45885
llvm-svn: 330585
Summary:
This fixes a case where the argument to a sendmsg intrinsic
ends up in a VGPR, for whatever reason.
The underlying performance issue is that a multiplication that
can be an s_mul_i32 is instead needlessly generated as
v_mul_u32_u24, but this is not addressed by this patch.
Change-Id: I61fd4034314d5acdf6074632c30b65364dfa7328
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45826
llvm-svn: 330393
We should also check that the "bottom" basic block of a loopis a successor of the "header" basic block, otherwise we don't propagate the information correctly when the CFG is complex. This fixes an important rendering problem with Wolfsentein 2, because of one vector-memory wait was missing.
Differential Revision: https://reviews.llvm.org/D43831
llvm-svn: 330337
Summary:
A change to use divergence analysis in the AMDGPU backend was getting formal
arguments incorrect (not tagged as divergent) unless they were VGPR0, VGPR1 or
VGPR2
For graphics shaders it is possible to have more than these passed in as VGPR
Modified the checking code to check for any VGPR registers passed in as formal
arguments.
Also, some intrinsics that are sources of divergence may have been lowered
during instruction selection and are missed on subsequent calls to
isSDNodeSourceOfDivergence - added the relevant AMDGPUISD checks as well.
Finally, the FunctionLoweringInfo tracks virtual registers that are live across
basic block boundaries. This is used to check for divergence of CopyFromRegister
registers using the DivergenceAnalysis analysis. For multiple blocks the lazily
evaluated inverted map VirtReg2Value was not cleared when the ValueMap map was.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45372
Change-Id: I112f3bd6dfe0f62e63ce9b43b893982778e4bee3
llvm-svn: 330257
This patch makes tryCandidate() virtual and some utility functions like
tryLess(), tryGreater(), ... externally available (used to be static).
This makes it possible for a target to derive a new MachineSchedStrategy from
GenericScheduler and reuse most parts.
It was necessary to wrap functions with the same names in
AMDGPU/SIMachineScheduler in a local namespace.
Review: Andy Trick, Florian Hahn
https://reviews.llvm.org/D43329
llvm-svn: 329884
Summary:
This fixes the number of SGPRs and VGPRs in the *_RSRC1 register to
allow for registers set up in wave dispatch, even if those registers are
not used in the shader.
Re-landed after noticing that the buildbot failure from 329808 seemed to
be unrelated.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45503
Change-Id: I6575f0e0d2a528d1319d0b289f0ebe4510fa5771
llvm-svn: 329826
Two issues were fixed:
runtime has difficulty to allocate memory for an external symbol of a
kernel and set the address of the external symbol, therefore make the runtime
handle of an enqueued kernel an ordinary global variable. Runtime only needs
to store the address of the loaded kernel to the handle and has verified
that this approach works.
handle the situation where __enqueue_kernel* gets inlined therefore
the enqueued kernel may be used through a constant expr instead
of an instruction.
Differential Revision: https://reviews.llvm.org/D45187
llvm-svn: 329815
This reverts 329808. That change caused a report of a failure in
test/CodeGen/MIR/AMDGPU/mir-canon-multi.mir that I didn't see. I suspect
it is an expensive-check-only error.
Change-Id: I8133f26f15e7d5ec2b09c687c12cd70e918461b0
llvm-svn: 329811
Summary:
This fixes the number of SGPRs and VGPRs in the *_RSRC1 register to
allow for registers set up in wave dispatch, even if those registers are
not used in the shader.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45503
Change-Id: I6575f0e0d2a528d1319d0b289f0ebe4510fa5771
llvm-svn: 329808
Author: Samuel Pitoiset
ds_read_b128 and ds_write_b128 have been recently enabled
under the amdgpu-ds128 option because the performance benefit
is unclear.
