Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Address undefined-var-template warning.
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269694
Actually use the error return path rather than printing the duplicate
information then a separate error. But also just tidy up/deduplicate
some of the code for generating the diagnostic text.
llvm-svn: 269692
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Reapplied after fixing the LLDB build that was broken due to the new
DiagnosticSeverity in LLVMContext.h, and fixed an UB in the new change.
Patch by Diana Picus.
llvm-svn: 269655
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Reapplied after fixing the LLDB build that was broken due to the new
DiagnosticSeverity in LLVMContext.h.
Patch by Diana Picus.
llvm-svn: 269563
This reverts commit r269538 and r269542.
"rename()" is expected to fail across filesystems, will handle this.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 269543
Summary:
This code is intended to be used as part of LLD's PDB writing. Until
that exists, this is exposed via llvm-readobj for testing purposes.
Type stream merging uses the following algorithm:
- Begin with a new empty stream, and a new empty hash table that maps
from type record contents to new type index.
- For each new type stream, maintain a map from source type index to
destination type index.
- For each record, copy it and rewrite its type indices to be valid in
the destination type stream.
- If the new type record is not already present in the destination
stream hash table, append it to the destination type stream, assign it
the next type index, and update the two hash tables.
- If the type record already exists in the destination stream, discard
it and update the type index map to forward the source type index to
the existing destination type index.
Reviewers: zturner, ruiu
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20122
llvm-svn: 269521
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269491
Publics stream seems to contain information as to public symbols.
It actually contains a serialized hash table along with fixed-sized
headers. This patch is not complete. It scans only till the end of
the stream and dump the header information. I'll write code to
de-serialize the hash table later.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20256
llvm-svn: 269484
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269462
This patch adds basic support for MachO::load_command. Load command types and sizes are encoded in the YAML and expanded back into MachO.
The YAML doesn't yet support load command structs, that is coming next. In the meantime as a temporary measure when writing MachO files the load commands are padded with zeros so that the generated binary is valid.
llvm-svn: 269442
This reverts commit r269428, as it breaks the LLDB build. We need to
understand how to change LLDB in the same way as LLC before landing this
again.
llvm-svn: 269432
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Patch by Diana Picus.
llvm-svn: 269428
This change is the gold side of the change made in D17115 and clang
patch r261045 to add a ThinLTO specific pipeline that moves more of
the optimization to the backends.
llvm-svn: 269386
In verbose mode, we emit a warning if the DWOId of a skeleton CU
mismatches the DWOId of the referenced module. This patch updates the
cached DWOId after a module has been loaded to the DWOId of the module
on disk (instead of storing the DWOId we expected to load). This
allows us to correctly emit the mismatch warning for all subsequent
object files that want to import the same module. This patch also
ensures both warnings are only emitted in verbose mode.
rdar://problem/26214027
llvm-svn: 269383
I've added the reserved field as an "optional" in YAML, but I've added asserts in the yaml2macho code to enforce that the field is present in mach_header_64, but not in mach_header.
llvm-svn: 269320
This introduces a variadic template and some helper macros to
safely and correctly deserialize many types of common record
fields while maintaining error checking.
Differential Revision: http://reviews.llvm.org/D20183
Reviewed By: rnk, amccarth
llvm-svn: 269315
Since we want to be able to use yaml to describe degenerate object files as well as valid ones, we need to be explicit of some fields in your yaml definitions.
llvm-svn: 269313
This patch adds the ability to dump mach headers. For my local clang binary the macho2yaml output is now:
--- !mach-o
FileHeader:
cputype: 0x01000007
cpusubtype: 0x80000003
filetype: 0x00000002
ncmds: 19
flags: 0x00A18085
...
llvm-svn: 269304
Adding the initial files for adding MachO support to yaml2obj. Passing a MachO file will result in an error.
I will be implementing obj2yaml and yaml2obj for MachO in parallel so that one can be used to test the other.
llvm-svn: 269244
Adding the initial files for adding MachO support to obj2yaml. Passing a MachO file will result in a new not_implemented error.
I will be implementing obj2yaml and yaml2obj for MachO in parallel so that one can be used to test the other.
llvm-svn: 269243
Summary:
Add support for emission of plaintext lists of the imported files for
each distributed backend compilation. Used for distributed build file
staging.
Invoked with new gold-plugin thinlto-emit-imports-files option, which is
only valid with thinlto-index-only (i.e. for distributed builds), or
from llvm-lto with new -thinlto-action=emitimports value.
Depends on D19556.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19636
llvm-svn: 269067
This restores commit r268627:
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
...
Differential Revision: http://reviews.llvm.org/D19556
Address msan failures by avoiding std::prev on map.end(), the
theory is that this is causing issues due to some known UB problems
in __tree.
llvm-svn: 269059
In -run-pass mode verify/print machine function immediately after
loading the .mir file if -verify-machineinstr/-print-machineinstrs
option is specified.
llvm-svn: 269014
Many files include Passes.h but only a fraction needs to know about the
TargetPassConfig class. Move it into an own header. Also rename
Passes.cpp to TargetPassConfig.cpp while we are at it.
llvm-svn: 269011
Looks like you need the complete definition of "X" when calling a "X
&func()" declared function even when not using the result further.
llvm-svn: 269006
We now construct a custom pass pipeline instead of injecting
start-before/stop-after into the default pipeline construction. This
allows to specify any pass known to the pass registry. Previously
specifying indirectly added analysis passes or passes not added to the
pipeline add all would not be added and we would silently do nothing.
This also restricts the -run-pass option to cases with .mir input.
llvm-svn: 269003
The BinaryHolder would query the archive member MemoryBuffer name
to check if the current open archive also contains the next requested
objectfile. This comparison was using a StringRef to a temporary
buffer. It only happened with fat archives. This commit adds long-lived
storage along with the MemoryBuffers for the fat archive filename.
The added test would fail during an ASAN build without the fix.
llvm-svn: 268924
When updating an existing archive, llvm-ar opens the old archive into a
`MemoryBuffer`, does its thing, and writes the results to a temporary
file. That file is then renamed to the original archive filename, thus
replacing it with the updated contents. However, on Windows at least,
what would happen is that the `MemoryBuffer` for the old archive would
actually be an mmap'ed view of the file, so when it came time to do the
rename via Win32's `ReplaceFile`, it would succeed but would be unable
to fully replace the file since there would still be a handle open on
it; instead, the old version got renamed to a random temporary name and
left behind.
Patch by Cameron!
llvm-svn: 268916
r267249 removed the dual ARM/Thumb interface from MachOObjectFile,
simplifying llvm-dsymutil's code. This unfortunately also regressed
llvm-dsymutil's ability to select thumb slices, because the simplified
code was also dealing with the discrepency between the slice arch
(eg. armv7m) and the triple arch name (eg. thumbv7m).
llvm-svn: 268894
This reuses the CVTypeDumper from libcodeview to dump full
information about type records within a PDB file.
Differential Revision: http://reviews.llvm.org/D20022
Reviewed By: rnk
llvm-svn: 268808
load commands.
The existing test case in test/Object/macho-invalid.test for
macho-invalid-too-small-segment-load-command has a cmdsize of 55, while
being too small also it is not a multiple of 4. So when that check is added
this test case will produce a different error. So I constructed a new test case
that will trigger the intended error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages which prints the load command index. I also removed both
object_error::macho_load_segment_too_small and
object_error::macho_load_segment_too_many_sections from Object/Error.h
as they are not needed and can just use object_error::parse_failed and let the
error message string distinguish the specific error.
llvm-svn: 268652
ThinLTO is using the Module Identifier to find the corresponding entry
in the index. However when reproducing part of the flow from temporary
files generated from the linker, you'd like to process a file and
force llvm-lto to use another module identifier than the current
filename. The alternative would be to tweak the index, which would be
more involved.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268643
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
The individual index file encodes the summary and module information
required for implementing the importing/exporting decisions made
for a given module in the thin link step.
This is in place of the current mechanism that uses the combined index
to make importing decisions in each back end independently. It is an
enabler for doing global summary based optimizations in the thin link
step (which will be recorded in the individual index files), and reduces
the size of the index that must be sent to each backend process, and
the amount of work to scan it in the backends.
Rather than create entirely new ModuleSummaryIndex structures (and all
the included unique_ptrs) for each backend index file, a map is created
to record all of the GUID and summary pointers needed for a particular
index file. The IndexBitcodeWriter walks this map instead of the full
index (hiding the details of managing the appropriate summary iteration
in a new iterator subclass). This is more efficient than walking the
entire combined index and filtering out just the needed summaries during
each backend bitcode index write.
Depends on D19481.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19556
llvm-svn: 268627
Summary:
Port the dumper in llvm-readobj over to it.
I'm planning to use this visitor to power type stream merging.
While we're at it, try to switch from StringRef to ArrayRef<uint8_t> in some
places.
