There is no syntax like {@code ...} in Doxygen, @code is a block command
that ends with @endcode, and generally these are not enclosed in braces.
The correct syntax for inline code snippets is @c <code>.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D98665
This avoids a few unnecessary conversion from StringRef to std::string, and a
bunch of extra allocation thanks to the SmallString.
Differential Revision: https://reviews.llvm.org/D98190
This patch adds support for reverse loop vectorization.
It is possible to vectorize the following loop:
```
for (int i = n-1; i >= 0; --i)
a[i] = b[i] + 1.0;
```
with fixed or scalable vector.
The loop-vectorizer will use 'reverse' on the loads/stores to make
sure the lanes themselves are also handled in the right order.
This patch adds support for scalable vector on IRBuilder interface to
create a reverse vector. The IR function
CreateVectorReverse lowers to experimental.vector.reverse for scalable vector
and keedp the original behavior for fixed vector using shuffle reverse.
Differential Revision: https://reviews.llvm.org/D95363
This pass runs in any situations but we skip it when it is not O0 and the
function doesn't have optnone attribute. With -O0, the def of shape to amx
intrinsics is near the amx intrinsics code. We are not able to find a
point which post-dominate all the shape and dominate all amx intrinsics.
To decouple the dependency of the shape, we transform amx intrinsics
to scalar operation, so that compiling doesn't fail. In long term, we
should improve fast register allocation to allocate amx register.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D93594
This patch introduces generic x86-64 edge kinds, and refactors the MachO/x86-64
backend to use these edge kinds. This simplifies the implementation of the
MachO/x86-64 backend and makes it possible to write generic x86-64 passes and
utilities.
The new edge kinds are different from the original set used in the MachO/x86-64
backend. Several edge kinds that were not meaningfully distinguished in that
backend (e.g. the PCRelMinusN edges) have been merged into single edge kinds in
the new scheme (these edge kinds can be reintroduced later if we find a use for
them). At the same time, new edge kinds have been introduced to convey extra
information about the state of the graph. E.g. The Request*AndTransformTo**
edges represent GOT/TLVP relocations prior to synthesis of the GOT/TLVP
entries, and the 'Relaxable' suffix distinguishes edges that are candidates for
optimization from edges which should be left as-is (e.g. to enable runtime
redirection).
ELF/x86-64 will be refactored to use these generic edges at some point in the
future, and I anticipate a similar refactor to create a generic arm64 support
header too.
Differential Revision: https://reviews.llvm.org/D98305
For ThinLTO's prelink compilation, we need to put external inline candidates into an import list attached to function's entry count metadata. This enables ThinLink to treat such cross module callee as hot in summary index, and later helps postlink to import them for profile guided cross module inlining.
For AutoFDO, the import list is retrieved by traversing the nested inlinee functions. For CSSPGO, since profile is flatterned, a few things need to happen for it to work:
- When loading input profile in extended binary format, we need to load all child context profile whose parent is in current module, so context trie for current module includes potential cross module inlinee.
- In order to make the above happen, we need to know whether input profile is CSSPGO profile before start reading function profile, hence a flag for profile summary section is added.
- When searching for cross module inline candidate, we need to walk through the context trie instead of nested inlinee profile (callsite sample of AutoFDO profile).
- Now that we have more accurate counts with CSSPGO, we swtiched to use entry count instead of total count to decided if an external callee is potentially beneficial to inline. This make it consistent with how we determine whether call tagert is potential inline candidate.
Differential Revision: https://reviews.llvm.org/D98590
Prefer (self-documenting) return values to output parameters (which are
liable to be used).
While here, rename Noop to Nop which is more widely used and improves
consistency with hasEmitNops/setEmitNops/emitNop/etc.
This patch implements the __rndr and __rndrrs intrinsics to provide access to the random
number instructions introduced in Armv8.5-A. They are only defined for the AArch64
execution state and are available when __ARM_FEATURE_RNG is defined.
These intrinsics store the random number in their pointer argument and return a status
code if the generation succeeded. The difference between __rndr __rndrrs, is that the latter
intrinsic reseeds the random number generator.
