Summary:
To be able to work accurately on the reference graph when taking decision
about internalizing, promoting, renaming, etc. We need to have the alias
information explicit.
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18836
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266214
Summary:
Let keep llvm-as "dumb": it converts textual IR to bitcode. This
commit removes the dependency from llvm-as to libLLVMAnalysis.
We'll add back summary in llvm-as if we get to a textual
representation for it at some point. In the meantime, opt seems
like a better place for that.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19032
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266131
We were incorrectly reporting all non-64 bit integers as int64s.
This is most evident when trying to print the "short" type, but
in theory could happen with chars too (although usually chars use
a different builtin type).
Additionally, we were using the wrong check when deciding whether
to print an enum definition as a global enum. We were checking
whether or not the enum was "nested", and if so saving it until
we print the class definition that it was nested in. But this is
not correct in rare situations where the enum is nested, but the
class that it's nested in does not have type information in the PDB.
So instead we check if there is a class definition for the parent
in the PDB. If so we save it for later, otherwise we print it.
llvm-svn: 265993
Summary:
This is the first step in also serializing the index out to LLVM
assembly.
The per-module summary written to bitcode is moved out of the bitcode
writer and to a new analysis pass (ModuleSummaryIndexWrapperPass).
The pass itself uses a new builder class to compute index, and the
builder class is used directly in places where we don't have a pass
manager (e.g. llvm-as).
Because we are computing summaries outside of the bitcode writer, we no
longer can use value ids created by the bitcode writer's
ValueEnumerator. This required changing the reference graph edge type
to use a new ValueInfo class holding a union between a GUID (combined
index) and Value* (permodule index). The Value* are converted to the
appropriate value ID during bitcode writing.
Also, this enables removal of the BitWriter library's dependence on the
Analysis library that was previously required for the summary computation.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18763
llvm-svn: 265941
Sample-based profiling and optimization remarks currently remove
DICompileUnits from llvm.dbg.cu to suppress the emission of debug info
from them. This is somewhat of a hack and only borderline legal IR.
This patch uses the recently introduced NoDebug emission kind in
DICompileUnit to achieve the same result without breaking the Verifier.
A nice side-effect of this change is that it is now possible to combine
NoDebug and regular compile units under LTO.
http://reviews.llvm.org/D18808
<rdar://problem/25427165>
llvm-svn: 265861
Reenable reverted r265550 with endianness issue fixed. Variables of
endian-aware types such as ulittle32_t should be explicitly casted
to their natural equivalent types before passing it as vararg to
printf like functions (format in my case). Added lit config file
depending on AMDGPU target as the testcase uses assembler.
Differential revision: http://reviews.llvm.org/D16998
llvm-svn: 265645
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
This reverts commit r265550. There're problems with endianness on dumping instruction bytes. Need to find out how to use support::ulittle32_t type properly.
llvm-svn: 265554
Some Include What You Use suggestions were used too.
Use anonymous namespaces in source files.
Differential revision: http://reviews.llvm.org/D18778
llvm-svn: 265454
To start with, handle DW_FORM_string names. Follow up commit will handle
the interesting quirk with type units I was originally aiming for here.
llvm-svn: 265452
Remove a default parameter value being passed unnecessarily, which
also reduces the changes required when this parameter is changed in
D18763.
Document the remaining non-default bool value passed for another
parameter.
llvm-svn: 265348
Support seeding a ValueMap with nullptr for Metadata entries, a
situation I didn't consider in the Metadata/Value split.
I added a ValueMapper::getMappedMD accessor that returns an
Optional<Metadata*> with the mapped (possibly null) metadata. IRMover
needs to use this to avoid modifying the map when it's checking for
unneeded subprograms. I updated a call from bugpoint since I find the
new code clearer.
llvm-svn: 265228
This allows the linker to instruct ThinLTO to perform only the
optimization part or only the codegen part of the process.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265113
This is intended to be used for ThinLTO incremental build.
Differential Revision: http://reviews.llvm.org/D18213
This is a recommit of r265095 after fixing the Windows issues.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265111
This reverts commit r265096, r265095, and r265094.
Windows build is broken, and the validation does not pass.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265102
This is intended to be used for ThinLTO incremental build.
Differential Revision: http://reviews.llvm.org/D18213
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265095
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/nm.html .
1) For Mach-O files the code was not printing the values in hex as is the default.
2) The values printed had leading zeros which they should not have.
3) The address for undefined symbols was printed as spaces instead of 0.
4) With the -A option with posix output for an archive did not use square
brackets around the archive member name.
rdar://25311883 and rdar://25299678
llvm-svn: 264778
Personality is copied as part of copyFunctionAttributes, but it is
invalid on a declaration. Remove the personality attribute it the
function body is not cloned.
Also add a verifier run over output modules in the llvm-split tool.
llvm-svn: 264667
A DICompileUnit that is not listed in llvm.dbg.cu will cause assertion
failures and/or crashes in the backend. The Verifier should reject this.
rdar://problem/25369499
llvm-svn: 264657
Spiritually reapply commit r264409 (reverted in r264410), albeit with a
bit of a redesign.
Firstly, avoid splitting the big blob into multiple chunks of strings.
r264409 imposed an arbitrary limit to avoid a massive allocation on the
shared 'Record' SmallVector. The bug with that commit only reproduced
when there were more than "chunk-size" strings. A test for this would
have been useless long-term, since we're liable to adjust the chunk-size
in the future.
Thus, eliminate the motivation for chunk-ing by storing the string sizes
in the blob. Here's the layout:
vbr6: # of strings
vbr6: offset-to-blob
blob:
[vbr6]: string lengths
[char]: concatenated strings
Secondly, make the output of llvm-bcanalyzer readable.
I noticed when debugging r264409 that llvm-bcanalyzer was outputting a
massive blob all in one line. Past a small number, the strings were
impossible to split in my head, and the lines were way too long. This
version adds support in llvm-bcanalyzer for pretty-printing.
<STRINGS abbrevid=4 op0=3 op1=9/> num-strings = 3 {
'abc'
'def'
'ghi'
}
From the original commit:
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
llvm-svn: 264551
If you're building dwps from other dwps, it can be hard to track down a
duplicate CU ID if it comes from two compilations of the same file in
different modes, etc. By including the .dwo path (which is hopefully
more unique than the file path) it can help track down where the
duplicates came from.
llvm-svn: 264520
Optimize output of MDStrings in bitcode. This emits them in big blocks
(currently 1024) in a pair of records:
- BULK_STRING_SIZES: the sizes of the strings in the block, and
- BULK_STRING_DATA: a single blob, which is the concatenation of all
the strings.
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
I needed to add support for blobs to streaming input to get the test
suite passing.
- StreamingMemoryObject::getPointer reads ahead and returns the
address of the blob.
- To avoid a possible reallocation of StreamingMemoryObject::Bytes,
BitstreamCursor::readRecord needs to move the call to JumpToEnd
forward so that getPointer is the last bitstream operation.
llvm-svn: 264409
The motivation for MODULE_CODE_METADATA_VALUES was to enable an
-flto=thin scheme where:
1. First, one function is cherry-picked from a bitcode file.
2. Later, another function is cherry-picked.
3. Later, ...
4. Finally, the metadata needed by all the previous functions is
loaded.
This was abandoned in favour of:
1. Calculate the superset of functions needed from a Module.
2. Link all functions at once.
Delayed metadata reading no longer serves a purpose. It also adds
a few complication, since we can't count on metadata being properly
parsed when exiting the BitcodeReader. After discussing with Teresa, we
agreed to remove it.
The code that depended on this was removed/updated in r264326.
llvm-svn: 264378
Going to be reading the DW_AT_GNU_dwo_name shortly as well, and there
was already enough duplication here that it was worth refactoring
rather than adding even more.
llvm-svn: 264350
Summary:
Using leading zeroes allows you to search for "000%" to find non-covered
items.
Differential Revision: http://reviews.llvm.org/D18420
llvm-svn: 264336
Summary:
Use bulk importing so we can avoid the use of post-pass metadata
linking. Cloned the ModuleLazyLoaderCache from the FunctionImport pass
to facilitate this.
Reviewers: joker.eph
Subscribers: dexonsmith, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18455
llvm-svn: 264326
The patch supports common STV_xxx visibility flags and MIPS specific
STO_MIPS_xxx flags.
Differential Revision: http://reviews.llvm.org/D18447
llvm-svn: 264300
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
MCContext shouldn't be accessing the filesystem - that's a gross
layering violation and makes it awkward to use as a library or in a
daemon where it may not even be allowed filesystem access.
The CWD lookup here is normally redundant anyway, since the calling
context either also looks up the CWD or sets this to something more
specific. Here, we fix up the one caller that doesn't already set up a
debug compilation dir and make it clear that the responsibility for
such set up is in the users of MCContext.
llvm-svn: 264109
In executable and shared object ELF files, relocations in the file contain the final virtual address rather than section offset so this is adjusted to display section offset.
Differential revision: http://reviews.llvm.org/D15965
llvm-svn: 263971
Summary: Also expose getters and setters in the C API, so that the change can be tested.
Reviewers: nhaehnle, axw, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18260
From: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
llvm-svn: 263886
Summary:
ThinLTO is relying on linkInModule to import selected function.
However a lot of "magic" was hidden in linkInModule and the IRMover,
who would rename and promote global variables on the fly.
This is moving to an approach where the steps are decoupled and the
client is reponsible to specify the list of globals to import.
As a consequence some test are changed because they were relying on
the previous behavior which was importing the definition of *every*
single global without control on the client side.
Now the burden is on the client to decide if a global has to be imported
or not.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18122
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263863
On Rafael's suggestion!
(also fix a discrepancy between this error message format and the others)
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263860
Now that the resolved path cache stores the StringRef's, its
best to just always cache the results, even when realpath isn't
used. This way we'll still avoid the StringMap hashing and lookup.
This also conveniently reorganises this code in a way I need for
a future patch.
llvm-svn: 263777
ResolvedPaths was storing std::string's as a cache. We would then take those strings and look them up in the internString pool to get a unique StringRef for each path.
This patch changes ResolvedPaths to store the StringRef pointing in to the internString pool itself. This way, when getResolvedPath returns a string, we know we have the StringRef we would find in the pool anyway. We can avoid the duplicate memory of the std::string's, and also the time from the lookup.
Unfortunately my profiles show no runtime change here, but it should still save memory allocations which is nice.
Reviewed by Frederic Riss.
Differential Revision: http://reviews.llvm.org/D18259
llvm-svn: 263774
It might be hard to recognize a hexadecimal number without '0x' prefix.
Besides that '0x' prefix corresponds to GNU objdump behaviour.
Differential Revision: http://reviews.llvm.org/D18207
llvm-svn: 263705
The section alignment field was marked optional but not provided a
default value: initialize it with 0.
