This reverts commit 1cfecf4fc4.
This commit broke LLVM code generated through XLA by removing a
conditional on Ld->getExtensionType() == ISD::NON_EXTLOAD
This patch adds support for lowering the saturating vector add/sub
intrinsics to RVV instructions, for both fixed-length and
scalable-vector forms alike.
Note that some of the DAG combines are still not triggering for the
scalable-vector tests. These require a bit more work in the DAGCombiner
itself.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106651
This patch adds the zero instruction for zeroing a list of 64-bit
element ZA tiles. The instruction takes a list of up to eight tiles
ZA0.D-ZA7.D, which must be in order, e.g.
zero {za0.d,za1.d,za2.d,za3.d,za4.d,za5.d,za6.d,za7.d}
zero {za1.d,za3.d,za5.d,za7.d}
The assembler also accepts 32-bit, 16-bit and 8-bit element tiles which
are mapped to corresponding 64-bit element tiles in accordance with the
architecturally defined mapping between different element size tiles,
e.g.
* Zeroing ZA0.B, or the entire array name ZA, is equivalent to zeroing
all eight 64-bit element tiles ZA0.D to ZA7.D.
* Zeroing ZA0.S is equivalent to zeroing ZA0.D and ZA4.D.
The preferred disassembly of this instruction uses the shortest list of
tile names that represent the encoded immediate mask, e.g.
* An immediate which encodes 64-bit element tiles ZA0.D, ZA1.D, ZA4.D and
ZA5.D is disassembled as {ZA0.S, ZA1.S}.
* An immediate which encodes 64-bit element tiles ZA0.D, ZA2.D, ZA4.D and
ZA6.D is disassembled as {ZA0.H}.
* An all-ones immediate is disassembled as {ZA}.
* An all-zeros immediate is disassembled as an empty list {}.
This patch adds the MatrixTileList asm operand and related parsing to support
this.
Depends on D105570.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105575
This implements the isLoadFromStackSlot and isStoreToStackSlot for MVE
MVE_VSTRWU32 and MVE_VLDRWU32 functions. They behave the same as many
other loads/stores, expecting a FI in Op1 and zero offset in Op2. At the
same time this alters VLDR_P0_off and VSTR_P0_off to use the same code
too, as they too should be returning VPR in Op0, take a FI in Op1 and
zero offset in Op2.
Differential Revision: https://reviews.llvm.org/D106797
Enable custom insert_subvector for larger vector types.
This is necessary now that SelectionDAG can attempt v3f64 insert
to v4f64, etc.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D105385
All floating point values in registers are in double precision
representation. In order to materialize the correct single precision
value, we need to convert the APFloat that represents the value
to double precision first.
Reviewed By: amyk, NeHuang
Differential Revision: https://reviews.llvm.org/D106812
Before MASSV only supported P8 and P9 on AIX ans Linux . This patch proposes
MASSV to add support of P7 and P10 only on AIX too.
Differential: https://reviews.llvm.org/D106678
Use it AArch64 post-legal combiner. These don't always get folded because when
the instructions are created the constants are obscured by artifacts.
Differential Revision: https://reviews.llvm.org/D106776
When Emscripten EH mixes with Emscripten SjLj, we are not currently
handling some of them correctly. There are three cases:
1. The current function calls `setjmp` and there is an `invoke` to a
function that can either throw or longjmp. In this case, we have to
check both for exception and longjmp. We are currently handling this
case correctly:
0c0eb76782/llvm/lib/Target/WebAssembly/WebAssemblyLowerEmscriptenEHSjLj.cpp (L1058-L1090)
When inserting routines for functions that can longjmp, which we do
only for setjmp-calling functions, we check if the function was
previously an `invoke` and handle it correctly.
2. The current function does NOT call `setjmp` and there is an `invoke`
to a function that can either throw or longjmp. Because there is no
`setjmp` call, we haven't been doing any check for functions that can
longjmp. But in that case, for `invoke`, we only check for an
exception and if it is not an exception we reset `__THREW__` to 0,
which can silently swallow the longjmp:
0c0eb76782/llvm/lib/Target/WebAssembly/WebAssemblyLowerEmscriptenEHSjLj.cpp (L70-L80)
This CL fixes this.
3. The current function calls `setjmp` and there is no `invoke`. Because
it is not an `invoke`, we haven't been doing any check for functions
that can throw, and only insert longjmp-checking routines for
functions that can longjmp. But in that case, if a longjmpable
function throws, we only check for a longjmp so if it is not a
longjmp we reset `__THREW__` to 0, which can silently swallow the
exception:
0c0eb76782/llvm/lib/Target/WebAssembly/WebAssemblyLowerEmscriptenEHSjLj.cpp (L156-L169)
This CL fixes this.
To do that, this moves around some code, so we register necessary
functions for both EH and SjLj and precompute some data (the set of
functions that contains `setjmp`) before doing actual EH or SjLj
transformation.
This CL makes 2nd and 3rd tests in
https://github.com/emscripten-core/emscripten/pull/14732 work.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D106525
Add td definitions and asm/disasm tests for the addex instruction introduced in
ISA 3.0.
Reviewed By: nemanjai, amyk, NeHuang
Differential Revision: https://reviews.llvm.org/D106666
This is a followup patch for D105930 to add implicit-def of RM for
mtfsb[01] instructions as per review comments.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D106603
The legalizer generates selects for some operations, which can have constant
condition values, resulting in lots of dead code if it's not folded away.
Differential Revision: https://reviews.llvm.org/D106762
Both `__THREW__` and `__threwValue` are global variables, and we have
been distinguishing the global variable `__THREW__` and the loaded value
`%__THREW__.val` in comments but not doing it for `__threwValue`. Made
the pseudocode comments consistent for both variables.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D106524
For reg+imm SVE addressing mode imm is implictly scaled by VL,
making them impractical for truely immediate offsets. However, if
the offset can be unscaled based on the storage element type we
can use the reg+reg SVE addressing mode and thus either reduce the
number of generate add instructions or replace them with a mov
instruction that can be hoisted from the hot code path.
Differential Revision: https://reviews.llvm.org/D106744
This patch adds support for the next-generation arch14
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Detection of arch14 as host processor.
- Assembler/disassembler support for new instructions.
- New LLVM intrinsics for certain new instructions.
- Support for low-level builtins mapped to new LLVM intrinsics.
- New high-level intrinsics in vecintrin.h.
- Indicate support by defining __VEC__ == 10304.
Note: No currently available Z system supports the arch14
architecture. Once new systems become available, the
official system name will be added as supported -march name.
Codegen for the raw/struct buffer access intrinsics would update the
offset in the MMO to reflect the combined offset, if it was known to be
constant. If the combined offset was not known to be constant, or if
there was an index, it would set the offset in the MMO to 0. This is
unsafe because it makes it look like the access does not alias with
another access with a fixed non-zero offset.
Fix these cases by setting the pointer in the MMO to null, to reflect
the fact that we do not have any known IR value pointer + constant
offset for the access.
D106284 did this for SelectionDAG. This is the corresponding fix for
GlobalISel.
Differential Revision: https://reviews.llvm.org/D106451
Codegen for the raw/struct buffer access intrinsics would update the
offset in the MMO to reflect the combined offset, if it was known to be
constant. If the combined offset was not known to be constant, or if
there was an index, it would set the offset in the MMO to 0. This is
unsafe because it makes it look like the access does not alias with
another access with a fixed non-zero offset.
Fix these cases by setting the pointer in the MMO to null, to reflect
the fact that we do not have any known IR value pointer + constant
offset for the access.
Differential Revision: https://reviews.llvm.org/D106284
The register class required for some MVE loads/stores is more
constrained than the register we use when creating postinc. Make sure we
constrain the register class to keep the code correct.
The pattern for vector_splice with Index equal or bigger than
zero was misplaced in the AddedComplexity = 1 pattern in the AArch64
tablegen file. This patch fixes it by removing vector_splice pattern
from inside AddedComplexity = 1.
This patch implements vector_splice in tablegen for all cases when the
Immediate is positive and lower than the known minimum value of
a scalable vector.
Vector_splice can be implemented using SVE instruction EXT.
For instance :
@llvm.experimental.vector.splice(Vector_1, Vector_2, Imm)
@llvm.experimental.vector.splice(<A,B,C,D>, <E,F,G,H>, 1) ==> <B, C, D, E>
EXT Vector_1, Vector_2, Imm // Vector_1 = B, C, D + Vector_2 = E
Depends on D105633
Differential Revision: https://reviews.llvm.org/D106273
This patch implements vector_splice in tablegen for:
a) when the immediate is equal to -1 (Imm==1) and uses:
INSR + LASTB
For instance :
@llvm.experimental.vector.splice(Vector_1, Vector_2, -1)
@llvm.experimental.vector.splice(<A,B,C,D>, <E,F,G,H>, 1) ==> <D, E, F, G>
LAST RegLast, Vector_1 // RegLast = D
INSR Res, (Vector_1 >> 1), RegLast // Res = D + E, F, G
Differential Revision: https://reviews.llvm.org/D105633
I have added a new FastMathFlags parameter to getArithmeticReductionCost
to indicate what type of reduction we are performing:
1. Tree-wise. This is the typical fast-math reduction that involves
continually splitting a vector up into halves and adding each
half together until we get a scalar result. This is the default
behaviour for integers, whereas for floating point we only do this
if reassociation is allowed.
