This can happen in cases where TableGen generated asm matcher cannot check
whether a register operand is in the right register class. e.g. mem operands.
rdar://8204588
llvm-svn: 136292
llvm-mc gives an "invalid operand" error for instructions that take an unsigned
immediate which have the high bit set such as:
pblendw $0xc5, %xmm2, %xmm1
llvm-mc treats all x86 immediates as signed values and range checks them.
A small number of x86 instructions use the imm8 field as a set of bits.
This change only changes those instructions and where the high bit is not
ignored. The others remain unchanged.
llvm-svn: 136287
Encode the width operand as it encodes in the instruction, which simplifies
the disassembler and the encoder, by using the imm1_32 operand def. Add a
diagnostic for the context-sensitive constraint that the width must be in
the range [1,32-lsb].
llvm-svn: 136264
Refactor the rest of the extend instructions to not artificially distinguish
between a rotate of zero and a rotate of any other value. Replace the by-zero
versions with Pat<>'s for ISel.
llvm-svn: 136226
Refactor the SXTB, SXTH, SXTB16, UXTB, UXTH, and UXTB16 instructions to not
have an 'r' and an 'r_rot' version, but just a single version with a rotate
that can be zero. Use plain Pat<>'s for the ISel of the non-rotated version.
llvm-svn: 136225
usage of the shuffle bitmask. Both work in 128-bit lanes without
crossing, but in the former the mask of the high part is the same
used by the low part while in the later both lanes have independent
masks. Handle this properly and and add support for vpermilpd.
llvm-svn: 136200
When splitting global live ranges, it is now possible to split for
multiple destination intervals at once. Previously, we only had the main
and stack intervals.
Each edge bundle is assigned to a split candidate, and splitAroundRegion
will insert copies between the candidate intervals and the stack
interval as needed.
The multi-way splitting is used to split around compact regions when
enabled with -compact-regions. The best candidate register still gets
all the bundles it wants, but everything outside the main interval is
first split around compact regions before we create single-block
intervals.
Compact region splitting still causes some regressions, so it is not
enabled by default.
llvm-svn: 136186
These copies would coalesce easily, but the resulting value would be
defined by a deleted instruction. Now we also remove the undefined value
number from the destination register.
This fixes PR10503.
llvm-svn: 136174
On x86 we can't encode an immediate LHS of a sub directly. If the RHS comes from a XOR with a constant we can
fold the negation into the xor and add one to the immediate of the sub. Then we can turn the sub into an add,
which can be commuted and encoded efficiently.
This code is generated for __builtin_clz and friends.
llvm-svn: 136167
Allow the rot_imm operand to be optional. This sets the stage for refactoring
away the "rr" versions from the multiclasses and replacing them with Pat<>s.
llvm-svn: 136154
Start of cleaning this up a bit. First step is to remove the encoder hook by
storing the operand as the bits it'll actually encode to so it can just be
directly used. Map it to the assembly source values 8/16/24 when we print it.
llvm-svn: 136152
When dead code elimination deletes a PHI value, the virtual register may
split into multiple connected components. In that case, revert each
component to the RS_Assign stage.
The new components are guaranteed to be smaller (the original value
numbers are distributed among the components), so this will always be
making progress. The components are now allowed to evict other live
ranges or be split again.
llvm-svn: 136034
The first problem to fix is to stop creating synthetic *Table_gen
targets next to all of the LLVM libraries. These had no real effect as
CMake specifies that add_custom_command(OUTPUT ...) directives (what the
'tablegen(...)' stuff expands to) are implicitly added as dependencies
to all the rules in that CMakeLists.txt.
These synthetic rules started to cause problems as we started more and
more heavily using tablegen files from *subdirectories* of the one where
they were generated. Within those directories, the set of tablegen
outputs was still available and so these synthetic rules added them as
dependencies of those subdirectories. However, they were no longer
properly associated with the custom command to generate them. Most of
the time this "just worked" because something would get to the parent
directory first, and run tablegen there. Once run, the files existed and
the build proceeded happily. However, as more and more subdirectories
have started using this, the probability of this failing to happen has
increased. Recently with the MC refactorings, it became quite common for
me when touching a large enough number of targets.
To add insult to injury, several of the backends *tried* to fix this by
adding explicit dependencies back to the parent directory's tablegen
rules, but those dependencies didn't work as expected -- they weren't
forming a linear chain, they were adding another thread in the race.
This patch removes these synthetic rules completely, and adds a much
simpler function to declare explicitly that a collection of tablegen'ed
files are referenced by other libraries. From that, we can add explicit
dependencies from the smaller libraries (such as every architectures
Desc library) on this and correctly form a linear sequence. All of the
backends are updated to use it, sometimes replacing the existing attempt
at adding a dependency, sometimes adding a previously missing dependency
edge.
