MVT belongs to the CodeGen layer, but ShuffleDecode is used by the X86 InstPrinter which is part of the MC layer. This only worked because MVT is completely implemented in a header file with no other library dependencies.
Differential Revision: https://reviews.llvm.org/D44353
llvm-svn: 327292
We called MaskedValueIsZero with two different masks, but underneath that calls computeKnownBits before applying the mask. This means we compute the same known bits twice due to the two calls. Instead just call computeKnownBits directly and apply the two masks ourselves.
llvm-svn: 327251
64-bit MMX vector generation usually ends up lowering into SSE instructions before being spilled/reloaded as a MMX type.
This patch creates a MMX vector from MMX source values, taking the lowest element from each source and constructing broadcasts/build_vectors with direct calls to the MMX PUNPCKL/PSHUFW intrinsics.
We're missing a few consecutive load combines that could be handled in a future patch if that would be useful - my main interest here is just avoiding a lot of the MMX/SSE crossover.
Differential Revision: https://reviews.llvm.org/D43618
llvm-svn: 327247
Same as the VPERMILPS/VPERMILPD approach for v8f32/v4f64 cases, rely on PSHUFB using bits[3:0] for indexing - we can ignore the sign bit (zero element) as those index vector values are considered undefined. The select between the lo/hi permute results based on the index size.
llvm-svn: 327242
As VPERMILPS/VPERMILPD only selects elements based on the bits[1:0]/bit[1] then we can permute both the (repeated) lo/hi 128-bit vectors in each case and then select between these results based on whether the index was for for lo/hi.
For v4i64/v4f64 this avoids some rather nasty v4i64 multiples on the AVX2 implementation, which seems to be worse than the extra port5 pressure from the additional shuffles/blends.
llvm-svn: 327239
Helper function to insert a subvector into the bottom elements of a larger zero/undef vector with the same scalar type.
I've converted a couple of INSERT_SUBVECTOR calls to use it, there are plenty more although in some cases I was worried it might make the code more ambiguous.
llvm-svn: 327236
Previously we unpacked the even bytes of each input into the high byte of 16-bit elements then did an v8i16 arithmetic shift right by 8 bits to fill the upper bits of each word with sign bits. Then we did the v8i16 multiply and then masked to zero the upper 8-bits of each result. The similar was done for all the odd bytes. The results are then packed together with packuswb
Since we are masking each multiply result element to 8-bits, and those 8-bits are determined only by the lower 8-bits of each of the inputs, we don't need to fill the upper bits with sign bits. So we can just unpack into the low byte of each element and treat the upper bits as garbage. This is what gcc also does.
Differential Revision: https://reviews.llvm.org/D44267
llvm-svn: 327093
This instruction can be thought of as reading either the even elements of a vXi32 input or the lower half of each element of a vXi64 input. We currently use the vXi32 interpretation, but vXi64 matches better with its broadcast behavior in EVEX.
I'm looking at moving MULDQ/MULUDQ creation to a DAG combine so we can do it when AVX512DQ is enabled without having to go through Custom lowering. But in some of the test cases we failed to use a broadcast load due to the size difference. This should help with that.
I'm also wondering if we can model these instructions in native IR and remove the intrinsics and I think using a vXi64 type will work better with that.
llvm-svn: 326991
The v8i32 conversion on AVX1 targets was only working after LowerMUL splits 256-bit vectors.
While I was there I've also made it so we don't have to check for AVX2 and BWI directly and instead just ask if the type is legal.
Differential Revision: https://reviews.llvm.org/D44190
llvm-svn: 326917
The code checks Level == AfterLegalizeDAG which is the fourth and last of the possible DAG combine stages that we have.
There is a Level called AfterLegalVectorOps, but that's the third DAG combine and it doesn't always run.
A function called isAfterLegalVectorOps should imply it returns true in either of the DAG combines that runs after the legalize vector ops stage, but that's not what this function does.
llvm-svn: 326832
Almost none of these usages were FP specific. And we had no clear guideliness on when to use hasAVX vs hasFP256.
I might also remove hasInt256 too since its an alias for hasAVX2.
llvm-svn: 326682
We were previously doing this with isel patterns. Moving it to op legalization gives us chance to see the required bitcast earlier. And it lets us remove some isel patterns.
llvm-svn: 326669
64-bit MMX constant generation usually ends up lowering into SSE instructions before being spilled/reloaded as a MMX type.
This patch bitcasts the constant to a double value to allow correct loading directly to the MMX register.
I've added MMX constant asm comment support to improve testing, it's better to always print the double values as hex constants as MMX is mainly an integer unit (and even with 3DNow! its just floats).
Differential Revision: https://reviews.llvm.org/D43616
llvm-svn: 326497
Emulated TLS is enabled by llc flag -emulated-tls,
which is passed by clang driver.
When llc is called explicitly or from other drivers like LTO,
missing -emulated-tls flag would generate wrong TLS code for targets
that supports only this mode.
Now use useEmulatedTLS() instead of Options.EmulatedTLS to decide whether
emulated TLS code should be generated.
Unit tests are modified to run with and without the -emulated-tls flag.
Differential Revision: https://reviews.llvm.org/D42999
llvm-svn: 326341
An extract_element where the result type is larger than the scalar element type is semantically an any_extend of from the scalar element type to the result type. If we expect zeroes in the upper bits of the i8/i32 we need to mae sure those zeroes are explicit in the DAG.
For these cases the best way to accomplish this is use an insert_subvector to pad zeroes to the upper bits of the v1i1 first. We extend to either v16i1(for i32) or v8i1(for i8). Then bitcast that to a scalar and finish with a zero_extend up to i32 if necessary. We can't extend past v16i1 because that's the largest mask size on KNL. But isel is smarter enough to know that a zext of a bitcast from v16i1 to i16 can use a KMOVW instruction. The insert_subvectors will be dropped during isel because we can determine that the producing instruction already zeroed the upper bits of the k-register.
llvm-svn: 326308
While the description for the instruction does mention OR, its talking about how the individual classification test results are ORed together.
The incoming mask is used as a zeroing write mask. If the bit is 1 the classification is written to the output. The bit is 0 the output is 0. This equivalent to an AND.
Here is pseudocode from the intrinsics guide
FOR j := 0 to 1
i := j*64
IF k1[j]
k[j] := CheckFPClass_FP64(a[i+63:i], imm8[7:0])
ELSE
k[j] := 0
FI
ENDFOR
k[MAX:2] := 0
llvm-svn: 326306
There's still some shortcoming in our ability to combine binops of constants with different sizes separated by an extend. I'll try to look at that next.
llvm-svn: 326128
Summary:
We have an early DAG combine to turn these patterns into MOVMSK, but that combine doesn't work if the vXi1 type has more elements than the widest legal vXi8 type. Type legalization will eventually split it down to v16i1 or v32i1 and then the bitcast gets legalized to a truncstore and a scalar load. The truncstore will get lowered to a series of extracts and bit math.
This patch adds a custom legalization to use a sign extend and MOVMSK instead. This prevents the eventual scalarization.
Reviewers: spatel, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D43593
llvm-svn: 326119
This code seemed to try to widen to 128, 256, or 512 bit vectors, but we only create X86ISD::AVG with a power of 2 number of elements. This means the only nodes that need to be legalized are less than 128-bits and need to be widened up to 128 bits.
llvm-svn: 326064
Which types are considered 'simple' is a function of the requirements of all targets that LLVM supports. That shouldn't directly affect what types we are able to handle. The remainder of this code checks that the number of elements is a power of 2 and takes care of splitting down to a legal size.
llvm-svn: 326063
Our UMIN/UMAX, vector truncation and shuffle combining is good enough to efficiently handle v8i64 with the number of leading zeros that are necessary for PSUBUS.
llvm-svn: 326034
Now that UMIN etc are Legal/Custom for SSE2+, we can efficiently match SUBUS v8i32 cases from SSSE3 which can perform efficient truncation with PSHUFB.
llvm-svn: 326033
These can be created by type legalization promoting the inputs to select to match scalar boolean contents.
We were trying to pattern match them away during isel, but its better to just remove them from the DAG.
I've cleaned up some patterns to not check for this 'and' anymore. But I suspect this has also opened up opportunities for pattern removal.
llvm-svn: 325949
The test changes you can see are related to the changes in ReplaceNodeResults. Though shuffle-vs-trunc-512.ll does have a test that exercises the code in LowerBITCAST. Looks like the test output didn't change because DAG combining is able to clean up the resulting type legalization. Adding the custom hook just makes type legalization work less hard.
Differential Revision: https://reviews.llvm.org/D43447
llvm-svn: 325933
We won't be able to fold the constant pool load, but its still better than materialing ones and xoring for the invert if we used PCMPEQ.
This will fix another regression from D42948.
llvm-svn: 325845
Previously this code overrode the flags and opcode used by the later code in LowerVSETCC. This makes the code difficult to read and follow.
This patch moves all the SUBUS code into its own function and makes it responsible for creating its own SDNodes on success.
Differential Revision: https://reviews.llvm.org/D43530
llvm-svn: 325827
SimplifyDemandedBits forces the demanded mask to all 1s if the node has multiple uses, unless the AssumeSingleUse flag is set.
So previously we were only really likely to simplify something if the condition had a single use. And on the off chance we did simplify with multiple uses the demanded mask being used was all ones so there was no reason to create a shrunkblend.
This patch now checks that the condition is only used by selects first, and then sets the AssumeSingleUse flag for the simplifcation. Then we convert the selects to shrunkblend, and finally replace condition.
Differential Revision: https://reviews.llvm.org/D43446
llvm-svn: 325604
This allows us to avoid an opsize prefix. And forcing some move immediates to i32 avoids a length changing prefix on those instructions.
This mostly replaces the existing combine we had for zext/sext+cmov of constants. I left in a case for sign extending a 32 bit cmov of constants to 64 bits.
Differential Revision: https://reviews.llvm.org/D43327
llvm-svn: 325601
Previously we used vptestmd, but the scheduling data for SKX says vpmovq2m/vpmovd2m is lower latency. We already used vpmovb2m/vpmovw2m for byte/word truncates. So this is more consistent anyway.
llvm-svn: 325534
We swapped the operands and used setle, but I don't see any reason to do that. I think this is a holdover from SSE where we swap and the invert to use pcmpgt. But with AVX512 we don't want an invert so we won't use pcmpgt. So there's no need to swap.
llvm-svn: 325527
Canonicalize EQ/NE PCMPM to have build vector all zeros on the RHS so we don't have to pattern match it in both locations. This significantly reduces the number of isel patterns needed since we also had to multiply it out with loads being in either operand of the 'and' input node and in the 'and' masking node.
This removes over 24000 bytes from the isel table.
llvm-svn: 325526
We're accidentally checking that the same node is a constant twice instead of checking the other node.
This isn't a functional problem since we didn't do anything below that explicitly requires constants. It just means we may have introduced a sign_extend or zero_extend that won't fold out.
llvm-svn: 325469
Summary:
Currently we convert to shuffles during lowering. This moves it to DAG combine so hopefully we can get it done before type legalization has to extend the condition.
I believe in some cases we're creating SHRUNKBLENDs that end up with constant conditions because we see the extended on the condition and think its a dynamic selelect before DAG combine gets a chance to constant fold the extend. We could add combines to turn SHRUNKBLENDs with constant condition back to vselect. But it seemed like it might be better to just send them to shuffles as early as possible so they never get a chance to become SHRUNKBLENDs. This the reason some tests went from blends controlled by a constant pool load to just move.
Some of the constant pool entries changed because the sign_extend introduced by type legalization turned undef elements in select condition into 0s. While the select->shuffle used -1 in the shuffle mask. So now the shuffle lowering can do what it wants with them.
I'll remove the lowering code as a follow up. We might be able to simplify some of the pre-checks for SHRUNKBLEND as the FIXME there says.
Reviewers: spatel, RKSimon, efriedma, zvi, andreadb
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43367
llvm-svn: 325417
Undef in select condition means we should pick the element from one side or the other. An undef in a shuffle mask means pick any element from either source or worse.
I suspect by the time we get here most of the undefs in a constant vector have been removed by other things, but doing this for safety.
llvm-svn: 325394
This seems to interfere with a target independent brcond combine that looks for the (srl (and X, C1), C2) pattern to enable TEST instructions. Once we flip, that combine doesn't fire and we end up exposing it to the X86 specific BT combine which causes us to emit a BT instruction. BT has lower throughput than TEST.
We could try to make the brcond combine aware of the alternate pattern, but since the flip was just a code size reduction and not likely to enable other combines, it seemed easier to just delay it until after lowering.
Differential Revision: https://reviews.llvm.org/D43201
llvm-svn: 325371
We already do this for 64-bit when it won't fit into a 64-bit AND/TEST's immediate field. This adds an additional qualifier to do it for any single bit constant larger than 8-bits under optsize
Differential Revision: https://reviews.llvm.org/D43346
llvm-svn: 325290
We can use PACKSS to saturate each stage of the chain: PACKSSDW down to [-32768,32767] and then PACKSSWB to [-128,127].
PACKUS is a little trickier and will be handled in a separate patch.
llvm-svn: 325235
Try to keep PACK*SDW/PACK*SWB as wide as possible, this helps ComputeNumSignBits as it can only peek through bitcasts to wider types, pre-AVX2 codegen was already doing this as it could peek through bitcasts/subvectors more easily than AVX2 could through shuffles.
This shouldn't affect existing results as calls to truncateVectorWithPACK ensure we have enough sign bits to pack to the same value, but it should make it possible to use truncateVectorWithPACK chains to perform saturation in combineTruncateWithSat with a future patch.
llvm-svn: 325149
While the AVX512 VTRUNCS/VTRUNCUS instructions require legal types, truncateVectorWithPACK handles cases with multiples of legal types through splitting/concatenation. So we just need to ensure that the src/dst scalar types are correct and leave truncateVectorWithPACK to handle the rest of it.
llvm-svn: 325127
Summary:
Instead of solving the hard problem of how to pass the callee to the indirect
jump thunk without a register, just use a CSR. At a call boundary, there's
nothing stopping us from using a CSR to hold the callee as long as we save and
restore it in the prologue.
Also, add tests for this mregparm=3 case. I wrote execution tests for
__llvm_retpoline_push, but they never got committed as lit tests, either
because I never rewrote them or because they got lost in merge conflicts.
Reviewers: chandlerc, dwmw2
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D43214
llvm-svn: 325049
ISD::ADD implies individual vector element addition with no carries between elements. But for a vXi1 type that would be the same as XOR. And we already turn ISD::ADD into ISD::XOR for all vXi1 types during lowering. So the ISD::ADD pattern would never be able to match anyway.
KADD is different, it adds the elements but also propagates a carry between them. This just a way of doing an add in k-register without bitcasting to the scalar domain. There's still no way to match the pattern, but at least its not obviously wrong.
llvm-svn: 324861
Summary:
Currently we only use min/max to help with ule/uge compares because it removes an invert of the result that would otherwise be needed. But we can also use it for ult/ugt compares if it will prevent the need for a sign bit flip needed to use pcmpgt at the cost of requiring an invert after the compare.
I also refactored the code so that the max/min code is self contained and does its own return instead of setting up a flag to manipulate the rest of the function's behavior.
Most of the test cases look ok with this. I did notice that we added instructions when one of the operands being sign flipped is a constant vector that we were able to constant fold the flip into.
I also noticed that sometimes the SSE min/max clobbers a register that is needed after the compare. This resulted in an extra move being inserted before the min/max to preserve the register. We could try to detect this and switch from min to max and change the compare operands to use the operand that gets reused in the compare.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42935
llvm-svn: 324842
This allows us to recognise more saturation patterns and also simplify some MINMAX codegen that was failing to combine CMPGE comparisons to a legal CMPGT.
Differential Revision: https://reviews.llvm.org/D43014
llvm-svn: 324837
This patch adds a new function attribute "required-vector-width" that can be set by the frontend to indicate the maximum vector width present in the original source code. The idea is that this would be set based on ABI requirements, intrinsics or explicit vector types being used, maybe simd pragmas, etc. The backend will then use this information to determine if its save to make 512-bit vectors illegal when the preference is for 256-bit vectors.
For code that has no vectors in it originally and only get vectors through the loop and slp vectorizers this allows us to generate code largely similar to our AVX2 only output while still enabling AVX512 features like mask registers and gather/scatter. The loop vectorizer doesn't always obey TTI and will create oversized vectors with the expectation the backend will legalize it. In order to avoid changing the vectorizer and potentially harm our AVX2 codegen this patch tries to make the legalizer behavior similar.
This is restricted to CPUs that support AVX512F and AVX512VL so that we have good fallback options to use 128 and 256-bit vectors and still get masking.
I've qualified every place I could find in X86ISelLowering.cpp and added tests cases for many of them with 2 different values for the attribute to see the codegen differences.
We still need to do frontend work for the attribute and teach the inliner how to merge it, etc. But this gets the codegen layer ready for it.
Differential Revision: https://reviews.llvm.org/D42724
llvm-svn: 324834
We promote these via a DAG combine now before lowering gets the chance.
Also remove the v2i1 custom handling since it will no longer be triggered.
llvm-svn: 324833
These were added as part of the refactoring for prefer vector width. At the time I thought the hasAVX512 here would be replaced with "allow 512 bit vectors" so that it would read "allow 512 bit vectors OR VLX". But now the plan is to only give the option of disabling 512 bit vectors when VLX is enabled. So we don't need this qualification at all
llvm-svn: 324831
Summary:
This patch changes the signature of the avx512 packed fp compare intrinsics to return a vXi1 vector and no longer take a mask as input. The casts to scalar type will now need to be explicit in the IR. The masking node will now be an explicit and in the IR.
This makes the intrinsic look much more similar to an fcmp instruction that we wish we could use for these but can't. We already use icmp instructions for integer compares.
Previously the lowering step of isel would turn the intrinsic into an X86 specific ISD node and a emit the masking nodes as well as some bitcasts. This means DAG combines can't see the vXi1 type until somewhat late, making it more difficult to combine out gpr<->mask transition sequences. By exposing the vXi1 type explicitly in the IR and initial SelectionDAG we give earlier DAG combines and even InstCombine the chance to see it and optimize it.
This should make any issues with gpr<->mask sequences the same between integer and fp. Meaning we only have to fix them once.
Reviewers: spatel, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43137
llvm-svn: 324827
Undef VLX, getSetCCResultType returns v2i1/v4i1 for v2f32/v4f32 so default type legalization will end up changing the setcc result type back to vXi1 if it had been extended. The resulting extend gets messed up further by type legalization and is difficult to recombine back to (v4i32 (setcc (v4f32))) after legalization.
I went ahead and enabled this for SSE2 and later since its always the result we want and this helps type legalization get there in less steps.
llvm-svn: 324822
This prevents extends of masks being introduced during lowering where it become difficult to combine them out.
There are a few oddities in here.
We sometimes concatenate two k-registers produced by two compares, sign_extend the combined pair, then extract two halves. This worked better previously because the sign_extend wasn't created until after the fp_to_sint was split which led to a split sign_extend being created.
We probably also need to custom type legalize (v2i32 (sext v2i1)) via widening.
llvm-svn: 324820
This avoids a constant pool load to create 1.
The int->float are showing converts to mask and back. We probably need to widen inputs to sint_to_fp/uint_to_fp before type legalization.
llvm-svn: 324805
Previously we extracted two subvectors and concatenate. But the concatenate will be lowered to two insert subvectors. Then DAG combine will merge once of the inserts and one of the extracts back into the original vector. We might as well just directly use one extract and one insert.
llvm-svn: 324710
This regresses a couple cases in the shuffle combining test. But those cases use intrinsics that InstCombine knows how to turn into a generic shuffle earlier. This should give opportunities to fold this earlier in InstCombine or DAG combine.
llvm-svn: 324709
Most vxi1 constant build vectors have to be implemented in the scalar domain anyway so we'll probably end up with a cast there later. But by then its too late to do the combine to get rid of it.
llvm-svn: 324662
The KTEST instruction sets the C flag if the result of anding both operands together is all 1s. We can use this to lower (icmp eq/ne (bitcast (vXi1 X), -1)
Differential Revision: https://reviews.llvm.org/D42772
llvm-svn: 324577
Summary:
KTEST has weird flag behavior. The Z flag is set for all bits in the AND of the k-registers being 0, and the C flag is set for all bits being 1. All other flags are cleared.
We currently emit this instruction in EmitTEST and don't check the condition code. This can lead to strange things like using the S flag after a KTEST for a signed compare.
The domain reassignment pass can also transform TEST instructions into KTEST and is not protected against the flag usage either. For now I've disabled this part of the domain reassignment pass. I tried to comment out the checks in the mir test so that we could recover them later, but I couldn't figure out how to get that to work.
This patch moves the KTEST handling into LowerSETCC and now creates a ktest+x86setcc. I've chosen this approach because I'd like to add support for the C flag for all ones in a followup patch. To do that requires that I can rewrite the condition code going in the x86setcc to be different than the original SETCC condition code.
This fixes PR36182. I'll file a PR to fix domain reassignment once this goes in. Should this be merged to 6.0?
Reviewers: spatel, guyblank, RKSimon, zvi
Reviewed By: guyblank
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42770
llvm-svn: 324576
We were doing a lot of whitelisting of what we handle in these routines, but setOperationAction constrains what we can get here. So just add some asserts and prune the unreachable paths.
llvm-svn: 324538
that happened to end up in GCC.
This is really unfortunate, as the names don't have much rhyme or reason
to them. Originally in the discussions it seemed fine to rely on aliases
to map different names to whatever external thunk code developers wished
to use but there are practical problems with that in the kernel it turns
out. And since we're discovering this practical problems late and since
GCC has already shipped a release with one set of names, we are forced,
yet again, to blindly match what is there.
Somewhat rushing this patch out for the Linux kernel folks to test and
so we can get it patched into our releases.
Differential Revision: https://reviews.llvm.org/D42998
llvm-svn: 324449
X86 currently has a late DAG combine after cttz/ctlz are turned into BSR+BSF+CMOV to detect this and remove the CMOV. But we should be able to do this much earlier and avoid creating the cmov all together.