The instructions write the NZCV flags indicating the success of the operation that we can
then read with a CSET.
[1] https://developer.arm.com/docs/101028/latest/data-processing-intrinsics
[2] https://bugs.llvm.org/show_bug.cgi?id=47838
Differential Revision: https://reviews.llvm.org/D98264
Change-Id: I8f92e7bf5b450e5da3e59943b53482edf0df6efc
D98289 was erroneously reporting `invalid range list offset 0x20110`
instead of `invalid range list table index 0`.
Differential Revision: https://reviews.llvm.org/D98589
This makes the target triple, graph name, and full graph content available
when making decisions about how to populate the linker pass pipeline.
Also updates the LLJITWithObjectLinkingLayerPlugin example to show more
API use, including use of the API changes in this patch.
- This patch adds in support for the ordinary HLASM comment syntax asm
statements (Reference - Chapter 7, Comment Statements, Ordinary Comment
Statements)
- In brief, the ordinary comment syntax if used, must begin with the "*"
character
- To achieve this, this patch makes use of the CommentString attribute
provided in the base MCAsmInfo class
- In the SystemZMCAsmInfo class, the CommentString attribute was set to
"*" based on the assembler dialect
- Furthermore, a new attribute RestrictCommentString, is provided to only
treat a string as a comment if it appears at the start of the asm
statement. Example: "jo *-4" is valid in HLASM (jump back 4 bytes from
current point - similar to jo -4 in gnu asm) and we don't want "*-4" to
be treated as a comment.
- RFC for HLASM Parser support implementation: https://lists.llvm.org/pipermail/llvm-dev/2021-January/147686.html
Reviewed By: scott.linder, Kai
Differential Revision: https://reviews.llvm.org/D97703
byval arguments need to be assumed writable. Only implicitly stack
passed arguments which aren't addressable in the IR can be assumed
immutable.
Mips is still broken since for some reason its doing its own thing
with the ValueHandlers (and x86 doesn't actually handle byval
arguments now, although some of the code is there).
This broke the check-profile tests on Mac, see comment on the code
review.
> This is no longer needed, we can add __llvm_profile_runtime directly
> to llvm.compiler.used or llvm.used to achieve the same effect.
>
> Differential Revision: https://reviews.llvm.org/D98325
This reverts commit c7712087cb.
Also reverting the dependent follow-up commit:
Revert "[InstrProfiling] Generate runtime hook for ELF platforms"
> When using -fprofile-list to selectively apply instrumentation only
> to certain files or functions, we may end up with a binary that doesn't
> have any counters in the case where no files were selected. However,
> because on Linux and Fuchsia, we pass -u__llvm_profile_runtime, the
> runtime would still be pulled in and incur some non-trivial overhead,
> especially in the case when the continuous or runtime counter relocation
> mode is being used. A better way would be to pull in the profile runtime
> only when needed by declaring the __llvm_profile_runtime symbol in the
> translation unit only when needed.
>
> This approach was already used prior to 9a041a7522, but we changed it
> to always generate the __llvm_profile_runtime due to a TAPI limitation.
> Since TAPI is only used on Mach-O platforms, we could use the early
> emission of __llvm_profile_runtime there, and on other platforms we
> could change back to the earlier approach where the symbol is generated
> later only when needed. We can stop passing -u__llvm_profile_runtime to
> the linker on Linux and Fuchsia since the generated undefined symbol in
> each translation unit that needed it serves the same purpose.
>
> Differential Revision: https://reviews.llvm.org/D98061
This reverts commit 87fd09b25f.
As readnone function they become movable and LICM can hoist them
out of a loop. As a result in LCSSA form phi node of type token
is created. No one is ready that GCRelocate first operand is phi node
but expects to be token.
GVN test were also updated, it seems it does not do what is expected.
Test for LICM is also added.
This reverts commit f352463ade.