Reviewers: zturner, amccarth
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19899
llvm-svn: 268535
When printing raw PDB file fields, streams, and records, use the
ScopedPrinter class so we have consistency with llvm-readobj's output
format.
For the most part this is pretty mechanical, but I had to fix up the test
file to conform to the new YAMLesque output format. i added a few
additional helper functions to the ScopedPrinter such as one to print a
dotted version, etc.
Differential Revision: http://reviews.llvm.org/D19897
Reviewed By: rnk
llvm-svn: 268506
.MIPS.options section specifies miscellaneous options to be applied
to an object file. LLVM as well as modern versions of GNU tools emit
the only type of the options - ODK_REGINFO. The patch teaches llvm-readobj
to print details of the ODK_REGINFO and skip contents of other options.
llvm-svn: 268478
We forgot to consider the target of ifuncs when considering if a
function was alive or dead.
N.B. Also update a few auxiliary tools like bugpoint and
verify-uselistorder.
This fixes PR27593.
llvm-svn: 268468
Ability to parse codeview type streams is also needed by
DebugInfoPDB for parsing PDBs, so moving this into a library
gives us this option. Since DebugInfoPDB had already hand
rolled some code to do this, that code is now convereted over
to using this common abstraction.
Differential Revision: http://reviews.llvm.org/D19887
Reviewed By: dblaikie, amccarth
llvm-svn: 268454
This parses the TPI stream (stream 2) from the PDB file. This stream
contains some header information followed by a series of codeview records.
There is some additional complexity here in that alongside this stream of
codeview records is a serialized hash table in order to efficiently query
the types. We parse the necessary bookkeeping information to allow us to
reconstruct the hash table, but we do not actually construct it yet as
there are still a few things that need to be understood first.
Differential Revision: http://reviews.llvm.org/D19840
Reviewed By: ruiu, rnk
llvm-svn: 268343
We wish to re-use this from llvm-pdbdump, and it provides a nice
way to print structured data in scoped format that could prove
useful for many other dumping tools as well. Moving to support
and changing name to ScopedPrinter to better reflect its purpose.
llvm-svn: 268342
This is a small refactoring step toward moving CodeView type stream logic from llvm-readobj to a library. It abstracts the logic of stepping through the stream into an iterator class and updates llvm-readobj to use that iterator. This has no functional change; llvm-readobj produces identical output.
The next step is to abstract the parsing of the different leaf types and then move that and the iterator into a library.
Since this is my first contrib outside LLDB, please let me know if I'm messing up on any of the LLVM style guidelines, idioms, or patterns.
Differential Revision: http://reviews.llvm.org/D19746
llvm-svn: 268334
llvm-dsymutil used to create the temporary files in the output directory.
This works fine except when the output directory contains a '%' char, which
is then replaced by llvm::sys::fs::createUniqueFile() generating an invalid
path.
Just use the default temp dir for those files.
llvm-svn: 268304
This isolates the state we use for type dumping from the knowledge of
object files. We can use CVTypeDumper to dump types from anywhere in
memory now.
NFC
Reviewers: zturner
Differential Revision: http://reviews.llvm.org/D19824
llvm-svn: 268300
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
PDB has a lot of similar data structures. We already have code
for parsing a Name Map, but PDB seems to have a different but
very similar structure that is a hash table. This is the
beginning of code needed in order to parse the name hash table,
but it is not yet complete. It parses the basic metadata of
the hash table, the bucket array, and the names buffer, but
doesn't use any of these fields yet as the data structure
requires a non-trivial amount of work to understand.
llvm-svn: 268268
This adds a new target `install-distribution-toolchain` which will install an Xcode toolchain featuring just the LLVM components specified in LLVM_DISTRIBUTION_COMPONENTS.
llvm-svn: 268125
The motivation for this change is that PDB has the notion of
streams and substreams. Substreams often consist of variable
length structures that are convenient to be able to treat as
guaranteed, contiguous byte arrays, whereas the streams they
are contained in are not necessarily so, as a single stream
could be spread across many discontiguous blocks.
So, when processing data from a substream, we want to be able
to assume that we have a contiguous byte array so that we can
cast pointers to variable length arrays and such.
This leads to the question of how to be able to read the same
data structure from either a stream or a substream using the
same interface, which is where this patch comes in.
We separate out the stream's read state from the underlying
representation, and introduce a `StreamReader` class. Then
we change the name of `PDBStream` to `MappedBlockStream`, and
introduce a second kind of stream called a `ByteStream` which is
simply a sequence of contiguous bytes. Finally, we update all
of the std::vectors in `PDBDbiStream` to use `ByteStream` instead
as a proof of concept.
llvm-svn: 268071
This is the second try. This time we disable this feature if no Polly checkout
is available. For this to work we need to check if tools/polly is present
early enough that our decision is known before cmake generates Config/config.h.
With Polly checked into LLVM it was since a long time possible to compile
clang/opt/bugpoint with Polly support directly linked in, instead of only
providing Polly as a separate loadable module. This commit switches the
default from providing Polly as a module to linking Polly into tools, such
that it becomes unnecessary to load the Polly module when playing with Polly.
Such configuration has shown a lot more convenient for day-to-day Polly use.
This change does not impact the default behavior of any tool, if Polly is not
explicitly enabled when calling clang/opt/bugpoint Polly does not affect
compilation.
This change also does not impact normal LLVM/clang checkouts that do not
contain Polly.
Reviewers: jdoerfert, Meinersbur
Subscribers: pollydev, llvm-commits
Differential Revision: http://reviews.llvm.org/D19711
llvm-svn: 268048
We now read out the rest of the substreams from the DBI streams. One of
these substreams, the FileInfo substream, contains information about which
source files contribute to each module (aka compiland). This patch
additionally parses out the file information from that substream, and
dumps it in llvm-pdbdump.
Differential Revision: http://reviews.llvm.org/D19634
Reviewed by: ruiu
llvm-svn: 267928
Two problems, 1) for the last 4 bytes it would print them as separate bytes not a word
and 2) it would print the same last byte for those bytes less than a word.
rdar://25938224
llvm-svn: 267819
This gets more data out of the DBI strema of the PDB. In
particular it extracts the metadata for the list of modules
(compilands) that this PDB contains info about, and adds support
for dumping these fields to llvm-pdbdump.
Differential Revision: http://reviews.llvm.org/D19570
Reviewed By: ruiu
llvm-svn: 267818
Summary:
This is a hook to allow TargetMachine to install passes at the
EP_EarlyAsPossible PassManagerBuilder extension point.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18614
llvm-svn: 267763
Summary:
With the removal of support for lazy parsing of combined index summary
records (e.g. r267344), we no longer need to include the summary record
bitcode offset in the VST entries for definitions. Change the combined
index format to be similar to the per-module index format in using value
ids to cross-reference from the summary record to the VST entry (rather
than the summary record bitcode offset to cross-reference in the other
direction).
The visible changes are:
1) Add the value id to the combined summary records
2) Remove the summary offset from the combined VST records, which has
the following effects:
- No longer need the VST_CODE_COMBINED_GVDEFENTRY record, as all
combined index VST entries now only contain the value id and
corresponding GUID.
- No longer have duplicate VST entries in the case where there are
multiple definitions of a symbol (e.g. weak/linkonce), as they all
have the same value id and GUID.
An implication of #2 above is that in order to hook up an alias to the
correct aliasee based on the value id of the aliasee recorded in the
combined index alias record, we need to scan the entries in the index
for that GUID to find the one from the same module (i.e. the case where
there are multiple entries for the aliasee). But the reader no longer
has to maintain a special map to hook up the alias/aliasee.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19481
llvm-svn: 267712
The DBI stream contains a lot of bookkeeping information for other
streams. In particular it contains information about section contributions
and linked modules. This patch is a first attempt at parsing some of the
information out of the DBI stream. It currently only parses and dumps the
headers of the DBI stream, so none of the module data or section
contribution data is pulled out.
This is just a proof of concept that we understand the basic properties of
the DBI stream's metadata, and followup patches will try to extract more
detailed information out.
Differential Revision: http://reviews.llvm.org/D19500
Reviewed By: majnemer, ruiu
llvm-svn: 267585
Autoconf used to support setting LLVM_VERSION_INFO and there is some code filtered around llvm in Support/CommandLine.cpp and LTO/LTOCodeGenerator.cpp that uses it if it is set.
We also shouldn't be explicitly setting it as a define on llvm-shlib. It is pointless there because there is no code using it in llvm-shlib, and it is better to have it as part of the generated config.h so that it is available everywhere.
llvm-svn: 267490
This replaces use of std::error_code and ErrorOr in the ORC RPC support library
with Error and Expected. This required updating the OrcRemoteTarget API, Client,
and server code, as well as updating the Orc C API.
