The docs now build cleanly. Yay!
The following warnings were fixed:
/home/sean/pg/llvm/llvm/docs/HowToReleaseLLVM.rst:364: WARNING: Enumerated list ends without a blank line; unexpected unindent.
/home/sean/pg/llvm/llvm/docs/InAlloca.rst:: WARNING: document isn't included in any toctree
/home/sean/pg/llvm/llvm/docs/CodingStandards.rst:85: WARNING: Title underline too short.
Supported C++11 Language and Library Features
-------------------------------------------
/home/sean/pg/llvm/llvm/docs/CodingStandards.rst:85: WARNING: Title underline too short.
Supported C++11 Language and Library Features
-------------------------------------------
/home/sean/pg/llvm/llvm/docs/GettingStarted.rst:185: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/home/sean/pg/llvm/llvm/docs/GettingStarted.rst:565: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/home/sean/pg/llvm/llvm/docs/GettingStarted.rst:567: WARNING: Block quote ends without a blank line; unexpected unindent.
llvm-svn: 202603
The switch has been thrown. While I'm still watching for any failures or
problems with this, the documentation can go ahead and move forward.
llvm-svn: 202566
bots when using the standard library facilities. The missing pieces here
aren't always in useful discreet chunks.
Fortunately, the missing pieces are few and far between, and we can
emulate most of them in our headers as needed.
Based on feedback from Lang and Dave.
llvm-svn: 202548
A lot of this is writing down common knowledge and things often
communicated on mailing lists and in discussions. It could live in the
Programmer's Manual alternatively, but that felt slightly less
well-fitting.
It also includes (and was motivated by) the section on the relevant
language standards for LLVM and the specific features that will be
enabled with the switch to C++11.
With this, all of the documentation for the C++11 switch is, I think, in
place. I plan to flip the switch RSN. =]
llvm-svn: 202497
standards.
It claims the document intentionally doesn't give fixed standards for
brace placement or spacing, and then the document goes on to do
precisely that in several places. Instead, try to highlight that even
these rules are simply *guidance* which may be trumped by some other
circumstance or the local conventions of code.
I'm not trying to change the thrust of this part of the document, and if
folks think this does so, I'm happy to re-wordsmith it. I just don't
want it to be so self-contradicting.
llvm-svn: 202495
a more modern host C++ toolchain for Linux distros where folks sometimes
don't have a good option to get one as part of their system.
This is a first cut, so feedback, testing, and suggestions are very,
very welcom. This is one of the last real documentation changes that was
specifically requested prior to switching LLVM and Clang to build in
C++11 mode by default.
llvm-svn: 202486
seems unlikely to be added. It also doesn't seem like it should be part
of the build system at all (consider out-of-tree builds).
We should probably add nice, easy tool for this that works both for svn
client trees and git-svn client trees, but it probably won't be spelled
"make update".
llvm-svn: 202430
toolchain of LLVM. These are already being enforced by the build system
and have been discussed quite a few times on the lists, but
documentation is important. =]
Also, garbage collect the majority of the information about broken host
GCC toolchains. These aren't really relevant any more as they're all
older than the minimum requirement. I've left a few notes about
compilers one step older than the current requirement as these compilers
are at least conceivable to use, and it's better to preserve this kind
of hard-won institutional knowledge.
The next step will be some specific docs on how to set up a sufficiently
modern host toolchain if your system doesn't come with one. But that'll
be tomorrow. =]
llvm-svn: 202375
bits of software and to use a modern GCC version.
The Subversion bit was weird anyways -- it has nothing to do with
compiling LLVM. Also, there are many other ways to get at the trunk
source (git, git-svn, etc).
The TeXinfo thing... I have no idea about. But you can get a working
LLVM w/o it pretty easily. If man pages or something are missing, that
hardly seems like a problem. If folks really want this back, let me
know, but it seems mostly like a distraction.
I'd still like to separate this into:
- Required software to compile.
- Optional software to compile.
- Required software for certain *contributor* activities (like
regenerating configure scripts).
Also we need to mention that there are multiple options for build
systems, and the differences.
Also we should mention Windows.
Also probably other stuff I'm forgetting.
I'm wondering if this whole thing needs to be shot in the head and we
should just start a new, simpler getting started that doesn't have so
many years of accumulated stuff that is no longer relevant.
llvm-svn: 202373
getting started guide.
Some highlights:
- I heard there was this Clang compiler that you could use for your
host compiler. Not sure though.
- We no longer have a GCC frontend with weird build restrictions.
- Windows is doing a bit better than partially supported.
- We nuked everything to do with itanium.
- SPUs? Really?
- Xcode 2.5 and gcc 4.0.1 are really not a concern -- they don't work.
- OMG, we actually tried building LLVM on Alpha? Really?
- PowerPC works pretty well these days.
There is still a lot of stuff here I'm pretty dubious about, but I nuked
most of what was actively misleading, out of date, or patently wrong.
Some of it (mingw stuff especially) isn't really lacking, its just that
the comments here were actively wrong. Hopefully folks that know those
platforms can add back correct / modern information.
llvm-svn: 202370
The original text is very terse, so I've expanded on it.
Specifically, in the original text:
* "The selector value is a positive number if the exception matched a
type info" -- It wasn't clear that this meant "if the exception
matched a 'catch' clause".
* "If nothing is matched, the behavior of the program is
`undefined`_." -- It's actually implementation-defined in C++
rather than undefined, as the new text explains.
llvm-svn: 202209
This replaces the old NoIntegratedAssembler with at TargetOption. This is
more flexible and will be used to forward clang's -no-integrated-as option.
llvm-svn: 201836
Some references to llvm-gcc were so crusty that I wasn't sure how to
proceed and so I've left them intact.
I also slipped in a quick peephole fix to use a :doc: link instead of
raw HTML link.
llvm-svn: 201619
From a cursory look it seems like all the described commandline options
and such apply to clang just fine, but I'd appreciate a second opinion.
llvm-svn: 201616
Introducing llvm-profdata, a tool for merging profile data generated by
PGO instrumentation in clang.
- The name indicates a file extension of <name>.profdata. Eventually
profile data output by clang should be changed to that extension.
- llvm-profdata merges two profiles. However, the name is more general,
since it will likely pick up more tasks (such as summarizing a single
profile).
- llvm-profdata parses the current text-based format, but will be
updated once we settle on a binary format.
<rdar://problem/15949645>
llvm-svn: 201535
I noticed this convention from the commit logs. It seems like it
would be useful to document it, to encourage other committers to link
back to code reviews in their commits.
Differential Revision: http://llvm-reviews.chandlerc.com/D2678
llvm-svn: 201160
Fun fact: looking at the TableGen code (around TGParser.cpp:1166), the
only difference in handling is that adjacent regular string literals are
concatenated in the parser.
llvm-svn: 201035
They're called code fragments, but they are really multiline string
literals. Just spotted this usage in a patch by Aaron using "code
fragments" for holding documentation text. I remember someone bemoaning
the lack of multiline string literals in TableGen, so I'm explicitly
documenting that code fragments are multiline string literals.
