This patch builds on some existing code to do CFG reconstruction from
a disassembled binary:
- MCModule represents the binary, and has a list of MCAtoms.
- MCAtom represents either disassembled instructions (MCTextAtom), or
contiguous data (MCDataAtom), and covers a specific range of addresses.
- MCBasicBlock and MCFunction form the reconstructed CFG. An MCBB is
backed by an MCTextAtom, and has the usual successors/predecessors.
- MCObjectDisassembler creates a module from an ObjectFile using a
disassembler. It first builds an atom for each section. It can also
construct the CFG, and this splits the text atoms into basic blocks.
MCModule and MCAtom were only sketched out; MCFunction and MCBB were
implemented under the experimental "-cfg" llvm-objdump -macho option.
This cleans them up for further use; llvm-objdump -d -cfg now generates
graphviz files for each function found in the binary.
In the future, MCObjectDisassembler may be the right place to do
"intelligent" disassembly: for example, handling constant islands is just
a matter of splitting the atom, using information that may be available
in the ObjectFile. Also, better initial atom formation than just using
sections is possible using symbols (and things like Mach-O's
function_starts load command).
This brings two minor regressions in llvm-objdump -macho -cfg:
- The printing of a relocation's referenced symbol.
- An annotation on loop BBs, i.e., which are their own successor.
Relocation printing is replaced by the MCSymbolizer; the basic CFG
annotation will be superseded by more related functionality.
llvm-svn: 182628
This fixes a bootstrapping problem with builds for Apple ARM targets.
Clang had the wrong prototype for __clear_cache with ARM targets. Rafael
fixed that in clang svn r181784 and r181810, but without those changes,
we can't build this code for ARM because clang reports an error about the
declaration in Memory.inc not matching the builtin declaration. Some of our
buildbots need to use an older compiler that doesn't have the clang fix.
Since __clear_cache is never used here when __APPLE__ is defined, I'm just
conditionalizing the declaration to match that. I also moved the declaration
of sys_icache_invalidate inside the conditional for __APPLE__ while I was at
it.
llvm-svn: 182223
lli's remote MCJIT code calls setExecutable just prior to running
code. In line with Darwin behaviour this seems to be the place to
invalidate any caches needed so that relocations can take effect
properly.
llvm-svn: 182213
BitVector/SmallBitVector::reference::operator bool remain implicit since
they model more exactly a bool, rather than something else that can be
boolean tested.
The most common (non-buggy) case are where such objects are used as
return expressions in bool-returning functions or as boolean function
arguments. In those cases I've used (& added if necessary) a named
function to provide the equivalent (or sometimes negative, depending on
convenient wording) test.
One behavior change (YAMLParser) was made, though no test case is
included as I'm not sure how to reach that code path. Essentially any
comparison of llvm::yaml::document_iterators would be invalid if neither
iterator was at the end.
This helped uncover a couple of bugs in Clang - test cases provided for
those in a separate commit along with similar changes to `operator bool`
instances in Clang.
llvm-svn: 181868
GCC declares __clear_cache in the gnu modes (-std=gnu++98,
-std=gnu++11), but not in the strict modes (-std=c++98, -std=c++11). This patch
declares it and therefore fixes the build when using one of the strict modes.
llvm-svn: 181785
Summary:
This patch allows using \n inside long help strings for command-line
options, so that all lines are equally indented. This is not a perfect solution,
as we don't (and probably don't want to) know about terminal width, but it
allows to format long help strings somehow readable without manually padding
them with spaces. A motivating example is -help output from clang-format (source
code in tools/clang-format/ClangFormat.cpp, see cl options offset, length,
style, and dump-config).
Reviewers: atrick, alexfh
Reviewed By: alexfh
CC: llvm-commits, rafael
Differential Revision: http://llvm-reviews.chandlerc.com/D779
llvm-svn: 181608
- previously formatted_raw_ostream tracked columns, now it tracks lines too
- used by (upcoming) DebugIR pass to know the line number to connect to each IR
instruction
llvm-svn: 181463
AArch64 is going to need some kind of cache-invalidation in order to
successfully JIT since it has a weak memory-model. This is provided by
a __clear_cache builtin in libgcc, which acts very much like the
32-bit ARM equivalent (on platforms where it exists).
llvm-svn: 181129
The intended semantics mirror autoconf, where the user is able to
specify a host triple, but if it's left to the build system then
"config.guess" is invoked for the default.
This also renames the LLVM_HOSTTRIPLE define to LLVM_HOST_TRIPLE to
fit in with the style of the surrounding defines.
llvm-svn: 181112
The llvm::sys::AddSignalHandler function (as well as related routines) in
lib/Support/Unix/Signals.inc currently registers a signal handler routine
via "sigaction". When this handler is called due to a SIGSEGV, SIGILL or
similar signal, it will show a stack backtrace, deactivate the handler,
and then simply return to the operating system. The intent is that the
OS will now retry execution at the same location as before, which ought
to again trigger the same error condition and cause the same signal to be
delivered again. Since the hander is now deactivated, the OS will take
its default action (usually, terminate the program and possibly create
a core dump).
However, this method doesn't work reliably on System Z: With certain
signals (namely SIGILL, SIGFPE, and SIGTRAP), the program counter stored
by the kernel on the signal stack frame (which is the location where
execution will resume) is not the instruction that triggered the fault,
but then instruction *after it*. When the LLVM signal handler simply
returns to the kernel, execution will then resume at *that* address,
which will not trigger the problem again, but simply go on and execute
potentially unrelated code leading to random errors afterwards.
To fix this, the patch simply goes and re-raises the signal in question
directly from the handler instead of returning from it. This is done
only on System Z and only for those signals that have this particular
problem.
llvm-svn: 181010
Summary:
This is http://llvm.org/PR15802. Backslashes preceding double quotes in
arguments must be escaped. The interesting bit is that all other
backslashes should *not* be escaped, because the un-escaping logic is
only triggered by the presence of a double quote character.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D705
llvm-svn: 180035
I will remove the isBigEndianHost function once I update clang.
The ifdef logic is designed to
* not use configure/cmake to avoid breaking -arch i686 -arch ppc.
* default to little endian
* be as small as possible
It looks like sys/endian.h is the preferred header on most modern BSD systems,
but it is better to change this in a followup patch as machine/endian.h is
available on FreeBSD, OpenBSD, NetBSD and OS X.
llvm-svn: 179527
It's possible for the lock file to disappear and the owning process to
return before we're able to see the generated file. Spin for a little
while to see if it shows up before failing.
llvm-svn: 178909
If the directory that will contain the unique file doesn't exist when
we tried to create the file, but another process creates it before we
get a chance to try creating it, we would bail out rather than try to
create the unique file.
llvm-svn: 178908
Summary:
Sets a report hook that emulates pressing "retry" in the "abort, retry,
ignore" dialog box that _CrtDbgReport normally raises. There are many
other ways to disable assertion reports, but this was the only way I
could find that still calls our exception handler.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D625
llvm-svn: 178880
when getting the host processor information. It emits a .byte sequence on GNUC compilers to work around lack of xgetbv support with older assemblers, and resolves a comment typo found in the previous patch.
llvm-svn: 178636
This reverts commit 617330909f0c26a3f2ab8601a029b9bdca48aa61.
It broke the bots:
/home/clangbuild2/clang-ppc64-2/llvm.src/unittests/ADT/SmallVectorTest.cpp:150: PushPopTest
/home/clangbuild2/clang-ppc64-2/llvm.src/unittests/ADT/SmallVectorTest.cpp:118: Failure
Value of: v[i].getValue()
Actual: 0
Expected: value
Which is: 2
llvm-svn: 178334
if execution failed. ExecuteAndWait returns -1 upon an execution failure, but
checking the return value isn't sufficient because the wait command may
return -1 as well. This new parameter is to be used by the clang driver in a
subsequent commit.
Part of rdar://13362359
llvm-svn: 178087
it's only really useful if you're going to crash anyways. Use it in the pretty stack trace
printer to kill the compiler if we hang while printing the stack trace.
llvm-svn: 177962
-time-ir-parsing flag
This breaks the layering of the Support library. We can't add an
implementation side to IRReader because it refers directly to entities
only accessible as part of the IR, AsmParser, and BitcodeReader
libraries. It can only be used in a context where all of those libraries
will be available.
We'll need to find some other way to get this functionality, and
hopefully solve the long-standing layering problem of IRReader.h...
llvm-svn: 177695
The DARWIN_USER_TEMP_DIR and DARWIN_USER_CACHE_DIR configuration
settings are more idiomatic for Darwin than the TMPDIR environment
variable.
llvm-svn: 177669
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
llvm-svn: 176733
The sys::fs::is_directory() check is unnecessary because, if the filename is
a directory, the function will fail anyway with the same error code returned.
Remove the check to avoid an unnecessary stat call.
Someone needs to review on windows and see if the check is necessary there or not.
llvm-svn: 176386
to create the parent path.
This can happen if the path is a relative filename and the current directory was removed.
Thanks to Daniel D. for the hint in fixing it.
llvm-svn: 176226
to lib/DebugInfo, with dumping in llvm-dwarfdump. This patch adds
initial ability to parse and dump CFA instructions contained in
entries.
To keep it manageable, the patch omits some more advanced capabilities
(accounted in TODOs):
* Parsing of instructions with BLOCK arguments (expression lists)
* Dumping of actual instruction arguments (currently only names are
dumped). This is quite tricky since the dumper has to effectively
"interpret" the instructions.
llvm-svn: 175820
/dev/stdin as an input when stdin is connected to a tty, for example.
No test, because it's difficult to write a reasonably portable test
for this. /dev/stdin isn't a character device when stdin is redirected
from a file or connected to a pipe.
llvm-svn: 175542
This change lets us bootstrap LLVM/Clang under ASan and MSan. It contains
fixes for 2 issues:
- X86JIT reads return address from stack, which MSan does not know is
initialized.
- bugpoint tests run binaries with RLIMIT_AS. This does not work with certain
Sanitizers.
We are no longer including config.h in Compiler.h with this change.
llvm-svn: 174306
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
llvm-svn: 174054
Remove the use of the 't' length modifier to avoid a gcc warning. Based
on usage, 32 bits of precision is good enough for printing a stack
offset for a stack trace.
