128/256 bit scalar_to_vectors are canonicalized to (insert_subvector undef, (scalar_to_vector), 0). We have isel patterns that try to match this pattern being used by a vzmovl to use a 128-bit instruction and a subreg_to_reg.
This patch detects the insert_subvector undef portion of this and pulls it through the vzmovl, creating a narrower vzmovl and an insert_subvector allzeroes. We can then match the insertsubvector into a subreg_to_reg operation by itself. Then we can fall back on existing (vzmovl (scalar_to_vector)) patterns.
Note, while the scalar_to_vector case is the motivating case I didn't restrict to just that case. I'm also wondering about shrinking any 256/512 vzmovl to an extract_subvector+vzmovl+insert_subvector(allzeros) but I fear that would have bad implications to shuffle combining.
I also think there is more canonicalization we can do with vzmovl with loads or scalar_to_vector with loads to create vzload.
Differential Revision: https://reviews.llvm.org/D63512
llvm-svn: 364095
This should be unreachable, but bugs can make it reachable. This
adds a debug print so we can see the bad node in the output when
the llvm_unreachable triggers.
llvm-svn: 364091
With this we can now fully code generate jump tables, which is important for code size.
Differential Revision: https://reviews.llvm.org/D63223
llvm-svn: 364086
This change makes use of the newly refactored SwitchLoweringUtils code from
SelectionDAG to in order to generate jump tables and range checks where appropriate.
Much of this code is ported from SDAG with some modifications. We generate
G_JUMP_TABLE and G_BRJT instructions when JT opportunities are found. This means
that targets which previously relied on the naive one MBB per case stmt
translation will now start falling back until they add support for the new opcodes.
For range checks, we don't generate any previously unused operations. This
just recognizes contiguous ranges of case values and generates a single block per
range. Single case value blocks are just a special case of ranges so we get that
support almost for free.
There are still some optimizations missing that I haven't ported over, and
bit-tests are also unimplemented. This patch series is already complex enough.
Actual arm64 support for selection of jump tables is coming in a later patch.
Differential Revision: https://reviews.llvm.org/D63169
llvm-svn: 364085
This patch introduces a new heuristic for guiding operand reordering. The new "look-ahead" heuristic can look beyond the immediate predecessors. This helps break ties when the immediate predecessors have identical opcodes (see lit test for an example).
Committed on behalf of @vporpo (Vasileios Porpodas)
Differential Revision: https://reviews.llvm.org/D60897
llvm-svn: 364084
We already use vmovq for v2i64/v2f64 vzmovl. But we were using a
blendpd+xorpd for v4i64/v4f64/v8i64/v8f64 under opt speed. Or
movsd+xorpd under optsize.
I think the blend with 0 or movss/d is only needed for
vXi32 where we don't have an instruction that can move 32
bits from one xmm to another while zeroing upper bits.
movq is no worse than blendpd on any known CPUs.
llvm-svn: 364079
We sometimes get poor code size because constants of types < 32b are legalized
as 32 bit G_CONSTANTs with a truncate to fit. This works but means that the
localizer can no longer sink them (although it's possible to extend it to do so).
On AArch64 however s8 and s16 constants can be selected in the same way as s32
constants, with a mov pseudo into a W register. If we make s8 and s16 constants
legal then we can avoid unnecessary truncates, they can be CSE'd, and the
localizer can sink them as normal.
There is a caveat: if the user of a smaller constant has to widen the sources,
we end up with an anyext of the smaller typed G_CONSTANT. This can cause
regressions because of the additional extend and missed pattern matching. To
remedy this, there's a new artifact combiner to generate the wider G_CONSTANT
if it's legal for the target.
Differential Revision: https://reviews.llvm.org/D63587
llvm-svn: 364075
Summary:
The motivation for this was to propagate fast-math flags like nnan and
ninf on vector floating point operations to the corresponding scalar
operations to take advantage of follow-on optimizations. But I think
the same argument applies to all of our IR flags: if they apply to the
vector operation then they also apply to all the individual scalar
operations, and they might enable follow-on optimizations.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63593
llvm-svn: 364051
Summary:
LLVM Allows Targets to provide information that guides optimisations
made to LLVM IR. This is done with callbacks on a TargetTransformInfo object.
This patch adds a TargetTransformInfo class for RISC-V. This will allow us to
implement RISC-V specific callbacks as they become necessary.
This commit also adds the getIntImmCost callbacks, and tests them with a simple
constant hoisting test. Our immediate costs are on the conservative side, for
the moment, but we prevent hoisting in most circumstances anyway.
Previous review was on D63007
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: ributzka, MaskRay, llvm-commits, Jim, benna, psnobl, jocewei, PkmX, rkruppe, the_o, brucehoult, MartinMosbeck, rogfer01, edward-jones, zzheng, jrtc27, shiva0217, kito-cheng, niosHD, sabuasal, apazos, simoncook, johnrusso, rbar, hiraditya, mgorny
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63433
llvm-svn: 364046
These instructions let you load half a vector register at once from
two general-purpose registers, or vice versa.
The assembly syntax for these instructions mentions the vector
register name twice. For the move _into_ a vector register, the MC
operand list also has to mention the register name twice (once as the
output, and once as an input to represent where the unchanged half of
the output register comes from). So we can conveniently assign one of
the two asm operands to be the output $Qd, and the other $QdSrc, which
avoids confusing the auto-generated AsmMatcher too much. For the move
_from_ a vector register, there's no way to get round the fact that
both instances of that register name have to be inputs, so we need a
custom AsmMatchConverter to avoid generating two separate output MC
operands. (And even that wouldn't have worked if it hadn't been for
D60695.)
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62679
llvm-svn: 364041
This adds the `MVE_qDest_rSrc` superclass and all its instances, plus
a few other instructions that also take a scalar input register or two.
I've also belatedly added custom diagnostic messages to the operand
classes for odd- and even-numbered GPRs, which required matching
changes in two of the existing MVE assembly test files.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62678
llvm-svn: 364040
llvm-mc or clang with -g normally produces debug info describing the
assembler source itself; however, if that source already contains some
.file/.loc directives, we should instead emit the debug info described
by those directives. For certain assembler sources seen in the wild
(particularly in the Chrome build) this was causing a crash due to
incorrect assumptions about legal sequences of assembler source text.
Fixes PR38994.
Differential Revision: https://reviews.llvm.org/D63573
llvm-svn: 364039
The sat add/sub tests still have unnecessary extract_subvector((vandnps ymm, ymm), 0) uses that should be split to (vandnps (extract_subvector(ymm, 0), extract_subvector(ymm, 0)), but its getting better.
llvm-svn: 364038
Summary:
This adds the `MVE_qDest_qSrc` superclass and all instructions that
inherit from it. It's not the complete class of _everything_ with a
q-register as both destination and source; it's a subset of them that
all have similar encodings (but it would have been hopelessly unwieldy
to call it anything like MVE_111x11100).
This category includes add/sub with carry; long multiplies; halving
multiplies; multiply and accumulate, and some more complex
instructions.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62677
llvm-svn: 364037
Summary:
These take a pair of vector register to compare, and a comparison type
(written in the form of an Arm condition suffix); they output a vector
of booleans in the VPR register, where predication can conveniently
use them.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62676
llvm-svn: 364027
G_INTTOPTR can prevent the localizer from moving G_CONSTANTs, but since it's
essentially a side effect free cast instruction we can remat both instructions.
This patch changes the localizer to enable localization of the chains by
iterating over the entry block instructions in reverse order. That way, uses will
localized first, and then the defs are free to be localized as well.
This also changes the previous SmallPtrSet of localized instructions to use a
SetVector instead. We're dealing with pointers and need deterministic iteration
order.
Overall, this change improves ARM64 -O0 CTMark code size by around 0.7% geomean.
Differential Revision: https://reviews.llvm.org/D63630
llvm-svn: 364001
Also, add a FIXME for the unsafe transform on a unary FNeg. A unary FNeg can only be transformed to a FMul by -1.0 when the nnan flag is present. The unary FNeg project is a WIP, so the unsafe transformation is acceptable until that work is complete.
The bogus assert with introduced in D63445.
llvm-svn: 363998
As discussed in PR42314:
https://bugs.llvm.org/show_bug.cgi?id=42314
Improving the canonicalization for these patterns:
rL363956
...means we should adjust/enhance the related simplification.
https://rise4fun.com/Alive/w1cp
Name: isPow2 or zero
%x = and i32 %xx, 2048
%a = add i32 %x, -1
%r = and i32 %a, %x
=>
%r = i32 0
llvm-svn: 363997
Every called function could possibly need this to calculate the
absolute address of stack objectst, and this avoids inserting a copy
around every call site in the kernel. It's also somewhat cleaner to
keep this in a callee saved SGPR.
llvm-svn: 363990
Teach RegisterBankInfo to use the correct register class, and tell the
legalizer it's legal. Everything else just works.
The one thing that's slightly weird about this compared to SelectionDAG
isel is that legalization can't distinguish between i64 and <1 x i64>,
so we might end up with more NEON instructions than the user expects.
Differential Revision: https://reviews.llvm.org/D63585
llvm-svn: 363989
Currently, many profiling tests on Solaris FAIL like
Command Output (stderr):
--
Undefined first referenced
symbol in file
__llvm_profile_register_names_function /tmp/lit_tmp_Nqu4eh/infinite_loop-9dc638.o
__llvm_profile_register_function /tmp/lit_tmp_Nqu4eh/infinite_loop-9dc638.o
Solaris 11.4 ld supports the non-standard GNU ld extension of adding
__start_SECNAME and __stop_SECNAME labels to sections whose names are valid
as C identifiers. Given that we already use Solaris 11.4-only features
like ld -z gnu-version-script-compat and fully working .preinit_array
support in compiler-rt, we don't need to worry about older versions of
Solaris ld.
The patch documents that support (although the comment in
lib/Transforms/Instrumentation/InstrProfiling.cpp
(needsRuntimeRegistrationOfSectionRange) is quite cryptic what it's
actually about), and adapts the affected testcase not to expect the
alternativeq __llvm_profile_register_functions and __llvm_profile_init.
It fixes all affected tests.
Tested on amd64-pc-solaris2.11.
Differential Revision: https://reviews.llvm.org/D41111
llvm-svn: 363984
Summary:
The getClobberingMemoryAccess API checks for clobbering accesses in a loop by walking the backedge. This may check if a memory access is being
clobbered by the loop in a previous iteration, depending how smart AA got over the course of the updates in MemorySSA (it does not occur when built from scratch).
If no clobbering access is found inside the loop, it will optimize to an access outside the loop. This however does not mean that access is safe to sink.
Given:
```
for i
load a[i]
store a[i]
```
The access corresponding to the load can be optimized to outside the loop, and the load can be hoisted. But it is incorrect to sink it.
In order to sink the load, we'd need to check no Def clobbers the Use in the same iteration. With this patch we currently restrict sinking to either
Defs not existing in the loop, or Defs preceding the load in the same block. An easy extension is to ensure the load (Use) post-dominates all Defs.
Caught by PR42294.
This issue also shed light on the converse problem: hoisting stores in this same scenario would be illegal. With this patch we restrict
hoisting of stores to the case when their corresponding Defs are dominating all Uses in the loop.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63582
llvm-svn: 363982
This fixes CodeGen/available-externally-suppress.c when the new pass manager is
turned on by default. available_externally was not emitted during -O2 -flto
runs when it should still be retained for link time inlining purposes. This can
be fixed by checking that we aren't LTOPrelinking when adding the
EliminateAvailableExternallyPass.
Differential Revision: https://reviews.llvm.org/D63580
llvm-svn: 363971
I can't actually come up with a test case this triggers on without an out of tree change, but in theory, it's a bug in the recently added multiple exit LFTR support. The root issue is that an exiting block common to two loops can (in theory) have computable exit counts for both loops. Rewriting the exit of an inner loop in terms of the outer loops IV would cause the inner loop to either a) run forever, or b) terminate on the first iteration.
In practice, we appear to get lucky and not have the exit count computable for the outer loop, except when it's trivially zero. Given we bail on zero exit counts, we don't appear to ever trigger this. But I can't come up with a reason we *can't* compute an exit count for the outer loop on the common exiting block, so this may very well be triggering in some cases.
llvm-svn: 363964
Summary:
BLSI sets the C flag is the input is not zero. So if its followed
by a TEST of the input where only the Z flag is consumed, we can
replace it with the opposite check of the C flag.
We should be able to do the same for BLSMSK and BLSR, but the
naive test case for those is being optimized to a subo by
CodeGenPrepare.
