This is a resubmit of r254403, see that commit's message for context. This fixes an issue in the
original commit, where we would incorrectly interrupt the process if the interrupt request came
just as we were about to send the stopped event to the public.
llvm-svn: 254902
On android the symbols exposed by libdl (dlopen, dlclose, dlerror)
prefixed by "__dl_". This change moves the handling of process
load/unload to the platform object and override it for android to
handle the special prefix.
Differential revision: http://reviews.llvm.org/D11465
llvm-svn: 254504
Summary:
The following situation was occuring in TestAttachResume:
- we did a "continue" from a breakpoint (which involves a private start-stop to step over the
breakpoint)
- after receiving the stop-reply from the step-over, we issue a "detach" (which requires a
process interrupt)
- at this moment, the public state is "running", private state is "about-to-be-stopped" (the
stopped event was broadcast, but it was not received yet)
- StopForDestroyOrDetach (public thread) notes the public state is running, sends an interrupt
request to the private thread
- private thread gets the eBroadcastBitInterrupt (before the eStateStopped message), and asks the
process plugin to stop (via Halt())
- process plugin says it has nothing to do as the process is already stopped
- private thread shrugs and carries on. receives the stop event, restores the breakpoint and
resumes the process.
- after a while, the public thread times out and says it failed to stop the process
This patch does the following:
- splits Halt() into two functions, private and public, their usage depends on the context
- public Halt(): sends eBroadcastBitInterrupt to the private thread and waits for the Stop
event
- HaltPrivate(): asks the plugin to stop and makes a note that the halt was requested. When the
next stop event comes it sets the interrupt flag on it.
- removes HijackPrivateProcessEvents(), as the only user (old Halt()) has gone away
- removes the m_currently_handling_event hack, as the new Halt() does not need it
- adds a use_run_lock parameter to public Halt() and WaitForProcessToStop(). This was needed
because RunThreadPlan uses Halt() while holding the run lock and we don't want Halt() to take
it away from him.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14989
llvm-svn: 254403
in places where we check for Triple::IOS. They're mostly the same as far
as lldb is conerned.
.
Also add a base cass implementation for Process::IsAlive - Greg added this
last year but it didn't get upstreamed.
llvm-svn: 252227
Summary:
The code which was preventing the usage of the OS plugin while detach is in
progress also prevented us to update the thread list correctly. This resulted
in an empty thread list, which confused the detaching logic. Change the
condition do only do what it says (disable the usage of the OS plugin).
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14201
llvm-svn: 251932
Summary:
ADB packets have a maximum size of 4k. This means the size of memory reads does not affect speed
too much (as long as it fits in one packet). Therefore, I am increasing the default memory read
size for android to 2k. This value is used only if the user has not modified the default
memory-cache-line-size setting.
Reviewers: clayborg, tberghammer
Subscribers: tberghammer, danalbert, srhines, lldb-commits
Differential Revision: http://reviews.llvm.org/D13812
llvm-svn: 250814
Most platforms have "/dev/null". Windows has "nul". Instead of
hardcoding the string /dev/null at various places, make a constant
that contains the correct value depending on the platform, and use
that everywhere instead.
llvm-svn: 250331
* ArchSpec::MergeFrom() would erroneously promote an unspecified
unknown to a specified unknown when both the ArchSpec and the merged
in ArchSpec were both unspecified unknowns. This no longer happens,
which fixes issues with global module cache lookup in some
situations.
* Added ArchSpec::DumpTriple(Stream&) that now properly prints
unspecified unknowns as '*' and specified unknows as 'unknown'.
This makes it trivial to tell the difference between the two.
Converted printing code over ot using DumpTriple() rather than
building from scratch.
* Fixed up a couple places that were not guaranteeing that an
unspecified unknown was recorded as such.
llvm-svn: 250253
set to true, but all plans run by RunThreadPlan need to have this set to false so they will
return control to RunThreadPlan without consulting plans higher on the stack.
