register set indicated by ARM_THREAD_STATE32 (value 9) instead of
the old ARM_THREAD_STATE (value 1); this patch changes lldb to
accept either register set flavor code.
<rdar://problem/24246257>
llvm-svn: 258289
This is a packet which allows the remote gdb stub to ask for the address
of a symbol in the process. lldb sends the packet (offering to provide
addresses for symbol names) after every solib loaded. I changed lldb so
that once the stub has indicated that it doesn't need any more symbol
addresses, lldb will stop sending the qSymbol:: packet on new solib loads.
This can yield a performance benefit over slower communication links when
there are many solibs involved.
<rdar://problem/23310049>
llvm-svn: 257569
Summary:
Allows the remote to enumerate the link map when adding and removing
shared libraries, so that lldb doesn't need to read it manually from
the remote's memory.
This provides very large speedups (on the order of 50%) in total
startup time when using the ds2 remote on android or Tizen devices.
Reviewers: ADodds, tberghammer, tfiala
Subscribers: tberghammer, sas, danalbert, llvm-commits, srhines
Differential Revision: http://reviews.llvm.org/D16004
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 257502
Summary:
The testcase TestNoreturnUnwind.py was failing
because the unwind from the vdso library was not
successful for clang compiler while it was passing
for gcc. It was passing for gcc since the unwind plan
used was the assembly plan and the ebp register was
set by the main function in case of gcc and was not
used by the functions in the call flow to the vdso, whereas
clang did not emit assembly prologue for main and so
the assembly unwind was failing. Normally in case of
failure of assembly unwind, lldb switches to EH CFI frame
based unwinding, but this was not happening for
the first frame. This patch tries to fix this behaviour by
falling to EH CFI frame based unwinding in case of assembly
unwind failure even for the first frame.
The test is still marked as XFAIL since it relys on the fix
of another bug.
Reviewers: lldb-commits, jingham, zturner, tberghammer, jasonmolenda
Subscribers: jasonmolenda
Differential Revision: http://reviews.llvm.org/D15046
llvm-svn: 257465
at each public stop to improve performance a bit. Most of the
information lldb needed was already in the jThreadsInfo response;
complete that information and catch a few cases where we could still
fall back to getting the information via discrete memory reads.
debugserver adds 'associated_with_dispatch_queue' and 'dispatch_queue_t
keys to the jThreadsInfo response for all the threads. lldb needs the
dispatch_queue_t value. And associated_with_dispatch_queue helps to
identify which threads definitively don't have any queue information so
lldb doesn't try to do memory reads to get that information just because
it was absent in the jThreadsInfo response.
Remove the queue information from the questionmark (T) packet. We'll
get the information for all threads via the jThreadsInfo response -
sending the information for the stopping thread (on all the private
stops, plus the less frequent public stop) was unnecessary information
being sent over the wire.
SystemRuntimeMacOSX will try to get information about queues by asking
the Threads for them, instead of reading memory.
ProcessGDBRemote changes to recognize the new keys being sent in the
jThreadsInfo response. Changes to ThreadGDBRemote to track the new
information. Also, when a thread is marked as definitively not
associated with a libdispatch queue, don't fall back to the system
runtime to try memory reads to find the queue name / kind / ID etc.
<rdar://problem/23309359>
llvm-svn: 257453
Summary:
Similar to rL256704 and rL256707, fix a few text files which were
accidentally checked in with DOS line endings, or mixed line endings.
Reviewers: jingham, emaste
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D16027
llvm-svn: 257361
Summary:
When we construct AppleObjCTrampolineHandler, if m_impl_fn_addr is
invalid, we call CanJIT(). If the gdb remote process does not support
allocating and deallocating memory, this call stack will include a call
to the AppleObjCRuntime constructor. The AppleObjCRuntime constructor
will then call the AppleObjCTrampolineHandler constructor, creating a
recursive call loop that eventually overflows the stack and segfaults.
Avoid this call loop by not constructing the AppleObjCTrampolineHandler
within AppleObjCRuntime until we actually need to use it.
Reviewers: clayborg, jingham
Subscribers: sas, lldb-commits
Differential Revision: http://reviews.llvm.org/D15978
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 257204
"qserial" to "qserialnum" because "qserial" looks a lot like the
queue type (either 'serial' or 'concurrent') and can be confusing
to read through. debugserver passes these up either in the questionmark
("T") packet, or in the response to the jThreadsInfo packet.
llvm-svn: 257121
Summary:
Some debug servers don't support it so there's no point in spamming
this.
Reviewers: clayborg
Subscribers: fjricci, lldb-commits
Differential Revision: http://reviews.llvm.org/D15972
llvm-svn: 257116
Summary:
For O32 abi register size should be 4 bytes.
For N32 and N64 abi register size should be 8 bytes.
This patch will make register read/write to set/get the size of register according to abi.
Reviewers: clayborg, tberghammer
Subscribers: lldb-commits, nitesh.jain, mohit.bhakkad, bhushan, jaydeep
Differential: http://reviews.llvm.org/D15884
llvm-svn: 256834
(There are changes in the copies of these four files in the FreeBSD base
system, and I've changed these ones to reduce gratuitous diffs in future
imports.)
llvm-svn: 256723
"thread-pcs" key is added to the T (questionmark) packet in
gdb-remote protocol so that lldb doesn't need to query the
pc values of every thread before it resumes a process.
The only odd part with this is that I'm sending the pc
values in big endian order, so we need to know the endianness
of the remote process before we can use them. All other
register values in gdb-remote protocol are sent in native-endian
format so this requirement doesn't exist. This addition is a
performance enhancement -- lldb will fall back to querying the
pc of each thread individually if it needs to -- so when
we don't have the byte order for the process yet, we don't
use these values. Practically speaking, the only way I've
been able to elicit this condition is for the first
T packet when we attach to a process.
