Seems the execution dependency pass likes to use FP instructions when most of the consuming code is integer if a vextractf128 instruction produced the register. Without AVX2 we don't have the corresponding integer instruction available.
This patch suppresses the domain on these instructions to GenericDomain if AVX2 is not supported so that they are ignored by domain fixing. If AVX2 is supported we'll report the correct domain and allow them to switch between integer and fp.
Overall I think this produces better results in the modified test cases.
llvm-svn: 294824
This requires that we communicate to X86InstrInfo::optimizeCompareInstr
that the second operand is neither a register nor an immediate. The way we
do that is by setting CmpMask to zero.
Note that there were already instructions where the second operand was not a
register nor an immediate, namely X86::SUB*rm, so also set CmpMask to zero
for those instructions. This seems like a latent bug, but I was unable to
trigger it.
Differential Revision: https://reviews.llvm.org/D28621
llvm-svn: 294634
They are currently modelled incorrectly (as calls, which clobber
registers, confusing e.g. Machine Copy Propagation).
Reverting until we figure out the proper solution.
llvm-svn: 294348
This includes unmasked forms of variable shift and shifting by the lower element of a register.
Still need to do shift by immediate which was not foldable prior to avx512 and all the masked forms.
llvm-svn: 294285
This patch moves the class for scheduling adjacent instructions,
MacroFusion, to the target.
In AArch64, it also expands the fusion to all instructions pairs in a
scheduling block, beyond just among the predecessors of the branch at the
end.
Differential revision: https://reviews.llvm.org/D28489
llvm-svn: 293737
Isel now selects masked move instructions for vselect instead of blendm. But sometimes it beneficial to register allocation to remove the tied register constraint by using blendm instructions.
This also picks up cases where the masked move was created due to a masked load intrinsic.
Differential Revision: https://reviews.llvm.org/D28454
llvm-svn: 292005
We'll now expand AVX512_128_SET0 to an EVEX VXORD if VLX available. Or if its not, but register allocation has selected a non-extended register we will use VEX VXORPS. And if its an extended register without VLX we'll use a 512-bit XOR. Do the same for AVX512_FsFLD0SS/SD.
This makes it possible for the register allocator to have all 32 registers available to work with.
llvm-svn: 292004
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
These aren't the most interesting set of blendm instructions as the unmasked version isn't useful. We were also missing the B and W forms. I'll add the masked versions of all sizes in a future patch.
llvm-svn: 291885
Summary:
The expression for computing the return value of getMemOpBaseRegImmOfs has only
one possible value. The other value would result in a return earlier in the
function. This patch replaces the expression with its only possible value.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27437
llvm-svn: 290133
Add the missing domain equivalences for movss, movsd, movd and movq zero extending loading instructions.
Differential Revision: https://reviews.llvm.org/D27684
llvm-svn: 289825
The general idea here is to get enough of the existing restrictions out of the way that the already existing folding logic in foldMemoryOperand can kick in for STATEPOINTs and fold references to immutable stack slots. The key changes are:
Support for folding multiple operands at once which reference the same load
Support for folding multiple loads into a single instruction
Walk all the operands of the instruction for varidic instructions (this is a bug fix!)
Once this lands, I'll post another patch which refactors the TII interface here. There's nothing actually x86 specific about the x86 code used here.
Differential Revision: https://reviews.llvm.org/D24103
llvm-svn: 289510
Summary:
These intrinsic instructions are all selected from intrinsics that have well defined behavior for where the upper bits come from. It's not the same place as the lower bits.
As you can see we were suppressing load folding for these instructions in some cases. In none of the cases was the separate load helping avoid a partial dependency on the destination register. So we should just go ahead and allow the load to be folded.
Only foldMemoryOperand was suppressing folding for these. They all have patterns for folding sse_load_f32/f64 that aren't gated with OptForSize, but sse_load_f32/f64 doesn't allow 128-bit vector loads. It only allows scalar_to_vector and vzmovl of scalar loads to match. There's no reason we can't allow a 128-bit vector load to be narrowed so I would like to fix sse_load_f32/f64 to allow that. And if I do that it changes some of these same test cases to fold the load too.
Reviewers: spatel, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27611
llvm-svn: 289419
The second operand of an "ri" instruction may be an immediate, but it may
also be a globalvariable, so we should make any assumptions.
This fixes PR31271.