't' length modifier isn't in C++03 but it *is* in C++11. Added a FIXME
to reintroduce once LLVM makes the switch to C++11.
Reviewer: gribozavr
llvm-svn: 173711
Add the x32 environment kind to the triple, and separate the concept of
pointer size and callee save stack slot size, since they're not equal
on x32.
llvm-svn: 173175
Previously we tried to infer it from the bit width size, with an added
IsIEEE argument for the PPC/IEEE 128-bit case, which had a default
value. This default value allowed bugs to creep in, where it was
inappropriate.
llvm-svn: 173138
In r143502, we renamed getHostTriple() to getDefaultTargetTriple()
as part of work to allow the user to supply a different default
target triple at configure time. This change also affected the JIT.
However, it is inappropriate to use the default target triple in the
JIT in most circumstances because this will not necessarily match
the current architecture used by the process, leading to illegal
instruction and other such errors at run time.
Introduce the getProcessTriple() function for use in the JIT and
its clients, and cause the JIT to use it. On architectures with a
single bitness, the host and process triples are identical. On other
architectures, the host triple represents the architecture of the
host CPU, while the process triple represents the architecture used
by the host CPU to interpret machine code within the current process.
For example, when executing 32-bit code on a 64-bit Linux machine,
the host triple may be 'x86_64-unknown-linux-gnu', while the process
triple may be 'i386-unknown-linux-gnu'.
This fixes JIT for the 32-on-64-bit (and vice versa) build on non-Apple
platforms.
Differential Revision: http://llvm-reviews.chandlerc.com/D254
llvm-svn: 172627
Right now, only OS X has a way to determine the column width of a string
(PR14910). Until we have a good way to deal with this, we just won't
print carets, source ranges, or fixits for SMDiagnostic if the source line
has multibyte characters in it.
llvm-svn: 172164
Like Clang's FixItHint, SMFixIt represents an insertion, replacement, or
removal of source text. One or more fix-its can be emitted as part of
a diagnostic, and will be printed below the source range line to show the
user how they can fix their code.
Currently, the only client of SMFixIt is clang-tblgen; thus, the tests for
this behavior live in clang/test/TableGen/tg-fixits.td. If/when SMFixIt is
adopted within LLVM itself, those tests should be moved to the LLVM suite.
llvm-svn: 172086
This is necessary not only for representing empty ranges, but for handling
multibyte characters in the input. (If the end pointer in a range refers to
a multibyte character, should it point to the beginning or the end of the
character in a char array?) Some of the code in the asm parsers was already
assuming this anyway.
llvm-svn: 171765
leaving this undefined, and despite the sentence in the standard that
seems to require it, I'll cede the point and assume its a bug in the
wording. Other parts of POSIX regularly allow for things to be -1
instead of undefined, this should too. Makes things more consistent too.
This should have to real impact for folks though.
llvm-svn: 171574
defines _POSIX_CPUTIME but doesn't support the clock_* functions.
I don't test the value of _POSIX_CPUTIME because the spec merely says
that if it is defined, the CPU-specific timers are available, whereas it
says that _POSIX_TIMERS must be defined and defined to a value greater
than zero. However, this may not work, as the POSIX spec clearly states:
"If the symbolic constant _POSIX_CPUTIME is defined, then the symbolic
constant _POSIX_TIMERS shall also be defined by the implementation to
have the value 200112L."
If this doesn't work, I'll add more hacks for Darwin.
llvm-svn: 171565
wall time, user time, and system time since a process started.
For walltime, we currently use TimeValue's interface and a global
initializer to compute a close approximation of total process runtime.
For user time, this adds support for an somewhat more precise timing
mechanism -- clock_gettime with the CLOCK_PROCESS_CPUTIME_ID clock
selected.
For system time, we have to do a full getrusage call to extract the
system time from the OS. This is expensive but unavoidable.
In passing, clean up the implementation of the old APIs and fix some
latent bugs in the Windows code. This might have manifested on Windows
ARM systems or other systems with strange 64-bit integer behavior.
The old API for this both user time and system time simultaneously from
a single getrusage call. While this results in fewer system calls, it
also results in a lower precision user time and if only user time is
desired, it introduces a higher overhead. It may be worthwhile to switch
some of the pass timers to not track system time and directly track user
and wall time. The old API also tracked walltime in a confusing way --
it just set it to the current walltime rather than providing any measure
of wall time since the process started the way buth user and system time
are tracked. The new API is more consistent here.
The plan is to eventually implement these methods for a *child* process
by using the wait3(2) system call to populate an rusage struct
representing the whole subprocess execution. That way, after waiting on
a child process its stats will become accurate and cheap to query.
llvm-svn: 171551
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
utils/sort_includes.py script.
Most of these are updating the new R600 target and fixing up a few
regressions that have creeped in since the last time I sorted the
includes.
llvm-svn: 171362
Implement the old API in terms of the new one. This simplifies the
implementation on Windows which can now re-use the self_process's once
initialization.
llvm-svn: 171330
Fix a truly odd namespace qualifier that was flat out wrong in the
process. The fully qualified namespace would have been
llvm::sys::TimeValue, llvm::TimeValue makes no sense.
llvm-svn: 171292
The coding style used here is not LLVM's style because this is modeled
after a Boost interface and thus done in the style of a candidate C++
standard library interface. I'll probably end up proposing it as
a standard C++ library if it proves to be reasonably portable and
useful.
This is just the most basic parts of the interface -- getting the
process ID out of it. However, it helps sketch out some of the boiler
plate such as the base class, derived class, shared code, and static
factory function. It also introduces a unittest so that I can
incrementally ensure this stuff works.
However, I've not even compiled this code for Windows yet. I'll try to
fix any Windows fallout from the bots, and if I can't fix it I'll revert
and get someone on Windows to help out. There isn't a lot more that is
mandatory, so soon I'll switch to just stubbing out the Windows side and
get Michael Spencer to help with implementation as he can test it
directly.
llvm-svn: 171289
structures to and from YAML using traits. The first client will
be the test suite of lld. The documentation will show up at:
http://llvm.org/docs/YamlIO.html
llvm-svn: 170019
textually as NativeClient. Also added a link to the native client project for
readers unfamiliar with it.
A Clang patch will follow shortly.
llvm-svn: 169291
missed in the first pass because the script didn't yet handle include
guards.
Note that the script is now able to handle all of these headers without
manual edits. =]
llvm-svn: 169224
"Windows.h" includes <Windows.h> which defines a bunch of stuff it shouldn't
(even with all the restriction macros). We have no control over this file, so
make it's scope as small as possible.
llvm-svn: 169165
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
uses. APFloat::convert() takes the pointer to the fltSemantics
variable, which is later accessed it in ~APFloat() desctructor.
That is, semantics must still be alive at the moment we delete
APFloat.
Found by experimental AddressSanitizer use-after-scope checker.
llvm-svn: 169047
Rationale:
1) This was the name in the comment block. ;]
2) It matches Clang's __has_feature naming convention.
3) It matches other compiler-feature-test conventions.
Sorry for the noise. =]
I've also switch the comment block to use a \brief tag and not duplicate
the name.
llvm-svn: 168996
appropriate unit tests. This change in itself is not expected to
affect any functionality at this point, but it will serve as a
stepping stone to improve FileCheck's variable matching capabilities.
Luckily, our regex implementation already supports backreferences,
although a bit of hacking is required to enable it. It supports both
Basic Regular Expressions (BREs) and Extended Regular Expressions
(EREs), without supporting backrefs for EREs, following POSIX strictly
in this respect. And EREs is what we actually use (rightly). This is
contrary to many implementations (including the default on Linux) of
POSIX regexes, that do allow backrefs in EREs.
Adding backref support to our EREs is a very simple change in the
regcomp parsing code. I fail to think of significant cases where it
would clash with existing things, and can bring more versatility to
the regexes we write. There's always the danger of a backref in a
specially crafted regex causing exponential matching times, but since
we mainly use them for testing purposes I don't think it's a big
problem. [it can also be placed behind a flag specific to FileCheck,
if needed].
For more details, see:
* http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-November/055840.html
* http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/156878.html
llvm-svn: 168802
The rationale is to get YAML filenames in diagnostics from
yaml::Stream::printError -- currently the filename is hard-coded as
"YAML" because there's no buffer information available.
Patch by Kim Gräsman!
llvm-svn: 168341
- The code could infinite loop trying to create unique files, if the directory
containing the unique file exists, but open() calls on non-existent files in
the path return ENOENT. This is true on the /dev/fd filesystem, for example.
- Will add a clang side test case for this.
llvm-svn: 168081
treating it as if it were an IEEE floating-point type with 106-bit
mantissa.
This makes compile-time arithmetic on "long double" for PowerPC
in clang (in particular parsing of floating point constants)
work, and fixes all "long double" related failures in the test
suite.
llvm-svn: 166951
This adds 'elf' as a recognized target triple environment value and overrides the default generated object format on Windows platforms if that value is present. This patch also enables MCJIT tests on Windows using the new environment value.
llvm-svn: 165030
For example, under a Linux chroot, /proc/ might not be mounted.
Therefor, we test if this file exist. If it is the case, use it (the current
behavior). Otherwise, we fall back to the detection used by *BSD.
The issue has been reported initially on the Debian bug tracker:
http://bugs.debian.org/674588
llvm-svn: 164676
whether or not we want to print out backtrace information. Useful
for libraries that don't need backtrace information on a crash.
rdar://11844710
llvm-svn: 164426
* wrap code blocks in \code ... \endcode;
* refer to parameter names in paragraphs correctly (\arg is not what most
people want -- it starts a new paragraph);
* use \param instead of \arg to document parameters in order to be consistent
with the rest of the codebase.
llvm-svn: 163902
Most of the code guarded with ANDROIDEABI are not
ARM-specific, and having no relation with arm-eabi.
Thus, it will be more natural to call this
environment "Android" instead of "ANDROIDEABI".