<rdar://problem/21963031>
llvm-svn: 255942
This patch will fix the test case test_p_returns_correct_data_size_for_each_qRegisterInfo_attach_llgs_* of TestLldbGdbServer.py on mips. The test fails because we were sending RegisterInfo for msa registers to client even when msa registers are not available. With this commit server will send E45(end of resigters) response if msa registers are not available.
llvm-svn: 255108
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
* Add support for representing signed integers
* Add new constructors taking any signed or unsigned integer types
Differential revision: http://reviews.llvm.org/D15187
llvm-svn: 254715
Summary:
- Problem occurs when:
-- 32-bit inferiors run on x86_32 machine and
the architecture doesn't have AVX feature
-- This causes FPRType to be set to eFPRTypeFXSAVE
-- PTRACE_GETFPREGS was being used to read FXSAVE area
-- For 32-bit inferiors running on x86_32 machine,
PTRACE_GETFPREGS reads FSAVE area and not FXSAVE area
- Changed ptrace API to PTRACE_GETREGSET for 32-bit inferiors
-- This reads FPR data in FXSAVE format.
-- For 64-bit inferiors, no change has been made.
- Modified XFAIL for TestReturnValue.py
-- Earlier, this test was passing for Linux OS
-- Now, it passes for Android OS as well
Change-Id: Ieed72bc969b79516fc7b263b32493aa1e7a1a2ac
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ovyalov, jingham, lldb-commits, tberghammer, labath
Subscribers: jevinskie, labath, tberghammer, danalbert
Differential Revision: http://reviews.llvm.org/D15042
llvm-svn: 254499
This patch will clear bug 25194 - LLDB-Server Assertion raised when single stepping on MIPS. The problem was that while emulating instructions, old and new pc values would have garbage value in their upper 32 bits. Therefore checking if pc was changed (old_pc == new_pc) would always return false, because of which pc was not getting updated.
/* If we haven't changed the PC, change it here */
if (old_pc == new_pc)
{
new_pc += 4;
Context context;
return false;
}
Reviewers: tberghammer, clayborg
Subscribers: dsanders, lldb-commits, mohit.bhakkad, bhushan, jaydeep, nitesh.jain
Differential: http://reviews.llvm.org/D14633
llvm-svn: 254379
Summary:
This makes sure we do not attempt to send output over the gdb-remote protocol when the client is
not expecting it (i.e., after sending the stop-reply packet). Normally, this should not happen
(the process cannot generate output when it is stopped), but due to the fact that pty
communication is asynchronous in the linux kernel (llvm.org/pr25652), we may sometimes get this
output too late. Instead, we just hold the output, and send it next time we resume. This is not
ideal, but at least it makes sure we do not violate the remote protocol. Given that this happens
extremely rarely it's not worth trying to work around it with sleeps or something like that.
I also remove the m_stdio_communication_mutex, as all of LLGS is now single-threaded anyway.
Reviewers: tberghammer, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15019
llvm-svn: 254200
Summary:
- Reason of both bugs:
1. For the very first frame, Unwinder doesn't check the validity
of Full UnwindPlan before creating StackFrame from it:
When 'process launch' command is run after setting a breakpoint
in inferior, the Unwinder runs and saves only Frame 0 (the frame
in which breakpoint was set) in thread's StackFrameList i.e.
m_curr_frames_sp. However, it doesn't check the validity of the
Full UnwindPlan for this frame by unwinding 2 more frames further.
2. Unwinder doesn't update the CFA value of Cursor when Full UnwindPlan
fails and FallBack UnwindPlan succeeds in providing valid CFA values
for frames:
Sometimes during unwinding of stack frames, the Full UnwindPlan
inside the RegisterContextLLDB object may fail to provide valid
CFA values for these frames. Then the Fallback UnwindPlan is used
to unwind the frames.
If the Fallback UnwindPlan succeeds, then it provides a valid new
CFA value. The RegisterContextLLDB::m_cfa field of Cursor object
is updated during the Fallback UnwindPlan execution. However,
UnwindLLDB misses the implementation to update the 'cfa' field
of this Cursor with this valid new CFA value.
- This patch fixes both these issues.
- Remove XFAIL in test files corresponding to these 2 Bugs
Change-Id: I932ea407545ceee2d628f946ecc61a4806d4cc86
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: jingham, lldb-commits, jasonmolenda
Subscribers: lldb-commits, ovyalov, tberghammer
Differential Revision: http://reviews.llvm.org/D14226
llvm-svn: 253026
They get treated as special RLE encoding symbols and packets get
corrupted. Most other packet types already know about this apparently,
but QEnvironment missed these two.
Should fix PR25300.
llvm-svn: 252521
Summary:
Since this is within the lldb namespace, the compiler tries to
export a symbol for it. Unfortunately, since it is inlined, the
symbol is hidden and this results in a mess of warnings when
building on OS X with cmake.
Moving it to the lldb_private namespace eliminates that problem.
Reviewers: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D14417
llvm-svn: 252396
in places where we check for Triple::IOS. They're mostly the same as far
as lldb is conerned.
.
Also add a base cass implementation for Process::IsAlive - Greg added this
last year but it didn't get upstreamed.
llvm-svn: 252227
To do this I added a few new ways to determine the OS from PT_NOTE notes in the ELF file:
1 - Look for "LINUX" notes which indicate "linux" should be the OS
2 - Look through the "CORE" notes with NT_FILE as the type and sniff data from the paths listed in this section. On Ubuntu they contain "/lib/x86_64-linux-gnu" which has the triple and allows us to set "linux" as the OS in the architecture returned from ObjectFileELF::GetArchitecture().
Setting the OS correctly allows us to get the triple correct so we can extract registers without asserting and killing LLDB.
Also use the data from the NT_FILE to set the main executable if one isn't set in ProcessElfCore::DoLoadCore().
llvm-svn: 251537
Summary:
Gdb-remote's async thread sent out the eBroadcastBitRunPacketSent message *before* actually
sending out the continue packet. Since it's this message the actually triggers the public state
transition, it could happen (and it did happen in TestAttachResume, which does an "process
interrupt" right after a continue) that we attempt to stop the inferior before it was actually
started (which obviously did not end well). This fixes the problem by moving the broadcast after
the packet was actually sent.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14083
llvm-svn: 251399
This avoids the need to query the PC for private resume operations (public resumes have the PC
from the bigger jStopInfo packet) and speeds up the stepping on an android target by about 10%
(it some cases even more).
llvm-svn: 251301
This is just a trivial patch that corrects a couple of return value account to function's return type.
