I have disabled some attribute subject lines on purpose in Attr.td;
this part is a WIP with the goal being to restore those subjects
incrementally. By commenting them out, it leaves the original behavior
the same as before for those attributes and so those are not
functionality changes.
llvm-svn: 195841
look at the attribute spelling instead. The 'ownership_*' attributes should
probably be split into separate *Attr classes, but that's more than I wanted to
do here.
llvm-svn: 195805
This is still an experimental attribute, but I wanted it in tree
for review. It may still get yanked.
This attribute can only be applied to a class @interface, not
a class extension or category. It does not change the type
system rules for Objective-C, but rather the implementation checking
for Objective-C classes that explicitly conform to a protocol.
During protocol conformance checking, clang recursively searches
up the class hierarchy for the set of methods that compose
a protocol. This attribute will cause the compiler to not consider
the methods contributed by a super class, its categories, and those
from its ancestor classes. Thus this attribute is used to force
subclasses to redeclare (and hopefully re-implement) methods if
they decide to explicitly conform to a protocol where some of those
methods may be provided by a super class.
This attribute intentionally leaves out properties, which are associated
with state. This attribute only considers methods (at least right now)
that are non-property accessors. These represent methods that "do something"
as dictated by the protocol. This may be further refined, and this
should be considered a WIP until documentation gets written or this
gets removed.
llvm-svn: 195533
whose semantic is currently identical to objc_bridge,
but their differences may manifest down the road with
further enhancements. // rdar://15498044
llvm-svn: 195376
After implementing this patch, a few concerns about the language
feature itself emerged in my head that I had previously not considered.
I want to resolve those design concerns first before having
a half-designed language feature in the tree.
llvm-svn: 195328
The idea is to allow a class to stipulate that its methods (and those
of its parents) cannot be used for protocol conformance in a subclass.
A subclass is then explicitly required to re-implement those methods
of they are present in the class marked with this attribute.
Currently the attribute can only be applied to an @interface, and
not a category or class extension. This is by design. Unlike
protocol conformance, where a category can add explicit conformance
of a protocol to class, this anti-conformance really needs to be
observed uniformly by all clients of the class. That's because
the absence of the attribute implies more permissive checking of
protocol conformance.
This unfortunately required changing method lookup in ObjCInterfaceDecl
to take an optional protocol parameter. This should not slow down
method lookup in most cases, and is just used for protocol conformance.
llvm-svn: 195323
into a separate "parse an attribute that takes a type argument" codepath. This
results in both codepaths being a lot cleaner and simpler, and fixes some bugs
where the type argument handling bled into the expression argument handling and
caused us to both accept invalid and reject valid attribute arguments.
llvm-svn: 193731
This reverts commit r193161.
It broke
void foo() __attribute__((alias("bar")));
void bar() {}
void zed() __attribute__((alias("foo")));
Looks like we have to fix pr17639 first :-(
llvm-svn: 193162
names. For example, with this patch we now reject
void f1(void) __attribute__((alias("g1")));
This patch is implemented in CodeGen. It is quiet a bit simpler and more
compatible with gcc than implementing it in Sema. The downside is that the
errors only fire during -emit-llvm.
llvm-svn: 193161
ResolveSingleFunctionTemplateSpecialization() returns 0 and doesn't emit diags
unless the expression has template-ids, so we must null check the result.
Also add a better diag noting which overloads are causing the problem.
Reviewed by Aaron Ballman.
llvm-svn: 193055
to be treated as return values, and marked with the "returned_typestate"
attribute. Patch by chris.wailes@gmail.com; reviewed by delesley@google.com.
llvm-svn: 192932
that a function can be called in. This reduced the total number of annotations
needed and makes writing more complicated behaviour less burdensome.
Patch by chriswails@gmail.com.
llvm-svn: 191983
This attribute allows users to use a modified C or C++ function as an ARM
exception-handling function and, with care, to successfully return control to
user-space after the issue has been dealt with.
rdar://problem/14207019
llvm-svn: 191769
of ObjectiveC properties to mean annotation of
NS_RETURNS_INNER_POINTER on its synthesized getter.
This also facilitates more migration to properties when
methods are annotated with NS_RETURNS_INNER_POINTER.
// rdar://14990439
llvm-svn: 191009
Fix for PR16752. Second commit.
