This patch implements store, load, move from and to registers related
builtins, as well as the builtin for stfiw. The patch aims to provide
feature parady with xlC on AIX.
Differential revision: https://reviews.llvm.org/D105946
Add manual selection code similar to the code in AArch64ISelDAGToDAG, and add
`createTuple` helpers similar to the code there as well.
This accounted for around 111 fallbacks while building clang for AArch64 with
GlobalISel.
This also should make it easy to add selection code for other store
intrinsics.
As a minor cleanup, this uses `createQTuple` in the other place where we use
REG_SEQUENCE.
Differential Revision: https://reviews.llvm.org/D106332
Basically two parts to this fix:
1. Stop using AtomicExpand to expand cmpxchg i128
2. Fix AArch64ExpandPseudoInsts to use a correct expansion.
From ARM architecture reference:
To atomically load two 64-bit quantities, perform a Load-Exclusive
pair/Store-Exclusive pair sequence of reading and writing the same value
for which the Store-Exclusive pair succeeds, and use the read values
from the Load-Exclusive pair.
Fixes https://bugs.llvm.org/show_bug.cgi?id=51102
Differential Revision: https://reviews.llvm.org/D106039
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch add the builtin and emit target independent
code for __cmpb.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D105194
If we need to shift left anyway we might be able to take advantage
of LUI implicitly shifting its immediate left by 12 to cover part
of the shift. This allows us to use more bits of the LUI immediate
to avoid an ADDI.
isDesirableToCommuteWithShift now considers compressed instruction
opportunities when deciding if commuting should be allowed.
I believe this is the same or similar to one of the optimizations
from D79492.
Reviewed By: luismarques, arcbbb
Differential Revision: https://reviews.llvm.org/D105417
Replace some existing isel patterns that are covered by the new
code. SLLIUWPat has been removed in favor of folding its root case
into the new code. The other uses in isel patterns for shXadd.uw
have been switched to using hardcoded AND masks.
This is based on the original version of D49585 from ARM. The final
version of that was made a DAG combine, but I've chosen to keep it
as custom isel. I'm not convinced DAG combine is as good with
shift pairs as it is with and+shift. I saw some issues optimizing
the shifts created by vscale lowering if an and isn't created for
from a shift pair.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D106230
ACC registers are a combination of four consecutive vector registers.
If the vector registers are assigned first this often forces a number
of copies to appear just before the ACC register is created. If the ACC
register is assigned first then fewer copies are generated when the vector
registers are assigned.
This patch tries to force the register allocator to assign the ACC registers first
and then the UACC registers and then the vector pair registers. It does this
by changing the priority of the register classes.
This patch also adds hints to help the register allocator assign UACC registers from
known ACC registers and vector pair registers from known UACC registers.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D105854
I don't think the semantics of the llvm masked gather intrinsic care
about the order the elements are loaded. For example, type legalization
by splitting will chain them in parallel. This is different than
scatter which we do chain in order.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D106025
We were using auto instead of auto* in a number of places which failed the llvm-qualified-auto check.
Additionally we were using auto in some places where the type wasn't immediately obvious - the style guide rule of thumb is only to use auto from casts etc. where the type is already explicitly stated.
First, collect the register usage in each function, then apply the
maximum register usage of all functions to functions with indirect
calls.
This is more accurate than guessing the maximum register usage without
looking at the actual usage.
As before, assume that indirect calls will hit a function in the
current module.
Differential Revision: https://reviews.llvm.org/D105839
This patch adds the new system registers introduced in SME:
- ID_AA64SMFR0_EL1 (ro) SME feature identifier.
- SMCR_ELx (r/w) streaming mode control register for configuring
effective SVE Streaming SVE Vector length when the PE is in
Streaming SVE mode.
- SVCR (r/w) streaming vector control register, visible at all
exception levels. Provides access to PSTATE.SM and PSTATE.ZA
using MSR and MRS instructions.
- SMPRI_EL1 (r/w) streaming mode execution priority register.
- SMPRIMAP_EL2 (r/w) streaming mode priority mapping register.
- SMIDR_EL1 (ro) streaming mode identification register.
- TPIDR2_EL0 (r/w) for use by SME software to manage per-thread
SME context.
- MPAMSM_EL1 (r/w) MPAM (v8.4) streaming mode register, for
labelling memory accesses performed in streaming mode.
Also added in this patch are the SME mode change instructions.
Three MSR immediate instructions are implemented to set or clear
PSTATE.SM, PSTATE.ZA, or both respectively:
- MSR SVCRSM, #<imm1>
- MSR SVCRZA, #<imm1>
- MSR SVCRSMZA, #<imm1>
The following smstart/smstop aliases are also implemented for
convenience:
smstart -> MSR SVCRSMZA, #1
smstart sm -> MSR SVCRSM, #1
smstart za -> MSR SVCRZA, #1
smstop -> MSR SVCRSMZA, #0
smstop sm -> MSR SVCRSM, #0
smstop za -> MSR SVCRZA, #0
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105576
Debug info sections need R_WASM_FUNCTION_OFFSET_I32 relocs (with FK_Data_4 fixup
kinds) to refer to functions (instead of R_WASM_TABLE_INDEX as is used in data
sections). Usually this is done in a convoluted way, with unnamed temp data
symbols which target the start of the function, in which case
WasmObjectWriter::recordRelocation converts it to use the section symbol
instead. However in some cases the function can actually be undefined; in this
case the dwarf generator uses the function symbol (a named undefined function
symbol) instead. In that case the section-symbol transform doesn't work and we
need to generate the correct reloc type a different way. In this change
WebAssemblyWasmObjectWriter::getRelocType takes the fixup section type into
account to choose the correct reloc type.
Fixes PR50408
Differential Revision: https://reviews.llvm.org/D103557
RISCV would prefer a sign extended constant since that works better
with our constant materialization. We have an existing TLI hook we
use to control sign extension of setcc operands in type legalization.
That hook happens to do the right check we need here, but might be
straying from its original purpose. With only RISCV defining this
hook in tree, I wasn't sure if it was worth adding another hook
with identical behavior.
This is an alternative to D105785 where I tried to handle this in
the RISCV backend by not creating ANY_EXTENDs in some places.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D105918
This removes the promotion of NEON AND, OR and XOR nodes to v2i32/v4i32,
treating them the same as the AArch64 and MVE backends where we just add
the relevant patterns for each legal type. This prevents a lot of
bitcasts from being added to the DAG, which have the potential to make
optimizations more difficult. It does mean adding extra patterns, and
some codegen can change due to the types now being legal, not promoted.
Differential Revision: https://reviews.llvm.org/D105588
Avoid a crash when using instruction referencing if x87 floating point
instructions are used. These instructions are significantly mutated when
they're rewritten from referring to registers, to referring to
floating-point-stack positions. As a result, their operands are re-ordered,
and (InstrRef) LiveDebugValues asserts when it sees a DBG_INSTR_REF
referring to a non-reg non-def register operand.
To fix this, drop the instruction numbers, and thus variable locations.
This patch adds a helper utility do do that.
Dropping the variable locations is sub-optimal, but applying DBG_VALUEs to
the $fp0 and similar registers is dropped on emission too. It seems we've
never done well at describing variables that live in x87 registers, at all.
Differential Revision: https://reviews.llvm.org/D105657
VE's linker, /opt/nec/ve/bin/nld, doesn't implement relative lookup table.
The relative lookup table is introduced by https://reviews.llvm.org/D94355,
but we need to disable it at the moment.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D106224
This relaxes the VMLAV and VADDV reduction recognition code to handle
smaller than legal types, extending them as needed. That was already
handled for some reductions, this extends it to more types in a more
generic way. If a smaller than legal value is found it is extended to
the legal type as needed.
Differential Revision: https://reviews.llvm.org/D106051
The case for nxv2f32/nxv2i32 was already covered by D104573.
This patch builds on top of that by making the mechanism work for
nxv2[b]f16/nxv2i16, nxv4[b]f16/nxv4i16 as well.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D106138
This reverts commit 2a419a0b99.
The result of a shufflevector must not propagate poison from any element
other than the one noted in the shuffle mask.
The regressions outside of fptoui-may-overflow.ll can probably be
recovered some other way; for example, using isGuaranteedNotToBePoison.
See discussion on https://reviews.llvm.org/D106053 for more background.
Differential Revision: https://reviews.llvm.org/D106222
D106053 exposed that we've not been taking into account that by bitcasting smaller elements together and then performing a ComputeKnownBits on the result we'd be allowing a poison element to influence other neighbouring elements being used in the pack. Instead we now peek through any existing bitcast to ensure that the source type already matches the width source of the pack node we're trying to match.
This has also been a chance to stop matchShuffleWithPACK creating unused nodes on the fly which could affect oneuse tests during shuffle lowering/combining.
The only regression we're seeing is due to being unable to peek through a bitcast as its on the other side of a extract_subvector - which should go away once we finally allow shuffle combining across different vector widths (by making matchShuffleWithPACK using const SelectionDAG& we've gotten closer to this - see PR45974).
Corollary to 1113e06821 this allows us to
match gather that dont produce a full vector width results. They use an
extended gather which is truncated back to the original type.
Rewrite patterns to assume that the operand of STEP_VECTOR is a
constant. The old patterns will stop working when the operand is changed
from a Constant to a TargetConstant. (See D105673.)
Add test coverage for certain patterns that weren't exercised by
existing regression tests.
Differential Revision: https://reviews.llvm.org/D105847
Remove uses of to-be-deprecated API. In cases where the correct
element type was not immediately obvious to me, fall back to
explicit getPointerElementType().
Remove uses of to-be-deprecated API. I've fallen back to calling
getPointerElementType() in some cases where the correct type wasn't
immediately obvious to me.
Use the elementtype attribute introduced in D105407 for the
llvm.preserve.array/struct.index intrinsics. It carries the
element type of the GEP these intrinsics effectively encode.
This patch:
* Adds a verifier check that the attribute is required.
* Adds it in the IRBuilder methods for these intrinsics.
* Autoupgrades old bitcode without the attribute.
* Updates the lowering code to use the attribute rather than
the pointer element type.
* Updates lots of tests to specify the attribute.
* Adds -force-opaque-pointers to the intrinsic-array.ll test
to demonstrate they work now.
https://reviews.llvm.org/D106184
We assume VLENB is a multiple of 8 and previously relied on shift
pairs being optimized to an AND+SHL/SHR and computeKnownBits
removing the AND. This doesn't happen if (vlenb >> 3) gets CSEd
to have multiple uses. This patch manually emits the best shift
to workaround this.
This provides intrinsics for emitting instructions that set the FPSCR (`mtfsf/mtfsfi`).
The patch also conservatively marks the rounding mode as an implicit def for both since they both may set the rounding mode depending on the operands.
Reviewed By: #powerpc, qiucf
Differential Revision: https://reviews.llvm.org/D105957
Fixes issue reported on D105827 where a single shuffle of a constant (with multiple uses) was caught in an infinite loop where one shuffle (UNPCKL) used an undef arg but then that got recombined to SHUFPS as the constant value had its own undef that confused matching.....
Implement a subset of builtins required for compatiblilty with AIX XL compiler.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D105930
This adds new pseudoinstructions with ForceTailAgnostic set. This
matches what we did for non-widening VMACC. We should move to a
tail policy operand on the pseudos when we expand the intrinsic
interface to include the tail policy.
