Legalize to a libcall.
On this occasion, also start allowing soft float subtargets. For the
moment G_FREM is the only legal floating point operation for them.
llvm-svn: 299753
In LowerMUL, the chain information is not preserved for the new
created Load SDNode.
For example, if a Store alias with one of the operand of Mul.
The Load for that operand need to be scheduled before the Store.
The dependence is recorded in the chain of Store, in TokenFactor.
However, when lowering MUL, the SDNodes for the new Loads for
VMULL are not updated in the TokenFactor for the Store. Thus the
chain is not preserved for the lowered VMULL.
llvm-svn: 299701
Summary:
Host CPU detection now supports Kryo, so we need to recognize it in ARM
target.
Reviewers: mcrosier, t.p.northover, rengolin, echristo, srhines
Reviewed By: t.p.northover, echristo
Subscribers: aemerson
Differential Revision: https://reviews.llvm.org/D31775
llvm-svn: 299674
During the optimisation of jump tables in the constant island pass,
an extra ADD could be left over, now dead but not removed.
Differential Revision: https://reviews.llvm.org/D31389
llvm-svn: 299634
This is a generic combine enabled via target hook to reduce icmp logic as discussed in:
https://bugs.llvm.org/show_bug.cgi?id=32401
It's likely that other targets will want to enable this hook for scalar transforms,
and there are probably other patterns that can use bitwise logic to reduce comparisons.
Note that we are missing an IR canonicalization for these patterns, and we will probably
prefer the pair-of-compares form in IR (shorter, more likely to fold).
Differential Revision: https://reviews.llvm.org/D31483
llvm-svn: 299542
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
Dont emit Mapping symbols for sections that contain only data.
Summary:
Dont emit mapping symbols for sections that contain only data.
Reviewers: rengolin, weimingz, kparzysz, t.p.northover, peter.smith
Reviewed By: t.p.northover
Patched by Shankar Easwaran <shankare@codeaurora.org>
Subscribers: alekseyshl, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D30724
llvm-svn: 299392
- we are now using immediate AsmOperands so that the range check functions are
tablegen'ed.
- Big bonus is that error messages become much more accurate, i.e. instead of a
useless "invalid operand" error message it will not say that the immediate
operand must in range [x,y], which is why regression tests needed updating.
More tablegen operand descriptions could probably benefit from using
immediateAsmOperand, but this is a first good step to get rid of most of the
nearly identical range check functions. I will address the remaining immediate
operands in next clean ups.
Differential Revision: https://reviews.llvm.org/D31333
llvm-svn: 299358
Follow up to D25691, this sets up the plumbing necessary to support vector demanded elements support in known bits calculations in target nodes.
Differential Revision: https://reviews.llvm.org/D31249
llvm-svn: 299201
This patch enables schedulers to specify instructions that
cannot be issued with any other instructions.
It also fixes BeginGroup/EndGroup.
Reviewed by: Andrew Trick
Differential Revision: https://reviews.llvm.org/D30744
llvm-svn: 298885
Summary:
The true and false operands for the CMOV are operands 0 and 1.
ARMISelLowering.cpp::computeKnownBits was looking at operands 1 and 2
instead. This can cause CMOV instructions to be incorrectly folded into
BFI if value set by the CMOV is another CMOV, whose known bits are
computed incorrectly.
This patch fixes the issue and adds a test case.
Reviewers: kristof.beyls, jmolloy
Subscribers: llvm-commits, aemerson, srhines, rengolin
Differential Revision: https://reviews.llvm.org/D31265
llvm-svn: 298624
including the amended (no UB anymore) fix for adding/subtracting -2147483648.
This reverts r298328 "[ARM] Revert r297443 and r297820."
and partially reverts r297842 "Revert "[Thumb1] Fix the bug when adding/subtracting -2147483648""
llvm-svn: 298417
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Summary:
To support negative immediates for certain arithmetic instructions, the
instruction is converted to the inverse instruction with a negated (or inverted)
immediate. For example, "ADD r0, r1, #FFFFFFFF" cannot be encoded as an ADD
instruction. However, "SUB r0, r1, #1" is equivalent.
These conversions are different from instruction aliases. An alias maps
several assembler instructions onto one encoding. A conversion, however, maps
an *invalid* instruction--e.g. with an immediate that cannot be represented in
the encoding--to a different (but equivalent) instruction.
Several instructions with negative immediates were being converted already, but
this was not systematically tested, nor did it cover all instructions.
This patch implements all possible substitutions for ARM, Thumb1 and
Thumb2 assembler and adds tests. It also adds a feature flag
(-mattr=+no-neg-immediates) to turn these substitutions off. This is
helpful for users who want their code to assemble to exactly what they
wrote.
Reviewers: t.p.northover, rovka, samparker, javed.absar, peter.smith, rengolin
Reviewed By: javed.absar
Subscribers: aadg, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D30571
llvm-svn: 298380
The glueless lowering of addc/adde in Thumb1 has known serious
miscompiles (see https://reviews.llvm.org/D31081), and r297820
causes an infinite loop for certain constructs. It's not
clear when they will be fixed, so let's just take them out
of the tree for now.