Reviewers: spatel, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63589
llvm-svn: 363957
The form that compares against 0 is better because:
1. It removes a use of the input value.
2. It's the more standard form for this pattern: https://graphics.stanford.edu/~seander/bithacks.html#DetermineIfPowerOf2
3. It results in equal or better codegen (tested with x86, AArch64, ARM, PowerPC, MIPS).
This is a root cause for PR42314, but probably doesn't completely answer the codegen request:
https://bugs.llvm.org/show_bug.cgi?id=42314
Alive proof:
https://rise4fun.com/Alive/9kG
Name: is power-of-2
%neg = sub i32 0, %x
%a = and i32 %neg, %x
%r = icmp eq i32 %a, %x
=>
%dec = add i32 %x, -1
%a2 = and i32 %dec, %x
%r = icmp eq i32 %a2, 0
Name: is not power-of-2
%neg = sub i32 0, %x
%a = and i32 %neg, %x
%r = icmp ne i32 %a, %x
=>
%dec = add i32 %x, -1
%a2 = and i32 %dec, %x
%r = icmp ne i32 %a2, 0
llvm-svn: 363956
The attribute can specify elimination for leaf or non-leaf, so it
should always be considered. I copied this bug from AArch64, which
probably should also be fixed.
llvm-svn: 363949
This includes integer arithmetic of various kinds (add/sub/multiply,
saturating and not), and the immediate forms of VMOV and VMVN that
load an immediate into all lanes of a vector.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62674
llvm-svn: 363936
We tend to only test for scalar/scalar consts when really we could support non-uniform vectors using ISD::matchUnaryPredicate/matchBinaryPredicate etc.
llvm-svn: 363924
The caller of this is looking for comparisons of the input
to these instructions with 0. But the memory instructions
input is an addess not a value input in a register.
llvm-svn: 363907
Introducing VCC defs during SIFixSGPRCopies is generally
problematic. Avoid it by starting with the VOP3 form with the general
condition register. This is the easiest to fix instance, but doesn't
solve any specific problems I'm looking at.
llvm-svn: 363904
The ARMDisassembler changes allow changing between ARM and Thumb mode
based on the MCSubtargetInfo, rather than the Target, which simplifies
the other changes a bit.
I'm not really happy with adding more target-specific logic to
tools/llvm-objdump/, but there isn't any easy way around it: the logic
in question specifically applies to disassembling an object file, and
that code simply isn't located in lib/Target, at least at the moment.
Differential Revision: https://reviews.llvm.org/D60927
llvm-svn: 363903
This is incomplete, and ideally these would all be removed, but it's
better to localize them to the subtarget first with comments about
what they're for.
llvm-svn: 363902
Summary:
Stop referring to "numeric expression", using simply the term
"expression" instead. Likewise for numeric operation since operations
are only used in numeric expressions.
Reviewers: jhenderson, jdenny, probinson, arichardson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63500
llvm-svn: 363901
Summary:
Make use of Error and Expected to bubble up diagnostics and force
checking of errors in the callers.
Reviewers: jhenderson, jdenny, probinson, arichardson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63125
llvm-svn: 363900
Use getAPIntValue() in a few more places. Most of the time getZExtValue() is fine, but occasionally there's fuzzed code or someone decides to create i65536 or something.....
llvm-svn: 363887
Teach IndVarSimply's LinearFunctionTestReplace transform to handle multiple exit loops. LFTR does two key things 1) it rewrites (all) exit tests in terms of a common IV potentially eliminating one in the process and 2) it moves any offset/indexing/f(i) style logic out of the loop.
This turns out to actually be pretty easy to implement. SCEV already has all the information we need to know what the backedge taken count is for each individual exit. (We use that when computing the BE taken count for the loop as a whole.) We basically just need to iterate through the exiting blocks and apply the existing logic with the exit specific BE taken count. (The previously landed NFC makes this super obvious.)
I chose to go ahead and apply this to all loop exits instead of only latch exits as originally proposed. After reviewing other passes, the only case I could find where LFTR form was harmful was LoopPredication. I've fixed the latch case, and guards aren't LFTRed anyways. We'll have some more work to do on the way towards widenable_conditions, but that's easily deferred.
I do want to note that I added one bit after the review. When running tests, I saw a new failure (no idea why didn't see previously) which pointed out LFTR can rewrite a constant condition back to a loop varying one. This was theoretically possible with a single exit, but the zero case covered it in practice. With multiple exits, we saw this happening in practice for the eliminate-comparison.ll test case because we'd compute a ExitCount for one of the exits which was guaranteed to never actually be reached. Since LFTR ran after simplifyAndExtend, we'd immediately turn around and undo the simplication work we'd just done. The solution seemed obvious, so I didn't bother with another round of review.
Differential Revision: https://reviews.llvm.org/D62625
llvm-svn: 363883
Summary:
This is unfortunately needed for correctness, if we are to extend the tolerance of the update API to the way simple loop unswitch is doing cloning.
In simple loop unswitch (as opposed to loop unswitch), not all blocks are cloned. This can create unreachable cloned blocks (no predecessor), which are later cleaned up.
In MemorySSA, the APIs for supporting these kind of updates (clone + update exit blocks), make certain assumption on the integrity of the CFG. When cloning, if something was not cloned, it's values in MemorySSA default to LiveOnEntry. When updating exit blocks, it is safe to assume that we can first insert phis in the blocks merging two clones, then add additional phis in the IDF of the blocks that received phis. This no longer holds true if one of the clones being merged comes from an unreachable block. We'd conservatively need to add all phis before filling in their incoming definitions. In practice this restriction can be relaxed if we clean up trivial phis after the first round of insertion.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63354
llvm-svn: 363880
Summary:
When computing IDF for insert updates, ensure we use the snapshot CFG offered by GraphDiff.
Caught by D63389.
Reviewers: kuhar, george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits, Szelethus
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63443
llvm-svn: 363879
The def instruction for the vreg may not match, because it may be
folding through a reg_sequence. The assert was overly conservative and
not necessary. It's not actually important if DefMI really defined the
register, because the fold that will be done cares about the def of
the value that will be folded.
For some reason copies aren't making it through the reg_sequence,
although they should.
llvm-svn: 363876
(Recommit of r363293 which was reverted when a dependent patch was.)
As pointed out by Nikita in D62625, BackedgeTakenCount is generally used to refer to the backedge taken count of the loop. A conditional backedge taken count - one which only applies if a particular exit is taken - is called a ExitCount in SCEV code, so be consistent here.
llvm-svn: 363875
Turns out that we can save an instruction by folding the right shift into
the compare.
Differential Revision: https://reviews.llvm.org/D63568
llvm-svn: 363874
This reapplies r363678, using the correct chain for the CopyToReg for
v0. glueCopyToM0 counterintuitively changes the operands of the
original node.
llvm-svn: 363870
This is an exception to the rule that we should prefer xmm ops to ymm ops.
As shown in PR42305:
https://bugs.llvm.org/show_bug.cgi?id=42305
...the store folding opportunity with vextractf128 may result in better
perf by reducing the instruction count.
Differential Revision: https://reviews.llvm.org/D63517
llvm-svn: 363853
We already do this for ZERO_EXTEND/ZERO_EXTEND_VECTOR_INREG - this just extends the pattern matcher to recognize cases where we don't need the zeros in the extension.
llvm-svn: 363841
This includes all the obvious bitwise operations (AND, OR, BIC, ORN,
MVN) in register-to-register forms, and the immediate forms of
AND/OR/BIC/ORN; byte-order reverse instructions; and the VMOVs that
access a single lane of a vector.
Some of those VMOVs (specifically, the ones that access a 32-bit lane)
share an encoding with existing instructions that were disassembled as
accessing half of a d-register (e.g. `vmov.32 r0, d1[0]`), but in
8.1-M they're now written as accessing a quarter of a q-register (e.g.
`vmov.32 r0, q0[2]`). The older syntax is still accepted by the
assembler.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62673
llvm-svn: 363838
Summary:
This patch teaches ConstantFolding to constant fold
both scalar and vector variants of llvm.smul.fix and
llvm.smul.fix.sat.
As described in the LangRef rounding is unspecified for
these instrinsics. If the result cannot be represented
exactly the default behavior in ConstantFolding is to
round down towards negative infinity. If a target has a
preferred rounding that is different some kind of target
hook would be needed (same strategy as used by the
SelectionDAG legalizer).
Reviewers: nikic, leonardchan, RKSimon
Reviewed By: leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63385
llvm-svn: 363811
This patch splits ConstantFoldScalarCall into several
functions.
Benefits:
- Reduces indentation levels and avoids long if-statements.
- Makes it easier to add support for > 3 operands.
llvm-svn: 363810
Vector load/store instructions support an optional alignment field
that the compiler can use to provide known alignment info to the
hardware. If the field is used (and the information is correct),
the hardware may be able (on some models) to perform faster memory
accesses than otherwise.
This patch adds support for alignment hints in the assembler and
disassembler, and fills in known alignment during codegen.
llvm-svn: 363806
The test only checks the existence of the `Types CU list` line.
Unfortunately I can't make a better test because
{gcc,clang} -fuse-ld={lld,gold} --gdb-index do not give me a non-empty types CU list.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D63537
llvm-svn: 363800
Use matchBinaryPredicate instead of isConstOrConstSplat to let us handle non-uniform shift cases.
This requires us to tweak matchBinaryPredicate to allow it to (optionally) handle constants with different type widths.
llvm-svn: 363792
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
I have set up a separate review D61933 for a fix which is required for this patch.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel, jmorse
Reviewed By: hfinkel, jmorse
Subscribers: jmorse, javed.absar, eraman, kcc, bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
> llvm-svn: 363046
llvm-svn: 363786
Summary:
The test case does an (out of bounds) load from a global constant with
type <3 x float>. InstSimplify tried to turn this into an integer load
of the whole alloc size of the vector, which is 128 bits due to
alignment padding, and then bitcast this to <3 x vector> which failed
an assertion due to the type size mismatch.
The fix is to do an integer load of the normal size of the vector, with
no alignment padding.
Reviewers: tpr, arsenm, majnemer, dstuttard
Reviewed By: arsenm
Subscribers: hfinkel, wdng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63375
llvm-svn: 363784
This patch allows immediates (and CSR alias immediates) which start with
a tilde token or an exclaim (!) token to be parsed as intended.
Differential Revision: https://reviews.llvm.org/D57320
llvm-svn: 363783
Since the parser attempts to parse an operand as a register with
parentheses before parsing it as an immediate, immediates in
parentheses should not be parsed by parseRegister. However in the case
where the immediate does not start with an identifier, the LParen is not
unlexed and so the RParen causes an unexpected token error.
This patch adds the missing UnLex, and modifies the existing UnLex to
not use a buffered token, as it should always be unlexing an LParen.
Differential Revision: https://reviews.llvm.org/D57319
llvm-svn: 363782
Summary:
llvm.x86.sse.stmxcsr only writes to memory.
llvm.x86.sse.ldmxcsr only reads from memory, and might generate an FPE.
Reviewers: craig.topper, RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62896
llvm-svn: 363773
This patch adds lowering for global TLS addresses for the TLS models of
InitialExec, GlobalDynamic, LocalExec and LocalDynamic.
LocalExec support required using a 4-operand add instruction, which uses
the fourth operand to express a relocation on the symbol. The necessary
fixup is emitted when the instruction is emitted.
Differential Revision: https://reviews.llvm.org/D55305
llvm-svn: 363771
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
llvm-svn: 363757
Summary:
Converting the result *.{all,any}_true to a bool at the source level
generates LLVM IR that compares the result to 0. This check is
redundant since these instructions already return either 0 or 1 and
therefore conform to the BooleanContents setting for WebAssembly. This
CL adds patterns to detect and remove such redundant operations on the
result of Boolean reductions.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63529
llvm-svn: 363756
[SROA] Enhance SROA to handle `addrspacecast`ed allocas
- Fix typo in original change
- Add additional handling to ensure all return pointers are properly
casted.
Summary:
- After `addrspacecast` is allowed to be eliminated in SROA, the
adjusting of storage pointer (from `alloca) needs to handle the
potential different address spaces between the storage pointer (from
alloca) and the pointer being used.
Reviewers: arsenm
Subscribers: wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63501
llvm-svn: 363743
Summary:
When identifing instructions that can be folded into a MOVCC instruction,
checking for a predicate operand is not enough, also need to check for
thumb2 function, with restrict-IT, is the machine instruction eligible for
ARMv8 IT or not.
Notes in ARMv8-A Architecture Reference Manual, section "Partial deprecation of IT"
https://usermanual.wiki/Pdf/ARM20Architecture20Reference20ManualARMv8.1667877052.pdf
"ARMv8-A deprecates some uses of the T32 IT instruction. All uses of IT that apply to
instructions other than a single subsequent 16-bit instruction from a restricted set
are deprecated, as are explicit references to the PC within that single 16-bit
instruction. This permits the non-deprecated forms of IT and subsequent instructions
to be treated as a single 32-bit conditional instruction."