Differential Revision: https://reviews.llvm.org/D27481
llvm-svn: 288964
Summary:
This patch removes the scalar logical operation alias instructions. We can just use reg class copies and use the normal packed instructions instead. This removes the need for putting these instructions in the execution domain fixing tables as was done recently.
I removed the loadf64_128 and loadf32_128 patterns as DAG combine creates a narrower load for (extractelt (loadv4f32)) before we ever get to isel.
I plan to add similar patterns for AVX512DQ in a future commit to allow use of the larger register class when available.
Reviewers: spatel, delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27401
llvm-svn: 288771
This changes the scalar non-intrinsic non-avx roundss/sd instruction
definitions not to read their destination register - allowing partial dependency
breaking.
This fixes PR31143.
Differential Revision: https://reviews.llvm.org/D27323
llvm-svn: 288703
This makes the createGenericSchedLive() function that constructs the
default scheduler available for the public API. This should help when
you want to get a scheduler and the default list of DAG mutations.
This also shrinks the list of default DAG mutations:
{Load|Store}ClusterDAGMutation and MacroFusionDAGMutation are no longer
added by default. Targets can easily add them if they need them. It also
makes it easier for targets to add alternative/custom macrofusion or
clustering mutations while staying with the default
createGenericSchedLive(). It also saves the callback back and forth in
TargetInstrInfo::enableClusterLoads()/enableClusterStores().
Differential Revision: https://reviews.llvm.org/D26986
llvm-svn: 288057
I don't think isel selects these today, favoring adding the register to itself instead. But the load folding tables shouldn't be so concerned with what isel will use and just represent the relationships.
llvm-svn: 288007
If we were to unfold these, the load size would be increased to the register size. This is not safe to do since the enlarged load can do things like cross a page boundary into a page that doesn't exist.
I probably missed some instructions, but this should be a large portion of them.
llvm-svn: 288001
Most of these are the SSE4.1 PMOVZX/PMOVSX instructions which all read less than 128-bits. The only other was PMOVUPD which by definition is an unaligned load.
llvm-svn: 287991
Not sure this is truly needed but we had the floating point equivalents, the aligned equivalents, and the EVEX equivalents. So this just makes it complete.
llvm-svn: 287960
We did not support subregs in InlineSpiller:foldMemoryOperand() because targets
may not deal with them correctly.
This adds a target hook to let the spiller know that a target can handle
subregs, and actually enables it for x86 for the case of stack slot reloads.
This fixes PR30832.
Differential Revision: https://reviews.llvm.org/D26521
llvm-svn: 287792
I'm sure this caused the load size to misprint in Intel syntax output. We were also inconsistent about which patterns used which instruction between VEX and EVEX.
There are two different reg/reg versions of movq, one from a GPR and one from the lower 64-bits of an XMM register. This changes the loading folding table to use the single i64mem memory form for folding both cases. But we need to use TB_NO_REVERSE to prevent a duplicate entry in the unfolding table.
llvm-svn: 287622
Summary:
The index and one of the table operands can be swapped by changing the opcode to the other version. Neither of these operands are the one that can load from memory so this can't be used to increase memory folding opportunities.
We need to handle the unmasked forms and the kz forms. Since the load operand isn't being commuted we can commute the load and broadcast instructions too.
Reviewers: igorb, delena, Ayal, Farhana, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25652
llvm-svn: 287621
We can replace "scalar" FP-bitwise-logic with other forms of bitwise-logic instructions.
Scalar SSE/AVX FP-logic instructions only exist in your imagination and/or the bowels of
compilers, but logically equivalent int, float, and double variants of bitwise-logic
instructions are reality in x86, and the float variant may be a shorter instruction
depending on which flavor (SSE or AVX) of vector ISA you have...so just prefer float all
the time.
This is a preliminary step towards solving PR6137:
https://llvm.org/bugs/show_bug.cgi?id=6137
Differential Revision:
https://reviews.llvm.org/D26712
llvm-svn: 287122
-Don't print the 'x' suffix for the 128-bit reg/mem VEX encoded instructions in Intel syntax. This is consistent with the EVEX versions.
-Don't print the 'y' suffix for the 256-bit reg/reg VEX encoded instructions in Intel or AT&T syntax. This is consistent with the EVEX versions.
-Allow the 'x' and 'y' suffixes to be used for the reg/mem forms when we're assembling using Intel syntax.
-Allow the 'x' and 'y' suffixes on the reg/reg EVEX encoded instructions in Intel or AT&T syntax. This is consistent with what VEX was already allowing.
