Description: This change enables the compare operations to be selected to SALU/VALU form
dependent of the SDNode divergence flag.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D106079
It looked more reasonable to set the wait state to
zero for all non-instructions. With that we can avoid
the special handling for them in `getWaitStatesSince`
and `AdvanceCycle`. This NFC patch makes the handling
more generic.
Instructions like WAVE_BARRIER and SI_MASKED_UNREACHABLE
are only placeholders to prevent certain unwanted
transformations and will get discarded during assembly
emission. They should not be counted during nop insertion.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D108022
Allow MIMG instructions to be selected with 6/7 VGPRs for vaddr.
Previously these were rounded up to VReg_256 this saves VGPRs.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103800
Any def of EXEC prevents rematerialization of any VOP instruction
because of the physreg use. Create a callback to check if the
physreg use can be ingored to allow rematerialization.
Differential Revision: https://reviews.llvm.org/D105836
This is a pilot change to verify the logic. The rest will be
done in a same way, at least the rest of VOP1.
Differential Revision: https://reviews.llvm.org/D105742
This is to allow 64 bit constant rematerialization. If a constant
is split into two separate moves initializing sub0 and sub1 like
now RA cannot rematerizalize a 64 bit register.
This gives 10-20% uplift in a set of huge apps heavily using double
precession math.
Fixes: SWDEV-292645
Differential Revision: https://reviews.llvm.org/D104874
Add SReg_224, VReg_224, AReg_224, etc.
Link 224-bit types with v7i32/v7f32.
Link existing 192-bit types to newly added v3i64/v3f64/v6i32/v6f32.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D104622
Avoid having to round up to v8f32/VReg_256 when only 5 VGPRs are
required for a MIMG address operand.
Maintain _V8 instruction variants of pseudo instructions allowing
assembly prior to GFX10 to work as-is. Currently the validator
can tell for GFX10 what the correct size is, so will disallow
oversize address registers.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D103672
The FixSGPRCopies pass converts instructions to VALU when
removing illegal VGPR to SGPR copies. Instructions that use SCC
are changed to use VCC instead. When that happens, the pass must
also change instructions that define SCC to define VCC.
The pass was not changing the SCC definition when an ADDC is
converted due to a input that is a VGPR to SGPR copy. But, the
initial ADD insruction, which define SCC, is not converted.
This causes a compilation failure due to a use of an undefined
physical register.
This patch adds code that inserts the SCC definition in the
MoveToVALU worklist when a SCC use is converted to a VCC use.
Differential Revision: https://reviews.llvm.org/D102111
moveOperands does not handle moving tied operands since it would
generally have to fixup the tied operand references. Avoid the assert
by untying and retying after the modification. These in place
modifications really aren't managable.
A consequence is that checkInstOffsetsDoNotOverlap can now distinguish
sp+offset from fp+offset, so it knows that it shouldn't try to work out
whether the accesses overlap just by comparing the offsets. For example
in these two instructions:
MIR:
BUFFER_STORE_DWORD_OFFSET %0:vgpr_32(s32), $sgpr0_sgpr1_sgpr2_sgpr3, $sgpr32, 4, 0, 0, 0, 0, 0, implicit $exec :: (dereferenceable store 4 into stack + 4, addrspace 5)
%4:vgpr_32 = BUFFER_LOAD_DWORD_OFFEN %stack.0.alloca, $sgpr0_sgpr1_sgpr2_sgpr3, $sgpr32, 0, 0, 0, 0, 0, 0, implicit $exec :: (load 4 from `i8 addrspace(5)* undef`, addrspace 5)
ISA:
buffer_store_dword v0, off, s[0:3], s32 offset:4
buffer_load_dword v0, off, s[0:3], s34
Differential Revision: https://reviews.llvm.org/D73957
A16 support for image instructions assembly/disassembly (gfx10) was missing
Also refactor MIMG op addr size calcs to common function
We'd got 3 places where the same operation was being done.