Let it be known that any use case needing multiline string literals in
TableGen (such as descriptions of options, or whatnot) can use use
code fragments (instead of C-style string concatenation or exceedingly
long lines). E.g.
class Bar<int n>;
class Baz<int n>;
class Doc<string desc> {
string Desc = desc;
}
def Foo : Bar<1>, Baz<3>, Doc<[{
This Foo is a Bar, and also a Baz. It can take 3 values:
* Qux
* Quux
* Quuux
}]>;
llvm-svn: 201033
LowerExpectIntrinsic previously only understood the idiom of an expect
intrinsic followed by a comparison with zero. For llvm.expect.i1, the
comparison would be stripped by the early-cse pass.
Patch by Daniel Micay.
llvm-svn: 200664
This changes the PrologueEpilogInserter and LocalStackSlotAllocation passes to
follow the extended stack layout rules for sspstrong and sspreq.
The sspstrong layout rules are:
1. Large arrays and structures containing large arrays (>= ssp-buffer-size)
are closest to the stack protector.
2. Small arrays and structures containing small arrays (< ssp-buffer-size) are
2nd closest to the protector.
3. Variables that have had their address taken are 3rd closest to the
protector.
Differential Revision: http://llvm-reviews.chandlerc.com/D2546
llvm-svn: 200601
Calls with inalloca are lowered by skipping all stores for arguments
passed in memory and the initial stack adjustment to allocate argument
memory.
Now the frontend is responsible for the memory layout, and the backend
doesn't have to do any work. As a result these changes are pretty
minimal.
Reviewers: echristo
Differential Revision: http://llvm-reviews.chandlerc.com/D2637
llvm-svn: 200596
MSVC always places the 'this' parameter for a method first. The
implicit 'sret' pointer for methods always comes second. We already
implement this for __thiscall by putting sret parameters on the stack,
but __cdecl methods require putting both parameters on the stack in
opposite order.
Using a special calling convention allows frontends to keep the sret
parameter first, which avoids breaking lots of assumptions in LLVM and
Clang.
Fixes PR15768 with the corresponding change in Clang.
Reviewers: ributzka, majnemer
Differential Revision: http://llvm-reviews.chandlerc.com/D2663
llvm-svn: 200561
coding standards, and instead fix the existing section.
Thanks to Daniel Jasper for pointing out we already had a section
devoted to this topic. Instead of adding sections, just hack on this
section some. Also fix the example in the anonymous namespace section
below it to agree with the new advice.
As a re-cap, this switches the LLVM preferred style to never indent
namespaces. Having two approaches just led to endless (and utterly
pointless) debates about what was "small enough". This wasn't helping
anyone. The no-indent rule is easy to understand and doesn't really make
anything harder to read. Moreover, with tools like clang-format it is
considerably nicer to have simple consistent rules.
llvm-svn: 199637
(and to mention namespace ending comments). This is based on a quick
discussion on the developer mailing list where there was essentially no
objections to a simple and consistent rule. This should avoid future
debates about whether or not a namespace is "big enough" to indent. It
also matches clang-format's current behavior with LLVM source code which
hasn't really seen any opposition in code reviews that I spot checked.
llvm-svn: 199620
Summary:
The only current use of this flag is to mark the alloca as dynamic, even
if its in the entry block. The stack adjustment for the alloca can
never be folded into the prologue because the call may clear it and it
has to be allocated at the top of the stack.
Reviewers: majnemer
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2571
llvm-svn: 199525
This patch adds two new target-independent calling conventions for runtime
calls - PreserveMost and PreserveAll.
The target-specific implementation for X86-64 is defined as following:
- Arguments are passed as for the default C calling convention
- The same applies for the return value(s)
- PreserveMost preserves all GPRs - except R11
- PreserveAll preserves all GPRs and all XMMs/YMMs - except R11
Reviewed by Lang and Philip
llvm-svn: 199508
This makes things a lot easier, because we can now talk about the
"argument allocation", which allocates all the memory for the call in
one shot.
The only functional change is to the verifier for a feature that hasn't
shipped yet.
llvm-svn: 199434
Representing dllexport/dllimport as distinct linkage types prevents using
these attributes on templates and inline functions.
Instead of introducing further mixed linkage types to include linkonce and
weak ODR, the old import/export linkage types are replaced with a new
separate visibility-like specifier:
define available_externally dllimport void @f() {}
@Var = dllexport global i32 1, align 4
Linkage for dllexported globals and functions is now equal to their linkage
without dllexport. Imported globals and functions must be either
declarations with external linkage, or definitions with
AvailableExternallyLinkage.
llvm-svn: 199218
Representing dllexport/dllimport as distinct linkage types prevents using
these attributes on templates and inline functions.
Instead of introducing further mixed linkage types to include linkonce and
weak ODR, the old import/export linkage types are replaced with a new
separate visibility-like specifier:
define available_externally dllimport void @f() {}
@Var = dllexport global i32 1, align 4
Linkage for dllexported globals and functions is now equal to their linkage
without dllexport. Imported globals and functions must be either
declarations with external linkage, or definitions with
AvailableExternallyLinkage.
llvm-svn: 199204
Use separate callee-save masks for XMM and YMM registers for anyregcc on X86 and
select the proper mask depending on the target cpu we compile for.
llvm-svn: 198985
Before this patch any program that wanted to know the final symbol name of a
GlobalValue had to link with Target.
This patch implements a compromise solution where the mangler uses DataLayout.
This way, any tool that already links with Target (llc, clang) gets the exact
behavior as before and new IR files can be mangled without linking with Target.
With this patch the mangler is constructed with just a DataLayout and DataLayout
is extended to include the information the Mangler needs.
llvm-svn: 198438
During the years there have been some attempts at figuring out how to
align byval arguments. A look at the commit log suggests that they
were
* Use the ABI alignment.
* When that was not sufficient for x86-64, I added the 's' specification to
DataLayout.
* When that was not sufficient Evan added the virtual getByValTypeAlignment.
* When even that was not sufficient, we just got the FE to add the alignment
to the byval.
This patch is just a simple cleanup that removes my first attempt at fixing the
problem. I also added an AArch64 implementation of getByValTypeAlignment to
make sure this patch is a nop. I also left the 's' parsing for backward
compatibility.
I will send a short email to llvmdev about the change for anyone maintaining
an out of tree target.
llvm-svn: 198287
These still have "experimental" status, meaning we don't guarantee
backward compatibility. However, they are already actively used by the
open source WebKit project, and have started to be adopted by other
projects.
llvm-svn: 197930
The inalloca attribute is designed to support passing C++ objects by
value in the Microsoft C++ ABI. It behaves the same as byval, except
that it always implies that the argument is in memory and that the bytes
are never copied. This attribute allows the caller to take the address
of an outgoing argument's memory and execute arbitrary code to store
into it.
This patch adds basic IR support, docs, and verification. It does not
attempt to implement any lowering or fix any possibly broken transforms.
When this patch lands, a complete description of this feature should
appear at http://llvm.org/docs/InAlloca.html .
Differential Revision: http://llvm-reviews.chandlerc.com/D2173
llvm-svn: 197645
They were out of place since the introduction of arbitrary precision integer
types.