Reviewers: efriedma, lebedev.ri, t.p.northover, jmolloy, aemerson, compnerd, stoklund, ostannard
Reviewed By: ostannard
Subscribers: ostannard, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63474
llvm-svn: 363739
Summary:
DAGCombine will normally turn a `(shl (add x, c1), c2)` into `(add (shl x, c2), c1 << c2)`, where `c1` and `c2` are constants. This can be prevented by a callback in TargetLowering.
On RISC-V, materialising the constant `c1 << c2` can be more expensive than materialising `c1`, because materialising the former may take more instructions, and may use a register, where materialising the latter would not.
This patch implements the hook in RISCVTargetLowering to prevent this transform, in the cases where:
- `c1` fits into the immediate field in an `addi` instruction.
- `c1` takes fewer instructions to materialise than `c1 << c2`.
In future, DAGCombine could do the check to see whether `c1` fits into an add immediate, which might simplify more targets hooks than just RISC-V.
Reviewers: asb, luismarques, efriedma
Reviewed By: asb
Subscribers: xbolva00, lebedev.ri, craig.topper, lewis-revill, Jim, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62857
llvm-svn: 363736
This patch teaches the Verifier how to detect broken !llvm.loop
attachments as discussed in https://reviews.llvm.org/D60831. This
allows LLVM to warn and strip out the broken debug info before
attempting an LTO compilation with input generated by LLVM predating
https://reviews.llvm.org/rL361149.
rdar://problem/51631158
Differential Revision: https://reviews.llvm.org/D63499
[Re-applies r363725 without changes after fixing a broken testcase.]
llvm-svn: 363731
Summary:
CoroSplit depends on CallGraphWrapperPass, but it was not explicitly adding it as a pass dependency.
This missing dependency can trigger errors / assertions / crashes in PMTopLevelManager::schedulePass() under certain configurations.
Author: ben-clayton
Reviewers: GorNishanov
Reviewed By: GorNishanov
Subscribers: capn, EricWF, modocache, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63144
llvm-svn: 363727
This patch teaches the Verifier how to detect broken !llvm.loop
attachments as discussed in https://reviews.llvm.org/D60831. This
allows LLVM to warn and strip out the broken debug info before
attempting an LTO compilation with input generated by LLVM predating
https://reviews.llvm.org/rL361149.
rdar://problem/51631158
Differential Revision: https://reviews.llvm.org/D63499
llvm-svn: 363725
FP_ROUND defaults to Legal for all MVT types and nothing changes
the v4f32 entry way from this default. If we needed this line
we'd also need one for v8f32 with AVX512 which we don't have.
llvm-svn: 363719
Other than adding consistent demanded elts handling which was a trivial addition, the other differences in functionality will be added in later patches.
llvm-svn: 363713
Summary:
- After `addrspacecast` is allowed to be eliminated in SROA, the
adjusting of storage pointer (from `alloca) needs to handle the
potential different address spaces between the storage pointer (from
alloca) and the pointer being used.
Reviewers: arsenm
Subscribers: wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63501
llvm-svn: 363711
Other than adding consistent demanded elts handling which was a trivial addition, the other differences in functionality will be added in later patches.
llvm-svn: 363710
Add `IsGP64bit` and `IsPTR64bit` to the list of `UnsupportedFeatures`
of the P5600 scheduling definitions. Also mark some MIPS 64-bit
instructions by PTR_64 and GPR_64 predicates. This reduces number
of "No schedule information for" and "lacks information for" errors
in case of marking this scheduler model as complete.
This patch is one of a series of patches. The goal is to make P5600
scheduler model complete and turn on the `CompleteModel` flag.
Differential Revision: https://reviews.llvm.org/D63237
llvm-svn: 363702
Set the hasNoSchedulingInfo flag for the`MipsAsmPseudoInst`. These
pseudo-instructions are never used by codegen. This flag allows to
reduce number of "No schedule information for" and "lacks information
for" errors in case of marking a scheduler model as complete.
This patch is one of a series of patches. The goal is to make P5600
scheduler model complete and turn on the `CompleteModel` flag.
Differential Revision: https://reviews.llvm.org/D63236
llvm-svn: 363701
This includes saturating and non-saturating shifts, both with
immediate shift count and with the shift counts given by another
vector register; VSHLC (in which the bits shifted out of each active
vector lane are shifted in to the next active lane); and also VMOVL,
which is enough like an immediate shift that it didn't fit too badly
in this category.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62672
llvm-svn: 363696
Summary:
These form a small family of their own, to go with the floating-point
VMINNM/VMAXNM instructions added in a previous commit.
They introduce the first of many special cases in the mnemonic
recognition code, because VMIN with the E suffix used by the VPT
predication system needs to avoid being interpreted as the nonexistent
instruction 'VMI' with an ordinary 'NE' condition suffix.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62671
llvm-svn: 363695
Part of fixing the X86 regression noted in D63281 - I've split this into X86 and generic parts - the generic commit will be coming shortly and will fix the vector-reduce-mul-widen.ll regression introduced here.
llvm-svn: 363693
Summary:
Their names began with a mishmash of `MVE_`, `t2` and no prefix at
all. Now they all start with `MVE_`, which seems like a reasonable
choice on the grounds that (a) NEON is the thing they're most at risk
of being confused with, and (b) MVE implies Thumb-2, so a prefix
indicating MVE is strictly more specific than one indicating Thumb-2.
Reviewers: ostannard, SjoerdMeijer, dmgreen
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63492
llvm-svn: 363690
This patch adds support for generating calls through the procedure
linkage table where required for a given ExternalSymbol or GlobalAddress
callee.
Differential Revision: https://reviews.llvm.org/D55304
llvm-svn: 363686
Invert the name and return value to better reflect the imprecise
nature.
Force passing in the DefMI, since it's known in the 2 users and could
possibly fail for an arbitrary vreg.
Allow specifying a specific user instruction. Scan through use
instructions, instead of use operands. Add scan thresholds instead of
searching infinitely.
Stop using a set to track seen uses. I didn't understand this usage,
or why it would not check the last use. I don't think the use list has
any particular order.
llvm-svn: 363675
This adds vector splitting for vaarg instructions during type legalization
Committed on behalf of @luke (Luke Lau)
Differential Revision: https://reviews.llvm.org/D60762
llvm-svn: 363671
Some more refactoring, like registering the IT Block pass, less cryptic
variable names, and some simplification of loops.
Differential Revision: https://reviews.llvm.org/D63419
llvm-svn: 363666
Recommit of D32530 with a few small changes:
- Stopped recursively walking through aggregates in
the verifier, so that we don't impose too much
overhead on large modules under LTO (see PR42210).
- Changed tests to match; the errors are slightly
different since they only report the array or
struct that actually contains a scalable vector,
rather than all aggregates which contain one in
a nested member.
- Corrected an older comment
Reviewers: thakis, rengolin, sdesmalen
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D63321
llvm-svn: 363658
First step toward addressing the vector-reduce-mul-widen.ll regression in D63281 - we should replace ANY_EXTEND/ANY_EXTEND_VECTOR_INREG in X86ISelDAGToDAG to avoid having to add duplicate patterns when treating any extensions as legal.
In future patches this will also allow us to keep any extension nodes around a lot longer in the DAG, which should mean that we can keep better track of undef elements that otherwise become zeros that we think we have to keep......
Differential Revision: https://reviews.llvm.org/D63326
llvm-svn: 363655
Using the new SwitchInstProfUpdateWrapper this patch
simplifies 3 places of prof branch_weights handling.
Differential Revision: https://reviews.llvm.org/D62123
llvm-svn: 363652
The isel patterns for these use a bitcast and load/store, but
DAG combine should have canonicalized those away.
For the purposes of the memory folding table these opcodes can be
replaced by the MOVSSrm_alt/MOVSDrm_alt and MOVSSmr/MOVSDmr opcodes.
llvm-svn: 363644
Rename the old versions that use FR32/FR64 to MOVSSrm_alt/MOVSDrm_alt.
Use the new versions in patterns that previously used a COPY_TO_REGCLASS
to VR128. These patterns expect the upper bits to be zero. The
current set up appears to work, but I'm not sure we should be
enforcing upper bits being zero through a COPY_TO_REGCLASS.
I wanted to flip the arrangement and use a COPY_TO_REGCLASS to
FR32/FR64 for the patterns that need an f32/f64 result, but that
complicated fastisel and globalisel.
I've been doing some experiments with reducing some isel patterns
and ended up in a situation where I had a
(SUBREG_TO_REG (COPY_TO_RECLASS (VMOVSSrm), VR128)) and our
post-isel peephole was unable to avoid using an instruction for
the SUBREG_TO_REG due to the COPY_TO_REGCLASS. Having a VR128
instruction removes the COPY_TO_REGCLASS that was breaking this.
llvm-svn: 363643
Summary:
All the GlobalISel passes are initialized when the target calls
initializeGlobalISel(), so we don't need to call the initializers
from the pass constructors.
Reviewers: qcolombet, t.p.northover, paquette, dsanders, aemerson, aditya_nandakumar
Reviewed By: aemerson
Subscribers: rovka, kristof.beyls, hiraditya, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63235
llvm-svn: 363642
This was ignoring the flag on fneg, and using the source instruction's
flags. Also fixes tests missing from r358702.
Note the expansion itself isn't correct without nnan, but that should
be fixed separately.
llvm-svn: 363637
This saves roughly 32 bytes of instructions per function with stack objects
and causes us to preserve enough information that we can recover the original
tags of all stack variables.
Now that stack tags are deterministic, we no longer need to pass
-hwasan-generate-tags-with-calls during check-hwasan. This also means that
the new stack tag generation mechanism is exercised by check-hwasan.
Differential Revision: https://reviews.llvm.org/D63360
llvm-svn: 363636
The goal is to improve hwasan's error reporting for stack use-after-return by
recording enough information to allow the specific variable that was accessed
to be identified based on the pointer's tag. Currently we record the PC and
lower bits of SP for each stack frame we create (which will eventually be
enough to derive the base tag used by the stack frame) but that's not enough
to determine the specific tag for each variable, which is the stack frame's
base tag XOR a value (the "tag offset") that is unique for each variable in
a function.
In IR, the tag offset is most naturally represented as part of a location
expression on the llvm.dbg.declare instruction. However, the presence of the
tag offset in the variable's actual location expression is likely to confuse
debuggers which won't know about tag offsets, and moreover the tag offset
is not required for a debugger to determine the location of the variable on
the stack, so at the DWARF level it is represented as an attribute so that
it will be ignored by debuggers that don't know about it.
Differential Revision: https://reviews.llvm.org/D63119
llvm-svn: 363635
Inter-block localization is the same as what currently happens, except now it
only runs on the entry block because that's where the problematic constants with
long live ranges come from.
The second phase is a new intra-block localization phase which attempts to
re-sink the already localized instructions further right before one of the
multiple uses.
One additional change is to also localize G_GLOBAL_VALUE as they're constants
too. However, on some targets like arm64 it takes multiple instructions to
materialize the value, so some additional heuristics with a TTI hook have been
introduced attempt to prevent code size regressions when localizing these.
Overall, these changes improve CTMark code size on arm64 by 1.2%.
Full code size results:
Program baseline new diff
------------------------------------------------------------------------------
test-suite...-typeset/consumer-typeset.test 1249984 1217216 -2.6%
test-suite...:: CTMark/ClamAV/clamscan.test 1264928 1232152 -2.6%
test-suite :: CTMark/SPASS/SPASS.test 1394092 1361316 -2.4%
test-suite...Mark/mafft/pairlocalalign.test 731320 714928 -2.2%
test-suite :: CTMark/lencod/lencod.test 1340592 1324200 -1.2%
test-suite :: CTMark/kimwitu++/kc.test 3853512 3820420 -0.9%
test-suite :: CTMark/Bullet/bullet.test 3406036 3389652 -0.5%
test-suite...ark/tramp3d-v4/tramp3d-v4.test 8017000 8016992 -0.0%
test-suite...TMark/7zip/7zip-benchmark.test 2856588 2856588 0.0%
test-suite...:: CTMark/sqlite3/sqlite3.test 765704 765704 0.0%
Geomean difference -1.2%
Differential Revision: https://reviews.llvm.org/D63303
llvm-svn: 363632
Summary: This case is related to D63405 in that we need to be propagating FMF on negates.
