As it turns out, whether we zero-extend or sign-extend i8/i16 constants, which
are illegal types promoted to i32 on PowerPC, is a choice constrained by
assumptions within the infrastructure. Specifically, the logic in
FunctionLoweringInfo::ComputePHILiveOutRegInfo assumes that constant PHI
operands will be zero extended, and so, at least when materializing constants
that are PHI operands, we must do the same.
The rest of our fast-isel implementation does not appear to depend on the fact
that we were sign-extending i8/i16 constants, and all other targets also appear
to zero-extend small-bitwidth constants in fast-isel; we'll now do the same (we
had been doing this only for i1 constants, and sign-extending the others).
Fixes PR27721.
llvm-svn: 280614
Summary:
The inliner may need to determine where a given funclet unwinds to,
and this determination may depend on other funclets throughout the
funclet tree. The code that performs this walk in getUnwindDestToken
memoizes results to avoid redundant computations. In the case that
a funclet's unwind destination is derived from its ancestor, there's
code to walk back down the tree from the ancestor updating the memo
map of its descendants to record the unwind destination. This change
fixes that code to account for the case that some descendant has a
different unwind destination, which can happen if that unwind dest
is a descendant of the EHPad being queried and thus didn't determine
its unwind destination.
Also update test inline-funclets.ll, which is supposed to cover such
scenarios, to include a case that fails an assertion without this fix
but passes with it.
Fixes PR29151.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24117
llvm-svn: 280610
CGP currently drops select's MD_prof profile data when
generating conditional branch which can lead to bad
code layout. The patch fixes the issue.
Differential Revision: http://reviews.llvm.org/D24169
llvm-svn: 280600
Because the recent change about ODR type uniquing in the context,
we can reach types defined in another module during IR linking.
This triggered some assertions in case we IR link without starting
from an empty module. To alleviate that, we can self-map metadata
defined in the destination module so that they won't be visited.
Differential Revision: https://reviews.llvm.org/D23841
llvm-svn: 280599
I'm not sure if this should be considered a bug in
copyImplicitOps or not, but implicit operands that are part
of the static instruction definition should not be copied.
llvm-svn: 280594
Summary:
This contains two changes that reduce the time spent in WQM, with the
intention of reducing bandwidth required by VMEM loads:
1. Sampling instructions by themselves don't need to run in WQM, only their
coordinate inputs need it (unless of course there is a dependent sampling
instruction). The initial scanInstructions step is modified accordingly.
2. When switching back from WQM to Exact, switch back as soon as possible.
This affects the logic in processBlock.
This should always be a win or at best neutral.
There are also some cleanups (e.g. remove unused ExecExports) and some new
debugging output.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D22092
llvm-svn: 280590
Summary:
This fixes a rare bug in polygon stippling with non-monolithic pixel shaders.
The underlying problem is as follows: the prolog part contains the polygon
stippling sequence, i.e. a kill. The main part then enables WQM based on the
_reduced_ exec mask, effectively undoing most of the polygon stippling.
Since we cannot know whether polygon stippling will be used, the main part
of a non-monolithic shader must always return to exact mode to fix this
problem.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23131
llvm-svn: 280589
readlane/writelane do not support using m0 as the output/input.
Constrain the register class of spill vregs to try to avoid this,
but also handle spilling of the physreg when necessary by inserting
an additional copy to a normal SGPR.
llvm-svn: 280584
The only intrusive thing about SparseBitVector's usage of ilist<> was
that new was usually called externally. There were no custom traits.
It seems like the reason to switch to ilist in r41855 was to avoid
pointer invalidation, but std::list<> has that feature too. Maybe
std::list<>::emplace makes this a little more obvious than it was then.
Switch over to std::list<> and simplify the code.
llvm-svn: 280573
PowerPC assembly code in the wild, so it seems, has things like this:
bc+ 12, 28, .L9
This is a bit odd because the '+' here becomes part of the BO field, and the BO
field is otherwise the first operand. Nevertheless, the ISA specification does
clearly say that the +- hint syntax applies to all conditional-branch mnemonics
(that test either CTR or a condition register, although not the forms which
check both), both basic and extended, so this is supposed to be valid.
This introduces some asm-parser-only definitions which take only the upper
three bits from the specified BO value, and the lower two bits are implied by
the +- suffix (via some associated aliases).
Fixes PR23646.
llvm-svn: 280571
Inheriting from std::iterator uses more boiler-plate than manual
typedefs. Avoid that in both ilist_iterator and
MachineInstrBundleIterator.
This has the side effect of removing ilist_iterator from certain ADL
lookups in namespace std; calls to std::next need to be qualified by
"std::" that didn't have to before. The one case of this in-tree was
operating on a temporary, so I used the more compact operator++.
llvm-svn: 280570
Split out iplist_impl from iplist, and change SymbolTableList to inherit
directly from iplist_impl. This makes it more straightforward to add
new template paramaters to iplist [*]:
- iplist_impl takes a "base" list that provides the intrusive
functionality (usually simple_ilist<T>) and a traits class.
- iplist no longer takes a "Traits" template parameter. It only takes
the value_type, T, and instantiates iplist_impl with simple_ilist<T>
and ilist_traits<T>.
- SymbolTableList now inherits from iplist_impl, instead of iplist.
Note for out-of-tree code: if you have an iplist whose second template
parameter was *not* the default (i.e., not ilist_traits<YourT>), you
have three options:
- Stop using a custom traits class, and instead specialize
ilist_traits<YourT>. This is the usual thing to do.
- Specialize iplist<YourT> to pass your custom traits class into
iplist_impl.
- Create your own trivial list type that passes your custom traits class
into iplist_impl (see SymbolTableList<> for an example).
[*]: The eventual goal is to start tracking a sentinel bit on the
MachineInstr list even when LLVM_ENABLE_ABI_BREAKING_CHECKS is off,
which will enable MachineBasicBlock::reverse_iterator to have normal
list invalidation semantics that matching the new
iplist<>::reverse_iterator from r280032.
llvm-svn: 280569
Delete the dead code for Write(ilist_iterator) in the IR Verifier,
inline report(ilist_iterator) at its call sites in the MachineVerifier,
and use simple_ilist<>::iterator in SymbolTableListTraits.
The only remaining reference to ilist_iterator outside of the ilist
implementation is from MachineInstrBundleIterator. I'll get rid of that
in a follow-up.
llvm-svn: 280565
This test was using the wrong type, and so not actually testing much.
ilist_iterator constructors weren't going through ilist_node_access, so
they didn't actually work with private inheritance.
llvm-svn: 280564
dcbf has an optional hint-like field, add support for the extended form and the
associated mnemonics (dcbfl and dcbflp).
Partially fixes PR24796.
llvm-svn: 280559
1. 0xNN and NNh are accepted as valid hexadecimal numbers, but 0xNNh is not.
0xNN and NNh may come with optional U or L suffix.
2. NNb is accepted as a valid binary (base-2) number, but 0bNN is not.
NNb may come with optional U or L suffix.
Differential Revision: https://reviews.llvm.org/D22112
llvm-svn: 280555
Summary: VS code creates .vscode folder to keep its stuff that we really don't need in git.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24211
llvm-svn: 280551
Summary:
This is a follow up to r280455, where a check for the process exit code
was introduced. Some ASAN bots throw this error now, but it's impossible
to understand what's wrong with them, and the issue is not reproducible.
Reviewers: vitalybuka
Differential Revision: https://reviews.llvm.org/D24210
llvm-svn: 280550
Before we were kind of imitating the behavior of a Yaml sequence
by outputting each record one after the other. This makes it a
little cumbersome when we want to go the other direction -- from
Yaml to Pdb. So this treats FieldList records as no different than
any other list of records, by printing them as a Yaml sequence with
the exact same format.
llvm-svn: 280549
When we have an offset into a global, etc. that is accessed relative to the TOC
base pointer, and the offset is larger than the minimum alignment of the global
itself and the TOC base pointer (which is 8-byte aligned), we can still fold
the @toc@ha into the memory access, but we must update the addis instruction's
symbol reference with the offset as the symbol addend. When there is only one
use of the addi to be folded and only one use of the addis that would need its
symbol's offset adjusted, then we can make the adjustment and fold the @toc@l
into the memory access.
llvm-svn: 280545
Recently, llvm wants to emit calls to these functions, while it didn't
seem to be an issue before. Not sure why. Nor do I know why only these
three are important to disable, out of all of the i128 libcalls.
Nevertheless, many other targets have this snippet of code, so, just
copying it to sparc as well, to unbreak things.
llvm-svn: 280537
Subregister definitions are considered uses for the purpose of tracking
liveness of the whole register. At the same time, when calculating live
interval subranges, subregister defs should not be treated as uses.
Differential Revision: https://reviews.llvm.org/D24190
llvm-svn: 280532
Previously we were splitting our records at 0xFFFF bytes, which the
Microsoft tools don't like.
Should fix failure on the new Windows self-host buildbot.
This length appears in microsoft-pdb/PDB/dbi/dbiimpl.h
llvm-svn: 280522
One side of a diamond may end with a predicate clobbering instruction.
That side of the diamond has to be if-converted second. Both sides can't
clobber the predicate or the ifconversion is invalid. This is checked
elsewhere, but add an assert as a safety check. NFC
llvm-svn: 280518
For the store of a wide value merged from a pair of values, especially int-fp pair,
sometimes it is more efficent to split it into separate narrow stores, which can
remove the bitwise instructions or sink them to colder places.
Now the feature is only enabled on x86 target, and only store of int-fp pair is
splitted. It is possible that the application scope gets extended with perf evidence
support in the future.
Differential Revision: https://reviews.llvm.org/D22840
llvm-svn: 280505
The motivating case occurs with SSE/AVX scalar intrinsics, so this is a first step towards
shrinking that to a single shufflevector.
Note that the transform is intentionally limited to shuffles that are equivalent to vector
selects to avoid creating arbitrary shuffle masks that may not lower well.