This patch transforms the sequence
lea (reg1, reg2), reg3
sub reg3, reg4
to two sub instructions
sub reg1, reg4
sub reg2, reg4
Similar optimization can also be applied to LEA/ADD sequence.
The modifications to TwoAddressInstructionPass is to ensure the operands of ADD
instruction has expected order (the dest register of LEA should be src register
of ADD).
Differential Revision: https://reviews.llvm.org/D104684
If the upper 32 bits are zero and bit 31 is set, we might be able to
use zext.w to fill in the zeros after using an lui and/or addi.
Most of this patch is plumbing the subtarget features into the constant
materialization.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D105509
This patch includes the following updates to the load/store refactoring effort introduced in D93370:
- Update various VSX patterns that use to "force" an XForm, to instead just XForm.
This allows the ability for the patterns to compute the most optimal addressing
mode (and to produce a DForm instruction when possible)
- Update pattern and test case for the LXVD2X/STXVD2X intrinsics
- Update LIT test cases that use to use the XForm instruction to use the DForm instruction
Differential Revision: https://reviews.llvm.org/D95115
This avoids relying on G_EXTRACT on unusual types, and also properly
decomposes structs into multiple registers. This also preserves the
LLTs in the memory operands.
Specifying the latencies of specific LDP variants appears to improve
performance almost universally.
Differential Revision: https://reviews.llvm.org/D105882
This patch adds support for following contiguous load and store
instructions:
* LD1B, LD1H, LD1W, LD1D, LD1Q
* ST1B, ST1H, ST1W, ST1D, ST1Q
A new register class and operand is added for the 32-bit vector select
register W12-W15. The differences in the following tests which have been
re-generated are caused by the introduction of this register class:
* llvm/test/CodeGen/AArch64/GlobalISel/irtranslator-inline-asm.ll
* llvm/test/CodeGen/AArch64/GlobalISel/regbank-inlineasm.mir
* llvm/test/CodeGen/AArch64/stp-opt-with-renaming-reserved-regs.mir
* llvm/test/CodeGen/AArch64/stp-opt-with-renaming.mir
D88663 attempts to resolve the issue with the store pair test
differences in the AArch64 load/store optimizer.
The GlobalISel differences are caused by changes in the enum values of
register classes, tests have been updated with the new values.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D105572
This patch teaches the compiler to identify a wider variety of
`BUILD_VECTOR`s which form integer arithmetic sequences, and to lower
them to `vid.v` with modifications for non-unit steps and non-zero
addends.
The sequences handled by this optimization must either be monotonically
increasing or decreasing. Consecutive elements holding the same value
indicate a fractional step which, while simple mathematically,
becomes more complex to handle both in the realm of lossy integer
division and in the presence of `undef`s.
For example, a common "interleaving" shuffle index will be lowered by
LLVM to both `<0,u,1,u,2,...>` and `<u,0,u,1,u,...>` `BUILD_VECTOR`
nodes. Either of these would ideally be lowered to `vid.v` shifted right
by 1. Detection of this sequence in presence of general `undef` values
is more complicated, however: `<0,u,u,1,>` could match either
`<0,0,0,1,>` or `<0,0,1,1,>` depending on later values in the sequence.
Both are possible, so backtracking or multiple passes is inevitable.
Sticking to monotonic sequences keeps the logic simpler as it can be
done in one pass. Fractional steps will likely be a separate
optimization in a future patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104921
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
Since we're still building on top of the MVT based infrastructure, we
need to track the pointer type/address space on the side so we can end
up with the correct pointer LLTs when interpreting CCValAssigns.
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch adds the builtins and instrisics for population
count, reversed load and store related operations.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D106021
The maskmovdqu instruction is an odd one: it has a 32-bit and a 64-bit
variant, the former using EDI, the latter RDI, but the use of the
register is implicit. In 64-bit mode, a 0x67 prefix can be used to get
the version using EDI, but there is no way to express this in
assembly in a single instruction, the only way is with an explicit
addr32.
This change adds support for the instruction. When generating assembly
text, that explicit addr32 will be added. When not generating assembly
text, it will be kept as a single instruction and will be emitted with
that 0x67 prefix. When parsing assembly text, it will be re-parsed as
ADDR32 followed by MASKMOVDQU64, which still results in the correct
bytes when converted to machine code.
The same applies to vmaskmovdqu as well.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103427
This patch makes vector spills valid for tail predication when all loads
from the same stack slot are within the loop
Differential Revision: https://reviews.llvm.org/D105443
This patch implements the `__popcntb` XL compatibility builtin for 32bit in the frontend and backend. This patch also updates tests for `__popcntb` and other XL Compat sync related builtins.
Reviewed By: #powerpc, nemanjai, amyk
Differential Revision: https://reviews.llvm.org/D105360
We have a DAG combine for recognizing the sequence of nodes that make up
an MVE VQDMULH, but only currently handles specifically legal types.
This patch expands that to other power-2 vector types. For smaller than
legal types this means any_extending the type and casting it to a legal
type, using a VQDMULH where we only use some of the lanes. The result is
sign extended back to the original type, to properly set the invalid
lanes. Larger than legal types are split into chunks with extracts and
concat back together.
Differential Revision: https://reviews.llvm.org/D105814
The underlying getMinVectorRegisterBitWidth() methods are const, but it was missed in a couple of TargetTransformInfo wrappers.
Noticed while working on D103925
This patch adds support for the following outer product instructions:
* BFMOPA, BFMOPS, FMOPA, FMOPS, SMOPA, SMOPS, SUMOPA, SUMOPS, UMOPA,
UMOPS, USMOPA, USMOPS.
Depends on D105570.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105571
This patch uses AtomicExpandPass to implement quadword lock free atomic operations. It adopts the method introduced in https://reviews.llvm.org/D47882, which expand atomic operations post RA to avoid spilling that might prevent LL/SC progress.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D103614
Replace the experimental clang builtins and LLVM intrinsics for these
instructions with normal codegen patterns. Resolves PR50435.
Differential Revision: https://reviews.llvm.org/D106019
Any def of EXEC prevents rematerialization of any VOP instruction
because of the physreg use. Create a callback to check if the
physreg use can be ingored to allow rematerialization.
Differential Revision: https://reviews.llvm.org/D105836
For i64 reductions we currently try and convert add(VMLALV(X, Y), B) to
VMLALVA(B, X, Y), incorporating the addition into the VMLALVA. If we
have an add of an existing VMLALVA, this patch pushes the add up above
the VMLALVA so that it may potentially be simplified further, for
example being folded into another VMLALV.
Differential Revision: https://reviews.llvm.org/D105686
This is mostly a minor convenience, but the pattern seems frequent
enough to be worthwhile (and we'll probably add more uses in the
future).
Differential Revision: https://reviews.llvm.org/D105850
Replace the experimental clang builtin and LLVM intrinsics for these
instructions with normal codegen patterns. Resolves PR50433.
Differential Revision: https://reviews.llvm.org/D105950
MVE does not have a VMLALV instruction that can perform v16i8 -> i64
reductions, like it does for v8i16->i64 and v4i32->i64 reductions. That
means that the pattern to create them will be spilt up by type
legalization, creating a lot of instructions.
This extends the patterns for matching i64 reductions a little to handle
the v16i8->i64 case. We need to turn them into a pair of v8i16->i64
VMLALVs that each perform half of the reduction and are summed together
(so the later is a VMLALVA). The order of the lanes does not matter for
the reduction so we generate a MVEEXT for the extension, that will
either be folded into a extending load or can be optimized to a
VREV/VMOVL. Some of the resulting codegen isn't optimal, but will be
improved in a later patch.
Differential Revision: https://reviews.llvm.org/D105680
At the moment, <vscale x 1 x eltty> are not yet fully handled by the
code-generator, so to avoid vectorizing loops with that VF, we mark the
cost for these types as invalid.
The reason for not adding a new "TTI::getMinimumScalableVF" is because
the type is supposed to be a type that can be legalized. It partially is,
although the support for these types need some more work.
Reviewed By: paulwalker-arm, dmgreen
Differential Revision: https://reviews.llvm.org/D103882
$ is used as PC for PowerPC inlineasm, ELF use it,
enable it for AIX XCOFF as well.
Reviewed By: #powerpc, amyk, nemanjai
Differential Revision: https://reviews.llvm.org/D105956
If we try to create a new GlobalVariable on each iteration, the Module will
detect the name collision and "helpfully" rename later iterations by appending
".1" etc. But "___udivsi3.1" doesn't exist and we definitely don't want to try
to call it.
So instead check whether there's already a global with the right name in the
module and use that if so.
We know that "CVTTPS2SI" returns 0x80000000 for out of range inputs (and for FP_TO_UINT, negative float values are undefined). We can use this to make unsigned conversions from vXf32 to vXi32 more efficient, particularly on targets without blend using the following logic:
small := CVTTPS2SI(x);
fp_to_ui(x) := small | (CVTTPS2SI(x - 2^31) & ARITHMETIC_RIGHT_SHIFT(small, 31))
Even on targets where "PBLENDVPS"/"PBLENDVB" exists, it is often a latency 2, low throughput instruction so this logic is applied there too (in particular for AVX2 also). It furthermore gets rid of one high latency floating point comparison in the previous lowering.
@TomHender checked the correctness of this for all possible floats between -1 and 2^32 (both ends excluded).
Original Patch by @TomHender (Tom Hender)
Differential Revision: https://reviews.llvm.org/D89697
This patch fixes code that incorrectly handled dbg.values with duplicate
location operands, i.e. !DIArgList(i32 %a, i32 %a). The errors in
question were caused by either applying an update to dbg.value multiple
times when the update is only valid once, or by updating the
DIExpression for only the first instance of a value that appears
multiple times.
Differential Revision: https://reviews.llvm.org/D105831
Using positive zero as the neutral element in 'fadd' reductions, while
it generates better code, is incorrect. The correct neutral element is
negative zero: 0.0 + -0.0 = 0.0, whereas -0.0 + -0.0 = -0.0.
There are perhaps more optimal lowerings of negative zero avoiding
constant-pool loads which could be left as future work.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D105902
If no scratch or flat instructions are used, we do not need to
initialize the flat scratch hardware register.
Differential Revision: https://reviews.llvm.org/D105920
SME introduces the ZA array, a new piece of architectural register state
consisting of a matrix of [SVLb x SVLb] bytes, where SVL is the
implementation defined Streaming SVE vector length and SVLb is the
number of 8-bit elements in a vector of SVL bits.
SME instructions consist of three types of matrix operands:
* Tiles: a ZA tile is a square, two-dimensional sub-array of elements
within the ZA array. These tiles make up the larger accumulator array
and the granularity varies based on the element size, i.e.
- ZAQ0..ZAQ15 (smallest tile granule)
- ZAD0..ZAD7
- ZAS0..ZAS3
- ZAH0..ZAH1
or ZAB0 (largest tile granule, single tile)
* Tile vectors: similar to regular tiles, but have an extra 'h' or 'v'
to tell how the vector at [reg+offset] is layed out in the tile,
horizontally or vertically. E.g. za1h.h or za15v.q, which corresponds
to vectors in registers ZAH1 and ZAQ15, respectively.