Nested `omp [begin|end] declare variant` inherit the selectors from
surrounding `omp (begin|end) declare variant` constructs. To stop such
propagation the user can add the `disable_selector_propagation` to the
`extension` set in the `implementation` selector.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D95765
This instruction is only valid on 2D MSAA and 2D MSAA Array
surfaces. Remove intrinsic support for other dimension types,
and block assembly for unsupported dimensions.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D98397
This patch extends the matrix spec to allow matrix-by-scalar division.
Originally support for `/` was left out to avoid ambiguity for the
matrix-matrix version of `/`, which could either be elementwise or
specified as matrix multiplication M1 * (1/M2).
For the matrix-scalar version, no ambiguity exists; `*` is also
an elementwise operation in that case. Matrix-by-scalar division
is commonly supported by systems including Matlab, Mathematica
or NumPy.
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D97857
For CGSCC inline, we need to scale down a function's branch weights and entry counts when thee it's inlined at a callsite. This is done through updateCallProfile. Additionally, we also scale the weigths for the inlined clone based on call site count in updateCallerBFI. Neither is needed for inlining during sample profile loader as it's using context profile that is separated from inlinee's own profile. This change skip the inlinee profile scaling for sample loader inlining.
Differential Revision: https://reviews.llvm.org/D98187
Recently we improved the lowering of low overhead loops and tail
predicated loops, but concentrated first on the DLS do style loops. This
extends those improvements over to the WLS while loops, improving the
chance of lowering them successfully. To do this the lowering has to
change a little as the instructions are terminators that produce a value
- something that needs to be treated carefully.
Lowering starts at the Hardware Loop pass, inserting a new
llvm.test.start.loop.iterations that produces both an i1 to control the
loop entry and an i32 similar to the llvm.start.loop.iterations
intrinsic added for do loops. This feeds into the loop phi, properly
gluing the values together:
%wls = call { i32, i1 } @llvm.test.start.loop.iterations.i32(i32 %div)
%wls0 = extractvalue { i32, i1 } %wls, 0
%wls1 = extractvalue { i32, i1 } %wls, 1
br i1 %wls1, label %loop.ph, label %loop.exit
...
loop:
%lsr.iv = phi i32 [ %wls0, %loop.ph ], [ %iv.next, %loop ]
..
%iv.next = call i32 @llvm.loop.decrement.reg.i32(i32 %lsr.iv, i32 1)
%cmp = icmp ne i32 %iv.next, 0
br i1 %cmp, label %loop, label %loop.exit
The llvm.test.start.loop.iterations need to be lowered through ISel
lowering as a pair of WLS and WLSSETUP nodes, which each get converted
to t2WhileLoopSetup and t2WhileLoopStart Pseudos. This helps prevent
t2WhileLoopStart from being a terminator that produces a value,
something difficult to control at that stage in the pipeline. Instead
the t2WhileLoopSetup produces the value of LR (essentially acting as a
lr = subs rn, 0), t2WhileLoopStart consumes that lr value (the Bcc).
These are then converted into a single t2WhileLoopStartLR at the same
point as t2DoLoopStartTP and t2LoopEndDec. Otherwise we revert the loop
to prevent them from progressing further in the pipeline. The
t2WhileLoopStartLR is a single instruction that takes a GPR and produces
LR, similar to the WLS instruction.
%1:gprlr = t2WhileLoopStartLR %0:rgpr, %bb.3
t2B %bb.1
...
bb.2.loop:
%2:gprlr = PHI %1:gprlr, %bb.1, %3:gprlr, %bb.2
...
%3:gprlr = t2LoopEndDec %2:gprlr, %bb.2
t2B %bb.3
The t2WhileLoopStartLR can then be treated similar to the other low
overhead loop pseudos, eventually being lowered to a WLS providing the
branches are within range.
Differential Revision: https://reviews.llvm.org/D97729
1. PGOMemOPSizeOpt grabs only the first, up to five (by default) entries from
the value profile metadata and preserves the remaining entries for the fallback
memop call site. If there are more than five entries, the rest of the entries
would get dropped. This is fine for PGOMemOPSizeOpt itself as it only promotes
up to 3 (by default) values, but potentially not for other downstream passes
that may use the value profile metadata.
