The exisiting code goes out of its way to put block parameters into an
alloca only at -O0, and then describes the funciton argument with a
dbg.declare, which is undocumented in the LLVM-CFE contract and does
not actually behave as intended after LLVM r642022.
This patch just generates the alloca unconditionally, the mem2reg pass
will eliminate it at -O1 and up anyway and points the dbg.declare to
the alloca as intended (which mem2reg will then correctly rewrite into
a dbg.value).
rdar://problem/35043980
Differential Revision: https://reviews.llvm.org/D39305
llvm-svn: 316684
Summary:
Convert clang::LangAS to a strongly typed enum
Currently both clang AST address spaces and target specific address spaces
are represented as unsigned which can lead to subtle errors if the wrong
type is passed. It is especially confusing in the CodeGen files as it is
not possible to see what kind of address space should be passed to a
function without looking at the implementation.
I originally made this change for our LLVM fork for the CHERI architecture
where we make extensive use of address spaces to differentiate between
capabilities and pointers. When merging the upstream changes I usually
run into some test failures or runtime crashes because the wrong kind of
address space is passed to a function. By converting the LangAS enum to a
C++11 we can catch these errors at compile time. Additionally, it is now
obvious from the function signature which kind of address space it expects.
I found the following errors while writing this patch:
- ItaniumRecordLayoutBuilder::LayoutField was passing a clang AST address
space to TargetInfo::getPointer{Width,Align}()
- TypePrinter::printAttributedAfter() prints the numeric value of the
clang AST address space instead of the target address space.
However, this code is not used so I kept the current behaviour
- initializeForBlockHeader() in CGBlocks.cpp was passing
LangAS::opencl_generic to TargetInfo::getPointer{Width,Align}()
- CodeGenFunction::EmitBlockLiteral() was passing a AST address space to
TargetInfo::getPointerWidth()
- CGOpenMPRuntimeNVPTX::translateParameter() passed a target address space
to Qualifiers::addAddressSpace()
- CGOpenMPRuntimeNVPTX::getParameterAddress() was using
llvm::Type::getPointerTo() with a AST address space
- clang_getAddressSpace() returns either a LangAS or a target address
space. As this is exposed to C I have kept the current behaviour and
added a comment stating that it is probably not correct.
Other than this the patch should not cause any functional changes.
Reviewers: yaxunl, pcc, bader
Reviewed By: yaxunl, bader
Subscribers: jlebar, jholewinski, nhaehnle, Anastasia, cfe-commits
Differential Revision: https://reviews.llvm.org/D38816
llvm-svn: 315871
In OpenCL the kernel function and non-kernel function has different calling conventions.
For certain targets they have different argument ABIs. Also kernels have special function
attributes and metadata for runtime to launch them.
The blocks passed to enqueue_kernel is supposed to be executed as kernels. As such,
the block invoke function should be emitted as kernel with proper calling convention and
argument ABI.
This patch emits enqueued block as kernel. If a block is both called directly and passed
to enqueue_kernel, separate functions will be generated.
Differential Revision: https://reviews.llvm.org/D38134
llvm-svn: 315804
Besides obvious code simplification, avoiding explicit creation
of LValueBaseInfo objects makes it easier to make TBAA
information to be part of such objects.
This is part of D38126 reworked to be a separate patch to
simplify review.
Differential Revision: https://reviews.llvm.org/D38695
llvm-svn: 315289
Currently block is translated to a structure equivalent to
struct Block {
void *isa;
int flags;
int reserved;
void *invoke;
void *descriptor;
};
Except invoke, which is the pointer to the block invoke function,
all other fields are useless for OpenCL, which clutter the IR and
also waste memory since the block struct is passed to the block
invoke function as argument.
On the other hand, the size and alignment of the block struct is
not stored in the struct, which causes difficulty to implement
__enqueue_kernel as library function, since the library function
needs to know the size and alignment of the argument which needs
to be passed to the kernel.
This patch removes the useless fields from the block struct and adds
size and align fields. The equivalent block struct will become
struct Block {
int size;
int align;
generic void *invoke;
/* custom fields */
};
It also changes the pointer to the invoke function to be
a generic pointer since the address space of a function
may not be private on certain targets.