For the changed AMDGPU test case it appears that previously the i8 cttz was type legalized to i16 which introduced an OR with 256 in order to limit the result to 8 on the widened type. At this point the result is known to never be zero, but nothing checked that. Then operation legalization is told to promote all i16 cttz to i32. This introduces an extend and a truncate and another OR with 65536 to limit the result to 16. With the DAG combiner change we are able to prevent the creation of the second OR since the opcode will have been changed to cttz_zero_undef after the first OR. I the lack of the OR caused the instruction to change to v_ffbl_b32_sdwa
Differential Revision: https://reviews.llvm.org/D42985
llvm-svn: 324427
Followup to D42544 that matches PACKUSWB cases for non-AVX512, SSE and PACKUSDW cases will have to wait until we can add support for general SMIN/SMAX matching.
llvm-svn: 324347
Followup to D42544 that matches PACKSSWB cases for non-AVX512, SSE and PACKSSDW cases will have to wait until we can add support for general SMIN/SMAX matching.
llvm-svn: 324339
We now allow all signed comparisons and not equal. The complement that needs to be added for this is no worse than the extend. And the vector output forms of pcmpeq/pcmpgt have better latency than the k-register version on SKX.
llvm-svn: 324294
We always created X86ISD::SHUF128 with a 64-bit element type so we can use isel patterns to detect a bitconvert to 32-bit to handle masking.
The test changes are because we also match the bitconvert even if there is no masking. This leads to unnecessary isel pattern, but it requires more multiclass hackery in tablegen to get rid of it.
llvm-svn: 324205
This reduces the number of transitions between k-registers and GPRs, reducing the number of instructions.
There's still some room for improvement to remove more transitions, but this is a good start.
llvm-svn: 324184
Clang already stopped using these a couple months ago.
The test cases aren't great as there is nothing forcing the operations to stay in k-registers so some of them moved back to scalar ops due to the bitcasts being moved around.
llvm-svn: 324177
This is running pre-legalize, we should try to use target independent nodes. This will give the best opportunity for target independent optimizations.
llvm-svn: 324147
Every instruction that has the word TEST in its name seems to have been buried into EmitTest. But that code is largely concerned with trying to reuse the flags from instructions that update flags in a pretty normal way.
PTEST/TESTP/KTEST do not update flags in a normal way. They only update Z and C and the C flag update is non-standard. Rather than try to bend EmitTest's already complex logic to accomodate this, just move the call up to LowerSETCC and replicate the few pre-checks that are needed.
While there add a FIXME for using the C flag for checking for all 1s which we definitely couldn't do from EmitTEST.
llvm-svn: 324029
This allows us to use PSHUFB for v8i16/v4i32 and VPERMD/PERMPS for v4i64/v4f64 variable shuffles.
Differential Revision: https://reviews.llvm.org/D42487
llvm-svn: 323987
Summary: Now that v2i1/v4i1 are legal without VLX. And v32i1 is legalized by splitting rather than widening. And isVectorLoadExtDesirable returns false for vXi1. It appears this handling is dead because the operations simply don't exist.
Reviewers: RKSimon, zvi, guyblank, delena, spatel
Reviewed By: delena
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D42781
llvm-svn: 323983
Summary:
EmitTest sometimes creates X86ISD::AND specifically to hide the AND from DAG combine. But this prevents isel patterns that look for (cmp (and X, Y), 0) from being able to see it. So we end up with an AND and a TEST. The TEST gets removed by compare instruction optimization during the peephole pass.
This patch attempts to fix this by converting X86ISD::AND with no flag users back into ISD::AND during the DAG preprocessing just before isel.
In order to do this correctly I had to make the X86ISD::AND node created by EmitTest in this case really have a flag output. Which arguably it should have had anyway so that the number of operands would be consistent for the opcode in all cases. Then I had to modify the ReplaceAllUsesWith to understand that we might be looking at an instruction with 2 outputs. Though in this case there are no uses to replace since we just created the node, but that's what the code did before so I just made it keep working.
Reviewers: spatel, RKSimon, niravd, deadalnix
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42764
llvm-svn: 323982
Summary:
This change expands the amount of registers stashed by the entry and
`__xray_CustomEvent` trampolines.
We've found that since the `__xray_CustomEvent` trampoline calls can show up in
situations where the scratch registers are being used, and since we don't
typically want to affect the code-gen around the disabled
`__xray_customevent(...)` intrinsic calls, that we need to save and restore the
state of even the scratch registers in the handling of these custom events.
Reviewers: pcc, pelikan, dblaikie, eizan, kpw, echristo, chandlerc
Reviewed By: echristo
Subscribers: chandlerc, echristo, hiraditya, davide, dblaikie, llvm-commits
Differential Revision: https://reviews.llvm.org/D40894
llvm-svn: 323940
This code currently uses isSimple and getSizeInBits in an attempt to prune types. But isSimple will return true for any type that any target supports natively. I don't think that's a good way to prune types. I also don't think the dest element type checks are very robust since we didn't do an isSimple check on the dest type.
This patch adds a check for the input type being legal to the one caller that didn't already check that. Then we explicitly check the element types for the destination are i8, i16, or i32
Differential Revision: https://reviews.llvm.org/D42706
llvm-svn: 323924
Similar to D42437, XOP supports variable shift for v16i8/v8i16/v4i32/v2i64 types.
Differential Revision: https://reviews.llvm.org/D42526
llvm-svn: 323797
We can use the same input for both operands to get a free compare with zero.
We already use this trick in a couple places where we explicitly create PTESTM with the same input twice. This generalizes it.
I'm hoping to remove the ISD opcodes and move this to isel patterns like we do for scalar cmp/test.
llvm-svn: 323605
Legalization is still biased to turn LT compares in to GT by swapping operands to avoid needing extra isel patterns to commute.
I'm hoping to remove TESTM/TESTNM next and this should simplify that by making EQ/NE more similar.
llvm-svn: 323604
If broadcasting from another shuffle, attempt to simplify it.
We can probably generalize this a lot more (embedding in combineX86ShufflesRecursively), but BROADCAST is one of the more troublesome as it accepts inputs of different sizes to the result.
llvm-svn: 323602
X86ISelLowering.cpp:34130:5: error: return type 'llvm::SDValue' must
match previous return type 'const llvm::SDValue' when lambda expression
has unspecified explicit return type
llvm-svn: 323557
We currently coalesce v4i32 extracts from all 4 elements to 2 v2i64 extracts + shifts/sign-extends.
This seems to have been added back in the days when we tended to spill vectors and reload scalars, or ended up with repeated shuffles moving everything down to 0'th index. I don't think either of these are likely these days as we have better EXTRACT_VECTOR_ELT and VECTOR_SHUFFLE handling, and the existing code tends to make it very difficult for various vector and load combines.
Differential Revision: https://reviews.llvm.org/D42308
llvm-svn: 323541
Type legalization would prevent any i64 operands to the build_vector from existing before we get here. The coverage bots show this code as uncovered.
llvm-svn: 323506
The original autoupgrade for kunpck intrinsics used a bitcasted scalar shift, or, and. This combine would turn this into a concat_vectors. Now the kunpck intrinsics are autoupgraded to a vector shuffle that will become a concat_vectors.
llvm-svn: 323504
This listed all legal 128-bit integer types individually, but since we already know we have a legal type and its integer, we can just check is128BitVector.
llvm-svn: 323502
As discussed in D41484, PMADDWD for 'zero extended' vXi32 is nearly always a better option than PMULLD:
On SNB it will result in code that isn't any faster, but not any slower so we may as well keep it.
On KNL it only has half the throughput, so I've disabled it on there - ideally there'd be a better way than this.
Differential Revision: https://reviews.llvm.org/D42258
llvm-svn: 323367
There are a couple tricky things with this patch.
I had to add an override of isVectorLoadExtDesirable to stop DAG combine from combining sign_extend with loads after legalization since we legalize sextload using a load+sign_extend. Overriding this hook actually prevents a lot sextloads from being created in the first place.
I also had to add isel patterns because DAG combine blindly combines sign_extend+truncate to a smaller sign_extend which defeats what legalization was trying to do.
Differential Revision: https://reviews.llvm.org/D42407
llvm-svn: 323301
Minor refactor to make it possible for LowerBUILD_VECTORAsVariablePermute to be used with a wider variety of shuffles op and types.
I'd have liked to add v4i32/v4f32 support as well but we don't see v4i32 index extractions at the moment (which is why I created D42308)
After this I intend to begin adding scaling support for PSHUFB (v8i16, v4i32, v2i64)) and VPERMPS (v4f64, v4i64).
Differential Revision: https://reviews.llvm.org/D42431
llvm-svn: 323260
The existing code was already doing something very similar to subvector insertion so this allows us to remove the nearly duplicate code.
This patch is a little larger than it should be due to differences between the DQI handling between the two today.
llvm-svn: 323212
Summary:
For the most part its better to keep v32i1 as a mask type of a narrower width than trying to promote it to a ymm register.
I had to add some overrides to the methods that get the types for the calling convention so that we still use v32i8 for argument/return purposes.
There are still some regressions in here. I definitely saw some around shuffles. I think we probably should move vXi1 shuffle from lowering to a DAG combine where I think the extend and truncate we have to emit would be better combined.
I think we also need a DAG combine to remove trunc from (extract_vector_elt (trunc))
Overall this removes something like 13000 CHECK lines from lit tests.
Reviewers: zvi, RKSimon, delena, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42031
llvm-svn: 323201
As detailed in rL317463, PSHUFB (like most variable shuffle instructions) uses Op[0] for the source vector and Op[1] for the shuffle index vector, VPERMV works in reverse which is probably where the confusion comes from.
Differential Revision: https://reviews.llvm.org/D42380
llvm-svn: 323190
Summary:
If we can match as a zero extend there's no need to flip the order to get an encoding benefit. As movzx is 3 bytes with independent source/dest registers. The shortest 'and' we could make is also 3 bytes unless we get lucky in the register allocator and its on AL/AX/EAX which have a 2 byte encoding.
This patch was more impressive before r322957 went in. It removed some of the same Ands that got deleted by that patch.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42313
llvm-svn: 323175
Add missing patterns for inserting v1i1 into a zero vector. Use insert_subvector to zero upper bits before inserting an element into a vXi1 vector. Replace kshift based isel pattern with insert_subvector based pattern now that code that caused the pattern has been fixed to emit insert_subvector.
llvm-svn: 323173
Summary:
First, we need to explain the core of the vulnerability. Note that this
is a very incomplete description, please see the Project Zero blog post
for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative execution
of the processor to some "gadget" of executable code by poisoning the
prediction of indirect branches with the address of that gadget. The
gadget in turn contains an operation that provides a side channel for
reading data. Most commonly, this will look like a load of secret data
followed by a branch on the loaded value and then a load of some
predictable cache line. The attacker then uses timing of the processors
cache to determine which direction the branch took *in the speculative
execution*, and in turn what one bit of the loaded value was. Due to the
nature of these timing side channels and the branch predictor on Intel
processors, this allows an attacker to leak data only accessible to
a privileged domain (like the kernel) back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In many
cases, the compiler can simply use directed conditional branches and
a small search tree. LLVM already has support for lowering switches in
this way and the first step of this patch is to disable jump-table
lowering of switches and introduce a pass to rewrite explicit indirectbr
sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as
a trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures the
processor predicts the return to go to a controlled, known location. The
retpoline then "smashes" the return address pushed onto the stack by the
call with the desired target of the original indirect call. The result
is a predicted return to the next instruction after a call (which can be
used to trap speculative execution within an infinite loop) and an
actual indirect branch to an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this device.
For 32-bit ABIs there isn't a guaranteed scratch register and so several
different retpoline variants are introduced to use a scratch register if
one is available in the calling convention and to otherwise use direct
stack push/pop sequences to pass the target address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the retpoline
thunk by the compiler to allow for custom thunks if users want them.
These are particularly useful in environments like kernels that
routinely do hot-patching on boot and want to hot-patch their thunk to
different code sequences. They can write this custom thunk and use
`-mretpoline-external-thunk` *in addition* to `-mretpoline`. In this
case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are from
precompiled runtimes (such as crt0.o and similar). The ones we have
found are not really attackable, and so we have not focused on them
here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z retpolineplt`
(or use similar functionality from some other linker). We strongly
recommend also using `-z now` as non-lazy binding allows the
retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typical workloads, and relatively minor hits (approximately 2%)
even for extremely syscall-heavy applications. This is largely due to
the small number of indirect branches that occur in performance
sensitive paths of the kernel.
When using these patches on statically linked applications, especially
C++ applications, you should expect to see a much more dramatic
performance hit. For microbenchmarks that are switch, indirect-, or
virtual-call heavy we have seen overheads ranging from 10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically reduce
the impact of hot indirect calls (by speculatively promoting them to
direct calls) and allow optimized search trees to be used to lower
switches. If you need to deploy these techniques in C++ applications, we
*strongly* recommend that you ensure all hot call targets are statically
linked (avoiding PLT indirection) and use both PGO and ThinLTO. Well
tuned servers using all of these techniques saw 5% - 10% overhead from
the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality available
as soon as possible. Happy for more code review, but we'd really like to
get these patches landed and backported ASAP for obvious reasons. We're
planning to backport this to both 6.0 and 5.0 release streams and get
a 5.0 release with just this cherry picked ASAP for distros and vendors.
This patch is the work of a number of people over the past month: Eric, Reid,
Rui, and myself. I'm mailing it out as a single commit due to the time
sensitive nature of landing this and the need to backport it. Huge thanks to
everyone who helped out here, and everyone at Intel who helped out in
discussions about how to craft this. Also, credit goes to Paul Turner (at
Google, but not an LLVM contributor) for much of the underlying retpoline
design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
llvm-svn: 323155
Primarily, this allows us to use the aggressive extraction mechanisms in combineExtractWithShuffle earlier and make use of UNDEF elements that may be lost during lowering.
Reapplied after rL322279 was reverted at rL322335 due to PR35918, underlying issue was fixed at rL322644.
llvm-svn: 323104
1. ReachingDefsAnalysis - Allows to identify for each instruction what is the “closest” reaching def of a certain register. Used by BreakFalseDeps (for clearance calculation) and ExecutionDomainFix (for arbitrating conflicting domains).
2. ExecutionDomainFix - Changes the variant of the instructions in order to minimize domain crossings.
3. BreakFalseDeps - Breaks false dependencies.
4. LoopTraversal - Creatws a traversal order of the basic blocks that is optimal for loops (introduced in revision L293571). Both ExecutionDomainFix and ReachingDefsAnalysis use this to determine the order they will traverse the basic blocks.
This also included the following changes to ExcecutionDepsFix original logic:
1. BreakFalseDeps and ReachingDefsAnalysis logic no longer restricted by a register class.
2. ReachingDefsAnalysis tracks liveness of reg units instead of reg indices into a given reg class.
Additional changes in affected files:
1. X86 and ARM targets now inherit from ExecutionDomainFix instead of ExecutionDepsFix. BreakFalseDeps also was added to the passes they activate.
2. Comments and references to ExecutionDepsFix replaced with ExecutionDomainFix and BreakFalseDeps, as appropriate.
Additional refactoring changes will follow.
This commit is (almost) NFC.
The only functional change is that now BreakFalseDeps will break dependency for all register classes.
Since no additional instructions were added to the list of instructions that have false dependencies, there is no actual change yet.
In a future commit several instructions (and tests) will be added.
This is the first of multiple patches that fix bugzilla https://bugs.llvm.org/show_bug.cgi?id=33869
Most of the patches are intended at refactoring the existent code.
Additional relevant reviews:
https://reviews.llvm.org/D40331https://reviews.llvm.org/D40332https://reviews.llvm.org/D40333https://reviews.llvm.org/D40334
Differential Revision: https://reviews.llvm.org/D40330
Change-Id: Icaeb75e014eff96a8f721377783f9a3e6c679275
llvm-svn: 323087
Summary:
This patch adds an implementation of targetShrinkDemandedConstant that tries to keep shrinkdemandedbits from removing bits that would otherwise have been recognized as a movzx.
We still need a follow patch to stop moving ands across srl if the and could be represented as a movzx before the shift but not after. I think this should help with some of the cases that D42088 ended up removing during isel.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42265
llvm-svn: 323048
This change applies to places where we would turn 128/256-bit code into 512-bit in order to get a wider element type through sext/zext. Any 512-bit types that already existed in the IR/DAG will be left that way.
The width preference has no effect on codegen behavior when the target does not have AVX512 enabled. So AVX/AVX2 codegen cannot be limited via this mechanism yet.
If the preference is lower than 256 we may still use a 256 bit type to do the operation. Constraining to 128 bits makes it much more difficult to support some operations. For many of these cases we need to change element width while keeping element count constant which is easiest done by switching between 256 and 128 bit.
The preference is only obeyed when AVX512 and VLX are available. This means the preference is not obeyed for KNL, but is obeyed for SKX, Cannonlake, and Icelake. For KNL, the only way to do masked operation is on 512-bit registers so we would have to completely disable masking to obey the preference. We would also lose support for gather, scatter, ctlz, vXi64 multiplies, etc. This may change in the future, but this simplifies the initial implementation.
Differential Revision: https://reviews.llvm.org/D41895
llvm-svn: 323016
If we are splatting pairs of 32-bit elements, we can use a 64-bit broadcast to get the job done.
We could probably could probably do this with other sizes too, for example four 16-bit elements. Or we could broadcast pairs of 16-bit elements using a 32-bit element broadcast. But I've left that as a future improvement.
I've also restricted this to AVX2 only because we can only broadcast loads under AVX.
Differential Revision: https://reviews.llvm.org/D42086
llvm-svn: 322730
We legalize selects of masks with scalar conditions using a bitcast to an integer type. But if we are in 32-bit mode we can't convert v64i1 to i64. So instead split the v64i1 to v32i1 and concat it back together. Each half will then be legalized by bitcasting to i32 which is fine.
The test case is a little indirect. If we have the v64i1 select in IR it will get legalized by legalize vector ops which has a run of type legalization after it. That type legalization run is able to fix this i64 bitcast. So in order to avoid that we need a build_vector of a splat which legalize vector ops will ignore. Legalize DAG will then turn that into a select via LowerBUILD_VECTORvXi1. And the select will get legalized. In this case there is no type legalizer run to cleanup the bitcast.
This fixes pr35972.
llvm-svn: 322724
The match* functions have the annoying behavior of modifying its inputs.
Save and restore the inputs, just in case the early out for AVX512 is
hit. This is still not great and its only a matter of time this kind of
bug happens again, but I couldn't come up with a better pattern without
rewriting significant chunks of this code. Fixes PR35977.
llvm-svn: 322644
As mentioned on PR35869, (and came up recently on D41517) we don't create a MMX zero register via the PXOR but instead perform a spill to stack from a XMM zero register.
This patch adds support for direct MMX zero vector creation and should make it easier to add better constant vector creation in the future as well.
Differential Revision: https://reviews.llvm.org/D41908
llvm-svn: 322525
We have to take special care to avoid the cases where the result of the truncate would be padded with zero elements.
Ideally we'd just use ISD::TRUNCATE for these cases instead.
llvm-svn: 322454
Extend vXi1 conditions of vXi8/vXi16 selects even before type legalization gets a chance to split wide vectors. Previously we would only extend 128 and 256 bit vectors. But if we start with a 512 bit vector or wider that needs to be split we wouldn't extend until after the split had taken place. By extending early we improve the results of type legalization.
Don't widen condition of 128/256 bit vXi16/vXi8 selects when we have BWI but not VLX. We can still use a mask register by widening the select to 512-bits instead. This is similar to what we do for compares already.
llvm-svn: 322450
In addition to the existing match as part of a loop-reduction, add a
straightforward pattern match for DAG-contained patterns.
Reviewers: RKSimon, craig.topper
Subscribers: llvm-commits
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D41811
llvm-svn: 322446
This avoids having the result type stick around until lowering where we have to extend the setcc and insert a truncate. If we get the types converted early we can do more to optimize it.
llvm-svn: 322432
Summary: This is a preparatory step for D41811: refactoring code for breaking vector operands of binary operation to legal-types.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41925
llvm-svn: 322296
Primarily, this allows us to use the aggressive extraction mechanisms in combineExtractWithShuffle earlier and make use of UNDEF elements that may be lost during lowering.
llvm-svn: 322279
Summary:
As RKSimon suggested in pr35820, in the case that Src is smaller in
bit-size than Indices, need to widen Src to avoid type mismatch.
Fixes pr35820
Reviewers: RKSimon, craig.topper
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41865
llvm-svn: 322272
If the index is v2i64 we can use the scatter instruction that has v4i32/v4f32 data register, v2i64 index, and v2i1 mask. Similar was already done for gather.
Implement custom widening for v2i32 data to remove the code that reverses type legalization during lowering.
llvm-svn: 322254
Currently we infer the scale at isel time by analyzing whether the base is a constant 0 or not. If it is we assume scale is 1, else we take it from the element size of the pass thru or stored value. This seems a little weird and I think it makes more sense to make it explicit in the DAG rather than doing tricky things in the backend.
Most of this patch is just making sure we copy the scale around everywhere.
Differential Revision: https://reviews.llvm.org/D40055
llvm-svn: 322210
Normally target independent DAG combine would do this combine based on getSetCCResultType, but with VLX getSetCCResultType returns a vXi1 type preventing the DAG combining from kicking in.
But doing this combine can allow us to remove the explicit sign extend that would otherwise be emitted.
This patch adds a target specific DAG combine to combine the sext+setcc when the result type is the same size as the input to the setcc. I've restricted this to FP compares and things that can be represented with PCMPEQ and PCMPGT since we don't have full integer compare support on the older ISAs.
Differential Revision: https://reviews.llvm.org/D41850
llvm-svn: 322101
I had to drop fast-isel-abort from a test because we can't fast isel some of the mask stuff. When we used intrinsics we implicitly fell back to SelectionDAG for the intrinsic call without triggering the abort error. But with native IR that doesn't happen the same way.
llvm-svn: 322050
Summary:
There are few oddities that occur due to v1i1, v8i1, v16i1 being legal without v2i1 and v4i1 being legal when we don't have VLX. Particularly during legalization of v2i32/v4i32/v2i64/v4i64 masked gather/scatter/load/store. We end up promoting the mask argument to these during type legalization and then have to widen the promoted type to v8iX/v16iX and truncate it to get the element size back down to v8i1/v16i1 to use a 512-bit operation. Since need to fill the upper bits of the mask we have to fill with 0s at the promoted type.
It would be better if we could just have the v2i1/v4i1 types as legal so they don't undergo any promotion. Then we can just widen with 0s directly in a k register. There are no real v4i1/v2i1 instructions anyway. Everything is done on a larger register anyway.
This also fixes an issue that we couldn't implement a masked vextractf32x4 from zmm to xmm properly.
We now have to support widening more compares to 512-bit to get a mask result out so new tablegen patterns got added.
I had to hack the legalizer for widening the operand of a setcc a bit so it didn't try create a setcc returning v4i32, extract from it, then try to promote it using a sign extend to v2i1. Now we create the setcc with v4i1 if the original setcc's result type is v2i1. Then extract that and don't sign extend it at all.
There's definitely room for improvement with some follow up patches.
