trunc (sign_ext_inreg X, iM) to iN --> sign_ext_inreg (trunc X to iN), iM
There are improvements on existing tests from this, and there are a pair
of large regressions in D127115 for Thumb2 caused by not folding this
pattern.
Differential Revision: https://reviews.llvm.org/D129890
D127595 added the ability to recurse up a (one-use) INSERT_VECTOR_ELT chain to create a BUILD_VECTOR before other combines manage to break the chain, something that is particularly bad in D127115.
The patch generalises this so it doesn't have to build the chain starting from the last element insertion, instead it can now start from any insertion and will recurse up the chain until it finds all elements or finds a UNDEF/BUILD_VECTOR/SCALAR_TO_VECTOR which represents that start of the chain.
Fixes several regressions in D127115
As mentioned on D127115, this patch that attempts to recognise shuffle masks that could be simplified to a AND mask - we already have a similar transform that will fold AND -> 'clear mask' shuffle, but this patch handles cases where the referenced elements are not from the same lane indices but are known to be zero.
Differential Revision: https://reviews.llvm.org/D129150
combineShiftAnd1ToBitTest already matches "and (not (srl X, C)), 1 --> (and X, 1<<C) == 0" patterns, but we can end up with situations where the not is before the shift.
Part of some yak shaving for D127115 to generalise the "xor (X >> ShiftC), XorC --> (not X) >> ShiftC" fold.
SimplifyDemandedBits is called slightly later which allows the not(sext(x)) -> sext(not(x)) fold to occur via foldLogicOfShifts
As mentioned on D127115, we should be able to further generalise this based off the demanded bits.
This is similar to D125680, but for llvm.experimental.patchpoint
(instead of llvm.experimental.stackmap).
Differential review: https://reviews.llvm.org/D129268
Following some recent discussions, this changes the representation
of callbrs in IR. The current blockaddress arguments are replaced
with `!` label constraints that refer directly to callbr indirect
destinations:
; Before:
%res = callbr i8* asm "", "=r,r,i"(i8* %x, i8* blockaddress(@test8, %foo))
to label %asm.fallthrough [label %foo]
; After:
%res = callbr i8* asm "", "=r,r,!i"(i8* %x)
to label %asm.fallthrough [label %foo]
The benefit of this is that we can easily update the successors of
a callbr, without having to worry about also updating blockaddress
references. This should allow us to remove some limitations:
* Allow unrolling/peeling/rotation of callbr, or any other
clone-based optimizations
(https://github.com/llvm/llvm-project/issues/41834)
* Allow duplicate successors
(https://github.com/llvm/llvm-project/issues/45248)
This is just the IR representation change though, I will follow up
with patches to remove limtations in various transformation passes
that are no longer needed.
Differential Revision: https://reviews.llvm.org/D129288
If we have a variable shift amount and the demanded mask has leading
zeros, we can propagate those leading zeros to not demand those bits
from operand 0. This can allow zero_extend/sign_extend to become
any_extend. This pattern can occur due to C integer promotion rules.
This transform is already done by InstCombineSimplifyDemanded.cpp where
sign_extend can be turned into zero_extend for example.
Reviewed By: spatel, foad
Differential Revision: https://reviews.llvm.org/D121833
When doing scalable vectorization, the loop vectorizer uses a urem in the computation of the vector trip count. The RHS of that urem is a (possibly shifted) call to @llvm.vscale.
vscale is effectively the number of "blocks" in the vector register. (That is, types such as <vscale x 8 x i8> and <vscale x 1 x i8> both fill one 64 bit block, and vscale is essentially how many of those blocks there are in a single vector register at runtime.)
We know from the RISCV V extension specification that VLEN must be a power of two between ELEN and 2^16. Since our block size is 64 bits, the must be a power of two numbers of blocks. (For everything other than VLEN<=32, but that's already broken.)