Differential Revision: https://reviews.llvm.org/D37822
llvm-svn: 314932
body of global block invoke functions.
This commit fixes an infinite loop in IRGen that occurs when compiling
the following code:
void FUNC2() {
static void (^const block1)(int) = ^(int a){
if (a--)
block1(a);
};
}
This is how IRGen gets stuck in the infinite loop:
1. GenerateBlockFunction is called to emit the body of "block1".
2. GetAddrOfGlobalBlock is called to get the address of "block1". The
function calls getAddrOfGlobalBlockIfEmitted to check whether the
global block has been emitted. If it hasn't been emitted, it then
tries to emit the body of the block function by calling
GenerateBlockFunction, which goes back to step 1.
This commit prevents the inifinite loop by building the global block in
GenerateBlockFunction before emitting the body of the block function.
rdar://problem/34541684
Differential Revision: https://reviews.llvm.org/D38118
llvm-svn: 314029
the interface.
The ultimate goal here is to make it easier to do some more interesting
things in constant emission, like emit constant initializers that have
ignorable side-effects, or doing the majority of an initialization
in-place and then patching up the last few things with calls. But for
now this is mostly just a refactoring.
llvm-svn: 310964
Certain targets (e.g. amdgcn) require global variable to stay in global or constant address
space. In C or C++ global variables are emitted in the default (generic) address space.
This patch introduces virtual functions TargetCodeGenInfo::getGlobalVarAddressSpace
and TargetInfo::getConstantAddressSpace to handle this in a general approach.
It only affects IR generated for amdgcn target.
Differential Revision: https://reviews.llvm.org/D33842
llvm-svn: 307470
Summary:
If the first parameter of the function is the ImplicitParamDecl, codegen
automatically marks it as an implicit argument with `this` or `self`
pointer. Added internal kind of the ImplicitParamDecl to separate
'this', 'self', 'vtt' and other implicit parameters from other kind of
parameters.
Reviewers: rjmccall, aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D33735
llvm-svn: 305075
The functions creating LValues propagated information about alignment
source. Extend the propagated data to also include information about
possible unrestricted aliasing. A new class LValueBaseInfo will
contain both AlignmentSource and MayAlias info.
This patch should not introduce any functional changes.
Differential Revision: https://reviews.llvm.org/D33284
llvm-svn: 303358
Use variadic templates instead of relying on <cstdarg> + sentinel.
This enforces better type checking and makes code more readable.
Differential revision: https://reviews.llvm.org/D32550
llvm-svn: 302572
blocks.
r302270 made changes to avoid emitting clang.arc.use at -O0 and instead
emit @objc_release. We also have to emit @objc_retain for the captured
variable at -O0 to match the @objc_release instead of just storing the
pointer to the capture field.
llvm-svn: 302495
The clang.arc.use intrinsic is removed via the ARC Contract Pass. This
pass is only executed in optimized builds (>= opt level 1). Prevent the
optimization implemented in SVN r301667 from triggering at optimization
level 0 like every other ARC use intrinsic usage.
llvm-svn: 302270
creation that are const-qualified.
When a block captures an ObjC object pointer, clang retains the pointer
to prevent prematurely destroying the object the pointer points to
before the block is called or copied.
When the captured object pointer is const-qualified, we can avoid
emitting the retain/release pair since the pointer variable cannot be
modified in the scope in which the block literal is introduced.
For example:
void test(const id x) {
callee(^{ (void)x; });
}
This patch implements that optimization.
rdar://problem/28894510
Differential Revision: https://reviews.llvm.org/D32601
llvm-svn: 301667
block copy/destroy routines
This is a preparation commit for work on merging unique block copy/destroy
helper functions.
rdar://22950898
Differential Revision: https://reviews.llvm.org/D30345
llvm-svn: 297023
block or lambda.
This is a follow-up to r281682, which fixed a bug in computeBlockInfo
where the captured VarDecl's type, rather than the captured field type
of the enclosing lambda or block, was used to compute the layout of a
block.
