This partially reverts c7b3a91017. Having
libclang.so with a different SONAME than the other LLVM libraries was
causing a lot of confusion for users. Also, this change did not really
acheive it's purpose of allowing apps to use newer versions of
libclang.so without rebuilding, because a new version of libclang.so
requires a new version of libLLVM.so, which does not have a stable ABI.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D129160
Also move MangleCtx when moving some lazy emission states in
CodeGenModule. Without this patch clang-repl hits an invalid address
access when passing `-Xcc -O2` flag.
Signed-off-by: Jun Zhang <jun@junz.org>
Differential Revision: https://reviews.llvm.org/D130420
Currently in Sema::ActOnEnumBody(...) when calculating NumPositiveBits we miss
the case where there is only a single enumerator with value zero and the case of
an empty enum. In both cases we end up with zero positive bits when in fact we
need one bit to store the value zero.
This PR updates the calculation to account for these cases.
Differential Revision: https://reviews.llvm.org/D130301
This compensates for 8f0c901c1a which enabled
-Wunused-command-line-argument for unimplemented -mtune= in the generic code.
Ignoring -mtune= appears to be longstanding and the error-free behavior in the
presence of -Werror is unfortunately relied on by the Linux kernel's arm and
powerpc ports. Ignore the warnings for the upcoming 15.0.0 branch and will
implement functionality to fill the test gap soon.
Link: https://github.com/ClangBuiltLinux/linux/issues/1674
Firstly, we we make an additional GNUInstallDirs-style variable. With
NixOS, for example, this is crucial as we want those to go in
`${dev}/lib/cmake` not `${out}/lib/cmake` as that would a cmake subdir
of the "regular" libdir, which is installed even when no one needs to do
any development.
Secondly, we make *Config.cmake robust to absolute package install
paths. We for NixOS will in fact be passing them absolute paths to make
the `${dev}` vs `${out}` distinction mentioned above, and the
GNUInstallDirs-style variables are suposed to support absolute paths in
general so it's good practice besides the NixOS use-case.
Thirdly, we make `${project}_INSTALL_PACKAGE_DIR` CACHE PATHs like other
install dirs are.
Reviewed By: sebastian-ne
Differential Revision: https://reviews.llvm.org/D117973
We call tail-call-elim near the beginning of the pipeline,
but that is too early to annotate calls that get added later.
In the motivating case from issue #47852, the missing 'tail'
on memset leads to sub-optimal codegen.
I experimented with removing the early instance of
tail-call-elim instead of just adding another pass, but that
appears to be slightly worse for compile-time:
+0.15% vs. +0.08% time.
"tailcall" shows adding the pass; "tailcall2" shows moving
the pass to later, then adding the original early pass back
(so 1596886802 is functionally equivalent to 180b0439dc ):
https://llvm-compile-time-tracker.com/index.php?config=NewPM-O3&stat=instructions&remote=rotateright
Note that there was an effort to split the tail call functionality
into 2 passes - that could help reduce compile-time if we find
that this change costs more in compile-time than expected based
on the preliminary testing:
D60031
Differential Revision: https://reviews.llvm.org/D130374
The latter way to abbreviate is a lot more common in the LLVM codebase.
Reviewed By: sgatev, xazax.hun
Differential Revision: https://reviews.llvm.org/D130423
Fix `MapLattice` API to return `std::pair<iterator, bool>`,
allowing users to detect when an element has been inserted without
performing a redundant map lookup.
Differential Revision: https://reviews.llvm.org/D130497
and use fallback only for C.
It fixes the isssue with clang-cl:
```
#include <stdatomic.h>
#include <stdbool.h>
#ifdef __cplusplus
#include <atomic>
using namespace std;
#endif
int main() {
atomic_bool b = true;
}
```
```
$ clang-cl /TC main.cpp
# works
```
```
$ clang-cl /TP /std:c++20 main.cpp
stdatomic.h(70,6): error: conflicting types for 'atomic_thread_fence'
void atomic_thread_fence(memory_order);
^
atomic(166,24): note: previous definition is here
extern "C" inline void atomic_thread_fence(const memory_order _Order) noexcept {
...
fatal error: too many errors emitted, stopping now [-ferror-limit=]
20 errors generated.
```
Many errors but
`<stdatomic.h>` has many macros to built-in functions.
```
#define atomic_thread_fence(order) __c11_atomic_thread_fence(order)
```
and MSVC `<atomic>` has real functions.
and the built-in functions are redefined.
Reviewed By: #libc, aaron.ballman, Mordante
Differential Revision: https://reviews.llvm.org/D130419
This includes the revised provisions of [basic.lookup.argdep] p4
1. ADL is amended to handle p 4.3 where functions in trasitively imported modules may
become visible when they are exported in the same namespace as a visible type.
2. If a function is in a different modular TU, and has internal-linkage, we invalidate
its entry in an overload set.
[basic.lookup.argdep] p5 ex 2 now passes.
Differential Revision: https://reviews.llvm.org/D129174
Currently the C++20 concepts are only merged in `ASTReader`, i.e. when
coming from different TU. This can causes ambiguious reference errors when
trying to access the same concept that should otherwise be merged.
Please see the added test for an example.
Note that we currently use `ASTContext::isSameEntity` to check for ODR
violations. However, it will not check that concept requirements match.
The same issue holds for mering concepts from different TUs, I added a
FIXME and filed a GH issue to track this:
https://github.com/llvm/llvm-project/issues/56310
Reviewed By: ChuanqiXu
Differential Revision: https://reviews.llvm.org/D128921
This patch rewords the static assert diagnostic output. Failing a
_Static_assert in C should not report that static_assert failed. This
changes the wording to be more like GCC and uses "static assertion"
when possible instead of hard coding the name. This also changes some
instances of 'static_assert' to instead be based on the token in the
source code.
Differential Revision: https://reviews.llvm.org/D129048
This test is currently marked as XFAIL for Windows, but running the
test with a debug build of clang-repl.exe crashes with a modal system
dialog. This switches the test to UNSUPPORTED instead. This makes the
test behavior less onerous for those of us doing Debug builds, at the
expense of a minor bit of coverage if the test were ever to start
passing unexpectedly on Windows (which seems like an unlikely event).
specialization
Previously in D120397, we've handled the linkage for function template
and its specialization. But we forgot to handle it for class templates
and their specialization. So we make it in the patch with the similar
approach.
Copying the folder keeps the original permissions by default. This
creates problems when the source folder is read-only, e.g. in a
packaging environment.
Then, the copied folder in the build directory is read-only as well.
Later on, other files are copied into that directory (in the build
tree), failing when the directory is read-only.
Fix that problem by copying the folder without keeping the original
permissions.
Follow-up to D130254.
Differential Revision: https://reviews.llvm.org/D130338
Avoid a crash if a function is imported that has auto return type that
references to a template with an expression-type of argument that
references into the function's body.
Fixes issue #56047
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D129640
Support for functions wmemcpy, wcslen, wcsnlen is added to the checker.
Documentation and tests are updated and extended with the new functions.
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D130091
report an error when encountering 'while' token parsing declarator
```
clang/test/Parser/while-loop-outside-function.c:3:1: error: while loop outside of a function
while // expected-error {{while loop outside of a function}}
^
clang/test/Parser/while-loop-outside-function.c:7:1: error: while loop outside of a function
while // expected-error {{while loop outside of a function}}
^
```
Fixes: https://github.com/llvm/llvm-project/issues/34462
Differential Revision: https://reviews.llvm.org/D129573
They have been ported and tested to work on AArch64
(see D125883, D125758, and D125873).
Reviewed By: dim, MaskRay
Differential Revision: https://reviews.llvm.org/D130063
This patch connects the check for const-correctness with the new general
utility to add `const` to variables.
The code-transformation is only done, if the detected variable for const-ness
is not part of a group-declaration.
The check allows to control multiple facets of adding `const`, e.g. if pointers themself should be
marked as `const` if they are not changed.
Reviewed By: njames93
Differential Revision: https://reviews.llvm.org/D54943
As per P2327R1,
|=, &= and ^= are no longer deprecated in all languages mode.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D130421
5ab6ee7599 assumed that if `RValue::isScalar()` returns true then `RValue::getScalarVal` will return a valid value. This is not the case when the return value is `void` and so void message returns would crash if they hit this path. This is triggered only for cases where the nil-handling path needs to do something non-trivial (destroy arguments that should be consumed by the callee).
Reviewed By: triplef
Differential Revision: https://reviews.llvm.org/D123898
llvm::sort is beneficial even when we use the iterator-based overload,
since it can optionally shuffle the elements (to detect
non-determinism). However llvm::sort is not usable everywhere, for
example, in compiler-rt.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D130406
The #warning directive is standard in C++2b and C2x,
this adjusts the pedantic and extensions warning accordingly.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D130415
This implements
N2836 Identifier Syntax using Unicode Standard Annex 31.
The feature was already implemented for C++,
and the semantics are the same.
Unlike C++ there was, afaict, no decision to
backport the feature in older languages mode,
so C17 and earlier are not modified and the
code point tables for these language modes are conserved.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D130416
-gsplit-dwarf produces a .dwo file which will not be processed by the linker. If
.dwo files contain relocations, they will not be resolved. Therefore the
practice is that .dwo files do not contain relocations.
Address ranges and location description need to use forms/entry kinds indexing
into .debug_addr (DW_FORM_addrx/DW_RLE_startx_endx/etc), which is currently not
implemented.
There is a difficult-to-read MC error with -gsplit-dwarf with RISC-V for both -mrelax and -mno-relax.
```
% clang --target=riscv64-linux-gnu -g -gsplit-dwarf -c a.c
error: A dwo section may not contain relocations
```
We expect to fix -mno-relax soon, so report a driver error for -mrelax for now.
Link: https://github.com/llvm/llvm-project/issues/56642
Reviewed By: compnerd, kito-cheng
Differential Revision: https://reviews.llvm.org/D130190
Fixes modular build for clangPseudoGrammar from clang-tools-extra.
Starting from https://reviews.llvm.org/D126731 clangPseudoGrammar
doesn't depend on generated .inc headers but still depends on
"Basic/TokenKinds.h". It means clangPseudoGrammar depends on module
'Clang_Basic' which does depend on generated .inc headers. To avoid
these coarse dependencies and extra build steps, extract
"clang/Basic/TokenKinds.h" into a top-level module 'Clang_Basic_TokenKinds'.
rdar://97387951
Differential Revision: https://reviews.llvm.org/D130377
This commit adds a fuzzer for LLDB's expression evaluator.
The fuzzer takes a different approach than the current fuzzers
present, and uses an approach that is currently being used for
clang fuzzers.
Instead of fuzzing the evaluator with randomly mutated
characters, protobufs are used to generate a subset of C++. This
is then converted to valid C++ code and sent to the expression
evaluator. In addition, libprotobuf_mutator is used to mutate
the fuzzer's inputs from valid C++ code to valid C++ code, rather
than mutating from valid code to total nonsense.
Differential revision: https://reviews.llvm.org/D129377
Split up from the deferred concepts implementation, this function is
useful for determining the containing function of a different function.
However, in some cases it is valuable to instead get the lexical parent.
This adds a parameter to the existing function to allow a 'Lexical'
parameter to instead select the lexical parent.
In cases where a non-template function is defined inside a function
template, we don't have information about the original uninstantiated
version. In the case of concepts instantiation, we will need the
ability to get back to the original template. This patch splits a piece
of the deferred concepts instantaition patch off to accomplish the
storage of this, with minor runtime overhead, and zero additional
storage.
Clang has traditionally allowed C programs to implicitly convert
integers to pointers and pointers to integers, despite it not being
valid to do so except under special circumstances (like converting the
integer 0, which is the null pointer constant, to a pointer). In C89,
this would result in undefined behavior per 3.3.4, and in C99 this rule
was strengthened to be a constraint violation instead. Constraint
violations are most often handled as an error.
This patch changes the warning to default to an error in all C modes
(it is already an error in C++). This gives us better security posture
by calling out potential programmer mistakes in code but still allows
users who need this behavior to use -Wno-error=int-conversion to retain
the warning behavior, or -Wno-int-conversion to silence the diagnostic
entirely.
Differential Revision: https://reviews.llvm.org/D129881
This patch aims to create a webpage to document
Flang's command line options on https://flang.llvm.org/docs/
in a similar way to Clang's
https://clang.llvm.org/docs/ClangCommandLineReference.html
This is done by using clang_tablegen to generate an .rst
file from Options.td (which is current shared with Clang)
For this to work, ClangOptionDocEmitter.cpp was updated
to allow specific Flang flags to be included,
rather than bulk excluding clang flags.