(I resolved a small conflict with r297453.)
llvm-svn: 298328
The special case of zero sized values was previously not handled correctly.
This patch handles this by not promoting if the size is zero.
Patch by Tim Neumann.
Differential Revision: https://reviews.llvm.org/D31116
llvm-svn: 298320
This commit adds a parameter that lets us pass in the calling convention
of the call to CallLowering::lowerCall. This allows us to handle
situations where the calling convetion of the callee is different from
that of the caller.
Differential Revision: https://reviews.llvm.org/D31039
llvm-svn: 298254
Let targets specialize the pass with the register class so we can get a
parameterless default constructor and can put the pass into the pass
registry to enable testing with -run-pass=.
llvm-svn: 298184
Fixing triple format in the tests added for the branch label fix for Thumb
Targets. Also recommitting previously approved patch, see
https://reviews.llvm.org/D30943.
Reviewed by: samparker
Differential Revision: https://reviews.llvm.org/D30987
llvm-svn: 298056
This allows the optimization to rearrange loads and stores more
aggressively. This doesn't really affect performance, but it helps
codesize.
Differential Revision: https://reviews.llvm.org/D30839
llvm-svn: 298021
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
llvm-svn: 298010
In fact this default implementation should be the only implementation,
keep it virtual for now to accomodate targets that don't model flags
correctly.
Differential Revision: https://reviews.llvm.org/D30747
llvm-svn: 297980
If we got unlucky with register allocation and actual constpool placement, we
could end up producing a tTBB_JT with an index that's already been clobbered.
Technically, we might be able to fix this situation up with a MOV, but I think
the constant islands pass is complex enough without having to deal with more
weird edge-cases.
llvm-svn: 297871
Different MCInstrAnalysis classes for arm and thumb mode, each with
their own evaluateBranch implementation. I added a test case and
fixed the coff-relocations test to use '<label>:' rather than
'<label>' in the CHECK-LABEL entries, since the ones without the
colon would match branch targets. Might be worth noticing that
llvm-objdump does not lookup the relocation and thus assigns it a
target depending on the encoded immediate which #0, so it thinks it
branches to the next instruction.
Committed on behalf of Andre Vieira (avieira).
Differential Revision: https://reviews.llvm.org/D30943
llvm-svn: 297821
Enable the selection of the 64-bit signed multiply accumulate
instructions which operate on 16-bit operands. These are enabled for
ARMv5TE onwards for ARM and for V6T2 and other DSP enabled Thumb
architectures.
Differential Revision: https://reviews.llvm.org/D30044
llvm-svn: 297809
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Make MCSectionELF::AssociatedSection be a link to a symbol, because
that's how it works in the assembly, and use it in the asm printer.
llvm-svn: 297769
This instruction was missing from the list of opcodes that we check, so we were
hitting an llvm_unreachable in ARMMCCodeEmitter.cpp for the ARM MOVT
instruction, rather than the diagnostic that is emitted for the other MOVW/MOVT
instructions.
Differential revision: https://reviews.llvm.org/D30936
llvm-svn: 297739
Create nodes for smulwb and smulwt and move their selection from
DAGToDAG to DAG combine. smlawb and smlawt can then be selected
using tablegen. Added some helper functions to detect shift patterns
as well as a wrapper around SimplifyDemandBits. Added a couple of
extra tests.
Differential Revision: https://reviews.llvm.org/D30708
llvm-svn: 297716
Recommiting with compiler time improvements
Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 297695
We used to hit an unreachable in getRegBankFromRegClass when dealing with the
stack pointer. This commit adds support for the GPRsp reg class.
llvm-svn: 297621
Loop over the ARM decode tables; this is a clean-up to reduce some code
duplication.
Differential Revision: https://reviews.llvm.org/D30814
llvm-svn: 297608
ARMISD::ADD[CE] nodes, instead of the generic ISD::ADD[CE].
Summary:
This allows for some simplification because the combines
are no longer limited to just one go at the node before
it gets legalized into an ARM target-specific one.
Reviewers: jmolloy, rogfer01
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30401
llvm-svn: 297453
same as already done for ARM and Thumb2.
Reviewers: jmolloy, rogfer01, efriedma
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30400
llvm-svn: 297443
Minor cleanup in ARMInstrVFP.td: removed some FIXMEs and added a MC test for
vcmp that was actually missing.
Differential Revision: https://reviews.llvm.org/D30745
llvm-svn: 297376
The check for LSL #0 in an IT block was checking if operand 4 was zero, but
operand 4 is the condition code operand so it was actually checking for LSLEQ.
Fix this by checking operand 3, which really is the immediate operand, and add
some tests.
Differential Revision: https://reviews.llvm.org/D30692
llvm-svn: 297142
The original patch r296865 was reverted as it broke the chromium builds for
Android https://bugs.llvm.org/show_bug.cgi?id=32134, this patch reapplies
r296865 with a fix to make sure it doesn't cause the build regression.
