For Hexagon we want to be able to call functions during debugging, however currently lldb only supports this when there is JIT support.
Although emulation using IR interpretation is an alternative, it is currently limited in that it can't make function calls.
In this patch we have extended the IR interpreter so that it can execute a function call on the target using register manipulation.
To do this we need to handle the Call IR instruction, passing arguments to a new thread plan and collecting any return values to pass back into the IR interpreter.
The new thread plan is needed to call an alternative ABI interface of "ABI::PerpareTrivialCall()", allowing more detailed information about arguments and return values.
Reviewers: jingham, spyffe
Subscribers: emaste, lldb-commits, ted, ADodds, deepak2427
Differential Revision: http://reviews.llvm.org/D9404
llvm-svn: 242137
Summary:
r241964 has added a dependency on uuid.h, which (on linux at least) necessitates instalation of a
new package. Since the only thing we need from that file is uuid_t (and this is already defined
in UuidCompatibility.h), we can avoid this dependency by making this include __APPLE__ specific.
If in future, we need more from this library, we can revisit this decision.
Reviewers: jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11135
llvm-svn: 242022
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
Summary:
This commit moves the Windows DyanamicLoader to the common DynamicLoader
directory. This is required to remote debug Windows targets.
This commit also initializes the Windows DYLD plugin in
SystemInitializerCommon (similarly to both POSIX and MacOSX DYLD
plugins) so that we can automatically instantiate this class when
connected to a windows process.
Test Plan: Build.
Reviewers: zturner
Subscribers: lldb-commits, abdulras
Differential Revision: http://reviews.llvm.org/D10882
llvm-svn: 241697
* Add in-memory object file handling to the core dynamic loader
* Fix in memory object file handling in ObjectFileELF (previously
only part of the file was loaded before parsing)
* Fix load address setting in ObjectFileELF for 32-bit targets
when the load bias is negative
* Change hack in DYLDRendezvous.cpp to be more specific and not to
interfere with object files with fixed load address
Differential revision: http://reviews.llvm.org/D10800
llvm-svn: 241057
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
Summary:
Update DYLDRendezvous and SOEntry to use FileSpecs instead of storing paths as
strings, which caused incorrect comparison results due to denormalization.
Reviewers: clayborg, vharron, ovyalov
Reviewed By: ovyalov
Subscribers: jwolfe, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10267
llvm-svn: 239195
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
breakpoint only if the process it was for is still alive. We need to always remove this because
it has a pointer to the old loader, and if we ever hit it we will crash. I also put in a sanity
check in the callback function to make sure we don't invoke it if the process is wrong.
<rdar://problem/21006189>
llvm-svn: 237866
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
For PIE executables the type of the main executable is shared object
so we can't force that the main executable should have the type of
executable.
llvm-svn: 236870
Patch by Jaydeep Patil
Added MIPS32 and MIPS64 core revisions. This would be followed by register context and emulate-instruction for MIPS32.
DYLDRendezvous.cpp:
On Linux link map struct does not contain extra load offset field.
Reviewers: clayborg
Subscribers: bhushan, mohit.bhakkad, sagar, lldb-commits.
Differential Revision: http://reviews.llvm.org/D9190
llvm-svn: 235574
This includes following:
# Add a missing Process argument when calling GetSharedModule in DynamicLoaderDarwinKernel::KextImageInfo::LoadImageUsingMemoryModule
# Fix PlatformDarwinKernel::GetSharedModule prototype
llvm-svn: 233084
Summary:
Saw this while reading some code in DynamicLoader classes. Looks like this has
been a FIXME since 2011 at least.
Test Plan: Run unit tests.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8558
llvm-svn: 232983
Summary:
This has been discovered while experimenting with the gecko linker on android.
In general, assert()'ing on "user input" is a bad idea.
Test Plan: Run unit tests.
Reviewers: clayborg, tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8495
llvm-svn: 232966
* On Android (at least on platfrom-21 x86) the dynamic linker reports the
executable with its full path
* Use the platform path of the executable when storing it into the cache
(used to identify the SO entry for the executable) as this is the path
what will be reported by the dynamic linker. If the platform path isn't
set (local debugging) then it falls back to the normal file path.
Differential revision: http://reviews.llvm.org/D8296
llvm-svn: 232158
kernel debug session, instead of issuing a warning (which on one ever
sees), drop the user-specified kernel binary Module from the target and
try to discover the correct one dynamically.