2. Ordered. This now allows us to estimate the cost of performing
a strict vector reduction by treating it as a series of scalar
operations in lane order. This is the case when FP reassociation
is not permitted. For scalable vectors this is more difficult
because at compile time we do not know how many lanes there are,
and so we use the worst case maximum vscale value.
I have also fixed getTypeBasedIntrinsicInstrCost to pass in the
FastMathFlags, which meant fixing up some X86 tests where we always
assumed the vector.reduce.fadd/mul intrinsics were 'fast'.
New tests have been added here:
Analysis/CostModel/AArch64/reduce-fadd.ll
Analysis/CostModel/AArch64/sve-intrinsics.ll
Transforms/LoopVectorize/AArch64/strict-fadd-cost.ll
Transforms/LoopVectorize/AArch64/sve-strict-fadd-cost.ll
Differential Revision: https://reviews.llvm.org/D105432
Begin replacing individual getMemIntrinsicNode calls and setup (for X86ISD::VBROADCAST_LOAD + X86ISD::SUBV_BROADCAST_LOAD opcodes) with this getBROADCAST_LOAD helper.
If the rotation amount is a known splat, perform the modulo on the splat source, and then perform the splat. That way the amount-extension performed later by LowerScalarVariableShift can fold the splats away without any multiple-use issues.
Fixes one of the concerns raised on D104156
This is a minimum extension of D106607 to allow folding for
2 non-zero constantsi that can be materialized as immediates..
In the reduced test examples, we save 1 instruction by rolling
the constants into LEA/ADD. In the motivating test from the bullet
benchmark, we absorb both of the constant moves into add ops via
LEA magic, so we reduce by 2 instructions.
Differential Revision: https://reviews.llvm.org/D106684
As noticed on D105390 - we were hardwiring the depth limit for combining to VPERMI2W/VPERMI2B instructions. Not only had we made the limit too low, we hadn't accounted for slow/fast shuffles via the VariableCrossLaneShuffleDepth control
For types like s96, we don't want to clamp to s64, we want to first widen to
s128 and then narrow it. Otherwise we end up with impossible to legalize types.
I stumbled onto a case where our (sext_inreg (assertzexti32 (fptoui X)), i32)
isel pattern can cause an fcvt.wu and fcvt.lu to be emitted if
the assertzexti32 has an additional user. If we add a one use check
it would just cause a fcvt.lu followed by a sext.w when only need
a fcvt.wu to satisfy both users.
To mitigate this I've added custom isel and new ISD opcodes for
fcvt.wu. This allows us to keep know it started life as a conversion
to i32 without needing to match multiple nodes. ComputeNumSignBits
has been taught that this new nodes produces 33 sign bits. To
prevent regressions when we need to zero extend the result of an
(i32 (fptoui X)), I've added a DAG combine to convert it to an
(i64 (fptoui X)) before type legalization. In most cases this would
happen in InstCombine, but a zero_extend can be created for function
returns or arguments.
To keep everything consistent I've added new nodes for fptosi as well.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D106346
Most other registers are allocatable and therefore cannot be used.
This issue was flagged by the machine verifier, because reading other
registers is considered reading from an undefined register.
Differential Revision: https://reviews.llvm.org/D96969
This patch fixes some issues with the RORB pseudo instruction.
- A minor issue in which the instructions were said to use the SREG,
which is not true.
- An issue with the BLD instruction, which did not have an output operand.
- A major issue in which invalid instructions were generated. The fix
also reduce RORB from 4 to 3 instructions, so it's also a small
optimization.
These issues were flagged by the machine verifier.
Differential Revision: https://reviews.llvm.org/D96957
This patch makes sure shift instructions such as this one:
%result = shl i32 %n, %amount
are expanded just before the IR to SelectionDAG conversion to a loop so
that calls to non-existing library functions such as __ashlsi3 are
avoided. The generated code is currently pretty bad but there's a lot of
room for improvement: the shift itself can be done in just four
instructions.
Differential Revision: https://reviews.llvm.org/D96677
There were some serious issues with atomic operations. This patch should
fix the biggest issues.
For details on the issue take a look at this Compiler Explorer sample:
https://godbolt.org/z/n3ndhn
Code:
void atomicadd(_Atomic char *val) {
*val += 5;
}
Output:
atomicadd:
movw r26, r24
ldi r24, 5 ; 'operand' register
in r0, 63
cli
ld r24, X ; load value
add r24, r26 ; value += X
st X, r24 ; store value back
out 63, r0
ret ; return the wrong value (in r24)
There are various problems with this.
- The value to add (5) is stored in r24. However, the value to add to
is loaded in the same register: r24.
- The `add` instruction adds half of the pointer to the loaded value,
instead of (attempting to) add the operand with value 5.
- The output value of the cmpxchg instruction (which is not used in
this code sample) is the new value with 5 added, not the old value.
The LangRef specifies that it has to be the old value, before the
operation.
This patch fixes the first two and leaves the third problem to be fixed
at a later date. I believe atomics were mostly broken before this patch,
with this patch they should become usable as long as you ignore the
output of the atomic operation. In particular it fixes the following
things:
- It sets the earlyclobber flag for the input ('$operand' operand) so
that the register allocator puts it in a different register than the
output value.
- It fixes a number of issues with the pseudo op expansion pass, for
example now it adds the $operand field instead of the pointer. This
fixes most machine instruction verifier issues (other flagged issues
are unrelated to atomics).
Differential Revision: https://reviews.llvm.org/D97127
In most cases, using R31R30 is fine because the call (which always
precedes ADJCALLSTACKDOWN) will clobber R31R30 anyway. However, in some
rare cases the register allocator might insert an instruction between
the call and the ADJCALLSTACKDOWN instruction and expect the register
pair to be live afterwards. I think this happens as a result of
rematerialization. Therefore, to fix this, the instruction needs to have
Defs set to R31R30.
Setting the Defs field does have the effect of making the instruction
look dead, which it certainly is not. This is fixed by setting
hasSideEffects to true.
Differential Revision: https://reviews.llvm.org/D97745
Previously, AVRTargetLowering::LowerCall attempted to keep stack stores
in order with chains. Perhaps this worked in the past, but it does not
work now: it appears that the SelectionDAG legalization phase removes
these chains. Therefore, I've removed these chains entirely to match
X86 (which, similar to AVR, also prefers to use push instructions over
stack-relative stores to set up a call frame). With this change, all the
stack stores are in a somewhat reasonable order.
Differential Revision: https://reviews.llvm.org/D97853
This patch introduces a pass that uses the Attributor to deduce AMDGPU specific attributes.
Reviewed By: jdoerfert, arsenm
Differential Revision: https://reviews.llvm.org/D104997
Replace the clang builtins and LLVM intrinsics for {f32x4,f64x2}.{pmin,pmax}
with standard codegen patterns. Since wasm_simd128.h uses an integer vector as
the standard single vector type, the IR for the pmin and pmax intrinsic
functions contains bitcasts that would not be there otherwise. Add extra codegen
patterns that can still select the pmin and pmax instructions in the presence of
these bitcasts.
Differential Revision: https://reviews.llvm.org/D106612
Since we're changing VTYPE, we may change VLMAX which could
invalidate the previous VL. If we can't tell if it is safe we
should use an AVL of 1 instead of keeping the old VL.
This is a quick fix. We may want to thread VL to the pseudo
instruction instead of making up a value. That will require ISD
opcode changes and changes to the C intrinsic interface.
This fixes the issue raised in D106286.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D106403
This code tries to form a TEST from CMP+AND with an optional
truncate in between. If we looked through the truncate, we may
have extra bits in the AND mask that shouldn't participate in
the checks. Normally SimplifyDemendedBits takes care of this, but
the AND may have another user. So manually mask out any extra bits.
Fixes PR51175.
Differential Revision: https://reviews.llvm.org/D106634
This is not the transform direction we want in general,
but by the time we have a CMOV, we've already tried
everything else that could be better.
The transform increases the uses of the other add operand,
but that is safe according to Alive2:
https://alive2.llvm.org/ce/z/Yn6p-A
We could probably extend this to other binops (not just add).
This is the motivating pattern discussed in:
https://llvm.org/PR51069
The test with i8 shows a missed fold because there's a trunc
sitting in front of the add. That can be handled with a small
follow-up.
Differential Revision: https://reviews.llvm.org/D106607
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
This adds some missing single source shuffle costs for AArch64, of i16
and i8 vectors. v4i16 are the same as v4i32 with a worse case cost of 3
coming from the perfect shuffle tables. The larger vector sizes expand
into a constant pool, plus a load (and adrp) and a tbl. I arbitrarily
chose 8 for the cost to be expensive but not too expensive.
Differential Revision: https://reviews.llvm.org/D106241
Clear the map when running the analysis multiple times.
The assertion that should ensure that every function is only
analyzed once triggered sometimes (once every ~70 compiles of some
graphics pipelines) when two functions of subsequent runs were allocated
at the same address.
Differential Revision: https://reviews.llvm.org/D106452
Add maximum NSA size limit as an ISA feature.
Use this to reduce NSA usage on GFX10.1 to avoid stability issues
with 4 and 5 dwords NSA instructions.
Maintain use of longer NSA instructions on GFX10.3.
