Add support for the COFF relocation types IMAGE_REL_I386_DIR32NB and
IMAGE_REL_AMD64_ADDR32NB for 32- and 64-bit respectively. These are
similar to normal 4-byte relocations except that they do not include
the base address of the image.
Image-relative relocations are used for debug information (32-bit) and
SEH unwind tables (64-bit).
A new MCSymbolRef variant called 'VK_COFF_IMGREL32' is introduced to
specify such relocations. For AT&T assembly, this variant can be accessed
using the symbol suffix '@imgrel'.
llvm-svn: 179240
Compact unwind has an encoding for when we're not able to generate compact
unwind and must generate an EH frame instead. Track that, but still emit that CU
encoding.
llvm-svn: 179220
Test cases that regressed due to r179115, plus a few more, were added in
r179182. Original commit message below:
[ms-inline asm] Use parsePrimaryExpr in lieu of parseExpression if we need to
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
Part of rdar://13611297
llvm-svn: 179187
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
The existing test cases exercise this patch.
rdar://13611297
llvm-svn: 179115
rather than deriving the StringRef from the Start and End SMLocs.
Using the Start and End SMLocs works fine for operands such as [Symbol], but
not for operands such as [Symbol + ImmDisp]. All existing test cases that
reference a variable exercise this patch.
rdar://13602265
llvm-svn: 179109
This finally fixes the encoding. The patch also
* Removes eh-frame.ll. It was an unnecessary .ll to .o test that was checking
the wrong value.
* Merge fde-reloc.s and eh-frame.s into a single test, since the only difference
was the run lines.
* Don't blindly test the content of the entire .eh_frame section. It makes it
hard to anyone actually fixing a bug and hitting a difference in a binary
blob. Instead, use a CHECK for each field and document what is being checked.
llvm-svn: 178615
Revision 177141 caused a regression in all but
mips64 little endian. That is because none of the
other Mips targets had test cases checking the
contents of the .eh_frame section. This patch fixes
both the llvm code and adds an assembler test case
to include the current 4 flavors.
The test cases unfortunately rely on llvm-objdump. A
preferable method would be to use a pretty printer output
such as what readelf -wf <elf_file> would give.
I also changed the name of the test case to correct a typo.
llvm-svn: 178506
'@SECREL' is what is used by the Microsoft assembler, but GNU as expects '@SECREL32'.
With the patch, the MC-generated code works fine in combination with a recent GNU as (2.23.51.20120920 here).
Patch by David Nadlinger!
Differential Revision: http://llvm-reviews.chandlerc.com/D429
llvm-svn: 178427
added back in by X86AsmPrinter::printIntelMemReference() during codegen.
Previously, this following example
void t() {
int i;
__asm mov eax, [i]
}
would generate the below assembly
mov eax, dword ptr [[eax]]
which resulted in a fatal error when compiling. Test case coming on the
clang side.
rdar://13444264
llvm-svn: 177440
This is a very late complement to r130637 which fixed this on x86_64. Fixes
pr15448.
Since it looks like that every elf architecture uses this encoding when using
cfi, make it the default for elf. Just exclude mips64el. It has a lovely
.ll -> .o test (ef_frame.ll) that tests that nothing changes in the binary
content of the .eh_frame produced by llc. Oblige it.
llvm-svn: 177141
return 0 to indicate failure to create the disassembler. A library routine
should not assert and just let the caller handler the error. For example
darwin's otool(1) will simply print an error if it ends up using a library
that is not configured for a target it wants:
% otool -tv ViewController.o
ViewController.o:
(__TEXT,__text) section
can't create arm llvm disassembler
This is much better than an abort which appears as a crash to the user or
even the assert when using a Debug+Asserts built library:
Assertion failed: (MAI && "Unable to create target asm info!"), function LLVMCreateDisasmCPU, file /Volumes/SandBox/llvm/lib/MC/MCDisassembler/Disassembler.cpp, line 47.
radr://12539918
llvm-svn: 176880
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
llvm-svn: 176605
For integer constants, allow 'L', 'UL' as well as 'ULL' and 'LL'. This provides
better support for shared headers between .s and .c files that define bunches
of constant values.
rdar://9321056
llvm-svn: 176118
The PowerPC TLS relocation types were not previously added to the
necessary list in MCELFStreamer::fixSymbolsInTLSFixups(). Now they are!
llvm-svn: 176094
excluding visibility bits.
Generic STO handling at the Target level.
The st_other field of the ELF symbol table is one
byte in size. The first 2 bytes are used for generic
visibility and are currently handled by llvm.
The other six bits are processor specific and need
to be set at the target level.
A couple of notes:
The new static methods for accessing and setting the "other"
flags in include/llvm/MC/MCELF.h match the style guide
and not the other methods in the file. I don't like the
inconsistency, but feel I should follow the prescribed
lowerUpper() convention.
STO_ value definitions are not specified in gnu land as
consistently as the STT_ and STB_ fields. Probably because
the latter were defined in a standards doc and the former
defined partially in code. I have stuck with the full byte
definition of the flags.
Contributer: Zoran Jovanovic
llvm-svn: 175561
GNU as rejects them and there are configure scripts in the wild that check if
the assembler rejects ".align 3" to determine whether the alignment is in bytes
or powers of two.
llvm-svn: 175360
Input/Output rewrite to the same location. Make sure the SizeDirective rewrite
is performed first. This also ensure the sort algorithm is stable.
llvm-svn: 175317
With bundle alignment, instructions all get their own MCFragments
(unless they are in a bundle-locked group). For instructions with
fixups, this is an MCDataFragment. Emitting actual data (e.g. for
.long) attempts to re-use MCDataFragments, which we don't want int
this case since it leads to fragments which exceed the bundle size.
So, don't reuse them in this case.
Also adds a test and fixes some formatting.
llvm-svn: 175316
This is complicated by backward labels (e.g., 0b can be both a backward label
and a binary zero). The current implementation assumes [0-9]b is always a
label and thus it's possible for 0b and 1b to not be interpreted correctly for
ms-style inline assembly. However, this is relatively simple to fix in the
inline assembly (i.e., drop the [bB]).
This patch also limits backward labels to [0-9]b, so that only 0b and 1b are
ambiguous.
Part of rdar://12470373
llvm-svn: 174983
I have some uncommitted changes to the cast code that catch this sort of thing
at compile-time but I still need to do some other cleanup before I can enable
it.
llvm-svn: 174853
Currently, when a fragment is relaxed, its size is modified, but its
offset is not (it gets laid out as a side effect of checking whether
it needs relaxation), then all subsequent fragments are invalidated
because their offsets need to change. When bundling is enabled,
relaxed fragments need to get laid out again, because the increase in
size may push it over a bundle boundary. So instead of only
invalidating subsequent fragments, also invalidate the fragment that
gets relaxed, which causes it to get laid out again.
This patch also fixes some trailing whitespace and fixes the
bundling-related debug output of MCFragments.
llvm-svn: 174401
isa<> and dyn_cast<>. In several places, code is already hacking around
the absence of this, and there seem to be several interfaces that might
be lifted and/or devirtualized using this.
This change was based on a discussion with Jim Grosbach about how best
to handle testing for specific MCStreamer subclasses. He said that this
was the correct end state, and everything else was too hacky so
I decided to just make it so.
No functionality should be changed here, this is just threading the kind
through all the constructors and setting up the classof overloads.
llvm-svn: 174113
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
llvm-svn: 174054
and update ELF header e_flags.
Currently gathering information such as symbol,
section and data is done by collecting it in an
MCAssembler object. From MCAssembler and MCAsmLayout
objects ELFObjectWriter::WriteObject() forms and
streams out the ELF object file.
This patch just adds a few members to the MCAssember
class to store and access the e_flag settings. It
allows for runtime additions to the e_flag by
assembler directives. The standalone assembler can
get to MCAssembler from getParser().getStreamer().getAssembler().
This patch is the generic infrastructure and will be
followed by patches for ARM and Mips for their target
specific use.
Contributer: Jack Carter
llvm-svn: 173882
the body does not use them and it appears the body has positional parameters.
This can cause unexpected results as in the added test case. As the darwin
version of gas(1) which only supported positional parameters, happened to
ignore the named parameters. Now that we want to support both styles of
macros we issue a warning in this specific case.
rdar://12861644
llvm-svn: 173199
Add the x32 environment kind to the triple, and separate the concept of
pointer size and callee save stack slot size, since they're not equal
on x32.
llvm-svn: 173175
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Support for Mips register information sections.
Mips ELF object files have a section that is dedicated
to register use info. Some of this information such as
the assumed Global Pointer value is used by the linker
in relocation resolution.
The register info file is .reginfo in o32 and .MIPS.options
in 64 and n32 abi files.
This patch contains the changes needed to create the sections,
but leaves the actual register accounting for a future patch.
Contributer: Jack Carter
llvm-svn: 172847
AT_producer. Which includes clang's version information so we can tell
which version of the compiler was used.
This is the first of two steps to allow us to do that. This is the llvm-mc
change to provide a method to set the AT_producer string. The second step,
coming soon to a clang near you, will have the clang driver pass the value
of getClangFullVersion() via an flag when invoking the integrated assembler
on assembly source files.
rdar://12955296
llvm-svn: 172630
using the DW_FORM_GNU_addr_index and a separate .debug_addr section which
stays in the executable and is fully linked.
Sneak in two other small changes:
a) Print out the debug_str_offsets.dwo section.
b) Change form we're expecting the entries in the debug_str_offsets.dwo
section to take from ULEB128 to U32.
Add tests for all of this in the fission-cu.ll test.
llvm-svn: 172578
into which we can emit single instructions without fixups (which is most
instructions). This is an optimization required because MCDataFragment
is prety large (240 bytes on x64), with no change in functionality.
For large programs, this reduces memory usage overhead required for bundling
by 40%.
To make the code as palatable as possible, the MCEncodedFragment interface was
further fragmented (no pun intended) and MCEncodedFragmentWithFixups is used
as the interface to work against when the user expects fixups. MCDataFragment
and MCRelaxableFragment implement this interface, while the new
MCCompactEncodedInstFragment implements MCEncodeFragment.
llvm-svn: 172572
// FIXME: Constraints are hard coded to 'm', but we need an 'r'
// constraint for addressof. This needs to be cleaned up!
Test cases are already in place. Specifically,
clang/test/CodeGen/ms-inline-asm.c t15(), t16(), and t24().
llvm-svn: 172569
After discussing the refactoring with Jim and Daniel, the following changes were
made:
* All generic directive parsing is now done by AsmParser itself. The previous
division between it and GenericAsmParser did not have clear boundaries and
just produced unnatural code of GenericAsmParser juggling the internals of
AsmParser through an interface.