Reviewers: volkan, spatel, arsenm
Reviewed By: arsenm
Subscribers: wdng, javed.absar
Differential Revision: https://reviews.llvm.org/D63458
llvm-svn: 363631
This is part of the approved D63204 pending parent revision.
This small change is in fact a part of the VOP2b legalization which
does not technically belong to wave32 support, so extracted
separately.
llvm-svn: 363625
This patch really contains two pieces:
Teach SCEV how to fold a phi in the header of a loop to the value on the backedge when a) the backedge is known to execute at least once, and b) the value is safe to use globally within the scope dominated by the original phi.
Teach IndVarSimplify's rewriteLoopExitValues to allow loop invariant expressions which already exist (and thus don't need new computation inserted) even in loops where we can't optimize away other uses.
Differential Revision: https://reviews.llvm.org/D63224
llvm-svn: 363619
Summary:
Change the way we deal with iterator invalidation in the extload combines as it
was still possible to neglect to visit a use. Even worse, it happened in the
in-tree test cases and the checks weren't good enough to detect it.
We now take a cheap copy of the use list before iterating over it. This
prevents iterator invalidation from occurring and has the nice side effect
of making the existing schedule-for-erase/schedule-for-insert mechanism
moot.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, javed.absar, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61813
llvm-svn: 363616
AMDGPUPropagateAttributes will not work on function bitcatsts,
so move AMDGPUFixFunctionBitcasts before it.
Differential Revision: https://reviews.llvm.org/D63455
llvm-svn: 363614
Recommit r363289 with a bug fix for crash identified in pr42279. Issue was that a loop exit test does not have to be an icmp, leading to a null dereference crash when new logic was exercised for that case. Test case previously committed in r363601.
Original commit comment follows:
This contains fixes for two cases where we might invalidate inbounds and leave it stale in the IR (a miscompile). Case 1 is when switching to an IV with no dynamically live uses, and case 2 is when doing pre-to-post conversion on the same pointer type IV.
The basic scheme used is to prove that using the given IV (pre or post increment forms) would have to already trigger UB on the path to the test we're modifying. As such, our potential UB triggering use does not change the semantics of the original program.
As was pointed out in the review thread by Nikita, this is defending against a separate issue from the hasConcreteDef case. This is about poison, that's about undef. Unfortunately, the two are different, see Nikita's comment for a fuller explanation, he explains it well.
(Note: I'm going to address Nikita's last style comment in a separate commit just to minimize chance of subtle bugs being introduced due to typos.)
Differential Revision: https://reviews.llvm.org/D62939
llvm-svn: 363613
Summary:
The purpose of the padding is to guard against stale code being
fetched into the instruction cache by the lowest level prefetching.
We're generating relocatable ELF here, and so the padding should
arguably be added by the linker. This is in fact what Mesa does.
This also fixes multi-part shaders for Mesa.
Change-Id: I6bfede58f20e9f337762ccf39ef9e0e263e69e82
Reviewers: arsenm, rampitec, t-tye
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63427
llvm-svn: 363602
Summary:
Update compare normalization in SimpleValue hashing to break ties (when
the same value is being compared to itself) by switching to the swapped
predicate if it has a lower numerical value. This brings the hashing in
line with isEqual, which already recognizes the self-compares with
swapped predicates as equal.
Fixes PR 42280.
Reviewers: spatel, efriedma, nikic, fhahn, uabelho
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63349
llvm-svn: 363598
Summary:
LoopRotate doesn't create a faithful clone of an instruction, it may
simplify it beforehand. Hence the clone of an instruction that has a
MemoryDef associated may not be a definition, but a use or not a memory
alternig instruction.
Don't rely on the template when the clone may be simplified.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63355
llvm-svn: 363597
Basically porting over the behaviour in AArch64ISelLowering to GISel. See
emitComparison for reference.
When we have something like this:
```
lhs = G_SUB 0, y
...
G_ICMP lhs, rhs
```
We can fold away the G_SUB and produce a cmn instead, given that we produce
the same value in NZCV.
Add a test showing that the transformation works, and also showing that we
don't perform the transformation when it's unsafe.
Also factor out the CSet emission into emitCSetForICMP.
Differential Revision: https://reviews.llvm.org/D63163
llvm-svn: 363596
We don't know if its safe to unfold if we're in 32-bit mode.
This is simlar to what was done to some load opcodes in r363523.
I think its pretty unlikely we will try to unfold these anyway so
I don't think this is testable.
llvm-svn: 363595
If a XMM non-temporal store has less than natural alignment, scalarize the vector - with SSE4A we can stay on the vector and use MOVNTSD(f64), else we must move to GPRs and use MOVNTI(i32/i64).
llvm-svn: 363592
Summary:
Add all MemoryPhis in IDF before filling in their incomign values.
Otherwise, a new Phi can be added that needs to become the incoming
value of another Phi.
Test fails the verification in verifyPrevDefInPhis.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63353
llvm-svn: 363590
The pass works in two modes:
Mode 1: Just set attributes starting from kernels. This can work at
the very beginning of opt and llc pipeline, but cannot clone functions
because it must be a function pass.
Mode 2: Actually clone functions for new attributes. This can only work
after all function passes in the opt pipeline because it has to be a
module pass.
Differential Revision: https://reviews.llvm.org/D63208
llvm-svn: 363586
If a YMM/ZMM non-temporal store has less than natural alignment, split the vector - either they will be satisfactorily aligned or will continue to be split until they are XMMs - at which point the legalizer will scalarize it.
llvm-svn: 363582
When considering a loop containing nontemporal stores or loads for
vectorization, suppress the vectorization if the corresponding
vectorized store or load with the aligment of the original scaler
memory op is not supported with the nontemporal hint on the target.
This adds two new functions:
bool isLegalNTStore(Type *DataType, unsigned Alignment) const;
bool isLegalNTLoad(Type *DataType, unsigned Alignment) const;
to TTI, leaving the target independent default implementation as
returning true, but with overriding implementations for X86 that
check the legality based on available Subtarget features.
This fixes https://llvm.org/PR40759
Differential Revision: https://reviews.llvm.org/D61764
llvm-svn: 363581
A target intrinsic may be defined as possibly reading memory, but the
call site may have additional knowledge that it doesn't read
memory. The intrinsic lowering will expect the pessimistic assumption
of the intrinsic definition, so the chain should still be used.
I fixed the same bug in SelectionDAG in r287593.
llvm-svn: 363580
I keep using the wrong instruction when manually writing tests. This
really needs to check the number of operands, but I don't see an easy
way to do that right now.
llvm-svn: 363579
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
llvm-svn: 363573
This is currently only used for ymm->xmm splitting but we shouldn't hardcode the offsets/alignment.
This is necessary for an upcoming patch to split under-aligned non-temporal vector loads.
llvm-svn: 363570
Summary:
There is PHINode::getBasicBlockIndex() and PHINode::setIncomingValue()
but no function to replace incoming value for a specified BasicBlock*
predecessor.
Clearly, there are a lot of places that could use that functionality.
Reviewer: craig.topper, lebedev.ri, Meinersbur, kbarton, fhahn
Reviewed By: Meinersbur, fhahn
Subscribers: fhahn, hiraditya, zzheng, jsji, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63338
llvm-svn: 363566
For loads, pre-SSE41 we can't perform NT loads at all, and after that we can only perform vector aligned loads, so if the alignment is less than for a xmm we'll just end up using the regular unaligned vector loads anyway.
First step towards fixing PR42026 - the next step for stores will be to use SSE4A movntsd where possible and to avoid the stack spill on SSE2 targets.
Differential Revision: https://reviews.llvm.org/D63246
llvm-svn: 363564
If an addrspacecast needed to be inserted again, this was creating a
clone of the original cast for each user. Just use the original, which
also saves losing the value name.
llvm-svn: 363562
The HardwareLoops pass finds exit blocks with a scevable exit count.
If the target specifies to update the loop counter in a register,
through a phi, we need to ensure that the exit block is a latch so
that we can insert the phi with the correct value for the incoming
edge.
Differential Revision: https://reviews.llvm.org/D63336
llvm-svn: 363556
Summary:
Avoid that loop vectorizer creates loads/stores of vectors
with "irregular" types when interleaving. An example of
an irregular type is x86_fp80 that is 80 bits, but that
may have an allocation size that is 96 bits. So an array
of x86_fp80 is not bitcast compatible with a vector
of the same type.
Not sure if interleavedAccessCanBeWidened is the best
place for this check, but it solves the problem seen
in the added test case. And it is the same kind of check
that already exists in memoryInstructionCanBeWidened.
Reviewers: fhahn, Ayal, craig.topper
Reviewed By: fhahn
Subscribers: hiraditya, rkruppe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63386
llvm-svn: 363547
Some GEPs were not being split, presumably because that split would just be
undone by the DAGCombiner. Not performing those splits can prevent important
optimizations, such as preventing the element indices / member offsets from
being (partially) folded into load/store instruction immediates. This patch:
- Makes the splits also occur in the cases where the base address and the GEP
are in the same BB.
- Ensures that the DAGCombiner doesn't reassociate them back again.
Differential Revision: https://reviews.llvm.org/D60294
llvm-svn: 363544
This is already done in DAGCombiner::visitINSERT_SUBVECTOR, but this helps a number of shuffles across different vector widths recognise when they come from the same source.
llvm-svn: 363542
Second functional change following on from rL362687. Pass the
NoWrapFlags from the MulExpr to InsertBinop when we're generating a
shl or mul.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363540
This patch changes MIR stack-id from an integer to an enum,
and adds printing/parsing support for this in MIR files. The default
stack-id '0' is now renamed to 'default'.
This should make MIR tests that have stack objects with different stack-ids
more descriptive. It also clarifies code operating on StackID.
Reviewers: arsenm, thegameg, qcolombet
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60137
llvm-svn: 363533
Create the ARMBasicBlockUtils class for tracking and querying basic
blocks sizes so we can use them when generating low-overhead loops.
Differential Revision: https://reviews.llvm.org/D63265
llvm-svn: 363530
Third time's the charm.
This was reverted in r363220 due to being suspected of an internal benchmark
regression and a test failure, none of which turned out to be caused by this.
llvm-svn: 363529
SimplifyCFG has a bug that results in inconsistent prof branch_weights metadata
if unreachable switch cases are removed. This patch fixes this bug by making use
of the newly introduced SwitchInstProfUpdateWrapper class (see patch D62122).
A new test is created.
Differential Revision: https://reviews.llvm.org/D62186
llvm-svn: 363527
Summary:
SPE passes doubles the same as soft-float, in register pairs as i32
types. This is all handled by the target-independent layer. However,
this is not optimal when splitting or reforming the doubles, as it
pushes to the stack and loads from, on either side.
For instance, to pass a double argument to a function, assuming the
double value is in r5, the sequence currently looks like this:
evstdd 5, X(1)
lwz 3, X(1)
lwz 4, X+4(1)
Likewise, to form a double into r5 from args in r3 and r4:
stw 3, X(1)
stw 4, X+4(1)
evldd 5, X(1)
This optimizes the fence to use SPE instructions. Now, to pass a double
to a function:
mr 4, 5
evmergehi 3, 5, 5
And to form a double into r5 from args in r3 and r4:
evmergelo 5, 3, 4
This is comparable to the way that gcc generates the double splits.
This also fixes a bug with expanding builtins to libcalls, where the
LowerCallTo() code path was generating intermediate illegal type nodes.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54583
llvm-svn: 363526
It would not be safe to unfold the memory form the register form
without checking that we are compiling for 64-bit mode.
This probaby isn't a real functional issue since we are unlikely
to unfold any of these instructions since they don't have any
tied registers, aren't commutable, and don't have any inputs
other than the address.
llvm-svn: 363523
Fix folds of addo and subo with an undef operand to be:
`@llvm.{u,s}{add,sub}.with.overflow` all fold to `{ undef, false }`,
as per LLVM undef rules.
Same for commuted variants.
Based on the original version of the patch by @nikic.
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=42209 | PR42209 ]]
Differential Revision: https://reviews.llvm.org/D63065
llvm-svn: 363522
Summary:
Instead of encoding a high-word of 0 using a fake TargetGlobalAddress,
just use a literal target constant. This simplifies some subsequent changes.
The generated assembly is now more explicit about the kind of relocation
that is to be used.
Change-Id: I066835202d23b5941fa7a358eb4b89e9b71ab6f8
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61491
llvm-svn: 363516
This is based on the example/discussion in PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428
Proper vector shift instructions don't appear until AVX2, so we may generate several
extra instructions within a loop trying to compensate for that. It's difficult to
recover from that shift expansion later than this, so use the existing TLI hook and
splat analysis to enable better codegen.
This extends CGP functionality introduced with:
rL201655
Differential Revision: https://reviews.llvm.org/D63233
llvm-svn: 363511
This is similar logic/motivation to the select splitting in D62969.