Reviewers: RKSimon, zvi, guyblank
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41560
llvm-svn: 321967
This custom inserter was added in r124272 at which time it added about bunch of Defs for Win64. In r150708, those defs were removed leaving only the "return BB". So I think this means the custom inserter is a NOP these days.
This patch removes the remaining code and stops tagging the instructions for custom insertion
Differential Revision: https://reviews.llvm.org/D41671
llvm-svn: 321747
Currently we use SIGN_EXTEND in lowerMasksToReg as part of calling convention setup, but we don't require a specific value for the upper bits.
This patch changes it to ANY_EXTEND which will be lowered as SIGN_EXTEND if it ends up sticking around.
llvm-svn: 321746
This is an extension of D31156 with the goal that we'll allow memcmp() == 0 expansion
for x86 to use 2 pairs of loads per block.
The memcmp expansion pass (formerly part of CGP) will generate this kind of pattern
with oversized integer compares, so we want to transform these into x86-specific vector
nodes before legalization splits things into scalar chunks.
See PR33325 for more details:
https://bugs.llvm.org/show_bug.cgi?id=33325
Differential Revision: https://reviews.llvm.org/D41618
llvm-svn: 321656
Currently the promotion for these ignores the normal getTypeToPromoteTo and instead just tries to double the element width. This is because the default behavior of getTypeToPromote to just adds 1 to the SimpleVT, which has the affect of increasing the element count while keeping the scalar size the same.
If multiple steps are required to get to a legal operation type, int_to_fp will be promoted multiple times. And fp_to_int will keep trying wider types in a loop until it finds one that works.
getTypeToPromoteTo does have the ability to query a promotion map to get the type and not do the increasing behavior. It seems better to just let the target specify the promotion type in the map explicitly instead of letting the legalizer iterate via widening.
FWIW, it's worth I think for any other vector operations that need to be promoted, we have to specify the type explicitly because the default behavior of getTypeToPromote isn't useful for vectors. The other types of promotion already require either the element count is constant or the total vector width is constant, but neither happens by incrementing the SimpleVT enum.
Differential Revision: https://reviews.llvm.org/D40664
llvm-svn: 321629
The CONCAT_VECTORS will be lowered to INSERT_SUBVECTOR later. In the modified cases this seems to be enough to trick a later DAG combine into running in a different order than allows the ANDs to be removed.
I'll admit this is a bit of a hack that happens to work, but using CONCAT_VECTORS is more consistent with other legalization code anyway.
llvm-svn: 321611
Don't combine buildvector(binop(),binop(),binop(),binop()) -> binop(buildvector(), buildvector()) if its a splat - keep the binop scalar and just splat the result to avoid large vector constants.
llvm-svn: 321607
We end up using an i8 load via an isel pattern from v8i1 anyway. This just makes it more explicit. This seems to improve codgen in some cases and I'd like to kill off some of the load patterns.
llvm-svn: 321598
As noted in PR34686, we are relying on a PSHUFD+PSHUFLW+PSHUFHW shuffle chain for most general vXi16 unary shuffles.
This patch checks for simpler PSHUFLW+PSHUFD and PSHUFHW+PSHUFD cases beforehand, building on some existing code that just handled splat shuffles.
By doing so we also prevent premature use of PSHUFB shuffles which can be slower and require the creation/loading of constant shuffle masks.
We now have the 'fast-variable-shuffle' option for hardware that prefers combining 2 or more shuffles to VPSHUFB etc.
Differential Revision: https://reviews.llvm.org/D38318
llvm-svn: 321553
Previously we used an extend from v8i1 to v8i32/v8i64. Then extracted to the final width. But if we have VLX we should extract first. This way we don't end up with an overly large extend.
This allows us to use vcmpeq to make all ones for the sign extend when DQI isn't available. Otherwise we get a VPTERNLOG.
If we make v2i1/v4i1 legal like proposed in D41560, we could always do this and rely on the lowering of the extend to widen when necessary.
llvm-svn: 321538
-Use MinAlign instead of std::min.
-Use SelectionDAG::getMemBasePlusOffset.
-Apply offset to the pointer info for the second load/store created.
llvm-svn: 321536
If there are 17 or more leading zeros to the v4i32 elements, then we can use PMADD for the integer multiply when PMULLD is unavailable or slow.
The 17 bits need to be zero as the PMADDWD performs a v8i16 signed-mul-extend + pairwise-add - the upper 16 so we're adding a zero pair and the 17th bit so we don't incorrectly sign extend.
Differential Revision: https://reviews.llvm.org/D41484
llvm-svn: 321516
My original implementation ran as a DAG combine post type legalization, but it turns out we don't run that DAG combine step if type legalization didn't change anything. Attempts to make the combine run before type legalization as well hit other issues.
So just do it in LowerMUL where we can catch more cases.
llvm-svn: 321496
Returning SDValue() means nothing changed, SDValue(N,0) means there was a change but the worklist management was taken care of.
I don't know if this has a real effect other than making sure the combine counter in the DAG combiner gets updated, but it is the correct thing to do.
llvm-svn: 321463
Normally we catch this during lowering, but vXi64 mul is considered legal when we have AVX512DQ.
This DAG combine allows us to avoid PMULLQ with AVX512DQ if we can prove its unnecessary. PMULLQ is 3 uops that take 4 cycles each. While pmuldq/pmuludq is only one 4 cycle uop.
llvm-svn: 321437
Previously we extended v2i1 to v2f64 and then tried to use cvtuqq2pd/cvtqq2pd, but that only works with avx512dq. So we ended up scalarizing it. Now we widen to v4i1 first and extend to v4i32.
llvm-svn: 321420
Immediately after it is created we check if its equal to another EVT. Then we inconsistently use one or the other variables in the code below.
Instead do the equality check directly on the getValueType result and remove the variable. Use the origina VT variable throughout the remaining code.
llvm-svn: 321406
getOperand returns an SDValue that contains the node and the result number. There is no guarantee that the result number if 0. By using the -> operator we are calling SDNode::getValueType rather than SDValue::getValueType. This requires supplying a result number and we shouldn't assume it was 0.
I don't have a test case. Just noticed while cleaning up some other code and saw that it occurred in other places.
llvm-svn: 321397
Despite what the comment said there isn't better codegen for 512-bit vectors. The 128/256/512 bit implementation jus stores to memory and loads an element. There's no advantage to doing that with a larger size. In fact in many cases it causes a stack realignment and generates worse code.
llvm-svn: 321369
Previously prefetch was only considered legal if sse was enabled, but it should be supported with 3dnow as well.
The prfchw flag now imply at least some form of prefetch without the write hint is available, either the sse or 3dnow version. This is true even if 3dnow and sse are explicitly disabled.
Similarly prefetchwt1 feature implies availability of prefetchw and the the prefetcht0/1/2/nta instructions. This way we can support _MM_HINT_ET0 using prefetchw and _MM_HINT_ET1 with prefetchwt1. And its assumed that if we have levels for the write hint we would have levels for the non-write hint, thus why we enable the sse prefetch instructions.
I believe this behavior is consistent with gcc. I've updated the prefetch.ll to test all of these combinations.
llvm-svn: 321335
This should only affect what we do for v8i16. Previously we went to v8i64, but if we have VLX we only need v8i32. This prevents an unnecessary zmm usage.
llvm-svn: 321303
We should have equally good shuffle options for v8i32 with VLX. This was spotted during my attempts to remove 512-bit vectors from SKX.
We still use 512-bits for v16i1, v32i1, and v64i1. I'm less sure we can handle those well with narrower vectors. i32 and i64 element sizes get the best shuffle support.
llvm-svn: 321291
Gather/scatter can implicitly sign extend from i32->i64 on indices. So if we know the sign bit of the input to a zext is 0 we can use the implicit extension.
llvm-svn: 321209
This patch turns shuffles of fadd/fsub with fmul into fmsubadd.
Patch by Dmitry Venikov
Differential Revision: https://reviews.llvm.org/D40335
llvm-svn: 321200
The gather instruction will implicitly sign extend to the pointer width, we don't need to further extend it. This can prevent unnecessary splitting in some cases.
There's still an issue that lowering on non-VLX can introduce another sign extend that doesn't get combined with shifts from a lowered sign_extend_inreg.
llvm-svn: 321152
Not sure how to test this cause I think the worst that happens is that we don't revisit the node a second time to look for additional combines. We used UpdateNodeOperands so the updating the DAG work was already done.
llvm-svn: 321148
We try to prevent shuffle combining to value types that would stop the folding of masked operations, but by just returning early, we were failing to try different shuffle types.
The TODOs are all still relevant here to improve codegen but we're lacking test examples.
llvm-svn: 321085
As mentioned in D38318 and D40865, modern Intel processors prefer to combine multiple shuffles to a variable shuffle mask (PSHUFB/VPERMPS etc.) instead of having multiple stage 'fixed' shuffles which put more pressure on Port 5 (at the expense of extra shuffle mask loads).
This patch provides a FeatureFastVariableShuffle target flag for Haswell+ CPUs that prefers combining 2 or more fixed shuffles to a single variable shuffle (default is 3 shuffles).
The long term aim is to drive more of this from schedule data (probably via the MC) but we're not close to being ready for that yet.
Differential Revision: https://reviews.llvm.org/D41323
llvm-svn: 321074
Extension to D39729 which performed this for vXi16, with the same bit flipping to handle SMAX/SMIN/UMAX cases, vXi8 UMIN horizontal reductions can be performed.
This makes use of the fact that by performing a pair-wise i8 SHUFFLE/UMIN before PHMINPOSUW, we both get the UMIN of each pair but also zero-extend the upper bits ready for v8i16.
Differential Revision: https://reviews.llvm.org/D41294
llvm-svn: 321070
BWI supports shifting by word amounts. Even if VLX isn't support we can still widen to v32i16 and extract the lower half. For SKX its preferrable to not use 512-bit vector if we can.
llvm-svn: 321059
Previously, we were checking for MVTs with sizes betwen 8 and 64 which only includes i8, i16, i32, and i64 today. But I don't think we should assume that and should list the types that are legal for x86. I also don't think we need i64 since type legalization is guaranteed to split those up.
llvm-svn: 321058
My reading of the SDM says that all bits of the shift amount are used. If the value of the element is larger than the number of bits the result the shift result is zero. So I think we need to zero_extend here to avoid garbage in the upper bits.
In reality we lower any_extend as zero_extend so in most cases it would be hard to hit this.
llvm-svn: 321055
Note:
- X86ISelLowering: setLibcallName(SINCOS) was superfluous as
InitLibcalls() already does it.
- ARMISelLowering: Setting libcallnames for sincos/sincosf seemed
superfluous as in the darwin case it wouldn't be used while for all
other cases InitLibcalls already does it.
llvm-svn: 321036
The block I moved things that need BWI and 512-bit or VLX is incorrectly qualified with just hasBWI || hasVLX. Here I've qualified it with hasBWI && (hasAVX512 || hasVLX) where the hasAVX512 will be replaced with allowing 512-bit vectors in an upcoming patch.
llvm-svn: 320957
Summary:
We had no tests for this and we couldn't do the optimization because of a bad use count check. We need to know how many non-undef pieces of the build vector were filled in and ensure our use count is equal to that. But on the shuffle combine version we need the use count to be 2.
The missing coverage was noticed during the review of D40335.
Reviewers: RKSimon, zvi, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41133
llvm-svn: 320950
Assuming we can safely adjust the broadcast index for the new type to keep it suitably aligned, then peek through BITCASTs when looking for the broadcast source.
Fixes PR32007
llvm-svn: 320933
In those cases, the pass thru operand of the methods isn't used. The calls to the scalar version were passing a MVT::i1 zero, which is an illegal type at the stage this code runs.
llvm-svn: 320928
Previously we promoted to v8i64, but we don't need to go all the way to 512-bits. If we have VLX we can use the 256-bit instruction. And even if we don't have VLX we can widen v8i32 to v16i32 and drop the upper half.
llvm-svn: 320926
The target independent nodes will get legalized to the target specific nodes by their own legalization process. Someday I'd like to stop using a target specific for zero extends and truncates of legal types so the less places we reference the target specific opcode the better.
llvm-svn: 320863
When I wrote it I thought we were missing a potential optimization for KNL. But investigating further shows that for KNL we still do the optimal thing by widening to v4f32 and then using special isel patterns to widen again to zmm a register.
llvm-svn: 320862
Summary:
Currently we don't handle v32i1/v64i1 insert_vector_elt correctly as we fail to look at the number of elements closely and assume it can only be v16i1 or v8i1.
We also can't type legalize v64i1 insert_vector_elt correctly on KNL due to the type not being byte addressable as required by the legalizing through memory accesses path requires.
For the first issue, the patch now tries to pick a 512-bit register with the correct number of elements and promotes to that.
For the second issue, we now extend the vector to a byte addressable type, do the stores to memory, load the two halves, and then truncate the halves back to the original type. Technically since we changed the type, we may not need two loads, but actually checking that is more work and for the v64i1 case we do need them.
Reviewers: RKSimon, delena, spatel, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40942
llvm-svn: 320849
A couple places didn't use the same SDValue variables to connect everything all the way through.
I don't have a test case for a bug in insert into the lower bits of a non-zero, non-undef vector. Not sure the best way to create that. We don't create the case when lowering concat_vectors which is the main way to get insert_subvectors.
llvm-svn: 320790
We have several instructions that were introduced in AVX512F that are only available in 512-bit form on KNL. We still make use of them for 128/256 by artificially widening and extracting during isel.
This commit separates these operations from the true 512-bit operations. This way we can qualify the normal 512-bit operations with needing 512-bit register support. And these special operations will get qualified with needing 512-bit registers OR VLX.
The 512-bit register qualification will be introduced in a future patch this just gets everything grouped to minimize deltas on that patch.
llvm-svn: 320782
Previously they were sort of interleaved in with XMM/YMM/ZMM action related code.
Trying to separate things so its easier to split 512-bit vectors later.
llvm-svn: 320781
Move it into the separate hasVLX block later in the constructor.
I'm trying to separate 128/256 and 512-bit related code so we can eventually qualify the hasAVX512 block with support for 512-bit vectors required by the prefer-vector-width feature support being talked about in D41096.
llvm-svn: 320779
Most of the -Wsign-compare warnings are due to the fact that
enums are signed by default in the MS ABI, while the
tautological comparison warnings trigger on x86 builds where
sizeof(size_t) is 4 bytes, so N > numeric_limits<unsigned>::max()
is always false.
Differential Revision: https://reviews.llvm.org/D41256
llvm-svn: 320750
Rather than adding more bits to express every
MMO flag you could want, just directly use the
MMO flags. Also fixes using a bunch of bool arguments to
getMemIntrinsicNode.
On AMDGPU, buffer and image intrinsics should always
have MODereferencable set, but currently there is no
way to do that directly during the initial intrinsic
lowering.
llvm-svn: 320746
This doesn't match the semantics of the extract_vector_elt operation. Nothing downstream knows the bits were zeroed so they still get masked or sign extended after the extrat anyway.
llvm-svn: 320723
store operation on a truncated memory (load) of vXi1 is poorly supported by LLVM and most of the time end with an assertion.
This patch fixes this issue.
Differential Revision: https://reviews.llvm.org/D39547
Change-Id: Ida5523dd09c1ad384acc0a27e9e59273d28cbdc9
llvm-svn: 320691
Pass the input vector through SimplifyDemandedBits as we only need the sign bit from each vector element of MOVMSK
We'd probably get more hits if SimplifyDemandedBits was better at handling vectors...
Differential Revision: https://reviews.llvm.org/D41119
llvm-svn: 320570
D40335 was wanting to add FMSUBADD support, but it discovered that there are two pieces of code to make FMADDSUB and only one of those is tested. So I've asked that review to implement the one path until we get tests that test the existing code.
llvm-svn: 320507
Summary:
Simplify and generalize chain handling and search for 64-bit load-store pairs.
Nontemporal test now converts 64-bit integer load-store into f64 which it realizes directly instead of splitting into two i32 pairs.
Reviewers: craig.topper, spatel
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40918
llvm-svn: 320505
Recognize constant arrays with the following values:
0x0, 0x1, 0x3, 0x7, 0xF, 0x1F, .... , 2^(size - 1) -1
where //size// is the size of the array.
the result of a load with index //idx// from this array is equivalent to the result of the following:
(0xFFFFFFFF >> (sub 32, idx)) (assuming the array of type 32-bit integer).
And the result of an 'AND' operation on the returned value of such a load and another input, is exactly equivalent to the X86 BZHI instruction behavior.
See test cases in the LIT test for better understanding.
Differential Revision: https://reviews.llvm.org/D34141
llvm-svn: 320481
We may need to widen the vector to make the shifts legal, but if we do that we need to make sure we shift left/right after accounting for the new size. If not we can't guarantee we are shifting in zeros.
The test cases affected actually show cases where we should move the shifts all together, but that's another problem.
llvm-svn: 320248
We were previously using kunpck with zero inputs unnecessarily. And we had cases where we would insert into a zero vector and then insert into larger zero vector incurring two sets of shifts.
llvm-svn: 320244
For narrow sizes we'll widen the zero vector and widen the insert. Then do an extract_subvector to get back down to correct size.
This allows us to remove some patterns from the isel table that had to COPY_TO_REGCLASS to an oversized register, do the shift and then COPY_TO_REGCLASS back to the narrow register. Now this is represented explicitly in the DAG.
This seems to have perturbed the register allocation in one of the tests, but the number of instructions didn't change.
llvm-svn: 320190
These are aliases, but the thing we're checking here is that the target has
vpsllv*, not that the data type is 256-bit. Those instructions exist for
128-bit vectors too...but sadly, not for all element sizes.
llvm-svn: 320170
Previously we only allowed these through if the subvector came from a compare or test instruction which we would again check for during isel.
With this change we only check for the compare and test instructions during isel and have fallback patterns that emit the shifts if needed.
I noticed that in a lot of cases we don't actually see the compare during lowering and rely on an odd legalization of concat_vectors with a zero vector as the second argument. This keeps the concat_vectors around long enough for a later dag combine to expose the compare then we re-legalize the concat_vectors and catch the compare.
llvm-svn: 320134
We previously only supported inserting to the LSB or MSB where it was easy to zero to perform an OR to insert.
This change effectively extracts the old value and the new value, xors them together and then xors that single bit with the correct location in the original vector. This will cancel out the old value in the first xor leaving the new value in the position.
The way I've implemented this uses 3 shifts and two xors and uses an additional register. We can avoid the additional register at the cost of another shift.
llvm-svn: 320120
There's no v2i1 or v4i1 kshift, and v8i1 is only supported with AVXDQ. Isel has fake patterns to extend these types to native shifts, but makes no guarantees about the value of any bits shifted in when shifting right.
This patch promotes the vector to a type that supports a native shift first and only allows inserting into the msb of a native sized shift.
I've constructed this in a way that doesn't do the promotion if we're going to fallback to using a xmm/ymm/zmm shuffle. I think I have a plan to remove the shuffle fall back entirely. In which case we this can be simplified, but I wanted to fix the correctness issue first.
llvm-svn: 320081
Most of the code in these routines is for handling extends from vXi1 types. The 512-bit handling for other extends is very much like the AVX2 code. So make the special routines just do vXi1 types and move the other 512-bit handling to the place that handles AVX2.
llvm-svn: 319878
The patch originally broke Chromium (crbug.com/791714) due to its failing to
specify that the new pseudo instructions clobber EFLAGS. This commit fixes
that.
> Summary: This strengthens the guard and matches MSVC.
>
> Reviewers: hans, etienneb
>
> Subscribers: hiraditya, JDevlieghere, vlad.tsyrklevich, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D40622
llvm-svn: 319824
This patch, together with a matching clang patch (https://reviews.llvm.org/D39719), implements the lowering of X86 kunpack intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D39720
Change-Id: I4088d9428478f9457f6afddc90bd3d66b3daf0a1
llvm-svn: 319778
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319740
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319728
The getConstant function can take care of creating the APInt internally.
getZeroVector will take care of using the correct type for the build vector to avoid re-lowering.
The test change here is because execution domain constraints apparently pass through undef inputs of a zeroing xor. So the different ordering of register allocation here caused the dependency to change.
llvm-svn: 319725
Move the AVX512 code out of LowerAVXExtend. LowerAVXExtend has two callers but one of them pre-checks for AVX-512 so the code is only live from the other caller. So move the AVX-512 checks up to that caller for symmetry.
Move all of the i1 input type code in Lower_AVX512ZeroExend together.
llvm-svn: 319724
These instructions can be used by widening to 512-bits and extracting back to 128/256. We do similar to several other instructions already.
llvm-svn: 319641
We already do this as a DAG combine. The version during lowering can only trigger if known bits changes something that improves known bits analysis. But this means we should be improving known bits analysis to work on the unlowered form instead.
llvm-svn: 319640
The default legalization for v2i32 is promotion to v2i64. This results in a gather that reads 64-bit elements rather than 32. If one of the elements is near a page boundary this can cause an illegal access that can fault.
We also miscalculate the scale for the gather which is an even worse problem, but we probably could have found a separate way to fix that.
llvm-svn: 319521
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
llvm-svn: 319427
Normal type legalization will widen everything. This requires forcing 0s into the mask register. We can instead choose the form that only reads 2 elements without zeroing the mask.
llvm-svn: 319406
Previously we had an isel pattern to add the truncate. Instead use Promote to add the truncate to the DAG before isel.
The Promote legalization code had to be updated to prevent an infinite loop if promotion took multiple steps because it wasn't remembering the previously tried value.
llvm-svn: 319259
These lines all exist identically either under SSE2, AVX2 or AVX512. Given that VLX implies all of those, these aren't providing anything new.
llvm-svn: 319124
Which VTs are considered simple is determined by the superset of the legal types of all targets in LLVM. If we're looking at VTs that are going to be split down to 512-bits we should allow any VT not just simple ones since the simple list changes over time as new targets are added.
llvm-svn: 319110
We don't do this for narrow vectors under AVX or SSE features. We also don't set them to Expand like we do for many vectors op. Nor does TargetLoweringBase.cpp. This leads me to believe these default to Legal.
llvm-svn: 319103
I don't have a good test case for this at the moment. I was playing around with a change in legalizing and triggered this code to produce a PSHUFD with sse1 only.
llvm-svn: 319066
Similar for vXi16/vXi8 with BWI.
Any vector larger than 512 bits will be split to 512 bits during legalization. But without this we will fold sexts with them before that making it difficult to recover leading to scalarization.
llvm-svn: 319059
Summary:
These instructions zero the non-scalar part of the lower 128-bits which makes them different than the FMA3 instructions which pass through the non-scalar part of the lower 128-bits.
I've only added fmadd because we should be able to derive all other variants using operand negation in the intrinsic header like we do for AVX512.