Since this seems like a common error, I also modified RunThreadPlan to enforce this behavior.
<rdar://problem/22543166>
llvm-svn: 250084
Summary:
The following situation occured in TestAttachResume:
The inferior was stoped at a breakpoint and we did a continue, immediately followed by a detach.
Since there was a trap instruction under the IP, the continue did a step-over-breakpoint before
resuming the inferior for real. In some cases, the detach command was executed between these two
events (after the step-over stop, but before continue). Here, public state was running, but
private state was stopped. This caused a problem because HaltForDestroyOrDetach was checking the
public state to see whether it needs to stop the process (call Halt()), but Halt() was checking
the private state and concluded that there is nothing for it to do.
Solution: Instead of Halt() call SendAsyncInterrupt(), which will then cause Halt() to be
executed in the context of the private state thread. I also rename HaltForDestroyOrDetach to
reflect it does not call halt directly.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13056
llvm-svn: 248371
The Go runtime schedules user level threads (goroutines) across real threads.
This adds an OS plugin to create memory threads for goroutines.
It supports the 1.4 and 1.5 go runtime.
Differential Revision: http://reviews.llvm.org/D5871
llvm-svn: 247852
Before we had:
ClangFunction
ClangUtilityFunction
ClangUserExpression
and code all over in lldb that explicitly made Clang-based expressions. This patch adds an Expression
base class, and three pure virtual implementations for the Expression kinds:
FunctionCaller
UtilityFunction
UserExpression
You can request one of these expression types from the Target using the Get<ExpressionType>ForLanguage.
The Target will then consult all the registered TypeSystem plugins, and if the type system that matches
the language can make an expression of that kind, it will do so and return it.
Because all of the real expression types need to communicate with their ExpressionParser in a uniform way,
I also added a ExpressionTypeSystemHelper class that expressions generically can vend, and a ClangExpressionHelper
that encapsulates the operations that the ClangExpressionParser needs to perform on the ClangExpression types.
Then each of the Clang* expression kinds constructs the appropriate helper to do what it needs.
The patch also fixes a wart in the UtilityFunction that to use it you had to create a parallel FunctionCaller
to actually call the function made by the UtilityFunction. Now the UtilityFunction can be asked to vend a
FunctionCaller that will run its function. This cleaned up a lot of boiler plate code using UtilityFunctions.
Note, in this patch all the expression types explicitly depend on the LLVM JIT and IR, and all the common
JIT running code is in the FunctionCaller etc base classes. At some point we could also abstract that dependency
but I don't see us adding another back end in the near term, so I'll leave that exercise till it is actually necessary.
llvm-svn: 247720
Summary:
There was a race condition in Process class, where we would not wait for process stdout to
propagate fully before we would shut down the connection (repro case: slow down the stdio thread
by placing a sleep right at the end of the while loop in Communication::ReadThread). The Process
class already tried to solve this problem by synchronizing with the read thread in
Process::ShouldBroadcastEvent, but unfortunately the connection got closed before that in
Process::SetExitStatus. I solve this issue by delaying the connection shutdown until we get a
chance to process the event and synchronize. Alternatively, I could have moved the
synchronization point to an earlier point in SetExitStatus, but it seems safer to delay the
shutdown until other things get a chance to notice the process has exited.
Reviewers: clayborg, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12558
llvm-svn: 246753
contained within Process so that we won't be duplicating the warning
message if other parts of the code want to issue the message. Change
Process::PrintWarning to be a protected method - the public method
will be the PrintWarningOptimization et al. Also, Have
Thread::FunctionOptimizationWarning shortcut out if the warnings
have been disabled so that we don't (potentially) compute parts of
the SymbolContext unnecessarily.
llvm-svn: 244436
The first part was in r243508 -- the extent of the UI changes in that
patchset was to add "[opt]" to the frame-format when a stack frame was
built with optimized code.
