Summary:
When using source maps for a breakpoint, in order to find the actual source that breakpoint has resolved, we
need to use a query similar to what CommandObjectSource::DumpLinesInSymbolContexts does, which is the logic
used by the CLI to display the source line at a given breakpoint. That's necessary because from a breakpoint
location you only have an address, which points to the original source location, not the source mapped one.
in the setBreakpoints request handler, we haven't been doing such query and we were returning the original
source location, which was breaking the UX of VSCode, as many breakpoints were being set but not displayed
in the source file next to each line. Besides, clicking the source path of a breakpoint in the breakpoints
view in the debug tab was not working for this case, as VSCode was trying to open a non-existent file, thus
showing an error to the user.
Ideally, we should do the query mentioned above to find the actual source location to respond to the IDE,
however, that query is expensive and users can have an arbitrary number of breakpoints set. As a simpler fix,
the request sent by VSCode already contains the full source path, which exists because the user set it from
the IDE itself, so we can simply reuse it instead of querying from the SB API.
I wrote a test for this, and found out that I had to move SetSourceMapFromArguments after RunInitCommands in
lldb-vscode.cpp, because an init command used in all tests is `settings clear -all`, which would clear the
source map unless specified after initCommands. And in any case, I think it makes sense to have initCommands
run before anything the debugger would do.
Reviewers: clayborg, kusmour, labath, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76968
Summary:
If no custom launching is used, lldb-vscode launches a program with an empty environment by default. In some scenarios, the user might want to simply use the same environment as the IDE to have a set of working environment variables (e.g. PATH wouldn't be empty). In fact, most DAPs in VSCode have this behavior by default. In other cases the user definitely needs to set their custom environment, which is already supported. To make the first case easier for the user (e.g. not having to copy the PATH to the launch.json every time they want to debug simple programs that rely on PATH), a new option is now offered. inheritEnvironment will launch the program copying its own environment, and it's just a boolean flag.
{F11347695}
Reviewers: clayborg, aadsm, diazhector98, kusmour
Subscribers: labath, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74636
A couple of tests sporadically fail on these assertions, but the error
messages do not give a clue as to what has actually happened.
Improve them so that we can better understand what is going wrong.
Summary:
Requesting registers one by one takes a while in our project.
We want to get rid of it by using target.xml.
Reviewers: jarin, labath, omjavaid
Reviewed By: labath, omjavaid
Subscribers: omjavaid, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74217
Summary:
Synthesize target.xml in lldb-server to avoid a long chain of
qRegisterInfo packets, which can be slow over low-latency links.
Reviewers: jarin, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74217
Summary:
This patch fixes logging to log incoming packets which was removed during a refactor.
We also enable logging to a "vscode.txt" file for each lldb-vscode test by creating the log file in the build artifacts directory for each test. This allows users to see the packets for their tests if needed and the log file is in a directory that will be removed after tests have been run.
Reviewers: labath, aadsm, serhiy.redko, jankratochvil, xiaobai, wallace
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74566
Summary: The VS Code DAP expects on response for each breakpoint that was requested. If we responsd with multiple entries for one breakpoint the VS Code UI gets out of date. Currently the VS code DAP doesn't handle one breakpoint with multiple locations. If this ever gets fixed we can modify our code.
Reviewers: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73665
Summary: Moves lldbsuite tests to lldb/test/API.
This is a largely mechanical change, moved with the following steps:
```
rm lldb/test/API/testcases
mkdir -p lldb/test/API/{test_runner/test,tools/lldb-{server,vscode}}
mv lldb/packages/Python/lldbsuite/test/test_runner/test lldb/test/API/test_runner
for d in $(find lldb/packages/Python/lldbsuite/test/* -maxdepth 0 -type d | egrep -v "make|plugins|test_runner|tools"); do mv $d lldb/test/API; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-vscode -maxdepth 1 -mindepth 1 | grep -v ".py"); do mv $d lldb/test/API/tools/lldb-vscode; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-server -maxdepth 1 -mindepth 1 | egrep -v "gdbremote_testcase.py|lldbgdbserverutils.py|socket_packet_pump.py"); do mv $d lldb/test/API/tools/lldb-server; done
```
lldb/packages/Python/lldbsuite/__init__.py and lldb/test/API/lit.cfg.py were also updated with the new directory structure.