I think there are still some missed negate folding opportunities with the FMA4 instructions in light of this behavior difference that I hadn't noticed before.
I've split the tests so that we can use different intrinsics for scalar testing between the two. I just copied the tests split the RUN lines and changed out the scalar intrinsics.
fma4-fneg-combine.ll is a new test to make sure we negate the fma4 intrinsics correctly though there are a couple TODOs in it.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39851
llvm-svn: 318984
v4i32 isn't a legal type with sse1 only and would end up getting scalarized otherwise.
This isn't completely ideal as it doesn't handle cases like v8i32 that would get split to v4i32. But it at least helps with code written using the clang intrinsic header.
llvm-svn: 318967
This optimization can occur after type legalization and emit a vselect with v4i32 type. But that type is not legal with sse1. This ultimately gets scalarized by the second type legalization that runs after vector op legalization, but that's really intended to handle the scalar types that might be introduced by legalizing vector ops.
For now just stop this from happening by disabling the optimization with sse1.
llvm-svn: 318965
(V)PHMINPOSUW determines the UMIN element in an v8i16 input, with suitable bit flipping it can also be used for SMAX/SMIN/UMAX cases as well.
This patch matches vXi16 SMAX/SMIN/UMAX/UMIN horizontal reductions and reduces the input down to a v8i16 vector before calling (V)PHMINPOSUW.
A later patch will use this for v16i8 reductions as well (PR32841).
Differential Revision: https://reviews.llvm.org/D39729
llvm-svn: 318917
This makes the fact that X86 needs an explicit mask output not part of the type constraint for the ISD::MSCATTER.
This also gives the X86ISD::MGATHER/MSCATTER nodes a common base class simplifying the address selection code in X86ISelDAGToDAG.cpp
llvm-svn: 318823
Now we consistently represent the mask result without relying on isel ignoring it.
We now have a more general SDNode and type constraints to represent these nodes in isel patterns. This allows us to present both both vXi1 and XMM/YMM mask types with a single set of constraints.
llvm-svn: 318821
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Only do this pre-legalize in case we're using the sign extend to legalize for KNL.
This recovers all of the tests that changed when I stopped SelectionDAGBuilder from deleting sign extends.
There's more work that could be done here particularly to fix the i8->i64 test case that experienced split.
llvm-svn: 318468
The wider element type will normally cause legalize to try to split and scalarize the gather/scatter, but we can't handle that. Instead, truncate the index early so the gather/scatter node is insulated from the legalization.
This really shouldn't happen in practice since InstCombine will normalize index types to the same size as pointers.
llvm-svn: 318452
This allows us to remove extra extend creation during lowering and more accurately reflects the semantics of the instruction.
While there add an extra output VT to X86 masked gather node to better match the isel pattern predicate. Currently we're exploiting the fact that the isel table doesn't count how many output results a node actually has if the result type of any can be inferred from the first result and the type constraints defined in tablegen. I think we might ultimately want to lower all MGATHER/MSCATTER to an X86ISD node with the extra mask result and stop relying on this hole in the isel checking.
llvm-svn: 318278
The VRNDSCALE instructions implement a superset of the (V)ROUND instructions. They are equivalent if the upper 4-bits of the immediate are 0.
This patch lowers the legacy intrinsics to the VRNDSCALE ISD node and masks the upper bits of the immediate to 0. This allows us to take advantage of the larger register encoding space.
We should maybe consider converting VRNDSCALE back to VROUND in the EVEX to VEX pass if the extended registers are not being used.
I notice some load folding opportunities being missed for the VRNDSCALESS/SD instructions that I'll try to fix in future patches.
llvm-svn: 318008
I want to reuse the VRNDSCALE node for the legacy SSE rounding intrinsics so that those intrinsics can use EVEX instructions. All of these nodes share tablegen multiclasses so I split them all so that they all remain similar in their implementations.
llvm-svn: 318007
matchBinOpReduction currently matches against a single opcode, but we already have a case where we repeat calls to try to match against AND/OR and I'll be shortly adding another case for SMAX/SMIN/UMAX/UMIN (D39729).
This NFCI patch alters matchBinOpReduction to try and pattern match against any of the provided list of candidate bin ops at once to save time.
Differential Revision: https://reviews.llvm.org/D39726
llvm-svn: 317985
r317453 added new ISD nodes without rounding modes that were added to an existing if/else chain. But all the previous nodes handled there included a rounding mode. The final code after this if/else chain expected an extra operand that isn't present for the new nodes.
llvm-svn: 317748
The EVEX to VEX pass is already assuming this is true under AVX512VL. We had special patterns to use zmm instructions if VLX and F16C weren't available.
Instead just make AVX512 imply F16C to make the EVEX to VEX behavior explicitly legal and remove the extra patterns.
All known CPUs with AVX512 have F16C so this should safe for now.
llvm-svn: 317521
We still early-out for X86ISD::PEXTRW/X86ISD::PEXTRB so no actual change in behaviour, but it'll make it easier to add support in a future patch.
llvm-svn: 317485
combineExtractWithShuffle can handle more complex shuffles/bitcasts than we can with the equivalent code in XFormVExtractWithShuffleIntoLoad.
Mainly a compile time improvement now (combineExtractWithShuffle combines will have always failed late on inside XFormVExtractWithShuffleIntoLoad), and will let us merge combineExtractVectorElt_SSE in a future commit.
llvm-svn: 317481
Added TESTM and TESTNM to the list of instructions that already zeroing unused upper bits
and does not need the redundant shift left and shift right instructions afterwards.
Added a pattern for TESTM and TESTNM in iselLowering, so now icmp(neq,and(X,Y), 0) goes folds into TESTM
and icmp(eq,and(X,Y), 0) goes folds into TESTNM
This commit is a preparation for lowering the test and testn X86 intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D38732
llvm-svn: 317465
Summary:
Try to lower a BUILD_VECTOR composed of extract-extract chains that can be
reasoned to be a permutation of a vector by indices in a non-constant vector.
We saw this pattern created by ISPC, which resolts to creating it due to the
requirement that shufflevector's mask operand be a *constant* vector.
I didn't check this but we could possibly use this pattern for lowering the X86 permute
C-instrinsics instead of llvm.x86 instrinsics.
This change can be followed by more improvements:
1. Handle vectors with undef elements.
2. Utilize pshufb and zero-mask-blending to support more effiecient
construction of vectors with constant-0 elements.
3. Use smaller-element vectors of same width, and "interpolate" the indices,
when no native operation available.
Reviewers: RKSimon, craig.topper
Reviewed By: RKSimon
Subscribers: chandlerc, DavidKreitzer
Differential Revision: https://reviews.llvm.org/D39126
llvm-svn: 317463
This patch, together with a matching clang patch (https://reviews.llvm.org/D38683), implements the lowering of X86 broadcastm intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D38684
Change-Id: I709ac0b34641095397e994c8ff7e15d1315b3540
llvm-svn: 317458
Next step is to use them for the legacy FMA scalar intrinsics as well. This will enable the legacy intrinsics to use EVEX encoded opcodes and the extended registers.
llvm-svn: 317453
Summary:
AVX512 added RCP14 and RSQRT instructions which improve accuracy over the legacy RCP and RSQRT instruction, but not enough accuracy to remove the need for a Newton Raphson refinement.
Currently we use these new instructions for the legacy packed SSE instrinics, but not the scalar instrinsics. And we use it for fast math optimization of division and reciprocal sqrt.
I think switching the legacy instrinsics maybe surprising to the user since it changes the answer based on which processor you're using regardless of any fastmath settings. It's also weird that we did something different between scalar and packed.
As far at the reciprocal estimation, I think it creates unnecessary deltas in our output behavior (and prevents EVEX->VEX). A little playing around with gcc and icc and godbolt suggest they don't change which instructions they use here.
This patch adds new X86ISD nodes for the RCP14/RSQRT14 and uses those for the new intrinsics. Leaving the old intrinsics to use the old instructions.
Going forward I think our focus should be on
-Supporting 512-bit vectors, which will have to use the RCP14/RSQRT14.
-Using RSQRT28/RCP28 to remove the Newton Raphson step on processors with AVX512ER
-Supporting double precision.
Reviewers: zvi, DavidKreitzer, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39583
llvm-svn: 317413
This allows masked operations to be used and allows the register allocator to use YMM16-31 if necessary.
As a follow up I'll look into teaching EVEX->VEX how to turn this back into PERM2X128 if any of the additional features don't work out.
llvm-svn: 317403
Similar to the existing code to lower to PACKSS, we can use PACKUS if the input vector's leading zero bits extend all the way to the packed/truncated value.
We have to account for pre-SSE41 targets not supporting PACKUSDW
llvm-svn: 317315
Similar to the existing code to lower to PACKSS, we can use PACKUS if the input vector's leading zero bits extend all the way to the packed/truncated value.
We have to account for pre-SSE41 targets not supporting PACKUSDW
llvm-svn: 317128
So far we've only been using PACKSS truncations with 'all-bits or zero-bits' patterns (vector comparison results etc.). When really we can safely use it for any case as long as the number of sign bits reach down to the last 16-bits (or 8-bits if we're truncating to bytes).
The next steps after this is add the equivalent support for PACKUS and to support packing to sub-128 bit vectors for truncating stores etc.
Differential Revision: https://reviews.llvm.org/D39476
llvm-svn: 317086
Summary:
INC/DEC don't update the carry flag so we need to make sure we don't try to use it.
This patch introduces new X86ISD opcodes for locked INC/DEC. Teaches lowerAtomicArithWithLOCK to emit these nodes if INC/DEC is not slow or the function is being optimized for size. An additional flag is added that allows the INC/DEC to be disabled if the caller determines that the carry flag is being requested.
The test_sub_1_cmp_1_setcc_ugt test is currently showing this bug. The other test case changes are recovering cases that were regressed in r316860.
This should fully fix PR35068 finishing the fix started in r316860.
Reviewers: RKSimon, zvi, spatel
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39411
llvm-svn: 316913
If the carry flag is being used, this transformation isn't safe.
This does prevent some test cases from using DEC now, but I'll try to look into that separately.
Fixes PR35068.
llvm-svn: 316860
This code attempted to say that v8i16/v16i16 VSELECT is legal if BWI and VLX are enabled, but the only way we could reach this point is if the condition was not a vXi1 type. Which means it really wasn't legal.
We don't have any tests that exercise this code. So I'm hoping it wasn't really reachable.
llvm-svn: 316851
If the extend type is 64-bits, emit a 32-bit -> 64-bit extend after the UDIVREM8_ZEXT_HREG/UDIVREM8_SEXT_HREG operation.
This gives a shorter encoding for the second extend in the sext case, and allows us to completely remove the second extend in the zext case.
This also adds known bit and num sign bits support for UDIVREM8_ZEXT_HREG/SDIVREM8_SEXT_HREG.
Differential Revision: https://reviews.llvm.org/D38275
llvm-svn: 316702
Instead of loading (a potential ton of) scalar constants, load those as a vector and then insert into it.
Differential Revision: https://reviews.llvm.org/D38756
llvm-svn: 316685
By using the widest type possible for PACKSS truncation we have a better chance of being able to peek through bitcasts and improves other combines driven by ComputeNumSignBits.
llvm-svn: 316448
Remove AssertZext and instead add PEXTRW/PEXTRB support to computeKnownBitsForTargetNode to simplify instruction selection.
Differential Revision: https://reviews.llvm.org/D39169
llvm-svn: 316336
Summary: __multi3 is not available on x86 (32-bit). Setting lib call name for MULI_128 to nullptr forces DAGTypeLegalizer::ExpandIntRes_MUL to generate instructions for 128-bit multiply instead of a call to an undefined function. This fixes PR20871 though it may be worth looking at why licm and indvars combine to generate 65-bit multiplies in that test.
Patch by Riyaz V Puthiyapurayil
Reviewers: craig.topper, schweitz
Reviewed By: craig.topper, schweitz
Subscribers: RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D38668
llvm-svn: 316254
x86 has its own copy of integer absolute pattern matching to combine directly to a SUB+CMOV.
This patch removes the x86 combine and adds custom lowering support for ISD::ABS instead, allowing us to use the DAGCombiner version.
Additional test cases are already covered by iabs.ll (rL315706 and rL315711).
Differential Revision: https://reviews.llvm.org/D38895
llvm-svn: 316162
Summary:
This was impeding our ability to combine the extending shuffles with other shuffles as you can see from the test changes.
There's one special case that needed to be added to use VZEXT directly for v8i8->v8i64 since the custom lowering requires v64i8.
Reviewers: RKSimon, zvi, delena
Reviewed By: delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38714
llvm-svn: 315860
Summary:
It's better to use our shuffle lowering code to handle these than loading an immediate into a k-register.
It really feels like this should be a DAG combine optimization rather than a lowering operation, but that's a problem for another day.
Reviewers: RKSimon, delena, zvi
Reviewed By: delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38932
llvm-svn: 315849
If we are applying a byte mask to a value extracted from a shuffle, see if we can combine the mask into shuffle.
Fixes the last issue with PR22415
llvm-svn: 315807
This is particularly important for AVX512VL where we are better able to recognize the VBROADCAST loads to fold with other operations.
For AVX512VL we now use X86ISD::VBROADCAST for all of the patterns and remove the 128-bit X86ISD::VMOVDDUP.
We may be able to use this for AVX1 as well which would allow us to remove more isel patterns.
I also had to add X86ISD::VBROADCAST as a node to call combineShuffle for so that we treat it similar to X86ISD::MOVDDUP.
Differential Revision: https://reviews.llvm.org/D38836
llvm-svn: 315768
Summary: We seem to inconsistently create CMOV nodes some with a Glue result and some without. But I can't find any cases that use the Glue result. So I've tried to remove all the place that did this.
Reviewers: RKSimon, spatel, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38664
llvm-svn: 315686
Legalization of fp128 assumes things that we should have asserts for,
so that's another potential improvement.
Differential Revision: https://reviews.llvm.org/D38771
llvm-svn: 315485
Summary:
On behalf of julia.koval@intel.com
The patch transforms canonical version of unsigned saturation, which is sub(max(a,b),a) or sub(a,min(a,b)) to special psubus insturuction on targets, which support it(8bit and 16bit uints).
umax(a,b) - b -> subus(a,b)
a - umin(a,b) -> subus(a,b)
There is also extra case handled, when right part of sub is 32 bit and can be truncated, using UMIN(this transformation was discussed in https://reviews.llvm.org/D25987).
The example of special case code:
```
void foo(unsigned short *p, int max, int n) {
int i;
unsigned m;
for (i = 0; i < n; i++) {
m = *--p;
*p = (unsigned short)(m >= max ? m-max : 0);
}
}
```
Max in this example is truncated to max_short value, if it is greater than m, or just truncated to 16 bit, if it is not. It is vaid transformation, because if max > max_short, result of the expression will be zero.
Here is the table of types, I try to support, special case items are bold:
| Size | 128 | 256 | 512
| ----- | ----- | ----- | -----
| i8 | v16i8 | v32i8 | v64i8
| i16 | v8i16 | v16i16 | v32i16
| i32 | | **v8i32** | **v16i32**
| i64 | | | **v8i64**
Reviewers: zvi, spatel, DavidKreitzer, RKSimon
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37534
llvm-svn: 315237
We believe that despite AMD's documentation, that they really do support all 32 comparision predicates under AVX.
Differential Revision: https://reviews.llvm.org/D38609
llvm-svn: 315201
Return the combined shuffle from combineX86ShufflesRecursively and perform the combineTo in the caller.
Makes it easier for future patches to use this in functions that aren't actually shuffles themselves.
llvm-svn: 315195
Summary:
We currently disable some converting of shuffles to MOVSS/MOVSD during legalization if SSE41 is enabled. But later during shuffle combining we go back to prefering MOVSS/MOVSD.
Additionally we have patterns that look for BLENDIs to detect scalar arithmetic operations. I believe due to the combining using MOVSS/MOVSD these are unnecessary.
Interestingly, we still codegen blend instructions even though lowering/isel emit movss/movsd instructions. Turns out machine CSE commutes them to blend, and then commuting those blends back into blends that are equivalent to the original movss/movsd.
This patch fixes the inconsistency in legalization to prefer MOVSS/MOVSD. The one test change was caused by this change. The problem is that we have integer types and are mostly selecting integer instructions except for the shufps. This shufps forced the execution domain, but the vpblendw couldn't have its domain changed with a naive instruction swap. We could fix this by special casing VPBLENDW based on the immediate to widen the element type.
The rest of the patch is removing all the excess scalar patterns.
Long term we should probably add isel patterns to make MOVSS/MOVSD emit blends directly instead of relying on the double commute. We may also want to consider emitting movss/movsd for optsize. I also wonder if we should still use the VEX encoded blendi instructions even with AVX512. Blends have better throughput, and that may outweigh the register constraint.
Reviewers: RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38023
llvm-svn: 315181
Recognise cases when we can merge the shuffles with their horizontal (HADD/HSUB/PACK) instruction inputs.
Replaces an older implementation which performed some of this during lowering, expanding an existing target shuffle combine stage instead.
Differential Revision: https://reviews.llvm.org/D38506
llvm-svn: 315150
The SjLj intrinsics in the X86 backend are intended for use with
SjLj exception handling as well, since SVN r271244.
Differential Revision: https://reviews.llvm.org/D38532
llvm-svn: 315146
The code which lowers BUILD_VECTOR of consecutive loads into a single vector
load doesn't update chains properly. As a result the vector load can be
reordered with the store to the same location.
The current code in EltsFromConsecutiveLoads only updates the chain following
the first load. The fix is to update the chains following all the loads
comprising the vector.
This is a fix for PR10114.
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D38547
llvm-svn: 314988
Early out from vector shift by immediates that will exceed eltsize - don't bother making an unnecessary ComputeNumSignBits recursive call.
llvm-svn: 314903
The previous version didn't work if the jump table base address didn't
fit in 32 bit, since it was encoded as an immediate offset. And in case
the jump table is encoded as 32 bit label differences, we need to
load and add them to the table base first.
This solves the first half of the issues mentioned in PR34720.
Also fix some of the errors pointed out by -verify-machineinstrs, by
using GR32_NOSPRegClass.
Differential Revision: https://reviews.llvm.org/D38333
llvm-svn: 314876
If the upper bits of a truncation shuffle patterns have at least the minimum number of sign/zero bits on their inputs then we can safely use PACKSS/PACKUS as shuffles.
Partial fix for https://bugs.llvm.org/show_bug.cgi?id=34773
Differential Revision: https://reviews.llvm.org/D38472
llvm-svn: 314788
This makes sure the LSDA pointer isn't truncated to 32 bit.
Make LowerINTRINSIC_WO_CHAIN a member function instead of a static
function, so that it can use the getGlobalWrapperKind method.
This solves the second half of the issues mentioned in PR34720.
Differential Revision: https://reviews.llvm.org/D38343
llvm-svn: 314767
The refactoring in
"[X86][SSE] Add createPackShuffleMask helper function. NFCI."
resulted in warning when compiling the code (seen in build bots).
This patch restores some types from int to unsigned to avoid
those warnings.
llvm-svn: 314667
Implemented by splitting into two v32i8 mulhu/mulhs and concatenating the results.
Differential Revision: https://reviews.llvm.org/D38307
llvm-svn: 314584
If we have BWI, we can truncate in a much simpler way by using vpmovwb. This even works without VLX by using the wider zmm->ymm truncate with a subvector extract.
Differential Revision: https://reviews.llvm.org/D38375
llvm-svn: 314457
We aren't do any in register extends here so we should be able to just the target independent nodes directly and allow them to be lowered as necessary.
llvm-svn: 314447
Summary: If we have BWI instructions we can widen to v32i16 to do the multiply instead of splitting.
Reviewers: RKSimon, spatel, zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38305
llvm-svn: 314432
Previously we were using one of the subvector indices twice. The included test case causes an assert without this change.
Thanks to Simon Pilgrim for catching this.
llvm-svn: 314429
We already have zeroable bits in an APInt. We might as well use that instead of checking for an all zero BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D37950
llvm-svn: 314332
In some cases the result psadbw is smaller than the type of the add that started the match. Currently in these cases we are using a smaller add and inserting the result.
If we instead combine the psadbw with zeros and use the full size add we can take advantage of implicit zeroing we get if we emit a narrower move before the add.
In a future patch, I want to make isel aware that the psadbw itself already zeroed the upper bits and remove the move entirely.
Differential Revision: https://reviews.llvm.org/D37453
llvm-svn: 314331
As commented on D37849 and rL313547, AVX1 targets were missing a chance to use vmovmskpd for v4f64/v4i64 results for bool vector bitcasts
llvm-svn: 314293
This is necessary, but not sufficient, for having working SJLJ exception
handling on x86_64.
Differential Revision: https://reviews.llvm.org/D38254
llvm-svn: 314277
The callsite value is already stored indexed from 0 in
the _Unwind_Context struct. When accessed via the functions
_Unwind_GetIP and _Unwind_SetIP, the value is indexed from 1,
but those functions handle the offseting. When reading directly
from the struct here, we shouldn't subtract 1.
This matches the code generated by the ARM target, where SJLJ
exception handling is used by default on iOS.
This makes clang-built object files for 32 bit x86 mingw work when
linked with libgcc/libstdc++.
Differential Revision: https://reviews.llvm.org/D38251
llvm-svn: 314276
The XOP rotations act as ROTL with +ve values and ROTR with -ve values, which means that we can treat them all as ROTL with unsigned modulo. We already check that we're only trying to lower as ROTL for XOP rotations.
Differential Revision: https://reviews.llvm.org/D37949
llvm-svn: 314207
This required changing the ISD opcode for these instructions to have the commutable operands first and the addend last. This way tablegen can autogenerate the additional patterns for us.
llvm-svn: 314083
This patch acts as a reverse to combineBitcastvxi1 - bitcasting a scalar integer to a boolean vector and extending it 'in place' to the requested legal type.
Currently this doesn't handle AVX512 at all - but the current mask register approach is lacking for some cases.
Differential Revision: https://reviews.llvm.org/D35320
llvm-svn: 314076
This is a follow-up from D38181 (r314023). We have to put 64-bit
constants into a register using a separate instruction, so we
should try harder to avoid that.
From what I see, we're not likely to encounter this pattern in the
DAG because the upstream setcc combines from this don't (usually?)
produce this pattern. If we fix that, then this will become more
relevant. Since the cost of handling this case is just loosening
the predicate of the existing fold, we might as well do it now.
llvm-svn: 314064
The (non-)obvious win comes from saving 3 bytes by using the 0x83 'and' opcode variant instead of 0x81.
There are also better improvements based on known-bits that allow us to eliminate the mask entirely.