Also corrects typo in hardware breakpoint handler.
llvm-svn: 251269
Summary:
These changes aren't everything what is needed for the CMake target, but it's significantly approaching it.
These changes shouldn't effect the build process on other platforms.
Patch by Kamil Rytarowski, thanks!
Reviewers: joerg, brucem
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13711
llvm-svn: 251164
* Use PTRACE_GETVFPREGS/PTRACE_SETVFPREGS to access the floating point
registers instead of the old PTRACE_GETFPREGS/PTRACE_SETFPREGS. The
new call is available since armv5.
* Work around a kernel issue in PTRACE_POKEUSER with reading out the full
register set, modifying the neccessary value and then writing it back.
llvm-svn: 251111
This allows open source MacOSX clients to not have to build debugserver and the current LLDB can find debugserver inside the selected Xcode.app on your system.
<rdar://problem/23167253>
llvm-svn: 250735
This patch corrects the number of bytes of debug register resources which are written while installing or removing a breakpoint using ptrace interface on arm64 targets.
Differential revision: http://reviews.llvm.org/D12522
llvm-svn: 250700
For o32 applications on mips we were getting segmentation fault while launching lldb-server because of overwritting stack when using elf_gregset_t in DoWriteRegisterValue.
We are now using the GPR_mips_linux buffer in DoWriteRegisterValue as done in DoReadRegisterValue also, which solves the above issue.
llvm-svn: 250696
There were a number of const qualifiers being cast away which caused warnings.
This cluttered the output hiding real errors. Silence them by explicit casting.
NFC.
llvm-svn: 250662
disabled the use of the jThreadGetExtendedInfo packet which is used
to retrieve additional information about a thread, such as the QoS
setting for that thread on darwin systems.
Re-enable the use of the jThreadGetExtendedInfo packet, and add
some quick tests to the TestQueues mac test case which will verify
that we can retrieve the QoS names for these test threads.
<rdar://problem/22925096>
llvm-svn: 250364
Most platforms have "/dev/null". Windows has "nul". Instead of
hardcoding the string /dev/null at various places, make a constant
that contains the correct value depending on the platform, and use
that everywhere instead.
llvm-svn: 250331
Summary:
This commit adds support for binary memory reads ($x) to lldb-server. It also removes the "0x"
prefix from the $x client packet, to make it more compatible with the old $m packet. This allows
us to use almost the same code for handling both packet types. I have verified that debugserver
correctly handles $x packets even without the leading "0x". I have added a test which verifies
that the stub returns the same memory contents for both kinds of memory reads ($x and $m).
Reviewers: tberghammer, jasonmolenda
Subscribers: iancottrell, lldb-commits
Differential Revision: http://reviews.llvm.org/D13695
llvm-svn: 250295
set to true, but all plans run by RunThreadPlan need to have this set to false so they will
return control to RunThreadPlan without consulting plans higher on the stack.
Since this seems like a common error, I also modified RunThreadPlan to enforce this behavior.
<rdar://problem/22543166>
llvm-svn: 250084
Summary:
- Changed from 16 bits to 8 bits for Intel Architecture
-- FXSAVE structure now conforms with the layout of FXSAVE
area specified by IA Architecture Software Developer Manual
- Modified Linux and FreeBSD specific files to support this change
-- MacOSX already uses 8 bits for ftag register
- Modified TestRegisters.py and a.cpp:
-- Change allows 8 bit comparison of ftag values
-- Change resolves Bug 24733:
Removed XFAIL for Clang as the test works and passes for
Clang compiler as well
-- Change provides a Generic/Better way of testing Bug 24457
and Bug 25050 by using 'int3' inline assembly in inferior
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ovyalov, jingham, clayborg
Subscribers: tfiala, emaste
Differential Revision: http://reviews.llvm.org/D13587
llvm-svn: 250022
Summary:
EnablePluginLogging, GetPluginCommandHelp and ExecutePluginCommand aren't
implemented or used anywhere, so remove them from the Hexagon and POSIX
Dynamic Loaders as well as the FreeBSD process.
Reviewers: clayborg, labath, emaste
Subscribers: lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D13581
llvm-svn: 249840
when they introduced android testsuite regressions. Pavel has run the
testsuite against the updated patch and it completes cleanly now.
The original commit message:
Fixing a subtle issue on Mac OS X systems with dSYMs (possibly
introduced by r235737 but I didn't look into it too closely).
A dSYM can have a per-UUID plist in it which tells lldb where
to find an executable binary for the dSYM (DBGSymbolRichExecutable)
- other information can be included in this plist, like how to
remap the source file paths from their build pathnames to their
long-term storage pathnames.
This per-UUID plist is a unusual; it is used probably exclusively
inside apple with our build system. It is not created by default
in normal dSYMs.
The problem was like this:
1. lldb wants to find an executable, given only a UUID
(this happens when lldb is doing cross-host debugging
and doesn't have a copy of the target system's binaries)
2. It eventually calls LocateMacOSXFilesUsingDebugSymbols
which does a spotlight search for the dSYM on the local
system, and failing that, tries the DBGShellCommands
command to find the dSYM.
3. It gets a dSYM. It reads the per-UUID plist in the dSYM.
The dSYM has a DBGSymbolRichExecutable kv pair pointing to
the binary on a network filesystem.
4. Using the binary on the network filesystem, lldb now goes
to find the dSYM.
5. It starts by looking for a dSYM next to the binary it found.
6. lldb is now reading the dSYM over a network filesystem,
ignoring the one it found on its local filesystem earlier.
Everything still *works* but it's much slower.
