Using the legacy PM for the optimization pipeline is deprecated and in
the process of being removed. This is a small step in that direction.
For an example of migrating to the new PM:
853b57fe80
Debugify in OriginalDebugInfo mode, introduced with D82545,
runs only with legacy PassManager.
This patch enables this utility for the NewPM.
Differential Revision: https://reviews.llvm.org/D115351
Now that we have the sanitizer metadata that is actually on the global
variable, and now that we use debuginfo in order to do symbolization of
globals, we can delete the 'llvm.asan.globals' IR synthesis.
This patch deletes the 'location' part of the __asan_global that's
embedded in the binary as well, because it's unnecessary. This saves
about ~1.7% of the optimised non-debug with-asserts clang binary.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D127911
This is the first commit for the cmov-vs-branch optimization pass.
The goal is to develop a new profile-guided and target-independent cost/benefit analysis
for selecting conditional moves over branches when optimizing for performance.
Initially, this new pass is expected to be enabled only for instrumentation-based PGO.
RFC: https://discourse.llvm.org/t/rfc-cmov-vs-branch-optimization/6040
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D120230
A new pass DXILOpLowering was added.
It will scan all llvm intrinsics, create dxil op function if it can map to dxil op function.
Then translate call instructions on the intrinsic into call on dxil op function.
dxil op function will add i32 argument to the begining of args for dxil opcode.
So cannot use setCalledFunction to update the call instruction on intrinsic.
This commit only support sin to start the work.
Reviewed By: kuhar, beanz
Differential Revision: https://reviews.llvm.org/D124805
Matches the error message we emit with `-opt -O# --passes=foo`.
Otherwise we crash later on.
Makes #55320 much less confusing.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D125196
The legacy passes are deprecated now and would be removed in near
future. This patch tries to remove legacy passes in coroutines.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D123918
Or rather, error out if it is set to something other than ON. This
removes the ability to enable the legacy pass manager by default,
but does not remove the ability to explicitly enable it through
various flags like -flegacy-pass-manager or -enable-new-pm=0.
I checked, and our test suite definitely doesn't pass with
LLVM_ENABLE_NEW_PASS_MANAGER=OFF anymore.
Differential Revision: https://reviews.llvm.org/D123126
VectorizerStart extension is module callback in old PM, but is function
callback in new PM. We lack a module extension point between end of
buildModuleSimplificationPipeline and the function optimization
(including vectorizer) pipeline. So this patch adds a new module
extension point before the function optimization pipeline.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D122296
This is legacy PM-specific, which is deprecated.
Uses of this should be replaced with a corresponding `-passes='print<foo>'`.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D122420
Before we start addressing the issue with having
a lot of false positives when using debugify in
the original mode, we have made a few patches that
should speed up the execution of the testing
utility Passes.
For example, when testing a large project
(let's say LLVM project itself), we can face
a lot of potential DI issues. Usually, we use
-verify-each-debuginfo-preserve (that is very
similar to -debugify-each) -- it collects
DI metadata before each Pass, and after the Pass
it checks if the Pass preserved the DI metadata.
However, we can speed up this process, since we
don't need to collect DI metadata before each
Pass -- we could use the DI metadata that are
collected after the previous Pass from
the pipeline as an input for the next Pass.
This patch speeds up the utility for ~2x.
Differential Revision: https://reviews.llvm.org/D115622
The `opt -analyze` option only works with the legacy pass manager and might be removed in the future, as explained in llvm.org/PR53733. This patch introduced -polly-print-* passes that print what the pass would print with the `-analyze` option and replaces all uses of `-analyze` in the regression tests.
There are two exceptions: `CodeGen\single_loop_param_less_equal.ll` and `CodeGen\loop_with_condition_nested.ll` use `-analyze on the `-loops` pass which is not part of Polly.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120782
This is a clean-up patch. The functional pass was rolled into the module pass in D112732.
Reviewed By: vitalybuka, aeubanks
Differential Revision: https://reviews.llvm.org/D120674
This PR fixes the tests for the `OptimizerLast` extension point in the new pass manager. The extension point uses module passes, but it was being tested with a function pass.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120581
This PR adds two extension points to the default LTO pipeline in PassBuilder, one at the beginning and one at the end. These two extension points already existed in the old pass manager, the aim is to replicate the same functionality in the new one.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120491
The RegionPrinter, RegionOnlyPrinter, RegionViewer and RegionOnlyViewer passes have not yet been ported to the new pass manager.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D119897
The introduction and some examples are on this page:
https://devblogs.microsoft.com/cppblog/announcing-jmc-stepping-in-visual-studio/
The `/JMC` flag enables these instrumentations:
- Insert at the beginning of every function immediately after the prologue with
a call to `void __fastcall __CheckForDebuggerJustMyCode(unsigned char *JMC_flag)`.