It is worth noting that AArch64 SVE specification explicitly allows non-power-of-two sizes for the vector registers and thus can't claim that vscale is a power of two by this logic.
Differential Revision: https://reviews.llvm.org/D129609
We have the same fold in InstCombine - though implemented via OrZero flag on isKnownToBePowerOfTwo. The reasoning here is that either a) the result of the lshr is a power-of-two, or b) we have a div-by-zero triggering UB which we can ignore.
Differential Revision: https://reviews.llvm.org/D129606
To convert CTLZ to popcount we do
x = x | (x >> 1);
x = x | (x >> 2);
...
x = x | (x >>16);
x = x | (x >>32); // for 64-bit input
return popcount(~x);
This smears the most significant set bit across all of the bits
below it then inverts the remaining 0s and does a population count.
To support non-power of 2 types, the last shift amount must be
more than half of the size of the type. For i15, the last shift
was previously a shift by 4, with this patch we add another shift
of 8.
Fixes PR56457.
Differential Revision: https://reviews.llvm.org/D129431
Noticed while investigating the SystemZ regressions in D77804, prefer handling the knownbits analysis/simplification in the bitop nodes directly before falling back to SimplifyMultipleUseDemandedBits
visitInlineAsm() in SDAGBuilder was duplicating a lot of the code
in ParseConstraints(), in particular all the logic to determine the
operand value and constraint VT.
Rely on the data computed by ParseConstraints() instead, and update
its ConstraintVT implementation to match getCallOperandValEVT()
more precisely.
As far as I can tell what was happening in the original code is
that the getNode call receives the same operands as the original
node with different SDNodeFlags. The logic inside getNode detects
that the node already exists and intersects the flags into the
existing node and returns it. This results in Op and NewOp for the
TLO.CombineTo call always being the same node.
We may have already called CombineTo as part of the recursive handling.
A second call to CombineTo as we unwind the recursion overwrites
the previous CombineTo. I think this means any time we updated the
poison flags that was the only change that ends up getting made
and we relied on DAGCombiner to revisit and call SimplifyDemandedBits
again. The second time the poison flags wouldn't need to be dropped
and we would keep the CombineTo call from further down the recursion.
We can instead call setFlags to drop the poison flags and remove the
call to TLO.CombineTo. This way we keep the CombineTo from deeper in
the recursion which should be more efficient.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D129511
As suggested in the post-commit feedback for D128123,
we can ease the mask constraint to ignore the MSB
(and make the code easier to read by adjusting the check).
https://alive2.llvm.org/ce/z/bbvqWv
This patch restores calls to has_value to make it clear that we are
checking the presence of an optional value, not the underlying value.
This patch partially reverts d08f34b592.
Differential Revision: https://reviews.llvm.org/D129454
(Reapply after revert in e9ce1a5880 due to
Fuchsia test failures. Removed changes in lib/ExecutionEngine/ other
than error categories, to be checked in more detail and reapplied
separately.)
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
We already handled this case for add with a constant RHS. A
similar pattern can occur for sub with a constant left hand side.
Test cases use add and a mul representing (neg (shl X, C)) because
that's what I saw in the wild. The mul will be decomposed and then
the new transform can kick in.
Tests have not been committed, but this patch shows the changes.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D128769
If all the demanded bits of the AND mask covering the inserted subvector 'X' are known to be one, then the mask isn't affecting the subvector at all.
In which case, if the base vector 'C' is undef/constant, then move the AND mask up to just (constant) fold it directly.
Addresses some of the regressions from D129150, particularly the cases where we're attempting to zero the upper elements of a widened vector.
Differential Revision: https://reviews.llvm.org/D129290
This is almost the same as the abandoned D48529, but it
allows splat vector constants too.
This replaces the x86-specific code that was added with
the alternate patch D48557 with the original generic
combine.
