This reverts commit 80a34ae311 with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
If the target has FP64 but not FP16 then we have custom lowering for FP_EXTEND
and STRICT_FP_EXTEND with type f64. However if the extend is from f32 to f64 the
current implementation will cause in infinite loop for STRICT_FP_EXTEND due to
emitting a merge_values of the original node which after replacement becomes a
merge_values of itself.
Fix this by not doing anything for f32 to f64 extend when we have FP64, though
for STRICT_FP_EXTEND we have to do the strict-to-nonstrict mutation as that
doesn't happen automatically for opcodes with custom lowering.
Differential Revision: https://reviews.llvm.org/D74559
Simon pointed out that this function is doing a bitcast, which can be
incorrect for big endian. That makes the lowering of VMOVN in MVE
wrong, but the function is shared between Neon and MVE so both can
be incorrect.
This attempts to fix things by using the newly added VECTOR_REG_CAST
instead of the BITCAST. As it may now be used on Neon, I've added the
relevant patterns for it there too. I've also added a quick dag combine
for it to remove them where possible.
Differential Revision: https://reviews.llvm.org/D74485
Summary:
GNU objdump prints the file format in lowercase, e.g. `elf64-x86-64`. llvm-objdump prints `ELF64-x86-64` right now, even though piping that into llvm-objcopy refuses that as a valid arch to use.
As an example of a problem this causes, see: https://github.com/ClangBuiltLinux/linux/issues/779
Reviewers: MaskRay, jhenderson, alexshap
Reviewed By: MaskRay
Subscribers: tpimh, sbc100, grimar, jvesely, nhaehnle, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74433
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
Printing floating point number in decimal is inconvenient for humans.
Verbose asm output will print out floating point values in comments, it
helps.
But in lots of cases, users still need additional work to covert the
decimal back to hex or binary to check the bit patterns,
especially when there are small precision difference.
Hexadecimal form is one of the supported form in LLVM IR, and easier for
debugging.
This patch try to print all FP constant in hex form instead.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D73566
The type passed to lower was invalid, so I'm not sure how this was
even working before. The source and destination type also do not have
to match, so make sure to use the right ones.
This reverts commit ed29dbaafa.
I'm backing out D68945, which as the discussion for D73526 shows, doesn't
seem to handle the -O0 path through the codegen backend correctly. I'll
reland the patch when a fix is worked out, apologies for all the churn.
The two parent commits are part of this revert too.
Conflicts:
llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
llvm/test/DebugInfo/X86/dbg-addr-dse.ll
SelectionDAGBuilder conflict is due to a nearby change in e39e2b4a79
that's technically unrelated. dbg-addr-dse.ll conflicted because
41206b61e3 (legitimately) changes the order of two lines.
There are further modifications to dbg-value-func-arg.ll: it landed after
the patch being reverted, and I've converted indirection to be represented
by the isIndirect field rather than DW_OP_deref.
This test case was XFAIL'ed because the peepholer was missing an optimisation.
But the peepholer is now able to handle this case, so enable this test. I will
close the corresponding and very old PR11364.
Followup to D73135. If the target doesn't have hard float (default
for ARM), then we assert when trying to soften the result of vector
reduction intrinsics. This patch marks these for expansion as well.
(A bit odd to use vectors on a target without hard float ... but
that's where you end up if you expose target-independent vector types.)
Differential Revision: https://reviews.llvm.org/D73854
These can be lowered to code sequences using CMPFP and CMPFPE which then get
selected to VCMP and VCMPE. The implementation isn't fully correct, as the chain
operand isn't handled correctly, but resolving that looks like it would involve
changes around FPSCR-handling instructions and how the FPSCR is modelled.
The fp-intrinsics test was already testing some of this but as the entire test
was being XFAILed it wasn't noticed. Un-XFAIL the test and instead leave the
cases where we aren't generating the right instruction sequences as FIXME.
Differential Revision: https://reviews.llvm.org/D73194
This reverts commit e34801c8e6 and the followup due to multiple
problems.
I've tried to keep the tests and RDA parts where possible, as those
still seem useful.
fadd/fmul reductions without reassoc are lowered to
VECREDUCE_STRICT_FADD/FMUL nodes, which don't have legalization
support. Until that is in place, expand these intrinsics on
ARM and AArch64. Other targets always expand the vector reduction
intrinsics.