In D63233, the pattern changes so that we no longer have an extract_subvector of vselect,
but the operands of the select are still being concatenated.
The closest case is represented in either the first or last test diffs here - we have an
extra instruction, but we converted 3-4 ymm instructions into 4-5 xmm instructions.
I think that's the right trade-off for most AVX1 targets.
In the example based on PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428
...this makes the loop about 30% faster (tested on Haswell by compiling with -mavx).
Differential Revision: https://reviews.llvm.org/D63364
llvm-svn: 363508
Summary:
With Split DWARF the resulting object file (then called skeleton CU)
contains the file name of another ("DWO") file with the debug info.
This can be a problem for remote compilation, as it will contain the
name of the file on the compilation server, not on the client.
To use Split DWARF with remote compilation, one needs to either
* make sure only relative paths are used, and mirror the build directory
structure of the client on the server,
* inject the desired file name on the client directly.
Since llc already supports the latter solution, we're just copying that
over. We allow setting the actual output filename separately from the
value of the DW_AT_[GNU_]dwo_name attribute in the skeleton CU.
Fixes PR40276.
Reviewers: dblaikie, echristo, tejohnson
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D59673
llvm-svn: 363496
Summary:
If the nested loop is an innermost loop, prefer to a 32-byte alignment, so that
we can decrease cache misses and branch-prediction misses. Actual alignment of
the loop will depend on the hotness check and other logic in alignBlocks.
The old code will only align hot loop to 32 bytes when the LoopSize larger than
16 bytes and smaller than 32 bytes, this patch will align the innermost hot loop
to 32 bytes not only for the hot loop whose size is 16~32 bytes.
Reviewed By: steven.zhang, jsji
Differential Revision: https://reviews.llvm.org/D61228
llvm-svn: 363495
Summary:
When using ConstantExpr we often need the result of the expression to be kept in the AST. Currently this is done on a by the node that needs the result and has been done multiple times for enumerator, for constexpr variables... . This patch adds to ConstantExpr the ability to store the result of evaluating the expression. no functional changes expected.
Changes:
- Add trailling object to ConstantExpr that can hold an APValue or an uint64_t. the uint64_t is here because most ConstantExpr yield integral values so there is an optimized layout for integral values.
- Add basic* serialization support for the trailing result.
- Move conversion functions from an enum to a fltSemantics from clang::FloatingLiteral to llvm::APFloatBase. this change is to make it usable for serializing APValues.
- Add basic* Import support for the trailing result.
- ConstantExpr created in CheckConvertedConstantExpression now stores the result in the ConstantExpr Node.
- Adapt AST dump to print the result when present.
basic* : None, Indeterminate, Int, Float, FixedPoint, ComplexInt, ComplexFloat,
the result is not yet used anywhere but for -ast-dump.
Reviewers: rsmith, martong, shafik
Reviewed By: rsmith
Subscribers: rnkovacs, hiraditya, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62399
llvm-svn: 363493
Based on D59959, this switches SCEV to use unsigned/signed range
intersection based on the sign hint. This will prefer non-wrapping
ranges in the relevant domain. I've left the one intersection in
getRangeForAffineAR() to use the smallest intersection heuristic,
as there doesn't seem to be any obvious preference there.
Differential Revision: https://reviews.llvm.org/D60035
llvm-svn: 363490
If we can detect that saturating math that depends on an IV cannot
overflow, replace it with simple math. This is similar to the CVP
optimization from D62703, just based on a different underlying
analysis (SCEV vs LVI) that catches different cases.
Differential Revision: https://reviews.llvm.org/D62792
llvm-svn: 363489
This reverts rL363474. -debug-only=isel was added to some tests that
don't specify `REQUIRES: asserts`. This causes failures on
-DLLVM_ENABLE_ASSERTIONS=off builds.
I chose to revert instead of fixing the tests because I'm not sure
whether we should add `REQUIRES: asserts` to more tests.
llvm-svn: 363482
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
llvm-svn: 363471
with 'objc_arc_inert'
Those calls are no-ops, so they can be safely deleted.
rdar://problem/49839633
Differential Revision: https://reviews.llvm.org/D62433
llvm-svn: 363468
Currently you get extra waits, because waits are inserted for the
register dependencies of the call, and the function prolog waits on
everything.
Currently waits are still inserted on returns. It may make sense to
not do this, and wait in the caller instead.
llvm-svn: 363465
This patch allows clang users to print out a list of supported CPU models using
clang [--target=<target triple>] --print-supported-cpus
Then, users can select the CPU model to compile to using
clang --target=<triple> -mcpu=<model> a.c
It is a handy feature to help cross compilation.
llvm-svn: 363464
There is a circular dependency between SROA and InferAddressSpaces
today that requires running both multiple times in order to be able to
eliminate all simple allocas and addrspacecasts. InferAddressSpaces
can't remove addrspacecasts when written to memory, and SROA helps
move pointers out of memory.
This should avoid inserting new commuting addrspacecasts with GEPs,
since there are unresolved questions about pointer wrapping between
different address spaces.
For now, don't replace volatile operations that don't match the alloca
addrspace, as it would change the address space of the access. It may
be still OK to insert an addrspacecast from the new alloca, but be
more conservative for now.
llvm-svn: 363462
The way SelectionDAG treats memory operands is very frustrating, and
by default drops them unless a property is set on the pattern. There
is no pattern for manually selected instructions, so this requires
manually setting them.
llvm-svn: 363455
This is a branch opcode that takes a jump table pointer, jump table index and an
index into the table to do an indirect branch.
We pass both the table pointer and JTI to allow targets like ARM64 to more
easily use the existing jump table compression optimization without having to
walk up the block to find a paired G_JUMP_TABLE.
Differential Revision: https://reviews.llvm.org/D63159
llvm-svn: 363434
and replace with an equilivent countTrailingZeros.
GCD is much more expensive than this, with repeated division.
This depends on D60823
Differential Revision: https://reviews.llvm.org/D61151
llvm-svn: 363422
I recently discovered a bug on the x86 platform: The fp80 type was not handled well by x86 for constrained floating point nodes, as their regular counterparts are replaced by extending loads and truncating stores during the preprocess phase. Normally, platforms don't have this issue, as they don't typically attempt to perform such legalizations during instruction selection preprocessing. Before this change, strict_fp nodes survived until they were mutated to normal nodes, which happened shortly after preprocessing on other platforms. This modification lowers these nodes at the same phase while properly utilizing the chain.5
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Craig Topper, Kevin P. Neal
Approved by: Craig Topper
Differential Revision: https://reviews.llvm.org/D63271
llvm-svn: 363417
Earlier commit has added AMDGPUOperand::isBoolReg(). Turns out
gcc issues warning about unused function since D63204 is not
yet submitted.
Added NFC part of D63204 to have a use of that function and
mute the warning.
llvm-svn: 363416
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363415
Avoid producing illegal register bank copies for reg_sequence and
phi. The default implementation assumes it is possible to pick any
operand's bank and use that for the result, introducing a copy for
operands with a different bank. This does not check for illegal
copies. It is not legal to introduce a VGPR->SGPR copy, so any VGPR
operand requires the result to be a VGPR.
The changes in getInstrMappingImpl aren't strictly necessary, since
AMDGPU now just bypasses this for reg_sequence/phi. This could be
replaced with an assert in case other targets run into this. It is
currently responsible for producing the error for unsatisfiable
copies, but this will be better served with a verifier check.
For phis, for now assume any undetermined operands must be
VGPRs. Eventually, this needs to be able to defer mapping these
operations. This also does not yet have a way to check for whether the
block is in a divergent region.
llvm-svn: 363410
I'm not 100% sure about this, since I'm worried about IR transforms
that might end up introducing divergence downstream once replaced with
a constant, but I haven't come up with an example yet.
llvm-svn: 363406
This is the family of vector instructions that combine all the lanes
in their input vector(s), and output a value in one or two GPRs.
Differential Revision: https://reviews.llvm.org/D62670
llvm-svn: 363403
r363261 caused test failure on 32-bit ARM buildbot,
because of unsigned integer overflow. This patch
fixes it changing offset type from size_t to uint64_t.
llvm-svn: 363393
Avoid a check for valid and a set of redundant asserts. The place
InstructionMapping is constructed asserts all of the default fields
are passed anyway for an invalid mapping, so don't overcomplicate
this.
llvm-svn: 363391
In debug mode, the tool also raises a warning and prints out a message which
helps identify the problematic MCWriteProcResEntry from the scheduling class.
This message would have been useful to have when triaging PR42282.
llvm-svn: 363387
Initial commit of a new pass to create vector predication blocks, called VPT
blocks, that are supported by the Armv8.1-M MVE architecture.
This is a first naive implementation. I.e., for 2 consecutive predicated
instructions I1 and I2, for example, it will generate 2 VPT blocks:
VPST
I1
VPST
I2
A more optimal implementation would obviously put instructions in the same VPT
block when they are predicated on the same condition and when it is allowed to
do this:
VPTT
I1
I2
We will address this optimisation with follow up patches when the groundwork is
in. Creating VPT Blocks is very similar to IT Blocks, which is the reason I
added this to Thumb2ITBlocks.cpp. This allows reuse of the def use analysis
that we need for the more optimal implementation.
VPT blocks cannot be nested in IT blocks, and vice versa, and so these 2 passes
cannot interact with each other. Instructions allowed in VPT blocks must
be MVE instructions that are marked as VPT compatible.
Differential Revision: https://reviews.llvm.org/D63247
llvm-svn: 363370
With this patch we get ability to set any flags we want
for implicit sections defined in YAML.
Differential revision: https://reviews.llvm.org/D63136
llvm-svn: 363367
InsertBinop now accepts NoWrapFlags, so pass them through when
expanding a simple add expression.
This is the first re-commit of the functional changes from rL362687,
which was previously reverted.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363364
This is consistent with GCC's behavior (which is the defacto standard
for pubnames). Though I find the presence of enumerators from enum
classes to be a bit confusing, possibly a bug on GCC's end (since they
can't be named unqualified, unlike the other names - and names nested in
classes don't go in pubnames, for instance - presumably because one must
name the class first & that's enough to limit the scope of the search)
llvm-svn: 363349
It looks like an older version of gcc can't figure out that it needs to
move a unique_ptr while implicitly constructing an Expected object.
llvm-svn: 363342
Summary:
Before it was using the fully qualified name only for static data members.
Now it does for all variable names to match MSVC.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63012
llvm-svn: 363335
The only caller of SymbolizableObjectFile::create passes a non-null
DebugInfoContext and asserts that they do so. Move the assert into
SymbolizableObjectFile::create and remove null checks.
Differential Revision: https://reviews.llvm.org/D63298
llvm-svn: 363334
Constants, including G_GLOBAL_VALUE, are all emitted into the entry block which
lets us use the vreg def assuming it dominates all other users. However, it can
cause jumpy debug behaviour since the DebugLoc attached to these MIs are from
a user instruction that could be in a different block.
Fixes PR40887.
Differential Revision: https://reviews.llvm.org/D63286
llvm-svn: 363331
Merging the two bits shrinks the context table from 16384 bytes to 8192 bytes.
Remove the ATTRIBUTE_BITS macro and just create an enum directly. Then fix the ATTR_max define to be 8192 to reflect the table size so we stop hardcoding it separately.
llvm-svn: 363330
This was exposed by PowerPC target enablement.
In ScheduleDAG, if we haven't seen any uses in this scheduling region,
we will create a dependence edge to ExitSU to model the live-out latency.
This is required for vreg defs with no in-region use, and prefetches with
no vreg def.
When we build NodeOrder in Scheduler, we ignore these boundary nodes.
However, when we check Succs in checkValidNodeOrder, we did not skip
them, so we still assume all the nodes have been sorted and in order in
Indices array. So when we call lower_bound() for ExitSU, it will return
Indices.end(), causing memory issues in following Node access.
Differential Revision: https://reviews.llvm.org/D63282
llvm-svn: 363329
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363328
Support loading code coverage data from regular archives, thin archives,
and from MachO universal binaries which contain archives.
Testing: check-llvm, check-profile (with {A,UB}San enabled)
rdar://51538999
Differential Revision: https://reviews.llvm.org/D63232
llvm-svn: 363325
notifyResolved/notifyEmitted.
The 'notify' prefix better describes what these methods do: they update the JIT
symbol states and notify any pending queries that the 'resolved' and 'emitted'
states have been reached (rather than actually performing the resolution or
emission themselves). Since new states are going to be introduced in the near
future (to track symbol registration/initialization) it's worth changing the
convention pre-emptively to avoid further confusion.
llvm-svn: 363322
I find the current documentation of poison somewhat confusing,
mainly because its use of "undefined behavior" doesn't seem to
align with our usual interpretation (of immediate UB). Especially
the sentence "any instruction that has a dependence on a poison
value has undefined behavior" is very confusing.