2. PGOMemOPSizeOpt originally assumed that only values 0 through 8 are kept
track of. When the range buckets were introduced, it was changed to skip the
range buckets, but since it does not grab all entries (only five), if some range
buckets exist in the first five entries, it could potentially cause fewer
promotion opportunities (eg. if 4 out of 5 were range buckets, it may be able to
promote up to one non-range bucket, as opposed to 3.) Also, combined with 1, it
means that wrong entries may be preserved, as it didn't correctly keep track of
which were entries were skipped.
To fix this, PGOMemOPSizeOpt now grabs all the entries (up to the maximum number
of value profile buckets), keeps track of which entries were skipped, and
preserves all the remaining entries.
Differential Revision: https://reviews.llvm.org/D97592
RISCV makes all fixed vector MVTs with size less than or equal
to a command line option legal.
This didn't include v1f16 because it was missing but did include v1f32 and v1f64.
One test is affected where we did test this type, but it is a horizontal
reduction so it is non-sensical. Perhaps we should canonicalize that
away somewhere.
I'm not sure if we should be making v1 types legal, but this will at
least make RISCV consistent across all types.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98365
Summary:
The changes introduced in D87946 changed the API for libomptarget
functions. `__kmpc_push_target_tripcount` was a function in Clang 11.x
but was not given a backward-compatible interface. This change will
require people using Clang 13.x or 12.x to recompile their offloading
programs.
Reviewed By: jdoerfert cchen
Differential Revision: https://reviews.llvm.org/D98358
This patch improves salvageDebugInfoImpl by allowing it to salvage arithmetic
operations with two or more non-const operands; this includes the GetElementPtr
instruction, and most Binary Operator instructions. These salvages produce
DIArgList locations and are only valid for dbg.values, as currently variadic
DIExpressions must use DW_OP_stack_value. This functionality is also only added
for salvageDebugInfoForDbgValues; other functions that directly call
salvageDebugInfoImpl (such as in ISel or Coroutine frame building) can be
updated in a later patch.
Differential Revision: https://reviews.llvm.org/D91722
Recently gc.result has been marked with readnone instead of readonly and
this opens a door for different optimization to duplicate gc.result.
Statepoint lowering is not ready to see several gc.results.
The problem appears when there are gc.results with one located in the same
basic block and another located in other basic block.
In this case we need both export VR and fill local setValue.
Note that this case is not sufficient optimization done before CodeGen.
It is evident that local gc.result dominates all other gc.results and it is handled
by GVN and EarlyCSE.
But anyway, even if IR is not optimal Backend should not crash on a valid IR.
Reviewers: reames, dantrushin
Reviewed By: dantrushin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D98393
Relative to the previous implementation, this always uses
aliasesUnknownInst() instead of aliasesPointer() to correctly
handle atomics. The added test case was previously miscompiled.
-----
Even when MemorySSA-based LICM is used, an AST is still populated
for scalar promotion. As the AST has quadratic complexity, a lot
of time is spent in this step despite the existing access count
limit. This patch optimizes the identification of promotable stores.
The idea here is pretty simple: We're only interested in must-alias
mod sets of loop invariant pointers. As such, only populate the AST
with loop-invariant loads and stores (anything else is definitely
not promotable) and then discard any sets which alias with any of
the remaining, definitely non-promotable accesses.
If we promoted something, check whether this has made some other
accesses loop invariant and thus possible promotion candidates.
This is much faster in practice, because we need to perform AA
queries for O(NumPromotable^2 + NumPromotable*NumNonPromotable)
instead of O(NumTotal^2), and NumPromotable tends to be small.
Additionally, promotable accesses have loop invariant pointers,
for which AA is cheaper.
This has a signicant positive compile-time impact. We save ~1.8%
geomean on CTMark at O3, with 6% on lencod in particular and 25%
on individual files.