The division of responsibilities is now clear: target-specific directives,
other extensions (used by platform-specific parseres), and generic directives.
* Priority for directive parsing was reshuffled to ask extensions first and
check the generic directives later.
No change in functionality.
llvm-svn: 172568
simply use the getParser method from MCAsmParserExtension, working through the
MCAsmParser interface. There's no longer a need to overload that method to
cast it to the concrete AsmParser.
llvm-svn: 172491
This finally allows AsmParser to no longer list GenericAsmParser as a friend.
All member vars directly accessed by GenericAsmParser have been properly
encapsulated and exposed through the MCAsmParser interface. This reduces the
coupling between AsmParser and GenericAsmParser.
llvm-svn: 172490
Now that it behaves itself in terms of streamer independence (r172450), this
method can be moved to MCAsmParser to be available to all extensions,
overriding, etc.
-- -This line, and those below, will be ignored--
M lib/MC/MCParser/AsmParser.cpp
M include/llvm/MC/MCParser/MCAsmParser.h
llvm-svn: 172451
The aim of this patch is to fix the following piece of code in the
platform-independent AsmParser:
void AsmParser::CheckForValidSection() {
if (!ParsingInlineAsm && !getStreamer().getCurrentSection()) {
TokError("expected section directive before assembly directive");
Out.SwitchSection(Ctx.getMachOSection(
"__TEXT", "__text",
MCSectionMachO::S_ATTR_PURE_INSTRUCTIONS,
0, SectionKind::getText()));
}
}
This was added for the "-n" option of llvm-mc.
The proposed fix adds another virtual method to MCStreamer, called
InitToTextSection. Conceptually, it's similar to the existing
InitSections which initializes all common sections and switches to
text. The new method is implemented by each platform streamer in a way
that it sees fit. So AsmParser can now do this:
void AsmParser::CheckForValidSection() {
if (!ParsingInlineAsm && !getStreamer().getCurrentSection()) {
TokError("expected section directive before assembly directive");
Out.InitToTextSection();
}
}
Which is much more reasonable.
llvm-svn: 172450
Since it's used by extensions. One further step to fully decoupling
GenericAsmParser from an intimate knowledge of the internals of AsmParser,
pointing it to the MCASmParser interface instead (like all other parser
extensions do).
Since this change moves the MacroArgument type to the interface header, it's
renamed to be a bit more descriptive in a general context.
llvm-svn: 172449
The methods are also exposed via the MCAsmParser interface, which allows more
than one client to control them. Previously, GenericAsmParser was playing with
a member var in AsmParser directly (by virtue of being its friend).
llvm-svn: 172440
The MCAsmParser interface defines ParseIdentifier is public. There's no reason
whatsoever for AsmParser (which implements the MCAsmParser interface) to hide
this method.
This is all part of a bigger scheme. Several asm parsing "extensions" use the
main parser properly through the MCAsmParser interface. However,
GenericAsmParser has much more exclusive access and uses implementation details
from the concrete implementation - AsmParser, in which it is also declared as
a friend. This makes for overly coupled code, and even makes it hard to split
GenericAsmParser into a separate file. There's no reason why GenericAsmParser
shouldn't be able to access AsmParser through an abstract interface, as long
as it's actually registered as an extension.
llvm-svn: 172276
GenericAsmParser extension, where a lot of directives are already being parsed.
The end goal is having just a single place (and a single lookup table) for
all directive parsing.
llvm-svn: 172268
This patch adjust the r171506 to make all DWARF enconding pc-relative
for PPC64. It also adds the R_PPC64_REL32 relocation handling in MCJIT
(since the eh_frame will not generate PIC-relative relocation) and also
adds the emission of stubs created by the TTypeEncoding.
llvm-svn: 171979
method because getContents().size() already covers it. So computeFragmentSize
can use the generic MCEncodedFragment interface when querying both Data and
Relaxable fragments for contents sizes.
No change in functionality
llvm-svn: 171903
This is necessary not only for representing empty ranges, but for handling
multibyte characters in the input. (If the end pointer in a range refers to
a multibyte character, should it point to the beginning or the end of the
character in a char array?) Some of the code in the asm parsers was already
assuming this anyway.
llvm-svn: 171765
This patch fixes the PPC eh_frame definitions for the personality and
frame unwinding for PIC objects. It makes PIC build correctly creates
relative relocations in the '.rela.eh_frame' segments and thus avoiding
a text relocation that generates a DT_TEXTREL segments in link phase.
llvm-svn: 171506
instructions in the assembly code variant if one exists.
The intended use for this is so tools like lldb and darwin's otool(1)
can be switched to print Intel-flavored disassembly.
I discussed extensively this API with Jim Grosbach and we feel
while it may not be fully general, in reality there is only one syntax
for each assembly with the exception of X86 which has exactly
two for historical reasons.
rdar://10989182
llvm-svn: 170477
compilation directory.
This defaults to the current working directory, just as it always has,
but now an assembler can choose to override it with a custom directory.
I've taught llvm-mc about this option and added a test case.
llvm-svn: 170371
Mips16 is really a processor decoding mode (ala thumb 1) and in the same
program, mips16 and mips32 functions can exist and can call each other.
If a jal type instruction encounters an address with the lower bit set, then
the processor switches to mips16 mode (if it is not already in it). If the
lower bit is not set, then it switches to mips32 mode.
The linker knows which functions are mips16 and which are mips32.
When relocation is performed on code labels, this lower order bit is
set if the code label is a mips16 code label.
In general this works just fine, however when creating exception handling
tables and dwarf, there are cases where you don't want this lower order
bit added in.
This has been traditionally distinguished in gas assembly source by using a
different syntax for the label.
lab1: ; this will cause the lower order bit to be added
lab2=. ; this will not cause the lower order bit to be added
In some cases, it does not matter because in dwarf and debug tables
the difference of two labels is used and in that case the lower order
bits subtract each other out.
To fix this, I have added to mcstreamer the notion of a debuglabel.
The default is for label and debug label to be the same. So calling
EmitLabel and EmitDebugLabel produce the same result.
For various reasons, there is only one set of labels that needs to be
modified for the mips exceptions to work. These are the "$eh_func_beginXXX"
labels.
Mips overrides the debug label suffix from ":" to "=." .
This initial patch fixes exceptions. More changes most likely
will be needed to DwarfCFException to make all of this work
for actual debugging. These changes will be to emit debug labels in some
places where a simple label is emitted now.
Some historical discussion on this from gcc can be found at:
http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.htmlhttp://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html
llvm-svn: 170279
for a wider range of GOT entries that can hold thread-relative offsets.
This matches the behavior of GCC, which was not documented in the PPC64 TLS
ABI. The ABI will be updated with the new code sequence.
Former sequence:
ld 9,x@got@tprel(2)
add 9,9,x@tls
New sequence:
addis 9,2,x@got@tprel@ha
ld 9,x@got@tprel@l(9)
add 9,9,x@tls
Note that a linker optimization exists to transform the new sequence into
the shorter sequence when appropriate, by replacing the addis with a nop
and modifying the base register and relocation type of the ld.
llvm-svn: 170209
should only occur on invalid input. Instruction matching errors aren't
unexpected, so we can't rely on the AsmParsers HadError variable directly.
rdar://12840278
llvm-svn: 170037
PowerPC target. This is the last of the four models, so we now have
full TLS support.
This is mostly a straightforward extension of the general dynamic model.
I had to use an additional Chain operand to tie ADDIS_DTPREL_HA to the
register copy following ADDI_TLSLD_L; otherwise everything above the
ADDIS_DTPREL_HA appeared dead and was removed.
As before, there are new test cases to test the assembly generation, and
the relocations output during integrated assembly. The expected code
gen sequence can be read in test/CodeGen/PowerPC/tls-ld.ll.
There are a couple of things I think can be done more efficiently in the
overall TLS code, so there will likely be a clean-up patch forthcoming;
but for now I want to be sure the functionality is in place.
Bill
llvm-svn: 170003
Add R_ARM_NONE and R_ARM_PREL31 relocation types
to MCExpr. Both of them will be used while
generating .ARM.extab and .ARM.exidx sections.
llvm-svn: 169965
Given a thread-local symbol x with global-dynamic access, the generated
code to obtain x's address is:
Instruction Relocation Symbol
addis ra,r2,x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x
addi r3,ra,x@got@tlsgd@l R_PPC64_GOT_TLSGD16_L x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
<use address in r3>
The implementation borrows from the medium code model work for introducing
special forms of ADDIS and ADDI into the DAG representation. This is made
slightly more complicated by having to introduce a call to the external
function __tls_get_addr. Using the full call machinery is overkill and,
more importantly, makes it difficult to add a special relocation. So I've
introduced another opcode GET_TLS_ADDR to represent the function call, and
surrounded it with register copies to set up the parameter and return value.
Most of the code is pretty straightforward. I ran into one peculiarity
when I introduced a new PPC opcode BL8_NOP_ELF_TLSGD, which is just like
BL8_NOP_ELF except that it takes another parameter to represent the symbol
("x" above) that requires a relocation on the call. Something in the
TblGen machinery causes BL8_NOP_ELF and BL8_NOP_ELF_TLSGD to be treated
identically during the emit phase, so this second operand was never
visited to generate relocations. This is the reason for the slightly
messy workaround in PPCMCCodeEmitter.cpp:getDirectBrEncoding().
Two new tests are included to demonstrate correct external assembly and
correct generation of relocations using the integrated assembler.
Comments welcome!
Thanks,
Bill
llvm-svn: 169910
because that method is only getting called for MCInstFragment. These
fragments aren't even generated when RelaxAll is set, which is why the
flag reference here is superfluous. Removing it simplifies the code
with no harmful effects.
An assertion is added higher up to make sure this path is never
reached.
llvm-svn: 169886
InitSections is called before the MCContext is initialized it could cause
duplicate temporary symbols to be emitted later (after context initialization
resets the temporary label counter).
llvm-svn: 169785
the assembler. This is useful in order to know how the numbers add up,
since in particular the Align fragments account for a non-trivial
portion of the emitted fragments (especially on -O0 which sets
relax-all).
llvm-svn: 169747
SmallString. This makes it possible to use the length-erased SmallVectorImpl
in the interface without imposing buffer size. Thus, the size of MCInstFragment
is back down since a preallocated 8-byte contents buffer is enough.
