This patch fixes https://bugs.llvm.org/show_bug.cgi?id=41293 and
https://bugs.llvm.org/show_bug.cgi?id=41045. llvm-objcopy assumed that
it could always read a section header string table. This isn't the case
when the sections were previously all stripped, and the e_shstrndx field
was set to 0. This patch fixes this. It also fixes a double space in an
error message relating to this issue, and prevents llvm-objcopy from
adding extra space for non-existent section headers, meaning that
--strip-sections on the output of a previous --strip-sections run
produces identical output, simplifying the test.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59989
llvm-svn: 357475
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=40007.
Idea is to swap the order of stripping. So that we strip sections before
symbols what allows us to strip relocation sections without emitting
the error about relative symbols.
Differential revision: https://reviews.llvm.org/D59763
llvm-svn: 357017
llvm-objcopy previously knew nothing about data in segments that wasn't
covered by section headers, meaning that it wrote zeroes instead of what
was there. As it is possible for this data to be useful to the loader,
this patch causes llvm-objcopy to start preserving this data. Data in
sections that are explicitly removed continues to be written as zeroes.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41005.
Reviewed by: jakehehrlich, rupprecht
Differential Revision: https://reviews.llvm.org/D59483
llvm-svn: 356919
Fix: r356853 + set AddressAlign to 4 in
Inputs/compress-debug-sections.yaml for the new group section introduced.
Original commit message:
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356856
This patch fixes the reason of ubsan failure (UB detected)
happened after landing the D59638 (I had to revert it).
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap-ubsan/builds/11760/steps/check-llvm%20ubsan/logs/stdio)
Problem is the following. Our implementation of GroupSection assumes that
its address is 4 bytes aligned when writes it:
template <class ELFT>
void ELFSectionWriter<ELFT>::visit(const GroupSection &Sec) {
ELF::Elf32_Word *Buf =
reinterpret_cast<ELF::Elf32_Word *>(Out.getBufferStart() + Sec.Offset);
...
But the test case for D59638 did not set AddressAlign in YAML. So address was
not 4 bytes aligned since Sec.Offset was odd. That triggered the issue.
This patch teaches llvm-objcopy to report an error for such sections (which should
not met in reality), what is better than having UB.
Differential revision: https://reviews.llvm.org/D59695
llvm-svn: 356853
Also fix up a couple of minor issues in the test being updated, where
FileCheck could match on incorrect output and fix the test case order to
match the struct order.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D59691
llvm-svn: 356746
Spec says about the first symbol table entry that index 0 both designates the first entry in the table
and serves as the undefined symbol index. It should have zero value.
Hence the first symbol table entry has no name. And so has to have a st_name == 0.
(http://refspecs.linuxbase.org/elf/gabi4+/ch4.symtab.html)
Currently, we do not emit zero value for the first symbol table entry.
That happens because we add empty strings to the string builder, which
for each such case adds a zero byte:
(https://github.com/llvm-mirror/llvm/blob/master/lib/MC/StringTableBuilder.cpp#L185)
After the string optimization performed it might return non zero indexes for the
empty string requested.
The patch fixes this issue for the case above and other sections with no names.
Differential revision: https://reviews.llvm.org/D59496
llvm-svn: 356739
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356738
GNU objcopy can support output formats like elf32-i386-freebsd and
elf64-x86-64-freebsd. The only difference from their regular non-freebsd
counterparts that I have observed is that the freebsd versions set the
OS/ABI field to ELFOSABI_FREEBSD. This patch sets the OS/ABI field
according based on the format whenever --output-format is specified.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59645
llvm-svn: 356737
If the compression was used and we had a symbol not involved in relocation,
we never updated its section and it was silently removed from the output.
Differential revision: https://reviews.llvm.org/D59542
llvm-svn: 356554
This fixes the https://bugs.llvm.org/show_bug.cgi?id=40980.
Previously if string optimization occurred as a result of
StringTableBuilder's finalize() method, the size wasn't updated.
This hopefully also makes the interaction between sections during finalization
processes a bit more clear.
Differential revision: https://reviews.llvm.org/D59488
llvm-svn: 356371
For ELF, we accept but ignore --only-keep-debug. Do the same for llvm-strip.