Note: this also contains some minor fixes for GlobalISel which
did not work correctly with non-NSA form instructions on GFX10.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103348
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D104797
Update shl/lshr/ashr costs based on the worst case costs from the script in D103695 - many of the 128-bit shifts (usually where integer multiplies aren't used) have similar behaviour to AVX1 so we can merge them.
Noticed while trying to clean up the shift costs model for SSE4 targets using the script in D10369 - SLM double-pumps all the 128-bit vector conversion ops and only use FP0 pipe - numbers taken from Intel AOM + Agner.
This changes the cost to (LT.first-1) * cost(add) + 2, where the cost of
an add is assumed to be 1. This brings it inline with the other
reductions.
Differential Revision: https://reviews.llvm.org/D106240
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch adds the builtin and intrinsic for "__stbcx".
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D106484
Lowering certain float vectors without legal vector types could cause a
crash due to a bad interaction between passing floats via GPRs and
argument splitting. Split vector floats appear just like scalar floats.
Under certain situations we choose to pass these float arguments via
GPRs and use an XLenVT location and set the 'BCvt' info to track how
they must be converted back to floating-point values. However, later
logic for handling split arguments may take over, in which case we lose
the previous information and set the 'Indirect' info, thus incorrectly
lowering to integer types.
I don't believe that we would have come across the notion of split
floating-point arguments before. This patch addresses the issue by
updating the lowering so that split arguments are only passed indirectly
when they are scalar integer types.
This has some change to how we lower some larger illegal float vectors,
as can be seen in 'fastcc-float.ll' where the vector is now passed
partly in registers and partly on the stack.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D102852
This relands a6ca88e908 which was originally
reverted due to overflow bugs in e3fa2b1eab.
This patch teaches the compiler to identify a wider variety of
`BUILD_VECTOR`s which form integer arithmetic sequences, and to lower
them to `vid.v` with modifications for non-unit steps and non-zero
addends.
The sequences handled by this optimization must either be monotonically
increasing or decreasing. Consecutive elements holding the same value
indicate a fractional step which, while simple mathematically,
becomes more complex to handle both in the realm of lossy integer
division and in the presence of `undef`s.
For example, a common "interleaving" shuffle index will be lowered by
LLVM to both `<0,u,1,u,2,...>` and `<u,0,u,1,u,...>` `BUILD_VECTOR`
nodes. Either of these would ideally be lowered to `vid.v` shifted right
by 1. Detection of this sequence in presence of general `undef` values
is more complicated, however: `<0,u,u,1,>` could match either
`<0,0,0,1,>` or `<0,0,1,1,>` depending on later values in the sequence.
Both are possible, so backtracking or multiple passes is inevitable.
Sticking to monotonic sequences keeps the logic simpler as it can be
done in one pass. Fractional steps will likely be a separate
optimization in a future patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104921
Allow MIMG instructions to be selected with 6/7 VGPRs for vaddr.
Previously these were rounded up to VReg_256 this saves VGPRs.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103800
Disable null export (for kills) when a frontend defines a pixel
shader as not exporting using amdgpu-color-export and
amdgpu-depth-export function attrbutes.
This allows the generation of export free pixel shaders.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D105683
This is SCC pass, moving it to the end of SCC PM saves one
Function PM. This needs the analysis to take into account
memory access width since it is now places after the
load/store optimizer (D105651).
Differential Revision: https://reviews.llvm.org/D105652
These had
```
.clampScalar(0, s1, 64)
.widenScalarToNextPow2(0, 8)
```
If you have s2 or s4, then `widenScalarToNextPow2` does nothing.
This changes the `widenScalarToNextPow2` rule to use s8 as the minimum type
instead, allowing us to correctly widen s2 and s4.
This does not impact s1, since it's marked as legal already.
Differential Revision: https://reviews.llvm.org/D106413
A function with less memory instructions but wider access
is the same as a function with more but narrower accesses
in terms of memory boundness. In fact the pass would give
different answers before and after vectorization without
this change.
Differential Revision: https://reviews.llvm.org/D105651
The existing rule about the operand type is strange. Instead, just say
the operand is a TargetConstant with the right width. (Legalization
ignores TargetConstants, so it doesn't matter if that width is legal.)
Highlights:
1. I had to substantially rewrite the AArch64 isel patterns to expect a
TargetConstant. Nothing too exotic, but maybe a little hairy. Maybe
worth considering a target-specific node with some dagcombines instead
of this complicated nest of isel patterns.
2. Our behavior on RV32 for vectors of i64 has changed slightly. In
particular, we correctly preserve the width of the arithmetic through
legalization. This changes the DAG a bit. Maybe room for
improvement here.
3. I explicitly defined the behavior around overflow. This is necessary
to make the DAGCombine transforms legal, and I don't think it causes any
practical issues.
Differential Revision: https://reviews.llvm.org/D105673
Replace the experimental clang builtins and LLVM intrinsics for these
instructions with normal instruction selection patterns. The wasm_simd128.h
intrinsics header was already using portable code for the corresponding
intrinsics, so now it produces the correct instructions.
Differential Revision: https://reviews.llvm.org/D106400
ML64.EXE applies implicit RIP-relative addressing only to memory references that include a named-variable reference.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D105372
This patch is in a series of patches to provide
builtins for compatibility with the XL compiler.
This patch adds builtins related to floating point
operations
Reviewed By: #powerpc, nemanjai, amyk, NeHuang
Differential Revision: https://reviews.llvm.org/D103986
The killed flag is not always set. E.g. when a variable is used in a
loop, it is never marked as killed, although it is unused in following
basic blocks. Also, we try to deprecate kill flags and not use them.
Check if the register is live in the endif block. If not, consider it
killed in the then and else blocks.
The vgpr-liverange tests have two new tests with loops
(pre-committed, so the diff is visible).
I also needed to change the subtarget to gfx10.1, otherwise calls
are not working.
Differential Revision: https://reviews.llvm.org/D106291
Rename getBufferOffsetForMMO to updateBufferMMO and pass in the MMO to
be updated, in preparation for the bug fix in D106284.
Call updateBufferMMO consistently for all buffer intrinsics, even the
ones that use setBufferOffsets to decompose a combined offset
expression.
Add a getIdxEn helper function.
Differential Revision: https://reviews.llvm.org/D106354
In mandatory tail calling conventions we might have to deallocate stack
space used by our arguments before return. This happens after popping
CSRs, so the pop cannot be turned into the return itself in this case.
The else branch here was already a nop, so removing it as a tidy-up.
We have SelectionDAG patterns for 8 & 16-bit atomic operations, but they
assume the value types will have been legalized to 32-bits. So this adds
the ability to widen them to both AArch64 & generic GISel
infrastructure.
This patch adds the mova instruction to insert/extract an SVE vector
register to/from a ZA tile vector.
The preferred MOV aliases are also implemented.
Depends on D105572.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: david-arm, CarolineConcatto
Differential Revision: https://reviews.llvm.org/D105574
If a CMOV is in a loop and is converted to branches, CMOV conversion wouldn't
add newly created basic blocks to loop info. Since the candidates is collected
based on loops, instructions in these basic blocks will be ignored.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D104623
Implemented builtins for mtmsr, mfspr, mtspr on PowerPC;
the patch is intended for XL Compatibility.
Differential revision: https://reviews.llvm.org/D106130
This patch implements store, load, move from and to registers related
builtins, as well as the builtin for stfiw. The patch aims to provide
feature parady with xlC on AIX.
Differential revision: https://reviews.llvm.org/D105946
Add manual selection code similar to the code in AArch64ISelDAGToDAG, and add
`createTuple` helpers similar to the code there as well.
This accounted for around 111 fallbacks while building clang for AArch64 with
GlobalISel.
This also should make it easy to add selection code for other store
intrinsics.
As a minor cleanup, this uses `createQTuple` in the other place where we use
REG_SEQUENCE.
Differential Revision: https://reviews.llvm.org/D106332
Basically two parts to this fix:
1. Stop using AtomicExpand to expand cmpxchg i128
2. Fix AArch64ExpandPseudoInsts to use a correct expansion.
From ARM architecture reference:
To atomically load two 64-bit quantities, perform a Load-Exclusive
pair/Store-Exclusive pair sequence of reading and writing the same value
for which the Store-Exclusive pair succeeds, and use the read values
from the Load-Exclusive pair.
Fixes https://bugs.llvm.org/show_bug.cgi?id=51102
Differential Revision: https://reviews.llvm.org/D106039
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch add the builtin and emit target independent
code for __cmpb.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D105194
If we need to shift left anyway we might be able to take advantage
of LUI implicitly shifting its immediate left by 12 to cover part
of the shift. This allows us to use more bits of the LUI immediate
to avoid an ADDI.
isDesirableToCommuteWithShift now considers compressed instruction
opportunities when deciding if commuting should be allowed.
I believe this is the same or similar to one of the optimizations
from D79492.
Reviewed By: luismarques, arcbbb
Differential Revision: https://reviews.llvm.org/D105417
Replace some existing isel patterns that are covered by the new
code. SLLIUWPat has been removed in favor of folding its root case
into the new code. The other uses in isel patterns for shXadd.uw
have been switched to using hardcoded AND masks.
This is based on the original version of D49585 from ARM. The final
version of that was made a DAG combine, but I've chosen to keep it
as custom isel. I'm not convinced DAG combine is as good with
shift pairs as it is with and+shift. I saw some issues optimizing
the shifts created by vscale lowering if an and isn't created for
from a shift pair.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D106230
ACC registers are a combination of four consecutive vector registers.