Note:
Some headings in the generated documentation will incorrectly
contain references to Clang, e.g.
"Flags controlling the behaviour of Clang during compilation"
This is because Options.td (Which is shared between both Clang and Flang)
contains hard-coded DocBrief sections. I couldn't find a non-intrusive way
to make this target-dependant, as such I've left this as is, and it will need revisiting later.
Reviewed By: awarzynski
Differential Revision: https://reviews.llvm.org/D129864
Depends On D130304
This patch pulls the `ApplyBuiltinTransfer` from the `TypeErasedDataflowAnalysis` class into a new `DataflowAnalysisOptions` struct, to allow us to add additional options later without breaking existing code.
Reviewed By: gribozavr2, sgatev
Differential Revision: https://reviews.llvm.org/D130305
This patch moves `Analysis/FlowSensitive/NoopAnalysis.h` from `clang/unittests/` to `clang/include/clang/`, so that we can use it for doing context-sensitive analysis.
Reviewed By: ymandel, gribozavr2, sgatev
Differential Revision: https://reviews.llvm.org/D130304
Copying the folder keeps the original permissions by default. This
creates problems when the source folder is read-only, e.g. in a
packaging environment.
Then, the copied folder in the build directory is read-only as well.
Later on, with configure_file, ClangConfig.cmake is copied into that
directory (in the build tree), failing when the directory is read-only.
Fix that problem by copying the folder without keeping the original
permissions.
Differential Revision: https://reviews.llvm.org/D130254
The re-land fixes module map module dependencies seen on Greendragon, but
not in the clang test suite.
---
Currently we only implement this for the Itanium ABI since the correct
mangling for the initializers in other ABIs is not yet known.
Intended result:
For a module interface [which includes partition interface and implementation
units] (instead of the generic CXX initializer) we emit a module init that:
- wraps the contained initializations in a control variable to ensure that
the inits only happen once, even if a module is imported many times by
imports of the main unit.
- calls module initializers for imported modules first. Note that the
order of module import is not significant, and therefore neither is the
order of imported module initializers.
- We then call initializers for the Global Module Fragment (if present)
- We then call initializers for the current module.
- We then call initializers for the Private Module Fragment (if present)
For a module implementation unit, or a non-module TU that imports at least one
module we emit a regular CXX init that:
- Calls the initializers for any imported modules first.
- Then proceeds as normal with remaining inits.
For all module unit kinds we include a global constructor entry, this allows
for the (in most cases unusual) possibility that a module object could be
included in a final binary without a specific call to its initializer.
Implementation:
- We provide the module pointer in the AST Context so that CodeGen can act
on it and its sub-modules.
- We need to account for module build lines like this:
` clang -cc1 -std=c++20 Foo.pcm -emit-obj -o Foo.o` or
` clang -cc1 -std=c++20 -xc++-module Foo.cpp -emit-obj -o Foo.o`
- in order to do this, we add to ParseAST to set the module pointer in
the ASTContext, once we establish that this is a module build and we
know the module pointer. To be able to do this, we make the query for
current module public in Sema.
- In CodeGen, we determine if the current build requires a CXX20-style module
init and, if so, we defer any module initializers during the "Eagerly
Emitted" phase.
- We then walk the module initializers at the end of the TU but before
emitting deferred inits (which adds any hidden and static ones, fixing
https://github.com/llvm/llvm-project/issues/51873 ).
- We then proceed to emit the deferred inits and continue to emit the CXX
init function.
Differential Revision: https://reviews.llvm.org/D126189
Diagnostic for `-Wauto-import` shouldn't be a warning because it doesn't
represent a potential problem in code that should be fixed. And the
emitted fix-it is likely to trigger `-Watimport-in-framework-header`
which makes it challenging to have a warning-free codebase. But it is
still useful to see how include directives are translated into modular
imports and which module a header belongs to, that's why keep it as a remark.
Keep `-Wauto-import` for now to allow a gradual migration for codebases
using `-Wno-auto-import`, e.g., `-Weverything -Wno-auto-import`.
rdar://79594287
Differential Revision: https://reviews.llvm.org/D130138
Correct the logic used to set `ATOMIC_*_LOCK_FREE` preprocessor macros not
to rely on the ABI alignment of types. Instead, just assume all those
types are aligned correctly by default since clang uses safe alignment
for `_Atomic` types even if the underlying types are aligned to a lower
boundary by default.
For example, the `long long` and `double` types on x86 are aligned to
32-bit boundary by default. However, `_Atomic long long` and `_Atomic
double` are aligned to 64-bit boundary, therefore satisfying
the requirements of lock-free atomic operations.
This fixes PR #19355 by correcting the value of
`__GCC_ATOMIC_LLONG_LOCK_FREE` on x86, and therefore also fixing
the assumption made in libc++ tests. This also fixes PR #30581 by
applying a consistent logic between the functions used to implement
both interfaces.
Reviewed By: hfinkel, efriedma
Differential Revision: https://reviews.llvm.org/D28213
The default host CPU for an i386 triple is typically at least an i586,
which has cmpxchg8b (Clang feature, "cx8"). Therefore,
`__CLANG_ATOMIC_LLONG_LOCK_FREE` is 2 on the host, but the value should
be 1 for the device.
Also, grep for `__CLANG_ATOMIC_*` instead of `__GCC_ATOMIC_*`. The CLANG
macros are always emitted, but the GCC macros are omitted for the
*-windows-msvc targets. The `__GCC_HAVE_SYNC_COMPARE_AND_SWAP` macro
always has GCC in its name, not CLANG, however.
Reviewed By: tra
Differential Revision: https://reviews.llvm.org/D127465
message expressions
For an Obj-C message expression `[o m]`, the adding matcher will match
the declaration of the method `m`. This commit overloads the existing
`callee` ASTMatcher, which originally was only for C/C++ nodes but
also applies to Obj-C messages now.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D129398
First of all, `LLVM_TOOLS_INSTALL_DIR` put there breaks our NixOS
builds, because `LLVM_TOOLS_INSTALL_DIR` defined the same as
`CMAKE_INSTALL_BINDIR` becomes an *absolute* path, and then when
downstream projects try to install there too this breaks because our
builds always install to fresh directories for isolation's sake.
Second of all, note that `LLVM_TOOLS_INSTALL_DIR` stands out against the
other specially crafted `LLVM_CONFIG_*` variables substituted in
`llvm/cmake/modules/LLVMConfig.cmake.in`.
@beanz added it in d0e1c2a550 to fix a
dangling reference in `AddLLVM`, but I am suspicious of how this
variable doesn't follow the pattern.
Those other ones are carefully made to be build-time vs install-time
variables depending on which `LLVMConfig.cmake` is being generated, are
carefully made relative as appropriate, etc. etc. For my NixOS use-case
they are also fine because they are never used as downstream install
variables, only for reading not writing.
To avoid the problems I face, and restore symmetry, I deleted the
exported and arranged to have many `${project}_TOOLS_INSTALL_DIR`s.
`AddLLVM` now instead expects each project to define its own, and they
do so based on `CMAKE_INSTALL_BINDIR`. `LLVMConfig` still exports
`LLVM_TOOLS_BINARY_DIR` which is the location for the tools defined in
the usual way, matching the other remaining exported variables.
For the `AddLLVM` changes, I tried to copy the existing pattern of
internal vs non-internal or for LLVM vs for downstream function/macro
names, but it would good to confirm I did that correctly.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D117977
EnumDecl's promotion type is set either to the parsed type or calculated type
after completing its definition. When it's bool type and has no definition,
its promotion type is bool which is not allowed by clang.
Fixes#56560.
Differential Revision: https://reviews.llvm.org/D130210
A copy-paste error caused UB in the definition of the unsigned long long
versions of the shfl intrinsics. Reported and diagnosed by @trws.
Differential Revision: https://reviews.llvm.org/D129536
The OpenMP offloading runtine currently uses an array of linked
offloading images. One downside to this is that we cannot know the
architecture or triple associated with the given image. In this patch,
instead of embedding the image itself, we embed an offloading binary
instead. This binary is simply a binary format that wraps around the
original linked image to provide some additional metadata. This will
allow us to support offloading to multiple architecture, or performing
future JIT compilation inside of the runtime, more clearly.
Additionally, these can be placed at a special section such that the
supported architectures can be identified using objdump with the support
from D126904. This needs to be stored in a new section name
`.llvm.offloading.images` because the `.llvm.offloading` section
implicitly uses the `SHF_EXCLUDE` flag and will always be stripped.
This patch does not contain the necessary code to parse these in
libomptarget.
Depends on D127246
Reviewed By: saiislam
Differential Revision: https://reviews.llvm.org/D127304
Adds `sarif` option to the existing `-fdiagnostics-format` flag
for intended future work with SARIF diagnostics. Currently issues a warning
against the use of diagnostics in SARIF mode, then defaults to clang style for
diagnostics.
Reviewed By: cjdb, denik, aaron.ballman
Differential Revision: https://reviews.llvm.org/D129886
This patch is in preparation for enabling vectorisation with tail-folding
by default for SVE targets. Once we do that many existing tests will
break that depend upon having normal unpredicated vector loops. For
all such tests I have added the flag:
-prefer-predicate-over-epilogue=scalar-epilogue
Differential Revision: https://reviews.llvm.org/D129137
Looks like we again are going to have problems with libcxx tests that
are overly specific in their dependency on clang's diagnostics.
This reverts commit 6542cb55a3.
This patch is basically the rewording of the static assert statement's
output(error) on screen after failing. Failing a _Static_assert in C
should not report that static_assert failed. It’d probably be better to
reword the diagnostic to be more like GCC and say “static assertion”
failed in both C and C++.
consider a c file having code
_Static_assert(0, "oh no!");
In clang the output is like:
<source>:1:1: error: static_assert failed: oh no!
_Static_assert(0, "oh no!");
^ ~
1 error generated.
Compiler returned: 1
Thus here the "static_assert" is not much good, it will be better to
reword it to the "static assertion failed" to more generic. as the gcc
prints as:
<source>:1:1: error: static assertion failed: "oh no!"
1 | _Static_assert(0, "oh no!");
| ^~~~~~~~~~~~~~
Compiler returned: 1
The above can also be seen here. This patch is about rewording
the static_assert to static assertion.
Differential Revision: https://reviews.llvm.org/D129048
This patch aims to create a webpage to document
Flang's command line options on https://flang.llvm.org/docs/
in a similar way to Clang's
https://clang.llvm.org/docs/ClangCommandLineReference.html
This is done by using clang_tablegen to generate an .rst
file from Options.td (which is current shared with Clang)
For this to work, ClangOptionDocEmitter.cpp was updated
to allow specific Flang flags to be included,
rather than bulk excluding clang flags.
Reviewed By: awarzynski
Differential Revision: https://reviews.llvm.org/D129864
Currently, clang may meet an infinite loop in a very tricky case when it
iterates the default args. This patch tries to fix this by adding a
`fixed` check.
These headers used to be guarded only on PowerPC64 Linux or FreeBSD, but
they can also be enabled for AIX OS target since it's big-endian ready.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D129461
re-land fixes an unwanted interaction with module-map modules, seen in
Greendragon testing.
This provides updates to
[class.mfct]:
Pre C++20 [class.mfct]p2:
A member function may be defined (8.4) in its class definition, in
which case it is an inline member function (7.1.2)
Post C++20 [class.mfct]p1:
If a member function is attached to the global module and is defined
in its class definition, it is inline.
and
[class.friend]:
Pre-C++20 [class.friend]p5
A function can be defined in a friend declaration of a
class . . . . Such a function is implicitly inline.
Post C++20 [class.friend]p7
Such a function is implicitly an inline function if it is attached
to the global module.
We add the output of implicit-inline to the TextNodeDumper, and amend
a couple of existing tests to account for this, plus add tests for the
cases covered above.
Differential Revision: https://reviews.llvm.org/D129045
This patch makes use of OMPIRBuilder support for codegen of taskgroup
construct in clang.
Depends on D128203
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D129992
The heuristic used to determine where the arclite libraries are to be
found was based on the path of the `clang` executable. However, in some
scenarios the `clang` executable is within a toolchain that does not
have arclite. When this happens, derive the arclite paths from the
sysroot option.
This allows Clang to correctly derive the arclite directory in, e.g.,
Swift CI, using similar logic to what the Swift driver has been doing
for several years.
Patched by Doug Gregor.
Reviewed By: keith
Differential Revision: https://reviews.llvm.org/D130205
The new driver primarily allows us to support RDC-mode compilations with
proper linking. This is not needed for non-RDC mode compilation, but we
still would like the new driver to be able to handle this mode so we can
transition away from the old driver in the future. This patch adds the
necessary code to support creating a fatbinary for HIP code generation.