One test is now marked XFAIL until a related codegen patch is in place
Differential Revision: https://reviews.llvm.org/D102231
Change-Id: I7e86e730ef8c71901457855cba570581f4f576bb
gfx9 does not work with negative offsets, gfx10 works only with
aligned negative offsets, but not with unaligned negative offsets.
This is slightly more conservative than needed, gfx9 does support
negative offsets when a VGPR address is used and gfx10 supports
negative, unaligned offsets when an SGPR address is used, but we
do not make use of that with this patch.
Differential Revision: https://reviews.llvm.org/D101292
Extend the legalization of global SADDR loads and stores
with changing to VADDR to the FLAT scratch instructions.
Differential Revision: https://reviews.llvm.org/D101408
Instead of legalizing saddr operand with a readfirstlane
when address is moved from SGPR to VGPR we can just
change the opcode.
Differential Revision: https://reviews.llvm.org/D101405
In GFX10 VOP3 can have a literal, which opens up the possibility of two
operands using the same literal value, which is allowed and only counts
as one use of the constant bus.
AMDGPUAsmParser::validateConstantBusLimitations already knew about this
but SIInstrInfo::verifyInstruction did not.
Differential Revision: https://reviews.llvm.org/D100770
Use SIInstrFlags to differentiate between the different
variants of flat instructions (flat, global and scratch).
This should make it easier to bundle the immediate offset logic in a
single place and implement restrictions and bug workarounds.
Fixed version of D99587, which does not rely on the address space.
Differential Revision: https://reviews.llvm.org/D99743
RA can insert something like a sub1_sub2 COPY of a wide VGPR
tuple which results in the unaligned acces with v_pk_mov_b32
after the copy is expanded. This is regression after D97316.
Differential Revision: https://reviews.llvm.org/D98549
Replace individual operands GLC, SLC, and DLC with a single cache_policy
bitmask operand. This will reduce the number of operands in MIR and I hope
the amount of code. These operands are mostly 0 anyway.
Additional advantage that parser will accept these flags in any order unlike
now.
Differential Revision: https://reviews.llvm.org/D96469
D57708 changed SIInstrInfo::isReallyTriviallyReMaterializable to reject
V_MOVs with extra implicit operands, but it accidentally rejected all
V_MOVs because of their implicit use of exec. Fix it but avoid adding a
moderately expensive call to MI.getDesc().getNumImplicitUses().
In real graphics shaders this changes quite a few vgpr copies into move-
immediates, which is good for avoiding stalls on GFX10.
Differential Revision: https://reviews.llvm.org/D98347
This is already deprecated, so remove code working on this.
Also update the tests by using S_CBRANCH_EXECZ instead of SI_MASK_BRANCH.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D97545
* Add amdgcn_strict_wqm intrinsic.
* Add a corresponding STRICT_WQM machine instruction.
* The semantic is similar to amdgcn_strict_wwm with a notable difference that not all threads will be forcibly enabled during the computations of the intrinsic's argument, but only all threads in quads that have at least one thread active.
* The difference between amdgc_wqm and amdgcn_strict_wqm, is that in the strict mode an inactive lane will always be enabled irrespective of control flow decisions.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96258
* Introduce the new intrinsic amdgcn_strict_wwm
* Deprecate the old intrinsic amdgcn_wwm
The change is done for consistency as the "strict"
prefix will become an important, distinguishing factor
between amdgcn_wqm and amdgcn_strictwqm in the future.
The "strict" prefix indicates that inactive lanes do not
take part in control flow, specifically an inactive lane
enabled by a strict mode will always be enabled irrespective
of control flow decisions.
The amdgcn_wwm will be removed, but doing so in two steps
gives users time to switch to the new name at their own pace.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96257
gfx90a operations require even aligned registers, but this was
previously achieved by reserving registers inside the full class.
Ideally this would be captured in the static instruction definitions
for the operands, and we would have different instructions per
subtarget. The hackiest part of this is we need to manually reassign
AGPR register classes after instruction selection (we get away without
this for VGPRs since those types are actually registered for legal
types).