While we are here, ensure that the section alignment is plausible.
llvm-svn: 263692
Annoyingly, ErrorOr allows to *not check* the error when things go
well. It will crash badly when there is an error though. It should
runtime assert when it is used without being checked!
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263577
The PE TLS directory contains information about where the TLS data
resides in the image, what functions should be executed when threads are
created, etc.
llvm-svn: 263537
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
(Resubmitting after fixing missing file issue)
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263513
If anybody is actually using this, it probably doesn't do what they
think it does. This actually causes the dylib to *export* a
__cxa_atexit symbol, so anything that links it probably loses their
exit time destructors as well as disabling LLVM's.
This just removes the option entirely. If somebody does need this
behaviour we should figure out a more principled way to do it.
This is effectively a revert of r223805.
llvm-svn: 263498
Summary:
llvm-config --libs does not produce correct output since commit r260263
(llvm-config: Add preliminary Windows support) changed naming format of
the libraries. This patch updates llvm-config to recognize new naming
format and output correct linker flags.
Ref: https://llvm.org/bugs/show_bug.cgi?id=26581
Patch by Vedran Miletić
Reviewers: ehsan, rnk, pxli168
Subscribers: pxli168
Differential Revision: http://reviews.llvm.org/D17300
llvm-svn: 263497
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263490
Summary:
Caller can provides the list of .so files where some files are
unreadable (e.g linux-vdso.so.1). It's more convenient to handler this in
sancov with warning then making all callers to check files.
Reviewers: aizatsky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18103
llvm-svn: 263307
Summary:
This patch adds support for including a full reference graph including
call graph edges and other GV references in the summary.
The reference graph edges can be used to make importing decisions
without materializing any source modules, can be used in the plugin
to make file staging decisions for distributed build systems, and is
expected to have other uses.
The call graph edges are recorded in each function summary in the
bitcode via a list of <CalleeValueIds, StaticCount> tuples when no PGO
data exists, or <CalleeValueId, StaticCount, ProfileCount> pairs when
there is PGO, where the ValueId can be mapped to the function GUID via
the ValueSymbolTable. In the function index in memory, the call graph
edges reference the target via the CalleeGUID instead of the
CalleeValueId.
The reference graph edges are recorded in each summary record with a
list of referenced value IDs, which can be mapped to value GUID via the
ValueSymbolTable.
Addtionally, a new summary record type is added to record references
from global variable initializers. A number of bitcode records and data
structures have been renamed to reflect the newly expanded scope of the
summary beyond functions. More cleanup will follow.
Reviewers: joker.eph, davidxl
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17212
llvm-svn: 263275
This was originally a pointer to support pass managers which didn't use
AnalysisManagers. However, that doesn't realistically come up much and
the complexity of supporting it doesn't really make sense.
In fact, *many* parts of the pass manager were just assuming the pointer
was never null already. This at least makes it much more explicit and
clear.
llvm-svn: 263219
LLVM Gold plugin decides which instance of a common symbol it wants
based on the symbol size in claim_file_hook. If the file that
contains the chosen instance is later dropped from the link, we end
up with an undefined reference.
This change delays this decision until the set of the included files
is known.
llvm-svn: 263180
location in the opt tool to live along side the analysis in LLVM's
libraries.
No functionality changed here, but this will allow me to port the
printer to the new pass manager as well.
llvm-svn: 263101
opt adds Verifier passes in AddOptimizationPasses even if
-disable-verify is on. Fix it so that the extra verification occurs
either when (1) -disable-verifier is off, or (2) -verify-each is on.
Thanks to David Jones for pointing out this behavior!
llvm-svn: 263090
Summary:
This is intended to be a performance flag, on the same level as clang
cc1 option "--disable-free". LLVM will never initialize it by default,
it will be up to the client creating the LLVMContext to request this
behavior. Clang will do it by default in Release build (just like
--disable-free).
"opt" and "llc" can opt-in using -disable-named-value command line
option.
When performing LTO on llvm-tblgen, the initial merging of IR peaks
at 92MB without this patch, and 86MB after this patch,setNameImpl()
drops from 6.5MB to 0.5MB.
The total link time goes from ~29.5s to ~27.8s.
Compared to a compile-time flag (like the IRBuilder one), it performs
very close. I profiled on SROA and obtain these results:
420ms with IRBuilder that preserve name
372ms with IRBuilder that strip name
375ms with IRBuilder that preserve name, and a runtime flag to strip
Reviewers: chandlerc, dexonsmith, bogner
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17946
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263086
It is a transitive dependency, so static build are OK but not build
with individual DSO for each LLVM library.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 262987
This is intended to provide a parallel (threaded) ThinLTO scheme
for linker plugin use through the libLTO C API.
The intent of this patch is to provide a first implementation as a
proof-of-concept and allows linker to start supporting ThinLTO by
definiing the libLTO C API. Some part of the libLTO API are left
unimplemented yet. Following patches will add support for these.
The current implementation can link all clang/llvm binaries.
Differential Revision: http://reviews.llvm.org/D17066
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 262977
Summary: I left --build-system for backwards compat, in case there are scripts using it. Feel free to ask for its removal too.
Reviewers: chapuni, tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17886
llvm-svn: 262924
The split code gen task ID should not be appended to save-temps output
file when the parallelism factor is 1 (not actually splitting).
llvm-svn: 262731
Summary:
Since IR files are all compiled into separate independent object files
in ThinLTO mode, the prevailing linkonce symbols must be emitted in its
object file even if it is no longer referenced there, e.g. if no
references remain in the module after inlining, since it may be
referenced by another ThinLTO compiled object file. This is done by
changing LDPR_PREVAILING_DEF_IRONLY* symbols to LDPR_PREVAILING_DEF,
which converts the prevailing linkonce to weak. We also don't need the
other prevailing IRONLY handling for internalization, which is not
currently performed for ThinLTO.
Test case included.
Reviewers: davidxl, rafael
Subscribers: rafael, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16173
llvm-svn: 262727
Summary:
Launch ThinLTO backends (LTO and codegen pipelines with importing) in
parallel using a ThreadPool, after creating the combined index.
The number of threads is controlled by the existing -jobs gold plugin
option, or the hardware concurrency if not specified.
The old behavior of exiting after creating the combined index can be
invoked via a new thinlto-index-only plugin option.
This commit involves just the ThinLTO-specific pieces of D15390, the NFC
and other restructuring pieces were committed independently:
r262677: Add hardware_concurrency interface to llvm::thread (NFC)
r262719: Change split code gen to use ThreadPool
r262721: Refactor gold-plugin codegen to prepare for ThinLTO threads (NFC)
Reviewers: pcc, joker.eph, rafael
Subscribers: rafael, davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D15390
llvm-svn: 262724
This is the NFC part remaining from D15390, which refactors the
current codegen() into a CodeGen class with various modular methods and
other helper functions that will be used by the follow-on ThinLTO piece.
llvm-svn: 262721
Gold has a newly added LDPT_GET_SYMBOLS_V3 callback that can
distinguish between a module that is not included in the link, and
one that is included but has its entire interface preempted by others.
Fixes PR26674.
llvm-svn: 262676
Function lto_module_create_in_local_context() would previously
rely on the default LLVMContext being created for it by
LTOModule::makeLTOModule(). This context exits the program on
error and is not arranged to update sLastStringError in
tools/lto/lto.cpp.
Function lto_module_create_in_local_context() now creates an
LLVMContext by itself, sets it up correctly to its needs and then
passes it to LTOModule::createInLocalContext() which takes
ownership of the context and keeps it present for the lifetime of
the returned LTOModule.
Function LTOModule::makeLTOModule() is modified to take a
reference to LLVMContext (instead of a pointer) and no longer
creates a default context when nullptr is passed to it. Method
LTOModule::createInContext() that takes a pointer to LLVMContext
is removed because it allows to pass a nullptr to it. Instead
LTOModule::createFromBuffer() (that takes a reference to
LLVMContext) should be used.
Differential Revision: http://reviews.llvm.org/D17715
llvm-svn: 262330
This is needed to connect dependencies between the LLVMgold plugin and the clang stage-2 builds due to limitations in ExternalProject_Add.
Patch by Mike Edwards
Differential Revision: http://reviews.llvm.org/D17655
llvm-svn: 262067
These diagnostics aren't perfect - in the case of merging several dwos
into dwps and those dwps into more dwps - just getting the message about
the original source file name might not be much help (since it's the
same in both dwos, by definition - but doesn't tell you which chain of
dwps to backtrack)
It might be worth adding the DW_AT_dwo_id to the split debug info to
improve the diagnostic experience - might help track down the duplicates
better.
llvm-svn: 261988
Though a bit odd, this is handy for a few reasons - for example, in a
build system that wants consistent input/output of build steps, but
where split-dwarf might be overriden/disabled by the user on a per-file
basis.
llvm-svn: 261987
This creates the new-style LoopPassManager and wires it up with dummy
and print passes.
This version doesn't support modifying the loop nest at all. It will
be far easier to discuss and evaluate the approaches to that with this
in place so that the boilerplate is out of the way.
llvm-svn: 261831
Figured this would be a problem, but didn't want to jump the gun - large
inputs demonstrate it pretty easily (mostly for type units, but might as
well do the same for CUs too). A random sample 6m27s -> 27s change.
Also, by checking this up-front for CUs (rather than when building the
cu_index) we can probably provide better error messages (see FIXMEs),
hopefully providing the name of the CUs rather than just their
signature.
llvm-svn: 261364
Summary:
This change adds 3 tables to html report:
- list of covered files with number of functions covered.
- list of not covered files
- list of not covered functions.
I tried to put most coverage-calculating functionality into
SourceCoverageData.
Differential Revision: http://reviews.llvm.org/D17421
llvm-svn: 261287
Summary: As per title. There was a lot of part missing in the C API, so I had to extend the invoke and landingpad API.
Reviewers: echristo, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17359
llvm-svn: 261254
This avoids a operator precedence warning for mixing + and | in an
expression. I checked that this matches the definition in the Split
DWARF proposal.
Patch by Cong Liu!
Differential Revision: http://reviews.llvm.org/D17375
llvm-svn: 261207
analysis passes, support pre-registering analyses, and use that to
implement parsing and pre-registering a custom alias analysis pipeline.
With this its possible to configure the particular alias analysis
pipeline used by the AAManager from the commandline of opt. I've updated
the test to show this effectively in use to build a pipeline including
basic-aa as part of it.
My big question for reviewers are around the APIs that are used to
expose this functionality. Are folks happy with pass-by-lambda to do
pass registration? Are folks happy with pre-registering analyses as
a way to inject customized instances of an analysis while still using
the registry for the general case?
Other thoughts of course welcome. The next round of patches will be to
add the rest of the alias analyses into the new pass manager and wire
them up here so that they can be used from opt. This will require
extending the (somewhate limited) functionality of AAManager w.r.t.
module passes.