This should solve PR29126:
https://llvm.org/bugs/show_bug.cgi?id=29126
Differential Revision: https://reviews.llvm.org/D23886
llvm-svn: 280504
Do this by creating a temp directory in the normal system temp
directory, and cleaning it up on exit.
It is still possible for this temp directory to leak if Python exits
abnormally, but this is probably good enough for now.
Fixes PR18335
llvm-svn: 280501
For uniform instructions, we're only required to generate a scalar value for
the first vector lane of each unroll iteration. Thus, if we have a reverse
interleaved group, computing the member index off the scalar GEP corresponding
to the last vector lane of its pointer operand technically makes the GEP
non-uniform. We should compute the member index off the first scalar GEP
instead.
I've added the updated member index computation to the existing reverse
interleaved group test.
llvm-svn: 280497
We don't need to call `GetCompareTy(LHS)' every single time true or false is
returned from function SimplifyFCmpInst as suggested by Sanjay in review D24142.
llvm-svn: 280491
This patch fixes a crash caused by an incorrect folding of an ordered comparison
between a packed floating point vector and a splat vector of NaN.
An ordered comparison between a vector and a constant vector of NaN, should
always be folded into a constant vector where each element is i1 false.
Since revision 266175, SimplifyFCmpInst folds the ordered fcmp into a scalar
'false'. Later on, this would cause an assertion failure, since the value type
of the folded value doesn't match the expected value type of the uses of the
original instruction: "Assertion failed: New->getType() == getType() &&
"replaceAllUses of value with new value of different type!".
This patch fixes the issue and adds a test case to the already existing test
InstSimplify/floating-point-compares.ll.
Differential Revision: https://reviews.llvm.org/D24143
llvm-svn: 280488
This fixes a regression introduced by revision 268094.
Revision 268094 added the following dag combine rule:
// trunc (shl x, K) -> shl (trunc x), K => K < vt.size / 2
That rule converts a truncate of a shift-by-constant into a shift of a truncated
value. We do this only if the shift count is less than half the size in bits of
the truncated value (K < vt.size / 2).
The problem is that the constraint on the shift count is incorrect, so the rule
doesn't work well in some cases involving vector types. The combine rule should
have been written instead like this:
// trunc (shl x, K) -> shl (trunc x), K => K < vt.getScalarSizeInBits()
Basically, if K is smaller than the "scalar size in bits" of the truncated value
then we know that by "sinking" the truncate into the operand of the shift we
would never accidentally make the shift undefined.
This patch fixes the check on the shift count, and adds test cases to make sure
that we don't regress the behavior.
Differential Revision: https://reviews.llvm.org/D24154
llvm-svn: 280482
constructor when trying to do copy construction by adding an explicit
move constructor.
Will watch the bots to discover if this is sufficient.
llvm-svn: 280479
Crash was possible if match() method
was called on object that was moved or object
created with empty constructor.
Testcases updated.
DIfferential revision: https://reviews.llvm.org/D24123
llvm-svn: 280473
We're sinking stores, which is a good thing, but in the process creating selects for the store address operand, which SROA/Mem2Reg can't look through, which caused serious regressions.
The real fix is in SROA, which I'll be looking into.
llvm-svn: 280470
As Sanjay suggested when he added the hook, PPC should return true from
hasAndNotCompare. We have an efficient negated 'and' on PPC (which can feed a
compare).
Fixes PR27203.
llvm-svn: 280457
googletest formatted tests are discovered by running the test executable.
Previously testing would silently succeed if the test executable crashed
during the discovery process. Now testing fails with "error: unable to
discover google-tests ..." if the test executable exits with a non-zero status.
llvm-svn: 280455
Following a suggestion by Sanjay, we should lower:
%shl = shl i32 1, %y
%and = and i32 %x, %shl
%cmp = icmp eq i32 %and, %shl
ret i1 %cmp
into:
subfic r4, r4, 32
rlwnm r3, r3, r4, 31, 31
Add this pattern and some associated patterns for the 64-bit case and the
not-equal case. Fixes PR27356.
llvm-svn: 280454
r280425 | dehao | 2016-09-01 16:15:50 -0700 (Thu, 01 Sep 2016) | 9 lines
Refactor LICM pass in preparation for LoopSink pass.
Summary: LoopSink pass uses some common function in LICM. This patch refactor the LICM code to make it usable by LoopSink pass (https://reviews.llvm.org/D22778).
r280429 | dehao | 2016-09-01 16:31:25 -0700 (Thu, 01 Sep 2016) | 9 lines
Refactor LICM to expose canSinkOrHoistInst to LoopSink pass.
Summary: LoopSink pass shares the same canSinkOrHoistInst functionality with LICM pass. This patch exposes this function in preparation of https://reviews.llvm.org/D22778
llvm-svn: 280453
If the entire blocks match, we would count the branch instructions
toward the number of duplicated instructions. This doesn't match what we
do elsewhere, and was causing a bug.
llvm-svn: 280448
This wasn't really well explicitly tested with a nice unittest before.
It seems good to have reasonably broken out unittests for this kind of
functionality as I'm workin go other invalidation features to make sure
none of the existing ones regress.
This still has too much duplicated code, I plan to factor that out in
a subsequent commit to use common helpers for repeated parts of this.
llvm-svn: 280447
If we failed to commit the buffer but did not die to a signal, the temp
file would remain on disk on Windows. Having an open file mapping and
file handle prevents the file from being deleted. I am choosing not to
add an assertion of success on the temp file removal, since virus
scanners and other environmental things can often cause removal to fail
in real world tools.
Also fix more temp file leaks in unit tests.
llvm-svn: 280445
passes.
This simplifies the test some and makes it more focused and clear what
is being tested. It will also make it much easier to extend with further
testing of different pass behaviors.
I've also replaced a pointless module pass with running the requires
pass directly as that is all that it was really doing.
llvm-svn: 280444
Summary:
This is pretty useful especially in connection with
BFI's -view-block-freq-propagation-dags. It helped me to track down the
bug that is being fixed in D24118.
While -view-block-freq-propagation-dags displays the high-level
information with static heuristics included (and block frequencies), the
new thing only shows the raw weight as presented by PGO without any of
the static estimates. This helps to distinguished what has been
measured vs. estimated.
For the sample loop in D24118, -view-block-freq-propagation-dags=integer
looks like this:
https://reviews.llvm.org/F2381352
While with -view-cfg-only you can see the underlying branch weights:
https://reviews.llvm.org/F2392296
Reviewers: dexonsmith, bogner, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24144
llvm-svn: 280442
When applying our address-formation PPC64 peephole, we are reusing the @ha TOC
addis value with the low parts associated with different offsets (i.e.
different effective symbol addends). We were assuming this was okay so long as
the offsets were less than the alignment of the global variable being accessed.
This ignored the fact, however, that the TOC base pointer itself need only be
8-byte aligned. As a result, what we were doing is legal only for offsets less
than 8 regardless of the alignment of the object being accessed.
Fixes PR28727.
llvm-svn: 280441
The logic in this function assumes that the P8 supports fusion of addis/addi,
but it does not. As a result, there is no advantage to restricting our peephole
application, merging addi instructions into dependent memory accesses, even
when the addi has multiple users, regardless of whether or not we're optimizing
for size.
We might need something like this again for the P9; I suspect we'll revisit
this code when we work on P9 tuning.
llvm-svn: 280440
Summary: LoopSink pass shares the same canSinkOrHoistInst functionality with LICM pass. This patch exposes this function in preparation of https://reviews.llvm.org/D22778
Reviewers: chandlerc, davidxl, danielcdh
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24171
llvm-svn: 280429
Summary: This is in preparation for LoopSink pass which calls replaceDominatedUsesWith to update after sinking.
Reviewers: chandlerc, davidxl, danielcdh
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24170
llvm-svn: 280427
Summary: LoopSink pass uses some common function in LICM. This patch refactor the LICM code to make it usable by LoopSink pass (https://reviews.llvm.org/D22778).
Reviewers: chandlerc, davidxl, danielcdh
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24168
llvm-svn: 280425
When expanding a SETCC for which the low half is known to evaluate to false,
we can only throw it away for LT/GT comparisons, not LE/GE.
This fixes PR29170.
Differential Revision: https://reviews.llvm.org/D24151
llvm-svn: 280424
auto-brief format for doxygen comments. Most notable is switching to
that in the example doxygen comment. I've also tweaked the wording but
am happy to tweak it further if others have suggestions here.
Mostly doing this to capture something I and others have been writing
consistently and repeatedly in code reviews.
llvm-svn: 280419
Prior to this, we could generate a vector_shuffle from an IR shuffle when the
size of the result was exactly the sum of the sizes of the input vectors.
If the output vector was narrower - e.g. a <12 x i8> being formed by a shuffle
with two <8 x i8> inputs - we would lower the shuffle to a sequence of extracts
and inserts.
Instead, we can form a larger vector_shuffle, and then extract a subvector
of the right size - e.g. shuffle the two <8 x i8> inputs into a <16 x i8>
and then extract a <12 x i8>.
This also includes a target-specific X86 combine that in the presence of
AVX2 combines:
(vector_shuffle <mask> (concat_vectors t1, undef)
(concat_vectors t2, undef))
into:
(vector_shuffle <mask> (concat_vectors t1, t2), undef)
in cases where this allows us to form VPERMD/VPERMQ.
(This is not a separate commit, as that pattern does not appear without
the DAGBuilder change.)
llvm-svn: 280418
Summary: This patch adds asm.js-style setjmp/longjmp handling support for WebAssembly. It also uses JavaScript's try and catch mechanism.
Reviewers: jpp, dschuff
Subscribers: jfb, dschuff
Differential Revision: https://reviews.llvm.org/D24121
llvm-svn: 280415
They're another source of generic vregs, which are going to need a type on the
definition when we remove the register width from MachineRegisterInfo.
llvm-svn: 280412
With that change, images built with 'lld-link /debug' always have a
debug directory. If no PDB filename was passed on the command line, then
the filename in the executable is empty.