The problem was that intrinsic selection on int_arm_get_fpscr was failing in
ISel this was because the code to manually select this intrinsic still thought
it was the version with no side-effects (INTRINSIC_WO_CHAIN) which is wrong as
it doesn't semantically match the definition in the tablegen code which says it
does have side-effects, I've fixed this by updating the intrinsic type to
INTRINSIC_W_CHAIN (has side-effects). I've also added a test for this based on
Hans original reproducer.
Differential Revision: https://reviews.llvm.org/D30645
llvm-svn: 297137
Summary: Previously, it had always been materialized as a push/pop sequence.
Reviewers: labrinea, jroelofs
Reviewed By: jroelofs
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30648
llvm-svn: 297134
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
llvm-svn: 297100
This patch causes compile times for some patterns to explode. I have
a (large, unreduced) test case that slows down by more than 20x and
several test cases slow down by 2x. I'm sending some of the test cases
directly to Nirav and following up with more details in the review log,
but this should unblock anyone else hitting this.
llvm-svn: 296862
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation
as LastOp.
This patch fixes some cases where we would move stores to the wrong
insert point.
Re-commit with a fix to increment NumMove in the right place.
Differential Revision: https://reviews.llvm.org/D30124
llvm-svn: 296815
After r296750, we're able to match interleaved accesses having types wider than
128 bits. This patch updates the associated TTI costs.
Differential Revision: https://reviews.llvm.org/D29675
llvm-svn: 296751
This patch teaches (ARM|AArch64)ISelLowering.cpp to match illegal vector types
to interleaved access intrinsics as long as the types are multiples of the
vector register width. A "wide" access will now be mapped to multiple
interleave intrinsics similar to the way in which non-interleaved accesses with
illegal types are legalized into multiple accesses. I'll update the associated
TTI costs (in getInterleavedMemoryOpCost) as a follow-on.
Differential Revision: https://reviews.llvm.org/D29466
llvm-svn: 296750
Original commit message:
[ARM] Fix insert point for store rescheduling.
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation as
LastOp.
This patch fixes some cases where we would sink stores for no reason.
llvm-svn: 296718
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation as
LastOp.
This patch fixes some cases where we would sink stores for no reason.
Differential Revision: https://reviews.llvm.org/D30124
llvm-svn: 296708
This code starts from the high end of the sorted vector of offsets, and
works backwards: it tries to find contiguous offsets, process them, then
pops them from the end of the vector. Most of the code agrees with this
order of processing, but one loop doesn't: it instead processes elements
from the low end of the vector (which are nodes with unrelated offsets).
Fix that loop to process the correct elements.
This has a few implications. One, we don't incorrectly return early when
processing multiple groups of offsets in the same block (which allows
rescheduling prera-ldst-insertpt.mir). Two, we pick the correct insert
point for loads, so they're correctly sorted (which affects the
scheduling of vldm-liveness.ll). I think it might also impact some of
the heuristics slightly.
Differential Revision: https://reviews.llvm.org/D30368
llvm-svn: 296701
Lower i1, i8 and i16 call parameters by extending them before storing them on
the stack. Also make sure we encode the correct, extended size in the
corresponding memory operand, and that we compute the correct stack size in the
end.
The latter is a bit more complicated because we used to compute the stack size
in the getStackAddress method, based on the Size and Offset of the parameters.
However, if the last parameter is sign extended, we'd be using the wrong,
non-extended size, and we'd end up with a smaller stack than we need to hold the
extended value. Instead of hacking this up based on the value of Size in
getStackAddress, we move our stack size handling logic to assignArg, where we
have access to the CCState which knows everything we could possibly want to know
about the stack. This way we don't need to duplicate any knowledge or resort to
any ugly hacks.
On this same occasion, update the IRTranslator test to check the sizes of the
stores everywhere, not just for sign extended paramteres.
llvm-svn: 296631
This parsing code was incorrectly checking for invalid characters, so an
invalid instruction like:
msr spsr_w, r0
would be emitted as:
msr spsr_cxsf, r0
Differential revision: https://reviews.llvm.org/D30462
llvm-svn: 296607
This prevents generating stm r1!, {r0, r1} on Thumb1, where value
stored for r1 is UNKONWN.
Patch by Zhaoshi Zheng.
Differential Revision: https://reviews.llvm.org/D27910
llvm-svn: 296538
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296476
Lower i32, float and double parameters that need to live on the stack. This
boils down to creating some G_GEPs starting from the stack pointer and storing
the values there. During the process we also keep track of the stack size and
use the final value in the ADJCALLSTACKDOWN/UP instructions.
We currently assert for smaller types, since they usually require extensions.
They will be handled in a separate patch.
llvm-svn: 296473
In Thumb2, instructions which write to the PC are UNPREDICTABLE if they are in
an IT block but not the last instruction in the block.
Previously, we only diagnosed this for LDM instructions, this patch extends the
diagnostic to cover all of the relevant instructions.
Differential Revision: https://reviews.llvm.org/D30398
llvm-svn: 296459
The transform in question claims to be doing:
// fold (add (select cc, 0, c), x) -> (select cc, x, (add, x, c))
...starting in PerformADDCombineWithOperands(), but it wasn't actually checking for a setcc node
for the sext/zext patterns.
