Liveness analysis abstract attribute used to indicate which BasicBlocks are dead and can therefore be ignored.
Right now we are only looking at noreturn calls.
Reviewers: jdoerfert, uenoku
Subscribers: hiraditya, llvm-commits
Differential revision: https://reviews.llvm.org/D64162
llvm-svn: 366736
While debugging code that uses SafeStack, we've noticed that LLVM
produces an invalid DWARF. Concretely, in the following example:
int main(int argc, char* argv[]) {
std::string value = "";
printf("%s\n", value.c_str());
return 0;
}
DWARF would describe the value variable as being located at:
DW_OP_breg14 R14+0, DW_OP_deref, DW_OP_constu 0x20, DW_OP_minus
The assembly to get this variable is:
leaq -32(%r14), %rbx
The order of operations in the DWARF symbols is incorrect in this case.
Specifically, the deref is incorrect; this appears to be incorrectly
re-inserted in repalceOneDbgValueForAlloca.
With this change which inserts the deref after the offset instead of
before it, LLVM produces correct DWARF:
DW_OP_breg14 R14-32
Differential Revision: https://reviews.llvm.org/D64971
llvm-svn: 366726
Current algorithm to update branch weights of latch block and its copies is
based on the assumption that number of peeling iterations is approximately equal
to trip count.
However it is not correct. According to profitability check in one case we can decide to peel
in case it helps to reduce the number of phi nodes. In this case the number of peeled iteration
can be less then estimated trip count.
This patch introduces another way to set the branch weights to peeled of branches.
Let F is a weight of the edge from latch to header.
Let E is a weight of the edge from latch to exit.
F/(F+E) is a probability to go to loop and E/(F+E) is a probability to go to exit.
Then, Estimated TripCount = F / E.
For I-th (counting from 0) peeled off iteration we set the the weights for
the peeled latch as (TC - I, 1). It gives us reasonable distribution,
The probability to go to exit 1/(TC-I) increases. At the same time
the estimated trip count of remaining loop reduces by I.
As a result after peeling off N iteration the weights will be
(F - N * E, E) and trip count of loop becomes
F / E - N or TC - N.
The idea is taken from the review of the patch D63918 proposed by Philip.
Reviewers: reames, mkuper, iajbar, fhahn
Reviewed By: reames
Subscribers: hiraditya, zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D64235
llvm-svn: 366665
If the blockaddress is not destoryed, the destination block will still
be marked as having its address taken, limiting further transformations.
I think there are other places where the dead blockaddress constants are kept
around, I'll look into that as follow up.
Reviewers: craig.topper, brzycki, davide
Reviewed By: brzycki, davide
Differential Revision: https://reviews.llvm.org/D64936
llvm-svn: 366633
Add "memtag" sanitizer that detects and mitigates stack memory issues
using armv8.5 Memory Tagging Extension.
It is similar in principle to HWASan, which is a software implementation
of the same idea, but there are enough differencies to warrant a new
sanitizer type IMHO. It is also expected to have very different
performance properties.
The new sanitizer does not have a runtime library (it may grow one
later, along with a "debugging" mode). Similar to SafeStack and
StackProtector, the instrumentation pass (in a follow up change) will be
inserted in all cases, but will only affect functions marked with the
new sanitize_memtag attribute.
Reviewers: pcc, hctim, vitalybuka, ostannard
Subscribers: srhines, mehdi_amini, javed.absar, kristof.beyls, hiraditya, cryptoad, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64169
llvm-svn: 366123
It is possible that loop exit has two predecessors in a loop body.
In this case after the peeling the iDom of the exit should be a clone of
iDom of original exit but no a clone of a block coming to this exit.
Reviewers: reames, fhahn
Reviewed By: reames
Subscribers: hiraditya, zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D64618
llvm-svn: 366050
This CL enables peeling of the loop with multiple exits where
one exit should be from latch and others are basic blocks with
call to deopt.
The peeling is enabled under the flag which is false by default.
Reviewers: reames, mkuper, iajbar, fhahn
Reviewed By: reames
Subscribers: xbolva00, hiraditya, zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D63923
llvm-svn: 366048
With this patch the getLoopEstimatedTripCount function will
accept also the loops where there are more than one exit but
all exits except latch block should ends up with a call to deopt.
This side exits should not impact the estimated trip count.
Reviewers: reames, mkuper, danielcdh
Reviewed By: reames
Subscribers: fhahn, lebedev.ri, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D64553
llvm-svn: 366042
Extract the code from LoopUnrollRuntime into utility function to
re-use it in D63923.
Reviewers: reames, mkuper
Reviewed By: reames
Subscribers: fhahn, hiraditya, zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D64548
llvm-svn: 366040
Introduce and deduce "nosync" function attribute to indicate that a function
does not synchronize with another thread in a way that other thread might free memory.
Reviewers: jdoerfert, jfb, nhaehnle, arsenm
Subscribers: wdng, hfinkel, nhaenhle, mehdi_amini, steven_wu,
dexonsmith, arsenm, uenoku, hiraditya, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D62766
llvm-svn: 365830
Summary:
The map kept in loop rotate is used for instruction remapping, in order
to simplify the clones of instructions. Thus, if an instruction can be
simplified, its simplified value is placed in the map, even when the
clone is added to the IR. MemorySSA in contrast needs to know about that
clone, so it can add an access for it.
To resolve this: keep a different map for MemorySSA.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63680
llvm-svn: 365672
An alloca which can be sunk into the extraction region may have more
than one bitcast use. Move these uses along with the alloca to prevent
use-before-def.
Testing: check-llvm, stage2 build of clang
Fixes llvm.org/PR42451.
Differential Revision: https://reviews.llvm.org/D64463
llvm-svn: 365660
Summary:
Transform
pow(C,x)
To
exp2(log2(C)*x)
if C > 0, C != inf, C != NaN (and C is not power of 2, since we have some fold for such case already).
log(C) is folded by the compiler and exp2 is much faster to compute than pow.
Reviewers: spatel, efriedma, evandro
Reviewed By: evandro
Subscribers: lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64099
llvm-svn: 365637
This patch modifies the loop peeling transformation so that
it does not expect that there is only one loop exit from latch.
It modifies only transformation. Update of branch weights remains
only for exit from latch.
The motivation is that in follow-up patch I plan to enable loop peeling for
loops with multiple exits but only if other exits then from latch one goes to
block with call to deopt.
For now this patch is NFC.
Reviewers: reames, mkuper, iajbar, fhahn
Reviewed By: reames, fhahn
Subscribers: zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D63921
llvm-svn: 365441
loop
Summary:
Do the cloning in two steps, first allocate all the new loops, then
clone the basic blocks in the same order as the original loop.
Reviewer: Meinersbur, fhahn, kbarton, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, hiraditya, llvm-commits
Tag: https://reviews.llvm.org/D64224
Differential Revision:
llvm-svn: 365366
This patch adds a function attribute, nofree, to indicate that a function does
not, directly or indirectly, call a memory-deallocation function (e.g., free,
C++'s operator delete).
Reviewers: jdoerfert
Differential Revision: https://reviews.llvm.org/D49165
llvm-svn: 365336
It's possible that some function can load and store the same
variable using the same constant expression:
store %Derived* @foo, %Derived** bitcast (%Base** @bar to %Derived**)
%42 = load %Derived*, %Derived** bitcast (%Base** @bar to %Derived**)
The bitcast expression was mistakenly cached while processing loads,
and never examined later when processing store. This caused @bar to
be mistakenly treated as read-only variable. See load-store-caching.ll.
llvm-svn: 365188
This reverts r365040 (git commit 5cacb91475)
Speculatively reverting, since this appears to have broken check-lld on
Linux. Partial analysis in https://crbug.com/981168.
llvm-svn: 365097
This transform came up in D62414, but we should deal with it first.
We have LLVM intrinsics that correspond exactly to libm calls (unlike
most libm calls, these libm calls never set errno).
This holds without any fast-math-flags, so we should always canonicalize
to those intrinsics directly for better optimization.
Currently, we convert to fcmp+select only when we have FMF (nnan) because
fcmp+select does not preserve the semantics of the call in the general case.
Differential Revision: https://reviews.llvm.org/D63214
llvm-svn: 364714
This patch introduces a new function attribute, willreturn, to indicate
that a call of this function will either exhibit undefined behavior or
comes back and continues execution at a point in the existing call stack
that includes the current invocation.
This attribute guarantees that the function does not have any endless
loops, endless recursion, or terminating functions like abort or exit.
Patch by Hideto Ueno (@uenoku)
Reviewers: jdoerfert
Subscribers: mehdi_amini, hiraditya, steven_wu, dexonsmith, lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62801
llvm-svn: 364555
FunctionComparator attempts to produce a stable comparison of two Function
instances by looking at all available properties. Since ByVal attributes now
contain a Type pointer, they are not trivially ordered and FunctionComparator
should use its own Type comparison logic to sort them.
llvm-svn: 364523
This patch generalizes the UnrollLoop utility to support loops that exit
from the header instead of the latch. Usually, LoopRotate would take care
of must of those cases, but in some cases (e.g. -Oz), LoopRotate does
not kick in.
Codesize impact looks relatively neutral on ARM64 with -Oz + LTO.
Program master patch diff
External/S.../CFP2006/447.dealII/447.dealII 629060.00 627676.00 -0.2%
External/SPEC/CINT2000/176.gcc/176.gcc 1245916.00 1244932.00 -0.1%
MultiSourc...Prolangs-C/simulator/simulator 86100.00 86156.00 0.1%
MultiSourc...arks/Rodinia/backprop/backprop 66212.00 66252.00 0.1%
MultiSourc...chmarks/Prolangs-C++/life/life 67276.00 67312.00 0.1%
MultiSourc...s/Prolangs-C/compiler/compiler 69824.00 69788.00 -0.1%
MultiSourc...Prolangs-C/assembler/assembler 86672.00 86696.00 0.0%
Reviewers: efriedma, vsk, paquette
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D61962
llvm-svn: 364398
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
I have set up a separate review D61933 for a fix which is required for this patch.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel, jmorse
Reviewed By: hfinkel, jmorse
Subscribers: jmorse, javed.absar, eraman, kcc, bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
> llvm-svn: 363046
llvm-svn: 363786
Using the new SwitchInstProfUpdateWrapper this patch
simplifies 3 places of prof branch_weights handling.
Differential Revision: https://reviews.llvm.org/D62123
llvm-svn: 363652
Summary:
There is PHINode::getBasicBlockIndex() and PHINode::setIncomingValue()
but no function to replace incoming value for a specified BasicBlock*
predecessor.
Clearly, there are a lot of places that could use that functionality.
Reviewer: craig.topper, lebedev.ri, Meinersbur, kbarton, fhahn
Reviewed By: Meinersbur, fhahn
Subscribers: fhahn, hiraditya, zzheng, jsji, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63338
llvm-svn: 363566
Third time's the charm.
This was reverted in r363220 due to being suspected of an internal benchmark
regression and a test failure, none of which turned out to be caused by this.
llvm-svn: 363529
SimplifyCFG has a bug that results in inconsistent prof branch_weights metadata
if unreachable switch cases are removed. This patch fixes this bug by making use
of the newly introduced SwitchInstProfUpdateWrapper class (see patch D62122).
A new test is created.
Differential Revision: https://reviews.llvm.org/D62186
llvm-svn: 363527
If we can detect that saturating math that depends on an IV cannot
overflow, replace it with simple math. This is similar to the CVP
optimization from D62703, just based on a different underlying
analysis (SCEV vs LVI) that catches different cases.
Differential Revision: https://reviews.llvm.org/D62792
llvm-svn: 363489
and replace with an equilivent countTrailingZeros.
GCD is much more expensive than this, with repeated division.
This depends on D60823
Differential Revision: https://reviews.llvm.org/D61151
llvm-svn: 363422
This reverts 363226 and 363227, both NFC intended
I swear I fixed the test case that is failing, and ran
the tests, but I will look into it again.
llvm-svn: 363229
and replace with an equilivent countTrailingZeros.
GCD is much more expensive than this, with repeated division.
This depends on D60823
Differential Revision: https://reviews.llvm.org/D61151
llvm-svn: 363227
We have observed some failures with internal builds with this revision.
- Performance regressions:
- llvm's SingleSource/Misc evalloop shows performance regressions (although these may be red herrings).
- Benchmarks for Abseil's SwissTable.
- Correctness:
- Failures for particular libicu tests when building the Google AppEngine SDK (for PHP).
hwennborg has already been notified, and is aware of reproducer failures.
llvm-svn: 363220
This changes the standalone pass only. Arguably the utility class
itself should assert there are no convergent calls. However, a target
pass with additional context may still be able to version a loop if
all of the dynamic conditions are sufficiently uniform.
llvm-svn: 363165
We were only matching RHS being a loop invariant value, not the inverse. Since there's nothing which appears to canonicalize loop invariant values to RHS, this means we missed cases.
Differential Revision: https://reviews.llvm.org/D63112
llvm-svn: 363108
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
I have set up a separate review D61933 for a fix which is required for this patch.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel, jmorse
Reviewed By: hfinkel, jmorse
Subscribers: jmorse, javed.absar, eraman, kcc, bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
llvm-svn: 363046
This patch changes how LLVM handles the accumulator/start value
in the reduction, by never ignoring it regardless of the presence of
fast-math flags on callsites. This change introduces the following
new intrinsics to replace the existing ones:
llvm.experimental.vector.reduce.fadd -> llvm.experimental.vector.reduce.v2.fadd
llvm.experimental.vector.reduce.fmul -> llvm.experimental.vector.reduce.v2.fmul
and adds functionality to auto-upgrade existing LLVM IR and bitcode.
Reviewers: RKSimon, greened, dmgreen, nikic, simoll, aemerson
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D60261
llvm-svn: 363035
Summary: Move some code around, in preparation for later fixes
to the non-integral addrspace handling (D59661)
Patch By Jameson Nash <jameson@juliacomputing.com>
Reviewed By: reames, loladiro
Differential Revision: https://reviews.llvm.org/D59729
llvm-svn: 362853
Summary:
The cleanup in D62751 introduced a compile-time regression due to the way DT updates are performed.