<rdar://problem/19450329>
llvm-svn: 231885
This continues the effort to reduce header footprint and improve
build speed by removing clang and other unnecessary headers
from Target.h. In one case, some headers were included solely
for the purpose of declaring a nested class in Target, which was
not needed by anybody outside the class. In this case the
definition and implementation of the nested class were isolated
in the .cpp file so the header could be removed.
llvm-svn: 231107
This is part of a larger effort to reduce header file footprints.
Combined, these patches reduce the build time of LLDB locally by
over 30%. However, they touch many files and make many changes,
so will be submitted in small incremental pieces.
Reviewed By: Greg Clayton
Differential Revision: http://reviews.llvm.org/D8022
llvm-svn: 231097
Background: dyld binaries often have extra symbols in their symbol table like "malloc" and "free" for the early bringup of dyld and we often don't want to set breakpoints in dynamic linker binaries. We also don't want to call the "malloc" or "free" function in dyld when a user writes an expression like "(void *)malloc(123)" so we need to avoid doing name lookups in dyld. We mark Modules as being dynamic link editors and this helps do correct lookups for breakpoints by name and function lookups.
<rdar://problem/19716267>
llvm-svn: 228261
Summary:
The Android dynamic linker reports only the basename of each SO entry, so for
the above check to be successful, we need to compare it to the basename of the
main executable.
This also has a nasty side-effect when working with older version of
Android (verified on platform version 16), and debugging PIE
executables: the dynamic linker has a bug and reports the load address
of the main executable (which is a shared object, because PIE) to be 0.
We then try to update the list of loaded sections for all shared
objects, including the main executable, and set the load address to 0,
which breaks everything that relies on resolving addresses in the main
executable (breakpoints, stepping, etc). This commit also fixes that broken
behavior when debugging on older Androids. This bug doesn't happen on newer
Android versions (verified for Android L).
Test Plan: Run test suite on linux.
Reviewers: clayborg, tfiala, richard.mitton
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7188
llvm-svn: 228057
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
This change adds some logging around dynamic loader handling.
It also fixes an issue where the dynamic loader entry breakpoint can end
up being re-inserted, showing the wrong (i.e. software breakpoint) instruction
at the stop location when a backtrace is displayed at program startup.
I discussed with Jim Ingham a few weeks back. Essentially the
one-hit breakpoints need to make it back to public state handling before
the software breakpoint gets cleared. The flow I was hitting was that
the breakpoint would get set, it would get hit, it would get cleared to
step over, then it would get reapplied, when we never wanted it reapplied.
Stops at the beginning of execution would then show backtraces with
software breakpoint instructions in it, erroneously. This change fixes it.
There might be a more elegant way to do this, or a flow change somewhere else
to avoid, but it does fix an issue I experienced in startup breakpoint handling.
llvm-svn: 219371
that would clear the module list, and then put it back by hand. But we forgot to
also put its sections back in the target SectionList, so we would jettison it as
unloaded when we finished handling the first real load event. Add its sections.
<rdar://problem/18385947>
llvm-svn: 218156
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
Covers more of the behavior of rendezvous breakpoint handling and other
dynamic loader aspects, all on the 'enable log lldb dyld' log channel.
llvm-svn: 217283
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
Fixes include:
- Don't say that "<arch>-apple-ios" is compatible with "<arch>-apple-macosx"
- Fixed DynamicLoaderMacOSXDYLD so specify an architecture that was converted solely from a cputype and subtype, just specify the file + UUID.
- Fixed PlatformiOSSimulator::GetSupportedArchitectureAtIndex() so it returns the correct archs
- Fixed SymbolFileDWARFDebugMap to load .o files correctly by just specifying the architecture without the vendor and OS now that "<arch>-apple-ios" is not compatible with "<arch>-apple-macosx" so we can load .o files correctly for DWARF with debug map
- Fixed the coded in TargetList::CreateTarget() so it does the right thing with an underspecified triple where just the arch is specified.
llvm-svn: 212783
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
when it is reading the kext table, in case we're reading out of a core file with
corrupt contents in this region.
<rdar://problem/16601915>
llvm-svn: 206233
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
This was primarily working around problems where we weren't able
to identify trap handlers for different environments -- but instead,
I'm working to make it easier to specify those trap handler function
names.
llvm-svn: 201366
They were enforcing 16-byte alignment on stack frames for Darwin x86 programs.