This is exactly the opposite of a transform I'd like to add to DAGCombiner's foldSelectOfConstants(),
so I was seeing infinite loops with my draft of a patch applied.
The changes in select_const.ll look positive (less instructions). The change in arm-and-tst-peephole.ll
is unrelated. We're changing the input IR in that test to preserve the intent of the test, but that's
not affected by this code change.
Differential Revision:
https://reviews.llvm.org/D30355
llvm-svn: 296389
Currently we handle this correctly in arm, but in thumb we don't which leads to
an unpredictable instruction being emitted for LSL #0 in an IT block and SP not
being permitted in some cases when it should be.
For the thumb2 LSL we can handle this by making LSL #0 an alias of MOV in the
.td file, but for thumb1 we need to handle it in checkTargetMatchPredicate to
get the IT handling right. We also need to adjust the handling of
MOV rd, rn, LSL #0 to avoid generating the 16-bit encoding in an IT block. We
should also adjust it to allow SP in the same way that it is allowed in
MOV rd, rn, but I haven't done that here because it looks like it would take
quite a lot of work to get right.
Additionally correct the selection of the 16-bit shift instructions in
processInstruction, where it was checking if the two registers were equal when
it should have been checking if they were low. It appears that previously this
code was never executed and the 16-bit encoding was selected by default, but
the other changes I've done here have somehow made it start being used.
Differential Revision: https://reviews.llvm.org/D30294
llvm-svn: 296342
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296252
FastISel wasn't checking the isFPOnlySP subtarget feature before emitting
double-precision operations, so it got completely invalid CodeGen for doubles
on Cortex-M4F.
The normal ISel testing wasn't spectacular either so I added a second RUN line
to improve that while I was in the area.
llvm-svn: 296031
Introduce a common ValueHandler for call returns and formal arguments, and
inherit two different versions for handling the differences (at the moment the
only difference is the way physical registers are marked as used).
llvm-svn: 295973
Add support for lowering calls with parameters than can fit into regs. Use the
same ValueHandler that we used for function returns, but rename it to match its
new, extended purpose.
llvm-svn: 295971
The ARMConstantIslandPass didn't have support for handling accesses to
constant island objects through ARM::t2LDRBpci instructions. This adds
support for that.
This fixes PR31997.
llvm-svn: 295964
The pass tries to fix a spill of LR that turns out to be unnecessary.
So it removes the tPOP but forgets to remove tPUSH.
This causes the stack be misaligned upon returning the function.
Thus, remove the tPUSH as well in this case.
Differential Revision: https://reviews.llvm.org/D30207
llvm-svn: 295816
This patch adds missing sched classes for Thumb2 instructions.
This has been missing so far, and as a consequence, machine
scheduler models for individual sub-targets have tended to
be larger than they needed to be. These patches should help
write schedulers better and faster in the future
for ARM sub-targets.
Reviewer: Diana Picus
Differential Revision: https://reviews.llvm.org/D29953
llvm-svn: 295811
This just adds the basic skeleton for supporting a new object file format.
All of the actual encoding will be implemented in followup patches.
Differential Revision: https://reviews.llvm.org/D26722
llvm-svn: 295803
PC isn't allowed in the source operand of t2MOVr, so change the register class
to one without PC. SP handling is slightly trickier and changes depending on if
we're in ARMv8, so do that in checkTargetMatchPredicate.
Differential Revision: https://reviews.llvm.org/D30199
llvm-svn: 295732
There used to be a check in the IRTranslator that prevented us from having to
deal with atomic loads/stores. That check has been removed in r294993 and the
AArch64 backend was updated accordingly. This commit does the same thing for the
ARM backend.
In general, in the ARM backend we introduce fences during the atomic expand
pass, so we don't have to worry about atomics, *except* for the 32-bit ARMv8
target, which handles atomics more like AArch64. Since we don't want to worry
about that yet, just bail out of instruction selection if we find any atomic
loads.
llvm-svn: 295662
Removed the HasT2ExtractPack feature and replaced its references
with HasDSP. This then allows the Thumb2 extend instructions to be
selected for ARMv8M +dsp. These instruction descriptions have also
been refactored and more target tests have been added for their isel.
Differential Revision: https://reviews.llvm.org/D29623
llvm-svn: 295452
Add some asserts to make sure we're using the mappings that we think we're
using. This is to keep us from accidentally breaking functionality while moving
to TableGen'erated mappings.
llvm-svn: 295441
Start using the Subtarget to make decisions about what's legal. In particular,
we only mark floating point operations as legal if we have VFP2, which is
something we should've done from the very start.
llvm-svn: 295439
Since they're only used for passing around double precision floating point
values into the general purpose registers, we'll lower them to VMOVDRR and
VMOVRRD.
llvm-svn: 295310
For now we just mark them as legal all the time and let the other passes bail
out if they can't handle it. In the future, we'll want to move more of the
brains into the legalizer.
llvm-svn: 295300
For the hard float calling convention, we just use the D registers.