This would be a tricky one to write up in a testsuite case;
you really need the binary to not exist on the local system.
And LocateMacOSXFilesUsingDebugSymbols will only compile on
Mac OS X - even if I found a way to write up a test case, it
would not run anywhere but on a mac.
One change Greg wanted while I was touching this code was to
have LocateMacOSXFilesUsingDebugSymbols (which could be asked
to find a binary OR find a dSYM) to instead return a ModuleSpec
with the sum total of everything it could find. This
change of passing around a ModuleSpec instead of a FileSpec
was percolated up into ModuleList::GetSharedModule.
The changes to LocateMacOSXFilesUsingDebugSymbols look larger
than they really are - there's a lot of simple whitespace changes
in there.
I ran the testsuites on mac, no new regressions introduced
<rdar://problem/21993813>
llvm-svn: 249755
* Use .ARM.exidx as a fallback unwind plan for non-call site when the
instruction emulation based unwind failed.
* Work around an old compiler issue where the compiler isn't sort the
entries in .ARM.exidx based on their address.
* Fix unwind info parsing when the virtual file address >= 0x80000000
* Fix bug in unwind info parsing when neither lr nor pc is explicitly
restored.
Differential revision: http://reviews.llvm.org/D13380
llvm-svn: 249119
GP registers for o32 applications were always giving zero value because SetType() on the RegisterValue was causing the accessor functions to pickup the value from m_scalar of RegisterValue which is zero.
In this patch byte size and byte order of register value is set at the time of setting the value of the register.
llvm-svn: 249020
introduced by r235737 but I didn't look into it too closely).
A dSYM can have a per-UUID plist in it which tells lldb where
to find an executable binary for the dSYM (DBGSymbolRichExecutable)
- other information can be included in this plist, like how to
remap the source file paths from their build pathnames to their
long-term storage pathnames.
This per-UUID plist is a unusual; it is used probably exclusively
inside apple with our build system. It is not created by default
in normal dSYMs.
The problem was like this:
1. lldb wants to find an executable, given only a UUID
(this happens when lldb is doing cross-host debugging
and doesn't have a copy of the target system's binaries)
2. It eventually calls LocateMacOSXFilesUsingDebugSymbols
which does a spotlight search for the dSYM on the local
system, and failing that, tries the DBGShellCommands
command to find the dSYM.
3. It gets a dSYM. It reads the per-UUID plist in the dSYM.
The dSYM has a DBGSymbolRichExecutable kv pair pointing to
the binary on a network filesystem.
4. Using the binary on the network filesystem, lldb now goes
to find the dSYM.
5. It starts by looking for a dSYM next to the binary it found.
6. lldb is now reading the dSYM over a network filesystem,
ignoring the one it found on its local filesystem earlier.
Everything still *works* but it's much slower.
This would be a tricky one to write up in a testsuite case;
you really need the binary to not exist on the local system.
And LocateMacOSXFilesUsingDebugSymbols will only compile on
Mac OS X - even if I found a way to write up a test case, it
would not run anywhere but on a mac.
One change Greg wanted while I was touching this code was to
have LocateMacOSXFilesUsingDebugSymbols (which could be asked
to find a binary OR find a dSYM) to instead return a ModuleSpec
with the sum total of everything it could find. This
change of passing around a ModuleSpec instead of a FileSpec
was percolated up into ModuleList::GetSharedModule.
The changes to LocateMacOSXFilesUsingDebugSymbols look larger
than they really are - there's a lot of simple whitespace changes
in there.
I ran the testsuites on mac, no new regressions introduced
<rdar://problem/21993813>
llvm-svn: 248985
.ARM.exidx/.ARM.extab sections contain unwind information used on ARM
architecture from unwinding from an exception.
Differential revision: http://reviews.llvm.org/D13245
llvm-svn: 248903
on iOS devices; fallout from Vince's cleanups made
in r237218 back in May. iOS native lldbs will call
StartDebugserverProcess() with a random port #
(see ProcessGDBRemote::LaunchAndConnectToDebugserver)
and neither side of this conditional expression should
be followed in that case.
I added an "if (in_port == 0) { ..." check around the
entire if/then/else and indented the block of code so
the diff looks larger than it really is.
<rdar://problem/21712643>
llvm-svn: 248343
If a breakpoint was hit in the inferior after shutdown had
started but before it was complete, it would cause an unclean
terminate of the inferior, leading to various problems the most
visible of which is that handles to the inferior executable would
remain locked, and the test suite would fail to run subsequent
tests because it could not recompile the inferior.
This fixes a major source of flakiness in the test suite.
llvm-svn: 247929
Character with ASCII code 0 is incorrectly treated by LLDB as the end of
RSP packet. The left of the debugger server output is silently ignored.
Patch from evgeny.leviant@gmail.com
Reviewed by: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12523
llvm-svn: 247908
The Go runtime schedules user level threads (goroutines) across real threads.
This adds an OS plugin to create memory threads for goroutines.
It supports the 1.4 and 1.5 go runtime.
Differential Revision: http://reviews.llvm.org/D5871
llvm-svn: 247852
The implications of this bug where that "log disable windows" would
not actually disable the log, and worse it would lock the file handle
making it impossible to delete the file until lldb was shut down.
This was then causing the test suite to fail, because the test suite
tries to delete log files in certain situations.
llvm-svn: 247841
SUMMARY:
Refer to http://lists.llvm.org/pipermail/lldb-dev/2015-August/008024.html for discussion
on this topic. Bare-iron target like YAMON gdb-stub does not support qProcessInfo, qC,
qfThreadInfo, Hg and Hc packets. Reply from ? packet is as simple as S05. There is no
packet which gives us process or threads information. In such cases, assume pid=tid=1.
Reviewers: clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D12876
llvm-svn: 247773
"gcc" register numbers are now correctly referred to as "ehframe"
register numbers. In almost all cases, ehframe and dwarf register
numbers are identical (the one exception is i386 darwin where ehframe
regnums were incorrect).