It would be generally a good idea to rid all the fragments of SmallString as
contents, because a vector just makes more sense.
llvm-svn: 169644
Before this patch, when you objdump an LLVM-compiled file, objdump tried to
decode data-in-code sections as if they were code. This patch adds the missing
Mapping Symbols, as defined by "ELF for the ARM Architecture" (ARM IHI 0044D).
Patch based on work by Greg Fitzgerald.
llvm-svn: 169609
original change description:
change MCContext to work on the doInitialization/doFinalization model
reviewed by Evan Cheng <evan.cheng@apple.com>
llvm-svn: 169553
This is more consistent with other vectors in this code. In addition, I ran some
tests compiling a large program and >96% of fragments have 4 or less fixups, so
SmallVector<4> is a good optimization.
llvm-svn: 169433
This is for the lldb team so most of but not all of the values are
to be printed as hex with this option. Some small values like the
scale in an X86 address were requested to printed in decimal
without the leading 0x.
There may be some tweaks need to places that may still be in
decimal that they want in hex. Specially for arm. I made my best
guess. Any tweaks from here should be simple.
I also did the best I know now with help from the C++ gurus
creating the cleanest formatImm() utility function and containing
the changes. But if someone has a better idea to make something
cleaner I'm all ears and game for changing the implementation.
rdar://8109283
llvm-svn: 169393
on 64-bit PowerPC ELF.
The patch includes code to handle external assembly and MC output with the
integrated assembler. It intentionally does not support the "old" JIT.
For the initial-exec TLS model, the ABI requires the following to calculate
the address of external thread-local variable x:
Code sequence Relocation Symbol
ld 9,x@got@tprel(2) R_PPC64_GOT_TPREL16_DS x
add 9,9,x@tls R_PPC64_TLS x
The register 9 is arbitrary here. The linker will replace x@got@tprel
with the offset relative to the thread pointer to the generated GOT
entry for symbol x. It will replace x@tls with the thread-pointer
register (13).
The two test cases verify correct assembly output and relocation output
as just described.
PowerPC-specific selection node variants are added for the two
instructions above: LD_GOT_TPREL and ADD_TLS. These are inserted
when an initial-exec global variable is encountered by
PPCTargetLowering::LowerGlobalTLSAddress(), and later lowered to
machine instructions LDgotTPREL and ADD8TLS. LDgotTPREL is a pseudo
that uses the same LDrs support added for medium code model's LDtocL,
with a different relocation type.
The rest of the processing is straightforward.
llvm-svn: 169281
missed in the first pass because the script didn't yet handle include
guards.
Note that the script is now able to handle all of these headers without
manual edits. =]
llvm-svn: 169224
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
- Each macro instantiation introduces a new buffer, and FindBufferForLoc() is
linear, so previously macro instantiation could be N^2 for some pathological
inputs.
llvm-svn: 169073
The default for 64-bit PowerPC is small code model, in which TOC entries
must be addressable using a 16-bit offset from the TOC pointer. Additionally,
only TOC entries are addressed via the TOC pointer.
With medium code model, TOC entries and data sections can all be addressed
via the TOC pointer using a 32-bit offset. Cooperation with the linker
allows 16-bit offsets to be used when these are sufficient, reducing the
number of extra instructions that need to be executed. Medium code model
also does not generate explicit TOC entries in ".section toc" for variables
that are wholly internal to the compilation unit.
Consider a load of an external 4-byte integer. With small code model, the
compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
With medium model, it instead generates:
addis 3, 2, .LC1@toc@ha
ld 3, .LC1@toc@l(3)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the
32-bit offset of ei's TOC entry from the TOC base pointer. Similarly,
.LC1@toc@l is a relocation requesting the lower 16 bits. Note that if
the linker determines that ei's TOC entry is within a 16-bit offset of
the TOC base pointer, it will replace the "addis" with a "nop", and
replace the "ld" with the identical "ld" instruction from the small
code model example.
Consider next a load of a function-scope static integer. For small code
model, the compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc test_fn_static.si[TC],test_fn_static.si
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
For medium code model, the compiler generates:
addis 3, 2, test_fn_static.si@toc@ha
addi 3, 3, test_fn_static.si@toc@l
lwz 4, 0(3)
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
Again, the linker may replace the "addis" with a "nop", calculating only
a 16-bit offset when this is sufficient.
Note that it would be more efficient for the compiler to generate:
addis 3, 2, test_fn_static.si@toc@ha
lwz 4, test_fn_static.si@toc@l(3)
The current patch does not perform this optimization yet. This will be
addressed as a peephole optimization in a later patch.
For the moment, the default code model for 64-bit PowerPC will remain the
small code model. We plan to eventually change the default to medium code
model, which matches current upstream GCC behavior. Note that the different
code models are ABI-compatible, so code compiled with different models will
be linked and execute correctly.
I've tested the regression suite and the application/benchmark test suite in
two ways: Once with the patch as submitted here, and once with additional
logic to force medium code model as the default. The tests all compile
cleanly, with one exception. The mandel-2 application test fails due to an
unrelated ABI compatibility with passing complex numbers. It just so happens
that small code model was incredibly lucky, in that temporary values in
floating-point registers held the expected values needed by the external
library routine that was called incorrectly. My current thought is to correct
the ABI problems with _Complex before making medium code model the default,
to avoid introducing this "regression."
Here are a few comments on how the patch works, since the selection code
can be difficult to follow:
The existing logic for small code model defines three pseudo-instructions:
LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for
constant pool addresses. These are expanded by SelectCodeCommon(). The
pseudo-instruction approach doesn't work for medium code model, because
we need to generate two instructions when we match the same pattern.
Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY
node for medium code model, and generates an ADDIStocHA followed by either
a LDtocL or an ADDItocL. These new node types correspond naturally to
the sequences described above.
The addis/ld sequence is generated for the following cases:
* Jump table addresses
* Function addresses
* External global variables
* Tentative definitions of global variables (common linkage)
The addis/addi sequence is generated for the following cases:
* Constant pool entries
* File-scope static global variables
* Function-scope static variables
Expanding to the two-instruction sequences at select time exposes the
instructions to subsequent optimization, particularly scheduling.
The rest of the processing occurs at assembly time, in
PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to
a "real" PowerPC instruction. When a TOC entry needs to be created, this
is done here in the same manner as for the existing LDtoc, LDtocJTI, and
LDtocCPT pseudo-instructions (I factored out a new routine to handle this).
I had originally thought that if a TOC entry was needed for LDtocL or
ADDItocL, it would already have been generated for the previous ADDIStocHA.
However, at higher optimization levels, the ADDIStocHA may appear in a
different block, which may be assembled textually following the block
containing the LDtocL or ADDItocL. So it is necessary to include the
possibility of creating a new TOC entry for those two instructions.
Note that for LDtocL, we generate a new form of LD called LDrs. This
allows specifying the @toc@l relocation for the offset field of the LD
instruction (i.e., the offset is replaced by a SymbolLo relocation).
When the peephole optimization described above is added, we will need
to do similar things for all immediate-form load and store operations.
The seven "mcm-n.ll" test cases are kept separate because otherwise the
intermingling of various TOC entries and so forth makes the tests fragile
and hard to understand.
The above assumes use of an external assembler. For use of the
integrated assembler, new relocations are added and used by
PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for
proper generation of the various relocations for the same sequences
tested with the external assembler.
llvm-svn: 168708
to support it. Original patch with the parsing and plumbing by the PaX team and
Roman Divacky. I added the bits in MCDwarf.cpp and the test.
llvm-svn: 168565
Necessary to give disassembler users (like darwin's otool) a possibility to
dlopen libLTO and still initialize the required LLVM bits. This used to go
through libMCDisassembler but that's a gross layering violation, the MC layer
can't pull in functions from the targets. Adding a function to libLTO is a bit
of a hack but not worse than exposing other disassembler bits from libLTO.
Fixes PR14362.
llvm-svn: 168545
Give MCCFIInstruction a single, private constructor and add helper static
methods that create each type of cfi instruction. This is is preparation
for changing its representation. The representation with a pair
MachineLocations older than MC and has been abused quiet a bit to support
more cfi instructions.
llvm-svn: 168532
run through the 'C' preprocessor. That is pick up the file name
and line numbers from the cpp hash file line comments for the
dwarf file and line numbers tables.
rdar://9275556
llvm-svn: 167237
This patch adds initial PPC64 TOC MC object creation using the small mcmodel
(a single 64K TOC) adding the some TOC relocations (R_PPC64_TOC,
R_PPC64_TOC16, and R_PPC64_TOC16DS).
The addition of 'undefinedExplicitRelSym' hook on 'MCELFObjectTargetWriter'
is meant to avoid the creation of an unreferenced ".TOC." symbol (used in
the .odp creation) as well to set the R_PPC64_TOC relocation target as the
temporary ".TOC." symbol. On PPC64 ABI, the R_PPC64_TOC relocation should
not point to any symbol.
llvm-svn: 166677
see the offsetof operator. Previously, we were matching something like MOVrm
in the front-end and later matching MOVrr in the back-end. This change makes
things more consistent. It also fixes cases where we can't match against a
memory operand as the source (test cases coming).
Part of rdar://12470317
llvm-svn: 166592
Per the October 12, 2012 Proposal for annotated disassembly output sent out by
Jim Grosbach this set of changes implements this for X86 and arm. The llvm-mc
tool now has a -mdis option to produced the marked up disassembly and a couple
of small example test cases have been added.
rdar://11764962
llvm-svn: 166445
a memory operand. Retain this information and then add the sizing directives
to the IR. This allows the backend to do proper instruction selection.
llvm-svn: 166316
layer. Add the ParseMSInlineAsm() function, which is the new interface to
clang. Also expose the new MCAsmParserSemaCallback interface, which is used
by the back-end to do name lookup in Sema. Finally, remove the now defunct
APIs introduced in r165946.
llvm-svn: 166183
inline assembly. For the time being, these will be called directly by clang.
However, in the near future I expect these to be sunk back into the MC layer
and more basic APIs (e.g., getClobbers(), getConstraints(), etc.) will be called
by clang.
llvm-svn: 165946
the interface between the front-end and the MC layer when parsing inline
assembly. Unfortunately, this is too deep into the parsing stack. Specifically,
we're unable to handle target-independent assembly (i.e., assembly directives,
labels, etc.). Note the MatchAndEmitInstruction() isn't the correct
abstraction either. I'll be exposing target-independent hooks shortly, so this
is really just a cleanup.
llvm-svn: 165858
This adds 'elf' as a recognized target triple environment value and overrides the default generated object format on Windows platforms if that value is present. This patch also enables MCJIT tests on Windows using the new environment value.
llvm-svn: 165030
The target backend can support data-in-code load commands even when
the assembler doesn't, or vice-versa. Allow targets to opt-in for
direct-to-object.