As noted, this could be extended. There are potentially other wins from always shifting first, but doing
that reveals a tangle of problems in other pattern matching. We do this transform generically in
instcombine, but we often have icmp IR that doesn't match that pattern, so we must account for this
in the backend.
Differential Revision: https://reviews.llvm.org/D38181
llvm-svn: 314023
Combine CMOV[i16]<-[SIGN,ZERO,ANY]_EXTEND to [i32,i64] into CMOV[i32,i64].
One example of where it is useful is:
before (20 bytes)
<foo>:
test $0x1,%dil
mov $0x307e,%ax
mov $0xffff,%cx
cmovne %ax,%cx
movzwl %cx,%eax
retq
after (18 bytes)
<foo>:
test $0x1,%dil
mov $0x307e,%ecx
mov $0xffff,%eax
cmovne %ecx,%eax
retq
Reviewers: craig.topper, aaboud, spatel, RKSimon, zvi
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36711
llvm-svn: 313982
The shuffle combining and lowerVectorShuffleAsLanePermuteAndBlend were both still trying to use VPERM2XF128 for unary shuffles when AVX2 is enabled. VPERM2X128 takes two inputs meaning when we use it for a unary shuffle one of those inputs is left undefined creating a false dependency on whatever register gets allocated there.
If we have VPERMQ/PD we should prefer those since they only have a single input.
Differential Revision: https://reviews.llvm.org/D37947
llvm-svn: 313542
The same code appears earlier in the function. This represents an earlier version of what became r313373 that I still had sitting in my local repo.
llvm-svn: 313465
I've moved the test cases from the InstCombine optimizations to the backend to keep the coverage we had there. It covered every possible immediate so I've preserved the resulting shuffle mask for each of those immediates.
llvm-svn: 313450
The early out for AVX2 in lowerV2X128VectorShuffle is positioned in a weird spot below some shuffle mask equivalency checks.
But I think we want to allow VPERMQ for any unary shuffle.
Differential Revision: https://reviews.llvm.org/D37893
llvm-svn: 313373
When handling a v64i1 build vector of constants on 32-bit targets we were creating an illegal i64 constant that we then bitcasted back to v64i1. We need to instead create two 32-bit constants, bitcast them to v32i1 and concat the result. We should also take care to handle the halves being all zeros/ones after the split.
This patch splits the build vector and then recursively lowers the two pieces. This allows us to handle the all ones and all zeros cases with minimal effort. Ideally we'd just do the split and concat, and let lowering get called again on the new nodes, but getNode has special handling for CONCAT_VECTORS that reassembles the pieces back into a single BUILD_VECTOR. Hopefully the two temporary BUILD_VECTORS we had to create to do this that don't get returned don't cause any issues.
Fixes PR34605.
Differential Revision: https://reviews.llvm.org/D37858
llvm-svn: 313366
Load with zero-extend and sign-extend from v2i8 to v2i32 is "Legal" since SSE4.1 and may be performed using PMOVZXBD , PMOVSXBD instructions.
llvm-svn: 313121
Fuchsia's lowest API layer has been renamed from Magenta to Zircon.
In LLVM proper, this is only mentioned in comments.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D37763
llvm-svn: 313105
The masked store instruction only cares about the sign-bit of each mask element,
so the compare s<0 isn't needed.
As noted in PR11210:
https://bugs.llvm.org/show_bug.cgi?id=11210
...fixing this should allow us to eliminate x86-specific masked store intrinsics in IR.
(Although more testing will be needed to confirm that.)
I filed a bug to track improvements for AVX512:
https://bugs.llvm.org/show_bug.cgi?id=34584
Differential Revision: https://reviews.llvm.org/D37446
llvm-svn: 313089
Recognizing this pattern during DAG combine hides information about the 'and' and the shift from other combines. I think it should be recognized at isel so its as late as possible. But it can't be done with table based isel because you need to be able to look at both immediates. This patch moves it to custom isel in X86ISelDAGToDAG.cpp.
This does break a couple tests in tbm_patterns because we are now emitting an and_flag node or (cmp and, 0) that we dont' recognize yet. We already had this problem for several other TBM patterns so I think this fine and we can address of them together.
I've also fixed a bug where the combine to BEXTR was preventing us from using a trick of zero extending AH to handle extracts of bits 15:8. We might still want to use BEXTR if it enables load folding. But honestly I hope we narrowed the load instead before got to isel.
I think we should probably also support matching BEXTR from (srl/srl (and mask << C), C). But that should be a different patch.
Differential Revision: https://reviews.llvm.org/D37592
llvm-svn: 313054
Summary:
r275950 added support for turning (trunc (X >> N) to i1) into BT(X, N). But that's no longer necessary now that i1 isn't legal.
This patch removes the support for that, but preserves some of the refactorings done in that commit.
Reviewers: guyblank, RKSimon, spatel, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37673
llvm-svn: 312925
Helps improve combineLogicBlendIntoPBLENDV support by allowing us to peek into through PACKSS truncations of vector comparison results.
Differential Revision: https://reviews.llvm.org/D37680
llvm-svn: 312916
First step towards making it possible to use the shuffle combines for cases where we don't want to call DCI.CombineTo() with the result.
llvm-svn: 312884
Summary:
Just because INC/DEC is a little slow on some processors doesn't mean we shouldn't prefer it when optimizing for size.
This appears to match gcc behavior.
Reviewers: chandlerc, zvi, RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37177
llvm-svn: 312866
Summary:
Add patterns for
fptoui <16 x float> to <16 x i8>
fptoui <16 x float> to <16 x i16>
Reviewers: igorb, delena, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37505
llvm-svn: 312704
Intrinsic handling is still creating these nodes with 32-bit elements as well. But at least this gets rid of 8 and 16.
Ideally, someday we'll convert the intrinsics to generic vector shuffles and remove the intrinsics.
llvm-svn: 312702
Summary:
Most instructions in AVX work “in-lane”, that is, each source element is applied only to other
elements of the same lane, thus a cross lane permutation is costly and needs more than one instrution.
AVX2 includes instructions to perform any-to-any permutation of words over a 256-bit register
and vectorized table lookup.
This should also Fix PR34369
Differential Revision: https://reviews.llvm.org/D37388
llvm-svn: 312608
In a future patch, I plan to teach isel to use a small vector move with implicit zeroing of the upper elements when it sees the (insert_subvector zero, X, 0) pattern.
llvm-svn: 312448
This is limited to a set of patterns based on the example in PR34111:
https://bugs.llvm.org/show_bug.cgi?id=34111
...but as I was investigating this, I see that horizontal patterns can go wrong in many,
many other ways that would not be handled by this patch. Each data type may even go
different in the DAG after starting with the same basic IR pattern, so even proper IR
canonicalization won't fix it all.
Differential Revision: https://reviews.llvm.org/D37357
llvm-svn: 312379
Prior to this patch we had a DAG combine that tried to bypass an X86ISD::ADD with -1 being added to the carry flag of some previous operation. We would then pass the carry flag directly to user.
But this is only safe if the user is looking for the carry flag and not the zero flag.
So we need to only do this combine in a context where we know what flag the consumer is using.
Fixes PR34381.
Differential Revision: https://reviews.llvm.org/D37317
llvm-svn: 312285
Summary:
This patch adjusts the patterns to make the result type of the broadcast node vXf64/vXi64. Then adds a bitcast to vXi32 after that. Intrinsic lowering was also adjusted to generate this new pattern.
Fixes PR34357
We should probably just drop the intrinsic entirely and use native IR, but I'll leave that for a future patch.
Any idea what instruction we should be lowering the floating point 128-bit result version of this pattern to? There's a 128-bit v2i32 integer broadcast but not an fp one.
Reviewers: aymanmus, zvi, igorb
Reviewed By: aymanmus
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37286
llvm-svn: 312101
EXTRACT_SUBVECTOR was marked Custom solely so we could combine it with BUILD_VECTOR operations to create smaller BUILD_VECTORS during Legalization. But that sort of combining should really be done by the DAG combiner.
This patch adds the last piece of needed supported DAG combine to handle this. Once that's done we can make the EXTRACT_SUBVECTOR operations Legal.
Differential Revision: https://reviews.llvm.org/D37197
llvm-svn: 311893
We used to do a late DAG combine to move the bitcasts out of the way, but I'm starting to think that it's better to canonicalize extract_subvector's type to match the type of its input. I've seen some cases where we've formed two different extract_subvector from the same node where one had a bitcast and the other didn't.
Add some more test cases to ensure we've also got most of the zero masking covered too.
llvm-svn: 311837
The comment for this code indicated that it should work similar to our
handling of add lowering above: if we see uses of an instruction other
than flag usage and store usage, it tries to avoid the specialized
X86ISD::* nodes that are designed for flag+op modeling and emits an
explicit test.
Problem is, only the add case actually did this. In all the other cases,
the logic was incomplete and inverted. Any time the value was used by
a store, we bailed on the specialized X86ISD node. All of this appears
to have been historical where we had different logic here. =/
Turns out, we have quite a few patterns designed around these nodes. We
should actually form them. I fixed the code to match what we do for add,
and it has quite a positive effect just within some of our test cases.
The only thing close to a regression I see is using:
notl %r
testl %r, %r
instead of:
xorl -1, %r
But we can add a pattern or something to fold that back out. The
improvements seem more than worth this.
I've also worked with Craig to update the comments to no longer be
actively contradicted by the code. =[ Some of this still remains
a mystery to both Craig and myself, but this seems like a large step in
the direction of consistency and slightly more accurate comments.
Many thanks to Craig for help figuring out this nasty stuff.
Differential Revision: https://reviews.llvm.org/D37096
llvm-svn: 311737
This goes back to a discussion about IR canonicalization. We'd like to preserve and convert
more IR to 'select' than we currently do because that's likely the best choice in IR:
http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html
...but that's often not true for codegen, so we need to account for this pattern coming in
to the backend and transform it to better DAG ops.
Steps in this patch:
1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely
enable this transform. Other targets will probably want that anyway to distinguish scalars
from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary.
2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the
vector ext is often free.
Implementing a more general fold using xor+and can be a follow-up for targets that don't have
a legal vselect. It's also possible that we can remove the TLI hook for the special case fold
implemented here because we're eliminating a constant, but it needs to be tested on other
targets.
Differential Revision: https://reviews.llvm.org/D36840
llvm-svn: 311731
This patch is intended to enable the use of basic double letter constraints used in GCC extended inline asm {Yi Y2 Yz Y0 Ym Yt}.
Supersedes D35204
Clang counterpart: D36371
Differential Revision: https://reviews.llvm.org/D36369
llvm-svn: 311644
There are no 512-bit blend instructions so we shouldn't create SHRUNKBLEND for them.
On a side note, it looks like there may be a missed opportunity for constant folding TESTM when LHS and RHS are equal.
This fixes PR34139.
Differential Revision: https://reviews.llvm.org/D36992
llvm-svn: 311572
There's no reason to have a target specific node with the same semantics as a target independent opcode.
This should simplify D36335 so that it doesn't need to touch X86ISelDAGToDAG.cpp
Differential Revision: https://reviews.llvm.org/D36983
llvm-svn: 311568
This partially reverts r311429 in favor of making ISD::isConstantSplatVector do something not confusing. Turns out the only other user of it was also having to deal with the weird property of it returning a smaller size.
So rather than continue to deal with this quirk everywhere, just make the interface do something sane.
Differential Revision: https://reviews.llvm.org/D37039
llvm-svn: 311510
ISD::isConstantSplatVector can shrink to the smallest splat width. But we don't check the size of the resulting APInt at all. This can cause us to misinterpret the results.
This patch just adds a flag to prevent the APInt from changing width.
Fixes PR34271.
Differential Revision: https://reviews.llvm.org/D36996
llvm-svn: 311429
rather than doing a separate comparison.
This both saves an explicit comparision and avoids the use of `xadd`
which introduces register constraints and other challenges to the
generated code.
The motivating case is from atomic reference counts where `1` is the
sentinel rather than `0` for whatever reason. This can and should be
lowered efficiently on x86 by just using a different flag, however the
x86 code only handled the `0` case.
There remains some further opportunities here that are currently hidden
due to canonicalization. I've included test cases that show these and
FIXMEs. However, I don't at the moment have any production use cases and
they seem substantially harder to address.
Differential Revision: https://reviews.llvm.org/D36945
llvm-svn: 311317
According to the X86ISelLowering.h, UMUL results are low, high, and flags. But this place was treating result 1 or 2 as flags.
Differential Revision: https://reviews.llvm.org/D36654
llvm-svn: 310846
Summary:
The flag result is an i32 type. But its only really used for connectivity. I don't think anything even assumes a particular format. We don't ever do any real operations on it. So known bits don't help us optimize anything.
My main motivation is that the UMUL behavior is actually wrong. I was going to fix this in D36654, but then realized there was just no reason for it to be here.
Reviewers: RKSimon, zvi, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36657
llvm-svn: 310845
Previously it would not return true for extracting either of the upper quarters of a 512-bit registers.
For mask registers we support extracting anything from index 0. And otherwise we only support extracting the upper half of a register.
Differential Revision: https://reviews.llvm.org/D36638
llvm-svn: 310794
Summary:
Without the SrcVT its hard to know what is really being asked for. For example if your target has 128, 256, and 512 bit vectors. Maybe extracting 128 from 256 is cheap, but maybe extracting 128 from 512 is not.
For x86 we do support extracting a quarter of a 512-bit register. But for i1 vectors we don't have isel patterns for extracting arbitrary pieces. So we need this to have a correct implementation of isExtractSubvectorCheap for mask vectors.
Reviewers: RKSimon, zvi, efriedma
Reviewed By: RKSimon
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D36649
llvm-svn: 310793
Add an X86 combine for TESTM when one of the operands is a BUILD_VECTOR(0,0,...).
TESTM op0, BUILD_VECTOR(0,0,...) -> BUILD_VECTOR(0,0,...)
TESTM BUILD_VECTOR(0,0,...), op1 -> BUILD_VECTOR(0,0,...)
Differential Revision:
https://reviews.llvm.org/D36536
llvm-svn: 310787
Summary:
Previously we were creating the flag result with MVT::Other which is interpretted as a Chain node. If we used a memory form of the instruction we would end up with a copyToReg that consumed the chain result of the adcx instruction instead of the flag result.
Pretty sure we should be using MVT::i32 here, that's what we do other places we create these node types.
We should probably consider this for 5.0 as well.
Reviewers: RKSimon, zvi, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36645
llvm-svn: 310784
Summary:
Previously we would use these instructions if sse was disabled and fastmath was enabled.
As mentioned in D28335, this is a bad idea.
Reviewers: efriedma, scanon, DavidKreitzer
Reviewed By: DavidKreitzer
Subscribers: zvi, llvm-commits
Differential Revision: https://reviews.llvm.org/D36344
llvm-svn: 310762
Summary:
This autoupgrades most of the broadcast intrinsics. They've been unused in clang for some time.
This leaves the 32x2 intrinsics because they are still used in clang.
Reviewers: RKSimon, zvi, igorb
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36606
llvm-svn: 310725
Summary:
This teaches 512-bit shuffles to detect unused halfs in order to reduce shuffle size.
We may need to refine the 512-bit exit point. I couldn't remember if we had good cross lane shuffles for 8/16 bit with AVX-512 or not.
I believe this is step towards being able to handle D36454 without a special case.
From here we need to improve our ability to combine extract_subvector with insert_subvector and other extract_subvectors. And we need to support narrowing binary operations where we don't demand all elements. This may be improvements to DAGCombiner::narrowExtractedVectorBinOp(by recognizing an insert_subvector in addition to concat) or we may need a target specific combiner.
Reviewers: RKSimon, zvi, delena, jbhateja
Reviewed By: RKSimon, jbhateja
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36601
llvm-svn: 310724
The previous rev (r310208) failed to account for overflow when subtracting the
constants to see if they're suitable for shift/lea. This version add a check
for that and more test were added in r310490.
We can convert any select-of-constants to math ops:
http://rise4fun.com/Alive/d7d
For this patch, I'm enhancing an existing x86 transform that uses fake multiplies
(they always become shl/lea) to avoid cmov or branching. The current code misses
cases where we have a negative constant and a positive constant, so this is just
trying to plug that hole.
The DAGCombiner diff prevents us from hitting a terrible inefficiency: we can start
with a select in IR, create a select DAG node, convert it into a sext, convert it
back into a select, and then lower it to sext machine code.
Some notes about the test diffs:
1. 2010-08-04-MaskedSignedCompare.ll - We were creating control flow that didn't exist in the IR.
2. memcmp.ll - Choose -1 or 1 is the case that got me looking at this again. We could avoid the
push/pop in some cases if we used 'movzbl %al' instead of an xor on a different reg? That's a
post-DAG problem though.
3. mul-constant-result.ll - The trade-off between sbb+not vs. setne+neg could be addressed if
that's a regression, but those would always be nearly equivalent.
4. pr22338.ll and sext-i1.ll - These tests have undef operands, so we don't actually care about these diffs.
5. sbb.ll - This shows a win for what is likely a common case: choose -1 or 0.
6. select.ll - There's another borderline case here: cmp+sbb+or vs. test+set+lea? Also, sbb+not vs. setae+neg shows up again.
7. select_const.ll - These are motivating cases for the enhancement; replace cmov with cheaper ops.
Assembly differences between movzbl and xor to avoid a partial reg stall are caused later by the X86 Fixup SetCC pass.
Differential Revision: https://reviews.llvm.org/D35340
llvm-svn: 310717
Move store merge to happen after intrinsic lowering to allow lowered
stores to be merged.
Some regressions due in MergeConsecutiveStores to missing
insert_subvector that are addressed in follow up patch.
Reviewers: craig.topper, efriedma, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34559
llvm-svn: 310710
Summary:
Preserve chain dependecies between old and new loads constructed to
prevent loads from reordering below later stores.
Fixes PR34088.
Reviewers: craig.topper, spatel, RKSimon, efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36528
llvm-svn: 310604
a legal cond operand.
When scalarizing the result of a vselect, the legalizer currently expects
to already have scalarized the operands. While this is true for the true/false
operands (which have the same type as the result), it is not case for the
condition operand. On X86 AVX512, v1i1 is legal - this leads to operations such
as '< N x type> vselect < N x i1> < N x type> < N x type>' where < N x type > is
illegal to hit an assertion during the scalarization.
The handling is similar to r205625.
This also exposes the fact that (v1i1 extract_subvector) should be legal
and selectable on AVX512 - We do this by custom lowering to vector_extract_elt.
This still leaves us in some cases with redundant dag nodes which will be
combined in a separate soon to come patch.
This fixes pr33349.
Differential revision: https://reviews.llvm.org/D36511
llvm-svn: 310552
We can convert any select-of-constants to math ops:
http://rise4fun.com/Alive/d7d
For this patch, I'm enhancing an existing x86 transform that uses fake multiplies
(they always become shl/lea) to avoid cmov or branching. The current code misses
cases where we have a negative constant and a positive constant, so this is just
trying to plug that hole.
The DAGCombiner diff prevents us from hitting a terrible inefficiency: we can start
with a select in IR, create a select DAG node, convert it into a sext, convert it
back into a select, and then lower it to sext machine code.
Some notes about the test diffs:
1. 2010-08-04-MaskedSignedCompare.ll - We were creating control flow that didn't exist in the IR.
2. memcmp.ll - Choose -1 or 1 is the case that got me looking at this again. I
think we could avoid the push/pop in some cases if we used 'movzbl %al' instead of an xor on
a different reg? That's a post-DAG problem though.
3. mul-constant-result.ll - The trade-off between sbb+not vs. setne+neg could be addressed if
that's a regression, but I think those would always be nearly equivalent.
4. pr22338.ll and sext-i1.ll - These tests have undef operands, so I don't think we actually care about these diffs.
5. sbb.ll - This shows a win for what I think is a common case: choose -1 or 0.
6. select.ll - There's another borderline case here: cmp+sbb+or vs. test+set+lea? Also, sbb+not vs. setae+neg shows up again.
7. select_const.ll - These are motivating cases for the enhancement; replace cmov with cheaper ops.
Assembly differences between movzbl and xor to avoid a partial reg stall are caused later by the X86 Fixup SetCC pass.
Differential Revision: https://reviews.llvm.org/D35340
llvm-svn: 310208
This patch is in 2 parts:
1 - replace combineBT's use of SimplifyDemandedBits (hasOneUse only) with SelectionDAG::GetDemandedBits to more aggressively determine the lower bits used by BT.
2 - update SelectionDAG::GetDemandedBits to support ANY_EXTEND - if the demanded bits are only in the non-extended portion, then peek through and demand from the source value and then ANY_EXTEND that if we found a match.
Differential Revision: https://reviews.llvm.org/D35896
llvm-svn: 309486
The X86 tail call eligibility logic was correct when it was written, but
the addition of inalloca and argument copy elision broke its
assumptions. It was assuming that fixed stack objects were immutable.
Currently, we aim to emit a tail call if no arguments have to be
re-arranged in memory. This code would trace the outgoing argument
values back to check if they are loads from an incoming stack object.
If the stack argument is immutable, then we won't need to store it back
to the stack when we tail call.
Fortunately, stack objects track their mutability, so we can just make
the obvious check to fix the bug.
This was http://crbug.com/749826
llvm-svn: 309343
Like r309323, X86 had a typo where it passed the wrong flags to TLO.
Found by inspection; I haven't been able to tickle this into having
observable behavior. I don't think it does, given that X86 doesn't have
custom demanded bits logic, and the generic logic doesn't have a lot of
exposure to illegal constructs.
llvm-svn: 309325
Assign all concat elements to zero and then just replace the first element, instead of setting them all to null and copying everything in.
llvm-svn: 309261
Changing mask argument type from const SmallVectorImpl<int>& to
ArrayRef<int>.
This came up in D35700 where a mask is received as an ArrayRef<int> and
we want to pass it to TargetLowering::isShuffleMaskLegal().
Also saves a few lines of code.
llvm-svn: 309085
splitting patch D34601 into two part. This part changes the location of two functions.
The second part will be based on that patch. This was requested by @RKSimon.
Reviewers:
1. dorit
2. Farhana
3. RKSimon
4. guyblank
5. DavidKreitzer
llvm-svn: 309084
D35067/rL308322 attempted to support up to 4 load pairs for memcmp inlining which resulted in regressions for some optimized libc memcmp implementations (PR33914).
Until we can match these more optimal cases, this patch reduces the memcmp expansion to a maximum of 2 load pairs (which matches what we do for -Os).
This patch should be considered for the 5.0.0 release branch as well
Differential Revision: https://reviews.llvm.org/D35830
llvm-svn: 308986
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
Currently we only support (i32 bitcast(v32i1)) using the AVX2 VPMOVMSKB ymm instruction.
