forked from OSchip/llvm-project
636 lines
62 KiB
LLVM
636 lines
62 KiB
LLVM
; NOTE: Assertions have been autogenerated by utils/update_analyze_test_checks.py
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=code-size -mtriple=thumbv8m.base | FileCheck %s --check-prefix=CHECK-T1-SIZE
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=code-size -mtriple=thumbv8m.main | FileCheck %s --check-prefix=CHECK-V8M-SIZE
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=code-size -mtriple=thumbv8.1m.main -mattr=+mve | FileCheck %s --check-prefix=CHECK-MVE-SIZE
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=code-size -mtriple=armv8a -mattr=+neon | FileCheck %s --check-prefix=CHECK-NEON-SIZE
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=latency -mtriple=thumbv8m.base | FileCheck %s --check-prefix=CHECK-T1-LATENCY
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=latency -mtriple=thumbv8m.main | FileCheck %s --check-prefix=CHECK-V8M-LATENCY
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=latency -mtriple=thumbv8.1m.main | FileCheck %s --check-prefix=CHECK-V8_1M-LATENCY
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=throughput -mtriple=thumbv8m.base | FileCheck %s --check-prefix=CHECK-T1-THROUGHPUT
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=throughput -mtriple=thumbv8m.main | FileCheck %s --check-prefix=CHECK-V8M-THROUGHPUT
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=throughput -mtriple=thumbv8.1m.main | FileCheck %s --check-prefix=CHECK-V8_1M-THROUGHPUT
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=throughput -mtriple=thumbv8.1m.main -mattr=+mve | FileCheck %s --check-prefix=CHECK-MVE-THROUGHPUT
|
|
; RUN: opt < %s -cost-model -analyze -cost-kind=throughput -mtriple=armv8a -mattr=+neon | FileCheck %s --check-prefix=CHECK-NEON-THROUGHPUT
|
|
|
|
define i32 @simple_loop_cost(i32 %N) {
|
|
; CHECK-T1-SIZE-LABEL: 'simple_loop_cost'
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8M-SIZE-LABEL: 'simple_loop_cost'
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-MVE-SIZE-LABEL: 'simple_loop_cost'
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-NEON-SIZE-LABEL: 'simple_loop_cost'
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-T1-LATENCY-LABEL: 'simple_loop_cost'
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8M-LATENCY-LABEL: 'simple_loop_cost'
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8_1M-LATENCY-LABEL: 'simple_loop_cost'
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-T1-THROUGHPUT-LABEL: 'simple_loop_cost'
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8M-THROUGHPUT-LABEL: 'simple_loop_cost'
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8_1M-THROUGHPUT-LABEL: 'simple_loop_cost'
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-MVE-THROUGHPUT-LABEL: 'simple_loop_cost'
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br label %loop
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-NEON-THROUGHPUT-LABEL: 'simple_loop_cost'
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br label %loop
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %res
|
|
;
|
|
entry:
|
|
%zero = icmp eq i32 %N, 0
|
|
br i1 %zero, label %exit, label %preheader
|
|
|
|
preheader:
|
|
br label %loop
|
|
|
|
loop:
|
|
%iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
%iv.next = add nuw i32 %iv, 1
|
|
%cmp = icmp ne i32 %iv.next, %N
|
|
br i1 %cmp, label %loop, label %exit
|
|
|
|
exit:
|
|
%res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
ret i32 %res
|
|
}
|
|
|
|
define i32 @simple_mul_loop(i32* %A, i32* %B, i32 %N) {
|
|
; CHECK-T1-SIZE-LABEL: 'simple_mul_loop'
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8M-SIZE-LABEL: 'simple_mul_loop'
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-MVE-SIZE-LABEL: 'simple_mul_loop'
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-NEON-SIZE-LABEL: 'simple_mul_loop'
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-T1-LATENCY-LABEL: 'simple_mul_loop'
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8M-LATENCY-LABEL: 'simple_mul_loop'
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8_1M-LATENCY-LABEL: 'simple_mul_loop'
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-T1-THROUGHPUT-LABEL: 'simple_mul_loop'
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8M-THROUGHPUT-LABEL: 'simple_mul_loop'