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D129784
A new option -I is added for dxc mode.
It is just alias of existing cc1 -I option.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D128462
Move -lc++experimental before -lc++abi (that was forgotten in the
original patch), and mark a test as UNSUPPORTED on AIX. I contacted
the owners of the AIX bot that failed because I was unable to reproduce
the issue locally.
When F calls G calls H, G is nounwind, and G is inlined into F, then the
inlined call-site to H should be effectively nounwind so as not to lose
information during inlining.
If H itself is nounwind (which often happens when H is an intrinsic), we
no longer mark the callsite explicitly as nounwind. Previously, there
were cases where the inlined call-site of H differs from a pre-existing
call-site of H in F *only* in the explicitly added nounwind attribute,
thus preventing common subexpression elimination.
v2:
- just check CI->doesNotThrow
v3 (resubmit after revert at 3443788087):
- update Clang tests
Differential Revision: https://reviews.llvm.org/D129860
There is at least one Clang test (clang/test/CodeGen/arm_acle.c) which
has functions guarded by #if's that cause those functions to be compiled
only for a subset of RUN lines.
This results in a case where one RUN line has a body for the function
and another doesn't. Treat this case as a conflict for any prefixes that
the two RUN lines have in common.
This change exposed a bug where functions with '$' in the name weren't
properly recognized in ARM assembly (despite there being a test case
that was supposed to catch the problem!). This bug is fixed as well.
Differential Revision: https://reviews.llvm.org/D130089
These features require that all object files are compiled with the support. When
the feature is disabled for an object file, the merge behavior should treat the
file having a value of 0 (see D129911).
Reviewed By: xiangzhangllvm
Differential Revision: https://reviews.llvm.org/D130065
When LLVM_TOOL_LLVM_DRIVER_BUILD is On, create symlinks
to llvm instead of creating the executables. Currently
this only works for install and not
install-distribution, the work for the later will be
split up into a second patch.
Differential Revision: https://reviews.llvm.org/D127800
Specifically, making the following changes:
* Turn lambdas calculating ODR hashes into static functions.
* Move `ODRCXXRecordDifference` where it is used.
* Rename some variables and move some lines of code.
* Replace `auto` with explicit type when the deduced type is not mentioned.
* Add `const` for unmodified objects, so we can pass them to more functions.
Differential Revision: https://reviews.llvm.org/D128690
Summary: Get rid of explicit function splitting in favor of specifically designed Visitor. Move logic from a family of `evalCastKind` and `evalCastSubKind` helper functions to `SValVisitor`.
Differential Revision: https://reviews.llvm.org/D130029
Based on the discussion at [1], this patch adds a Clang flag called
-fexperimental-library that controls whether experimental library
features are provided in libc++. In essence, it links against the
experimental static archive provided by libc++ and defines a feature
that can be picked up by libc++ to enable experimental features.
This ensures that users don't start depending on experimental
(and hence unstable) features unknowingly.
[1]: https://discourse.llvm.org/t/rfc-a-compiler-flag-to-enable-experimental-unstable-language-and-library-features
Differential Revision: https://reviews.llvm.org/D121141
interface decls
This patch teaches getCursorPlatformAvailabilityForDecl to look for
availability attributes on the containing decls or interface decls if
the current decl doesn't have any availability attributes.
Differential Revision: https://reviews.llvm.org/D129504
This patch implements recently ratified extension Zmmul, a subextension
of M (Integer Multiplication and Division) consisting only
multiplication part of it.
Differential Revision: https://reviews.llvm.org/D103313
Reviewed By: craig.topper, jrtc27, asb
Otherwise the brace was detected as a function brace, not wrong per se,
but when directly calling the lambda the calling parens were put on the
next line.
Differential Revision: https://reviews.llvm.org/D129946
This caused build failures when building Clang and libc++ together on Mac:
fatal error: 'experimental/memory_resource' file not found
See the code review for details. Reverting until the problem and how to
solve it is better understood.
(Updates to some test files were not reverted, since they seemed
unrelated and were later updated by 340b48b267b96.)
> This is the first part of a plan to ship experimental features
> by default while guarding them behind a compiler flag to avoid
> users accidentally depending on them. Subsequent patches will
> also encompass incomplete features (such as <format> and <ranges>)
> in that categorization. Basically, the idea is that we always
> build and ship the c++experimental library, however users can't
> use what's in it unless they pass the `-funstable` flag to Clang.
>
> Note that this patch intentionally does not start guarding
> existing <experimental/FOO> content behind the flag, because
> that would merely break users that might be relying on such
> content being in the headers unconditionally. Instead, we
> should start guarding new TSes behind the flag, and get rid
> of the existing TSes we have by shipping their Standard
> counterpart.
>
> Also, this patch must jump through a few hoops like defining
> _LIBCPP_ENABLE_EXPERIMENTAL because we still support compilers
> that do not implement -funstable yet.
>
> Differential Revision: https://reviews.llvm.org/D128927
This reverts commit bb939931a1.
[clang] Emit SARIF Diagnostics: Create clang::SarifDocumentWriter interface
Create an interface for writing SARIF documents from within clang:
The primary intent of this change is to introduce the interface
clang::SarifDocumentWriter, which allows incrementally adding
diagnostic data to a JSON backed document. The proposed interface is
not yet connected to the compiler internals, which will be covered in
future work. As such this change will not change the input/output
interface of clang.
This change also introduces the clang::FullSourceRange type that is
modeled after clang::SourceRange + clang::FullSourceLoc, this is useful
for packaging a pair of clang::SourceLocation objects with their
corresponding SourceManagers.
Previous discussions:
RFC for this change: https://lists.llvm.org/pipermail/cfe-dev/2021-March/067907.htmlhttps://lists.llvm.org/pipermail/cfe-dev/2021-July/068480.html
SARIF Standard (2.1.0):
https://docs.oasis-open.org/sarif/sarif/v2.1.0/os/sarif-v2.1.0-os.html
Differential Revision: https://reviews.llvm.org/D109701
Some code [0] consider that trailing arrays are flexible, whatever their size.
Support for these legacy code has been introduced in
f8f6324983 but it prevents evaluation of
__builtin_object_size and __builtin_dynamic_object_size in some legit cases.
Introduce -fstrict-flex-arrays=<n> to have stricter conformance when it is
desirable.
n = 0: current behavior, any trailing array member is a flexible array. The default.
n = 1: any trailing array member of undefined, 0 or 1 size is a flexible array member
n = 2: any trailing array member of undefined or 0 size is a flexible array member
This takes into account two specificities of clang: array bounds as macro id
disqualify FAM, as well as non standard layout.
Similar patch for gcc discuss here: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
[0] https://docs.freebsd.org/en/books/developers-handbook/sockets/#sockets-essential-functions
Previously, we forget to handle reachability for deduction guide.
The deduction guide is a hint to the compiler. And the deduction guide
should be able to use if the corresponding template decl is reachable.
No behavior change as GNU ld/gold/ld.lld ignore --dynamic-linker in -r mode.
This change makes the intention clearer as we already suppress --dynamic-linker
for -shared, -static, and -static-pie.
Reviewed by: MaskRay, phosek
Differential Revision: https://reviews.llvm.org/D129714
Unfortunatly fixing leak expose use-after-free if delete more then one
Compilation for the same Driver, so I am changing validateTargetProfile
to create own Driver each time.
The test was added by D122865.
The new driver generated offloadinga actions for each active toolchain.
However, for CUDA and HIP it is possible for the toolchain to be active
but one of the files is not a valid input. This can occur if the user
compiles both a CUDA and C source file in the same compiler invocation.
This patch adds some simple logic to quit if the input is not valid as
well.
Reviewed By: tra, MaskRay
Differential Revision: https://reviews.llvm.org/D129885
When an issue exists in the main file (caller) instead of an included file
(callee), using a `src` pattern applying to the included file may be
inappropriate if it's the caller's responsibility. Add `mainfile` prefix to check
the main filename.
For the example below, the issue may reside in a.c (foo should not be called
with a misaligned pointer or foo should switch to an unaligned load), but with
`src` we can only apply to the innocent callee a.h. With this patch we can use
the more appropriate `mainfile:a.c`.
```
//--- a.h
// internal linkage
static inline int load(int *x) { return *x; }
//--- a.c, -fsanitize=alignment
#include "a.h"
int foo(void *x) { return load(x); }
```
See the updated clang/docs/SanitizerSpecialCaseList.rst for a caveat due
to C++ vague linkage functions.
Reviewed By: #sanitizers, kstoimenov, vitalybuka
Differential Revision: https://reviews.llvm.org/D129832
Summary: Introduce a new function 'clang_analyzer_value'. It emits a report that in turn prints a RangeSet or APSInt associated with SVal. If there is no associated value, prints "n/a".
Summary: Sorted some handler-functions into more appropriate visitor functions of the SymbolicRangeInferrer.
- Spread `getRangeForNegatedSub` body over several visitor functions: `VisitSymExpr`, `VisitSymIntExpr`, `VisitSymSymExpr`.
- Moved `getRangeForComparisonSymbol` from `infer` to `VisitSymSymExpr`.
Differential Revision: https://reviews.llvm.org/D129678
The time profiler traces the stages during the clang compile
process. Each compiling stage of a single source file
corresponds to a separately .json file which holds its
time tracing data. However, the .json files are stored in the
same path/directory as its corresponding stage's '-o' option.
For example, if we compile the "demo.cc" to "demo.o" with option
"-o /tmp/demo.o", the time trace data file path is "/tmp/demo.json".
A typical c++ project can contain multiple source files in different
path, but all the json files' paths can be a mess.
The option "-ftime-trace=<value>" allows you to specify where the json
files should be stored. This allows the users to place the time trace
data files of interest in the desired location for further data analysis.
Usage:
- clang/clang++ -ftime-trace ...
- clang/clang++ -ftime-trace=the-directory-you-want ...
- clang/clang++ -ftime-trace=the-directory-you-want/ ...
- clang/clang++ -ftime-trace=the-full-file-path-you-want ...
Differential Revision: https://reviews.llvm.org/D128048
After b646f09555,
the added regression test started being formatted as-if the
multiplication `*` was a pointer. This adapts the heuristic to
distinguish between these two cases.
Reviewed By: jackhong12, curdeius, HazardyKnusperkeks, owenpan
Differential Revision: https://reviews.llvm.org/D129771
TokenManager defines Token interfaces for the clang syntax-tree. This is the level
of abstraction that the syntax-tree should use to operate on Tokens.
It decouples the syntax-tree from a particular token implementation (TokenBuffer
previously). This enables us to use a different underlying token implementation
for the syntax Leaf node -- in clang pseudoparser, we want to produce a
syntax-tree with its own pseudo::Token rather than syntax::Token.
Differential Revision: https://reviews.llvm.org/D128411
Following some recent discussions, this changes the representation
of callbrs in IR. The current blockaddress arguments are replaced
with `!` label constraints that refer directly to callbr indirect
destinations:
; Before:
%res = callbr i8* asm "", "=r,r,i"(i8* %x, i8* blockaddress(@test8, %foo))
to label %asm.fallthrough [label %foo]
; After:
%res = callbr i8* asm "", "=r,r,!i"(i8* %x)
to label %asm.fallthrough [label %foo]
The benefit of this is that we can easily update the successors of
a callbr, without having to worry about also updating blockaddress
references. This should allow us to remove some limitations:
* Allow unrolling/peeling/rotation of callbr, or any other
clone-based optimizations
(https://github.com/llvm/llvm-project/issues/41834)
* Allow duplicate successors
(https://github.com/llvm/llvm-project/issues/45248)
This is just the IR representation change though, I will follow up
with patches to remove limtations in various transformation passes
that are no longer needed.
Differential Revision: https://reviews.llvm.org/D129288
This reverts commit 7c51f02eff because it
stills breaks the LLDB tests. This was re-landed without addressing the
issue or even agreement on how to address the issue. More details and
discussion in https://reviews.llvm.org/D112374.
Without this patch, clang will not wrap in an ElaboratedType node types written
without a keyword and nested name qualifier, which goes against the intent that
we should produce an AST which retains enough details to recover how things are
written.
The lack of this sugar is incompatible with the intent of the type printer
default policy, which is to print types as written, but to fall back and print
them fully qualified when they are desugared.
An ElaboratedTypeLoc without keyword / NNS uses no storage by itself, but still
requires pointer alignment due to pre-existing bug in the TypeLoc buffer
handling.