Note: We are not using ANDROID because several projects
are using "-DANDROID" as the conditional compilation
flag.
llvm-svn: 163087
Tombstones and full hash collisions are rare, mark the "empty"
and "no collision" paths as likely. The bug in simplifycfg
that prevented the hints from being picked during selfhost
up was fixed recently :)
llvm-svn: 162874
Adds the vendor 'fsl' (used by Freescale SDK) to Triple. This will allow
clang support for Freescale cross-compile configurations.
Patch by Tobias von Koch.
llvm-svn: 162726
Since the llvm::sys::fs::map_file_pages() support function it relies on
is not yet implemented on Windows, the unit tests for FileOutputBuffer
are currently conditionalized to run only on unix.
llvm-svn: 161099
It is optimal at least up to 7 bits (I've tested all such cases)
This change to truncate() allows a little simplification to the multiplication code,
and it also makes multiplication optimal :)
llvm-svn: 160512
when run on an Intel Atom processor. The failures have arisen due
to changes elsewhere in the trunk over the past 8 weeks or so.
These failures were not detected by the Atom buildbot because the
CPU on the Atom buildbot was not being detected as an Atom CPU.
The fix for this problem is in Host.cpp and X86Subtarget.cpp, but
shall remain commented out until the current set of Atom test failures
are fixed.
Patch by Andy Zhang and Tyler Nowicki!
llvm-svn: 160451
file buffer is null-terminated.
If the file is smaller than we thought, mmap will not allow dereferencing
past the pages that are enough to cover the actual file size,
even though we asked for a larger address range.
rdar://11612916
llvm-svn: 160075
The cpuid registers are only available in privileged mode so we don't have
an OS-independent way of implementing this. ARM doesn't provide a list of
processor IDs so the list is somewhat incomplete.
llvm-svn: 159228
Fix 'sys::IdentifyFileType' to work with big and little endian byte orderings
when reading the ELF object file type.
Initial patch by Stefan Hepp.
llvm-svn: 159138
llvm::RawMemoryObject handles empty ranges just fine, and the assert can
be triggered in the wild by e.g. invoking clang with a file that
included an empty pre-compiled header file when clang has been built
with assertions enabled. Without assertions enabled, clang will properly
report that the empty file is not a valid PCH.
llvm-svn: 158769
StringMap suffered from the same bug as DenseMap: when you explicitly
construct it with a small number of buckets, you can arrange for the
tombstone-based growth path to be followed when the number of buckets
was less than '8'. In that case, even with a full map, it would compare
'0' as not less than '0', and refuse to grow the table, leading to
inf-loops trying to find an empty bucket on the next insertion. The fix
is very simple: use '<=' as the comparison. The same fix was applied to
DenseMap as well during its recent refactoring.
Thanks to Alex Bolz for the great report and test case. =]
llvm-svn: 158725
This is likely only the tip of the ice berg, but this particular bug
caused any double-free on a glibc system to turn into a deadlock! It is
not generally safe to either allocate or release heap memory from within
the signal handler. The 'pop_back()' in RemoveFilesToRemove was deleting
memory and causing the deadlock. What's worse, eraseFromDisk in PathV1
has lots of allocation and deallocation paths. We even passed 'true' in
a place that would have caused the *signal handler* to try to run the
'system' system call and shell out to 'rm -rf'. That was never going to
work...
This patch switches the file removal to use a vector of strings so that
the exact text needed for the 'unlink' system call can be stored there.
It switches the loop to be a boring indexed loop, and directly calls
unlink without looking at the error. It also works quite hard to ensure
that calling 'c_str()' is safe, by ensuring that the non-signal-handling
code path that manipulates the vector always leaves it in a state where
every element has already had 'c_str()' called at least once.
I dunno exactly how overkill this is, but it fixes the
deadlock-on-double free issue, and seems likely to prevent any other
issues from sneaking up.
Sorry for not having a test case, but I *really* don't know how to test
signal handling code easily....
llvm-svn: 158580
POWER4 is a 64-bit CPU (better matched to the 970).
The g3 is really the 750 (no altivec), the g4+ is the 74xx (not the 750).
Patch by Andreas Tobler.
llvm-svn: 158363
Original commit message:
Move PPC host-CPU detection logic from PPCSubtarget into sys::getHostCPUName().
Both the new Linux functionality and the old Darwin functions have been moved.
This change also allows this information to be queried directly by clang and
other frontends (clang, for example, will now have real -mcpu=native support).
llvm-svn: 158349
thread local data, embed them in the class using a uint64_t and make sure
we get compiler errors if there's a platform where this is not big enough.
This makes ThreadLocal more safe for using it in conjunction with CrashRecoveryContext.
Related to crash in rdar://11434201.
llvm-svn: 158342
Both the new Linux functionality and the old Darwin functions have been moved.
This change also allows this information to be queried directly by clang and
other frontends (clang, for example, will now have real -mcpu=native support).
llvm-svn: 158337
Apart from being slightly cheaper, this fixes a real bug that hits 32 bit
linux systems. When passing a file larger than 2G to be linked (which isn't
that uncommon with large projects such as WebKit), clang's driver checks
if the file exists but the file size doesn't fit in an off_t and stat(2)
fails with EOVERFLOW. Clang then says that the file doesn't exist instead
of passing it to the linker.
llvm-svn: 157891
For the Family 6 switch in sys::getHostCPUName, an unrecognized model was
reported as "i686". That's a really bad default since it means that new
CPUs will be treated as if they can only use 32-bit code. This just looks
at the cpuid extended feature flag for 64 bit support, and if that is set,
it uses a default x86-64 cpu. Similar logic is already used for the Family
15 code. <rdar://problem/11314502>
llvm-svn: 156486
- Just use sys::Process::GetRandomNumber instead of having two poor
implementations.
- This is ~70 times (!) faster on my OS X machine.
llvm-svn: 156238
The new target machines are:
nvptx (old ptx32) => 32-bit PTX
nvptx64 (old ptx64) => 64-bit PTX
The sources are based on the internal NVIDIA NVPTX back-end, and
contain more functionality than the current PTX back-end currently
provides.
NV_CONTRIB
llvm-svn: 156196
When building LLVM on Linux with libc++ with CMake TIME_WITH_SYS_TIME is
undefined, and HAVE_SYS_TIME_H is defined. This ends up including
sys/time.h but not time.h. Unix/TimeValue.inc requires time.h for asctime_r
and localtime. libstdc++ seems to include time.h anyway, but libc++ does
not.
Fix this by always including time.h
llvm-svn: 155382
The problem is that the struct file_status on UNIX systems has two
members called st_dev and st_ino; those are also members of the
struct stat, and they are reserved identifiers which can also be
provided as #define (and this is the case for st_dev on Hurd).
The solution (attached) is to rename them, for example adding a
"fs_" prefix (= file status) to them.
Patch by Pino Toscano
llvm-svn: 155354
DenseMap's hash function uses slightly more entropy and reduces hash collisions
significantly. I also experimented with Hashing.h, but it didn't gave a lot of
improvement while being much more expensive to compute.
llvm-svn: 154996
the caller requested a null-terminated one.
When mapping the file there could be a racing issue that resulted in the file being larger
than the FileSize passed by the caller. We already have an assertion
for this in MemoryBuffer::init() but have a runtime guarantee that
the buffer will be null-terminated, so do a copy that adds a null-terminator.
Protects against crash of rdar://11161822.
llvm-svn: 154082
buildbots. Original commit message:
[ADT] Change the trivial FoldingSetNodeID::Add* methods to be inline, reapplied
with a fix for the longstanding over-read of 32-bit pointer values.
llvm-svn: 152304
This currently assumes that both sets have the same SmallSize to keep the implementation simple,
a limitation that can be lifted if someone cares.
llvm-svn: 152143
new hash_value infrastructure, and replace their implementations using
hash_combine. This removes a complete copy of Jenkin's lookup3 hash
function (which is both significantly slower and lower quality than the
one implemented in hash_combine) along with a somewhat scary xor-only
hash function.
Now that APInt and APFloat can be passed directly to hash_combine,
simplify the rest of the LLVMContextImpl hashing to use the new
infrastructure.
llvm-svn: 152004
to do more invasive refactoring here to get FoldingSet to use size_t or
even hash_code directly, but for now this is a good first step to remove
Yet Another Hashing Algorithm from LLVM.
llvm-svn: 151859
of the proposed standard hashing interfaces (N3333), and to use
a modified and tuned version of the CityHash algorithm.
Some of the highlights of this change:
-- Significantly higher quality hashing algorithm with very well
distributed results, and extremely few collisions. Should be close to
a checksum for up to 64-bit keys. Very little clustering or clumping of
hash codes, to better distribute load on probed hash tables.
-- Built-in support for reserved values.
-- Simplified API that composes cleanly with other C++ idioms and APIs.
-- Better scaling performance as keys grow. This is the fastest
algorithm I've found and measured for moderately sized keys (such as
show up in some of the uniquing and folding use cases)
-- Support for enabling per-execution seeds to prevent table ordering
or other artifacts of hashing algorithms to impact the output of
LLVM. The seeding would make each run different and highlight these
problems during bootstrap.
This implementation was tested extensively using the SMHasher test
suite, and pased with flying colors, doing better than the original
CityHash algorithm even.
I've included a unittest, although it is somewhat minimal at the moment.
I've also added (or refactored into the proper location) type traits
necessary to implement this, and converted users of GeneralHash over.
My only immediate concerns with this implementation is the performance
of hashing small keys. I've already started working to improve this, and
will continue to do so. Currently, the only algorithms faster produce
lower quality results, but it is likely there is a better compromise
than the current one.
Many thanks to Jeffrey Yasskin who did most of the work on the N3333
paper, pair-programmed some of this code, and reviewed much of it. Many
thanks also go to Geoff Pike Pike and Jyrki Alakuijala, the original
authors of CityHash on which this is heavily based, and Austin Appleby
who created MurmurHash and the SMHasher test suite.
Also thanks to Nadav, Tobias, Howard, Jay, Nick, Ahmed, and Duncan for
all of the review comments! If there are further comments or concerns,
please let me know and I'll jump on 'em.
llvm-svn: 151822
find root names on Unix.
- This fixes make_absolute to not basically always call current_path() on
Unix systems.