Add all insert edges then all delete edges in DTU to match the previous compile time.
Compile time on the test provided by @mstorsjo before and after this patch on my machine:
113.046s vs 35.649s
Repro: clang -target x86_64-w64-mingw32 -c -O3 glew-preproc.c; on https://martin.st/temp/glew-preproc.c.
Reviewers: kuhar, NutshellySima, mstorsjo
Subscribers: jlebar, mstorsjo, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62981
llvm-svn: 362839
Summary:
This change only unifies the API previous API pair accepting
CallInst and InvokeInst, thus making it easier to refactor
inliner pass ode to CallBase. The implementation of the unified
API still relies on the CallSite implementation.
Reviewers: eraman, chandlerc, jdoerfert
Reviewed By: jdoerfert
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62283
llvm-svn: 362656
Instead of passing around fast-math-flags as a parameter, we can set those
using an IRBuilder guard object. This is no-functional-change-intended.
The motivation is to eventually fix the vectorizers to use and set the
correct fast-math-flags for reductions. Examples of that not behaving as
expected are:
https://bugs.llvm.org/show_bug.cgi?id=23116 (should be able to reduce with less than 'fast')
https://bugs.llvm.org/show_bug.cgi?id=35538 (possible miscompile for -0.0)
D61802 (should be able to reduce with IR-level FMF)
Differential Revision: https://reviews.llvm.org/D62272
llvm-svn: 362612
Summary:
Following the cleanup in D48202, method foldBlockIntoPredecessor has the
same behavior. Replace its uses with MergeBlockIntoPredecessor.
Remove foldBlockIntoPredecessor.
Reviewers: chandlerc, dmgreen
Subscribers: jlebar, javed.absar, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62751
llvm-svn: 362538
This patch fixes a problem that occurs in LowerSwitch when a switch statement has a PHI node as its condition, and the PHI node only has two incoming blocks, and one of those incoming blocks is through an unreachable default in the switch statement. When this condition occurs, LowerSwitch holds a pointer to the condition value, but removes the switch block as a predecessor of the PHI block, causing the PHI node to be replaced. LowerSwitch then tries to use its stale pointer to the original condition value, causing a crash.
Differential Revision: https://reviews.llvm.org/D62560
llvm-svn: 362427
Extract a willNotOverflow() helper function that is shared between
eliminateOverflowIntrinsic() and strengthenOverflowingOperation().
Use WithOverflowInst for the former.
We'll be able to reuse the same code for saturating intrinsics as
well.
llvm-svn: 362305
When the object size argument is -1, no checking can be done, so calling the
_chk variant is unnecessary. We already did this for a bunch of these
functions.
rdar://50797197
Differential revision: https://reviews.llvm.org/D62358
llvm-svn: 362272
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
The original commit did not remap byval types when linking modules, which broke
LTO. This version fixes that.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362128
This was reverted in r360086 as it was supected of causing mysterious test
failures internally. However, it was never concluded that this patch was the
root cause.
> The code was previously checking that candidates for sinking had exactly
> one use or were a store instruction (which can't have uses). This meant
> we could sink call instructions only if they had a use.
>
> That limitation seemed a bit arbitrary, so this patch changes it to
> "instruction has zero or one use" which seems more natural and removes
> the need to special-case stores.
>
> Differential revision: https://reviews.llvm.org/D59936
llvm-svn: 361811
Rather than gating on "isSwitchDense" (resulting in necessesarily
sparse lookup tables even when they were generated), always run
this quite cheap transform.
This transform is useful not just for generating tables.
LowerSwitch also wants this: read LowerSwitch.cpp:257.
Be careful to not generate worse code, by introducing a
SubThreshold heuristic.
Instead of just sorting by signed, generalize the finding of the
best base.
And now that it is run unconditionally, do not replicate its
functionality in SwitchToLookupTable (which could use a Sub
when having a hole is smaller, hence the SubThreshold
heuristic located in a single place).
This simplifies SwitchToLookupTable, and fixes
some ugly corner cases due to the use of signed numbers,
such as a table containing i16 32768 and 32769, of which
32769 would be interpreted as -32768, and now the code thinks
the table is size 65536.
(We still use unconditional subtraction when building a single-register mask,
but I think this whole block should go when the more general sparse
map is added, which doesn't leave empty holes in the table.)
And the reason test4 and test5 did not trigger was documented wrong:
it was because they were not considered sufficiently "dense".
Also, fix generation of invalid LLVM-IR: shl by bit-width.
llvm-svn: 361727
and replace with an equilivent countTrailingZeros.
GCD is much more expensive than this, with repeated division.
This depends on D60823
llvm-svn: 361726
This matches countLeadingOnes() and countTrailingOnes(), and
APInt's countLeadingZeros() and countTrailingZeros().
(as well as __builtin_clzll())
llvm-svn: 361724
This reverts commit rr360902. It caused an assertion failure in
lib/IR/DebugInfoMetadata.cpp: Assertion `(OffsetInBits + SizeInBits <=
FragmentSizeInBits) && "new fragment outside of original fragment"'
failed.
PR41931.
llvm-svn: 361246
This reverts commit 95805bc425.
I've squashed the test fix into this commit.
[DebugInfo] Update loop metadata for inlined loops
Currently, when a loop is cloned while inlining function (A) into function (B)
the loop metadata is copied and then not modified at all. The loop metadata can
encode the loop's start and end DILocations. Therefore, the new inlined loop in
function (B) may have loop metadata which shows start and end locations residing
in function (A).
This patch ensures loop metadata is updated while inlining so that the start and
end DILocations are given the "inlinedAt" operand. I've also added a regression
test for this.
This fix is required for D60831 because that patch uses loop metadata to
determine the DILocation for the branches of new loop preheaders.
Reviewers: aprantl, dblaikie, anemet
Reviewed By: aprantl
Subscribers: eraman, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D61933
llvm-svn: 361149
Refactor DIExpression::With* into a flag enum in order to be less
error-prone to use (as discussed on D60866).
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D61943
llvm-svn: 361137
Summary:
Currently, when a loop is cloned while inlining function (A) into function (B) the loop metadata is copied and then not modified at all. The loop metadata can encode the loop's start and end DILocations. Therefore, the new inlined loop in function (B) may have loop metadata which shows start and end locations residing in function (A).
This patch ensures loop metadata is updated while inlining so that the start and end DILocations are given the "inlinedAt" operand. I've also added a regression test for this.
This fix is required for D60831 because that patch uses loop metadata to determine the DILocation for the branches of new loop preheaders.
Reviewers: aprantl, dblaikie, anemet
Reviewed By: aprantl
Subscribers: eraman, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D61933
llvm-svn: 361132
Fixes issue: https://bugs.llvm.org/show_bug.cgi?id=40645
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop casts
impossible. With the recent addition of DW_OP_LLVM_convert this salvaging is
now possible, and so can be used to fix the attached bug as well as any cases
where SExt instruction results are lost in the debugging metadata. This patch
introduces this fix by expanding the salvage debug info method to cover these
cases using the new operator.
Differential revision: https://reviews.llvm.org/D61184
llvm-svn: 360902
Summary: We should excluded unreachable operands from processing as their DFS visitation order is undefined. When `renameUses` function sorts `OpsToRename` (https://fburl.com/d2wubn60), the comparator assumes that the parent block of the operand has a corresponding dominator tree node. This is not the case for unreachable operands and crashes the compiler.
Reviewers: dberlin, mgrang, davide
Subscribers: efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61154
llvm-svn: 360796
Fixes issue: https://bugs.llvm.org/show_bug.cgi?id=40645
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. With the recent addition of DW_OP_LLVM_convert this
salvaging is now possible, and so can be used to fix the attached bug as
well as any cases where SExt instruction results are lost in the
debugging metadata. This patch introduces this fix by expanding the
salvage debug info method to cover these cases using the new operator.
Differential revision: https://reviews.llvm.org/D61184
llvm-svn: 360772
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
LoopSimplify can preserve MemorySSA after r360270.
But the MemorySSA analysis is retrieved and preserved only when the
EnableMSSALoopDependency is set to true. Use the same conditional to
mark the pass as preserved, otherwise subsequent passes will get an
invalid analysis.
Resolves PR41853.
llvm-svn: 360697
In certain circumstances, optimizations pick line numbers from debug
intrinsic instructions as the new location for altered instructions. This
is problematic because the line number of a debugging intrinsic is
meaningless (it doesn't produce any machine instruction), only the scope
information is valid. The result can be the line number of a variable
declaration "leaking" into real code from debugging intrinsics, making the
line table un-necessarily jumpy, and potentially different with / without
variable locations.
Fix this by using zero line numbers when promoting dbg.declare intrinsics
into dbg.values: this is safe for debug intrinsics as their line numbers
are meaningless, and reduces the scope for damage / misleading stepping
when optimizations pick locations from the wrong place.
Differential Revision: https://reviews.llvm.org/D59272
llvm-svn: 360415
Summary:
Seeing some issues for windows debug pathological cases with collectBitParts
recursion (1525 levels of recursion!)
Setting the limit to 64 as this should be sufficient - passes all lit cases
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61728
Change-Id: I7f44cdc6c1badf1c2ccbf1b0c4b6afe27ecb39a1
llvm-svn: 360347
Summary:
Preserve MemorySSA in LoopSimplify, in the old pass manager, if the analysis is available.
Do not preserve it in the new pass manager.
Update tests.
Subscribers: nemanjai, jlebar, javed.absar, Prazek, kbarton, zzheng, jsji, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60833
llvm-svn: 360270
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel
Reviewed By: hfinkel
Subscribers: bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
llvm-svn: 360162
This reverts r357452 (git commit 21eb771dcb).
This was causing strange optimization-related test failures on an internal test. Will followup with more details offline.
llvm-svn: 360086
Summary:
There is `Instruction::getNumSuccessors()`, `Instruction::getSuccessor()`
and `Instruction::setSuccessor()`, but no function to replace every
specified `BasicBlock*` successor with some other specified `BasicBlock*`.
I've found one place where it should clearly be used.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61010
llvm-svn: 359994
Summary:
If `deleteDeadLoop()` is called on such a loop, that has "bad" exit block,
one that e.g. has no terminator instruction, the `DIBuilder::insertDbgValueIntrinsic()`
will be told to insert the Dbg Value Intrinsic after `nullptr`
(since there is no first non-PHI instruction), which will cause it to not insert
those instructions into any basic block. The instructions will be parent-less,
and IR verifier will complain. It is rather obvious to track down the root cause
when that happens, so let's just assert it never happens.
Reviewers: sanjoy, davide, vsk
Reviewed By: vsk
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61008
llvm-svn: 359993
When evaluating a store through a bitcast, the evaluator tries to move the
bitcast from the pointer onto the stored value. If the cast is invalid, it
tries to "introspect" the type to get a valid cast by obtaining a pointer to
the initial element (if the type is nested, this may require walking several
initial elements).
In some situations it is possible to get a bitcast on a load (e.g. with
unions, where the bitcast may not be the same type as the store). However,
equivalent logic to the store to introspect the type is missing. This patch
add this logic.
Note, when developing the patch I was unhappy with adding similar logic
directly to the load case as it could get out of step. Instead, I have
abstracted the "introspection" into a helper function, with the specifics
being handled by a passed-in lambda function.
Differential Revision: https://reviews.llvm.org/D60793
llvm-svn: 359205
Summary:
Both the input Value pointer and the returned Value
pointers in GetUnderlyingObjects are now declared as
const.
It turned out that all current (in-tree) uses of
GetUnderlyingObjects were trivial to update, being
satisfied with have those Value pointers declared
as const. Actually, in the past several of the users
had to use const_cast, just because of ValueTracking
not providing a version of GetUnderlyingObjects with
"const" Value pointers. With this patch we get rid
of those const casts.
Reviewers: hfinkel, materi, jkorous
Reviewed By: jkorous
Subscribers: dexonsmith, jkorous, jholewinski, sdardis, eraman, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61038
llvm-svn: 359072
Summary:
Enabling MemorySSA in the old pass manager leads to MemorySSA being run
twice due to the fact that LCSSA and LoopSimplify do not preserve
MemorySSA. This is the first step to address that: target LCSSA.
LCSSA does not make any changes that invalidate MemorySSA, so it
preserves it by design. It must preserve AA as well, for this to hold.
After this patch, MemorySSA is still run twice in the old pass manager.
Step two follows: target LoopSimplify.
Subscribers: mehdi_amini, jlebar, Prazek, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60832
llvm-svn: 359032
Currently, we do not expose BPI to loop passes at all. In the old pass manager, we appear to have been ignoring the fact that LCSSA and/or LoopSimplify didn't preserve BPI, and making it available to the following loop passes anyways. In the new one, it's invalidated before running any loop pass if either LCSSA or LoopSimplify actually make changes. If they don't make changes, then BPI is valid and available. So, we go ahead and teach LCSSA and LoopSimplify how to preserve BPI for consistency between old and new pass managers.
This patch avoids an invalidation between the two requires in the following trivial pass pipeline:
opt -passes="requires<branch-prob>,loop(no-op-loop),requires<branch-prob>"
(when the input file is one which requires either LCSSA or LoopSimplify to canonicalize the loops)
Differential Revision: https://reviews.llvm.org/D60790
llvm-svn: 358901
code to `CallBase`.
This patch focuses on the legacy PM, call graph, and some of inliner and legacy
passes interacting with those APIs from `CallSite` to the new `CallBase` class.
No interesting changes.
Differential Revision: https://reviews.llvm.org/D60412
llvm-svn: 358739
The original commit caused false positives from AddressSanitizer's
use-after-scope checks, which have now been fixed in r358478.
> The code was previously checking that candidates for sinking had exactly
> one use or were a store instruction (which can't have uses). This meant
> we could sink call instructions only if they had a use.
>
> That limitation seemed a bit arbitrary, so this patch changes it to
> "instruction has zero or one use" which seems more natural and removes
> the need to special-case stores.
>
> Differential revision: https://reviews.llvm.org/D59936
llvm-svn: 358483
The CodeExtractor is not smart enough to compute which basic block is
the entry of a region. Instead it relies on the order of the list
of basic blocks that is handed to it and assumes that the entry
is the first block in the list.