---
Troubleshooting list to deal with any breakage seen with this patch:
1) The most likely effect one would see by this patch is a change in how
a type is printed. The type printer will, by design and default,
print types as written. There are customization options there, but
not that many, and they mainly apply to how to print a type that we
somehow failed to track how it was written. This patch fixes a
problem where we failed to distinguish between a type
that was written without any elaborated-type qualifiers,
such as a 'struct'/'class' tags and name spacifiers such as 'std::',
and one that has been stripped of any 'metadata' that identifies such,
the so called canonical types.
Example:
```
namespace foo {
struct A {};
A a;
};
```
If one were to print the type of `foo::a`, prior to this patch, this
would result in `foo::A`. This is how the type printer would have,
by default, printed the canonical type of A as well.
As soon as you add any name qualifiers to A, the type printer would
suddenly start accurately printing the type as written. This patch
will make it print it accurately even when written without
qualifiers, so we will just print `A` for the initial example, as
the user did not really write that `foo::` namespace qualifier.
2) This patch could expose a bug in some AST matcher. Matching types
is harder to get right when there is sugar involved. For example,
if you want to match a type against being a pointer to some type A,
then you have to account for getting a type that is sugar for a
pointer to A, or being a pointer to sugar to A, or both! Usually
you would get the second part wrong, and this would work for a
very simple test where you don't use any name qualifiers, but
you would discover is broken when you do. The usual fix is to
either use the matcher which strips sugar, which is annoying
to use as for example if you match an N level pointer, you have
to put N+1 such matchers in there, beginning to end and between
all those levels. But in a lot of cases, if the property you want
to match is present in the canonical type, it's easier and faster
to just match on that... This goes with what is said in 1), if
you want to match against the name of a type, and you want
the name string to be something stable, perhaps matching on
the name of the canonical type is the better choice.
3) This patch could exposed a bug in how you get the source range of some
TypeLoc. For some reason, a lot of code is using getLocalSourceRange(),
which only looks at the given TypeLoc node. This patch introduces a new,
and more common TypeLoc node which contains no source locations on itself.
This is not an inovation here, and some other, more rare TypeLoc nodes could
also have this property, but if you use getLocalSourceRange on them, it's not
going to return any valid locations, because it doesn't have any. The right fix
here is to always use getSourceRange() or getBeginLoc/getEndLoc which will dive
into the inner TypeLoc to get the source range if it doesn't find it on the
top level one. You can use getLocalSourceRange if you are really into
micro-optimizations and you have some outside knowledge that the TypeLocs you are
dealing with will always include some source location.
4) Exposed a bug somewhere in the use of the normal clang type class API, where you
have some type, you want to see if that type is some particular kind, you try a
`dyn_cast` such as `dyn_cast<TypedefType>` and that fails because now you have an
ElaboratedType which has a TypeDefType inside of it, which is what you wanted to match.
Again, like 2), this would usually have been tested poorly with some simple tests with
no qualifications, and would have been broken had there been any other kind of type sugar,
be it an ElaboratedType or a TemplateSpecializationType or a SubstTemplateParmType.
The usual fix here is to use `getAs` instead of `dyn_cast`, which will look deeper
into the type. Or use `getAsAdjusted` when dealing with TypeLocs.
For some reason the API is inconsistent there and on TypeLocs getAs behaves like a dyn_cast.
5) It could be a bug in this patch perhaps.
Let me know if you need any help!
Signed-off-by: Matheus Izvekov <mizvekov@gmail.com>
Differential Revision: https://reviews.llvm.org/D112374
AcceptedPublic
Currently CXXMethodDecl::isMoveAssignmentOperator() does not look though type
sugar and so if the parameter is a type alias it will not be able to detect
that the method is a move assignment operator. This PR fixes that and adds a set
of tests that covers that we correctly detect special member functions when
defaulting or deleting them.
This fixes: https://github.com/llvm/llvm-project/issues/56456
Differential Revision: https://reviews.llvm.org/D129591
When removing an r_brace that is the first token of an annotated line, if the
line above ends with a line comment, clang-format generates invalid code by
merging the tokens after the r_brace into the line comment.
Fixes#56488.
Differential Revision: https://reviews.llvm.org/D129742
Introducing the support for evaluating the constructor
of every element in an array. The idea is to record the
index of the current array member being constructed and
create a loop during the analysis. We looping over the
same CXXConstructExpr as many times as many elements
the array has.
Differential Revision: https://reviews.llvm.org/D127973
Add two options, `-fprofile-function-groups=N` and `-fprofile-selected-function-group=i` used to partition functions into `N` groups and only instrument the functions in group `i`. Similar options were added to xray in https://reviews.llvm.org/D87953 and the goal is the same; to reduce instrumented size overhead by spreading the overhead across multiple builds. Raw profiles from different groups can be added like normal using the `llvm-profdata merge` command.
Reviewed By: ianlevesque
Differential Revision: https://reviews.llvm.org/D129594
This reverts commit b7e77ff25f.
Reason: Broke sanitizer builds bots + libcxx. 'static assertion
expression is not an integral constant expression'. More details
available in the Phabricator review: https://reviews.llvm.org/D129048
While testing backports of
https://reviews.llvm.org/D129572#inline-1245936
commit 2240d72f15 ("[X86] initial -mfunction-return=thunk-extern support")
I noticed that one of my unit tests mistyped a function attribute. The
unit test was intended to test fn attr merging behavior, but with the
typo it was not. Small fixup.
Reviewed By: aaron.ballman, erichkeane
Differential Revision: https://reviews.llvm.org/D129691
In method `TypeRetrievingVisitor::VisitConcreteInt`, `ASTContext::getIntTypeForBitwidth` is used to get the type for `ConcreteInt`s.
However, the getter in ASTContext cannot handle the boolean type with the bit width of 1, which will make method `SVal::getType` return a Null `Type`.
In this patch, a check for this case is added to fix this problem by returning the bool type directly when the bit width is 1.
Differential Revision: https://reviews.llvm.org/D129737
The code would assume that SubstExpr() cannot fail on concept
specialization. This is incorret - we give up on some things after fatal
error occurred, since there's no value in doing futher work that the
user will not see anyway. In this case, this lead to crash.
The fatal error is simulated in tests with -ferror-limit=1, but this
could happen in other cases too.
Fixes https://github.com/llvm/llvm-project/issues/55401
Differential Revision: https://reviews.llvm.org/D129499
This patch rewords the static assert diagnostic output. Failing a
_Static_assert in C should not report that static_assert failed. This
changes the wording to be more like GCC and uses "static assertion"
when possible instead of hard coding the name. This also changes some
instances of 'static_assert' to instead be based on the token in the
source code.
Differential Revision: https://reviews.llvm.org/D129048
We consider an access to x.*pm as access of the same kind into x, and
an access to px->*pm as access of the same kind into *px. Previously we
missed reads and writes in the .* case, and operations to the pointed-to
data for ->* (we didn't miss accesses to the pointer itself, because
that requires an LValueToRValue cast that we treat independently).
We added support for overloaded operator->* in D124966.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D129514
With my version of the MSVC tools (14.11.25503), this was failing to
build because of missing declarations of `std::isalnum` and
`std::isdigit`. Include `<cctype>` to get these.
WG21 approved delimited escape sequences and named escape
sequences.
Adjust the extension warnings accordingly, and update
the release notes.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D129664
The new driver primarily allows us to support RDC-mode compilations with
proper linking. This is not needed for non-RDC mode compilation, but we
still would like the new driver to be able to handle this mode so we can
transition away from the old driver in the future. This patch adds the
necessary code to support creating a fatbinary for CUDA code generation
as well as removing old assumptions and errors about RDC-mode with the
new driver.
Reviewed By: tra
Differential Revision: https://reviews.llvm.org/D129655
clang-format's documentation documented the more general clang-format-diff.py
script. Add documentation for the less general but arguably easier-to-use
git integration as well.
Differential Revision: https://reviews.llvm.org/D129563
CStringChecker is using getByteLength to get the length of a string
literal. For targets where a "char" is 8-bits, getByteLength() and
getLength() will be equal for a C string, but for targets where a "char"
is 16-bits getByteLength() returns the size in octets.
This is verified in our downstream target, but we have no way to add a
test case for this case since there is no target supporting 16-bit
"char" upstream. Since this cannot have a test case, I'm asserted this
change is "correct by construction", and visually inspected to be
correct by way of the following example where this was found.
The case that shows this fails using a target with 16-bit chars is here.
getByteLength() for the string literal returns 4, which fails when
checked against "char x[4]". With the change, the string literal is
evaluated to a size of 2 which is a correct number of "char"'s for a
16-bit target.
```
void strcpy_no_overflow_2(char *y) {
char x[4];
strcpy(x, "12"); // with getByteLength(), returns 4 using 16-bit chars
}
```
This change exposed that embedded nulls within the string are not
handled. This is documented as a FIXME for a future fix.
```
void strcpy_no_overflow_3(char *y) {
char x[3];
strcpy(x, "12\0");
}
```
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D129269
Add `pcm-info` to the `target module dump` subcommands.
This dump command shows information about clang .pcm files. This command
effectively runs `clang -module-file-info` and produces identical output.
The .pcm file format is tightly coupled to the clang version. The clang
embedded in lldb is not guaranteed to match the version of the clang executable
available on the local system.
There have been times when I've needed to view the details about a .pcm file
produced by lldb's embedded clang, but because the clang executable was a
slightly different version, the `-module-file-info` invocation failed. With
this command, users can inspect .pcm files generated by lldb too.
Differential Revision: https://reviews.llvm.org/D129456
It's more natural to use uint8_t * (std::byte needs C++17 and llvm has
too much uint8_t *) and most callers use uint8_t * instead of char *.
The functions are recently moved into `llvm::compression::zlib::`, so
downstream projects need to make adaption anyway.
Those two DRs about the (copy) triviality of types with deleted special member functions are not implemented in Clang.
Document them as such.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D129583
Follow-up to 6626f6fec3, this fixes the handling of -MT
* If no targets are provided, we need to invent one since cc1 expects
the driver to have handled it. The default is to use -o, quoting as
necessary for a make target.
* Fix the splitting for empty string, which was incorrectly treated as
{""} instead of {}.
* Add a way to test this behaviour in clang-scan-deps.
Differential Revision: https://reviews.llvm.org/D129607
Summary:
We currently add the `-fgpu-rdc` flag twice. Once unconditionally for
both the host and device phases of compilation, and a second time only
for the host. When we moved to an unconditional addition of this flag it
the old one was most likely not removed. This patch simply removes the
redundant flag and changes no functionality.
Summary:
The previous patch moved some functoinality into a new function and
returned it. The vector contained move-only members. Newer compilers
should figure this out and I didn't notice any problems, but other ones
have problems. Explicitly move this vector to hopefully solve the issue.
Summary:
This patch adds the new `--wrapper-time-trace=` option to write a time
tracing JSON file indicating where time was spent in the linker wrapper.
We also reformat and group some of the existing code to make
constraining the scope easier for time tracing. We use the `--wrapper`
prefix to set this apart from the time tracing that lld may use.
Previous warning went on whenever a struct with a struct member with alignment => 16
was declared. This led to too many false positives and led to diagnostic lit failures
due to it being emitted too frequently. Only emit the warning when such a struct and
that struct contains a member that has an alignment of 16 bytes is passed to a caller
function since this is where the potential binary compatibility issue with XL 16.1.0
and older exists.
Reviewed By: sfertile, aaron.ballman
Differential Revision: https://reviews.llvm.org/D118350
This reverts commit bdc6974f92 because it
breaks all the LLDB tests that import the std module.
import-std-module/array.TestArrayFromStdModule.py
import-std-module/deque-basic.TestDequeFromStdModule.py
import-std-module/deque-dbg-info-content.TestDbgInfoContentDequeFromStdModule.py
import-std-module/forward_list.TestForwardListFromStdModule.py
import-std-module/forward_list-dbg-info-content.TestDbgInfoContentForwardListFromStdModule.py
import-std-module/list.TestListFromStdModule.py
import-std-module/list-dbg-info-content.TestDbgInfoContentListFromStdModule.py
import-std-module/queue.TestQueueFromStdModule.py
import-std-module/stack.TestStackFromStdModule.py
import-std-module/vector.TestVectorFromStdModule.py
import-std-module/vector-bool.TestVectorBoolFromStdModule.py
import-std-module/vector-dbg-info-content.TestDbgInfoContentVectorFromStdModule.py
import-std-module/vector-of-vectors.TestVectorOfVectorsFromStdModule.py
https://green.lab.llvm.org/green/view/LLDB/job/lldb-cmake/45301/
For MTE globals, we should have clang emit the attribute for all GV's
that it creates, and then use that in the upcoming AArch64 global
tagging IR pass. We need a positive attribute for this sanitizer (rather
than implicit sanitization of all globals) because it needs to interact
with other parts of LLVM, including:
1. Suppressing certain global optimisations (like merging),
2. Emitting extra directives by the ASM writer, and
3. Putting extra information in the symbol table entries.
While this does technically make the LLVM IR / bitcode format
non-backwards-compatible, nobody should have used this attribute yet,
because it's a no-op.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D128950
This patch adds a new field called EmittedDeferredDecls in CodeGenModule
that keeps track of decls that were deferred and have been emitted.