This patch adds support for splitting pre-AVX2 targets into 2 x (V)PMOVMSKB xmm instructions and merging the integer results.
In future we could probably generalize this to handle more cases.
Differential Revision: https://reviews.llvm.org/D35303
llvm-svn: 308723
It should be a win to avoid going out to the system lib for all small memcmp() calls using scalar ops. For x86 32-bit, this means most everything up to 16 bytes. For 64-bit, that doubles because we can do 8-byte loads.
Notes:
Reduced from 4 to 2 loads for -Os behavior, which might not be optimal in all cases. It's effectively a question of how much do we trust the system implementation. Linux and macOS (and Windows I assume, but did not test) have optimized memcmp() code for x86, so it's probably not bad either way? PPC is using 8/4 for defaults on these. We do not expand at all for -Oz.
There are still potential improvements to make for the CGP expansion IR and/or lowering such as avoiding select-of-constants (D34904) and not doing zexts to the max load type before doing a compare.
We have special-case SSE/AVX codegen for (memcmp(x, y, 16/32) == 0) that will no longer be produced after this patch. I've shown the experimental justification for that change in PR33329:
https://bugs.llvm.org/show_bug.cgi?id=33329#c12
TLDR: While the vector code is a likely winner, we can't guarantee that it's a winner in all cases on all CPUs, so I'm willing to sacrifice it for the greater good of expanding all small memcmp(). If we want to resurrect that codegen, it can be done by adjusting the CGP params or poking a hole to let those fall-through the CGP expansion.
Committed on behalf of Sanjay Patel
Differential Revision: https://reviews.llvm.org/D35067
llvm-svn: 308322
This isn't legal code, but we shouldn't crash on it. Now we just don't convert the gather intrinsic if the scale isn't constant and let it go through to isel where we'll report an isel failure.
Fixes PR33772.
llvm-svn: 308267
Rename the enum value from X86_64_Win64 to plain Win64.
The symbol exposed in the textual IR is changed from 'x86_64_win64cc'
to 'win64cc', but the numeric value is kept, keeping support for
old bitcode.
Differential Revision: https://reviews.llvm.org/D34474
llvm-svn: 308208
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
x86 scalar select-of-constants (Cond ? C1 : C2) combining/lowering is a mess
with missing optimizations. We handle some patterns, but miss logical variants.
To clean that up, we should convert all select-of-constants to logic/math and
enhance the combining for the expected patterns from that. Selecting 0 or -1
needs extra attention to produce the optimal code as shown here.
Attempt to verify that all of these IR forms are logically equivalent:
http://rise4fun.com/Alive/plxs
Earlier steps in this series:
rL306040
rL306072
rL307404 (D34652)
As acknowledged in the earlier review, there's a possibility that some Intel
uarch would prefer to produce an xor to clear the fake register operand with
sbb %eax, %eax. This will likely need to be addressed in a separate pass.
llvm-svn: 307471
x86 scalar select-of-constants (Cond ? C1 : C2) combining/lowering is a mess
with missing optimizations. We handle some patterns, but miss logical variants.
To clean that up, we should convert all select-of-constants to logic/math and
enhance the combining for the expected patterns from that. DAGCombiner already
has the foundation to allow the transforms, so we just need to fill in the holes
for x86 math op lowering. Selecting 0 or -1 needs extra attention to produce the
optimal code as shown here.
Attempt to verify that all of these IR forms are logically equivalent:
http://rise4fun.com/Alive/plxs
Earlier steps in this series:
rL306040
rL306072
Differential Revision: https://reviews.llvm.org/D34652
llvm-svn: 307404
We are combining shuffles to bit shifts before unary permutes, which means we can't fold loads plus the destination register is destructive
llvm-svn: 306978
We are combining shuffles to bit shifts before unary permutes, which means we can't fold loads plus the destination register is destructive
The 32-bit shuffles are a bit tricky and will be dealt with in a later patch
llvm-svn: 306977
[X86][AVX512] Improve lowering of AVX512 compare intrinsics (remove redundant shift left+right instructions).
AVX512 compare instructions return v*i1 types.
In cases where the number of elements in the returned value are less than 8, clang adds zeroes to get a mask of v8i1 type.
Later on it's replaced with CONCAT_VECTORS, which then is lowered to many DAG nodes including insert/extract element and shift right/left nodes.
The fact that AVX512 compare instructions put the result in a k register and zeroes all its upper bits allows us to remove the extra nodes simply by copying the result to the required register class.
When lowering, identify these cases and transform them into an INSERT_SUBVECTOR node (marked legal), then catch this pattern in instructions selection phase and transform it into one avx512 cmp instruction.
Differential Revision: https://reviews.llvm.org/D33188
llvm-svn: 306402
Convert vector increment or decrement to sub/add with an all-ones constant:
add X, <1, 1...> --> sub X, <-1, -1...>
sub X, <1, 1...> --> add X, <-1, -1...>
The all-ones vector constant can be materialized using a pcmpeq instruction that is
commonly recognized as an idiom (has no register dependency), so that's better than
loading a splat 1 constant.
AVX512 uses 'vpternlogd' for 512-bit vectors because there is apparently no better
way to produce 512 one-bits.
The general advantages of this lowering are:
1. pcmpeq has lower latency than a memop on every uarch I looked at in Agner's tables,
so in theory, this could be better for perf, but...
2. That seems unlikely to affect any OOO implementation, and I can't measure any real
perf difference from this transform on Haswell or Jaguar, but...
3. It doesn't look like it from the diffs, but this is an overall size win because we
eliminate 16 - 64 constant bytes in the case of a vector load. If we're broadcasting
a scalar load (which might itself be a bug), then we're replacing a scalar constant
load + broadcast with a single cheap op, so that should always be smaller/better too.
4. This makes the DAG/isel output more consistent - we use pcmpeq already for padd x, -1
and psub x, -1, so we should use that form for +1 too because we can. If there's some
reason to favor a constant load on some CPU, let's make the reverse transform for all
of these cases (either here in the DAG or in a later machine pass).
This should fix:
https://bugs.llvm.org/show_bug.cgi?id=33483
Differential Revision: https://reviews.llvm.org/D34336
llvm-svn: 306289
This is very similar to the transform in:
https://reviews.llvm.org/rL306040
...but in this case, we use cmp X, 1 to set the carry bit as needed.
Again, we can show that all of these are logically equivalent (although
InstCombine currently canonicalizes to a form not seen here), and if
we believe IACA, then this is the smallest/fastest code. Eg, with SNB:
| Num Of | Ports pressure in cycles | |
| Uops | 0 - DV | 1 | 2 - D | 3 - D | 4 | 5 | |
---------------------------------------------------------------------
| 1 | 1.0 | | | | | | | cmp edi, 0x1
| 2 | | 1.0 | | | | 1.0 | CP | sbb eax, eax
The larger motivation is to clean up all select-of-constants combining/lowering
because we're missing some common cases.
llvm-svn: 306072
Our handling of select-of-constants is lumpy in IR (https://reviews.llvm.org/D24480),
lumpy in DAGCombiner, and lumpy in X86ISelLowering. That's why we only had the 'sbb'
codegen in 1 out of the 4 tests. This is a step towards smoothing that out.
First, show that all of these IR forms are equivalent:
http://rise4fun.com/Alive/mx
Second, show that the 'sbb' version is faster/smaller. IACA output for SandyBridge
(later Intel and AMD chips are similar based on Agner's tables):
This is the "obvious" x86 codegen (what gcc appears to produce currently):
| Num Of | Ports pressure in cycles | |
| Uops | 0 - DV | 1 | 2 - D | 3 - D | 4 | 5 | |
---------------------------------------------------------------------
| 1* | | | | | | | | xor eax, eax
| 1 | 1.0 | | | | | | CP | test edi, edi
| 1 | | | | | | 1.0 | CP | setnz al
| 1 | | 1.0 | | | | | CP | neg eax
This is the adc version:
| 1* | | | | | | | | xor eax, eax
| 1 | 1.0 | | | | | | CP | cmp edi, 0x1
| 2 | | 1.0 | | | | 1.0 | CP | adc eax, 0xffffffff
And this is sbb:
| 1 | 1.0 | | | | | | | neg edi
| 2 | | 1.0 | | | | 1.0 | CP | sbb eax, eax
If IACA is trustworthy, then sbb became a single uop in Broadwell, so this will be
clearly better than the alternatives going forward.
llvm-svn: 306040
Masked gather for vector length 2 is lowered incorrectly for element type i32.
The type <2 x i32> was automatically extended to <2 x i64> and we generated VPGATHERQQ instead of VPGATHERQD.
The type <2 x float> is extended to <4 x float>, so there is no bug for this type, but the sequence may be more optimal.
In this patch I'm fixing <2 x i32>bug and optimizing <2 x float> sequence for GATHERs only. The same fix should be done for Scatters as well.
Differential revision: https://reviews.llvm.org/D34343
llvm-svn: 305987
There are a couple of potential improvements as seen in the IR and asm:
1. We're unnecessarily extending to a larger type to compare values.
2. The codegen for (select cond, 1, -1) could avoid a cmov.
(or we could change the order of the compares, so we have a select with 0 operand)
llvm-svn: 305802
Target shuffle combining now supports the matching of INSERT_VECTOR_ELT/PINSRW/PINSRB for merging multiple insertions into shuffles/bitmasks.
llvm-svn: 305788
AVX512 compare instructions return v*i1 types.
In cases where the number of elements in the returned value are less than 8, clang adds zeroes to get a mask of v8i1 type.
Later on it's replaced with CONCAT_VECTORS, which then is lowered to many DAG nodes including insert/extract element and shift right/left nodes.
The fact that AVX512 compare instructions put the result in a k register and zeroes all its upper bits allows us to remove the extra nodes simply by copying the result to the required register class.
When lowering, identify these cases and transform them into an INSERT_SUBVECTOR node (marked legal), then catch this pattern in instructions selection phase and transform it into one avx512 cmp instruction.
Differential Revision: https://reviews.llvm.org/D33188
llvm-svn: 305465
We know that shuffle masks are power-of-2 sizes, but there's no way (?) for LLVM to know that,
so hack combineX86ShufflesRecursively() to be much faster by replacing div/rem with shift/mask.
This makes the motivating compile-time bug in PR32037 ( https://bugs.llvm.org/show_bug.cgi?id=32037 )
about 9% faster overall.
Differential Revision: https://reviews.llvm.org/D34174
llvm-svn: 305398
Much of PR32037's compile time regression is due to getTargetConstantBitsFromNode always creating large (>64bit) APInts during the bitcasting from the source data to the destination bitwidth.
This commit avoids this bitcast stage if the data is already the correct bitwidth.
llvm-svn: 305284
This step is just intended to reduce code duplication rather than change any functionality.
A follow-up would be to replace PPCTargetLowering::spliceIntoChain() usage with this new helper.
Differential Revision: https://reviews.llvm.org/D33649
llvm-svn: 305192
I was looking closer at the x86 test diffs in D33866, and the first change seems like it
shouldn't happen in the first place. So this patch will resolve that.
Using Agner's tables and AMD docs, vperm2f128 and vinsertf128 have identical timing for
any given CPU model, so we should be able to interchange those without affecting perf.
But as we can see in some of the diffs here, using vperm2f128 allows load folding, so
we should take that opportunity to reduce code size and register pressure.
A secondary advantage is making AVX1 and AVX2 codegen more similar. Given that vperm2f128
was introduced with AVX1, we should be selecting it in all of the same situations that we
would with AVX2. If there's some reason that an AVX1 CPU would not want to use this
instruction, that should be fixed up in a later pass.
Differential Revision: https://reviews.llvm.org/D33938
llvm-svn: 305171
If we know that both operands of an unsigned integer vector comparison are non-negative,
then it's safe to directly use a signed-compare-greater-than instruction (the only non-equality
integer vector compare predicate provided by SSE/AVX).
We're intentionally not changing the condition code to signed in order to preserve the
existing transforms that use min/max/psubus below here.
This should solve PR33276:
https://bugs.llvm.org/show_bug.cgi?id=33276
Differential Revision: https://reviews.llvm.org/D33862
llvm-svn: 304909
We currently generate BUILD_VECTOR as a tree of UNPCKL shuffles of the same type:
e.g. for v4f32:
Step 1: unpcklps 0, 2 ==> X: <?, ?, 2, 0>
: unpcklps 1, 3 ==> Y: <?, ?, 3, 1>
Step 2: unpcklps X, Y ==> <3, 2, 1, 0>
The issue is because we are not placing sequential vector elements together early enough, we fail to recognise many combinable patterns - consecutive scalar loads, extractions etc.
Instead, this patch unpacks progressively larger sequential vector elements together:
e.g. for v4f32:
Step 1: unpcklps 0, 2 ==> X: <?, ?, 1, 0>
: unpcklps 1, 3 ==> Y: <?, ?, 3, 2>
Step 2: unpcklpd X, Y ==> <3, 2, 1, 0>
This does mean that we are creating UNPCKL shuffle of different value types, but the relevant combines that benefit from this are quite capable of handling the additional BITCASTs that are now included in the shuffle tree.
Differential Revision: https://reviews.llvm.org/D33864
llvm-svn: 304688
Since r288804, we try to lower build_vectors on AVX using broadcasts of
float/double. However, when we broadcast integer values that happen to
have a NaN float bitpattern, we lose the NaN payload, thereby changing
the integer value being broadcast.
This is caused by ConstantFP::get, to which we pass the splat i32 as
a float (by bitcasting it using bitsToFloat). ConstantFP::get takes
a double parameter, so we end up lossily converting a single-precision
NaN to double-precision.
Instead, avoid any kinds of conversions by directly building an APFloat
from the splatted APInt.
Note that this also fixes another piece of code (broadcast of
subvectors), that currently isn't susceptible to the same problem.
Also note that we could really just use APInt and ConstantInt
throughout: the constant pool type doesn't matter much. Still, for
consistency, use the appropriate type.
llvm-svn: 304590
This might give a few better opportunities to optimize these to memcpy
rather than loops - also a few minor cleanups (StringRef-izing,
templating (to avoid std::function indirection), etc).
The SmallVector::assign(iter, iter) could be improved with the use of
SFINAE, but the (iter, iter) ctor and append(iter, iter) need it to and
don't have it - so, workaround it for now rather than bothering with the
added complexity.
(also, as noted in the added FIXME, these assign ops could potentially
be optimized better at least for non-trivially-copyable types)
llvm-svn: 304566
Summary:
Add an early combine to match patterns such as:
(i16 bitcast (v16i1 x))
->
(i16 movmsk (v16i8 sext (v16i1 x)))
This combine needs to happen early enough before
type-legalization scalarizes the result of the setcc.
Reviewers: igorb, craig.topper, RKSimon
Subscribers: delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D33311
llvm-svn: 304406
Summary:
This is a continuation of the work started in D29872 . Passing the carry down as a value rather than as a glue allows for further optimizations. Introducing setcccarry makes the use of addc/subc unecessary and we can start the removal process.
This patch only introduce the optimization strictly required to get the same level of optimization as was available before nothing more.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33374
llvm-svn: 304404
Summary:
Currently FPOWI defaults to Legal and LegalizeDAG.cpp turns Legal into Expand for this opcode because Legal is a "lie".
This patch changes the default for this opcode to Expand and removes the hack from LegalizeDAG.cpp. It also removes all the code in the targets that set this opcode to Expand themselves since they can just rely on the default.
Reviewers: spatel, RKSimon, efriedma
Reviewed By: RKSimon
Subscribers: jfb, dschuff, sbc100, jgravelle-google, nemanjai, javed.absar, andrew.w.kaylor, llvm-commits
Differential Revision: https://reviews.llvm.org/D33530
llvm-svn: 304215
AVX512_VPOPCNTDQ is a new feature set that was published by Intel.
The patch represents the LLVM side of the addition of two new intrinsic based instructions (vpopcntd and vpopcntq).
Differential Revision: https://reviews.llvm.org/D33169
llvm-svn: 303858
This patch defines the i1 type as illegal in the X86 backend for AVX512.
For DAG operations on <N x i1> types (build vector, extract vector element, ...) i8 is used, and should be truncated/extended.
This should produce better scalar code for i1 types since GPRs will be used instead of mask registers.
Differential Revision: https://reviews.llvm.org/D32273
llvm-svn: 303421
- '-verify-mahcineinstrs' starts to complain allocatable live-in physical
registers on non-entry or non-landing-pad basic blocks.
- Refactor the XBEGIN translation to define EAX on a dedicated fallback code
path due to XABORT. Add a pseudo instruction to define EAX explicitly to
avoid add physical register live-in.
Differential Revision: https://reviews.llvm.org/D33168
llvm-svn: 303306
This function gives the wrong answer on some non-ELF platforms in some
cases. The function that does the right thing lives in Mangler.h. To try to
discourage people from using this function, give it a different name.
Differential Revision: https://reviews.llvm.org/D33162
llvm-svn: 303134
Replace SelectionDAG::getNode(ISD::SELECT, ...)
and SelectionDAG::getNode(ISD::VSELECT, ...)
with SelectionDAG::getSelect(...)
Saves a few lines of code and in some cases saves the need to explicitly
check the type of the desired node.
llvm-svn: 303024
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
Avoid using report_fatal_error, because it will ask the user to file a
bug. If the user attempts to disable SSE on x86_64 and them use floating
point, that's a bug in their code, not a bug in the compiler.
This is just a start. There are other ways to crash the backend in this
configuration, but they should be updated to follow this pattern.
Differential Revision: https://reviews.llvm.org/D27522
llvm-svn: 302835
manages to form a VSELECT with a non-i1 element type condition. Those
are technically allowed in SDAG (at least, the generic type legalization
logic will form them and I wouldn't want to try to audit everything te
preclude forming them) so we need to be able to lower them.
This isn't too hard to implement. We mark VSELECT as custom so we get
a chance in C++, add a fast path for i1 conditions to get directly
handled by the patterns, and a fallback when we need to manually force
the condition to be an i1 that uses the vptestm instruction to turn
a non-mask into a mask.
This, unsurprisingly, generates awful code. But it at least doesn't
crash. This was actually impacting open source packages built with LLVM
for AVX-512 in the wild, so quickly landing a patch that at least stops
the immediate bleeding.
I think I've found where to fix the codegen quality issue, but less
confident of that change so separating it out from the thing that
doesn't change the result of any existing test case but causes mine to
not crash.
llvm-svn: 302785
Use variadic templates instead of relying on <cstdarg> + sentinel.
This enforces better type checking and makes code more readable.
Differential Revision: https://reviews.llvm.org/D32541
llvm-svn: 302571
for scalar masked instructions only the lower bit of the mask is relevant. so for constant masks we should either do an unmasked operation or no operation, depending on the value of the lower bit.
This patch handles cases where the lower bit is '1'.
Differential Revision: https://reviews.llvm.org/D32805
llvm-svn: 302546
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
Similar to what we do for vXi8 ASHR(X, 7), use SSE42's PCMPGTQ to splat the sign instead of using the PSRAD+PSHUFD.
Avoiding bitcasts this improves combines that utilize computeNumSignBits, permits memory folding and reduces pipe pressure. Although it does require a second register, given that this is a (cheap) zero register the impact is minimal.
Differential Revision: https://reviews.llvm.org/D32973
llvm-svn: 302525
Currently combineLogicBlendIntoPBLENDV can only match ASHR to detect sign splatting of a bit mask, this patch generalises this to use computeNumSignBits instead.
This is a first step in several things we can do to improve PBLENDV support:
* Better matching of X86ISD::ANDNP patterns.
* Handle floating point cases.
* Better vector and bitcast support in computeNumSignBits.
* Recognise that PBLENDV only uses the sign bit of the mask, we should be able strip away sign splats (ASHR, PCMPGT isNeg tests etc.).
Differential Revision: https://reviews.llvm.org/D32953
llvm-svn: 302424
This patch introduces an LLVM intrinsic and a target opcode for custom event
logging in XRay. Initially, its use case will be to allow users of XRay to log
some type of string ("poor man's printf"). The target opcode compiles to a noop
sled large enough to enable calling through to a runtime-determined relative
function call. At runtime, when X-Ray is enabled, the sled is replaced by
compiler-rt with a trampoline to the logic for creating the custom log entries.
Future patches will implement the compiler-rt parts and clang-side support for
emitting the IR corresponding to this intrinsic.
Reviewers: timshen, dberris
Subscribers: igorb, pelikan, rSerge, timshen, echristo, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D27503
llvm-svn: 302405
rL294581 broke unnecessary register dependencies on partial v16i8/v8i16 BUILD_VECTORs, but on SSE41 we (currently) use insertion for full BUILD_VECTORs as well. By allowing full insertion to occur on SSE41 targets we can break register dependencies here as well.
llvm-svn: 302355
This adds routines for reseting KnownBits to unknown, making the value all zeros or all ones. It also adds methods for querying if the value is zero, all ones or unknown.
Differential Revision: https://reviews.llvm.org/D32637
llvm-svn: 302262
This patch adds zext, sext, and trunc methods to KnownBits and uses them where possible.
Differential Revision: https://reviews.llvm.org/D32784
llvm-svn: 302088
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
Summary: As per discution on how to get better codegen an large int legalization, it became clear that using a glue for the carry was preventing several desirable optimizations. Passing the carry down as a value allow for more flexibility.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29872
llvm-svn: 301775
Adds a new method finalizeLowering to TargetLoweringBase. This is in
preparation for an upcoming commit.
This function is meant for target specific adjustments to
MachineFrameInfo or register reservations.
Move the freezeRegisters() and the hasCopyImplyingStackAdjustment()
handling into the new function to prove the concept. As an added bonus
GlobalISel no longer missed the hasCopyImplyingStackAdjustment()
handling with this.
Differential Revision: https://reviews.llvm.org/D32621
llvm-svn: 301679
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
llvm-svn: 301620
This patch uses various APInt methods to reduce the number of temporary APInts. These were all found while working through converting SelectionDAG's computeKnownBits to also use the KnownBits struct recently added to the ValueTracking version.
llvm-svn: 301618
This reverts commit r301105, 4, 3 and 1, as a follow up of the previous
revert, which broke even more bots.
For reference:
Revert "[APInt] Use operator<<= where possible. NFC"
Revert "[APInt] Use operator<<= instead of shl where possible. NFC"
Revert "[APInt] Use ashInPlace where possible."
PR32754.
llvm-svn: 301111
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300932 and r300930, which was causing dag-combine to
loop forever. The problem was that optimizeLogicalImm was returning
true even when there was no change to the immediate node (which happened
when the immediate was all zeros or ones), which caused dag-combine to
push and pop the same node to the work list over and over again without
making any progress.