In this change, when a stack frame built with optimization is selected,
a message will be printed to the async output channel --
opt1.c was compiled with optimization - stepping may behave oddly; variables may not be available.
The warning will be only be printed once per source file in a debug session.
These warnings may be disabled by
settings set target.process.optimization-warnings false
Internally, a new Process::PrintWarning() method has been added for
warnings that we want to print only once to the user. It takes a type
of warning (currently only eWarningsOptimization) and an object
pointer (CompileUnit*) - the warning will only be printed once for a
given object pointer value.
This is a bit of a prototype of this change - I think we will be
tweaking it more in the future. But I wanted to land this and see
how it goes. Advanced users will find these warnings unnecessary
noise and will quickly disable them - but anyone who maintains a
debugger knows that debugging optimized code, without realizing it,
is a constant source of confusion and frustation for more typical
debugger users.
I imagine there will be more of these "warn once per whatever" style
warnings that we will want to add in the future and we'll need to
come up with a better way for enabling/disabling them. But I'm not
srue what form that warning settings should take and I didn't want
to code up something that we regret later, so for now I just added
another process setting for this one warning.
<rdar://problem/19281172>
llvm-svn: 244190
dSYMs, or reading binaries out of memory to the 'Host' log channel.
There's more to be done here, both for Mac and for other platforms,
but the initial set of new loggings are useful enough to check in
at this point.
llvm-svn: 243200
Summary:
This replaces (void)x; usages where they x was subsequently
involved in an assertion with this macro to make the
intent more clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11451
llvm-svn: 243074
Changed the "jthreads" key/value in the stop reply packets to be "jstopinfo". This JSON only contains threads with valid stop reasons and allows us not to have to ask about other threads via qThreadStopInfo when we are stepping. The "jstopinfo" only gets sent if there are more than one thread since the stop reply packet contains all the info needed for a single thread.
Added a Process::WillPublicStop() in case process subclasses want to do any extra gathering for public stops. For ProcessGDBRemote, we end up sending a jThreadsInfo packet to gather all expedited registers, expedited memory and MacOSX queue information. We only do this for public stops to minimize the packets we send when we have multiple private stops. Multiple private stops happen when a source level single step, step into or step out run the process multiple times while implementing the stepping, and none of these private stops make it out to the UI via notifications because they are private stops.
llvm-svn: 242593
For Hexagon we want to be able to call functions during debugging, however currently lldb only supports this when there is JIT support.
Although emulation using IR interpretation is an alternative, it is currently limited in that it can't make function calls.
In this patch we have extended the IR interpreter so that it can execute a function call on the target using register manipulation.
To do this we need to handle the Call IR instruction, passing arguments to a new thread plan and collecting any return values to pass back into the IR interpreter.
The new thread plan is needed to call an alternative ABI interface of "ABI::PerpareTrivialCall()", allowing more detailed information about arguments and return values.
Reviewers: jingham, spyffe
Subscribers: emaste, lldb-commits, ted, ADodds, deepak2427
Differential Revision: http://reviews.llvm.org/D9404
llvm-svn: 242137
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
a hand-called function from the private state thread. The problem
was that on the way out of the private state thread, we try to drop
the run lock. That is appropriate for the main private state thread,
but not the secondary private state thread. Only the thread that
spawned them can know whether this is an appropriate thing to do or
not.
<rdar://problem/21375352>
llvm-svn: 240461
The problem was the mutex was only protecting the setting of m_exit_string and m_exit_string, but this function relies on the m_private_state being set to eStateExited in order to prevent more than 1 client setting the exit status. We want to only allow the first caller to succeed.
On MacOSX we have a thread that reaps the process we are debugging, and we also have a thread that monitors the debugserver process. When a process exists, the ProcessGDBRemote::AsyncThread() would set the exit status to the correct value and then another thread would reap the debugserver process and they would often both end up in Process::SetExitStatus() at the same time. With the mutex at the top we allow all variables to be set and the m_private_state to be set to eStateExited _before_ the other thread (debugserver reaped) can try to set th exist status to -1 and "lost connection to debugserver" being set as the exit status.