* Accumulator matrix: this is the entire accumulator array ZA.
This patch adds the register classes and related operands and parsing
for SME instructions operating on the accumulator array.
The ADDHA and ADDVA instructions which operate on tiles are also added
in this patch to make some use of the code added, later patches will
make use of the other operands introduced here.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Co-authored by: Sander de Smalen (@sdesmalen)
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105570
This patch aims to revert the changes introduced by D70781 D71192 D76364
D70781 was introduced to fix hardware hang where we do not insert exp-
null-done for a kill inside infinit loop. At that time we have not added
exp-null-done for kill early termination, but I believe as for now, we will
always add the exp-null-done for early termination case in LaterBranchLowering.
D71192 was introduced to handle the only_kill case, which is also been
handled by the kill early termination work.
D76364 was used to fix a regression by D71192, where we cleared the done
bit of the export in the existing program and not let the normal return
block branching to the new unified return block.
With this change, we just trust frontends have setup exp-done correctly
which is true for all existing frontends. The backend only inserts
exp-null-done for the kill cases which is handled in SILateBranchLowering.cpp.
Reviewed by: critson
Differential Revision: https://reviews.llvm.org/D105610
Allow
```
%x:_<2 x p0> = G_INTTOPTR %y:_<2 x s64>
```
This shows up when building clang for AArch64 with GlobalISel.
Also show that we can select it.
This should match SDAG's behaviour: https://godbolt.org/z/33oqYoaYv
Differential Revision: https://reviews.llvm.org/D105944
AMDGPU normally spills SGPRs to VGPRs. Previously, since all register
classes are handled at the same time, this was problematic. We don't
know ahead of time how many registers will be needed to be reserved to
handle the spilling. If no VGPRs were left for spilling, we would have
to try to spill to memory. If the spilled SGPRs were required for exec
mask manipulation, it is highly problematic because the lanes active
at the point of spill are not necessarily the same as at the restore
point.
Avoid this problem by fully allocating SGPRs in a separate regalloc
run from VGPRs. This way we know the exact number of VGPRs needed, and
can reserve them for a second run. This fixes the most serious
issues, but it is still possible using inline asm to make all VGPRs
unavailable. Start erroring in the case where we ever would require
memory for an SGPR spill.
This is implemented by giving each regalloc pass a callback which
reports if a register class should be handled or not. A few passes
need some small changes to deal with leftover virtual registers.
In the AMDGPU implementation, a new pass is introduced to take the
place of PrologEpilogInserter for SGPR spills emitted during the first
run.
One disadvantage of this is currently StackSlotColoring is no longer
used for SGPR spills. It would need to be run again, which will
require more work.
Error if the standard -regalloc option is used. Introduce new separate
-sgpr-regalloc and -vgpr-regalloc flags, so the two runs can be
controlled individually. PBQB is not currently supported, so this also
prevents using the unhandled allocator.
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch adds the builtins and instrisics for compare
and multiply related operations.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D102875
[NFC] This patch adds features for pwr7, pwr8, and pwr9 that can be
used for semachecking builtin functions that are only valid for certain
versions of ppc.
Reviewed By: nemanjai, #powerpc
Authored By: Quinn Pham <Quinn.Pham@ibm.com>
Differential revision: https://reviews.llvm.org/D105501
We don't really have optimizations for division with a constant
LHS. If we don't use a W instruction we end up needing to sign
or zero extend the RHS to use the 64-bit instruction.
I had to sign_extend i32 constants on the LHS instead of using
any_extend which becomes zero_extend. If we don't do this, constants
that were originally negative become harder to materialize. I think
this problem exists for more of our W instruction cases. For example
(i32 (shl -1, X)), but we don't have lit tests. I'll work on that
as a follow up.
I also left a FIXME for enabling W instruction for RHS constants
under -Oz.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D105769
This patch adds a function that checks whether or not the frame index
is aligned when the computed addressing mode is an aligned D-Form (DS, or DQ-Form).
If the frame index appears to be unaligned, within these two modes, reset
the mode to X-Form in order to fall back to selection X-Form loads.
A test case is added to ensure that the test emits X-Form loads and not DQ-Form
loads since the frame index is not aligned within the test case.
Differential Revision: https://reviews.llvm.org/D105661
Some microarchitectures treat rs1=x1/x5 on jalr as a hint to pop
the return-address stack. We should avoid using x5 on jalr
instructions since we aren't using x5 as an alternate link register.
Differential Revision: https://reviews.llvm.org/D105875
Similar to D46745, "S" represents an absolute symbolic operand, which
can be used to specify the access models, e.g.
extern int var;
void *addr_via_asm() {
void *ret;
asm("lui %0, %%hi(%1)\naddi %0,%0,%%lo(%1)" : "=r"(ret) : "S"(&var));
return ret;
}
'S' is documented in trunk GCC: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101275
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D105254
LDARX and LWARX sometimes gets optimized out by the compiler
when it is critical to the correctness of the code. This inline asm generation
ensures that it preserved.
Differential Revision: https://reviews.llvm.org/D105754
[NFC] This patch adds features for pwr7, pwr8, and pwr9 that can be
used for semachecking builtin functions that are only valid for certain
versions of ppc.
Reviewed By: nemanjai, #powerpc
Authored By: Quinn Pham <Quinn.Pham@ibm.com>
Differential revision: https://reviews.llvm.org/D105501
This makes them consistent with all the other return convention
handling. If we don't do this, we lose the sext/zext flag if treated
as a full assignment, which complicates a future GlobalISel patch.
This also fixes some missing implicit uses on call instructions, adds
missing G_ASSERT_SEXT/ZEXT annotations, and some missing outgoing
sext/zexts. This also fixes not respecting tablegen requested type
promotions.
This starts treating f64 passed in i32 GPRs as a type of custom
assignment, which restores some previously XFAILed tests. This is due
to getNumRegistersForCallingConv returns a static value, but in this
case it is context dependent on other arguments.
Most of the ugliness is reproducing a hack CC_MipsO32 uses in
SelectionDAG. CC_MipsO32 depends on a bunch of vectors populated from
the original IR argument types in MipsCCState. The way this ends up
working in GlobalISel is it only ends up inspecting the most recently
added vector element. I'm pretty sure there are cleaner ways to do
this, but this seemed easier than fixing up the current DAG
handling. This is another case where it would be easier of the
CCAssignFns were passed the original type instead of only the
pre-legalized ones.
There's still a lot of junk here that shouldn't be necessary. This
also likely breaks big endian handling, but it wasn't complete/tested
anyway since the IRTranslator gives up on big endian targets.
The number of registers used for passing f64 in some cases is context
dependent, and thus getNumRegistersForCallingConv is sometimes
inaccurate. For f64, it reports 1 but is sometimes split into 2 32-bit
registers.
For GlobalISel, the generic argument assignment code expects
getNumRegistersForCallingConv to return an accurate answer. Switch to
marking these arguments as custom so we can deal with this case as a
custom assignment rather.
This temporarily breaks a few globalisel tests which are fixed by a
future change to use more of the generic infrastructure.
Annoyingly, i686 cmpsd handling still fails to remove the unnecessary neg(and(x,1))
Reapplied rGe4aa6ad13216 with fix for intrinsic variants of the opcode which uses a vector return type
Currently, if target of s_branch instruction is in another section, it will fail with the error of undefined label. Although in this case, the label is not undefined but present in another section. This patch tries to handle this issue. So while handling fixup_si_sopp_br fixup in getRelocType, if the target label is undefined we issue an error as before. If it is defined, a new relocation type R_AMDGPU_REL16 is returned.
This issue has been reported in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100181 and https://bugs.llvm.org/show_bug.cgi?id=45887. Before https://reviews.llvm.org/D79943, we used to get an crash for this scenario. The crash is fixed now but the we still get an undefined label error. Jumps to other section can arise with hold/cold splitting.
A patch to handle the relocation in lld will follow shortly.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D105760
The loops are run exactly once per lane, so VGPRs do not need to be
saved. Use the SIOptimizeVGPRLiveRange pass to add phi nodes that take
undef when coming from the loop.
There is still a shortcoming:
Return values from a function call in the loop are copied because their
live range conflicts with the live range of arguments, even if arguments
are only IMPLICIT_DEF after the phi insertion.
Differential Revision: https://reviews.llvm.org/D105192
Often when lowering vector shuffles, we split the shuffle into two
LHS/RHS shuffles which are then blended together. To do so we split the
original indices into two, indexed into each respective vector. These
two index vectors are then separately lowered as BUILD_VECTORs.
This patch forwards on any undef indices to the BUILD_VECTOR, rather
than having the VECTOR_SHUFFLE lowering decide on an optimal concrete
index. The motiviation for ths change is so that we don't duplicate
optimization logic between the two lowering methods and let BUILD_VECTOR
do what it does best.
Propagating undef in this way allows us, for example, to generate
`vid.v` to produce the LHS indices of commonly-used interleave-type
shuffles. I have designs on further optimizing interleave-type and other
common shuffle patterns in the near future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104789
This is a pilot change to verify the logic. The rest will be
done in a same way, at least the rest of VOP1.
Differential Revision: https://reviews.llvm.org/D105742
Similar to D91921 (and D104515) this introduces two MVESEXT and MVEZEXT
nodes that larger-than-legal sext and zext are lowered to. These either
get optimized away or end up becoming a series of stack loads/store, in
order to perform the extending whilst keeping the order of the lanes
correct. They are generated from v8i16->v8i32, v16i8->v16i16 and
v16i8->v16i32 extends, potentially with a intermediate extend for the
larger v16i8->v16i32 extend. A number of combines have been added for
obvious cases that come up in tests, notably MVEEXT of shuffles. More
may be needed in the future, but this seems to cover most of the cases
that come up in the tests.
Differential Revision: https://reviews.llvm.org/D105090
An assertion of the following can occur because Altivec and VSX splats use a different operand number for the immediate:
```
int64_t llvm::MachineOperand::getImm() const: Assertion `isImm() && "Wrong MachineOperand accessor"' failed.
```
This patch updates PPCMIPeephole.cpp assign the correct splat immediate.
Differential Revision: https://reviews.llvm.org/D105790
Update (mainly) vXf32/vXf64 -> vXi8/vXi16 fptosi/fptoui costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
This change is a step towards implementing codegen for __builtin_clz().
Full support for CLZ with a regression test will follow shortly.
Differential Revision: https://reviews.llvm.org/D105560
The lowering for v2i64 is now guarded with hasDirectMove,
however, the current lowering can handle the pattern correctly,
only lowering it when there is efficient patterns and corresponding
instructions.
The original guard was added in D21135, and was for Legal action.
The code has evloved now, this guard is not necessary anymore.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D105596
Replace the clang builtin function and LLVM intrinsic for
f32x4.demote_zero_f64x2 with combines from normal SDNodes. Also add missing
combines for i32x4.trunc_sat_zero_f64x2_{s,u}, which share the same pattern.
Differential Revision: https://reviews.llvm.org/D105755
There are some calls to functions like `__alloca` that are missing
a regmask operand. Lack of a regmask operand means that all
registers that aren't mentioned by def operands are preserved.