PR16752: 'mode' attribute for unusual targets doesn't work properly
Description:
Troubles could be happened due to some assumptions in handleModeAttr function (see SemaDeclAttr.cpp).
For example, it assumes that 32 bit integer is 'int', while it could be 16 bit only.
Instead of asking target: 'which type do you want to use for int32_t ?' it just hardcodes general opinion. That doesn't looks pretty correct.
Please consider the next solution:
1. In Basic/TargetInfo add getIntTypeByWidth and getRealTypeByWidth methods. Methods asks target for proper type for given bit width.
2. Fix handleModeAttr according to new methods in TargetInfo.
Fixes:
1st Commit (Done): Add new methods for TargetInfo:
getRealTypeByWidth and getIntTypeByWidth
for ASTContext names are almost same(invokes new methods from TargetInfo):
getIntTypeForBitwidth and getRealTypeForBitwidth
2nd Commit (Current): Fix SemaDeclAttr, handleModeAttr function.
Also test/Sema/attr-mode.c was fixed. 'XC' mode test was disabled for PPC64 machines.
llvm-svn: 190926
This fixes a couple of latent crashes for invalid attributes and also adds a
fixit hint to turn identifiers into string literals if one was expected. It then
proceeds recovery as if the identifier was a literal. Diagnostic locations are
also changed to point at the literal instead of the attribute if the error
concerns the argument. PR17175.
For example:
hidden.c:1:40: error: 'visibility' attribute requires a string
extern int x __attribute__((visibility(hidden)));
^
" "
hidden.c:2:29: error: visibility does not match previous declaration
extern int x __attribute__((visibility("default")));
^
hidden.c:1:29: note: previous attribute is here
extern int x __attribute__((visibility(hidden)));
^
llvm-svn: 190699
PR16752: 'mode' attribute for unusual targets doesn't work properly
Description:
Troubles could be happened due to some assumptions in handleModeAttr function (see SemaDeclAttr.cpp).
For example, it assumes that 32 bit integer is 'int', while it could be 16 bit only.
Instead of asking target: 'which type do you want to use for int32_t ?' it just hardcodes general opinion. That doesn't looks pretty correct.
Please consider the next solution:
1. In Basic/TargetInfo add getIntTypeByWidth and getRealTypeByWidth methods. Methods asks target for proper type for given bit width.
2. Fix handleModeAttr according to new methods in TargetInfo.
Fixes:
1st Commit (Done): Add new methods for TargetInfo:
getRealTypeByWidth and getIntTypeByWidth
for ASTContext names are almost same(invokes new methods from TargetInfo):
getIntTypeForBitwidth and getRealTypeForBitwidth
2nd Commit (Current): Fix SemaDeclAttr, handleModeAttr function.
llvm-svn: 190391
This information is used for return states and pass-by-value parameter
states.
Patch by Chris Wailes.
Review by DeLesley Hutchins and Aaron Ballman.
llvm-svn: 190116
Patch by chris.wailes@gmail.com
Functions can now declare what state the consumable type the are returning will
be in. This is then used on the caller side and checked on the callee side.
Constructors now use this attribute instead of the 'consumes' attribute.
llvm-svn: 189843
Patch by chris.wailes@gmail.com
Adds the 'consumable' attribute that can be attached to classes. This replaces
the previous method of scanning a class's methods to see if any of them have
consumed analysis attributes attached to them. If consumed analysis attributes
are attached to methods of a class that isn't marked 'consumable' a warning
is generated.
llvm-svn: 189702
Reviewed by delesley, dblaikie.
Add the annotations and code needed to support a basic 'consumed' analysis.
Summary:
This new analysis is based on academic literature on linear types. It tracks
the state of a value, either as unconsumed, consumed, or unknown. Methods are
then annotated as CallableWhenUnconsumed, and when an annotated method is
called while the value is in the 'consumed' state a warning is issued. A value
may be tested in the conditional statement of an if-statement; when this occurs
we know the state of the value in the different branches, and this information
is added to our analysis. The code is still highly experimental, and the names
of annotations or the algorithm may be subject to change.
llvm-svn: 188206
Make sure we can properly generate code when the UUID has curly braces
on it, strip the curly braces at the sema layer.
This fixes PR16813.
llvm-svn: 188061
Aaron Ballman