PDB information would never work anyway if the PDB file name is empty,
so go ahead and try DWARF in that case.
llvm-svn: 280410
We can now maintain scalar values in VectorLoopValueMap. Thus, we no longer
have to create temporary vectors with insertelement instructions when handling
pointer induction variables. This case was mistakenly missed from r279649 when
refactoring the other scalarization code.
llvm-svn: 280405
According to spec cvtdq2pd and cvtps2pd instructions don't require memory operand to be aligned
to 16 bytes. This patch removes this requirement from the memory folding table.
Differential Revision: https://reviews.llvm.org/D23919
llvm-svn: 280402
Add runtime metdata for pointee alignment of pointer type kernel argument. The key is KeyArgPointeeAlign and the value is a 32 bit unsigned integer.
Differential Revision: https://reviews.llvm.org/D24145
llvm-svn: 280399
My previous attempt at this connected the sub-project check targets to the test-depends target instead of to the check-all target. That resulted in the tests running multiple times on bots that built "test-depends" and "check-all" in separate build invocations.
llvm-svn: 280392
This patch moves the allocation of VectorParts for PHI nodes into the actual
PHI widening code. Previously, we allocated these VectorParts in
vectorizeBlockInLoop, and passed them by reference to widenPHIInstruction. Upon
returning, we would then map the VectorParts in VectorLoopValueMap. This
behavior is problematic for the cases where we only want to generate a scalar
version of a PHI node. For example, if in the future we only generate a scalar
version of an induction variable, we would end up inserting an empty vector
entry into the map once we return to vectorizeBlockInLoop. We now no longer
need to pass VectorParts to the various PHI widening functions, and we can keep
VectorParts allocation as close as possible to the point at which they are
actually mapped in VectorLoopValueMap.
llvm-svn: 280390
Legalization tends to create anyext(trunc) patterns. This should always be
combined - into either a single trunc, a single ext, or nothing if the
types match exactly. But if we happen to combine the trunc first, we may pull
the trunc away from the anyext or make it implicit (e.g. the truncate(extract)
-> extract(bitcast) fold).
To prevent this, we can avoid doing the fold, similarly to how we already handle
fpround(fpextend).
Differential Revision: https://reviews.llvm.org/D23893
llvm-svn: 280386
Summary:
Created a new td file MIMGInstructions.td which contains all definitions
of MIMG related instructions.
Reviewed by:
kzhuravl, vpykhtin
Differential Revision:
http://reviews.llvm.org/D24106
llvm-svn: 280385
Apparently nobody evaluated multiprocessing on Windows since Daniel
enabled multiprocessing on Unix in r193279. It works so far as I can
tell.
Today this is worth about an 8x speedup (631.29s to 73.25s) on my 24
core Windows machine. Hopefully this will improve Windows buildbot cycle
time, where currently it takes more time to run check-all than it does
to self-host with assertions enabled:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/builds/20
build stage 2 ninja all ( 28 mins, 22 secs )
ninja check 2 stage 2 ( 37 mins, 38 secs )
llvm-svn: 280382
This is a partial revert of r280013. Brad King pointed out these variable names are matching CMake conventions, so we should preserve them.
I've also added a direct mapping of the LLVM_*_DIR variables which we need to make projects support building in and out of tree.
llvm-svn: 280380
Previous change broke the C API for creating an EarlyCSE pass w/
MemorySSA by adding a bool parameter to control whether MemorySSA was
used or not. This broke the OCaml bindings. Instead, change the old C
API entry point back and add a new one to request an EarlyCSE pass with
MemorySSA.
llvm-svn: 280379
This scheduler describes a processor which covers all MIPS ISAs based
around the interAptiv and P5600 timings.
Reviewers: vkalintiris, dsanders
Differential Revision: https://reviews.llvm.org/D23551
llvm-svn: 280374
While removing a scalar shackle from an icmp fold, I noticed that I couldn't find any tests to trigger
this code path.
The 'and' shrinking transform should be handled by InstCombiner::foldCastedBitwiseLogic()
or eliminated with InstSimplify. The icmp narrowing is part of InstCombiner::foldICmpWithCastAndCast().
Differential Revision: https://reviews.llvm.org/D24031
llvm-svn: 280370
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280364
If an attribute name has special characters such as '\01', it is not
properly printed in LLVM assembly language format. Since the format
expects the special characters are printed as it is, it has to contain
escape characters to make it printable.
Before:
attributes #0 = { ... "counting-function"="^A__gnu_mcount_nc" ...
After:
attributes #0 = { ... "counting-function"="\01__gnu_mcount_nc" ...
Reviewers: hfinkel, rengolin, rjmccall, compnerd
Subscribers: nemanjai, mcrosier, hans, shenhan, majnemer, llvm-commits
Differential Revision: https://reviews.llvm.org/D23792
llvm-svn: 280357
r279460 rewrote this function to be able to handle more than two incoming edges and took pains to ensure this didn't regress anything.
This time we change the logic for determining if an instruction should be sunk. Previously we used a single pass greedy algorithm - sink instructions until one requires more than one PHI node or we run out of instructions to sink.
This had the problem that sinking instructions that had non-identical but trivially the same operands needed extra logic so we sunk them aggressively. For example:
%a = load i32* %b %d = load i32* %b
%c = gep i32* %a, i32 0 %e = gep i32* %d, i32 1
Sinking %c and %e would naively require two PHI merges as %a != %d. But the loads are obviously equivalent (and maybe can't be hoisted because there is no common predecessor).
This is why we implemented the fairly complex function areValuesTriviallySame(), to look through trivial differences like this. However it's just not clever enough.
Instead, throw areValuesTriviallySame away, use pointer equality to check equivalence of operands and switch to a two-stage algorithm.
In the "scan" stage, we look at every sinkable instruction in isolation from end of block to front. If it's sinkable, we keep track of all operands that required PHI merging.
In the "sink" stage, we iteratively sink the last non-terminator in the source blocks. But when calculating how many PHIs are actually required to be inserted (to work out if we should stop or not) we remove any values that have already been sunk from the set of PHI-merges required, which allows us to be more aggressive.
This turns an algorithm with potentially recursive lookahead (looking through GEPs, casts, loads and any other instruction potentially not CSE'd) to two linear scans.
llvm-svn: 280351
LLVM has an @llvm.eh.dwarf.cfa intrinsic, used to lower the GCC-compatible
__builtin_dwarf_cfa() builtin. As pointed out in PR26761, this is currently
broken on PowerPC (and likely on ARM as well). Currently, @llvm.eh.dwarf.cfa is
lowered using:
ADD(FRAMEADDR, FRAME_TO_ARGS_OFFSET)
where FRAME_TO_ARGS_OFFSET defaults to the constant zero. On x86,
FRAME_TO_ARGS_OFFSET is lowered to 2*SlotSize. This setup, however, does not
work for PowerPC. Because of the way that the stack layout works, the canonical
frame address is not exactly (FRAMEADDR + FRAME_TO_ARGS_OFFSET) on PowerPC
(there is a lower save-area offset as well), so it is not just a matter of
implementing FRAME_TO_ARGS_OFFSET for PowerPC (unless we redefine its
semantics -- We can do that, since it is currently used only for
@llvm.eh.dwarf.cfa lowering, but the better to directly lower the CFA construct
itself (since it can be easily represented as a fixed-offset FrameIndex)). Mips
currently does this, but by using a custom lowering for ADD that specifically
recognizes the (FRAMEADDR, FRAME_TO_ARGS_OFFSET) pattern.
This change introduces a ISD::EH_DWARF_CFA node, which by default expands using
the existing logic, but can be directly lowered by the target. Mips is updated
to use this method (which simplifies its implementation, and I suspect makes it
more robust), and updates PowerPC to do the same.
Fixes PR26761.
Differential Revision: https://reviews.llvm.org/D24038
llvm-svn: 280350
As discussed in https://reviews.llvm.org/D22666, our current mechanism to
support -pg profiling, where we insert calls to mcount(), or some similar
function, is fundamentally broken. We insert these calls in the frontend, which
means they get duplicated when inlining, and so the accumulated execution
counts for the inlined-into functions are wrong.
Because we don't want the presence of these functions to affect optimizaton,
they should be inserted in the backend. Here's a pass which would do just that.
The knowledge of the name of the counting function lives in the frontend, so
we're passing it here as a function attribute. Clang will be updated to use
this mechanism.
Differential Revision: https://reviews.llvm.org/D22825
llvm-svn: 280347
initializers not being in the same order as the members.
Specifically, 'preg' is the first member followed by 'error', so they
will be initialized in that order and should be written in the member
initializer list in that order.
For the constructor in question, there is no change in behavior.
llvm-svn: 280345
We iterate over the result from SafeToMergeTerminators, so make it a SmallSetVector instead of a SmallPtrSet.
Should fix stage3 convergence builds.
llvm-svn: 280342
This is useful when need to defer the construction,
e.g. using Regex as a member of class.
Differential revision: https://reviews.llvm.org/D24101
llvm-svn: 280339
A very important case is not handled here: multiple arcs to a single block with a PHI. Consider:
a:
%1 = icmp %b, 1
br %1, label %c, label %e
c:
%2 = icmp %b, 2
br %2, label %d, label %e
d:
br %e
e:
phi [0, %a], [1, %c], [2, %d]
FoldValueComparisonIntoPredecessors will refuse to fold this, as it doesn't know how to deal with two arcs to a common destination with different PHI values. The answer is obvious - just split all conflicting arcs.
llvm-svn: 280338
Summary:
This change promotes the 'isTailCall(...)' member function to
TargetInstrInfo as a query interface for determining on a per-target
basis whether a given MachineInstr is a tail call instruction. We build
upon this in the XRay instrumentation pass to emit special sleds for
tail call optimisations, where we emit the correct kind of sled.