If the vector registers are assigned first this often forces a number
of copies to appear just before the ACC register is created. If the ACC
register is assigned first then fewer copies are generated when the vector
registers are assigned.
This patch tries to force the register allocator to assign the ACC registers first
and then the UACC registers and then the vector pair registers. It does this
by changing the priority of the register classes.
This patch also adds hints to help the register allocator assign UACC registers from
known ACC registers and vector pair registers from known UACC registers.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D105854
I don't think the semantics of the llvm masked gather intrinsic care
about the order the elements are loaded. For example, type legalization
by splitting will chain them in parallel. This is different than
scatter which we do chain in order.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D106025
We were using auto instead of auto* in a number of places which failed the llvm-qualified-auto check.
Additionally we were using auto in some places where the type wasn't immediately obvious - the style guide rule of thumb is only to use auto from casts etc. where the type is already explicitly stated.
First, collect the register usage in each function, then apply the
maximum register usage of all functions to functions with indirect
calls.
This is more accurate than guessing the maximum register usage without
looking at the actual usage.
As before, assume that indirect calls will hit a function in the
current module.
Differential Revision: https://reviews.llvm.org/D105839
This patch adds the new system registers introduced in SME:
- ID_AA64SMFR0_EL1 (ro) SME feature identifier.
- SMCR_ELx (r/w) streaming mode control register for configuring
effective SVE Streaming SVE Vector length when the PE is in
Streaming SVE mode.
- SVCR (r/w) streaming vector control register, visible at all
exception levels. Provides access to PSTATE.SM and PSTATE.ZA
using MSR and MRS instructions.
- SMPRI_EL1 (r/w) streaming mode execution priority register.
- SMPRIMAP_EL2 (r/w) streaming mode priority mapping register.
- SMIDR_EL1 (ro) streaming mode identification register.
- TPIDR2_EL0 (r/w) for use by SME software to manage per-thread
SME context.
- MPAMSM_EL1 (r/w) MPAM (v8.4) streaming mode register, for
labelling memory accesses performed in streaming mode.
Also added in this patch are the SME mode change instructions.
Three MSR immediate instructions are implemented to set or clear
PSTATE.SM, PSTATE.ZA, or both respectively:
- MSR SVCRSM, #<imm1>
- MSR SVCRZA, #<imm1>
- MSR SVCRSMZA, #<imm1>
The following smstart/smstop aliases are also implemented for
convenience:
smstart -> MSR SVCRSMZA, #1
smstart sm -> MSR SVCRSM, #1
smstart za -> MSR SVCRZA, #1
smstop -> MSR SVCRSMZA, #0
smstop sm -> MSR SVCRSM, #0
smstop za -> MSR SVCRZA, #0
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105576
Debug info sections need R_WASM_FUNCTION_OFFSET_I32 relocs (with FK_Data_4 fixup
kinds) to refer to functions (instead of R_WASM_TABLE_INDEX as is used in data
sections). Usually this is done in a convoluted way, with unnamed temp data
symbols which target the start of the function, in which case
WasmObjectWriter::recordRelocation converts it to use the section symbol
instead. However in some cases the function can actually be undefined; in this
case the dwarf generator uses the function symbol (a named undefined function
symbol) instead. In that case the section-symbol transform doesn't work and we
need to generate the correct reloc type a different way. In this change
WebAssemblyWasmObjectWriter::getRelocType takes the fixup section type into
account to choose the correct reloc type.
Fixes PR50408
Differential Revision: https://reviews.llvm.org/D103557
RISCV would prefer a sign extended constant since that works better
with our constant materialization. We have an existing TLI hook we
use to control sign extension of setcc operands in type legalization.
That hook happens to do the right check we need here, but might be
straying from its original purpose. With only RISCV defining this
hook in tree, I wasn't sure if it was worth adding another hook
with identical behavior.
This is an alternative to D105785 where I tried to handle this in
the RISCV backend by not creating ANY_EXTENDs in some places.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D105918
This removes the promotion of NEON AND, OR and XOR nodes to v2i32/v4i32,
treating them the same as the AArch64 and MVE backends where we just add
the relevant patterns for each legal type. This prevents a lot of
bitcasts from being added to the DAG, which have the potential to make
optimizations more difficult. It does mean adding extra patterns, and
some codegen can change due to the types now being legal, not promoted.
Differential Revision: https://reviews.llvm.org/D105588
Avoid a crash when using instruction referencing if x87 floating point
instructions are used. These instructions are significantly mutated when
they're rewritten from referring to registers, to referring to
floating-point-stack positions. As a result, their operands are re-ordered,
and (InstrRef) LiveDebugValues asserts when it sees a DBG_INSTR_REF
referring to a non-reg non-def register operand.
To fix this, drop the instruction numbers, and thus variable locations.
This patch adds a helper utility do do that.
Dropping the variable locations is sub-optimal, but applying DBG_VALUEs to
the $fp0 and similar registers is dropped on emission too. It seems we've
never done well at describing variables that live in x87 registers, at all.
Differential Revision: https://reviews.llvm.org/D105657
VE's linker, /opt/nec/ve/bin/nld, doesn't implement relative lookup table.
The relative lookup table is introduced by https://reviews.llvm.org/D94355,
but we need to disable it at the moment.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D106224
This relaxes the VMLAV and VADDV reduction recognition code to handle
smaller than legal types, extending them as needed. That was already
handled for some reductions, this extends it to more types in a more
generic way. If a smaller than legal value is found it is extended to
the legal type as needed.
Differential Revision: https://reviews.llvm.org/D106051
The case for nxv2f32/nxv2i32 was already covered by D104573.
This patch builds on top of that by making the mechanism work for
nxv2[b]f16/nxv2i16, nxv4[b]f16/nxv4i16 as well.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D106138
This reverts commit 2a419a0b99.
The result of a shufflevector must not propagate poison from any element
other than the one noted in the shuffle mask.
The regressions outside of fptoui-may-overflow.ll can probably be
recovered some other way; for example, using isGuaranteedNotToBePoison.
See discussion on https://reviews.llvm.org/D106053 for more background.
Differential Revision: https://reviews.llvm.org/D106222
D106053 exposed that we've not been taking into account that by bitcasting smaller elements together and then performing a ComputeKnownBits on the result we'd be allowing a poison element to influence other neighbouring elements being used in the pack. Instead we now peek through any existing bitcast to ensure that the source type already matches the width source of the pack node we're trying to match.
This has also been a chance to stop matchShuffleWithPACK creating unused nodes on the fly which could affect oneuse tests during shuffle lowering/combining.
The only regression we're seeing is due to being unable to peek through a bitcast as its on the other side of a extract_subvector - which should go away once we finally allow shuffle combining across different vector widths (by making matchShuffleWithPACK using const SelectionDAG& we've gotten closer to this - see PR45974).
Corollary to 1113e06821 this allows us to
match gather that dont produce a full vector width results. They use an
extended gather which is truncated back to the original type.
Rewrite patterns to assume that the operand of STEP_VECTOR is a
constant. The old patterns will stop working when the operand is changed
from a Constant to a TargetConstant. (See D105673.)
Add test coverage for certain patterns that weren't exercised by
existing regression tests.
Differential Revision: https://reviews.llvm.org/D105847
Remove uses of to-be-deprecated API. In cases where the correct
element type was not immediately obvious to me, fall back to
explicit getPointerElementType().
Remove uses of to-be-deprecated API. I've fallen back to calling
getPointerElementType() in some cases where the correct type wasn't
immediately obvious to me.
Use the elementtype attribute introduced in D105407 for the
llvm.preserve.array/struct.index intrinsics. It carries the
element type of the GEP these intrinsics effectively encode.
This patch:
* Adds a verifier check that the attribute is required.
* Adds it in the IRBuilder methods for these intrinsics.
* Autoupgrades old bitcode without the attribute.
* Updates the lowering code to use the attribute rather than
the pointer element type.
* Updates lots of tests to specify the attribute.
* Adds -force-opaque-pointers to the intrinsic-array.ll test
to demonstrate they work now.
https://reviews.llvm.org/D106184
We assume VLENB is a multiple of 8 and previously relied on shift
pairs being optimized to an AND+SHL/SHR and computeKnownBits
removing the AND. This doesn't happen if (vlenb >> 3) gets CSEd
to have multiple uses. This patch manually emits the best shift
to workaround this.
This provides intrinsics for emitting instructions that set the FPSCR (`mtfsf/mtfsfi`).
The patch also conservatively marks the rounding mode as an implicit def for both since they both may set the rounding mode depending on the operands.
Reviewed By: #powerpc, qiucf
Differential Revision: https://reviews.llvm.org/D105957
Fixes issue reported on D105827 where a single shuffle of a constant (with multiple uses) was caught in an infinite loop where one shuffle (UNPCKL) used an undef arg but then that got recombined to SHUFPS as the constant value had its own undef that confused matching.....
Implement a subset of builtins required for compatiblilty with AIX XL compiler.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D105930
This adds new pseudoinstructions with ForceTailAgnostic set. This
matches what we did for non-widening VMACC. We should move to a
tail policy operand on the pseudos when we expand the intrinsic
interface to include the tail policy.