This was probably an issue for lldb-server as well and could very well cleanup some tests that might have been expecting a specific exit status from the process being debugged.
llvm-svn: 238794
Summary:
This should solve the issue of sending denormalized paths over gdb-remote
if we stick to GetPath(false) in GDBRemoteCommunicationClient, and let the
server handle any denormalization.
Reviewers: ovyalov, zturner, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D9728
llvm-svn: 238604
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
Summary:
IOHandlerProcessSTDIO::Run() was opening the pipe for interrupt requests lazily. This was racing
with another thread executing IOHandlerProcessSTDIO::Cancel() simultaneously. I fix this by
opening the pipe in the object constructor. The pipe will be automatically closed when the object
is destroyed.
Test Plan: Tests pass on linux.
Reviewers: clayborg, ribrdb
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10060
llvm-svn: 238423
This was the original cause of the file descriptor leaks that would cause the test suite to die after running a few hundred processes since no process would ever get destroyed and the communication channel in ProcessGDBRemote and the ProcessIOHandler would never close their pipes.
This process leak was previously worked around by closing the pipes when the communication channel was disconnected.
This was found by using "ptr_refs" from the heap.py in the lldb.macosx.heap module. It was able to find all strong references to the Process and helped me to figure out who was holding this extra reference.
llvm-svn: 238392
Summary:
There is an issue in lldb where the command prompt can appear at the wrong time. The partial fix
we have in for this is not working all the time and is introducing unnecessary delays. This
change does:
- Change Process:SyncIOHandler to use integer start id's for synchronization to avoid it being
confused by quick start-stop cycles. I picked this up from a suggested patch by Greg to
lldb-dev.
- coordinates printing of asynchronous text with the iohandlers. This is also based on a
(different) Greg's patch, but I have added stronger synchronization to it to avoid races.
Together, these changes solve the prompt problem for me on linux (both with and without libedit).
I think they should behave similarly on Mac and FreeBSD and I think they will not make matters
worse for windows.
Test Plan: Prompt comes out alright. All tests still pass on linux.
Reviewers: clayborg, emaste, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9823
llvm-svn: 238313
The main issue was the Communication::Disconnect() was calling its Connection::Disconnect() but this wouldn't release the pipes that the ConnectionFileDescriptor was using. We also have someone that is holding a strong reference to the Process so that when you re-run, target replaces its m_process_sp, but it doesn't get destructed because someone has a strong reference to it. I need to track that down. But, even if we have a strong reference to the a process that is outstanding, we need to call Process::Finalize() to have it release as much of its resources as possible to avoid memory bloat.
Removed the ProcessGDBRemote::SetExitStatus() override and replaced it with ProcessGDBRemote::DidExit().
Now we aren't leaking file descriptors and the stand alone test suite should run much better.
llvm-svn: 238089
the changes in r233255/r233258. Normally if lldb attaches to
a running process, when we call Process::Destroy, we want to detach
from the process. If lldb launched the process itself, ::Destroy
should kill it.
However, if we attach to a process and the driver calls SBProcess::Kill()
(which calls Destroy), we need to kill it even if we didn't launch it
originally.
The force_kill param allows for the SBProcess::Kill method to force the
behavior of Destroy.
<rdar://problem/20424439>
llvm-svn: 235158
virtual void
LanguageRuntime::ModulesDidLoad (const ModuleList &module_list);
Then reorganized how the objective C plug-in is notified so it will work for all LanguageRuntime subclasses.
llvm-svn: 235118
There were a couple of real bugs here regarding error checking and
signed/unsigned comparisons, but mostly these were just noise.