__alloca only updates EAX and ESP and has def operands for
them so this is ok. Because there is no regmask the register
allocator won't spill the FP registers across the call. Assuming
we want to keep the FP stack untoched across these calls, we
need to handle this is in the FP stackifier.
We might want to add a proper regmask operand to the code that
creates these calls to indicate all registers are preserved, but we'd
still need this change to the FP stackifier to know to preserve the
FP stack for such a regmask.
The test is kind of long, but bugpoint wasn't able to reduce it
any further.
Fixes PR50782
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D105762
This patch implements trap and FP to and from double conversions. The builtins
generate code that mirror what is generated from the XL compiler. Intrinsics
are named conventionally with builtin_ppc, but are aliased to provide the same
builtin names as the XL compiler.
Differential Revision: https://reviews.llvm.org/D103668
First patch in a series adding MC layer support for the Arm Scalable
Matrix Extension.
This patch adds the following features:
sme, sme-i64, sme-f64
The sme-i64 and sme-f64 flags are for the optional I16I64 and F64F64
features.
If a target supports I16I64 then the following instructions are
implemented:
* 64-bit integer ADDHA and ADDVA variants (D105570).
* SMOPA, SMOPS, SUMOPA, SUMOPS, UMOPA, UMOPS, USMOPA, and USMOPS
instructions that accumulate 16-bit integer outer products into 64-bit
integer tiles.
If a target supports F64F64 then the FMOPA and FMOPS instructions that
accumulate double-precision floating-point outer products into
double-precision tiles are implemented.
Outer products are implemented in D105571.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D105569
Don't use a local MachineOperand copy in SystemZAsmPrinter::PrintAsmOperand()
and change the register as it may break the MRI tracking of register
uses. Use an MCOperand instead.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D105757
Update truncation costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
This sets the latency of stores to 1 in the Cortex-A55 scheduling model,
to better match the values given in the software optimization guide.
The latency of a store in normal llvm scheduling does not appear to have
a lot of uses. If the store has no outputs then the latency is somewhat
meaningless (and pre/post increment update operands use the WriteAdr
write for those operands instead). The one place it does alter things is
the latency between a store and the end of the scheduling region, which
can in turn have an effect on the critical path length. As a result a
latency of 1 is more correct and offers ever-so-slightly better
scheduling of instructions near the end of the block.
They are marked as RetireOOO to keep the llvm-mca from introducing
stalls where non would exist.
Differential Revision: https://reviews.llvm.org/D105541
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
The original motivation for this was to implement moreElementsVector of shuffles
on AArch64, which resulted in complex sequences of artifacts like unmerge(unmerge(concat...))
which the combiner couldn't handle. It seemed here that the better option,
instead of writing ever-more-complex combines, was to have a way to find
the original "non-artifact" source registers for a given definition, walking
through arbitrary expressions of unmerge/concat/insert. As long as the bits
aren't extended or truncated, this is a pretty simple algorithm that avoids
the need for lots of combines and instead jumps straight to the final result
we want.
I've only used this new technique in 2 places within tryCombineUnmerge, using it
in more general situations resulted in infinite loops in AMDGPU. So for now
it's used when we would otherwise fail to combine and that seems to work.
In order to support looking through G_INSERTs, I also had to add it as an
artifact in isArtifact(), which caused a whole lot of issues in tests. AMDGPU
started infinite looping since full legalization of G_INSERT doensn't seem to
be there. To work around this, I've temporarily added a CLI option to use the
old behaviour so that the MIR tests will still run and terminate.
Other minor changes include no longer making >128b G_MERGE/UNMERGE legal.
We never had isel support for that anyway and it was a remnant of the legacy
legalizer rules. However being legal prevented the combiner from checking if it
was dead and deleting them.
Differential Revision: https://reviews.llvm.org/D104355
Replace the clang builtin function and LLVM intrinsic previously used to select
the f64x2.promote_low_f32x4 instruction with custom combines from standard
SelectionDAG nodes. Implement the new combines to share code with the similar
combines for f64x2.convert_low_i32x4_{s,u}. Resolves PR50232.
Differential Revision: https://reviews.llvm.org/D105675
This to protect against non-sensical instruction sequences being assembled,
which would either cause asserts/crashes further down, or a Wasm module being output that doesn't validate.
Unlike a validator, this type checker is able to give type-errors as part of the parsing process, which makes the assembler much friendlier to be used by humans writing manual input.
Because the MC system is single pass (instructions aren't even stored in MC format, they are directly output) the type checker has to be single pass as well, which means that from now on .globaltype and .functype decls must come before their use. An extra pass is added to Codegen to collect information for this purpose, since AsmPrinter is normally single pass / streaming as well, and would otherwise generate this information on the fly.
A `-no-type-check` flag was added to llvm-mc (and any other tools that take asm input) that surpresses type errors, as a quick escape hatch for tests that were not intended to be type correct.
This is a first version of the type checker that ignores control flow, i.e. it checks that types are correct along the linear path, but not the branch path. This will still catch most errors. Branch checking could be added in the future.
Differential Revision: https://reviews.llvm.org/D104945
LLVM provides target hooks to recognise stack spill and restore
instructions, such as isLoadFromStackSlot, and it also provides post frame
elimination versions such as isLoadFromStackSlotPostFE. These are supposed
to return the store-source and load-destination registers; unfortunately on
X86, the PostFE recognisers just return "1", apparently to signify "yes
it's a spill/load". This patch alters the hooks to correctly return the
store-source and load-destination registers:
This is really useful for debug-info as we it helps follow variable values
as they move on/off the stack. There should be no codegen changes: the only
other users of these PostFE target hooks are MachineInstr::getRestoreSize
and MachineInstr::getSpillSize, which don't attempt to interpret the
returned register location.
While we're here, delete the (InstrRef) LiveDebugValues heuristic that
tries to find the spill source register by looking for a killed reg -- we
should be able to rely on the target hooks for that. This involves
temporarily turning off a n InstrRef LivedDebugValues test on aarch64
(patch to re-enable it is in D104521).
Differential Revision: https://reviews.llvm.org/D105428
Fails with:
```
/build/llvm-toolchain-snapshot-13~++20210709092633+88326bbce38c/llvm/lib/Target/M68k/GlSel/M68kCallLowering.cpp: In member function 'virtual bool llvm::M68kCallLowering::lowerReturn(llvm::MachineIRBuilder&, const llvm::Value*, llvm::ArrayRef<llvm::Register>, llvm::FunctionLoweringInfo&, llvm::Register) const':
/build/llvm-toolchain-snapshot-13~++20210709092633+88326bbce38c/llvm/lib/Target/M68k/GlSel/M68kCallLowering.cpp:71:42: error: no matching function for call to 'llvm::CallLowering::ArgInfo::ArgInfo(<brace-enclosed initializer list>)'
ArgInfo OrigArg{VRegs, Val->getType()};
```
Differential Revision: https://reviews.llvm.org/D105689
Summary:
The bit order of the has_vec and longtbtable bits in the traceback table generated by the XL compiler flipped at some point after v12.1. This is different from the definition is the AIX header debug.h. The change in the XL compiler that caused the deviation from the OS header definition was unintentional. Since both orderings are extant and the XL compiler runtime also expects the ordering defined by the OS, we will correct the output from LLVM to match the defined ordering given by the OS (which is also consistent with the Assembler Language Reference). Mitigation for traceback tables encoded with the wrong ordering is required for either ordering.
Reviewers: XingXue, HubertTong
Differential Revision: https://reviews.llvm.org/D105487
Its proving tricky to move this to the generic legalizer code, so manually insert the v2i32 subvector into v4i32, insert the AssertSext/AssertZext node, then extract the subvector again.
This avoids masks in the truncation/pack code, which means we avoid a PSHUFB in the fp_to_sint/uint code for sub-128 bit types (specific targets can still combine the packs to a pshufb if they have fast variable per-lane shuffles).
This was noticed when I was trying to improve fp_to_sint/uint costs with D103695 (and some targets had very high fp_to_sint costs due to the PSHUFB), so we can then update the fp_to_uint codegen from D89697.
This patch removes the IsPairwiseForm flag from the Reduction Cost TTI
hooks, along with some accompanying code for pattern matching reductions
from trees starting at extract elements. IsPairWise is now assumed to be
false, which was the predominant way that the value was used from both
the Loop and SLP vectorizers. Since the adjustments such as D93860, the
SLP vectorizer has not relied upon this distinction between paiwise and
non-pairwise reductions.
This also removes some code that was detecting reductions trees starting
from extract elements inside the costmodel. This case was
double-counting costs though, adding the individual costs on the
individual instruction _and_ the total cost of the reduction. Removing
it changes the costs in llvm/test/Analysis/CostModel/X86/reduction.ll to
not double count. The cost of reduction intrinsics is still tested
through the various tests in
llvm/test/Analysis/CostModel/X86/reduce-xyz.ll.
Differential Revision: https://reviews.llvm.org/D105484
When the instruction has imm form and fed by LI, we can remove the redundat LI instruction.
Below is an example:
```
renamable $x5 = LI8 2
renamable $x4 = exact SRD killed renamable $x4, killed renamable $r5, implicit $x5
```
will be converted to:
```
renamable $x5 = LI8 2
renamable $x4 = exact RLDICL killed renamable $x4, 62, 2, implicit killed $x5
```
But when we do this optimization, we forget to remove implicit killed $x5
This bug has caused a lnt case error. This patch is to fix above bug.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D85288
The rest of the SOP instructions implicitly set SCC and not
suitable for the rematerialization.
Differential Revision: https://reviews.llvm.org/D105670
This parameter controls how much space is reserved for incoming
values. There are always going to be 2 incoming values in this case.
While there remove the unused std::vector right below.
Found while looking at porting this code to RISCV.
Override the `shouldScalarizeBinop` target lowering hook using the same
implementation used in the x86 backend. This causes `extract_vector_elt`s of
vector binary ops to be scalarized if the scalarized version would be supported.
Differential Revision: https://reviews.llvm.org/D105646
Noticed while making a related change. This code was doing
something really peculiar: Creating an APInt by parsing a string.
And then creating a SmallVector with one element to create the
GEP.
Instead create the APInt from integers and directly pass the single
index to GetElementPtrInst::Create().
Revived D101297 in its original form + added some changes in X86
legalization cehcking for masked gathers.
This solution is the most stable and the most correct one. We have to
check the legality before trying to build the masked gather in SLP.
Without this check we have incorrect cost (for SLP) in case if the masked gather
is not legal/slower than the gather. And we're missing some
vectorization opportunities.
This can be fixed in the cost model, but in this case we need to add
special checks for the cost of GEPs for ScatterVectorize node, add
special check for small trees, etc., i.e. there are a lot of corner
cases here and there, which insrease code base and make it harder to
maintain the code.
> Can't we rely on cost model to deal with this? This can be profitable for futher vectorization, when we can start from such gather loads as seed.
The question from D101297. Actually, no, it can't. Actually, simple
gather may give us better result, especially after we started
vectorization of insertelements. Plus, like I said before, the cost for
non-legal masked gathers leads to missed vectorization opportunities.