This should fix at least some of PR28850.
llvm-svn: 286787
This removes a couple tablegen classes that become unused after this change. Another class gained an additional parameter to allow PMADDUBSW to specify a different result type from its input type.
llvm-svn: 285515
MOVSD/MOVSS take a 128-bit register and a FR32/FR64 register input, the commutation code wasn't taking this into account leading to verification errors.
This patch inserts a vreg copy mi to ensure that the registers are correct.
Fix for PR30607
Differential Revision: https://reviews.llvm.org/D25280
llvm-svn: 283539
I don't know for sure that we truly needs this, but its the only vector load that isn't rematerializable. Making it consistent allows it to not be a special case in the td files.
llvm-svn: 283083
Instead of selecting between MOVSD/MOVSS and BLENDPD/BLENDPS at shuffle lowering by subtarget this will help us select the instruction based on actual commutation requirements.
We could possibly add BLENDPD/BLENDPS -> MOVSD/MOVSS commutation and MOVSD/MOVSS memory folding using a similar approach if it proves useful
I avoided adding AVX512 handling as I'm not sure when we should be making use of VBLENDPD/VBLENDPS on EVEX targets
llvm-svn: 283037
We can't use Jcc to leave a Win64 function in general, because that
confuses the unwinder. However, for "leaf" functions, that is, functions
where the return address is always on top of the stack and which don't
have unwind info, it's OK.
Differential Revision: https://reviews.llvm.org/D24836
llvm-svn: 282920
This adds new pseudo instructions that can be selected during register allocation to represent loads and stores of XMM/YMM registers when AVX512F is available, but VLX isn't. They will be converted to VEX encoded moves if the register turns out to be XMM0-15/YMM0-15. Otherwise either an EVEX VEXTRACT(store) or VBROADCAST(load) will be used.
Fixes one of the cases from PR29112.
llvm-svn: 282690
VPTERNLOG is a ternary instruction with an immediate specifying the logical operation to perform. For each bit position in the 3 source vectors the bit from each source is concatenated together and the resulting 3-bit value is used to select a bit in the immediate. This bit value is written to the result vector.
We can commute this by swapping operands and modifying the immediate. To modify the immediate we need to swap two pairs of bits. The pairs correspond to the locations in the immediate where the commuted operands bits have opposite values and the uncommuted operand has the same value. Bits 0 and 7 will never be swapped since the relevant bits from all sources are the same value.
This refactors and reuses parts of the FMA3 commuting code which is also a three operand instruction.
llvm-svn: 282132
r280832 added 32-bit support for emitting conditional tail-calls, but
dropped imp-used parameter registers. This went unnoticed until
r281113, which added 64-bit support, as this is only exposed with
parameter passing via registers.
Don't drop the imp-used parameters.
llvm-svn: 281223
Now that MachineBasicBlock::reverse_instr_iterator knows when it's at
the end (since r281168 and r281170), implement
MachineBasicBlock::reverse_iterator directly on top of an
ilist::reverse_iterator by adding an IsReverse template parameter to
MachineInstrBundleIterator. This replaces another hard-to-reason-about
use of std::reverse_iterator on list iterators, matching the changes for
ilist::reverse_iterator from r280032 (see the "out of scope" section at
the end of that commit message). MachineBasicBlock::reverse_iterator
now has a handle to the current node and has obvious invalidation
semantics.
r280032 has a more detailed explanation of how list-style reverse
iterators (invalidated when the pointed-at node is deleted) are
different from vector-style reverse iterators like std::reverse_iterator
(invalidated on every operation). A great motivating example is this
commit's changes to lib/CodeGen/DeadMachineInstructionElim.cpp.
Note: If your out-of-tree backend deletes instructions while iterating
on a MachineBasicBlock::reverse_iterator or converts between
MachineBasicBlock::iterator and MachineBasicBlock::reverse_iterator,
you'll need to update your code in similar ways to r280032. The
following table might help:
[Old] ==> [New]
delete &*RI, RE = end() delete &*RI++
RI->erase(), RE = end() RI++->erase()
reverse_iterator(I) std::prev(I).getReverse()
reverse_iterator(I) ++I.getReverse()
--reverse_iterator(I) I.getReverse()
reverse_iterator(std::next(I)) I.getReverse()
RI.base() std::prev(RI).getReverse()
RI.base() ++RI.getReverse()
--RI.base() RI.getReverse()
std::next(RI).base() RI.getReverse()
(For more details, have a look at r280032.)
llvm-svn: 281172
Craig Topper