This patch also fixes several instances where Errors were dropped.
llvm-svn: 267457
Fix early exit from linkInModule. IRMover::move returns false on
success and true on error.
Add a few more cases of merged common linkage variables with
different sizes and alignments.
llvm-svn: 267437
Until PR27449 (https://llvm.org/bugs/show_bug.cgi?id=27449) is fixed in
clang this warning is pointless, since ASTFileSignatures will change
randomly when a module is rebuilt.
rdar://problem/25610919
llvm-svn: 267427
Keeping as much as possible internal/private is
known to help the optimizer. Let's try to benefit from
this in ThinLTO.
Note: this is early work, but is enough to build clang (and
all the LLVM tools). I still need to write some lit-tests...
Differential Revision: http://reviews.llvm.org/D19103
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 267317
Summary:
As discussed in D18298, some local globals can't
be renamed/promoted (because they have a section, or because
they are referenced from inline assembly).
To be able to detect naming collision, we need to keep around
the "GUID" using their original name without taking the linkage
into account.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19454
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 267304
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
llvm-svn: 267296
Summary:
This removes a couple of flags added to control this behavior, and
simply keeps all value names when save-temps is specified.
Reviewers: rafael
Subscribers: llvm-commits, pcc, davide
Differential Revision: http://reviews.llvm.org/D19384
llvm-svn: 267279
Before we printed a warning to stderr and left the actual output stream in a
mess. This tries to print a .long or .short representation of what we saw (as
if there was a data-in-code directive).
This isn't guaranteed to restore synchronization in Thumb-mode (if the invalid
instruction was supposed to be 32-bits, we may be off-by-16 for the rest of the
function). But there's no certain way to deal with that, and it's invalid code
anyway (if the data really wasn't an instruction, the user can add proper
.data_in_code directives if they care)
llvm-svn: 267250
Only one consumer (llvm-objdump) actually cared about the fact that there were
two triples. Others were actively working around the fact that the Triple
returned by getArch might have been invalid. As for llvm-objdump, it needs to
be acutely aware of both Triples anyway, so being generic in the exposed API is
no benefit.
Also rename the version of getArch returning a Triple. Users were having to
pass an unwanted nullptr to disambiguate the two, which was nasty.
The only functional change here is that armv7m and armv7em object files no
longer crash llvm-objdump.
llvm-svn: 267249
I'm for some reason having a problem producing a test.
It should be the same as test/MC/X86/invalid_opcode.s,
but llvm-mc seems to ignore random bytes.
llvm-svn: 267225
This intrinsic takes two arguments, ``%ptr`` and ``%offset``. It loads
a 32-bit value from the address ``%ptr + %offset``, adds ``%ptr`` to that
value and returns it. The constant folder specifically recognizes the form of
this intrinsic and the constant initializers it may load from; if a loaded
constant initializer is known to have the form ``i32 trunc(x - %ptr)``,
the intrinsic call is folded to ``x``.
LLVM provides that the calculation of such a constant initializer will
not overflow at link time under the medium code model if ``x`` is an
``unnamed_addr`` function. However, it does not provide this guarantee for
a constant initializer folded into a function body. This intrinsic can be
used to avoid the possibility of overflows when loading from such a constant.
Differential Revision: http://reviews.llvm.org/D18367
llvm-svn: 267223
r267049 broke multiple buildbots (e.g. clang-cmake-mips, and clang-x86_64-linux-selfhost-modules) which the follow-ups have not yet resolved and this is preventing subsequent committers from being notified about additional failures on the affected buildbots.
llvm-svn: 267148
PDB parsing code was hand-rolled into llvm-pdbdump. This patch moves the
parsing of this code into DebugInfoPDB and makes the dumper use this.
This is achieved by implementing the skeleton of RawPdbSession, the
non-DIA counterpart to the existing PDB read interface. None of the type /
source file / etc information is accessible yet, so this implementation is
not yet close to achieving parity with the DIA counterpart, but the
RawSession class simply holds a reference to a PDBFile class which handles
parsing the file format. Additionally a PDBStream class is introduced
which allows accessing the bytes of a particular stream in a PDB file.
Differential Revision: http://reviews.llvm.org/D19343
Reviewed By: majnemer
llvm-svn: 267049
Showed up in running on a large binary with the missing section. I could create a fake
test case if anyone really wants but the fix is pretty obvious.
rdar://25837034
llvm-svn: 267037
Summary:
The function importer already decided what symbols need to be pulled
in. Also these magically added ones will not be in the export list
for the source module, which can confuse the internalizer for
instance.
Reviewers: tejohnson, rafael
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19096
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266948
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
llvm-svn: 266919
This restores r266871 with a fix for gold tests relying on the value
names, when using a release compiler, by adding a way to disable the
default discarding. Update affected tests to use the new mechanism so
that value names are preserved as expected, regardless of how the
compiler was built.
llvm-svn: 266881
Summary:
This patch prevents importing from (and therefore exporting from) any
module with a "llvm.used" local value. Local values need to be promoted
and renamed when importing, and their presense on the llvm.used variable
indicates that there are opaque uses that won't see the rename. One such
example is a use in inline assembly.
See also the discussion at:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098047.html
As part of this, move collectUsedGlobalVariables out of Transforms/Utils
and into IR/Module so that it can be used more widely. There are several
other places in LLVM that used copies of this code that can be cleaned
up as a follow on NFC patch.
Reviewers: joker.eph
Subscribers: pcc, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18986
llvm-svn: 266877
This reverts commit r266871. Setting the default based on the NDEBUG
flag is causing test failures. Need to figure out whether to change this
approach or update tests.
llvm-svn: 266872
Summary:
Applies Mehdi's optimization (r263086) to disable value names other than
for GlobalValues to LTO/ThinLTO performed via the gold-plugin, in the
same manner as it is applied in libLTO.
Reviewers: rafael, joker-eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19269
llvm-svn: 266871
Summary:
This is a follow-on to apply Duncan's new DIType ODR uniquing from
r266549 and r266713 in more places.
Enable enableDebugTypeODRUniquing() for ThinLTO backends invoked via
libLTO, similar to the way r266549 enabled this for ThinLTO backend
threads launched from gold-plugin.
Also enable enableDebugTypeODRUniquing in opt, similar to the way
r266549 enabled this for llvm-link (on by default, can be disabled with
new -disable-debug-info-type-map option), since we may perform ThinLTO
importing from opt.
Reviewers: dexonsmith, joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19263
llvm-svn: 266746
As per David's review, rename everything in the new API for ODR type
uniquing of debug info.
ensureDITypeMap => enableDebugTypeODRUniquing
destroyDITypeMap => disableDebugTypeODRUniquing
hasDITypeMap => isODRUniquingDebugTypes
llvm-svn: 266713
The fast register-allocator cannot cope with inter-block dependencies without
spilling. This is fine for ldrex/strex loops coming from atomicrmw instructions
where any value produced within a block is dead by the end, but not for
cmpxchg. So we lower a cmpxchg at -O0 via a pseudo-inst that gets expanded
after regalloc.
Fortunately this is at -O0 so we don't have to care about performance. This
simplifies the various axes of expansion considerably: we assume a strong
seq_cst operation and ensure ordering via the always-present DMB instructions
rather than v8 acquire/release instructions.
Should fix the 32-bit part of PR25526.
llvm-svn: 266679
Three problems:
1. <future> can't be easily used. If you must use it, see
include/Support/ThreadPool.h for how.
2. constexpr problems, even after 266588.
3. Move assignment operators can't be defaulted in MSVC2013.
llvm-svn: 266615
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
asynchronous call/handle. Also updates the ORC remote JIT API to use the new
scheme.
The previous version of the RPC tools only supported void functions, and
required the user to manually call a paired function to return results. This
patch replaces the Procedure typedef (which only supported void functions) with
the Function typedef which supports return values, e.g.:
Function<FooId, int32_t(std::string)> Foo;
The RPC primitives and channel operations are also expanded. RPC channels must
support four new operations: startSendMessage, endSendMessage,
startRecieveMessage and endRecieveMessage, to handle channel locking. In
addition, serialization support for tuples to RPCChannels is added to enable
multiple return values.
The RPC primitives are expanded from callAppend, call, expect and handle, to:
appendCallAsync - Make an asynchronous call to the given function.
callAsync - The same as appendCallAsync, but calls send on the channel when
done.
callSTHandling - Blocking call for single-threaded code. Wraps a call to
callAsync then waits on the result, using a user-supplied
handler to handle any callbacks from the remote.
callST - The same as callSTHandling, except that it doesn't handle
callbacks - it expects the result to be the first return.
expect and handle - as before.
handleResponse - Handle a response from the remote.
waitForResult - Wait for the response with the given sequence number to arrive.
llvm-svn: 266581
Rather than relying on the structural equivalence of DICompositeType to
merge type definitions, use an explicit map on the LLVMContext that
LLParser and BitcodeReader consult when constructing new nodes.