PR13973.
llvm-svn: 164974
to improve compatibility with GNU as.
Based on a patch by PaX Team.
Fixed assertion failures on non-Darwin and added additional test cases.
llvm-svn: 164248
Now where we used to call ReInitMCSubtargetInfo, we actually recompute
the same information as InitMCSubtargetInfo instead of only setting
the feature bits.
llvm-svn: 164105
* wrap code blocks in \code ... \endcode;
* refer to parameter names in paragraphs correctly (\arg is not what most
people want -- it starts a new paragraph);
* use \param instead of \arg to document parameters in order to be consistent
with the rest of the codebase.
llvm-svn: 163902
Apparently, NumSubRegIndices was completely unused before. Adjust it by
one to include the null subreg index, just like getNumRegs() includes
the null register.
llvm-svn: 163628
For some reason .lcomm uses byte alignment and .comm log2 alignment so we can't
use the same setting for both. Fix this by reintroducing the LCOMM enum.
I verified this against mingw's gcc.
llvm-svn: 163420
- Darwin lied about not supporting .lcomm and turned it into zerofill in the
asm parser. Push the zerofill-conversion down into macho-specific code.
- This makes the tri-state LCOMMType enum superfluous, there are no targets
without .lcomm.
- Do proper error reporting when trying to use .lcomm with alignment on a target
that doesn't support it.
- .comm and .lcomm alignment was parsed in bytes on COFF, should be power of 2.
- Fixes PR13755 (.lcomm crashes on ELF).
llvm-svn: 163395
within the codegen EK_GPRel64BlockAddress. This was not
supported for direct object output and resulted in an assertion.
This change adds support for EK_GPRel64BlockAddress for
direct object.
One fallout from this is to turn on rela relocations
for mips64 to match gas.
llvm-svn: 162334
There are situations where inline ASM may want to change the section -- for
instance, to create a variable in the .data section. However, it cannot do this
without (potentially) restoring to the wrong section. E.g.:
asm volatile (".section __DATA, __data\n\t"
".globl _fnord\n\t"
"_fnord: .quad 1f\n\t"
".text\n\t"
"1:" :::);
This may be wrong if this is inlined into a function that has a "section"
attribute. The user should use `.pushsection' and `.popsection' here instead.
The addition of `.previous' is added for completeness.
<rdar://problem/12048387>
llvm-svn: 161477
Empty macro arguments at the end of the list should be as-if not specified at
all, but those in the middle of the list need to be kept so as not to screw
up the positional numbering. E.g.:
.macro foo
foo_-bash___:
nop
.endm
foo 1, 2, 3, 4
foo 1, , 3, 4
Should create two labels, "foo_1_2_3_4" and "foo_1__3_4".
rdar://11948769
llvm-svn: 161002
subtarget CPU descriptions and support new features of
MachineScheduler.
MachineModel has three categories of data:
1) Basic properties for coarse grained instruction cost model.
2) Scheduler Read/Write resources for simple per-opcode and operand cost model (TBD).
3) Instruction itineraties for detailed per-cycle reservation tables.
These will all live side-by-side. Any subtarget can use any
combination of them. Instruction itineraries will not change in the
near term. In the long run, I expect them to only be relevant for
in-order VLIW machines that have complex contraints and require a
precise scheduling/bundling model. Once itineraries are only actively
used by VLIW-ish targets, they could be replaced by something more
appropriate for those targets.
This tablegen backend rewrite sets things up for introducing
MachineModel type #2: per opcode/operand cost model.
llvm-svn: 159891
which many Mips 64 ABIs use than for O64 which many
if not all other target ABIs use.
Most architectures have the following 64 bit relocation record format:
typedef struct
{
Elf64_Addr r_offset; /* Address of reference */
Elf64_Xword r_info; /* Symbol index and type of relocation */
} Elf64_Rel;
typedef struct
{
Elf64_Addr r_offset;
Elf64_Xword r_info;
Elf64_Sxword r_addend;
} Elf64_Rela;
Whereas N64 has the following format:
typedef struct
{
Elf64_Addr r_offset;/* Address of reference */
Elf64_Word r_sym; /* Symbol index */
Elf64_Byte r_ssym; /* Special symbol */
Elf64_Byte r_type3; /* Relocation type */
Elf64_Byte r_type2; /* Relocation type */
Elf64_Byte r_type; /* Relocation type */
} Elf64_Rel;
typedef struct
{
Elf64_Addr r_offset;/* Address of reference */
Elf64_Word r_sym; /* Symbol index */
Elf64_Byte r_ssym; /* Special symbol */
Elf64_Byte r_type3; /* Relocation type */
Elf64_Byte r_type2; /* Relocation type */
Elf64_Byte r_type; /* Relocation type */
Elf64_Sxword r_addend;
} Elf64_Rela;
The structure is the same size, but the r_info data element
is now 5 separate elements. Besides the content aspects,
endian byte reordering will be different for the area with
each element being endianized separately.
I treat this as generic and continue to pass r_type as
an integer masking and unmasking the byte sized N64
values for N64 mode. I've implemented this and it causes no
affect on other current targets.
This passes make check.
Jack
llvm-svn: 159299
This allows a subtarget to explicitly specify the issue width and
other properties without providing pipeline stage details for every
instruction.
llvm-svn: 157979
Use a dedicated MachO load command to annotate data-in-code regions.
This is the same format the linker produces for final executable images,
allowing consistency of representation and use of introspection tools
for both object and executable files.
Data-in-code regions are annotated via ".data_region"/".end_data_region"
directive pairs, with an optional region type.
data_region_directive := ".data_region" { region_type }
region_type := "jt8" | "jt16" | "jt32" | "jta32"
end_data_region_directive := ".end_data_region"
The previous handling of ARM-style "$d.*" labels was broken and has
been removed. Specifically, it didn't handle ARM vs. Thumb mode when
marking the end of the section.
rdar://11459456
llvm-svn: 157062
Previously, an unsupported/unknown assembler directive issued a warning.
That's generally unsafe, and inconsistent with the behaviour of pretty
much every system assembler. Now that the MC assemblers are mature
enough to be the default on multiple targets, it's reasonable to
issue errors for these.
For target or platform directives that need to stay warnings, we
should add explicit handlers for them in, e.g., ELFAsmParser.cpp,
DarwinAsmParser.cpp, et. al., and issue the warning there.
rdar://9246275
llvm-svn: 155926
The caller is already responsible for eating any additional input on the
line. Putting an additional EatToEndOfStatement() in ParseStatement()
causes an entire extra statement to be consumed when treating warnings
as errors. For example, test/MC/macros.s will assert() because the
.endmacro directive is missed as a result.
rdar://11355843
llvm-svn: 155925
A trailing comma means no argument at all (i.e., as if the comma were not
present), not an empty argument to the invokee.
rdar://11252521
llvm-svn: 154863
by default.
This is a behaviour configurable in the MCAsmInfo. I've decided to turn
it on by default in (possibly optimistic) hopes that most assemblers are
reasonably sane. If this proves a problem, switching to default seems
reasonable.
I'm not sure if this is the opportune place to test, but it seemed good
to make sure it was tested somewhere.
llvm-svn: 154235
disassembler requires a MCSubtargetInfo and a
MCInstrInfo to exist in order to initialize the
instruction printer and disassembler; however,
although the printer and disassembler keep
references to these objects they do not own them.
Previously, the MCSubtargetInfo and MCInstrInfo
objects were just leaked.
I have extended LLVMDisasmContext to own these
objects and delete them when it is destroyed.
llvm-svn: 154192
This needs a test, but it will take some time to figure
out the best way to get an input that will produce > 2^16 relocs.
Patch by Graydon Hoare!
llvm-svn: 152787
debug info for assembly files. We were already doing the right thing when
producing debug info for C/C++.
ELF linkers don't know dwarf, so they depend on these relocations to produce
valid dwarf output.
llvm-svn: 151655
We on the linker to resolve calls to the appropriate BL/BLX instruction
to make interworking function correctly. It uses the symbol in the
relocation to do that, so we need to be careful about being too clever.
To enable this for ARM mode, split the BL/BLX fixup kind off from the
unconditional-branch fixups.
rdar://10927209
llvm-svn: 151571
Add support for a missed case when the symbols in a difference
expression are in the same section but not the same fragment.
rdar://10924681
llvm-svn: 151345
construction. Simplify its interface, implementation, and users
accordingly as there is no longer an 'uninitialized' state to check for.
Also, fixes a bug lurking in the interface as there was one method that
didn't correctly check for initialization.
llvm-svn: 151024
Fix the type of eh_frame on Solaris so that Sun ld doesn't fail to combine them (thus making it impossible for the unwind library to find them and breaking exceptions).
llvm-svn: 150814
This CL delays reading of function bodies from initial parse until
materialization, allowing overlap of compilation with bitcode download.
llvm-svn: 149918
cache disassemblers according to the string value
of the target triple, not according to the enum
of the triple CPU. The reason for this is that
certain attributes of the instruction set are not
reflected in the enum, but only in the string.
llvm-svn: 149773
needed to emit a 64-bit gp-relative relocation entry. Make changes necessary
for emitting jump tables which have entries with directive .gpdword. This patch
does not implement the parts needed for direct object emission or JIT.
llvm-svn: 149668
symbol from an assignment. In this case the symbol did not have a fragment so
MCObjectWriter::IsSymbolRefDifferenceFullyResolved() should not have been
calling IsSymbolRefDifferenceFullyResolvedImpl() with a NULL fragment and should
just have returned false in that case.
llvm-svn: 149442
This enables the linker to match concrete relocation types (absolute or relative) with whatever library or C++ support code is being linked against.
llvm-svn: 149057
When not using subsections via symbols, the assembler can resolve
symbol differences (including pcrel references) to non-local
labels at assembly time, not just those in the same atom.
llvm-svn: 148865
If the two fragments are in the same Atom, then the difference
expression is resolvable at compile time. Previously we were checking
that they were in the same fragment, but that breaks down in the
presence of instruction relaxation which has multiple fragments in the
same atom.
rdar://10711829
llvm-svn: 148423
When the non-local symbol in the expression is in the same fragment
as the second symbol, the assembler can still evaluate the expression
without needing a relocation.
For example, on ARM:
_foo:
ldr lr, (_foo - 4)
rdar://10348687
llvm-svn: 148341
directives was in the wrong place and getting triggered incorectly with a
cpp .file directive. This change fixes that and adds a test case.
llvm-svn: 147951
functional change in r147860 to use DW_TAG_label's instead TAG_subprogram's.