The argument for `__CheckForDebuggerJustMyCode` is the address of a boolean
global variable (the global variable is initialized to 1) with the name
convention `__<hash>_<filename>`. All such global variables are placed in
the `.msvcjmc` section.
- The `<hash>` part of `__<hash>_<filename>` has a one-to-one mapping
with a directory path. MSVC uses some unknown hashing function. Here I
used DJB.
- Add a dummy/empty COMDAT function `__JustMyCode_Default`.
- Add `/alternatename:__CheckForDebuggerJustMyCode=__JustMyCode_Default` link
option via ".drectve" section. This is to prevent failure in
case `__CheckForDebuggerJustMyCode` is not provided during linking.
Implementation:
All the instrumentations are implemented in an IR codegen pass. The pass is placed immediately before CodeGenPrepare pass. This is to not interfere with mid-end optimizations and make the instrumentation target-independent (I'm still working on an ELF port in a separate patch).
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D118428
If you don't include a target that directly references CFGuard it
doesn't get built into opt or the llvm library build, which causes some
test cases to fail.
Including this in opt explicitly resolve those issues.
Adding -debugify and -check-debugify in the PassRegistry will make
sure the passes are listed properly by -print-pipeline-passes as
well as -print-passes.
It also allows removal of the custom pipeline parsing callback that
has been used in the NewPMDriver.
Differential Revision: https://reviews.llvm.org/D118369
These were added to prevent functions from being removed by WPO.
But that doesn't make sense, correct WPO will not remove functions we actually use.
I noticed these because compiling cc1_main.cpp was pulling in random LLVM pass headers.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D112971
Right now when we see -O# we add the corresponding 'default<O#>' into
the list of passes to run when translating legacy -pass-name. This has
the side effect of not using the default AA pipeline.
Instead, treat -O# as -passes='default<O#>', but don't allow any other
-passes or -pass-name. I think we can keep `opt -O#` as shorthand for
`opt -passes='default<O#>` but disallow anything more than just -O#.
Tests need to be updated to not use `opt -O# -pass-name`.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D112036
This moves the registry higher in the LLVM library dependency stack.
Every client of the target registry needs to link against MC anyway to
actually use the target, so we might as well move this out of Support.
This allows us to ensure that Support doesn't have includes from MC/*.
Differential Revision: https://reviews.llvm.org/D111454
For strided accesses the loop vectorizer seems to prefer creating a
vector induction variable with a start value of the form
<i32 0, i32 1, i32 2, ...>. This value will be incremented each
loop iteration by a splat constant equal to the length of the vector.
Within the loop, arithmetic using splat values will be done on this
vector induction variable to produce indices for a vector GEP.
This pass attempts to dig through the arithmetic back to the phi
to create a new scalar induction variable and a stride. We push
all of the arithmetic out of the loop by folding it into the start,
step, and stride values. Then we create a scalar GEP to use as the
base pointer for a strided load or store using the computed stride.
Loop strength reduce will run after this pass and can do some
cleanups to the scalar GEP and induction variable.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D107790
Added opt option -print-pipeline-passes to print a -passes compatible
string describing the built pass pipeline.
As an example:
$ opt -enable-new-pm=1 -adce -licm -simplifycfg -o /dev/null /dev/null -print-pipeline-passes
verify,function(adce),function(loop-mssa(licm)),function(simplifycfg<bonus-inst-threshold=1;no-forward-switch-cond;no-switch-to-lookup;keep-loops;no-hoist-common-insts;no-sink-common-insts>),verify,BitcodeWriterPass
At the moment this is best-effort only and there are some known
limitations:
- Not all passes accepting parameters will print their parameters
(currently only implemented for simplifycfg).
- Some ClassName to pass-name mappings are not unique.
- Some ClassName to pass-name mappings are missing (e.g.
BitcodeWriterPass).
Differential Revision: https://reviews.llvm.org/D108298
Added opt option -print-pipeline-passes to print a -passes compatible
string describing the built pass pipeline.