* Update skip-if-dead.ll with tests for wave32.
* Fix the crash in verifier in one newly enabled test by adding
missing fixImplicitOperands in branch insertion code.
```
*** Bad machine code: Using an undefined physical register ***
- function: test_kill_divergent_loop
- basic block: %bb.2 bb (0xad96308)
- instruction: S_CBRANCH_VCCNZ %bb.1, implicit $vcc_lo
- operand 1: implicit $vcc_lo
LLVM ERROR: Found 1 machine code errors.
```
* Simplify "cbranch_kill" to not use interp instructions.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D96793
Move implementation of kill intrinsics to WQM pass. Add live lane
tracking by updating a stored exec mask when lanes are killed.
Use live lane tracking to enable early termination of shader
at any point in control flow.
Reviewed By: piotr
Differential Revision: https://reviews.llvm.org/D94746
V_SET_INACTIVE is implemented with S_NOT which clobbers SCC.
Mark sure it is marked appropriately.
Reviewed By: piotr
Differential Revision: https://reviews.llvm.org/D95509
Previously, instructions which could be
expressed as VOP3 in addition to another
encoding had a _e64 suffix on the tablegen
record name, while those
only available as VOP3 did not. With this
patch, all VOP3s will have the _e64 suffix.
The assembly does not change, only the mir.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D94341
Change-Id: Ia8ec8890d47f8f94bbbdac43745b4e9dd2b03423
In ST mode, flat scratch instructions have neither an sgpr nor a vgpr
for the address. This lead to an assertion when inserting hard clauses.
Differential Revision: https://reviews.llvm.org/D94406
It is possible for copies or spills to be inserted in the middle of indirect
addressing sequences which use VGPR indexing. Spills to accvgprs could be
effected by the indexing mode.
Add new pseudo instructions that are expanded after register allocation to avoid
the problematic spill or copy placement.
Differential Revision: https://reviews.llvm.org/D91048
Add a calling convention called amdgpu_gfx for real function calls
within graphics shaders. For the moment, this uses the same calling
convention as other calls in amdgpu, with registers excluded for return
address, stack pointer and stack buffer descriptor.
Differential Revision: https://reviews.llvm.org/D88540
The insertion of waterfall loops splits the current basic block into
three blocks. So the basic block that we iterate over must be updated.
This failed assert(!NodePtr->isKnownSentinel()) in ilist_iterator for
divergent calls in branches before.
Differential Revision: https://reviews.llvm.org/D90596
This reverts r227987 "R600/SI: Determine target-specific encoding of READLANE and WRITELANE early v2".
All the codegen changes are caused by the post-RA scheduler no longer
treating readlane/writelane as scheduling barriers due to having
unmodelled side effects. (The pseudos are hasSideEffects = 0, but the
real instructions are hasSideEffects = ? which TableGen conservatively
treats as 1.)
Differential Revision: https://reviews.llvm.org/D90401
V_DIV_SCALE_F32/F64 are VOP3B encoded so they can't use the ABS src
modifier, but they can still use NEG and the usual output modifiers.
This partially reverts 3b99f12a4e "AMDGPU: Remove modifiers from v_div_scale_*".
Differential Revision: https://reviews.llvm.org/D90296
This does not change anything at the moment, but needed for
D89170. In that change I am probing a physical SGPR to see if
it is legal. RC is SReg_32, but DRC for scratch instructions
is SReg_32_XEXEC_HI and test fails.
That is sufficient just to check if DRC contains a register
here in case of physreg. Physregs also do not use subregs
so the subreg handling below is irrelevant for these.
Differential Revision: https://reviews.llvm.org/D90064
I was wrong in thinking that MRI.use_instructions return unique instructions and mislead Jay in his previous patch D64393.
First loop counted more instructions than it was in reality and the second loop went beyond the basic block with that counter.