This commit makes similar changes to enterBlockScope. This is necessary
to correctly determine whether a block capture requires cleanup.
rdar://problem/30388124
llvm-svn: 295034
Modify ObjC blocks impl wrt address spaces as follows:
- keep default private address space for blocks generated
as local variables (with captures);
- add global address space for global block literals (no captures);
- make the block invoke function and enqueue_kernel prototype with
the generic AS block pointer parameter to accommodate both
private and global AS cases from above;
- add block handling into default AS because it's implemented as
a special pointer type (BlockPointer) in the frontend and therefore
it is used as a pointer everywhere. This is also needed to accommodate
both private and global AS blocks for the two cases above.
- removes ObjC RT specific symbols (NSConcreteStackBlock and
NSConcreteGlobalBlock) in the OpenCL mode.
Review: https://reviews.llvm.org/D28814
llvm-svn: 293286
This is a recommit of r290149, which was reverted in r290169 due to msan
failures. msan was failing because we were calling
`isMostDerivedAnUnsizedArray` on an invalid designator, which caused us
to read uninitialized memory. To fix this, the logic of the caller of
said function was simplified, and we now have a `!Invalid` assert in
`isMostDerivedAnUnsizedArray`, so we can catch this particular bug more
easily in the future.
Fingers crossed that this patch sticks this time. :)
Original commit message:
This patch does three things:
- Gives us the alloc_size attribute in clang, which lets us infer the
number of bytes handed back to us by malloc/realloc/calloc/any user
functions that act in a similar manner.
- Teaches our constexpr evaluator that evaluating some `const` variables
is OK sometimes. This is why we have a change in
test/SemaCXX/constant-expression-cxx11.cpp and other seemingly
unrelated tests. Richard Smith okay'ed this idea some time ago in
person.
- Uniques some Blocks in CodeGen, which was reviewed separately at
D26410. Lack of uniquing only really shows up as a problem when
combined with our new eagerness in the face of const.
llvm-svn: 290297
This commit fails MSan when running test/CodeGen/object-size.c in
a confusing way. After some discussion with George, it isn't really
clear what is going on here. We can make the MSan failure go away by
testing for the invalid bit, but *why* things are invalid isn't clear.
And yet, other code in the surrounding area is doing precisely this and
testing for invalid.
George is going to take a closer look at this to better understand the
nature of the failure and recommit it, for now backing it out to clean
up MSan builds.
llvm-svn: 290169
This patch does three things:
- Gives us the alloc_size attribute in clang, which lets us infer the
number of bytes handed back to us by malloc/realloc/calloc/any user
functions that act in a similar manner.
- Teaches our constexpr evaluator that evaluating some `const` variables
is OK sometimes. This is why we have a change in
test/SemaCXX/constant-expression-cxx11.cpp and other seemingly
unrelated tests. Richard Smith okay'ed this idea some time ago in
person.
- Uniques some Blocks in CodeGen, which was reviewed separately at
D26410. Lack of uniquing only really shows up as a problem when
combined with our new eagerness in the face of const.
Differential Revision: https://reviews.llvm.org/D14274
llvm-svn: 290149
Looks like CurFn's name outlives FunctionName, so we can just pass
StringRefs around rather than going from a StringRef to a std::string
to a const char* to a StringRef.
llvm-svn: 285873
abstract information about the callee. NFC.
The goal here is to make it easier to recognize indirect calls and
trigger additional logic in certain cases. That logic will come in
a later patch; in the meantime, I felt that this was a significant
improvement to the code.
llvm-svn: 285258
field in the enclosing lambda or block.
This patch fixes a bug in code-gen where it uses the type of the
declared variable rather than the type of the capture of the enclosing
lambda or block for the block capture. For example, in the following
function, code-gen currently uses i32* for the block capture "a" because
"a" is passed to foo1 as a reference, but it should use i32 since the
enclosing lambda captures "a" by value.
void foo1(int &a) {
auto lambda = [a]{
auto block1 = ^{
i = a;
};
block1();
};
lambda();
}
rdar://problem/18586386
Differential Revision: https://reviews.llvm.org/D21104
llvm-svn: 281682
The assertion added earlier was overly strict. We need to strip the pointer
casts (as when constructing the GV). Correct the types (Function or Variable).