Please let me know if this causes any problems, but it fixes a rather
persistent and problematic source of build flakiness on our end.
llvm-svn: 136023
shuffle before inserting on a 256-bit vector.
- Add AVX versions of movd/movq instructions
- Introduce a few COPY patterns to match insert_subvector instructions.
This turns a trivial insert_subvector instruction into a register copy,
coalescing the xmm into a ymm and avoid emiting on more instruction.
llvm-svn: 136002
Fix the Rn register encoding for both SSAT and USAT. Update the parsing of the
shift operand to correctly handle the allowed shift types and immediate ranges
and issue meaningful diagnostics when an illegal value or shift type is
specified. Add aliases to parse an ommitted shift operand (default value of
'lsl #0').
Add tests for diagnostics and proper encoding.
llvm-svn: 135990
assert-path code, as previously we would have fallen off the end of the
function, but please review and let me know if this should go somewhere
else.
This fixes a Clang warning:
lib/MC/MCMachOStreamer.cpp:201:11: error: enumeration value 'MCSA_IndirectSymbol' not handled in switch [-Werror,-Wswitch-enum]
switch (Attribute) {
^
1 error generated.
llvm-svn: 135976
The shift immediate encoding, printing, etc. is handled directly by the
enclosing operand definition, so it should be a vanilla immediate, not a
nested complex operand (shift_imm).
llvm-svn: 135968
Remove some inititalizers that are the same as the default, move defs next to
their (singular) uses and generally simplify some formatting of asm operand
definitions.
llvm-svn: 135946
unwind encoding for that function. This simply crawls through the prolog looking
for machine instrs marked as "frame setup". It can calculate from these what the
compact unwind should look like.
This is currently disabled because of needed linker support. But initial tests
look good.
llvm-svn: 135922
The .local, .hidden, .internal, and .protected are not legal for all supported
file formats (in particular, they're invalid for MachO). Move the parsing for
them into the ELF assembly parser since that's the format they're for.
Similarly, .weak is used by COFF and ELF, but not MachO, so move the parsing
to the COFF and ELF asm parsers. Previously, using any of these directives
on Darwin would result in an assertion failure in the parser; now we get
a diagnostic as we should.
rdar://9827089
llvm-svn: 135921
This mechanism already exists, but the RS_Split2 stage makes it clearer.
When live range splitting creates ranges that may not be making
progress, they are marked RS_Split2 instead of RS_New. These ranges may
be split again, but only in a way that can be proven to make progress.
For local ranges, that means they must be split into ranges used by
strictly fewer instructions.
For global ranges, region splitting is bypassed and the RS_Split2
ranges go straight to per-block splitting.
llvm-svn: 135912
The stage is used to control where a live range is going, not where it
is coming from. Live ranges created by splitting will usually be marked
RS_New, but some are marked RS_Spill to avoid wasting time trying to
split them again.
The old RS_Global and RS_Local stages are merged - they are really the
same thing for local and global live ranges.
llvm-svn: 135911
This fixes PR10463. A two-address instruction with an <undef> use
operand was incorrectly rewritten so the def and use no longer used the
same register, violating the tie constraint.
Fix this by always rewriting <undef> operands with the register a def
operand would use.
llvm-svn: 135885
This method computes the edge bundles that should be live when splitting
around a compact region. This is independent of interference.
The function returns false if the live range was already a compact
region, or the compact region doesn't have any live bundles - it would
be the same as splitting around basic blocks.
Compact regions are computed using the normal spill placement code. We
pretend there is interference in all live-through blocks that don't use
the live range. This removes all edges from the Hopfield network used
for spill placement, so it converges instantly.
llvm-svn: 135847
If there is no interference and no last split point, we cannot
enterIntvBefore(Stop) - that function needs a real instruction.
Use enterIntvAtEnd instead for that very easy case.
This code doesn't currently run, it is needed by multi-way splitting.
llvm-svn: 135846
A split candidate can have a null PhysReg which means that it doesn't
map to a real interference pattern. Instead, pretend that all through
blocks have interference.
This makes it possible to generate compact regions where the live range
doesn't go through blocks that don't use it. The live range will still
be live between directly connected blocks with uses.
Splitting around a compact region tends to produce a live range with a
high spill weight, so it may evict a less dense live range.
llvm-svn: 135845
This method matches addLinks - All the listed blocks are considered to
have interference, so they add a negative bias to their bundles.
This could also be done by addConstraints, but that requires building a
separate BlockConstraint array.
llvm-svn: 135844
The immediate is in the range 1-32, but is encoded as 0-31 in a 5-bit bitfield.
Update the representation such that we store the operand as 0-31, allowing us
to remove the encoder method and the special case handling in the disassembler.