The tail call sleds look like a mix between the function entry and
function exit sleds. Form-wise, the sled comes before the "jmp"
instruction that implements the tail call similar to how we do it for
the function entry sled. Functionally, because we know this is a tail
call, it behaves much like an exit sled -- i.e. at runtime we may use
the exit trampolines instead of a different kind of trampoline.
A follow-up change to recognise these sleds will be done in compiler-rt,
so that we can start intercepting these initially as exits, but also
have the option to have different log entries to more accurately reflect
that this is actually a tail call.
Reviewers: echristo, rSerge, majnemer
Subscribers: mehdi_amini, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D23986
llvm-svn: 280334
Older versions of clang defined __has_cpp_attribute in C mode, but
would choke on scoped attributes, as per llvm.org/PR23435. Since we
support building with clang all the way back to 3.1, we have to work
around this issue.
llvm-svn: 280326
Previously we were assuming that any visitation of types would
necessarily be against a type we had binary data for. Reasonable
assumption when were just reading PDBs and dumping them, but once
we start writing PDBs from Yaml this breaks down, because we have
no binary data yet, only Yaml, and from that we need to read the
record kind and perform the switch based on that.
So this patch does that. Instead of having the visitor switch
on the kind that is already in the CVType record, we change the
visitTypeBegin() method to return the Kind, and switch on the
returned value. This way, the default implementation can still
return the value from the CVType, but the implementation which
visits Yaml records and serializes binary PDB type records can
use the field in the Yaml as the source of the switch.
llvm-svn: 280307
-fprofile-dir=path allows the user to specify where .gcda files should be
emitted when the program is run. In particular, this is the first flag that
causes the .gcno and .o files to have different paths, LLVM is extended to
support this. -fprofile-dir= does not change the file name in the .gcno (and
thus where lcov looks for the source) but it does change the name in the .gcda
(and thus where the runtime library writes the .gcda file). It's different from
a GCOV_PREFIX because a user can observe that the GCOV_PREFIX_STRIP will strip
paths off of -fprofile-dir= but not off of a supplied GCOV_PREFIX.
To implement this we split -coverage-file into -coverage-data-file and
-coverage-notes-file to specify the two different names. The !llvm.gcov
metadata node grows from a 2-element form {string coverage-file, node dbg.cu}
to 3-elements, {string coverage-notes-file, string coverage-data-file, node
dbg.cu}. In the 3-element form, the file name is already "mangled" with
.gcno/.gcda suffixes, while the 2-element form left that to the middle end
pass.
llvm-svn: 280306
Summary: This patch adds asm.js-style setjmp/longjmp handling support for WebAssembly. It also uses JavaScript's try and catch mechanism.
Reviewers: jpp, dschuff
Subscribers: jfb, dschuff
Differential Revision: https://reviews.llvm.org/D23928
llvm-svn: 280302
This reverts commit r280268, it causes all MSVC 2013 to ICE. This
appears to have been fixed in a later MSVC 2013 update, because I cannot
reproduce it locally. That said, all upstream LLVM bots are broken right
now, so I am reverting.
Also reverts dependent change r280275, "[Hexagon] Deal with undefs when
extending live intervals".
llvm-svn: 280301
We were kind of hacking this together before by embedding the
ability to forward requests into the TypeDeserializer. When
we want to start adding more different kinds of visitor callback
interfaces though, this doesn't scale well and is very inflexible.
So introduce the notion of a pipeline, which itself implements
the TypeVisitorCallbacks interface, but which contains an internal
list of other callbacks to invoke in sequence.
Also update the existing uses of CVTypeVisitor to use this new
pipeline class for deserializing records before visiting them
with another visitor.
llvm-svn: 280293
More preparation for dropping source types from MachineInstrs: regsters coming
out of already-selected code (i.e. non-generic instructions) don't have a type,
but that information is needed so we must add it manually.
This is done via a new G_TYPE instruction.
llvm-svn: 280292
Summary:
If the register has a negative value then unsigned overflow will occur;
this case is sometimes even created intentionally by LSR. For now
disable GA+reg folding. Fixes PR29127
Differential Revision: https://reviews.llvm.org/D24053
llvm-svn: 280285
This is prep work before changing the callers to also use APInt which will
allow folds for splat vectors. Currently, the callers have ConstantInt
guards in place, so no functional change intended with this commit.
llvm-svn: 280282
Summary:
Current implementation of LI verifier isn't ideal and fails to detect
some cases when LI is incorrect. For instance, it checks that all
recorded loops are in a correct form, but it has no way to check if
there are no more other (unrecorded in LI) loops in the function. This
patch adds a way to detect such bugs.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits, silvas, mzolotukhin
Differential Revision: https://reviews.llvm.org/D23437
llvm-svn: 280280
Summary:
Use MemorySSA, if requested, to do less conservative memory dependency
checking.
This change doesn't enable the MemorySSA enhanced EarlyCSE in the
default pipelines, so should be NFC.
Reviewers: dberlin, sanjoy, reames, majnemer
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19821
llvm-svn: 280279
Summary: This fixes some OpenCV tests that were broken by libclc commit r276443.
Reviewers: arsenm, jvesely
Subscribers: arsenm, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D24051
llvm-svn: 280274
that use the Mach::linkedit_data_command type for the load commands that are
currently used in the MachOObjectFile constructor.
This contains the missing checks for LC_DATA_IN_CODE and
LC_LINKER_OPTIMIZATION_HINT load commands and the fields for the
Mach::linkedit_data_command type. Checking for other load commands that
use this type will be added later.
Also fixed a couple of places that was using sizeof(MachOObjectFile::LoadCommandInfo)
that should have been using sizeof(MachO::load_command).
llvm-svn: 280267
Passing the types/opcode check still doesn't guarantee we'll actually vectorize.
Therefore, just make it clear we're attempting to vectorize.
llvm-svn: 280263
Adjust the test to reflect the changes to common handling in r279911.
This test wasn't running due to an incorrect REQUIRES and thus missed
being modified for r279911 before. It was changed to XFAIL when the
bad REQUIRES was discovered.
Remove the XFAIL and move to a new X86 subdirectory that will properly
disable on non-X86.
llvm-svn: 280256
The shape of the vtable is passed down as the size of the
__vtbl_ptr_type. This special pointer type appears both as the pointee
type of the vptr type, and by itself in every dynamic class. For classes
with multiple vtables, only the shape of the primary vftable is
included, as the shape of all secondary vftables will be the same as in
the base class.
Fixes PR28150
llvm-svn: 280254
This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes.
The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate.
Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.)
My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default.
Differential Revision: https://reviews.llvm.org/D24000
llvm-svn: 280250
types. This is the LLVM counterpart and it adds options that map onto FP
exceptions and denormal build attributes allowing better fp math library
selections.
Differential Revision: https://reviews.llvm.org/D24070
llvm-svn: 280246
We check that a sinking candidate is used by only one PHI node during our legality checks. However for instructions that are used by other sinking candidates our heuristic is less conservative. This can result in a candidate actually being illegal when we come to sink it because of how we sunk a predecessor. Do the used-by-only-one-PHI checks again during sinking to ensure we don't crash.
llvm-svn: 280228
Summary:
Simply replace usage of aliases to functions with aliasee.
This came up when bitcode linking to builtin library and
calls to aliases not being resolved.
Also made minor improvements to existing test.
Reviewers: tstellarAMD, alex-t, vpykhtin
Subscribers: arsenm, wdng, rampitec
Differential Revision: https://reviews.llvm.org/D24023
llvm-svn: 280221
We're sinking stores, which is a good thing, but in the process creating selects for the store address operand, which SROA/Mem2Reg can't look through, which caused serious regressions.
The real fix is in SROA, which I'll be looking into.
llvm-svn: 280219
A very important case is not handled here: multiple arcs to a single block with a PHI. Consider:
a:
%1 = icmp %b, 1
br %1, label %c, label %e
c:
%2 = icmp %b, 2
br %2, label %d, label %e
d:
br %e
e:
phi [0, %a], [1, %c], [2, %d]
FoldValueComparisonIntoPredecessors will refuse to fold this, as it doesn't know how to deal with two arcs to a common destination with different PHI values. The answer is obvious - just split all conflicting arcs.
llvm-svn: 280218
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280217
r279460 rewrote this function to be able to handle more than two incoming edges and took pains to ensure this didn't regress anything.
This time we change the logic for determining if an instruction should be sunk. Previously we used a single pass greedy algorithm - sink instructions until one requires more than one PHI node or we run out of instructions to sink.
This had the problem that sinking instructions that had non-identical but trivially the same operands needed extra logic so we sunk them aggressively. For example:
%a = load i32* %b %d = load i32* %b
%c = gep i32* %a, i32 0 %e = gep i32* %d, i32 1
Sinking %c and %e would naively require two PHI merges as %a != %d. But the loads are obviously equivalent (and maybe can't be hoisted because there is no common predecessor).
This is why we implemented the fairly complex function areValuesTriviallySame(), to look through trivial differences like this. However it's just not clever enough.
Instead, throw areValuesTriviallySame away, use pointer equality to check equivalence of operands and switch to a two-stage algorithm.
In the "scan" stage, we look at every sinkable instruction in isolation from end of block to front. If it's sinkable, we keep track of all operands that required PHI merging.
In the "sink" stage, we iteratively sink the last non-terminator in the source blocks. But when calculating how many PHIs are actually required to be inserted (to work out if we should stop or not) we remove any values that have already been sunk from the set of PHI-merges required, which allows us to be more aggressive.
This turns an algorithm with potentially recursive lookahead (looking through GEPs, casts, loads and any other instruction potentially not CSE'd) to two linear scans.
llvm-svn: 280216
This was deliberately disabled during my rewrite of SinkIfThenToEnd to keep behaviour
at least vaguely consistent with the previous version and keep it as close to NFC as
I could.
There's no real reason not to merge sideeffect calls though, so let's do it! Small fixup
along the way to ensure we don't create indirect calls.