llvm-svn: 271750
This extends the blocks support to support blocks with a dynamically linked
blocks runtime. The previous code generation would work only for static builds
of the blocks runtime. Mark the block "isa" pointers and functions as dllimport
if no explicit declaration marked with __declspec(dllexport) is found. This
additional check allows for the use of the functionality in the runtime library
if desired.
llvm-svn: 271138
This fixes a crash that occurs when a block captures a reference that is
captured by its enclosing lambda.
rdar://problem/18586651
Differential Revision: http://reviews.llvm.org/D19536
llvm-svn: 268532
It isn't necessary to call hasDefaultArg because we can't rematerialize
a captured variable that is a function parameter, regardless of whether
or not it has a default argument. NFC.
llvm-svn: 268318
parameters in the body of a block.
This fixes a bug where clang would materialize the default argument
inside the body of a block instead of passing the value via the block
descriptor.
For example, in the code below, foo1 would always print 42 regardless
of the value of argument "a" passed to foo1.
void foo1(const int a = 42 ) {
auto block = ^{
printf("%d\n", a);
};
block();
}
rdar://problem/24449235
llvm-svn: 268314
Constructors and destructors may be represented by several functions
in IR. Only base structors correspond to source code, others are
small pieces of code and eventually call the base variant. In this
case instrumentation of non-base structors has little sense, this
fix remove it. Now profile data of a declaration corresponds to
exactly one function in IR, it agrees with the current logic of the
profile data loading.
This change fixes PR24996.
Differential Revision: http://reviews.llvm.org/D15158
llvm-svn: 254876
driving a canonical difference between that and an unqualified
type is a really bad idea when both are valid. Instead, remember
that it was there in a non-canonical way, then look for that in
the one place we really care about it: block captures. The net
effect closely resembles the behavior of a decl attribute, except
still closely following ARC's standard qualifier parsing rules.
llvm-svn: 253534
Previously, __weak was silently accepted and ignored in MRC mode.
That makes this a potentially source-breaking change that we have to
roll out cautiously. Accordingly, for the time being, actual support
for __weak references in MRC is experimental, and the compiler will
reject attempts to actually form such references. The intent is to
eventually enable the feature by default in all non-GC modes.
(It is, of course, incompatible with ObjC GC's interpretation of
__weak.)
If you like, you can enable this feature with
-Xclang -fobjc-weak
but like any -Xclang option, this option may be removed at any point,
e.g. if/when it is eventually enabled by default.
This patch also enables the use of the ARC __unsafe_unretained qualifier
in MRC. Unlike __weak, this is being enabled immediately. Since
variables are essentially __unsafe_unretained by default in MRC,
the only practical uses are (1) communication and (2) changing the
default behavior of by-value block capture.
As an implementation matter, this means that the ObjC ownership
qualifiers may appear in any ObjC language mode, and so this patch
removes a number of checks for getLangOpts().ObjCAutoRefCount
that were guarding the processing of these qualifiers. I don't
expect this to be a significant drain on performance; it may even
be faster to just check for these qualifiers directly on a type
(since it's probably in a register anyway) than to do N dependent
loads to grab the LangOptions.
rdar://9674298
llvm-svn: 251041
Summary: It breaks the build for the ASTMatchers
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D13893
llvm-svn: 250827
CGBlocks.cpp.
This commit fixes a bug in clang's code-gen where it creates the
following functions but doesn't attach function attributes to them:
__copy_helper_block_
__destroy_helper_block_
__Block_byref_object_copy_
__Block_byref_object_dispose_
rdar://problem/20828324
Differential Revision: http://reviews.llvm.org/D13525
llvm-svn: 249735
Introduce an Address type to bundle a pointer value with an
alignment. Introduce APIs on CGBuilderTy to work with Address
values. Change core APIs on CGF/CGM to traffic in Address where
appropriate. Require alignments to be non-zero. Update a ton
of code to compute and propagate alignment information.
As part of this, I've promoted CGBuiltin's EmitPointerWithAlignment
helper function to CGF and made use of it in a number of places in
the expression emitter.