Though, using 128-bit loads/stores for the local address space
appears to introduce regressions in tessellation shaders. Not
sure what is broken, but as ds_read_b128/ds_write_b128 are not
enabled by default, just introduce a global option and enable
128-bit only if requested (until it's fixed/used correctly).
v2: - fix regressions in merge-stores.ll and multiple_tails.ll
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
llvm-svn: 329764
Summary:
We would like the UMR debugging tool[0] to be able to provide
disassembly for currently live waves based on plain memory
dumps, and we want to leverage the LLVM disassembler for this.
This mostly works, except that UMR clearly can't provide real
symbol info, so it wants to set DisInfo == nullptr.
[0] https://cgit.freedesktop.org/amd/umr/
Reviewers: arsenm, rampitec, artem.tamazov, dp
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45477
Change-Id: Ibb2c5af2e66f2e100b4702fd81308e1932bc4ee6
llvm-svn: 329715
Summary:
For OS type AMDPAL, the scratch descriptor is loaded from offset 0 of
the GIT, whose 32 bit pointer is in s0 (s8 for gfx9 merged shaders).
This commit fixes that to use offset 0x10 instead of offset 0 for a
compute shader, per the PAL ABI spec.
V2: Ensure s0 (s8 for gfx9 merged shader) is marked live-in when loading
scratch descriptor from GIT.
Reviewers: kzhuravl, nhaehnle, timcorringham
Subscribers: kzhuravl, wdng, yaxunl, t-tye, llvm-commits, dstuttard, nhaehnle, arsenm
Differential Revision: https://reviews.llvm.org/D44468
Change-Id: I93dffa647758e37f613bb5e0dfca840d82e6d26f
llvm-svn: 329690
1. Remove max_scratch_backing_memory_byte_size from kernel header
2. Make it a reserved field
3. Ignore it while parsing assembly for backwards compatibility
4. Bump up minor version of kernel header
Differential Revision: https://reviews.llvm.org/D45452
llvm-svn: 329620
Author: Samuel Pitoiset
ds_read_b128 and ds_write_b128 have been recently enabled
under the amdgpu-ds128 option because the performance benefit
is unclear.
Though, using 128-bit loads/stores for the local address space
appears to introduce regressions in tessellation shaders. Not
sure what is broken, but as ds_read_b128/ds_write_b128 are not
enabled by default, just introduce a global option and enable
128-bit only if requested (until it's fixed/used correctly).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
llvm-svn: 329591
Summary:
This fixes AMDGPU GlobalISel test failures when enabling the AMDGPU
target without any other targets that use GlobalISel.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, rovka, kristof.beyls, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D45353
llvm-svn: 329588
Currently it is 6. If the "feature" was not used, report dummy
hidden argument. Otherwise it does not match the kernarg size
reported in the kernel header.
Differential Revision: https://reviews.llvm.org/D45129
llvm-svn: 329341
For schedule models that don't use itineraries, checkCompleteness still checks that an instruction has a matching itinerary instead of skipping and going straight to matching the InstRWs. That doesn't seem to match what happens in TargetSchedule.cpp
This patch causes problems for a number of models that had been incorrectly flagged as complete.
Differential Revision: https://reviews.llvm.org/D43235
llvm-svn: 329280
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
Summary:
These new image intrinsics contain the texture type as part of
their name and have each component of the address/coordinate as
individual parameters.
This is a preparatory step for implementing the A16 feature, where
coordinates are passed as half-floats or -ints, but the Z compare
value and texel offsets are still full dwords, making it difficult
or impossible to distinguish between A16 on or off in the old-style
intrinsics.
Additionally, these intrinsics pass the 'texfailpolicy' and
'cachectrl' as i32 bit fields to reduce operand clutter and allow
for future extensibility.
v2:
- gather4 supports 2darray images
- fix a bug with 1D images on SI
Change-Id: I099f309e0a394082a5901ea196c3967afb867f04
Reviewers: arsenm, rampitec, b-sumner
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D44939
llvm-svn: 329166
Summary:
When an i1-value is defined inside of a loop and used outside of it, we
cannot simply use the SGPR bitmask from the loop's last iteration.