Each non-forward-declaration DICompositeType with a non-empty
'identifier:' field is stored/loaded from the type map, and the first
definiton will "win".
This map is opt-in: clients that expect ODR types from different modules
to be merged must call LLVMContext::ensureDITypeMap.
- Clients that just happen to load more than one Module in the same
LLVMContext won't magically merge types.
- Clients (like LTO) that want to continue to merge types based on ODR
identifiers should opt-in immediately.
I have updated LTOCodeGenerator.cpp, the two "linking" spots in
gold-plugin.cpp, and llvm-link (unless -disable-debug-info-type-map) to
set this.
With this in place, it will be straightforward to remove the DITypeRef
concept (i.e., referencing types by their 'identifier:' string rather
than pointing at them directly).
llvm-svn: 266549
To be able to work accurately on the reference graph when taking
decision about internalizing, promoting, renaming, etc. We need
to have the alias information explicit.
Differential Revision: http://reviews.llvm.org/D18836
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266517
At the same time, fixes InstructionsTest::CastInst unittest: yes
you can leave the IR in an invalid state and exit when you don't
destroy the context (like the global one), no longer now.
This is the first part of http://reviews.llvm.org/D19094
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266379
Summary:
To be able to work accurately on the reference graph when taking decision
about internalizing, promoting, renaming, etc. We need to have the alias
information explicit.
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18836
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266214
Summary:
Let keep llvm-as "dumb": it converts textual IR to bitcode. This
commit removes the dependency from llvm-as to libLLVMAnalysis.
We'll add back summary in llvm-as if we get to a textual
representation for it at some point. In the meantime, opt seems
like a better place for that.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19032
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266131
We were incorrectly reporting all non-64 bit integers as int64s.
This is most evident when trying to print the "short" type, but
in theory could happen with chars too (although usually chars use
a different builtin type).
Additionally, we were using the wrong check when deciding whether
to print an enum definition as a global enum. We were checking
whether or not the enum was "nested", and if so saving it until
we print the class definition that it was nested in. But this is
not correct in rare situations where the enum is nested, but the
class that it's nested in does not have type information in the PDB.
So instead we check if there is a class definition for the parent
in the PDB. If so we save it for later, otherwise we print it.
llvm-svn: 265993
Summary:
This is the first step in also serializing the index out to LLVM
assembly.
The per-module summary written to bitcode is moved out of the bitcode
writer and to a new analysis pass (ModuleSummaryIndexWrapperPass).
The pass itself uses a new builder class to compute index, and the
builder class is used directly in places where we don't have a pass
manager (e.g. llvm-as).
Because we are computing summaries outside of the bitcode writer, we no
longer can use value ids created by the bitcode writer's
ValueEnumerator. This required changing the reference graph edge type
to use a new ValueInfo class holding a union between a GUID (combined
index) and Value* (permodule index). The Value* are converted to the
appropriate value ID during bitcode writing.
Also, this enables removal of the BitWriter library's dependence on the
Analysis library that was previously required for the summary computation.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18763
llvm-svn: 265941
Sample-based profiling and optimization remarks currently remove
DICompileUnits from llvm.dbg.cu to suppress the emission of debug info
from them. This is somewhat of a hack and only borderline legal IR.
This patch uses the recently introduced NoDebug emission kind in
DICompileUnit to achieve the same result without breaking the Verifier.
A nice side-effect of this change is that it is now possible to combine
NoDebug and regular compile units under LTO.
http://reviews.llvm.org/D18808
<rdar://problem/25427165>
llvm-svn: 265861
Reenable reverted r265550 with endianness issue fixed. Variables of
endian-aware types such as ulittle32_t should be explicitly casted
to their natural equivalent types before passing it as vararg to
printf like functions (format in my case). Added lit config file
depending on AMDGPU target as the testcase uses assembler.
Differential revision: http://reviews.llvm.org/D16998
llvm-svn: 265645
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
This reverts commit r265550. There're problems with endianness on dumping instruction bytes. Need to find out how to use support::ulittle32_t type properly.
llvm-svn: 265554
Some Include What You Use suggestions were used too.
Use anonymous namespaces in source files.
Differential revision: http://reviews.llvm.org/D18778
llvm-svn: 265454
To start with, handle DW_FORM_string names. Follow up commit will handle
the interesting quirk with type units I was originally aiming for here.
llvm-svn: 265452
Remove a default parameter value being passed unnecessarily, which
also reduces the changes required when this parameter is changed in
D18763.
Document the remaining non-default bool value passed for another
parameter.
llvm-svn: 265348
Support seeding a ValueMap with nullptr for Metadata entries, a
situation I didn't consider in the Metadata/Value split.
I added a ValueMapper::getMappedMD accessor that returns an
Optional<Metadata*> with the mapped (possibly null) metadata. IRMover
needs to use this to avoid modifying the map when it's checking for
unneeded subprograms. I updated a call from bugpoint since I find the
new code clearer.
llvm-svn: 265228
This allows the linker to instruct ThinLTO to perform only the
optimization part or only the codegen part of the process.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265113
This is intended to be used for ThinLTO incremental build.
Differential Revision: http://reviews.llvm.org/D18213
This is a recommit of r265095 after fixing the Windows issues.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265111
This reverts commit r265096, r265095, and r265094.
Windows build is broken, and the validation does not pass.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265102
This is intended to be used for ThinLTO incremental build.
Differential Revision: http://reviews.llvm.org/D18213
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265095
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/nm.html .
1) For Mach-O files the code was not printing the values in hex as is the default.
2) The values printed had leading zeros which they should not have.
3) The address for undefined symbols was printed as spaces instead of 0.
4) With the -A option with posix output for an archive did not use square
brackets around the archive member name.
rdar://25311883 and rdar://25299678
llvm-svn: 264778
Personality is copied as part of copyFunctionAttributes, but it is
invalid on a declaration. Remove the personality attribute it the
function body is not cloned.
Also add a verifier run over output modules in the llvm-split tool.
llvm-svn: 264667
A DICompileUnit that is not listed in llvm.dbg.cu will cause assertion
failures and/or crashes in the backend. The Verifier should reject this.
rdar://problem/25369499
llvm-svn: 264657
Spiritually reapply commit r264409 (reverted in r264410), albeit with a
bit of a redesign.
Firstly, avoid splitting the big blob into multiple chunks of strings.
r264409 imposed an arbitrary limit to avoid a massive allocation on the
shared 'Record' SmallVector. The bug with that commit only reproduced
when there were more than "chunk-size" strings. A test for this would
have been useless long-term, since we're liable to adjust the chunk-size
in the future.
Thus, eliminate the motivation for chunk-ing by storing the string sizes
in the blob. Here's the layout:
vbr6: # of strings
vbr6: offset-to-blob
blob:
[vbr6]: string lengths
[char]: concatenated strings
Secondly, make the output of llvm-bcanalyzer readable.
I noticed when debugging r264409 that llvm-bcanalyzer was outputting a
massive blob all in one line. Past a small number, the strings were
impossible to split in my head, and the lines were way too long. This
version adds support in llvm-bcanalyzer for pretty-printing.
<STRINGS abbrevid=4 op0=3 op1=9/> num-strings = 3 {
'abc'
'def'
'ghi'
}
From the original commit:
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
llvm-svn: 264551
If you're building dwps from other dwps, it can be hard to track down a
duplicate CU ID if it comes from two compilations of the same file in
different modes, etc. By including the .dwo path (which is hopefully
more unique than the file path) it can help track down where the
duplicates came from.
llvm-svn: 264520
Optimize output of MDStrings in bitcode. This emits them in big blocks
(currently 1024) in a pair of records:
- BULK_STRING_SIZES: the sizes of the strings in the block, and
- BULK_STRING_DATA: a single blob, which is the concatenation of all
the strings.
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
I needed to add support for blobs to streaming input to get the test
suite passing.
- StreamingMemoryObject::getPointer reads ahead and returns the
address of the blob.
- To avoid a possible reallocation of StreamingMemoryObject::Bytes,
BitstreamCursor::readRecord needs to move the call to JumpToEnd
forward so that getPointer is the last bitstream operation.
llvm-svn: 264409
The motivation for MODULE_CODE_METADATA_VALUES was to enable an
-flto=thin scheme where:
1. First, one function is cherry-picked from a bitcode file.
2. Later, another function is cherry-picked.
3. Later, ...
4. Finally, the metadata needed by all the previous functions is
loaded.
This was abandoned in favour of:
1. Calculate the superset of functions needed from a Module.
2. Link all functions at once.
Delayed metadata reading no longer serves a purpose. It also adds
a few complication, since we can't count on metadata being properly
parsed when exiting the BitcodeReader. After discussing with Teresa, we
agreed to remove it.