This transform is a less restricted form of an existing
InstCombine and the proposed SDAG equivalent for that
in D128080:
https://alive2.llvm.org/ce/z/OUm6N_
Differential Revision: https://reviews.llvm.org/D128123
This is done during type legalization since the target representation of
these nodes may not be valid until after type legalization, and after
type legalization the fact that these are dealing with i1 types may be
lost.
Differential Revision: https://reviews.llvm.org/D128996
Truncates and compares require some changes to generic legalisation functions
to use ElementCount instead of getNumElements.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D129082
Prior to this change, live variable operands passed to
`llvm.experimental.stackmap` would be emitted directly to target nodes,
meaning that they don't get legalised. The upshot of this is that LLVM
may crash when encountering illegally typed target nodes.
e.g. https://github.com/llvm/llvm-project/issues/21657
This change introduces a platform independent stackmap DAG node whose
operands are legalised as per usual, thus avoiding aforementioned
crashes.
Note that some kinds of argument are still not handled properly, namely
vectors, structs, and large integers, like i128s. These will need to be
addressed in follow-up changes.
Note also that this does not change the behaviour of
`llvm.experimental.patchpoint`. A follow up change will do the same for
this intrinsic.
Differential review:
https://reviews.llvm.org/D125680
This patch adds the support for `fmax` and `fmin` operations in `atomicrmw`
instruction. For now (at least in this patch), the instruction will be expanded
to CAS loop. There are already a couple of targets supporting the feature. I'll
create another patch(es) to enable them accordingly.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D127041
As integer div/rem constant expressions are no longer supported,
constants can no longer trap and are always safe to speculate.
Remove the Constant::canTrap() method and its usages.
This removes the insertvalue constant expression, as part of
https://discourse.llvm.org/t/rfc-remove-most-constant-expressions/63179.
This is very similar to the extractvalue removal from D125795.
insertvalue is also not supported in bitcode, so no auto-ugprade
is necessary.
ConstantExpr::getInsertValue() can be replaced with
IRBuilder::CreateInsertValue() or ConstantFoldInsertValueInstruction(),
depending on whether a constant result is required (with the latter
being fallible).
The ConstantExpr::hasIndices() and ConstantExpr::getIndices()
methods also go away here, because there are no longer any constant
expressions with indices.
Differential Revision: https://reviews.llvm.org/D128719
One motivation to add support for these types are the LD1Q/ST1Q
instructions in SME, for which we have defined a number of load/store
intrinsics which at the moment still take a `<vscale x 16 x i1>` predicate
regardless of their element type.
This patch adds basic support for the nxv1i1 type such that it can be passed/returned
from functions, as well as some basic support to support some existing tests that
result in a nxv1i1 type. It also adds support for splats.
Other operations (e.g. insert/extract subvector, logical ops, etc) will be
supported in follow-up patches.
Reviewed By: paulwalker-arm, efriedma
Differential Revision: https://reviews.llvm.org/D128665
`commonAlignment` is a shortcut to pick the smallest of two `Align`
objects. As-is it doesn't bring much value compared to `std::min`.
Differential Revision: https://reviews.llvm.org/D128345
These intrinsics are now fundemental for SVE code generation and have been
present for a year and a half, hence move them out of the experimental
namespace.
Differential Revision: https://reviews.llvm.org/D127976
Patch was reverted in 4c5f10a due to buildbot failures, now being
reapplied with updated AArch64 and RISCV tests.
This patch adds handling for the llvm.powi.* intrinsics in
BasicTTIImplBase::getIntrinsicInstrCost() and improves vectorization.
Closes#53887.
Differential Revision: https://reviews.llvm.org/D128172
According to the vector spec, mf8 is not supported for i8 if ELEN
is 32. Similarily mf4 is not suported for i16/f16 or mf2 for i32/f32.
Since RVVBitsPerBlock is 64 and LMUL is calculated as
((MinNumElements * ElementSize) / RVVBitsPerBlock) this means we
need to disable any type with MinNumElements==1.
