We saw a 70% ThinLTO link time increase in Chromium for Android, see
crbug.com/978817. Sounds like more of PR42210.
> Recommit of D32530 with a few small changes:
> - Stopped recursively walking through aggregates in
> the verifier, so that we don't impose too much
> overhead on large modules under LTO (see PR42210).
> - Changed tests to match; the errors are slightly
> different since they only report the array or
> struct that actually contains a scalable vector,
> rather than all aggregates which contain one in
> a nested member.
> - Corrected an older comment
>
> Reviewers: thakis, rengolin, sdesmalen
>
> Reviewed By: sdesmalen
>
> Differential Revision: https://reviews.llvm.org/D63321
llvm-svn: 364543
Add the IR and the AsmPrinter parts for handling of the DW_OP_entry_values
DWARF operation.
([11/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60866
llvm-svn: 364542
A unique DISubprogram may be attached to a function declaration used for
call site debug info.
([6/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60713
llvm-svn: 364500
This patch teaches the Verifier how to detect broken !llvm.loop
attachments as discussed in https://reviews.llvm.org/D60831. This
allows LLVM to warn and strip out the broken debug info before
attempting an LTO compilation with input generated by LLVM predating
https://reviews.llvm.org/rL361149.
rdar://problem/51631158
Differential Revision: https://reviews.llvm.org/D63499
[Re-applies r363725 without changes after fixing a broken testcase.]
llvm-svn: 363731
This patch teaches the Verifier how to detect broken !llvm.loop
attachments as discussed in https://reviews.llvm.org/D60831. This
allows LLVM to warn and strip out the broken debug info before
attempting an LTO compilation with input generated by LLVM predating
https://reviews.llvm.org/rL361149.
rdar://problem/51631158
Differential Revision: https://reviews.llvm.org/D63499
llvm-svn: 363725
Recommit of D32530 with a few small changes:
- Stopped recursively walking through aggregates in
the verifier, so that we don't impose too much
overhead on large modules under LTO (see PR42210).
- Changed tests to match; the errors are slightly
different since they only report the array or
struct that actually contains a scalable vector,
rather than all aggregates which contain one in
a nested member.
- Corrected an older comment
Reviewers: thakis, rengolin, sdesmalen
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D63321
llvm-svn: 363658
This patch tests the forward-referencing added in D62995 by changing
some existing intrinsics to use forward referencing of overloadable
parameters, rather than backward referencing.
This patch changes the TableGen definition/implementation of
llvm.aarch64.neon.ld2lane and llvm.aarch64.neon.ld2lane intrinsics
(and similar for ld3 and ld4). This change is intended to be
non-functional, since the behaviour of the intrinsics is
expected to be the same.
Reviewers: arsenm, dmgreen, RKSimon, greened, rnk
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D63189
llvm-svn: 363546
* Adds a 'scalable' flag to VectorType
* Adds an 'ElementCount' class to VectorType to pass (possibly scalable) vector lengths, with overloaded operators.
* Modifies existing helper functions to use ElementCount
* Adds support for serializing/deserializing to/from both textual and bitcode IR formats
* Extends the verifier to reject global variables of scalable types
* Updates documentation
See the latest version of the RFC here: http://lists.llvm.org/pipermail/llvm-dev/2018-July/124396.html
Reviewers: rengolin, lattner, echristo, chandlerc, hfinkel, rkruppe, samparker, SjoerdMeijer, greened, sebpop
Reviewed By: hfinkel, sebpop
Differential Revision: https://reviews.llvm.org/D32530
llvm-svn: 361953
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
DWARF5, 2.12 20ff says that
Any debugging information entry representing a pointer or reference
type [may have a DW_AT_address_class attribute].
The existing code (https://reviews.llvm.org/D29670) seems to take a
quite literal interpretation of that wording. I don't see a reason why
an rvalue reference isn't a reference type in the spirit of that
paragraph. This patch allows rvalue references to also have address
spaces.
rdar://problem/50511483
Differential Revision: https://reviews.llvm.org/D61625
llvm-svn: 360176
As of r356091, support for the ImmArg intrinsics was added,
including a SystemZ test case. However, that test case doesn't
actually verify all SystemZ intrinsics with immediate arguments,
only a subset. The rest of them actually works correctly, there's
just no test for them. This patch add all missing intrinsics.
llvm-svn: 358495
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
llvm-svn: 356144
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
llvm-svn: 356091
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
I'm not sure what's going on with the immediates.ll test. It seems to
be intended to test invalid cases like this, but then tries to handle
some of them anyway. I've moved the cases that were inconsistent with
the GCCBuiltin definition so they don't test the codegen anymore.
llvm-svn: 356085
This indicates an intrinsic parameter is required to be a constant,
and should not be replaced with a non-constant value.