Additionally expand fmax/fmin reductions without nonan flag on
AArch64, as the backend asserts that the flag is present when
lowering VECREDUCE_FMIN/FMAX.
This fixes https://bugs.llvm.org/show_bug.cgi?id=44600.
Differential Revision: https://reviews.llvm.org/D73135
For `MC_GlobalAddress` operands referencing **certain** GlobalObjects,
we can lower them to STB_LOCAL aliases to avoid costs brought by
assembler/linker's conservative decisions about symbol interposition:
* An assembler conservatively assumes a global default visibility symbol interposable (ELF
semantics). So relocations in object files are needed even if the code generator assumed
the definition exact and non-interposable.
* The relocations can cause the creation of PLT entries on some targets for -shared links.
A linker conservatively assumes a global default visibility symbol interposable (if not
otherwise constrained by -Bsymbolic/--dynamic-list/VER_NDX_LOCAL/etc).
"certain" refers to GlobalObjects in the intersection of
`hasExactDefinition() and !isInterposable()`: `external`, `appending`, `internal`, `private`.
Local linkages (`internal` and `private`) cannot be interposed. `appending` is for very
few objects LLVM interpret specially. So the set just includes `external`.
This patch emits STB_LOCAL aliases (.Lfoo$local) for such GlobalObjects, so that targets can lower
MC_GlobalAddress operands to STB_LOCAL aliases if applicable.
We may extend the scope and include GlobalAlias in the future.
LLVM's existing -fno-semantic-interposition behaviors give us license to do such optimizations:
* Various optimizations (ipconstprop, inliner, sccp, sroa, etc) treat normal ExternalLinkage
GlobalObjects as non-interposable.
* Before D72197, MC resolved a PC-relative VK_None fixup to a non-local symbol at assembly time (no
outstanding relocation), if the target is defined in the same section. Put it simply, even if IR
optimizations failed to optimize and allowed interposition for the function call in
`void foo() {} void bar() { foo(); }`, the assembler would disallow it.
This patch sets up AsmPrinter infrastructure to make -fno-semantic-interposition more so.
With and without the patch, the object file output should be identical:
`.Lfoo$local` does not take a symbol table entry.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D73228
This intention is to move patchable-function before aarch64-branch-targets
(configured in AArch64PassConfig::addPreEmitPass) so that we emit BTI before NOPs
(see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92424).
This also allows addPreEmitPass() passes to know the precise instruction sizes if they want.
Tried x86-64 Debug/Release builds of ccls with -fxray-instrument -fxray-instruction-threshold=1.
No output difference with this commit and the previous commit.
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma, andreadb
Reviewed By: efriedma
Subscribers: gbedwell, john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
Some target like arm/riscv with soft-float will have compiling crash when using -fno-unsafe-math-optimization option.
This patch will add the missing strict FP support to SoftenFloatRes_XINT_TO_FP.
Differential Revision: https://reviews.llvm.org/D72277
As detailed in https://blog.regehr.org/archives/1709 we don't make use of the known leading/trailing zeros for shifted values in cases where we don't know the shift amount value.
This patch adds support to SelectionDAG::ComputeKnownBits to use KnownBits::countMinTrailingZeros and countMinLeadingZeros to set the minimum guaranteed leading/trailing known zero bits.
Differential Revision: https://reviews.llvm.org/D72573
Summary:
Avoid using the `nocf_check` attribute with Control Flow Guard. Instead, use a
new `"guard_nocf"` function attribute to indicate that checks should not be
added on indirect calls within that function. Add support for
`__declspec(guard(nocf))` following the same syntax as MSVC.
Reviewers: rnk, dmajor, pcc, hans, aaron.ballman
Reviewed By: aaron.ballman
Subscribers: aaron.ballman, tomrittervg, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72167
Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma
Reviewed By: efriedma
Subscribers: john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
Architecturally, it's allowed to have MVE-I without an FPU, thus
-mfpu=none should not disable MVE-I, or moves to/from FP-registers.
This patch removes `+/-fpregs` from features unconditionally added to
target feature list, depending on FPU and moves the logic to Clang
driver, where the negative form (`-fpregs`) is conditionally added to
the target features list for the cases of `-mfloat-abi=soft`, or
`-mfpu=none` without either `+mve` or `+mve.fp`. Only the negative
form is added by the driver, the positive one is derived from other
features in the backend.