This only changes names and updates comments. No functional change.
llvm-svn: 147877
of several newly un-defaulted switches. This also helps optimizers
(including LLVM's) recognize that every case is covered, and we should
assume as much.
llvm-svn: 147861
assembly source when it generates the TAG_subprogram dwarf debug info for
the labels that have nothing between them as in this bit of assembly source:
% cat ZeroLength.s
_func1:
_func2:
nop
One solution would be to not emit the subsequent labels with the same address
and use the next label with a different address or the end of the section for
the AT_high_pc value of the TAG_subprogram.
Turns out in llvm-mc it is not possible in all cases to determine of two
symbols have the same value at the point we put out the TAG_subprogram dwarf
debug info.
So we will have llvm-mc instead of putting out TAG_subprogram's put out
DW_TAG_label's. And the DW_TAG_label does not have a AT_high_pc value which
avoids the problem.
This commit is only the functional change to make the diffs clear as to what is
really being changed. The next commit will be to clean up the names of such
things like MCGenDwarfSubprogramEntry to something like MCGenDwarfLabelEntry.
rdar://10666925
llvm-svn: 147860
file error checking. Use that to error on an unfinished cfi_startproc.
The error is not nice, but is already better than a segmentation fault.
llvm-svn: 147717
test cases where there were a lot of relocations applied relative to a large
rodata section. Gas would create a symbol for each of these whereas we would
be relative to the beginning of the rodata section. This change mimics what
gas does.
Patch by Jack Carter.
llvm-svn: 146468
subdirectories to traverse into.
- Originally I wanted to avoid this and just autoscan, but this has one key
flaw in that new subdirectories can not automatically trigger a rerun of the
llvm-build tool. This is particularly a pain when switching back and forth
between trees where one has added a subdirectory, as the dependencies will
tend to be wrong. This will also eliminates FIXME implicitly.
llvm-svn: 146436
generates the dwarf Compile Unit DIE and a dwarf subprogram DIE for each
non-temporary label.
The next part will be to get the clang driver to enable this when assembling
a .s file. rdar://9275556
llvm-svn: 146262
When the file isn't being built with subsections-via-symbols, symbol
differences involving non-local symbols can be resolved more aggressively.
Needed for gas compatibility.
llvm-svn: 146054
Whether a fixup needs relaxation for the associated instruction is a
target-specific function, as the FIXME indicated. Create a hook for that
and use it.
llvm-svn: 145881
as MC is the only assembler we support.
This splits MS/Windows and GNU/Windows ASM infos into two seperate classes.
While there is currently only one difference, full MS C++ ABI support will
require many more.
llvm-svn: 145409
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.
llvm-svn: 144788
This will break users of the LLVMCreateDisasm API (not that I know of any). They have to call the
LLVMInitializeAll* functions from llvm-c/Target.h themselves now. edis' C API in all its horribleness
should be unaffected.
llvm-svn: 144385
it is separating the directory part from the basename of the FileName. Noticed
that this:
.file 1 "dir/foo"
when assembled got the two parts switched. Using the Mac OS X dwarfdump tool
it can be seen easily:
% dwarfdump -a a.out
include_directories[ 1] = 'foo'
Dir Mod Time File Len File Name
---- ---------- ---------- ---------------------------
file_names[ 1] 1 0x00000000 0x00000000 dir
...
Which should be:
...
include_directories[ 1] = 'dir'
Dir Mod Time File Len File Name
---- ---------- ---------- ---------------------------
file_names[ 1] 1 0x00000000 0x00000000 foo
llvm-svn: 143521
-g flag. In this part we generate the .file for the source being assembled and
the .loc's for the assembled instructions.
The next part will be to generate the dwarf Compile Unit DIE and a dwarf
subprogram DIE for each non-temporary label.
Once the next part is done test cases will be added. rdar://9275556
llvm-svn: 143509
.file filenumber "directory" "filename"
This removes one join+split of the directory+filename in MC internals. Because
bitcode files have independent fields for directory and filenames in debug info,
this patch may change the .o files written by existing .bc files.
llvm-svn: 142300
the X86 asmparser to produce ranges in the one case that was annoying me, for example:
test.s:10:15: error: invalid operand for instruction
movl 0(%rax), 0(%edx)
^~~~~~~
It should be straight-forward to enhance filecheck, tblgen, and/or the .ll parser to use
ranges where appropriate if someone is interested.
llvm-svn: 142106
for cpp pre-processed assembly we give correct filename and line numbers when
reporting errors in assembly files when using clang and -integrated-as on .s
files. rdar://8998895
llvm-svn: 141814
using llvm's public 'C' disassembler API now including annotations.
Hooked this up to Darwin's otool(1) so it can again print things like branch
targets for example this:
blx _puts
instead of this:
blx #-36
and includes support for annotations for branches to symbol stubs like:
bl 0x40 @ symbol stub for: _puts
and annotations for pc relative loads like this:
ldr r3, #8 @ literal pool for: Hello, world!
Also again can print the expression encoded in the Mach-O relocation entries for
things like this:
movt r0, :upper16:((_foo-_bar)+1234)
llvm-svn: 141129
Assembler private local symbols aren't legal targets of symbol attributes,
so issue a diagnostic for them.
Based on patch by Stepan Dyatkovskiy.
llvm-svn: 139807
If we see an EOF w/o a preceding end-of-line, return an EndOfStatement
token before returning the Eof token.
Based on patch by Stepan Dyatkovskiy.
llvm-svn: 139798
#line directives with the needed support in the lexer. Next will be to build
a simple file/line# table mapping source SMLoc's for later use by diagnostics.
And the last step will be to get the diagnostics to use the mapping for file
and line numbers.
llvm-svn: 139669
- On COFF the .lcomm directive has an alignment argument.
- On ELF we fall back to .local + .comm
Based on a patch by NAKAMURA Takumi.
Fixes PR9337, PR9483 and PR10128.
llvm-svn: 138976
.cfi_startproc. e.g. libffi:
$ cat confopt.c
asm (".cfi_startproc\n\t.cfi_endproc");
int main () { return 0; }
Teach MC / dwarf emission to handle these cfi directives which essentially
create an empty frame.
rdar://10017184
llvm-svn: 138504
Assigned symbol addresses get truncated to 32-bits, even on 64-bit platforms.
That's obviously bogus.
For example,
.globl _foo
.equ _foo, 0x987654321ULL
rdar://9922863
llvm-svn: 137158
This is meant to be overriden by backends. Implement an override on PowerPC
which adjusts the offset by 2 for ha16/lo16 relocation kinds. This removes
a commented out hack and enables hello world to be compiled on PowerPC.
llvm-svn: 136905
them properly. Specifically, the disassembler clearly attempts to
initialiaze all TargetInfo, MCTargeDesc, AsmParser, and Disassembler
sublibraries of registered targets. This makes the CMakeLists accurately
reflect this intent in the code.
This should fix the last of the link errors that I have gotten reports
of on OS X, but if anyone continues to see link errors, continue to
pester me and I'll look into it.
llvm-svn: 136603
for targets that don't have an MC-ized disassembler. I'm suspicious that
this shouldn't actually be happening, but hoping to fix the CMake build
on macs first, and investigate why second.
llvm-svn: 136508
First off, only depend on the actual MC-ized disassemblers in the
targets, not all of the libraries those in turn depend on.
Second off, only depend on those MC-ized disassemblers for targets we're
building.
This should fix builds of fewer than all targets.
llvm-svn: 136455
specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.
I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.
This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.
This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.
Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.
This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.
llvm-svn: 136433
assert-path code, as previously we would have fallen off the end of the
function, but please review and let me know if this should go somewhere
else.
This fixes a Clang warning:
lib/MC/MCMachOStreamer.cpp:201:11: error: enumeration value 'MCSA_IndirectSymbol' not handled in switch [-Werror,-Wswitch-enum]
switch (Attribute) {
^
1 error generated.
llvm-svn: 135976
The .local, .hidden, .internal, and .protected are not legal for all supported
file formats (in particular, they're invalid for MachO). Move the parsing for
them into the ELF assembly parser since that's the format they're for.
Similarly, .weak is used by COFF and ELF, but not MachO, so move the parsing
to the COFF and ELF asm parsers. Previously, using any of these directives
on Darwin would result in an assertion failure in the parser; now we get
a diagnostic as we should.
rdar://9827089
llvm-svn: 135921
- Introduce JITDefault code model. This tells targets to set different default
code model for JIT. This eliminates the ugly hack in TargetMachine where
code model is changed after construction.
llvm-svn: 135580
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
llvm-svn: 135468
to MCRegisterInfo. Also initialize the mapping at construction time.
This patch eliminate TargetRegisterInfo from TargetAsmInfo. It's another step
towards fixing the layering violation.
llvm-svn: 135424
TargetAsmInfo, which in turn pulls in TargetRegisterInfo, etc. :-( There are
other cases of violations, but this is probably the worst.
This patch is but one small step towards fixing this. 500 more steps to go. :-(
llvm-svn: 135131
Update the debug output interface for MCParsedAsmOperand to have a print()
method which takes an output stream argument, an << operator which invokes
the print method using the given stream, and a dump() method which prints
the operand to the dbgs() stream. This makes the interface more consistent
with the rest of LLVM, and more convenient to use at the debugger command
line.
llvm-svn: 135043
The enum names as well as order (i.e. value)
had skewed, which means that consumers of the
tablegen-ed table would see different values than
intended. Make both files have a superset of enums,
and add classification as needed for numMCOperands.
Reviewed by Owen Anderson
llvm-svn: 134905
and MCSubtargetInfo.
- Added methods to update subtarget features (used when targets automatically
detect subtarget features or switch modes).
- Teach X86Subtarget to update MCSubtargetInfo features bits since the
MCSubtargetInfo layer can be shared with other modules.
- These fixes .code 16 / .code 32 support since mode switch is updated in
MCSubtargetInfo so MC code emitter can do the right thing.
llvm-svn: 134884
CPU, and feature string. Parsing some asm directives can change
subtarget state (e.g. .code 16) and it must be reflected in other
modules (e.g. MCCodeEmitter). That is, the MCSubtargetInfo instance
must be shared.
llvm-svn: 134795
- Each target asm parser now creates its own MCSubtatgetInfo (if needed).
- Changed AssemblerPredicate to take subtarget features which tablegen uses
to generate asm matcher subtarget feature queries. e.g.