There are also useful and correct cases of an i1-value being copied between
basic blocks, e.g. when a condition is computed outside of a loop and used
inside it. The concept of dominators is not sufficient to capture what is
going on, so I propose the notion of "lane-dominators".
Fixes a bug encountered in Nier: Automata.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103743
Change-Id: If37b969ddc71d823ab3004aeafb9ea050e45bd9a
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D40547
llvm-svn: 329164
Summary: There are no packed instructions for min3 or max3. So, performMinMaxCombine should not optimize vectors of f16 to min3/max3.
Author: FarhanaAleen
Reviewed By: arsenm
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D45219
llvm-svn: 329131
Summary:
This is in preparation for the new dimension-aware image intrinsics,
which I'd rather not have to list here by hand.
Change-Id: Iaa16e3a635a11283918ce0d9e1e618591b0bf6fa
Reviewers: arsenm, rampitec, b-sumner
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D44938
llvm-svn: 328939
Summary:
Avoids having to list all intrinsics manually.
This is in preparation for the new dimension-aware image intrinsics,
which I'd rather not have to list here by hand.
Change-Id: If7ced04998397ef68c4cb8f7de66b5050fb767e5
Reviewers: arsenm, rampitec, b-sumner
Subscribers: kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D44937
llvm-svn: 328938
Summary:
The phase attempts to transform operations that extract a portion of a value
into an SDWA src operand in cases where that value is used only once. It
was not prepared for this use to be the preserved portion of a value for
dst:UNUSED_PRESERVE, resulting in a crash or assert.
This change either rejects the illegal SDWA attempt, or in the case where
dst:WORD_1 and the src_sel would be WORD_0, removes the unneeded
extract instruction.
Reviewers: arsenm, #amdgpu
Reviewed By: arsenm, #amdgpu
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D44364
llvm-svn: 328856
While the stack access instructions don't care about
alignment > 4, some transformations on the pointer calculation
do make assumptions based on knowing the low bits of a pointer
are 0. If a stack object ends up being accessed through its
absolute address (relative to the kernel scratch wave offset),
the addressing expression may depend on the stack frame being
properly aligned. This was breaking in a testcase due to the
add->or combine.
I think some of the SP/FP handling logic is still backwards,
and overly simplistic to support all of the stack features.
Code which tries to modify the SP with inline asm for example
or variable sized objects will probably require redoing this.
llvm-svn: 328831
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
This reverts commit 0daf86291d3aa04d3cc280cd0ef24abdb0174981.
It was causing an assert in test/CodeGen/AMDGPU/amdpal.ll only on a
release-with-asserts build. I will resubmit the change when I have fixed
that.
Change-Id: If270594eba27a7dc4076bdeab3fa8e6bfda3288a
llvm-svn: 328695
Summary:
For OS type AMDPAL, the scratch descriptor is loaded from offset 0 of
the GIT, whose 32 bit pointer is in s0 (s8 for gfx9 merged shaders).
This commit fixes that to use offset 0x10 instead of offset 0 for a
compute shader, per the PAL ABI spec.
Reviewers: kzhuravl, nhaehnle, timcorringham
Subscribers: kzhuravl, wdng, yaxunl, t-tye, llvm-commits, dstuttard, nhaehnle, arsenm
Differential Revision: https://reviews.llvm.org/D44468
Change-Id: I93dffa647758e37f613bb5e0dfca840d82e6d26f
llvm-svn: 328673
Before this was not done if the function had no calls in it. This
is still a possible issue with any callable function, regardless
of calls present.
llvm-svn: 328659
The combine on a select of a load only triggers for
addrspace 0, and discards the MachinePointerInfo. The
conservative default needs to be used for this.
llvm-svn: 328652
In a function, s5 is used as the frame base SGPR. If a function
is calling another function, during the call sequence
it is copied to a preserved SGPR and restored.
