This reverts commit 61ba1481e2.
I'm reverting this because it breaks the lldb build with
incomplete switch coverage warnings. I would fix it forward,
but am not familiar enough with lldb to determine the correct
fix.
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:3958:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4633:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4889:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
Introduction/Motivation:
LLVM-IR supports integers of non-power-of-2 bitwidth, in the iN syntax.
Integers of non-power-of-two aren't particularly interesting or useful
on most hardware, so much so that no language in Clang has been
motivated to expose it before.
However, in the case of FPGA hardware normal integer types where the
full bitwidth isn't used, is extremely wasteful and has severe
performance/space concerns. Because of this, Intel has introduced this
functionality in the High Level Synthesis compiler[0]
under the name "Arbitrary Precision Integer" (ap_int for short). This
has been extremely useful and effective for our users, permitting them
to optimize their storage and operation space on an architecture where
both can be extremely expensive.
We are proposing upstreaming a more palatable version of this to the
community, in the form of this proposal and accompanying patch. We are
proposing the syntax _ExtInt(N). We intend to propose this to the WG14
committee[1], and the underscore-capital seems like the active direction
for a WG14 paper's acceptance. An alternative that Richard Smith
suggested on the initial review was __int(N), however we believe that
is much less acceptable by WG14. We considered _Int, however _Int is
used as an identifier in libstdc++ and there is no good way to fall
back to an identifier (since _Int(5) is indistinguishable from an
unnamed initializer of a template type named _Int).
[0]https://www.intel.com/content/www/us/en/software/programmable/quartus-prime/hls-compiler.html)
[1]http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2472.pdf
Differential Revision: https://reviews.llvm.org/D73967
Summary:
We can simplify the LHSTy correction for
fixed-point compassign by moving it below
the point where we know we have a compound
assignment.
Also, we shouldn't look at the LHS and RHS
separately; look at the computation result
type instead.
Looking at the LHS and RHS is also wrong
for compassigns with fixed and floating
point (though this does not work upstream
yet).
Reviewers: leonardchan
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D78294
Summary:
Previously, we treated CXXUuidofExpr as quite a special case: it was the
only kind of expression that could be a canonical template argument, it
could be a constant lvalue base object, and so on. In addition, we
represented the UUID value as a string, whose source form we did not
preserve faithfully, and that we partially parsed in multiple different
places.
With this patch, we create an MSGuidDecl object to represent the
implicit object of type 'struct _GUID' created by a UuidAttr. Each
UuidAttr holds a pointer to its 'struct _GUID' and its original
(as-written) UUID string. A non-value-dependent CXXUuidofExpr behaves
like a DeclRefExpr denoting that MSGuidDecl object. We cache an APValue
representation of the GUID on the MSGuidDecl and use it from constant
evaluation where needed.
This allows removing a lot of the special-case logic to handle these
expressions. Unfortunately, many parts of Clang assume there are only
a couple of interesting kinds of ValueDecl, so the total amount of
special-case logic is not really reduced very much.
This fixes a few bugs and issues:
* PR38490: we now support reading from GUID objects returned from
__uuidof during constant evaluation.
* Our Itanium mangling for a non-instantiation-dependent template
argument involving __uuidof no longer depends on which CXXUuidofExpr
template argument we happened to see first.
* We now predeclare ::_GUID, and permit use of __uuidof without
any header inclusion, better matching MSVC's behavior. We do not
predefine ::__s_GUID, though; that seems like a step too far.
* Our IR representation for GUID constants now uses the correct IR type
wherever possible. We will still fall back to using the
{i32, i16, i16, [8 x i8]}
layout if a definition of struct _GUID is not available. This is not
ideal: in principle the two layouts could have different padding.
Reviewers: rnk, jdoerfert
Subscribers: arphaman, cfe-commits, aeubanks
Tags: #clang
Differential Revision: https://reviews.llvm.org/D78171
In the MS C++ ABI, the complete destructor variant for a class with
virtual bases is emitted whereever it is needed, instead of directly
alongside the base destructor variant. The complete destructor calls the
base destructor of the current class and the base destructors of each
virtual base. In order for this to work reliably, translation units that
use the destructor of a class also need to mark destructors of virtual
bases of that class used.
Fixes PR38521
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D77081
Now compiler defines 5 sets of constants to represent rounding mode.
These are:
1. `llvm::APFloatBase::roundingMode`. It specifies all 5 rounding modes
defined by IEEE-754 and is used in `APFloat` implementation.