"ModeThumb,FeatureThumb2" is translated to
"(Bits & ModeThumb) != 0 && (Bits & FeatureThumb2) != 0".
llvm-svn: 134678
numbers should be printed instead of symbolic register names in
MCAsmStreamer::EmitRegisterName. This is necessary because some versions of
GNU assembler won't accept code in which symbolic register names are used in
cfi directives. There is no change in behavior unless the flag is explicitly
set to true by a backend.
llvm-svn: 134635
itineraries.
- Refactor TargetSubtarget to be based on MCSubtargetInfo.
- Change tablegen generated subtarget info to initialize MCSubtargetInfo
and hide more details from targets.
llvm-svn: 134257
be the first encoded as the first feature. It then uses the CPU name to look up
features / scheduling itineray even though clients know full well the CPU name
being used to query these properties.
The fix is to just have the clients explictly pass the CPU name!
llvm-svn: 134127
For example, ".byte 256" would previously assert() when emitting an object
file. Now it generates a diagnostic that the literal value is out of range.
rdar://9686950
llvm-svn: 134069
Move the target-specific RecordRelocation logic out of the generic MC
MachObjectWriter and into the target-specific object writers. This allows
nuking quite a bit of target knowledge from the supposedly target-independent
bits in lib/MC.
llvm-svn: 133844
"Reinstate r133435 and r133449 (reverted in r133499) now that the clang
self-hosted build failure has been fixed (r133512)."
Due to some additional warnings.
llvm-svn: 133700
The LSDA is a bit difficult for the non-initiated to read. Even with comments,
it's not always clear what's going on. This wraps the ASM streamer in a class
that retains the LSDA and then emits a human-readable description of what's
going on in it.
So instead of having to make sense of:
Lexception1:
.byte 255
.byte 155
.byte 168
.space 1
.byte 3
.byte 26
Lset0 = Ltmp7-Leh_func_begin1
.long Lset0
Lset1 = Ltmp812-Ltmp7
.long Lset1
Lset2 = Ltmp913-Leh_func_begin1
.long Lset2
.byte 3
Lset3 = Ltmp812-Leh_func_begin1
.long Lset3
Lset4 = Leh_func_end1-Ltmp812
.long Lset4
.long 0
.byte 0
.byte 1
.byte 0
.byte 2
.byte 125
.long __ZTIi@GOTPCREL+4
.long __ZTIPKc@GOTPCREL+4
you can read this instead:
## Exception Handling Table: Lexception1
## @LPStart Encoding: omit
## @TType Encoding: indirect pcrel sdata4
## @TType Base: 40 bytes
## @CallSite Encoding: udata4
## @Action Table Size: 26 bytes
## Action 1:
## A throw between Ltmp7 and Ltmp812 jumps to Ltmp913 on an exception.
## For type(s): __ZTIi@GOTPCREL+4 __ZTIPKc@GOTPCREL+4
## Action 2:
## A throw between Ltmp812 and Leh_func_end1 does not have a landing pad.
llvm-svn: 133286
Re-apply 133010, with fixes for inline assembler.
Original commit message:
"When an assembler local symbol is used but not defined in a module, a
Darwin assembler wants to issue a diagnostic to that effect."
Added fix to only perform the check when finalizing, as otherwise we're not
done and undefined symbols may simply not have been encountered yet.
Passes "make check" and a self-host check on Darwin.
llvm-svn: 133071
When an assembler local symbol is used but not defined in a module, a
Darwin assembler wants to issue a diagnostic to that effect.
rdar://9559714
llvm-svn: 133010
VK_GOTOFF reloc. This matches as' behavior, but it is not clear why the linker
might need this, so I added a FIXME.
I could test this by duplicating test/MC/ELF/got.s, but it doesn't look
worthwhile.
llvm-svn: 132655
Parsing a register name/number for .cfi directives can't assume that a
register name starts with a '%' token. Be more flexible and check for a
register number instead. Still unlikely to be perfect, but it allows us
to parse both plain identifiers as register names and integers as register
numbers, which is what we're wanting to support at this point.
llvm-svn: 132466
suffix (e.g. .xdata$myfunc). The suffix part isn't implemented yet, but
I'll get to it in the next patch.
Fix up all callers of the affected functions. Make them pass said suffix to
the function.
llvm-svn: 132205
- Flip order of bitfields. This gets our output matching GAS.
- Handle case where the end of the prolog wasn't specified.
- If the resulting unwind info struct is less than 8 bytes, pad to 8 bytes.
Add a test for the latter two.
llvm-svn: 132188
still report leaks, but they're spurious now. Valgrind cannot peer into
std::vector objects--or any dynamic array, for that matter--because it doesn't
know how big the array is.
llvm-svn: 132174
Rework how the MCWin64EHUnwindInfo instances are stored. Fix issues with
chained unwind areas exposed by the test that were related to this.
The ChainedParent field had the wrong address, because when the chained unwind
info was added, the addresses shifted around. Now we store the pointers to the
structures, which are now allocated from the MC heap.
llvm-svn: 132106
them.
I had to add a special SwitchSectionNoChange method to MCStreamer just for
.seh_handlerdata. If this isn't OK, please let me know, and I'll find some
other way to fix .seh_handlerdata streaming.
llvm-svn: 132084
Add a size alignment check to the .seh_stackalloc directive parser. Add a
more descriptive error message to the .seh_handler directive parser.
Add methods to the TargetAsmInfo struct in support of all this.
llvm-svn: 131992
I haven't implemented any of the ones that take registers yet. The problem is
that for x86-64 the streamer methods expect a native x86 register number (note:
%r8-%r15 want 8-15 instead of 0-7; same for %xmm8-%xmm15). I haven't figured
out exactly how I want to do that yet.
llvm-svn: 131899
There's really nothing to implement. All this really does is swap to a
pseudo-section that later gets written to the unwind info struct. That
needs to be implemented in the object streamers.
llvm-svn: 131734
ours compatible with GAS.
In retrospect, I should have emailed binutils about this earlier. Thanks to
Kai Tietz for pointing out that GAS already had SEH directives.
llvm-svn: 131652
- StartChained and EndChained delimit a chained unwind area, which can contain
additional operations to be undone if an exception occurs inside of it.
- UnwindOnly declares that this function doesn't handle any exceptions. If it
has a handler, it's an unwind handler instead of an exception handler.
- Lsda declares the location and size of the LSDA, which in the Win64 EH
scheme is kept inside the UNWIND_INFO struct. Windows itself ignores the
LSDA; it's used by the Language-Specific Handler (the "Personality Function"
from DWARF).
llvm-svn: 131572
GAS has no such directives (not even mingw-w64 GAS has them), so I took
creative license with their names in assembly. I prefixed them all with
"w64_" to avoid namespace collisions, for example. If I discover that GAS
has taken a different approach, I'll change ours to match.
llvm-svn: 131525
the purposes of the Win64 EH tables, I realized we had no way to tell where
the function ends. (MASM bounds functions with PROC and ENDP keywords.)
Add a directive to delimit the end of the function, and rename the 'frame'
directive to more accurately reflect its duality with the new directive.
llvm-svn: 131522
("T is 1 if the target symbol S has type STT_FUNC and the
symbol addresses a Thumb instruction ;it is 0 otherwise."
from "ELF for the ARM Architecture" 4.7.1.2)
Patch by Koan-Sin Tan!
llvm-svn: 131406
LLVM and binutils.
With this patch, there are no functional differences between the .o
produced directly from LLVM versus the .s to .o via GNU as, for relocation tags
at least, for both PIC and non-PIC modes.
Because some non-PIC reloc tags are used (legally) on PIC, so IsPCRel flag is
necessary but not sufficient to determine whether the overall codegen mode is
PIC or not. Why is this necessary? There is an incompatibility of how relocs
are emitted in the .rodata section. Binutils PIC likes to emit certain relocs
as section relative offsets. Non-PIC does not do this.
So I added a hidden switch on the ELFObjectwriter "-arm-elf-force-pic" which
forces the objectwriter to pretend that all relocs are for PIC mode.
Todo: Activate ForceARMElfPIC to true if -relocation-model=pic is selected
on llc.
Todo: There are probably more issues for PIC mode on ARM/MC/ELF...
Todo: Existing tests in MC/ARM/elf-reloc*.ll need to be converted over to .s
tests as well as expanded to cover the gamut.
llvm-svn: 131205
it is both inefficient and unexpected by dwarfdump. Change to
a DW_FORM_data4.
While in here, change the predicate name to reflect that the position
is not really absolute (it is an offset), just that the linker needs a
relocation.
llvm-svn: 130846
for all symbol differences and can drop the old EmitPCRelSymbolValue
method.
This also make getExprForFDESymbol on ELF equal to the one on MachO, and it
can be made non-virtual.
llvm-svn: 130634
Currently the output should be almost identical to the one produced by CodeGen
to make the transition easier.
The only two differences I know of are:
* Some files get an extra advance loc of size 0. This will be fixed when
relaxations are enabled.
* The optimization of declaring an EH symbol as an external variable is not
implemented. This is a subset of adding the nounwind attribute, so we if really
this at -O0 we should probably do it at the IL level.
llvm-svn: 130623
small heap-allocated SmallString because it unconditionally forces a malloc.
(Revised version of r129688, with the necessary flush() call.)
llvm-svn: 129716
.long 80+08
go ahead and assume that if we've got an Error token that we handled it
already. Otherwise if it's a token we can't handle then go ahead and
return the default error.
llvm-svn: 129322
disassembler API. Hooked this up to the ARM target so such tools as Darwin's
otool(1) can now print things like branch targets for example this:
blx _puts
instead of this:
blx #-36
And even print the expression encoded in the Mach-O relocation entried for
things like this:
movt r0, :upper16:((_foo-_bar)+1234)
llvm-svn: 129284
error stream, in cases where the AsmParser is
being invoked by EDDisassembler. Before, they
were being sent to errs() because no error handler
was installed in the SourceMgr.
llvm-svn: 129177
getEDInfo(), in which case this code would dereference
NULL. EDInst can already handle NULL info, so avoid
the dereference and pass NULL through.
Reviewed by Sean Callanan
llvm-svn: 128904
otool(1), this time with the needed fix for case sensitive file systems :) .
This is a work in progress as the interface for producing symbolic operands is
not done. But a hacked prototype using information from the object file's
relocation entiries and replacing immediate operands with MCExpr's has been
shown to work with no changes to the instrucion printer. These APIs will be
moved into a dynamic library at some point.
llvm-svn: 128415
This is a work in progress as the interface for producing symbolic operands is
not done. But a hacked prototype using information from the object file's
relocation entiries and replacing immediate operands with MCExpr's has been
shown to work with no changes to the instrucion printer. These APIs will be
moved into a dynamic library at some point.
llvm-svn: 128308
The MC asm lexer wasn't honoring a non-default (anything but ';') statement
separator. Fix that, and generalize a bit to support multi-character
statement separators.
llvm-svn: 128227
the alias of an InstAlias instead of the thing being aliased. Because we need to
know the features that are valid for an InstAlias.