Differential Revision: https://reviews.llvm.org/D71843
Adds a pass to the ARM backend that takes a v4i32
gather and transforms it into a call to MVE's
masked gather intrinsics.
Differential Revision: https://reviews.llvm.org/D71743
This is a recommit of D71330, but with a few things fixed and changed:
1) ReachingDefAnalysis: this was not running with optnone as it was checking
skipFunction(), which other analysis passes don't do. I guess this is a
copy-paste from a codegen pass.
2) VPTBlockPass: here I've added skipFunction(), because like most/all
optimisations, we don't want to run this with optnone.
This fixes the issues with the initial/previous commit: the VPTBlockPass was
running with optnone, but ReachingDefAnalysis wasn't, and so VPTBlockPass was
crashing querying ReachingDefAnalysis.
I've added test case mve-vpt-block-optnone.mir to check that we don't run
VPTBlock with optnone.
Differential Revision: https://reviews.llvm.org/D71470
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
We were previously unconditionally using the ARM::TRAP opcode, even
under Thumb. My understanding is that these are essentially the same
thing (they both result in a trap under Thumb), but the ARM::TRAP opcode
is marked as requiring IsARM, so it is more correct to use ARM::tTRAP.
Differential Revision: https://reviews.llvm.org/D72075
This adds extra scalar handling to isFMAFasterThanFMulAndFAdd, allowing
the target independent code to handle more folds in more situations (for
example if the fast math flags are present, but the global
AllowFPOpFusion option isnt). It also splits apart the HasSlowFPVMLx
into HasSlowFPVFMx, to allow VFMA and VMLA to be controlled separately
if needed.
Differential Revision: https://reviews.llvm.org/D72139
This patch attempts to peek through vectors based on the demanded bits/elt of a particular ISD::EXTRACT_VECTOR_ELT node, allowing us to avoid dependencies on ops that have no impact on the extract.
In particular this helps remove some unnecessary scalar->vector->scalar patterns.
The wasm shift patterns are annoying - @tlively has indicated that the wasm vector shift codegen are to be refactored in the near-term and isn't considered a major issue.
Reapplied after reversion at rL368660 due to PR42982 which was fixed at rGca7fdd41bda0.
Differential Revision: https://reviews.llvm.org/D65887
For now, we didn't set the default operation action for SIGN_EXTEND_INREG for
vector type, which is 0 by default, that is legal. However, most target didn't
have native instructions to support this opcode. It should be set as expand by
default, as what we did for ANY_EXTEND_VECTOR_INREG.
Differential Revision: https://reviews.llvm.org/D70000
Some of the instructions in these tests were technically invalid
combinations (using ARM opcodes in Thumb mode, for example). Update the
targets and the instructions used to be more correct.
This moves the X86 specific transform from rL364407
into DAGCombiner to generically handle 'little to big' cases
(for example: extract_subvector(v2i64 bitcast(v16i8))). This
allows us to remove both the x86 implementation and the aarch64
bitcast(extract_subvector(bitcast())) combine.
Earlier patches that dealt with regressions initially exposed
by this patch:
rG5e5e99c041e4
rG0b38af89e2c0
Patch by: @RKSimon (Simon Pilgrim)
Differential Revision: https://reviews.llvm.org/D63815
As the extern_weak target might be missing, resolving to the absolute
address zero, we can't use the normal direct PC-relative branch
instructions (as that would result in relocations out of range).
Instead check the shouldAssumeDSOLocal method and load the address
from a COFF stub.
This matches what was done for X86 in 6bf108d77a.
Differential Revision: https://reviews.llvm.org/D71720
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
Reviewers: dmgreen, efriedma, john.brawn
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
This reverts commit 1f3dd83cc1, reapplying
commit bb1b0bc4e5.
The original commit failed on some builds seemingly due to the use of a
bracketed constructor with an std::array, i.e. `std::array<> arr({...})`.
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. This patch enables the salvaging of casts by using the
DW_OP_LLVM_convert operator for SExt and Trunc instructions.
There is another issue which is exposed by this fix, in which fragment
DIExpressions (which are preserved more readily by this patch) for
values that must be split across registers in ISel trigger an assertion,
as the 'split' fragments extend beyond the bounds of the fragment
DIExpression causing an error. This patch also fixes this issue by
checking the fragment status of DIExpressions which are to be split, and
dropping fragments that are invalid.