COFF does implement this, so update the test that it is supported.
llvm-svn: 356207
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
This is a reland of r356129, attempting to fix greendragon failures
due to a suspected compatibility issue with od on the greendragon bots
versus other versions.
llvm-svn: 356136
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
llvm-svn: 356129
error() was previously cleaned up from CopyConfig, but new uses were introduced.
This also tweaks the error message for --add-symbol to report all invalid flags.
llvm-svn: 356105
When --compress-debug-sections is given,
llvm-objcopy removes the uncompressed sections and adds compressed to the section list.
This makes all the pointers to old sections to be outdated.
Currently, code already has logic for replacing the target sections of the relocation
sections. But we also have to update the relocations by themselves.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40885.
Differential revision: https://reviews.llvm.org/D58960
llvm-svn: 355821
When --compress-debug-sections is given, llvm-objcopy do not compress
sections that have "ZLIB" header in data. Normally this signature is used
in zlib-gnu compression format. But if zlib-gnu used then the name of the compressed
section should start from .z* (e.g .zdebug_info). If it does not, then it is not
a zlib-gnu format and section should be treated as a normal uncompressed section.
Differential revision: https://reviews.llvm.org/D58908
llvm-svn: 355399
Summary:
This removes calls to `error()`/`reportError()` in the main driver (llvm-objcopy.cpp) as well as the associated argv-parsing (CopyConfig.cpp). `logAllUnhandledErrors()` is now the main way to print errors.
There are still a few uses from within the per-arch drivers, so we can't delete them yet... but almost!
Reviewers: jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, jakehehrlich, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58316
llvm-svn: 354600
Some triples in llvm-mc appear to be unavailable on some buildbots.
To please those buildbots we temporarily limit the test to darwin
(where the required triple is guranteed to be available)
until we find the right solution.
llvm-svn: 352950
This diff implements first bits for copying (without modification) MachO object files.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D54674
llvm-svn: 352944
Summary:
Include the symbol being defined in the list of requirements for using --localize-symbol.
This is used, for example, when someone is depending on two different projects that have the same (or close enough) method defined in each library, and using "-L sym" for a conflicting symbol in one of the libraries so that the definition from the other one is used. However, the library may have internal references to the symbol, which cause program crashes when those are used, i.e.:
```
$ cat foo.c
int foo() { return 5; }
$ cat bar.c
int foo();
int bar() { return 2 * foo(); }
$ cat foo2.c
int foo() { /* Safer implementation */ return 42; }
$ cat main.c
int bar();
int main() {
__builtin_printf("bar = %d\n", bar());
return 0;
}
$ ar rcs libfoo.a foo.o bar.o
$ ar rcs libfoo2.a foo2.o
# Picks the wrong foo() impl
$ clang main.o -lfoo -lfoo2 -L. -o main
# Picks the right foo() impl
$ objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
# Links somehow, but crashes at runtime
$ llvm-objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
```
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57417
llvm-svn: 352767
Summary:
This adds support for the --discard-locals flag, which acts similarly to --discard-all, except it only applies to compiler-generated symbols (i.e. symbols starting with `.L` in ELF).
I am not sure about COFF local symbols: those appear to also use `.L` in most cases, but also use just `L` in other cases, so for now I am just leaving it unimplemented there.
Fixes PR36160
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Reviewed By: jhenderson
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57248
llvm-svn: 352626
Summary: Do some more error cleanup, removing some dependencies from llvm-objcopy's error/reportError in [ELF/COFF]Objcopy methods.
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57423
llvm-svn: 352625
Summary:
--set-section-flags is used to change the section flags (e.g. SHF_ALLOC) for given sections. The flags allowed are the same from the existing --rename-section=.old=.new[,flags] feature.
Additionally, make sure that --set-section-flag cannot be used with --rename-section (either the source or destination), since --rename-section accepts flags. This avoids ambiguity for something like "--rename-section=.foo=.bar,alloc --set-section-flag=.bar,code".