Differential Revision: https://reviews.llvm.org/D105042
SelectionDAG's equivalents in ISD::InputArg/OutputArg track the
original argument index. Mips relies on this, and its currently
reinventing its own parallel CallLowering infrastructure which tracks
these indexes on the side. Add this to help move towards deleting the
custom mips handling.
This is a cleanup patch -- we're now able to support all flavours of
variable location in instruction referencing mode. This patch updates
various tests for debug instructions to be broader: numerous code paths
try to ignore debug isntructions, and they now have to ignore the
additional DBG_PHI and DBG_INSTR_REFs that we can generate.
A small amount of rework happens for LiveDebugVariables: as we don't need
to track live intervals through regalloc any more, we can get away with
unlinking debug instructions before regalloc, then re-inserting them after.
Note that this isn't (yet) true of DBG_VALUE_LISTs, they still have to go
through live interval tracking.
In SelectionDAG, add a helper lambda that emits half-formed DBG_INSTR_REFs
for arguments in instr-ref mode, DBG_VALUE otherwise. This is one of the
final locations where DBG_VALUEs are emitted for vreg arguments.
X86InstrInfo now un-sets the debug instr number on SUB instructions that
get mutated into CMP instructions. As the instruction no longer computes a
subtraction, we can't use it for variable locations.
Differential Revision: https://reviews.llvm.org/D88898
- In [D98783](https://reviews.llvm.org/D98783), an extra GlobalDCE pass
is inserted before the internalization pass to ensure a global
variable without users could be internalized even if there are dead
users. Instead of inserting a dedicated optimization pass, the
dead user checking, i.e. 'use_empty()', should be preceeded with
constant dead user removal to ensure an accurate result.
Differential Revision: https://reviews.llvm.org/D105590
Additionally, lower the floating point compare SVE intrinsics to
SETCC_MERGE_ZERO ISD nodes to avoid duplicating ISel patterns.
Differential Revision: https://reviews.llvm.org/D105486
WebAssembly's shift instructions implicitly masks the shift count, so optimize
out redundant explicit masks of the shift count. For vector shifts, this
currently only works if the mask is applied before splatting the shift count,
but this should be addressed in a future commit. Resolves PR49655.
Differential Revision: https://reviews.llvm.org/D105600
Lowering for scalar to vector would skip if current subtarget is big
endian and the scalar is larger or equal than 64 bits. However there's
some issue in implementation that SToVRHS may refer to SToVLHS's scalar
size if SToVLHS is present, which leads to some crash.o
Reviewed By: nemanjai, shchenz
Differential Revision: https://reviews.llvm.org/D105094
This commit also makes some slight changes to the scheduling model for AMDGPU to set the RetireOOO flag for all scheduling classes.
This flag is only used by llvm-mca and allows instructions to retire out of order.
See the differential link below for a deeper explanation of everything.
Differential Revision: https://reviews.llvm.org/D104730
This patch prevents GlobalISel from optimizing out redundant branch
instructions when compiling without optimizations.
The motivating example is code like the following common pattern in
Swift, where users expect to be able to set a breakpoint on the early
exit:
public func f(b: Bool) {
guard b else {
return // I would like to set a breakpoint here.
}
...
}
The patch modifies two places in GlobalISEL: The first one is in
IRTranslator.cpp where the removal of redundant branches is made
conditional on the optimization level. The second one is in
AArch64InstructionSelector.cpp where an -O0 *only* optimization is
being removed.
Disabling these optimizations increases code size at -O0 by
~8%. However, doing so improves debuggability, and debug builds are
the primary reason why developers compile without optimizations. We
thus concluded that this is the right trade-off.
rdar://79515454
Differential Revision: https://reviews.llvm.org/D105238
There are some patterns involving the permuted scalar to vector node
for which we don't have patterns without direct moves on little endian
subtargets. This causes selection errors. While we can of course add
the missing patterns, any additional effort to make this work is not
useful since there is no support for any CPU that can run in
little endian mode and does not support direct moves.
Match whats documented in the Intel AOM - almost all the conversion instructions requires BOTH ports (apart from the MMX cvtpi2ps/cvtpi2ps instructions which we already override) - this was being incorrectly modelled as EITHER port.
Now that we can use in-order models in llvm-mca, the atom model is a good "worst case scenario" analysis for x86.
Adding usage of VSSRC and VSFRC when adding the live in registers on AIX.
This matches the behaviour of the rest of PPC Subtargets.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D104396
Update costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
Update (mainly) vXi8/vXi16 -> vXf32/vXf64 sitofp/uitofp costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
We have several checks for both cl::opt and OptLevel over our
pass config, although these checks do not properly work if
default value of a cl::opt will be false. Create a helper to
use instead and properly handle it. NFC for now.
Differential Revision: https://reviews.llvm.org/D105517
The combine was disabled in 4e22c7265d as it caused failures in
the ppc64be-multistage (bootstrap) bot.
It turns out that the combine did not correctly update the MMO for
the high load which caused aliased stores to be reported as unaliased.
This patch fixes that problem and re-enables the combine.
There are cases where infer address spaces pass cannot yet
infer an address space in the opt pipeline and then in the
llc pipeline it runs too late for atomic expand pass to
benefit from a specific address space.
Move atomic expand pass past the infer address spaces.
Fixes: SWDEV-293410
Differential Revision: https://reviews.llvm.org/D105511
This applies to memory accesses to (compile-time) constant addresses
(such as memory-mapped registers). Currently when a misaligned access
to such an address is detected, a fatal error is reported. This change
will emit a remark, and the compilation will continue with a trap,
and "undef" (for loads) emitted.
This fixes https://llvm.org/PR50838.
Differential Revision: https://reviews.llvm.org/D50524
These are fp->int conversions using either RMM or dynamic rounding modes.
The lround and lrint opcodes have a return type of either i32 or
i64 depending on sizeof(long) in the frontend which should follow
xlen. llround/llrint should always return i64 so we'll need a libcall
for those on rv32.
The frontend will only emit the intrinsics if -fno-math-errno is in
effect otherwise a libcall will be emitted which will not use
these ISD opcodes.
gcc also does this optimization.
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D105206
The odd register of a (128 bit) register pair is accessed with the 'N' code
with an inline assembly operand.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D105502
This adds a DAG combine to detect sext/zext inputs and emit a
new ISD opcode. The extends will either be removed or replaced
with narrower extends.
Isel patterns are used to match add and widening mul to vwmacc
similar to the recently added vmacc patterns.
There's still some work to be to match vmulsu.
We should also rewrite splats that were extended as scalars and
then splatted.
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D104802
Provide a generic fallback that performs the fptosi to i32 types, then truncates to sub-i32 scalars.
These numbers can be tweaked for specific sse levels, but we should get the default handling in place first.
Benchmarking has shown that it is worthwhile to implement a variable length
memset of 0 with XC (exclusive or) like gcc does, instead of using a libcall.
This requires the use of the EXecute Relative Long (EXRL) instruction which
can now be done in a framework that can also be used with other target
instructions (not just XC).
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D103865
Provide a generic fallback that extends sub-i32 scalars before using the existing sitofp instructions.
These numbers can be tweaked for specific sse levels, but we should get the default handling in place first.
We get the extension for free for non-vector loads.
This patch adds a TTI function, isElementTypeLegalForScalableVector, to query
whether it is possible to vectorize a given element type. This is called by
isLegalToVectorizeInstTypesForScalable to reject scalable vectorization if
any of the instruction types in the loop are unsupported, e.g:
int foo(__int128_t* ptr, int N)
#pragma clang loop vectorize_width(4, scalable)
for (int i=0; i<N; ++i)
ptr[i] = ptr[i] + 42;
This example currently crashes if we attempt to vectorize since i128 is not a
supported type for scalable vectorization.
Reviewed By: sdesmalen, david-arm
Differential Revision: https://reviews.llvm.org/D102253
This avoids the use of the vector unit for copying from scalar to
vector. There is an extra ptrue instruction, but a predicate register
with the ptrue pattern populated is likely to be free in the context of
real code.
Tests were generated from a template to cover the axes mentioned at the
top of the test file.
Co-authored-by: Francesco Petrogalli <francesco.petrogalli@arm.com>
Differential Revision: https://reviews.llvm.org/D103170
Set informational fields in the .shader_functions table.
Also correct the documentation, .scratch_memory_size and .lds_size are
integers.
Differential Revision: https://reviews.llvm.org/D105116
This patch implaments the load and reserve and store conditional
builtins for the PowerPC target, in order to have feature parody with
xlC on AIX.
Differential revision: https://reviews.llvm.org/D105236
For the following case:
t8: i32 = or t7, t4
t10: i32 = ORRWrs t8, t8, TargetConstant:i32<73>
Current code wrongly returns (t8 >> shiftConstant) as the
UsefulBits of t8, which in fact is (t8 | (t8 >> shiftConstant)).
Reviewed by: sdesmalen, mdchen
Differential Revision: https://reviews.llvm.org/D102759
This patch adds a new ShuffleKind SK_Splice and then handle the cost in
getShuffleCost, as in experimental.vector.reverse.
Differential Revision: https://reviews.llvm.org/D104630
This patch fixes PR50823.
The shuffle mask should be twisted twice before gotten the correct one due to the difference between inner HOP and outer.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D104903
Improve codegen when lowering the common vector shuffle case from the
vectorizer (op1[last]:op2[0:last-1]). This patch only handles this
common case as it is difficult to handle this more generally when using
fixed length vectors, due to being unable to use the SVE ext instruction.
Differential Revision: https://reviews.llvm.org/D105289
Loads of <4 x i8> vectors were modeled as extremely expensive. And while we
don't have a load instruction that supports this, it isn't that expensive to
create a vector of i8 elements. The codegen for this was fixed/optimised in
D105110. This now tweaks the cost model and enables SLP vectorisation of my
motivating case loadi8.ll.
Differential Revision: https://reviews.llvm.org/D103629
Added support to check if architecture supports s_mulhi which is used as part of
the decision whether or not to use valu 24 bit mul (if the mulhi gets
transformed to a valu op anyway, then may as well use it).
This is an extension of the work in D97063
Differential Revision: https://reviews.llvm.org/D103321
Change-Id: I80b1323de640a52623d69ac005a97d06a5d42a14
FeatureBitset is 4 64-bit values in an array. It's better passed by
reference rather than copying it.
I may be adding FeatureBitset as an argument to another function
and noticed this while working on that.
This API is not compatible with opaque pointers, the method
accepting an explicit pointer element type should be used instead.
Thankfully there were few in-tree users. The BPF case still ends
up using the pointer element type for now and needs something like
D105407 to avoid doing so.
Same as other CreateLoad-style APIs, these need an explicit type
argument to support opaque pointers.
Differential Revision: https://reviews.llvm.org/D105395
This adds simple patterns for signed and unsigned saturating extract
narrow instructions. They combine a min/max/truncate into a single
instruction, providing that the immediates on the min/max are correct
for the saturation type. This is just handled in tablegen with some
extra patterns.
v2i64->v2i32 is not handled here as the min/max nodes are not legal,
making the lowering quite different.
Differential Revision: https://reviews.llvm.org/D103263
Allocate non-volatile registers in order to be compatible with ABI, regarding gpr_save.
Quoted from https://www.ibm.com/docs/en/ssw_aix_72/assembler/assembler_pdf.pdf page55,
> The preferred method of using GPRs is to use the volatile registers first. Next, use the nonvolatile registers
> in descending order, starting with GPR31.