For generic IR, these types will now be widened in type legalization.
For RVV intrinsics, we'll probably hit a fatal error somewhere. I plan
to work on disabling the intrinsics in the riscv_vector.h header.
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D128286
We're slowly removing SelectionDAG::GetDemandedBits and replacing it with SimplifyMultipleUseDemandedBits, we no longer have any uses for the vector demanded elt variant.
This patch adds handling for the llvm.powi.* intrinsics in
BasicTTIImplBase::getIntrinsicInstrCost() and improves vectorization.
Closes#53887.
Differential Revision: https://reviews.llvm.org/D128172
An AArch64ISD::DUP is just a splat, where the known bits for each lane
are the same as the input. This teaches that to computeKnownBitsForTargetNode.
Problems arise for constants though, as a constant BUILD_VECTOR can be
lowered to an AArch64ISD::DUP, which SimplifyDemandedBits would then
turn back into a constant BUILD_VECTOR leading to an infinite cycle.
This has been prevented by adding a isTargetCanonicalConstantNode node
to prevent the conversion back into a BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D128144
Similar to the existing (shl (srl x, c1), c2) fold
Part of the work to fix the regressions in D77804
Differential Revision: https://reviews.llvm.org/D125836
The VT we want to shrink to may not be legal especially after type
legalization.
Fixes PR56110.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D128135
WidenVecOp_INSERT_SUBVECTOR only supported cases where widening
effectively converts the insert into a copy. However, when the
widened subvector is no bigger than the vector being inserted into
and we can be sure there's no loss of data, we can simply emit
another INSERT_SUBVECTOR.
Fixes: #54982
Differential Revision: https://reviews.llvm.org/D127508
MinRCSize is 4 and prevents constrainRegClass from changing the
register class if the new class has size less than 4.
IMPLICIT_DEF gets a unique vreg for each use and will be removed
by the ProcessImplicitDef pass before register allocation. I don't
think there is any reason to prevent constraining the virtual register
to whatever register class the use needs.
The attached test case was previously creating a copy of IMPLICIT_DEF
because vrm8nov0 has 3 registers in it.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D128005
This helps handling a case where the BUILD_VECTOR has i16 element type
and i32 constant operands
t2: v8i16 = setcc t8, t17, setult:ch
t3: v8i16 = BUILD_VECTOR Constant:i32<1>, ...
t4: v8i16 = and t2, t3
t5: v8i16 = add t8, t4
This can be turned into t5: v8i16 = sub t8, t2, and allows us to remove
t3 and t4 from the DAG.
Differential Revision: https://reviews.llvm.org/D127354
This is modeled after the half-precision fp support. Two new nodes are
introduced for casting from and to bf16. Since casting from bf16 is a
simple operation I opted to always directly lower it to integer
arithmetic. The other way round is more complicated if you want to
preserve IEEE semantics, so it's handled by a new __truncsfbf2
compiler-rt builtin.
This is of course very bare bones, but sufficient to get a semi-softened
fadd on x86.
Possible future improvements:
- Targets with bf16 conversion instructions can now make fp_to_bf16 legal
- The software conversion to bf16 can be replaced by a trivial
implementation under fast math.
Differential Revision: https://reviews.llvm.org/D126953
Another issue unearthed by D127115
We take a long time to canonicalize an insert_vector_elt chain before being able to convert it into a build_vector - even if they are already in ascending insertion order, we fold the nodes one at a time into the build_vector 'seed', leaving plenty of time for other folds to alter it (in particular recognising when they come from extract_vector_elt resulting in a shuffle_vector that is much harder to fold with).
D127115 makes this particularly difficult as we're almost guaranteed to have the lost the sequence before all possible insertions have been folded.
This patch proposes to begin at the last insertion and attempt to collect all the (oneuse) insertions right away and create the build_vector before its too late.
