The definition of `pointer_iterator` omits what should be a `iterator_traits::<>::iterator_category` parameter from `iterator_adaptor_base`. As a result, iterators based on `pointer_iterator` always have defaulted value types and the wrong iterator category.
The definition of `pointee_iterator` just a few lines above does this correctly.
This resolves [[ https://bugs.llvm.org/show_bug.cgi?id=39617 | bug 39617 ]].
Patch by Dylan MacKenzie!
Reviewers: dblaikie
Differential Revision: https://reviews.llvm.org/D54377
llvm-svn: 346833
Summary:
Re-worked SparseBitVector's most-recently-used-word caching (CurrElementIter)
such that SparseBitVector::test() can be made const. This came up when
attempting to test individual bits in a SparseBitVector which was a member of a
const object.
The cached iterator has no bearing on the externally visible state, it's merely
a performance optimization. Therefore it has been made mutable and
FindLowerBound() has been split into a const and non-const function
(FindLowerBound/FindLowerBoundConst) for the const/non-const
interfaces.
Reviewers: rtereshin
Reviewed By: rtereshin
Subscribers: rtereshin, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D53447
llvm-svn: 345772
This removes the assertion that a copy of a moved-from SmallSetIterator
equals the original, which is illegal due to SmallSetIterator including
an instance of a standard `std::set` iterator.
C++ [iterator.requirements.general] states that comparing singular
iterators has undefined result:
> Iterators can also have singular values that are not associated with
> any sequence. [...] Results of most expressions are undefined for
> singular values; the only exceptions are destroying an iterator that
> holds a singular value, the assignment of a non-singular value to an
> iterator that holds a singular value, and, for iterators that satisfy
> the Cpp17DefaultConstructible requirements, using a value-initialized
> iterator as the source of a copy or move operation.
This assertion triggers the following error in the GNU C++ Library in
debug mode under EXPENSIVE_CHECKS:
/usr/include/c++/8.2.1/debug/safe_iterator.h:518:
Error: attempt to compare a singular iterator to a singular iterator.
Objects involved in the operation:
iterator "lhs" @ 0x0x7fff86420670 {
state = singular;
}
iterator "rhs" @ 0x0x7fff86420640 {
state = singular;
}
Patch by Eugene Sharygin.
Reviewers: fhahn, dblaikie, chandlerc
Reviewed By: fhahn, dblaikie
Differential Revision: https://reviews.llvm.org/D53793
llvm-svn: 345712
constructor for DenseMap (DenseSet already had an initializer_list constructor).
These changes make it easier to migrate existing code that uses std::map and
std::set (which support initializer_list construction and equality comparison)
to DenseMap and DenseSet.
llvm-svn: 344522
Summary:
These new intrinsics have the semantics of the `minimum` and `maximum`
operations specified by the latest draft of IEEE 754-2018. Unlike
llvm.minnum and llvm.maxnum, these new intrinsics propagate NaNs and
always treat -0.0 as less than 0.0. `minimum` and `maximum` lower
directly to the existing `fminnan` and `fmaxnan` ISel DAG nodes. It is
safe to reuse these DAG nodes because before this patch were only
emitted in situations where there were known to be no NaN arguments or
where NaN propagation was correct and there were known to be no zero
arguments. I know of only four backends that lower fminnan and
fmaxnan: WebAssembly, ARM, AArch64, and SystemZ, and each of these
lowers fminnan and fmaxnan to instructions that are compatible with
the IEEE 754-2018 semantics.
Reviewers: aheejin, dschuff, sunfish, javed.absar
Subscribers: kristof.beyls, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D52764
llvm-svn: 344437
Debian uses different triples for MIPS r6 and paths. Here we use SubArch
to determine whether it is r6, if we found `r6' in CPU section of triple.
These new triples include:
mipsisa32r6-linux-gnu
mipsisa32r6el-linux-gnu
mipsisa64r6-linux-gnuabi64
mipsisa64r6el-linux-gnuabi64
mipsisa64r6-linux-gnuabin32
mipsisa64r6el-linux-gnuabin32
Patch by YunQiang Su.
Differential revision: https://reviews.llvm.org/D50857
llvm-svn: 343185
Add a higher performance alternative to calling resize() every time which performs a lot of clearing to zero - when we're adding a single bit most of the time this will be completely unnecessary.
Differential Revision: https://reviews.llvm.org/D52236
llvm-svn: 342535
Add support mips64(el)-linux-gnuabin32 triples, and set them to N32.
Debian architecture name mipsn32/mipsn32el are also added. Set
UseIntegratedAssembler for N32 if we can detect it.
Patch by YunQiang Su.
Differential revision: https://reviews.llvm.org/D51408
llvm-svn: 342416
Also adjust some of dsymutil's headers to put the header guards at the top,
otherwise the compiler will not recognize them as header guards.
llvm-svn: 341323
I changed the seed slightly, but forgot to run the tests on a 32-bit system, so
tests which hard-code a specific hash value started breaking.
llvm-svn: 341240
ImmutableList used to require elements to have a copy constructor for no
good reason, this patch aims to fix this.
It also required but did not enforce its elements to be trivially
destructible, so a new static_assert is added to guard against misuse.
Differential Revision: https://reviews.llvm.org/D49985
llvm-svn: 340824
HermitCore is a POSIX-compatible kernel for running a single application in an isolated environment to get maximum performance and predictable runtime behavior. It can either be used bare-metal on hardware or a VM (Unikernel) or side by side to an existing Linux system (Multikernel).