Reviewers: labath, JDevlieghere
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71151
When I have symlinked builddir on Fedora 31 x86_64 I get:
FAIL: test_libraries_svr4_libs_present (TestGdbRemoteLibrariesSvr4Support.TestGdbRemoteLibrariesSvr4Support)
----------------------------------------------------------------------
...
File "lldb/packages/Python/lldbsuite/test/tools/lldb-server/libraries-svr4/TestGdbRemoteLibrariesSvr4Support.py", line 106, in
libraries_svr4_libs_present
self.assertIn(self.getBuildDir() + "/" + lib, libraries_svr4_names)
AssertionError:
'/home/jkratoch/redhat/llvm-monorepo-clangassertsymlink/lldb-test-build.noindex/tools/lldb-server/libraries-svr4/TestGdbRemoteLibrariesSvr4Support.test_libraries_svr4_libs_present/libsvr4lib_a.so' not found in ['/home/jkratoch/redhat/llvm-monorepo/lldb/packages/Python/lldbsuite/test/tools/lldb-server/libraries-svr4/linux-vdso.so.1', '/quad/home/jkratoch/redhat/llvm-monorepo-clangassertsymlink/lldb-test-build.noindex/tools/lldb-server/libraries-svr4/TestGdbRemoteLibrariesSvr4Support.test_libraries_svr4_libs_present/libsvr4lib_a.so', '/quad/home/jkratoch/redhat/llvm-monorepo-clangassertsymlink/lldb-test-build.noindex/tools/lldb-server/libraries-svr4/TestGdbRemoteLibrariesSvr4Support.test_libraries_svr4_libs_present/libsvr4lib_b".so', '/usr/lib64/libdl-2.30.so', '/usr/lib64/libstdc++.so.6.0.27', '/usr/lib64/libm-2.30.so', '/usr/lib64/libgcc_s-9-20190827.so.1', '/usr/lib64/libc-2.30.so', '/usr/lib64/ld-2.30.so']
Config=x86_64-/quad/home/jkratoch/redhat/llvm-monorepo-clangassertsymlink/bin/clang-11
----------------------------------------------------------------------
Differential Revision: https://reviews.llvm.org/D74295
Summary:
There was a bug on LLDB VSCode where there was the following behavior:
//Code
```
struct foo {
int bar:
};
...
foo my_foo = {10};
```
Trying to auto-complete my_foo.b with my_foo.bar resulted instead with my_foo.my_foo.bar
This diff fixes this bug and adds some tests to check correct behavior.
It also fixes the same bug using the arrow operator (->) when user manually requests completions.
TODO: Fix bug where no recommended completions are automatically shown with arrow operator
{F11249959}
{F11249958}
Reviewers: wallace
Reviewed By: wallace
Subscribers: teemperor, labath, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73506
Summary:
A lot of tests do this trick but the vast majority of them don't even call `print()`.
Most of this patch was generated by a script that just looks at all the files and deletes the line if there is no `print (` or `print(` anywhere else in the file.
I checked the remaining tests manually and deleted the import if we never call print (but instead do stuff like `expr print(...)` and similar false-positives).
I also corrected the additional empty lines after the import in the files that I manually edited.
Reviewers: JDevlieghere, labath, jfb
Reviewed By: labath
Subscribers: dexonsmith, wuzish, nemanjai, kbarton, christof, arphaman, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71452
"The debug adapter supports the delayed loading of parts of the stack,
which requires that both the 'startFrame' and 'levels' arguments and the
'totalFrames' result of the 'StackTrace' request are supported."
Lack of this field makes VSCode incorrectly display stack traces information
D71034
Implement major improvements to multithreaded program support. Notably,
support tracking new and exited threads, associate signals and events
with correct threads and support controlling individual threads when
resuming.