This commit fixes the bug by returning false early in optimizeLogicalImm
if the immediate is all zeros or ones. Also, it changes the code to
compare the immediate with 0 or Mask rather than calling
countPopulation.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 301019
It seems that r300930 was creating an infinite loop in dag-combine when
compling the following file:
MultiSource/Benchmarks/MiBench/consumer-typeset/z21.c
llvm-svn: 300940
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300913, which broke bots because I didn't fix a call to
ShrinkDemandedConstant in SIISelLowering.cpp after changing the APIs of
TargetLoweringOpt and TargetLowering.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300930
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300913
getSignBit is a static function that creates an APInt with only the sign bit set. getSignMask seems like a better name to convey its functionality. In fact several places use it and then store in an APInt named SignMask.
Differential Revision: https://reviews.llvm.org/D32108
llvm-svn: 300856
This patch uses lshrInPlace to replace code where the object that lshr is called on is being overwritten with the result.
This adds an lshrInPlace(const APInt &) version as well.
Differential Revision: https://reviews.llvm.org/D32155
llvm-svn: 300566
Our 16 bit support is assembler-only + the terrible hack that is
.code16gcc. Simply using 32 bit registers does the right thing for the
latter.
Fixes PR32681.
llvm-svn: 300429
Summary:
In PR32594, inline assembly using the 'A' constraint on x86_64 causes
llvm to crash with a "Cannot select" stack trace. This is because
`X86TargetLowering::getRegForInlineAsmConstraint` hardcodes that 'A'
means the EAX and EDX registers.
However, on x86_64 it means the RAX and RDX registers, and on 16-bit x86
(ia16?) it means the old AX and DX registers.
Add new register classes in `X86RegisterInfo.td` to support these cases,
and amend the logic in `getRegForInlineAsmConstraint` to cope with
different subtargets. Also add a test case, derived from PR32594.
Reviewers: craig.topper, qcolombet, RKSimon, ab
Reviewed By: ab
Subscribers: ab, emaste, royger, llvm-commits
Differential Revision: https://reviews.llvm.org/D31902
llvm-svn: 300404
From a user prospective, it forces the use of an annoying nullptr to mark the end of the vararg, and there's not type checking on the arguments.
The variadic template is an obvious solution to both issues.
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299949
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
llvm-svn: 299925
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299699
Before r294774, there was a problem when lowering broadcasts to use
128-bit subvectors.
When we looked through a bitcast to find the broadcast input, we'd keep
using the original type, so you'd end up with things like:
(v8f32 (broadcast
(v4f32 (extract_subvector
(v8i32 V),
...))
))
r294774 fixed it to always emit subvectors with the scalar type of the
original source.
It also introduced some asserts, to check that we use scalars with
the same size, and vectors with the same number of elements.
The scalar size equality is checked earlier when looking through bitcasts,
and is a useful assert.
However, the number of elements don't have to be identical: we're always
going to extract a 128-bit subvector, and we can have different size
inputs if we looked through a concat_vector to find a 256-bit source.
Relax the overzealous assert.
Replace it with a check of the original source vector being 256 or 512
bits. If it's 128 bits, we can't extract_subvector from it.
Fixes PR32371.
llvm-svn: 299490
https://reviews.llvm.org/D30537 / https://reviews.llvm.org/rL296977 added these transforms
and other related transforms to the generic DAGCombiner (with a hook that x86 sets to true),
so these patterns should not exist by the time we reach the target-specific combiner hook.
llvm-svn: 299448
PSADBW pattern currently supports the 32 bit IR pattern and only GLT (greather than) comparison.
The patch extends the pattern to catch also 64 bit IR pattern and includes all other comparison types (not only GLT).
Differential Revision: https://reviews.llvm.org/D31577
llvm-svn: 299425
It can be costly to transfer from the gprs to the xmm registers and can prevent loads merging.
This patch splits vXi16/vXi32/vXi64 BUILD_VECTORS that use the same operand in multiple elements into a BUILD_VECTOR with only a single insertion of each of those elements and then performs an unary shuffle to duplicate the values.
There are a couple of minor regressions this patch unearths due to some missing MOVDDUP/BROADCAST folds that I will address in a future patch.
Note: Now that vector shuffle lowering and combining is pretty good we should be reusing that instead of duplicating so much in LowerBUILD_VECTOR - this is the first of several patches to address this.
Differential Revision: https://reviews.llvm.org/D31373
llvm-svn: 299387
The x86_64 ABI requires that the stack is 16 byte aligned on function calls. Thus, the 8-byte error code, which is pushed by the CPU for certain exceptions, leads to a misaligned stack. This results in bugs such as Bug 26413, where misaligned movaps instructions are generated.
This commit fixes the misalignment by adjusting the stack pointer in these cases. The adjustment is done at the beginning of the prologue generation by subtracting another 8 bytes from the stack pointer. These additional bytes are popped again in the function epilogue.
Fixes Bug 26413
Patch by Philipp Oppermann.
Differential Revision: https://reviews.llvm.org/D30049
llvm-svn: 299383
This moves the isMask and isShiftedMask functions to be class methods. They now use the MathExtras.h function for single word size and leading/trailing zeros/ones or countPopulation for the multiword size. The previous implementation made multiple temorary memory allocations to do the bitwise arithmetic operations to match the MathExtras.h implementation.
Differential Revision: https://reviews.llvm.org/D31565
llvm-svn: 299362
Our _MM_HINT_T0/T1 constant values are 3/2 which matches gcc, but not icc or Intel documentation. Interestingly gcc had this same bug on their implementation of the gather/scatter builtins at one point too.
Fixes PR32411.
llvm-svn: 299234
Currently ComputeNumSignBits returns the minimum number of sign bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original ComputeNumSignBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
I've only added support for BUILD_VECTOR and EXTRACT_VECTOR_ELT so far, all others will default to demanding all elements but can be updated in due course.
Followup to D25691.
Differential Revision: https://reviews.llvm.org/D31311
llvm-svn: 299219
Follow up to D25691, this sets up the plumbing necessary to support vector demanded elements support in known bits calculations in target nodes.
Differential Revision: https://reviews.llvm.org/D31249
llvm-svn: 299201
We currently perform the various fp_to_sint XMM conversion and then transfer to the MMX register (on 32-bit via the stack).
This patch improves support for MOVDQ2Q XMM to MMX transfers and adds the XMM->MMX fp_to_sint direct conversion patterns. The SSE2 specifications are the same as for XMM->XMM and XMM->MMX rounding/exceptions/etc.
Differential Revision: https://reviews.llvm.org/D30868
llvm-svn: 298943
This is a patch for an on-going bugzilla bug 21281 on the generated X86 code for a matrix transpose8x8 subroutine which requires vector interleaving. The generated code in AVX2 is currently non-optimal and requires 60 instructions as opposed to only 40 instructions generated for AVX1.
The patch includes a fix for the AVX2 case where vector unpack instructions use less operations than the vector blend operations available in AVX2.
In this case using vector unpack instructions is more efficient.
Reviewers:
zvi
delena
igorb
craig.topper
guyblank
eladcohen
m_zuckerman
aymanmus
RKSimon
llvm-svn: 298840
Patch to generalize combinePCMPAnd1 (for handling SETCC + ZEXT cases) to work for any input that has zero/all bits set masked with an 'all low bits' mask.
Replaced the implicit assumption of shift availability with a call to SupportedVectorShiftWithImm.
Part 1 of 3.
Differential Revision: https://reviews.llvm.org/D31347
llvm-svn: 298779
This is the payoff for D31156 - if a target has efficient comparison instructions for vector-sized equality,
we can replace memcmp calls with inline code that is both smaller and faster.
Differential Revision: https://reviews.llvm.org/D31290
llvm-svn: 298775
Up until now, vpmovm2 instruction described its destination operand size
by the source operand size. This patch adds new pattern for the vpmovm2
instruction. The node describes new expansion of the destination (from
{128|256} to 512).
Differential Revision: https://reviews.llvm.org/D30654
llvm-svn: 298586
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
We could do better by splitting any oversized type into whatever vector size the target supports,
but I left that for future work if it ever comes up. The motivating case is memcmp() calls on 16-byte
structs, so I think we can wire that up with a TLI hook that feeds into this.
Differential Revision: https://reviews.llvm.org/D31156
llvm-svn: 298376
Make x86_64-fuchsia targets under -mcmodel=kernel use %gs rather
than %fs to access ABI slots for stack-protector and safe-stack
Patch by Roland McGrath.
Differential Revision: https://reviews.llvm.org/D30870
llvm-svn: 298302
Summary:
Currently we handle these intrinsics at isel with special patterns. But as they just map to normal logic operations, we should just handle them at lowering. This will expose them to DAG combine optimizations. Right now the kor-sequence test generates a bunch of regclass copies between GR16 and VK16 that the peephole optimizer and/or register coallescing are removing to keep everything in the mask domain. By handling the logic op intrinsics earlier, these copies become bitcasts in the DAG and get removed by DAG combine which seems more robust.
This should help enable my plan to stop copying between K registers and GR8/GR16. The peephole optimizer can't remove a chain of copies between K and GR32 with insert_subreg/extract_subreg present in the chain so the kor-sequence test break. But this patch should dodge the problem entirely.
Reviewers: zvi, delena, RKSimon, igorb
Reviewed By: igorb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31056
llvm-svn: 298228
The MIR printer dumps a string that describe the register mask of a function.
A static predefined list of register masks matches a static list of strings.
However when the register mask is not from the static predefined list, there is no descriptor string and the printer fails.
This patch adds support to custom register mask printing and dumping.
Also the list of callee saved registers (describing the registers that must be preserved for the caller) might be dynamic.
As such this data needs to be dumped and parsed back to the Machine Register Info.
Differential Revision: https://reviews.llvm.org/D30971
llvm-svn: 298207
As noted in the comment, we might want to account for this case,
but I didn't look at what that would mean for the asm.
I'm also not sure why this only reproduces with avx512, but I'm
putting a conservative fix in for now to avoid the crash.
Also, if both sides of an add are zexted, shouldn't we shrink that add?
https://bugs.llvm.org/show_bug.cgi?id=32316
llvm-svn: 298107
Reduced version of D26357 - based on the discussion on llvm-dev about canonicalization of UMIN/UMAX/SMIN/SMAX as well as ABS I've reduced that patch to just the ABS ISD node (with x86/sse support) to improve basic combines and lowering.
ARM/AArch64, Hexagon, PowerPC and NVPTX all have similar instructions allowing us to make this a generic opcode and move away from the hard coded tablegen patterns which makes it tricky to match more complex patterns.
At the moment this patch doesn't attempt legalization as we only create an ABS node if its legal/custom.
Differential Revision: https://reviews.llvm.org/D29639
llvm-svn: 297780
Each Calling convention (CC) defines a static list of registers that should be preserved by a callee function. All other registers should be saved by the caller.
Some CCs use additional condition: If the register is used for passing/returning arguments – the caller needs to save it - even if it is part of the Callee Saved Registers (CSR) list.
The current LLVM implementation doesn’t support it. It will save a register if it is part of the static CSR list and will not care if the register is passed/returned by the callee.
The solution is to dynamically allocate the CSR lists (Only for these CCs). The lists will be updated with actual registers that should be saved by the callee.
Since we need the allocated lists to live as long as the function exists, the list should reside inside the Machine Register Info (MRI) which is a property of the Machine Function and managed by it (and has the same life span).
The lists should be saved in the MRI and populated upon LowerCall and LowerFormalArguments.
The patch will also assist to implement future no_caller_saved_regsiters attribute intended for interrupt handler CC.
Differential Revision: https://reviews.llvm.org/D28566
llvm-svn: 297715
For AVX-512 we force the input to zero if the input is undef or the mask is all ones to break an execution dependency. This patch brings the same behavior to AVX2.
llvm-svn: 297652
We were already forcing undef inputs to become a zero vector, this now catches an all ones mask too.
Ideally we'd use undef and let execution dep fix handle picking the best register/clearance for the undef, but I don't think it can handle the early clobber today.
llvm-svn: 297651
The immediate should be 1 or 2, not 0 or 1. This was found while adding bounds checking to clang. In fact the existing clang builtin test failed if we ran it all the way to assembly.
llvm-svn: 297591
I noticed unnecessary 'sbb' instructions in D30472 and while looking at 'ptest' codegen recently.
This happens because we were transforming any 'setb' - even when we only wanted a single-bit result.
This patch moves those transforms under visitAdd/visitSub, so we we're only creating sbb/adc when it
is a win. I don't know why we need a SETCC_CARRY node type, but I'm not proposing to change that
existing behavior in this patch.
Also, I'm skeptical that sbb/adc are a win for all micro-arches, so I added comments to the test files
where this transform still fires.
The test changes here are all cases where we no longer produce sbb/adc. Avoiding partial register
stalls (generating an xor to clear a register) is not handled in some cases, but that's a separate
issue.
Differential Revision: https://reviews.llvm.org/D30611
llvm-svn: 297586
Without SSE41 (pextrb) we currently extract byte elements from a vector by spilling to stack and reloading the byte.
This patch is an initial attempt at using MOVD/PEXTRW to extract the relevant DWORD/WORD from the vector and then shift+truncate to collect the correct byte.
Extraction of multiple bytes this way would result in code bloat, but as explained in the patch we could probably afford to be more aggressive with the supported extractions before again falling back on spilling - possibly through counting the number of extracts and which DWORD/WORD they originate?
Differential Revision: https://reviews.llvm.org/D29841
llvm-svn: 297568
We currently have to insert bits via a temporary variable of the same size as the target with various shift/mask stages, resulting in further temporary variables, all of which require the allocation of memory for large APInts (MaskSizeInBits > 64).
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::insertBits() helper method which avoids the temporary memory allocation and masks/inserts the raw bits directly into the target.
Differential Revision: https://reviews.llvm.org/D30780
llvm-svn: 297458
Summary:
Loop alignment can cause a significant change of
the perfromance for short loops.
To be able to evaluate the impact of loop alignment this change
introduces the new option x86-experimental-pref-loop-alignment.
The alignment will be 2^Value bytes, the default value is 4.
Patch by Serguei Katkov!
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D30391
llvm-svn: 297178
Use the store size of the argument type, which will be a byte-sized
quantity, rather than dividing the size in bits by 8.
Fixes PR32136 and re-enables copy elision from i64 arguments.
Reverts the workaround in from r296950.
llvm-svn: 297045
As described on PR31712, we miss a variety of legalization combines because we lower these to X86ISD::VSEXT/VZEXT despite them having the same functionality. This patch makes 128-bit (SSE41) SIGN/ZERO_EXTEND_VECTOR_IN_REG ops legal, adds the necessary tablegen plumbing and uses a helper 'getExtendInVec' to decide when to use SIGN/ZERO_EXTEND_VECTOR_IN_REG or VSEXT/VZEXT.
We're missing a couple of shuffle combines that will be added in a future patch for review.
Later patches can then support the AVX2 cases as a mixture of SIGN/ZERO_EXTEND and SIGN/ZERO_EXTEND_VECTOR_IN_REG, and then finally deal with the AVX512 cases.
Differential Revision: https://reviews.llvm.org/D30549
llvm-svn: 296985
The larger goal is to move the ADC/SBB transforms currently in
combineX86SetCC() to combineAddOrSubToADCOrSBB() because we're
creating ADC/SBB in lots of places where we shouldn't.
This was intended to be an NFC change, but avx-512 has something
strange going on. It doesn't seem like any of the affected tests
should really be using SET+TEST or ADC; a simple ADD could replace
several instructions. But that's another bug...
llvm-svn: 296978
Long ago (2010 according to svn blame), combineShuffle probably needed to prevent the accidental creation of illegal i64 types but there doesn't appear to be any combines that can cause this any more as they all have their own legality checks.
Differential Revision: https://reviews.llvm.org/D30213
llvm-svn: 296966
This fixes cases where i1 types were not properly legalized yet and lead
to the creating of 0-sized stack slots.
This fixes http://llvm.org/PR32136
llvm-svn: 296950
The comments were wrong, and this is not an obvious transform.
This hopefully makes it clearer that we're missing the commuted
patterns for adds. It's less clear that this is actually a good
transform for all micro-arch.
This is prep work for trying to clean up the current adc/sbb
codegen because it's definitely not happening optimally.
llvm-svn: 296918
MMX extraction often ends up as extract_i32(bitcast_v2i32(extract_i64(bitcast_v1i64(x86mmx v), 0)), 0) which fails to simplify on 32-bit targets as i64 isn't legal
llvm-svn: 296782
Summary:
Avoids tons of prologue boilerplate when arguments are passed in memory
and left in memory. This can happen in a debug build or in a release
build when an argument alloca is escaped. This will dramatically affect
the code size of x86 debug builds, because X86 fast isel doesn't handle
arguments passed in memory at all. It only handles the x86_64 case of up
to 6 basic register parameters.
This is implemented by analyzing the entry block before ISel to identify
copy elision candidates. A copy elision candidate is an argument that is
used to fully initialize an alloca before any other possibly escaping
uses of that alloca. If an argument is a copy elision candidate, we set
a flag on the InputArg. If the the target generates loads from a fixed
stack object that matches the size and alignment requirements of the
alloca, the SelectionDAG builder will delete the stack object created
for the alloca and replace it with the fixed stack object. The load is
left behind to satisfy any remaining uses of the argument value. The
store is now dead and is therefore elided. The fixed stack object is
also marked as mutable, as it may now be modified by the user, and it
would be invalid to rematerialize the initial load from it.
Supersedes D28388
Fixes PR26328
Reviewers: chandlerc, MatzeB, qcolombet, inglorion, hans
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29668
llvm-svn: 296683
DAGCombiner already supports peeking thorough shuffles to improve vector element extraction, but legalization often leaves us in situations where we need to extract vector elements after shuffles have already been lowered.
This patch adds support for VECTOR_EXTRACT_ELEMENT/PEXTRW/PEXTRB instructions to attempt to handle target shuffles as well. I've covered some basic scenarios including handling shuffle mask scaling and the implicit zero-extension of PEXTRW/PEXTRB, there is more that could be done here (that I've mentioned in TODOs) but I haven't found many cases where its worth it.
Differential Revision: https://reviews.llvm.org/D30176
llvm-svn: 296381
Summary:
SmallBitVector uses a malloc for more than 58 bits on a 64-bit target and more than 27 bits on a 32-bit target. Some of the vector types we deal with here use more than those number of elements and therefore cause a malloc.
APInt on the other hand supports up to 64 bits without a malloc. That's the maximum number of bits we need here so we can avoid a malloc for all cases by using APInt.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30392
llvm-svn: 296355
Summary:
SmallBitVector uses a malloc for more than 58 bits on a 64-bit target and more than 27 bits on a 32-bit target. Some of the vector types we deal with here use more than those number of elements and therefore cause a malloc.
APInt on the other hand supports up to 64 bits without a malloc. That's the maximum number of bits we need here so we can avoid a malloc for all cases by using APInt.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30390
llvm-svn: 296354
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296272
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296147
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296141
Noticed while profiling PR32037, the target shuffle ops were being stored in SmallVector<*,8> types but the combiner could store as many as 16 ops at maximum depth (2 per depth).
llvm-svn: 296130
The current pattern for setting bits in range is typically:
Mask |= APInt::getBitsSet(MaskSizeInBits, LoPos, HiPos);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation memory for the temporary variable.
This is one of the key compile time issues identified in PR32037.
This patch adds the APInt::setBits() helper method which avoids the temporary memory allocation completely, this first implementation uses setBit() internally instead but already significantly reduces the regression in PR32037 (~10% drop). Additional optimization may be possible.
I investigated whether there is need for APInt::clearBits() and APInt::flipBits() equivalents but haven't seen these patterns to be particularly common, but reusing the code would be trivial.
Differential Revision: https://reviews.llvm.org/D30265
llvm-svn: 296102
The Fuchsia ABI defines slots from the thread pointer where the
stack-guard value for stack-protector, and the unsafe stack pointer
for safe-stack, are stored. This parallels the Android ABI support.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D30237
llvm-svn: 296081
Minor optimization, don't create temporary mask APInts that are just going to be OR'd into the accumulate masks - insert directly instead.
llvm-svn: 295848
This patch introduces new X86ISD::FMAXS and X86ISD::FMINS opcodes. The legacy intrinsics now lower to this node. As do the AVX-512 masked intrinsics when the rounding mode is CUR_DIRECTION.
I've merged a copy of the tablegen multiclass avx512_fp_scalar into avx512_fp_scalar_sae. avx512_fp_scalar still needs to support CUR_DIRECTION appearing as a rounding mode for X86ISD::FADD_ROUND and others.
Differential revision: https://reviews.llvm.org/D30186
llvm-svn: 295810
Summary:
Rework the code that was sinking/duplicating (icmp and, 0) sequences
into blocks where they were being used by conditional branches to form
more tbz instructions on AArch64. The new code is more general in that
it just looks for 'and's that have all icmp 0's as users, with a target
hook used to select which subset of 'and' instructions to consider.
This change also enables 'and' sinking for X86, where it is more widely
beneficial than on AArch64.
The 'and' sinking/duplicating code is moved into the optimizeInst phase
of CodeGenPrepare, where it can take advantage of the fact the
OptimizeCmpExpression has already sunk/duplicated any icmps into the
blocks where they are used. One minor complication from this change is
that optimizeLoadExt needed to be updated to always mark 'and's it has
determined should be in the same block as their feeding load in the
InsertedInsts set to avoid an infinite loop of hoisting and sinking the
same 'and'.
This change fixes a regression on X86 in the tsan runtime caused by
moving GVNHoist to a later place in the optimization pipeline (see
PR31382).
Reviewers: t.p.northover, qcolombet, MatzeB
Subscribers: aemerson, mcrosier, sebpop, llvm-commits
Differential Revision: https://reviews.llvm.org/D28813
llvm-svn: 295746
This matches what is already done during shuffle lowering and helps prevent the need for a zero-vector in cases where shuffles match both patterns.
llvm-svn: 295723
Pull out repeated code for extraction index operand and source vector value type.
Use isNullConstant helper to check for zero extraction index.
llvm-svn: 295670
Its more profitable to go through memory (1 cycles throughput)
than using VMOVD + VPERMV/PSHUFB sequence ( 2/3 cycles throughput) to implement EXTRACT_VECTOR_ELT with variable index.
IACA tool was used to get performace estimation (https://software.intel.com/en-us/articles/intel-architecture-code-analyzer)
For example for var_shuffle_v16i8_v16i8_xxxxxxxxxxxxxxxx_i8 test from vector-shuffle-variable-128.ll I get 26 cycles vs 79 cycles.
Removing the VINSERT node, we don't need it any more.
Differential Revision: https://reviews.llvm.org/D29690
llvm-svn: 295660
Replaces existing approach that could only search BUILD_VECTOR nodes.