For the soft-fp calling convention, we use the R registers and move values
to/from the D registers by means of G_SEQUENCE/G_EXTRACT. While doing so, we
make sure to honor the endianness of the target, since the CCAssignFn doesn't do
that for us.
For pure soft float targets, we still bail out because we don't support the
libcalls yet.
llvm-svn: 295295
Summary:
The attached test case fails with "fatal error: error in backend:
misaligned pc-relative fixup value" as the jump table is misaligned.
The EmitAlignment existed already for ARM and Thumb-1 code, but was
missing for Thumb-2.
The test checks that the fatal error disappears when generating an obj
file, as well as checking the align directive is there when producing an
asm file.
Reviewers: rengolin, grosbach, t.p.northover, jmolloy, SjoerdMeijer, samparker
Reviewed By: samparker
Subscribers: samparker, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D29650
llvm-svn: 294950
We match a sequence of 3-4 instructions into a tTBB pseudo. One of our checks is that
a particular register in that sequence is killed (so it can be clobbered by the pseudo).
We weren't noticing if an errant MOV or other instruction had infiltrated the
sequence we were walking. If it had, and it defined the register we've already
identified as killed, it makes it live across the tBR_JT and thus unclobberable.
Notice this case and bail out.
llvm-svn: 294949
When generating a floating point comparison we currently unconditionally
generate VCMPE. This has the sideeffect of setting the cumulative Invalid
bit in FPSCR if any of the operands are QNaN.
It is expected that use of a relational predicate on a QNaN value should
raise Invalid. Quoting from the C standard:
The relational and equality operators support the usual mathematical
relationships between numeric values. For any ordered pair of numeric
values exactly one of relationships the less, greater, equal and is true.
Relational operators may raise the floating-point exception when argument
values are NaNs.
The standard doesn't explicitly state the expectation for equality operators,
but the implication and obvious expectation is that equality operators
should not raise Invalid on a QNaN input, as those predicates are wholly
defined on unordered inputs (to return not equal).
Therefore, add a new operand to ARMISD::FPCMP and FPCMPZ indicating if
QNaN should raise Invalid, and pipe that through to TableGen.
llvm-svn: 294945
There are no vldN/vstN f16 variants, even with +fullfp16.
We could use the i16 variants, but, in practice, even with +fullfp16,
the f16 sequence leading to the i16 shuffle usually gets scalarized.
We'd need to improve our support for f16 codegen before getting there.
Teach the cost model to consider f16 interleaved operations as
expensive. Otherwise, we are all but guaranteed to end up with
a large block of scalarized vector code.
llvm-svn: 294819
There are no vldN/vstN f16 variants, even with +fullfp16.
We could use the i16 variants, but, in practice, even with +fullfp16,
the f16 sequence leading to the i16 shuffle usually gets scalarized.
We'd need to improve our support for f16 codegen before getting there.
Reject f16 interleaved accesses. If we try to emit the f16 intrinsics,
we'll just end up with a selection failure.
llvm-svn: 294818
In the encoding of system registers in the M-class MSR instruction the mask bits
should be 2 for registers that don't take a _<bits> qualifier (the instruction
is unpredictable otherwise), and should also be 2 if the register takes a
_<bits> qualifier but it's not present as no _<bits> is an alias for _nzcvq.
Differential Revision: https://reviews.llvm.org/D29828
llvm-svn: 294762
Gcc supports target armv7ve which is armv7-a with virtualization
extensions. This change adds support for this in llvm for gcc
compatibility.
Also remove redundant FeatureHWDiv, FeatureHWDivARM for a few models as
this is specified automatically by FeatureVirtualization.
Patch by Manoj Gupta.
Differential Revision: https://reviews.llvm.org/D29472
llvm-svn: 294661
Functions that have a dynamic alloca require a base register which is defined to
be X19 on AArch64 and r6 on ARM. We have defined the swifterror register to be
the same register. Use a different callee save register for swifterror instead:
X21 on AArch64
R8 on ARM
rdar://30433803
llvm-svn: 294551
We mark X0 as preserved by a call that passes the returned parameter.
x0 = ...
fun(x0) // no implicit def of x0
This no longer is valid if we pass the parameter in a different register then
the returned value as is the case with a swiftself parameter (passed in x20).
x20 = ...
fun(x20) // there should be an implict def of x8
rdar://30425845
llvm-svn: 294527
Add a register bank for floating point values and select simple instructions
using them (add, copies from GPR).
This assumes that the hardware can cope with a single precision add (VADDS)
instruction, so the legalizer will treat G_FADD as legal and the instruction
selector will refuse to select if the hardware doesn't support it. In the future
we'll want to be more careful about this, and legalize to libcalls if we have to
use soft float.
llvm-svn: 294442
When constructing global address literals while targeting the RWPI
relocation model. LLVM currently only uses literal pools. If MOVW/MOVT
instructions are available we can use these instead. Beside being more
efficient it allows -arm-execute-only to work with
-relocation-model=RWPI as well.
When we generate MOVW/MOVT for global addresses when targeting the RWPI
relocation model, we need to use base relative relocations. This patch
does the needed plumbing in MC to generate these for MOVW/MOVT.