There was one class of bugs fixed here which is particularly
annoying, dealing with MSVC's non-standard behavior regarding
the underlying type of enums. See the comment in
lldb-enumerations.h for details. In short, from now on please use
FLAGS_ENUM and FLAGS_ANONYMOUS_ENUM when defining enums which
contain values larger than can fit into a signed integer.
llvm-svn: 233943
Guard against this by setting a new "m_finalizing" flag that lets us know we are in the process of finalizing.
<rdar://problem/20369152>
llvm-svn: 233935
Summary:
This patch fixes -gdb-exit for locally target. It includes the following changes:
# Fix Process::Finalize
# Use SBProcess::Destroy in -gdb-exit
Reviewers: abidh, zturner, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D8298
llvm-svn: 233255
Previously the remote module sepcification was fetched only from the
remote platform. With this CL if we have a remote process then we ask it
if it have any information from a given module. It is required because
on android the dynamic linker only reports the name of the SO file and
the platform can't always find it without a full path (the process can
do it based on /proc/<pid>/maps).
Differential revision: http://reviews.llvm.org/D8547
llvm-svn: 233061
Specifically, there were some functions for converting enums
to strings and a function for matching a string using a specific
matching algorithm. This moves those functions to more appropriate
headers in lldb/Utility and updates references to include the
new headers.
llvm-svn: 232673
So that we don't have to update every single #include in the entire
codebase to #include this new header (which used to get included by
lldb-private-log.h, we automatically #include "Logging.h" from
within "Log.h".
llvm-svn: 232653
# Fix CommandInterpreter.Broadcaster name (it should be the same as CommandInterpreter::GetStaticBroadcasterClass())
# Prevent the same error in Process.Broadcaster
# Fix SBCommandInterpreter::GetBroadcasterClass (it should call CommandInterpreter::GetStaticBroadcasterClass(), was Communication::GetStaticBroadcasterClass())
llvm-svn: 232500
Summary:
There was a race condition regarding the output of the inferior process. The reading of the
output is performed on a separate thread, and there was no guarantee that the output will get
eventually consumed. Because of that, it was happening that calling Process::GetSTDOUT was not
returning anything even though the process was terminated and would definitely not produce any
further output. This was usually happening only under very heavy system load, but it can be
reproduced by placing an usleep in the stdio thread (Process::STDIOReadThreadBytesReceived).
This patch addresses this by adding synchronization capabilities to the Communication thread.
After calling Communication::SynchronizeWithReadThread one can be sure that all pending input has
been processed by the read thread. This function is then called after every public event which
stops the process to obtain the entire process output.
Test Plan: TestProcessIO.py should now succeed every time instead of flaking in and out.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8246
llvm-svn: 232023
Summary:
starting a debug session on linux with -o "process launch" lldb parameter was failing since
Target::Launch (in sychronous mode) is expecting to be able to receive public process events.
However, PlatformLinux did not set up event hijacking on process launch, which caused these
events to be processed elsewhere and left Target::Launch hanging. This patch enables event
interception in PlatformLinux (which was commented out).
Upon enabling event interception, I noticed an issue, which I traced back to the inconsistent
state of public run lock, which remained false even though public and private process states were
"stopped". I addressed this by making sure the run lock is "stopped" upon exit from
WaitForProcessToStop (which already had similar provisions for other return paths).
Test Plan: This should fix the intermittent TestFormats failure we have been experiencing on Linux.
Reviewers: jingham, clayborg, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8079
llvm-svn: 231460
Earlier this week I was able to get clang-cl on Windows to be
able to self host. This opened the door to being able to
get a whole new slew of warnings for the Windows build.
This patch fixes all of the warnings, many of which were real
bugs.
llvm-svn: 230522
Process::Launch try to catch a stop signal after launching a process. If
it is unsuccessful it destroy the process but previously still reported
that the process launched successfully. This behavior caused a
deadlock. With thic change the process launch error reported correctly.