I used Jay's previous code that relied on MRI.use_operands to constrain the number of instructions to check among.
modifiesRegister is inlined to reduce the number of passes over instruction operands and added assert on BB end boundary.
Differential Revision: https://reviews.llvm.org/D89386
If a target can encode multiple wait-states into a noop allow emitting such
instructions directly.
Reviewed By: rampitec, dmgreen
Differential Revision: https://reviews.llvm.org/D89753
This would end up killing part of the result super-register, resulting
in a verifier error on a later use of the overlapping registers. We
could add kills of any non-aliasing registers, but we should be moving
away from relying on kill flags.
Generate the minimal set of s_mov instructions required when
expanding a SGPR copy operation in copyPhysReg.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D89187
This can fix an asan failure like below.
==15856==ERROR: AddressSanitizer: use-after-poison on address ...
READ of size 8 at 0x6210001a3cb0 thread T0
#0 llvm::MachineInstr::getParent()
#1 llvm::LiveVariables::VarInfo::findKill()
#2 TwoAddressInstructionPass::rescheduleMIBelowKill()
#3 TwoAddressInstructionPass::tryInstructionTransform()
#4 TwoAddressInstructionPass::runOnMachineFunction()
We need to update the Kills if we replace instructions. The Kills
may be later accessed within TwoAddressInstruction pass.
Differential Revision: https://reviews.llvm.org/D89092
Extend loadSRsrcFromVGPR to allow moving a range of instructions into
the loop. The call instruction is surrounded by copies into physical
registers which should be part of the waterfall loop.
Differential Revision: https://reviews.llvm.org/D88291
Fix the verifier so that overlapping SGPR operands are counted
independently. We cannot assume that overlapping SGPR accesses
only count as a single constant bus use.
The exception is implicit uses which do not add to constant bus
usage (only) when overlapping.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D87748
Since 6524a7a2b9, this would sometimes
not emit the or to exec at the beginning of the block, where it really
has to be. If there is an instruction that defines one of the source
operands, split the block and turn the si_end_cf into a terminator.
This avoids regressions when regalloc fast is switched to inserting
reloads at the beginning of the block, instead of spills at the end of
the block.
In a future change, this should always split the block.
Pre-gfx10 all MODE-setting instructions were S_SETREG_B32 which is
marked as having unmodeled side effects, which makes the machine
scheduler treat it as a barrier. Now that we have proper implicit $mode
operands we can use a no-side-effects S_SETREG_B32_mode pseudo instead
for setregs that only touch the FP MODE bits, to give the scheduler more
freedom.
Differential Revision: https://reviews.llvm.org/D87446
- When an operand is changed into an immediate value or like, ensure their
target flags being cleared or set properly.
Differential Revision: https://reviews.llvm.org/D87109
There is no justification for changing vcc_lo to vcc
when shrinking V_CNDMASK, and such a change could
later confuse live variable analysis.
Make sure the original register is preserved.
Differential Revision: https://reviews.llvm.org/D86541
Summary:
When the resource descriptor is of vgpr, we need a waterfall loop
to read into a sgpr. In this patchm we generalized the implementation
to work for any regster class sizes, and extend the work to MIMG
instructions.
Fixes: SWDEV-223405
Reviewers:
arsenm, nhaehnle
Differential Revision:
https://reviews.llvm.org/D82603
The previous implementation was incorrect, and based off incorrect
instruction definitions. Unfortunately we can't match natural
addressing in a lot of cases due to the shift/scale applied in
getelementptrs. This relies on reducing the 64-bit shift to 32-bits.
Fix 64-bit copy to SCC by restricting the pattern resulting
in such a copy to subtargets supporting 64-bit scalar compare,
and mapping the copy to S_CMP_LG_U64.
Before introducing the S_CSELECT pattern with explicit SCC
(0045786f14), there was no need
for handling 64-bit copy to SCC ($scc = COPY sreg_64).
The proposed handling to read only the low bits was however
based on a false premise that it is only one bit that matters,
while in fact the copy source might be a vector of booleans and
all bits need to be considered.