- I think the API probably needs cleanup in this area, but I'll let Michael
handle that.
llvm-svn: 151681
it with memcpy. This also fixes a problem on big-endian hosts, where
addUnaligned would return different results depending on the alignment
of the data.
llvm-svn: 151247
chip in r139383, and the PSP components of the triple are really
annoying to parse. Let's leave this chapter behind. There is no reason
to expect LLVM to see a PSP-related triple these days, and so no
reasonable motivation to support them.
It might be reasonable to prune a few of the older MIPS triple forms in
general, but as those at least cause no burden on parsing (they aren't
both a chip and an OS!), I'm happy to leave them in for now.
llvm-svn: 151156
They're private static methods but we can just make them static
functions in the implementation. It makes the implementations a touch
more wordy, but takes another chunk out of the header file.
Also, take the opportunity to switch the names to the new coding
conventions.
No functionality changed here.
llvm-svn: 151047
construction. Simplify its interface, implementation, and users
accordingly as there is no longer an 'uninitialized' state to check for.
Also, fixes a bug lurking in the interface as there was one method that
didn't correctly check for initialization.
llvm-svn: 151024
Accomplished by moving the body of StringRef::edit_distance into
a separate function that accepts two ArrayRefs, and making
StringRef::edit_distance a wrapper around the new function.
llvm-svn: 150621
Unify default construction of error_code uses on this idiom so that users don't
feel compelled to make static globals for naming convenience. (unfortunately I
couldn't make the original ctor private as some APIs don't return their result,
instead using an out parameter (that makes sense to default construct) - which
is a bit of a pity. I did, however, find/fix some cases of unnecessary default
construction of error_code before I hit the unfixable cases)
llvm-svn: 150197
If someone would prefer a clear name for the 'success' error_value we could
come up with one - potentially just a 'named constructor' style
'error_value::success()' to make this expression more self-documenting. If
I see this come up in other cases I'll certainly consider it.
One step along the way to resolving PR11944.
llvm-svn: 150120
This CL delays reading of function bodies from initial parse until
materialization, allowing overlap of compilation with bitcode download.
llvm-svn: 149918
(This time I believe I've checked all the -Wreturn-type warnings from GCC & added the couple of llvm_unreachables necessary to silence them. If I've missed any, I'll happily fix them as soon as I know about them)
llvm-svn: 148262
or Clang is using this, and it would be hard to use it correctly given
the thread hostility of the function. Also, it never checked the return
which is rather dangerous with chdir. If someone was in fact using this,
please let me know, as well as what the usecase actually is so that
I can add it back and make it more correct and secure to use. (That
said, it's never going to be "safe" per-se, but we could at least
document the risks...)
llvm-svn: 148211
of several newly un-defaulted switches. This also helps optimizers
(including LLVM's) recognize that every case is covered, and we should
assume as much.
llvm-svn: 147861
Get back getHostTriple.
For JIT compilation, use the host triple instead of the default
target: this fixes some JIT testcases that used to fail when the
compiler has been configured as a cross compiler.
llvm-svn: 147542
Diagnostics are now emitted via the SourceMgr and we use MemoryBuffer
for buffer management. Switched the code to make use of the trailing
'0' that MemoryBuffer guarantees where it makes sense.
llvm-svn: 147063
clang/lib/Driver/Driver.cpp: Don't pass through negative exit status, or parent would be confused.
llvm::sys::Program::Wait(): Suppose 0x8000XXXX and 0xC000XXXX as abnormal exit code and pass it as negative value.
Win32 Exception Handler: Exit with ExceptionCode on an unhandle exception.
llvm-svn: 145389
Now that it needs to be exported in a public header (Valgrind.h)
it should be prefixed to avoid collision with other projects.
Add it to llvm-config.h as well.
This'll require regenerating the configure script after this
commit, but I don't have the required autoconf version.
llvm-svn: 145214
was returning incorrect values in rare cases, and incorrectly marking
exact conversions as inexact in some more common cases. Fixes PR11406, and a
missed optimization in test/CodeGen/X86/fp-stack-O0.ll.
llvm-svn: 145141
This was put in because in a certain version of DragonFlyBSD stat(2) lied about the
size of some files. This was fixed a long time ago so we can remove the workaround.
llvm-svn: 145059
These annotations are disabled entirely when either ENABLE_THREADS is off, or
building a release build. When enabled, they add calls to functions with no
statements to ManagedStatic's getters.
Use these annotations to inform tsan that the race used inside ManagedStatic
initialization is actually benign. Thanks to Kostya Serebryany for helping
write this patch!
llvm-svn: 144567
the X86 asmparser to produce ranges in the one case that was annoying me, for example:
test.s:10:15: error: invalid operand for instruction
movl 0(%rax), 0(%edx)
^~~~~~~
It should be straight-forward to enhance filecheck, tblgen, and/or the .ll parser to use
ranges where appropriate if someone is interested.
llvm-svn: 142106
Based on Horspool's simplified version of Boyer-Moore. We use a constant-sized table of
uint8_ts to keep cache thrashing low, needles bigger than 255 bytes are uncommon anyways.
The worst case is still O(n*m) but we do a lot better on the average case now.
llvm-svn: 142061
It extremely breaks builds when optimization is enabled. Twine should not hold temporary objects.
By the way, I might feel sad if I saw "i786-" "i1586-" or "iF86-".
llvm-svn: 142055
compiled on mips32r1 processors because it uses synci and rdhwr instructions
which are supported only on mips32r2, so I replaced this function with the
call to function cacheflush which works for both mips32r1 and mips32r2.
Patch by Sasa Stankovic
llvm-svn: 141564
This was only needed to locate llvm-gcc's installation directory when clang
falls back to run llvm-gcc for i386 kexts. As of clang svn r140187, we're
now just searching paths with several different Darwin versions on either
side of the current version, so this is no longer needed.
llvm-svn: 140188
gold plugin is built with Large File Support (sizeof(off_t) == 64 on i686)
and the rest of LLVM is built w/o Large File Support
(sizeof(off_t) == 32 on i686) which corrupts the stack.
llvm-svn: 139873
- Add TSFlags for the instruction formats. The idea here is to use
as much encoding as possible from getBinaryCodeForInstr, and having
TSFLags formats for that would make it easier to encode most part
of the instructions (since Mips encodings are pretty straightforward)
- Improve the mips mechanism for compilation callback
- Add Mips specific code for invalidating the instruction cache
- Next patch will address wrong tablegen encoding
Commit msg added by my own but the patch is from Sasa Stankovic.
llvm-svn: 139688
It is an endian-aware helper that can read data from a StringRef. It will
come in handy for DWARF parsing. This class is inspired by LLDB's
DataExtractor, but is stripped down to the bare minimum needed for DWARF.
Comes with unit tests!
llvm-svn: 139626
This patch adds support of NativeClient (*-*-nacl) OS support to LLVM.
It's already supported in autoconf/config.sub.
The motivation for this change is to start upstreaming PNaCl work. The
whole set of patches include llvm backends (i686, x86_64, ARM),
llvm-gcc (probably, would not be upstreamed because it's deprecated)
and clang (the work has been just started, the amount of changes is
going to be low and the most of the work is expected to be done close
to the mainline).
llvm-svn: 138005
When this variable is set, "uname -r" will return its value instead of the
real OS version. Make this affect LLVM's triple for consistency.
<rdar://problem/9919167>
llvm-svn: 137111
screwy things by setting PWD != getcwd(). For example, some developers I know
will use this to control the value in gcc's DW_AT_comp_dir value in debug
output. With this patch, that trick will now work on clang too.
The only other effect of this change is that the static analysis will now
respect $PWD when reporting the directory of the files in its HTML output. I
think that's fine.
llvm-svn: 136459
If true and 'model' parameter is not an absolute path, a temp directory will be prepended.
Make it true by default to match current behaviour.
llvm-svn: 136310
The header file was already properly located. The previous need for it
in Support had to do with the version string printing which was fixed in
r135757.
Also update build dependencies where libraries that needed the
functionality of the Target library (in the form of the TargetRegistry)
were picking it up via Support. This is pretty pervasive, essentially
every TargetInfo library (ARMInfo, etc) uses TargetRegistry, making it
depend on Target. All of these were previously just sneaking by.
llvm-svn: 135760
the Support library. Now its part of the TargetRegistry, and the three
commands that care about this explicitly register this extra bit of
version information.
The set of commands which care was computed by intersecting those which
use the Support library's version string printing and those that
initialize all the registered targets in a way that produces
a meaningful list. The only odd ball out is that 'clang -cc1as -version'
no longer prints the registered targets. I don't think anyone is really
interested in that (especially as the fact that llvm-mc does so is under
a FIXME), but if someone really does want this back I'll happily apply
the same patch there.
llvm-svn: 135757
function on the TargetRegistry. Also clean it up and use the modern LLVM
utility libraries available instead of rolling a few things manually.
llvm-svn: 135756
register extra version information to be printed. This is designed to
allow those tools which link in various targets to also print those
registered targets under --version.
Currently this printing logic is embedded into the Support library
directly; a huge layering violation. This is the first step to hoisting
it out into the tools without adding lots of duplicated code.
llvm-svn: 135755
According to Intel Application Note 485, this value is used for
"Intel Core i7 and Intel Xeon processor". Just include it with the other
"corei7-avx" entries.
llvm-svn: 134750
toString() now takes an optional bool argument that,
depending on the radix, adds the appropriate prefix
to the integer's string representation that makes it into a
meaningful C literal, e.g.:
hexademical: '-f' becomes '-0xf'
octal: '77' becomes '077'
binary: '110' becomes '0b110'
Patch by nobled@dreamwidth.org!
llvm-svn: 133032
Patch by: Jakub Staszak!
Introduces BranchProbability. Changes unsigned to uint32_t all over and
uint64_t only when overflow is expected.
llvm-svn: 132867
This is important for the correct lowering of unwind instructions
(which doesn't matter at all) and llvm.eh.resume calls (which does).
llvm-svn: 132291
This change allows bugpoint to pinpoint the "opt" pass and bitcode
segment responsible for a crash caused by miscompilation. At least it
works well for me now, without having to create any custom execution
wrappers.
llvm-svn: 131186
comments claimed it did this, but the LHS value was actually an unused variable.