But we've found that trap handlers typically don't have the stack pointer
aligned correctly when a trap happens and lldb wasn't backtracing all
the way through. This method is only used as a safety guard to prevent
lldb's unwinder from using a bogus address as a stack frame - we'll still
enforce word-size alignment on stack frames so that should be fine.
Also rolled back akaylor's changes from August 2013 in r188952 which changed
the i386 ABI plugin to relax the CallFrameAddressIsValid offsets for non-Darwin
targets where only 4-byte alignment is enforced. Now Darwin is the same as
those environments.
<rdar://problem/15982682>
llvm-svn: 201292
ObjectFile::SetLoadAddress (Target &target,
lldb::addr_t value,
bool value_is_offset);
Now "value" is a slide if "value_is_offset" is true, and "value" is an image base address otherwise. All previous usage of this API was using slides.
Updated the ObjectFileELF and ObjectFileMachO SetLoadAddress methods to do the right thing.
Also updated the ObjectFileMachO::SetLoadAddress() function to not load __LINKEDIT when it isn't needed and to only load sections that belong to the executable object file.
llvm-svn: 201003
Move some code that was in DynamicLoaderPOSIXDLYD into the
base class DynamicLoader. In the case of UpdateLoadedSections(),
the test to see whether a file is loadable (its address is zero)
is not generally applicable so that test is changed to a more
universally applicable check for the SHF_ALLOC flag on the section.
Also make it explicit that the reading of the module_id in
DynamicLoaderPOSIXDYLD::GetThreadLocalData() is using a hardcoded
size (of module_id) of 4, which might not be appropriate on
big-endian 64-bit systems, leaving a FIXME comment in place.
llvm-svn: 200939
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
symbols correctly. There were a couple of pieces to this.
1) When a breakpoint location finds itself pointing to an Indirect symbol, when the site for it is created
it needs to resolve the symbol and actually set the site at its target.
2) Not all breakpoints want to do this (i.e. a straight address breakpoint should always set itself on the
specified address, so somem machinery was needed to specify that.
3) I added some info to the break list output for indirect symbols so you could see what was happening.
Also I made it clear when we re-route through re-exported symbols.
4) I moved ResolveIndirectFunction from ProcessPosix to Process since it works the exact same way on Mac OS X
and the other posix systems. If we find a platform that doesn't do it this way, they can override the
call in Process.
5) Fixed one bug in RunThreadPlan, if you were trying to run a thread plan after a "running" event had
been broadcast, the event coalescing would cause you to miss the ThreadPlan running event. So I added
a way to override the coalescing.
6) Made DynamicLoaderMacOSXDYLD::GetStepThroughTrampolinePlan handle Indirect & Re-exported symbols.
<rdar://problem/15280639>
llvm-svn: 198976
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
Fixed the test case for "test/functionalities/exec/TestExec.py" on Darwin.
The issue was breakpoints were persisting and causing problems. When we exec, we need to clear out the process and target and start fresh with nothing and let the breakpoints populate themselves again. This patch correctly clears out the breakpoints and also flushes the process so that the objects (process/thread/frame) give out valid information.
llvm-svn: 194106
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that it
wasn't working out like I intended. Instead I'll try sticking with
the single StackFrame class -- there's too much code duplication to
make a more complicated class hierarchy sensible I think.
llvm-svn: 193983
defines a protocol that all subclasses will implement. StackFrame
is currently the only subclass and the methods that Frame vends are
nearly identical to StackFrame's old methods.
Update all callers to use Frame*/Frame& instead of pointers to
StackFrames.
This is almost entirely a mechanical change that touches a lot of
the code base so I'm committing it alone. No new functionality is
added with this patch, no new subclasses of Frame exist yet.
I'll probably need to tweak some of the separation, possibly moving
some of StackFrame's methods up in to Frame, but this is a good
starting point.
<rdar://problem/15314068>
llvm-svn: 193907
To make this work this patch extends LLDB to:
- Explicitly track the link_map address for each module. This is effectively the module handle, not sure why it wasn't already being stored off anywhere. As an extension later, it would be nice if someone were to add support for printing this as part of the modules list.
- Allow reading the per-thread data pointer via ptrace. I have added support for Linux here. I'll be happy to add support for FreeBSD once this is reviewed. OS X does not appear to have __thread variables, so maybe we don't need it there. Windows support should eventually be workable along the same lines.