Differential Revision: http://reviews.llvm.org/D17259
llvm-svn: 261197
Modify ProfileSummary class to make it not instrumented profile specific.
Add a new InstrumentedProfileSummary class that inherits from ProfileSummary.
Differential Revision: http://reviews.llvm.org/D17310
llvm-svn: 261119
The dynamic table is also an array of a fixed structure, so it can be
represented with a DynReginoInfo.
No major functionality change. The extra error checking is covered by
existing tests with a broken dynamic program header.
Idea extracted from r260488. I did the extra cleanups.
llvm-svn: 261107
We used to keep both a section and a pointer to the first symbol.
The oddity of keeping a section for dynamic symbols is because there is
a DT_SYMTAB but no DT_SYMTABZ, so to print the table we have to find the
size via a section table.
The reason for still keeping a pointer to the first symbol is because we
want to be able to print relocation tables even if the section table is
missing (it is mandatory only for files used in linking).
With this patch we keep just a DynRegionInfo. This then requires
changing a few places that were asking for a Elf_Shdr but actually just
needed the first symbol.
The test change is to delete the program header pointer.
Now that we use the information of both DT_SYMTAB and .dynsym, we don't
depend on the sh_entsize of .dynsym if we see DT_SYMTAB.
Note: It is questionable if it is worth it putting the effort to report
broken sh_entsize given that in files with no section table we have to
assume it is sizeof(Elf_Sym), but that is for another change.
Extracted from r260488.
llvm-svn: 261099
Original commit message:
[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations.
The bits of r260488 it depends on have been committed.
llvm-svn: 260970
This requires making an error message a bit more generic, but that seems
a reasonable tradeoff.
Extracted from r260488 but simplified a bit.
llvm-svn: 260967
Original messages:
Revert "[readobj] Handle ELF files with no section table or with no program headers."
Revert "[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations."
r260489 depends on r260488 and among other issues r260488 deleted error
handling code.
llvm-svn: 260962
When cmake is run with -DLLVM_ENABLE_PIC=OFF, build fails while
linking shared library libLTO.so, because its dependencies are built
with -fno-PIC. More details here: https://llvm.org/bugs/show_bug.cgi?id=26484.
This diff reverts r252652 (git 9fd4377ddb83aee3c049dc8757e7771edbb8ee71),
which removed check NOT LLVM_ENABLE_PIC before disabling build for libLTO.so.
Patch by Igor Sugak!
Differential Revision: http://reviews.llvm.org/D17049
llvm-svn: 260703
Multi-dso programs result in multiple coverage files dumped of the form
'<module_name>.<pid>.sancov'. When analyzing these coverage files it is
important to use correct corresponding object file.
This change removes the "-obj" sancov flag and lets user specify object
file names alongside coverage files. Sancov tool would match them using
<module_name> part of coverage file and short file name of the object
file.
Corresponding changes:
- compiler-rt: http://reviews.llvm.org/D17171
- docs: http://reviews.llvm.org/D17175
Differential Revision: http://reviews.llvm.org/D17169
llvm-svn: 260628
Summary: This required to add binding to Instruction::removeFromParent so that instruction can be forward declared and then moved at the right place.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17057
llvm-svn: 260597
The rational for this change is that LLVMBuild cannot express conditional
dependencies. Therefore, when we start optionally using GlobalISel library for
say AArch64, without that change, all the tools that use the AArch64 library
would need to explicitly link with GlobalISel when we ask for it.
This does not scale.
Instead, we will set the dependencies between the target and GlobalISel and if
we did not ask to build GlobalISel, the library will just be empty.
Thanks to Chris Bieneman and Mehdi Animi for the idea.
llvm-svn: 260566
This adds support for finding the dynamic table and dynamic symbol table via
the section table or the program header table. If there's no section table an
attempt is made to figure out the length of the dynamic symbol table.
llvm-svn: 260488
This restores commit r260408, along with a fix for a bot failure.
The bot failure was caused by dereferencing a unique_ptr in the same
call instruction parameter list where it was passed via std::move.
Apparently due to luck this was not exposed when I built the compiler
with clang, only with gcc.
llvm-svn: 260442
New option --elf-output-style=LLVM or GNU
Enables -file-headers in readelf style when elf-output-style=GNU
Differential revision: http://reviews.llvm.org/D14128
llvm-svn: 260430
Summary:
This patch uses the lower 64-bits of the MD5 hash of a function name as
a GUID in the function index, instead of storing function names. Any
local functions are first given a global name by prepending the original
source file name. This is the same naming scheme and GUID used by PGO in
the indexed profile format.
This change has a couple of benefits. The primary benefit is size
reduction in the combined index file, for example 483.xalancbmk's
combined index file was reduced by around 70%. It should also result in
memory savings for the index file in memory, as the in-memory map is
also indexed by the hash instead of the string.
Second, this enables integration with indirect call promotion, since the
indirect call profile targets are recorded using the same global naming
convention and hash. This will enable the function importer to easily
locate function summaries for indirect call profile targets to enable
their import and subsequent promotion.
The original source file name is recorded in the bitcode in a new
module-level record for use in the ThinLTO backend pipeline.
Reviewers: davidxl, joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D17028
llvm-svn: 260408
New option --elf-output-style=LLVM or GNU
Enables -file-headers in readelf style when elf-output-style=GNU
Differential revision: http://reviews.llvm.org/D14128
llvm-svn: 260391
This patch uses one bit in profile version to differentiate Clang
instrumentation and IR level instrumentation profiles.
PGOInstrumenation generates a COMDAT variable __llvm_profile_raw_version so
that the compiler runtime can set the right profile kind.
For Maco-O platform, we generate the variable as linkonce_odr linkage as
COMDAT is not supported.
PGOInstrumenation now checks this bit to make sure it's an IR level
instrumentation profile.
The patch was submitted as r260164 but reverted due to a Darwin test breakage.
Original Differential Revision: http://reviews.llvm.org/D15540
Differential Revision: http://reviews.llvm.org/D17020
llvm-svn: 260385
This patch adds a new class, OrcI386, which contains the hooks needed to
support lazy-JITing on i386 (currently only for Pentium 2 or above, as the JIT
re-entry code uses the FXSAVE/FXRSTOR instructions).
Support for i386 is enabled in the LLI lazy JIT and the Orc C API, and
regression and unit tests are enabled for this architecture.
llvm-svn: 260338
Summary: As per title. This also include extra support for insertvalue and extracvalue.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17055
llvm-svn: 260335
Summary: As per title. This remove the need to rely on internal knowledge of call and invoke instruction to find called value and argument count.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Differential Revision: http://reviews.llvm.org/D17054
llvm-svn: 260332
Summary: This is a bit of refactoring required to be able to generate instruction in forward basic block. This, for instance, is a requirement for phi in loops.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Differential Revision: http://reviews.llvm.org/D17050
llvm-svn: 260324
Summary: As per title. Also add a facility method to get the name of a basic block from the C API.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16912
llvm-svn: 260309
This reverts commit r259578.
There are enough issues with this small patch that it is better to
revert and then commit a fixed version (will be committed shortly).
llvm-svn: 260285
Summary:
This patch adds Windows support for a few of the llvm-config commands,
including cflags, ldflags, libs, and system-libs.
Currently llvm-config is untested, so this patch adds tests for the
commands that it fixes as well.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16762
llvm-svn: 260263
It is possible to have .got section and one or more zero-sized section
at the same address. This patch first checks that GOT (or GOT PLT)
section should have non-zero size using corresponding dynamic tags. Then
it looks up not empty section at the specified address.
Differential Revision: http://reviews.llvm.org/D16968
llvm-svn: 260245
It was using format() with a string for 64-bit types but was
passed a 32-bit type in places when printing values for
32-bit Mach-O files.
rdar://24542509
llvm-svn: 260243
This patch uses one bit in profile version to differentiate Clang
instrumentation and IR level instrumentation profiles.
PGOInstrumenation generates a COMDAT variable __llvm_profile_raw_version so
that the compiler runtime can set the right profile kind.
PGOInstrumenation now checks this bit to make sure it's an IR level
instrumentation profile.
Differential Revision: http://reviews.llvm.org/D15540
llvm-svn: 260146
a significant fraction of the file size (for files that otherwise have few
records). Also include an average size per record in the summary information.
llvm-svn: 259965
This makes it less likely to clash with other stuff that might be linked
in by change, e.g. ncurses exposes an external function called simply
"echo", so linking ncurses statically into the binary explodes in funny
ways.
llvm-svn: 259882
Summary: This diff increase the tested surface of the C API.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16910
llvm-svn: 259863
Summary: As per title. It is required and don't get linked in in some builds.
Reviewers: chapuni, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16903
llvm-svn: 259853
Summary computation is not just for instrumented profiling and so I have moved
the ProfileSummary class to ProfileCommon.h (named so to allow code unrelated
to summary but common to instrumented and sampled profiling to be placed there)
Differential Revision: http://reviews.llvm.org/D16661
llvm-svn: 259846
Summary:
This basically add an echo test case in C. The support is limited right now, but full support would just be too much to review at once.
The echo test case simply get a module as input and try to output the same exact module. This allow to check the both reading and writing API are working as expected.
I want to improve this test over time to support more and more of the API, in order to improve coverage (coverage is quite poor right now).
Test Plan: Run the test.
Reviewers: chandlerc, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10725
llvm-svn: 259844
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
llvm-svn: 259535
Noticed while working on scattered relocations.
I do not think these relocs can actually happen in the debug_info section,
but if they happen the code would mishandle them. Explicitely skip them
and warn if we encounter one.
llvm-svn: 259341
Although it seems like clang will never emit scattered relocations in
the debug information (at least I couldn't find a way), we have too
support them for the benefit of other compilers.
As clang doesn't generate them, the included testcase was produced
from hacked up assembly.
llvm-svn: 259339
llvm-dsymutil was misinterpreting the value of common symbols as their
address when it actually contains their size. This didn't impact
llvm-dsymutil's ability to link the debug information for common symbols
because these are always found by name and not by address. Things could
however go wrong when the size of a common object matched the object
file address of another symbol. Depending on the link order of the symbols
the common object might incorrectly evict this other object from the
address to symbol mapping, and then link the evicted symbol with a wrong
binary address.
Use the new ability to have symbols without an object file address to fix
this.
llvm-svn: 259318
This change just changes the data structure that ties symbol names,
object file address and linked binary addresses to accept mappings
with no object file address. Such symbol mappings are not fed into
the debug map yet, so this patch is NFC.
A subsequent patch will make use of this functionality for common
symbols.
llvm-svn: 259317
Add an option to llvm-profdata merge for writing out sparse indexed
profiles. These profiles omit InstrProfRecords for functions which are
never executed.