Without the additional debug information, it is hard to understand
why a valid region does not get extracted, because we would miss
that the order of in the list just doesn't match what the CodeExtractor
wants.
NFC
llvm-svn: 358471
Zexts can be treated like no-op casts when it comes to assessing whether their
removal affects debug info.
Reviewer: aprantl
Differential Revision: https://reviews.llvm.org/D60641
llvm-svn: 358431
Summary:
Enable some of the existing size optimizations for cold code under PGO.
A ~5% code size saving in big internal app under PGO.
The way it gets BFI/PSI is discussed in the RFC thread
http://lists.llvm.org/pipermail/llvm-dev/2019-March/130894.html
Note it doesn't currently touch loop passes.
Reviewers: davidxl, eraman
Reviewed By: eraman
Subscribers: mgorny, javed.absar, smeenai, mehdi_amini, eraman, zzheng, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59514
llvm-svn: 358422
Summary:
Factor out findAllocaForValue() from ASan so that we can use it in
MSan to handle lifetime intrinsics.
Reviewers: eugenis, pcc
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60615
llvm-svn: 358380
* Rearrange continu/break
* BBNumbers.lookup(A) -> BBNumbers.find(A)->second
BBNumbers has been computed, thus we can assume the value exists in the predicate.
llvm-svn: 358351
Summary:
Create a method to forget everything in SCEV.
Add a cl::opt and PassManagerBuilder option to use this in LoopUnroll.
Motivation: Certain Halide applications spend a very long time compiling in forgetLoop, and prefer to forget everything and rebuild SCEV from scratch.
Sample difference in compile time reduction: 21.04 to 14.78 using current ToT release build.
Testcase showcasing this cannot be opensourced and is fairly large.
The option disabled by default, but it may be desirable to enable by
default. Evidence in favor (two difference runs on different days/ToT state):
File Before (s) After (s)
clang-9.bc 7267.91 6639.14
llvm-as.bc 194.12 194.12
llvm-dis.bc 62.50 62.50
opt.bc 1855.85 1857.53
File Before (s) After (s)
clang-9.bc 8588.70 7812.83
llvm-as.bc 196.20 194.78
llvm-dis.bc 61.55 61.97
opt.bc 1739.78 1886.26
Reviewers: sanjoy
Subscribers: mehdi_amini, jlebar, zzheng, javed.absar, dmgreen, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60144
llvm-svn: 358304
This revision causes tests to fail under ASAN. Since the cause of the failures
is not clear (could be ASAN, could be a Clang bug, could be a bug in this
revision), the safest course of action seems to be to revert while investigating.
llvm-svn: 357667
The Emscripten OS provides a definition of __EMSCRIPTEN__, and also that it
supports iprintf optimizations.
Also define small_printf optimizations, which is a printf with float support
but not long double (which in wasm can be useful since long doubles are 128
bit and force linking of float128 emulation code). This part is based on
sunfish's https://reviews.llvm.org/D57620 (which can't land yet since
the WASI integration isn't ready yet).
Differential Revision: https://reviews.llvm.org/D60167
llvm-svn: 357552
Summary:
When inserting an `unreachable` after a noreturn call, we must ensure
that it's not a musttail call to avoid breaking the IR invariants for
musttail calls.
Reviewers: fedor.sergeev, majnemer
Reviewed By: majnemer
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60080
llvm-svn: 357485
`StoreInst::getValueOperand` is identical to `getOperand(0)`, so the call to
`getOperand(0)` can be replaced. Further, `SI->getValueOperand` is redundantly
called just a few lines down, despite its return value being stored in variable
`DV`. No functional change.
llvm-svn: 357479
The code was previously checking that candidates for sinking had exactly
one use or were a store instruction (which can't have uses). This meant
we could sink call instructions only if they had a use.
That limitation seemed a bit arbitrary, so this patch changes it to
"instruction has zero or one use" which seems more natural and removes
the need to special-case stores.
Differential revision: https://reviews.llvm.org/D59936
llvm-svn: 357452
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356451
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356442
Summary: Add bindings to create a wrapped "Add Discriminators" pass. Now that we have debug info support, this is a handy transform to have.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: dblaikie, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58624
llvm-svn: 356272
This indicates an intrinsic parameter is required to be a constant,
and should not be replaced with a non-constant value.
Add the attribute to all AMDGPU and generic intrinsics that comments
indicate it should apply to. I scanned other target intrinsics, but I
don't see any obvious comments indicating which arguments are intended
to be only immediates.
This breaks one questionable testcase for the autoupgrade. I'm unclear
on whether the autoupgrade is supposed to really handle declarations
which were never valid. The verifier fails because the attributes now
refer to a parameter past the end of the argument list.
llvm-svn: 355981
This patch adds a new option to SplitAllCriticalEdges and uses it to avoid splitting critical edges when the destination basic block ends with unreachable. Otherwise if we split the critical edge, sanitizer coverage will instrument the new block that gets inserted for the split. But since this block itself shouldn't be reachable this is pointless. These basic blocks will stick around and generate assembly, but they don't end in sane control flow and might get placed at the end of the function. This makes it look like one function has code that flows into the next function.
This showed up while compiling the linux kernel with clang. The kernel has a tool called objtool that detected the code that appeared to flow from one function to the next. https://github.com/ClangBuiltLinux/linux/issues/351#issuecomment-461698884
Differential Revision: https://reviews.llvm.org/D57982
llvm-svn: 355947
The code might intend to replace puts("") with putchar('\n') even if the
return value is used. It failed because use_empty() was used to guard
the whole block. While returning '\n' (putchar('\n')) is technically
correct (puts is only required to return a nonnegative number on
success), doing this looks weird and there is really little benefit to
optimize puts whose return value is used. So don't do that.
llvm-svn: 355921
Change from original commit: move test (that uses an X86 triple) into the X86
subdirectory.
Original description:
Gating vectorizing reductions on *all* fastmath flags seems unnecessary;
`reassoc` should be sufficient.
Reviewers: tvvikram, mkuper, kristof.beyls, sdesmalen, Ayal
Reviewed By: sdesmalen
Subscribers: dcaballe, huntergr, jmolloy, mcrosier, jlebar, bixia, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57728
llvm-svn: 355889
Summary:
Extract the functionality of eliminating unreachable basic blocks
within a function, previously encapsulated within the
-unreachableblockelim pass, and make it available as a function within
BlockUtils.h. No functional change intended other than making the logic
reusable.
Exposing this logic makes it easier to implement
https://reviews.llvm.org/D59068, which fixes coroutines bug
https://bugs.llvm.org/show_bug.cgi?id=40979.
Reviewers: mkazantsev, wmi, davidxl, silvas, davide
Reviewed By: davide
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59069
llvm-svn: 355846
Fixes bug 38023: https://bugs.llvm.org/show_bug.cgi?id=38023
The SimplifyCFG pass will perform jump threading in some cases where
doing so is trivial and would simplify the CFG. When folding a series
of blocks with redundant conditional branches into an unconditional "critical
edge" block, it does not keep the debug location associated with the previous
conditional branch.
This patch fixes the bug described by copying the debug info from the
old conditional branch to the new unconditional branch instruction, and
adds a regression test for the SimplifyCFG pass that covers this case.
Patch by Stephen Tozer!
Differential Revision: https://reviews.llvm.org/D59206
llvm-svn: 355833
Summary:
Right now, when we encounter a string equality check,
e.g. `if (memcmp(a, b, s) == 0)`, we try to expand to a comparison if `s` is a
small compile-time constant, and fall back on calling `memcmp()` else.
This is sub-optimal because memcmp has to compute much more than
equality.
This patch replaces `memcmp(a, b, s) == 0` by `bcmp(a, b, s) == 0` on platforms
that support `bcmp`.
`bcmp` can be made much more efficient than `memcmp` because equality
compare is trivially parallel while lexicographic ordering has a chain
dependency.
Subscribers: fedor.sergeev, jyknight, ckennelly, gchatelet, llvm-commits
Differential Revision: https://reviews.llvm.org/D56593
llvm-svn: 355672
Summary:
While implementing inlining support for callbr
(https://bugs.llvm.org/show_bug.cgi?id=40722), I hit a crash in Loop
Rotation when trying to build the entire x86 Linux kernel
(drivers/char/random.c). This is a small fix up to r353563.
Test case is drivers/char/random.c (with callbr's inlined), then ran
through creduce, then `opt -opt-bisect-limit=<limit>`, then bugpoint.
Thanks to Craig Topper for immediately spotting the fix, and teaching me
how to fish.
Reviewers: craig.topper, jyknight
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58929
llvm-svn: 355564
Summary:
It is mentioned in the document of DTU that "It is illegal to submit any update that has already been submitted, i.e., you are supposed not to insert an existent edge or delete a nonexistent edge." It is dangerous to violet this rule because DomTree and PostDomTree occasionally crash on this scenario.
This patch fixes `MergeBlockIntoPredecessor`, making it conformant to this precondition.
Reviewers: kuhar, brzycki, chandlerc
Reviewed By: brzycki
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58444
llvm-svn: 355105
This patch adds LazyValueInfo to LowerSwitch to compute the range of the
value being switched over and reduce the size of the tree LowerSwitch
builds to lower a switch.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D58096
llvm-svn: 354670
Summary:
This patch separates two semantics of `applyUpdates`:
1. User provides an accurate CFG diff and the dominator tree is updated according to the difference of `the number of edge insertions` and `the number of edge deletions` to infer the status of an edge before and after the update.
2. User provides a sequence of hints. Updates mentioned in this sequence might never happened and even duplicated.
Logic changes:
Previously, removing invalid updates is considered a side-effect of deduplication and is not guaranteed to be reliable. To handle the second semantic, `applyUpdates` does validity checking before deduplication, which can cause updates that have already been applied to be submitted again. Then, different calls to `applyUpdates` might cause unintended consequences, for example,
```
DTU(Lazy) and Edge A->B exists.
1. DTU.applyUpdates({{Delete, A, B}, {Insert, A, B}}) // User expects these 2 updates result in a no-op, but {Insert, A, B} is queued
2. Remove A->B
3. DTU.applyUpdates({{Delete, A, B}}) // DTU cancels this update with {Insert, A, B} mentioned above together (Unintended)
```
But by restricting the precondition that updates of an edge need to be strictly ordered as how CFG changes were made, we can infer the initial status of this edge to resolve this issue.
Interface changes:
The second semantic of `applyUpdates` is separated to `applyUpdatesPermissive`.
These changes enable DTU(Lazy) to use the first semantic if needed, which is quite useful in `transforms/utils`.
Reviewers: kuhar, brzycki, dmgreen, grosser
Reviewed By: brzycki
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58170
llvm-svn: 354669
Noticed these while doing a final sweep of the code to make sure I hadn't missed anything in my last couple of patches. The (minor) missed optimization was noticed because of the stylistic fix to avoid an overly specific cast.
llvm-svn: 354412
Same case as for memset and memcpy, but this time for clobbering stores and loads. We still can't allow coercion to or from non-integrals, regardless of the transform.
Now that I'm done the whole little sequence, it seems apparent that we'd entirely missed reasoning about clobbers in the original GVN support for non-integral pointers.
My appologies, I thought we'd upstreamed all of this, but it turns out we were still carrying a downstream hack which hid all of these issues. My chanks to Cherry Zhang for helping debug.
llvm-svn: 354407
Problem is very similiar to the one fixed for memsets in r354399, we try to coerce a value to non-integral type, and then crash while try to do so. Since we shouldn't be doing such coercions to start with, easy fix. From inspection, I see two other cases which look to be similiar and will follow up with most test cases and fixes if confirmed.
llvm-svn: 354403
GVN generally doesn't forward structs or array types, but it *will* forward vector types to non-vectors and vice versa. As demonstrated in tests, we need to inhibit the same set of transforms for vector of non-integral pointers as for non-integral pointers themselves.
llvm-svn: 354401
If we encountered a location where we tried to forward the value of a memset to a load of a non-integral pointer, we crashed. Such a forward is not legal in general, but we can forward null pointers. Test for both cases are included.
llvm-svn: 354399
If a lifetime.end marker occurs along one path through the extraction
region, but not another, then it's still incorrect to lift the marker,
because there is some path through the extracted function which would
ordinarily not reach the marker. If the call to the extracted function
is in a loop, unrolling can cause inputs to the function to become
optimized out as undef after the first iteration.
To prevent incorrect stack slot merging in the calling function, it
should be sufficient to lift lifetime.start markers for region inputs.
I've tested this theory out by doing a stage2 check-all with randomized
splitting enabled.
This is a follow-up to r353973, and there's additional context for this
change in https://reviews.llvm.org/D57834.
rdar://47896986
Differential Revision: https://reviews.llvm.org/D58253
llvm-svn: 354159
The test case requires the peeled loop to be forgotten after peeling,
even though it does not have a parent. When called via the unroller,
SE->forgetTopmostLoop is also called, so the test case would also pass
without any SCEV invalidation, but peelLoop is exposed as utility
function. Also, in the test case, simplifyLoop will make changes,
removing the loop from SCEV, but it is better to not rely on this
behavior.
Reviewers: sanjoy, mkazantsev
Reviewed By: mkazantsev
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58192
llvm-svn: 354031
When CodeExtractor finds liftime markers referencing inputs to the
extraction region, it lifts these markers out of the region and inserts
them around the call to the extracted function (see r350420, PR39671).
However, it should *only* lift lifetime markers that are actually
present in the extraction region. I.e., if a start marker is present in
the extraction region but a corresponding end marker isn't (or vice
versa), only the start marker (or end marker, resp.) should be lifted.
Differential Revision: https://reviews.llvm.org/D57834
llvm-svn: 353973
Salvaging a redundant load instruction into a debug expression hides a
memory read from optimisation passes. Passes that alter memory behaviour
(such as LICM promoting memory to a register) aren't aware of these debug
memory reads and leave them unaltered, making the debug variable location
point somewhere unsafe.
Teaching passes to know about these debug memory reads would be challenging
and probably incomplete. Finding dbg.value instructions that need to be fixed
would likely be computationally expensive too, as more analysis would be
required. It's better to not generate debug-memory-reads instead, alas.