Due to the latter feature, HermitCore binaries are marked with ELFOSABI_STANDALONE to let the Linux ELF loader distinguish them from regular Unix/Linux binaries and load them using the HermitCore "proxy" tool.
Patch by Colin Finck!
llvm-svn: 340675
LLVM triple normalization is handling "unknown" and empty components
differently; for example given "x86_64-unknown-linux-gnu" and
"x86_64-linux-gnu" which should be equivalent, triple normalization
returns "x86_64-unknown-linux-gnu" and "x86_64--linux-gnu". autoconf's
config.sub returns "x86_64-unknown-linux-gnu" for both
"x86_64-linux-gnu" and "x86_64-unknown-linux-gnu". This changes the
triple normalization to behave the same way, replacing empty triple
components with "unknown".
This addresses PR37129.
Differential Revision: https://reviews.llvm.org/D50219
llvm-svn: 339294
This allows us to model the common LLVM idiom of incrementing
immediately after dereferencing so that we can remove or update the
entity w/o losing our ability to reach the "next".
However, these are not real or proper iterators. They are just enough to
allow range based for loops and very simple range algorithms to work,
but should not be considered full general.
Differential Revision: https://reviews.llvm.org/D49956
llvm-svn: 338955
The standard library functions ::isprint/std::isprint have platform-
and locale-dependent behavior which makes LLVM's output less
predictable. In particular, regression tests my fail depending on the
implementation of these functions.
Implement llvm::isPrint in StringExtras.h with a standard behavior and
replace all uses of ::isprint/std::isprint by a call it llvm::isPrint.
The function is inlined and does not look up language settings so it
should perform better than the standard library's version.
Such a replacement has already been done for isdigit, isalpha, isxdigit
in r314883. gtest does the same in gtest-printers.cc using the following
justification:
// Returns true if c is a printable ASCII character. We test the
// value of c directly instead of calling isprint(), which is buggy on
// Windows Mobile.
inline bool IsPrintableAscii(wchar_t c) {
return 0x20 <= c && c <= 0x7E;
}
Similar issues have also been encountered by Julia:
https://github.com/JuliaLang/julia/issues/7416
I noticed the problem myself when on Windows isprint('\t') started to
evaluate to true (see https://stackoverflow.com/questions/51435249) and
thus caused several unit tests to fail. The result of isprint doesn't
seem to be well-defined even for ASCII characters. Therefore I suggest
to replace isprint by a platform-independent version.
Differential Revision: https://reviews.llvm.org/D49680
llvm-svn: 338034
Some trivial cases in udivrem were handled by directly assigning 0 or 1
to APInt objects. This would set the bit width to 1, instead of the bit
width of the inputs. A potentially undesirable side effect of that is
that with the bit width of 1, 1 equals -1.
Differential Revision: https://reviews.llvm.org/D49554
llvm-svn: 337478
Spell out destructor, copy/move constructor and assignment operators for
MSVC STL, where set<T>::const_iterator is not trivially copy constructible.
llvm-svn: 337292
This support was partial and temporary. Now that we have
wasm object file support its no longer needed.
Differential Revision: https://reviews.llvm.org/D48744
llvm-svn: 337222
Summary: The lib paths are not correctly picked up for OpenEmbedded sysroots
(like arm-oe-linux-gnueabi). I fix this in a follow-up clang patch. But in
order to add the correct libs I need to detect if the vendor is oe. For this
reason, it is first necessary to teach llvm to detect oe vendor, which is what
this patch does.
Reviewers: chandlerc, compnerd, rengolin, javed.absar
Reviewed By: compnerd
Subscribers: kristof.beyls, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48861
llvm-svn: 336401
supporting move-only closures.
Most of the core optimizations for std::function are here plus
a potentially novel one that detects trivially movable and destroyable
functors and implements those with fewer indirections.
This is especially useful as we start trying to add concurrency
primitives as those often end up with move-only types (futures,
promises, etc) and wanting them to work through lambdas.
As further work, we could add better support for things like const-qualified
operator()s to support more algorithms, and r-value ref qualified operator()s
to model call-once. None of that is here though.
We can also provide our own llvm::function that has some of the optimizations
used in this class, but with copy semantics instead of move semantics.
This is motivated by increasing usage of things like executors and the task
queue where it is useful to embed move-only types like a std::promise within
a type erased function. That isn't possible without this version of a type
erased function.
Differential Revision: https://reviews.llvm.org/D48349
llvm-svn: 336156
Summary:
This allows the implicit ArrayRef conversions to kick in when e.g.
comparing ArrayRef to a SmallVector.
Reviewers: zturner, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48632
llvm-svn: 335839
Summary:
The instantiation of the drop_begin function template usually fails because the functions begin() and end() do not exist. Only when using on a container from the std namespace (or `llvm::iterator_range`s of something derived from `std::iterator`), they are matched to std::begin() and std::end() due to Koenig-lookup.
Explicitly use llvm::adl_begin and llvm::adl_end to make drop_begin applicable to anything iterable (including C-style arrays).
A solution for general `llvm::iterator_range`s was already tried in r244620, but got reverted in r244621 due to MSVC not liking it.
Reviewers: dblaikie, grosbach, aaron.ballman, ruiu
Reviewed By: dblaikie, aaron.ballman
Subscribers: aaron.ballman, llvm-commits
Differential Revision: https://reviews.llvm.org/D48598
llvm-svn: 335772
This patch adds a simple const_iterator implementation for SmallSet by
delegating to either a SmallVector::const_iterator or
std::set::const_iterator, depending on which storage is used by the
SmallSet.
Reviewers: dblaikie, craig.topper
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D47942
llvm-svn: 334887
Tom Stellard