Differential revision: http://reviews.llvm.org/D7784
llvm-svn: 230212
We want to forward stdin when stdio is not disabled and when we're not
redirecting stdin from a file.
renamed m_stdio_disable to m_stdin_forward and inverted value because
that's what we want to remember.
There was previously a bug that if you redirected stdin from a file,
stdout and stderr would also be redirected to /dev/null
Adds support for remote target to TestProcessIO.py
Fixes ProcessIOTestCase.test_stdin_redirection_with_dwarf for remote
Linux targets
llvm-svn: 228744
Processes running on a remote target can already send $O messages
to send stdout but there is no way to send stdin to a remote
inferior.
This allows processes using the API to pump stdin into a remote
inferior process.
It fixes a hang in TestProcessIO.py when running against a remote
target.
llvm-svn: 228419
Summary:
This patch fixes *stopped notification for remote target when started with eLaunchFlagStopAtEntry (for example, using "process launch -s").
See explanation below:
```
Target::Launch (ProcessLaunchInfo &launch_info, Stream *stream)
{
...
if (state != eStateConnected && platform_sp && platform_sp->CanDebugProcess ())
{
...
}
else
{
...
if (m_process_sp)
error = m_process_sp->Launch (launch_info);
}
if (error.Success())
{
if (launch_info.GetFlags().Test(eLaunchFlagStopAtEntry) == false)
{
....
}
-- missing event if eLaunchFlagStopAtEntry is set --
m_process_sp->RestoreProcessEvents ();
}
...
return error
```
Also this patch contains tests and you can check how it works.
Reviewers: zturner, clayborg, abidh
Reviewed By: clayborg
Subscribers: clayborg, abidh, zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D7273
llvm-svn: 228417
CommandInterpreter's execution context AFTER the process had started running
and before it initially stopped. Also fixed one test case that was implicitly
using this (and an abuse of the async mode) to accidentally succeed.
<rdar://problem/16814726>
llvm-svn: 226528
This is currently controlled by a setting:
(lldb) settings set target.process.python-os-plugin-path <path>
Or clearing it with:
(lldb) settings clear target.process.python-os-plugin-path
The process will now reload the OperatingSystem plug-in.
This was implemented by:
- adding the ability to set a notify callback for when an option value is changed
- added the ability for the process plug-in to load the operating system plug-in on the fly
- fixed bugs in the Process::GetStatus() so all threads are displayed if their thread IDs are larger than 32 bits
- adding a callback in ProcessProperties to tell when the "python-os-plugin-path" is changed by the user
- fixing a crasher in ProcessMachCore that happens when updating the thread list when the OS plugin is reloaded
llvm-svn: 225831
This patch makes a number of improvements to the Pipe interface.
1) An interface (PipeBase) is provided which exposes pure virtual
methods for any implementation of Pipe to override. While not
strictly necessary, this helps catch errors where the interfaces
are out of sync.
2) All methods return lldb_private::Error instead of returning bool
or void. This allows richer error information to be propagated
up to LLDB.
3) A new ReadWithTimeout() method is exposed in the base class and
implemented on Windows.
4) Support for both named and anonymous pipes is exposed through the
base interface and implemented on Windows. For creating a new
pipe, both named and anonymous pipes are supported, and for
opening an existing pipe, only named pipes are supported.
New methods described in points #3 and #4 are stubbed out on posix,
but fully implemented on Windows. These should be implemented by
someone on the linux / mac / bsd side.
Reviewed by: Greg Clayton, Oleksiy Vyalov
Differential Revision: http://reviews.llvm.org/D6686
llvm-svn: 224442
Summary:
If a stream contains an empty string, no need to append it to the output
(otherwise we end up with a blank line). Also, no need to print a status
message when the state changes to connected, as this string brings no
information -- "Process 0" does not mean anything to the user, and the
process being connected has no meaning either.
Test Plan:
Connect to a remote linux platform mode daemon with `platform select
remote-linux` followed by `platform connect ...`, create a target and
run it, observe the output. Also, run the full test suite (dosep.py).