The end result is that we should now be significantly more correct
when performing operations on objects that are locally known to
be under-aligned. Since alignment is not reliably tracked in the
type system, there are inherent limits to this, but at least we
are no longer confused by standard operations like derived-to-base
conversions and array-to-pointer decay. I've also fixed a large
number of bugs where we were applying the complete-object alignment
to a pointer instead of the non-virtual alignment, although most of
these were hidden by the very conservative approach we took with
member alignment.
Also, because IRGen now reliably asserts on zero alignments, we
should no longer be subject to an absurd but frustrating recurring
bug where an incomplete type would report a zero alignment and then
we'd naively do a alignmentAtOffset on it and emit code using an
alignment equal to the largest power-of-two factor of the offset.
We should also now be emitting much more aggressive alignment
attributes in the presence of over-alignment. In particular,
field access now uses alignmentAtOffset instead of min.
Several times in this patch, I had to change the existing
code-generation pattern in order to more effectively use
the Address APIs. For the most part, this seems to be a strict
improvement, like doing pointer arithmetic with GEPs instead of
ptrtoint. That said, I've tried very hard to not change semantics,
but it is likely that I've failed in a few places, for which I
apologize.
ABIArgInfo now always carries the assumed alignment of indirect and
indirect byval arguments. In order to cut down on what was already
a dauntingly large patch, I changed the code to never set align
attributes in the IR on non-byval indirect arguments. That is,
we still generate code which assumes that indirect arguments have
the given alignment, but we don't express this information to the
backend except where it's semantically required (i.e. on byvals).
This is likely a minor regression for those targets that did provide
this information, but it'll be trivial to add it back in a later
patch.
I partially punted on applying this work to CGBuiltin. Please
do not add more uses of the CreateDefaultAligned{Load,Store}
APIs; they will be going away eventually.
llvm-svn: 246985
Make the copy/move ctors protected and defaulted in the base, make the
derived classes final to avoid exposing any slicing-prone APIs.
Also, while I'm here, simplify the use of buildByrefHelpers by taking
the parameter by value instead of non-const ref. None of the callers
care aobut observing the state after the call.
llvm-svn: 244990
The patch is generated using this command:
$ tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
work/llvm/tools/clang
To reduce churn, not touching namespaces spanning less than 10 lines.
llvm-svn: 240270
The RegionCounter type does a lot of legwork, but most of it is only
meaningful within the implementation of CodeGenPGO. The uses elsewhere
in CodeGen generally just want to increment or read counters, so do
that directly.
llvm-svn: 235664
distinction between the different use-cases. With the previous default
behavior we would occasionally emit empty debug locations in situations
where they actually were strictly required (= on invoke insns).
We now have a choice between defaulting to an empty location or an
artificial location.
Specifically, this fixes a bug caused by a missing debug location when
emitting C++ EH cleanup blocks from within an artificial function, such as
an ObjC destroy helper function.
rdar://problem/19670595
llvm-svn: 228003
Several pieces of code were relying on implicit debug location setting
which usually lead to incorrect line information anyway. So I've fixed
those (in r225955 and r225845) separately which should pave the way for
this commit to be cleanly reapplied.
The reason these implicit dependencies resulted in crashes with this
patch is that the debug location would no longer implicitly leak from
one place to another, but be set back to invalid. Once a call with
no/invalid location was emitted, if that call was ever inlined it could
produce invalid debugloc chains and assert during LLVM's codegen.
There may be further cases of such bugs in this patch - they're hard to
flush out with regression testing, so I'll keep an eye out for reports
and investigate/fix them ASAP if they come up.
Original commit message:
Reapply "DebugInfo: Generalize debug info location handling"
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225956
This was previously piggybacking on whatever happened to be the last
location set on CGDebugInfo/DIBuilder, which was wrong (it was often the
current location, such as the 'fn()' call site, not the end of the
block). With my improvements to set/unset the location in a scoped
manner (r225000) this went from a bad quality situation, to a crash.
Fixing this goes part-way to unblocking the recommit of r225000.
It's likely that any call to CodeGenFunction::StartFunction without the
CurEHLocation set represents a similar bug or risk of a bug. Perhaps
there are some callers that know they won't generate EH cleanups, but
I'm not sure.