The old "gdb" register numbers, which I incorrectly thought were
stabs register numbers, are now referred to as "Process Plugin"
register numbers. This is the register numbering scheme that the
remote process controller stub (lldb-server, gdbserver, core file
support, kdp server, remote jtag devices, etc) uses to refer to the
registers. The process plugin register numbers may not be contiguous
- there are remote jtag devices that have gaps in their register
numbering schemes.
I removed all of the enums for "gdb" register numbers that we had
in lldb - these were meaningless - and I put LLDB_INVALID_REGNUM
in all of the register tables for the Process Plugin regnum slot.
This change is almost entirely mechnical; the one actual change in
here is to ProcessGDBRemote.cpp's ParseRegisters() which parses the
qXfer:features:read:target.xml response. As it parses register
definitions from the xml, it will assign sequential numbers as the
eRegisterKindLLDB numbers (the lldb register numberings must be
sequential, without any gaps) and if the xml file specifies register
numbers, those will be used as the eRegisterKindProcessPlugin
register numbers (and those may have gaps). A J-Link jtag device's
target.xml does contain a gap in register numbers, and it only
specifies the register numbers for the registers after that gap.
The device supports many different ARM boards and probably selects
different part of its register file as appropriate.
http://reviews.llvm.org/D12791
<rdar://problem/22623262>
llvm-svn: 247741
Summary:
Linux and FreeBSD occasionally send SI_KERNEL codes, nonexistent on other platforms.
Problem caught on NetBSD.
Reviewers: joerg, sas
Subscribers: sas, lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D12659
Change by Kamil Rytarowski <n54@gmx.com>
llvm-svn: 247579
RegisterContextPOSIX.h is poorly named and contains only the declaration
of POSIXBreakpointProtocol, which is used for in-process live kernel
debugging. It is now relevant only to FreeBSD.
In source/Plugins/Process/Utility/RegisterContext*.h (after assorted
rework and refactoring) it only served the purpose of #including other
necessary headers as a side-effect. Remove it from them and just include
the required headers directly.
Differential Revision: http://reviews.llvm.org/D12830
llvm-svn: 247558
Summary:
Realtime signals generally do not represent an error condition in an application but are more
like a regular means of IPC. As such, we shouldn't interrupt an application whenever it recieves
one. If any application will use these signals, it will probably use them a lot, rendering it's
debugging tiresome if we stopped at every signal. Furthermore, these signals are likely to be used
in a low level library, and the programmer may not even be aware of their presence.
For these reasons, I am switching the default disposition of realtime signals on all supported
platforms (i.e. Linux and Freebsd) to no-stop, no-notify. Any user still wishing to receive these
signals can always change the default to suit his needs.
Reviewers: ovyalov, emaste
Subscribers: lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D12795
llvm-svn: 247537
In some special case (e.g. signal handlers, hand written assembly) it is
valid to have 2 stack frame with the same CFA value. This CL change the
looping stack detection code to report a loop only if at least 3
consecutive frames have the same CFA.
Differential revision: http://reviews.llvm.org/D12699
llvm-svn: 247133
qXfer:features:read:target.xml packet, or via the
plugin.process.gdb-remote.target-definition-file setting, if the
register definition doesn't give us eh_frame or DWARF register
numbers for that register, try to get that information from the ABI
plugin.
The DWARF/eh_frame register numbers are defined in the ABI
standardization documents - so getting this from the ABI plugin is
reasonable. There's little value in having the remote stub inform
us of this generic information, as long as we can all agree on the
names of the registers.
There's some additional information we could get from the ABI. For
instance, on ABIs where function arguments are passed in registers,
lldb defines alternate names like "arg1", "arg2", "arg3" for these
registers so they can be referred to that way by the user. We could
get this from the ABI if the remote stub doesn't provide that. That
may be something worth doing in the future - but for now, I'm keeping
this a little more minimal.
Thinking about this, what we want/need from the remote stub at a
minimum are:
1. The names of the register
2. The number that the stub will use to refer to the register with
the p/P packets and in the ? response packets (T/S) where
expedited register values are provided
3. The size of the register in bytes
(nice to have, to remove any doubt)
4. The offset of the register in the g/G packet if we're going to
use that for reading/writing registers.
debugserver traditionally provides a lot more information in
addition to this via the qRegisterInfo packet, and debugserver
augments its response to the qXfer:features:read:target.xml
query to include this information. Including:
DWARF regnum, eh_frame regnum, stabs regnum, encoding (ieee754,
Uint, Vector, Sint), format (hex, unsigned, pointer, vectorof*,
float), registers that should be marked as invalid if this
register is modified, and registers that contain this register.
We might want to get all of this from the ABI - I'm not convinced
that it makes sense for the remote stub to provide any of these
details, as long as the ABI and remote stub can agree on register
names.
Anyway, start with eh_frame and DWARF coming from the ABI if
they're not provided by the remote stub. We can look at doing
more in the future.
<rdar://problem/22566585>
llvm-svn: 247121
When lldb receives a gdb-remote protocol packet that has
nonprintable characters, it will print the packet in
gdb-remote logging with binary-hex encoding so we don't
dump random 8-bit characters into the packet log.
I'm changing this check to allow whitespace characters
(newlines, linefeeds, tabs) to be printed if those are
the only non-printable characters in the packet.
This is primarily to get the response to the
qXfer:features:read:target.xml packet to show up in the
packet logs in human readable form. Right now we just
get a dozen kilobytes of hex-ascii and it's hard to
figure out what register number scheme is being used.
llvm-svn: 247120
Summary:
- For 'register read --all' command on x86_64-Linux Platform:
-- Provide correct values of X87 FPU Special Purpose Registers
-- Both 32-bit & 64-bit inferiors give correct values on this
Platform
- Added a Test Vector:
-- To verify the expected behaviour of the command
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ashok.thirumurthi, granata.enrico, tfiala, clayborg
Differential Revision: http://reviews.llvm.org/D12592
llvm-svn: 246955
Summary:
There was a race condition in the AsyncThread, where we would end up sending a vAttach
notification to the thread before it got a chance set up its listener (this can be reproduced by
adding a sleep() at the very beginning of ProcessGDBRemote::AsyncThread()). This event would then
get lost and we LLDB would deadlock. I fix this by setting up the listener early on, in the
ProcessGDBRemote constructor.
