Prefer the more exact intrinsic to remove a use of the input value
and possibly make further transforms easier (we will still need
to match patterns with funnel-shift of wider types as pieces of
bswap, especially if we want to canonicalize to funnel-shift with
constant shift amount). Discussed in D46760.
llvm-svn: 364187
I'm not 100% sure about this, since I'm worried about IR transforms
that might end up introducing divergence downstream once replaced with
a constant, but I haven't come up with an example yet.
llvm-svn: 363406
When the byval attribute has a type, it must match the pointee type of
any parameter; but InstCombine was not updating the attribute when
folding casts of various kinds away.
llvm-svn: 362643
Based on the overflow direction information added in D62463, we can
now fold always overflowing signed saturating add/sub to signed min/max.
Differential Revision: https://reviews.llvm.org/D62544
llvm-svn: 362006
In order to fold an always overflowing signed saturating add/sub,
we need to know in which direction the always overflow occurs.
This patch splits up AlwaysOverflows into AlwaysOverflowsLow and
AlwaysOverflowsHigh to pass through this information (but it is
not used yet).
Differential Revision: https://reviews.llvm.org/D62463
llvm-svn: 361858
We were turning roundss/sd/ps/pd intrinsics with immediates of 1 or 2 into
llvm.floor/ceil. The llvm.ceil/floor intrinsics are supposed to correspond
to the libm functions. For the libm functions we need to disable the
precision exception so the llvm.floor/ceil functions should always map to
encodings 0x9 and 0xA.
We had a mix of isel patterns where some used 0x9 and 0xA and others used
0x1 and 0x2. We need to be consistent and always use 0x9 and 0xA.
Since we have no way in isel of knowing where the llvm.ceil/floor came
from, we can't map X86 specific intrinsics with encodings 1 or 2 to it.
We could map 0x9 and 0xA to llvm.ceil/floor instead, but I'd really like
to see a use case and optimization advantage first.
I've left the backend test cases to show the blend we now emit without
the extra isel patterns. But I've removed the InstCombine tests completely.
llvm-svn: 361425
This patch rewrites the existing PACKSS/PACKUS constant folding code to expand as a generic expansion.
This is a first NFCI step toward expanding PACKSS/PACKUS intrinsics which are acting as non-saturating truncations (although technically the expansion could be used in all cases - but we'll probably want to be conservative).
llvm-svn: 359111
If we have a masked.load from a location we know to be dereferenceable, we can simply issue a speculative unconditional load against that address. The key advantage is that it produces IR which is well understood by the optimizer. The select (cnd, load, passthrough) form produced should be pattern matchable back to hardware predication if profitable.
Differential Revision: https://reviews.llvm.org/D59703
llvm-svn: 359000
If we have a store to a piece of memory which is known constant, then we know the store must be storing back the same value. As a result, the store (or memset, or memmove) must either be down a dead path, or a noop. In either case, it is valid to simply remove the store.
The motivating case for this involves a memmove to a buffer which is constant down a path which is dynamically dead.
Note that I'm choosing to implement the less aggressive of two possible semantics here. We could simply say that the store *is undefined*, and prune the path. Consensus in the review was that the more aggressive form might be a good follow on change at a later date.
Differential Revision: https://reviews.llvm.org/D60659
llvm-svn: 358919
In the process, use the existing masked.load combine which is slightly stronger, and handles a mix of zero and undef elements in the mask.
llvm-svn: 358913
In InstCombine, we use an idiom of "store i1 true, i1 undef" to indicate we've found a path which we've proven unreachable. We can't actually insert the unreachable instruction since that would require changing the CFG. We leave that to simplifycfg later.
This just factors out that idiom creation so we don't duplicate the same mostly undocument idiom creation in multiple places.
llvm-svn: 358600
If a constant shift amount is used, then only some of the LHS/RHS
operand bits are demanded and we may be able to simplify based on
that. InstCombineSimplifyDemanded already had the necessary support
for that, we just weren't calling it with fshl/fshr as root.
In particular, this allows us to relax some masked funnel shifts
into simple shifts, as shown in the tests.
Patch by Shawn Landden.
Differential Revision: https://reviews.llvm.org/D60660
llvm-svn: 358515
Summary:
Enable some of the existing size optimizations for cold code under PGO.
A ~5% code size saving in big internal app under PGO.
The way it gets BFI/PSI is discussed in the RFC thread
http://lists.llvm.org/pipermail/llvm-dev/2019-March/130894.html
Note it doesn't currently touch loop passes.
Reviewers: davidxl, eraman
Reviewed By: eraman
Subscribers: mgorny, javed.absar, smeenai, mehdi_amini, eraman, zzheng, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59514
llvm-svn: 358422
ssubo X, C is equivalent to saddo X, -C. Make the transformation in
InstCombine and allow the logic implemented for saddo to fold prior
usages of add nsw or sub nsw with constants.