The following intrinsics currently carry a rounding mode metadata argument:
llvm.experimental.constrained.minnum
llvm.experimental.constrained.maxnum
llvm.experimental.constrained.ceil
llvm.experimental.constrained.floor
llvm.experimental.constrained.round
llvm.experimental.constrained.trunc
This is not useful since the semantics of those intrinsics do not in any way
depend on the rounding mode. In similar cases, other constrained intrinsics
do not have the rounding mode argument. Remove it here as well.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71218
The big switch in `ARMBaseInstrInfo::getNumMicroOps` is missing cases for
`VLLDM` and `VLSTM`, which are currently defined with itineraries having a
dynamic count of micro-ops.
Assuming an optimistic case in which these instruction do not actually perform
loads or stores, and with the idea that Armv8-m cores are supposed to use the
new style scheduling models, this patch just sets the itinerary for those two
instructions to `NoItinerary`.
Differential Revision: https://reviews.llvm.org/D71266
This reverts commit 9468e3334b.
There's a test that doesn't like this change. The RDA analysis
gets invalided by changes in the block, which is not taken into
account. Revert while I work on a fix for this.
This adds ReachingDefAnalysis (RDA) to the VPTBlock pass, so that we can
reimplement findVCMPToFoldIntoVPS with just a few calls to RDA.
Differential Revision: https://reviews.llvm.org/D71330
During SelectionDAG, if a value which is associated with a DBG_VALUE
needs to be split across multiple registers, the DBG_VALUE will be split
into a set of fragment expressions to recreate the original value.
If one or more of these fragments cannot be created, they would
previously be silently dropped, causing the old debug value to live past
its expiry date. This patch fixes this issue by keeping invalid
fragments while setting their value as Undef.
Differential revision: https://reviews.llvm.org/D70248
Summary:
This fixes PR44135.
The special case when we promote a bitcast from a vector to an int
needs special handling when we are on a big-endian target.
Prior to this fix, for the added vec_to_int we see the following in the
SelectionDAG printouts
Type-legalized selection DAG: %bb.1 'foo:bb.1'
SelectionDAG has 9 nodes:
t0: ch = EntryToken
t2: v8i16,ch = CopyFromReg t0, Register:v8i16 %0
t17: v4i32 = bitcast t2
t23: i32 = extract_vector_elt t17, Constant:i32<3>
t8: ch,glue = CopyToReg t0, Register:i32 $r0, t23
t9: ch = ARMISD::RET_FLAG t8, Register:i32 $r0, t8:1
and I think here the extract_vector_elt is wrong and extracts the value
from the wrong index.
The program program should return the 32 bits made up of the elements at
index 4 and 5 in the vec6 array, but with
t23: i32 = extract_vector_elt t17, Constant:i32<3>
as far as I can tell, we will extract values that originally didn't even
exist in the vec6 vectore.
If we would instead extract the element at index 2 we would get the wanted
values.
With this fix we insert a right shift after the bitcast in
DAGTypeLegalizer::PromoteIntRes_BITCAST which then gives us
Type-legalized selection DAG: %bb.1 'vec_to_int:bb.1'
SelectionDAG has 9 nodes:
t0: ch = EntryToken
t2: v8i16,ch = CopyFromReg t0, Register:v8i16 %0
t23: v4i32 = bitcast t2
t27: i32 = extract_vector_elt t23, Constant:i32<2>
t8: ch,glue = CopyToReg t0, Register:i32 $r0, t27
t9: ch = ARMISD::RET_FLAG t8, Register:i32 $r0, t8:1
So now we get
t27: i32 = extract_vector_elt t23, Constant:i32<2>
which is what we want.
Similarly, the new int_to_vec testcase exposes a bug where we cast the other
direction. Then we instead need to add a left shift before the bitcast on
big-endian targets for the bits in the input integer to end up at the exptected
place in the vector.
Reviewers: bogner, spatel, craig.topper, t.p.northover, dmgreen, efriedma, SjoerdMeijer, samparker
Reviewed By: efriedma
Subscribers: eli.friedman, bjope, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70942
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
A second try after reverted D71072.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71149
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71072
https://reviews.llvm.org/D70922
This adds a hook to allow targets to define exactly what extension
operation should be performed for widening constants. This handles cases
like widening i1 true which would end up becoming -1 which affects code
quality during combines.