Before it was possible for the scheduler to move stack operations
before the restore of s5, since there's nothing to associate
a frame index access with the restore.
Add an implicit use of s5 to the adjcallstack pseudo which ends
the call sequence to preven this from happening. I'm not 100%
satisfied with this solution, but I'm not sure what else would be
better.
llvm-svn: 328650
Summary:
llvm-objdump now disassembles unrecognised opcodes as data, using
the .long directive. We treat unrecognised opcodes as being 32 bit
values, so move along 4 bytes rather than the single byte which
previously resulted in a cascade of bogus disassembly following an
unrecognised opcode.
While no solution can always disassemble code that contains
embedded data correctly this provides a significant improvement.
The disassembler will now cope with an arbitrary length section
as it no longer truncates it to a multiple of 4 bytes, and will
use the .byte directive for trailing bytes.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D44685
llvm-svn: 328553
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Reviewers: tstellar, RKSimon, arsenm
Reviewed By: arsenm
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D44856
llvm-svn: 328429
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
- Remove use of the opencl and amdopencl environment member of the target triple for the AMDGPU target.
- Use function attribute to communicate to the AMDGPU backend to add implicit arguments for OpenCL kernels for the AMDHSA OS.
Differential Revision: https://reviews.llvm.org/D43736
llvm-svn: 328349
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
Summary:
The docs already claim that this happens, but so far it hasn't. As a
consequence, existing TableGen files get this wrong a lot, but luckily
the fixes are all reasonably straightforward.
To make this work with all the existing forms of self-references (since
the true type of a record is only built up over time), the lookup of
self-references in !cast is delayed until the final resolving step.
Change-Id: If5923a72a252ba2fbc81a889d59775df0ef31164
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D44475
llvm-svn: 327849
Normally DCE kills these, but at -O0 these get left behind
leaving suspicious looking illegal copies.
Replace with IMPLICIT_DEF to avoid iterator issues.
llvm-svn: 327842
Since the enqueued kernels have internal linkage, their names may be dropped.
In this case, give them unique names __amdgpu_enqueued_kernel or
__amdgpu_enqueued_kernel.n where n is a sequential number starting from 1.
Differential Revision: https://reviews.llvm.org/D44322
llvm-svn: 327291
r327171 "Improve Dependency analysis when doing multi-node Instruction Selection"
r328170 "[DAG] Enforce stricter NodeId invariant during Instruction selection"
Reverting patch as NodeId invariant change is causing pathological
increases in compile time on PPC
llvm-svn: 327197
Instruction Selection makes use of the topological ordering of nodes
by node id (a node's operands have smaller node id than it) when doing
cycle detection. During selection we may violate this property as a
selection of multiple nodes may induce a use dependence (and thus a
node id restriction) between two unrelated nodes. If a selected node
has an unselected successor this may allow us to miss a cycle in
detection an invalid selection.
This patch fixes this by marking all unselected successors of a
selected node have negated node id. We avoid pruning on such negative
ids but still can reconstruct the original id for pruning.
In-tree targets have been updated to replace DAG-level replacements
with ISel-level ones which enforce this property.
This preemptively fixes PR36312 before triggering commit r324359 relands
Reviewers: craig.topper, bogner, jyknight
Subscribers: arsenm, nhaehnle, javed.absar, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43198
llvm-svn: 327170
Summary: Starting from GCN 2nd generation, ISA supports ds_read_b128 on top of ds_read_b64.
This patch supports ds_read_b128 instruction pattern and generation of this instruction.
In the vectorizer, this patch also widen the vector length so that vectorizer generates
128 bit loads for local address-space which gets translated to ds_read_b128.
Since the performance benefit is not clear; compiler generates ds_read_b128 under -amdgpu-ds128.
Author: FarhanaAleen
Reviewed By: rampitec, arsenm
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D44210
llvm-svn: 327153
Summary: GCN ISA supports instructions that can read 16 consecutive dwords from memory through the scalar data cache;
loadstoreVectorizer should take advantage of the wider vector length and pack 16/8 elements of dwords/quadwords.