Update the assembly parser and the instruction printer accordingly.
llvm-svn: 135823
The header file was already properly located. The previous need for it
in Support had to do with the version string printing which was fixed in
r135757.
Also update build dependencies where libraries that needed the
functionality of the Target library (in the form of the TargetRegistry)
were picking it up via Support. This is pretty pervasive, essentially
every TargetInfo library (ARMInfo, etc) uses TargetRegistry, making it
depend on Target. All of these were previously just sneaking by.
llvm-svn: 135760
the Support library. Now its part of the TargetRegistry, and the three
commands that care about this explicitly register this extra bit of
version information.
The set of commands which care was computed by intersecting those which
use the Support library's version string printing and those that
initialize all the registered targets in a way that produces
a meaningful list. The only odd ball out is that 'clang -cc1as -version'
no longer prints the registered targets. I don't think anyone is really
interested in that (especially as the fact that llvm-mc does so is under
a FIXME), but if someone really does want this back I'll happily apply
the same patch there.
llvm-svn: 135757
function on the TargetRegistry. Also clean it up and use the modern LLVM
utility libraries available instead of rolling a few things manually.
llvm-svn: 135756
register extra version information to be printed. This is designed to
allow those tools which link in various targets to also print those
registered targets under --version.
Currently this printing logic is embedded into the Support library
directly; a huge layering violation. This is the first step to hoisting
it out into the tools without adding lots of duplicated code.
llvm-svn: 135755
the way to go. Doing this here will prevent several node matches later,
and would have to force looking all the way through several
VINSERTF128/VEXTRACTF128 chains to optimize simple things.
llvm-svn: 135730
and was actually very wrong, fix it and make it simpler. Also remove the
ConcatVectors function, which is unused now.
- Fix a introduction of useless nodes in r126664 and r126264. The
VUNPCKL* should never be introduced cause we don't want duplicate
nodes for 128 AVX and non-AVX modes, the actual instruction
difference only exists during isel, but not for target specific DAG
nodes. We only introduce V* target nodes when there is no 128-bit
version already there.
- Fix a fragile test and make it more useful.
llvm-svn: 135729
size but different element types, so that it filters out the cases
that CreateShuffleVectorCast doesn't handle. This fixes rdar://9786827.
llvm-svn: 135721
Aliases for LDM/STM. The single-register versions should encode to LDR/STR
with writeback, but we don't (yet) get that correct. Neither does Darwin's
system assembler, though, so that's not a deal-breaker of a limitation.
llvm-svn: 135702
Stefanovic. I removed the part that actually emits the instructions cause
I want that to get in better shape first and in incremental steps. This
also makes it easier to review the upcoming parts.
llvm-svn: 135678
instruction introduced in AVX, which can operate on 128 and 256-bit vectors.
It considers a 256-bit vector as two independent 128-bit lanes. It can permute
any 32 or 64 elements inside a lane, and restricts the second lane to
have the same permutation of the first one. With the improved splat support
introduced early today, adding codegen for this instruction enable more
efficient 256-bit code:
Instead of:
vextractf128 $0, %ymm0, %xmm0
punpcklbw %xmm0, %xmm0
punpckhbw %xmm0, %xmm0
vinsertf128 $0, %xmm0, %ymm0, %ymm1
vinsertf128 $1, %xmm0, %ymm1, %ymm0
vextractf128 $1, %ymm0, %xmm1
shufps $1, %xmm1, %xmm1
movss %xmm1, 28(%rsp)
movss %xmm1, 24(%rsp)
movss %xmm1, 20(%rsp)
movss %xmm1, 16(%rsp)
vextractf128 $0, %ymm0, %xmm0
shufps $1, %xmm0, %xmm0
movss %xmm0, 12(%rsp)
movss %xmm0, 8(%rsp)
movss %xmm0, 4(%rsp)
movss %xmm0, (%rsp)
vmovaps (%rsp), %ymm0
We get:
vextractf128 $0, %ymm0, %xmm0
punpcklbw %xmm0, %xmm0
punpckhbw %xmm0, %xmm0
vinsertf128 $0, %xmm0, %ymm0, %ymm1
vinsertf128 $1, %xmm0, %ymm1, %ymm0
vpermilps $85, %ymm0, %ymm0
llvm-svn: 135662
refactor the code and add a bunch of comments. The final shuffle
emitted by handling 256-bit types is suitable for the VPERM shuffle
instruction which is going to be introduced in a next commit (with
a testcase which cover this commit)
llvm-svn: 135661
Move the shift operator and special value (32 encoded as 0 for PKHTB) handling
into the instruction printer. This cleans up a bit of the disassembler
special casing for these instructions, more easily handles not printing the
operand at all for "lsl #0" and prepares for correct asm parsing of these
operands.