2. `clang::LangOptions::FPRoundingModeKind`. It specifies 4 of 5 IEEE-754
rounding modes and a special value for dynamic rounding mode. It is used
in clang frontend.
3. `llvm::fp::RoundingMode`. Defines the same values as
`clang::LangOptions::FPRoundingModeKind` but in different order. It is
used to specify rounding mode in in IR and functions that operate IR.
4. Rounding mode representation used by `FLT_ROUNDS` (C11, 5.2.4.2.2p7).
Besides constants for rounding mode it also uses a special value to
indicate error. It is convenient to use in intrinsic functions, as it
represents platform-independent representation for rounding mode. In this
role it is used in some pending patches.
5. Values like `FE_DOWNWARD` and other, which specify rounding mode in
library calls `fesetround` and `fegetround`. Often they represent bits
of some control register, so they are target-dependent. The same names
(not values) and a special name `FE_DYNAMIC` are used in
`#pragma STDC FENV_ROUND`.
The first 4 sets of constants are target independent and could have the
same numerical representation. It would simplify conversion between the
representations. Also now `clang::LangOptions::FPRoundingModeKind` and
`llvm::fp::RoundingMode` do not contain the value for IEEE-754 rounding
direction `roundTiesToAway`, although it is supported natively on
some targets.
This change defines all the rounding mode type via one `llvm::RoundingMode`,
which also contains rounding mode for IEEE rounding direction `roundTiesToAway`.
Differential Revision: https://reviews.llvm.org/D77379
Implemented codegen for the iterator expression in the depend clauses.
Iterator construct is emitted the following way:
iterator(cnt1, cnt2, ...), in : <dep>
<TotalNumDeps> = <cnt1_size> * <cnt2_size> * ...;
kmp_depend_t deps[<TotalNumDeps>];
deps_counter = 0;
for (cnt1) {
for (cnt2) {
...
deps[deps_counter].base_addr = &<dep>;
deps[deps_counter].size = sizeof(<dep>);
deps[deps_counter].flags = in;
deps_counter += 1;
...
}
}
For depobj construct the codegen is very similar, but the memory is
allocated dynamically and added extra first item reserved for internal use.
WG14 has adopted N2480 (http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2480.pdf)
into C2x at the meetings last week, allowing parameter names of a function
definition to be elided. This patch relaxes the error so that C++ and C2x do not
diagnose this situation, and modes before C2x will allow it as an extension.
This also adds the same feature to ObjC blocks under the assumption that ObjC
wishes to follow the C standard in this regard.
constructor with default arguments.
We used to try to rebuild the call as a call to the faked-up inherited
constructor, which is only a placeholder and lacks (for example) default
arguments. Instead, build the call by reference to the original
constructor.
In passing, add a note to say where a call that recursively uses a
default argument from within itself occurs. This is usually pretty
obvious, but still at least somewhat useful, and would have saved
significant debugging time for this particular bug.
Summary:
Added basic representation and parsing/sema handling of array-shaping
operations. Array shaping expression is an expression of form ([s0]..[sn])base,
where s0, ..., sn must be a positive integer, base - a pointer. This
expression is a kind of cast operation that converts pointer expression
into an array-like kind of expression.
Reviewers: rjmccall, rsmith, jdoerfert
Subscribers: guansong, arphaman, cfe-commits, caomhin, kkwli0
Tags: #clang
Differential Revision: https://reviews.llvm.org/D74144
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
This reverts commit 0788acbccb.
This reverts commit c2d7a1f79cedfc9fcb518596aa839da4de0adb69: Revert "[clangd] Add test for FindTarget+RecoveryExpr (which already works). NFC"
It causes a crash on invalid code:
class X {
decltype(unresolved()) foo;
};
constexpr int s = sizeof(X);
As reported in PR45298 and PR45299, vector_size type checking would
crash when done in a situation where the scalar is dependent, such as
a member of the current instantiation.
This is because the scalar checking ensures that you can implicitly
convert a value to a vector-type as long as it doesn't require
truncation. It does this by using the constant evaluator to get the
value as a float. Unfortunately, if the scalar is dependent (such as a
member of the current instantiation), we would hit the assert in the
evaluator.
This patch suppresses the truncation- of-value check in the first phase
of translation. All values are properly errored upon instantiation. This
has one minor regression, in that previously in a non-asserts build,
template<typename T>
struct S {
float4 f(float4 f) {
return k + f;
}
static constexpr k = 1.1; // causes a truncation on conversion.