I considered a generic catch-fix in StartFunction (just fallback to the
GlobalDecl's location) but that seemed like it'd mask bugs where the EH
location shouldn't be the same as the decl's location (& indeed by not
using that stop-gap I found this bug). We'll see how long I can hold out
on the generic catch-all. I might eventually be able to add an assertion
in.
llvm-svn: 225845
This reverts commit r225000, r225021, r225083, r225086, r225090.
The root change (r225000) still has several issues where it's caused
calls to be emitted without debug locations. This causes assertion
failures if/when those calls are inlined.
I'll work up some test cases and fixes before recommitting this.
llvm-svn: 225555
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225000
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224941
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224385
The logic for lowering profiling counters has been moved to an LLVM
pass. Emit the intrinsics rather than duplicating the whole pass in
clang.
llvm-svn: 223683
Richard rejected my Sema change to interpret an integer literal zero in
a varargs context as a null pointer, so -Wsentinel sees an integer
literal zero and fires off a warning. Only CodeGen currently knows that
it promotes integer literal zeroes in this context to pointer size on
Windows. I didn't want to teach -Wsentinel about that compatibility
hack. Therefore, I'm migrating to C++11 nullptr.
llvm-svn: 223079
When emitting nested block definitions, the insert-at-point variant of
DIBuilder::insertDeclare() could be called with the insertion point set
to the end-of-BasicBlock sentinel, causing the parent pointer of the
CallInst to be set to the intentionally bogus value of the sentinel.
Fixed by conditionally invoking the correct version of insertDeclare().
rdar://problem/19034882
llvm-svn: 222487
Add driver and frontend support for the GCC -Wframe-larger-than=bytes warning.
This is the first GCC-compatible backend diagnostic built around LLVM's
reporting feature.
This commit adds infrastructure to perform reverse lookup from mangled names
emitted after LLVM IR generation. We use that to resolve precise locations and
originating AST functions, lambdas or block declarations to produce seamless
codegen-guided diagnostics.
An associated change, StringMap now maintains unique mangled name strings
instead of allocating copies. This is a net memory saving in C++ and a small
hit for C where we no longer reuse IdentifierInfo storage, pending further
optimisation.
llvm-svn: 210293
The only remaining user didn't actually use the non-dynamic storage facility
this class provides.
The std::string is transitional and likely to be StringRefized shortly.
llvm-svn: 210058
ensure that querying the first declaration for its most recent declaration
checks for redeclarations from the imported module.
This works as follows:
* The 'most recent' pointer on a canonical declaration grows a pointer to the
external AST source and a generation number (space- and time-optimized for
the case where there is no external source).
* Each time the 'most recent' pointer is queried, if it has an external source,
we check whether it's up to date, and update it if not.
* The ancillary data stored on the canonical declaration is allocated lazily
to avoid filling it in for declarations that end up being non-canonical.
We'll still perform a redundant (ASTContext) allocation if someone asks for
the most recent declaration from a decl before setPreviousDecl is called,
but such cases are probably all bugs, and are now easy to find.
Some finessing is still in order here -- in particular, we use a very general
mechanism for handling the DefinitionData pointer on CXXRecordData, and a more
targeted approach would be more compact.
Also, the MayHaveOutOfDateDef mechanism should now be expunged, since it was
addressing only a corner of the full problem space here. That's not covered
by this patch.
Early performance benchmarks show that this makes no measurable difference to
Clang performance without modules enabled (and fixes a major correctness issue
with modules enabled). I'll revert if a full performance comparison shows any
problems.
llvm-svn: 209046
are not associated with any source lines.
Previously, if the Location of a Decl was empty, EmitFunctionStart would
just keep using CurLoc, which would sometimes be correct (e.g., thunks)
but in other cases would just point to a hilariously random location.
This patch fixes this by completely eliminating all uses of CurLoc from
EmitFunctionStart and rather have clients explicitly pass in a
SourceLocation for the function header and the function body.
rdar://problem/14985269
llvm-svn: 205999
In instrumentation-based profiling, we need a set of data structures to
represent the counters. Previously, these were built up during static
initialization. Now, they're shoved into a specially-named section so
that they show up as an array.