Differential Revision: http://reviews.llvm.org/D16727
llvm-svn: 259258
This patch enables llvm-bcanalyzer to print the bitcode wrapper header
if the file has one, which is needed to test the changes made in
r258627 (bitcode-wrapper-header-armv7m.ll is the test case for r258627).
Differential Revision: http://reviews.llvm.org/D16642
llvm-svn: 259162
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
We already perform it at the beginning of the function so we can't
arrive here with an invalid object. Also, add a test so that bugs
won't sneak in the future.
llvm-svn: 258982
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Adds a way to inspect SHT_GROUP sections in ELF objects.
Displays signature, member sections of these sections.
Differential revision: http://reviews.llvm.org/D16555
llvm-svn: 258845
llvm-objdump when printing the Mach Header to print the unknown
cputype and cpusubtype fields as decimal instead of not printing
them at all. And change the test to check for that.
llvm-svn: 258826
This patch was originally committed as r257885, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258683
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "bad string index" for bad string indexes. Updated the error message
in the llvm-objdump test, and added tests to show llvm-nm prints
"bad string index" and a test to print the actual bad string index value
which in this case is 0xfe000002 when printing the fields as raw hex.
llvm-svn: 258520
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "(?,?)" or just "s" for bad section indexes. Also added a test to show
it prints the bad section index of "42" when printing the fields as raw hex.
llvm-svn: 258434
Summary:
Add components back into calls to llvm-config,
which was accidentally removed in r258283.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16392
llvm-svn: 258383
This patch adds the necessary plumbing to cmake to build the sources related to
GlobalISel.
To build the sources related to GlobalISel, we need to add -DBUILD_GLOBAL_ISEL=ON.
By default, this is OFF, thus GlobalISel sources will not impact people that do
not explicitly opt-in.
Differential Revision: http://reviews.llvm.org/D15983
llvm-svn: 258344
Some architecture specific ELF section flags might have the same value
(for example SHF_X86_64_LARGE and SHF_HEX_GPREL) and we have to check
machine architectures to select an appropriate set of possible flags.
The patch selects architecture specific flags into separate arrays
`ElfxxxSectionFlags` and combines `ElfSectionFlags` and `ElfxxxSectionFlags`
before pass to the `StreamWriter::printFlags()` method.
Differential Revision: http://reviews.llvm.org/D16269
llvm-svn: 258334
This addresses PR26060 where function lto_module_create() could return nullptr
but lto_get_error_message() returned an empty string.
The error() call after LTOModule::createFromFile() in llvm-lto is then removed
because any error from this function should go through the diagnostic handler in
llvm-lto which will exit the program. The error() call was added because this
previously did not happen when the file was non-existent. This is fixed by the
patch. (The situation that llvm-lto reports an error when the input file does
not exist is tested by llvm/tools/llvm-lto/error.ll).
Differential Revision: http://reviews.llvm.org/D16106
llvm-svn: 258298
Summary:
This is a re-commit of r257003, which was reverted,
along with the fixes from http://reviews.llvm.org/D15986.
r252532 added support for reporting the monolithic library
when LLVM_BUILD_LLVM_DYLIB is used. This would only be done
if the individual components were not found, and the dynamic
library is found.
This diff extends this as follows:
- If LLVM_LINK_LLVM_DYLIB is set, then prefer the shared
library, even if all component libraries exist.
- Two flags, --link-shared and --link-static are introduced
to provide explicit guidance. If --link-shared is passed
and the shared library does not exist, an error results.
Additionally, changed the expected shared library names from
(e.g.) LLVM-3.8.0 to LLVM-3.8. The former exists only in an
installation (and then only in CMake builds I think?), and not
in the build tree; this breaks usage of llvm-config during
builds, e.g. by llvm-go.
Reviewers: DiamondLovesYou, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15986
llvm-svn: 258283
Summary:
Currently llvm::SplitModule as the first step globalizes all local objects, which might not be desirable in some scenarios.
This change adds a new flag to llvm::SplitModule that uses SCC approach to search for a balanced partition without the need to externalize symbols.
Such partition might not be possible or fully balanced for a given number of partitions, and is a function of the module properties (global/local dependencies within the module).
Joint development Tobias Edler von Koch (tobias@codeaurora.org) and Sergei Larin (slarin@codeaurora.org)
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D16124
llvm-svn: 258083
MIPS 32-bit ABI uses REL relocation record format to save dynamic
relocations. The patch teaches llvm-readobj to show dynamic relocations
in this format.
Differential Revision: http://reviews.llvm.org/D16114
llvm-svn: 258001
Entry block count was not counted and is corrected. Also
introduce a new metric that is MaxInternalBlockCount which
show command shows (as before).
llvm-svn: 257987
This is part of a new statistics gathering feature for the sanitizers.
See clang/docs/SanitizerStats.rst for further info and docs.
Differential Revision: http://reviews.llvm.org/D16174
llvm-svn: 257970
This reverts commit r257751, bringing back r256105.
The problem the assert found was fixed in r257915.
Original commit message:
Assert that we have all use/users in the getters.
An error that is pretty easy to make is to use the lazy bitcode reader
and then do something like
if (V.use_empty())
The problem is that uses in unmaterialized functions are not accounted
for.
This patch adds asserts that all uses are known.
llvm-svn: 257920
# The first commit's message is:
Revert "[ARM] Add DSP build attribute and extension targeting"
This reverts commit b11cc50c0b4a7c8cdb628abc50b7dc226ff583dc.
# This is the 2nd commit message:
Revert "[ARM] Add new system registers to ARMv8-M Baseline/Mainline"
This reverts commit 837d08454e3e5beb8581951ac26b22fa07df3cd5.
llvm-svn: 257916
Added forgotten ELFDumper.cpp to commit.
Initial commit message:
[llvm-readobj] Add support for TLSDESC_PLT and TLSDESC_GOT dynamic section tags to the llvm-readobj.
If module uses uses lazy TLSDESC relocations it should define DT_TLSDESC_PLT and DT_TLSDESC_GOT entries.
They were unknown for llvm-readobj before this patch.
Differential revision: http://reviews.llvm.org/D16224
llvm-svn: 257914
classes.
OrcRemoteTargetClient::RCMemoryManager will now register EH frames with the
server automatically. This allows remote-execution of code that uses exceptions.
llvm-svn: 257816
These fields are almost always zero. However, there are relocations
against them, and we should print the relocation symbol with it as
SYM+0xNN.
llvm-svn: 257776
Binary annotations are encoded along the lines of UTF-8 and ECI but with
a few minor differences.
The algorithm specified in "ECMA-335 CLI Section II.3.2 - Blobs and
Signatures" is used to compress binary annotations. Signed binary
annotations are encoded like unsigned annotations except the sign bit is
rotated left to reduce the number of bits needed to be encoded.
llvm-svn: 257742
Moves some .def files into include/DebugInfo/CodeView.
Aslo remove a 'using namespace' directive from a header in readobj and
update the uses of the endian helper types to compensate.
llvm-svn: 257712
This adds a detailed profile summary in llvm-profdata. The summary is in the
form of one or more triples of the form (P, N, M) which is interpreted as if
we look at the Top-N counts in the profile, their sum accounts for P percentage
of the sum of all counts in the program and the minimum count in the Top-N is M.
Differential Revision: http://reviews.llvm.org/D16005
llvm-svn: 257680
This rewrites and expands the existing codeview dumping functionality in
llvm-readobj using techniques similar to those in lib/Object. This defines a
number of new records and enums useful for reading memory mapped codeview
sections in COFF objects.
The dumper is intended as a testing tool for LLVM as it grows more codeview
output capabilities.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D16104
llvm-svn: 257658
When we arrive at the end of the function, the validation of
the object has been done already. In theory, so, we should never
arrive here with something broken as the object isn't mutated.
Practice sometimes proves theory to be wrong, so leave an assertion
instead, as suggested by David Blaikie, to catch bugs.
llvm-svn: 257570
This change has us print out fields we didn't previously understand. To
improve readability, we now group column information with it's
respective line.
llvm-svn: 257552
to only print the first private header.
Which for Mach-O files only prints the Mach header and not the subsequent load
commands. Which is used by scripts to match what the darwin otool(1) with the
-h flag does without the -l flag.
For non-Mach-O files it has the same functionality as -private-headers (with
the trailing ’s’).
rdar://24158331
llvm-svn: 257548
A request has been made to the official registry, but an official value is
not yet available. This patch uses a temporary value in order to support
development. When an official value is recieved, the value of EM_WEBASSEMBLY
will be updated.
llvm-svn: 257517
The new ORC remote-JITing support provides a superset of the old code's
functionality, so we can replace the old stuff. As a bonus, a couple of
previously XFAILed tests have started passing.
llvm-svn: 257343
Summary:
r252532 added support for reporting the monolithic library
when LLVM_BUILD_LLVM_DYLIB is used. This would only be done
if the individual components were not found, and the dynamic
library is found.
This diff extends this as follows:
- If LLVM_LINK_LLVM_DYLIB is set, then prefer the shared
library, even if all component libraries exist.
- Two flags, --link-shared and --link-static are introduced
to provide explicit guidance. If --link-shared is passed
and the shared library does not exist, an error results.
Additionally, changed the expected shared library names from
(e.g.) LLVM-3.8.0 to LLVM-3.8. The former exists only in an
installation (and then only in CMake builds I think?), and not
in the build tree; this breaks usage of llvm-config during
builds, e.g. by llvm-go.
Reviewers: DiamondLovesYou, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15033
llvm-svn: 257003
This replicates the logic of Darwin dwarfdump for manually opening up
.dSYM bundles without introducing any new dependencies.
<rdar://problem/20491670>
llvm-svn: 256350
It turns out that his is *really* slow. With this change the link of
clang with plugin-opt=emit-llvm goes from 41 to 26 seconds.
We can add an option to enable it again if needed.
llvm-svn: 256302
Today, we always take into account the possibility that object files
produced by MC may be consumed by an incremental linker. This results
in us initialing fields which vary with time (TimeDateStamp) which harms
hermetic builds (e.g. verifying a self-host went well) and produces
sub-optimal code because we cannot assume anything about the relative
position of functions within a section (call sites can get redirected
through incremental linker thunks).
Let's provide an MCTargetOption which controls this behavior so that we
can disable this functionality if we know a-priori that the build will
not rely on /incremental.
llvm-svn: 256203
With the support of value profiling added, the Indexed prof
reader gets less efficient. The prof reader initialization
used to be just reading the file header, but with VP support
added, initialization needs to walk through all profile keys
of ondisk hash table resulting in very poor locality and large
memory increase (keys are stored together with the profile data
in the mapped profile buffer). Even worse, when the reader is
used by the compiler (not llvm-profdata too), the penalty becomes
very high as compilation of each single module requires touching
profile data buffer for the whole program.