Clarify poison semantics by:
* Replacing the introductory paragraph with the standard rationale
for having poison values.
* Spelling out that instructions depending on poison return poison.
* Spelling out how we go from a poison value to immediate undefined
behavior and give the two examples we currently use in ValueTracking.
* Spelling out that side effects depending on poison are UB.
Differential Revision: https://reviews.llvm.org/D63044
llvm-svn: 363320
I recently got this wrong (again), and I'm sure I'm not the only one. Put a comment in the logical place someone would look to "fix" the obvious "missed optimization" which arrises based on the common misunderstanding. Hopefully, this will save others time. :)
llvm-svn: 363318
As pointed out by Nikita in D62625, BackedgeTakenCount is generally used to refer to the backedge taken count of the loop. A conditional backedge taken count - one which only applies if a particular exit is taken - is called a ExitCount in SCEV code, so be consistent here.
llvm-svn: 363293
This contains fixes for two cases where we might invalidate inbounds and leave it stale in the IR (a miscompile). Case 1 is when switching to an IV with no dynamically live uses, and case 2 is when doing pre-to-post conversion on the same pointer type IV.
The basic scheme used is to prove that using the given IV (pre or post increment forms) would have to already trigger UB on the path to the test we're modifying. As such, our potential UB triggering use does not change the semantics of the original program.
As was pointed out in the review thread by Nikita, this is defending against a separate issue from the hasConcreteDef case. This is about poison, that's about undef. Unfortunately, the two are different, see Nikita's comment for a fuller explanation, he explains it well.
(Note: I'm going to address Nikita's last style comment in a separate commit just to minimize chance of subtle bugs being introduced due to typos.)
Differential Revision: https://reviews.llvm.org/D62939
llvm-svn: 363289
Add an AssumptionCache callback to the InlineFuntionInfo used for the
AlwaysInlinerPass to match codegen of the AlwaysInlinerLegacyPass to generate
llvm.assume. This fixes CodeGen/builtin-movdir.c when new PM is enabled by
default.
Differential Revision: https://reviews.llvm.org/D63170
llvm-svn: 363287
Summary:
I found the following case having tail blocks with no successors merging opportunities after block placement.
Before block placement:
bb0:
...
bne a0, 0, bb2:
bb1:
mv a0, 1
ret
bb2:
...
bb3:
mv a0, 1
ret
bb4:
mv a0, -1
ret
The conditional branch bne in bb0 is opposite to beq.
After block placement:
bb0:
...
beq a0, 0, bb1
bb2:
...
bb4:
mv a0, -1
ret
bb1:
mv a0, 1
ret
bb3:
mv a0, 1
ret
After block placement, that appears new tail merging opportunity, bb1 and bb3 can be merged as one block. So the conditional constraint for merging tail blocks with no successors should be removed. In my experiment for RISC-V, it decreases code size.
Author of original patch: Jim Lin
Reviewers: haicheng, aheejin, craig.topper, rnk, RKSimon, Jim, dmgreen
Reviewed By: Jim, dmgreen
Subscribers: xbolva00, dschuff, javed.absar, sbc100, jgravelle-google, aheejin, kito-cheng, dmgreen, PkmX, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54411
llvm-svn: 363284
Summary:
The logic in EarlyCSE that looks through 'not' operations in the
predicate recognizes e.g. that `select (not (cmp sgt X, Y)), X, Y` is
equivalent to `select (cmp sgt X, Y), Y, X`. Without this change,
however, only the latter is recognized as a form of `smin X, Y`, so the
two expressions receive different hash codes. This leads to missed
optimization opportunities when the quadratic probing for the two hashes
doesn't happen to collide, and assertion failures when probing doesn't
collide on insertion but does collide on a subsequent table grow
operation.
This change inverts the order of some of the pattern matching, checking
first for the optional `not` and then for the min/max/abs patterns, so
that e.g. both expressions above are recognized as a form of `smin X, Y`.
It also adds an assertion to isEqual verifying that it implies equal
hash codes; this fires when there's a collision during insertion, not
just grow, and so will make it easier to notice if these functions fall
out of sync again. A new flag --earlycse-debug-hash is added which can
be used when changing the hash function; it forces hash collisions so
that any pair of values inserted which compare as equal but hash
differently will be caught by the isEqual assertion.
Reviewers: spatel, nikic
Reviewed By: spatel, nikic
Subscribers: lebedev.ri, arsenm, craig.topper, efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62644
llvm-svn: 363274
Previously it copied over MachineMemOperands verbatim which caused MOV32rm to have store flags set, and MOV32mr to have load flags set. This fixes some assertions being thrown with EXPENSIVE_CHECKS on.
Committed on behalf of @luke (Luke Lau)
Differential Revision: https://reviews.llvm.org/D62726
llvm-svn: 363268
Summary:
Relate bug: https://bugs.llvm.org/show_bug.cgi?id=37472
The shrink wrapping pass prematurally restores the stack, at a point where the stack might still be accessed.
Taking an exception can cause the stack to be corrupted.
As a first approach, this patch is overly conservative, assuming that any instruction that may load or store could access
the stack.
Reviewers: dmgreen, qcolombet
Reviewed By: qcolombet
Subscribers: simpal01, efriedma, eli.friedman, javed.absar, llvm-commits, eugenis, chill, carwil, thegameg
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63152
llvm-svn: 363265
This commit prepares the way to start adding the main collection of
MVE instructions, which operate on the 128-bit vector registers.
The most obvious thing that's needed, and the simplest, is to add the
MQPR register class, which is like the existing QPR except that it has
fewer registers in it.
The more complicated part: MVE defines a system of vector predication,
in which instructions operating on 128-bit vector registers can be
constrained to operate on only a subset of the lanes, using a system
of prefix instructions similar to the existing Thumb IT, in that you
have one prefix instruction which designates up to 4 following
instructions as subject to predication, and within that sequence, the
predicate can be inverted by means of T/E suffixes ('Then' / 'Else').
To support instructions of this type, we've added two new Tablegen
classes `vpred_n` and `vpred_r` for standard clusters of MC operands
to add to a predicated instruction. Both include a flag indicating how
the instruction is predicated at all (options are T, E and 'not
predicated'), and an input register field for the register controlling
the set of active lanes. They differ from each other in that `vpred_r`
also includes an input operand for the previous value of the output
register, for instructions that leave inactive lanes unchanged.
`vpred_n` lacks that extra operand; it will be used for instructions
that don't preserve inactive lanes in their output register (either
because inactive lanes are zeroed, as the MVE load instructions do, or
because the output register isn't a vector at all).
This commit also adds the family of prefix instructions themselves
(VPT / VPST), and all the machinery needed to work with them in
assembly and disassembly (e.g. generating the 't' and 'e' mnemonic
suffixes on disassembled instructions within a predicated block)
I've added a couple of demo instructions that derive from the new
Tablegen base classes and use those two operand clusters. The bulk of
the vector instructions will come in followup commits small enough to
be manageable. (One exception is that I've added the full version of
`isMnemonicVPTPredicable` in the AsmParser, because it seemed
pointless to carefully split it up.)
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62669
llvm-svn: 363258
This patch makes the LiveDebugValues pass consider fragments when propagating
DBG_VALUE insts between blocks, fixing PR41979. Fragment info for a variable
location is added to the open-ranges key, which allows distinct fragments to be
tracked separately. To handle overlapping fragments things become slightly
funkier. To avoid excessive searching for overlaps in the data-flow part of
LiveDebugValues, this patch:
* Pre-computes pairings of fragments that overlap, for each DILocalVariable
* During data-flow, whenever something happens that causes an open range to
be terminated (via erase), any fragments pre-determined to overlap are
also terminated.
The effect of which is that when encountering a DBG_VALUE fragment that
overlaps others, the overlapped fragments do not get propagated to other
blocks. We still rely on later location-list building to correctly handle
overlapping fragments within blocks.
It's unclear whether a mixture of DBG_VALUEs with and without fragmented
expressions are legitimate. To avoid suprises, this patch interprets a
DBG_VALUE with no fragment as overlapping any DBG_VALUE _with_ a fragment.
Differential Revision: https://reviews.llvm.org/D62904
llvm-svn: 363256
Since the DebugLocEntry::Value is used as part of DwarfDebug and
DebugLocEntry make it as the separate class.
Reviewers: aprantl, dstenb
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D63213
llvm-svn: 363246
We aim to ignore changes in variable locations during the prologue and
epilogue of functions, to avoid using space documenting location changes
that aren't visible. However in D61940 / r362951 this got ripped out as
the previous implementation was unsound.
Instead, use the FrameDestroy flag to identify when we're in the epilogue
of a function, and ignore variable location changes accordingly. This fits
in with existing code that examines the FrameSetup flag.
Some variable locations get shuffled in modified tests as they now cover
greater ranges, which is what would be expected. Some additional
single-location variables are generated too. Two tests are un-xfailed,
they were only xfailed due to r362951 deleting functionality they depended
on.
Apparently some out-of-tree backends don't accurately maintain FrameDestroy
flags -- if you're an out-of-tree maintainer and see changes in variable
locations disappear due to a faulty FrameDestroy flag, it's safe to back
this change out. The impact is just slightly more debug info than necessary.
Differential Revision: https://reviews.llvm.org/D62314
llvm-svn: 363245
During assembly, the mask operand to an IT instruction (storing the
sequence of T/E for 'Then' and 'Else') is parsed out of the mnemonic
into a representation that encodes 'Then' and 'Else' in the same way
regardless of the condition code. At some point during encoding it has
to be converted into the instruction encoding used in the
architecture, in which the mask encodes a sequence of replacement
low-order bits for the condition code, so that which bit value means
'then' and which 'else' depends on whether the original condition code
had its low bit set.
Previously, that transformation was done by processInstruction(), half
way through assembly. So an MCOperand storing an IT mask would
sometimes store it in one format, and sometimes in the other,
depending on where in the assembly pipeline you were. You can see this
in diagnostics from `llvm-mc -debug -triple=thumbv8a -show-inst`, for
example: if you give it an instruction such as `itete eq`, you'd see
an `<MCOperand Imm:5>` in a diagnostic become `<MCOperand Imm:11>` in
the final output.
Having the same data structure store values with time-dependent
semantics is confusing already, and it will get more confusing when we
introduce the MVE VPT instruction which reuses the Then/Else bitmask
idea in a different context. So I'm refactoring: now, all `ARMOperand`
and `MCOperand` representations of an IT mask work exactly the same
way, namely, 0 means 'Then' and 1 means 'Else', regardless of what
original predicate is being referred to. The architectural encoding of
IT that depends on the original condition is now constructed at the
point when we turn the `MCOperand` into the final instruction bit
pattern, and decoded similarly in the disassembler.
The previous condition-independent parse-time format used 0 for Else
and 1 for Then. I've taken the opportunity to flip the sense of it
while I'm changing all of this anyway, because it seems to me more
natural to use 0 for 'leave the starting condition unchanged' and 1
for 'invert it', as if those bits were an XOR mask.
Reviewers: ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63219
llvm-svn: 363244
This patch uses the mechanism from D62995 to strengthen the
definitions of the reduction intrinsics by letting the scalar
result/accumulator type be overloaded from the vector element type.
For example:
; The LLVM LangRef specifies that the scalar result must equal the
; vector element type, but this is not checked/enforced by LLVM.
declare i32 @llvm.experimental.vector.reduce.or.i32.v4i32(<4 x i32> %a)
This patch changes that into:
declare i32 @llvm.experimental.vector.reduce.or.v4i32(<4 x i32> %a)
Which has the type-constraint more explicit and causes LLVM to check
the result type with the vector element type.
Reviewers: RKSimon, arsenm, rnk, greened, aemerson
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62996
llvm-svn: 363240
TTI should report that it's not profitable to generate a hardware loop
if it, or one of its child loops, has already been converted.
Differential Revision: https://reviews.llvm.org/D63212
llvm-svn: 363234
Extend the mechanism to overload intrinsic arguments by using either
backward or forward references to the overloadable arguments.
In for example:
def int_something : Intrinsic<[LLVMPointerToElt<0>],
[llvm_anyvector_ty], []>;
LLVMPointerToElt<0> is a forward reference to the overloadable operand
of type 'llvm_anyvector_ty' and would allow intrinsics such as:
declare i32* @llvm.something.v4i32(<4 x i32>);
declare i64* @llvm.something.v2i64(<2 x i64>);
where the result pointer type is deduced from the element type of the
first argument.