The intention of this patch is to solve issues in the incremental c++,
we'll lose info of decls that are lazily emitted when we undo their
usage.
See example below:
clang-repl> inline int foo() { return 42;}
clang-repl> int bar = foo();
clang-repl> %undo
clang-repl> int baz = foo();
JIT session error: Symbols not found: [ _Z3foov ]
error: Failed to materialize symbols: { (main, { baz, $.incr_module_2.inits.0,
orc_init_func.incr_module_2 }) }
Signed-off-by: Jun Zhang <jun@junz.org>
Differential Revision: https://reviews.llvm.org/D128782
Previously, `Status` was named after the enum type `Status` which caused the enum to be hidden by the non-type declaration of the `Status` field. This patch fixes this issue by using different names for the field and type.
Differential Revision: https://reviews.llvm.org/D129568
Introduce an off-by default `-Winvalid-utf8` warning
that detects invalid UTF-8 code units sequences in comments.
Invalid UTF-8 in other places is already diagnosed,
as that cannot appear in identifiers and other grammar constructs.
The warning is off by default as its likely to be somewhat disruptive
otherwise.
This warning allows clang to conform to the yet-to be approved WG21
"P2295R5 Support for UTF-8 as a portable source file encoding"
paper.
Reviewed By: aaron.ballman, #clang-language-wg
Differential Revision: https://reviews.llvm.org/D128059
Without this patch, clang will not wrap in an ElaboratedType node types written
without a keyword and nested name qualifier, which goes against the intent that
we should produce an AST which retains enough details to recover how things are
written.
The lack of this sugar is incompatible with the intent of the type printer
default policy, which is to print types as written, but to fall back and print
them fully qualified when they are desugared.
An ElaboratedTypeLoc without keyword / NNS uses no storage by itself, but still
requires pointer alignment due to pre-existing bug in the TypeLoc buffer
handling.
Signed-off-by: Matheus Izvekov <mizvekov@gmail.com>
Differential Revision: https://reviews.llvm.org/D112374
Summary:
A previous patch added the Task to the output filename when doing
`save-temps` the majority of cases there is only a single task so we
only add the task explicitly to differentiate it from the first one.
This reverts commit cc309721d2 because it
breaks the following tests on GreenDragon:
TestDataFormatterObjCCF.py
TestDataFormatterObjCExpr.py
TestDataFormatterObjCKVO.py
TestDataFormatterObjCNSBundle.py
TestDataFormatterObjCNSData.py
TestDataFormatterObjCNSError.py
TestDataFormatterObjCNSNumber.py
TestDataFormatterObjCNSURL.py
TestDataFormatterObjCPlain.py
TestDataFormatterObjNSException.py
https://green.lab.llvm.org/green/view/LLDB/job/lldb-cmake/45288/
There is a failing bot:
http://45.33.8.238/macm1/40002/step_7.txt
It looks to be failing because of a regex and how it handles whitespace,
so modifying the CHECK line slightly to account for that.
It is illegal to merge two `llvm.coro.save` calls unless their
`llvm.coro.suspend` users are also merged. Marks it "nomerge" for
the moment.
This reverts D129025.
Alternative to D129025, which affects other token type users like WinEH.
Reviewed By: ChuanqiXu
Differential Revision: https://reviews.llvm.org/D129530
There were two assertions in DefaultArgStorage::setInherited previously.
It requires the DefaultArgument is either empty or an argument value. It
would crash if it has a pointer refers to the previous declaration or
contains a chain to the previous declaration.
But there are edge cases could hit them actually. One is
InheritDefaultArguments.cppm that I found recently. Another one is pr31469.cpp,
which was created fives years ago.
This patch tries to fix the two failures by handling full cases in
DefaultArgStorage::setInherited.
This is guaranteed to not introduce any breaking change since it lives
in the path we wouldn't touch before. And the added assertions for
sameness should keep the correctness.
Reviewed By: v.g.vassilev
Differential Revision: https://reviews.llvm.org/D128974
parameters.
The current implementation to judge the similarity of TypeConstraint in
ASTContext::isSameTemplateParameter is problematic, it couldn't handle
the following case:
```C++
template <__integer_like _Tp, C<_Tp> Sentinel>
constexpr _Tp operator()(_Tp &&__t, Sentinel &&last) const {
return __t;
}
```
When we see 2 such declarations from different modules, we would judge
their similarity by `ASTContext::isSame*` methods. But problems come for
the TypeConstraint. Originally, we would profile each argument one by
one. But it is not right. Since the profiling result of `_Tp` would
refer to two different template type declarations. So it would get
different results. It is right since the `_Tp` in different modules
refers to different declarations indeed. So the same declaration in
different modules would meet incorrect our-checking results.
It is not the thing we want. We want to know if the TypeConstraint have
the same expression.
Reviewer: vsapsai, ilya-biryukov
Differential Revision: https://reviews.llvm.org/D129068
Summary:
Previous assumptions held that the LTO stage would only have a single
output. This is incorrect when using thinLTO which outputs multiple
files. Additionally there were some bugs with how we hanlded input that
cause problems when performing thinLTO. This patch addresses these
issues.
The performance of Thin-LTO is currently pretty bad. But I am content to
leave it that way as long as it compiles.
Between issues such as
https://github.com/llvm/llvm-project/issues/56323, the fact that this
lowering (unlike the code in amdgpu-to-rocdl) does not correctly set
up bounds checks (and thus will cause page faults on reads that might
need to be padded instead), and that fixing these problems would,
essentially, involve replicating amdgpu-to-rocdl, remove
--vector-to-rocdl for being broken. In addition, the lowering does not
support many aspects of transfer_{read,write}, like supervectors, and
may not work correctly in their presence.
We (the MLIR-based convolution generator at AMD) do not use this
conversion pass, nor are we aware of any other clients.
Migration strategies:
- Use VectorToLLVM
- If buffer ops are particularly needed in your application, use
amdgpu.raw_buffer_{load,store}
A VectorToAMDGPU pass may be introduced in the future.
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D129308
When building modules, override secondary outputs (dependency file,
dependency targets, serialized diagnostic file) in addition to the pcm
file path. This avoids inheriting per-TU command-line options that
cause non-determinism in the results (non-deterministic command-line for
the module build, non-determinism in which TU's .diag and .d files will
contain the module outputs). In clang-scan-deps we infer whether to
generate dependency or serialized diagnostic files based on an original
command-line. In a real build system this should be modeled explicitly.
Differential Revision: https://reviews.llvm.org/D129389
This was promised 5 years ago in https://reviews.llvm.org/D32796,
let's do it.
Both flags are still accepted. No behavior change except for which
form shows up in --help output and in dumps of internal state
(such as with RC_DEBUG_OPTIONS).
Differential Revision: https://reviews.llvm.org/D129226
Introduce an off-by default `-Winvalid-utf8` warning
that detects invalid UTF-8 code units sequences in comments.
Invalid UTF-8 in other places is already diagnosed,
as that cannot appear in identifiers and other grammar constructs.
The warning is off by default as its likely to be somewhat disruptive
otherwise.
This warning allows clang to conform to the yet-to be approved WG21
"P2295R5 Support for UTF-8 as a portable source file encoding"
paper.
Reviewed By: aaron.ballman, #clang-language-wg
Differential Revision: https://reviews.llvm.org/D128059
Normally we do not link the device libraries if the user passed
`nogpulib` we do this for the standard bitcode library. This behaviour
was not added when using the static library for LTO, causing it to
always be linked in. This patch fixes that.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D129534
C++20 deprecated ATOMIC_FLAG_INIT thinking it was deprecated in C when it
wasn't. It is expected to be undeprecated in C++23 as part of LWG3659
(https://wg21.link/LWG3659), which is currently Tentatively Ready.
This handles the case where the user includes <stdatomic.h> in C++ code in a
freestanding compile mode. The corollary libc++ changes are in
1544d1f9fd.
MacroUnexpander applies the structural formatting of expanded lines into
UnwrappedLines to the corresponding unexpanded macro calls, resulting in
UnwrappedLines for the macro calls the user typed.
Differential Revision: https://reviews.llvm.org/D88299
Summary:
We use the `--host-triple=` argument to manually set the target triple.
This was changed to include the `=` previously but was not included in
these additional test cases, causing it for fail on some unsupported
systems.
This patch adds the necessary changes required to bundle and wrap HIP
files. The bundling is done using `clang-offload-bundler` currently to
mimic `fatbinary` and the wrapping is done using very similar runtime
calls to CUDA. This still does not support managed / surface / texture
variables, that would require some additional information in the entry.
One difference in the codegeneration with AMD is that I don't check if
the handle is null before destructing it, I'm not sure if that's
required.
With this we should be able to support HIP with the new driver.
Depends on D128850
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D128914
This patch adds the small change required to output offloading entried
for HIP instead of CUDA. These should be placed in different sections so
because they need to be distinct to the offloading toolchain, otherwise
we'd have HIP trying to register CUDA kernels or vice-versa. This patch will
precede support for HIP in the linker wrapper.
Reviewed By: yaxunl, tra
Differential Revision: https://reviews.llvm.org/D128850
OpenMP supports multiple offloading toolchains and architectures. In
order to support this we originally used `getArgsForToolchain` to get
the arguments only intended for each toolchain. This allowed users to
manually specify if an `--offload-arch=` argument was intended for which
toolchain using `-Xopenmp-target=` or other methods. For example,
```
clang input.c -fopenmp -fopenmp-targets=nvptx64,amdgcn -Xopenmp-target=nvptx64 --offload-arch=sm_70 -Xopenmp-target=amdgcn --offload-arch=gfx908
```
However, this was causing problems with the AMDGPU toolchain. This is
because the AMDGPU toolchain for OpenMP uses an `amdgpu` arch to determine the
architecture. If this tool is not availible the compiler will exit with an error
even when manually specifying the architecture. This patch pulls out the logic in
`getArgsForToolchain` and specializes it for extracting `--offload-arch`
arguments to avoid this.
Reviewed By: JonChesterfield, yaxunl
Differential Revision: https://reviews.llvm.org/D129435
This patch adds OMPIRBuilder support for the simdlen clause for the
simd directive. It uses the simdlen support in OpenMPIRBuilder when
it is enabled in Clang. Simdlen is lowered by OpenMPIRBuilder by
generating the loop.vectorize.width metadata.
Reviewed By: jdoerfert, Meinersbur
Differential Revision: https://reviews.llvm.org/D129149
Summary:
This is an essential piece of infrastructure for us to be
continuously testing debug info with BOLT. We can't only make changes
to a test repo because we need to change debuginfo tests to call BOLT,
hence, this diff needs to sit in our opensource repo. But when upstreaming
to LLVM, this should be kept BOLT-only outside of LLVM. When upstreaming,
we need to git diff and check all folders that are being modified by our
commits and discard this one (and leave as an internal diff).
To test BOLT in debuginfo tests, configure it with -DLLVM_TEST_BOLT=ON.
Then run check-lldb and check-debuginfo.
Manual rebase conflict history:
https://phabricator.intern.facebook.com/D29205224https://phabricator.intern.facebook.com/D29564078https://phabricator.intern.facebook.com/D33289118https://phabricator.intern.facebook.com/D34957174
Test Plan:
tested locally
Configured with:
-DLLVM_ENABLE_PROJECTS="clang;lld;lldb;compiler-rt;bolt;debuginfo-tests"
-DLLVM_TEST_BOLT=ON
Ran test suite with:
ninja check-debuginfo
ninja check-lldb
Reviewers: #llvm-bolt
Subscribers: ayermolo, phabricatorlinter
Differential Revision: https://phabricator.intern.facebook.com/D35317341
Tasks: T92898286
Create an interface for writing SARIF documents from within clang:
The primary intent of this change is to introduce the interface
clang::SarifDocumentWriter, which allows incrementally adding
diagnostic data to a JSON backed document. The proposed interface is
not yet connected to the compiler internals, which will be covered in
future work. As such this change will not change the input/output
interface of clang.
This change also introduces the clang::FullSourceRange type that is
modeled after clang::SourceRange + clang::FullSourceLoc, this is useful
for packaging a pair of clang::SourceLocation objects with their
corresponding SourceManagers.