Changed tests:
* DeadStoreElim: test for salvaging of intermediate operations contributing
to the dead store, instead of salvaging of the redundant load,
* GVN: remove debuginfo behaviour checks completely, this behaviour is still
covered by other tests,
* InstCombine: don't test for salvaged loads, we're removing that behaviour.
Differential Revision: https://reviews.llvm.org/D57962
llvm-svn: 353824
`CallBase` class rather than `CallSite` wrappers.
I pushed this change down through most of the statepoint infrastructure,
completely removing the use of CallSite where I could reasonably do so.
I ended up making a couple of cut-points: generic call handling
(instcombine, TLI, SDAG). As soon as it hit truly generic handling with
users outside the immediate code, I simply transitioned into or out of
a `CallSite` to make this a reasonable sized chunk.
Differential Revision: https://reviews.llvm.org/D56122
llvm-svn: 353660
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
When CodeExtractor saves the result of InvokeInst at the first insertion
point of the 'normal destination' basic block, this block can be omitted
in the outlined region, so store is placed outside of the function. The
suggested solution is to process saving outputs after creating exit
stubs for new function, and stores will be placed in that blocks before
return in this case.
Patch by Sergei Kachkov!
Fixes llvm.org/PR40455.
Differential Revision: https://reviews.llvm.org/D57919
llvm-svn: 353562
Check that when SimplifyCFG is flattening a 'br', all their debug intrinsic instructions are removed, including any dbg.label referencing a label associated with the basic blocks being removed.
Differential Revision: https://reviews.llvm.org/D57444
llvm-svn: 353511
Summary: Assumption cache's self-updating mechanism does not correctly handle the case when blocks are extracted from the function by the CodeExtractor. As a result function's assumption cache may have stale references to the llvm.assume calls that were moved to the outlined function. This patch fixes this problem by removing extracted llvm.assume calls from the function’s assumption cache.
Reviewers: hfinkel, vsk, fhahn, davidxl, sanjoy
Reviewed By: hfinkel, vsk
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57215
llvm-svn: 353500
Summary:
Experimentally we found that promotion to scalars carries less benefits
than sinking and hoisting in LICM. When using MemorySSA, we build an
AliasSetTracker on demand in order to reuse the current infrastructure.
We only build it if less than AccessCapForMSSAPromotion exist in the
loop, a cap that is by default set to 250. This value ensures there are
no runtime regressions, and there are small compile time gains for
pathological cases. A much lower value (20) was found to yield a single
regression in the llvm-test-suite and much higher benefits for compile
times. Conservatively we set the current cap to a high value, but we will
explore lowering it when MemorySSA is enabled by default.
Reviewers: sanjoy, chandlerc
Subscribers: nemanjai, jlebar, Prazek, george.burgess.iv, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D56625
llvm-svn: 353339
DomTreeUpdater depends on headers from Analysis, but is in IR. This is a
layering violation since Analysis depends on IR. Relocate this code from IR
to Analysis to fix the layering violation.
llvm-svn: 353265
Some use cases are appearing where salvaging is needed that does not
correspond to an instruction being deleted -- for example an instruction
being sunk, or a Value not being available in a block being isel'd.
Enable more fine grained control over how salavging occurs by splitting
the logic into helper functions, separating things that are specific to
working on DbgVariableIntrinsics from those specific to interpreting IR
and building DIExpressions.
Differential Revision: https://reviews.llvm.org/D57696
llvm-svn: 353156
LoopVectorize adds llvm.loop.isvectorized, but leaves
llvm.loop.vectorize.enable. Do not consider such a loop for user-forced
vectorization since vectorization already happened -- by prioritizing
llvm.loop.isvectorized except for TM_SuppressedByUser.
Fixes http://llvm.org/PR40546
Differential Revision: https://reviews.llvm.org/D57542
llvm-svn: 353082
This assertion makes sure all sub-loops are in LCSSA form before
bringing their parent in LCSSA form. This precondition was added to
formLCSSA in D56848.
Reviewers: davide, efriedma, mzolotukhin
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D56921
llvm-svn: 352958
This cleans up all GetElementPtr creation in LLVM to explicitly pass a
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57173
llvm-svn: 352913
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all InvokeInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57171
llvm-svn: 352910
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
This reverts commit f47d6b38c7 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
llvm-svn: 352800
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352791
Summary:
COFF requires that COMDAT name match that of the leader. When we promote
and rename an internal leader in ThinLTO due to an import, ensure we
subsequently rename the associated COMDAT. Similar to D31963 which did
this during ThinLTO module splitting.
Fixes PR40414.
Reviewers: pcc, inglorion
Subscribers: mehdi_amini, dexonsmith, dmajor, llvm-commits
Differential Revision: https://reviews.llvm.org/D57395
llvm-svn: 352763
Summary:
Check the bool value of the attribute in getOptionalBoolLoopAttribute
not just its existance.
Eliminates the warning noise generated when vectorization is explicitly disabled.
Reviewers: Meinersbur, hfinkel, dmgreen
Subscribers: jlebar, sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D57260
llvm-svn: 352555
Summary:
UBSan wants to detect when unreachable code is actually reached, so it
adds instrumentation before every `unreachable` instruction. However,
the optimizer will remove code after calls to functions marked with
`noreturn`. To avoid this UBSan removes `noreturn` from both the call
instruction as well as from the function itself. Unfortunately, ASan
relies on this annotation to unpoison the stack by inserting calls to
`_asan_handle_no_return` before `noreturn` functions. This is important
for functions that do not return but access the the stack memory, e.g.,
unwinder functions *like* `longjmp` (`longjmp` itself is actually
"double-proofed" via its interceptor). The result is that when ASan and
UBSan are combined, the `noreturn` attributes are missing and ASan
cannot unpoison the stack, so it has false positives when stack
unwinding is used.
Changes:
# UBSan now adds the `expect_noreturn` attribute whenever it removes
the `noreturn` attribute from a function
# ASan additionally checks for the presence of this attribute
Generated code:
```
call void @__asan_handle_no_return // Additionally inserted to avoid false positives
call void @longjmp
call void @__asan_handle_no_return
call void @__ubsan_handle_builtin_unreachable
unreachable
```
The second call to `__asan_handle_no_return` is redundant. This will be
cleaned up in a follow-up patch.
rdar://problem/40723397
Reviewers: delcypher, eugenis
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D56624
llvm-svn: 352003
Summary:
Profile sample files include the number of times each entry or inlined
call site is sampled. This is translated into the entry count metadta
on functions.
When sample data is being read, if a call site that was inlined
in the sample program is considered cold and not inlined, then
the entry count of the out-of-line functions does not reflect
the current compilation.
In this patch, we note call sites where the function was not inlined
and as a last action of the sample profile loading, we update the
called function's entry count to reflect the calls from these
call sites which are not included in the profile file.
Reviewers: danielcdh, wmi, Kader, modocache
Reviewed By: wmi
Subscribers: davidxl, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D52845
llvm-svn: 352001
Summary:
Renamed setBaseDiscriminator to cloneWithBaseDiscriminator, to match
similar APIs. Also changed its behavior to copy over the other
discriminator components, instead of eliding them.
Renamed cloneWithDuplicationFactor to
cloneByMultiplyingDuplicationFactor, which more closely matches what
this API does.
Reviewers: dblaikie, wmi
Reviewed By: dblaikie
Subscribers: zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D56220
llvm-svn: 351996
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
CodeExtractor permits extracting a region of blocks from a function even
when values defined within the region are used outside of it.
This is typically done by creating an alloca in the original function
and reloading the alloca after a call to the extracted function.
Wrap the reload in lifetime start/end markers to promote stack coloring.
Suggested by Sergei Kachkov!
Differential Revision: https://reviews.llvm.org/D56045
llvm-svn: 351621
Essentially, do not treat `call` and `musttail call` as the same thing.
As a drive-by, fold CallInst and InvokeInst handling together using the
CallSite helper.
Differential Revision: https://reviews.llvm.org/D56815
llvm-svn: 351405
Summary:
Second iteration of D56433 which got reverted in rL350719. The problem
in the previous version was that we dropped the thunk calling the tsan init
function. The new version keeps the thunk which should appease dyld, but is not
actually OK wrt. the current semantics of function passes. Hence, add a
helper to insert the functions only on the first time. The helper
allows hooking into the insertion to be able to append them to the
global ctors list.
Reviewers: chandlerc, vitalybuka, fedor.sergeev, leonardchan
Subscribers: hiraditya, bollu, llvm-commits
Differential Revision: https://reviews.llvm.org/D56538
llvm-svn: 351314
Summary:
InvokeInst should be treated like CallInst and
assigned a separate discriminator. This is particularly
import when an Invoke is converted to a Call
during compilation and so can invalidate sample profile
data collected wtih different link time optimizations
Reviewers: twoh, Kader, danielcdh, wmi
Reviewed By: wmi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56491
llvm-svn: 351251
Following PR39807, the way in which SimplifyCFG hoists common code on
branch paths was fixed in r347782. However this left extra code hanging
around HoistThenElseCodeToIf that wasn't necessary and needlessly
complicated matters -- we no longer need to look up through the 'if'
basic block to find a location for hoisted 'select' insts, we can instead
use the location chosen by applyMergedLocation.
This patch deletes that extra logic, and updates a regression test to
reflect the new logic (selects get the merged location, not a previous
insts location).
Differential Revision: https://reviews.llvm.org/D55272
llvm-svn: 351058
Utility function `DeleteDeadBlock` expects that all predecessors of a block being
deleted are already deleted, with the exception of single-block loop. It makes it
hard to use for deletion of a set of blocks that may contain cyclic dependencies.
The is no correct order of invocations of this function that does not produce
dangling pointers on already deleted blocks.
This patch introduces a generalized version of this function `DeleteDeadBlocks`
that allows us to remove multiple blocks at once, even if there are cycles among
them. The only requirement is that no block being deleted should have a predecessor
that is not being deleted.
The logic of `DeleteDeadBlocks` is following:
for each block
create relevant DT updates;
remove all instructions (replace with undef if needed);
replace terminator with unreacheable;
apply DT updates;
for each block
delete block;
Therefore, `DeleteDeadBlock` becomes a particular case of
the general algorithm called for a single block.
Differential Revision: https://reviews.llvm.org/D56120
Reviewed By: skatkov
llvm-svn: 351045
The C standard says "The memchr function locates the first
occurrence of c (converted to an unsigned char)[...]". The expansion
was missing the conversion to unsigned char.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39041 .
Differential Revision: https://reviews.llvm.org/D55947
llvm-svn: 350775
Summary:
This fixes the IDom for exit blocks and all blocks reachable from the exit blocks, when runtime unrolling under multiexit/exiting case.
We initially had a restrictive check that the IDom is only updated when
it is the header of the loop.
However, we also need to update the IDom to the correct one when the
IDom is any block within the original loop. See added test cases (which
fail dom tree verification without the patch).
Reviewers: reames, mzolotukhin, mkazantsev, hfinkel
Reviewed by: brzycki, kuhar
Subscribers: zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D56284
llvm-svn: 350640
minted `CallBase` class instead of the `CallSite` wrapper.
This moves the largest interwoven collection of APIs that traffic in
`CallSite`s. While a handful of these could have been migrated with
a minorly more shallow migration by converting from a `CallSite` to
a `CallBase`, it hardly seemed worth it. Most of the APIs needed to
migrate together because of the complex interplay of AA APIs and the
fact that converting from a `CallBase` to a `CallSite` isn't free in its
current implementation.
Out of tree users of these APIs can fairly reliably migrate with some
combination of `.getInstruction()` on the `CallSite` instance and
casting the resulting pointer. The most generic form will look like `CS`
-> `cast_or_null<CallBase>(CS.getInstruction())` but in most cases there
is a more elegant migration. Hopefully, this migrates enough APIs for
users to fully move from `CallSite` to the base class. All of the
in-tree users were easily migrated in that fashion.
Thanks for the review from Saleem!
Differential Revision: https://reviews.llvm.org/D55641
llvm-svn: 350503
At -O0, globalopt is not run during the compile step, and we can have a
chain of an alias having an immediate aliasee of another alias. The
summaries are constructed assuming aliases in a canonical form
(flattened chains), and as a result only the base object but no
intermediate aliases were preserved.
Fix by adding a pass that canonicalize aliases, which ensures each
alias is a direct alias of the base object.
Reviewers: pcc, davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54507
llvm-svn: 350423
Lifetime markers which reference inputs to the extraction region are not
safe to extract. Example ('rhs' will be extracted):
```
entry:
+------------+
| x = alloca |
| y = alloca |
+------------+
/ \
lhs: rhs:
+-------------------+ +-------------------+
| lifetime_start(x) | | lifetime_start(x) |
| use(x) | | lifetime_start(y) |
| lifetime_end(x) | | use(x, y) |
| lifetime_start(y) | | lifetime_end(y) |
| use(y) | | lifetime_end(x) |
| lifetime_end(y) | +-------------------+
+-------------------+
```
Prior to extraction, the stack coloring pass sees that the slots for 'x'
and 'y' are in-use at the same time. After extraction, the coloring pass
infers that 'x' and 'y' are *not* in-use concurrently, because markers
from 'rhs' are no longer available to help decide otherwise.
This leads to a miscompile, because the stack slots actually are in-use
concurrently in the extracted function.
Fix this by moving lifetime start/end markers for memory regions defined
in the calling function around the call to the extracted function.
Fixes llvm.org/PR39671 (rdar://45939472).
Differential Revision: https://reviews.llvm.org/D55967
llvm-svn: 350420
NFC: This adds the dom tree verification under debug mode at a point
just before we start unrolling the loop. This allows us to verify dom
tree at a state where it is much smaller and before the unrolling
actually happens.
This also implies we do not need to run -verify-dom-info everytime to
see if the DT is in a valid state when we transform the loop for runtime
unrolling.
llvm-svn: 350334
Summary:
Keeping msan a function pass requires replacing the module level initialization:
That means, don't define a ctor function which calls __msan_init, instead just
declare the init function at the first access, and add that to the global ctors
list.