If the returned pointer is not a pointer to the element type, LLVM will
give an error:
Intrinsic has incorrect return type!
i64* (<4 x i32>)* @llvm.something.v4i32
Reviewers: RKSimon, arsenm, rnk, greened
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62995
llvm-svn: 363233
This reverts 363226 and 363227, both NFC intended
I swear I fixed the test case that is failing, and ran
the tests, but I will look into it again.
llvm-svn: 363229
and replace with an equilivent countTrailingZeros.
GCD is much more expensive than this, with repeated division.
This depends on D60823
Differential Revision: https://reviews.llvm.org/D61151
llvm-svn: 363227
Summary:
- Remove redundant initializations from pass constructors that were
already being initialized by LLVMInitializeX86Target().
- Add initialization function for the FPS pass.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63218
llvm-svn: 363221
We have observed some failures with internal builds with this revision.
- Performance regressions:
- llvm's SingleSource/Misc evalloop shows performance regressions (although these may be red herrings).
- Benchmarks for Abseil's SwissTable.
- Correctness:
- Failures for particular libicu tests when building the Google AppEngine SDK (for PHP).
hwennborg has already been notified, and is aware of reproducer failures.
llvm-svn: 363220
Add support for s.d instruction for Mips1 which expands into two swc1
instructions.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D63199
llvm-svn: 363184
SCEV does not propagate arguments through one-input Phis so as to make it easy for the SCEV expander (and related code) to preserve LCSSA. It's not entirely clear this restriction is neccessary, but for the moment it exists. For this reason, we don't analyze single-entry phi inputs. However it is possible that when an this input leaves the loop through LCSSA Phi, it is a provable constant. Missing that results in an order of optimization issue in loop exit value rewriting where we miss some oppurtunities based on order in which we visit sibling loops.
This patch teaches computeSCEVAtScope about this case. We can generalize it later, but so far we can only replace LCSSA Phis with their constant loop-exiting values. We should probably also add similiar logic directly in the SCEV construction path itself.
Patch by: mkazantsev (with revised commit message by me)
Differential Revision: https://reviews.llvm.org/D58113
llvm-svn: 363180
As discussed on D62910, we need to check whether particular types of memory access are allowed, not just their alignment/address-space.
This NFC patch adds a MachineMemOperand::Flags argument to allowsMemoryAccess and allowsMisalignedMemoryAccesses, and wires up calls to pass the relevant flags to them.
If people are happy with this approach I can then update X86TargetLowering::allowsMisalignedMemoryAccesses to handle misaligned NT load/stores.
Differential Revision: https://reviews.llvm.org/D63075
llvm-svn: 363179
This was using its own, outdated list of possible captures. This was
at minimum not catching cmpxchg and addrspacecast captures.
One change is now any volatile access is treated as capturing. The
test coverage for this pass is quite inadequate, but this required
removing volatile in the lifetime capture test.
Also fixes some infrastructure issues to allow running just the IR
pass.
Fixes bug 42238.
llvm-svn: 363169
Without this fix clang 3.6 complains with:
../lib/Target/ARM/ARMAsmPrinter.cpp:1473:18: error: variable 'BranchTarget' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
} else if (MI->getOperand(1).isSymbol()) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../lib/Target/ARM/ARMAsmPrinter.cpp:1479:22: note: uninitialized use occurs here
MCInst.addExpr(BranchTarget);
^~~~~~~~~~~~
../lib/Target/ARM/ARMAsmPrinter.cpp:1473:14: note: remove the 'if' if its condition is always true
} else if (MI->getOperand(1).isSymbol()) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../lib/Target/ARM/ARMAsmPrinter.cpp:1465:33: note: initialize the variable 'BranchTarget' to silence this warning
const MCExpr *BranchTarget;
^
= nullptr
1 error generated.
Discussed here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190610/661417.html
llvm-svn: 363166
This changes the standalone pass only. Arguably the utility class
itself should assert there are no convergent calls. However, a target
pass with additional context may still be able to version a loop if
all of the dynamic conditions are sufficiently uniform.
llvm-svn: 363165
Summary:
Fix hoisting to basic block which are not legal for hoisting cause
it can be terminated by exception or it is return block.
Reviewers: john.brawn, RKSimon, MatzeB
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63148
llvm-svn: 363164
This case is slightly tricky, because loop distribution should be
allowed in some cases, and not others. As long as runtime dependency
checks don't need to be introduced, this should be OK. This is further
complicated by the fact that LoopDistribute partially ignores if LAA
says that vectorization is safe, and then does its own runtime pointer
legality checks.
Note this pass still does not handle noduplicate correctly, as this
should always be forbidden with it. I'm not going to bother trying to
fix it, as it would require more effort and I think noduplicate should
be removed.
https://reviews.llvm.org/D62607
llvm-svn: 363160
The capture was added in the first commit of https://reviews.llvm.org/D61934
when it was used. In the reland, the use was removed but the capture
wasn't removed.
llvm-svn: 363155
Implement the backend target hook to drive the HardwareLoops pass.
The low-overhead branch extension for Arm M-class cores is flexible
enough that we don't have to ensure correctness at this point, except
checking that the loop counter variable can be stored in LR - a
32-bit register. For it to be profitable, we want to avoid loops that
contain function calls, or any other instruction that alters the PC.
This implementation uses TargetLoweringInfo, to query type and
operation actions, looks at intrinsic calls and also performs some
manual checks for remainder/division and FP operations.
I think this should be a good base to start and extra details can be
filled out later.
Differential Revision: https://reviews.llvm.org/D62907
llvm-svn: 363149
'Use wrap flags in InsertBinop' (rL362687) was reverted due to
miscompiles. This patch introduces the previous change to pass
no-wrap flags but now only FlagAnyWrap is passed.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363147
r363016 let lld-link and llvm-lib share the /machine: parsing code.
This lets llvm-cvtres share it as well.
Making llvm-cvtres depend on llvm-lib seemed a bit strange (it doesn't
need llvm-lib's dependencies on BinaryFormat and BitReader) and I
couldn't find a good place to put this code. Since it's just a few
lines, put it in lib/Object for now.
Differential Revision: https://reviews.llvm.org/D63120
llvm-svn: 363144
Noticed in D63075 - there was a allowsMisalignedMemoryAccesses call to check for unaligned loads and a check for aligned legal type loads - which is exactly what allowsMemoryAccess does.
llvm-svn: 363141
Dependent libraries support for the legacy api was committed in a
broken state (see: https://reviews.llvm.org/D60274). This was missed
due to the painful nature of having to integrate the changes into a
linker in order to test. This change implements support for dependent
libraries in the legacy LTO api:
- I have removed the current api function, which returns a single
string, and added functions to access each dependent library
specifier individually.
- To reduce the testing pain, I have made the api functions as thin as
possible to maximize coverage from llvm-lto.
- When doing ThinLTO the system linker will load the modules lazily
when scanning the input files. Unfortunately, when modules are
lazily loaded there is no access to module level named metadata. To
fix this I have added api functions that allow querying the IRSymtab
for the dependent libraries. I hope to expand the api in the future
so that, eventually, all the information needed by a client linker
during scan can be retrieved from the IRSymtab.
Differential Revision: https://reviews.llvm.org/D62935
llvm-svn: 363140
Noticed in D63075 - there was a allowsMisalignedMemoryAccesses call to check for unaligned loads and a check for aligned legal type loads - which is exactly what allowsMemoryAccess does.
llvm-svn: 363137
Extern global merging is good for code-size. There's definitely potential for
performance too, but there's one regression in a benchmark that needs
investigating, so that's why we enable it only when we optimise for size for
now.
Patch by Ramakota Reddy and Sjoerd Meijer.
Differential Revision: https://reviews.llvm.org/D61947
llvm-svn: 363130
The non-masked versions are already in there. I'm having some
trouble coming up with a way to test this right now. Most load
folding should happen during isel so I'm not sure how to get
peephole pass to do it.
llvm-svn: 363125
In order to generate correct debug frame information, it needs to
generate CFI information in prologue and epilog.
Differential Revision: https://reviews.llvm.org/D61773
llvm-svn: 363120
The issue is that if we have a loop with multiple predecessors outside the loop, the code was expecting to merge them and only return if equal, but instead returned the first one seen.
I have no idea if this actually tripped anywhere. I noticed it by accident when reading the code and have no idea how to go about constructing a test case.
llvm-svn: 363112
We were only matching RHS being a loop invariant value, not the inverse. Since there's nothing which appears to canonicalize loop invariant values to RHS, this means we missed cases.
Differential Revision: https://reviews.llvm.org/D63112
llvm-svn: 363108
We have the related getSplatValue() already in IR (see code just above the proposed addition).
But sometimes we only need to know that the value is a splat rather than capture the splatted
scalar value. Also, we have an isSplatValue() function already in SDAG.
Motivation - recent bugs that would potentially benefit from improved splat analysis in IR:
https://bugs.llvm.org/show_bug.cgi?id=37428https://bugs.llvm.org/show_bug.cgi?id=42174
Differential Revision: https://reviews.llvm.org/D63138
llvm-svn: 363106
This opcode generates a pointer to the address of the jump table
specified by the source operand, which is a jump table index.
It will be used in conjunction with an upcoming G_BRJT opcode to support
jump table codegen with GlobalISel.
Differential Revision: https://reviews.llvm.org/D63111
llvm-svn: 363096
Summary: After applying a set of insert updates, there may be trivial Phis left over. Clean them up.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63033
llvm-svn: 363094
Summary:
The method `getLoopPassPreservedAnalyses` should not mark MemorySSA as
preserved, because it's being called in a lot of passes that do not
preserve MemorySSA.
Instead, mark the MemorySSA analysis as preserved by each pass that does
preserve it.
These changes only affect the new pass mananger.
Reviewers: chandlerc
Subscribers: mehdi_amini, jlebar, Prazek, george.burgess.iv, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62536
llvm-svn: 363091
Summary: Deduplicate S_CONSTANTS when linking, if they have the same value.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63151
llvm-svn: 363089
Implement necessary target hooks to enable MachinePipeliner for P9 only.
The pass is off by default, can be enabled with -ppc-enable-pipeliner for P9.
Differential Revision: https://reviews.llvm.org/D62164
llvm-svn: 363085
When moving a temp file, explicitly set the file descriptor to -1 so we
can never accidentally close the moved-from TempFile.
Differential revision: https://reviews.llvm.org/D63087
llvm-svn: 363083
Users are exepcted to pass all .res files to the linker, which then
merges all the resource in all .res files into a tree structure and then
converts the final tree structure to a .obj file with .rsrc$01 and
.rsrc$02 sections and then links that.
If the user instead passes several .obj files containing such resources,
the correct thing to do would be to have custom code to merge the trees
in the resource sections instead of doing normal section merging -- but
link.exe rejects if multiple resource obj files are passed in with
LNK4078, so let lld-link do that too instead of silently writing broken
.rsrc sections in that case.
The only real way to run into this is if users manually convert .res
files to .obj files by running cvtres and then handing the resulting
.obj files to lld-link instead, which in practice likely never happens.
(lld-link is slightly stricter than link.exe now: If link.exe is passed
one .obj file created by cvtres, and a .res file, for some reason it
just emits a warning instead of an error and outputs strange looking
data. lld-link now errors out on mixed input like this.)
One way users could accidentally run into this is the following
scenario: If a .res file is passed to lib.exe, then lib.exe calls
cvtres.exe on the .res file before putting it in the output .lib.
(llvm-lib currently doesn't do this.)
link.exe's /wholearchive seems to only add obj files referenced from the
static library index, but lld-link current really adds all files in the
archive. So if lld-link /wholearchive is used with .lib files produced
by lib.exe and .res files were among the files handed to lib.exe, we
previously silently produced invalid output, but now we error out.
link.exe's /wholearchive semantics on the other hand mean that it
wouldn't load the resource object files from the .lib file at all.
Since this scenario is probably still an unlikely corner case,
the difference in behavior here seems fine -- and lld-link might have to
change to use link.exe's /wholearchive semantics in the future anyways.
Vaguely related to PR42180.
Differential Revision: https://reviews.llvm.org/D63109
llvm-svn: 363078
This patch allows lowering of PIC addresses by using PC-relative
addressing for DSO-local symbols and accessing the address through the
global offset table for non-DSO-local symbols.
Differential Revision: https://reviews.llvm.org/D55303
llvm-svn: 363058
This validates and lowers arguments to inline asm nodes which have the
constraints I, J & K, with the following semantics (equivalent to GCC):
I: Any 12-bit signed immediate.
J: Immediate integer zero only.
K: Any 5-bit unsigned immediate.