Reviewers: jhenderson, jakehehrlich, alexshap, espindola
Reviewed By: jhenderson, jakehehrlich
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57198
llvm-svn: 352505
Summary: When using llvm-objcopy -O binary and the resulting file will be empty (e.g. removing the only section that would be written, or using --only-keep with a section that doesn't exist/isn't SHF_ALLOC), we crash because FileOutputBuffer expects Size > 0. Add a regression test, and change Buffer to open/truncate the output file in this case.
Reviewers: alexshap, jhenderson, jakehehrlich, espindola
Reviewed By: alexshap, jhenderson
Subscribers: jfb, llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D56806
llvm-svn: 352371
This change adds an option -g to llvm-objcopy which is an alias for the existing option --strip-debug.
This fixes PR40003.
Reviewed by: alexshap
Differential Revision: https://reviews.llvm.org/D57217
llvm-svn: 352182
The aux symbols were stored in an opaque std::vector<uint8_t>,
with contents interpreted according to the rest of the symbol.
All aux symbol types but one fit in 18 bytes (sizeof(coff_symbol16)),
and if written to a bigobj, two extra padding bytes are written (as
sizeof(coff_symbol32) is 20). In the storage agnostic intermediate
representation, store the aux symbols as a series of coff_symbol16
sized opaque blobs. (In practice, all such aux symbols only consist
of one aux symbol, so this is more flexible than what reality needs.)
The special case is the file aux symbols, which are written in
potentially more than one aux symbol slot, without any padding,
as one single long string. This can't be stored in the same opaque
vector of fixed sized aux symbol entries. The file aux symbols will
occupy a different number of aux symbol slots depending on the type
of output object file. As nothing in the intermediate process needs
to have accurate raw symbol indices, updating that is moved into the
writer class.
Differential Revision: https://reviews.llvm.org/D57009
llvm-svn: 351947
These are no longer necessary as the testcase now seems to run fine
on the buildbots that previously failed on this case, after SVN r351934.
llvm-svn: 351946
This was reverted since it broke a couple buildbots. The reason
for the breakage is not yet known, but this time, the test has
got more diagnostics added, to hopefully allow figuring out
what goes wrong.
Differential Revision: https://reviews.llvm.org/D57007
llvm-svn: 351931
Summary:
This patch changes a few methods to return Error instead of manually calling error/reportError to abort. This will make it easier to extract into a library.
Note that error() takes just a string (this patch also adds an overload that takes an Error), while reportError() takes string + [error/code]. To help unify things, use FileError to associate a given filename with an error. Note that this takes some special care (for now), e.g. calling reportError(FileName, <something that could be FileError>) will duplicate the filename. The goal is to eventually remove reportError() and have every error associated with a file to be a FileError, and just one error handling block at the tool level.
This change was suggested in D56806. I took it a little further than suggested, but completely fixing llvm-objcopy will take a couple more patches. If this approach looks good, I'll commit this and apply similar patche(s) for the rest.
This change is NFC in terms of non-error related code, although the error message changes in one context.
Reviewers: alexshap, jhenderson, jakehehrlich, mstorsjo, espindola
Reviewed By: alexshap, jhenderson
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D56930
llvm-svn: 351896
This was requested in the review of D57006.
Also add missing quotes around symbol names in error messages.
Differential Revision: https://reviews.llvm.org/D57014
llvm-svn: 351799
The debug directory contains the rwa file address of itself,
which is updated on write. Add a testcase for this existing
functionality.
Differential Revision: https://reviews.llvm.org/D56876
llvm-svn: 351659
Summary:
Fix llvm-objcopy to add .note sections as SHT_NOTEs. GNU objcopy overrides section flags for special sections. For `.note` sections (with the exception of `.note.GNU-stack`), SHT_NOTE is used.
Many other sections are special cased by libbfd, but `.note` is the only special section I can seem to find being used with objcopy --add-section.
See `.note` in context of the full list of special sections here: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob;f=bfd/elf.c;h=eb3e1828e9c651678b95a1dcbc3b124783d1d2be;hb=HEAD#l2675
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56570
llvm-svn: 351204
Summary:
As pointed out in D53667, our use of hyphens in flags can be inconsistent, mixing `-` with `--`. This change makes all long style flags use `--`.
Automatically changed via:
```
find test/tools/llvm-objcopy/ELF -type f | xargs sed -i 's/ -\([a-zA-Z]\{3\}\)/ --\1/g'
```
Two false positives were manually fixed/reverted.