The code that depended on this was removed/updated in r264326.
llvm-svn: 264378
Going to be reading the DW_AT_GNU_dwo_name shortly as well, and there
was already enough duplication here that it was worth refactoring
rather than adding even more.
llvm-svn: 264350
Summary:
Using leading zeroes allows you to search for "000%" to find non-covered
items.
Differential Revision: http://reviews.llvm.org/D18420
llvm-svn: 264336
Summary:
Use bulk importing so we can avoid the use of post-pass metadata
linking. Cloned the ModuleLazyLoaderCache from the FunctionImport pass
to facilitate this.
Reviewers: joker.eph
Subscribers: dexonsmith, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18455
llvm-svn: 264326
The patch supports common STV_xxx visibility flags and MIPS specific
STO_MIPS_xxx flags.
Differential Revision: http://reviews.llvm.org/D18447
llvm-svn: 264300
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
MCContext shouldn't be accessing the filesystem - that's a gross
layering violation and makes it awkward to use as a library or in a
daemon where it may not even be allowed filesystem access.
The CWD lookup here is normally redundant anyway, since the calling
context either also looks up the CWD or sets this to something more
specific. Here, we fix up the one caller that doesn't already set up a
debug compilation dir and make it clear that the responsibility for
such set up is in the users of MCContext.
llvm-svn: 264109
In executable and shared object ELF files, relocations in the file contain the final virtual address rather than section offset so this is adjusted to display section offset.
Differential revision: http://reviews.llvm.org/D15965
llvm-svn: 263971
Summary: Also expose getters and setters in the C API, so that the change can be tested.
Reviewers: nhaehnle, axw, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18260
From: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
llvm-svn: 263886
Summary:
ThinLTO is relying on linkInModule to import selected function.
However a lot of "magic" was hidden in linkInModule and the IRMover,
who would rename and promote global variables on the fly.
This is moving to an approach where the steps are decoupled and the
client is reponsible to specify the list of globals to import.
As a consequence some test are changed because they were relying on
the previous behavior which was importing the definition of *every*
single global without control on the client side.
Now the burden is on the client to decide if a global has to be imported
or not.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18122
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263863
On Rafael's suggestion!
(also fix a discrepancy between this error message format and the others)
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263860
Now that the resolved path cache stores the StringRef's, its
best to just always cache the results, even when realpath isn't
used. This way we'll still avoid the StringMap hashing and lookup.
This also conveniently reorganises this code in a way I need for
a future patch.
llvm-svn: 263777
ResolvedPaths was storing std::string's as a cache. We would then take those strings and look them up in the internString pool to get a unique StringRef for each path.
This patch changes ResolvedPaths to store the StringRef pointing in to the internString pool itself. This way, when getResolvedPath returns a string, we know we have the StringRef we would find in the pool anyway. We can avoid the duplicate memory of the std::string's, and also the time from the lookup.
Unfortunately my profiles show no runtime change here, but it should still save memory allocations which is nice.
Reviewed by Frederic Riss.
Differential Revision: http://reviews.llvm.org/D18259
llvm-svn: 263774
It might be hard to recognize a hexadecimal number without '0x' prefix.
Besides that '0x' prefix corresponds to GNU objdump behaviour.
Differential Revision: http://reviews.llvm.org/D18207
llvm-svn: 263705
The section alignment field was marked optional but not provided a
default value: initialize it with 0.
While we are here, ensure that the section alignment is plausible.
llvm-svn: 263692
Annoyingly, ErrorOr allows to *not check* the error when things go
well. It will crash badly when there is an error though. It should
runtime assert when it is used without being checked!
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263577
The PE TLS directory contains information about where the TLS data
resides in the image, what functions should be executed when threads are
created, etc.
llvm-svn: 263537
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
(Resubmitting after fixing missing file issue)
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263513
If anybody is actually using this, it probably doesn't do what they
think it does. This actually causes the dylib to *export* a
__cxa_atexit symbol, so anything that links it probably loses their
exit time destructors as well as disabling LLVM's.
This just removes the option entirely. If somebody does need this
behaviour we should figure out a more principled way to do it.
This is effectively a revert of r223805.
llvm-svn: 263498
Summary:
llvm-config --libs does not produce correct output since commit r260263
(llvm-config: Add preliminary Windows support) changed naming format of
the libraries. This patch updates llvm-config to recognize new naming
format and output correct linker flags.
Ref: https://llvm.org/bugs/show_bug.cgi?id=26581
Patch by Vedran Miletić
Reviewers: ehsan, rnk, pxli168
Subscribers: pxli168
Differential Revision: http://reviews.llvm.org/D17300
llvm-svn: 263497
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263490
Summary:
Caller can provides the list of .so files where some files are
unreadable (e.g linux-vdso.so.1). It's more convenient to handler this in
sancov with warning then making all callers to check files.
Reviewers: aizatsky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18103
llvm-svn: 263307
Summary:
This patch adds support for including a full reference graph including
call graph edges and other GV references in the summary.
The reference graph edges can be used to make importing decisions
without materializing any source modules, can be used in the plugin
to make file staging decisions for distributed build systems, and is
expected to have other uses.
The call graph edges are recorded in each function summary in the
bitcode via a list of <CalleeValueIds, StaticCount> tuples when no PGO
data exists, or <CalleeValueId, StaticCount, ProfileCount> pairs when
there is PGO, where the ValueId can be mapped to the function GUID via
the ValueSymbolTable. In the function index in memory, the call graph
edges reference the target via the CalleeGUID instead of the
CalleeValueId.
The reference graph edges are recorded in each summary record with a
list of referenced value IDs, which can be mapped to value GUID via the
ValueSymbolTable.
Addtionally, a new summary record type is added to record references
from global variable initializers. A number of bitcode records and data
structures have been renamed to reflect the newly expanded scope of the
summary beyond functions. More cleanup will follow.
Reviewers: joker.eph, davidxl
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17212
llvm-svn: 263275
This was originally a pointer to support pass managers which didn't use
AnalysisManagers. However, that doesn't realistically come up much and
the complexity of supporting it doesn't really make sense.
In fact, *many* parts of the pass manager were just assuming the pointer
was never null already. This at least makes it much more explicit and
clear.
llvm-svn: 263219
LLVM Gold plugin decides which instance of a common symbol it wants
based on the symbol size in claim_file_hook. If the file that
contains the chosen instance is later dropped from the link, we end
up with an undefined reference.
This change delays this decision until the set of the included files
is known.
llvm-svn: 263180
location in the opt tool to live along side the analysis in LLVM's
libraries.
No functionality changed here, but this will allow me to port the
printer to the new pass manager as well.
llvm-svn: 263101
opt adds Verifier passes in AddOptimizationPasses even if
-disable-verify is on. Fix it so that the extra verification occurs
either when (1) -disable-verifier is off, or (2) -verify-each is on.
Thanks to David Jones for pointing out this behavior!
llvm-svn: 263090
Summary:
This is intended to be a performance flag, on the same level as clang
cc1 option "--disable-free". LLVM will never initialize it by default,
it will be up to the client creating the LLVMContext to request this
behavior. Clang will do it by default in Release build (just like
--disable-free).
"opt" and "llc" can opt-in using -disable-named-value command line
option.
When performing LTO on llvm-tblgen, the initial merging of IR peaks
at 92MB without this patch, and 86MB after this patch,setNameImpl()
drops from 6.5MB to 0.5MB.
The total link time goes from ~29.5s to ~27.8s.
Compared to a compile-time flag (like the IRBuilder one), it performs
very close. I profiled on SROA and obtain these results:
420ms with IRBuilder that preserve name
372ms with IRBuilder that strip name
375ms with IRBuilder that preserve name, and a runtime flag to strip
Reviewers: chandlerc, dexonsmith, bogner
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17946
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263086
It is a transitive dependency, so static build are OK but not build
with individual DSO for each LLVM library.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 262987
This is intended to provide a parallel (threaded) ThinLTO scheme
for linker plugin use through the libLTO C API.
The intent of this patch is to provide a first implementation as a
proof-of-concept and allows linker to start supporting ThinLTO by
definiing the libLTO C API. Some part of the libLTO API are left
unimplemented yet. Following patches will add support for these.
The current implementation can link all clang/llvm binaries.
Differential Revision: http://reviews.llvm.org/D17066
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 262977
Summary: I left --build-system for backwards compat, in case there are scripts using it. Feel free to ask for its removal too.
Reviewers: chapuni, tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17886
llvm-svn: 262924
The split code gen task ID should not be appended to save-temps output
file when the parallelism factor is 1 (not actually splitting).
llvm-svn: 262731
Summary:
Since IR files are all compiled into separate independent object files
in ThinLTO mode, the prevailing linkonce symbols must be emitted in its
object file even if it is no longer referenced there, e.g. if no
references remain in the module after inlining, since it may be
referenced by another ThinLTO compiled object file. This is done by
changing LDPR_PREVAILING_DEF_IRONLY* symbols to LDPR_PREVAILING_DEF,
which converts the prevailing linkonce to weak. We also don't need the
other prevailing IRONLY handling for internalization, which is not
currently performed for ThinLTO.