The new system considers only the '-foo' part when comparing it for typos
against flags that have values, but still look at the whole string for flags
that don't. That way, we'll still correct '-inst=combine' to '-instcombine'.
llvm-svn: 130685
used by Clang. To help Clang integration, the PTX target has been split
into two targets: ptx32 and ptx64, depending on the desired pointer size.
- Add GCCBuiltin class to all intrinsics
- Split PTX target into ptx32 and ptx64
llvm-svn: 129851
developers can see if their driver changed any cl::Option's. The
current implementation isn't perfect but handles most kinds of
options. This is nice to have when decomposing the stages of
compilation and moving between different drivers. It's also a good
sanity check when comparing results produced by different command line
invocations that are expected to produce the comparable results.
Note: This is not an attempt to prolong the life of cl::Option. On the
contrary, it's a placeholder for a feature that must exist when
cl::Option is replaced by a more appropriate framework. A new
framework needs: a central option registry, dynamic name lookup,
non-global containers of option values (e.g. per-module,
per-function), *and* the ability to print options values and their defaults at
any point during compilation.
llvm-svn: 128910
- Adds support for sniffing PE/COFF files on win32 (.exe and .dll)
which are COFF files that have an MS-DOS compatibility stub on
the front of them.
- Fixes a bug in the COFFObjectFile's support for the Microsoft COFF
extension for long symbol names, wherein it was attempting to parse
the leading '/' in an extended symbol name reference as part of the
integer offset.
- Fixes bugs in COFFObjectFile and ELFObjectFile wherein section
and symbol iterators were being returned with uninitialized bytes;
the type DataRefImpl is a union between 2 32-bit words (d.a and d.b)
and a single intptr_t word (p). Only p was being initialized, so in
32-bit builds the result would be iterators with random upper 32-bit
words in their DataRefImpls. This caused random failures when
seeking around in object files.
Patch by Graydon Hoare!
llvm-svn: 128799
StringMap was not properly updating NumTombstones after a clear or rehash.
This was not fatal until now because the table was growing faster than
NumTombstones could, but with the previous change of preventing infinite
growth of the table the invariant (NumItems + NumTombstones <= NumBuckets)
stopped being observed, causing infinite loops in certain situations.
Patch by José Fonseca!
llvm-svn: 128567
The idea is, that if an ieee 754 float is divided by a power of two, we can
turn the division into a cheaper multiplication. This function sees if we can
get an exact multiplicative inverse for a divisor and returns it if possible.
This is the hard part of PR9587.
I tested many inputs against llvm-gcc's frotend implementation of this
optimization and didn't find any difference. However, floating point is the
land of weird edge cases, so any review would be appreciated.
llvm-svn: 128545
On MSVCRT and compatible, output of %e is incompatible to Posix by default. Number of exponent digits should be at least 2. "%+03d"
FIXME: Implement our formatter in future!
llvm-svn: 127872
makes valgrind stop complaining about uninitialized variables being read when it
accesses a bitfield (category) that shares its bits with these variables.
llvm-svn: 127871
report_fatal_error() invokes exit(). We know report_fatal_error() might not write messages to stderr when any errors were detected on FD == 2.
llvm-svn: 127726
inefficient file system buffering if the writes are not a multiple of the desired
buffer size. Avoid this by limiting the large write to a multiple of the buffer
size and copying the remainder into the buffer.
Thanks to Dan for pointing this out.
llvm-svn: 127026
of a constant had a minor typo introduced when copying it from the book, which
caused it to favor negative approximations over positive approximations in many
cases. Positive approximations require fewer operations beyond the multiplication.
In the case of division by 3, we still generate code that is a single instruction
larger than GCC's code.
llvm-svn: 126097
No one uses *-mingw64. mingw-w64 is represented as {i686|x86_64}-w64-mingw32. In llvm side, i686 and x64 can be treated as similar way.
llvm-svn: 125747
name of a path, after resolving symbolic links and eliminating excess
path elements such as "foo/../" and "./".
This routine still needs a Windows implementation, but I don't have a
Windows machine available. Help? Please?
llvm-svn: 125228
AC_CHECK_FUNCS seeks a symbol only in libs. We should check the declaration in string.h.
FIXME: I have never seen mingw(s) have strerror_s() (not _strerror_s()).
FIXME: Autoconf/CMake may seek strerror_s() with the definition MINGW_HAS_SECURE_API in future.
llvm-svn: 125172
may be useful to understand "none", this is not the place for it. Tweak
the fix to Normalize while there: the fix added in 123990 works correctly,
but I like this way better. Finally, now that Triple understands some
non-trivial environment values, teach the unittests about them.
llvm-svn: 124720
clang's -Wuninitialized-experimental warning.
While these don't look like real bugs, clang's
-Wuninitialized-experimental analysis is stricter
than GCC's, and these fixes have the benefit
of being general nice cleanups.
llvm-svn: 124073
This implementation already exists as ConnectedVNInfoEqClasses in
LiveInterval.cpp, and it seems to be generally useful to have a light-weight way
of forming equivalence classes of small integers.
IntEqClasses doesn't allow enumeration of the elements in a class.
llvm-svn: 122293
On LLP64 Win64, 'states1' (for small version) was expanded to 'char *' for large version. Thus small version would be mischosen when nstates > 32 regardless of sizeof(long) on Win64.
llvm-svn: 121942
zextOrTrunc(), and APSInt methods extend(), extOrTrunc() and new method
trunc(), to be const and to return a new value instead of modifying the
object in place.
llvm-svn: 121120
editing of the current interval.
These methods may cause coalescing, there are corresponding set*Unchecked
methods for editing without coalescing. The non-coalescing methods are useful
for applying monotonic transforms to all keys or values in a map without
accidentally coalescing transformed and untransformed intervals.
llvm-svn: 120829
The path also holds a reference to the root node, and that allows important
iterator accessors like start() and stop() to have no conditional code. (When
the compiler is clever enough to remove it.)
llvm-svn: 120165
This is a sorted interval map data structure for small keys and values with
automatic coalescing and bidirectional iteration over coalesced intervals.
Except for coalescing intervals, it provides similar functionality to std::map.
It is however much more compact for small keys and values, and hopefully faster
too.
The container object itself can hold the first few intervals without any
allocations, then it switches to a cache conscious B+-tree representation. A
recycling allocator can be shared between many containers, even between
containers holding different types.
The IntervalMap is initially intended to be used with SlotIndex intervals for:
- Backing store for LiveIntervalUnion that is smaller and faster than std::set.
- Backing store for LiveInterval with less overhead than std::vector for typical
intervals and O(N log N) merging of large intervals. 99% of virtual registers
need 4 entries or less and would benefit from the small object optimization.
- Backing store for LiveDebugVariable which doesn't exist yet, but will track
debug variables during register allocation.
This is a work in progress. Missing items are:
- Performance metrics.
- erase().
- insert() shrinkage.
- clear().
- More performance metrics.
- Simplification and detemplatization.
llvm-svn: 119787
This is a sorted interval map data structure for small keys and values with
automatic coalescing and bidirectional iteration over coalesced intervals.
Except for coalescing intervals, it provides similar functionality to std::map.
It is however much more compact for small keys and values, and hopefully faster
too.
The container object itself can hold the first few intervals without any
allocations, then it switches to a cache conscious B+-tree representation. A
recycling allocator can be shared between many containers, even between
containers holding different types.
The IntervalMap is initially intended to be used with SlotIndex intervals for:
- Backing store for LiveIntervalUnion that is smaller and faster than std::set.
- Backing store for LiveInterval with less overhead than std::vector for typical
intervals and O(N log N) merging of large intervals. 99% of virtual registers
need 4 entries or less and would benefit from the small object optimization.
- Backing store for LiveDebugVariable which doesn't exist yet, but will track
debug variables during register allocation.
This is a work in progress. Missing items are:
- Performance metrics.
- erase().
- insert() shrinkage.
- clear().
- More performance metrics.
- Simplification and detemplatization.
llvm-svn: 119772
cookie argument to the SourceMgr diagnostic stuff. This cleanly separates
LLVMContext's inlineasm handler from the sourcemgr error handling
definition, increasing type safety and cleaning things up.
llvm-svn: 119486
logic to use the new APInt methods. Among other things this
implements rdar://8501501 - llvm.smul.with.overflow.i32 should constant fold
which comes from "clang -ftrapv", originally brought to my attention from PR8221.
llvm-svn: 116457
Fix zeroExtend and signExtend to support empty sets, and to return the smallest
possible result set which contains the extension of each element in their
inputs. For example zext i8 [100, 10) to i16 is now [0, 256), not i16 [100, 10)
which contains 63446 members.
llvm-svn: 113187
I wasn't able to convince myself that all GetMainExecutable
implementations always return absolute paths; this prevents
unexpected behavior in case they ever don't.
llvm-svn: 112888
of a base class.
This makes it possible to unregister the file from FilesToRemove when
the file is done. Also, this eliminates the need for
formatted_tool_output_file.
llvm-svn: 112706
Triple class constructor. Only valid triples should now be used
inside LLVM - front-ends are now responsable for rejecting or
correcting invalid target triples. The Triple::normalize method
can be used to straighten out funky triples provided by users.
Give this a whirl through the buildbots to see if I caught all
places where triples enter LLVM.
llvm-svn: 112470
- Cache used characters in a bitset to reduce memory overhead to just 32 bytes.
- On my core2 this code is faster except when the checked string was very short
(smaller than the list of delimiters).
llvm-svn: 111817
functionality that most command-line tools need: ensuring that the
output file gets deleted if the tool is interrupted or encounters an
error.
llvm-svn: 111595
constructed with an output filename of "-". In particular, allow the
file descriptor to be closed, and close the file descriptor in the
destructor if it hasn't been explicitly closed already, to ensure
that any write errors are detected.
llvm-svn: 111436
(e.g. errs()) fails in close() due to (e.g.) a broken pipe. As
previously written, the had_error() flag would get set and then
the raw_ostream dtor would report a fatal error. There is nothing
the client can do about this and we have no way to report the error,
so just eat it.
llvm-svn: 111321
implementations of equality comparison and hash computation. This
can be used to optimize node lookup by avoiding creating lots of
temporary ID values just for hashing and comparison purposes.
llvm-svn: 111130
target triple and straightens it out. This does less than gcc's script
config.sub, for example it turns i386-mingw32 into i386--mingw32 not
i386-pc-mingw32, but it does a decent job of turning funky triples into
something that the rest of the Triple class can understand. The plan
is to use this to canonicalize triple's when they are first provided
by users, and have the rest of LLVM only deal with canonical triples.