Reviewers: jhenderson, espindola, alexshap
Reviewed By: jhenderson
Subscribers: emaste, javed.absar, arichardson, fedor.sergeev, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D56513
llvm-svn: 350944
Previously, this was broken - by setting PointerToSymbolTable to zero
but still actually writing the string table length, the object file
header was corrupted.
Differential Revision: https://reviews.llvm.org/D56584
llvm-svn: 350926
Summary:
The -O flag is currently being mostly ignored; it's only checked whether or not the output format is "binary". This adds support for a few formats (e.g. elf64-x86-64), so that when specified, the output can change between 32/64 bit and sizes/alignments are updated accordingly.
This fixes PR39135
Reviewers: jakehehrlich, jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53667
llvm-svn: 350541
Summary:
Fix EntrySize, Size, and Align before doing layout calculation.
As a side cleanup, this removes a dependence on sizeof(Elf_Sym) within BinaryReader, so we can untemplatize that.
This unblocks a cleaner implementation of handling the -O<format> flag. See D53667 for a previous attempt. Actual implementation of the -O<format> flag will come in an upcoming commit, this is largely a NFC (although not _totally_ one, because alignment on binary input was actually wrong before).
Reviewers: jakehehrlich, jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56211
llvm-svn: 350336
This is an initial implementation of no-op passthrough copying of COFF
with objcopy.
Differential Revision: https://reviews.llvm.org/D54939
llvm-svn: 349605
I just hard core goofed when I wrote this and created a different name
for no good reason. I'm failry aware of most "fresh" users of llvm-objcopy
(that is, users which are not using it as a drop in replacement for GNU
objcopy) and can say that only "-j" is being used by such people so this
patch should strictly increase compatibility and not remove it.
Differential Revision: https://reviews.llvm.org/D52180
llvm-svn: 348446
Split timestamp preservation tests into atime and mtime test, and skip
the former on NetBSD. When the filesystem is mounted noatime, NetBSD
not only inhibits implicit atime updates but also prevents setting atime
via utime(), causing the test to fail.
Differential Revision: https://reviews.llvm.org/D55271
llvm-svn: 348354
This flag does not exist in GNU objcopy but has a major use case.
Debugging tools support the .build-id directory structure to find
debug binaries. There is no easy way to build this structure up
however. One way to do it is by using llvm-readelf and some crazy
shell magic. This implements the feature directly. It is most often
the case that you'll want to strip a file and send the original to
the .build-id directory but if you just want to send a file to the
.build-id directory you can copy to /dev/null instead.
Differential Revision: https://reviews.llvm.org/D54384
llvm-svn: 348174
In this diff the elf-specific tests are moved into the subfolder llvm-objcopy/ELF
(the change was discussed in the comments on https://reviews.llvm.org/D54674).
A separate code reivew wasn't sent for this change
since Phabricator is failing to create such a large diff.
Test plan:
make check-all
make check-llvm-tools
make check-llvm-tools-llvm-objcopy
llvm-svn: 347958
This allows libtool to detect the presence of llvm-strip and use
it with the options --strip-debug and --strip-unneeded.
Also hook up the -V alias for objcopy.
Differential Revision: https://reviews.llvm.org/D54936
llvm-svn: 347731
Summary:
llvm-objcopy/strip support `--keep` (for sections) and `--keep-symbols` (for symbols). For consistency and clarity, rename `--keep` to `--keep-section`.
In fact, for GNU compatability, -K is --keep-symbol, so it's weird that the alias `-K` is not the same as the short-ish `--keep`.
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, MaskRay
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D54477
llvm-svn: 346782
Summary: ar and objcopy/strip all support configuring whether archives are written deterministically (timestamps/UIDs/GIDs/etc zero'd). This has been ported to llvm-ar (the U/D modifiers) but not yet to llvm-objcopy/strip.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Subscribers: ruiu, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D53913
llvm-svn: 345859
Summary:
--localize-symbol and --localize-hidden will currently localize common symbols. GNU objcopy will not localize these symbols even when explicitly requested, which seems reasonable; common symbols should always be global so they can be merged during linking.