Additionally, in order to stay consistent with how DAG is promoting
constants, we now signextend for byte sized types and zero extend
otherwise (by default). Targets can of course override this if
necessary.
Convert ARMCodeGenPrepare into a generic type promotion pass by:
- Removing the insertion of arm specific intrinsics to handle narrow
types as we weren't using this.
- Removing ARMSubtarget references.
- Now query a generic TLI object to know which types should be
promoted and what they should be promoted to.
- Move all codegen tests into Transforms folder and testing using opt
and not llc, which is how they should have been written in the
first place...
The pass searches up from icmp operands in an attempt to safely
promote types so we can avoid generating unnecessary unsigned extends
during DAG ISel.
Differential Revision: https://reviews.llvm.org/D69556
Summary:
Add support for vcadd_* family of intrinsics. This set of intrinsics is
available in Armv8.3-A.
The fp16 versions require the FP16 extension, which has been available
(opt-in) since Armv8.2-A.
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70862
Summary:
In the cases where the CMOV (f16) SDNode is used with condition codes
LT, LE, VC or NE, it is successfully selected into a VSEL instruction.
In the remaining cases, however, instruction selection fails since VSEL
does not support other condition codes.
This patch handles such cases by using the single-precision version of
the VMOV instruction.
Reviewers: ostannard, dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70667
This replaces the A32 NEON vqadds, vqaddu, vqsubs and vqsubu intrinsics
with the target independent sadd_sat, uadd_sat, ssub_sat and usub_sat.
This helps generate vqadds from standard IR nodes, which might be
produced from the vectoriser. The old variants are removed in the
process.
Differential Revision: https://reviews.llvm.org/D69350
Add several new methods to ReachingDefAnalysis:
- getReachingMIDef, instead of returning an integer, return the
MachineInstr that produces the def.
- getInstFromId, return a MachineInstr for which the given integer
corresponds to.
- hasSameReachingDef, return whether two MachineInstr use the same
def of a register.
- isRegUsedAfter, return whether a register is used after a given
MachineInstr.
These methods have been used in ARMLowOverhead to replace searching
for uses/defs.
Differential Revision: https://reviews.llvm.org/D70009
This patch adds instruction selection patterns for the TT, TTT, TTA, and TTAT
instructions and tests for llvm.arm.cmse.tt, llvm.arm.cmse.ttt,
llvm.arm.cmse.tta, and llvm.arm.cmse.ttat intrinsics (added in a previous
patch).
Patch by Javed Absar.
Differential Revision: https://reviews.llvm.org/D70407
Provides support for using r6-r11 as globally scoped
register variables. This requires a -ffixed-rN flag
in order to reserve rN against general allocation.
If for a given GRV declaration the corresponding flag
is not found, or the the register in question is the
target's FP, we fail with a diagnostic.
Differential Revision: https://reviews.llvm.org/D68862
Summary:
This adds a visitLocationList function to the DWARF v4 location lists,
similar to what already exists for DWARF v5. It follows the approach
outlined in previous patches (D69672), where the parsed form is always
stored in the DWARF v5 format, which makes it easier for generic code to
be built on top of that. v4 location lists are "upgraded" during
parsing, and then this upgrade is undone while dumping.
Both "inline" and section-based dumping is rewritten to reuse the
existing "generic" location list dumper. This means that the output
format is consistent for all location lists (the only thing one needs to
implement is the function which prints the "raw" form of a location
list), and that debug_loc dumping correctly processes base address
selection entries, etc.
The previous existing debug_loc functionality (e.g.,
parseOneLocationList) is rewritten on top of the new API, but it is not
removed as there is still code which uses them. This will be done in
follow-up patches, after I build the API to access the "interpreted"
location lists in a generic way (as that is what those users really
want).
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69847
During register coalescing, we update the live-intervals on-the-fly.
To do that we are in this strange mode where the live-intervals can
be slightly out-of-sync (more precisely they are forward looking)
compared to what the IR actually represents.
This happens because the register coalescer only updates the IR when
it is done with updating the live-intervals and it has to do it this
way because updating the IR on-the-fly would actually clobber some
information on how the live-ranges that are being updated look like.
This is problematic for updates that rely on the IR to accurately
represents the state of the live-ranges. Right now, we have only
one of those: stripValuesNotDefiningMask.