Previous discussions:
RFC for this change: https://lists.llvm.org/pipermail/cfe-dev/2021-March/067907.htmlhttps://lists.llvm.org/pipermail/cfe-dev/2021-July/068480.html
SARIF Standard (2.1.0):
https://docs.oasis-open.org/sarif/sarif/v2.1.0/os/sarif-v2.1.0-os.html
Differential Revision: https://reviews.llvm.org/D109701
This addresses [cpp.include]/7
(when encountering #include header-name)
If the header identified by the header-name denotes an importable header, it
is implementation-defined whether the #include preprocessing directive is
instead replaced by an import directive.
In this implementation, include translation is performed _only_ for headers
in the Global Module fragment, so:
```
module;
#include "will-be-translated.h" // IFF the header unit is available.
export module M;
#include "will-not-be-translated.h" // even if the header unit is available
```
The reasoning is that, in general, includes in the module purview would not
be validly translatable (they would have to immediately follow the module
decl and without any other intervening decls). Otherwise that would violate
the rules on contiguous import directives.
This would be quite complex to track in the preprocessor, and for relatively
little gain (the user can 'import "will-not-be-translated.h";' instead.)
TODO: This is one area where it becomes increasingly difficult to disambiguate
clang modules in C++ from C++ standard modules. That needs to be addressed in
both the driver and the FE.
Differential Revision: https://reviews.llvm.org/D128981
Otherwise these functions are not instantiated and we end up with an undefined
symbol.
Fix#55560
Differential Revision: https://reviews.llvm.org/D128119
This patch adds the ability to use `-mllvm` options in the linker
wrapper when performing bitcode linking or the module compilation.
This is done by passing in the LLVM argument to the clang-linker-wrapper
tool. Inside the linker-wrapper tool we invoke the `CommandLine` parser
solely for forwarding command line options to the `clang-linker-wrapper`
to the LLVM tools that also use the `CommandLine` parser. The actual
arguments to the linker wrapper are parsed using the `Opt` library
instead.
For example, in the following command the `CommandLine` parser will attempt to
parse `abc`, while the `opt` parser takes `-mllvm <arg>` and ignores it so it is
not passed to the linker arguments.
```
clang-linker-wrapper -mllvm -abc -- <linker-args>
```
As far as I can tell this is the easiest way to forward arguments to
LLVM tool invocations. If there is a better way to pass these arguments
(such as through the LTO config) let me know.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D129424
Fuchsia already uses libunwind, but it does so implicitly via libc++.
This change makes the unwinder choice explicit.
Differential Revision: https://reviews.llvm.org/D127887
The LTO pipeline handles its errors using the diagnostics handler
callback function. We were not checking the results of these errors and
not properly returning an error code in the linker wrapper when errors
occured inside of the LTO pipeline. This patch adds a simple boolean
flag to indicate if the LTO backend failed to any reason and quit.
Reviewed By: ye-luo
Differential Revision: https://reviews.llvm.org/D129423
This provides updates to
[class.mfct]:
Pre C++20 [class.mfct]p2:
A member function may be defined (8.4) in its class definition, in
which case it is an inline member function (7.1.2)
Post C++20 [class.mfct]p1:
If a member function is attached to the global module and is defined
in its class definition, it is inline.
and
[class.friend]:
Pre-C++20 [class.friend]p5
A function can be defined in a friend declaration of a
class . . . . Such a function is implicitly inline.
Post C++20 [class.friend]p7
Such a function is implicitly an inline function if it is attached
to the global module.
We add the output of implicit-inline to the TextNodeDumper, and amend
a couple of existing tests to account for this, plus add tests for the
cases covered above.
Differential Revision: https://reviews.llvm.org/D129045
The test are to check that we call the correctly mangled CTORs, so that
the return values from them are irrelevant. I forgot that some targets
return a pointer, apologies for the breakage.
Introduce an off-by default `-Winvalid-utf8` warning
that detects invalid UTF-8 code units sequences in comments.
Invalid UTF-8 in other places is already diagnosed,
as that cannot appear in identifiers and other grammar constructs.
The warning is off by default as its likely to be somewhat disruptive
otherwise.
This warning allows clang to conform to the yet-to be approved WG21
"P2295R5 Support for UTF-8 as a portable source file encoding"
paper.
Reviewed By: aaron.ballman, #clang-language-wg
Differential Revision: https://reviews.llvm.org/D128059
Currently we only implement this for the Itanium ABI since the correct
mangling for the initializers in other ABIs is not yet known.
Intended result:
For a module interface [which includes partition interface and implementation
units] (instead of the generic CXX initializer) we emit a module init that:
- wraps the contained initializations in a control variable to ensure that
the inits only happen once, even if a module is imported many times by
imports of the main unit.
- calls module initializers for imported modules first. Note that the
order of module import is not significant, and therefore neither is the
order of imported module initializers.
- We then call initializers for the Global Module Fragment (if present)
- We then call initializers for the current module.
- We then call initializers for the Private Module Fragment (if present)
For a module implementation unit, or a non-module TU that imports at least one
module we emit a regular CXX init that:
- Calls the initializers for any imported modules first.
- Then proceeds as normal with remaining inits.
For all module unit kinds we include a global constructor entry, this allows
for the (in most cases unusual) possibility that a module object could be
included in a final binary without a specific call to its initializer.
Implementation:
- We provide the module pointer in the AST Context so that CodeGen can act
on it and its sub-modules.
- We need to account for module build lines like this:
` clang -cc1 -std=c++20 Foo.pcm -emit-obj -o Foo.o` or
` clang -cc1 -std=c++20 -xc++-module Foo.cpp -emit-obj -o Foo.o`
- in order to do this, we add to ParseAST to set the module pointer in
the ASTContext, once we establish that this is a module build and we
know the module pointer. To be able to do this, we make the query for
current module public in Sema.
- In CodeGen, we determine if the current build requires a CXX20-style module
init and, if so, we defer any module initializers during the "Eagerly
Emitted" phase.
- We then walk the module initializers at the end of the TU but before
emitting deferred inits (which adds any hidden and static ones, fixing
https://github.com/llvm/llvm-project/issues/51873 ).
- We then proceed to emit the deferred inits and continue to emit the CXX
init function.
Differential Revision: https://reviews.llvm.org/D126189
Add a fix-it for the common case of setters/constructors using parameters with the same name as fields
```lang=c++
struct A{
int X;
A(int X) { /*this->*/X = X; }
void setX(int X) { /*this->*/X = X;
};
```
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D129202
Some tests perform deep recursion, which requires a larger pthread stack
size than the relatively low default of 192 KiB for 64-bit processes on
AIX. The `AIXTHREAD_STK` environment variable provides a non-intrusive
way to request a larger pthread stack size for the tests. The required
pthread stack size depends on the build configuration.
A 4 MiB default is generous compared to the 512 KiB of macOS; however,
it is known that some compilers on AIX produce code that uses
comparatively more stack space.
This patch expands the solution from D65688 to apply to all Clang LIT
tests.
This also reverts commit c3c75d805c,
"[clang][test] Mark test arm-float-abi-lto.c unsupported on AIX".
The problem was caused by the test running up against the per-thread
stack limit on AIX. This is resolved by having the tests run with
`AIXTHREAD_STK` set for 4 MiB.
Reviewed By: xingxue
Differential Revision: https://reviews.llvm.org/D129165
We currently have an option to select C++ ABI and C++ library for tests
but there are runtimes that use C++ library, specifically ORC and XRay,
which aren't covered by existing options. This change introduces a new
option to control the use of C++ libray for these runtimes.
Ideally, this option should become the default way to select C++ library
for all of compiler-rt replacing the existing options (the C++ ABI
option could remain as a hidden internal option).
Differential Revision: https://reviews.llvm.org/D128036
The offload packager embeds the features in the offloading binary when
performing LTO. This had an incorrect interaction with the
`--cuda-feature` option because we weren't deriving the features from
the CUDA toolchain arguments when it was being specified. This patch
fixes this so the features are correctly overrideen when using this
argument.
However, this brings up a question of how best to handle conflicting
target features. The user could compile many libraries with different
features, in this case we do not know which one to pick. This was not
previously a problem when we simply passed the features in from the CUDA
installation at link-link because we just defaulted to whatever was
current on the system.
Reviewed By: ye-luo
Differential Revision: https://reviews.llvm.org/D129393
This patch removes some uses of string savers that are no-longer needed.
We also create a new string saver when linking bitcode files. It seems
that occasionally the symbol string references can go out of scope when
they are added to the LTO input so we need to save these names that are
used for symbol resolution. Additionally, a previous patch added new
logic for handling bitcode libraries, but failed to actually add them to
the input. This bug has been fixed.
Fixes#56445
Reviewed By: ye-luo
Differential Revision: https://reviews.llvm.org/D129383
The two first parameters of checkPreprocessorOptions are "PPOpts, ExistingPPOpts".
All other callers of the function pass them consistently.
This avoids confusion when working on the code.
Differential Revision: https://reviews.llvm.org/D129277
This is the first part of a plan to ship experimental features
by default while guarding them behind a compiler flag to avoid
users accidentally depending on them. Subsequent patches will
also encompass incomplete features (such as <format> and <ranges>)
in that categorization. Basically, the idea is that we always
build and ship the c++experimental library, however users can't
use what's in it unless they pass the `-funstable` flag to Clang.
Note that this patch intentionally does not start guarding
existing <experimental/FOO> content behind the flag, because
that would merely break users that might be relying on such
content being in the headers unconditionally. Instead, we
should start guarding new TSes behind the flag, and get rid
of the existing TSes we have by shipping their Standard
counterpart.
Also, this patch must jump through a few hoops like defining
_LIBCPP_ENABLE_EXPERIMENTAL because we still support compilers
that do not implement -funstable yet.
Differential Revision: https://reviews.llvm.org/D128927
Previously we added the `push_target_tripcount` function to send the
loop tripcount to the device runtime so we knew how to configure the
teams / threads for execute the loop for a teams distribute construct.
This was implemented as a separate function mostly to avoid changing the
interface for backwards compatbility. Now that we've changed it anyway
and the new interface can take an arbitrary number of arguments via the
struct without changing the ABI, we can move this to the new interface.
This will simplify the runtime by removing unnecessary state between
calls.
Depends on D128550
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D128816
This patch changes the code we generate to enter a target region on the
device. This is in-line with the new definition in the runtime that was
added previously. Additionally we implement this in the OpenMPIRBuilder
so that this code can be shared with Flang in the future.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D128550
* Refactor compression namespaces across the project, making way for a possible
introduction of alternatives to zlib compression.
Changes are as follows:
* Relocate the `llvm::zlib` namespace to `llvm::compression::zlib`.
Reviewed By: MaskRay, leonardchan, phosek
Differential Revision: https://reviews.llvm.org/D128953
Update the references to the old Mailman mailing lists to point to Discourse forums.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D128766
The existing provision is not sufficient, it did not allow for the cases
where an implementation partition includes the primary module interface,
or for the case that an exported interface partition is contains a decl
that is then implemented in a regular implementation unit.
It is somewhat unfortunate that we have to compare top level module names
to achieve this, since built modules are not necessarily available.
TODO: It might be useful to cache a hash of the primary module name if
this test proves to be a significant load.
Differential Revision: https://reviews.llvm.org/D127624
Summary:
The previous path reworked some handling of temporary files which
exposed some bugs related to capturing local state by reference in the
callback labmda. Squashing this by copying in everything instead. There
was also a problem where the argument name was changed for
`--bitcode-library=` but clang still used `--target-library=`.
Summary:
This patch reworks the command line argument handling in the linker
wrapper from using the LLVM `cl` interface to using the `Option`
interface with TableGen. This has several benefits compared to the old
method.
We use arguments from the linker arguments in the linker
wrapper, such as the libraries and input files, this allows us to
properly parse these. Additionally we can now easily set up aliases to
the linker wrapper arguments and pass them in the linker input directly.
That is, pass an option like `cuda-path=` as `--offload-arg=cuda-path=`
in the linker's inputs. This will allow us to handle offloading
compilation in the linker itself some day. Finally, this is also a much
cleaner interface for passing arguments to the individual device linking
jobs.
See discussion here:
https://github.com/llvm/llvm-project/issues/55982
And the RFC here:
https://discourse.llvm.org/t/rfc-disable-clang-format-in-the-clang-test-tree/63498/2
We don't generally expect test files to be formatted according to the
style guide. Indeed, some tests may require specific formatting for the
purposes of the test.
When tests intentionally do not conform to the "correct" formatting,
this causes errors in the CI, which can drown out real errors and causes
people to stop trusting the CI over time.