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8_1M-THROUGHPUT-LABEL: 'simple_mul_loop'
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-MVE-THROUGHPUT-LABEL: 'simple_mul_loop'
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br label %loop
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-NEON-THROUGHPUT-LABEL: 'simple_mul_loop'
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br label %loop
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i32, i32* %addr.a, align 4
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %load, %load
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %res
|
|
;
|
|
entry:
|
|
%zero = icmp eq i32 %N, 0
|
|
br i1 %zero, label %exit, label %preheader
|
|
|
|
preheader:
|
|
br label %loop
|
|
|
|
loop:
|
|
%iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
%addr.a = getelementptr i32, i32* %A, i32 %iv
|
|
%load = load i32, i32* %addr.a
|
|
%mul = mul i32 %load, %load
|
|
%addr.b = getelementptr i32, i32* %B, i32 %iv
|
|
store i32 %mul, i32* %addr.b
|
|
%iv.next = add nuw i32 %iv, 1
|
|
%cmp = icmp ne i32 %iv.next, %N
|
|
br i1 %cmp, label %loop, label %exit
|
|
|
|
exit:
|
|
%res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
ret i32 %res
|
|
}
|
|
|
|
define i32 @simple_mul_ext_lsr_loop(i16* %A, i32* %B, i32 %N) {
|
|
; CHECK-T1-SIZE-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-T1-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8M-SIZE-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-MVE-SIZE-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-NEON-SIZE-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-T1-LATENCY-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-T1-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8M-LATENCY-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8_1M-LATENCY-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-LATENCY-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-T1-THROUGHPUT-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-T1-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8M-THROUGHPUT-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-V8_1M-THROUGHPUT-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br label %loop
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-V8_1M-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-MVE-THROUGHPUT-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br label %loop
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-MVE-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %res
|
|
;
|
|
; CHECK-NEON-THROUGHPUT-LABEL: 'simple_mul_ext_lsr_loop'
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %zero = icmp eq i32 %N, 0
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %zero, label %exit, label %preheader
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br label %loop
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %load = load i16, i16* %addr.a, align 2
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %sext = sext i16 %load to i32
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %mul = mul i32 %sext, 7
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: store i32 %mul, i32* %addr.b, align 4
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %iv.next = add nuw i32 %iv, 1
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %cmp = icmp ne i32 %iv.next, %N
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: br i1 %cmp, label %loop, label %exit
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
; CHECK-NEON-THROUGHPUT-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %res
|
|
;
|
|
entry:
|
|
%zero = icmp eq i32 %N, 0
|
|
br i1 %zero, label %exit, label %preheader
|
|
|
|
preheader:
|
|
br label %loop
|
|
|
|
loop:
|
|
%iv = phi i32 [ 0, %preheader ], [ %iv.next, %loop ]
|
|
%addr.a = phi i16* [ %A, %preheader ], [ %addr.a, %loop ]
|
|
%addr.b = phi i32* [ %B, %preheader ], [ %addr.b, %loop ]
|
|
%load = load i16, i16* %addr.a
|
|
%sext = sext i16 %load to i32
|
|
%mul = mul i32 %sext, 7
|
|
store i32 %mul, i32* %addr.b
|
|
%iv.next = add nuw i32 %iv, 1
|
|
%addr.a.next = getelementptr i16, i16* %addr.a, i32 1
|
|
%addr.b.next = getelementptr i32, i32* %addr.b, i32 1
|
|
%cmp = icmp ne i32 %iv.next, %N
|
|
br i1 %cmp, label %loop, label %exit
|
|
|
|
exit:
|
|
%res = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
|
|
ret i32 %res
|
|
}
|