As a consequence of the reorganizing symbols, instrumentation data
structures for linkonce functions are now correctly coalesced.
This is the first step in a larger project to minimize runtime overhead
and dependencies in instrumentation-based profilng. The larger picture
includes removing all initialization overhead and making the dependency
on libc optional.
<rdar://problem/15943240>
llvm-svn: 204080
This fixes PR15768, where the sret parameter and the 'this' parameter
are in the wrong order.
Instance methods compiled by MSVC never return records in registers,
they always return indirectly through an sret pointer. That sret
pointer always comes after the 'this' parameter, for both __cdecl and
__thiscall methods.
Unfortunately, the same is true for other calling conventions, so we'll
have to change the overall approach here relatively soon.
Reviewers: rsmith
Differential Revision: http://llvm-reviews.chandlerc.com/D2664
llvm-svn: 200587
A return type is the declared or deduced part of the function type specified in
the declaration.
A result type is the (potentially adjusted) type of the value of an expression
that calls the function.
Rule of thumb:
* Declarations have return types and parameters.
* Expressions have result types and arguments.
llvm-svn: 200082
CodeGenFunction is run on only one function - a new object is made for
each new function. I would add an assertion/flag to this effect, but
there's an exception: ObjC properties involve emitting helper functions
that are all emitted by the same CodeGenFunction object, so such a check
is not possible/correct.
llvm-svn: 189277
inspired by CodegenFunction::LexicalScope.
- NoLocation temporarily turns off debug locations altogether.
This is useful for emitting instructions that should be
counted towards the function prologue.
- BuiltinLocation temporarily switches to an artificial debug location
that has a valid scope, but no line information. This is useful when
emitting compiler-generated helper functions that have no source
location associated with them.
llvm-svn: 186552
a lambda.
Bug #1 is that CGF's CurFuncDecl was "stuck" at lambda invocation
functions. Fix that by generally improving getNonClosureContext
to look through lambdas and captured statements but only report
code contexts, which is generally what's wanted. Audit uses of
CurFuncDecl and getNonClosureAncestor for correctness.
Bug #2 is that lambdas weren't specially mapping 'self' when inside
an ObjC method. Fix that by removing the requirement for that
and using the normal EmitDeclRefLValue path in LoadObjCSelf.
rdar://13800041
llvm-svn: 181000
http://lab.llvm.org:8011/builders/clang-x86_64-darwin10-gdb went back green
before it processed the reverted 178663, so it could not have been the culprit.
Revert "Revert 178663."
This reverts commit 4f8a3eb2ce5d4ba422483439e20c8cbb4d953a41.
llvm-svn: 178682
For variables and functions clang used to store two storage classes. The one
"as written" in the code and a patched one, which, for example, propagates
static to the following decls.
This apparently is from the days clang lacked linkage computation. It is now
redundant and this patch removes it.
llvm-svn: 178663
* Store the .block_descriptor (instead of self) in the alloca so we
can guarantee that all captured variables are available at -O0.
* Add the missing OpDeref for the alloca.
rdar://problem/12767564
llvm-svn: 178361
calls and declarations.
LLVM has a default CC determined by the target triple. This is
not always the actual default CC for the ABI we've been asked to
target, and so we sometimes find ourselves annotating all user
functions with an explicit calling convention. Since these
calling conventions usually agree for the simple set of argument
types passed to most runtime functions, using the LLVM-default CC
in principle has no effect. However, the LLVM optimizer goes
into histrionics if it sees this kind of formal CC mismatch,
since it has no concept of CC compatibility. Therefore, if this
module happens to define the "runtime" function, or got LTO'ed
with such a definition, we can miscompile; so it's quite
important to get this right.
Defining runtime functions locally is quite common in embedded
applications.
llvm-svn: 176286
We were previously hard-coding a particular field index. This was
fine before (because we were obviously guaranteed the presence
of a copy/dispose member) except for (1) alignment padding and
(2) future extensions adding extra members to the header, such
as the extended-layout pointer.