The practical problem of mapping the 64-bit copy to SCC is that
the natural instruction to use (S_CMP_LG_U64) is not available
on old hardware. Fix it by restricting the problematic pattern
to subtargets supporting the instruction (hasScalarCompareEq64).
Differential Revision: https://reviews.llvm.org/D85207
Avoid recursively calling copyPhysReg for AGPR handling. This was
dropping the necessary super register implicit defs to avoid liveness
verifier errors.
Get rid of all fixmes and base heuristic on `num-clustered-dwords`. The main intuition behind this is as
follows. The existing heuristic roughly summarizes as below:
* Assume, all the mem ops instructions participating in the clustering process, loads/stores same num bytes
* If num bytes loaded by each mem op is 4 bytes, then cluster at max 5 mem ops, that is at max 20 bytes
* If num bytes loaded by each mem op is 8 bytes, then cluster at max 3 mem ops, that is at max 24 bytes
* If num bytes loaded by each mem op is 16 bytes, then cluster at max 2 mem ops, that is at max 32 bytes
So, we need to make sure that the new heuristic do not completey deviate away from the above one, and it
properly handles both the sub-word loads and the wide loads.
Reviewed By: arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D84354
Currently GlobalISel doesn't force all VGPR phi operands to VGPRs, so
this hit a case where it was queried with a VGPR and SGPR. This could
arguably be a verifier error, but it's currently not.
This is in preparation for fixing multiple problems with the way AGPR
copies are handled, but this change is NFC itself. First, it's relying
on recursively calling copyPhysReg, which is losing information
necessary to get correct super register handling.
Second, it's constructing a new RegScavenger and doing a O(N^2) walk
on every single sub-spill for every AGPR tuple copy. Third, it's using
the forward form of the scavenger, and not using the preferred
backwards scan.
The hardware has created a real mess in the naming for add/sub, which
have been renamed basically every generation. Switch the carry out
pseudos to have the gfx9/gfx10 names. We were using the original SI/CI
v_add_i32/v_sub_i32 names. Later targets reintroduced these names as
carryless instructions with a saturating clamp bit, which we do not
define. Do this rename so we can unambiguously add these missing
instructions.
The carry-in versions should also be renamed, but at least those had a
consistent _u32 name to begin with. The 16-bit instructions were also
renamed, but aren't ambiguous.
This does regress assembler error message quality in some cases. In
mismatched wave32/wave64 situations, this will switch from
"unsupported instruction" to "invalid operand", with the error
pointing at the wrong position. I couldn't quite follow how the
assembler selects these, but the previous behavior seemed accidental
to me. It looked like there was a partial attempt to handle this which
was never completed (i.e. there is an AMDGPUOperand::isBoolReg but it
isn't used for anything).
If the original register operand had a subregister, it wasn't getting
cleared. This resulted in reinterpreted the subreg index as
unrecognized target flags, which produced unparseable MIR.
Before this instruction supported output values, it fit fairly
naturally as a terminator. However, being a terminator while also
supporting outputs causes some trouble, as the physreg->vreg COPY
operations cannot be in the same block.
Modeling it as a non-terminator allows it to be handled the same way
as invoke is handled already.
Most of the changes here were created by auditing all the existing
users of MachineBasicBlock::isEHPad() and
MachineBasicBlock::hasEHPadSuccessor(), and adding calls to
isInlineAsmBrIndirectTarget or mayHaveInlineAsmBr, as appropriate.
Reviewed By: nickdesaulniers, void
Differential Revision: https://reviews.llvm.org/D79794
Condition `LiteralCount` is checked both in an outer and in an inner
`if` statement in `SIInstrInfo::verifyInstruction()`. This patch removes
the redundant inner check.
The issue was found using `clang-tidy` check under review
`misc-redundant-condition`. See https://reviews.llvm.org/D81272.
Differential Revision: https://reviews.llvm.org/D82555
Summary:
Add patterns to select s_cselect in the isel.