Changes:
- Pull the actual sanitizer and the wrapper pass apart.
- Add a newpm msan pass. The function pass inserts calls to runtime
library functions, for which it inserts declarations as necessary.
- Update tests.
Caveats:
- There is one test that I dropped, because it specifically tested the
definition of the ctor.
Reviewers: chandlerc, fedor.sergeev, leonardchan, vitalybuka
Subscribers: sdardis, nemanjai, javed.absar, hiraditya, kbarton, bollu, atanasyan, jsji
Differential Revision: https://reviews.llvm.org/D55647
llvm-svn: 350305
Summary:
Added a pair of APIs for encoding/decoding the 3 components of a DWARF discriminator described in http://lists.llvm.org/pipermail/llvm-dev/2016-October/106532.html: the base discriminator, the duplication factor (useful in profile-guided optimization) and the copy index (used to identify copies of code in cases like loop unrolling)
The encoding packs 3 unsigned values in 32 bits. This CL addresses 2 issues:
- communicates overflow back to the user
- supports encoding all 3 components together. Current APIs assume a sequencing of events. For example, creating a new discriminator based on an existing one by changing the base discriminator was not supported.
Reviewers: davidxl, danielcdh, wmi, dblaikie
Reviewed By: dblaikie
Subscribers: zzheng, dmgreen, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D55681
llvm-svn: 349973
Instruction::isLifetimeStartOrEnd() checks whether an Instruction is an
llvm.lifetime.start or an llvm.lifetime.end intrinsic.
This was suggested as a cleanup in D55967.
Differential Revision: https://reviews.llvm.org/D56019
llvm-svn: 349964
Currently, runtime unrolling does not support loops where multiple
exiting blocks exit to the latchExit. Added TODO and other code
clarifications for ConnectProlog code.
llvm-svn: 349944
This verification is linear in the size of the function, so it can cause
a quadratic compile-time explosion in a function with many loops to
unroll.
Differential Revision: https://reviews.llvm.org/D54732
llvm-svn: 349871
The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.
This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).
This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.
The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.
Differential Revision: https://reviews.llvm.org/D52116
llvm-svn: 349725
When converting dbg.declares, if the described value is a [s|z]ext,
refer to the ext directly instead of referring to its operand.
This fixes a narrowing bug (the debugger got the sign of a variable
wrong, see llvm.org/PR35400).
The main reason to refer to the ext's operand was that an optimization
may remove the ext itself, leading to a dropped variable. Now that
InstCombine has been taught to use replaceAllDbgUsesWith (r336451), this
is less of a concern. Other passes can/should adopt this API as needed
to fix dropped variable bugs.
Differential Revision: https://reviews.llvm.org/D51813
llvm-svn: 349214
The `changeToCall` function did not preserve the invoke's metadata.
Currently, there is probably no metadata that depends on being applied
on a CallInst or InvokeInst. Therefore we can replace the instruction's
metadata.
This fixes http://llvm.org/PR39994
Suggested-by: Moritz Kreutzer <moritz.kreutzer@siemens.com>
Differential Revision: https://reviews.llvm.org/D55666
llvm-svn: 349170
Summary:
This patch computes the synthetic function entry count on the whole
program callgraph (based on module summary) and writes the entry counts
to the summary. After function importing, this count gets attached to
the IR as metadata. Since it adds a new field to the summary, this bumps
up the version.
Reviewers: tejohnson
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D43521
llvm-svn: 349076
The actual type of the first argument of the @dbg intrinsic
doesn't really matter as we're setting it to `undef`, but the
bitcode reader is picky about `void` types.
llvm-svn: 349069
When loops are deleted, we don't keep track of variables modified inside
the loops, so the DI will contain the wrong value for these.
e.g.
int b() {
int i;
for (i = 0; i < 2; i++)
;
patatino();
return a;
-> 6 patatino();
7 return a;
8 }
9 int main() { b(); }
(lldb) frame var i
(int) i = 0
We mark instead these values as unavailable inserting a
@llvm.dbg.value(undef to make sure we don't end up printing an incorrect
value in the debugger. We could consider doing something fancier,
for, e.g. constants, in the future.
PR39868.
rdar://problem/46418795)
Differential Revision: https://reviews.llvm.org/D55299
llvm-svn: 348988
When multiple loop transformation are defined in a loop's metadata, their order of execution is defined by the order of their respective passes in the pass pipeline. For instance, e.g.
#pragma clang loop unroll_and_jam(enable)
#pragma clang loop distribute(enable)
is the same as
#pragma clang loop distribute(enable)
#pragma clang loop unroll_and_jam(enable)
and will try to loop-distribute before Unroll-And-Jam because the LoopDistribute pass is scheduled after UnrollAndJam pass. UnrollAndJamPass only supports one inner loop, i.e. it will necessarily fail after loop distribution. It is not possible to specify another execution order. Also,t the order of passes in the pipeline is subject to change between versions of LLVM, optimization options and which pass manager is used.
This patch adds 'followup' attributes to various loop transformation passes. These attributes define which attributes the resulting loop of a transformation should have. For instance,
!0 = !{!0, !1, !2}
!1 = !{!"llvm.loop.unroll_and_jam.enable"}
!2 = !{!"llvm.loop.unroll_and_jam.followup_inner", !3}
!3 = !{!"llvm.loop.distribute.enable"}
defines a loop ID (!0) to be unrolled-and-jammed (!1) and then the attribute !3 to be added to the jammed inner loop, which contains the instruction to distribute the inner loop.
Currently, in both pass managers, pass execution is in a fixed order and UnrollAndJamPass will not execute again after LoopDistribute. We hope to fix this in the future by allowing pass managers to run passes until a fixpoint is reached, use Polly to perform these transformations, or add a loop transformation pass which takes the order issue into account.
For mandatory/forced transformations (e.g. by having been declared by #pragma omp simd), the user must be notified when a transformation could not be performed. It is not possible that the responsible pass emits such a warning because the transformation might be 'hidden' in a followup attribute when it is executed, or it is not present in the pipeline at all. For this reason, this patche introduces a WarnMissedTransformations pass, to warn about orphaned transformations.
Since this changes the user-visible diagnostic message when a transformation is applied, two test cases in the clang repository need to be updated.
To ensure that no other transformation is executed before the intended one, the attribute `llvm.loop.disable_nonforced` can be added which should disable transformation heuristics before the intended transformation is applied. E.g. it would be surprising if a loop is distributed before a #pragma unroll_and_jam is applied.
With more supported code transformations (loop fusion, interchange, stripmining, offloading, etc.), transformations can be used as building blocks for more complex transformations (e.g. stripmining+stripmining+interchange -> tiling).
Reviewed By: hfinkel, dmgreen
Differential Revision: https://reviews.llvm.org/D49281
Differential Revision: https://reviews.llvm.org/D55288
llvm-svn: 348944
When CodeExtractor outlines values which are used by the original
function, it must store those values in some in-out parameter. This
store instruction must not be inserted in between a PHI and an EH pad
instruction, as that results in invalid IR.
This fixes the following verifier failure seen while outlining within
ObjC methods with live exit values:
The unwind destination does not have an exception handling instruction!
%call35 = invoke i8* bitcast (i8* (i8*, i8*, ...)* @objc_msgSend to i8* (i8*, i8*)*)(i8* %exn.adjusted, i8* %1)
to label %invoke.cont34 unwind label %lpad33, !dbg !4183
The unwind destination does not have an exception handling instruction!
invoke void @objc_exception_throw(i8* %call35) #12
to label %invoke.cont36 unwind label %lpad33, !dbg !4184
LandingPadInst not the first non-PHI instruction in the block.
%3 = landingpad { i8*, i32 }
catch i8* null, !dbg !1411
rdar://46540815
llvm-svn: 348562
Treat terminators which resume exception propagation as returning instructions
(at least, for the purposes of marking outlined functions `noreturn`). This is
to avoid inserting traps after calls to outlined functions which unwind.
rdar://46129950
llvm-svn: 348404
If a PHI node out of extracted region has multiple incoming values from it,
split this PHI on two parts. First PHI has incomings only from region and
extracts with it (they are placed to the separate basic block that added to the
list of outlined), and incoming values in original PHI are replaced by first
PHI. Similar solution is already used in CodeExtractor for PHIs in entry block
(severSplitPHINodes method). It covers PR39433 bug.
Patch by Sergei Kachkov!
Differential Revision: https://reviews.llvm.org/D55018
llvm-svn: 348205
We were duplicating code around the existing isImpliedCondition() that
checks for a predecessor block/dominating condition, so make that a
wrapper call.
llvm-svn: 348088
Summary:
When mem2reg inserts phi nodes in blocks with unreachable predecessors,
it adds undef operands for those incoming edges. When there are
multiple such predecessors, the order is currently based on the address
of the BasicBlocks. This change fixes that by using the BBNumbers in
the sort/search predicates, as is done elsewhere in mem2reg to ensure
determinism.
Also adds a testcase with a bunch of unreachable preds, which
(nodeterministically) fails without the fix.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D55077
llvm-svn: 348024
In PR39807 we incorrectly handle circumstances where calls are common'd
from conditional blocks into the parent BB. Calls that can be inlined
must always have DebugLocs, however we strip them during commoning, which
the IR verifier asserts on.
Fix this by using applyMergedLocation: it will perform the same DebugLoc
stripping of conditional Locs, but will also generate an unknown location
DebugLoc that satisfies the requirement for inlinable calls to always have
locations.
Some of the prior logic for selecting a DebugLoc is now likely redundant;
I'll generate a follow-up to remove it (involves editing more regression
tests).
Differential Revision: https://reviews.llvm.org/D54997
llvm-svn: 347782
Summary:
This is a NFC as we do not import non-odr vague linkage when computing
for import list for a module.
Reviewers: tejohnson, pcc
Subscribers: inglorion, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D54928
llvm-svn: 347763
Summary:
Removing ncompatible attributes at indirect-call promoted callsites, not removing it results in
at least a IR verification error.
Reviewers: davidxl, xur, mssimpso
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54913
llvm-svn: 347605
Put 'static' on three functions in an anonymous namespace as per our
coding style.
Remove the 'namespace llvm {}' around the .cpp file and explicitly
declare the free function 'llvm::optimizeGlobalCtorsList' in 'llvm::'.
I prefer this style for free functions because the compiler will error
out if the .h and .cpp files don't agree on the function name or
prototype.
llvm-svn: 347269
Add methods to BasicBlock which make it easier to efficiently check
whether a block has N (or more) predecessors.
This can be more efficient than using pred_size(), which is a linear
time operation.
We might consider adding similar methods for successors. I haven't done
so in this patch because succ_size() is already O(1).
With this patch applied, I measured a 0.065% compile-time reduction in
user time for running `opt -O3` on the sqlite3 amalgamation (30 trials).
The change in mergeStoreIntoSuccessor alone saves 45 million linked list
iterations in a stage2 Release build of llc.
See llvm.org/PR39702 for a harder but more general way of achieving
similar results.
Differential Revision: https://reviews.llvm.org/D54686
llvm-svn: 347256
An attempt to recommit r346584 after failure on OSX build bot.
Fixed cache key computation in ThinLTOCodeGenerator and added
test case
llvm-svn: 347033
LoopUtils.cpp contains a utility that splits an loop exit block, so that the new block contains only edges coming from the loop. In the case of nested loops, the exit path for the inner loop might also be the back-edge of the outer loop. The new block which is inserted on this path, is now a latch for the outer loop, and it needs to hold the loop metadata for the outer loop. (The test case gives a more concrete view of the situation.)
Patch by Chang Lin (clin1)
Differential Revision: https://reviews.llvm.org/D53876
llvm-svn: 346810
This patch updates DuplicateInstructionsInSplitBetween to update a DTU
instead of applying updates to the DT directly.
Given that there only are 2 users, also updated them in this patch to
avoid churn.
I slightly moved the code in CallSiteSplitting around to reduce the
places where we have to pass in DTU. If necessary, I could split those
changes in a separate patch.
This fixes missing DT updates when dealing with musttail calls in
CallSiteSplitting, by using DTU->deleteBB.
Reviewers: junbuml, kuhar, NutshellySima, indutny, brzycki
Reviewed By: NutshellySima
llvm-svn: 346769
This patch allows internalising globals if all accesses to them
(from live functions) are from non-volatile load instructions
Differential revision: https://reviews.llvm.org/D49362
llvm-svn: 346584
In SimplifyCFG when given a conditional branch that goes to BB1 and BB2, the hoisted common terminator instruction in the two blocks, caused debug line records associated with subsequent select instructions to become ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D53390
llvm-svn: 346481
This eliminates the outlining penalty for llvm.trap/unreachable, because
callers no longer have to emit cleanup/ret instructions after calling an
outlined `noreturn` function.
rdar://45523626
llvm-svn: 346421
The lowering for a call to eh_typeid_for changes when it's moved from
one function to another.
There are several proposals for fixing this issue in llvm.org/PR39545.
Until some solution is in place, do not allow CodeExtractor to extract
calls to eh_typeid_for, as that results in serious miscompilations.
llvm-svn: 346256
When CodeExtractor moves instructions to a new function, debug
intrinsics referring to those instructions within the parent function
become invalid.
This results in the same verifier failure which motivated r344545, about
function-local metadata being used in the wrong function.
llvm-svn: 346255
Clang's -Wimplicit-fallthrough implementation warns on this. I built
clang with GCC 7.3 in +asserts and -asserts mode, and GCC doesn't warn
on this in either configuration. I think it is unnecessary. I separated
it from the large mechanical patch (https://reviews.llvm.org/D53950) in
case I am wrong and it has to be reverted.
llvm-svn: 345876
As K has to dominate I, IIUC I's range metadata must be a subset of
K's. After Eli's recent clarification to the LangRef, loading a value
outside of the range is undefined behavior.
Therefore if I's range contains elements outside of K's range and we would load
one such value, K would cause undefined behavior.
In cases like hoisting/sinking, we still want the most generic range
over all code paths to/from the hoist/sink point. As suggested in the
patches related to D47339, I will refactor the handling of those
scenarios and try to decouple it from this function as follow up, once
we switched to a similar handling of metadata in most of
combineMetadata.