This patch is based on @jsji 's initial draft.
Tested on test-suite and SPEC, found no degradation.
Reviewed By: jsji, ZarkoCA, xingxue
Differential Revision: https://reviews.llvm.org/D100167
The SLM model is inconsistent about where it kept its 'unsupported' schedule classes - better to keep them close to similar classes.
I'm not sure why some ymm classes are defined and others are unsupported though (but I haven't altered them) - the only SLM-like CPU supporting any ymm is KNL and that currently uses the HSW model.
Update v4i64 -> v4f32/v4f64 uitofp costs based on the worst case costs from the script in D103695.
Fixes a few regressions before we start adding AVX costs for legalized types.
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Differential Revision: https://reviews.llvm.org/D104797
Target-independent code only knows how to spill to the stack; instead,
use AArch64ISD::REINTERPRET_CAST.
Differential Revision: https://reviews.llvm.org/D104573
D104868 removed an (incorrect) fold for distributing BFI instructions in
a chain, combining them into a single instruction. BFIs like that are
hard to test, as the patterns are often destroyed before they become
BFIs. But it can come up in places, with chains of BFIs that can be
combined.
This patch adds a replacement, which reassociates BFI instructions with
non-overlapping insertion masks so that low bits are inserted first.
This can end up sorting the nodes so that adjacent inserts are next to
one another, allowing the existing folds to combine into a single BFI.
Differential Revision: https://reviews.llvm.org/D105096
Inserting into a smaller-than-legal scalable vector would result in an
internal compiler error. For example, inserting a <vscale x 4 x i8> into
a <vscale x 8 x i8> (both illegal vector types for SVE) would cause a
crash.
This crash was happening because there was no code to promote (legalise)
the result of an INSERT_SUBVECTOR node.
This patch implements PromoteIntRes_INSERT_SUBVECTOR, which legalises
the ISD node. This is currently done by going through memory. This is
necessary because of the requirement that the SubVec parameter of the
INSERT_SUBVECTOR node must be smaller than the Vec parameter, which
means that INSERT_SUBVECTOR cannot always have a legal result/operand
types.
Co-Authored-by: Joe Ellis <joe.ellis@arm.com>
Differential Revision: https://reviews.llvm.org/D102766
Building on rG2a1ef8784ad9a, adjust the SSE cost tables to use the legalized types based on the worst case costs from the script in D103695.
To account for different numbers of src/dst legalized type registers we must scale the cost by maximum of the src/dst, not just use src
Much like fixed-point to floating-point conversion, the converse can
also be transformed into a fixed-point VCVT. This patch transforms
multiplications of floating point numbers by 2^n into a VCVT_fix. The
exception is that a float to fixed conversion with 1 fractional bit
ends up being an FADD (FADD(x, x) emulates FMUL(x, 2)) rather than an FMUL so there is a special case for that. This patch also moves the code from https://reviews.llvm.org/D103903 into a separate function as fixed to float and float to fixed are very similar.
Differential Revision: https://reviews.llvm.org/D104793
Since gather lowering can now lower to nodes that may need expansion via
the vector legalizer, do MGATHER lowering via vector legalizer.
Additionally, as part of adding passthru support for fixed typed
gathers, fix passthru support for scalable types.
Depends on D104910
Differential Revision: https://reviews.llvm.org/D104217
Move the (SSE-only) generic, legalized type conversion matching after the specific,custom conversion cases, allowing us to properly provide cost overrides.
The next step will be to clean up some of the weird existing costs and then to enable AVX+ legalized costs, which will let us strip out a lot of the cost tables entries.
Very late in compilation, backends like X86 will perform optimisations like
this:
$cx = MOV16rm $rax, ...
->
$rcx = MOV64rm $rax, ...
Widening the load from 16 bits to 64 bits. SEeing how the lower 16 bits
remain the same, this doesn't affect execution. However, any debug
instruction reference to the defined operand now refers to a 64 bit value,
nto a 16 bit one, which might be unexpected. Elsewhere in codegen, there's
often this pattern:
CALL64pcrel32 @foo, implicit-def $rax
%0:gr64 = COPY $rax
%1:gr32 = COPY %0.sub_32bit
Where we want to refer to the definition of $eax by the call, but don't
want to refer the copies (they don't define values in the way
LiveDebugValues sees it). To solve this, add a subregister field to the
existing "substitutions" facility, so that we can describe a field within
a larger value definition. I would imagine that this would be used most
often when a value is widened, and we need to refer to the original,
narrower definition.
Differential Revision: https://reviews.llvm.org/D88891
This patch changes return type of tryCandidate from void to bool:
1. Methods in some targets already follow this convention.
2. This would help if some target wants to re-use generic code.
3. It looks more intuitive if these try-method returns the same type.
We may need to change return type of them from bool to some enum
further, to make it less confusing.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103951
This enables proper lowering of non-byte sized loads. We still aren't
faithfully preserving memory types everywhere, so the legality checks
still only consider the size.
Enable the emission of a GNU attributes section by reusing the code for
emitting the ARM build attributes section.
The GNU attributes follow the exact same section format as the ARM
BuildAttributes section, so this can be factored out and reused for GNU
attributes generally.
The immediate motivation for this is to emit a GNU attributes section for the
vector ABI on SystemZ (https://reviews.llvm.org/D105067).
Review: Logan Chien, Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D102894
This is to allow 64 bit constant rematerialization. If a constant
is split into two separate moves initializing sub0 and sub1 like
now RA cannot rematerizalize a 64 bit register.
This gives 10-20% uplift in a set of huge apps heavily using double
precession math.
Fixes: SWDEV-292645
Differential Revision: https://reviews.llvm.org/D104874
This prevents constant gep operands from being hoisted by the Constant
Hoisting pass, leaving them to CodegenPrepare which can usually do a
better job at splitting large offsets. This can, in general, improve
performance and decrease codesize, especially for v6m where many
constants have a high cost.
Differential Revision: https://reviews.llvm.org/D104877
Summary:
in the patch https://reviews.llvm.org/D103651 [AIX][XCOFF] generate eh_info when vector registers are saved according to the traceback table.
when generate eh_info, it switch to other section, when it done, it need to switch back to text section again.
Reviewers: Jason Liu
Differential Revision: https://reviews.llvm.org/105195
This demonstrates a possible fix for PR48760 - for compares with constants, canonicalize the SGT/UGT condition code to use SGE/UGE which should reduce the number of EFLAGs bits we need to read.
As discussed on PR48760, some EFLAG bits are treated independently which can require additional uops to merge together for certain CMOVcc/SETcc/etc. modes.
I've limited this to cases where the constant increment doesn't result in a larger encoding or additional i64 constant materializations.
Differential Revision: https://reviews.llvm.org/D101074
I believe this Changed flag should be initialized to false,
otherwise the if (!Changed) is always dead. This doesn't
manifest in a functional issue because the PHINode checks will
fail if nothing changed. They are identical to the earlier
checks that must have already failed to get into this else block.
While there remove an else after return to reduce indentation.
Differential Revision: https://reviews.llvm.org/D105159
Based off the worse case numbers generated by D103695, the AVX1/2/512 sitofp/uitofp/fptosi/fptoui costs were higher than necessary (based off instruction counts instead of actual throughput).
The SSE costs still need further fixes, but I hit an issue with the order in which SSE costs are checked - we need to check CUSTOM costs (with non-legal types) first, and then fallback to LEGALIZED types. I'm looking at this now, and this should let us start thinning out a lot of the duplicates in the costs tables.
Then we can finally start work on vXi64 / vXi16 / vXi8 / vXi1 integers, which should let us look at sub-128-bit vectorization (D103925).
Details: https://reviews.llvm.org/D96805 changed the GCNTTIImpl::getCFInstrCost to return 1 for the PHI nodes
for the TTI::TCK_CodeSize and TTI::TCK_SizeAndLatency. This is incorrect because the value moves that are the
result of the PHI lowering are inserted into the basic block predecessors - not into the block itself.
As a result of this change LoopRotate and LoopUnroll were broken because of the incorrect Loop header and loop
body size/cost estimation.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D105104
This is a followup patch on D103636 where
it seemed checking on amdgpu-calls and
amdgpu-stack-objects is unnecessary. Removing these
checks didn't regress any tests functionally.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D104513
Looking at PostDominatorTree::dominates, we can see that has the same
logic (with the addition of handling Phi nodes - which are not used as inputs in
this pass) as the helper function.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D105141
`ARMInstPrinter::printMveAddrModeQOperand()` was added in D62680, but
was never used. It looks like `printT2AddrModeImm8Operand<false>()` is
used instead.
Differential Revision: https://reviews.llvm.org/D105124
Update AMDGPU gfx90a memory model to make coarse grain memory allocations
consistent when fine grained system scope atomic acquire and release is
performed.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D105137
GlobalISel is relying on regular MachineMemOperands to track all of
the memory properties of accesses. Just the raw byte size is
insufficent to disambiguate all situations. For example, if we need to
split an unaligned extending load, we need to know the number of bits
in the original source value and can't infer it from the result
type. This is also a problem for extending vector loads.
This does decrease the maximum representable size from the full
uint64_t bytes to a maximum of 16-bits. No in tree testcases hit this,
other than places using UINT64_MAX for unknown sizes. This may be an
issue for G_MEMCPY and co., although they can just use unknown size
for large static sizes. This also has potential for backend abuse by
relying on the type when it really shouldn't be relevant after
selection.
This does not include the necessary MIR printer/parser changes to
represent this.
It seems it is possible for DAG combine to create a shl with an
i64 result type and an i32 shift amount. This is ok before type
legalization since the type don't need to match in SelectionDAG.
This results in type legalization calling LowerOperation to
legalize just the amount. We weren't expecting this so we
asserted for not finding a fixed vector shift.
To fix this, I've added a check for the fixed vector case and
returned SDValue() to get the default type legalizer. I've
factored all shifts together and added a fixed vector specific
handler to avoid repeating similar code for each in
LowerOperation.
The particular case I found was exposed by D104581, but the bad
shift is created after that patch triggers.
The r1 register should be cleared in prologue of ISR as it is used
as constant zero.
Reviewed By: dylanmckay
Differential Revision: https://reviews.llvm.org/D99467
This adds a small fold for extract (ARM_BUILD_VECTOR) to fold to the
original node. This can help simplify the resulting codegen in some
cases.
Differential Revision: https://reviews.llvm.org/D104860
Previously xscale was known to everything apart
from the ELF streamer so we would crash as soon
as you tried to output an object file.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D104776
Adds legalizer, register bank select, and instruction
select support for G_SBFX and G_UBFX. These opcodes generate
scalar or vector ALU bitfield extract instructions for
AMDGPU. The instructions allow both constant or register
values for the offset and width operands.
The 32-bit scalar version is expanded to a sequence that
combines the offset and width into a single register.
There are no 64-bit vgpr bitfield extract instructions, so the
operations are expanded to a sequence of instructions that
implement the operation. If the width is a constant,
then the 32-bit bitfield extract instructions are used.
Moved the AArch64 specific code for creating G_SBFX to
CombinerHelper.cpp so that it can be used by other targets.