This patch transforms the sequence
lea (reg1, reg2), reg3
sub reg3, reg4
to two sub instructions
sub reg1, reg4
sub reg2, reg4
Similar optimization can also be applied to LEA/ADD sequence.
The modifications to TwoAddressInstructionPass is to ensure the operands of ADD
instruction has expected order (the dest register of LEA should be src register
of ADD).
Differential Revision: https://reviews.llvm.org/D104684
If the upper 32 bits are zero and bit 31 is set, we might be able to
use zext.w to fill in the zeros after using an lui and/or addi.
Most of this patch is plumbing the subtarget features into the constant
materialization.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D105509
This patch includes the following updates to the load/store refactoring effort introduced in D93370:
- Update various VSX patterns that use to "force" an XForm, to instead just XForm.
This allows the ability for the patterns to compute the most optimal addressing
mode (and to produce a DForm instruction when possible)
- Update pattern and test case for the LXVD2X/STXVD2X intrinsics
- Update LIT test cases that use to use the XForm instruction to use the DForm instruction
Differential Revision: https://reviews.llvm.org/D95115
This avoids relying on G_EXTRACT on unusual types, and also properly
decomposes structs into multiple registers. This also preserves the
LLTs in the memory operands.
Specifying the latencies of specific LDP variants appears to improve
performance almost universally.
Differential Revision: https://reviews.llvm.org/D105882
This patch adds support for following contiguous load and store
instructions:
* LD1B, LD1H, LD1W, LD1D, LD1Q
* ST1B, ST1H, ST1W, ST1D, ST1Q
A new register class and operand is added for the 32-bit vector select
register W12-W15. The differences in the following tests which have been
re-generated are caused by the introduction of this register class:
* llvm/test/CodeGen/AArch64/GlobalISel/irtranslator-inline-asm.ll
* llvm/test/CodeGen/AArch64/GlobalISel/regbank-inlineasm.mir
* llvm/test/CodeGen/AArch64/stp-opt-with-renaming-reserved-regs.mir
* llvm/test/CodeGen/AArch64/stp-opt-with-renaming.mir
D88663 attempts to resolve the issue with the store pair test
differences in the AArch64 load/store optimizer.
The GlobalISel differences are caused by changes in the enum values of
register classes, tests have been updated with the new values.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D105572
This patch teaches the compiler to identify a wider variety of
`BUILD_VECTOR`s which form integer arithmetic sequences, and to lower
them to `vid.v` with modifications for non-unit steps and non-zero
addends.
The sequences handled by this optimization must either be monotonically
increasing or decreasing. Consecutive elements holding the same value
indicate a fractional step which, while simple mathematically,
becomes more complex to handle both in the realm of lossy integer
division and in the presence of `undef`s.
For example, a common "interleaving" shuffle index will be lowered by
LLVM to both `<0,u,1,u,2,...>` and `<u,0,u,1,u,...>` `BUILD_VECTOR`
nodes. Either of these would ideally be lowered to `vid.v` shifted right
by 1. Detection of this sequence in presence of general `undef` values
is more complicated, however: `<0,u,u,1,>` could match either
`<0,0,0,1,>` or `<0,0,1,1,>` depending on later values in the sequence.
Both are possible, so backtracking or multiple passes is inevitable.
Sticking to monotonic sequences keeps the logic simpler as it can be
done in one pass. Fractional steps will likely be a separate
optimization in a future patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104921
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
Since we're still building on top of the MVT based infrastructure, we
need to track the pointer type/address space on the side so we can end
up with the correct pointer LLTs when interpreting CCValAssigns.
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch adds the builtins and instrisics for population
count, reversed load and store related operations.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D106021
The maskmovdqu instruction is an odd one: it has a 32-bit and a 64-bit
variant, the former using EDI, the latter RDI, but the use of the
register is implicit. In 64-bit mode, a 0x67 prefix can be used to get
the version using EDI, but there is no way to express this in
assembly in a single instruction, the only way is with an explicit
addr32.
This change adds support for the instruction. When generating assembly
text, that explicit addr32 will be added. When not generating assembly
text, it will be kept as a single instruction and will be emitted with
that 0x67 prefix. When parsing assembly text, it will be re-parsed as
ADDR32 followed by MASKMOVDQU64, which still results in the correct
bytes when converted to machine code.
The same applies to vmaskmovdqu as well.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103427
This patch makes vector spills valid for tail predication when all loads
from the same stack slot are within the loop
Differential Revision: https://reviews.llvm.org/D105443
This patch implements the `__popcntb` XL compatibility builtin for 32bit in the frontend and backend. This patch also updates tests for `__popcntb` and other XL Compat sync related builtins.
Reviewed By: #powerpc, nemanjai, amyk
Differential Revision: https://reviews.llvm.org/D105360
We have a DAG combine for recognizing the sequence of nodes that make up
an MVE VQDMULH, but only currently handles specifically legal types.
This patch expands that to other power-2 vector types. For smaller than
legal types this means any_extending the type and casting it to a legal
type, using a VQDMULH where we only use some of the lanes. The result is
sign extended back to the original type, to properly set the invalid
lanes. Larger than legal types are split into chunks with extracts and
concat back together.
Differential Revision: https://reviews.llvm.org/D105814
The underlying getMinVectorRegisterBitWidth() methods are const, but it was missed in a couple of TargetTransformInfo wrappers.
Noticed while working on D103925
This patch adds support for the following outer product instructions:
* BFMOPA, BFMOPS, FMOPA, FMOPS, SMOPA, SMOPS, SUMOPA, SUMOPS, UMOPA,
UMOPS, USMOPA, USMOPS.
Depends on D105570.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105571
This patch uses AtomicExpandPass to implement quadword lock free atomic operations. It adopts the method introduced in https://reviews.llvm.org/D47882, which expand atomic operations post RA to avoid spilling that might prevent LL/SC progress.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D103614
Replace the experimental clang builtins and LLVM intrinsics for these
instructions with normal codegen patterns. Resolves PR50435.
Differential Revision: https://reviews.llvm.org/D106019
Any def of EXEC prevents rematerialization of any VOP instruction
because of the physreg use. Create a callback to check if the
physreg use can be ingored to allow rematerialization.
Differential Revision: https://reviews.llvm.org/D105836
For i64 reductions we currently try and convert add(VMLALV(X, Y), B) to
VMLALVA(B, X, Y), incorporating the addition into the VMLALVA. If we
have an add of an existing VMLALVA, this patch pushes the add up above
the VMLALVA so that it may potentially be simplified further, for
example being folded into another VMLALV.
Differential Revision: https://reviews.llvm.org/D105686
This is mostly a minor convenience, but the pattern seems frequent
enough to be worthwhile (and we'll probably add more uses in the
future).
Differential Revision: https://reviews.llvm.org/D105850
Replace the experimental clang builtin and LLVM intrinsics for these
instructions with normal codegen patterns. Resolves PR50433.
Differential Revision: https://reviews.llvm.org/D105950
MVE does not have a VMLALV instruction that can perform v16i8 -> i64
reductions, like it does for v8i16->i64 and v4i32->i64 reductions. That
means that the pattern to create them will be spilt up by type
legalization, creating a lot of instructions.
This extends the patterns for matching i64 reductions a little to handle
the v16i8->i64 case. We need to turn them into a pair of v8i16->i64
VMLALVs that each perform half of the reduction and are summed together
(so the later is a VMLALVA). The order of the lanes does not matter for
the reduction so we generate a MVEEXT for the extension, that will
either be folded into a extending load or can be optimized to a
VREV/VMOVL. Some of the resulting codegen isn't optimal, but will be
improved in a later patch.
Differential Revision: https://reviews.llvm.org/D105680
At the moment, <vscale x 1 x eltty> are not yet fully handled by the
code-generator, so to avoid vectorizing loops with that VF, we mark the
cost for these types as invalid.
The reason for not adding a new "TTI::getMinimumScalableVF" is because
the type is supposed to be a type that can be legalized. It partially is,
although the support for these types need some more work.
Reviewed By: paulwalker-arm, dmgreen
Differential Revision: https://reviews.llvm.org/D103882
$ is used as PC for PowerPC inlineasm, ELF use it,
enable it for AIX XCOFF as well.
Reviewed By: #powerpc, amyk, nemanjai
Differential Revision: https://reviews.llvm.org/D105956
If we try to create a new GlobalVariable on each iteration, the Module will
detect the name collision and "helpfully" rename later iterations by appending
".1" etc. But "___udivsi3.1" doesn't exist and we definitely don't want to try
to call it.
So instead check whether there's already a global with the right name in the
module and use that if so.
We know that "CVTTPS2SI" returns 0x80000000 for out of range inputs (and for FP_TO_UINT, negative float values are undefined). We can use this to make unsigned conversions from vXf32 to vXi32 more efficient, particularly on targets without blend using the following logic:
small := CVTTPS2SI(x);
fp_to_ui(x) := small | (CVTTPS2SI(x - 2^31) & ARITHMETIC_RIGHT_SHIFT(small, 31))
Even on targets where "PBLENDVPS"/"PBLENDVB" exists, it is often a latency 2, low throughput instruction so this logic is applied there too (in particular for AVX2 also). It furthermore gets rid of one high latency floating point comparison in the previous lowering.
@TomHender checked the correctness of this for all possible floats between -1 and 2^32 (both ends excluded).