Firstly, use PT_SET_EVENT_MASK to enable reporting of created and exited
threads via SIGTRAP. Handle TRAP_LWP events to keep track
of the currently running threads.
Secondly, update the signal (both generic and SIGTRAP) handling code
to account for per-thread signals correctly. Signals delivered
to the whole process are reported on all threads, while per-thread
signals and events are reported only to the specific thread.
The remaining threads are marked as 'stopped with no reason'. Note that
NetBSD always stops all threads on debugger events.
Thirdly, implement the ability to set every thread as running, stopped
or single-stepping separately while continuing the process. This also
provides the ability to send a signal to the whole process or to one
of its thread while resuming.
Differential Revision: https://reviews.llvm.org/D70022
Summary:
The test used a non-stopping "run" command to launch the process. This
is different from the regular launch with no extra launch commands,
which uses eLaunchFlagStopAtEntry to ensure that the process stops
straight away.
I'm not really sure what's supposed to happen in non-stop-at-entry mode,
or if that's even supported, but what ended up happening was the launch
packet got a reply while the process was running. Then the test case did
a continue_to_next_stop(), which queued a *second* resume request
(along with the internal "resumes" which were being issued as a part of
normal process startup). These two resumes ended up chasing each other's
tails inside lldb in a way which produced hilarious log traces.
Surprisingly, the test ended up passing most of the time, but it did
cause spurious failures when the test seemed to miss a breakpoint.
This changes the test to use stop-at-entry mode in the manual launch
sequence too, which seems to be enough to make the test pass reliably.
Reviewers: clayborg, kusmour, jankratochvil
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70127
Implement thread name getting sysctl() on NetBSD. Also fix
the incorrect type in pthread_setname_np() in the relevant test.
Differential Revision: https://reviews.llvm.org/D70363
Summary:
The DAP has a completion request that has been unimplemented. It allows showing autocompletion tokens inside the Debug Console.
I implemented it in a very simple fashion mimicking what the user would see when autocompleting an expression inside the CLI.
There are two cases: normal variables and commands. The latter occurs when a text is prepepended with ` in the Debug Console.
These two cases work well and have tests.
Reviewers: clayborg, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D69873
The VSCode tests were all disabled on macOS because the implementation
had some issues that resulted in flakiness on Darwin. It seems most of
these issues have been addressed. I've re-enabled all the tests that
consistently passed locally.
Most of the secondary Makefiles we have are just a couple variable
definitions and then an include of Makefile.rules. This patch removes
most of the secondary Makefiles and replaces them with a direct
invocation of Makefile.rules in the main Makefile. The specificities
of each sub-build are listed right there on the recursive $(MAKE)
call. All the variables that matter are being passed automagically by
make as they have been passed on the command line. The only things you
need to specify are the variables customizating the Makefile.rules
logic for each image.
This patch also removes most of the clean logic from those Makefiles
and from Makefile.rules. The clean rule is not required anymore now
that we run the testsuite in a separate build directory that is wiped
with each run. The patch leaves a very crude version of clean in
Makefile.rules which removes everything inside of $(BUILDDIR). It does
this only when the $(BUILDDIR) looks like a sub-directory of our
standard testsuite build directory to be extra safe.
Reviewers: aprantl, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68558
llvm-svn: 374076
This test streamlines our use of variables that are expected by
Makefile.rules throughout the test suite. Mostly it replaced
potentially dangerous overrides and updates of variables like CFLAGS
with safe assignments to variables reserved for this purpose like
CFLAGS_EXTRAS.
Differential Revision: https://reviews.llvm.org/D67984
llvm-svn: 372795
Summary:
In r367234 we introduced a central place to hold the set up commands for
the various ways we have of launching lldb. However, a number of
commands still remained outside of that.
This patch moves the remaining set up commands into this function, which
allows us to remove manual clang module path setting code in
TestBatchMode.
One unfortunate victim of this approach is TestSTTYBeforeAndAfter which,
due to how it launches lldb (pexpect->expect->lldb), fails get the
quoting right. It would be possible to fix the quoting there, it would be a bit
icky, and none of the commands in this list are really relevant for what this
test is doing, so I just remove the commands outright.