As an example:
$ opt -enable-new-pm=1 -adce -licm -simplifycfg -o /dev/null /dev/null -print-pipeline-passes
verify,function(adce),function(loop-mssa(licm)),function(simplifycfg<bonus-inst-threshold=1;no-forward-switch-cond;no-switch-to-lookup;keep-loops;no-hoist-common-insts;no-sink-common-insts>),verify,BitcodeWriterPass
At the moment this is best-effort only and there are some known
limitations:
- Not all passes accepting parameters will print their parameters
(currently only implemented for simplifycfg).
- Some ClassName to pass-name mappings are not unique.
- Some ClassName to pass-name mappings are missing (e.g.
BitcodeWriterPass).
A couple of passes that are parameterized in new-PM used different
pass names (in cmd line interface) while using the same pass class
name. This patch updates the PassRegistry to model pass parameters
more properly using PASS_WITH_PARAMS.
Reason for the change is to ensure that we have a 1-1 mapping
between class name and pass name (when disregarding the params).
With a 1-1 mapping it is more obvious which pass name to use in
options such as -debug-only, -print-after etc.
The opt -passes syntax is changed for the following passes:
early-cse-memssa => early-cse<memssa>
post-inline-ee-instrument => ee-instrument<post-inline>
loop-extract-single => loop-extract<single>
lower-matrix-intrinsics-minimal => lower-matrix-intrinsics<minimal>
This patch is not updating pass names in docs/Passes.rst. Not quite
sure what the status is for that document (e.g. when it comes to
listing pass paramters). It is only loop-extract-single that is
mentioned in Passes.rst today, out of the passes mentioned above.
Differential Revision: https://reviews.llvm.org/D108362
Refactored implementation of AddressSanitizerPass and
HWAddressSanitizerPass to use pass options similar to passes like
MemorySanitizerPass. This makes sure that there is a single mapping
from class name to pass name (needed by D108298), and options like
-debug-only and -print-after makes a bit more sense when (despite
that it is the unparameterized pass name that should be used in those
options).
A result of the above is that some pass names are removed in favor
of the parameterized versions:
- "khwasan" is now "hwasan<kernel;recover>"
- "kasan" is now "asan<kernel>"
- "kmsan" is now "msan<kernel>"
Differential Revision: https://reviews.llvm.org/D105007
This patch implements Flow Sensitive Sample FDO (FSAFDO) profile
loader. We have two profile loaders for FS profile,
one before RegAlloc and one before BlockPlacement.
To enable it, when -fprofile-sample-use=<profile> is specified,
add "-enable-fs-discriminator=true \
-disable-ra-fsprofile-loader=false \
-disable-layout-fsprofile-loader=false"
to turn on the FS profile loaders.
Differential Revision: https://reviews.llvm.org/D107878
Previoulsy debug-info-for-profiling and pseudo-probe-for-profiling are mutual exclusive because they compete the dwarf discrimnator for callsites on the IR. This changes allows to use the two switches together. The side effect is that callsite discriminators will be taken by pseudo probe, while discriminators for other instructions are still available for AutoFDO use. This is less than ideal, however, it still allows us a chance to smoothly transition from AutoFDO to CSSPGO, by collecting both profiles from a CSSPGO binary.
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D107876
Pulled out the OptimizationLevel class from PassBuilder in order to be able to access it from within the PassManager and avoid include conflicts.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D107025
This patch make coroutine passes run by default in LLVM pipeline. Now
the clang and opt could handle IR inputs containing coroutine intrinsics
without special options.
It should be fine. On the one hand, the coroutine passes seems to be stable
since there are already many projects using coroutine feature.
On the other hand, the coroutine passes should do nothing for IR who doesn't
contain coroutine intrinsic.
Test Plan: check-llvm
Reviewed by: lxfind, aeubanks
Differential Revision: https://reviews.llvm.org/D105877
We don't want to start updating tests to use opaque pointers until we're
close to the opaque pointer transition. However, before the transition
we want to run tests as if pointers are opaque pointers to see if there
are any crashes.
At some point when we have a flag to only create opaque pointers in the
bitcode and textual IR readers, and when we have fixed all places that
try to read a pointee type, this flag will be useless. However, until
then, this can help us find issues more easily.
Since the cl::opt is read into LLVMContext, we need to make sure
LLVMContext is created after cl::ParseCommandLineOptions().
Previously ValueEnumerator would visit the value types of global values
via the pointer type, but with opaque pointers we have to manually visit
the value type.
Reviewed By: nikic, dexonsmith
Differential Revision: https://reviews.llvm.org/D103503
Arthur Eubanks