Should fix PR28964.
llvm-svn: 280215
Move the comparison function into the only place there it is used,
i.e. the call to std::stable_sort in CoverageMappingWriter::write().
Add sorting by region kinds as it is required to ensure stable order
in our tests and to simplify D23987.
Differential Revision: https://reviews.llvm.org/D24034
llvm-svn: 280198
There were paths where we wouldn't populate the visited set, causing us
to recurse forever if an SSA variable was defined in terms of itself.
This fixes PR30210.
llvm-svn: 280191
When a function contains something, such as inline asm, which explicitly
clobbers the register used as the frame pointer, don't spill it twice. If we
need a frame pointer, it will be saved/restored in the prologue/epilogue code.
Explicitly spilling it again will reuse the same spill slot used by the
prologue/epilogue code, thus clobbering the saved value. The same applies
to the base-pointer or PIC-base register.
Partially fixes PR26856. Thanks to Ulrich for his analysis and the small
inline-asm reproducer.
llvm-svn: 280188
Summary:
1) CoroEarly now lowers llvm.coro.promise intrinsic that allows to obtain
a coroutine promise pointer from a coroutine frame and vice versa.
2) CoroFrame now interprets Promise argument of llvm.coro.begin to
place CoroutinPromise alloca at a deterministic offset from the coroutine frame.
Now, the coroutine promise example from docs\Coroutines.rst compiles and produces expected result (see test/Transform/Coroutines/ex4.ll).
Reviewers: majnemer
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23993
llvm-svn: 280184
It's much less code and easier to read if we don't duplicate
everything between the 'Inside' and not 'Inside' cases.
As noted with the FIXME, the goal is to make this vector-friendly
in a follow-up patch.
llvm-svn: 280183
Summary:
LSV was using two vector sets (heads and tails) to track pairs of adjiacent position to vectorize.
A recent optimization is trying to obtain the longest chain to vectorize and assumes the positions
in heads(H) and tails(T) match, which is not the case is there are multiple tails for the same head.
e.g.:
i1: store a[0]
i2: store a[1]
i3: store a[1]
Leads to:
H: i1
T: i2 i3
Instead of:
H: i1 i1
T: i2 i3
So the positions for instructions that follow i3 will have different indexes in H/T.
This patch resolves PR29148.
This issue also surfaced the fact that if the chain is too long, and TLI
returns a "not-fast" answer, the whole chain will be abandoned for
vectorization, even though a smaller one would be beneficial.
Added a testcase and FIXME for this.
Reviewers: tstellarAMD, arsenm, jlebar
Subscribers: mzolotukhin, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D24057
llvm-svn: 280179
As written, the code should assert if this lookup would have ever
succeeded. Without looking through composite types, the type graph
should be acyclic.
llvm-svn: 280168
Legalization ends up creating many G_SEQUENCE/G_EXTRACT pairs which leads to
inefficient codegen (even for -O0), so add a quick pass over the function to
remove them again.
llvm-svn: 280155
We don't need to limit predication to blocks that have a single incoming
edge, we just need to use the right mask.
This fixes PR30172.
Differential Revision: https://reviews.llvm.org/D24009
llvm-svn: 280148
When binaries are compressed by UPX, information about symbol table
offset and symbol count remain unchanged (but became invalid due to
compression).
This causes failure in the constructor and the rest of the binary cannot
be processed.
Instead, reset symbol related information (symbol/string table pointers,
sizes) - this should disable the related iterators and functions while
the rest of the binary can still be processed.
Patch by Bandzi Michal!
llvm-svn: 280147
We're intending to move to a world where the type of a register is determined
by its (unique) def. This is incompatible with physregs, which are untyped.
It also means the other passes don't have to worry quite so much about
register-class compatibility and inserting COPYs appropriately.
llvm-svn: 280132
Add support for printing the GNU Notes. This allows an easy way to view the
build id for a binary built with the build id. Currently, this only handles the
GNU notes, though it would be easy to extend for other note types (default,
FreeBSD, NetBSD, etc). Only the GNU style is supported currently.
llvm-svn: 280131
Add constants for additional GNU note types and the GNU Notes OS type id. This
is needed to support printing the notes in ELF binaries.
llvm-svn: 280130
Many lists want to override only allocation semantics, or callbacks for
iplist. Split these up to prevent code duplication.
- Specialize ilist_alloc_traits to change the implementations of
deleteNode() and createNode().
- One common desire is to do nothing deleteNode() and disable
createNode(). Specialize ilist_alloc_traits to inherit from
ilist_noalloc_traits for that behaviour.
- Specialize ilist_callback_traits to use the addNodeToList(),
removeNodeFromList(), and transferNodesFromList() callbacks.
As a drive-by, add some coverage to the callback-related unit tests.
llvm-svn: 280128
The existing code hard-coded a limit of 20 instructions for duplication
when a block ended with an indirect branch. Extract this as an option.
No functional change intended.
llvm-svn: 280125
Guarantee that ilist_traits<T>::transferNodesFromList is only called
when nodes are actually changing lists.
I also moved all the callbacks to occur *first*, before the operation.
This is the only choice for iplist<T>::merge, so we might as well be
consistent. I expect this to have no effect in practice, although it
simplifies the logic in both iplist<T>::transfer and iplist<T>::insert.
llvm-svn: 280122
This is a prep commit before splitting up ilist_node_traits and
updating/simplifying call sites.
- Move to top of file (I considered moving to a different file,
llvm/ADT/ilist_traits.h, but it's really not much code).
- Clang-format.
- Convert comments to doxygen, clean them up, and add TODOs for what I'm
doing next.
llvm-svn: 280109
Split out a new, low-level intrusive list type with clear semantics.
Unlike iplist (and ilist), all operations on simple_ilist are intrusive,
and simple_ilist never takes ownership of its nodes. This enables an
intuitive API that has the right defaults for intrusive lists.
- insert() takes references (not pointers!) to nodes (in iplist/ilist,
passing a reference will cause the node to be copied).
- erase() takes only iterators (like std::list), and does not destroy
the nodes.
- remove() takes only references and has the same behaviour as erase().
- clear() does not destroy the nodes.
- The destructor does not destroy the nodes.
- New API {erase,remove,clear}AndDispose() take an extra Disposer
functor for callsites that want to call some disposal routine (e.g.,
std::default_delete).
This list is not currently configurable, and has no callbacks.
The initial motivation was to fix iplist<>::sort to work correctly (even
with callbacks in ilist_traits<>). iplist<> uses simple_ilist<>::sort
directly. The new test in unittests/IR/ModuleTest.cpp crashes without
this commit.
Fixing sort() via a low-level layer provided a good opportunity to:
- Unit test the low-level functionality thoroughly.
- Modernize the API, largely inspired by other intrusive list
implementations.
Here's a sketch of a longer-term plan:
- Create BumpPtrList<>, a non-intrusive list implemented using
simple_ilist<>, and use it for the Token list in
lib/Support/YAMLParser.cpp. This will factor out the only real use of
createNode().
- Evolve the iplist<> and ilist<> APIs in the direction of
simple_ilist<>, making allocation/deallocation explicit at call sites
(similar to simple_ilist<>::eraseAndDispose()).
- Factor out remaining calls to createNode() and deleteNode() and remove
the customization from ilist_traits<>.
- Transition uses of iplist<>/ilist<> that don't need callbacks over to
simple_ilist<>.
llvm-svn: 280107
Or they were not instantiated as expected;
llvm::InnerAnalysisManagerProxy<llvm::AnalysisManager<llvm::Function>, llvm::LazyCallGraph::SCC>::PassID
llvm::InnerAnalysisManagerProxy<llvm::AnalysisManager<llvm::Function>, llvm::LazyCallGraph::SCC>::PassID
llvm-svn: 280105
This reverts commit r280016, and the followups of r280017, r280027,
r280051, r280058, and r280059.
MSVC's implementation of std::promise does not get along with
llvm::Error. It uses its promised value too much like a normal value
type.
llvm-svn: 280100
I've found this out the hard way; LLVM will not normally catch this
error (unless -verify-machineinstrs is passed), and under certain
very specific circumstances (such as register scavenger running
under pressure) this would result in an opaque crash in codegen.
llvm-svn: 280071
The coverage reports contain the source or binary file paths. On Windows,
the file path might contain the seperators of both '/' and '\'. This patch
uses the native path in the coverage reports. For example, on Windows,
all '/' are converted to '\'.
Differential Revision: https://reviews.llvm.org/D23922
llvm-svn: 280061
only) for Expected<T> so that it can interoperate with MSVC's std::future
implementation.
MSVC 2013's std::future implementation requires the wrapped type to be default
constructible.
Hopefully this will fix the bot breakage in
http://lab.llvm.org:8011/builders/clang-x86-win2008-selfhost/builds/9937 .
llvm-svn: 280058
The former is simply wrong -- the code will either never be used or will
always be used, rather than being dependent upon whether it's built with
debug assertions enabled.
The macro DEBUG isn't ever set by the llvm build system. But, the macro
DEBUG(X) is defined (unconditionally) if you happen to include
llvm/Support/Debug.h.
The code in Value.h which was erroneously protected by the #ifdef DEBUG
didn't even compile -- you can't cast<> from an LLVMOpaqueValue
directly. Fortunately, it was never invoked, as Core.cpp included
Value.h before Debug.h.
The conditionalized code in AArch64CollectLOH.cpp was previously always
used, as it includes Debug.h.
llvm-svn: 280056
behaviors, and add a callB (blacking call) primitive.
callB is a blocking call primitive for threaded code where the RPC responses are
being processed on a separate thread. (For single threaded code callST should
continue to be used instead).
No unit test yet: Last time I commited a threaded unit test it deadlocked on
one of the s390x builders. I'll try to re-enable that test first, and add a new
test if I can sort out the deadlock issue.
llvm-svn: 280051
Implement Bill's suggested fix for 32-bit targets for PR22711 (for the
alignment of each entry). As pointed out in the bug report, we could just force
the section alignment, since we only add pointer-sized things currently, but
this fix is somewhat more future-proof.
llvm-svn: 280049
I'm working on a lower-level intrusive list that can be used
stand-alone, and splitting the files up a bit will make the code easier
to organize. Explode the ilist headers in advance to improve blame
lists in the future.