};
would error immediately. Because 'k' is value dependent (as a
member-of-the-current-instantiation), this would still be evaluatable
(despite normally asserting). Due to this patch, this diagnostic is
delayed until instantiation time.
In order to support non-user-named kernels, SYCL needs some way in the
integration headers to name the kernel object themselves. Initially, the
design considered just RTTI naming of the lambdas, this results in a
quite unstable situation in light of some device/host macros.
Additionally, this ends up needing to use RTTI, which is a burden on the
implementation and typically unsupported.
Instead, we've introduced a builtin, __builtin_unique_stable_name, which
takes a type or expression, and results in a constexpr constant
character array that uniquely represents the type (or type of the
expression) being passed to it.
The implementation accomplishes that simply by using a slightly modified
version of the Itanium Mangling. The one exception is when mangling
lambdas, instead of appending the index of the lambda in the function,
it appends the macro-expansion back-trace of the lambda itself in the
form LINE->COL[~LINE->COL...].
Differential Revision: https://reviews.llvm.org/D76620
When compiling C, a ?: between two values of the same SVE type
currently gives an error such as:
incompatible operand types ('svint8_t' (aka '__SVInt8_t') and 'svint8_t')
It's supposed to be valid to select between (cv-qualified versions of)
the same SVE type, so this patch adds that case.
These expressions already work for C++ and are tested by
SemaCXX/sizeless-1.cpp.
Differential Revision: https://reviews.llvm.org/D76693
Normally clang avoids creating expressions when it encounters semantic
errors, even if the parser knows which expression to produce.
This works well for the compiler. However, this is not ideal for
source-level tools that have to deal with broken code, e.g. clangd is
not able to provide navigation features even for names that compiler
knows how to resolve.
The new RecoveryExpr aims to capture the minimal set of information
useful for the tools that need to deal with incorrect code:
source range of the expression being dropped,
subexpressions of the expression.
We aim to make constructing RecoveryExprs as simple as possible to
ensure writing code to avoid dropping expressions is easy.
Producing RecoveryExprs can result in new code paths being taken in the
frontend. In particular, clang can produce some new diagnostics now and
we aim to suppress bogus ones based on Expr::containsErrors.
We deliberately produce RecoveryExprs only in the parser for now to
minimize the code affected by this patch. Producing RecoveryExprs in
Sema potentially allows to preserve more information (e.g. type of an
expression), but also results in more code being affected. E.g.
SFINAE checks will have to take presence of RecoveryExprs into account.
Initial implementation only works in C++ mode, as it relies on compiler
postponing diagnostics on dependent expressions. C and ObjC often do not
do this, so they require more work to make sure we do not produce too
many bogus diagnostics on the new expressions.
See documentation of RecoveryExpr for more details.
original patch from Ilya
This change is based on https://reviews.llvm.org/D61722
Reviewers: sammccall, rsmith
Reviewed By: sammccall, rsmith
Tags: #clang
Differential Revision: https://reviews.llvm.org/D69330
Summary:
Changes:
- handle immediate invocations for constructors.
- add tests
after this patch i believe the implementation of consteval is nearly standard compliant, but IR-gen still needs to be taught not to emit consteval declarations.
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: wchilders
Differential Revision: https://reviews.llvm.org/D74007
This patch completes a trio of changes related to arrays of
sizeless types. It rejects various forms of arithmetic on
pointers to sizeless types, in the same way as for other
incomplete types.
Differential Revision: https://reviews.llvm.org/D76086
clang currently accepts:
__SVInt8_t &foo1(__SVInt8_t *x) { return *x; }
__SVInt8_t &foo2(__SVInt8_t *x) { return x[1]; }
The first function is valid ACLE code and generates correct LLVM IR
(and assembly code). But the second function is invalid for the
same reason that arrays of sizeless types are. Trying to code-generate
the function leads to:
llvm/include/llvm/Support/TypeSize.h:126: uint64_t llvm::TypeSize::getFixedSize() const: Assertion `!IsScalable && "Request for a fixed size on a s
calable object"' failed.
Another problem is that:
template<typename T>
constexpr __SIZE_TYPE__ f(T *x) { return &x[1] - x; }
typedef int arr1[f((int *)0) - 1];
typedef int arr2[f((__SVInt8_t *)0) - 1];
produces:
a.cpp:2:48: warning: subtraction of pointers to type '__SVInt8_t' of zero size has undefined behavior [-Wpointer-arith]
constexpr __SIZE_TYPE__ f(T *x) { return &x[1] - x; }
~~~~~ ^ ~
a.cpp:4:18: note: in instantiation of function template specialization 'f<__SVInt8_t>' requested here
typedef int arr2[f((__SVInt8_t *)0) - 1];
This patch reports an appropriate diagnostic instead.