In this patch, the icall target values (MD5hash) are no longer eargerly
converted back to name strings when the data is read into memory. New
interface is added to to profile reader so that InstrProfSymtab can be
lazily created for Indexed profile reader on-demand. Creating of the
symtab is intended to be used by llvm-profdata tool for symbolic dumping
of VP data. It can be used with compiler (for legacy out of tree uses)
too but not recommended due to compile time and memory reasons
mentioned above.
Some other cleanups are also included: Function Addr to md5 map is now
consolated into InstrProfSymtab. InstrProfStringtab is no longer used and
eliminated.
llvm-svn: 256114
An error that is pretty easy to make is to use the lazy bitcode reader
and then do something like
if (V.use_empty())
The problem is that uses in unmaterialized functions are not accounted
for.
This patch adds asserts that all uses are known.
llvm-svn: 256105
This deprecates:
* LLVMParseBitcode
* LLVMParseBitcodeInContext
* LLVMGetBitcodeModuleInContext
* LLVMGetBitcodeModule
They are replaced with the functions with a 2 suffix which do not record
a diagnostic.
llvm-svn: 256065
This inlines materializeAll into the only caller
(materializeAllPermanently) and renames materializeAllPermanently to
just materializeAll.
llvm-svn: 256024
LLVM MC has single methods which can handle the output of EH frame and DWARF CIE's and FDE's.
This code improves DWARFDebugFrame::parse to do the same for parsing.
This also allows llvm-objdump to support the --dwarf=frames option which objdump supports. This
option dumps the .eh_frame section using the new code in DWARFDebugFrame::parse.
http://reviews.llvm.org/D15535
Reviewed by Rafael Espindola.
llvm-svn: 256008
Type specific declarations have been moved to Type.h and error handling
routines have been moved to ErrorHandling.h. Both are included in Core.h
so nothing should change for projects directly including the headers,
but transitive dependencies may be affected.
llvm-svn: 255965
Summary:
Second patch split out from http://reviews.llvm.org/D14752.
Maps metadata as a post-pass from each module when importing complete,
suturing up final metadata to the temporary metadata left on the
imported instructions.
This entails saving the mapping from bitcode value id to temporary
metadata in the importing pass, and from bitcode value id to final
metadata during the metadata linking postpass.
Depends on D14825.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14838
llvm-svn: 255909
Summary: Surface counter overflow when merging profile data. Merging still occurs on overflow but counts saturate to the maximum representable value. Overflow is reported to the user.
Reviewers: davidxl, dnovillo, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15547
llvm-svn: 255825
Summary:
Using the blacklist the user can filter own unwanted functions
from all outputs. By default blacklist contains "fun:__sancov*" line.
Differential Revision: http://reviews.llvm.org/D15364
llvm-svn: 255732
Summary:
This change adds support for specifying a weight when merging profile data with the llvm-profdata tool.
Weights are specified by using the --weighted-input=<weight>,<filename> option. Input files not specified
with this option (normal positional list after options) are given a default weight of 1.
Adding support for arbitrary weighting of input profile data allows for relative importance to be placed on the
input data from multiple training runs.
Both sampled and instrumented profiles are supported.
Reviewers: davidxl, dnovillo, bogner, silvas
Subscribers: silvas, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D15306
llvm-svn: 255659
The symbol being printed in this field comes from the main symbol table,
not 0xF1 subsection. Use LinkageName to make that a lot clearer.
llvm-svn: 255596
This patch converts code that has access to a LLVMContext to not take a
diagnostic handler.
This has a few advantages
* It is easier to use a consistent diagnostic handler in a single program.
* Less clutter since we are not passing a handler around.
It does make it a bit awkward to implement some C APIs that return a
diagnostic string. I will propose new versions of these APIs and
deprecate the current ones.
llvm-svn: 255571
This code adds some simple decoding of the FDE's in an eh_frame.
There's still more to be done in terms of error handling and verification.
Also, we need to be able to decode the CFI's.
llvm-svn: 255550
This is the start of work to dump the contents of the eh_frame section.
It currently emits CIE entries. FDE entries will come later.
It also needs improved error checking which will follow soon.
http://reviews.llvm.org/D15502
Reviewed by Kevin Enderby and Lang Hames.
llvm-svn: 255546
It turns out that terminatepad gives little benefit over a cleanuppad
which calls the termination function. This is not sufficient to
implement fully generic filters but MSVC doesn't support them which
makes terminatepad a little over-designed.
Depends on D15478.
Differential Revision: http://reviews.llvm.org/D15479
llvm-svn: 255522
It's O(N^2) because it does a simple walk through the existing types to
find duplicates, but that will be fixed in a follow-up commit to use a
mapping data structure of some kind.
llvm-svn: 255482
While we have successfully implemented a funclet-oriented EH scheme on
top of LLVM IR, our scheme has some notable deficiencies:
- catchendpad and cleanupendpad are necessary in the current design
but they are difficult to explain to others, even to seasoned LLVM
experts.
- catchendpad and cleanupendpad are optimization barriers. They cannot
be split and force all potentially throwing call-sites to be invokes.
This has a noticable effect on the quality of our code generation.
- catchpad, while similar in some aspects to invoke, is fairly awkward.
It is unsplittable, starts a funclet, and has control flow to other
funclets.
- The nesting relationship between funclets is currently a property of
control flow edges. Because of this, we are forced to carefully
analyze the flow graph to see if there might potentially exist illegal
nesting among funclets. While we have logic to clone funclets when
they are illegally nested, it would be nicer if we had a
representation which forbade them upfront.
Let's clean this up a bit by doing the following:
- Instead, make catchpad more like cleanuppad and landingpad: no control
flow, just a bunch of simple operands; catchpad would be splittable.
- Introduce catchswitch, a control flow instruction designed to model
the constraints of funclet oriented EH.
- Make funclet scoping explicit by having funclet instructions consume
the token produced by the funclet which contains them.
- Remove catchendpad and cleanupendpad. Their presence can be inferred
implicitly using coloring information.
N.B. The state numbering code for the CLR has been updated but the
veracity of it's output cannot be spoken for. An expert should take a
look to make sure the results are reasonable.
Reviewers: rnk, JosephTremoulet, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D15139
llvm-svn: 255422
Quoting from the comment added to the code:
// Objective-C on i386 uses artificial absolute symbols to
// perform some link time checks. Those symbols have a fixed 0
// address that might conflict with real symbols in the object
// file. As I cannot see a way for absolute symbols to find
// their way into the debug information, let's just ignore those.
llvm-svn: 255350
Ensure we release the files even when they don't hold a function index
summary section, by restructuring the control flow a little bit.
llvm-svn: 255256
A linker normally has two stages: symbol resolution and "moving stuff".
In lib/Linker there is the complication of lazy linking some globals,
but it was still far more mixed than it needed to.
This splits the linker into a lower level IRMover and the linker proper.
The IRMover just takes a list of globals to move and a callback that
lets the user control what is lazy linked.
The main motivation is that now tools/gold (and soon lld) can use their
own symbol resolution to instruct IRMover what to do.
llvm-svn: 255254
This is a preliminary change towards deduplicating type units based on
their signatures. Next change will skip emission of types when their
signature has already been seen.
llvm-svn: 255154
Summary:
The order of destructors in LTOCodeGenerator gets changed in r254696.
It is possible for LTOCodeGenerator to have a MergedModule created in
the OwnedContext, in which case the module must be destructed before
the context.
Reviewers: rafael, dexonsmith
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D15346
llvm-svn: 255092
Cloning the module was supposed to guard against the possibility
that the passes may be non-idempotent. However, for some reason
I decided to put that AFTER the passes had already run on the
module, defeating the point entirely. Fix that by moving up the
CloneModule as is done in llc.
llvm-svn: 254819
`Out` can be null if no output is requested, so move any access
to it inside the conditional. Thanks to Justin Bogner for finding
this.
llvm-svn: 254804
Before this patch the diagnostic handler was optional. If it was not
passed, the one in the LLVMContext was used.
That is probably not a pattern we want to follow. If each area has an
optional callback, there is a sea of callbacks and it is hard to follow
which one is called.
Doing this also found cases where the callback is a nice addition, like
testing that no errors or warnings are reported.
The other option is to always use the diagnostic handler in the
LLVMContext. That has a few problems
* To implement the C API we would have to set the diag handler and then
set it back to the original value.
* Code that creates the context might be far away from code that wants
the diagnostics.
I do have a patch that implements the second option and will send that as
an RFC.
llvm-svn: 254777
Summary: Lately, I have submitted a number of patches to fix bugs that
only occurred when using the same pass manager to compile multiple
modules (generally these bugs are failure to reset some persistent
state). Unfortunately I don't think there is currently a way to test
that from the command line. This adds a very simple flag to both llc
and opt, under which the tools will simply re-run their respective
pass pipelines using the same pass manager on (a clone of the same
module). Additionally, we verify that both outputs are bitwise the
same.
Reviewers: yaron.keren
Subscribers: loladiro, yaron.keren, kcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D14965
llvm-svn: 254774
This probably shouldn't be generated in the .dwo file for CUs, only for
TUs, but it's in the sample .dwos (generated by clang) so dwp should
reflect that.
Arguably the DWP tool could be smart enough to know that the CUs
shouldn't need a debug_line.dwo section and skip that even when it's
legitimately generated for TUs, but that's a bit more off-book.
llvm-svn: 254767
Summary: The command prints out list of functions that were not entered.
To do this, addresses are first converted to function locations. Set
operations are used for function locations.
Differential Revision: http://reviews.llvm.org/D14889
review
llvm-svn: 254742
This is a continuation of r253367.
These functions return is owned by the caller, so they return
std::unique_ptr now.
The call can fail, so the return is wrapped in ErrorOr.
They have a context where to report diagnostics, so they don't need to
take a string out parameter.
With this there are no call to getGlobalContext in lib/LTO.
llvm-svn: 254721
This class is turning into a useful interface, rather than an implementation
detail, so I'm dropping the 'Base' suffix.
No functional change.
llvm-svn: 254693
This change adds support for an optional weight when merging profile data with the llvm-profdata tool.
Weights are specified by adding an option ':<weight>' suffix to the input file names.
Adding support for arbitrary weighting of input profile data allows for relative importance to be placed on the
input data from multiple training runs.
Both sampled and instrumented profiles are supported.
Reviewers: dnovillo, bogner, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14547
llvm-svn: 254669
There is no real reason the index has to have the concept of an
exporting Module. We should be able to have one single unique
instance of the Index, and it should be read-only after creation
for the whole ThinLTO processing.
The linker plugin should be able to process multiple modules (in
parallel or in sequence) with the same index.
The only reason the ExportingModule was present seems to be to
implement hasExportedFunctions() that is used by the Module linker
to decide what to do with the current Module.