Requires getTargetConstantBitsFromNode to discriminate cases with all/partial UNDEF bits in each element - this should also be useful when we get around to supporting getTargetShuffleMaskIndices with UNDEF elements.
llvm-svn: 295613
As discussed on D27692, this permits another domain to be used to combine a shuffle at high depths.
We currently set the required depth at 4 or more combined shuffles, this is probably too high for most targets but is a good starting point and already helps avoid a number of costly variable shuffles.
llvm-svn: 295608
Add the infrastructure to flag whether float and/or int domains are permitable.
A future patch will enable domain crossing based off shuffle depth and the value types of the source vectors.
llvm-svn: 295604
Minor performance speedup - if any call to getShuffleScalarElt fails to get a result, don't both calling for the remaining elements as EltsFromConsecutiveLoads will fail anyhow.
llvm-svn: 295235
Summary:
We don't seem to have great rules on what a valid VBROADCAST node looks like. And as a consequence we end up with a lot of patterns to try to catch everything. We have patterns with scalar inputs, 128-bit vector inputs, 256-bit vector inputs, and 512-bit vector inputs.
As you can see from the things improved here we are currently missing patterns for 128-bit loads being extended to 256-bit before the vbroadcast.
I'd like to propose that VBROADCAST should always take a 128-bit vector type as input. As a first step towards that this patch adds an EXTRACT_SUBVECTOR in front of VBROADCAST when the input is 256 or 512-bits. In the future I would like to add scalar_to_vector around all the scalar operations. And maybe we should consider adding a VBROADCAST+load node to avoid separating loads from the broadcasting operation when the load itself isn't foldable.
This requires an additional change in target shuffle combining to look for the extract subvector and look through it to find the original operand. I'm sure this change isn't perfect but was enough to fix a few test failures that were being caused.
Another interesting thing I noticed is that the changes in masked_gather_scatter.ll show cases were we don't remove a useless insert into element 1 before broadcasting element 0.
Reviewers: delena, RKSimon, zvi
Reviewed By: zvi
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D28747
llvm-svn: 295155
We now detect that both the extract and insert indices are non-zero and convert to a shuffle. This will be lowered as a blend for 256-bit vectors or as a vshuf operations for 512-bit vectors.
llvm-svn: 294931
This results in the simplifications inside of getNode running while we're legalizing nodes popped off the worklist during the final DAG combine. This basically makes a DAG combine like operation occur during this legalize step, but we don't handle something quite the same way. I think we don't recursively added the removed nodes to the DAG combiner worklist.
llvm-svn: 294929
The target shuffle match function arguments were using the term 'Ops' but the function names referred to them as 'Inputs' - use 'Inputs' consistently.
llvm-svn: 294900
Initial 256-bit vector support - 512-bit support requires extra checks for AVX512BW support (PMOVZXBW) that will be handled in a future patch.
llvm-svn: 294896
Removes duplicate constant extraction code in getTargetShuffleMaskIndices.
getTargetConstantBitsFromNode - adds support for VZEXT_MOVL(SCALAR_TO_VECTOR) and fail if the caller doesn't support undef bits.
llvm-svn: 294856
Since r274013, we've been looking through bitcasts on broadcast inputs.
In the scalar-folding case (from a load, build_vector, or sc2vec),
the input type didn't matter, as we'd simply bitcast the resulting
scalar back.
However, when broadcasting a 128-bit-lane-aligned element, we create an
EXTRACT_SUBVECTOR. Use proper types, by creating an extract_subvector
of the original input type.
llvm-svn: 294774
In some cases we call getTargetConstantBitsFromNode for nodes that haven't been lowered from BUILD_VECTOR yet
Note: We're getting very close to being able to move most of the constant extraction code from getTargetShuffleMaskIndices into getTargetConstantBitsFromNode
llvm-svn: 294746
In combineOrCmpEqZeroToCtlzSrl, replace "getConstantOperand == 0" by "isNullConstant" to account for floating point constants.
Differential Revision: https://reviews.llvm.org/D29756
llvm-svn: 294588
LowerBuildVectorv16i8/LowerBuildVectorv8i16 insert values into a UNDEF vector if the build vector doesn't contain any zero elements, resulting in register dependencies with a previous use of the register.
This patch attempts to break the register dependency by either always zeroing the vector before hand or (if we're inserting to the 0'th element) by using VZEXT_MOVL(SCALAR_TO_VECTOR(i32 AEXT(Elt))) which lowers to (V)MOVD and performs a similar function. Additionally (V)MOVD is a shorter instruction than PINSRB/PINSRW. We already do something similar for SSE41 PINSRD.
On pre-SSE41 LowerBuildVectorv16i8 we go a little further and use VZEXT_MOVL(SCALAR_TO_VECTOR(i32 ZEXT(Elt))) if the build vector contains zeros to avoid the vector zeroing at the cost of a scalar zero extension, which can probably be brought over to the other cases in a future patch in some cases (load folding etc.)
Differential Revision: https://reviews.llvm.org/D29720
llvm-svn: 294581
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
vXi8/vXi64 vector shifts are often shifted as vYi16/vYi32 types but we weren't always remembering to bitcast the input.
Tested with a new assert as we don't currently manipulate these shifts enough for test cases to catch them.
llvm-svn: 294308
Currently we only combine shuffle nodes if they have a single user to prevent us from causing code bloat by splitting the shuffles into several different combines.
We don't take into account that in some cases we will already have combined all the users during recursively calling up the shuffle tree.
This patch keeps a list of all the shuffle nodes that have been combined so far and permits combining of further shuffle nodes if all its users are in that list.
Differential Revision: https://reviews.llvm.org/D29399
llvm-svn: 294183
Similar to what we already do for zero elt insertion, we can quickly rematerialize 'allbits' vectors so to avoid a unnecessary gpr value and insertion into a vector
llvm-svn: 294162
Similar was already done for several other shuffles in this function.
The test changes are because the old code used explicity zeroing for elements that could have been undef.
While I was here I also changed other shuffle vectors in the same function to use the same input twice instead of creating UNDEF nodes. getVectorShuffle can create the UNDEF for us.
llvm-svn: 294130
On one test this seems to have given more chance for DAG combine to do other INSERT_SUBVECTOR/EXTRACT_SUBVECTOR combines before the BLENDI was created. Looks like we can still improve more by teaching DAG combine to optimize INSERT_SUBVECTOR/EXTRACT_SUBVECTOR with BLENDI.
llvm-svn: 293944
This is a first attempt at using the MOVMSK instructions to replace all_of/any_of reduction patterns (i.e. an and/or + shuffle chain).
So far this only matches patterns where we are reducing an all/none bits source vector (i.e. a comparison result) but we should be able to expand on this in conjunction with improvements to 'bool vector' handling both in the x86 backend as well as the vectorizers etc.
Differential Revision: https://reviews.llvm.org/D28810
llvm-svn: 293880
This moves creation of SUBV_BROADCAST and merging of adjacent loads that are being inserted together.
This is a step towards removing legalizing of INSERT_SUBVECTOR except for vXi1 cases.
llvm-svn: 293872
Also add the ability to recognise PINSR(Vex, 0, Idx).
Targets shuffle combines won't replace multiple insertions with a bit mask until a depth of 3 or more, so we avoid codesize bloat.
The unnecessary vpblendw in clearupper8xi16a will be fixed in an upcoming patch.
llvm-svn: 293627
combineX86ShufflesRecursively can still only handle a maximum of 2 shuffle inputs but everything before it now supports any number of shuffle inputs.
This will be necessary for combining OR(SHUFFLE, SHUFFLE) patterns.
llvm-svn: 293560
Previously this test case fired an assertion in getNode because we tried to create an insert_subvector with both input types the same size and the index pointing to half the vector width.
llvm-svn: 293446
Replaces an xor+movd/movq with an xorps which will be shorter in codesize, avoid an int-fpu transfer, allow modern cores to fast path the result during decode and helps other combines recognise an all-zero vector.
The only reason I can think of that we'd want to keep scalar_to_vector in this case is to help recognise the upper elts are undef but this doesn't seem to be a problem.
Differential Revision: https://reviews.llvm.org/D29097
llvm-svn: 293438
PACKUSWB converts Signed word to Unsigned byte, (the same about DW) and it can't be used for umin+truncate pattern.
AVX-512 VPMOVUS* instructions fit the pattern since they convert Unsigned to Unsigned.
See https://llvm.org/bugs/show_bug.cgi?id=31773
Differential Revision: https://reviews.llvm.org/D29196
llvm-svn: 293431
Pulled out code that removed unused inputs from a target shuffle mask into a helper function to allow it to be reused in a future commit.
llvm-svn: 293175
As discussed on D28219 - it is profitable to combine trunc(binop (s/zext(x), s/zext(y)) to binop(trunc(s/zext(x)), trunc(s/zext(y))) assuming the trunc(ext()) will simplify further
llvm-svn: 292493
Summary:
Currently we expand and scalarize these operations, but I think we should be able to implement ADD/SUB with KXOR and MUL with KAND.
We already do this for scalar i1 operations so I just extended it to vectors of i1.
Reviewers: zvi, delena
Reviewed By: delena
Subscribers: guyblank, llvm-commits
Differential Revision: https://reviews.llvm.org/D28888
llvm-svn: 292474
r291670 doesn't crash on the original testcase from PR31589,
but it crashes on a slightly more complex one.
PR31589 has the new reproducer.
llvm-svn: 292444
This patch improves the mul instruction combine function (combineMul)
by adding new layer of logic.
In this patch, we are adding the ability to fold (mul x, -((1 << c) -1))
or (mul x, -((1 << c) +1)) into (neg(X << c) -x) or (neg((x << c) + x) respective.
Differential Revision: https://reviews.llvm.org/D28232
llvm-svn: 292358
Even with the fix from r291630, this still causes problems. I get
widespread assertion failures in the Swift runtime's WeakRefCount::increment()
function. I sent a reduced testcase in reply to the commit.
llvm-svn: 292242
Use v8i64 variable ASHR instructions if we don't have VLX.
This is a reduced version of D28537 that just adds support for variable shifts - I'll continue with that patch (for just constant/uniform shifts) once I've fixed the type legalization issue in avx512-cvt.ll.
Differential Revision: https://reviews.llvm.org/D28604
llvm-svn: 291901
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Some shuffles can be lowered to blend mask instruction (VPBLENDMB/VPBLENDMW/VPBLENDMD/VPBLENDMQ) .
In this patch, I added new pattern match for this case.
Reviewers:
1. craig.topper
2. guyblank
3. RKSimon
4. igorb
Differential Revision: https://reviews.llvm.org/D28483
llvm-svn: 291888
Emit SHRQ/SHLQ instead of ANDQ with a 64 bit constant mask if the result
is unused and the mask has only higher/lower bits set. For example, with
this patch LLVM emits
shrq $41, %rdi
je
instead of
movabsq $0xFFFFFE0000000000, %rcx
testq %rcx, %rdi
je
This reduces number of instructions, code size and register pressure.
The transformation is applied only for cases where the mask cannot be
encoded as an immediate value within TESTQ instruction.
Differential Revision: https://reviews.llvm.org/D28198
llvm-svn: 291806
64-bit integer division in Intel CPUs is extremely slow, much slower
than 32-bit division. On the other hand, 8-bit and 16-bit divisions
aren't any faster. The only important exception is Atom where DIV8
is fastest. Because of that, the patch
1) Enables bypassing of 64-bit division for Atom, Silvermont and
all big cores.
2) Modifies 64-bit bypassing to use 32-bit division instead of
16-bit one. This doesn't make the shorter division slower but
increases chances of taking it. Moreover, it's much more likely
to prove at compile-time that a value fits 32 bits and doesn't
require a run-time check (e.g. zext i32 to i64).
Differential Revision: https://reviews.llvm.org/D28196
llvm-svn: 291800
r289653 added a case where `vselect <cond> <vector1> <all-zeros>`
is transformed to:
`vselect xor(cond, DAG.getConstant(1, DL, CondVT) <all-zeros> <vector1>`
This was not aimed to catch cases where Cond is not a vXi1
mask but it does. Moreover, when Cond type is VxiN (N > 1)
then xor(cond, DAG.getConstant(1, DL, CondVT) != NOT(cond).
This patch changes the above to xor with allones, and avoids
entering the case for non-mask Conds.
llvm-svn: 291745
DAG patterns optimization: truncate + unsigned saturation supported by VPMOVUS* instructions in AVX-512.
And VPACKUS* instructions on SEE* targets.
Differential Revision: https://reviews.llvm.org/D28216
llvm-svn: 291670
This was reverted because it would miscompile code where the cmp had
multiple uses. That was due to a deficiency in the existing code, which
was fixed in r291630 (see the PR for details).
This re-commit includes an extra test for the kind of code that got
miscompiled: @test_sub_1_setcc_jcc.
llvm-svn: 291640
We would miscompile the following:
void g(int);
int f(volatile long long *p) {
bool b = __atomic_fetch_add(p, 1, __ATOMIC_SEQ_CST) < 0;
g(b ? 12 : 34);
return b ? 56 : 78;
}
into
pushq %rax
lock incq (%rdi)
movl $12, %eax
movl $34, %edi
cmovlel %eax, %edi
callq g(int)
testq %rax, %rax <---- Bad.
movl $56, %ecx
movl $78, %eax
cmovsl %ecx, %eax
popq %rcx
retq
because the code failed to take into account that the cmp has multiple
uses, replaced one of them, and left the other one comparing garbage.
llvm-svn: 291630
This patch fix PR31351: https://llvm.org/bugs/show_bug.cgi?id=31351
1. This patch adds new type of shuffle lowering
2. We can use the expand instruction, When the shuffle pattern is as following:
{ 0*a[0]0*a[1]...0*a[n] , n >=0 where a[] elements in a ascending order}.
Reviewers: 1. igorb
2. guyblank
3. craig.topper
4. RKSimon
Differential Revision: https://reviews.llvm.org/D28352
llvm-svn: 291584
Use the existing AVX2 v8i16 vector shift lowering for v16i8 (extending to v16i32) on AVX512 targets and v32i8 (extending to v32i16) on AVX512BW targets.
Cost model updates to follow.
llvm-svn: 291451
Use the existing AVX2 v8i16 vector shift lowering for v16i16 on AVX512 targets (AVX512BW will have already have lowered with vpsravw).
Cost model updates to follow.
llvm-svn: 291445
I noticed this problem as part of the ongoing attempt to canonicalize min/max ops in IR.
The debug output shows nodes like this:
t4: i32 = xor t2, Constant:i32<-1>
t21: i8 = setcc t4, Constant:i32<0>, setlt:ch
t14: i32 = select t21, t4, Constant:i32<-1>
And because the select is holding onto the t4 (xor) node while EmitTest creates a new
x86-specific xor node, the lowering results in:
t4: i32 = xor t2, Constant:i32<-1>
t25: i32,i32 = X86ISD::XOR t2, Constant:i32<-1>
t28: i32,glue = X86ISD::CMOV Constant:i32<-1>, t4, Constant:i8<15>, t25:1
Differential Revision: https://reviews.llvm.org/D28374
llvm-svn: 291392
Summary:
For instructions such as PSLLW/PSLLD/PSLLQ a variable shift amount may be passed in an XMM register.
The lower 64-bits of the register are evaluated to determine the shift amount.
This patch improves the construction of the vector containing the shift amount.
Reviewers: craig.topper, delena, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28353
llvm-svn: 291120
In some cases its more efficient to combine TRUNC( BINOP( X, Y ) ) --> BINOP( TRUNC( X ), TRUNC( Y ) ) if the binop is legal for the truncated types.
This is true for vector integer multiplication (especially vXi64), as well as ADD/AND/XOR/OR in cases where we only need to truncate one of the inputs at runtime (e.g. a duplicated input or an one use constant we can fold).
Further work could be done here - scalar cases (especially i64) could often benefit (if we avoid partial registers etc.), other opcodes, and better analysis of when truncating the inputs reduces costs.
I have considered implementing this for all targets within the DAGCombiner but wasn't sure we could devise a suitable cost model system that would give us the range we need.
Differential Revision: https://reviews.llvm.org/D28219
llvm-svn: 290947
This reverts commit r290694. It broke sanitizer tests on Win64. I'll
probably bring this back, but the jump tables will just live in .text
like they do for MSVC.
llvm-svn: 290714
Summary:
We were already using 32-bit jump table entries, but this was a
consequence of the default PIC model on Win64, and not an intentional
design decision. This patch ensures that we always use 32-bit label
difference jump table entries on Win64 regardless of the PIC model. This
is a good idea because it saves executable size and object file size.
Moving the jump tables to .rdata cleans up the disassembled object code
and reduces the available ROP targets, but it requires adding one more
RIP-relative lea to the code. COFF doesn't have relocations to express
the difference between two arbitrary symbols, so we can't use the jump
table label in the label difference like we do elsewhere.
Fixes PR31488
Reviewers: majnemer, compnerd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28141
llvm-svn: 290694
I added API for creation a target specific memory node in DAG. Today, all memory nodes are common for all targets and their constructors are located in SelectionDAG.cpp.
There are some cases in X86 where we need to create a special node - truncation-with-saturation store, float-to-half-store.
In the current patch I added truncation-with-saturation nodes and I'm using them for intrinsics. In the future I plan to implement DAG lowering for truncation-with-saturation pattern.
Differential Revision: https://reviews.llvm.org/D27899
llvm-svn: 290250
The vectorcall calling convention specifies that arguments to functions are to be passed in registers, when possible.
vectorcall uses more registers for arguments than fastcall or the default x64 calling convention use.
The vectorcall calling convention is only supported in native code on x86 and x64 processors that include Streaming SIMD Extensions 2 (SSE2) and above.
The current implementation does not handle Homogeneous Vector Aggregates (HVAs) correctly and this review attempts to fix it.
This aubmit also includes additional lit tests to cover better HVAs corner cases.
Differential Revision: https://reviews.llvm.org/D27392
llvm-svn: 290240
I haven't managed to get this to fail yet but its technically possible for the AND -> shuffle decomposition to result in illegal types.
llvm-svn: 290183
Not sure whether it causes and ASAN false positive or whether it
actually leads to incorrect code or whether it even exposes bad code.
Hans, I'll get you instructions to reproduce this.
llvm-svn: 290066
These nodes are only emitted for lowering FABS/FNEG/FNABS/FCOPYSIGN. Ideally we just wouldn't create these nodes if SSE2 or higher is available, but it was simple to just convert them in DAG combine.
For SSE2, AVX, and AVX512 with DQI this is no functional change as the execution domain fixing pass ensures the right domain is selected regardless of the ISD opcode.
For AVX-512 without DQI we end up using integer instructions since the floating point versions aren't available. But we were already doing that for any logical operations in code that didn't come from FABS/FNEG/FNABS/FCOPYSIGN so this seems no worse. And we get the benefit of being able to fold broadcasts now.
llvm-svn: 290060
atomic_load_add returns the value before addition, but sets EFLAGS based on the
result of the addition. That means it's setting the flags based on effectively
subtracting C from the value at x, which is also what the outer cmp does.
This targets a pattern that occurs frequently with reference counting pointers:
void decrement(long volatile *ptr) {
if (_InterlockedDecrement(ptr) == 0)
release();
}
Clang would previously compile it (for 32-bit at -Os) as:
00000000 <?decrement@@YAXPCJ@Z>:
0: 8b 44 24 04 mov 0x4(%esp),%eax
4: 31 c9 xor %ecx,%ecx
6: 49 dec %ecx
7: f0 0f c1 08 lock xadd %ecx,(%eax)
b: 83 f9 01 cmp $0x1,%ecx
e: 0f 84 00 00 00 00 je 14 <?decrement@@YAXPCJ@Z+0x14>
14: c3 ret
and with this patch it becomes:
00000000 <?decrement@@YAXPCJ@Z>:
0: 8b 44 24 04 mov 0x4(%esp),%eax
4: f0 ff 08 lock decl (%eax)
7: 0f 84 00 00 00 00 je d <?decrement@@YAXPCJ@Z+0xd>
d: c3 ret
(Equivalent variants with _InterlockedExchangeAdd, std::atomic<>'s fetch_add
or pre-decrement operator generate the same code.)
Differential Revision: https://reviews.llvm.org/D27781
llvm-svn: 289955
This is a tiny patch with a big pile of test changes.
This partially fixes PR27885:
https://llvm.org/bugs/show_bug.cgi?id=27885
My motivating case looks like this:
- vpshufd {{.*#+}} xmm1 = xmm1[0,1,0,2]
- vpshufd {{.*#+}} xmm0 = xmm0[0,2,2,3]
- vpblendw {{.*#+}} xmm0 = xmm0[0,1,2,3],xmm1[4,5,6,7]
+ vshufps {{.*#+}} xmm0 = xmm0[0,2],xmm1[0,2]
And this happens several times in the diffs. For chips with domain-crossing penalties,
the instruction count and size reduction should usually overcome any potential
domain-crossing penalty due to using an FP op in a sequence of int ops. For chips such
as recent Intel big cores and Atom, there is no domain-crossing penalty for shufps, so
using shufps is a pure win.
So the test case diffs all appear to be improvements except one test in
vector-shuffle-combining.ll where we miss an opportunity to use a shift to generate
zero elements and one test in combine-sra.ll where multiple uses prevent the expected
shuffle combining.
Differential Revision: https://reviews.llvm.org/D27692
llvm-svn: 289837
adding new optimization opportunity by adding new X86ISelLowering pattern. The test case was shown in https://llvm.org/bugs/show_bug.cgi?id=30945.
Test explanation:
Select gets three arguments mask, op and op2. In this case, the Mask is a result of ICMP. The ICMP instruction compares (with equal operand) the zero initializer vector and the result of the first ICMP.
In general, The result of "cmp eq, op1, zero initializers" is "not(op1)" where op1 is a mask. By rearranging of the two arguments inside the Select instruction, we can get the same result. Without the necessary of the middle phase ("cmp eq, op1, zero initializers").
Missed optimization opportunity:
vpcmpled %zmm0, %zmm1, %k0
knotw %k0, %k1
can be combine to
vpcmpgtd %zmm0, %zmm2, %k1
Reviewers:
1. delena
2. igorb
Commited after check all
Differential Revision: https://reviews.llvm.org/D27160
llvm-svn: 289653
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
PMULDQ returns the 64-bit result of the signed multiplication of the lower 32-bits of vXi64 vector inputs, we can lower with this if the sign bits stretch that far.
Differential Revision: https://reviews.llvm.org/D27657
llvm-svn: 289426
Regcall calling convention passes mask types arguments in x86 GPR registers.
The review includes the changes required in order to support v32i1, v16i1 and v8i1.
Differential Revision: https://reviews.llvm.org/D27148
llvm-svn: 289383
Simon Pilgrim