Handle more cases of implicit SCC accesses in si-fix-sgpr-copies
to allow new patterns to work.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, asbirlea, kerbowa, llvm-commits
Tags: #llvm
Re-commit D81925 with a bugfix D82370.
Differential Revision: https://reviews.llvm.org/D81925
Differential Revision: https://reviews.llvm.org/D82370
Summary:
Without fixImplicitOperands we may end up creating default implicit operands
that are the wrong wave size
Includes simple test that provokes insertBranch in the correct way to expose the
issue being fixed.
Change-Id: I92bdcdee9fcb7b4d91529b84e76a48ac8218483e
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82459
Summary:
Make use of both the - (1) clustered bytes and (2) cluster length, to decide on
the max number of mem ops that can be clustered. On an average, when loads
are dword or smaller, consider `5` as max threshold, otherwise `4`. This
heuristic is purely based on different experimentation conducted, and there is
no analytical logic here.
Reviewers: foad, rampitec, arsenm, vpykhtin
Reviewed By: rampitec
Subscribers: llvm-commits, kerbowa, hiraditya, t-tye, Anastasia, tpr, dstuttard, yaxunl, nhaehnle, wdng, jvesely, kzhuravl, thakis
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82393
Always prefer to clobber input SGPRs and restore them after the
spill. This applies to both spills to VGPRs and scratch.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D81914
Summary:
Add patterns to select s_cselect in the isel.
Handle more cases of implicit SCC accesses in si-fix-sgpr-copies
to allow new patterns to work.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, asbirlea, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81925
It seems to be a hardware defect that the half inline constants do not
work as expected for the 16-bit integer operations (the inverse does
work correctly). Experimentation seems to show these are really
reading the 32-bit inline constants, which can be observed by writing
inline asm using op_sel to see what's in the high half of the
constant. Theoretically we could fold the high halves of the 32-bit
constants using op_sel.
The *_asm_all.s MC tests are broken, and I don't know where the script
to autogenerate these are. I started manually fixing it, but there's
just too many cases to fix. This also does break the
assembler/disassembler support for these values, and I'm not sure what
to do about it. These are still valid encodings, so it seems like you
should be able to use them in some way. If you wrote assembly using
them, you could have really meant it (perhaps to read the high bits
with op_sel?). The disassembler will print the invalid literal
constant which will fail to re-assemble. The behavior is also
different depending on the use context. Consider this example, which
was previously accepted and encoded using the inline constant:
v_mad_i16 v5, v1, -4.0, v3
; encoding: [0x05,0x00,0xec,0xd1,0x01,0xef,0x0d,0x04]
In contexts where an inline immediate is required (such as on gfx8/9),
this will now be rejected. For gfx10, this will produce the literal
encoding and change the printed format:
v_mad_i16 v5, v1, 0xc400, v3
; encoding: [0x05,0x00,0x5e,0xd7,0x01,0xff,0x0d,0x04,0x00,0xc4,0x00,0x00]
This is just another variation of the issue that we don't perfectly
handle round trip assembly/disassembly due to not tracking how
immediates were encoded. This doesn't matter much in practice, since
compilers don't emit the suboptimal encoding. I doubt any users are
relying on this behavior (although I did make use of the old behavior
to figure out what was wrong).
Fixes bug 46302.
Summary:
Make use of both the - (1) clustered bytes and (2) cluster length, to decide on
the max number of mem ops that can be clustered. On an average, when loads
are dword or smaller, consider `5` as max threshold, otherwise `4`. This heuristic
is purely based on different experimentation conducted, and there is no analytical
logic here.
Reviewers: foad, rampitec, arsenm, vpykhtin
Reviewed By: foad, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, Anastasia, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81085
These are scalar instructions that change vector instructions, so they
should not be executed without any active lanes.
The implementation of -amdgpu-skip-threshold also seem to be backwards
from expected, since decreasing it prevents removal.