Add the attribute to all AMDGPU and generic intrinsics that comments
indicate it should apply to. I scanned other target intrinsics, but I
don't see any obvious comments indicating which arguments are intended
to be only immediates.
This breaks one questionable testcase for the autoupgrade. I'm unclear
on whether the autoupgrade is supposed to really handle declarations
which were never valid. The verifier fails because the attributes now
refer to a parameter past the end of the argument list.
llvm-svn: 355981
The Verifier is separate from the MachineVerifier, so move it to a
different directory. Some other verifier tests were scattered in
target codegen tests as well (although I'm sure I missed some). Work
towards using a more consistent naming scheme to make it clearer where
the gaps still are for generic instructions.
llvm-svn: 354138
These haven't been checking anything useful and have been testing the
wrong failure reason for many years. Replace them with something which
stresses what is actually implemented in the verifier now.
llvm-svn: 354070
A number of of tests were using imm operands, not cimm. Since CSE
relies on the exact ConstantInt* pointer used, and implicit
conversions are generally evil, also enforce the bitsize of the types.
llvm-svn: 353113
Implement options in clang to enable recording the driver command-line
in an ELF section.
Implement a new special named metadata, llvm.commandline, to support
frontends embedding their command-line options in IR/ASM/ELF.
This differs from the GCC implementation in some key ways:
* In GCC there is only one command-line possible per compilation-unit,
in LLVM it mirrors llvm.ident and multiple are allowed.
* In GCC individual options are separated by NULL bytes, in LLVM entire
command-lines are separated by NULL bytes. The advantage of the GCC
approach is to clearly delineate options in the face of embedded
spaces. The advantage of the LLVM approach is to support merging
multiple command-lines unambiguously, while handling embedded spaces
with escaping.
Differential Revision: https://reviews.llvm.org/D54487
Clang Differential Revision: https://reviews.llvm.org/D54489
llvm-svn: 349155
These opcodes are intended to subsume some of the capability of G_MERGE_VALUES,
as it was too powerful and thus complex to add deal with throughout the GISel
pipeline.
G_BUILD_VECTOR creates a vector value from a sequence of uniformly typed
scalar values. G_BUILD_VECTOR_TRUNC is a special opcode for handling scalar
operands which are larger than the destination vector element type, and
therefore does an implicit truncate.
G_CONCAT_VECTOR creates a vector by concatenating smaller, uniformly typed,
vectors together.
These will be used in a subsequent commit. This commit just adds the initial
infrastructure.
Differential Revision: https://reviews.llvm.org/D53594
llvm-svn: 348430
Summary:
StructRet attribute is not allowed in vararg calls. The statepoint
intrinsic is vararg, but the wrapped function may be not. Allow
calls of statepoint with StructRet arg, as long as the wrapped
function is not vararg.
Reviewers: thanm, anna
Reviewed By: anna
Subscribers: anna, llvm-commits
Differential Revision: https://reviews.llvm.org/D53602
llvm-svn: 347050
If present, PHI nodes must appear before non-PHI nodes in a basic block. The
register allocator relies on this and will fail to eliminate PHI's that do not
meet this requirement.
llvm-svn: 343731
This patch removes addBlockByrefAddress(), it is dead code as far as
clang is concerned: Every byref block capture is emitted with a
complex expression that is equivalent to what this function does.
rdar://problem/31629055
Differential Revision: https://reviews.llvm.org/D51763
llvm-svn: 341737
LangRef for BitCast requires that
"The bit sizes of value and the destination type, ty2, must be identical".
Currently verifier allows BitCast of pointer to vector of pointers so that
the sizes are different.
This change fixes that.
Reviewers: arsenm
Reviewed By: arsenm
Subscribers: llvm-commits, wdng
Differential Revision: https://reviews.llvm.org/D50886
llvm-svn: 340249
=== Generating the CG Profile ===
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
```
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
```
Differential Revision: https://reviews.llvm.org/D48105
llvm-svn: 335794
This is the first pass in the main pipeline to use the legacy PM's
ability to run function analyses "on demand". Unfortunately, it turns
out there are bugs in that somewhat-hacky approach. At the very least,
it leaks memory and doesn't support -debug-pass=Structure. Unclear if
there are larger issues or not, but this should get the sanitizer bots
back to green by fixing the memory leaks.
llvm-svn: 335320
This patch adds support for generating a call graph profile from Branch Frequency Info.
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
Differential Revision: https://reviews.llvm.org/D48105
llvm-svn: 335306
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Hans Wennborg