Once this is done the special case workarounds in the Triple constructor
can be removed, making the class more regular and easier to use. The
comments and unittests for the Triple class are already adjusted in this
patch appropriately for this brave new world of increased uniformity.
llvm-svn: 110909
- remove ashr which never worked.
- fix lshr and shl and add tests.
- remove dead function "intersect1Wrapped".
- add a new sub method to subtract ranges, with test.
llvm-svn: 110861
- This works, but won't handle crashes on stack overflow, or signals delivered
to a thread other than the one that crashed. The latter is particular annoying
on Darwin, because SIGABRT tends to go to the main thread.
llvm-svn: 109717
- Designed as a simple wrapper to allow clients to attempt to catch crashes
(memory errors, assertion violations, etc.) and do some kind of recovery.
- Currently doesn't actually attempt to catch crashes.
llvm-svn: 109586
replaced by a bigger array in SmallPtrSet (by overridding it), instead just use a
pointer to the start of the storage, and have SmallPtrSet pass in the value to use.
This has the disadvantage that SmallPtrSet becomes bigger by one pointer. It has
the advantage that it no longer uses tricky C++ rules, and is clearly correct while
I'm not sure the previous version was. This was inspired by g++-4.6 pointing out
that SmallPtrSetImpl was writing off the end of SmallArray, which it was. Since
SmallArray is replaced with a bigger array in SmallPtrSet, the write was still to
valid memory. But it was writing off the end of the declared array type - sounds
kind of dubious to me, like it sounded dubious to g++-4.6. Maybe g++-4.6 is wrong
and this construct is perfectly valid and correctly compiled by all compilers, but
I think it is better to avoid the whole can of worms by avoiding this construct.
llvm-svn: 107285
buffer in the same chunk of memory.
2 less mallocs for every uninitialized MemoryBuffer and 1 less malloc for every
MemoryBuffer pointing to a memory range translate into 20% less mallocs on
clang -cc1 -Eonly Cocoa_h.m.
llvm-svn: 106839
switch from this:
if (TimePassesIsEnabled) {
NamedRegionTimer T(Name, GroupName);
do_something();
} else {
do_something(); // duplicate the code, this time without a timer!
}
to this:
{
NamedRegionTimer T(Name, GroupName, TimePassesIsEnabled);
do_something();
}
llvm-svn: 106285
EAGAIN and EWOULDBLOCK are used here.
Also, handle the case where a write call is interrupted after
some data has already been written.
llvm-svn: 103153
Microoptimize Twine's with unsigned and int to not pin their value to
the stack. This saves stack space in common cases and allows mem2reg
in the caller. A simple example is:
void foo(const Twine &);
void bar(int x) {
foo("xyz: " + Twine(x));
}
Before:
__Z3bari:
subq $40, %rsp
movl %edi, 36(%rsp)
leaq L_.str3(%rip), %rax
leaq 36(%rsp), %rcx
leaq 8(%rsp), %rdi
movq %rax, 8(%rsp)
movq %rcx, 16(%rsp)
movb $3, 24(%rsp)
movb $7, 25(%rsp)
callq __Z3fooRKN4llvm5TwineE
addq $40, %rsp
ret
After:
__Z3bari:
subq $24, %rsp
leaq L_.str3(%rip), %rax
movq %rax, (%rsp)
movslq %edi, %rax
movq %rax, 8(%rsp)
movb $3, 16(%rsp)
movb $7, 17(%rsp)
leaq (%rsp), %rdi
callq __Z3fooRKN4llvm5TwineE
addq $24, %rsp
ret
It saves 16 bytes of stack and one instruction in this case.
llvm-svn: 103107
We have some code in llvm and clang where a BumpPtrAllocator is declared in a
class but never used in the common case. Stop wasting memory there.
llvm-svn: 101130
- Use a RAII object to close the FD.
- Use sys::StrError instead of thread-unsafe strerror calls.
- Recover gracefully if read returns zero. This works around an issue on
DragonFlyBSD where /dev/null has an st_size of 136 but we can't read 136 bytes
from it.
llvm-svn: 100106
on all objects it has allocated, if they are all of the same size and alignment.
Use this to destruct all VNInfos allocated in LiveIntervalAnalysis (PR6653).
valnos is not reliable for this purpose, as seen in r99400
(which still leaked, and sometimes caused double frees).
llvm-svn: 99881
instead of just a count of them, and refactor the guts of
report printing out of removeTimer into its own method.
Refactor addTimerToPrint away.
llvm-svn: 99872
eliminate the per-timer lock (timers should be
externally locked if needed), the info-output-stream
can never be dbgs(), so drop the check. Make some
stuff private.
llvm-svn: 99839
BumpPtrAllocator-allocated region to allow it to be stored in a more
compact form and to avoid the need for a non-trivial destructor call.
Use this new mechanism in ScalarEvolution instead of
FastFoldingSetNode to avoid leaking memory in the case where a
FoldingSetNodeID uses heap storage, and to reduce overall memory
usage.
llvm-svn: 98829
It gets its own implementation totally divorced from the (presumably
performance-sensitive) routines which parse into a uint64_t.
Add APInt::operator|=(uint64_t), which is situationally much better than
using a full APInt.
llvm-svn: 97381
payloads. APFloat's internal folding routines always make QNaNs now,
instead of sometimes making QNaNs and sometimes SNaNs depending on the
type.
llvm-svn: 97364
The MicroBlaze is a highly configurable 32-bit soft-microprocessor for
use on Xilinx FPGAs. For more information see:
http://www.xilinx.com/tools/microblaze.htmhttp://en.wikipedia.org/wiki/MicroBlaze
The current LLVM MicroBlaze backend generates assembly which can be
compiled using the an appropriate binutils assembler.
llvm-svn: 96969
Also, have tools output -help-hidden rather than refer to --help-hidden,
for consistency, and likewise adjust documentation. This doesn't change
every mention of --help, only those which seemed clearly safe.
llvm-svn: 96578
- getToken is modeled after StringRef::split but it can split on multiple
separator chars and skips leading seperators.
- SplitString is a StringRef::split variant for more than 2 elements with the
same behaviour as getToken.
llvm-svn: 93161
cut the significand down to the desired precision *before* entering the
core divmod loop. Makes the overall algorithm logarithmic in the exponent.
There's still a lot of room for improvement here, but this gets the
performance back down to acceptable-for-diagnostics levels, even for
long doubles.
negligible, even on long doubles.
llvm-svn: 92130
smallest-normalized-magnitude values in a given FP semantics.
Provide an APFloat-to-string conversion which I am quite ready to admit could
be much more efficient.
llvm-svn: 92126
simply passes output to errs(). If -debug-buffer-size=N is set N > 0,
dbgs() buffers its output until program termination and dumps the last N
characters sent to it. This is handy when debugging very large inputs.
llvm-svn: 92002
and outputs it when explicitly flushed. The intent is to use it in
situations such as debug output logging where a signal handler can take
care of flushing the buffer at program termination.
llvm-svn: 92001
it changes raw_fd_ostream::preferred_buffer_size to return zero on
a scary stat failure instead of setting the stream to an error state.
This method really should not mutate the stream.
llvm-svn: 91740
Makes '--comma-separated val1,val2' mean the same thing as
'--comma-separated=val1,val2' (that is, 'val1' and 'val2' are not lumped
together as 'val1,val2'). Also declutters the main loop a bit.
llvm-svn: 89463
- This also fixes a dereference of std::string::end, which makes MSVC unhappy and was causing all the static analyzer clang tests to fail.
llvm-svn: 82517
static const class member into each translation unit, with external linkage???
- If someone understands this issue better, please clue me in, I haven't
consulted the standard yet.
llvm-svn: 82516
1. Change some "\n" -> '\n'.
2. eliminte some std::string's by using raw_ostream::indent.
3. move a bunch of code out of the main arg parser routine into
a new static HandlePrefixedOrGroupedOption function.
4. Greatly simplify the implementation of getOptionPred, and make
it avoid splitting prefix options at = when that doesn't match
a non-prefix option.
llvm-svn: 82362
stringref because they may not be nul terminated. For options like -Lfoo
this now avoids a O(n) temporary std::strings where N is the length of
the string after -L.
llvm-svn: 82345
working. To support this, add an is_displayed() function to raw_ostream,
and generalize Process::StandardOutIsDisplayed and friends in order to
support it.
Also, call RemoveFileOnSignal before creating a file instead of after, so
that the file isn't left behind if the program is interrupted between when
the file is created and RemoveFileOnSignal is called.
While here, add a -S to llvm-extract and port it to IRReader so that it
supports assembly input.
llvm-svn: 81568
all disassemblers.
Modified the MemoryObject to support 64-bit address
spaces, regardless of the LLVM process's address
width.
Modified the Target class to allow extraction of a
MCDisassembler.
llvm-svn: 81392
This is conventional command-line tool behavior. -f now just means
"enable binary output on terminals".
Add a -f option to llvm-extract and llvm-link, for consistency.
Remove F_Force from raw_fd_ostream and enable overwriting and
truncating by default. Introduce an F_Excl flag to permit users to
enable a failure when the file already exists. This flag is
currently unused.
Update Makefiles and documentation accordingly.
llvm-svn: 79990
means that raw_ostream no longer has to #include <iosfwd>. Nothing in llvm
should use raw_os_ostream.h, but llvm-gcc and some unit tests do.
llvm-svn: 79886
forcing them down into various .cpp files.
This change also:
1. Renames TimeValue::toString() and Path::toString() to ::str()
for similarity with the STL.
2. Removes all stream insertion support for sys::Path, forcing
clients to call .str().
3. Removes a use of Config/alloca.h from bugpoint, using smallvector
instead.