Differential Revision: https://reviews.llvm.org/D29487
Change-Id: I446786e43a6f5aa9b6a5bb2cd216d60d41c7755d
llvm-svn: 294298
Summary:
This patch tablegen-erates the ARM register bank information so that the
static tables added in D27807 no longer need to be maintained.
Depends on D27338
Reviewers: t.p.northover, rovka, ab, qcolombet, aditya_nandakumar
Reviewed By: rovka
Subscribers: aemerson, rengolin, mgorny, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D28567
llvm-svn: 294124
Summary:
The tail call optimisation is performed before register allocation, so
at that point we don't know if LR is being spilt or not. If LR was spilt
to the stack, then we cannot do a tail call optimisation. That would
involve popping back into LR which is not possible in Thumb1 code.
Reviewers: rengolin, jmolloy, rovka, olista01
Reviewed By: olista01
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D29020
llvm-svn: 294000
On ELF every section can have a corresponding section symbol. When in
an assembly file we have
.quad .text
the '.text' refers to that symbol.
The way we used to handle them is to leave .text an undefined symbol
until the very end when the object writer would map them to the
actual section symbol.
The problem with that is that anything before the end would see an
undefined symbol. This could result in bad diagnostics
(test/MC/AArch64/label-arithmetic-diags-elf.s), or incorrect results
when using the asm streamer (est/MC/Mips/expansion-jal-sym-pic.s).
Fixing this will also allow using the section symbol earlier for
setting sh_link of SHF_METADATA sections.
This patch includes a few hacks to avoid changing our behaviour when
handling conflicts between section symbols and other symbols. I
reported pr31850 to track that.
llvm-svn: 293936
This is the second in the series of patches to enable adding
of machine sched-models for ARM processors easier and compact.
This patch focuses on integer instructions and adds missing
sched definitions.
Reviewers: rovka, rengolin
Differential Revision: https://reviews.llvm.org/D29127
llvm-svn: 293935
Recommiting after fixing X86 inc/dec chain bug.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293893
It is important to change the ArgInfo's type from pointer to integer, otherwise
the CC assign function won't know what to do. Instead of hacking it up, we use
ComputeValueVTs and introduce some of the helpers that we will need later on for
lowering more complex types.
llvm-svn: 293889
Allow unknown types in TLI.getValueType, otherwise we get asserts for certain
types that we do not support yet (instead of returning that we don't support
them and falling through the normal error path).
llvm-svn: 293888
This patch moves some helper functions related to interleaved access
vectorization out of LoopVectorize.cpp and into VectorUtils.cpp. We would like
to use these functions in a follow-on patch that improves interleaved load and
store lowering in (ARM/AArch64)ISelLowering.cpp. One of the functions was
already duplicated there and has been removed.
Differential Revision: https://reviews.llvm.org/D29398
llvm-svn: 293788
Add both cores to the target parser and TableGen. Test that eabi
attributes are set correctly for both cores. Additionally, test the
absence and presence of MOVT in Cortex-M23 and Cortex-M33, respectively.
Committed on behalf of Sanne Wouda.
Reviewers : rengolin, olista01.
Differential Revision: https://reviews.llvm.org/D29073
llvm-svn: 293761
The Requires class overrides the target requirements of an instruction,
rather than adding to them, so all ARM instructions need to include the
IsARM predicate when they have overwitten requirements.
This caused the swp and swpb instructions to be allowed in thumb mode
assembly, and the ARM encoding of CDP to be selected in codegen (which
is different for conditional instructions).
Differential Revision: https://reviews.llvm.org/D29283
llvm-svn: 293634
Support lowering AEABI TLS access (__aeabi_read_tp) with long calls.
This requires adjusting the call sequence to use an indirect call to get
full addressability.
Resolves PR31769!
llvm-svn: 293433
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
The Windows on ARM target uses custom division for normal division as
the backend needs to insert division-by-zero checks. However, it is
designed to only handle non-vectorized division. ARM has custom
lowering for vectorized division as that can avoid loading registers
with the values and invoke a division routine for each one, preferring
to lower using NEON instructions. Fall back to the custom lowering for
the NEON instructions if we encounter a vectorized division.
Resolves PR31778!
llvm-svn: 293259
Summary:
This patch provides more staging for tail calls in XRay Arm32 . When the logging part of XRay is ready for tail calls, its support in the core part of XRay Arm32 may be as easy as changing the number passed to the handler from 1 to 2.
Coupled patch:
- https://reviews.llvm.org/D28674
Reviewers: dberris, rengolin
Reviewed By: dberris
Subscribers: llvm-commits, iid_iunknown, aemerson, rengolin, dberris
Differential Revision: https://reviews.llvm.org/D28673
llvm-svn: 293185
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
Add support for loading i1, i8 and i16 arguments from the stack, with or without
the ABI extension flags.
When the ABI extension flags are present, we load a 4-byte value, otherwise we
preserve the size of the load and let the instruction selector replace it with a
LDRB/LDRH. This generates the same thing as DAGISel.
Differential Revision: https://reviews.llvm.org/D27803
llvm-svn: 293163
Refactoring to remove duplications of this method.