This also synchronizes the documentation to Types.h, so it refers to first class
types and single value types.
llvm-svn: 196661
It appears to be referring to nonexistent entities. This must be a
carry-over from an older version of the document.
Patch by Mikael Lyngvig!
llvm-svn: 196342
* Update build instructions to reflect the current source tree layout.
* Don't inflict CVS on readers; there's a perfectly good git mirror.
* configure with --disable-werror making it possible to build using clang.
* ar and nm-new now support the -plugin option.
llvm-svn: 196069
In some case, it may be required to build LLVM in C++11 mode, as some the subprojects (like lldb) requires it.
This mimics the autoconf behaviour.
However, given the discussions on the switch to C++11 of the codebase, this behaviour should evolve to default to C++11 with some checks of the compiler capabilities.
llvm-svn: 195727
MappingTrait template specializations can now have a validate() method which
performs semantic checking. For details, see <http://llvm.org/docs/YamlIO.html>.
llvm-svn: 195286
This is the first step to fix pr17918.
It extends the .section directive a bit, inspired by what the ELF one looks
like. The problem with using linkonce is that given
.section foo
.linkonce....
.section foo
.linkonce
we would already have switched sections when getting to .linkonce. The cleanest
solution seems to be to add the comdat information in the .section itself.
llvm-svn: 195148
(except functions marked always_inline).
Functions with 'optnone' must also have 'noinline' so they don't get
inlined into any other function.
Based on work by Andrea Di Biagio.
llvm-svn: 195046
for release builds.
This is a follow-up to r194589. Aaron pointed out that building
libraries with /MT and using them in an application that uses a
different run-time library can be a bad idea.
Move the option to build with /MT behind a CMake option so it can be
turned on selectively, such as when building the toolchain installer.
llvm-svn: 194596
after the 3.4 release to the release notes. See the *lengthy* llvmdev
and cfe-dev threads on this subject. There will be more emails,
discussion and announcements, but I want to make noise in as many places
as I can to get everyone's concerns voiced and understood.
llvm-svn: 194183
linkonce_odr_auto_hide was in incomplete attempt to implement a way
for the linker to hide symbols that are known to be available in every
TU and whose addresses are not relevant for a particular DSO.
It was redundant in that it all its uses are equivalent to
linkonce_odr+unnamed_addr. Unlike those, it has never been connected
to clang or llvm's optimizers, so it was effectively dead.
Given that nothing produces it, this patch just nukes it
(other than the llvm-c enum value).
llvm-svn: 193865
Currently, instead of showing up as link, it is rendered as
...of FunctionPass <writing-an-llvm-pass-FunctionPass>. The...
PR17733. Patch by Tay Ray Chuan!
llvm-svn: 193698
Major steps include:
1). introduces a not-addr-taken bit-field in GlobalVariable
2). GlobalOpt pass sets "not-address-taken" if it proves a global varirable
dosen't have its address taken.
3). AA use this info for disambiguation.
llvm-svn: 193251
There doesn't seem to be a need in checking if a directory exists if we
will just rm -rf it once we affirm that it does. Instead, just blindly
try to delete it.
This fixes PR17541.
llvm-svn: 192679
part of getting started with LLVM.
The LLVM getting started document is in woeful need of attention. I may
get to some of this, but some random notes for folks interested:
1) We need to separate the getting started steps for folks who are
interested in the core LLVM libs and nothing else, folks interested
in a nifty C++ toolchain and nothing else, and folks interested in
both.
2) We should include documentation for both release archives, svn, and
git in equal portion, and we should document all of the various
repositories of interest: llvm, clang, clang-tools-extra,
compiler-rt, lld, libcxx, test-suite.
3) We should document the CMake build. We should probably document the
CMake build first, and give a fall-back set of docs for the Makefile
build for the use cases where that is still the preferred solution.
This would more closely match the use cases that folks in the open
source community are likely to have, and would remove a point of
discrepancy between Linux, Windows, and Mac instructions.
4) Probably a ton of other modernization stuff that I've not thought of
here.
Anyways, if anyone at all is interested, please help clean up this
document. It is much needed.
llvm-svn: 189732
implementation files. While doc generation systems don't need this,
humans do benefit from it. Not everyone reads all code through doxygen.
llvm-svn: 189704
This function attribute indicates that the function is not optimized
by any optimization or code generator passes with the
exception of interprocedural optimization passes.
llvm-svn: 189101
This adds a llvm.copysign intrinsic; We already have Libfunc recognition for
copysign (which is turned into the FCOPYSIGN SDAG node). In order to
autovectorize calls to copysign in the loop vectorizer, we need a corresponding
intrinsic as well.
In addition to the expected changes to the language reference, the loop
vectorizer, BasicTTI, and the SDAG builder (the intrinsic is transformed into
an FCOPYSIGN node, just like the function call), this also adds FCOPYSIGN to a
few lists in LegalizeVector{Ops,Types} so that vector copysigns can be
expanded.
In TargetLoweringBase::initActions, I've made the default action for FCOPYSIGN
be Expand for vector types. This seems correct for all in-tree targets, and I
think is the right thing to do because, previously, there was no way to generate
vector-values FCOPYSIGN nodes (and most targets don't specify an action for
vector-typed FCOPYSIGN).
llvm-svn: 188728
All libm floating-point rounding functions, except for round(), had their own
ISD nodes. Recent PowerPC cores have an instruction for round(), and so here I'm
adding ISD::FROUND so that round() can be custom lowered as well.
For the most part, this is straightforward. I've added an intrinsic
and a matching ISD node just like those for nearbyint() and friends. The
SelectionDAG pattern I've named frnd (because ISD::FP_ROUND has already claimed
fround).
This will be used by the PowerPC backend in a follow-up commit.
llvm-svn: 187926
This change makes test with RUN lines like
RUN: opt ... | FileCheck
fail if opt fails, even if it prints what FileCheck wants. Enabling this
found some interesting cases of broken tests that were not being noticed
because opt (or some other tool) was crashing late.
Pipefail is used when the shell supports it or when using the internal
python based tester.
llvm-svn: 187261
Back in r140220 we removed the autoconf code that would set LLVMCC_OPTION
since it was only used by the test-suite. This patch now removes code
that would only be used if LLVMCC_OPTION was set.
llvm-svn: 187154
CHECK-LABEL is meant to be used in place on CHECK on lines containing identifiers or other unique labels (they need not actually be labels in the source or output language, though.) This is used to break up the input stream into separate blocks delineated by CHECK-LABEL lines, each of which is checked independently. This greatly improves the accuracy of errors and fix-it hints in many cases, and allows for FileCheck to recover from errors in one block by continuing to subsequent blocks.
Some tests will be converted to use this new directive in forthcoming patches.
llvm-svn: 186162
"Writing an LLVM Compiler Backend" can be misinterpreted as meaning
"backend" in the sense of "using LLVM as a backend for your compiler for
your new language". This new name is less ambiguous.