Note that we only introduce the extended-layout pointer in the
presence of structs. (We also seem to be introducing it even
in the presence of an all-non-object layout, but that's a
different potential issue.)
llvm-svn: 173122
__strong __block variables, perform objc_storeStrong on
source and destination instead of direct move. This
is done with -O0 and to improve some analysis.
// rdar://12530881
llvm-svn: 171555
The line information was changed when emitting debug information for all the
DeclRefExprs and we should change it back to get ready for PopClenupBlocks
called from FinishFunction.
rdar://11562117
llvm-svn: 171493
We were emitting calls to blocks as if all arguments were
required --- i.e. with signature (A,B,C,D,...) rather than
(A,B,...). This patch fixes that and accounts for the
implicit block-context argument as a required argument.
In addition, this patch changes the function type under which
we call unprototyped functions on platforms like x86-64 that
guarantee compatibility of variadic functions with unprototyped
function types; previously we would always call such functions
under the LLVM type T (...)*, but now we will call them under
the type T (A,B,C,D,...)*. This last change should have no
material effect except for making the type conventions more
explicit; it was a side-effect of the most convenient implementation.
llvm-svn: 169588
uncovered.
This required manually correcting all of the incorrect main-module
headers I could find, and running the new llvm/utils/sort_includes.py
script over the files.
I also manually added quite a few missing headers that were uncovered by
shuffling the order or moving headers up to be main-module-headers.
llvm-svn: 169237
in deciding a copy/dispose field is needed in a byref structure
and when generating the copy/dispose helpers. In certain
cases, these fields were being added but no copy/dispose was
being generated. This was uncovered in ARC, but not in MRR.
// rdar://12759433
llvm-svn: 168825
Separate out the notions of 'has a trivial special member' and 'has a
non-trivial special member', and use them appropriately. These are not
opposites of one another (there might be no special member, or in C++11 there
might be a trivial one and a non-trivial one). The CXXRecordDecl predicates
continue to produce incorrect results, but do so in fewer cases now, and
they document the cases where they might be wrong.
No functionality changes are intended here (they will come when the predicates
start producing the right answers...).
llvm-svn: 168119
generation for captured block variables in arc mode. This includes
inlined version of the meta-data when it can be done. It also includes
severat tests. This is wip. // rdar://12184410.
llvm-svn: 167241
combination of a load+objc_release; this is generally better
for tools that try to track why values are retained and
released. Also use objc_storeStrong when copying a block
(again, only at -O0), which requires us to do a preliminary
store of null in order to compensate for objc_storeStrong's
assign semantics.
llvm-svn: 166085
if (CGM.getModuleDebugInfo())
DebugInfo = CGM.getModuleDebugInfo()
into a call:
maybeInitializeDebugInfo();
This is a simplification for a possible future fix of PR13942.
llvm-svn: 166019
in the ABI arrangement, and leave a hook behind so that we can easily
tweak CCs on platforms that use different CCs by default for C++
instance methods.
llvm-svn: 159894
literal helper functions. All helper functions (global
and locals) use block_invoke as their prefix. Local literal
helper names are prefixed by their enclosing mangled function
names. Blocks in non-local initializers (e.g. a global variable
or a C++11 field) are prefixed by their mangled variable name.
The descriminator number added to end of the name starts off
with blank (for first block) and _<N> (for the N+2-th block).
llvm-svn: 159206
It reduces the amount of emitted debug information:
1) DIEs in .debug_info have types DW_TAG_compile_unit, DW_TAG_subprogram,
DW_TAG_inlined_subroutine (for opt builds) and DW_TAG_lexical_block only.
2) .debug_str contains only function names.
3) No debug data for types/namespaces/variables is emitted.
4) The data in .debug_line is enough to produce valid stack traces with
function names and line numbers.
Reviewed by Eric Christopher.
llvm-svn: 156160
more aligned than the block header but also contains something
smaller than the block-header alignment but not exactly half
the difference between the large alignment and the header
alignment. Got that?
I'm really not sure what I was thinking with the buggy computation
here, but the fix is pretty obvious.
llvm-svn: 155662
jump into these scopes, and the cleanup-entering code sometimes wants
to do some operations first (e.g. a GEP), which can leave us with
unparented IR.
llvm-svn: 154684
Adrian Prantl