- Move ilist_node_base from ilist_node.h to ilist_node_base.h.
- Move ilist_base from ilist.h to ilist_base.h.
- Move ilist_iterator from ilist.h to ilist_iterator.h.
- Move ilist_node_access from ilist.h to ilist_node.h to support
ilist_iterator.
- Update unit tests to #include smaller headers.
- Clang-format the moved things.
I noticed in transit that there is a simplify_type specialization for
ilist_iterator. Since there is no longer an implicit conversion from
ilist<T>::iterator to T*, this doesn't make sense (effectively it's a
form of implicit conversion). For now I've added a FIXME.
llvm-svn: 280047
The "long call" option forces the use of the indirect calling sequence for all
calls (even those that don't really need it). GCC provides this option; This is
helpful, under certain circumstances, for building very-large binaries, and
some other specialized use cases.
Fixes PR19098.
llvm-svn: 280040
Summary:
Changed this code because it was not very readable.
The one question that I got after changing it is, should we
count calls to intrinsics? We don't add them to caller summary,
so maybe we shouldn't also count them?
Reviewers: tejohnson, eraman, mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23949
llvm-svn: 280036
And rename the tests inside from ilistTest to IListTest. This makes the
file sort properly in the CMakeLists.txt (previously, sorting would
throw it down to the end of the list) and is consistent with the tests
I've added more recently.
Why use IListNodeBaseTest.cpp (and a test name of IListNodeBaseTest)?
- ilist_node_base_test is the obvious thing, since this is testing
ilist_node_base. However, gtest disallows underscores in test names.
- ilist_node_baseTest fails for the same reason.
- ilistNodeBaseTest is weird, because it isn't in our usual
TitleCaseTest form that we use for tests, and it also doesn't have the
name of the tested class in it.
- IlistNodeBaseTest matches TitleCaseTest, but "Ilist" is hard to read,
and really "ilist" is an abbreviation for "IntrusiveList" so the
lowercase "list" is strange.
- That left IListNodeBaseTest.
Note: I made this move in two stages, with a temporary filename of
ilistTestTemp in between in r279524. This was in the hopes of avoiding
problems on Git and SVN clients on case-insensitive filesystems,
particularly on buildbots with incremental checkouts.
llvm-svn: 280033
Reverse iterators to doubly-linked lists can be simpler (and cheaper)
than std::reverse_iterator. Make it so.
In particular, change ilist<T>::reverse_iterator so that it is *never*
invalidated unless the node it references is deleted. This matches the
guarantees of ilist<T>::iterator.
(Note: MachineBasicBlock::iterator is *not* an ilist iterator, but a
MachineInstrBundleIterator<MachineInstr>. This commit does not change
MachineBasicBlock::reverse_iterator, but it does update
MachineBasicBlock::reverse_instr_iterator. See note at end of commit
message for details on bundle iterators.)
Given the list (with the Sentinel showing twice for simplicity):
[Sentinel] <-> A <-> B <-> [Sentinel]
the following is now true:
1. begin() represents A.
2. begin() holds the pointer for A.
3. end() represents [Sentinel].
4. end() holds the poitner for [Sentinel].
5. rbegin() represents B.
6. rbegin() holds the pointer for B.
7. rend() represents [Sentinel].
8. rend() holds the pointer for [Sentinel].
The changes are #6 and #8. Here are some properties from the old
scheme (which used std::reverse_iterator):
- rbegin() held the pointer for [Sentinel] and rend() held the pointer
for A;
- operator*() cost two dereferences instead of one;
- converting from a valid iterator to its valid reverse_iterator
involved a confusing increment; and
- "RI++->erase()" left RI invalid. The unintuitive replacement was
"RI->erase(), RE = end()".
With vector-like data structures these properties are hard to avoid
(since past-the-beginning is not a valid pointer), and don't impose a
real cost (since there's still only one dereference, and all iterators
are invalidated on erase). But with lists, this was a poor design.
Specifically, the following code (which obviously works with normal
iterators) now works with ilist::reverse_iterator as well:
for (auto RI = L.rbegin(), RE = L.rend(); RI != RE;)
fooThatMightRemoveArgFromList(*RI++);
Converting between iterator and reverse_iterator for the same node uses
the getReverse() function.
reverse_iterator iterator::getReverse();
iterator reverse_iterator::getReverse();
Why doesn't iterator <=> reverse_iterator conversion use constructors?
In order to catch and update old code, reverse_iterator does not even
have an explicit conversion from iterator. It wouldn't be safe because
there would be no reasonable way to catch all the bugs from the changed
semantic (see the changes at call sites that are part of this patch).
Old code used this API:
std::reverse_iterator::reverse_iterator(iterator);
iterator std::reverse_iterator::base();
Here's how to update from old code to new (that incorporates the
semantic change), assuming I is an ilist<>::iterator and RI is an
ilist<>::reverse_iterator:
[Old] ==> [New]
reverse_iterator(I) (--I).getReverse()
reverse_iterator(I) ++I.getReverse()
--reverse_iterator(I) I.getReverse()
reverse_iterator(++I) I.getReverse()
RI.base() (--RI).getReverse()
RI.base() ++RI.getReverse()
--RI.base() RI.getReverse()
(++RI).base() RI.getReverse()
delete &*RI, RE = end() delete &*RI++
RI->erase(), RE = end() RI++->erase()
=======================================
Note: bundle iterators are out of scope
=======================================
MachineBasicBlock::iterator, also known as
MachineInstrBundleIterator<MachineInstr>, is a wrapper to represent
MachineInstr bundles. The idea is that each operator++ takes you to the
beginning of the next bundle. Implementing a sane reverse iterator for
this is harder than ilist. Here are the options:
- Use std::reverse_iterator<MBB::i>. Store a handle to the beginning of
the next bundle. A call to operator*() runs a loop (usually
operator--() will be called 1 time, for unbundled instructions).
Increment/decrement just works. This is the status quo.
- Store a handle to the final node in the bundle. A call to operator*()
still runs a loop, but it iterates one time fewer (usually
operator--() will be called 0 times, for unbundled instructions).
Increment/decrement just works.
- Make the ilist_sentinel<MachineInstr> *always* store that it's the
sentinel (instead of just in asserts mode). Then the bundle iterator
can sniff the sentinel bit in operator++().
I initially tried implementing the end() option as part of this commit,
but updating iterator/reverse_iterator conversion call sites was
error-prone. I have a WIP series of patches that implements the final
option.
llvm-svn: 280032
Move SDLoc initialization to comon place.
fall back to AMDGPU version in one place
Differential Revision: https://reviews.llvm.org/D23900
llvm-svn: 280030
Summary:
Fix a couple issues limiting the application of indirect call promotion
in ThinLTO mode:
- Invoke indirect call promotion before globalopt, since it may
eliminate imported functions which appear unreferenced.
- Invoke indirect call promotion with InLTO=true so that the PGOFuncName
metadata is used to get the name for locals which would have been
renamed during promotion.
Reviewers: davidxl, mehdi_amini
Subscribers: Prazek, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24004
llvm-svn: 280024
For little-Endian PowerPC, we generally target only P8 and later by default.
However, generic (older) 64-bit configurations are still an option, and in that
case, partword atomics are not available (e.g. stbcx.). To lower i8/i16 atomics
without true i8/i16 atomic operations, we emulate using i32 atomics in
combination with a bunch of shifting and masking, etc. The amount by which to
shift in little-Endian mode is different from the amount in big-Endian mode (it
is inverted -- meaning we can leave off the xor when computing the amount).
Fixes PR22923.
llvm-svn: 280022
Optional.
For void functions the return type of a nonblocking call changes from
Expected<future<Optional<bool>>> to Expected<future<Error>>, and for functions
returning T the return type changes from Expected<future<Optional<T>>> to
Expected<future<Expected<T>>>.
Inner results need to be checked (since the RPC connection may have dropped
out before a result came back) and Error/Expected provide stronger checking
requirements. It also allows us drop the crufty 'optionalToError' function and
just collapse Errors in the single-threaded call primitives.
llvm-svn: 280016
With the runtimes build we're trying to use LLVMConfig.cmake as a way of providing LLVM_* variables that are needed to behave as if the project is building in tree. To make this work we need to rename two variables by dropping the "S" from the end. This makes the variables match the in-tree names.
This renames:
LLVM_INCLUDE_DIRS -> LLVM_INCLUDE_DIR
LLVM_LIBRARY_DIRS -> LLVM_LIBRARY_DIR
The versions ending in S are not used in-tree anywhere. This also cleans up LLVM_LIBRARY_DIR being set to the same value with and without the "S".
llvm-svn: 280013
Instead of putting all possible requests into a single table, we can perform
the extremely dense lookup based on opcode and type-index in constant time
using multi-dimensional array-like things.
This roughly halves the time spent doing legalization, which was dominated by
queries against the Actions table.
llvm-svn: 280011
According to the arm arm specifications, 4 bytes are needed for a shift instead
of 8, this was causing the movt instruction to write to a different register
sometimes.
Patch by Walter Erquinigo!
llvm-svn: 280005
This allows the builtins archives to build into the correct subdirectory under the binary dir. Addresses the issue discussed in D24001.
llvm-svn: 280002
After r279649 when getting a vector value from VectorLoopValueMap, we create an
insertelement sequence on-demand if the value has been scalarized instead of
vectorized. We previously inserted this insertelement sequence before the
value's first vector user. However, this insert location is problematic if that
user is the phi node of a first-order recurrence. With this patch, we move the
insertelement sequence after the last scalar instruction we created when
scalarizing the value. Thus, the value's vector definition in the new loop will
immediately follow its scalar definitions. This should fix PR30183.