I updated some tests checking mostly the merging of metadata to keep the
metadata of to dominating load. The most interesting one is probably test8 in
test/Transforms/JumpThreading/thread-loads.ll. It contained a comment
about the alias metadata preventing us to eliminate the branch, but it
seem like the actual problem currently is that we merge the ranges of
both loads and cannot eliminate the icmp afterwards. With this patch, we
manage to eliminate the icmp, as the range of the first load excludes 8.
Reviewers: efriedma, nlopes, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51629
llvm-svn: 345456
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D53287
llvm-svn: 345250
The current splitting algorithm works in three stages:
1) Identify cold blocks, then
2) Use forward/backward propagation to mark hot blocks, then
3) Grow a SESE region of blocks *outside* of the set of hot blocks and
start outlining.
While testing this pass on Apple internal frameworks I noticed that some
kinds of control flow (e.g. loops) are never outlined, even though they
unconditionally lead to / follow cold blocks. I noticed two other issues
related to how cold regions are identified:
- An inconsistency can arise in the internal state of the hotness
propagation stage, as a block may end up in both the ColdBlocks set
and the HotBlocks set. Further inconsistencies can arise as these sets
do not match what's in ProfileSummaryInfo.
- It isn't necessary to limit outlining to single-exit regions.
This patch teaches the splitting algorithm to identify maximal cold
regions and outline them. A maximal cold region is defined as the set of
blocks post-dominated by a cold sink block, or dominated by that sink
block. This approach can successfully outline loops in the cold path. As
a side benefit, it maintains less internal state than the current
approach.
Due to a limitation in CodeExtractor, blocks within the maximal cold
region which aren't dominated by a single entry point (a so-called "max
ancestor") are filtered out.
Results:
- X86 (LNT + -Os + externals): 134KB of TEXT were outlined compared to
47KB pre-patch, or a ~3x improvement. Did not see a performance impact
across two runs.
- AArch64 (LNT + -Os + externals + Apple-internal benchmarks): 149KB
of TEXT were outlined. Ditto re: performance impact.
- Outlining results improve marginally in the internal frameworks I
tested.
Follow-ups:
- Outline more than once per function, outline large single basic
blocks, & try to remove unconditional branches in outlined functions.
Differential Revision: https://reviews.llvm.org/D53627
llvm-svn: 345209
Summary:
The current default of appending "_"+entry block label to the new
extracted cold function breaks demangling. Change the deliminator from
"_" to "." to enable demangling. Because the header block label will
be empty for release compile code, use "extracted" after the "." when
the label is empty.
Additionally, add a mechanism for the client to pass in an alternate
suffix applied after the ".", and have the hot cold split pass use
"cold."+Count, where the Count is currently 1 but can be used to
uniquely number multiple cold functions split out from the same function
with D53588.
Reviewers: sebpop, hiraditya
Subscribers: llvm-commits, erik.pilkington
Differential Revision: https://reviews.llvm.org/D53534
llvm-svn: 345178
Summary:
In several places in the code we use the following pattern:
if (hasUnaryFloatFn(&TLI, Ty, LibFunc_tan, LibFunc_tanf, LibFunc_tanl)) {
[...]
Value *Res = emitUnaryFloatFnCall(X, TLI.getName(LibFunc_tan), B, Attrs);
[...]
}
In short, we check if there is a lib-function for a certain type, and then
we _always_ fetch the name of the "double" version of the lib function and
construct a call to the appropriate function, that we just checked exists,
using that "double" name as a basis.
This is of course a problem in cases where the target doesn't support the
"double" version, but e.g. only the "float" version.
In that case TLI.getName(LibFunc_tan) returns "", and
emitUnaryFloatFnCall happily appends an "f" to "", and we erroneously end
up with a call to a function called "f".
To solve this, the above pattern is changed to
if (hasUnaryFloatFn(&TLI, Ty, LibFunc_tan, LibFunc_tanf, LibFunc_tanl)) {
[...]
Value *Res = emitUnaryFloatFnCall(X, &TLI, LibFunc_tan, LibFunc_tanf,
LibFunc_tanl, B, Attrs);
[...]
}
I.e instead of first fetching the name of the "double" version and then
letting emitUnaryFloatFnCall() add the final "f" or "l", we let
emitUnaryFloatFnCall() fetch the right name from TLI.
Reviewers: eli.friedman, efriedma
Reviewed By: efriedma
Subscribers: efriedma, bjope, llvm-commits
Differential Revision: https://reviews.llvm.org/D53370
llvm-svn: 344725
Summary:
Extend LCSSA so that debug values outside loops are rewritten to
use the PHI nodes that the pass creates.
This fixes PR39019. In that case, we ran LCSSA on a loop that
was later on vectorized, which left us with something like this:
for.cond.cleanup:
%add.lcssa = phi i32 [ %add, %for.body ], [ %34, %middle.block ]
call void @llvm.dbg.value(metadata i32 %add,
ret i32 %add.lcssa
for.body:
%add =
[...]
br i1 %exitcond, label %for.cond.cleanup, label %for.body
which later resulted in the debug.value becoming undef when
removing the scalar loop (and the location would have probably
been wrong for the vectorized case otherwise).
As we now may need to query the AvailableVals cache more than
once for a basic block, FindAvailableVals() in SSAUpdaterImpl is
changed so that it updates the cache for blocks that we do not
create a PHI node for, regardless of the block's number of
predecessors. The debug value in the attached IR reproducer
would not be properly rewritten without this.
Debug values residing in blocks where we have not inserted any
PHI nodes are currently left as-is by this patch. I'm not sure
what should be done with those uses.
Reviewers: mattd, aprantl, vsk, probinson
Reviewed By: mattd, aprantl
Subscribers: jmorse, gbedwell, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D53130
llvm-svn: 344589
Variable updates within the outlined function are invisible to
debuggers. This could be improved by defining a DISubprogram for the
new function. For the moment, simply erase the debug intrinsics instead.
This fixes verifier failures about function-local metadata being used in
the wrong function, seen while testing the hot/cold splitting pass.
rdar://45142482
Differential Revision: https://reviews.llvm.org/D53267
llvm-svn: 344545
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
This requires updating a number of .cpp files to adapt to the new API.
I've just systematically updated all uses of `TerminatorInst` within
these files te `Instruction` so thta I won't have to touch them again in
the future.
llvm-svn: 344498
LLVM APIs. There weren't very many.
We still have the instruction visitor, and APIs with TerminatorInst as
a return type or an output parameter.
llvm-svn: 344494
InstCombine keeps a worklist and assumes that optimizations don't
eraseFromParent() the instruction, which SimplifyLibCalls violates. This change
adds a new callback to SimplifyLibCalls to let clients specify their own hander
for erasing actions.
Differential Revision: https://reviews.llvm.org/D52729
llvm-svn: 344251
There is a transform that may replace `lshr (x+1), 1` with `lshr x, 1` in case
if it can prove that the result will be the same. However the initial instruction
might have an `exact` flag set, and it now should be dropped unless we prove
that it may hold. Incorrectly set `exact` attribute may then produce poison.
Differential Revision: https://reviews.llvm.org/D53061
Reviewed By: sanjoy
llvm-svn: 344223
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D52887
llvm-svn: 344120
Summary:
At some point in the past the recursion in DominatesMergePoint used to pass null for AggressiveInsts as part of the recursion. It no longer does this. So there is no way for AggressiveInsts to be null.
This passes it by reference and removes the null check to make this explicit.
Reviewers: efriedma, reames
Reviewed By: efriedma
Subscribers: xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D52575
llvm-svn: 343828
Summary:
The llvm::SimplifyCFG function creates a SimplifyCFGOpt object and calls run on it. There were numerous places reached from this run function that called back out llvm::SimplifyCFG which would create another SimplifyCFGOpt object. This is an inefficient use of stack space at minimum. We are also not passing along the LoopHeaders pointer passed into the outer llvm::SimplifyCFG call. So if its not null we lose it on the first recursion and get nullptr from there on.
This patch adds an outer loop around the main BasicBlock simplifying code and adds a flag to the SimplifyCFGOpt class that can be set by to request another iteration. I don't think we can iterate based just on the change flag alone since some of the simplifications delete a basic block entirely leaving nothing to iterate on.
Reviewers: bogner, eli.friedman, reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52760
llvm-svn: 343816
getNumUses is linear in the number of uses. Since we're looking for a specific use count, we can use hasNUses which will stop as soon as it determines there are more than N uses instead of walking all of them.
llvm-svn: 343550
There are a few leftovers in rL343163 which span two lines. This commit
changes these llvm::sort(C.begin(), C.end, ...) to llvm::sort(C, ...)
llvm-svn: 343426
In this patch, I'm adding an extra check to the Latch's terminator in llvm::UnrollRuntimeLoopRemainder,
similar to how it is already done in the llvm::UnrollLoop.
The compiler would crash if this function is called with a malformed loop.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D51486
llvm-svn: 342958
This is still unsafe for long double, we will transform things into tanl
even if tanl is for another type. But that's for someone else to fix.
llvm-svn: 342542
When SimplifyCFG changes the PHI node into a select instruction, the debug information becomes ambiguous. It causes the debugger to display wrong variable value.
Differential Revision: https://reviews.llvm.org/D51976
llvm-svn: 342527
Previously the alignment on the newly created switch table data was not set,
meaning that DataLayout::getPreferredAlignment was free to overalign it to 16
bytes. This causes unnecessary code bloat.
Differential Revision: https://reviews.llvm.org/D51800
llvm-svn: 342039
Summary:
The InductionDescriptor and RecurrenceDescriptor classes basically analyze the IR to identify the respective IVs. So, it is better to have them in the "Analysis" directory instead of the "Transforms" directory.
The rationale for this is to make the Induction and Recurrence descriptor classes available for analysis passes. Currently including them in an analysis pass produces link error (http://lists.llvm.org/pipermail/llvm-dev/2018-July/124456.html).
Induction and Recurrence descriptors are moved from Transforms/Utils/LoopUtils.h|cpp to Analysis/IVDescriptors.h|cpp.
Reviewers: dmgreen, llvm-commits, hfinkel
Reviewed By: dmgreen
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D51153
llvm-svn: 342016
Summary:
Move InductionDescriptor::transform() routine from LoopUtils to its only uses in LoopVectorize.cpp.
Specifically, the function is renamed as InnerLoopVectorizer::emitTransformedIndex().
This is a child to D51153.
Reviewers: dmgreen, llvm-commits
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D51837
llvm-svn: 341776
Summary:
Block splitting is done with either identical edges being merged, or not.
Only critical edges can be split without merging identical edges based on an option.
Teach the memoryssa updater to take this into account: for the same edge between two blocks only move one entry from the Phi in Old to the new Phi in New.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D51563
llvm-svn: 341709
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
Generalize the simplification of `pow(2.0, y)` to `pow(2.0 ** n, y)` for all
scalar and vector types.
This improvement helps some benchmarks in SPEC CPU2000 and CPU2006, such as
252.eon, 447.dealII, 453.povray. Otherwise, no significant regressions on
x86-64 or A64.
Differential revision: https://reviews.llvm.org/D49273
llvm-svn: 341095
This reverts commit r340997.
This change turned out not to be NFC after all, but e.g. causes
clang to crash when building the linux kernel for aarch64.
llvm-svn: 341031
These classes don't make any changes to IR and have no reason to be in
Transform/Utils. This patch moves them to Analysis folder. This will allow
us reusing these classes in some analyzes, like MustExecute.
llvm-svn: 341015
The cost modeling was not accounting for the fact we were duplicating the instruction once per predecessor. With a default threshold of 1, this meant we were actually creating #pred copies.
Adding to the fun, there is *absolutely no* test coverage for this. Simply bailing for more than one predecessor passes all checked in tests.
llvm-svn: 341001
Expand the simplification of `pow(exp{,2}(x), y)` to all FP types.
This improvement helps some benchmarks in SPEC CPU2000 and CPU2006, such as
252.eon, 447.dealII, 453.povray. Otherwise, no significant regressions on
x86-64 or A64.
Differential revision: https://reviews.llvm.org/D51195
llvm-svn: 340948
Generalize the simplification of `pow(2.0, y)` to `pow(2.0 ** n, y)` for all
scalar and vector types.
This improvement helps some benchmarks in SPEC CPU2000 and CPU2006, such as
252.eon, 447.dealII, 453.povray. Otherwise, no significant regressions on
x86-64 or A64.
Differential revision: https://reviews.llvm.org/D49273
llvm-svn: 340947
We have multiple places in code where we try to identify whether or not
some instruction is a guard. This patch factors out this logic into a separate
utility function which works uniformly in all places.
Differential Revision: https://reviews.llvm.org/D51152
Reviewed By: fedor.sergeev
llvm-svn: 340921
This patch creates file GuardUtils which will contain logic for work with guards
that can be shared across different passes.
Differential Revision: https://reviews.llvm.org/D51151
Reviewed By: fedor.sergeev
llvm-svn: 340914
Summary:
This fixes PR31105.
There is code trying to delete dead code that does so by e.g. checking if
the single predecessor of a block is the block itself.
That check fails on a block like this
bb:
br i1 undef, label %bb, label %bb
since that has two (identical) predecessors.
However, after the check for dead blocks there is a call to
ConstantFoldTerminator on the basic block, and that call simplifies the
block to
bb:
br label %bb
Therefore we now do the call to ConstantFoldTerminator before the check if
the block is dead, so it can realize that it really is.
The original behavior lead to the block not being removed, but it was
simplified as above, and then we did a call to
Dest->replaceAllUsesWith(&*I);
with old and new being equal, and an assertion triggered.
Reviewers: chandlerc, fhahn
Reviewed By: fhahn
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D51280
llvm-svn: 340820
Fix the issue of duplicating the call to `exp{,2}()` when it's nested in
`pow()`, as exposed by rL340462.
Differential revision: https://reviews.llvm.org/D51194
llvm-svn: 340784
We have a class `ImplicitControlFlowTracking` which allows us to keep track of
instructions that can abnormally exit and answer queries like "whether or not
there is side-exiting instruction above this instruction in its block".
We may want to have the similar tracking for other types of "special" instructions,
for example instructions that write memory.