Before:
(lldb) [...] connect, etc.
(lldb) r
Process 0 connected
Process 5635 launched: '/Users/sas/Source/test' (x86_64)
Process 5635 stopped
After:
(lldb) [...] connect, etc.
(lldb) r
Process 5635 launched: '/Users/sas/Source/test' (x86_64)
Process 5635 stopped
Reviewers: tfiala, vharron, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D6593
llvm-svn: 224188
The issue with Thumb IT (if/then) instructions is the IT instruction preceeds up to four instructions that are made conditional. If a breakpoint is placed on one of the conditional instructions, the instruction either needs to match the thumb opcode size (2 or 4 bytes) or a BKPT instruction needs to be used as these are always unconditional (even in a IT instruction). If BKPT instructions are used, then we might end up stopping on an instruction that won't get executed. So if we do stop at a BKPT instruction, we need to continue if the condition is not true.
When using the BKPT isntructions are easy in that you don't need to detect the size of the breakpoint that needs to be used when setting a breakpoint even in a thumb IT instruction. The bad part is you will now always stop at the opcode location and let LLDB determine if it should auto-continue. If the BKPT instruction is used, the BKPT that is used for ARM code should be something that also triggers the BKPT instruction in Thumb in case you set a breakpoint in the middle of code and the code is actually Thumb code. A value of 0xE120BE70 will work since the lower 16 bits being 0xBE70 happens to be a Thumb BKPT instruction.
The alternative is to use trap or illegal instructions that the kernel will translate into breakpoint hits. On Mac this was 0xE7FFDEFE for ARM and 0xDEFE for Thumb. The darwin kernel currently doesn't recognize any 32 bit Thumb instruction as a instruction that will get turned into a breakpoint exception (EXC_BREAKPOINT), so we had to use the BKPT instruction on Mac. The linux kernel recognizes a 16 and a 32 bit instruction as valid thumb breakpoint opcodes. The benefit of using 16 or 32 bit instructions is you don't stop on opcodes in a IT block when the condition doesn't match.
To further complicate things, single stepping on ARM is often implemented by modifying the BCR/BVR registers and setting the processor to stop when the PC is not equal to the current value. This means single stepping is another way the ARM target can stop on instructions that won't get executed.
This patch does the following:
1 - Fix the internal debugserver for Apple to use the BKPT instruction for ARM and Thumb
2 - Fix LLDB to catch when we stop in the middle of a Thumb IT instruction and continue if we stop at an instruction that won't execute
3 - Fixes this in a way that will work for any target on any platform as long as it is ARM/Thumb
4 - Adds a patch for ignoring conditions that don't match when in ARM mode (see below)
This patch also provides the code that implements the same thing for ARM instructions, though it is disabled for now. The ARM patch will check the condition of the instruction in ARM mode and continue if the condition isn't true (and therefore the instruction would not be executed). Again, this is not enable, but the code for it has been added.
<rdar://problem/19145455>
llvm-svn: 223851
Fixed include:
- Change Platform::ResolveExecutable(...) to take a ModuleSpec instead of a FileSpec + ArchSpec to help resolve executables correctly when we have just a path + UUID (no arch).
- Add the ability to set the listener in SBLaunchInfo and SBAttachInfo in case you don't want to use the debugger as the default listener.