Reference: https://llvm.org/bugs/show_bug.cgi?id=30183
llvm-svn: 280001
Summary:
The SILoadStoreOptimizer can now look ahead more then one instruction when
looking for instructions to merge, which greatly improves the number of
loads/stores that we are able to merge.
Moving the pass before scheduling avoids increasing register pressure after
the scheduler, so that the scheduler's register pressure estimates will be
more accurate. It also gives more consistent results, since it is no longer
affected by minor scheduling changes.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: https://reviews.llvm.org/D23814
llvm-svn: 279991
There should be no functional change here, I'm just making the implementation
of "frem" (to libcall) legalization easier for a followup.
llvm-svn: 279987
This bug shows up with diamonds that share unpredicable, unanalyzable branches.
There's an included test case from Hexagon. What was happening was that we were
attempting to predicate the branch instruction despite the fact that it was
checked to be the same. Now for unanalyzable branches we skip over the branch
instructions when predicating the block.
Differential Revision: https://reviews.llvm.org/D23939
llvm-svn: 279985
Summary:
Calling __asan_poison_stack_memory and __asan_unpoison_stack_memory for small
variables is too expensive.
Code is disabled by default and can be enabled by -asan-experimental-poisoning.
PR27453
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23947
llvm-svn: 279984
Summary: No functional changes, just refactoring to make D23947 simpler.
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23954
llvm-svn: 279982
With r279911 I accidentally regressed the gold/X86/start-lib-common.ll
test for newer golds (v1.12+) that honor the --start-lib/--end-lib.
Remove the alignment which should not be there to make this work with
both old and new gold linkers.
Additionally, now that we have a subdirectory for v1.12+ gold tests,
copy this test there and check specifically for the v1.12+ behavior.
llvm-svn: 279977
Summary:
While walking the use chain for identifying rematerializable values in RS4GC,
add the case where the current value and base value are the same PHI nodes.
This will aid rematerialization of geps and casts instead of relocating.
Reviewers: sanjoy, reames, igor
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23920
llvm-svn: 279975
Assuming the default FP env, we should not treat fdiv and frem any differently in terms of
trapping behavior than any other FP op. Ie, FP ops do not trap with the default FP env.
This matches how we treat the fdiv/frem in IR with isSafeToSpeculativelyExecute() and in
the backend after:
https://reviews.llvm.org/rL279970
llvm-svn: 279973
Summary:
[Coroutines] Part 9: Add cleanup subfunction.
This patch completes coroutine heap allocation elision. Now, the heap elision example from docs\Coroutines.rst compiles and produces expected result (see test/Transform/Coroutines/ex3.ll)
Intrinsic Changes:
* coro.free gets a token parameter tying it to coro.id to allow reliably discovering all coro.frees associated with a particular coroutine.
* coro.id gets an extra parameter that points back to a coroutine function. This allows to check whether a coro.id describes the enclosing function or it belongs to a different function that was later inlined.
CoroSplit now creates three subfunctions:
# f$resume - resume logic
# f$destroy - cleanup logic, followed by a deallocation code
# f$cleanup - just the cleanup code
CoroElide pass during devirtualization replaces coro.destroy with either f$destroy or f$cleanup depending whether heap elision is performed or not.
Other fixes, improvements:
* Fixed buglet in Shape::buildFrame that was not creating coro.save properly if coroutine has more than one suspend point.
* Switched to using variable width suspend index field (no longer limited to 32 bit index field can be as little as i1 or as large as i<whatever-size_t-is>)
Reviewers: majnemer
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23844
llvm-svn: 279971
Assuming the default FP env, we should not treat fdiv and frem any differently in terms of
trapping behavior than any other FP op. Ie, FP ops do not trap with the default FP env.
This matches how we treat these ops in IR with isSafeToSpeculativelyExecute(). There's a
similar bug in Constant::canTrap().
This bug manifests in PR29114:
https://llvm.org/bugs/show_bug.cgi?id=29114
...as a sequence of scalar divisions instead of a vector division on x86 for a <3 x float>
type.
Differential Revision: https://reviews.llvm.org/D23974
llvm-svn: 279970
MRI::getMaxLaneMaskForVReg does not always cover the whole register.
For example, on X86 the upper 16 bits of EAX cannot be accessed via
any subregister. Consequently, there is no lane mask that only covers
that part of EAX. The getMaxLaneMaskForVReg will return the union of
the lane masks for all subregisters, and in case of EAX, that union
will not cover the upper 16 bits.
This fixes https://llvm.org/bugs/show_bug.cgi?id=29132
llvm-svn: 279969
Summary:
For shrinking SOPK instructions, we were creating a hint to tell the
register allocator to use the register allocated for src0 for the dst
operand as well. However, this seems to not work sometimes depending
on the order virtual registers are assigned physical registers.
To fix this, I've added a second allocation hint which does the reverse,
asks that the register allocated for dst is used for src0.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23862
llvm-svn: 279968
Summary:
The SILoadStoreOptimizer will need to use AliasAnalysis here in order to
move it before scheduling.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23813
llvm-svn: 279963
The problem occurs when the Node doesn't updated in place , UpdateNodeOperation() return the node that already exist.
In this case assert fail in PromoteIntegerOperand() , N have 2 results ( val + chain).
Differential Revision: http://reviews.llvm.org/D23756
llvm-svn: 279961
switch to using one indirect stub manager per logical dylib rather than one per
input module.
LogicalDylib is a helper class used by the CompileOnDemandLayer to manage
symbol resolution between modules during lazy compilation. In particular, it
ensures that internal symbols resolve correctly even in the case where multiple
input modules contain the same internal symbol name (which must to be promoted
to external hidden linkage so that functions in any given module can be split
out by lazy compilation). LogicalDylib's resolution scheme (before this commit)
required one stub-manager per input module. This made recompilation of functions
(by adding a module containing a new definition) difficult, as the stub manager
for any given symbol was bound to the module that supplied the original
definition. By using one stubs manager for the whole logical dylib symbols can
be more easily replaced, although support for doing this is not included in this
patch (it will be implemented in a follow up).
llvm-svn: 279952
Over eager combing prevents the correct folding of writemasks.
At the moment this occurs for ALL EVEX shuffles, in the future we need to check that the user of the root shuffle is a VSELECT that can fold to a writemask.
llvm-svn: 279934
Fixed a bug in run-time checks for possible memory conflicts inside loop.
The bug is in Low <-> High boundaries calculation. The High boundary should be calculated as "last memory access pointer + element size".
Differential revision: https://reviews.llvm.org/D23176
llvm-svn: 279930
Previously we weren't creating masked logical operations if bitcasts appeared between the logic operation and the select. The IR optimizers can move bitcasts across logic operations and create these cases. To minimize the number of cases we need to handle, this change promotes all logic ops to an i64 vector type just like when only SSE or AVX is available.
Unfortunately, this also has the consequence of making it difficult to select unmasked VPANDD/VPORD/VPXORD in all the cases it was previously used. This is the cause of most of the test change. This shouldn't result in any functional change though.
llvm-svn: 279929
Summary:
This addresses a regression in common handling from the new LTO
API in r278338. Only create a new common if the size is different.
The type comparison against an array type fails when the size is
different but not an array. GlobalMerge does not handle the
array types as well and we lose some global merging opportunities.
Reviewers: mehdi_amini
Subscribers: junbuml, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23955
llvm-svn: 279911
Without invalidating the entries in the MD cache we would try to access instructions
that were removed in previous iterations of hoisting.
Differential Revision: https://reviews.llvm.org/D23927
llvm-svn: 279907
There's only one use of this for the convenience
of a pattern. I think v_mov_b64_pseudo should also be
moved, but SIFoldOperands does currently make use of it.
llvm-svn: 279901
It isn't used for anything, and is also misleading since
it could be spilled at the end of the block, so it can't be relied
on. There ends up being a verifier error about using an undefined
register since the spill kills the register.
llvm-svn: 279899
Generating the Components import file is useless if there are no components coming in from the runtimes configuration, so we should skip generation in that case.
This also should fix the configuration error that Renato reported on llvm-dev.
llvm-svn: 279893
When global-isel fails on a MachineFunction MF, MF will be cleaned up
and given to SDISel.
Thanks to this fallback, we can already perform correctness test even if
we support only a small portion of the functions in a test.
llvm-svn: 279891
Adds a baseline test for lowering shuffles where the width of the output
vector is not twice the size of the input vectors. Many of those sequences
are suboptimal, and will hopefully be improved in follow-up patches.
llvm-svn: 279888
This is used to communicate that the instruction selection pipeline
failed at some point.
Another way to achieve that would be to have some kind of conditional
scheduling in the PassManager, such that we only schedule a pass based
on the success/failure of another one. The property approach has the
advantage of being lightweight and solve the problem at stake.
llvm-svn: 279885
Summary:
Have the cache pass back the path to the cache entry when it
is ready to be loaded, instead of a buffer.
For gold-plugin we can simply pass this file back to gold directly,
which avoids expensive writing of a separate tmp file. Ensure
the cache entry is not deleted on cleanup by adjusting the setting
of the IsTemporary flags.
Moved the loading of the buffer into llvm-lto2 to maintain current
behavior.
Reviewers: mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23946
llvm-svn: 279883
By default, this hook tells GlobalISel to abort (report a fatal error)
when it encounters an error. The alternative will be to fall back on
SDISel.
This fall back will be removed when the bring-up of GlobalISel is over.
llvm-svn: 279879
This method allows to reset the state of a MachineFunction as if it was
just created. This will be used during the bring-up of GlobalISel to
provide a way to fallback on SelectionDAG. That way, we can start doing
correctness testing even if we are not able to select all functions via
the global instruction selector.
llvm-svn: 279876
This mapping is between pointers, which DenseMap is particularly good
at. Most targets aren't really affected, but if there's a lot of
subregister composition this can shave off a good chunk of time from
generating registers.
llvm-svn: 279875
Summary:
If the scheduler clusters the loads, then the offsets will be sorted,
but it is possible for the scheduler to scheduler loads together
without out explicitly clustering them, which would give us non-sorted
offsets.