To reconcile this need of out-of-sync IR, this patch introduces a
new argument to LiveInterval::refineSubRanges that allows the code
doing the live range updates to reason about how the code should
look like after the coalescer will have rewritten the registers.
Essentially this captures how a subregister index with be offseted
to match its position in a new register class.
E.g., let say we want to merge:
V1.sub1:<2 x s32> = COPY V2.sub3:<4 x s32>
We do that by choosing a class where sub1:<2 x s32> and sub3:<4 x s32>
overlap, i.e., by choosing a class where we can find "offset + 1 == 3".
Put differently we align V2's sub3 with V1's sub1:
V2: sub0 sub1 sub2 sub3
V1: <offset> sub0 sub1
This offset will look like a composed subregidx in the the class:
V1.(composed sub2 with sub1):<4 x s32> = COPY V2.sub3:<4 x s32>
=> V1.(composed sub2 with sub1):<4 x s32> = COPY V2.sub3:<4 x s32>
Now if we didn't rewrite the uses and def of V1, all the checks for V1
need to account for this offset to match what the live intervals intend
to capture.
Prior to this patch, we would fail to recognize the uses and def of V1
and would end up with machine verifier errors: No live segment at def.
This could lead to miscompile as we would drop some live-ranges and
thus, miss some interferences.
For this problem to trigger, we need to reach stripValuesNotDefiningMask
while having a mismatch between the IR and the live-ranges (i.e.,
we have to apply a subreg offset to the IR.)
This requires the following three conditions:
1. An update of overlapping subreg lanes: e.g., dsub0 == <ssub0, ssub1>
2. An update with Tuple registers with a possibility to coalesce the
subreg index: e.g., v1.dsub_1 == v2.dsub_3
3. Subreg liveness enabled.
looking at the IR to decide what is alive and what is not, i.e., calling
stripValuesNotDefiningMask.
coalescer maintains for the live-ranges information.
None of the targets that currently use subreg liveness (i.e., the targets
that fulfill #3, Hexagon, AMDGPU, PowerPC, and SystemZ IIRC) expose #1 and
and #2, so this patch also artificial enables subreg liveness for ARM,
so that a nice test case can be attached.
Summary:
G_GEP is rather poorly named. It's a simple pointer+scalar addition and
doesn't support any of the complexities of getelementptr. I therefore
propose that we rename it. There's a G_PTR_MASK so let's follow that
convention and go with G_PTR_ADD
Reviewers: volkan, aditya_nandakumar, bogner, rovka, arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, arphaman, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69734
This feature controls whether AA is used into the backend, and was
previously turned on for certain subtargets to help create less
constrained scheduling graphs. This patch turns it on for all
subtargets, so that they can all make use of the extra information to
produce better code.
Differential Revision: https://reviews.llvm.org/D69796
In the ARM backend, for historical reasons we have only some targets
using Machine Scheduling. The rest use the old list scheduler as they
are using itinaries and the list scheduler seems to produce better code
(and not crash running out of register on v6m codes). So whether to use
the MIScheduler or not is checked at runtime from the subtarget
features.
This is fine, except for post-ra scheduling. Whether to use the old
post-ra list scheduler or the post-ra machine schedule is decided as the
pass manager is set up, in arms case from a newly constructed subtarget.
Under some situations, like LTO, this won't include the correct cpu so
can pick the wrong option. This can have a surprising effect on
performance.
To fix that, this patch overrides targetSchedulesPostRAScheduling and
addPreSched2 in the ARM backend, adding _both_ post-ra schedulers and
picking at runtime which to execute. To pick between the two I've had to
add a enablePostRAMachineScheduler() method that normally returns
enableMachineScheduler() && enablePostRAScheduler(), which can be
overridden to enable just one of PostRAMachineScheduler vs
PostRAScheduler.
Thanks to David Penry for the identifying this problem.
Differential Revision: https://reviews.llvm.org/D69775
With a few things fixed:
- initialisaiton of the optimisation remark pass (this was causing the buildbot
failures on PPC),
- a test case.
Differential Revision: https://reviews.llvm.org/D69660
This adds a flag to LLVM and clang to always generate a .debug_frame
section, even if other debug information is not being generated. In
situations where .eh_frame would normally be emitted, both .debug_frame
and .eh_frame will be used.
Differential Revision: https://reviews.llvm.org/D67216
Fangrui Song