Test case included.
Reviewers: davidxl, rafael
Subscribers: rafael, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16173
llvm-svn: 262727
Summary:
Launch ThinLTO backends (LTO and codegen pipelines with importing) in
parallel using a ThreadPool, after creating the combined index.
The number of threads is controlled by the existing -jobs gold plugin
option, or the hardware concurrency if not specified.
The old behavior of exiting after creating the combined index can be
invoked via a new thinlto-index-only plugin option.
This commit involves just the ThinLTO-specific pieces of D15390, the NFC
and other restructuring pieces were committed independently:
r262677: Add hardware_concurrency interface to llvm::thread (NFC)
r262719: Change split code gen to use ThreadPool
r262721: Refactor gold-plugin codegen to prepare for ThinLTO threads (NFC)
Reviewers: pcc, joker.eph, rafael
Subscribers: rafael, davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D15390
llvm-svn: 262724
This is the NFC part remaining from D15390, which refactors the
current codegen() into a CodeGen class with various modular methods and
other helper functions that will be used by the follow-on ThinLTO piece.
llvm-svn: 262721
Gold has a newly added LDPT_GET_SYMBOLS_V3 callback that can
distinguish between a module that is not included in the link, and
one that is included but has its entire interface preempted by others.
Fixes PR26674.
llvm-svn: 262676
Function lto_module_create_in_local_context() would previously
rely on the default LLVMContext being created for it by
LTOModule::makeLTOModule(). This context exits the program on
error and is not arranged to update sLastStringError in
tools/lto/lto.cpp.
Function lto_module_create_in_local_context() now creates an
LLVMContext by itself, sets it up correctly to its needs and then
passes it to LTOModule::createInLocalContext() which takes
ownership of the context and keeps it present for the lifetime of
the returned LTOModule.
Function LTOModule::makeLTOModule() is modified to take a
reference to LLVMContext (instead of a pointer) and no longer
creates a default context when nullptr is passed to it. Method
LTOModule::createInContext() that takes a pointer to LLVMContext
is removed because it allows to pass a nullptr to it. Instead
LTOModule::createFromBuffer() (that takes a reference to
LLVMContext) should be used.
Differential Revision: http://reviews.llvm.org/D17715
llvm-svn: 262330
This is needed to connect dependencies between the LLVMgold plugin and the clang stage-2 builds due to limitations in ExternalProject_Add.
Patch by Mike Edwards
Differential Revision: http://reviews.llvm.org/D17655
llvm-svn: 262067
These diagnostics aren't perfect - in the case of merging several dwos
into dwps and those dwps into more dwps - just getting the message about
the original source file name might not be much help (since it's the
same in both dwos, by definition - but doesn't tell you which chain of
dwps to backtrack)
It might be worth adding the DW_AT_dwo_id to the split debug info to
improve the diagnostic experience - might help track down the duplicates
better.
llvm-svn: 261988
Though a bit odd, this is handy for a few reasons - for example, in a
build system that wants consistent input/output of build steps, but
where split-dwarf might be overriden/disabled by the user on a per-file
basis.
llvm-svn: 261987
This creates the new-style LoopPassManager and wires it up with dummy
and print passes.
This version doesn't support modifying the loop nest at all. It will
be far easier to discuss and evaluate the approaches to that with this
in place so that the boilerplate is out of the way.
llvm-svn: 261831
Figured this would be a problem, but didn't want to jump the gun - large
inputs demonstrate it pretty easily (mostly for type units, but might as
well do the same for CUs too). A random sample 6m27s -> 27s change.
Also, by checking this up-front for CUs (rather than when building the
cu_index) we can probably provide better error messages (see FIXMEs),
hopefully providing the name of the CUs rather than just their
signature.
llvm-svn: 261364
Summary:
This change adds 3 tables to html report:
- list of covered files with number of functions covered.
- list of not covered files
- list of not covered functions.
I tried to put most coverage-calculating functionality into
SourceCoverageData.
Differential Revision: http://reviews.llvm.org/D17421
llvm-svn: 261287
Summary: As per title. There was a lot of part missing in the C API, so I had to extend the invoke and landingpad API.
Reviewers: echristo, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17359
llvm-svn: 261254
This avoids a operator precedence warning for mixing + and | in an
expression. I checked that this matches the definition in the Split
DWARF proposal.
Patch by Cong Liu!
Differential Revision: http://reviews.llvm.org/D17375
llvm-svn: 261207
analysis passes, support pre-registering analyses, and use that to
implement parsing and pre-registering a custom alias analysis pipeline.
With this its possible to configure the particular alias analysis
pipeline used by the AAManager from the commandline of opt. I've updated
the test to show this effectively in use to build a pipeline including
basic-aa as part of it.
My big question for reviewers are around the APIs that are used to
expose this functionality. Are folks happy with pass-by-lambda to do
pass registration? Are folks happy with pre-registering analyses as
a way to inject customized instances of an analysis while still using
the registry for the general case?
Other thoughts of course welcome. The next round of patches will be to
add the rest of the alias analyses into the new pass manager and wire
them up here so that they can be used from opt. This will require
extending the (somewhate limited) functionality of AAManager w.r.t.
module passes.
Differential Revision: http://reviews.llvm.org/D17259
llvm-svn: 261197
Modify ProfileSummary class to make it not instrumented profile specific.
Add a new InstrumentedProfileSummary class that inherits from ProfileSummary.
Differential Revision: http://reviews.llvm.org/D17310
llvm-svn: 261119
The dynamic table is also an array of a fixed structure, so it can be
represented with a DynReginoInfo.
No major functionality change. The extra error checking is covered by
existing tests with a broken dynamic program header.
Idea extracted from r260488. I did the extra cleanups.
llvm-svn: 261107
We used to keep both a section and a pointer to the first symbol.
The oddity of keeping a section for dynamic symbols is because there is
a DT_SYMTAB but no DT_SYMTABZ, so to print the table we have to find the
size via a section table.
The reason for still keeping a pointer to the first symbol is because we
want to be able to print relocation tables even if the section table is
missing (it is mandatory only for files used in linking).
With this patch we keep just a DynRegionInfo. This then requires
changing a few places that were asking for a Elf_Shdr but actually just
needed the first symbol.
The test change is to delete the program header pointer.
Now that we use the information of both DT_SYMTAB and .dynsym, we don't
depend on the sh_entsize of .dynsym if we see DT_SYMTAB.
Note: It is questionable if it is worth it putting the effort to report
broken sh_entsize given that in files with no section table we have to
assume it is sizeof(Elf_Sym), but that is for another change.
Extracted from r260488.
llvm-svn: 261099
Original commit message:
[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations.
The bits of r260488 it depends on have been committed.
llvm-svn: 260970
This requires making an error message a bit more generic, but that seems
a reasonable tradeoff.
Extracted from r260488 but simplified a bit.
llvm-svn: 260967
Original messages:
Revert "[readobj] Handle ELF files with no section table or with no program headers."
Revert "[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations."
r260489 depends on r260488 and among other issues r260488 deleted error
handling code.
llvm-svn: 260962
When cmake is run with -DLLVM_ENABLE_PIC=OFF, build fails while
linking shared library libLTO.so, because its dependencies are built
with -fno-PIC. More details here: https://llvm.org/bugs/show_bug.cgi?id=26484.
This diff reverts r252652 (git 9fd4377ddb83aee3c049dc8757e7771edbb8ee71),
which removed check NOT LLVM_ENABLE_PIC before disabling build for libLTO.so.
Patch by Igor Sugak!
Differential Revision: http://reviews.llvm.org/D17049
llvm-svn: 260703
Multi-dso programs result in multiple coverage files dumped of the form
'<module_name>.<pid>.sancov'. When analyzing these coverage files it is
important to use correct corresponding object file.
This change removes the "-obj" sancov flag and lets user specify object
file names alongside coverage files. Sancov tool would match them using
<module_name> part of coverage file and short file name of the object
file.
Corresponding changes:
- compiler-rt: http://reviews.llvm.org/D17171
- docs: http://reviews.llvm.org/D17175
Differential Revision: http://reviews.llvm.org/D17169
llvm-svn: 260628
Summary: This required to add binding to Instruction::removeFromParent so that instruction can be forward declared and then moved at the right place.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17057
llvm-svn: 260597
The rational for this change is that LLVMBuild cannot express conditional
dependencies. Therefore, when we start optionally using GlobalISel library for
say AArch64, without that change, all the tools that use the AArch64 library
would need to explicitly link with GlobalISel when we ask for it.
This does not scale.
Instead, we will set the dependencies between the target and GlobalISel and if
we did not ask to build GlobalISel, the library will just be empty.