Original Patch by @TomHender (Tom Hender)
Differential Revision: https://reviews.llvm.org/D89697
This patch fixes code that incorrectly handled dbg.values with duplicate
location operands, i.e. !DIArgList(i32 %a, i32 %a). The errors in
question were caused by either applying an update to dbg.value multiple
times when the update is only valid once, or by updating the
DIExpression for only the first instance of a value that appears
multiple times.
Differential Revision: https://reviews.llvm.org/D105831
Using positive zero as the neutral element in 'fadd' reductions, while
it generates better code, is incorrect. The correct neutral element is
negative zero: 0.0 + -0.0 = 0.0, whereas -0.0 + -0.0 = -0.0.
There are perhaps more optimal lowerings of negative zero avoiding
constant-pool loads which could be left as future work.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D105902
If no scratch or flat instructions are used, we do not need to
initialize the flat scratch hardware register.
Differential Revision: https://reviews.llvm.org/D105920
SME introduces the ZA array, a new piece of architectural register state
consisting of a matrix of [SVLb x SVLb] bytes, where SVL is the
implementation defined Streaming SVE vector length and SVLb is the
number of 8-bit elements in a vector of SVL bits.
SME instructions consist of three types of matrix operands:
* Tiles: a ZA tile is a square, two-dimensional sub-array of elements
within the ZA array. These tiles make up the larger accumulator array
and the granularity varies based on the element size, i.e.
- ZAQ0..ZAQ15 (smallest tile granule)
- ZAD0..ZAD7
- ZAS0..ZAS3
- ZAH0..ZAH1
or ZAB0 (largest tile granule, single tile)
* Tile vectors: similar to regular tiles, but have an extra 'h' or 'v'
to tell how the vector at [reg+offset] is layed out in the tile,
horizontally or vertically. E.g. za1h.h or za15v.q, which corresponds
to vectors in registers ZAH1 and ZAQ15, respectively.
* Accumulator matrix: this is the entire accumulator array ZA.
This patch adds the register classes and related operands and parsing
for SME instructions operating on the accumulator array.
The ADDHA and ADDVA instructions which operate on tiles are also added
in this patch to make some use of the code added, later patches will
make use of the other operands introduced here.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Co-authored by: Sander de Smalen (@sdesmalen)
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105570
This patch aims to revert the changes introduced by D70781 D71192 D76364
D70781 was introduced to fix hardware hang where we do not insert exp-
null-done for a kill inside infinit loop. At that time we have not added
exp-null-done for kill early termination, but I believe as for now, we will
always add the exp-null-done for early termination case in LaterBranchLowering.
D71192 was introduced to handle the only_kill case, which is also been
handled by the kill early termination work.
D76364 was used to fix a regression by D71192, where we cleared the done
bit of the export in the existing program and not let the normal return
block branching to the new unified return block.
With this change, we just trust frontends have setup exp-done correctly
which is true for all existing frontends. The backend only inserts
exp-null-done for the kill cases which is handled in SILateBranchLowering.cpp.
Reviewed by: critson
Differential Revision: https://reviews.llvm.org/D105610
Allow
```
%x:_<2 x p0> = G_INTTOPTR %y:_<2 x s64>
```
This shows up when building clang for AArch64 with GlobalISel.
Also show that we can select it.
This should match SDAG's behaviour: https://godbolt.org/z/33oqYoaYv
Differential Revision: https://reviews.llvm.org/D105944
AMDGPU normally spills SGPRs to VGPRs. Previously, since all register
classes are handled at the same time, this was problematic. We don't
know ahead of time how many registers will be needed to be reserved to
handle the spilling. If no VGPRs were left for spilling, we would have
to try to spill to memory. If the spilled SGPRs were required for exec
mask manipulation, it is highly problematic because the lanes active
at the point of spill are not necessarily the same as at the restore
point.
Avoid this problem by fully allocating SGPRs in a separate regalloc
run from VGPRs. This way we know the exact number of VGPRs needed, and
can reserve them for a second run. This fixes the most serious
issues, but it is still possible using inline asm to make all VGPRs
unavailable. Start erroring in the case where we ever would require
memory for an SGPR spill.
This is implemented by giving each regalloc pass a callback which
reports if a register class should be handled or not. A few passes
need some small changes to deal with leftover virtual registers.
In the AMDGPU implementation, a new pass is introduced to take the
place of PrologEpilogInserter for SGPR spills emitted during the first
run.
One disadvantage of this is currently StackSlotColoring is no longer
used for SGPR spills. It would need to be run again, which will
require more work.
Error if the standard -regalloc option is used. Introduce new separate
-sgpr-regalloc and -vgpr-regalloc flags, so the two runs can be
controlled individually. PBQB is not currently supported, so this also
prevents using the unhandled allocator.
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch adds the builtins and instrisics for compare
and multiply related operations.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D102875
[NFC] This patch adds features for pwr7, pwr8, and pwr9 that can be
used for semachecking builtin functions that are only valid for certain
versions of ppc.
Reviewed By: nemanjai, #powerpc
Authored By: Quinn Pham <Quinn.Pham@ibm.com>
Differential revision: https://reviews.llvm.org/D105501
We don't really have optimizations for division with a constant
LHS. If we don't use a W instruction we end up needing to sign
or zero extend the RHS to use the 64-bit instruction.
I had to sign_extend i32 constants on the LHS instead of using
any_extend which becomes zero_extend. If we don't do this, constants
that were originally negative become harder to materialize. I think
this problem exists for more of our W instruction cases. For example
(i32 (shl -1, X)), but we don't have lit tests. I'll work on that
as a follow up.
I also left a FIXME for enabling W instruction for RHS constants
under -Oz.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D105769
This patch adds a function that checks whether or not the frame index
is aligned when the computed addressing mode is an aligned D-Form (DS, or DQ-Form).
If the frame index appears to be unaligned, within these two modes, reset
the mode to X-Form in order to fall back to selection X-Form loads.
A test case is added to ensure that the test emits X-Form loads and not DQ-Form
loads since the frame index is not aligned within the test case.
Differential Revision: https://reviews.llvm.org/D105661
Some microarchitectures treat rs1=x1/x5 on jalr as a hint to pop
the return-address stack. We should avoid using x5 on jalr
instructions since we aren't using x5 as an alternate link register.
Differential Revision: https://reviews.llvm.org/D105875
Similar to D46745, "S" represents an absolute symbolic operand, which
can be used to specify the access models, e.g.
extern int var;
void *addr_via_asm() {
void *ret;
asm("lui %0, %%hi(%1)\naddi %0,%0,%%lo(%1)" : "=r"(ret) : "S"(&var));
return ret;
}
'S' is documented in trunk GCC: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101275
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D105254
LDARX and LWARX sometimes gets optimized out by the compiler
when it is critical to the correctness of the code. This inline asm generation
ensures that it preserved.
Differential Revision: https://reviews.llvm.org/D105754
[NFC] This patch adds features for pwr7, pwr8, and pwr9 that can be
used for semachecking builtin functions that are only valid for certain
versions of ppc.
Reviewed By: nemanjai, #powerpc
Authored By: Quinn Pham <Quinn.Pham@ibm.com>
Differential revision: https://reviews.llvm.org/D105501
This makes them consistent with all the other return convention
handling. If we don't do this, we lose the sext/zext flag if treated
as a full assignment, which complicates a future GlobalISel patch.
This also fixes some missing implicit uses on call instructions, adds
missing G_ASSERT_SEXT/ZEXT annotations, and some missing outgoing
sext/zexts. This also fixes not respecting tablegen requested type
promotions.
This starts treating f64 passed in i32 GPRs as a type of custom
assignment, which restores some previously XFAILed tests. This is due
to getNumRegistersForCallingConv returns a static value, but in this
case it is context dependent on other arguments.
Most of the ugliness is reproducing a hack CC_MipsO32 uses in
SelectionDAG. CC_MipsO32 depends on a bunch of vectors populated from
the original IR argument types in MipsCCState. The way this ends up
working in GlobalISel is it only ends up inspecting the most recently
added vector element. I'm pretty sure there are cleaner ways to do
this, but this seemed easier than fixing up the current DAG
handling. This is another case where it would be easier of the
CCAssignFns were passed the original type instead of only the
pre-legalized ones.
There's still a lot of junk here that shouldn't be necessary. This
also likely breaks big endian handling, but it wasn't complete/tested
anyway since the IRTranslator gives up on big endian targets.
The number of registers used for passing f64 in some cases is context
dependent, and thus getNumRegistersForCallingConv is sometimes
inaccurate. For f64, it reports 1 but is sometimes split into 2 32-bit
registers.
For GlobalISel, the generic argument assignment code expects
getNumRegistersForCallingConv to return an accurate answer. Switch to
marking these arguments as custom so we can deal with this case as a
custom assignment rather.
This temporarily breaks a few globalisel tests which are fixed by a
future change to use more of the generic infrastructure.
Annoyingly, i686 cmpsd handling still fails to remove the unnecessary neg(and(x,1))
Reapplied rGe4aa6ad13216 with fix for intrinsic variants of the opcode which uses a vector return type
Currently, if target of s_branch instruction is in another section, it will fail with the error of undefined label. Although in this case, the label is not undefined but present in another section. This patch tries to handle this issue. So while handling fixup_si_sopp_br fixup in getRelocType, if the target label is undefined we issue an error as before. If it is defined, a new relocation type R_AMDGPU_REL16 is returned.