For now I replaced it with a query to the map of Modules path to
see if this module was declared in the Index and consider that if
it is the case then it is probably exporting function.
On the long term the Linker interface needs to evolve and this
call should not be needed anymore.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 254581
This is very rudimentary support for debug_cu_index, but it is enough to
allow llvm-dwarfdump to find the offsets for contributions and
correctly dump debug_info.
It will need to actually find the real signature of the unit and build
the real hash table with the right number of buckets, as per the DWP
specification.
It will also need to be expanded to cover the tu_index as well.
llvm-svn: 254489
For efficiency reason, when importing multiple functions for the same Module,
we can avoid reparsing it every time.
Differential Revision: http://reviews.llvm.org/D15102
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 254486
This doesn't deduplicate strings in the debug_str section, nor does it
properly wire up the index so that debug_info can /find/ these strings,
but it does correct the str_offsets specifically.
Follow up patches to address those related/next issues.
llvm-svn: 254431
This just concatenates the common DWP sections without doing any of the
fancy DWP things like:
1) update str_offsets
2) deduplicating strings
3) merging/creating cu/tu_index
Patches for these will follow shortly.
(also not sure about target triple/object file type for this tool - do I
really need a whole triple just to write an object file that contains
purely static/hardcoded bytes in each section? & I guess I should just
pick it based on the first input, maybe, rather than hardcoding for now
- but we only produce .dwo on ELF platforms with objcopy for now anyway)
llvm-svn: 254355
Now the ValueMapper has two callbacks. The first one maps the
declaration. The ValueMapper records the mapping and then materializes
the body/initializer.
llvm-svn: 254209
GlobalAliases may reference function definitions, but not function declarations.
bugpoint would sometimes create invalid IR by deleting a function's body (thus
mutating a function definition into a declaration) without first 'fixing' any
GlobalAliases that reference that function definition.
This change iteratively prevents that issue. Before deleting a function's body,
it scans the module for GlobalAliases which reference that function. When
found, it eliminates them using replaceAllUsesWith.
Fixes PR20788.
Patch by Nick Johnson!
llvm-svn: 254171
Summary:
This could happen if `GetComponentNames` is true, because `Name` from
`VisitComponent` would reference a stack instance of `std::string` in
`ComputeLibsForComponents`.
Reviewers: beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14913
llvm-svn: 254108
Summary:
For relocation types that are known to not require stub functions, there
is no need to allocate extra space for the stub functions.
Reviewers: lhames, reames, maksfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14676
llvm-svn: 253920
The new option is similar to the SampleProfile dump option.
- dump raw/indexed format into text profile format
- merge the profile and output into text profile format.
Note that Value Profiling data text format is not yet designed.
That functionality will be added later.
Differential Revision: http://reviews.llvm.org/D14894
llvm-svn: 253913
Add a shared helper routine to read the function index from a file
and create/return the function index object. Use it in llvm-link and
llvm-lto.
llvm-svn: 253903
Summary:
Several fixes to the handling of bitcode files without function summary
sections so that they are skipped during ThinLTO processing in llvm-lto
and the gold plugin when appropriate instead of aborting.
1 Don't assert when trying to add a FunctionInfo that doesn't have
a summary attached.
2 Skip FunctionInfo structures that don't have attached function summary
sections when trying to create the combined function summary.
3 In both llvm-lto and gold-plugin, check whether a bitcode file has
a function summary section before trying to parse the index, and skip
the bitcode file if it does not.
4 Fix hasFunctionSummaryInMemBuffer in BitcodeReader, which had a bug
where we returned to early while looking for the summary section.
Also added llvm-lto and gold-plugin based tests for cases where we
don't have function summaries in the bitcode file. I verified that
either the first couple fixes described above are enough to avoid the
crashes, or fixes 1,3,4. But have combined them all here for added
robustness.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14903
llvm-svn: 253796
Summary:
Add a -preserve-modules option to llvm-link that simulates LTO
clients that don't destroy modules as they are linked. This enables
reproduction of a recent bug introduced by a metadata linking change
that was only caught when the modules weren't destroyed before
writing bitcode (LTO on Windows).
See http://llvm.org/viewvc/llvm-project?view=revision&revision=253170
for more details on the original bug and the fix.
Confirmed the new test added here reproduces the failure using the new
option when I suppress the fix.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14818
llvm-svn: 253740
Summary:
This is split out from the ThinLTO metadata mapping patch
http://reviews.llvm.org/D14752.
To avoid needing to parse the module level metadata during function
importing, a new module-level record is added which holds the
number of module-level metadata values. This is required because
metadata value ids are assigned implicitly during parsing, and the
function-level metadata ids start after the module-level metadata ids.
I made a change to this version of the code compared to D14752
in order to add more consistent and thorough assertion checking of the
new record value. We now unconditionally use the record value to
initialize the MDValueList size, and handle it the same in parseMetadata
for all module level metadata cases (lazy loading or not).
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14825
llvm-svn: 253668
This introduces two new options:
- "llvm-lto -save-merged-module -o outfile" dumps the LTO Module to
outfile.merged.bc prior to CodeGen and after LTO optimizations have been run.
- "llvm-lto -filetype=asm -o outfile" makes llvm-lto emit assembly instead of
object code in outfile.
Both are intended for use in lit tests.
llvm-svn: 253624
The LLVMContext was only used for Diagnostic. Pass a DiagnosticHandler
instead.
Differential Revision: http://reviews.llvm.org/D14794
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 253540
Most linked executables do not have a symbol table in COFF.
However, it is pretty typical to have some export entries. Use those
entries to inform the disassembler about potential function definitions
and call targets.
llvm-svn: 253429
While still allowing CodeGen/AsmPrinter in llvm to own them using a bump
ptr allocator. (might be nice to replace the pointers there with
something that at least automatically calls their dtors, if that's
necessary/useful, rather than having it done explicitly (I think a typed
BumpPtrAllocator already does this, or maybe a unique_ptr with a custom
deleter, etc))
llvm-svn: 253409
Missed bit of feedback from D14720.
Show the same "Make sure that all profile
data to be merged is generated from the same binary." hint for hash mismatch
and value site count mismatch as we now do for counter mismatch when merging
incompatible instrumentation profile data.
llvm-svn: 253400
Summary:
This change tries to make the root cause of instrumented profile data merge failures clearer.
Previous:
$ llvm-profdata merge test_0.profraw test_1.profraw -o test_merged.profdata
test_1.profraw: foo: Function count mismatch
test_1.profraw: bar: Function count mismatch
test_1.profraw: baz: Function count mismatch
...
Changed:
$ llvm-profdata merge test_0.profraw test_1.profraw -o test_merged.profdata
test_1.profraw: foo: Function basic block count change detected (counter mismatch)
Make sure that all profile data to be merged is generated from the same binary.
test_1.profraw: bar: Function basic block count change detected (counter mismatch)
test_1.profraw: baz: Function basic block count change detected (counter mismatch)
...
Reviewers: dnovillo, davidxl, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14739
llvm-svn: 253384
This patch removes the std::string& argument from a number of C++ LTO API calls
and instead makes them use the installed diagnostic handler. This would also
improve consistency of diagnostic handling infrastructure: if an LTO client used
lto_codegen_set_diagnostic_handler() to install a custom error handler, we do
not want some error messages to go through the custom error handler, and some
other error messages to go into sLastErrorString.
llvm-svn: 253367
Now that setExecutable() changed to do all the ground work to make
memory executable on the host, we can remove all (redundant) calls
to invalidate instruction cache here.
As an added bonus, this makes invalidateInstructionCache() dead
code, so it can be removed.
Differential Revision: http://reviews.llvm.org/D13631
llvm-svn: 253343
Summary:
There are currently two blocks with the METADATA_BLOCK id at module
scope. The first has the module-level metadata values (consisting of
some combination of METADATA_* record codes except for METADATA_KIND).
The second consists only of METADATA_KIND records. The latter is used
only in the METADATA_ATTACHMENT block within function blocks (for
metadata attached to instructions).
For ThinLTO we want to delay the parsing of module level metadata
until all functions have been imported from that module (there is some
bookkeeping used to suture it up when we read it during a post-pass).
However, we do need the METADATA_KIND records when parsing the function
body during importing, since those kinds are used as described above.
To simplify identification and parsing of just the block containing
the metadata kinds, use a different block id (METADATA_KIND_BLOCK_ID).
Support older bitcode without the new block id as well.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14654
llvm-svn: 253154
Summary:
This change addresses two possible instances of user error / confusion when
merging sampled profile data.
Previously any input that didn't match the raw or processed instrumented format
would automatically be interpreted as instrumented profile text format data.
No error would be reported during the merge.
Example:
If foo-sampled.profdata and bar-sampled.profdata are binary sampled profiles:
Old behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -output foobar-sampled.profdata
$ llvm-profdata show -sample foobar-sampled.profdata
error: foobar-sampled.profdata:1: Expected 'mangled_name:NUM:NUM', found lprofi
This change adds basic checks for valid input data when assuming text input.
It also makes error messages related to file format validity more specific about
the assumbed profile data type.
New behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -o foobar-sampled.profdata
error: foo.profdata: Unrecognized instrumentation profile encoding format
Perhaps you forgot to use the -sample option?
Reviewers: bogner, davidxl, dnovillo
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14558
llvm-svn: 253009
Summary:
This change addresses two possible instances of user error / confusion when
merging sampled profile data.
Previously any input that didn't match the raw or processed instrumented format
would automatically be interpreted as instrumented profile text format data.
No error would be reported during the merge.
Example:
If foo-sampled.profdata and bar-sampled.profdata are binary sampled profiles:
Old behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -output foobar-sampled.profdata
$ llvm-profdata show -sample foobar-sampled.profdata
error: foobar-sampled.profdata:1: Expected 'mangled_name:NUM:NUM', found lprofi
This change adds basic checks for valid input data when assuming text input.
It also makes error messages related to file format validity more specific about
the assumbed profile data type.
New behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -o foobar-sampled.profdata
error: foo.profdata: Unrecognized instrumentation profile encoding format
Perhaps you forgot to use the -sample option?
Reviewers: bogner, davidxl, dnovillo
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14558
llvm-svn: 252916
In `MachOObjectFile::getSymbolType` we currently always return `SymbolRef::ST_Function` for symbols from any section. In order for llvm-symbolizer to correctly symbolize Mach-O globals, symbols from data and BSS sections should return `SymbolRef::ST_Data`.
Differential Revision: http://reviews.llvm.org/D14576
llvm-svn: 252867
Added "macro" option to "-debug-dump" flag, which trigger parsing and dumping of the ".debug_macinfo" section.