4. Weans llvm-db off <iostream>
sys::Path really needs to be gutted, but I don't have the desire to
do it at this point.
llvm-svn: 79869
- This also shortens the Format.h implementation, and uses the print buffer
fully (it was wasting a character).
- This manifested as llvm-test failures, because one side effect was that
raw_ostream would write garbage '\x00' values into the output stream if it
happened that the string was at the end of the buffer. This meant that grep
would report 'Binary file matches', which meant the silly pattern matching
llvm-test eventually does would fail. Cute. :)
llvm-svn: 79862
instead of as two bools. Use this to add a F_Append flag
which has the obvious behavior.
Other unrelated changes conflated into this patch:
1. REmove EH stuff from llvm-dis and llvm-as, the try blocks
are dead.
2. Simplify the filename inference code in llvm-as/llvm-dis,
because raw_fd_ostream does the right thing with '-'.
3. Switch machine verifier to use raw_ostream instead of ostream
(Which is the thing that needed append in the first place).
llvm-svn: 79807
right.
- This class turns out to be much more convenient to use if we do this; clients
can make sure the buffer is always big enough if they care (since our current
idiom tends to be to use a SmallString<256> for the input to this we should
generally be avoiding an unnecessary malloc).
Also, add a convenience raw_svector_ostream::str method which flushes the buffer
and returns a StringRef for the vector contents.
llvm-svn: 79446
- This avoids unnecessary malloc/free overhead in the common case, and
unnecessary copying from the ostream buffer into the output vector.
llvm-svn: 79434
- Kill off begin(), end(), and iterator. It isn't clear what these
mean. Instead provide getBufferStart(), which can be used with
GetNumBytesInBuffer to the same effect.
- Update ComputeColumn to take arguments for the buffer to scan, this
simplifies the implementation of write_impl substantially.
- This should also fix possible problems with the scanning pointer pointing
outside of the current raw_ostream buffer.
llvm-svn: 79379
allow underlying stream classes to decline buffering. After
calling SetBuffered(), re-check whether the stream is Unbuffered
in order to handle the case where the underlying stream has
declined buffering.
llvm-svn: 79362
mimic the behavior of stdtout, which is line-buffered when the output
is a terminal. This fixes some issues with bugpoint output appearing
being printed out of order.
llvm-svn: 78953
unbuffered. std::ostream does its own buffering, and std::string and
SmallVector both have allocation strategies intended to handle frequent
appending.
llvm-svn: 78924
the darwin version string. This should help consolidate
the variety of weird functions we have scattered around the
codebase that do stuff like this.
llvm-svn: 78792
just argv[0]. And remove the code for searching the current
working directory and for searching PATH; the point of FindExecutable
is not to find whatever version of the executable can be found by
searching around, but to find an executable that accompanies the
current executable.
Update the tools to use sys::Program::FindProgramByName when they
want PATH searching.
llvm-svn: 78240
This is not just a matter of passing in the target triple from the module;
currently backends are making decisions based on the build and host
architecture. The goal is to migrate to making these decisions based off of the
triple (in conjunction with the feature string). Thus most clients pass in the
target triple, or the host triple if that is empty.
This has one important change in the way behavior of the JIT and llc.
For the JIT, it was previously selecting the Target based on the host
(naturally), but it was setting the target machine features based on the triple
from the module. Now it is setting the target machine features based on the
triple of the host.
For LLC, -march was previously only used to select the target, the target
machine features were initialized from the module's triple (which may have been
empty). Now the target triple is taken from the module, or the host's triple is
used if that is empty. Then the triple is adjusted to match -march.
The take away is that -march for llc is now used in conjunction with the host
triple to initialize the subtarget. If users want more deterministic behavior
from llc, they should use -mtriple, or set the triple in the input module.
llvm-svn: 77946
- Provides static constructors for doing number to string conversions without
using temporaries.
- There are several ways to do this, I think given the Twine constraints this
is the simplest one.
- One FIXME for fast number -> hex conversion.
- Added another comment on one last major bit of perf work Twines need, which
is to make raw_svector_ostream more efficient.
llvm-svn: 77445
- This is a simplified mechanism which just looks up a target based on the
target triple, with a few additional flags.
- Remove getClosestStaticTargetForModule, the moral equivalent is now:
lookupTarget(Mod->getTargetTriple, true, false, ...);
- This no longer does the fuzzy matching with target data (based on endianness
and pointer width) that getClosestStaticTargetForModule was doing, but this
was deemed unnecessary.
llvm-svn: 77111
- Instead of requiring targets to define a JIT quality match function, we just
have them specify if they support a JIT.
- Target selection for the JIT just gets the host triple and looks for the best
target which matches the triple and has a JIT.
llvm-svn: 77060
- Yay for '-'s and simplifications!
- I kept StringMap::GetOrCreateValue for compatibility purposes, this can
eventually go away. Likewise the StringMapEntry Create functions still follow
the old style.
- NIFC.
llvm-svn: 76888
malloc, so there should be no functional changes to other code.
These changes are necessary since I have plans to use this allocator in the JIT
memory manager, and it needs a special allocator.
I also added some tests which helped me pinpoint some bugs.
llvm-svn: 76825
all values belonging to the intersection will belong to the resulting range.
The former was inconsistent about that point (either way is fine, just pick
one.) This is part of PR4545.
llvm-svn: 76289
immediately on every output error. Instead, add a flag to
raw_ostream, and set the flag whenever an error is detected.
The flag can be queried and cleared from the public API. This
gives applications more flexibility to handling errors in
application-specific ways.
If the flag is not cleared when the raw_ostream is destructed,
llvm_report_error is called from the destructor. This ensures
that errors are not implicitly silenced, and provides
convenient default behavior for tools like llc and opt.
Clients wishing to avoid llvm_report_error calls from
raw_ostream should check for errors and clear the error flag.
llvm-svn: 75857
--- Reverse-merging r75799 into '.':
U test/Analysis/PointerTracking
U include/llvm/Target/TargetMachineRegistry.h
U include/llvm/Target/TargetMachine.h
U include/llvm/Target/TargetRegistry.h
U include/llvm/Target/TargetSelect.h
U tools/lto/LTOCodeGenerator.cpp
U tools/lto/LTOModule.cpp
U tools/llc/llc.cpp
U lib/Target/PowerPC/PPCTargetMachine.h
U lib/Target/PowerPC/AsmPrinter/PPCAsmPrinter.cpp
U lib/Target/PowerPC/PPCTargetMachine.cpp
U lib/Target/PowerPC/PPC.h
U lib/Target/ARM/ARMTargetMachine.cpp
U lib/Target/ARM/AsmPrinter/ARMAsmPrinter.cpp
U lib/Target/ARM/ARMTargetMachine.h
U lib/Target/ARM/ARM.h
U lib/Target/XCore/XCoreTargetMachine.cpp
U lib/Target/XCore/XCoreTargetMachine.h
U lib/Target/PIC16/PIC16TargetMachine.cpp
U lib/Target/PIC16/PIC16TargetMachine.h
U lib/Target/Alpha/AsmPrinter/AlphaAsmPrinter.cpp
U lib/Target/Alpha/AlphaTargetMachine.cpp
U lib/Target/Alpha/AlphaTargetMachine.h
U lib/Target/X86/X86TargetMachine.h
U lib/Target/X86/X86.h
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U lib/Target/X86/AsmPrinter/X86AsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U lib/Target/X86/X86TargetMachine.cpp
U lib/Target/MSP430/MSP430TargetMachine.cpp
U lib/Target/MSP430/MSP430TargetMachine.h
U lib/Target/CppBackend/CPPTargetMachine.h
U lib/Target/CppBackend/CPPBackend.cpp
U lib/Target/CBackend/CTargetMachine.h
U lib/Target/CBackend/CBackend.cpp
U lib/Target/TargetMachine.cpp
U lib/Target/IA64/IA64TargetMachine.cpp
U lib/Target/IA64/AsmPrinter/IA64AsmPrinter.cpp
U lib/Target/IA64/IA64TargetMachine.h
U lib/Target/IA64/IA64.h
U lib/Target/MSIL/MSILWriter.cpp
U lib/Target/CellSPU/SPUTargetMachine.h
U lib/Target/CellSPU/SPU.h
U lib/Target/CellSPU/AsmPrinter/SPUAsmPrinter.cpp
U lib/Target/CellSPU/SPUTargetMachine.cpp
U lib/Target/Mips/AsmPrinter/MipsAsmPrinter.cpp
U lib/Target/Mips/MipsTargetMachine.cpp
U lib/Target/Mips/MipsTargetMachine.h
U lib/Target/Mips/Mips.h
U lib/Target/Sparc/AsmPrinter/SparcAsmPrinter.cpp
U lib/Target/Sparc/SparcTargetMachine.cpp
U lib/Target/Sparc/SparcTargetMachine.h
U lib/ExecutionEngine/JIT/TargetSelect.cpp
U lib/Support/TargetRegistry.cpp
llvm-svn: 75820
an existing file is considered an error. Convert several tools
to use raw_fd_ostream instead of std::ostream, and to use this
new option instead of doing a manual check.
llvm-svn: 75801
Targets implement a single global Target structure which will live in a new
<Target>/TargetInfo library; this will be present in any image which the target
is usable in.
- Optional target specific classes can then be registered and attached to the
Target description.
- Registration for normal Targets will be done via the initialization functions
instead of using static constructors.
- This allows clients to use a single interface to obtain target data, without
requiring the code generator be linked in. It also provides a natural
extension point for adding new optional target data (assembler parser,
disassembler, etc.).
- This also provides a new entry point for obtaining a target for a particular
triple (without a module).
- Not yet used, however this should eventually replace the TargetMachineRegistry.
llvm-svn: 75739
This adds location info for all llvm_unreachable calls (which is a macro now) in
!NDEBUG builds.
In NDEBUG builds location info and the message is off (it only prints
"UREACHABLE executed").
llvm-svn: 75640
Make llvm_unreachable take an optional string, thus moving the cerr<< out of
line.
LLVM_UNREACHABLE is now a simple wrapper that makes the message go away for
NDEBUG builds.
llvm-svn: 75379
A full set is a constant range that represents any number. If you take the
umax of that and [5, 10) you end up with [5, INT_MAX] because the values less
than 5 would be umax's against a value which is at least 5.
llvm-svn: 75372
per icmp predicate out of predsimplify and into ConstantRange.