Differential Revision: https://reviews.llvm.org/D76084
To group the code in one place, simplify it and make it easier to add
the containsErrors bit and find existing bugs.
Reviewers: sammccall
Reviewed By: sammccall
Tags: #clang
Differential Revision: https://reviews.llvm.org/D73638
Avoid copying of the orignal variable if it is going to be marked as
firstprivate in task regions. For taskloops, still need to copy the
non-trvially copyable variables to correctly construct them upon task
creation.
This reapplies the following patch, which was reverted because it caused
neon CodeGen tests to fail:
https://reviews.llvm.org/rGa6150b48cea00ab31e9335cc73770327acc4cb3a
I've added checks to detect half precision neon vectors and avoid
promiting them to vectors of floats.
See the discussion here: https://reviews.llvm.org/rG825235c140e7
Original commit message:
This fixes an assertion in Sema::CreateBuiltinBinOp that fails when one
of the vector operand's element type is a typedef of __fp16.
rdar://problem/55983556
The SVE ACLE doesn't allow arrays of sizeless types. At the moment
clang accepts the TU:
__SVInt8_t x[2];
but trying to code-generate it triggers the LLVM assertion:
llvm/lib/IR/Type.cpp:588: static llvm::ArrayType* llvm::ArrayType::get(llvm::Type*, uint64_t): Assertion `isValidElementType(ElementType) && "Invalid type for array element!"' failed.
This patch reports an appropriate error instead.
The rules are slightly more restrictive than for general incomplete types.
For example:
struct s;
typedef struct s arr[2];
is valid as far as it goes, whereas arrays of sizeless types are
invalid in all contexts. BuildArrayType therefore needs a specific
check for isSizelessType in addition to the usual handling of
incomplete types.
Differential Revision: https://reviews.llvm.org/D76082
Since fields can't have sizeless type, it also doesn't make sense
to capture sizeless types by value in lambda expressions. This patch
makes sure that we diagnose that and that we use "sizeless type" rather
"incomplete type" in the associated message. (Both are correct, but
"sizeless type" is more specific and hopefully more user-friendly.)
Differential Revision: https://reviews.llvm.org/D75738
clang current accepts:
void foo1(__SVInt8_t *x, __SVInt8_t *y) { *x = *y; }
void foo2(__SVInt8_t *x, __SVInt8_t *y) {
memcpy(y, x, sizeof(__SVInt8_t));
}
The first function is valid ACLE code and generates correct LLVM IR.
However, the second function is invalid ACLE code and generates a
zero-length memcpy. The point of this patch is to reject the use
of sizeof in the second case instead.
There's no similar wrong-code bug for alignof. However, the SVE ACLE
conservatively treats alignof in the same way as sizeof, just as the
C++ standard does for incomplete types. The idea is that layout of
sizeless types is an implementation property and isn't defined at
the language level.
Implementation-wise, the patch adds a new CompleteTypeKind enum
that controls whether RequireCompleteType & friends accept sizeless
built-in types. For now the default is to maintain the status quo
and accept sizeless types. However, the end of the series will flip
the default and remove the Default enum value.
The patch also adds new ...CompleteSized... wrappers that callers can
use if they explicitly want to reject sizeless types. The callers then
use diagnostics that have an extra 0/1 parameter to indicats whether
the type is sizeless or not.
The idea is to have three cases:
1. calls that explicitly reject sizeless types, with a tweaked diagnostic
for the sizeless case
2. calls that explicitly allow sizeless types
3. normal/old-style calls that don't make an explicit choice either way
Once the default is flipped, the 3. calls will conservatively reject
sizeless types, using the same diagnostic as for other incomplete types.
Differential Revision: https://reviews.llvm.org/D75572
a dependent context.
This matches the GCC behavior.
We track the enclosing template depth when determining whether a
statement expression is within a dependent context; there doesn't appear
to be any other reliable way to determine this.
We previously assumed they were neither value- nor
instantiation-dependent under any circumstances, which would lead to
crashes and other misbehavior.
Fix a bug in IRGen where it wasn't destructing compound literals in C
that are ObjC pointer arrays or non-trivial structs. Also diagnose jumps
that enter or exit the lifetime of the compound literals.
rdar://problem/51867864
Differential Revision: https://reviews.llvm.org/D64464