Author: FarhanaAleen
Reviewed By: rampitec
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D44179
llvm-svn: 326910
The code checks Level == AfterLegalizeDAG which is the fourth and last of the possible DAG combine stages that we have.
There is a Level called AfterLegalVectorOps, but that's the third DAG combine and it doesn't always run.
A function called isAfterLegalVectorOps should imply it returns true in either of the DAG combines that runs after the legalize vector ops stage, but that's not what this function does.
llvm-svn: 326832
In case if -mattr used to modify feature set bits in llvm-mc call
getIsaVersion can fail to identify specific ISA due to test mismatch.
Adding default fallback tests which will always correctly report at
least major version.
Differential Revision: https://reviews.llvm.org/D44163
llvm-svn: 326825
One addrspacecast disappeared in clang emitted IR for
block invoke function due to adoption of the new
addr space mapping.
Differential Revision: https://reviews.llvm.org/D43785
llvm-svn: 326806
i16 capable ASICs do not support i16 operands for this instruction.
Add tablegen pattern to merge chained i16 additions.
Differential Revision: https://reviews.llvm.org/D43985
llvm-svn: 326535
Summary:
For use by LLPC SPV_AMD_shader_ballot extension.
The v_writelane instruction was already implemented for use by SGPR
spilling, but I had to add an extra dummy operand tied to the
destination, to represent that all lanes except the selected one keep
the old value of the destination register.
.ll test changes were due to schedule changes caused by that new
operand.
Differential Revision: https://reviews.llvm.org/D42838
llvm-svn: 326353
Summary:
With OS type AMDPAL, the scratch descriptor is hardwired to be loaded
from offset 0 of the global information table, whose low pointer is
passed in s0. For a merge shader on gfx9+, it needs to be s8 instead, as
the hardware reserves s0-s7.
Reviewers: kzhuravl
Subscribers: arsenm, nhaehnle, dstuttard, llvm-commits, t-tye, yaxunl, wdng, kzhuravl
Differential Revision: https://reviews.llvm.org/D42203
llvm-svn: 326088
V_SUBBREV_U32 is a commute opcode for V_SUBB_U32. However, when
we try to commute V_SUBB_U32 in order to shrink it we do not then
process V_SUBBREV_U32 and it stay VOP3. This is fixed.
Differential Revision: https://reviews.llvm.org/D43699
llvm-svn: 326011
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Summary:
This handles def-after-use of physregs, and allows us to merge loads and
stores even across some physreg defs (typically M0 defs).
Change-Id: I076484b2bda27c2cf46013c845a0380c5b89b67b
Reviewers: arsenm, mareko, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D42647
llvm-svn: 325882
Summary:
.NAME is a bit of an odd duck, in that we should really treat it like
a template argument, but we currently don't, and so when and where
NAME is initialized and how is pretty inconsistent. Best to just avoid
using it as a field of already instantiated records, and use cast to
string instead.
Change-Id: I5a0c202401cede3d5c3827ab9c7858ea48b29108
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D43551
llvm-svn: 325794
Summary:
The machine instruction scheduler was illegally moving a buffer store
past a buffer load with the same descriptor and offset. Fixed by marking
buffer ops as mayAlias and isAliased. This may be overly conservative,
and we may need to revisit.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D43332
Change-Id: Iff3173d9e0653e830474546276ab9d30318b8ef7
llvm-svn: 325567
Summary: GCN ISA supports instructions that can read 16 consecutive dwords from memory through the scalar data cache; loadstoreVectorizer should take advantage of the wider vector length and pack 16/8 elements of dwords/quadwords.