This issue has been reported in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100181 and https://bugs.llvm.org/show_bug.cgi?id=45887. Before https://reviews.llvm.org/D79943, we used to get an crash for this scenario. The crash is fixed now but the we still get an undefined label error. Jumps to other section can arise with hold/cold splitting.
A patch to handle the relocation in lld will follow shortly.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D105760
The loops are run exactly once per lane, so VGPRs do not need to be
saved. Use the SIOptimizeVGPRLiveRange pass to add phi nodes that take
undef when coming from the loop.
There is still a shortcoming:
Return values from a function call in the loop are copied because their
live range conflicts with the live range of arguments, even if arguments
are only IMPLICIT_DEF after the phi insertion.
Differential Revision: https://reviews.llvm.org/D105192
Often when lowering vector shuffles, we split the shuffle into two
LHS/RHS shuffles which are then blended together. To do so we split the
original indices into two, indexed into each respective vector. These
two index vectors are then separately lowered as BUILD_VECTORs.
This patch forwards on any undef indices to the BUILD_VECTOR, rather
than having the VECTOR_SHUFFLE lowering decide on an optimal concrete
index. The motiviation for ths change is so that we don't duplicate
optimization logic between the two lowering methods and let BUILD_VECTOR
do what it does best.
Propagating undef in this way allows us, for example, to generate
`vid.v` to produce the LHS indices of commonly-used interleave-type
shuffles. I have designs on further optimizing interleave-type and other
common shuffle patterns in the near future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104789
This is a pilot change to verify the logic. The rest will be
done in a same way, at least the rest of VOP1.
Differential Revision: https://reviews.llvm.org/D105742
Similar to D91921 (and D104515) this introduces two MVESEXT and MVEZEXT
nodes that larger-than-legal sext and zext are lowered to. These either
get optimized away or end up becoming a series of stack loads/store, in
order to perform the extending whilst keeping the order of the lanes
correct. They are generated from v8i16->v8i32, v16i8->v16i16 and
v16i8->v16i32 extends, potentially with a intermediate extend for the
larger v16i8->v16i32 extend. A number of combines have been added for
obvious cases that come up in tests, notably MVEEXT of shuffles. More
may be needed in the future, but this seems to cover most of the cases
that come up in the tests.
Differential Revision: https://reviews.llvm.org/D105090
An assertion of the following can occur because Altivec and VSX splats use a different operand number for the immediate:
```
int64_t llvm::MachineOperand::getImm() const: Assertion `isImm() && "Wrong MachineOperand accessor"' failed.
```
This patch updates PPCMIPeephole.cpp assign the correct splat immediate.
Differential Revision: https://reviews.llvm.org/D105790
Update (mainly) vXf32/vXf64 -> vXi8/vXi16 fptosi/fptoui costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
This change is a step towards implementing codegen for __builtin_clz().
Full support for CLZ with a regression test will follow shortly.
Differential Revision: https://reviews.llvm.org/D105560
The lowering for v2i64 is now guarded with hasDirectMove,
however, the current lowering can handle the pattern correctly,
only lowering it when there is efficient patterns and corresponding
instructions.
The original guard was added in D21135, and was for Legal action.
The code has evloved now, this guard is not necessary anymore.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D105596
Replace the clang builtin function and LLVM intrinsic for
f32x4.demote_zero_f64x2 with combines from normal SDNodes. Also add missing
combines for i32x4.trunc_sat_zero_f64x2_{s,u}, which share the same pattern.
Differential Revision: https://reviews.llvm.org/D105755
There are some calls to functions like `__alloca` that are missing
a regmask operand. Lack of a regmask operand means that all
registers that aren't mentioned by def operands are preserved.
__alloca only updates EAX and ESP and has def operands for
them so this is ok. Because there is no regmask the register
allocator won't spill the FP registers across the call. Assuming
we want to keep the FP stack untoched across these calls, we
need to handle this is in the FP stackifier.
We might want to add a proper regmask operand to the code that
creates these calls to indicate all registers are preserved, but we'd
still need this change to the FP stackifier to know to preserve the
FP stack for such a regmask.
The test is kind of long, but bugpoint wasn't able to reduce it
any further.
Fixes PR50782
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D105762
This patch implements trap and FP to and from double conversions. The builtins
generate code that mirror what is generated from the XL compiler. Intrinsics
are named conventionally with builtin_ppc, but are aliased to provide the same
builtin names as the XL compiler.
Differential Revision: https://reviews.llvm.org/D103668
First patch in a series adding MC layer support for the Arm Scalable
Matrix Extension.
This patch adds the following features:
sme, sme-i64, sme-f64
The sme-i64 and sme-f64 flags are for the optional I16I64 and F64F64
features.
If a target supports I16I64 then the following instructions are
implemented:
* 64-bit integer ADDHA and ADDVA variants (D105570).
* SMOPA, SMOPS, SUMOPA, SUMOPS, UMOPA, UMOPS, USMOPA, and USMOPS
instructions that accumulate 16-bit integer outer products into 64-bit
integer tiles.
If a target supports F64F64 then the FMOPA and FMOPS instructions that
accumulate double-precision floating-point outer products into
double-precision tiles are implemented.
Outer products are implemented in D105571.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D105569
Don't use a local MachineOperand copy in SystemZAsmPrinter::PrintAsmOperand()
and change the register as it may break the MRI tracking of register
uses. Use an MCOperand instead.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D105757
Update truncation costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
This sets the latency of stores to 1 in the Cortex-A55 scheduling model,
to better match the values given in the software optimization guide.
The latency of a store in normal llvm scheduling does not appear to have
a lot of uses. If the store has no outputs then the latency is somewhat
meaningless (and pre/post increment update operands use the WriteAdr
write for those operands instead). The one place it does alter things is
the latency between a store and the end of the scheduling region, which
can in turn have an effect on the critical path length. As a result a
latency of 1 is more correct and offers ever-so-slightly better
scheduling of instructions near the end of the block.
They are marked as RetireOOO to keep the llvm-mca from introducing
stalls where non would exist.
Differential Revision: https://reviews.llvm.org/D105541
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
The original motivation for this was to implement moreElementsVector of shuffles
on AArch64, which resulted in complex sequences of artifacts like unmerge(unmerge(concat...))
which the combiner couldn't handle. It seemed here that the better option,
instead of writing ever-more-complex combines, was to have a way to find
the original "non-artifact" source registers for a given definition, walking
through arbitrary expressions of unmerge/concat/insert. As long as the bits
aren't extended or truncated, this is a pretty simple algorithm that avoids
the need for lots of combines and instead jumps straight to the final result
we want.
I've only used this new technique in 2 places within tryCombineUnmerge, using it
in more general situations resulted in infinite loops in AMDGPU. So for now
it's used when we would otherwise fail to combine and that seems to work.
In order to support looking through G_INSERTs, I also had to add it as an
artifact in isArtifact(), which caused a whole lot of issues in tests. AMDGPU
started infinite looping since full legalization of G_INSERT doensn't seem to
be there. To work around this, I've temporarily added a CLI option to use the
old behaviour so that the MIR tests will still run and terminate.
Other minor changes include no longer making >128b G_MERGE/UNMERGE legal.
We never had isel support for that anyway and it was a remnant of the legacy
legalizer rules. However being legal prevented the combiner from checking if it
was dead and deleting them.
Differential Revision: https://reviews.llvm.org/D104355
Replace the clang builtin function and LLVM intrinsic previously used to select
the f64x2.promote_low_f32x4 instruction with custom combines from standard
SelectionDAG nodes. Implement the new combines to share code with the similar
combines for f64x2.convert_low_i32x4_{s,u}. Resolves PR50232.
Differential Revision: https://reviews.llvm.org/D105675
This to protect against non-sensical instruction sequences being assembled,
which would either cause asserts/crashes further down, or a Wasm module being output that doesn't validate.
Unlike a validator, this type checker is able to give type-errors as part of the parsing process, which makes the assembler much friendlier to be used by humans writing manual input.
Because the MC system is single pass (instructions aren't even stored in MC format, they are directly output) the type checker has to be single pass as well, which means that from now on .globaltype and .functype decls must come before their use. An extra pass is added to Codegen to collect information for this purpose, since AsmPrinter is normally single pass / streaming as well, and would otherwise generate this information on the fly.
A `-no-type-check` flag was added to llvm-mc (and any other tools that take asm input) that surpresses type errors, as a quick escape hatch for tests that were not intended to be type correct.
This is a first version of the type checker that ignores control flow, i.e. it checks that types are correct along the linear path, but not the branch path. This will still catch most errors. Branch checking could be added in the future.
Differential Revision: https://reviews.llvm.org/D104945
LLVM provides target hooks to recognise stack spill and restore
instructions, such as isLoadFromStackSlot, and it also provides post frame
elimination versions such as isLoadFromStackSlotPostFE. These are supposed
to return the store-source and load-destination registers; unfortunately on
X86, the PostFE recognisers just return "1", apparently to signify "yes
it's a spill/load". This patch alters the hooks to correctly return the
store-source and load-destination registers:
This is really useful for debug-info as we it helps follow variable values
as they move on/off the stack. There should be no codegen changes: the only
other users of these PostFE target hooks are MachineInstr::getRestoreSize
and MachineInstr::getSpillSize, which don't attempt to interpret the
returned register location.