Reviewers: JDevlieghere, jankratochvil
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D67173
llvm-svn: 371019
plugin.
Unfortunately the test is currently XFAILed because of missing changes
to the clang driver.
Differential Revision: https://reviews.llvm.org/D67124
llvm-svn: 370931
Summary:
Instead of each test case knowing its depth relative to the test root,
we can just have dotest add the folder containing Makefile.rules to the
include path.
This was motivated by r370616, though I have been wanting to do this
ever since we moved to building tests out-of-tree.
The only manually modified files in this patch are lldbinline.py and
plugins/builder_base.py. The rest of the patch has been produced by this
shell command:
find . \( -name Makefile -o -name '*.mk' \) -exec sed --in-place -e '/LEVEL *:\?=/d' -e '1,2{/^$/d}' -e 's,\$(LEVEL)/,,' {} +
Reviewers: teemperor, aprantl, espindola, jfb
Subscribers: emaste, javed.absar, arichardson, christof, arphaman, lldb-commits
Differential Revision: https://reviews.llvm.org/D67083
llvm-svn: 370845
It looks like running without this argument was supported
for legacy reasons, but a Xcode 11 beta made the argument
mandatory for our usecase.
llvm-svn: 369709
the platform in the setUp/tearDown methods. I want to migrate the
re-instatement of the correct plaform to the setUp base method but
haven't had time to look at that yet, so I want to land this handful
of fixes until I get to it.
Differential revision: https://reviews.llvm.org/D66331
llvm-svn: 369484
Summary:
This can help `lldb-vscode` handle launch commands associate with remote platform
attach request have field `attachCommands` to handle attach specific commands
add a corresponding one for launch request
if no launch command is provided, create a new target and launch; otherwise, execute the launch command
Differential Revision: https://reviews.llvm.org/D65363
Patch by Wanyi Ye <kusmour@gmail.com>
llvm-svn: 369296
Summary: Thanks to Hui Huang and reviewers for all the help with this patch!
Reviewers: labath, jfb, clayborg
Reviewed By: labath
Subscribers: Hui, clayborg, dexonsmith, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61687
llvm-svn: 368776
Summary: Thanks to Hui Huang and the reviewers for all the help with this patch.
Reviewers: labath, Hui, jfb, clayborg, amccarth
Reviewed By: labath
Subscribers: amccarth, compnerd, dexonsmith, mgorny, jfb, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D63165
llvm-svn: 368759
Compare the directory paths returned by lldb-vscode against realpaths
rather than apparent paths. This matches lldb-vscode behavior
and therefore fixes test failures when one of the parent directories
of the source tree is a symlink.
Differential Revision: https://reviews.llvm.org/D65432
llvm-svn: 367291
rL357954 did increase `packet-timeout` 1sec -> 5secs. Which is IMO about the
maximum timeout reasonable for regular use. But for testsuite I think the
timeout should be higher as the testsuite runs in parallel and it can be run
even on slow hosts and with other load (moreover if it runs on some slow arch).
I have chosen 60 secs, that should be enough hopefully. Larger value could
make debugging with hanging `lldb-server` annoying.
This patch was based on this testsuite timeout:
http://lab.llvm.org:8014/builders/lldb-x86_64-fedora/builds/546/steps/test/logs/stdio
FAIL: test_connect (TestGDBRemoteClient.TestGDBRemoteClient)
Test connecting to a remote gdb server
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/TestGDBRemoteClient.py", line 13, in test_connect
process = self.connect(target)
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/gdbclientutils.py", line 480, in connect
self.assertTrue(error.Success(), error.description)
AssertionError: False is not True : failed to get reply to handshake packet
Differential Revision: https://reviews.llvm.org/D65271
llvm-svn: 367234
Mark the process as stopped when SIGSTOP arrives. This is necessary
for lldb-server to generate correct response to 'process interrupt',
and therefore to prevent the whole stack crashing when process
is stopped.
Thanks to Pavel Labath for the tip.
Differential Revision: https://reviews.llvm.org/D65289
llvm-svn: 367047
Walter Erquinigo