This is part of a work-in-progress.
llvm-svn: 127986
for calls to weak symbols with a definition has the appearance of working
with LLVM-generated code because weak symbol definitions are put in their
own sections.
llvm-svn: 126933
Introduce a variable in the AsmParserExtension whether [] is valid in an
expression. If it is true, parse them like (). Enable this for ELF only.
llvm-svn: 126443
enabled for all targets. Non-X86 targets should not have this behavior
enabled by default.
Joerg, if you would like to resubmit with the behavior conditionalized to be
X86-ELF only, that's fine.
llvm-svn: 126336
Now, Syntax is only used as a tie-breaker if the Arch
matches. Previously, a request for x86_64 disassembler followed by the
i386 disassembler in a single process would return the cached x86_64
disassembler. Fixes <rdar://problem/8958982>
llvm-svn: 125215
failures with relocations.
The code committed is a first cut at compatibility for emitted relocations in
ELF .o.
Why do this? because existing ARM tools like emitting relocs symbols as
explicit relocations, not as section-offset relocs.
Result is that with these changes,
1) relocs are now substantially identical what to gcc outputs.
2) larger apps (including many spec2k tests) compile, cross-link, and pass
Added reminder fixme to tests for future conversion to .s form.
llvm-svn: 124996
(yes, this is different from R_ARM_CALL)
- Adds a new method getARMBranchTargetOpValue() which handles the
necessary distinction between the conditional and unconditional br/bl
needed for ARM/ELF
At least for ARM mode, the needed fixup for conditional versus unconditional
br/bl is identical, but the ARM docs and existing ARM tools expect this
reloc type...
Added a few FIXME's for future naming fixups in ARMInstrInfo.td
llvm-svn: 124895
- Fixed :upper16: fix up routine. It should be shifting down the top 16 bits first.
- Added support for Thumb2 :lower16: and :upper16: fix up.
- Added :upper16: and :lower16: relocation support to mach-o object writer.
llvm-svn: 123424
in the right direction. It eliminated some hacks and will unblock codegen
work. But it's far from being done. It doesn't reject illegal expressions,
e.g. (FOO - :lower16:BAR). It also doesn't work in Thumb2 mode at all.
llvm-svn: 123369
R_ARM_MOVT_PREL and R_ARM_MOVW_PREL_NC.
2. Fix minor bug in ARMAsmPrinter - treat bitfield flag as a bitfield, not an enum.
3. Add support for 3 new elf section types (no-ops)
llvm-svn: 123294
preprocessed .s files and matches darwin gas. rdar://8798690
Also fix a comment on the next line of AsmParser.cpp after this new code.
llvm-svn: 122531
section.
This helps because in practice sections form a dag with debug sections pointing
to text sections. Finishing up the text sections first makes the debug section
relaxation trivial.
llvm-svn: 122314
portion. While the fragment boundary is usually already aligned, it is possible for it not to be, which
would lead to a non-aligned final displacement.
llvm-svn: 122091
IsSymbolRefDifferenceFullyResolved, it turns out this does change behavior on
enough cases for x86-32 that I would rather wait a bit on it.
- In practice, we will want to change this eventually because it only means we
generate less relocations (it also eliminates the need for the horrible
'.set' hack that Darwin requires in some places).
llvm-svn: 122042
- Unlike for fixups, we always do the "reliable" thing (not just for x86_64).
- Since Darwin 'as' would typically reject things that using this will allow,
we don't need to worry about compatibility.
llvm-svn: 122038
With this we don't need the EffectiveSize field anymore. Without that field
LayoutFragment only updates offsets and we don't need to invalidate the
current fragment when it is relaxed (only the ones following it).
This is also a very small improvement in the accuracy of the layout info as
we now use the after relaxation size immediately.
llvm-svn: 121857
the offset. Add a new fixup flag to represent this, and use it for the one fixups that I have a testcase for needing
this. It's quite likely that the other Thumb fixups will need this too, and to have their fixup encoding logic
adjusted accordingly.
llvm-svn: 121408
Added test to check bl __aeabi_read_tp gets emitted properly for ELF/ASM
as well as ELF/OBJ (including fixup)
Also added support for ELF::R_ARM_TLS_IE32
llvm-svn: 121312
before:
4 assembler - Number of assembler layout and relaxation steps
78563 assembler - Number of emitted assembler fragments
8693904 assembler - Number of emitted object file bytes
271223 assembler - Number of evaluated fixups
330771677 assembler - Number of fragment layouts
5958 assembler - Number of relaxed instructions
2508361 mcexpr - Number of MCExpr evaluations
real 0m26.123s
user 0m25.694s
sys 0m0.388s
after:
4 assembler - Number of assembler layout and relaxation steps
78563 assembler - Number of emitted assembler fragments
8693904 assembler - Number of emitted object file bytes
271223 assembler - Number of evaluated fixups
231507 assembler - Number of fragment layouts
5958 assembler - Number of relaxed instructions
2508361 mcexpr - Number of MCExpr evaluations
real 0m2.500s
user 0m2.113s
sys 0m0.273s
And yes, the outputs are identical :-)
llvm-svn: 121207
actuall addresses in a .o file, so it is better to let the MachO writer compute
it.
This is good for two reasons. First, areas that shouldn't care about
addresses now don't have access to it. Second, the layout of each section
is independent. I should use this in a subsequent commit to speed it up.
Most of the patch is just removing the section address computation. The two
interesting parts are the change on how we handle padding in the end
of sections and how MachO can get the address of a-b when a and b are in
different sections.
Since now the expression evaluation normally doesn't know the section address,
it will think that a-b needs relocation and let the MachO writer know. Once
it has computed the section addresses, it calls back the expression evaluation
with the section addresses to resolve these expressions.
The remaining problem is the handling of padding. Currently it will create
a special alignment fragment at the end. Since that fragment doesn't update
the alignment of the section, it needs the real address to be computed.
Since now the layout will not compute a-b with a and b in different sections,
the only effect that the special alignment fragment has is update the
address size of the section. This can also be done by the MachO writer.
llvm-svn: 121076
foo = a - b
.long foo
instead of just
.long a - b
First, on darwin9 64 bits the assembler produces the wrong result. Second,
if "a" is the end of the section all darwin assemblers (9, 10 and mc) will not
consider a - b to be a constant but will if the dummy foo is created.
Split how we handle these cases. The first one is something MC should take care
of. The second one has to be handled by the caller.
llvm-svn: 120889
doing that if the target is darwin10 or newer.
This fixes
*) Direct object emission was producing objects without the workaround on
darwin9.
*) Assembly printing was producing objects with the workaround on linux.
llvm-svn: 120866
darwin9 linker, what is needed to avoid it and where to get more information.
Also make the workaround simpler. Just the regular end_sequence we normally
create is more than 4 bytes.
Tested by building cctools and ld64 from darwin9 on a darwin10 system and using
those. I checked that I was able to reproduce the bootstrap failure when
the the workaround was disabled.
llvm-svn: 120854
contain only data. Handle them specially instead of using AddSectionToTheEnd.
This moves a hack from the generic assembler to the elf writer. It is also
a bit faster and should make other improvements easier.
llvm-svn: 120683
Lifted adjustFixupValue() from Darwin for sharing w ELF.
Test added
TODO:
refactor ELFObjectWriter::RecordRelocation more.
Possibly share more code with Darwin?
Lots more relocations...
llvm-svn: 120534
Next step is to rationally break apart the RecordRelocation()
Probably the step will be to have 1 member function for ech slot of the ELFRelocationEntry()
llvm-svn: 119978
MCStreamer instead of just MCObjectStreamer. Address changes cannot
be as efficient as we have to use DW_LNE_set_addres, but at least
most of the logic is shared.
This will be used so that, with CodeGen still using EmitDwarfLocDirective,
llvm-gcc is able to produce debug_line sections without needing an
assembler that supports .loc.
llvm-svn: 119777
and testing is easier. A good example is the unknown-location.ll test that
now can just look for ".loc 1 0 0". We also don't use a DW_LNE_set_address for
every address change anymore.
llvm-svn: 119613
variable if recursing fails to simplify it.
Factor AliasedSymbol to be a method of MCSymbol.
Update MCAssembler::EvaluateFixup to match the change in
EvaluateAsRelocatableImpl.
Remove the WeakRefExpr hack, as the object writer now sees the weakref with
no extra effort needed.
Nothing else is using MCTargetExpr, but keep it for now.
Now that the ELF writer sees relocations with aliases, handle
.weak foo2
foo2:
.weak bar2
.set bar2,foo2
.quad bar2
the same way gas does and produce a relocation with bar2.
llvm-svn: 119152
Added 2 new subclasses - X86ELFObjectWriter and ARMELFObectWriter.
ARM and X86 require different code for RecordRelocation(), possibly others.
llvm-svn: 119149
This moves most of the isUsed logic to the MCSymbol itself. With this we
get a bit more relaxed about allowing definitions after uses: uses that
don't evaluate their argument immediately (jmp foo) are accepted.
ddunbar, this was the smallest compromise I could think of that lets us
accept gcc (and clang!) assembly.
llvm-svn: 119144
nodes to indicate when ha16/lo16 modifiers should be used. This lets
us pass PowerPC/indirectbr.ll.
The one annoying thing about this patch is that the MCSymbolExpr isn't
expressive enough to represent ha16(label1-label2) which we need on
PowerPC. I have a terrible hack in the meantime, but this will have
to be revisited at some point.
Last major conversion item left is global variable references.
llvm-svn: 119105
We only produce debug line information if we have seen a line directive, so
this code is dead. Also, if we want to be bug by bug compatible with
gas and sometimes produce "empty" .debug_line sections, this will
match the content produced by gas.
llvm-svn: 118914
This is really slow with we have 1000s of sections each with a corresponding
relocation section. Also, it is only used by the ELF writer to add
basic data, so there is no need to force a new layout pass.
Should fix PR8563.
llvm-svn: 118377
// FIXME: We should compute this sooner, we don't want to recurse here, and
// we would like to be more functional.
In MCAssembler::ComputeFragmentSize.
llvm-svn: 118080
just
.type foo,@object
will produce an undefined reference to foo. On the other hand, a file with
just
.weakref bar, foo
will not. It is somewhat hard to support both in MC since both statements
should create the symbols. It should be possible if we really need to by
adding to the flags, but hopefully that is not necessary.