Also, we will want to do this if we move the load/store optimizer before
the scheduler.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23776
llvm-svn: 279870
Summary:
There are a few different sgpr pressure sets, but we only care about
the one which covers all of the sgprs. We were using hard-coded
register pressure set names to determine the reg set id for the
biggest sgpr set. However, we were using the wrong name, and this
method is pretty fragile, since the reg pressure set names may
change.
The new method just looks for the pressure set that contains the most
reg units and sets that set as our SGPR pressure set. We've also
adopted the same technique for determining our VGPR pressure set.
Reviewers: arsenm
Subscribers: MatzeB, arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23687
llvm-svn: 279867
This will expose the check targets for runtime project components into the top-level build. It will enable exposing targets like check-asan.
llvm-svn: 279861
Summary:
This is obviously an interesting case because it may motivate code
restructuring or LTO.
Reporting this requires instantiation of ORE in the loop where the call
sites are first gathered. I've checked compile-time
overhead *with* -Rpass-with-hotness and the worst slow-down was 6% in
mcf and quickly tailing off. As before without -Rpass-with-hotness
there is no overhead.
Because this could be a pretty noisy diagnostics, it is currently
qualified as 'verbose'. As of this patch, 'verbose' diagnostics are
only emitted with -Rpass-with-hotness, i.e. when the output is expected
to be filtered.
Reviewers: eraman, chandlerc, davidxl, hfinkel
Subscribers: tejohnson, Prazek, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D23415
llvm-svn: 279860
We need to explicitly pass LLVM_INCLUDE_TESTS through from the top-level to the runtimes configuration because it isn't in LLVMConfig.cmake
llvm-svn: 279857
We already have obtained a pointer to the underlying GlobalObject,
use it directly to find the comdat, rather than using the
GlobalValue::getComdat which will do the same thing again.
llvm-svn: 279856
In the code to detect fixed-point conversions and make use of AArch64's special
instructions, we weren't prepared for weird types. The fptosi direction got
fixed recently, but not the similar sitofp code.
llvm-svn: 279852
Like other recent changes near here, the goal is to allow vector types for
all of these folds. Splitting things up makes it easier to incrementally
enhance the code and easier to read.
llvm-svn: 279851
MCContext already has many tasks, and separating CodeView out from it is
probably a good idea. The .cv_loc tracking was modelled on the DWARF
tracking which lived directly in MCContext.
Removes the inclusion of MCCodeView.h from MCContext.h, so now there are
only 10 build actions while I hack on CodeView support instead of 265.
llvm-svn: 279847
It's unclear how the old
%res(32) = G_ICMP { s32, s32 } intpred(eq), %0, %1
is actually different from an s1 verison
%res(1) = G_ICMP { s1, s32 } intpred(eq), %0, %1
so we'll remove it for now.
llvm-svn: 279843
Summary: Dead store elimination gets very expensive when large numbers of instructions need to be analyzed. This patch limits the number of instructions analyzed per store to the value of the memdep-block-scan-limit parameter (which defaults to 100). This resulted in no observed difference in performance of the generated code, and no change in the statistics for the dead store elimination pass, but improved compilation time on some files by more than an order of magnitude.
Reviewers: dexonsmith, bruno, george.burgess.iv, dberlin, reames, davidxl
Subscribers: davide, chandlerc, dberlin, davidxl, eraman, tejohnson, mbodart, llvm-commits
Differential Revision: https://reviews.llvm.org/D15537
llvm-svn: 279833
1. Add the "explicit" specifier to the single-argument constructor of Pattern
2. Reorder the fields to remove excessive padding (8 bytes).
Patch by Alexander Shaposhnikov!
llvm-svn: 279832
We can't mark ORE (a function pass) preserved as required by the loop
passes because that is how we ensure that the required passes like
LazyBFI are all available any time ORE is used. See the new comments in
the patch.
Instead we use it directly just like the inliner does in D22694.
As expected there is some additional overhead after removing the caching
provided by analysis passes. The worst case, I measured was
LNT/CINT2006_ref/401.bzip2 which regresses by 12%. As before, this only
affects -Rpass-with-hotness and not default compilation.
llvm-svn: 279829
Removing the redundant 'CmpRHSV' local variable exposes a bug in the caller
foldICmpShrConstant() - it was sending in the div constant instead of the
cmp constant. But I have not been able to expose this in a regression test
yet - the affected folds all appear to be handled before we ever reach this
code. I'll keep trying to find a case as I make changes to allow vector folds
in both functions.
llvm-svn: 279828
Summary:
In fuctions that contained debug info but were empty otherwise,
the ARM load/store optimizer could abort. This was because
function MergeReturnIntoLDM handled the special case where a
Machine Basic BLock is empty by calling MBB.empty(). However, this
returns false in presence of debug info, although the function
should be considered empty in the eyes of the load/store optimizer.
This has been fixed by handling the case where searching through the
block finds only debug instructions.
Reviewers: rengolin, dexonsmith, llvm-commits, jmolloy
Subscribers: t.p.northover, aemerson, rengolin, samparker
Differential Revision: https://reviews.llvm.org/D23847
llvm-svn: 279820
This function allows getting arbitrary sized block of random bytes.
Primary motivation is support for --build-id=uuid in lld.
Differential revision: https://reviews.llvm.org/D23671
llvm-svn: 279807
This was for some reason skipping operands that are subregisters
instead of keeping the same subregister index.
v_movreld_b32 expects src0 to be the subregister of the tied
super register use/def.
e.g.
v_movreld_b32 v0, v9, <imp-def, tied3> v[0:3], <imp-use, tied2> v[0:3]
was being replaced with
v[4:7] = copy v[0:3]
v_movreld_b32 v0, v9, <imp-def, tied3> v[4:7], <imp-use, tied2> v[4:7],
which really writes to v[0:3]
llvm-svn: 279804
The assertion doesn't always hold true as sizeof(SDNodeBits) isn't equal
to sizeof(uint16_t) for some targets. For example, sizeof(SDNodeBits)
evaluates to 1, not 2, for ARM's APCS targets.
llvm-svn: 279797
This reverts most of r274613 (AKA r274626) and its follow-ups (r276347, r277289),
due to miscompiles in the test suite. The FastISel change was left in, because
it apparently fixes an unrelated issue.
(Recommit of r279782 which was broken due to a bad merge.)
This fixes 4 out of the 5 test failures in PR29112.
llvm-svn: 279788
The InitializerList test had undefined behavior by creating a dangling pointer to the temporary initializer list. This patch removes the undefined behavior in the test by creating the initializer list directly.
Reviewers: mehdi_amini, dblaikie
Differential Revision: https://reviews.llvm.org/D23890
llvm-svn: 279783
This reverts most of r274613 and its follow-ups (r276347, r277289), due to
miscompiles in the test suite. The FastISel change was left in, because it
apparently fixes an unrelated issue.
This fixes 4 out of the 5 test failures in PR29112.
llvm-svn: 279782
Summary:
Install CheckAtomic.cmake along with other LLVM modules, therefore making it possible for other projects to use it. This file is needed for LLDB to be built standalone, and installing it was suggested in https://reviews.llvm.org/D23881.
Patch by: Michał Górny
Reviewers: krytarowski, zturner, eugenis, jyknight, labath, beanz
Subscribers: beanz, llvm-commits
Differential Revision: https://reviews.llvm.org/D23887
llvm-svn: 279777
This patch adds support to the runtimes build for exposing sub-project targets through the high-level configuration. This will enable exposing the build, check and install targets for sub-project components (i.e. asan, check-asan, install-asan...).
This patch requires minor changes to the runtime projects to take advantage of it, and I'll phase those changes into Compiler-RT shortly.
llvm-svn: 279776
Its existence is largely historical, apparently we tried to make ARM object
files look maybe-almost-possibly runnable by putting our best guess at the
actual value into relocated locations. Of course, the real linker then comes
along and can completely change things.
But it should only be there for word-sized and movw/movt relocations. It can't
be encoded in branch relocations, and I've seen it mess up validity
calculations twice in the last couple of weeks so the default is clearly problematic.
llvm-svn: 279773
Summary:
This fixes pr29105. The reason is that lifetime marks creates new
aliasing pointers the original ones, but before this patch aliases
were not checked in performMemCpyToMemSetOptzn.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23846
llvm-svn: 279769
The 32-bit variants of these operations don't depend on the bits not being
operated on, so they also naturally model operations narrower than the actual
register width.
llvm-svn: 279760
Fix VPAVG detection to require AVX512BW, not AVX512F for 512-bit widths,
and change associated asserts to assert in the right direction...
This fixes PR29111.
llvm-svn: 279755
when unroll runtime iteration loop.
In llvm::UnrollRuntimeLoopRemainder, if the loop to be unrolled is the inner
loop inside a loop nest, the scalar evolution needs to be dropped for its
parent loop which is done by ScalarEvolution::forgetLoop. However, we can
postpone forgetLoop to the end of UnrollRuntimeLoopRemainder so TripCountSC
expansion can still reuse existing value.
Differential Revision: https://reviews.llvm.org/D23572
llvm-svn: 279748
It is invalid to hoist stores or loads if they are not executed on all paths
from the hoisting point to the exit of the function. In the testcase, there are
paths in the loop that do not execute the stores or the loads, and so hoisting
them within the loop is unsafe.
The problem is that the current implementation of hoistingFromAllPaths is
incomplete: it walks all blocks dominated by the hoisting point, and does not
return false when the loop contains a path on which the hoisted ld/st is
not executed.
Differential Revision: https://reviews.llvm.org/D23843
llvm-svn: 279732
There's no reason for it to return a signed type. Just return the operand bias in each if instead of starting from 0 and adding in the 'if'.
llvm-svn: 279720
Hal Finkel