This should improve the stability of all attach tests. For now, I am removing XTIMEOUT from
TestAttachResume, and will watch the buildbots for signs of trouble.
Reviewers: clayborg, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12552
llvm-svn: 246756
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
When detaching, we need to detach from all threads of the inferior and not just the main one.
Without this, a multi-threaded inferior would usually crash once the server exits.
llvm-svn: 246549
Linux sometimes sends us a PTRACE_EVENT_EXIT when an inferior process gets a SIGKILL. This can be
confusing, since normally we don't expect any events when the inferior is stopped. This commit
adds code to handle this situation (resume the thread and let it exit normally) and avoid an
assertion failure in ResumeThread().
llvm-svn: 246539
code that looks for a second stop-reply packet in response to an
interrupt (control-c). This is to handle the case where where a
stop packet is making its way up to lldb right as lldb decides to
interrupt the inferior. If the inferior is running and we interrupt
it, we'd expect a T11 type response meaning that the inferior halted
because of the interrupt. But if the interrupt gets a T05 type
response instead, meaning that we stopped execution by hitting a
breakpoint or whatever, then the interrupt was received while the
inferior was already paused and so it is treated as a "?" packet
-- the remote stub will send the stop message a second time.
There's a timeout where we wait to get this second stop reply packet
in SendContinuePacketAndWaitForResponse, currently 1ms. For a slow
remote target, it may take longer than that to send the second stop
reply packet. If that happens, then lldb will use that second stop
reply packet as the response for the next packet request it makes
to the remote stub. The two will be out of sync by one packet for
the rest of the debug session and it's going to go badly from then on.
I've seen times as slow as 46ms, and given the severity of missing that
second stop reply packet, I'm increasing the timeout to 100ms, or 0.1sec.
<rdar://problem/21990791>
llvm-svn: 246004
http://reviews.llvm.org/D9703
This updated patches correct problems in arm hardware watchpoint support patch posted earlier.
This patch has been tested on samsung chromebook (ARM - Linux) and PandaBoard using basic watchpoint test application.
Also it was tested on Nexus 7 Android device.
On chromebook linux we are able to set and clear all types of watchpoints but on android we end up getting a watchpoint packet error because we are not able to call hardware watchpoint ptrace functions successfully.
llvm-svn: 245961
Setting and getting register values as bytes instead of depending on the 128 bit integer support in register value.
This patch will fix the build failure in the release branch.
Reviewers: tberghammer, clayborg, hans
Subscribers: bhushan, nitesh.jain, jaydeep, lldb-commits
Differential: http://reviews.llvm.org/D12275
llvm-svn: 245927
Summary:
Most NPL private functions took (shared) pointers to threads as arguments. This meant that the
callee could not be sure if the pointer was valid and so most functions were peppered with
null-checks. Now, I move the check closer to the source, and pass around the threads as
references (which are then assumed to be valid).
Reviewers: tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12237
llvm-svn: 245831
Summary:
When a windows remote stops because of a DLL load/unload, the debug server
sends a stop reply packet that contains a `library` key with any value (usually
just `library:1`). This indicates to the debugger that a library has been
loaded or unloaded and that the list of libraries should be refreshed (usually
with `qXfer:libraries:read`).
This change just triggers a call to `LoadModules()` which in turns will send a
remote library read command when a stop reply that requests it is received.
Reviewers: clayborg, zturner, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12218
llvm-svn: 245708
Summary:
NPL used to be peppered with casts of the NativeThreadProtocol objects into NativeThreadLinux. I
move these closer to the source where we obtain these objects. This way, the rest of the code can
assume we are working with the correct type of objects.
Reviewers: ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12187
llvm-svn: 245681
This was breaking disassembly for arm machines that we force to be
thumb mode all the time because we were only checking for llvm::Triple::arm.
i.e.
armv6m (ARM Cortex-M0)
armv7m (ARM Cortex-M3)
armv7em (ARM Cortex-M4)
<rdar://problem/22334522>
llvm-svn: 245645
There might be an underlying race condition here that should be
figured out, but this at least prevents the crash for the time
being and doesn't appear to have any adverse effects.
llvm-svn: 245626
Summary:
This is useful when dealing with Windows remote that use only the
qXfer:libraries command which returns absolute base addresses, as
opposed to qXfer:libraries-svr4 which returns relative offsets for
module bases.
Reviewers: clayborg, zturner, ADodds
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12204
llvm-svn: 245625
Summary: Size specifier should come after `%` not before.
Reviewers: clayborg, ADodds
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12203
llvm-svn: 245608
Summary:
There was a bug in NativeProcessLinux, where doing an instruction-level single-step over the
thread-creation syscall resulted in loss of control over the inferior. This happened because
after the inferior entered the thread-creation maintenance stop, we unconditionally performed a
PTRACE_CONT, even though the original intention was to do a PTRACE_SINGLESTEP. This is fixed by
storing the original state of the thread before the stop (stepping or running) and then
performing the appropriate action when resuming.
I also get rid of the callback in the ThreadContext structure, which stored the lambda used to
resume the thread, but which was not used consistently.
A test verifying the correctness of the new behavior is included.
Reviewers: ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12104
llvm-svn: 245545
to the user. e.g. specified via the
plugin.process.gdb-remote.target-definition-file
setting. Currently we silently ignore the target definition if
there is a parse error.
llvm-svn: 245536
Summary:
Due to fork()/execve(), the launched inferior inherits the signal mask of its parent (lldb-server). But because lldb-server modifies its signal mask (It blocks SIGCHLD, for example), the inferior starts with some signals being initially blocked.