Only bitfield extracts with constant offset and width values
are handled currently.
Differential Revision: https://reviews.llvm.org/D100149
This adds support for Armv9-A's Realm Management Extension, including
three new system registers - MFAR_EL3, GPCCR_EL3 and GPTBR_EL3 - and
four new TLBI instructions.
The reference for the Realm Management Extension can be found at: https://developer.arm.com/documentation/ddi0615/aa.
Based on patches by Victor Campos.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D104773
This adds another small fold for extract of a vdup, between a i32 and a
f32, converting to a BITCAST. This allows some extra folding to happen,
simplifying the resulting code.
Differential Revision: https://reviews.llvm.org/D104857
I thought this might help with another optimization I was
thinking about, but I don't think it will. So it just wastes
compile time calling computeKnownBits for no benefit.
This reverts commit 81b2f95971.
Don't allow vectors to split into GPRs for 'r' and other scalar
constraints. Prevents assertion in getCopyToPartsVector.
Makes PR50907 give a better error instead of crashing.
The MVETRUNC node truncates two wide vectors to a single vector with
narrower elements. This is usually lowered to a series of extract/insert
elements, going via GPR registers. This patch changes that to instead
use a pair of truncating stores and a stack reload. This cuts down the
number of instructions at the expense of some stack space.
Differential Revision: https://reviews.llvm.org/D104515
Currently, when encountering store(trunc(..)) where the trunc is double
a legal vector lenth in MVE, we spilt the node into two different stores
each performing half of the trunc from the wider type. This works well
for efficiently lowering wider than legal types, else the trunc becomes
a series of individual lane moves. Unfortunately this splitting is
currently one of the first combines attempted, so can happen before any
other combines which might be more preferable.
This patch instead introduces the concept of a MVETRUNC ISel node that
the trunk is initially lowered to, to keep it intact as a single item as
opposed to splitting it up. This allows us to push the store(trunc(..))
combine later, allowing other optimisations to potentially happen on the
trunc first. The store(trunc(..)) splitting can then be done later in
the legalisation period if needed, or else fall back to a buildvector as
before.
This can also be used in the future to lower to loads/stores, as opposed
to the more expensive lane extracts/inserts. Some extra combines are
added to keep all the existing tests happy.
Differential Revision: https://reviews.llvm.org/D91921
This ports the AArch64 SABD and USBD over to DAG Combine, where they can be
used by more backends (notably MVE in a follow-up patch). The matching code
has changed very little, just to handle legal operations and types
differently. It selects from (ABS (SUB (EXTEND a), (EXTEND b))), producing
a ubds/abdu which is zexted to the original type.
Differential Revision: https://reviews.llvm.org/D91937
If type legalization is going to insert a sign_extend for other users
of X and we can fold the sign_extend into ADDW/MULW/SUBW, it is
better to replace the ANY_EXTEND so we don't end up with a separate
ADD/MUL/SUB instruction for the users of the ANY_EXTEND.
I'm only handling setcc uses right now, but there are other
instructions that force sign_extends like ashr.
There are probably other *W instructions we could use in addition
to ADDW/SUBW/MULW.
My motivating case was a loop terminating compare and a phi use
as seen in the new test file.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D104581
When set opt-bisect-limit to some value that is less than ISel pass
in command line and CurBisectNum expired, "DAG to DAG" pass lower
its opt level to O0. However "processimpdefs" and "X86 FP Stackifier"
is not stopped due to the CurBisectNum expiration. So undefined fp0
is generated. This cause crash in the "X86 FP Stackifier" pass,
because Stackifier doesn't expect any undefined fp value.
Here is the scenario that cause compiler crash.
successors: %bb.26
liveins: $r14
ST_FPrr $st0, implicit-def $fpsw, implicit $fpcw
renamable $rdi = MOV64ri @.str.3.16422
renamable $rdx = LEA64r %stack.6, 1, $noreg, 0, $noreg
ADJCALLSTACKDOWN64 0, 0, 0, implicit-def $rsp, implicit-def dead
$eflags, implicit-def $ssp, implicit $rsp, implicit $ssp
dead $esi = MOV32r0 implicit-def dead $eflags, implicit-def $rsi
CALL64pcrel32 @foo, implicit $rsp, implicit $ssp, implicit $rdi,
implicit $rsi, implicit $rdx, implicit-def dead $fp0
renamable $xmm0 = MOVSDrm_alt %stack.10, 1, $noreg, 0, $noreg :: (load 8
from %stack.10)
ADJCALLSTACKUP64 0, 0, implicit-def $rsp, implicit-def dead $eflags,
implicit-def $ssp, implicit $rsp, implicit $ssp
renamable $fp2 = CHS_Fp80 killed undef renamable $fp0, implicit-def
$fpsw
JMP_1 %bb.26
The CALL64pcrel32 mark fp0 dead, so llvm free the stack slot for fp0
and the stack become empty. In the late instruction CHS_Fp80, it use
undefined register fp0, the original code assume there must be a stack
slot for the src register (fp0) without respecting it is undefined,
so llvm report error.
We have some discussion in https://reviews.llvm.org/D104440 and we
decide to fix it in fast ISel. The fix is to lower undefined fp value to
zero value, so that it release the burden of "X86 FP Stackifier" pass.
Thank Craig for the suggestion and the initial patch to fix it.
Differential Revision: https://reviews.llvm.org/D104678
Most tests passed with an extra argument to explicitly enable the pass.
One does not, deleted it as part of this change. I can't see why the codegen
would be different between default on and default off but switched on. It
can be retrieved from the project history.
This would be a revert, but git revert was not clean. Disabling the pass
and leaving it in tree is less likely to cause breakage elsewhere than
patching up the git revert conflicts on unfamiliar code. It'll be landed
without review, as @hsmhsm is believed unavailable at present.
Differential Revision: https://reviews.llvm.org/D104962
Add support for the .reloc directive along the lines of
other back-ends.
This fixes a regression after https://reviews.llvm.org/D104080
was merged, since that patch presupposed support for .reloc.
We don't need to have the compare output a value and then copy it
to FPSW for use by FNSTSW. Instead we can just have the compare
output Glue and glue the FNSTSW to it. InstrEmitter effectively
performed this optimization when emitting the Machine IR. Doing
it directly simplifies the codes and reduces the work in
InstrEmitter. There's no change in the machine IR at the end of
isel before and after this change.
To reflect that the size may be scalable, a TypeSize is returned
instead of an unsigned. In places where the result is used,
it currently relies on an implicit cast of TypeSize -> uint64_t,
which asserts that the type is not scalable.
This patch is NFC for fixed-width vectors.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104454
This custom lowers <4 x i8> vector loads using a 32-bit load, followed by 2
SSHLL instructions to extend it to e.g. a <4 x i32> vector. Before, it was
really inefficient and expensive to construct a <4 x i32> for this as 4 byte
loads and 4 moves were used. With this improvement SLP vectorisation might for
example become profitable, see D103629.
Differential Revision: https://reviews.llvm.org/D104782
On PowerPC, VSRpRC represents the pairs of even and odd VSX register,
and VRRC corresponds to higher 32 VSX registers. In some cases, extra
copies are produced when handling incoming VRRC arguments with VSRpRC.
This patch changes allocation order of VSRpRC to eliminate this kind of
copy.
Stack frame sizes may increase if allocating non-volatile registers, and
some other vector copies happen. They need fix in future changes.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D104855
For a bfi chain like:
a = bfi input, x, y
b = bfi a, x', y'
The previous code was RAUW'ing a with x, mutating the second 'b' bfi, and when
SelectionDAG's CSE code ended up deleting it unexpectedly, bad things happend.
There's no need to RAUW in this case because we can just return our newly
created replacement BFI node. It also looked incorrect because it didn't account
for other users of the 'a' bfi.
Since it seems that chains of more than 2 BFI nodes are hard/impossible to
produce without this combine kicking in at some point, I've removed that
functionality since it had no test coverage.
rdar://79095399
Differential Revision: https://reviews.llvm.org/D104868
This patch teaches the compiler to generate code to handle larger RVV
stack sizes and stack offsets which resolve an amount larger than 2047
vector registers in size.
The previous behaviour was asserting on such large values as it was only
able to materialize the constant by feeding it to the 12-bit immediate
of an `ADDI` instruction. The compiler can now materialize this amount
into a temporary register before continuing with the computation.
A test case for this scenario is included which also checks that the
temporary register used to materialize the amount doesn't require an
additional spill slot over what we're already reserving for RVV code.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D104727
Previously this instruction could be used only in assembler. This change
makes it available for compiler also. Scheduling information was copied
from FTST instruction, hopefully this can be a satisfactory approximation.
Differential Revision: https://reviews.llvm.org/D104853
Commit 0464586ac5 added a combine
for a 64-bit load feeding a bswap but the implementation is only
correct for little endian systems.
This fixes it for big endian systems.
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
When targeting CPUs that don't have LDBRX, we end up producing code that is
very inefficient and large for this common idiom. This patch just
optimizes it two 32-bit LWBRX instructions along with a merge.
This fixes https://bugs.llvm.org/show_bug.cgi?id=49610
Differential revision: https://reviews.llvm.org/D104836
PACI*SP have the advantage that they are in HINT space, meaning
they can be run successfully in hardware without PAuth support -
they will just behave as a NOP. However, PACI*SP are also implicit
landing pads (think of an extra BTI jc). Therefore, they allow
indirect jumps of all kinds into them, potentially inserting new
gadgets. This patch replaces PACI*SP by PACI* LR, SP when
compiling explicitly for hardware with full PAuth support. PACI*
is not in the HINT space, therefore it will fault when run in
hardware without PAuth support, but it is also not a landing pad,
making programs safer in newer HW.
Differential Revision: https://reviews.llvm.org/D101920
- Currently, the emitting of labels in the parsePrimaryExpr function is case independent. It just takes the identifier and emits it.
- However, for HLASM the emitting of labels is case independent. We are emitting them in the upper case only, to enforce case independency. So we need to ensure that at the time of parsing the label we are emitting the upper case (in `parseAsHLASMLabel`), but also, when we are processing a PC-relative relocatable expression, we need to ensure we emit it in upper case (in `parsePrimaryExpr`)
- To achieve this a new MCAsmInfo attribute has been introduced which corresponding targets can override if needed.
Reviewed By: abhina.sreeskantharajan, uweigand
Differential Revision: https://reviews.llvm.org/D104715
As a minor adjustment to the existing lowering of offset scatters, this
extends any smaller-than-legal vectors into full vectors using a zext,
so that the truncating scatters can be used. Due to the way MVE
legalizes the vectors this should be cheap in most situations, and will
prevent the vector from being scalarized.
Differential Revision: https://reviews.llvm.org/D103704
It looks like the fold introduced in 63f3383ece can cause crashes
if the type of the bitcasted value is not a valid vector element type,
like x86_mmx.
To resolve the crash, reject invalid vector element types. The way it is
done in the patch is a bit clunky. Perhaps there's a better way to
check?
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D104792
OR, XOR and AND entries are added to the cost table. An extra cost
is added when vector splitting occurs.
This is done to address the issue of a missed SLP vectorization
opportunity due to unreasonably high costs being attributed to the vector
Or reduction (see: https://bugs.llvm.org/show_bug.cgi?id=44593).