As a bonus, this brings the title in line with the file name.
llvm-svn: 185377
The Builtin attribute is an attribute that can be placed on function call site that signal that even though a function is declared as being a builtin,
rdar://problem/13727199
llvm-svn: 185049
This patch modifies TableGen to generate a function in
${TARGET}GenInstrInfo.inc called getNamedOperandIdx(), which can be used
to look up indices for operands based on their names.
In order to activate this feature for an instruction, you must set the
UseNamedOperandTable bit.
For example, if you have an instruction like:
def ADD : TargetInstr <(outs GPR:$dst), (ins GPR:$src0, GPR:$src1)>;
You can look up the operand indices using the new function, like this:
Target::getNamedOperandIdx(Target::ADD, Target::OpName::dst) => 0
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src0) => 1
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src1) => 2
The operand names are case sensitive, so $dst and $DST are considered
different operands.
This change is useful for R600 which has instructions with a large number
of operands, many of which model single bit instruction configuration
values. These configuration bits are common across most instructions,
but may have a different operand index depending on the instruction type.
It is useful to have a convenient way to look up the operand indices,
so these bits can be generically set on any instruction.
llvm-svn: 184879
Archive files (.a) can have a symbol table indicating which object
files in them define which symbols. The purpose of this symbol table
is to speed up linking by allowing the linker the read only the .o
files it is actually going to use instead of having to parse every
object's symbol table.
LLVM's archive library currently supports a LLVM specific format for
such table. It is hard to see any value in that now that llvm-ld is
gone:
* System linkers don't use it: GNU ar uses the same plugin as the
linker to create archive files with a regular index. The OS X ar
creates no symbol table for IL files, I assume the linker just parses
all IL files.
* It doesn't interact well with archives having both IL and native objects.
* We probably don't want to be responsible for yet another archive
format variant.
This patch then:
* Removes support for creating and reading such index from lib/Archive.
* Remove llvm-ranlib, since there is nothing left for it to do.
We should in the future add support for regular indexes to llvm-ar for
both native and IL objects. When we do that, llvm-ranlib should be
reimplemented as a symlink to llvm-ar, as it is equivalent to "ar s".
llvm-svn: 184019
The effect of llvm.used is to introduce an invisible reference, so this seems
a reasonable restriction. It will be used to provide an easy ordering of
the entries in llvm.used.
llvm-svn: 183743
Several LLVM headers are moved. The code listings in
LLVM tutorial are not updated yet.
This CL removes the code replica in the .rst, and replace
them with a literalinclude directive, so that sphinx can
include the latest code automatically.
llvm-svn: 183607
This updates the debug info metadata schema documentation for various
schema changes made recently surrounding filename information for
scopes and the representation of imported entities.
llvm-svn: 182817
- llvm.loop.parallel metadata has been renamed to llvm.loop to be more generic
by making the root of additional loop metadata.
- Loop::isAnnotatedParallel now looks for llvm.loop and associated
llvm.mem.parallel_loop_access
- document llvm.loop and update llvm.mem.parallel_loop_access
- add support for llvm.vectorizer.width and llvm.vectorizer.unroll
- document llvm.vectorizer.* metadata
- add utility class LoopVectorizerHints for getting/setting loop metadata
- use llvm.vectorizer.width=1 to indicate already vectorized instead of
already_vectorized
- update existing tests that used llvm.loop.parallel and
llvm.vectorizer.already_vectorized
Reviewed by: Nadav Rotem
llvm-svn: 182802
Other than recognizing the attribute, the patch does little else.
It changes the branch probability analyzer so that edges into
blocks postdominated by a cold function are given low weight.
Added analysis and code generation tests. Added documentation for the
new attribute.
llvm-svn: 182638
This implements the @llvm.readcyclecounter intrinsic as the specific
MRC instruction specified in the ARM manuals for CPUs with the Power
Management extensions.
Older CPUs had slightly different methods which may also have to be
implemented eventually, but this should cover all v7 cases.
rdar://problem/13939186
llvm-svn: 182603
Describe that they are assigned numbered label using the same counter
as for unnamed temporaries.
Based on http://llvm.org/bugs/show_bug.cgi?id=16043 and mailing list
discussion.
Patch by Paul Sokolovsky!
llvm-svn: 182332
Summary:
This patch allows using \n inside long help strings for command-line
options, so that all lines are equally indented. This is not a perfect solution,
as we don't (and probably don't want to) know about terminal width, but it
allows to format long help strings somehow readable without manually padding
them with spaces. A motivating example is -help output from clang-format (source
code in tools/clang-format/ClangFormat.cpp, see cl options offset, length,
style, and dump-config).
Reviewers: atrick, alexfh
Reviewed By: alexfh
CC: llvm-commits, rafael
Differential Revision: http://llvm-reviews.chandlerc.com/D779
llvm-svn: 181608
The idea is that docs/ReleaseNotes.rst is 3.3 and will be copied to the
branch by the release manager just before creating the release
candidates.
This ReleaseNotes_34.rst will then be moved over ReleaseNotes.rst after
the 3.3 release.
llvm-svn: 181349
This patch wires up the SystemZ target in configure, so that it can now be
built using --enable-targets=systemz. It is not yet included in the default
build (--enable-targets=all); this will be done by a follow-up patch.
Patch by Richard Sandiford.
llvm-svn: 181208
Build attribute sections can now be read if they exist via ELFObjectFile, and
the llvm-readobj tool has been extended with an option to dump this information
if requested. Regression tests are also included which exercise these features.
Also update the docs with a fixed ARM ABI link and a new link to the Addenda
which provides the build attributes specification.
llvm-svn: 181009
This option expands shown relocations from single line to a dictionary
format:
Relocation {
Offset: 0x4
Type: R_386_32 (1)
Symbol: sym
Info: 0x0
}
llvm-svn: 179359
Add support for the COFF relocation types IMAGE_REL_I386_DIR32NB and
IMAGE_REL_AMD64_ADDR32NB for 32- and 64-bit respectively. These are
similar to normal 4-byte relocations except that they do not include
the base address of the image.
Image-relative relocations are used for debug information (32-bit) and
SEH unwind tables (64-bit).
A new MCSymbolRef variant called 'VK_COFF_IMGREL32' is introduced to
specify such relocations. For AT&T assembly, this variant can be accessed
using the symbol suffix '@imgrel'.
llvm-svn: 179240
Summary: This is the beginning of user documentation for the NVPTX back-end. I want to ensure I am integrating this properly into the rest of the LLVM documentation.
Differential Revision: http://llvm-reviews.chandlerc.com/D600
llvm-svn: 178428
Nobody says "the developer's list" or "commits archive"; they always say
"llvmdev" or "llvm-commits". It makes sense for our documentation to
at least make that association explicitly.
llvm-svn: 178425
std::lower_bound is the canonical "binary search" in the STL
(std::binary_search generally is not what you want). The name actually
makes a lot of sense (and also has a beautiful symmetry with the
std::upper_bound algorithm). The name is nonetheless non-obvious.