Thanks to Chris Bieneman and Mehdi Animi for the idea.
llvm-svn: 260566
This adds support for finding the dynamic table and dynamic symbol table via
the section table or the program header table. If there's no section table an
attempt is made to figure out the length of the dynamic symbol table.
llvm-svn: 260488
This restores commit r260408, along with a fix for a bot failure.
The bot failure was caused by dereferencing a unique_ptr in the same
call instruction parameter list where it was passed via std::move.
Apparently due to luck this was not exposed when I built the compiler
with clang, only with gcc.
llvm-svn: 260442
New option --elf-output-style=LLVM or GNU
Enables -file-headers in readelf style when elf-output-style=GNU
Differential revision: http://reviews.llvm.org/D14128
llvm-svn: 260430
Summary:
This patch uses the lower 64-bits of the MD5 hash of a function name as
a GUID in the function index, instead of storing function names. Any
local functions are first given a global name by prepending the original
source file name. This is the same naming scheme and GUID used by PGO in
the indexed profile format.
This change has a couple of benefits. The primary benefit is size
reduction in the combined index file, for example 483.xalancbmk's
combined index file was reduced by around 70%. It should also result in
memory savings for the index file in memory, as the in-memory map is
also indexed by the hash instead of the string.
Second, this enables integration with indirect call promotion, since the
indirect call profile targets are recorded using the same global naming
convention and hash. This will enable the function importer to easily
locate function summaries for indirect call profile targets to enable
their import and subsequent promotion.
The original source file name is recorded in the bitcode in a new
module-level record for use in the ThinLTO backend pipeline.
Reviewers: davidxl, joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D17028
llvm-svn: 260408
New option --elf-output-style=LLVM or GNU
Enables -file-headers in readelf style when elf-output-style=GNU
Differential revision: http://reviews.llvm.org/D14128
llvm-svn: 260391
This patch uses one bit in profile version to differentiate Clang
instrumentation and IR level instrumentation profiles.
PGOInstrumenation generates a COMDAT variable __llvm_profile_raw_version so
that the compiler runtime can set the right profile kind.
For Maco-O platform, we generate the variable as linkonce_odr linkage as
COMDAT is not supported.
PGOInstrumenation now checks this bit to make sure it's an IR level
instrumentation profile.
The patch was submitted as r260164 but reverted due to a Darwin test breakage.
Original Differential Revision: http://reviews.llvm.org/D15540
Differential Revision: http://reviews.llvm.org/D17020
llvm-svn: 260385
This patch adds a new class, OrcI386, which contains the hooks needed to
support lazy-JITing on i386 (currently only for Pentium 2 or above, as the JIT
re-entry code uses the FXSAVE/FXRSTOR instructions).
Support for i386 is enabled in the LLI lazy JIT and the Orc C API, and
regression and unit tests are enabled for this architecture.
llvm-svn: 260338
Summary: As per title. This also include extra support for insertvalue and extracvalue.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17055
llvm-svn: 260335
Summary: As per title. This remove the need to rely on internal knowledge of call and invoke instruction to find called value and argument count.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Differential Revision: http://reviews.llvm.org/D17054
llvm-svn: 260332
Summary: This is a bit of refactoring required to be able to generate instruction in forward basic block. This, for instance, is a requirement for phi in loops.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Differential Revision: http://reviews.llvm.org/D17050
llvm-svn: 260324
Summary: As per title. Also add a facility method to get the name of a basic block from the C API.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16912
llvm-svn: 260309
This reverts commit r259578.
There are enough issues with this small patch that it is better to
revert and then commit a fixed version (will be committed shortly).
llvm-svn: 260285
Summary:
This patch adds Windows support for a few of the llvm-config commands,
including cflags, ldflags, libs, and system-libs.
Currently llvm-config is untested, so this patch adds tests for the
commands that it fixes as well.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16762
llvm-svn: 260263
It is possible to have .got section and one or more zero-sized section
at the same address. This patch first checks that GOT (or GOT PLT)
section should have non-zero size using corresponding dynamic tags. Then
it looks up not empty section at the specified address.
Differential Revision: http://reviews.llvm.org/D16968
llvm-svn: 260245
It was using format() with a string for 64-bit types but was
passed a 32-bit type in places when printing values for
32-bit Mach-O files.
rdar://24542509
llvm-svn: 260243
This patch uses one bit in profile version to differentiate Clang
instrumentation and IR level instrumentation profiles.
PGOInstrumenation generates a COMDAT variable __llvm_profile_raw_version so
that the compiler runtime can set the right profile kind.
PGOInstrumenation now checks this bit to make sure it's an IR level
instrumentation profile.
Differential Revision: http://reviews.llvm.org/D15540
llvm-svn: 260146
a significant fraction of the file size (for files that otherwise have few
records). Also include an average size per record in the summary information.
llvm-svn: 259965
This makes it less likely to clash with other stuff that might be linked
in by change, e.g. ncurses exposes an external function called simply
"echo", so linking ncurses statically into the binary explodes in funny
ways.
llvm-svn: 259882
Summary: This diff increase the tested surface of the C API.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16910
llvm-svn: 259863
Summary: As per title. It is required and don't get linked in in some builds.
Reviewers: chapuni, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16903
llvm-svn: 259853
Summary computation is not just for instrumented profiling and so I have moved
the ProfileSummary class to ProfileCommon.h (named so to allow code unrelated
to summary but common to instrumented and sampled profiling to be placed there)
Differential Revision: http://reviews.llvm.org/D16661
llvm-svn: 259846
Summary:
This basically add an echo test case in C. The support is limited right now, but full support would just be too much to review at once.
The echo test case simply get a module as input and try to output the same exact module. This allow to check the both reading and writing API are working as expected.
I want to improve this test over time to support more and more of the API, in order to improve coverage (coverage is quite poor right now).
Test Plan: Run the test.
Reviewers: chandlerc, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10725
llvm-svn: 259844
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
llvm-svn: 259535
Noticed while working on scattered relocations.
I do not think these relocs can actually happen in the debug_info section,
but if they happen the code would mishandle them. Explicitely skip them
and warn if we encounter one.
llvm-svn: 259341
Although it seems like clang will never emit scattered relocations in
the debug information (at least I couldn't find a way), we have too
support them for the benefit of other compilers.
As clang doesn't generate them, the included testcase was produced
from hacked up assembly.
llvm-svn: 259339
llvm-dsymutil was misinterpreting the value of common symbols as their
address when it actually contains their size. This didn't impact
llvm-dsymutil's ability to link the debug information for common symbols
because these are always found by name and not by address. Things could
however go wrong when the size of a common object matched the object
file address of another symbol. Depending on the link order of the symbols
the common object might incorrectly evict this other object from the
address to symbol mapping, and then link the evicted symbol with a wrong
binary address.
Use the new ability to have symbols without an object file address to fix
this.
llvm-svn: 259318
This change just changes the data structure that ties symbol names,
object file address and linked binary addresses to accept mappings
with no object file address. Such symbol mappings are not fed into
the debug map yet, so this patch is NFC.
A subsequent patch will make use of this functionality for common
symbols.
llvm-svn: 259317
Add an option to llvm-profdata merge for writing out sparse indexed
profiles. These profiles omit InstrProfRecords for functions which are
never executed.
Differential Revision: http://reviews.llvm.org/D16727
llvm-svn: 259258
This patch enables llvm-bcanalyzer to print the bitcode wrapper header
if the file has one, which is needed to test the changes made in
r258627 (bitcode-wrapper-header-armv7m.ll is the test case for r258627).
Differential Revision: http://reviews.llvm.org/D16642
llvm-svn: 259162
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
We already perform it at the beginning of the function so we can't
arrive here with an invalid object. Also, add a test so that bugs
won't sneak in the future.
llvm-svn: 258982
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Adds a way to inspect SHT_GROUP sections in ELF objects.
Displays signature, member sections of these sections.
Differential revision: http://reviews.llvm.org/D16555
llvm-svn: 258845
llvm-objdump when printing the Mach Header to print the unknown
cputype and cpusubtype fields as decimal instead of not printing
them at all. And change the test to check for that.
llvm-svn: 258826
This patch was originally committed as r257885, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258683
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "bad string index" for bad string indexes. Updated the error message
in the llvm-objdump test, and added tests to show llvm-nm prints
"bad string index" and a test to print the actual bad string index value
which in this case is 0xfe000002 when printing the fields as raw hex.
llvm-svn: 258520
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "(?,?)" or just "s" for bad section indexes. Also added a test to show
it prints the bad section index of "42" when printing the fields as raw hex.
llvm-svn: 258434
Summary:
Add components back into calls to llvm-config,
which was accidentally removed in r258283.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16392
llvm-svn: 258383
This patch adds the necessary plumbing to cmake to build the sources related to
GlobalISel.