- Modified all places that use the SBLaunchInfo/SBAttachInfo and the internal ProcessLaunchInfo/ProcessAttachInfo to not take a listener as a parameter since it is in the launch/attach info now
- Load a module's sections by default when removing a module from a target. Since we create JIT modules for expressions and helper functions, we could end up with stale data in the section load list if a module was removed from the target as the section load list would still have entries for the unloaded module. Target now has the following functions to help unload all sections a single or multiple modules:
size_t
Target::UnloadModuleSections (const ModuleList &module_list);
size_t
Target::UnloadModuleSections (const lldb::ModuleSP &module_sp);
llvm-svn: 222167
Improvements include:
* Use of libedit's wide character support, which is imperfect but a distinct improvement over ASCII-only
* Fallback for ASCII editing path
* Support for a "faint" prompt clearly distinguished from input
* Breaking lines and insert new lines in the middle of a batch by simply pressing return
* Joining lines with forward and backward character deletion
* Detection of paste to suppress automatic formatting and statement completion tests
* Correctly reformatting when lines grow or shrink to occupy different numbers of rows
* Saving multi-line history, and correctly preserving the "tip" of history during editing
* Displaying visible ^C and ^D indications when interrupting input or sending EOF
* Fledgling VI support for multi-line editing
* General correctness and reliability improvements
llvm-svn: 222163
There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be.
llvm-svn: 220254
an uninitialized value. In reality the code block that
initializes it and the code block that restores it will always
match up - but the analyzer doesn't know that and I want to
quiet it, so...
clang static analyzer fixit.
llvm-svn: 219869
Reviewed at http://reviews.llvm.org/D5738
This adds an SB API into SBProcess:
bool SBProcess::IsInstrumentationRuntimePresent(InstrumentationRuntimeType type);
which simply tells whether a particular InstrumentationRuntime (read "ASan") plugin is present and active.
llvm-svn: 219560
Reviewed at http://reviews.llvm.org/D5592
This patch gives LLDB some ability to interact with AddressSanitizer runtime library, on top of what we already have (historical memory stack traces provided by ASan). Namely, that's the ability to stop on an error caught by ASan, and access the report information that are associated with it. The report information is also exposed into SB API.
More precisely this patch...
adds a new plugin type, InstrumentationRuntime, which should serve as a generic superclass for other instrumentation runtime libraries, these plugins get notified when modules are loaded, so they get a chance to "activate" when a specific dynamic library is loaded
an instance of this plugin type, AddressSanitizerRuntime, which activates itself when it sees the ASan dynamic library or founds ASan statically linked in the executable
adds a collection of these plugins into the Process class
AddressSanitizerRuntime sets an internal breakpoint on __asan::AsanDie(), and when this breakpoint gets hit, it retrieves the report information from ASan
this breakpoint is then exposed as a new StopReason, eStopReasonInstrumentation, with a new StopInfo subclass, InstrumentationRuntimeStopInfo
the StopInfo superclass is extended with a m_extended_info field (it's a StructuredData::ObjectSP), that can hold arbitrary JSON-like data, which is the way the new plugin provides the report data
the "thread info" command now accepts a "-s" flag that prints out the JSON data of a stop reason (same way the "-j" flag works now)
SBThread has a new API, GetStopReasonExtendedInfoAsJSON, which dumps the JSON string into a SBStream
adds a test case for all of this
I plan to also get rid of the original ASan plugin (memory history stack traces) and use an instance of AddressSanitizerRuntime for that purpose.
Kuba
llvm-svn: 219546
As part of getting ConnectionFileDescriptor working on Windows,
there is going to be alot of platform specific work to be done.
As a result, the implementation is moving into Host. This patch
performs the code move and fixes up call-sites appropriately.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5548
llvm-svn: 219143
There are several places where multiple threads are accessing the same variables simultaneously without any kind of protection. I propose using std::atomic<> to make it safer. I did a special build of lldb, using the google tool 'thread sanitizer' which identified many cases of multiple threads accessing the same memory. std::atomic is low overhead and does not use any locks for simple types such as int/bool.
See http://reviews.llvm.org/D5302 for more details.
Change by Shawn Best.
llvm-svn: 217818
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
lldb's internal memory cache chunks that are read from the remote
system. For a remote connection that is especially slow, a user may
need to reduce it; reading a 512 byte chunk of memory whenever a
4-byte region is requested may not be the right decision in these
kinds of environments.
<rdar://problem/18175117>
llvm-svn: 217083
Sean Callanan