- Make DWARF expressions track which module they originated from.
- Add support for the DW_OP_GNU_push_tls_address DWARF opcode, as generated by gcc and recent versions of clang. Earlier versions of clang (such as 3.2, which is default on Ubuntu right now) do not generate TLS debug info correctly so can not be supported here.
- Understand the format of the pthread DTV block. This is where it gets tricky. We have three basic options here:
1) Call "dlinfo" or "__tls_get_addr" on the inferior and ask it directly. However this won't work on core dumps, and generally speaking it's not a good idea for the debugger to call functions itself, as it has the potential to not work depending on the state of the target.
2) Use libthread_db. This is what GDB does. However this option requires having a version of libthread_db on the host cross-compiled for each potential target. This places a large burden on the user, and would make it very hard to cross-debug from Windows to Linux, for example. Trying to build a library intended exclusively for one OS on a different one is not pleasant. GDB sidesteps the problem and asks the user to figure it out.
3) Parse the DTV structure ourselves. On initial inspection this seems to be a bad option, as the DTV structure (the format used by the runtime to manage TLS data) is not in fact a kernel data structure, it is implemented entirely in useerland in libc. Therefore the layout of it's fields are version and OS dependent, and are not standardized.
However, it turns out not to be such a problem. All OSes use basically the same algorithm (a per-module lookup table) as detailed in Ulrich Drepper's TLS ELF ABI document, so we can easily write code to decode it ourselves. The only question therefore is the exact field layouts required. Happily, the implementors of libpthread expose the structure of the DTV via metadata exported as symbols from the .so itself, designed exactly for this kind of thing. So this patch simply reads that metadata in, and re-implements libthread_db's algorithm itself. We thereby get cross-platform TLS lookup without either requiring third-party libraries, while still being independent of the version of libpthread being used.
Test case included.
llvm-svn: 192922
Added a way to set hardware breakpoints from the "breakpoint set" command with the new "--hardware" option. Hardware breakpoints are not a request, they currently are a requirement. So when breakpoints are specified as hardware breakpoints, they might fail to be set when they are able to be resolved and should be used sparingly. This is currently hooked up for GDB remote debugging.
Linux and FreeBSD should quickly enable this feature if possible, or return an error for any breakpoints that are hardware breakpoint sites in the "virtual Error Process::EnableBreakpointSite (BreakpointSite *bp_site);" function.
llvm-svn: 192491
On at least FreeBSD and NetBSD there is an extra field in the dyld link
map struct. I've left an assert for other OSes (i.e., Linux/mips) until
it's determined if they do the same.
llvm-svn: 192358
1. existing breakpoints weren't being re-resolved after the sections of a library were loaded (ie. through dlopen).
2. loaded sections weren't being removed after a shared library had been unloaded.
llvm-svn: 190727
LLDB needs in memory module load level settings to control how much information is read from memory when loading in memory modules. This change adds a new setting:
(lldb) settings set target.memory-module-load-level [minimal|partial|complete]
minimal will load only sections (no symbols, or function bounds via function starts or EH frame)
partial will load sections + bounds
complete will load sections + bounds + symbols
llvm-svn: 188246
Usage: 'lldb a.out -c core'.
TODO: FreeBSD support.
TODO: Support for AVX registers.
TODO: Refactor so that RegisterContextCore* don't inherit from classes that use ProcessMonitor
to fix the build on OS/X.
llvm-svn: 186516
RegisterContextCoreLinux_x86_64 inherits from RegisterContextLinux_x86_64 which inherits from RegisterContext_x86_64 which uses has:
ProcessMonitor &GetMonitor();
This register context used by the core file can't use this since the process plug-in will be ProcessElfCore and the implementation of GetMonitor() does:
ProcessMonitor &
RegisterContext_x86_64::GetMonitor()
{
ProcessSP base = CalculateProcess();
ProcessPOSIX *process = static_cast<ProcessPOSIX*>(base.get());
return process->GetMonitor();
}
ProcessELFCore doesn't, nor should it inherit from ProcessPOSIX and any call to GetMonitor() will fail for ELF core files.
Suggested cleanups:
- Make a register context class that is a base class that doesn't have any reading smarts, then make one that uses ProcessPOSIX and the has the GetMonitor() call, and one that gets its data straight from the core file.
llvm-svn: 186223
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
llvm-svn: 186130
Oleksiy Vyalov