This patch separates ImplicitControlFlowTracking into two classes, isolating all
general logic not related to implicit control flow into its parent class. We can
later make another child of this class to keep track of instructions that write
memory.
The motivation for that is that we want to make these checks efficiently in the
patch https://reviews.llvm.org/D50891.
NOTE: The naming of the parent class is not super cool, but the other options we
have are hardly better. Please feel free to rename it as NFC if you think you've
found a more informative name for it.
Differential Revision: https://reviews.llvm.org/D50954
Reviewed By: fedor.sergeev
llvm-svn: 340728
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
`isExceptionalTermiantor` and implement it for opcodes as well following
the common pattern in `Instruction`.
Part of removing `TerminatorInst` from the `Instruction` type hierarchy
to make it easier to share logic and interfaces between instructions
that are both terminators and not terminators.
llvm-svn: 340699
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
llvm-svn: 340606
Most users won't have to worry about this as all of the
'getOrInsertFunction' functions on Module will default to the program
address space.
An overload has been added to Function::Create to abstract away the
details for most callers.
This is based on https://reviews.llvm.org/D37054 but without the changes to
make passing a Module to Function::Create() mandatory. I have also added
some more tests and fixed the LLParser to accept call instructions for
types in the program address space.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D47541
llvm-svn: 340519
Currently CodeExtractor tries to use the next node after an invoke to
place the store for the result of the invoke, if it is an out parameter
of the region. This fails, as the invoke terminates the current BB.
In that case, we can place the store in the 'normal destination' BB, as
the result will only be available in that case.
Reviewers: davidxl, davide, efriedma
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D51037
llvm-svn: 340331
DAGCombiner doesn't pay attention to whether constants are opaque before doing the div by constant optimization. So BypassSlowDivision shouldn't introduce control flow that would make DAGCombiner unable to see an opaque constant. This can occur when a div and rem of the same constant are used in the same basic block. it will be hoisted, but not leave the block.
Longer term we probably need to look into the X86 immediate cost model used by constant hoisting and maybe not mark div/rem immediates for hoisting at all.
This fixes the case from PR38649.
Differential Revision: https://reviews.llvm.org/D51000
llvm-svn: 340303
This is a follow-up suggested with rL339604.
For tan(), we don't have a corresponding LLVM
intrinsic -- unlike sin/cos -- so this is the
only way/place that we can do this fold currently.
llvm-svn: 339958
Expand the number of cases when `pow(x, 0.5)` is simplified into `sqrt(x)`
by considering the math semantics with more granularity.
Differential revision: https://reviews.llvm.org/D50036
llvm-svn: 339887
Summary:
Previously, `eraseFromParent()` calls `delete` which invalidates the value of the pointer. Copying the value of the pointer later is undefined behavior in C++11 and implementation-defined (which may cause a segfault on implementations having strict pointer safety) in C++14.
This patch removes the BasicBlock pointer from related SmallPtrSet before `delete` invalidates it in the SimplifyCFG pass.
Reviewers: kuhar, dmgreen, davide, trentxintong
Reviewed By: kuhar, dmgreen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50717
llvm-svn: 339773
Even though this code is below a function called optimizeFloatingPointLibCall(),
we apparently can't guarantee that we're dealing with FPMathOperators, so bail
out immediately if that's not true.
llvm-svn: 339618
This is a very partial fix for the reported problem. I suspect
we do not get this fold in most motivating cases because most of
the time, the libcall would have been replaced by an intrinsic,
and that optimization is handled elsewhere...but maybe it should
be handled here?
llvm-svn: 339604
Pulled out a separate function for some code that calculates
if an inner loop iteration count is invariant to it's outer
loop.
Differential Revision: https://reviews.llvm.org/D50063
llvm-svn: 339500
In combineMetadata, we should be able to preserve K's nonnull metadata,
if K does not move. This condition should hold for all replacements by
NewGVN/GVN, but I added a bunch of assertions to verify that.
Fixes PR35038.
There probably are additional kinds of metadata that could be preserved
using similar reasoning. This is follow-up work.
Reviewers: dberlin, davide, efriedma, nlopes
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47339
llvm-svn: 339149
This function is shared between both implementations. I am not sure if
Utils/Local.h is the best place though.
Reviewers: davide, dberlin, efriedma, xbolva00
Reviewed By: efriedma, xbolva00
Differential Revision: https://reviews.llvm.org/D47337
llvm-svn: 339138
Logic for tracking implicit control flow instructions was added to GVN to
perform PRE optimizations correctly. It appears that GVN is not the only
optimization that sometimes does PRE, so this logic is required in other
places (such as Jump Threading).
This is an NFC patch that encapsulates all ICF-related logic in a dedicated
utility class separated from GVN.
Differential Revision: https://reviews.llvm.org/D40293
llvm-svn: 339086
Properly shrink `pow()` to `powf()` as a binary function and, when no other
simplification applies, do not discard it.
Differential revision: https://reviews.llvm.org/D50113
llvm-svn: 339046
In the past, DbgInfoIntrinsic has a strong assumption that these
intrinsics all have variables and expressions attached to them.
However, it is too strong to derive the class for other debug entities.
Now, it has problems for debug labels.
In order to make DbgInfoIntrinsic as a base class for 'debug info', I
create a class for 'variable debug info', DbgVariableIntrinsic.
DbgDeclareInst, DbgAddrIntrinsic, and DbgValueInst will be derived from it.
Differential Revision: https://reviews.llvm.org/D50220
llvm-svn: 338984
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338969
Summary:
Previously, in the NewPM pipeline, TailCallElim recalculates the DomTree when it modifies any instruction in the Function.
For example,
```
CallInst *CI = dyn_cast<CallInst>(&I);
...
CI->setTailCall();
Modified = true;
...
if (!Modified || ...)
return PreservedAnalyses::all();
```
After applying this patch, the DomTree only recalculates if needed (plus an extra insertEdge() + an extra deleteEdge() call).
When optimizing SQLite with `-passes="default<O3>"` pipeline of the newPM, the number of DomTree recalculation decreases by 6.2%, the number of nodes visited by DFS decreases by 2.9%. The time used by DomTree will decrease approximately 1%~2.5% after applying the patch.
Statistics:
```
Before the patch:
23010 dom-tree-stats - Number of DomTree recalculations
489264 dom-tree-stats - Number of nodes visited by DFS -- DomTree
After the patch:
21581 dom-tree-stats - Number of DomTree recalculations
475088 dom-tree-stats - Number of nodes visited by DFS -- DomTree
```
Reviewers: kuhar, dmgreen, brzycki, grosser, davide
Reviewed By: kuhar, brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49982
llvm-svn: 338954
Merge the helper functions for shrinking unary and binary functions into a
single one, while keeping all their functionality. Otherwise, NFC.
llvm-svn: 338905
Summary:
Previously, `removeUnreachableBlocks` still returns true (which indicates the CFG is changed) even when all the unreachable blocks found is awaiting deletion in the DDT class.
This makes code pattern like
```
// Code modified from lib/Transforms/Scalar/SimplifyCFGPass.cpp
bool EverChanged = removeUnreachableBlocks(F, nullptr, DDT);
...
do {
EverChanged = someMightHappenModifications();
EverChanged |= removeUnreachableBlocks(F, nullptr, DDT);
} while (EverChanged);
```
become a dead loop.
Fix this by detecting whether a BasicBlock is already awaiting deletion.
Reviewers: kuhar, brzycki, dmgreen, grosser, davide
Reviewed By: kuhar, brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49738
llvm-svn: 338882
Summary:
This patch is the second in a series of patches related to the [[ http://lists.llvm.org/pipermail/llvm-dev/2018-June/123883.html | RFC - A new dominator tree updater for LLVM ]].
It converts passes (e.g. adce/jump-threading) and various functions which currently accept DDT in local.cpp and BasicBlockUtils.cpp to use the new DomTreeUpdater class.
These converted functions in utils can accept DomTreeUpdater with either UpdateStrategy and can deal with both DT and PDT held by the DomTreeUpdater.
Reviewers: brzycki, kuhar, dmgreen, grosser, davide
Reviewed By: brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48967
llvm-svn: 338814
Adds some cleaned up debug messages from back when I was writing this.
Hopefully useful to others (and myself) as to why unroll and jam is not
transforming as expected.
Differential Revision: https://reviews.llvm.org/D50062
llvm-svn: 338676
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338494
Summary:
When inserting lcssa Phi Nodes in the exit block
mak sure to preserve the original instructions DL.
Reviewers: vsk
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D50009
llvm-svn: 338391
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338387
This is a follow-up for the patch rL335020. When we replace compares against
trunc with compares against wide IV, we can also replace signed predicates with
unsigned where it is legal.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D48763
llvm-svn: 338115
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
llvm-svn: 338069
Create a processHeaderPhiOperands for analysing the instructions
in the aft blocks that must be moved before the loop.
Differential Revision: https://reviews.llvm.org/D49061
llvm-svn: 338033
This is a workaround and it would be better to fix this generally, but
doing it generally is quite tricky. See D48541 and PR38117.
Doing it in PredicateInfo directly allows us to use the type address to
differentiate different unnamed types, because neither the created
declarations nor the ssa_copy calls should be visible after
PredicateInfo got destroyed.
Reviewers: efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D49126
llvm-svn: 337828
Summary:
The optimizer is 10%+ slower with vs without debuginfo. I started checking where
the difference is coming from.
I compiled sqlite3.c with and without debug info from CTMark and compare the time difference.
I use Xcode Instrument to find where time is spent. This brings about 20ms, out of ~20s.
Reviewers: davide, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D49337
llvm-svn: 337416
We no longer care about the order of blocks in these collections,
so can change to SmallPtrSets, making contains checks quicker.
Differential revision: https://reviews.llvm.org/D49060
llvm-svn: 336897
Summary:
Fixed two cases of where PHI nodes need to be updated by lowerswitch.
When lowerswitch find out that the switch default branch is not
reachable it remove the old default and replace it with the most
popular block from the cases, but it forget to update the PHI
nodes in the default block.
The PHI nodes also need to be updated when the switch is replaced
with a single branch.
Reviewers: hans, reames, arsenm
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D47203
llvm-svn: 336659
Summary:
Support for this option is needed for building Linux kernel.
This is a very frequently requested feature by kernel developers.
More details : https://lkml.org/lkml/2018/4/4/601
GCC option description for -fdelete-null-pointer-checks:
This Assume that programs cannot safely dereference null pointers,
and that no code or data element resides at address zero.
-fno-delete-null-pointer-checks is the inverse of this implying that
null pointer dereferencing is not undefined.
This feature is implemented in LLVM IR in this CL as the function attribute
"null-pointer-is-valid"="true" in IR (Under review at D47894).
The CL updates several passes that assumed null pointer dereferencing is
undefined to not optimize when the "null-pointer-is-valid"="true"
attribute is present.
Reviewers: t.p.northover, efriedma, jyknight, chandlerc, rnk, srhines, void, george.burgess.iv
Reviewed By: efriedma, george.burgess.iv
Subscribers: eraman, haicheng, george.burgess.iv, drinkcat, theraven, reames, sanjoy, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47895
llvm-svn: 336613
The replaceAllDbgUsesWith utility helps passes preserve debug info when
replacing one value with another.
This improves upon the existing insertReplacementDbgValues API by:
- Updating debug intrinsics in-place, while preventing use-before-def of
the replacement value.
- Falling back to salvageDebugInfo when a replacement can't be made.
- Moving the responsibiliy for rewriting llvm.dbg.* DIExpressions into
common utility code.
Along with the API change, this teaches replaceAllDbgUsesWith how to
create DIExpressions for three basic integer and pointer conversions:
- The no-op conversion. Applies when the values have the same width, or
have bit-for-bit compatible pointer representations.
- Truncation. Applies when the new value is wider than the old one.
- Zero/sign extension. Applies when the new value is narrower than the
old one.
Testing:
- check-llvm, check-clang, a stage2 `-g -O3` build of clang,
regression/unit testing.
- This resolves a number of mis-sized dbg.value diagnostics from
Debugify.
Differential Revision: https://reviews.llvm.org/D48676
llvm-svn: 336451
Summary:
When salvaging a dbg.declare/dbg.addr we should not add
DW_OP_stack_value to the DIExpression
(see test/Transforms/InstCombine/salvage-dbg-declare.ll).
Consider this example
%vla = alloca i32, i64 2
call void @llvm.dbg.declare(metadata i32* %vla, metadata !1, metadata !DIExpression())
Instcombine will turn it into
%vla1 = alloca [2 x i32]
%vla1.sub = getelementptr inbounds [2 x i32], [2 x i32]* %vla, i64 0, i64 0
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1.sub, metadata !19, metadata !DIExpression())
If the GEP can be eliminated, then the dbg.declare will be salvaged
and we should get
%vla1 = alloca [2 x i32]
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression())
The problem was that salvageDebugInfo did not recognize dbg.declare
as being indirect (%vla1 points to the value, it does not hold the
value), so we incorrectly got
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression(DW_OP_stack_value))
I also made sure that llvm::salvageDebugInfo and
DIExpression::prependOpcodes do not add DW_OP_stack_value to
the DIExpression in case no new operands are added to the
DIExpression. That way we avoid to, unneccessarily, turn a
register location expression into an implicit location expression
in some situations (see test11 in test/Transforms/LICM/sinking.ll).
Reviewers: aprantl, vsk
Reviewed By: aprantl, vsk
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48837
llvm-svn: 336191
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder Loop
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
llvm-svn: 336062
and diretory.
Also cleans up all the associated naming to be consistent and removes
the public access to the pass ID which was unused in LLVM.
Also runs clang-format over parts that changed, which generally cleans
up a bunch of formatting.
This is in preparation for doing some internal cleanups to the pass.
Differential Revision: https://reviews.llvm.org/D47352
llvm-svn: 336028
If a trunc has a user in a block which is not reachable from entry,
we can safely perform trunc elimination as if this user didn't exist.
llvm-svn: 335816
salvageDebugInfo() performs a check that allows it to exit early without
doing a DenseMap lookup. It's a bit neater and marginally more useful to
sink this early exit into the findDbg{Addr,Users,Values} helpers.
llvm-svn: 335642
Summary:
This is a follow-up to r334830 and r335031.