One consequence is that TestCallThatRestarts.ExprCommandThatRestartsTestCase (test/expression_command/call-restarts) fails because sigchld_handler() in lotta-signals.c is not called, due to the SIGCHLD signal being blocked.
To prevent the signal masking done by lldb-server from affecting the created inferior, the signal mask of the inferior is now cleared before the execve().
Patch by: Yacine Belkadi
Reviewers: ovyalov, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12138
llvm-svn: 245436
Summary:
in case we are logging to stdout, any log lines from the forked child can be misconstrued to be
inferior output. To avoid this, we disable all logging immediately after forking.
I also fix the implementatoion of DisableAllLogChannels, which was a no-op before this commit.
Reviewers: clayborg, ovyalov
Subscribers: dean, lldb-commits
Differential Revision: http://reviews.llvm.org/D12083
llvm-svn: 245272
This patch :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
Reviewers: jaydeep, clayborg, jasonmolenda, ovyalov, emaste
Subscribers: tberghammer, ovyalov, emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential: http://reviews.llvm.org/D10919
llvm-svn: 245217
numbers in the key name "ehframe" or "eh_frame" in addition to the deprecated
"gcc" name (e.g. from a plugin.process.gdb-remote.target-definition-file
python file).
llvm-svn: 245151
for eh_frame and stabs register numberings. This is not
complete but it's a step in the right direction. It's almost
entirely mechanical.
lldb informally uses "gcc register numbering" to mean eh_frame.
Why? Probably because there's a notorious bug with gcc on i386
darwin where the register numbers in eh_frame were incorrect.
In all other cases, eh_frame register numbering is identical to
dwarf.
lldb informally uses "gdb register numbering" to mean stabs.
There are no official definitions of stabs register numbers
for different architectures, so the implementations of gdb
and gcc are the de facto reference source.
There were some incorrect uses of these register number types
in lldb already. I fixed the ones that I saw as I made
this change.
This commit changes all references to "gcc" and "gdb" register
numbers in lldb to "eh_frame" and "stabs" to make it clear
what is actually being represented.
lldb cannot parse the stabs debug format, and given that no
one is using stabs any more, it is unlikely that it ever will.
A more comprehensive cleanup would remove the stabs register
numbers altogether - it's unnecessary cruft / complication to
all of our register structures.
In ProcessGDBRemote, when we get register definitions from
the gdb-remote stub, we expect to see "gcc:" (qRegisterInfo)
or "gcc_regnum" (qXfer:features:read: packet to get xml payload).
This patch changes ProcessGDBRemote to also accept "ehframe:"
and "ehframe_regnum" from these remotes.
I did not change GDBRemoteCommunicationServerLLGS or debugserver
to send these new packets. I don't know what kind of interoperability
constraints we might be working under. At some point in the future
we should transition to using the more descriptive names.
Throughout lldb we're still using enum names like "gcc_r0" and "gdb_r0",
for eh_frame and stabs register numberings. These should be cleaned
up eventually too.
The sources link cleanly on macosx native with xcode build. I
don't think we'll see problems on other platforms but please let
me know if I broke anyone.
llvm-svn: 245141
Summary:
For Linux x86 based environments the orig_eax/orig_rax
register should be set to -1 to prevent the instruction pointer
to be decremented, which was the cause for the SIGILL exception.
Fix for Bug 23659
Reviewers: zturner, ashok.thirumurthi, mikesart, jingham, clayborg
Subscribers: clayborg, labath
Differential Revision: http://reviews.llvm.org/D11411
llvm-svn: 244875
SUMMARY:
The patch uses qfThreadID to get the thread IDs if qC packet is not supported by target.
Reviewers: jingham, clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D11519
llvm-svn: 244866
SUMMARY:
The patch supports TAAwatch:addr packet. The patch also sets m_watchpoints_trigger_after_instruction
to eLazyBoolNo when qHostInfo or qWatchpointSupportInfo is not supported by the target.
Reviewers: jingham, clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D11747
llvm-svn: 244865
SUMMARY:
Last 3bits of the watchpoint address are masked by the kernel. For example, n is
at 0x120010d00 and m is 0x120010d04. When a watchpoint is set at m, then watch
exception is generated even when n is read/written. To handle this case, instruction
at PC is emulated to find the base address of the load/store instruction. This address
is then appended to the description of the stop-info packet. Client then reads this
information to check whether the user has set a watchpoint on this address.
Reviewers: jingham, clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D11672
llvm-svn: 244864
On x86/x86_64 read only watchpoints aren't supported. Fall back
to read/write watchpoints in that case.
Note: Logic should be added to ignore the watchpoint hit when
occurred because of a write.
llvm-svn: 244742
This is more preparation for multiple different kinds of types from different compilers (clang, Pascal, Go, RenderScript, Swift, etc).
llvm-svn: 244689
The issue was we were sending a "qSymbol::" packet and it we were already disconnected were weren't exiting the while loop if we didn't successfully send the qSymbol packet.
<rdar://problem/22098746>
llvm-svn: 244683
This change :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
- Eliminates ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and uses llvm::APInt and llvm::APFloat for all integer and floating point types.
Reviewers : emaste, jaydeep, clayborg
Subscribers : emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential : http://reviews.llvm.org/D10919
llvm-svn: 244308
working with (the Communication m_bytes ivar) contained a single packet.
Instead, it may contain multitudes. Find the boundaries of the first packet
in the buffer and replace that with the decompressed version leaving the
rest of the buffer unmodified.
<rdar://problem/21841377>
llvm-svn: 243846
On FreeBSD the tid is (somewhat unintuitively) found in the pr_pid
field of the NT_PRSTATUS note. Collect it when parsing the note and
store it in the thread data.
For Linux I've left the original behaviour of using sequential TIDs
(0, 1, 2...) as I don't yet have code to obtain it.
Differential Revision: http://reviews.llvm.org/D11652
llvm-svn: 243748
Previously embedded interpreters were handled as ad-hoc source
files compiled into source/Interpreter. This made it hard to
disable a specific interpreter, or to add support for other
interpreters and allow the developer to choose which interpreter(s)
were enabled for a particular build.