Differential Revision: https://reviews.llvm.org/D127595
This patch allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits in cases where the source operand has other uses, enabling us to peek through the shifted value if we don't demand all the bits/elts.
This helps with several of the regressions from D125836
In the same spirit as D73543 and in reply to https://reviews.llvm.org/D126768#3549920 this patch is adding support for `__builtin_memset_inline`.
The idea is to get support from the compiler to easily write efficient memory function implementations.
This patch could be split in two:
- one for the LLVM part adding the `llvm.memset.inline.*` intrinsics.
- and another one for the Clang part providing the instrinsic as a builtin.
Differential Revision: https://reviews.llvm.org/D126903
This should fix a number of shuffle regressions in D127115 where the re-ordered combines mean we fail to fold a EXTRACT_VECTOR_ELT/INSERT_VECTOR_ELT sequence into a BUILD_VECTOR if we extract from more than one vector source.
This matches what we do in IR. For the RISC-V test case, this allows
us to use -8 for the AND mask instead of materializing a constant in a register.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D127335
During lowering of memcmp/bcmp, the check for a size of 0 is done
in 2 different ways. In rare cases this can lead to a crash in
SystemZSelectionDAGInfo::EmitTargetCodeForMemcmp(). The root cause
is that SelectionDAGBuilder::visitMemCmpBCmpCall() checks for a
constant int value which is not yet evaluated. When the value is
turned into a SDValue, then the evaluation is done and results in
a ConstantSDNode. But EmitTargetCodeForMemcmp() expects the special
case of 0 length to be handled, which results in an assertion.
The fix is to turn the value into a SDValue, so that both functions
use the same check.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D126900
Extend the TypeWidenVector case of PromoteIntRes_BITCAST to work
with TypeSize directly rather than silently casting to unsigned.
To accomplish this I've extended TypeSize with an interface that
essentially allows TypeSize division when both operands have the
same number of dimensions.
There still exists combinations of scalable vector bitcasts that
cause compiler crashes. I call these out by adding "is missing"
entries to sve-bitcast.
Depends on D126957.
Fixes: #55114
Differential Revision: https://reviews.llvm.org/D127126
Bitcasting between unpacked scalable vector types of different
element counts is not a NOP because the live elements are laid out
differently.
01234567
e.g. nxv2i32 = XX??XX??
nxv4f16 = X?X?X?X?
Differential Revision: https://reviews.llvm.org/D126957
As noticed on D127115 - we were missing this fold, instead just having the shuffle(shuffle(x,undef,splatmask),undef) fold. We should be able to merge these into one using SelectionDAG::isSplatValue, but we'll need to match the shuffle's undef handling first.
This also exposed an issue in SelectionDAG::isSplatValue which was incorrectly propagating the undef mask across a bitcast (it was trying to just bail with a APInt::isSubsetOf if it found any undefs but that was actually the wrong way around so didn't fire for partial undef cases).
I can't remove the function just yet as it is used in the generated .inc files.
I would also like to provide a way to compare alignment with TypeSize since it came up a few times.
Differential Revision: https://reviews.llvm.org/D126910
These assert that there are no "useless" assertzext/assertsext nodes
(that assert a wider width than a following trunc), but I don't think
there is anything preventing such nodes from reaching this code.
I don't think the assertion is relevant for correctness of this
transform either -- if such an assert is present, then the other
one will always be to a smaller width, and we'll pick that one.
The assertion dates back to D37017.
Fixes https://github.com/llvm/llvm-project/issues/55846.
Differential Revision: https://reviews.llvm.org/D126952
Move the code that was added for D126896 after the normal recursive calls
to computeKnownBits. This allows us to calculate trailing zeros.
Previously we would break out of the switch before the recursive calls.
Some cl::ZeroOrMore were added to avoid the `may only occur zero or one times!`
error. More were added due to cargo cult. Since the error has been removed,
cl::ZeroOrMore is unneeded.
Also remove cl::init(false) while touching the lines.