Differential Revision: https://reviews.llvm.org/D104538
select (cmpeq Cond0, Cond1), LHS, (select (cmpugt Cond0, Cond1), LHS, Y) --> (select (cmpuge Cond0, Cond1), LHS, Y)
etc,
We already perform this fold in DAGCombiner for MVT::i1 comparison results, but these can still appear after legalization (in x86 case with MVT::i8 results), where we need to be more careful about generating new comparison codes.
Pulled out of D101074 to help address the remaining regressions.
Differential Revision: https://reviews.llvm.org/D104707
This also adds new interfaces for the fixed- and scalable case:
* LLT::fixed_vector
* LLT::scalable_vector
The strategy for migrating to the new interfaces was as follows:
* If the new LLT is a (modified) clone of another LLT, taking the
same number of elements, then use LLT::vector(OtherTy.getElementCount())
or if the number of elements is halfed/doubled, it uses .divideCoefficientBy(2)
or operator*. That is because there is no reason to specifically restrict
the types to 'fixed_vector'.
* If the algorithm works on the number of elements (as unsigned), then
just use fixed_vector. This will need to be fixed up in the future when
modifying the algorithm to also work for scalable vectors, and will need
then need additional tests to confirm the behaviour works the same for
scalable vectors.
* If the test used the '/*Scalable=*/true` flag of LLT::vector, then
this is replaced by LLT::scalable_vector.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104451
This patch optimizes the code generation of vector-type SELECTs (LLVM
select instructions with scalar conditions) by custom-lowering to
VSELECTs (LLVM select instructions with vector conditions) by splatting
the condition to a vector. This avoids the default expansion path which
would either introduce control flow or fully scalarize.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104772
Add SReg_224, VReg_224, AReg_224, etc.
Link 224-bit types with v7i32/v7f32.
Link existing 192-bit types to newly added v3i64/v3f64/v6i32/v6f32.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D104622
v6m cores only have a limited number of registers available. Unrolling
can mean we spend more on stack spills and reloads than we save from the
unrolling. This patch adds an extra heuristic to put a limit on the
unroll count for loops with multiple live out values, as measured from
the LCSSA phi nodes.
Differential Revision: https://reviews.llvm.org/D104659
Don't use SCC iterators when we're only interested in reachability.
Use df_begin/df_end inline to find reachable nodes.
Differential Revision: https://reviews.llvm.org/D104704
This reverts commit ea011ec5ed.
This still causes some miscompiles, I'll follow up in the phabricator
review with a sample of that issue (which is part of the sample of
the previous issue).
These used to consistently be zeroed pre-gfx9, but gfx9 made the
situation complicated since now some still do and some don't. This
also manages to pick up a few cases that the pattern fails to optimize
away.
We handle some cases with instruction patterns, but some get
through. In particular this improves the integer cases.
We can do this optimization in the majority of cases, but we currently
don't have a way to do it. We do not track/model which instructions
have which behavior, the control bit to change the high bit behavior,
or making use of preserved bits at all. This is a bit fuzzy since we
don't know precisely how the source instruction will be lowered, but
that only really matters in one case (for fma_mixlo).
We do need to fixup some of these cases after selection, but the
pattern helps eliminate many of these zexts.
Summary:
generate eh_info when vector registers are saved according to the traceback table.
struct eh_info_t {
unsigned version; /* EH info version 0 */
#if defined(64BIT)
char _pad[4]; /* padding */
#endif
unsigned long lsda; /* Pointer to Language Specific Data Area */
unsigned long personality; /* Pointer to the personality routine */
};
the value of lsda and personality is zero when the number of vector registers saved is large zero and there is not personality of the function
Reviewers: Jason Liu
Differential Revision: https://reviews.llvm.org/D103651
This is a recommit that fixes unwanted STP generation by checking that
the base register has not been modified or used elsewhere.
Our initial motivating case was memcpy's with alignments > 16. The
loads/stores, to which small memcpy's expand, are kept together in
several places so that we get a sequence like this for a 64 bit copy:
LD w0
LD w1
ST w0
ST w1
The load/store optimiser can generate a LDP/STP w0, w1 from this because
the registers read/written are consecutive. In our case however, the
sequence is optimised during ISel, resulting in:
LD w0
ST w0
LD w0
ST w0
This instruction reordering allows reuse of registers. Since the registers
are no longer consecutive (i.e. they are the same), it inhibits LDP/STP
creation. The approach here is to perform renaming:
LD w0
ST w0
LD w1
ST w1
to enable the folding of the stores into a STP. We do not yet generate
the LDP due to a limitation in the renaming implementation, but plan to
look at that in a follow-up so that we fully support this case. While
this was initially motivated by certain memcpy's, this is a general
approach and thus is beneficial for other cases too, as can be seen
in some test changes.
Differential Revision: https://reviews.llvm.org/D103597
Since this method can apply to cmpxchg operations, make sure it's clear
what value we're actually retrieving. This will help ensure we don't
accidentally ignore the failure ordering of cmpxchg in the future.
We could potentially introduce a getOrdering() method on AtomicSDNode
that asserts the operation isn't cmpxchg, but not sure that's
worthwhile.
Differential Revision: https://reviews.llvm.org/D103338
`IMAGE_REL_ARM64_REL64/IMAGE_REL_AMD64_REL64` do not exist and `.quad a - .` is
currently not representable.
For instrumentation, `.quad a - .` is useful representing a cross-section
reference in a metadata section, to allow ELF medium/large code models. The COFF
limitation makes such generic instrumentations inconvenient. I plan to make a
PGO/coverage metadata section field relative in D104556.
Differential Revision: https://reviews.llvm.org/D104564
Conversion from a fixed-point number to a floating-point number is done by
multiplying the fixed-point number by 2^(-n) where n is the number of
fractional bits. Currently this is lowered to a vcvt
(integer to floating-point) then a vmul, but it can instead be lowered
directly to a vcvt (fixed-point to floating-point). This patch enables
such transformations as long as the multiplication factor is a power of 2.
Differential Revision: https://reviews.llvm.org/D103903
This pass aims to optimize VGPR live-range in a typical divergent if-else
control flow. For example:
def(a)
if(cond)
use(a)
... // A
else
use(a)
As AMDGPU access vgpr with respect to active-mask, we can mark `a` as
dead in region A. For details, please refer to the comments in
implementation file.
The pass is enabled by default, the frontend can disable it through
"-amdgpu-opt-vgpr-liverange=false".
Differential Revision: https://reviews.llvm.org/D102212
The main motivation behind pointer replacement of LDS use within non-kernel
functions is - to *avoid* subsequent LDS lowering pass from directly packing
LDS (assume large LDS) into a struct type which would otherwise cause allocating
huge memory for struct instance within every kernel.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D103225
If the outer add has an simm12 immediate operand we should prefer
it instead of materializing it in a register. This would guarantee
and extra instruction and temporary register. Since we don't check
one use on the shl or zext we might generate more instructions if
there is an additional user.
- Take the same principle as the conversion from f64 to i64 with extra
necessary pre- and post-processing. It helps to reduce that conversion
sequence by half compared to legacy one.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D104427
getFramePointerReg only depends on information in ARMSubtarget,
so move it in there so it can be accessed from more places.
Make use of ARMSubtarget::getFramePointerReg to remove duplicated code.
The main use of useR7AsFramePointer is getFramePointerReg, so inline it.
Differential Revision: https://reviews.llvm.org/D104476
We were not reporting isFNegFree for v2f32, although it is effectively
free after legalization. The generic combine was pulling fneg out of
the fma source operands, and the AMDGPU combine was doing the
opposite.
Previously we went directly to unknown state on VTYPE mismatch.
If we instead remember the partial match, we can use this to
still use X0, X0 vsetvli in successors if AVL and needed SEW/LMUL
ratio match.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D104069
Implemented the transformation of xor (llvm.amdgcn.class x, mask), -1 into
llvm.amdgcn.class(x, ~mask). Added LIT tests as well.
Differential Revision: https://reviews.llvm.org/D104049
The patch https://reviews.llvm.org/D101469 is intended to enable loop unrolling,
not interleaved access vectorization. The method bool enableInterleavedAccessVectorization()
should not be implemented.
The instruction can be 16-bit aligned while targeting 32-bit aligned
code. To calculate the target address correctly, the address of the
instruction has to be adjusted.
Differential Revision: https://reviews.llvm.org/D104446
The target specific expression handling was slightly regressed by
bbea64250f. This restores the proper
sub-expression evaluation to allow for constant folding within the
expression. We explicitly discard the layout and assembler when
evaluating the expression to avoid any symbolic computation and instead
using the `evaluateAsRelocatable` to canonicalise and constant fold
only.
We can also simplify the expression handling - none of the target
variants support symbolic difference. This simplifies the logic for
that and adds additional tests to ensure that we do not accidentally
regress here in the future.
Reviewed By: maskray
Differential Revision: https://reviews.llvm.org/D104473
This fixes a GISEL vs SDAG regression that showed up at -Os in 256.bzip2
In `_getAndMoveToFrontDecode`:
gisel:
```
and w9, w0, #0xff
orr w9, w9, w8, lsl #8
```
sdag:
```
bfi w0, w8, #8, #24
```
Differential revision: https://reviews.llvm.org/D103291
This re-architects the RISCV relocation handling to bring the
implementation closer in line with the implementation in binutils. We
would previously aggressively resolve the relocation. With this
restructuring, we always will emit a paired relocation for any symbolic
difference of the type of S±T[±C] where S and T are labels and C is a
constant.
GAS has a special target hook controlled by `RELOC_EXPANSION_POSSIBLE`
which indicates that a fixup may be expanded into multiple relocations.
This is used by the RISCV backend to always emit a paired relocation -
either ADD[WIDTH] + SUB[WIDTH] for text relocations or SET[WIDTH] +
SUB[WIDTH] for a debug info relocation. Irrespective of whether linker
relaxation support is enabled, symbolic difference is always emitted as
a paired relocation.
This change also sinks the target specific behaviour down into the
target specific area rather than exposing it to the shared relocation
handling. In the process, we also sink the "special" handling for debug
information down into the RISCV target. Although this improves the path
for the other targets, this is not necessarily entirely ideal either.
The changes in the debug info emission could be done through another
type of hook as this functionality would be required by any other target
which wishes to do linker relaxation. However, as there are no other
targets in LLVM which currently do this, this is a reasonable thing to
do until such time as the code needs to be shared.
Improve the handling of the relocation (and add a reduced test case from
the Linux kernel) to ensure that we handle complex expressions for
symbolic difference. This ensures that we correct relocate symbols with
the adddends normalized and associated with the addition portion of the
paired relocation.
This change also addresses some review comments from Alex Bradbury about
the relocations meant for use in the DWARF CFA being named incorrectly
(using ADD6 instead of SET6) in the original change which introduced the
relocation type.
This resolves the issues with the symbolic difference emission
sufficiently to enable building the Linux kernel with clang+IAS+lld
(without linker relaxation).
Resolves PR50153, PR50156!
Fixes: ClangBuiltLinux/linux#1023, ClangBuiltLinux/linux#1143
Reviewed By: nickdesaulniers, maskray
Differential Revision: https://reviews.llvm.org/D103539
Jon Roelofs