Also, remove mention of "radix search". It's not even clear how that
would work in the context of a sorted vector. AFAIK "radix search" only
makes sense when you have a trie-like data structure.
llvm-svn: 178376
DAG arguments can optionally be named:
(dag node, node:$name)
With this change, the node is also optional:
(dag node, node:$name, $name)
The missing node is treated as an UnsetInit, so the above is equivalent
to:
(dag node, node:$name, ?:$name)
This syntax is useful in output patterns where we currently require the
types of variables to be repeated:
def : Pat<(subc i32:$b, i32:$c), (SUBCCrr i32:$b, i32:$c)>;
This is preferable:
def : Pat<(subc i32:$b, i32:$c), (SUBCCrr $b, $c)>;
llvm-svn: 177843
The new wording cannot be construed as suggesting the use of
SmallVectorImpl<T> as e.g. a class member (just because the class
happens to be in an interface).
llvm-svn: 177778
of complex instruction operands (e.g. address modes).
Currently, if a Pat pattern creates an instruction that has a complex
operand (i.e. one that consists of multiple sub-operands at the MI
level), this operand must match a ComplexPattern DAG pattern with the
correct number of output operands.
This commit extends TableGen to alternatively allow match a complex
operands against multiple separate operands at the DAG level.
This allows using Pat patterns to match pre-increment nodes like
pre_store (which must have separate operands at the DAG level) onto
an instruction pattern that uses a multi-operand memory operand,
like the following example on PowerPC (will be committed as a
follow-on patch):
def STWU : DForm_1<37, (outs ptr_rc:$ea_res), (ins GPRC:$rS, memri:$dst),
"stwu $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def : Pat<(pre_store GPRC:$rS, ptr_rc:$ptrreg, iaddroff:$ptroff),
(STWU GPRC:$rS, iaddroff:$ptroff, ptr_rc:$ptrreg)>;
Here, the pair of "ptroff" and "ptrreg" operands is matched onto the
complex operand "dst" of class "memri" in the "STWU" instruction.
Approved by Jakob Stoklund Olesen.
llvm-svn: 177428
These are two related changes (one in llvm, one in clang).
LLVM:
- rename address_safety => sanitize_address (the enum value is the same, so we preserve binary compatibility with old bitcode)
- rename thread_safety => sanitize_thread
- rename no_uninitialized_checks -> sanitize_memory
CLANG:
- add __attribute__((no_sanitize_address)) as a synonym for __attribute__((no_address_safety_analysis))
- add __attribute__((no_sanitize_thread))
- add __attribute__((no_sanitize_memory))
for S in address thread memory
If -fsanitize=S is present and __attribute__((no_sanitize_S)) is not
set llvm attribute sanitize_S
llvm-svn: 176075
The 'nobuiltin' attribute is applied to call sites to indicate that LLVM should
not treat the callee function as a built-in function. I.e., it shouldn't try to
replace that function with different code.
llvm-svn: 175835
This is based on Bill Wendling's email. No additional content has been added,
but now there's a place for Attributes to capture future information.
llvm-svn: 174961
This updates the current references to links that work for me.
In the future, we should update the list of references itself to provide
information on newer architecture variants.
Thanks to Sean Silva for pointing out that the current links were broken!
llvm-svn: 174739
Attribute groups are of the form:
#0 = attributes { noinline "no-sse" "cpu"="cortex-a8" alignstack=4 }
Target-dependent attributes are represented as strings. Attributes can have
optional values associated with them. E.g., the "cpu" attribute has the value
"cortex-a8".
Target-independent attributes are listed as enums inside the attribute classes.
Multiple attribute groups can be referenced by the same object. In that case,
the attributes are merged together.
llvm-svn: 174493
Makefile.config.
This is implied at the bottom of the help text of configure (besides
CC/CXX/LDFLAGS, already passed to Makefile.config).
For backward compatibility, the values of CFLAGS and CXXFLAGS defaults
to empty, overriding the default values provided by autoconf (for
example, '-g -O2' when CC=gcc').
$(CPP) is not used by our makefiles. Therefore, the value of CPP is
not passed to Makefile.config, despite beeing mentioned by 'configure
--help'.
llvm-svn: 174313
GlobalVariable about LLVM's assumptions vis-a-vis Global Variable
initial values and Global Variable initializers.
This is in preparation for adding the new keyword
externally_initialized.
Specifically, the patch explains how LLVM optimizes global initializers
by assumign that global variables defined within the module are not
modified from their initial values before the start of the global
initializer.
llvm-svn: 174269
My "excuse" for not refactoring the grammar here is to not diverge too
far from the grammar in the comments of TGParser.cpp, since I'm not
taking on the quest of majorly refactoring TGParser.cpp at the moment.
One benefit of doing this is that Ideas for refactoring and clarifying
the grammar in this document should translate almost immediately to
beneficial refactorings that can be made to TGParser.cpp.
llvm-svn: 174144
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
llvm-svn: 174054
prevent an llvm developer from mistakenly thinking that just because the
intrinsic has volatile flags that volatile operations can be converted
to or folded into them.
Platforms may rely on volatile loads and stores of natively supported
data width to be executed as single instruction. When compiling
C, this expectation likely holds for l-values of volatile primitive
types with native hardware support, but not necessarily for aggregate
types. The frontend upholds these expectations, which are not
specified in the IR.
llvm-svn: 173974
The requirements of the strong heuristic are:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
llvm-svn: 173231
SSPStrong applies a heuristic to insert stack protectors in these situations:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
This patch implements the SSPString attribute to be equivalent to
SSPRequired. This will change in a subsequent patch.
llvm-svn: 173230
This change also removes a bunch of boilerplate and stuffing which made
it unnecessarily hard to navigate and see the comparatively miniscule
actual content that was added to this document during the 3.2
development period (or maybe even sticking around from earlier
releases...).
The new organization (a flat list) optimizes for making it easy for
people who know about changes to add them to the document. It's
completely trivial for anyone with basic knowledge of LLVM to come in
later (such as when preparing for the actual release) and cluster any
changes into logical groups. However, I have left some comments
indicating how to add larger descriptions, if someone is feeling
adventurous ;)
Hopefully this organization will highlight how little effort is being
put into producing accurate, high-quality release notes, prompting a
corresponding improvement for the 3.3 release.
I have preserved the changes to this document that are not present
in the 3.2 release notes. There were only two... I'm pretty sure we've
been busier than that... (version control shows +213347/-173656 raw
lines just in the LLVM repo since the 3.2 release).
llvm-svn: 172954
grep is now only mentioned once in a sentence that explicitly says it's
deprecated. For FileCheck, there's no reason to repeat part of the
documentation that exists in CommandGuide/FileCheck.
llvm-svn: 172835
- This code is dead, and the "right" way to get this support is to use the
platform-specific linker-integrated LTO mechanisms, or the forthcoming LLVM
linker.
llvm-svn: 172749
Before we learned about :doc:, we used :ref: and put a dummy link at the
top of each page. Don't do that anymore.
This fixes PR14891 as a special case.
llvm-svn: 172162
Similarly inlining of the function is inhibited, if that would duplicate the call (in particular inlining is still allowed when there is only one callsite and the function has internal linkage).
llvm-svn: 170704
This is a pretty lengthy document, so put the table of contents in your
face so that it's easier to scope out the content.