When promoting a shift, make sure we only fetch the second operand
after promoting the first. Load promotion may replace users of the
old load, and we don't want to be left with a dangling reference to
the old load instruction.
The crashing test case is from https://reviews.llvm.org/D126689#3553212.
Differential Revision: https://reviews.llvm.org/D126886
If C is non-negative, the result of the smax must also be
non-negative, so all sign bits of the result are 0.
This allows DAGCombiner to remove a zext_inreg in the modified test.
This zext_inreg started as a sext that became zext before type
legalization then was promoted to a zext_inreg.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D126896
With a fix for an expensive checks build failure exposed by new RISC-V tests.
Something about expanding two rotates in type legalization caused a change
in the remapping tables that the expensive checks verifying wasn't expecting.
See comment in the code for how it was fixed.
Tests came from this commit that exposed the bug
[RISCV] Add test cases showing failure to remove mask on rotate amounts.
If the masking AND has multiple users we fail to remove it.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D126036
The second argument to is_fp_class specifies the set of floating-point
class to test against. It can be zero, in this case the intrinsic is
expected to return zero value.
Differential Revision: https://reviews.llvm.org/D112025
Followup to D125988 - FPOW is similar to FREM and will most likely scalarize to libcalls, so unroll before widening to prevent use making additional libcalls with UNDEF args.
Currently, two element vectors produced as the result of a binary op are
widened to four element vectors on x86 by
DAGTypeLegalizer::WidenVecRes_BinaryCanTrap. If the op still isn't legal
after widening it is unrolled into 4 scalar ops in SelectionDAG before
being converted into a libcall. This way we end up with 4 libcalls (two of
them on known undef elements) instead of the original two libcalls.
This patch modifies DAGTypeLegalizer::WidenVectorResult to ensure that if
it is known that a binary op will be tunred into a libcall, it is unrolled
instead of being widened. This prevents the creation of the extra scalar
instructions on known undef elements and (eventually) libacalls with known
undef parameters which would otherwise be created when the op gets expanded
post widening.
Differential Revision: https://reviews.llvm.org/D125988
If the VT is i2, then 2 is really -2.
Test has not been commited yet, but diff shows the change.
Fixes PR55644.
Differential Revision: https://reviews.llvm.org/D126213
I had initially assumed this was the problem with
https://github.com/llvm/llvm-project/issues/55271#issuecomment-1133426243
But it turns out that was a simpler issue. This patch is still
more correct than what we were doing before so figured I'd submit
it anyway.
No test case because I'm not sure how to get an undef around
until expansion.
Looking at the test deltas I wonder if it be valid to combine
(sext_inreg (freeze (aextload X))) -> (freeze (sextload X)).
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D126175
abs should only produce a positive value or the signed minimum
value. This means we can't fold abs(undef) to undef as that would
allow more values. Fold to 0 instead to match InstSimplify.
Fixes test mentioned in comment on pr55271.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D126174
Most clients only used these methods because they wanted to be able to
extend or truncate to the same bit width (which is a no-op). Now that
the standard zext, sext and trunc allow this, there is no reason to use
the OrSelf versions.
The OrSelf versions additionally have the strange behaviour of allowing
extending to a *smaller* width, or truncating to a *larger* width, which
are also treated as no-ops. A small amount of client code relied on this
(ConstantRange::castOp and MicrosoftCXXNameMangler::mangleNumber) and
needed rewriting.
Differential Revision: https://reviews.llvm.org/D125557
This function tries to match (a >> 8) | (a << 8) as (bswap a) >> 16.
If the SRL isn't masked and the high bits aren't demanded, we still
need to ensure that bits 23:16 are zero. After the right shift they
will be in bits 15:8 which is where the important bits from the SHL
end up. It's only a bswap if the OR on bits 15:8 only takes the bits
from the SHL.
Fixes PR55484.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D125641
Sanjay Patel