Summary:
While clustering mem ops, AMDGPU target needs to consider number of clustered bytes
to decide on max number of mem ops that can be clustered. This patch adds support to pass
number of clustered bytes to target mem ops clustering logic.
Reviewers: foad, rampitec, arsenm, vpykhtin, javedabsar
Reviewed By: foad
Subscribers: MatzeB, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, javed.absar, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80545
This will enable selecting non-entry block allocas. Skip the SP write
check in the base isSchedulingBoundary implementation to preserve the
previous scheduling behavior and avoid test churn. It's apparently for
compile time reasons, but if we were to use this more work would be
needed since in some of the failing tests, we seem to incorrectly get
hazard nops inserted.
All 3 passes that change instruction encodings were dropping MI
flags. This avoids scheduling regressions caused by setting
mayRaiseFPExceptions on FP instructions for non-strictfp functions.
The vector equivalent has backwards operands, but the scalar version
does not. The passes that use these hooks aren't enabled by default,
so this doesn't really change anything.
This a hack to fix illegal 32 to 16 bit copies.
The problem is when we make 16 bit subregs legal it creates
a huge amount of failures which can only be resolved at once
without a temporary hack like this.
The next step is to change operands, instruction definitions
and patterns until this hack is not needed.
Differential Revision: https://reviews.llvm.org/D79119
Summary: This change enables all kind of carry out ISD opcodes to be selected according to the node divergence.
Reviewers: rampitec, arsenm, vpykhtin
Reviewed By: rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78091
It allows it not to crash and analyze 16 bit subregs if those
appear in the instructions. At the same time it does not attempt
to reassign these. It still can correctly identify register
banks to let larger registers to be reassigned.
More work will be needed here when real instructions will use
these registers and more tests as well.
Differential Revision: https://reviews.llvm.org/D78772
These are used in SReg_32 and when we start to use SGPR_LO16
there will be compaints that not all registers in RC support
all subreg indexes. For now it is NFC.
Unused regunits are reserved so that verifier does not complain
about missing phys reg live-ins.
Differential Revision: https://reviews.llvm.org/D78591
These are used in SReg_32 and when we start to use SGPR_LO16
there will be compaints that not all registers in RC support
all subreg indexes. For now it is NFC.
Unused regunits are reserved so that verifier does not complain
about missing phys reg live-ins.
Differential Revision: https://reviews.llvm.org/D78591
Summary:
This seems like an obvious error - cut and paste issue?
The change does make a change to one of the lit tests - it stops s_buffer_load
re-ordering past an MUBUF instruction (which is not surprising).
Change-Id: I80be99de5b62af4f42e91af2591b76a52ac9efa6
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75686
Summary:
Making `Scale` a `TypeSize` in AArch64InstrInfo::getMemOpInfo,
has the effect that all places where this information is used
(notably, TargetInstrInfo::getMemOperandWithOffset) will need
to consider Scale - and derived, Offset - possibly being scalable.
This patch adds a new operand `bool &OffsetIsScalable` to
TargetInstrInfo::getMemOperandWithOffset and fixes up all
the places where this function is used, to consider the
offset possibly being scalable.
In most cases, this means bailing out because the algorithm does not
(or cannot) support scalable offsets in places where it does some
form of alias checking for example.
Reviewers: rovka, efriedma, kristof.beyls
Reviewed By: efriedma
Subscribers: wuzish, kerbowa, MatzeB, arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, javed.absar, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72758
Based on D72931
This adds a new feature called A16 which is enabled for gfx10.
gfx9 keeps the R128A16 feature so it can share all the instruction encodings
with gfx7/8.
Differential Revision: https://reviews.llvm.org/D73956
We are using countPopulation on a LaneBitmask to determine
a number of registers it covers. This is the assumption which
does not necessarily need to be true. It is not changed but
factored into a single call SIRegisterInfo::getNumCoveredRegs().
Some other places are cleaned up with respect to assumptions
about subreg indexes values and tablegen behavior.
Differential Revision: https://reviews.llvm.org/D74177
Stanislav Mekhanoshin