Patch by Dan Robertson.
Differential Revision: https://reviews.llvm.org/D60061
llvm-svn: 358099
First step towards removing the MOVMSK intrinsics completely - this patch expands MOVMSK to the pattern:
e.g. PMOVMSKB(v16i8 x):
%cmp = icmp slt <16 x i8> %x, zeroinitializer
%int = bitcast <16 x i8> %cmp to i16
%res = zext i16 %int to i32
Which is correctly handled by ISel and FastIsel (give or take an annoying movzx move....): https://godbolt.org/z/rkrSFW
Differential Revision: https://reviews.llvm.org/D60256
llvm-svn: 357909
If we know we're not storing a lane, we don't need to compute the lane. This could be improved by using the undef element result to further prune the mask, but I want to separate that into its own change since it's relatively likely to expose other problems.
Differential Revision: https://reviews.llvm.org/D57247
llvm-svn: 356590
Follow-up to:
rL356338
rL356369
We can calculate an arbitrary vector constant minus the bitwidth, so there's
no need to limit this transform to scalars and splats.
llvm-svn: 356372
Follow-up to:
rL356338
Rotates are a special case of funnel shift where the 2 input operands
are the same value, but that does not need to be a restriction for the
canonicalization when the shift amount is a constant.
llvm-svn: 356369
This was noted as a backend problem:
https://bugs.llvm.org/show_bug.cgi?id=41057
...and subsequently fixed for x86:
rL356121
But we should canonicalize these in IR for the benefit of all targets
and improve IR analysis such as CSE.
llvm-svn: 356338
A change of two parts:
1) A generic enhancement for all callers of SDVE to exploit the fact that if all lanes are undef, the result is undef.
2) A GEP specific piece to strengthen/fix the vector index undef element handling, and call into the generic infrastructure when visiting the GEP.
The result is that we replace a vector gep with at least one undef in each lane with a undef. We can also do the same for vector intrinsics. Once the masked.load patch (D57372) has landed, I'll update to include call tests as well.
Differential Revision: https://reviews.llvm.org/D57468
llvm-svn: 356293
The shift argument is defined to be modulo the bitwidth, so if that argument
is a constant, we can always reduce the constant to its minimal form to allow
better CSE and other follow-on transforms.
We need to be careful to ignore constant expressions here, or we will likely
infinite loop. I'm adding a general vector constant query for that case.
Differential Revision: https://reviews.llvm.org/D59374
llvm-svn: 356192
This indicates an intrinsic parameter is required to be a constant,
and should not be replaced with a non-constant value.
Add the attribute to all AMDGPU and generic intrinsics that comments
indicate it should apply to. I scanned other target intrinsics, but I
don't see any obvious comments indicating which arguments are intended
to be only immediates.
This breaks one questionable testcase for the autoupgrade. I'm unclear
on whether the autoupgrade is supposed to really handle declarations
which were never valid. The verifier fails because the attributes now
refer to a parameter past the end of the argument list.
llvm-svn: 355981
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
An unused variable problem was introduced with rL352870
and stubbed out with rL352871, but we can make a better
fix by actually using the local variable in code rather
than just the assert.
llvm-svn: 352873
If we can reduce the x86-specific intrinsic to the generic op, it allows existing
simplifications and value tracking folds. AFAICT, this always results in identical
x86 codegen in the non-reduced case...which should be true because we semi-generically
(too aggressively IMO) convert to llvm.uadd.with.overflow in CGP, so the DAG/isel must
already combine/lower this intrinsic as expected.
This isn't quite what was requested in:
https://bugs.llvm.org/show_bug.cgi?id=40486
...but we want to have these kinds of folds early for efficiency and to enable greater
simplifications. For the case in the bug report where we have:
_addcarry_u64(0, ahi, 0, &ahi)
...this gets completely simplified away in IR.
Differential Revision: https://reviews.llvm.org/D57453
llvm-svn: 352870
This is meant to be used with clang's __builtin_dynamic_object_size.
When 'true' is passed to this parameter, the intrinsic has the
potential to be folded into instructions that will be evaluated
at run time. When 'false', the objectsize intrinsic behaviour is
unchanged.
rdar://32212419
Differential revision: https://reviews.llvm.org/D56761
llvm-svn: 352664
The point is that this simplifies integration of new intrinsics into SimplifiedDemandedVectorElts, and ensures we don't miss any existing ones.
This is intended to be NFC-ish, but as seen from the diffs, can produce slightly different output. This is due to order of transforms w/in instcombine resulting in two slightly different fixed points. That's something we should fix, but isn't a problem w/this patch per se.
Differential Revision: https://reviews.llvm.org/D57398
llvm-svn: 352653
Sanjay Patel