Conceptually, this change is NFC, but may not be so in practice,
because the AST is only an approximation, and can produce
different results depending on the order in which accesses are
added. However, there is at least no impact on the number of promotions
(licm.NumPromoted) in test-suite O3 configuration with this change.
Differential Revision: https://reviews.llvm.org/D89264
This is no longer needed, we can add __llvm_profile_runtime directly
to llvm.compiler.used or llvm.used to achieve the same effect.
Differential Revision: https://reviews.llvm.org/D98325
This reverts commit bacf9cf2c5 and
reinstates commit 1a9bd5b813.
Reverting this commit did not appear to make the problem go away, so we
can go ahead and reland it.
This patch makes uses of the context bridges introduced in D83299 to make
AAValueConstantRange call site specific.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D83744
During D88827 it was requested to remove the local implementation
of Memory/File Buffers:
// TODO: refactor the buffer classes in LLVM to enable us to use them here
// directly.
This patch uses raw_ostream instead of Buffers. Generally, using streams
could allow us to reduce memory usages. No need to load all data into the
memory - the data could be streamed through a smaller buffer.
Thus, this patch uses raw_ostream as an interface for output data:
Error executeObjcopyOnBinary(CopyConfig &Config,
object::Binary &In,
raw_ostream &Out);
Note 1. This patch does not change the implementation of Writers
so that data would be directly stored into raw_ostream.
This is assumed to be done later.
Note 2. It would be better if Writers would be implemented in a such way
that data could be streamed without seeking/updating. If that would be
inconvenient then raw_ostream could be replaced with raw_pwrite_stream
to have a possibility to seek back and update file headers.
This is assumed to be done later if necessary.
Note 3. Current FileOutputBuffer allows using a memory-mapped file.
The raw_fd_ostream (which could be used if data should be stored in the file)
does not allow us to use a memory-mapped file. Memory map functionality
could be implemented for raw_fd_ostream:
It is possible to add resize() method into raw_ostream.
class raw_ostream {
void resize(uint64_t size);
}
That method, implemented for raw_fd_ostream, could create a memory-mapped file.
The streamed data would be written into that memory file then.
Thus we would be able to use memory-mapped files with raw_fd_ostream.
This is assumed to be done later if necessary.
Differential Revision: https://reviews.llvm.org/D91028
D96109 was recently submitted which contains the refactored implementation of
-funique-internal-linakge-names by adding the unique suffixes in clang rather
than as an LLVM pass. Deleting the former implementation in this change.
Differential Revision: https://reviews.llvm.org/D98234
On riscv32, i64 isn't a legal scalar type but we would like to
support scalable vectors of i64.
This patch introduces a new node that can represent a splat made
of multiple scalar values. I've used this new node to solve the current
crashes we experience when getConstant is used after type legalization.
For RISCV, we are now default expanding SPLAT_VECTOR to SPLAT_VECTOR_PARTS
when needed and then handling the SPLAT_VECTOR_PARTS later during
LegalizeOps. I've remove the special case I previously put in for
ABS for D97991 as the default expansion is now able to succesfully
use getConstant.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98004
Currently we crash in type legalization any time an intrinsic
uses a scalar i64 on RV32.
This patch adds support for type legalizing this to prevent
crashing. I don't promise that it uses the best possible codegen
just that it is functional.
This first version handles 3 cases. vmv.v.x intrinsic, vmv.s.x
intrinsic and intrinsics that take a scalar input, splat it and
then do some operation.
For vmv.v.x we'll either rely on hardware sign extension for
constants or we'll convert it to multiple splats and bit
manipulation.
For vmv.s.x we use a really unoptimal sequence inspired by what
we do for an INSERT_VECTOR_ELT.
For the third case we'll either try to use the .vi form for
constants or convert to a complicated splat and bitmanip and use
the .vv form of the operation.
I've renamed the ExtendOperand field to SplatOperand now use it
specifically for the third case. The first two cases are handled
by custom lowering specifically for those intrinsics.
I haven't updated all tests yet, but I tried to cover a subset
that includes single-width, widening, and narrowing.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97895
Aaron Puchert