This document is a mess currently and needs to be
refactored/revised/split-up.
llvm-svn: 170646
For whatever reason the usage of '^^^' and '---' adornments were
reversed compared to the "canonical" style of the LLVM docs (which is
currently "the style used in SphinxQuickstartTemplate.rst"). This change
doesn't affect the document structure at all, I'm just doing it for
trivial stylistic consistency (the document content is *much* more
important---thanks Nadav for writing this up!).
Also, trim the adornments to be the same length as the section names.
llvm-svn: 170638
Building Vectorizers.rst produces a few warnings of the form:
WARNING: Title underline too short.
Fixed by adding the extra needed dashes under the title.
llvm-svn: 170582
structures to and from YAML using traits. The first client will
be the test suite of lld. The documentation will show up at:
http://llvm.org/docs/YamlIO.html
llvm-svn: 170019
Since now we have an autogenerated TOC, a manually written table of all passes
was removed.
Patch by Anthony Mykhailenko with small fixes by me.
llvm-svn: 169867
NOTE: If you have any patches in the works that modify LangRef, you will
need to rewrite the changes to LangRef.html to their equivalents in
LangRef.rst. If you need assistance feel free to contact me.
Since LangRef is mission-critical for the project and "normative", I
have taken extra care to ensure that no content was lost or altered in
the conversion. The content was converted with a tool called `pandoc`,
so there is no chance for a human error like accidentally forgetting a
sentence or whatever. After the initial conversion by `pandoc`, only
changes to the markup were done.
This is just the most literal conversion of the HTML document as
possible. It might be worth exploring some way to chop up this massive
document into separate pages, e.g. something like
`docs/LangRef/Instructions.rst`, `docs/LangRef/Intrinsics.rst`, etc.
with `docs/LangRef.rst` being an "intro/navigation page" of sorts. On
the other hand, that loses the ability to {Ctrl,Cmd}-F for a given term
right from your browser.
IMO, I think our stylesheet needs some work because I find it hard to
tell what level of nesting some of the headings are at (e.g. "is this a
new section or is it a subsection?"). The issue is present on other
pages, but the sheer size and deep section structure of LangRef really
brings this issue out. If there are any web designers out there in the
community it would be awesome if you tried to come up with something
nicer.
llvm-svn: 169596
Sorry for the massive commit, but I just wanted to knock this one down
and it is really straightforward.
There are still a couple trivial (i.e. not related to the content)
things left to fix:
- Use of raw HTML links where :doc:`...` and :ref:`...` could be used
instead. If you are a newbie and want to help fix this it would make
for some good bite-sized patches; more experienced developers should
be focusing on adding new content (to this tutorial or elsewhere, but
please _do not_ waste your time on formatting when there is such dire
need for documentation (see docs/SphinxQuickstartTemplate.rst to get
started writing)).
- Highlighting of the kaleidoscope code blocks (currently left as bare
`::`). I will be working on writing a custom Pygments highlighter for
this, mostly as training for maintaining the `llvm` code-block's lexer
in-tree. I want to do this because I am extremely unhappy with how it
just "gives up" on the slightest deviation from the expected syntax
and leaves the whole code-block un-highlighted.
More generally I am looking at writing some Sphinx extensions and
keeping them in-tree as well, to support common use cases that
currently have no good solution (like "monospace text inside a link").
llvm-svn: 169343
Fixes PR14380.
The prose was referring to a "bold" part of the code example, where the
boldness was lost in the transition from HTML. Unlike HTML, where one
can easily have a <b> inside a <pre>, reStructuredText is generally
unable to represent such nested markup.
Hack around it with the :emphasise-lines: option to the code-block
directive to single out the regions instead. Thankfully the regions are
close-enough to being full lines for this to work.
llvm-svn: 168329
Previously in a vector of pointers, the pointer couldn't be any pointer type,
it had to be a pointer to an integer or floating point type. This is a hassle
for dragonegg because the GCC vectorizer happily produces vectors of pointers
where the pointer is a pointer to a struct or whatever. Vector getelementptr
was restricted to just one index, but now that vectors of pointers can have
any pointer type it is more natural to allow arbitrary vector getelementptrs.
There is however the issue of struct GEPs, where if each lane chose different
struct fields then from that point on each lane will be working down into
unrelated types. This seems like too much pain for too little gain, so when
you have a vector struct index all the elements are required to be the same.
llvm-svn: 167828
offer up my email to the spam lords for it. Hopefully this will
eventually be more automatic, but we don't want people to think there is
only one option.
llvm-svn: 166870
Relationship maps are represented as InstrMapping records which are parsed by
TableGen and the information is used to construct mapping tables to represent
appropriate relations between instructions. These tables are emitted into
XXXGenInstrInfo.inc file along with the functions to query them.
Patch by Jyotsna Verma <jverma@codeaurora.org>.
llvm-svn: 166685
obvious stuff and most new code being committed conforms to that. Some old
code does not; this might cause confusion and this is the motivation to
document the correct guidelines.
llvm-svn: 166378
The intent of this document is to be the go-to document for anybody who
wants to write new documentation, but isn't familiar with Sphinx.
llvm-svn: 165775
* Fix confusing explanation regarding abstract classes.
* Clarify auto-upcasting and why `Shape` doesn't need a `classof()`.
* Add section `Rules of Thumb` with some quick summary tips.
llvm-svn: 165768
Recent changes to isa<>/dyn_cast<> have made unnecessary those classof()
of the form:
static bool classof(const Foo *) { return true; }
Accordingly, remove mention of such classof() from the documentation.
llvm-svn: 165766
Hypothesis 1: use of `.. code::` directive instead of `.. code-block::`
is causing Sphinx to discard the block. On my machine, `.. code::`
renders fine. However, I don't think that `.. code::` is actually a
legit Sphinx directive. I believe that on my machine Sphinx is falling
back to just displaying it monospace with no syntax, whereas llvm.org's
Sphinx is just discarding it.
This is truly "remote debugging" since I can't reproduce this on my
machine. It would be helpful to be able to see the llvm.org Sphinx
build logs; if that's possible please let me know.
llvm-svn: 165632
This document describes how to set up LLVM-style RTTI for a class
hierarchy. Surprisingly, this was not previously documented.
Also, link it into ProgrammersManual.html.
llvm-svn: 165293
make it more consistent with its intended semantics.
The `linker_private_weak_def_auto' linkage type was meant to automatically hide
globals which never had their addresses taken. It has nothing to do with the
`linker_private' linkage type, which outputs the symbols with a `l' (ell) prefix
among other things.
The intended semantic is more like the `linkonce_odr' linkage type.
Change the name of the linkage type to `linkonce_odr_auto_hide'. And therefore
changing the semantics so that it produces the correct output for the linker.
Note: The old linkage name `linker_private_weak_def_auto' will still parse but
is not a synonym for `linkonce_odr_auto_hide'. This should be removed in 4.0.
<rdar://problem/11754934>
llvm-svn: 162114
This new attribute is intended to be used by the backend to determine how
the inline asm string should be parsed/printed. This patch adds the
ia_nsdialect attribute and also adds a test case to ensure the IR is
correctly parsed, but there is no functional change at this time.