Author: FarhanaAleen
Reviewed By: rampitec
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D43275
llvm-svn: 325518
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Stanislav Mekhanoshin, Tom Stellard.
llvm-svn: 325425
Summary:
This patch extends the promotion of alloca to vector to the arrays of up to 16 elements. Also we introduce
an option, -disable-promote-alloca-to-vector, to switch promotion to vector off, if needed.
Reviewers:
arsenm
Differential Revision:
https://reviews.llvm.org/D33559
llvm-svn: 325372
Summary:
In the current implementation of GPR Indexing Mode when the index is of non-uniform, the s_set_gpr_idx_off instruction
is incorrectly inserted after the loop. This will lead the instructions with vgpr operands (v_readfirstlane for example) to read incorrect
vgpr.
In this patch, we fix the issue by inserting s_set_gpr_idx_on/off immediately around the interested instruction.
Reviewers:
rampitec
Differential Revision:
https://reviews.llvm.org/D43297
llvm-svn: 325355
Kernel arguments likely read by all workitems and should not bypass
cache. Fixes performance hit in sub-dword argument loads.
Differential Revision: https://reviews.llvm.org/D43249
llvm-svn: 325146
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
AMDGPUPromoteAlloca pass to cease using:
1) The old getAlignment() API of MemoryIntrinsic in favour of getting source & dest specific
alignments through the new API.
2) The old IRBuilder createMemCpy/createMemMove single-alignment APIs in favour of the new
API that allows setting source and destination alignments independently.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, r323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324774
Right now this loops over the entire function every time there
is a change, which is not very efficient. There's no practical
reason to track this so globally, since the code motion optimization
passes should be sinking instructions with single uses and
the pass currently will not fold with multiple uses.
llvm-svn: 324667
The code reusing existing wait counts is incorrect since it keeps
adding new operands to an old instruction instead of replacing
the immediate. It was also effectively switched off by the condition
that wait count is not an AMDGPU::S_WAITCNT.
Also switched to BuildMI instead of creating instructions directly.
Differential Revision: https://reviews.llvm.org/D42997
llvm-svn: 324547
Note: This is a candidate for LLVM 6.0, because it was planned to be
in that release but was delayed due to a long review period.
Merge conflict in release_60 - resolution:
Add "-p6:32:32" into the second (non-amdgiz) string.
Only scalar loads support 32-bit pointers. An address in a VGPR will
fail to compile. That's OK because the results of loads will only be used
in places where VGPRs are forbidden.
Updated AMDGPUAliasAnalysis and used SReg_64_XEXEC.
The tests cover all uses cases we need for Mesa.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D41651
llvm-svn: 324487
Summary:
I checked the AMD closed source compiler and the workaround is only
needed when x3 is emulated as x4, which we don't do in LLVM.
SMEM x3 opcodes don't exist, and instead there is a possibility to use x4
with the last component being unused. If the last component is out of
buffer bounds and falls on the next 4K page, the hw hangs.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D42756
llvm-svn: 324486
1. Run the memory legalizer prior to the waitcnt pass; keep the policy that the waitcnt pass does not remove any waitcnts within the incoming IR.
2. The waitcnt pass doesn't (yet) track waitcnts that exist prior to the waitcnt pass (it just skips over them); because the waitcnt pass is ignorant of them, it may insert a redundant waitcnt. To avoid this, check the prev instr. If it and the to-be-inserted waitcnt are the same, suppress the insertion. We keep the existing waitcnt under the assumption that whomever, e.g., the memory legalizer, inserted it knows what they were doing.
3. Follow-on work: teach the waitcnt pass to record the pre-existing waitcnts for better waitcnt production.
Differential Revision: https://reviews.llvm.org/D42854
llvm-svn: 324440
It was always using cmpxchg path and in rmw and cmpxchg instructions
are not distinguishable in the BE.
Differential Revision: https://reviews.llvm.org/D42976
llvm-svn: 324383
Summary:
Now we generate PAL metadata for the amdpal os type, there is no need to
generate the .AMDGPU.config section.