Add another utility method that determines whether one range is a subset of
another. Combine with the former to determine whether icmp pred range, range
is known to be true or not.
llvm-svn: 75357
hooks as they're no longer needed.
The major change with this patch is to make formatted_raw_ostream usable
by any client of raw_ostream.
llvm-svn: 75283
merge the new functionality and unittests into ConstantRange. Thanks to
Nick Lewycky for pointing out that it isn't necessary to have two separate
classes here.
llvm-svn: 75191
what ConstantRange does for unsigned integers. Factor out a
common base class for common functionality.
Add some new functions for performing arithmetic on constant
ranges. Some of these are currently just stubbed out with
conservative implementations.
Add unittests for ConstantRange and ConstantSignedRange.
llvm-svn: 75177
provides a way to quickly dump a bunch of graph information to dot files
and display them. It's a timesaver when working on large systems.
llvm-svn: 75056
This will replace exit()/abort() style error handling with an API
that allows clients to register custom error handling hooks.
The default is to call exit(1) when no error handler is provided.
llvm-svn: 74922
it to print them. This gives us column numbers in the diag line. Before:
t.s:4: error: unexpected token in argument list
mov %eax %edx
^
now:
t.s:4:11: error: unexpected token in argument list
mov %eax %edx
^
llvm-svn: 74732
- Don't print "Parsing" in front of every message.
- Take additional "type" argument which is prepended to the message (with ": ")
if given.
- Update clients to print errors (warnings) as:
<filename>:<line number>: error(warning): ...
llvm-svn: 74489
- The code is silly, I'm just amusing myself. Rewrite to be efficient
if you like. :)
Also, if you wish to debate the proper names of the triple components
I'm all ears.
llvm-svn: 68252
same as a normal i80 {low64, high16} rather
than its own {high64, low16}. A depressing number
of places know about this; I think I got them all.
Bitcode readers and writers convert back to the old
form to avoid breaking compatibility.
llvm-svn: 67562
a single character requires only one branch to follow slow path.
- Never use a buffer when writing on an unbuffered stream.
- Move default buffer size to header.
llvm-svn: 67066
write as arguments.
- Add raw_ostream::GetNumBytesInBuffer.
- Privatize buffer pointers.
- Get rid of slow and unnecessary code for writing out large strings.
llvm-svn: 67060
- Flush a known non-empty buffers; enforces the interface to
flush_impl and kills off HandleFlush (which I saw no reason to be
an inline method, Chris?).
- Clarify invariant that flush_impl is only called with OutBufCur >
OutBufStart.
- This also cleary collects all places where we have to deal with the
buffer possibly not existing.
- A few more comments and fixing the unbuffered behavior remain in
this commit sequence.
llvm-svn: 67057
large for the testsuite) took over six minutes to compile on my Mac.
The patched LLVM-GCC compiles that testcase in three seconds (GCC
takes less than one second). This hash function is more complex
(about 35 instructions on x86) than what Chris wanted, but I expect it
will be well-behaved with arbitrary inputs.
Thank you to everyone who responded to my previous request for advice.
llvm-svn: 66962
feels a kinship to machine stacks that grow down. Now we get
stuff like this:
Stack dump:
0. Program arguments: clang clang_crash_Iw2Osj.mi
1. /Developer/SDKs/MacOSX10.5.sdk/usr/lib/gcc/i686-apple-darwin9/4.0.1/include/xmmintrin.h:624:1: parsing function body '_mm_cvtpi16_ps'
2. /Developer/SDKs/MacOSX10.5.sdk/usr/lib/gcc/i686-apple-darwin9/4.0.1/include/xmmintrin.h:624:1: in compound statement ('{}')
Abort
llvm-svn: 66145
Cleanup some warning.
Remark: when struct/class are declared differently than they are defined, this make problem for VC++ since it seems to mangle class differently that struct. These error are very hard to understand and find. So please, try to keep your definition/declaration in sync.
Only tested with VS2008. hope it does not break anything. feel free to revert.
llvm-svn: 64554
causing assertion failures in getSExtValue().
Fix it by making highWordBits actually contain what its name says,
and add some more unit-tests for APInt.
This fixes PR3419.
llvm-svn: 63107
DW_AT_APPLE_optimized flag is set when a compile_unit is optimized. The debugger takes advantage of this information some way.
DW_AT_APPLE_flags encodes command line options when certain env. variable is set. This is used by build engineers to track various gcc command lines used by by a project, irrespective of whether the project used makefile, Xcode or something else.
llvm-gcc patch is next.
llvm-svn: 62888
ASCII IR; loading and storing these can change the
bits of NaNs on some hosts. Remove or add warnings
at a few other places using host floating point;
this is a bad thing to do in general.
llvm-svn: 62712
instead of requiring all "short description" strings to begin with
two spaces. This makes these strings less mysterious, and it fixes
some cases where short description strings mistakenly did not
begin with two spaces.
llvm-svn: 57521
since -0.0 can't be represented as an int.
This prevents llvm from reducing -0.0 to a
load-and-convert of int 0. Fixes
ieee.exp/mzero[2356].c in gcc testsuite.
llvm-svn: 57224
are Inexact. (These are not Inexact as defined
by IEEE754, but that seems like a reasonable way
to abstract what happens: information is lost.)
llvm-svn: 57218
use raw_ostream instead of std::ostream. Among other goodness,
this speeds up llvm-dis of kc++ with a release build from 0.85s
to 0.49s (88% faster).
Other interesting changes:
1) This makes Value::print be non-virtual.
2) AP[S]Int and ConstantRange can no longer print to ostream directly,
use raw_ostream instead.
3) This fixes a bug in raw_os_ostream where it didn't flush itself
when destroyed.
4) This adds a new SDNode::print method, instead of only allowing "dump".
A lot of APIs have both std::ostream and raw_ostream versions, it would
be useful to go through and systematically anihilate the std::ostream
versions.
This passes dejagnu, but there may be minor fallout, plz let me know if
so and I'll fix it.
llvm-svn: 55263
all the power and risk of fprintf format strings. Use them like this:
OS << format("%10.4f", 42.0) << "\n" << format("%x", 42) << '\n';
llvm-svn: 55246
returning an std::string by value, it fills in a SmallString/SmallVector
passed in. This significantly reduces string thrashing in some cases.
More specifically, this:
- Adds an operator<< and a print method for APInt that allows you to
directly send them to an ostream.
- Reimplements APInt::toString to be much simpler and more efficient
algorithmically in addition to not thrashing strings quite as much.
This speeds up llvm-dis on kc++ by 7%, and may also slightly speed up the
asmprinter. This also fixes a bug I introduced into the asmwriter in a
previous patch w.r.t. alias printing.
llvm-svn: 54873
can *only* output data (no seeking, reading, etc). This is adapted from the
clang "-E outputter", and is roughly 10% faster than stdio on darwin and 30%
(or more) faster than std::ostream.
llvm-svn: 54855
a new ilist_node class, and remove them. Unlike alist_node,
ilist_node doesn't attempt to manage storage itself, so it avoids
the associated problems, including being opaque in gdb.
Adjust the Recycler class so that it doesn't depend on alist_node.
Also, change it to use explicit Size and Align parameters, allowing
it to work when the largest-sized node doesn't have the greatest
alignment requirement.
Change MachineInstr's MachineMemOperand list from a pool-backed
alist to a std::list for now.
llvm-svn: 54146
for handling bookkeeping for deleted objects, as well as the alist class
template, for keeping lists of objects allocated from Recyclers, and some
related utilities.
llvm-svn: 53210
of after, so that any reallocation it does doesn't get counted for the pass
being timed. This probably doesn't account for a timing discrepancy I was
looking into, but I'm fixing it anyway.
llvm-svn: 52693
multiplicative inverse of a given number. Modify udivrem to allow input and
output pairs of arguments to overlap. Patch is based on the work by Chandler
Carruth.
llvm-svn: 52638
over-shift-right should return -1. So here it should be signed-extended,
when bitwidth larger than 64.
test case: llvm/test/ExecutionEngine/2008-06-05-APInt-OverAShr.ll
llvm-svn: 51999
ppc long double, which doesn't work.
This may break some stuff temporarily, but I want to
avoid the propagation of code that assumes this works.
llvm-svn: 49983
start of a filename, not a filename+length. All clients can produce a
null terminated name, and the system api's require null terminated
strings anyway.
llvm-svn: 49041
1) stop using MappedFile.
2) if profitable use the sys::path::MapInFilePages api to
read the file.
3) otherwise fallback to read.
When sys::path::MapInFilePages is implemented, this provides
several benefits:
#1: this avoids fragmenting memory for small files.
#2: this avoids extraneous stat calls when the file size is known.
#3: this only keeps the file descriptor open while reading the
file, not for the duration of the lifetime of the memory
buffer. This fixes a serious clang FD 'leak' problem.
I believe that this will work on a win32 machine, but I don't have
one to test on. I'd appreciate it if someone could check.
llvm-svn: 49031
not an mmapped file. This more closely matches its requirements and
provides an implicitly null terminated buffer, something this
routine had to emulate itself before.
llvm-svn: 49024
Added member template "Add" to FoldingSetNodeID that allows "adding" arbitrary
objects to a profile via dispatch to FoldingSetTrait<T>::Profile().
Removed FoldingSetNodeID::AddAPFloat and FoldingSetNodeID::APInt, as their
functionality is now replaced using the above mentioned member template.
llvm-svn: 46957
'FoldingSetNodeImpl' (previously 'FoldingSetNodeID' was a typedef of
'FoldingSetNodeImpl::NodeID').
Why? Clients can now easily forward declare 'FoldingSetNodeID' without having
to include FoldingSet.h.
llvm-svn: 46187
memory rather than in a copy of the APFloat. This avoids problems
when the destination is wider than our significand and is cleaner.
Also provide deterministic values in all cases where conversion
fails, namely zero for NaNs and the minimal or maximal value
respectively for underflow or overflow.
llvm-svn: 43626
Ahmed Bougacha