New method getOperandsScalarizationOverhead() that looks at the present unique
operands and add extract costs for them. Old behaviour was to just add extract
costs for one operand of the type always, which still happens in
getArithmeticInstrCost() if no operands are provided by the caller.
This is a good start of improving on this, but there are more places
that can be improved by using getOperandsScalarizationOverhead().
Review: Hal Finkel
https://reviews.llvm.org/D29017
llvm-svn: 293155
Summary:
Lifetime extension wasn't triggered on the result of BuildMI because the
reference was non-const. However, instead of adding a const, I've
removed the reference entirely as RVO should kick in anyway.
Reviewers: rovka, bkramer
Reviewed By: bkramer
Subscribers: aemerson, rengolin, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D29124
llvm-svn: 293059
Add support for:
* i1 add
* i1 function arguments, if passed through registers
* i1 returns, with ABI signext/zeroext
Differential Revision: https://reviews.llvm.org/D27706
llvm-svn: 293035
At the moment, this means supporting the signext/zeroext attribute on the return
type of the function. For function arguments, signext/zeroext should be handled
by the caller, so there's nothing for us to do until we start lowering calls.
Note that this does not include support for other extensions (i8 to i16), those
will be added later.
Differential Revision: https://reviews.llvm.org/D27705
llvm-svn: 293034
This is a series of patches to enable adding of machine sched
models for ARM processors easier and compact. They define new
sched-readwrites for groups of ARM instructions. This has been
missing so far, and as a consequence, machine scheduler models
for individual sub-targets have tended to be larger than they
needed to be.
The current patch focuses on floating-point instructions.
Reviewers: Diana Picus (rovka), Renato Golin (rengolin)
Differential Revision: https://reviews.llvm.org/D28194
llvm-svn: 292825
We also want to optimise tests like this: return a*b == 0. The MULS
instruction is flag setting, so we don't need the CMP instruction but can
instead branch on the result of the MULS. The generated instructions sequence
for this example was: MULS, MOVS, MOVS, CMP. The MOVS instruction load the
boolean values resulting from the select instruction, but these MOVS
instructions are flag setting and were thus preventing this optimisation. Now
we first reorder and move the MULS to before the CMP and generate sequence
MOVS, MOVS, MULS, CMP so that the optimisation could trigger. Reordering of the
MULS and MOVS is safe to do because the subsequent MOVS instructions just set
the CPSR register and don't use it, i.e. the CPSR is dead.
Differential Revision: https://reviews.llvm.org/D27990
llvm-svn: 292608
Hunt down some of the places where we use bare addReg(0) or addImm(AL).addReg(0)
and replace with add(condCodeOp()) and add(predOps()). This should make it
easier to understand what those operands represent (without having to look at
the definition of the instruction that we're adding to).
Differential Revision: https://reviews.llvm.org/D27984
llvm-svn: 292587
Summary:
Emission of XRay table was occasionally disabled for Arm32, but this bug was not then detected because earlier (also by mistake) testing of XRay was occasionally disabled on 32-bit Arm targets. This patch should fix that problem and detect such problems in the future.
This patch is one of a series, see also
- https://reviews.llvm.org/D28623
Reviewers: rengolin, dberris
Reviewed By: dberris
Subscribers: llvm-commits, aemerson, rengolin, dberris, iid_iunknown
Differential Revision: https://reviews.llvm.org/D28624
llvm-svn: 292516
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since first commit attempt:
* Added missing guards
* Added more missing guards
* Found and fixed a use-after-free bug involving Twine locals
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292478
A 64-bit relocation does not exist in 32-bit ARMELF. Report an error
instead of crashing.
PR23870
Patch by Sanne Wouda (sanwou01).
Differential Revision: https://reviews.llvm.org/D28851
llvm-svn: 292373
Summary:
In this function, virtual registers can be introduced (for example
through calls to emitThumbRegPlusImmInReg). doScavengeFrameVirtualRegs
will replace those virtual registers with concrete registers later on
in PrologEpilogInserter, which sets NoVRegs again.
This patch fixes the Codegen/Thumb/segmented-stacks.ll test case which
failed with expensive checks.
https://llvm.org/bugs/show_bug.cgi?id=27484
Reviewers: rnk, bkramer, olista01
Reviewed By: olista01
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D28829
llvm-svn: 292372
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since last commit:
The new tablegen pass is now correctly guarded by LLVM_BUILD_GLOBAL_ISEL and
this should fix the buildbots however it may not be the whole fix. The previous
buildbot failures suggest there may be a memory bug lurking that I'm unable to
reproduce (including when using asan) or spot in the source. If they re-occur
on this commit then I'll need assistance from the bot owners to track it down.
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292367
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
llvm-svn: 292366
This reverts commit r292210, as it broke the Thumb buldbot with:
clang-5.0: error: the clang compiler does not support '-fxray-instrument
on thumbv7-unknown-linux-gnueabihf'.
llvm-svn: 292357
Some platforms (notably iOS) use a different calling convention for unnamed vs
named parameters in varargs functions, so we need to keep track of this
information when translating calls.