From the history of the clang/test/.clang-format file, it looks as if
there have been attempts to make clang-format do a subset of formatting
that would be useful for tests. However, it looks as if it's hard to
make clang-format do exactly the right thing -- see the back-and-forth
between
13316a7
and
7b5bddf.
These changes disable the .clang-format file for clang/test, llvm/test,
and clang-tools-extra/test.
Fixes#55982
Differential Revision: https://reviews.llvm.org/D128706
Previously in D99179, I tried to construct debug information for
coroutine frames in the middle end to enhance the debugability for
coroutines. But I forget to add ReleaseNotes to hint people and
documents to help people to use. My bad. @probinson revealed this in
https://github.com/llvm/llvm-project/issues/55916.
So I try to add the use document now.
Reviewed By: erichkeane
Differential Revision: https://reviews.llvm.org/D127626
See https://github.com/cplusplus/draft/pull/5204 for a detailed
background.
Simply, the test redundant-template-default-arg.cpp attached to this
patch should be accepted instead of being complained about the
redefinition.
Reviewed By: urnathan, rsmith, ChuanqiXu
Differential Revision: https://reviews.llvm.org/D118034
Windows has some issues when we try to use `__attribute__((weak))` in
JIT, so we disabled that. But it's not worth to disable the whole test
just for this single feature. This patch split that part from the
original test so we can keep testing stuff that normally working in
Windows.
Signed-off-by: Jun Zhang <jun@junz.org>
Differential Revision: https://reviews.llvm.org/D129250
There's code in clang/lib/Driver/ToolChains/Gnu.cpp for Clang to use Gentoo's include and lib paths, but this is missing for mingw, meaning that any C++ programs using the STL will fail to compile.
See https://bugs.gentoo.org/788430
Differential Revision: https://reviews.llvm.org/D111081
This reverts commit 19e21887eb. I
accidentally landed the non-final version of the patch that used
decomposition declarations (not yet usable in LLVM/Clang source).
A truth assignment to atomic boolean values which satisfy `Constraints` will be returned if found by the solver.
This gives us more information which can be helpful for debugging or constructing warning messages.
Reviewed By: hlopko, gribozavr2, sgatev
Differential Revision: https://reviews.llvm.org/D129180
When we recover from a crash in a module compilation thread, we need to
ensure any output streams owned by the ASTConsumer (e.g. in
RawPCHContainerGenerator) are deleted before we call clearOutputFiles().
This has the same theoretical issues with proxy streams that Duncan
discusses in the commit 2d13386783. In practice, this was observed
as a use-after-free crash on a downstream branch that uses such a proxy
stream in this code path. Add an assertion so it won't regress.
Differential Revision: https://reviews.llvm.org/D129220
rdar://96525032
Summary:
A previous patch added a new ELF section type for LLVM offloading. We
should use this when extracting the offloading sections rather than
checking the string. This pach also removes the implicit support for
COFF and MACH-O because we don't support those currently and should not
be included.
This patchs adds a new metadata kind `exclude` which implies that the
global variable should be given the necessary flags during code
generation to not be included in the final executable. This is done
using the ``SHF_EXCLUDE`` flag on ELF for example. This should make it
easier to specify this flag on a variable without needing to explicitly
check the section name in the target backend.
Depends on D129053 D129052
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D129151
Currently we use the `embedBufferInModule` function to store binary
strings containing device offloading data inside the host object to
create a fatbinary. In the case of LTO, we need to extract this object
from the LLVM-IR. This patch adds a metadata node for the embedded
objects containing the embedded pointers and the sections they were
stored at. This should create a cleaner interface for identifying these
values.
In the future it may be worthwhile to also encode an `ID` in the
metadata corresponding to the object's special section type if relevant.
This would allow us to extract the data from an object file and LLVM-IR
using the same ID.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D129033
Move user specified inputs to the linking group in case
they and the stardard libraries have mutual reference.
Reviewed By: benshi001
Differential Revision: https://reviews.llvm.org/D127501
D127209 fixed LLVM to bring it in line with the AAPCS. The fix affects
functions where the first SVE parameter appears in the 9th or later
arguments, and the function does not return an SVE type.
Differential Revision: https://reviews.llvm.org/D129135
This reverts commit 4174f0ca61.
Also revert follow-up "[Clang] Fix invalid utf-8 detection"
This reverts commit bf45e27a67.
The second commit broke tests, see comments on
https://reviews.llvm.org/D129223, and it sounds like the first
commit isn't valid without the second one. So reverting both for now.
The length of valid codepoints was incorrectly
calculated which was not caught before because the
absence of tests for the valid codepoints scenario.
Differential Revision: https://reviews.llvm.org/D129223
Introduce an off-by default `-Winvalid-utf8` warning
that detects invalid UTF-8 code units sequences in comments.
Invalid UTF-8 in other places is already diagnosed,
as that cannot appear in identifiers and other grammar constructs.
The warning is off by default as its likely to be somewhat disruptive
otherwise.
This warning allows clang to conform to the yet-to be approved WG21
"P2295R5 Support for UTF-8 as a portable source file encoding"
paper.
Reviewed By: aaron.ballman, #clang-language-wg
Differential Revision: https://reviews.llvm.org/D128059
After checking the libc++abi.dylib shipped in macOS 10.13, I can confirm
that it contains the align_val_t variants of operator new and operator
delete. However, the libc++abi.dylib shipped on macOS 10.12 does not.
Differential Revision: https://reviews.llvm.org/D129198
Proposing to move the check for scalar MASS conversion from constructor
of PPCTargetLowering to the lowerLibCallBase function which decides
about the lowering.
The Target machine option Options.PPCGenScalarMASSEntries is set in
PPCTargetMachine.cpp. But an object of the class PPCTargetLowering
is created in one of the included header files. So, the constructor will run
before setting PPCGenScalarMASSEntries to correct value. So, we cannot
check this option in the constructor.
Differential: https://reviews.llvm.org/D128653
Reviewer: @bmahjour
D127041 introduced the support for `fmax` and `fmin` such that we can also reprent
`atomic compare` and `atomic compare capture` with `atomicrmw` instruction. This
patch simply lifts the limitation we set before.
Depend on D127041.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D127042
Introduce an off-by default `-Winvalid-utf8` warning
that detects invalid UTF-8 code units sequences in comments.
Invalid UTF-8 in other places is already diagnosed,
as that cannot appear in identifiers and other grammar constructs.
The warning is off by default as its likely to be somewhat disruptive
otherwise.
This warning allows clang to conform to the yet-to be approved WG21
"P2295R5 Support for UTF-8 as a portable source file encoding"
paper.
Reviewed By: aaron.ballman, #clang-language-wg
Differential Revision: https://reviews.llvm.org/D128059
Debugify in OriginalDebugInfo mode, introduced with D82545,
runs only with legacy PassManager.
This patch enables this utility for the NewPM.
Differential Revision: https://reviews.llvm.org/D115351
Add support for the RDPRU instruction on Zen2 processors.
User-facing features:
- Clang option -m[no-]rdpru to enable/disable the feature
- Support is implicit for znver2/znver3 processors
- Preprocessor symbol __RDPRU__ to indicate support
- Header rdpruintrin.h to define intrinsics
- "rdpru" mnemonic supported for assembler code
Internal features:
- Clang builtin __builtin_ia32_rdpru
- IR intrinsic @llvm.x86.rdpru
Differential Revision: https://reviews.llvm.org/D128934
Clang only allows you to use __attribute__((format)) on variadic functions. There are legit use cases for __attribute__((format)) on non-variadic functions, such as:
(1) variadic templates
```c++
template<typename… Args>
void print(const char *fmt, Args… &&args) __attribute__((format(1, 2))); // error: format attribute requires variadic function
```
(2) functions which take fixed arguments and a custom format:
```c++
void print_number_string(const char *fmt, unsigned number, const char *string) __attribute__((format(1, 2)));
// ^error: format attribute requires variadic function
void foo(void) {
print_number_string(“%08x %s\n”, 0xdeadbeef, “hello”);
print_number_string(“%d %s”, 0xcafebabe, “bar”);
}
```
This change allows Clang users to attach __attribute__((format)) to non-variadic functions, including functions with C++ variadic templates. It replaces the error with a GCC compatibility warning and improves the type checker to ensure that received arrays are treated like pointers (this is a possibility in C++ since references to template types can bind to arrays).
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D112579
rdar://84629099
Add missing dependency on lli when building compiler-rt with
LLVM_BUILD_EXTERNAL_COMPILER_RT. Previously we would non-deterministically fail
the tests due to the missing binary.
This is essentially identical to 0e5ea403e8, which added an earlier dependence
on llvm-jitlink.
rdar://96467892
GCC automatically links math library by adding `-lm` to linker command
line, since C++ runtime `libstdc++` requires libm, so add it to
`RISCVToochain` as well.
Differential Revision: https://reviews.llvm.org/D129065
Based on feedback from @Aaron.Ballman.
Remove the unused static ID char (can re-add it later if needed).
Add test to cover some invalid HLSL vector instantations ensuring
that the appropriate error messages are generated.
We use LLD to perform AMDGPU linking. This linker accepts some arguments
through the `-plugin-opt` facilities. These options match what `Clang`
will output when given the same input.
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D128923
Depends on D128068.
Added a new test code that fails an assertion in the baseline.
That is because `getAPSIntType` works only with integral types.
Differential Revision: https://reviews.llvm.org/D126779
In `RegionStore::getBinding` we call `evalCast` unconditionally to align
the stored value's type to the one that is being queried. However, the
stored type might be the same, so we may end up having redundant
`SymbolCasts` emitted.
The solution is to check whether the `to` and `from` type are the same
in `makeNonLoc`.
Note, we can't just do type equivalence check at the beginning of `evalCast`
because when `evalCast` is called from `getBinding` then the original type
(`OriginalTy`) is not set, so one operand is missing for the comparison. In
`evalCastSubKind(nonloc::SymbolVal)` when the original type is not set,
we get the `from` type via `SymbolVal::getType()`.
Differential Revision: https://reviews.llvm.org/D128068
HLSL vector types are ext_vector types, but they are also exposed via a
template syntax `vector<T, #>`. This is morally equavalent to the code:
```c++
template <typename T, int Size>
using vector = T __attribute__((ext_vector_type(Size)))
```
The problem is that templates aren't supported before HLSL 2021, and
type aliases still aren't supported in HLSL.
To resolve this (and other issues where HLSL can't represent its own
types), we rely on an external AST & Sema source being registered for
HLSL code.
This patch adds the HLSLExternalSemaSource and registers the vector
type alias.
Depends on D127802
Differential Revision: https://reviews.llvm.org/D128012
This reverts commit 4e545bdb35.
The newly added test is the third infinite combine loop caused by
this change. In this case, it's a combination of the branch to
common dest and jump threading folds that keeps peeling off loop
iterations.
The core problem here is that we ideally would not thread over
loop backedges, both because it is potentially non-profitable
(it may break canonical loop structure) and because it may result
in these kinds of loops. Unfortunately, due to the lack of a
dominator tree in SimplifyCFG, there is no good way to prevent
this. While we have LoopHeaders, this is an optional structure and
we don't do a good job of keeping it up to date. It would be fine
for a profitability check, but is not suitable for a correctness
check.
So for now I'm just giving up here, as I don't see a good way to
robustly prevent infinite combine loops.
Fixes https://github.com/llvm/llvm-project/issues/56203.
This removes creation of udiv/sdiv/urem/srem constant expressions,
in preparation for their removal. I've added a
ConstantExpr::isDesirableBinOp() predicate to determine whether
an expression should be created for a certain operator.
With this patch, div/rem expressions can still be created through
explicit IR/bitcode, forbidding them entirely will be the next step.
Differential Revision: https://reviews.llvm.org/D128820
Treat `std::nullptr_t` as a regular scalar type to avoid tripping
assertions when analyzing code that uses `std::nullptr_t`.
Differential Revision: https://reviews.llvm.org/D129097
When doing CTU analysis setup you pre-compile .cpp to .ast and then
you run clang-extdef-mapping on the .cpp file as well. This is a
pretty slow process since we have to recompile the file each time.
With this patch you can now run clang-extdef-mapping directly on
the .ast file. That saves a lot of time.
I tried this on llvm/lib/AsmParser/Parser.cpp and running
extdef-mapping on the .cpp file took 5.4s on my machine.
While running it on the .ast file it took 2s.
This can save a lot of time for the setup phase of CTU analysis.
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D128704
This patch adds support for Arm's Cortex-M85 CPU. The Cortex-M85 CPU is
an Arm v8.1m Mainline CPU, with optional support for MVE and PACBTI,
both of which are enabled by default.