The standard dialect is assumed to be AT&T. Therefore, this attribute
should only be added to MS-style inline assembly statements, which use
the Intel dialect. If we ever support more dialects we'll need to
add additional state to the attribute.
llvm-svn: 161641
yaml2obj takes a textual description of an object file in YAML format
and outputs the binary equivalent. This greatly simplifies writing
tests that take binary object files as input.
llvm-svn: 161205
hopefully make it more visible. Adjust the web-docs to have a link to
this file rather than the list itself. I described code owners as also
being gatekeepers for their part of the code, which I think is true but
isn't in the code owner explanation on the web page.
llvm-svn: 160776
This was always part of the VMCore library out of necessity -- it deals
entirely in the IR. The .cpp file in fact was already part of the VMCore
library. This is just a mechanical move.
I've tried to go through and re-apply the coding standard's preferred
header sort, but at 40-ish files, I may have gotten some wrong. Please
let me know if so.
I'll be committing the corresponding updates to Clang and Polly, and
Duncan has DragonEgg.
Thanks to Bill and Eric for giving the green light for this bit of cleanup.
llvm-svn: 159421
This allows the user/front-end to specify a model that is better
than what LLVM would choose by default. For example, a variable
might be declared as
@x = thread_local(initialexec) global i32 42
if it will not be used in a shared library that is dlopen'ed.
If the specified model isn't supported by the target, or if LLVM can
make a better choice, a different model may be used.
llvm-svn: 159077
Original commit msg:
add the 'alloc' metadata node to represent the size of offset of buffers pointed to by pointers.
This metadata can be attached to any instruction returning a pointer
llvm-svn: 158688
expression (a * b + c) that can be implemented as a fused multiply-add (fma)
if the target determines that this will be more efficient. This intrinsic
will be used to implement FP_CONTRACT support and an aggressive FMA formation
mode.
If your target has a fast FMA instruction you should override the
isFMAFasterThanMulAndAdd method in TargetLowering to return true.
llvm-svn: 158014
These functions exposed the layout of the underlying data tables as
null-terminated uint16_t arrays.
Use the new MCSubRegIterator, MCSuperRegIterator, and MCRegAliasIterator
classes instead.
llvm-svn: 157855
be non contiguous, non overlapping and sorted by the lower end.
While this is technically a backward incompatibility, every frontent currently
produces range metadata with a single interval and we don't have any pass
that merges intervals yet, so no existing bitcode files should be rejected by
this.
llvm-svn: 157741
- Currently this leaves us with less build system support (e.g., installing man pages) for the docs than is desired. I'm working on fixing this, but it may take a while. If someone finds this particularly egregious let me know and I will prioritize it.
llvm-svn: 156389
While making lld build under the tools directory I decided to refactor how this
works.
There is now a macro, add_llvm_external_project, which takes the name of the
expected subdirectory. This sets up two CMake options.
* LLVM_EXTERNAL_${NAME}_SOURCE_DIR
This is the path to the source. It defaults to
${CMAKE_CURRENT_SOURCE_DIR}/${name}.
* LLVM_EXTERNAL_${NAME}_BUILD
Enable and disable building the tool as part of LLVM.
I chose LLVM_EXTERNAL_${NAME} as a prefix so they all show up together in the
GUI.
llvm-svn: 155654
- FlatArrayMap. Very simple map container that uses flat array inside.
- MultiImplMap. Map container interface, that has two modes, one for small amount of elements and one for big amount.
- SmallMap. SmallMap is DenseMap compatible MultiImplMap. It uses FlatArrayMap for small mode, and DenseMap for big mode.
Also added unittests for new classes and update for ProgrammersManual.
For more details about new classes see ProgrammersManual and comments in sourcecode.
llvm-svn: 155557
llvm-ld is no longer useful and causes confusion and so it is being removed.
* Does not work very well on Windows because it must call a gcc like driver to
assemble and link.
* Has lots of hard coded paths which are wrong on many systems.
* Does not understand most of ld's options.
* Can be partially replaced by llvm-link | opt | {llc | as, llc -filetype=obj} |
ld, or fully replaced by Clang.
I know of no production use of llvm-ld, and hacking use should be
replaced by Clang's driver.
llvm-svn: 155147
- Work in progress, this is mostly important because it lets us incrementally migrate the remaining documentation.
- Lots of styling, editing, and integration work yet to come…
- PR12589
llvm-svn: 155133
through the use of 'fpmath' metadata. Currently this only provides a 'fpaccuracy'
value, which may be a number in ULPs or the keyword 'fast', however the intent is
that this will be extended with additional information about NaN's, infinities
etc later. No optimizations have been hooked up to this so far.
llvm-svn: 154822
thinking of generalizing it to be able to specify other freedoms beyond accuracy
(such as that NaN's don't have to be respected). I'd like the 3.1 release (the
first one with this metadata) to have the more generic name already rather than
having to auto-upgrade it in 3.2.
llvm-svn: 154744
Cygwin-1.7 supports dw2. Some recent mingw distros support one, too.
I have confirmed test-suite/SingleSource/Benchmarks/Shootout-C++/except.cpp can pass on Cygwin.
llvm-svn: 154247
brace) so that we get more accurate line number information about the
declaration of a given function and the line where the function
first starts.
Part of rdar://11026482
llvm-svn: 153916
* Removed test/lib/llvm.exp - it is no longer needed
* Deleted the dg.exp reading code from test/lit.cfg. There are no dg.exp files
left in the test suite so this code is no longer required. test/lit.cfg is
now much shorter and clearer
* Removed a lot of duplicate code in lit.local.cfg files that need access to
the root configuration, by adding a "root" attribute to the TestingConfig
object. This attribute is dynamically computed to provide the same
information as was previously provided by the custom getRoot functions.
* Documented the config.root attribute in docs/CommandGuide/lit.pod
llvm-svn: 153408
Also refactor the existing OProfile profiling code to reuse the same interfaces with the VTune profiling code.
In addition, unit tests for the profiling interfaces were added.
This patch was prepared by Andrew Kaylor and Daniel Malea, and reviewed in the llvm-commits list by Jim Grosbach
llvm-svn: 152620
Add some data structures to represent for loops. These will be
referenced during object processing to do any needed iteration and
instantiation.
Add foreach keyword support to the lexer.
Add a mode to indicate that we're parsing a foreach loop. This allows
the value parser to early-out when processing the foreach value list.
Add a routine to parse foreach iteration declarations. This is
separate from ParseDeclaration because the type of the named value
(the iterator) doesn't match the type of the initializer value (the
value list). It also needs to add two values to the foreach record:
the iterator and the value list.
Add parsing support for foreach.
Add the code to process foreach loops and create defs based
on iterator values.
Allow foreach loops to be matched at the top level.
When parsing an IDValue check if it is a foreach loop iterator for one
of the active loops. If so, return a VarInit for it.
Add Emacs keyword support for foreach.
Add VIM keyword support for foreach.
Add tests to check foreach operation.
Add TableGen documentation for foreach.
Support foreach with multiple objects.
Support non-braced foreach body with one object.