In the valueCoversEntireFragment check we now also handle
the situation when there is a variable length array (VLA)
involved, and the length of the array has been reduced to
a constant.
The ConvertDebugDeclareToDebugValue functions that are related
to PHI nodes and load instructions now avoid inserting dbg.value
intrinsics when the value does not, for certain, cover the
variable/fragment that should be described.
In r334830 we assumed that the value always covered the entire
var/fragment and we had assertions in the code to show that
assumption. However, those asserts failed when compiling code
with VLAs, so we removed the asserts in r335031. Now when we
know that the valueCoversEntireFragment check can fail also for
PHI/Load instructions we avoid to insert the faulty dbg.value
intrinsic in such situations. Compared to the Store instruction
scenario we simply drop the dbg.value here (as the variable does
not change its value due to PHI/Load, so an earlier dbg.value
describing the variable should still be valid).
Reviewers: aprantl, vsk, efriedma
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48547
llvm-svn: 335580
Summary:
A reprise of D25849.
This crash was found through fuzzing some time ago and was documented in PR28879.
No check for load size has been added due to the following tests:
- Transforms/GVN/invariant.group.ll
- Transforms/GVN/pr10820.ll
These tests expect load sizes that are not a multiple of eight.
Thanks to @davide for the original patch.
Reviewers: nlopes, davide, RKSimon, reames, efriedma
Reviewed By: efriedma
Subscribers: davide, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D48330
llvm-svn: 335294
Summary:
Two utils methods have essentially the same functionality. This is an attempt to merge them into one.
1. lib/Transforms/Utils/Local.cpp : MergeBasicBlockIntoOnlyPred
2. lib/Transforms/Utils/BasicBlockUtils.cpp : MergeBlockIntoPredecessor
Prior to the patch:
1. MergeBasicBlockIntoOnlyPred
Updates either DomTree or DeferredDominance
Moves all instructions from Pred to BB, deletes Pred
Asserts BB has single predecessor
If address was taken, replace the block address with constant 1 (?)
2. MergeBlockIntoPredecessor
Updates DomTree, LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
After the patch:
Method 2. MergeBlockIntoPredecessor is attempting to become the new default:
Updates DomTree or DeferredDominance, and LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
Uses of MergeBasicBlockIntoOnlyPred that need to be replaced:
1. lib/Transforms/Scalar/LoopSimplifyCFG.cpp
Updated in this patch. No challenges.
2. lib/CodeGen/CodeGenPrepare.cpp
Updated in this patch.
i. eliminateFallThrough is straightforward, but I added using a temporary array to avoid the iterator invalidation.
ii. eliminateMostlyEmptyBlock(s) methods also now use a temporary array for blocks
Some interesting aspects:
- Since Pred is not deleted (BB is), the entry block does not need updating.
- The entry block was being updated with the deleted block in eliminateMostlyEmptyBlock. Added assert to make obvious that BB=SinglePred.
- isMergingEmptyBlockProfitable assumes BB is the one to be deleted.
- eliminateMostlyEmptyBlock(BB) does not delete BB on one path, it deletes its unique predecessor instead.
- adding some test owner as subscribers for the interesting tests modified:
test/CodeGen/X86/avx-cmp.ll
test/CodeGen/AMDGPU/nested-loop-conditions.ll
test/CodeGen/AMDGPU/si-annotate-cf.ll
test/CodeGen/X86/hoist-spill.ll
test/CodeGen/X86/2006-11-17-IllegalMove.ll
3. lib/Transforms/Scalar/JumpThreading.cpp
Not covered in this patch. It is the only use case using the DeferredDominance.
I would defer to Brian Rzycki to make this replacement.
Reviewers: chandlerc, spatel, davide, brzycki, bkramer, javed.absar
Subscribers: qcolombet, sanjoy, nemanjai, nhaehnle, jlebar, tpr, kbarton, RKSimon, wmi, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D48202
llvm-svn: 335183
This utility should operate on Values, not Instructions. While I'm here,
I've also made it possible to skip emitting replacement dbg.values for
certain debug users (by having RewriteExpr return nullptr).
llvm-svn: 335152
Using OrderedInstructions::dominates as comparator for instructions in
BBs without dominance relation can cause a non-deterministic order
between such instructions. That in turn can cause us to materialize
copies in a non-deterministic order. While this does not effect
correctness, it causes some minor non-determinism in the final generated
code, because values have slightly different labels.
Without this patch, running -print-predicateinfo on a reasonably large
module produces slightly different output on each run.
This patch uses the dominator trees DFSInNum to order instruction from
different BBs, which should enforce a deterministic ordering and
guarantee that dominated instructions come after the instructions that
dominate them.
Reviewers: dberlin, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D48230
llvm-svn: 335150
The purpose of this utility is to make it easier for optimizations to
insert replacement dbg.values for instructions they are deleting. This
is useful in situations where salvageDebugInfo is inapplicable, say,
because the new dbg.value cannot refer to an operand of the dying value.
The utility is called insertReplacementDbgValues.
It assumes that the instruction 'From' is going to be deleted, and
inserts replacement dbg.values for each debug user of 'From'. The
newly-inserted dbg.values refer to 'To' instead of 'From'. Each
replacement dbg.value has the same location and variable as the debug
user it replaces, has a DIExpression determined by the result of
'RewriteExpr' applied to an old debug user of 'From', and is placed
before 'InsertBefore'.
This should simplify future patches, like D48331.
llvm-svn: 335144
This is a fixup for r334830 causing problems in polly-aosp buildbot.
Focus in r334830 was to fix a problem seen with
ConvertDebugDeclareToDebugValue involving store instructions.
It also added some asserts to find out of similar problems
existed for the ConvertDebugDeclareToDebugValue functions
involving load and phi instructions. One of those asserts seems
to blow in the polly-aosp buildbot, so I'll revert the asserts
while debugging.
llvm-svn: 335031
This patch adds logic to deal with the following constructions:
%iv = phi i64 ...
%trunc = trunc i64 %iv to i32
%cmp = icmp <pred> i32 %trunc, %invariant
Replacing it with
%iv = phi i64 ...
%cmp = icmp <pred> i64 %iv, sext/zext(%invariant)
In case if it is legal. Specifically, if `%iv` has signed comparison users, it is
required that `sext(trunc(%iv)) == %iv`, and if it has unsigned comparison
uses then we require `zext(trunc(%iv)) == %iv`. The current implementation
bails if `%trunc` has other uses than `icmp`, but in theory we can handle more
cases here (e.g. if the user of trunc is bitcast).
Differential Revision: https://reviews.llvm.org/D47928
Reviewed By: reames
llvm-svn: 335020
This reverts commit f976cf4cca0794267f28b54e468007fd476d37d9.
I am reverting this because it causes break in a few bots and its going
to take me sometime to look at this.
llvm-svn: 334993
Summary:
Simplify blockaddress usage before giving up in MergeBlockIntoPredecessor
This is a missing small optimization in MergeBlockIntoPredecessor.
This helps with one simplifycfg test which expects this case to be handled.
Reviewers: davide, spatel, brzycki, asbirlea
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48284
llvm-svn: 334992
This is r334704 (which was reverted in r334732) with a fix for
types like x86_fp80. We need to use getTypeAllocSizeInBits and
not getTypeStoreSizeInBits to avoid dropping debug info for
such types.
Original commit msg:
> Summary:
> Do not convert a DbgDeclare to DbgValue if the store
> instruction only refer to a fragment of the variable
> described by the DbgDeclare.
>
> Problem was seen when for example having an alloca for an
> array or struct, and there were stores to individual elements.
> In the past we inserted a DbgValue intrinsics for each store,
> just as if the store wrote the whole variable.
>
> When handling store instructions we insert a DbgValue that
> indicates that the variable is "undefined", as we do not know
> which part of the variable that is updated by the store.
>
> When ConvertDebugDeclareToDebugValue is used with a load/phi
> instruction we assert that the referenced value is large enough
> to cover the whole variable. Afaict this should be true for all
> scenarios where those methods are used on trunk. If the assert
> blows in the future I guess we could simply skip to insert a
> dbg.value instruction.
>
> In the future I think we should examine which part of the variable
> that is accessed, and add a DbgValue instrinsic with an appropriate
> DW_OP_LLVM_fragment expression.
>
> Reviewers: dblaikie, aprantl, rnk
>
> Reviewed By: aprantl
>
> Subscribers: JDevlieghere, llvm-commits
>
> Tags: #debug-info
>
> Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334830
Summary:
Do not convert a DbgDeclare to DbgValue if the store
instruction only refer to a fragment of the variable
described by the DbgDeclare.
Problem was seen when for example having an alloca for an
array or struct, and there were stores to individual elements.
In the past we inserted a DbgValue intrinsics for each store,
just as if the store wrote the whole variable.
When handling store instructions we insert a DbgValue that
indicates that the variable is "undefined", as we do not know
which part of the variable that is updated by the store.
When ConvertDebugDeclareToDebugValue is used with a load/phi
instruction we assert that the referenced value is large enough
to cover the whole variable. Afaict this should be true for all
scenarios where those methods are used on trunk. If the assert
blows in the future I guess we could simply skip to insert a
dbg.value instruction.
In the future I think we should examine which part of the variable
that is accessed, and add a DbgValue instrinsic with an appropriate
DW_OP_LLVM_fragment expression.
Reviewers: dblaikie, aprantl, rnk
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334704
IndVarSimplify sometimes makes transforms basing on users that are trivially dead. In particular,
if DCE wasn't run before it, there may be a dead `sext/zext` in loop that will trigger widening
transforms, however it makes no sense to do it.
This patch teaches IndVarsSimplify ignore the mist trivial cases of that.
Differential Revision: https://reviews.llvm.org/D47974
Reviewed By: sanjoy
llvm-svn: 334567
Currently SmallSet<PointerTy> inherits from SmallPtrSet<PointerTy>. This
patch replaces such types with SmallPtrSet, because IMO it is slightly
clearer and allows us to get rid of unnecessarily including SmallSet.h
Reviewers: dblaikie, craig.topper
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D47836
llvm-svn: 334492
SmallSet forwards to SmallPtrSet for pointer types. SmallPtrSet supports iteration, but a normal SmallSet doesn't. So if it wasn't for the forwarding, this wouldn't work.
These places were found by hiding the begin/end methods in the SmallSet forwarding
llvm-svn: 334343
We do the same thing in rewriteSingleStoreAlloca.
Fixes PR37632.
Reviewers: chandlerc, davide, efriedma
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D47825
llvm-svn: 334187
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
be both simpler and substantially more efficient.
Rather than use a hand-rolled iteration technique that isn't quite the
same as RPO, use the pre-built RPO loop body traversal utility.
Once visiting the loop body in RPO, we can assert that we visit defs
before uses reliably. When this is the case, the only need to iterate is
when simplifying a def that is used by a PHI node along a back-edge.
With this patch, the first pass over the loop body is just a complete
simplification of every instruction across the loop body. When we
encounter a use of a simplified instruction that stems from a PHI node
in the loop body that has already been visited (due to some cyclic CFG,
potentially the loop itself, or a nested loop, or unstructured control
flow), we recall that specific PHI node for the second iteration.
Nothing else needs to be preserved from iteration to iteration.
On the second and later iterations, only instructions known to have
simplified inputs are considered, each time starting from a set of PHIs
that had simplified inputs along the backedges.
Dead instructions are collected along the way, but deleted in a batch at
the end of each iteration making the iterations themselves substantially
simpler. This uses a new batch API for recursively deleting dead
instructions.
This alsa changes the routine to visit subloops. Because simplification
is fundamentally transitive, we may need to visit the entire loop body,
including subloops, to handle knock-on simplification.
I've added a basic test file that helps demonstrate that all of these
changes work. It includes both straight-forward loops with
simplifications as well as interesting PHI-structures, CFG-structures,
and a nested loop case.
Differential Revision: https://reviews.llvm.org/D47407
llvm-svn: 333461
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now-jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
llvm-svn: 333358
Also, produce the canonical IR abs (s<0) to be more efficient.
This is the libcall equivalent of the clang builtin change from:
rL333038
Pasting from that commit message:
The stdlib functions are defined in section 7.20.6.1 of the C standard with:
"If the result cannot be represented, the behavior is undefined."
That lets us mark the negation with 'nsw' because "sub i32 0, INT_MIN" would
be UB/poison.
llvm-svn: 333042
Summary: Previous patch does not care if a value is changed between calloc and strlen. This needs to be removed from InstCombine and maybe moved to DSE later after some rework.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47218
llvm-svn: 333022
Summary:
When lowerswitch merge several cases into a new default block it's not
updating the PHI nodes accordingly. The code that update the PHI nodes
for the default edge only update the first entry and do not remove the
remaining ones, to make sure the number of entries match the number of
predecessors.
This is easily fixed by replacing the code that update the PHI node with
the already existing utility function for updating PHI nodes.
Reviewers: hans, reames, arsenm
Reviewed By: arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D47055
llvm-svn: 332960
Summary:
In LoopVersioning::addPHINodes we need to iterate over all
users for a value "Inst", and if the user is outside of the
VersionedLoop we should replace the use of "Inst" by using
the value "PN" instead.
Replacing the use of "Inst" for a user of "Inst" also means
that Inst->users() is modified. So it is not safe to do the
replace while iterating over Inst->users() as we used to do.
This patch splits the task into two steps. First we iterate
over Inst->users() to find all users that should be updated.
Those users are saved into a local data structure on the stack.
And then, in the second step, we do the actual updates. This
time iterating over the local data structure.
Reviewers: mzolotukhin, anemet
Reviewed By: mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47134
llvm-svn: 332958
The evaluator goes through BB and creates global vars as temporary values to evaluate
results of LLVM instructions. It creates undef for alloca, however it assumes alloca
in addr space 0. If the next instruction is addrspace cast to 0, then we get an invalid
cast instruction.
This patch let the temp global var have an address space matching alloca addr space,
so that the valuation can be done.
Differential Revision: https://reviews.llvm.org/D47081
llvm-svn: 332794
Eric Christopher