This patch converts script interpreters over to a plugin-based system.
Script interpreters now live in source/Plugins/ScriptInterpreter, and
the canonical LLDB interpreter, ScriptInterpreterPython, is moved there
as well.
Any new code interfacing with the Python C API must live in this location
from here on out. Additionally, generic code should never need to
reference or make assumptions about the presence of a specific interpreter
going forward.
Differential Revision: http://reviews.llvm.org/D11431
Reviewed By: Greg Clayton
llvm-svn: 243681
Summary:
If we used unnamed pipes instead of named pipes, we can avoid having the
file system littered with debugserver-named-pipes if lldb-server happens to
crash for whatever reason. Also, on some buggy systems, it's possible to be
able to create but not to delete a fifo. Ideally, support for unnamed pipes
should be added to debugserver as well, so we can avoid the `#ifdef` here.
Reviewers: clayborg, vharron, chying
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11609
llvm-svn: 243667
Summary:
This commit moves the m_spawned_pids member from the common LLGS/Platform class to the plaform
specific part. This enables us to remove LLGS code, which was attempting to manage the
m_spawned_pids contents, but at the same time making sure, there is only one debugged process. If
we ever want to do multi-process debugging, we will probably want to replace this with a set of
NativeProcessProtocolSP anyway. The only functional change is that support for
qKillSpawnedProcess packet is removed from LLGS, but this was not used there anyway (we have the
k packet for that).
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11557
llvm-svn: 243513
system, make a couple of additional checks to see if the
attach was denied via the System Integrity Protection that
is new in Mac OS X 10.11. If so, return a special E87
error code to indicate this to lldb.
Up in lldb, if we receive the E87 error code, be specific
about why the attach failed.
Also detect the more common case of general attach failure
and print a better error message than "lost connection".
I believe this code will all build on Mac OS X 10.10 systems.
It may not compile or run on earlier versions of the OS.
None of this should build on other non-darwin systems.
llvm-svn: 243511
The removal of in-process Linux debug support left a switch statement
with llvm::Triple::FreeBSD as the only case. Simplify by replacing it
with a now-equivalent assertion.
llvm-svn: 243468
As of r240543 ProcessPOSIX and POSIXThread are used only on FreeBSD, so
just roll them into ProcessFreeBSD and FreeBSDThread.
Differential Revision: http://reviews.llvm.org/D10698
llvm-svn: 243427
Summary:
Handle_k was printing an error when killing a process because KillSpawnedProcess was expecting to
be asynchronously notified of the process death, which no longer works, since we don't wait for
the process on a separate thread. However, the whole usage of KillSpawnedProcess is dubious here,
since it tries to be nice and terminate the process first with SIGTERM, which will not have the
intended effect on a ptraced process. I replace this code with a call to
NativeProcessProtocol::Kill, which does not suffer from these problems.
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11520
llvm-svn: 243397
SUMMARY:
This patch fixes couple of issues:
1. A thread tries to lock a mutex which is already locked.
2. Updating a thread list before the stop packet is parsed so that it can get a valid thread id and allows to set the stop info correctly.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, jaydeep, lldb-commits
Differential Revision: http://reviews.llvm.org/D11449
llvm-svn: 243091
Summary:
This replaces (void)x; usages where they x was subsequently
involved in an assertion with this macro to make the
intent more clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11451
llvm-svn: 243074
Summary:
GetLoadedModuleFileSpec was reading /proc/pid/maps character by character, which was very slow,
since we do that for every shared library, which android tends to have a lot. Switching to
ProcFileReader saves us about 0.4 seconds in attach time.
Reviewers: tberghammer
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: http://reviews.llvm.org/D11460
llvm-svn: 243019
Summary:
This adds support for jstopinfo field of stop-reply packets. This field enables us to avoid
querying full thread stop data on most stops (see r242593 for more details).
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11415
llvm-svn: 242997
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
This is a resubmission of r242305 after it was reverted due to bad interactions with the stdio
thread.
llvm-svn: 242783
Summary:
This commit removes the stdio forwarding thread in lldb-server in favor of a MainLoop callback.
As in some situations we need to forcibly flush the stream ( => Read() is called from multiple
places) and we still have multiple threads, I have had to additionally protect the communication
instance with a mutex.
Reviewers: ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11296
llvm-svn: 242782
Make sure we dont treat EINTR as a fatal error. I was getting this when trying to profile the
debugger. I'm not sure why this wasn't surfacing before, it could be that the profiler is using
some signals internally.
llvm-svn: 242681
Changed the "jthreads" key/value in the stop reply packets to be "jstopinfo". This JSON only contains threads with valid stop reasons and allows us not to have to ask about other threads via qThreadStopInfo when we are stepping. The "jstopinfo" only gets sent if there are more than one thread since the stop reply packet contains all the info needed for a single thread.
Added a Process::WillPublicStop() in case process subclasses want to do any extra gathering for public stops. For ProcessGDBRemote, we end up sending a jThreadsInfo packet to gather all expedited registers, expedited memory and MacOSX queue information. We only do this for public stops to minimize the packets we send when we have multiple private stops. Multiple private stops happen when a source level single step, step into or step out run the process multiple times while implementing the stepping, and none of these private stops make it out to the UI via notifications because they are private stops.
llvm-svn: 242593
Summary:
It seems that reading of register data is the biggest bottleneck in LLGS at the moment. Sending
four registers instead of the full GPR set increases the jThreadsInfo processing time about
6-fold. Until we figure out where is this time going, this commit limits the amount of data we
send to provide a more fluid debugging experience.
Reviewers: tberghammer, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11264
llvm-svn: 242517
Summary:
This commit adds initial support for the jThreadsInfo packet to lldb-server. The current
implementation does not expedite inferior memory. I have also added a description of the new
packet to our protocol documentation (mostly taken from Greg's earlier commit message).
Reviewers: clayborg, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11187
llvm-svn: 242402
Greg Clayton