Do not require types for the foreach declaration. Assume the iterator
type from the iteration list element type.
llvm-svn: 151164
For objects that can be identified by small unsigned keys, SparseSet
provides constant time clear() and fast deterministic iteration. Insert,
erase, and find operations are typically faster than hash tables.
SparseSet is useful for keeping information about physical registers,
virtual registers, or numbered basic blocks.
llvm-svn: 151110
Clarify that contributors are agreeing to license their code under the
license corresponding to the subproject that they are contributing to,
as requested by a potential contributor.
Also, as a drive-by, update the llvm-gcc/GPL section to mention dragonegg
and say that GPL code is all in its own repo's.
llvm-svn: 150065
This is the initial checkin of the basic-block autovectorization pass along with some supporting vectorization infrastructure.
Special thanks to everyone who helped review this code over the last several months (especially Tobias Grosser).
llvm-svn: 149468
Problem: LLVM needs more function attributes than currently available (32 bits).
One such proposed attribute is "address_safety", which shows that a function is being checked for address safety (by AddressSanitizer, SAFECode, etc).
Solution:
- extend the Attributes from 32 bits to 64-bits
- wrap the object into a class so that unsigned is never erroneously used instead
- change "unsigned" to "Attributes" throughout the code, including one place in clang.
- the class has no "operator uint64 ()", but it has "uint64_t Raw() " to support packing/unpacking.
- the class has "safe operator bool()" to support the common idiom: if (Attributes attr = getAttrs()) useAttrs(attr);
- The CTOR from uint64_t is marked explicit, so I had to add a few explicit CTOR calls
- Add the new attribute "address_safety". Doing it in the same commit to check that attributes beyond first 32 bits actually work.
- Some of the functions from the Attribute namespace are worth moving inside the class, but I'd prefer to have it as a separate commit.
Tested:
"make check" on Linux (32-bit and 64-bit) and Mac (10.6)
built/run spec CPU 2006 on Linux with clang -O2.
This change will break clang build in lib/CodeGen/CGCall.cpp.
The following patch will fix it.
llvm-svn: 148553
Register masks will be used as a compact representation of large clobber
lists. Currently, an x86 call instruction has some 40 operands
representing call-clobbered registers. That's more than 1kB of useless
operands per call site.
A register mask operand references a bit mask of call-preserved
registers, everything else is clobbered. The bit mask will typically
come from TargetRegisterInfo::getCallPreservedMask().
By abandoning ImplicitDefs for call-clobbered registers, it also becomes
possible to share call instruction descriptions between calling
conventions, and we can get rid of the WINCALL* instructions.
This patch introduces the new operand kind. Future patches will add
RegMask support to target-independent passes before finally the fixed
clobber lists can be removed from call instruction descriptions.
llvm-svn: 148250
The registers are placed into the saved registers list in the reverse order,
which is why the original loop was written to loop backwards.
llvm-svn: 148064
The register allocators don't currently support adding reserved
registers while they are running. Extend the MRI API to keep track of
the set of reserved registers when register allocation started.
Target hooks like hasFP() and needsStackRealignment() can look at this
set to avoid reserving more registers during register allocation.
llvm-svn: 147577
The command line option should be removed, but not until the feature has
gotten a lot of testing. The ARMConstantIslandPass tends to have subtle
bugs that only show up after a while.
llvm-svn: 146739
the behavior with the newly added flag for undefined results on a zero
input.
I'm terrible at documentation, so comments and suggestions welcome here.
llvm-svn: 146361
recent discussions. Poison can't make every value that depends on
it act in maximally undefined ways, because the optimizer may still
hoist code following the usual rules for undef. Make Poison invoke
its full undefined behavior only when it reaches an instruction with
externally visible side effects.
llvm-svn: 145913
I suspect we could profitably remove/move some of the bullet points
under Clang here to the Clang notes in order to keep things clean on
both sides. Unless I hear objections I'll start doing that once folks
have read over the Clang notes a bit.
llvm-svn: 145340
compile and use a bunch of stuff using o32 abi). Also the rt-rk.com team
claims that the JIT support they contributed, is complete for the mips
"static" relocation model.
llvm-svn: 142950
file. Since it should only be used when necessary propagate it through
the backend code generation and tweak testcases accordingly.
This helps with code like in clang's test/CodeGen/debug-info-line.c where
we have multiple #line directives within a single lexical block and want
to generate only a single block that contains each file change.
Part of rdar://10246360
llvm-svn: 141729
promoting allocas to preferred alignments that exceed the natural
alignment. This avoids some potentially expensive dynamic stack realignments.
The natural stack alignment is set in target data strings via the "S<size>"
option. Size is in bits and must be a multiple of 8. The natural stack alignment
defaults to "unspecified" (represented by a zero value), and the "unspecified"
value does not prevent any alignment promotions. Target maintainers that care
about avoiding promotions should explicitly add the "S<size>" option to their
target data strings.
llvm-svn: 141599
Multidefs are a bit unwieldy and incomplete. Remove them in favor of
another mechanism, probably for loops.
Revert "Make Test More Thorough"
Revert "Fix a typo."
Revert "Vim Support for Multidefs"
Revert "Emacs Support for Multidefs"
Revert "Document Multidefs"
Revert "Add a Multidef Test"
Revert "Update Test for Multidefs"
Revert "Process Multidefs"
Revert "Parser Multidef Support"
Revert "Lexer Support for Multidefs"
Revert "Add Multidef Data Structures"
llvm-svn: 141378
This basically involved removing references to llvm.eh.exception,
llvm.eh.selector, and llvm.eh.resume and replacing them with references to the
landingpad and resume instructions.
llvm-svn: 140128
init.trampoline and adjust.trampoline intrinsics, into two intrinsics
like in GCC. While having one combined intrinsic is tempting, it is
not natural because typically the trampoline initialization needs to
be done in one function, and the result of adjust trampoline is needed
in a different (nested) function. To get around this llvm-gcc hacks the
nested function lowering code to insert an additional parent variable
holding the adjust.trampoline result that can be accessed from the child
function. Dragonegg doesn't have the luxury of tweaking GCC code, so it
stored the result of adjust.trampoline in the memory GCC set aside for
the trampoline itself (this is always available in the child function),
and set up some new memory (using an alloca) to hold the trampoline.
Unfortunately this breaks Go which allocates trampoline memory on the
heap and wants to use it even after the parent has exited (!). Rather
than doing even more hacks to get Go working, it seemed best to just use
two intrinsics like in GCC. Patch mostly by Sanjoy Das.
llvm-svn: 139140
MDNodes graph structure such that compiler unit keeps track of important MDNodes and update dwarf writer to process mdnodes top-down instead of bottom up.
llvm-svn: 137778
of the instruction.
Note that this change affects the existing non-atomic load and store
instructions; the parser now accepts both forms, and the change is noted
in the release notes.
llvm-svn: 137527
This implements the 'landingpad' instruction. It's used to indicate that a basic
block is a landing pad. There are several restrictions on its use (see
LangRef.html for more detail). These restrictions allow the exception handling
code to gather the information it needs in a much more sane way.
This patch has the definition, implementation, C interface, parsing, and bitcode
support in it.
llvm-svn: 137501
Sean Silva