Differential Revision: http://reviews.llvm.org/D14294
llvm-svn: 252866
This is a follow-up from the previous discussion on the thread:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151019/307763.html
The LibLTO lto_get_error_message() API reads error messages from a std::string
sLastErrorString. Instead of passing this string around as an argument, this
patch creates a diagnostic handler and then sends this handler to the
constructor of LTOCodeGenerator.
Differential Revision: http://reviews.llvm.org/D14313
llvm-svn: 252791
already emitted and fix a latent bug in DIECloner where the DW_CHILDREN_yes
flag is set based on the number of children in the input DIE rather than
the number of children that are actually being cloned.
rdar://problem/23439845
llvm-svn: 252649
Summary:
This patch does a couple of things:
- Adds a new argument `--shared-mode` which accepts a list of components and prints whether or not the provided components need to be linked statically or shared.
- Fixes `--libnames` when CMake BUILD_SHARED_LIBS is used.
- Fixes `--libnames`, `--libs`, and `--libfiles` for dylib when static components aren't installed.
- Fixes `--libnames`, `--libs`, `--libfiles`, and `--components` to use LLVM_DYLIB_COMPONENTS as the component manifest for dylib linking.
- Uses the host platform's usual convention for filename extensions and such, instead of always defaulting to Unix-izms.
Because I don't own a Mac, I am not able to test the Mac platform dependent stuff locally. If someone would be willing to run a build for me on their machine (unless there's a better option), I'd appreciate it.
Reviewers: jfb, brad.king, whitequark, beanz
Subscribers: beanz, jauhien, llvm-commits
Differential Revision: http://reviews.llvm.org/D13198
llvm-svn: 252532
Some implicit ilist iterator conversions have crept back into Analysis,
Transforms, Hexagon, and llvm-stress. This removes them.
I'll commit a patch immediately after this to disallow them (in a
separate patch so that it's easy to revert if necessary).
llvm-svn: 252371
Summary:
We frequently run bugpoint on a linked module that consists of all
modules we create while jitting the julia standard library. This module
has a very large number of compile units (10000+) in `llvm.dbg.cu`,
which didn't get reduced at all, requiring manual post processing.
This is an attempt to have bugpoint go through and attempt to reduce
the number of global named metadata nodes as well as their operands,
to cut down the number of roots for such metadata.
Reviewers: dexonsmith, reames, pete
Subscribers: pete, dexonsmith, reames, llvm-commits
Differential Revision: http://reviews.llvm.org/D14043
llvm-svn: 252247
The needed lld matching changes to be submitted immediately next,
but this revision will cause lld failures with this alone which is expected.
This removes the eating of the error in Archive::Child::getSize() when the characters
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
These changes will require corresponding changes to the lld project. That will be
committed immediately after this change. But this revision will cause lld failures
with this alone which is expected.
llvm-svn: 252192
Summary:
This change makes the CMake build system generate libraries for Linux and Darwin matching the makefile build system.
Linux libraries follow the pattern lib${name}.${MAJOR}.${MINOR}.so so that ldconfig won't pick it up incorrectly.
Darwin libraries are not versioned.
Note: On linux the non-versioned symlink is generated at install-time not build time. I plan to fix that eventually, but I expect that is good enough for the purposes of fixing this bug.
Reviewers: loladiro, tstellarAMD
Subscribers: axw, llvm-commits
Differential Revision: http://reviews.llvm.org/D13841
llvm-svn: 252093
Summary:
This prints NO if LLVM was built with -fno-rtti or an equivalent flag
and YES otherwise. The reasons to add -has-rtti rather than adding -fno-rtti
to --cxxflags are:
1. Building LLVM with -fno-rtti does not always mean that client
applications need this flag.
2. Some compilers have a different flag for disabling rtti, and the
compiler being used to build LLVM may not be the compiler being used to
build the application.
Reviewers: echristo, chandlerc, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11849
llvm-svn: 252075
Introduce DIPrinter which takes care of rendering DILineInfo and
friends. This allows LLVMSymbolizer class to return a structured data
instead of plain std::strings.
llvm-svn: 251989
Bypassing LLVM for this has a number of benefits:
1) Laziness support becomes asm-syntax agnostic (previously lazy jitting didn't
work on Windows as the resolver block was in Darwin asm).
2) For cross-process JITs, it allows resolver blocks and trampolines to be
emitted directly in the target process, reducing cross process traffic.
3) It should be marginally faster.
llvm-svn: 251933
A new call I added to linkInModule from llvm-link in r251866
was still passing in a boolean for an argument that was changed to an
enum in r246561. I didn't catch this in my merge since the bool false
matched the flag value it mapped to.
llvm-svn: 251925
Which is needed if we want to replace darwin’s nm(1) with llvm-nm
as there are many uses of grouped flags. The added test case is
one specific case that is in real use.
rdar://23337419
llvm-svn: 251864
This reverts commit r251837, due to a number of bot failures of the form:
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to
'llvm::object::FunctionIndexObjectFile::create(llvm::MemoryBufferRef,
llvm::LLVMContext&, llvm::Module const*, bool)'
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to 'llvm::object::FunctionIndexObjectFile::takeIndex()'
I'm not sure why these are happening - I added Object to the requred
libraries in tools/llvm-link/LLVMBuild.txt and the LLVM_LINK_COMPONENTS
in tools/llvm-link/CMakeLists.txt. Confirmed for my build that these
symbols come out of libLLVMObject.a. What am I missing?
llvm-svn: 251841
Summary:
Support for necessary linkage changes and symbol renaming during
ThinLTO function importing.
Also includes llvm-link support for manually importing functions
and associated llvm-link based tests.
Note that this does not include support for intelligently importing
metadata, which is currently imported duplicate times. That support will
be in the follow-on patch, and currently is ignored by the tests.
Reviewers: dexonsmith, joker.eph, davidxl
Subscribers: tobiasvk, tejohnson, llvm-commits
Differential Revision: http://reviews.llvm.org/D13515
llvm-svn: 251837
1. Added a set of public interfaces in InstrProfRecord
class to access (read/write) value profile data.
2. Changed IndexedProfile reader and writer code to
use the newly defined interfaces and hide implementation
details.
3. Added a couple of unittests for value profiling:
- Test new interfaces to get and set value profile data
- Test value profile data merging with various scenarios.
No functional change is expected. The new interfaces will also
make it possible to change on-disk format of value prof data
to be more compact (to be submitted).
llvm-svn: 251771
While llvm-nm parses the -g option and has help that describes it as:
-extern-only - Show only external symbols
There is no code in the program to use the boolean valve it sets from the
command line.
rdar://23261095
llvm-svn: 251718
Introduce LLVMSymbolizer::symbolizeInlinedCode() instead of switching
on PrintInlining option passed to the constructor. This will be needed
once we retrun structured data (instead of std::string) from
LLVMSymbolizer and move printing logic out.
llvm-svn: 251675
These MachO file directives are used by linkers and other tools to provide
compatibility information, much like the existing .ios_version_min and
.macosx_version_min.
llvm-svn: 251569
For CloudABI's toolchain I have a symlink that goes from <target>-ar and
<target>-ranlib to LLVM's ar binary, to mimick GNU Binutils' naming
scheme. The problem is that if we're targetting ARM64, the name of the
ranlib executable is aarch64-unknown-cloudabi-ranlib. This already
contains the string "ar".
Let's move the "ranlib" test above the "ar" test. It's not that likely
that we're going to see operating systems or harwdare architectures that
are called "ranlib".
Reviewed by: rafael
Differential Revision: http://reviews.llvm.org/D14123
llvm-svn: 251413
Summary:
We've had a lot of discussion in the past about the meaningful and useful default behaviors for the llvm-shlib tool. The original implementation was heavily geared toward Apple's use, and I think that was wrong. This patch seeks to correct that.
I've removed the LLVM_DYLIB_EXPORT_ALL variable and made libLLVM export everything by default.
I've also added a new target that is only built on Darwin for libLLVM-C as a library that re-exports the LLVM-C API. This library is not built on Linux because ELF doesn't support re-export libraries in the same way MachO does.
Reviewers: chapuni, resistor, bogner, axw
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13842
llvm-svn: 251411
Processing bitcode from a different LLVM version can lead to
unexpected behavior. The LLVM project guarantees autoupdating
bitcode from a previous minor revision for the same major, but
can't make any promise when reading bitcode generated from a
either a non-released LLVM, a vendor toolchain, or a "future"
LLVM release. This patch aims at being more user-friendly and
allows a bitcode produce to emit an optional block at the
beginning of the bitcode that will contains an opaque string
intended to describe the bitcode producer information. The
bitcode reader will dump this information alongside any error it
reports.
The optional block also includes an "epoch" number, monotonically
increasing when incompatible changes are made to the bitcode. The
reader will reject bitcode whose epoch is different from the one
expected.
Differential Revision: http://reviews.llvm.org/D13666
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 251325
In this mode it just tries to tail merge the strings without imposing any other
format constrains. It will not, for example, add a null byte between them.
Also add support for keeping a tentative size and offset if we decide to
not optimize after all.
This will be used shortly in lld for merging SHF_STRINGS sections.
llvm-svn: 251153
This commit introduces an option, --preallocate, so that we can get memory
upfront and use it in small memory model tests (in order to get
reliable results).
Differential Revision: http://reviews.llvm.org/D13630
llvm-svn: 250956
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
Also corrected the code where the size gets us to the “at the end of the archive”
which is OK but past the end of the archive will return object_error::parse_failed now.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
llvm-svn: 250906
Previously, we only expanded function and filename column widths when
rendering file reports. This commit makes the change for function
reports as well.
llvm-svn: 250900
This reverts commit r250239.
It seems unwanted changes got committed here, and part of
the patch does not seem correct.
For instance RoundUpToAlignment() is called without its returned
value actually used.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 250882
memory, rather than representing the stubs in IR. Update the CompileOnDemand
layer to use this functionality.
Directly emitting stubs is much cheaper than building them in IR and codegen'ing
them (see below). It also plays well with remote JITing - stubs can be emitted
directly in the target process, rather than having to send them over the wire.
The downsides are:
(1) Care must be taken when resolving symbols, as stub symbols are held in a
separate symbol table. This is only a problem for layer writers and other
people using this API directly. The CompileOnDemand layer hides this detail.
(2) Aliases of function stubs can't be symbolic any more (since there's no
symbol definition in IR), but must be converted into a constant pointer
expression. This means that modules containing aliases of stubs cannot be
cached. In practice this is unlikely to be a problem: There's no benefit to
caching such a module anyway.
On balance I think the extra performance is more than worth the trade-offs: In a
simple stress test with 10000 dummy functions requiring stubs and a single
executed "hello world" main function, directly emitting stubs reduced user time
for JITing / executing by over 90% (1.5s for IR stubs vs 0.1s for direct
emission).
llvm-svn: 250712
Summary:
This patch adds support to llvm-lto that mirrors the support added by
r249270 to the gold plugin. This enables better testing of combined
index generation for ThinLTO.