To build the sources related to GlobalISel, we need to add -DBUILD_GLOBAL_ISEL=ON.
By default, this is OFF, thus GlobalISel sources will not impact people that do
not explicitly opt-in.
Differential Revision: http://reviews.llvm.org/D15983
llvm-svn: 258344
Some architecture specific ELF section flags might have the same value
(for example SHF_X86_64_LARGE and SHF_HEX_GPREL) and we have to check
machine architectures to select an appropriate set of possible flags.
The patch selects architecture specific flags into separate arrays
`ElfxxxSectionFlags` and combines `ElfSectionFlags` and `ElfxxxSectionFlags`
before pass to the `StreamWriter::printFlags()` method.
Differential Revision: http://reviews.llvm.org/D16269
llvm-svn: 258334
This addresses PR26060 where function lto_module_create() could return nullptr
but lto_get_error_message() returned an empty string.
The error() call after LTOModule::createFromFile() in llvm-lto is then removed
because any error from this function should go through the diagnostic handler in
llvm-lto which will exit the program. The error() call was added because this
previously did not happen when the file was non-existent. This is fixed by the
patch. (The situation that llvm-lto reports an error when the input file does
not exist is tested by llvm/tools/llvm-lto/error.ll).
Differential Revision: http://reviews.llvm.org/D16106
llvm-svn: 258298
Summary:
This is a re-commit of r257003, which was reverted,
along with the fixes from http://reviews.llvm.org/D15986.
r252532 added support for reporting the monolithic library
when LLVM_BUILD_LLVM_DYLIB is used. This would only be done
if the individual components were not found, and the dynamic
library is found.
This diff extends this as follows:
- If LLVM_LINK_LLVM_DYLIB is set, then prefer the shared
library, even if all component libraries exist.
- Two flags, --link-shared and --link-static are introduced
to provide explicit guidance. If --link-shared is passed
and the shared library does not exist, an error results.
Additionally, changed the expected shared library names from
(e.g.) LLVM-3.8.0 to LLVM-3.8. The former exists only in an
installation (and then only in CMake builds I think?), and not
in the build tree; this breaks usage of llvm-config during
builds, e.g. by llvm-go.
Reviewers: DiamondLovesYou, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15986
llvm-svn: 258283
Summary:
Currently llvm::SplitModule as the first step globalizes all local objects, which might not be desirable in some scenarios.
This change adds a new flag to llvm::SplitModule that uses SCC approach to search for a balanced partition without the need to externalize symbols.
Such partition might not be possible or fully balanced for a given number of partitions, and is a function of the module properties (global/local dependencies within the module).
Joint development Tobias Edler von Koch (tobias@codeaurora.org) and Sergei Larin (slarin@codeaurora.org)
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D16124
llvm-svn: 258083
MIPS 32-bit ABI uses REL relocation record format to save dynamic
relocations. The patch teaches llvm-readobj to show dynamic relocations
in this format.
Differential Revision: http://reviews.llvm.org/D16114
llvm-svn: 258001
Entry block count was not counted and is corrected. Also
introduce a new metric that is MaxInternalBlockCount which
show command shows (as before).
llvm-svn: 257987
This is part of a new statistics gathering feature for the sanitizers.
See clang/docs/SanitizerStats.rst for further info and docs.
Differential Revision: http://reviews.llvm.org/D16174
llvm-svn: 257970
This reverts commit r257751, bringing back r256105.
The problem the assert found was fixed in r257915.
Original commit message:
Assert that we have all use/users in the getters.
An error that is pretty easy to make is to use the lazy bitcode reader
and then do something like
if (V.use_empty())
The problem is that uses in unmaterialized functions are not accounted
for.
This patch adds asserts that all uses are known.
llvm-svn: 257920
# The first commit's message is:
Revert "[ARM] Add DSP build attribute and extension targeting"
This reverts commit b11cc50c0b4a7c8cdb628abc50b7dc226ff583dc.
# This is the 2nd commit message:
Revert "[ARM] Add new system registers to ARMv8-M Baseline/Mainline"
This reverts commit 837d08454e3e5beb8581951ac26b22fa07df3cd5.
llvm-svn: 257916
Added forgotten ELFDumper.cpp to commit.
Initial commit message:
[llvm-readobj] Add support for TLSDESC_PLT and TLSDESC_GOT dynamic section tags to the llvm-readobj.
If module uses uses lazy TLSDESC relocations it should define DT_TLSDESC_PLT and DT_TLSDESC_GOT entries.
They were unknown for llvm-readobj before this patch.
Differential revision: http://reviews.llvm.org/D16224
llvm-svn: 257914
classes.
OrcRemoteTargetClient::RCMemoryManager will now register EH frames with the
server automatically. This allows remote-execution of code that uses exceptions.
llvm-svn: 257816
These fields are almost always zero. However, there are relocations
against them, and we should print the relocation symbol with it as
SYM+0xNN.
llvm-svn: 257776
Binary annotations are encoded along the lines of UTF-8 and ECI but with
a few minor differences.
The algorithm specified in "ECMA-335 CLI Section II.3.2 - Blobs and
Signatures" is used to compress binary annotations. Signed binary
annotations are encoded like unsigned annotations except the sign bit is
rotated left to reduce the number of bits needed to be encoded.
llvm-svn: 257742
Moves some .def files into include/DebugInfo/CodeView.
Aslo remove a 'using namespace' directive from a header in readobj and
update the uses of the endian helper types to compensate.
llvm-svn: 257712
This adds a detailed profile summary in llvm-profdata. The summary is in the
form of one or more triples of the form (P, N, M) which is interpreted as if
we look at the Top-N counts in the profile, their sum accounts for P percentage
of the sum of all counts in the program and the minimum count in the Top-N is M.
Differential Revision: http://reviews.llvm.org/D16005
llvm-svn: 257680
This rewrites and expands the existing codeview dumping functionality in
llvm-readobj using techniques similar to those in lib/Object. This defines a
number of new records and enums useful for reading memory mapped codeview
sections in COFF objects.
The dumper is intended as a testing tool for LLVM as it grows more codeview
output capabilities.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D16104
llvm-svn: 257658
When we arrive at the end of the function, the validation of
the object has been done already. In theory, so, we should never
arrive here with something broken as the object isn't mutated.
Practice sometimes proves theory to be wrong, so leave an assertion
instead, as suggested by David Blaikie, to catch bugs.
llvm-svn: 257570
This change has us print out fields we didn't previously understand. To
improve readability, we now group column information with it's
respective line.
llvm-svn: 257552
to only print the first private header.
Which for Mach-O files only prints the Mach header and not the subsequent load
commands. Which is used by scripts to match what the darwin otool(1) with the
-h flag does without the -l flag.
For non-Mach-O files it has the same functionality as -private-headers (with
the trailing ’s’).
rdar://24158331
llvm-svn: 257548
A request has been made to the official registry, but an official value is
not yet available. This patch uses a temporary value in order to support
development. When an official value is recieved, the value of EM_WEBASSEMBLY
will be updated.
llvm-svn: 257517
The new ORC remote-JITing support provides a superset of the old code's
functionality, so we can replace the old stuff. As a bonus, a couple of
previously XFAILed tests have started passing.
llvm-svn: 257343
Summary:
r252532 added support for reporting the monolithic library
when LLVM_BUILD_LLVM_DYLIB is used. This would only be done
if the individual components were not found, and the dynamic
library is found.
This diff extends this as follows:
- If LLVM_LINK_LLVM_DYLIB is set, then prefer the shared
library, even if all component libraries exist.
- Two flags, --link-shared and --link-static are introduced
to provide explicit guidance. If --link-shared is passed
and the shared library does not exist, an error results.
Additionally, changed the expected shared library names from
(e.g.) LLVM-3.8.0 to LLVM-3.8. The former exists only in an
installation (and then only in CMake builds I think?), and not
in the build tree; this breaks usage of llvm-config during
builds, e.g. by llvm-go.
Reviewers: DiamondLovesYou, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15033
llvm-svn: 257003
This replicates the logic of Darwin dwarfdump for manually opening up
.dSYM bundles without introducing any new dependencies.
<rdar://problem/20491670>
llvm-svn: 256350
It turns out that his is *really* slow. With this change the link of
clang with plugin-opt=emit-llvm goes from 41 to 26 seconds.
We can add an option to enable it again if needed.
llvm-svn: 256302
Today, we always take into account the possibility that object files
produced by MC may be consumed by an incremental linker. This results
in us initialing fields which vary with time (TimeDateStamp) which harms
hermetic builds (e.g. verifying a self-host went well) and produces
sub-optimal code because we cannot assume anything about the relative
position of functions within a section (call sites can get redirected
through incremental linker thunks).
Let's provide an MCTargetOption which controls this behavior so that we
can disable this functionality if we know a-priori that the build will
not rely on /incremental.
llvm-svn: 256203
Michael Kuperstein