Reviewers: arsenm, nhaehnle, dstuttard
Subscribers: kzhuravl, wdng, yaxunl, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D37760
Change-Id: I303c5fad66656ce97293da60621afac6595b4c18
llvm-svn: 324346
Mark more opcodes as hasExtraSrcRegAllocReq so that their operands will
be marked as not renamable, to avoid copy forwarding violating the
constraint that only one operand may use the constant bus.
These changes fix a few mis-compiles when copy forwarding is enabled in
MachineCopyPropagation by D41835 (and were reviewed as part of that change).
llvm-svn: 323794
-amdgpu-waitcnt-forcezero={1|0} Force all waitcnt instrs to be emitted as s_waitcnt vmcnt(0) expcnt(0) lgkmcnt(0)
-amdgpu-waitcnt-forceexp=<n> Force emit a s_waitcnt expcnt(0) before the first <n> instrs
-amdgpu-waitcnt-forcelgkm=<n> Force emit a s_waitcnt lgkmcnt(0) before the first <n> instrs
-amdgpu-waitcnt-forcevm=<n> Force emit a s_waitcnt vmcnt(0) before the first <n> instrs
This patch was pushed ( abb190fd51cd2f9a9eef08c024e109f7f7e909fc ), which caused a buildbot failure, reverted ( 6227480d74da507cf8e1b4bcaffbdb9fb875b4b8 ), and then updated to fix buildbot failures (this patch).
Differential Revision: https://reviews.llvm.org/D40091
llvm-svn: 323788
Patch by: Bas Nieuwenhuizen
Just use the _e64 variant if needed. This should be possible as per
def : Pat <
(int_amdgcn_kill (i1 (setcc f32:$src, InlineFPImm<f32>:$imm, cond:$cond))),
(SI_KILL_F32_COND_IMM_PSEUDO $src, (bitcast_fpimm_to_i32 $imm), (cond_as_i32imm $cond))
> ;
I don't think we can get an immediate for the other operand for which we
need the second 32-bit word.
https://reviews.llvm.org/D42302
llvm-svn: 323706
Summary:
Fix a few places that were modifying code after register
allocation to set the renamable bit correctly to avoid failing the
validation added in D42449.
llvm-svn: 323675
Summary:
The improvements to the LegalizerInfo discussed in D42244 require that
LegalizerInfo::LegalizeAction be available for use in other classes. As such,
it needs to be moved out of LegalizerInfo. This has been done separately to the
next patch to minimize the noise in that patch.
llvm-svn: 323669
- using qualified pointer addrspace in intrinsics class to avoid .f32 mangling
- changed too common atomic mangling to ds
- added missing intrinsics to AMDGPUTTIImpl::getTgtMemIntrinsic
Reviewed by: b-sumner
Differential Revision: https://reviews.llvm.org/D42383
llvm-svn: 323516
Summary:
Move reserveRegisterTuples into AMDGPURegisterInfo and use it in
R600RegisterInfo::getReservedRegs and
R600InstrInfo::reserveIndirectRegisters to ensure that all super
registers of reserved registers are also marked as reserved.
Before this change, under certain circumstances, the registers %t1_x and
%t1_xyzw would be marked as reserved, but %t1_xy and %t1_xyz would not
be, leading to the register allocator sometimes assigning a register to
%t1_xy, which is invalid since %t1_x is reserved.
Reviewers: arsenm, tstellar, MatzeB, qcolombet
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D42448
llvm-svn: 323356
- Change inserted add ( V_ADD_{I|U}32_e32 ) to _e64 version ( V_ADD_{I|U}32_e64 ) so that the add uses a vreg for the carry; this prevents inserted v_add from killing VCC; the _e64 version doesn't accept a literal in its encoding, so we need to introduce a mov instr as well to get the imm into a register.
- Change pass name to "SI Load Store Optimizer"; this removes the '/', which complicates scripts.
Differential Revision: https://reviews.llvm.org/D42124
llvm-svn: 323153
Nicolai Haehnle