Parts have been coauthored by by Mark Murray, Alexandros Lamprineas and
David Green.
Differential Revision: https://reviews.llvm.org/D128415
These are not mentioned in the OpenCL C Specification nor in the
OpenCL Extension Specification.
Differential Revision: https://reviews.llvm.org/D128436
...that had temporarily regressed with (since reverted)
<886715af96>
"[clang] Introduce -fstrict-flex-arrays=<n> for stricter handling of flexible
arrays", and had then been seen to cause issues in the wild:
For one, the HarfBuzz project has various "fake" flexible array members of the
form
> Type arrayZ[HB_VAR_ARRAY];
in <https://github.com/harfbuzz/harfbuzz/blob/main/src/hb-open-type.hh>, where
HB_VAR_ARRAY is a macro defined as
> #ifndef HB_VAR_ARRAY
> #define HB_VAR_ARRAY 1
> #endif
in <https://github.com/harfbuzz/harfbuzz/blob/main/src/hb-machinery.hh>.
For another, the Firebird project in
<https://github.com/FirebirdSQL/firebird/blob/master/src/lock/lock_proto.h> uses
a trailing member
> srq lhb_hash[1]; // Hash table
as a "fake" flexible array, but declared in a
> struct lhb : public Firebird::MemoryHeader
that is not a standard-layout class (because the Firebird::MemoryHeader base
class also declares non-static data members).
(The second case is specific to C++. Extend the test setup so that all the
other tests are now run for both C and C++, just in case the behavior could ever
start to diverge for those two languages.)
A third case where -fsanitize=array-bounds differs from -Warray-bounds (and
which is also specific to C++, but which doesn't appear to have been encountered
in the wild) is when the "fake" flexible array member's size results from
template argument substitution.
Differential Revision: https://reviews.llvm.org/D128783
RVV C intrinsics use pointers to scalar for base address and their corresponding
IR intrinsics but use pointers to vector. It makes some vector load intrinsics
need specific ManualCodegen and MaskedManualCodegen to just add bitcast for
transforming to IR.
For simplifying riscv_vector.td, the patch make RISCVEmitter detect pointer
operands and bitcast them.
Reviewed By: kito-cheng
Differential Revision: https://reviews.llvm.org/D129043
I think that these conditions are unnecessary because in VisitClassTemplateDecl we import the definition via the templated CXXRecordDecl and in VisitVarTemplateDecl via the templated VarDecl. These are named ToTemplted and DTemplated respectively.
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D128608
Summary:
Currently we just check the extension to set the image kind. This
incorrectly labels the `.o` files created during LTO as object files.
This patch simply adds a check for the bitcode magic bytes instead.
- Update `clang-format --help` output after b1f0efc06a.
- Update `clang-format-diff.py` help text, which apparently hasn't
been updated in a while. Since git and svn examples are now part
of the help text, remove them in the text following the help text.
Differential Revision: https://reviews.llvm.org/D129050
Break after a constructor initializer colon only if it's not followed by a
comment on the same line.
Fixes#41128.
Fixes#43246.
Differential Revision: https://reviews.llvm.org/D129057
When we do profiling in ASTContext::getAutoType, it wouldn't think about
the canonical declaration for the type constraint. It is bad since it
would cause a negative ODR mismatch while we already know the type
constraint declaration is a redeclaration for the previous one. Also it shouldn't be
bad to use the canonical declaration here.
If clang modules are not enabled it becomes unnecessary to read the session timestamp file in order
to pass `-fbuild-session-timestamp` to the `cc1` invocation.
Differential Revision: https://reviews.llvm.org/D129030
This reverts 3668d1264e
As far as we know, `__attribute__((weak))` support has been really bad
in runtimeldyld, so we just disable it in Windows at this moment. This
should fix the angry Windows buildbot.
Differential Revision: https://reviews.llvm.org/D129042
This is a recommit of b822efc740,
reverted in dc34d8df4c. The commit caused
fails because the test ast-print-fp-pragmas.c did not specify particular
target, and it failed on targets which do not support constrained
intrinsics. The original commit message is below.
AST does not have special nodes for pragmas. Instead a pragma modifies
some state variables of Sema, which in turn results in modified
attributes of AST nodes. This technique applies to floating point
operations as well. Every AST node that can depend on FP options keeps
current set of them.
This technique works well for options like exception behavior or fast
math options. They represent instructions to the compiler how to modify
code generation for the affected nodes. However treatment of FP control
modes has problems with this technique. Modifying FP control mode
(like rounding direction) usually requires operations on hardware, like
writing to control registers. It must be done prior to the first
operation that depends on the control mode. In particular, such
operations are required for implementation of `pragma STDC FENV_ROUND`,
compiler should set up necessary rounding direction at the beginning of
compound statement where the pragma occurs. As there is no representation
for pragmas in AST, the code generation becomes a complicated task in
this case.
To solve this issue FP options are kept inside CompoundStmt. Unlike to FP
options in expressions, these does not affect any operation on FP values,
but only inform the codegen about the FP options that act in the body of
the statement. As all pragmas that modify FP environment may occurs only
at the start of compound statement or at global level, such solution
works for all relevant pragmas. The options are kept as a difference
from the options in the enclosing compound statement or default options,
it helps codegen to set only changed control modes.
Differential Revision: https://reviews.llvm.org/D123952
I used a script to reuse existing check lines rather than creating new
ones. There are more opportunities to reduce the line count but the
"check generated functions" logic makes that somewhat tricky.
FWIW, we really should redo the update script with all these use cases
in mind...
Differential Revision: https://reviews.llvm.org/D128686
region with implicit default inside the member function.
This is to fix assert when field is referenced in OpenMP region with
default (first|private) clause inside member function.
The problem of assert is that the capture is not generated for the field.
This patch is to generate capture when the field is used with implicit
default, use it in the code, and save the capture off to make sure it is
considered from that point and add first/private clauses.
1> Add new field ImplicitDefaultFirstprivateFDs in SharingMapTy, used to
store generated capture fields info.
2> In function isOpenMPCaptureDecl: the caputer is generated and saved
in ImplicitDefaultFirstprivateFDs.
3> Add new help functions:
getImplicitFDCapExprDecl
isImplicitDefaultFirstprivateFD
addImplicitDefaultFirstprivateFD
4> Add addition argument in hasDSA to check default attribute for
default(first|private).
5> The isImplicitDefaultFirstprivateFD is used in VisitDeclRefExpr to
build the implicit clause.
6> Add new parameter "Context" for buildCaptureDecl, due to when capture
field, the parent context is needed to be used.
7> Change in isOpenMPPrivateDecl where stop propagate the capture from
the enclosing region for private variable.
8> In ActOnOpenMPFirstprivate/ActOnOpenMPPrivate, using captured info
to generate first|private clause.
9> Add new function isOpenMPRebuildMemberExpr: use to determine if field
needs to be rebuild during template instantiation.
Differential Revision: https://reviews.llvm.org/D127803
This is a preprocessor callback focused on the lexed file changing, without conflating effects of line number directives and other pragmas.
A client that only cares about what files the lexer processes, like dependency generation, can use this more straightforward
callback instead of `PPCallbacks::FileChanged()`. Clients that want the pragma directive effects as well can keep using `FileChanged()`.
A use case where `PPCallbacks::LexedFileChanged()` is particularly simpler to use than `FileChanged()` is in a situation
where a client wants to keep track of lexed file changes that include changes from/to the predefines buffer, where it becomes
unnecessary complicated trying to use `FileChanged()` while filtering out the pragma directives effects callbacks.
Also take the opportunity to provide information about the prior `FileID` the `Lexer` moved from, even when entering a new file.
Differential Revision: https://reviews.llvm.org/D128947
Fuchsia already uses libunwind, but it does so implicitly via libc++.
This change makes the unwinder choice explicit.
Differential Revision: https://reviews.llvm.org/D127887
This patch gives basic parsing and semantic support for
"parallel masked taskloop simd" construct introduced in
OpenMP 5.1 (section 2.16.10)
Differential Revision: https://reviews.llvm.org/D128946
This reverts commit d4d47e574e.
This fixes the lldb crash that was observed by ensuring that our
friend-'template contains reference to' TreeTransform properly handles a
TemplateDecl.
The CGProfilePass needs to be run during FullLTO compilation at link
time to emit the .llvm.call-graph-profile section to the compiled LTO
object file. Currently, it is being run only during the initial
LTO-prelink compilation stage (to produce the bitcode files to be
consumed by the linker) and so the section is not produced.
ThinLTO is not affected because:
- For ThinLTO-prelink compilation the CGProfilePass pass is not run
because ThinLTO-prelink passes are added via
buildThinLTOPreLinkDefaultPipeline. Normal and FullLTO-prelink
passes are both added via buildPerModuleDefaultPipeline which uses
the LTOPreLink parameter to customize its behavior for the
FullLTO-prelink pass differences.
- ThinLTO backend compilation phase adds the CGProfilePass (see:
buildModuleOptimizationPipeline).
Adjust when the pass is run so that the .llvm.call-graph-profile
section is produced correctly for FullLTO.
Fixes#56185 (https://github.com/llvm/llvm-project/issues/56185)
AST does not have special nodes for pragmas. Instead a pragma modifies
some state variables of Sema, which in turn results in modified
attributes of AST nodes. This technique applies to floating point
operations as well. Every AST node that can depend on FP options keeps
current set of them.
This technique works well for options like exception behavior or fast
math options. They represent instructions to the compiler how to modify
code generation for the affected nodes. However treatment of FP control
modes has problems with this technique. Modifying FP control mode
(like rounding direction) usually requires operations on hardware, like
writing to control registers. It must be done prior to the first
operation that depends on the control mode. In particular, such
operations are required for implementation of `pragma STDC FENV_ROUND`,
compiler should set up necessary rounding direction at the beginning of
compound statement where the pragma occurs. As there is no representation
for pragmas in AST, the code generation becomes a complicated task in
this case.
To solve this issue FP options are kept inside CompoundStmt. Unlike to FP
options in expressions, these does not affect any operation on FP values,
but only inform the codegen about the FP options that act in the body of
the statement. As all pragmas that modify FP environment may occurs only
at the start of compound statement or at global level, such solution
works for all relevant pragmas. The options are kept as a difference
from the options in the enclosing compound statement or default options,
it helps codegen to set only changed control modes.
Differential Revision: https://reviews.llvm.org/D123952
In preparation for the removal in D128719, this stops creating
insertvalue constant expressions (well, unless they are directly
used in LLVM IR).
Differential Revision: https://reviews.llvm.org/D128792
We'll need to add more cases for Objective-C entities and adding
everything to `err_module_odr_violation_mismatch_decl_diff` makes it
harder to work with over time.
Differential Revision: https://reviews.llvm.org/D128488
Display 'static_assert failed: message' instead of
'static_assert failed "message"' to be consistent
with other implementations and be slightly more
readable.
Reviewed By: #libc, aaron.ballman, philnik, Mordante
Differential Revision: https://reviews.llvm.org/D128844
This is required to support RISC-V where the '+d' target feature
indicates the presence of the D instruction set extension, which
changes to the Hard-float 'd' ABI.
Differential Revision: https://reviews.llvm.org/D128853
This patch gives basic parsing and semantic support for
"parallel masked taskloop" construct introduced in
OpenMP 5.1 (section 2.16.9)
Differential Revision: https://reviews.llvm.org/D128834
This reverts commit 2f20743952 because it
triggers an assertion when building an LLDB test program:
Assertion failed: (InstantiatingSpecializations.empty() && "failed to
clean up an InstantiatingTemplate?"), function ~Sema, file
/Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/clang/lib/Sema/Sema.cpp,
line 458.
More details in https://reviews.llvm.org/D126907.
Create an interface for writing SARIF documents from within clang:
The primary intent of this change is to introduce the interface
clang::SarifDocumentWriter, which allows incrementally adding
diagnostic data to a JSON backed document. The proposed interface is
not yet connected to the compiler internals, which will be covered in
future work. As such this change will not change the input/output
interface of clang.
This change also introduces the clang::FullSourceRange type that is
modeled after clang::SourceRange + clang::FullSourceLoc, this is useful
for packaging a pair of clang::SourceLocation objects with their
corresponding SourceManagers.
Previous discussions:
RFC for this change: https://lists.llvm.org/pipermail/cfe-dev/2021-March/067907.htmlhttps://lists.llvm.org/pipermail/cfe-dev/2021-July/068480.html
SARIF Standard (2.1.0):
https://docs.oasis-open.org/sarif/sarif/v2.1.0/os/sarif-v2.1.0-os.html
Differential Revision: https://reviews.llvm.org/D109701
Kazu Hirata