Since not many platforms are involved, the guts of the special handling is in
the ValueHandler class (with a generic implementation that should work for most
targets).
llvm-svn: 292283
Summary:
Emission of XRay table was occasionally disabled for Arm32, but this bug was not then detected because earlier (also by mistake) testing of XRay was occasionally disabled on 32-bit Arm targets. This patch should fix that problem and detect such problems in the future.
This patch is one of a series, see also
- https://reviews.llvm.org/D28623
Reviewers: rengolin, dberris
Reviewed By: dberris
Subscribers: llvm-commits, aemerson, rengolin, dberris, iid_iunknown
Differential Revision: https://reviews.llvm.org/D28624
llvm-svn: 292210
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292132
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
llvm-svn: 291911
GCC changes the CC between the user-code and the builtins based on the
value of `-target` rather than `-mfloat-abi`. When a HF target is used,
the VFP variant of the AAPCS CC is used. Otherwise, the AAPCS variant
is used. In all cases, the AEABI functions use the AAPCS CC. Adjust
the calling convention based on the target.
Resolves PR30543!
llvm-svn: 291909
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
llvm-svn: 291898
For AddDefaultT1CC, we add a new helper t1CondCodeOp, which creates the
appropriate register operand. For AddNoT1CC, we use the existing condCodeOp
helper - we only had two uses of AddNoT1CC, so at this point it's probably not
worth having yet another helper just for them.
Differential Revision: https://reviews.llvm.org/D28603
llvm-svn: 291894
Replace all uses of AddDefaultCC with add(condCodeOp()).
The transformation has been done automatically with a custom tool based on Clang
AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28557
llvm-svn: 291893
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Replace all uses of AddDefaultPred with MachineInstrBuilder::add(predOps()).
This makes the code building MachineInstrs more readable, because it allows us
to write code like:
MIB.addSomeOperand(blah)
.add(predOps())
.addAnotherOperand(blahblah)
instead of
AddDefaultPred(MIB.addSomeOperand(blah))
.addAnotherOperand(blahblah)
This commit also adds the predOps helper in the ARM backend, as well as the add
method taking a variable number of operands to the MachineInstrBuilder.
The transformation has been done mostly automatically with a custom tool based
on Clang AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28555
llvm-svn: 291890
Switch some additional library call setup to be table driven. This
makes it more immediately obvious what the library call looks like.
This is important for ARM since the calling conventions for the builtins
change based on the target/libcall name. NFC
llvm-svn: 291789
Summary:
The register bank is now entirely initialized in the constructor. However,
we still have the hardcoded number of register classes which will be
dealt with in the TableGen patch (D27338) since we do not have access
to this information to resolve this at this stage. The number of register
classes is known to the TRI and to TableGen but the RegisterBank
constructor is too early for the former and too late for the latter.
This will be fixed when the data is tablegen-erated.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27809
llvm-svn: 291770
Summary:
Refactor the RegisterBank initialization to use static data. This requires
GlobalISel implementations to rewrite calls to createRegisterBank() and
addRegBankCoverage() into a call to setRegBankData().
Out of tree targets can use diff 4 of D27807
(https://reviews.llvm.org/D27807?id=84117) to have addRegBankCoverage() dump
the register classes and other data that needs to be provided to
setRegBankData(). This is the method that was used to generate the static data
in this patch.
Tablegen-eration of this static data will follow after some refactoring.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27807
Differential Revision: https://reviews.llvm.org/D27808
llvm-svn: 291768
The new matchers work after legalization to make them simpler, and to avoid
blocking other optimizations.
Differential Revision: https://reviews.llvm.org/D27779
llvm-svn: 291693
updated instructions:
pmulld, pmullw, pmulhw, mulsd, mulps, mulpd, divss, divps, divsd, divpd, addpd and subpd.
special optimization case which replaces pmulld with pmullw\pmulhw\pshuf seq.
In case if the real operands bitwidth <= 16.
Differential Revision: https://reviews.llvm.org/D28104
llvm-svn: 291657
This code seems to be target dependent which may not be the same for all targets.
Passed the decision whether the given stride is complex or not to the target by sending stride information via SCEV to getAddressComputationCost instead of 'IsComplex'.
Specifically at X86 targets we dont see any significant address computation cost in case of the strided access in general.
Differential Revision: https://reviews.llvm.org/D27518
llvm-svn: 291106
Summary:
No need to have this per-architecture. While there, unify 32-bit ARM's
behaviour with what changed elsewhere and start function names lowercase
as per the coding standards. Individual entry emission code goes to the
entry's own class.
Fully tested on amd64, cross-builds on both ARMs and PowerPC.
Reviewers: dberris
Subscribers: aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28209
llvm-svn: 290858
See https://reviews.llvm.org/D6678 for the history of
isExtractSubvectorCheap. Essentially the same considerations apply
to ARM.
This temporarily breaks the formation of vpadd/vpaddl in certain cases;
AddCombineToVPADDL essentially assumes that we won't form VUZP shuffles.
See https://reviews.llvm.org/D27779 for followup fix.
Differential Revision: https://reviews.llvm.org/D27774
llvm-svn: 290198
Diana Picus