See PR39461
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, jhenderson, alexshap, MaskRay
Subscribers: emaste, arichardson, alexshap, MaskRay, llvm-commits
Differential Revision: https://reviews.llvm.org/D53782
llvm-svn: 345856
Summary: --keep-global-symbol and --globalize-symbol don't make sense for undefined symbols, so it should be ignored for those symbols. This matches GNU objcopy behavior.
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Reviewed By: jhenderson, jakehehrlich
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53733
llvm-svn: 345614
Summary:
GNU strip supports both `-s` and `-S` as aliases for `--strip-all` and `--strip-debug`, respectfully.
As part of this, it turns out that strip/objcopy were accepting case insensitive command line args. I'm not sure if there was an explicit reason for this. The only others uses of this are llvm-cvtres/llvm-mt/llvm-lib, which are all tools specific for windows support. Forcing case sensitivity allows both aliases to exist, but seems like a good idea anyway.
And as a surprise test case adjustment, the llvm-strip unit test was running with `-keep=unavailable_symbol`, despite `keep` not be a valid flag for strip. This is because there is a flag `-K` which, when case insensitivity is permitted, allows it to be interpreted as `-K` = `eep=unavailable_symbol` (e.g. to allow `-Kfoo` == `--keep-symbol=foo`).
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jakehehrlich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53163
llvm-svn: 345068
Summary:
This change adds support for the GNU --target flag, which sets both --input-target and --output-target.
GNU objcopy doesn't do any checking for whether both --target and --{input,output}-target are used, and so it allows both, e.g. "--target A --output-target B" is equivalent to "--input-target A --output-target B" since the later command line flag would override earlier ones. This may be error prone, so I chose to implement it as an error if both are used. I'm not sure if anyone is actually using both.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53029
llvm-svn: 344321
Summary: I had added support for compressing dwarf sections in a prior commit,
this one adds support for decompressing. Usage is:
llvm-objcopy --decompress-debug-sections input.o output.o
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D51841
llvm-svn: 343451
Summary:
Implement --version for objcopy and strip.
I think there are LLVM utilities that automatically handle this, but that doesn't seem to work with custom parsing since this binary handles both objcopy and strip, so it uses custom parsing.
This fixes PR38298
Reviewers: jhenderson, alexshap, jakehehrlich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52328
llvm-svn: 342702
This diff adds -S as an alias for --strip-all-gnu
(for compatibility with binutils' objcopy).
Patch by Dmitry Golovin!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D52163
llvm-svn: 342364
Submitted on behalf of Armando Montanez (amontanez@google.com).
Objects with unused program headers copied by objcopy would always have
nonzero values for program header offset and program header entry size.
While technically valid, this atypical behavior triggers warnings in some
tools. This change sets the two fields to zero when the program header is
unused, better fitting the general expectations for unused program header
data.
Section headers behaved somewhat similarly (though only with the entry size),
and are fixed in this revision as well.
Differential Revision: https://reviews.llvm.org/D51961
llvm-svn: 342065
Third Attempt:
- Alignment issues resolved.
- zlib::isAvailable() detected.
- ArrayRef misuse fixed.
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341635
Second Attempt. Alignment issues resolved. zlib::isAvailable() detected.
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341607
Summary:
Allow strip to be called on multiple input files, which is interpreted as stripping N files in place. Using multiple input files is incompatible with -o.
To allow this, create a `DriverConfig` struct which just wraps a list of `CopyConfigs`. objcopy will only ever have a single `CopyConfig`, but strip will have N (where N >= 1) CopyConfigs.
Reviewers: alexshap, jakehehrlich
Reviewed By: alexshap, jakehehrlich
Subscribers: MaskRay, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D51660
llvm-svn: 341464
Summary:
Fixes the error "Link field value 0 in section .rela.plt is invalid" when copying/stripping certain binaries. Minimal repro:
```
$ cat /tmp/a.c
int main() { return 0; }
$ clang -static /tmp/a.c -o /tmp/a
$ llvm-strip /tmp/a -o /tmp/b
llvm-strip: error: Link field value 0 in section .rela.plt is invalid.
```
Reviewers: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51493
llvm-svn: 341419
James Henderson