Differential Revision: https://reviews.llvm.org/D54093
llvm-svn: 363054
This introduces a new decoding table for MVE instructions, and starts
by adding the family of scalar shift instructions that are part of the
MVE architecture extension: saturating shifts within a single GPR, and
long shifts across a pair of GPRs (both saturating and normal).
Some of these shift instructions have only 3-bit register fields in
the encoding, with the low bit fixed. So they can only address an odd
or even numbered GPR (depending on the operand), and therefore I add
two new register classes, GPREven and GPROdd.
Differential Revision: https://reviews.llvm.org/D62668
Change-Id: Iad95d5f83d26aef70c674027a184a6b1e0098d33
llvm-svn: 363051
For lld, pass in Config->Timestamp (which is set based on lld's
/timestamp: and /Brepro flags). Since the writeWindowsResourceCOFF()
data is only used in-memory by LLD and the obj's timestamp isn't used
for anything in the output, this doesn't change behavior.
For llvm-cvtres, add an optional /timestamp: parameter, and use the
current behavior of calling time() if the parameter is not passed in.
This doesn't really change observable behavior (unless someone passes
/timestamp: to llvm-cvtres, which wasn't possible before), but it
removes the last unqualified call to time() from llvm/lib, which seems
like a good thing.
Differential Revision: https://reviews.llvm.org/D63116
llvm-svn: 363050
As suggested by @arsenm on D63075 - this adds a TargetLowering::allowsMemoryAccess wrapper that takes a Load/Store node's MachineMemOperand to handle the AddressSpace/Alignment arguments and will also implicitly handle the MachineMemOperand::Flags change in D63075.
llvm-svn: 363048
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
I have set up a separate review D61933 for a fix which is required for this patch.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel, jmorse
Reviewed By: hfinkel, jmorse
Subscribers: jmorse, javed.absar, eraman, kcc, bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
llvm-svn: 363046
The variable `OffsetMask` is currently only used in an assertion, so
if assertions are compiled out and -Werror is enabled, it becomes a
build failure.
llvm-svn: 363043
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need a new
addressing mode.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 363039
This patch changes how LLVM handles the accumulator/start value
in the reduction, by never ignoring it regardless of the presence of
fast-math flags on callsites. This change introduces the following
new intrinsics to replace the existing ones:
llvm.experimental.vector.reduce.fadd -> llvm.experimental.vector.reduce.v2.fadd
llvm.experimental.vector.reduce.fmul -> llvm.experimental.vector.reduce.v2.fmul
and adds functionality to auto-upgrade existing LLVM IR and bitcode.
Reviewers: RKSimon, greened, dmgreen, nikic, simoll, aemerson
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D60261
llvm-svn: 363035
This reverts r362990 (git commit 374571301d)
This was causing linker warnings on Darwin:
ld: warning: direct access in function 'llvm::initializeEvexToVexInstPassPass(llvm::PassRegistry&)'
from file '../../lib/libLLVMX86CodeGen.a(X86EvexToVex.cpp.o)' to global weak symbol
'void std::__1::__call_once_proxy<std::__1::tuple<void* (&)(llvm::PassRegistry&),
std::__1::reference_wrapper<llvm::PassRegistry>&&> >(void*)' from file '../../lib/libLLVMCore.a(Verifier.cpp.o)'
means the weak symbol cannot be overridden at runtime. This was likely caused by different translation
units being compiled with different visibility settings.
llvm-svn: 363028
This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
And share some code with lld-link.
While here, also add a FIXME about PR42180 and merge r360150 to llvm-lib.
Differential Revision: https://reviews.llvm.org/D63021
llvm-svn: 363016
Returns "cortex-a73" for 3rd and 4th gen Kryo; not precisely correct,
but close enough.
Differential Revision: https://reviews.llvm.org/D63099
llvm-svn: 363013
An earlier fix of a subtle iterator invalidation bug had uncovered a
nondeterminism that was present in the MultiUsers bag. Problem was that
MultiUsers was being looked up using pointers.
This patch is an NFC change that numbers each multiuser and processes each in
numbered order. This fixes the test failure on netbsd and will likely fix the
green-dragon bot too.
llvm-svn: 363012
Previous detection relied upon an arbitrary hard coded limit of 21
response files, which some code bases were running up against.
The new detection maintains a stack of processing response files and
explicitly checks if a newly encountered file is in the current stack.
Some bookkeeping data is necessary in order to detect when to pop the
stack.
Patch by Chris Glover.
Differential Revision: https://reviews.llvm.org/D62798
llvm-svn: 363005
As shown in PR41279, some basic blocks (such as catchswitch) cannot be
instrumented. This patch filters out these BBs in PGO instrumentation.
It also sets the profile count to the fail-to-instrument edge, so that we
can propagate the counts in the CFG.
Differential Revision: https://reviews.llvm.org/D62700
llvm-svn: 362995
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
llvm-svn: 362990
If the source is undef, then just don't do anything.
This matches SelectionDAG's behaviour in SelectionDAG.cpp.
Also add a test showing that we do the right thing here.
(irtranslator-memfunc-undef.ll)
Differential Revision: https://reviews.llvm.org/D63095
llvm-svn: 362989
This was discussed as part of D62880. The basic thought is that computing BE taken count after widening should produce (on average) an equally good backedge taken count as the one before widening. Since there's only one test in the suite which is impacted by this change, and it's essentially equivelent codegen, that seems to be a reasonable assertion. This change was separated from r362971 so that if this turns out to be problematic, the triggering piece is obvious and easily revertable.
For the nestedIV example from elim-extend.ll, we end up with the following BE counts:
BEFORE: (-2 + (-1 * %innercount) + %limit)
AFTER: (-1 + (sext i32 (-1 + %limit) to i64) + (-1 * (sext i32 %innercount to i64))<nsw>)
Note that before is an i32 type, and the after is an i64. Truncating the i64 produces the i32.
llvm-svn: 362975
This was found during HTM cleanup.
Adding a test for builtin_ttest would expose following issue.
*** Bad machine code: Illegal physical register for instruction ***
- function: test10
- basic block: %bb.0 entry (0xf0e57497b58)
- instruction: %5:crrc0 = TABORTWCI 0, $zero, 0
- operand 2: $zero
$zero is not a GPRC register.
LLVM ERROR: Found 1 machine code errors.
Differential Revision: https://reviews.llvm.org/D63079
llvm-svn: 362974
This change does the plumbing to wire an ExitingBB parameter through the LFTR implementation, and reorganizes the code to work in terms of a set of individual loop exits. Most of it is fairly obvious, but there's one key complexity which makes it worthy of consideration. The actual multi-exit LFTR patch is in D62625 for context.
Specifically, it turns out the existing code uses the backedge taken count from before a IV is widened. Oddly, we can end up with a different (more expensive, but semantically equivelent) BE count for the loop when requerying after widening. For the nestedIV example from elim-extend, we end up with the following BE counts:
BEFORE: (-2 + (-1 * %innercount) + %limit)
AFTER: (-1 + (sext i32 (-1 + %limit) to i64) + (-1 * (sext i32 %innercount to i64))<nsw>)
This is the only test in tree which seems sensitive to this difference. The actual result of using the wider BETC on this example is that we actually produce slightly better code. :)
In review, we decided to accept that test change. This patch is structured to preserve the old behavior, but a separate change will immediate follow with the behavior change. (I wanted it separate for problem attribution purposes.)
Differential Revision: https://reviews.llvm.org/D62880
llvm-svn: 362971
This behavior was added in r130928 for both FastISel and SD, and then
disabled in r131156 for FastISel.
This re-enables it for FastISel with the corresponding fix.
This is triggered only when FastISel can't lower the arguments and falls
back to SelectionDAG for it.
FastISel contains a map of "register fixups" where at the end of the
selection phase it replaces all uses of a register with another
register that FastISel sometimes pre-assigned. Code at the end of
SelectionDAGISel::runOnMachineFunction is doing the replacement at the
very end of the function, while other pieces that come in before that
look through the MachineFunction and assume everything is done. In this
case, the real issue is that the code emitting COPY instructions for the
liveins (physreg to vreg) (EmitLiveInCopies) is checking if the vreg
assigned to the physreg is used, and if it's not, it will skip the COPY.
If a register wasn't replaced with its assigned fixup yet, the copy will
be skipped and we'll end up with uses of undefined registers.
This fix moves the replacement of registers before the emission of
copies for the live-ins.
The initial motivation for this fix is to enable tail calls for
swiftself functions, which were blocked because we couldn't prove that
the swiftself argument (which is callee-save) comes from a function
argument (live-in), because there was an extra copy (vreg to vreg).
A few tests are affected by this:
* llvm/test/CodeGen/AArch64/swifterror.ll: we used to spill x21
(callee-save) but never reload it because it's attached to the return.
We now don't even spill it anymore.
* llvm/test/CodeGen/*/swiftself.ll: we tail-call now.
* llvm/test/CodeGen/AMDGPU/mubuf-legalize-operands.ll: I believe this
test was not really testing the right thing, but it worked because the
same registers were re-used.
* llvm/test/CodeGen/ARM/cmpxchg-O0.ll: regalloc changes
* llvm/test/CodeGen/ARM/swifterror.ll: get rid of a copy
* llvm/test/CodeGen/Mips/*: get rid of spills and copies
* llvm/test/CodeGen/SystemZ/swift-return.ll: smaller stack
* llvm/test/CodeGen/X86/atomic-unordered.ll: smaller stack
* llvm/test/CodeGen/X86/swifterror.ll: same as AArch64
* llvm/test/DebugInfo/X86/dbg-declare-arg.ll: stack size changed
Differential Revision: https://reviews.llvm.org/D62361
llvm-svn: 362963
These caused a build failure because I managed not to notice they
depended on a later unpushed commit in my current stack. Sorry about
that.
llvm-svn: 362956
This should have been part of r362953, but I had a finger-trouble
incident and committed the old rather than new version of the patch.
Sorry.
llvm-svn: 362955
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need some new
addressing modes.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 362953
This commit reapplies r359426 (which was reverted in r360301 due to
performance problems) and rolls in D61940 to address the performance problem.
I've combined the two to avoid creating a span of slow-performance, and to
ease reverting if more problems crop up.
The summary of D61940: This patch removes the "ChangingRegs" facility in
DbgEntityHistoryCalculator, as its overapproximate nature can produce incorrect
variable locations. An unchanging register doesn't mean a variable doesn't
change its location.
The patch kills off everything that calculates the ChangingRegs vector.
Previously ChangingRegs spotted epilogues and marked registers as unchanging if
they weren't modified outside the epilogue, increasing the chance that we can
emit a single-location variable record. Without this feature,
debug-loc-offset.mir and pr19307.mir become temporarily XFAIL. They'll be
re-enabled by D62314, using the FrameDestroy flag to identify epilogues, I've
split this into two steps as FrameDestroy isn't necessarily supported by all
backends.
The logic for terminating variable locations at the end of a basic block now
becomes much more enjoyably simple: we just terminate them all.
Other test changes: inlined-argument.ll becomes XFAIL, but for a longer term.
The current algorithm for detecting that a variable has a single-location
doesn't work in this scenario (inlined function in multiple blocks), only other
bugs were making this test work. fission-ranges.ll gets slightly refreshed too,
as the location of "p" is now correctly determined to be a single location.
Differential Revision: https://reviews.llvm.org/D61940
llvm-svn: 362951
Similar to rL362909:
This isn't the ideal fix (use FMF on the select), but it's still an
improvement until we have better FMF propagation to selects and other
FP math operators.
I don't think there's much risk of regression from this change by
not including the FMF on the fcmp any more. The nsz/nnan FMF
should be the same on the fcmp and the fsub because they have the
same operand.
llvm-svn: 362943
Arm v8.1-M supports the VMOV instructions that move a half-precision
value to and from a GPR, but not if the GPR is SP or PC.
To fix this, I've changed those instructions to use the rGPR register
class instead of GPR. rGPR always excludes PC, and it excludes SP
except in the presence of the HasV8Ops target feature (i.e. Arm v8-A).
So the effect is that VMOV.F16 to and from PC is now illegal
everywhere, but VMOV.F16 to and from SP is illegal only on non-v8-A
cores (which I believe is all as it should be).
Reviewers: dmgreen, samparker, SjoerdMeijer, ostannard
Reviewed By: ostannard
Subscribers: ostannard, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60704
llvm-svn: 362942
This is a follow-up for D62809.
Content and Size fields should be optional as was discussed in comments
of the D62809's thread. With that, we can describe a specific string table and
symbol table sections in a more correct way and also show appropriate errors.
The patch adds lots of test cases where the behavior is described in details.
Differential revision: https://reviews.llvm.org/D62957
llvm-svn: 362931
Matt Arsenault