llvm-svn: 135626
Move common definitions for ARM and Thumb2 into ARMInstrFormats.td and rename
them to be a bit more descriptive that they're for the PKH instructions.
llvm-svn: 135617
The shift type is implied by the instruction (PKHBT vs. PKHTB) and so shouldn't
be also encoded as part of the shift value immediate. Otherwise we're able to
represent invalid instructions, plus it needlessly complicates the
representation. Preparatory work for asm parsing of these instructions.
llvm-svn: 135616
- Introduce JITDefault code model. This tells targets to set different default
code model for JIT. This eliminates the ugly hack in TargetMachine where
code model is changed after construction.
llvm-svn: 135580
The system register spec should be case insensitive. The preferred form for
output with mask values of 4, 8, and 12 references APSR rather than CPSR.
Update and tidy up tests accordingly.
llvm-svn: 135532
Correct the handling of the 's' suffix when parsing ARM mode. It's only a
truly separate opcode in Thumb. Add test cases to make sure we handle
the s and condition suffices correctly, including diagnostics.
llvm-svn: 135513
Add range checking for the immediate operand and handle the "mov" mnemonic
choosing between encodings based on the value of the immediate. Add tests
for fixups, encoding choice and values, and diagnostic for out of range values.
llvm-svn: 135500
- In EmitAtomicBinaryPartword, mask incr in loopMBB only if atomic.swap is the
instruction being expanded, instead of masking it in thisMBB.
- Remove redundant Or in EmitAtomicCmpSwap.
llvm-svn: 135495
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
llvm-svn: 135468
to MCRegisterInfo. Also initialize the mapping at construction time.
This patch eliminate TargetRegisterInfo from TargetAsmInfo. It's another step
towards fixing the layering violation.
llvm-svn: 135424
For -disable-iv-rewrite, perform LFTR without generating a new
"canonical" induction variable. Instead find the "best" existing
induction variable for use in the loop exit test and compute the final
value of that IV for use in the new loop exit test. In short,
convert to a simple eq/ne exit test as long as it's cheap to do so.
llvm-svn: 135420
moving them out of the loop. Previously, stores and loads to a stack frame
object were inserted to accomplish this. Remove the code that was needed to do
this. Patch by Sasa Stankovic.
llvm-svn: 135415
Original Log: Get rid of the separate opcodes for the Darwin versions of tBL, tBLXi, and tBLXr, using pseudo-instructions to lower to the single final opcode. Update the ARM disassembler for this change.
llvm-svn: 135414
When splitting a live range immediately before an LDR_POST instruction
that redefines the address register, make sure to use the correct value
number in leaveIntvBefore.
We need the value number entering the instruction.
<rdar://problem/9793765>
llvm-svn: 135413
When trying to rematerialize a value before an instruction that has an
early-clobber redefine of the virtual register, make sure to look up the
correct value number.
Early-clobber defs are moved one slot back, so getBaseIndex is needed to
find the used value number.
Bugpoint was unable to reduce the test case for this, see PR10388.
llvm-svn: 135378
related bug fixes and corresponding assertions for uninitialized data
and missing NULL check. Test cases will be included with the new LFTR.
llvm-svn: 135333
1) Make non-legal 256-bit loads to be promoted to v4i64. This lets us
canonize the loads and handle things the same way we use to handle
for 128-bit registers. Despite of what one of the removed comments
explained, the load promotion would not mess with VPERM, it's only a
matter of doing the appropriate bitcasts when this instructions comes
to be introduced. Also make LOAD v8i32 legal.
2) Doing 1) exposed two bugs:
- v4i64 was being promoted to itself for several opcodes (introduced
in r124447 by David Greene) causing endless recursion and the stack to
explode.
- there was no support for allOnes BUILD_VECTORs and ANDNP would fail to
match because it was generating early target constant pools during
lowering.
3) The testcases are already checked-in, doing 1) exposed the
bugs in the current testcases.
4) Tidy up code to be more clear and explicit about AVX.
llvm-svn: 135313
This gets rid of some of the gory splitting details in RAGreedy and
makes them available to future SplitKit clients.
Slightly generalize the functionality to support multi-way splitting.
Specifically, SplitEditor::splitLiveThroughBlock() supports switching
between different register intervals in a block.
llvm-svn: 135307
is named after a common idiom (i.e., memset/memcpy). Otherwise, we can run into
infinite recursion. Ideally, the user should use the correct -fno-builtin flag,
but in case they don't we should play nicely.
rdar://9763412
llvm-svn: 135286
was really intended, and it may have been required prior to some of the
recent refactors. Including it however causes LLVMX86Desc to need
symbols from LLVMX86CodeGen, forming a dependency cycle. This was masked
in almost all builds: Clang, and GCC w/ optimizations didn't actually
emit the symbols!
llvm-svn: 135242
Owen Anderson