Added a new test, and this support will be used in the test in D13515.
Reviewers: joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13847
llvm-svn: 250699
This avoids problems with different (u)intXX definition on different
platforms. Specifically this fixes a case on OS/X which had uint64_t
defined as unsigned long long.
llvm-svn: 250589
This lets us make guesses about symbols in third party DLLs without
debug info, like MSVCR120.dll or kernel32.dll. dbghelp does the same
thing.
llvm-svn: 250582
Summary:
Sometimes you want to install a custom compiler and use it like the system compiler without overriding the system compiler. This patch lets you create xctoolchains that the darwin command line tools can use.
To use this patch set LLVM_CREATE_XCODE_TOOLCHAIN=On in your CMake invocation and build the `install-code-toolchain` target.
After installation you can set the envar EXTERNAL_TOOLCHAINS_DIR to your installed Toolchains directory, and the TOOLCHAINS envar to the toolchain identifier (ex org.llvm.3.8.0svn). This will then cause /usr/bin/clang to call your newly installed clang.
Reviewers: Bigcheese, bogner
Subscribers: tobiasfar, llvm-commits
Differential Revision: http://reviews.llvm.org/D13605
llvm-svn: 250450
<windows.h> defines macros named min and max in conflict with
<algorithm>. Prevent macro expansion by wrapping std::min in
parenthesis.
llvm-svn: 250383
A PDB can be thought of as a very simple file system. It is
occasionally illuminating to see the contents of the underlying files.
Differential Revision: http://reviews.llvm.org/D13674
llvm-svn: 250356
TrivialMemoryManager currently doesn't check the return type of AllocateRWX --
and returns a 'null' MemoryBlock to its caller. As pointed out by Lang,
this exposes some serious issues with the MemoryManager interface. There's,
in fact, no way to report back an error to clients rather than aborting in
case memory can't be allocated. Eventually the interface will grow to support
this, but for now, fail sooner rather than later.
Differential Revision: http://reviews.llvm.org/D13627
llvm-svn: 250350
We now use clang by default and fallback to gcc when requested.
With this commit, names reflect reality. No functional change
intended.
Discussed with: Rafael Espindola.
llvm-svn: 250321
We now rely on gcc only if either of the following is true:
1) -gcc option is passed by the user
2) clang is not found in the default path.
Differential Revision: http://reviews.llvm.org/D13642
llvm-svn: 250318
Add a new command line switch, -gnu-hash-table, to print the content of that section.
Differential Revision: http://reviews.llvm.org/D13696
llvm-svn: 250291
malformed Mach-O file that caused a crash. This was because of an
assert where the code was incorrectly attempting to parse relocation
entries off of the sections and the filetype was not an MH_OBJECT.
rdar://22983603
llvm-svn: 249921
from malformed Mach-O files that caused crashes. The first because the
offset in a dyld bind table entry was out of range. The second because their
was no image info section and the routine printing it did not have the
need check to see the section did not exist.
rdar://22983603
llvm-svn: 249845
Summary:
Previously the relative address flag only affected PDB debug info. Now
both DIContext implementations always expect to be passed virtual
addresses. llvm-symbolizer is now responsible for adding ImageBase to
module offsets when --relative-offset is passed.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12883
llvm-svn: 249784
from malformed Mach-O files that caused a crash because of a
section header had a size that extended past the end of the file.
rdar://22983603
llvm-svn: 249768
Even if we don't have it in PATH, lipo should usually exist in the same directory
as dsymutil. Keep the fallback looking up the PATH, it's very useful when
testing a non-installed executable.
llvm-svn: 249762
This fixes memory allocation problems by making the merge operation keep
the profile readers around until the merged profile has been emitted.
This is needed to prevent the inlined function names to disappear from
the function profiles. Since all the names are kept as references, once
the reader disappears, the names are also deallocated.
Additionally, XFAIL on big-endian architectures. The test case uses a
gcov file generated on a little-endian system.
llvm-svn: 249724
Summary:
Adds support for automatically detecting and printing strings
represented by Array abbrev operands, analogous to the string dumping
performed for Blob abbrev operands.
Enhanced the ThinLTO combined index test to check for the appropriate
module and function strings.
Reviewers: dexonsmith, joker.eph, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13553
llvm-svn: 249695
llvm-nm only needs the target to parse module level assembly in bitcode. It doesn't need a disassembler or codegen.
llvm-objdump needs to be able to disassemble a file, but doesn't need asm parsers or codegen.
This reduces the sizes of these tools by a few MB each, depending on how many backends are linked in.
llvm-svn: 249632
Previously the CompileOnDemand layer always created single-function partitions.
In theory this new API allows for more interesting partitions, though this has
not been well tested yet.
llvm-svn: 249623
from malformed Mach-O files that caused crashes.
We recently got about 700 malformed Mach-O files which we have
been using the improve the robustness of tools that deal with reading
data from object files. These resulted in about 20 small bug fixes to
the darwin based tools.
The goal here is to also improve the robustness of llvm-objdump and
this is the first two fixes. In talking with Tim Northover the approach
we thought might be best is to:
1) Only include tests for the malformed Mach-O files that cause crashes
(not all 700+ tests).
2) The test should only contain the command line option that caused the
crash and not all the others that don’t matter.
3) There should be only one line for the FileCheck that is past the point
of the crash if possible and if possible indicates the malformation.
Again the goal is to fix crashes and not so much care about how the
printing of malformed data comes out.
Tim also suggested if we really wanted to add test cases for all 700+
malformed Mach-O files putting them in the regression tests might be
an option. But many of these do not cause crashes.
llvm-svn: 249479
if there exists not definition for the type.
For this to work, we need to clone the imported modules before building
the decl context chains of the DIEs in the non-skeleton CUs.
llvm-svn: 249362
Summary:
The bitcode format is described in this document:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
For more info on ThinLTO see:
https://sites.google.com/site/llvmthinlto
The first customer is ThinLTO, however the data structures are designed
and named more generally based on prior feedback. There are a few
comments regarding how certain interfaces are used by ThinLTO, and the
options added here to gold currently have ThinLTO-specific names as the
behavior they provoke is currently ThinLTO-specific.
This patch includes support for generating per-module function indexes,
the combined index file via the gold plugin, and several tests
(more are included with the associated clang patch D11908).
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13107
llvm-svn: 249270
AArch64 uses $d* and $x* to interleave between text and data.
llvm-objdump didn't know about this so it ended up printing garbage.
This patch is a first step towards a solution of the problem.
Differential Revision: http://reviews.llvm.org/D13360
llvm-svn: 249083
Add support to the indexed instrprof reader and writer for the format
that will be used for value profiling.
Patch by Betul Buyukkurt, with minor modifications.
llvm-svn: 248833
PDB files have a lot of noise in them, with hundreds (or thousands)
of symbols from system libraries and compiler generated types. If
you're only looking for a specific type, this can be problematic.
This CL allows you to display *only* types, variables, or compilands
matching a particular pattern. These filters can even be combined
with exclude filters. Include-only filters are given priority, so
that first the set of items to display is limited only to those that
match the include filters, and then the set of exclude filters is
applied to those. If there are no include filters specified, then
it means "display everything".
llvm-svn: 248822
The fuzzer argument parser will ignore all options starting with '--' so
operation mode options should begin with '--' and fuzzer options should begin
with '-'. Fuzzer arguments must still follow --fuzzer-args so that they escape
the parsing performed by the CommandLine library.
llvm-svn: 248671
This patch extends llvm-dsymutil's ODR type uniquing machinery to also
resolve forward decls for types defined in clang modules.
http://reviews.llvm.org/D13038
llvm-svn: 248398
Summary:
For fixed length instructions, we can use -max_len to limit the fuzzer to a
single instruction. This doesn't work for variable length instruction sets
since a 4-byte input could consist of one 4-byte instruction or two 2-byte
instructions.
This patch adds a --insn-limit to llvm-mc-fuzzer to limit the input in
terms of instructions processed.
Reviewers: kcc
Subscribers: kcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D12960
llvm-svn: 248253
This reverts commit r247898 (which reverted r247894).
Patch fixed to address two issues exposed by buildbots:
- unused variable warning in NDEBUG mode
- std::initializer_list lifetime issue causing test failures
Original Summary:
Support for including the function bitcode indices in the Value Symbol
Table. This requires writing the VST after the function blocks, which in
turn requires a new VST forward declaration record encoding the offset of
the full VST (which is backpatched to contain the offset after the VST
is written).
This patch also enables the lazy function reader to use the new function
indices out of the VST. This support will be used by ThinLTO as well, which
will be in a follow on patch. Backwards compatibility with older bitcode
files is maintained.
A new test is also included.
The bitcode format (used for the lazy reader as well as the upcoming
ThinLTO patches) came out of discussions with Duncan and others and is
described here:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12536
llvm-svn: 247927
Temporarily revert to fix some buildbot issues. One is a minor issue
with a variable unused in NDEBUG mode. More concerning are some test
failures on win7 that I need to dig into.
This reverts commit 4e66a74543459832cfd571db42b4543580ae1d1d.
llvm-svn: 247898
Summary:
Support for including the function bitcode indices in the Value Symbol
Table. This requires writing the VST after the function blocks, which in
turn requires a new VST forward declaration record encoding the offset of
the full VST (which is backpatched to contain the offset after the VST
is written).
This patch also enables the lazy function reader to use the new function
indices out of the VST. This support will be used by ThinLTO as well, which
will be in a follow on patch. Backwards compatibility with older bitcode
files is maintained.
A new test is also included.
The bitcode format (used for the lazy reader as well as the upcoming
ThinLTO patches) came out of discussions with Duncan and others and is
described here:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12536
llvm-svn: 247894
Summary:
Only the disassembler is supported in this patch but it has already found a few
issues in the Mips disassembler (mostly invalid instructions being successfully
disassembled).
Reviewers: kcc
Subscribers: russell.gallop, silvas, kcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D12723
llvm-svn: 247786
We already fail with 'No such file or directory' when we try to open
the file -- if that doesn't exist. Also add a test to verify this behavior.
llvm-svn: 247744
The verifier currently runs three times in LTO: (1) after parsing, (2)
at the beginning of the optimization pipeline, and (3) at the end of it.
The first run is important, since we're not sure where the bitcode comes
from and it's nice to validate it, but in release builds the extra runs
aren't appropriate.
This commit:
- Allows these runs to be disabled in LTOCodeGenerator.
- Adds command-line options to llvm-lto.
- Adds command-line options to libLTO.dylib, and disables the verifier
by default in release builds (based on NDEBUG).
This shaves about 3.5% off the runtime of ld64 when linking
verify-uselistorder with -flto -g.
rdar://22509081
llvm-svn: 247729
Davide Italiano