While we're here, delete the (InstrRef) LiveDebugValues heuristic that
tries to find the spill source register by looking for a killed reg -- we
should be able to rely on the target hooks for that. This involves
temporarily turning off a n InstrRef LivedDebugValues test on aarch64
(patch to re-enable it is in D104521).
Differential Revision: https://reviews.llvm.org/D105428
Fails with:
```
/build/llvm-toolchain-snapshot-13~++20210709092633+88326bbce38c/llvm/lib/Target/M68k/GlSel/M68kCallLowering.cpp: In member function 'virtual bool llvm::M68kCallLowering::lowerReturn(llvm::MachineIRBuilder&, const llvm::Value*, llvm::ArrayRef<llvm::Register>, llvm::FunctionLoweringInfo&, llvm::Register) const':
/build/llvm-toolchain-snapshot-13~++20210709092633+88326bbce38c/llvm/lib/Target/M68k/GlSel/M68kCallLowering.cpp:71:42: error: no matching function for call to 'llvm::CallLowering::ArgInfo::ArgInfo(<brace-enclosed initializer list>)'
ArgInfo OrigArg{VRegs, Val->getType()};
```
Differential Revision: https://reviews.llvm.org/D105689
Summary:
The bit order of the has_vec and longtbtable bits in the traceback table generated by the XL compiler flipped at some point after v12.1. This is different from the definition is the AIX header debug.h. The change in the XL compiler that caused the deviation from the OS header definition was unintentional. Since both orderings are extant and the XL compiler runtime also expects the ordering defined by the OS, we will correct the output from LLVM to match the defined ordering given by the OS (which is also consistent with the Assembler Language Reference). Mitigation for traceback tables encoded with the wrong ordering is required for either ordering.
Reviewers: XingXue, HubertTong
Differential Revision: https://reviews.llvm.org/D105487
Its proving tricky to move this to the generic legalizer code, so manually insert the v2i32 subvector into v4i32, insert the AssertSext/AssertZext node, then extract the subvector again.
This avoids masks in the truncation/pack code, which means we avoid a PSHUFB in the fp_to_sint/uint code for sub-128 bit types (specific targets can still combine the packs to a pshufb if they have fast variable per-lane shuffles).
This was noticed when I was trying to improve fp_to_sint/uint costs with D103695 (and some targets had very high fp_to_sint costs due to the PSHUFB), so we can then update the fp_to_uint codegen from D89697.
This patch removes the IsPairwiseForm flag from the Reduction Cost TTI
hooks, along with some accompanying code for pattern matching reductions
from trees starting at extract elements. IsPairWise is now assumed to be
false, which was the predominant way that the value was used from both
the Loop and SLP vectorizers. Since the adjustments such as D93860, the
SLP vectorizer has not relied upon this distinction between paiwise and
non-pairwise reductions.
This also removes some code that was detecting reductions trees starting
from extract elements inside the costmodel. This case was
double-counting costs though, adding the individual costs on the
individual instruction _and_ the total cost of the reduction. Removing
it changes the costs in llvm/test/Analysis/CostModel/X86/reduction.ll to
not double count. The cost of reduction intrinsics is still tested
through the various tests in
llvm/test/Analysis/CostModel/X86/reduce-xyz.ll.
Differential Revision: https://reviews.llvm.org/D105484
When the instruction has imm form and fed by LI, we can remove the redundat LI instruction.
Below is an example:
```
renamable $x5 = LI8 2
renamable $x4 = exact SRD killed renamable $x4, killed renamable $r5, implicit $x5
```
will be converted to:
```
renamable $x5 = LI8 2
renamable $x4 = exact RLDICL killed renamable $x4, 62, 2, implicit killed $x5
```
But when we do this optimization, we forget to remove implicit killed $x5
This bug has caused a lnt case error. This patch is to fix above bug.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D85288
The rest of the SOP instructions implicitly set SCC and not
suitable for the rematerialization.
Differential Revision: https://reviews.llvm.org/D105670
This parameter controls how much space is reserved for incoming
values. There are always going to be 2 incoming values in this case.
While there remove the unused std::vector right below.
Found while looking at porting this code to RISCV.
Override the `shouldScalarizeBinop` target lowering hook using the same
implementation used in the x86 backend. This causes `extract_vector_elt`s of
vector binary ops to be scalarized if the scalarized version would be supported.
Differential Revision: https://reviews.llvm.org/D105646
Noticed while making a related change. This code was doing
something really peculiar: Creating an APInt by parsing a string.
And then creating a SmallVector with one element to create the
GEP.
Instead create the APInt from integers and directly pass the single
index to GetElementPtrInst::Create().
Revived D101297 in its original form + added some changes in X86
legalization cehcking for masked gathers.
This solution is the most stable and the most correct one. We have to
check the legality before trying to build the masked gather in SLP.
Without this check we have incorrect cost (for SLP) in case if the masked gather
is not legal/slower than the gather. And we're missing some
vectorization opportunities.
This can be fixed in the cost model, but in this case we need to add
special checks for the cost of GEPs for ScatterVectorize node, add
special check for small trees, etc., i.e. there are a lot of corner
cases here and there, which insrease code base and make it harder to
maintain the code.
> Can't we rely on cost model to deal with this? This can be profitable for futher vectorization, when we can start from such gather loads as seed.
The question from D101297. Actually, no, it can't. Actually, simple
gather may give us better result, especially after we started
vectorization of insertelements. Plus, like I said before, the cost for
non-legal masked gathers leads to missed vectorization opportunities.
Differential Revision: https://reviews.llvm.org/D105042
SelectionDAG's equivalents in ISD::InputArg/OutputArg track the
original argument index. Mips relies on this, and its currently
reinventing its own parallel CallLowering infrastructure which tracks
these indexes on the side. Add this to help move towards deleting the
custom mips handling.
This is a cleanup patch -- we're now able to support all flavours of
variable location in instruction referencing mode. This patch updates
various tests for debug instructions to be broader: numerous code paths
try to ignore debug isntructions, and they now have to ignore the
additional DBG_PHI and DBG_INSTR_REFs that we can generate.
A small amount of rework happens for LiveDebugVariables: as we don't need
to track live intervals through regalloc any more, we can get away with
unlinking debug instructions before regalloc, then re-inserting them after.
Note that this isn't (yet) true of DBG_VALUE_LISTs, they still have to go
through live interval tracking.
In SelectionDAG, add a helper lambda that emits half-formed DBG_INSTR_REFs
for arguments in instr-ref mode, DBG_VALUE otherwise. This is one of the
final locations where DBG_VALUEs are emitted for vreg arguments.
X86InstrInfo now un-sets the debug instr number on SUB instructions that
get mutated into CMP instructions. As the instruction no longer computes a
subtraction, we can't use it for variable locations.
Differential Revision: https://reviews.llvm.org/D88898
- In [D98783](https://reviews.llvm.org/D98783), an extra GlobalDCE pass
is inserted before the internalization pass to ensure a global
variable without users could be internalized even if there are dead
users. Instead of inserting a dedicated optimization pass, the
dead user checking, i.e. 'use_empty()', should be preceeded with
constant dead user removal to ensure an accurate result.
Differential Revision: https://reviews.llvm.org/D105590
Additionally, lower the floating point compare SVE intrinsics to
SETCC_MERGE_ZERO ISD nodes to avoid duplicating ISel patterns.
Differential Revision: https://reviews.llvm.org/D105486
WebAssembly's shift instructions implicitly masks the shift count, so optimize
out redundant explicit masks of the shift count. For vector shifts, this
currently only works if the mask is applied before splatting the shift count,
but this should be addressed in a future commit. Resolves PR49655.
Differential Revision: https://reviews.llvm.org/D105600
Lowering for scalar to vector would skip if current subtarget is big
endian and the scalar is larger or equal than 64 bits. However there's
some issue in implementation that SToVRHS may refer to SToVLHS's scalar
size if SToVLHS is present, which leads to some crash.o
Reviewed By: nemanjai, shchenz
Differential Revision: https://reviews.llvm.org/D105094
This commit also makes some slight changes to the scheduling model for AMDGPU to set the RetireOOO flag for all scheduling classes.
This flag is only used by llvm-mca and allows instructions to retire out of order.
See the differential link below for a deeper explanation of everything.
Differential Revision: https://reviews.llvm.org/D104730
This patch prevents GlobalISel from optimizing out redundant branch
instructions when compiling without optimizations.
The motivating example is code like the following common pattern in
Swift, where users expect to be able to set a breakpoint on the early
exit:
public func f(b: Bool) {
guard b else {
return // I would like to set a breakpoint here.
}
...
}
The patch modifies two places in GlobalISEL: The first one is in
IRTranslator.cpp where the removal of redundant branches is made
conditional on the optimization level. The second one is in
AArch64InstructionSelector.cpp where an -O0 *only* optimization is
being removed.
Disabling these optimizations increases code size at -O0 by
~8%. However, doing so improves debuggability, and debug builds are
the primary reason why developers compile without optimizations. We
thus concluded that this is the right trade-off.
rdar://79515454
Differential Revision: https://reviews.llvm.org/D105238
There are some patterns involving the permuted scalar to vector node
for which we don't have patterns without direct moves on little endian
subtargets. This causes selection errors. While we can of course add
the missing patterns, any additional effort to make this work is not
useful since there is no support for any CPU that can run in
little endian mode and does not support direct moves.
Tres Popp