With this patch we do not produce a undefined reference in any of those cases.
The assembly file needs an actual use for the undefined reference to be
present.
This is in preparation for a patch implementing .weakref.
llvm-svn: 117735
* If we have a M or a G, reject sections without the type
* Only parse the flag specific arguments if we have M or G
* Parse the corresponding arguments for M and G
We ignore the G arguments and flag for now.
llvm-svn: 117608
1) Changed ValidateDwarfFileNumber() to isValidDwarfFileNumber() to be better
named. Since it is just a predicate and isn't actually changing any state.
2) Added a missing return in the comments for setCurrentDwarfLoc() in
include/llvm/MC/MCContext.h for fix formatting.
3) Changed clearDwarfLocSeen() to ClearDwarfLocSeen() since it does change
state.
4) Simplified the last test in isValidDwarfFileNumber() to just a one line
boolean test of MCDwarfFiles[FileNumber] != 0 for the final return statement.
llvm-svn: 115551
where both symbols are "local", that is non-external symbols, and there is
no "base" for the symbols used in the expression, that is the section has
no non-temporary symbols. This case looks like this:
% cat local_reloc_A-B.s
.long 0
LB: .long 1
.long LA - LB - 4
.long 2
LA: .long 3
which llvm-mc will not encode without this patch, generates a "unsupported
local relocations in difference" error, but the Darwin assembler will
encode with relocation entries like this:
% otool -rv a.out l.out
a.out:
Relocation information (__TEXT,__text) 2 entries
address pcrel length extern type scattered symbolnum/value
00000008 False long False SUB False 1 (__TEXT,__text)
00000008 False long False UNSIGND False 1 (__TEXT,__text)
which is very similar to what is encoded when the symbols don't have the
leading 'L' and they are not temporary symbols. Which llvm-mc and the
Darwin assembler will encoded like this:
Relocation information (__TEXT,__text) 2 entries
address pcrel length extern type scattered symbolnum/value
00000008 False long True SUB False B
00000008 False long True UNSIGND False A
This is the missing relocation encoding needed to allow the Mach-O x86
Dwarf file and line table to be emitted. So this patch also removes the
TODO from the if() statement in MCMachOStreamer::Finish() that didn't
call MCDwarfFileTable::Emit() for 64-bit targets.
llvm-svn: 115389
and output the dwarf line number tables. This contains the code to emit and
encode the dwarf line tables from the previously gathered information in the
MCLineSection objects. This contains all the details to encode the line and
address deltas into the dwarf line table.
To do this an MCDwarfLineAddrFragment has been added.
Also this moves the interface code out of Mach-O streamer into
MCDwarf so it should be useable by other object file formats.
There is now one call to be made from an MCObjectStreamer
EmitInstruction() method:
MCLineEntry::Make(this, getCurrentSection());
to create a line entry after each instruction is assembled.
And one call call to be made from an MCObjectStreamer Finish() method:
MCDwarfFileTable::Emit(this, DwarfLineSection);
when getContext().hasDwarfFiles() is true and is passed a object file specific
MCSection where to emit the dwarf file and the line tables.
This appears to now be correct for 32-bit targets, at least x86. But the
relocation entries for 64-bit Darwin needs some further work which is next
up to work on. So for now the 64-bit Mach-O target does not output the
dwarf file and line tables.
llvm-svn: 115157
if we are given a Layout object, even in cases when the value is not fixed.
This will be needed by the final patch for the dwarf .loc support to size a
new MCDwarf fragment needed to build and emit dwarf line number tables.
llvm-svn: 115155
With this patch in
movq $foo, foo(%rip)
foo:
.long foo
We produce a R_X86_64_32S for the first relocation and R_X86_64_32 for the
second one.
llvm-svn: 115134
resolved or not. Different object files have different restrictions and
different native assemblers have different idiosyncrasies we want to emulate
for now.
Move the existing MachO logic to the new place and implement an ELF one that
gets fixups to globals right.
llvm-svn: 115131
- I believe more modern 'gas' supports a more enhanced set of arithmetic on
them, but for now the only thing we can do is emit them as data.
llvm-svn: 114719
they are in. Both ways should be equivalent, but gas produces relocations
against the section.
Roman wrote the patch, I added the test.
llvm-svn: 114667
new VariantKind to the MCSymbolExpr seems like overkill, but I'm not sure
there's a more straightforward way to get the printing difference captured.
(i.e., x86 uses @PLT, ARM uses (PLT)).
llvm-svn: 114613
expression to include the modifier.
- Gross, but this a corner case we don't expect to see often in practice, but
it is worth accepting.
- Also improves diagnostics on invalid modifiers.
llvm-svn: 114154
The ELF implementation now creates text, data and bss to match the gnu as
behavior.
The text streamer still has the old MachO specific behavior since
the testsuite checks that it will error when a directive is given
before a setting the current section for example.
A nice benefit is that -n is not required anymore when producing
ELF files.
llvm-svn: 114027
the end of the line on a parser error, allowing skipping to happen
for syntactic errors but not for semantic errors. Before we would
miss emitting a diagnostic about the second line, because we skipped
it due to the semantic error on the first line:
foo %eax
bar %al
This fixes rdar://8414033 - llvm-mc ignores lines after an invalid instruction mnemonic errors
llvm-svn: 113688
and output the dwarf line number tables. This takes the current loc info after
an instruction is assembled and saves the needed info into an object that has
vector and for each section. These objects will be used for the final patch to
build and emit the encoded dwarf line number tables. Again for now this is only
in the Mach-O streamer but at some point will move to a more generic place.
llvm-svn: 112668
needed parsing for the .loc directive and saves the current info from that
into the context. The next patch will take the current loc info after an
instruction is assembled and save that info into a vector for each section for
use to build the line number tables. The patch after that will encode the info
from those vectors into the output file as the dwarf line tables.
llvm-svn: 111956
- Implemented by manually splicing the tokens. If this turns out to be
problematically platform specific, a more elegant solution would be to
implement some context dependent lexing support.
llvm-svn: 111934
Introduce a helper method to add a section to the end of a layout. This
will be used by the ELF ObjectWriter code to add the metadata sections
(symbol table, etc) to the end of an object file.
llvm-svn: 111171
previously collected info from the .file directives and outputs the encoded
bytes for it. For now this is only in the Mach-O streamer but at some point
will move to a more generic place.
llvm-svn: 110617
the info from the .file directive and makes file and directory tables that
will eventually be put out as part of the dwarf info in the output file.
llvm-svn: 109651
better in the llvm world. Among other things, this changes:
1. The guts of libedis are now moved into lib/MC/MCDisassembler
2. llvm-mc now depends on lib/MC/MCDisassembler, not tools/edis,
so edis and mc don't have to be built in series.
3. lib/MC/MCDisassembler no longer depends on the C api, the C
API depends on it.
4. Various code cleanup changes.
There is still a lot to be done to make edis fit with the llvm
design, but this is an incremental step in the right direction.
llvm-svn: 108869
- Currently includes a hack to limit ourselves to "In32BitMode" and "In64BitMode", because we don't have the other infrastructure to properly deal with setting SSE, etc. features on X86.
llvm-svn: 108677
- Currently initialization is a bit of a hack, but harmless. We need to rework
various parts of target initialization to clean this up.
llvm-svn: 108165
.weak_def_can_be_hidden directive. Chris pointed out that the MCAsmInfo.h/.cpp
chunks aren't needed for this until the compiler starts generating these. And
when that happens it will be more convenient for it to be a bool than a const
char*.
llvm-svn: 107906
metadata types which should be marked as "weak", but which the linker will
remove upon final linkage. For example, the "objc_msgSend_fixup_alloc" symbol is
defined like this:
.globl l_objc_msgSend_fixup_alloc
.weak_definition l_objc_msgSend_fixup_alloc
.section __DATA, __objc_msgrefs, coalesced
.align 3
l_objc_msgSend_fixup_alloc:
.quad _objc_msgSend_fixup
.quad L_OBJC_METH_VAR_NAME_1
This is different from the "linker_private" linkage type, because it can't have
the metadata defined with ".weak_definition".
llvm-svn: 107205
This makes the output look consistent, as well as help some third party assemblers expecting the attributes to be in the second column."
Patch by Arnaud de Grandmaison!
llvm-svn: 106469
correctly. The Lexer was incorrectly eating the newline casusing it to branch
to address 0. Updated the test case to use a "0:" label and a branch to "0b".
llvm-svn: 104038
- Of questionable utility, since in general anything which wants to do this should probably be within a target specific hook, which can rely on the sections being of the appropriate type. However, it can be useful for short term hacks.
llvm-svn: 103980
- Don't clear weak reference flag, 'as' was only "trying" to do this, it wasn't
actually succeeding.
- Clear the "lazy bound" bit when we mark something external. This corresponds
roughly to the lazy clearing of the bit that 'as' implements in
symbol_table_lookup.
- The exact meaning of these flags appears pretty loose, since 'as' isn't very
consistent. For now we just try to match 'as', we will clean this up one day
hopefully.
llvm-svn: 103964
variable has not yet been used in an expression. This allows us to support a few
cases that show up in real code (mostly because gcc generates it for Objective-C
on Darwin), without giving up a reasonable semantic model for assignment.
llvm-svn: 103950
of manually doing padding/editing layout in LayoutSection().
- This probably seems like six-of-one and half-dozen of another, but there
is a method to my madness.
llvm-svn: 103693
Made a stylistic changed to the code/comments related to the unsupported COMDAT selection type IMAGE_COMDAT_SELECT_LARGEST based on from Anton Korobeynikov.
llvm-svn: 103590
Now, the .linkonce directive is emitted as part of MCSectionCOFF::PrintSwitchToSection instead of AsmPrinter::EmitLinkage since it is an attribute of the section the symbol was placed into not the symbol itself.
llvm-svn: 103568
be diced into atoms, and adjust getAtom() to take this into account.
- This fixes relocations to symbols in fixed size literal sections, for
example.
llvm-svn: 103532
- This eliminates getAtomForAddress() (which was a linear search) and
simplifies getAtom().
- This also fixes some correctness problems where local labels at the same
address as non-local labels could be assigned to the wrong atom.
llvm-svn: 103480
current PC. rdar://7834775
We now produce an identical .o file compared to the cctools
assembler for something like this:
_f0:
L0:
jmp L1
.long . - L0
L1:
jmp A
.long . - L1
.zerofill __DATA,_bss,A,0
llvm-svn: 101227
raw_ostream to print an instruction to had to be specified
at MCInstPrinter construction time instead of being able
to pick at each call to printInstruction.
llvm-svn: 100307
Peter Collingbourne