This is recommit of 6c8041aa0f, reverted in de044f7562 because of some
fails. Original commit message is below.
This change allow a CastExpr to have optional FPOptionsOverride object,
stored in trailing storage. Of all cast nodes only ImplicitCastExpr,
CStyleCastExpr, CXXFunctionalCastExpr and CXXStaticCastExpr are allowed
to have FPOptions.
Differential Revision: https://reviews.llvm.org/D85960
This change allow a CastExpr to have optional FPOptionsOverride object,
stored in trailing storage. Of all cast nodes only ImplicitCastExpr,
CStyleCastExpr, CXXFunctionalCastExpr and CXXStaticCastExpr are allowed
to have FPOptions.
Differential Revision: https://reviews.llvm.org/D85960
When parsing a C++17 binding declaration, we first create the
BindingDecls in Sema::ActOnDecompositionDeclarator, and then build the
DecompositionDecl in Sema::ActOnVariableDeclarator, so the contained
BindingDecls are never null. But when deserializing, we read the
DecompositionDecl with all properties before filling in the Bindings.
Among other things, reading a declaration reads whether it's invalid,
then calling setInvalidDecl which assumes that all bindings of the
DecompositionDecl are available, but that isn't the case.
Deserialization should just set all properties directly without invoking
subsequent functions, so we just set the flag without using the setter.
Fixes PR34960.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D86207
While parsing LateParsedTemplates, Clang assumes that the Global DeclID matches
with the Local DeclID of a Decl. This is not the case when we have multiple
dependent modules , each having their own LateParsedTemplate section. In such a
case, a Local/Global DeclID confusion occurs which leads to improper casting of
FunctionDecl's.
This commit creates a Vector to map the LateParsedTemplate section of each
Module with their module file and therefore resolving the Global/Local DeclID
confusion.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D86514
cache for implicit modules.
The ModuleManager's use of FileEntry nodes as the keys for its map of
loaded modules is less than ideal. Uniqueness for FileEntry nodes is
maintained by FileManager, which in turn uses inode numbers on hosts
that support that. When coupled with the module cache's proclivity for
turning over and deleting stale PCMs, this means entries for different
module files can wind up reusing the same underlying inode. When this
happens, subsequent accesses to the Modules map will disagree on the
ModuleFile associated with a given file.
In general, it is not sufficient to resolve this conundrum with a type
like FileEntryRef that stores the name of the FileEntry node on first
access because of path canonicalization issues. However, the paths
constructed for implicit module builds are fully under Clang's
control. We *can*, therefore, rely on their structure being consistent
across operating systems and across subsequent accesses to the Modules
map.
To mitigate the effects of inode reuse, perform an extra name check when
implicit modules are returned from the cache. This has the effect of
forcing reused FileEntry nodes to stomp over existing-but-stale entries
in the cache, which simulates a miss - exactly the desired behavior.
rdar://48443680
Patch by Robert Widmann!
Differential Revision: https://reviews.llvm.org/D86823
This patch defaults to -mtune=generic unless -march is present. If -march is present we'll use the empty string unless its overridden by mtune. The back should use the target cpu if the tune-cpu isn't present.
It also adds AST serialization support to fix some tests that emit AST and parse it back. These tests diff the IR against the output from not going through AST. So if we don't serialize the tune CPU we fail the diff.
Differential Revision: https://reviews.llvm.org/D86488
OpenMP 5.0 supports nested declare target regions. So, in general,it is
allow to mark a declarationas declare target with different device_type
or link type. Patch adds support for such kind of nesting.
Differential Revision: https://reviews.llvm.org/D86239
This commit teaches ASTDeclReader::attachPreviousDecl to successfully merge
two Decl's when one contains an inheritable attribute like the
MSInheritanceAttr. Usually, attributes that are needed to be present along the
redeclaration chain are attached during ASTReading from
ASTDeclReader::attachPreviousDecl, but no such thing is done for inheritable
attributes. Currently, only the logic for merging MSInheritanceAttr is
provided.
This addresses a FIXME in ASTReader.
Modules were already re-exported for Preprocessor, but not for Sema.
The result was that, with -fmodules-local-submodule-visibility, all AST
nodes belonging to a module that was loaded in a premable where not
accesible from the main part of the file and a diagnostic recommending
importing those modules would be generated.
Differential Revision: https://reviews.llvm.org/D86069
This patch moves FixedPointSemantics and APFixedPoint
from Clang to LLVM ADT.
This will make it easier to use the fixed-point
classes in LLVM for constructing an IR builder for
fixed-point and for reusing the APFixedPoint class
for constant evaluation purposes.
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-August/144025.html
Reviewed By: leonardchan, rjmccall
Differential Revision: https://reviews.llvm.org/D85312
Summary:
Introduced OMPChildren class to handle all associated clauses, statement
and child expressions/statements. It allows to represent some directives
more correctly (like flush, depobj etc. with pseudo clauses, ordered
depend directives, which are standalone, and target data directives).
Also, it will make easier to avoid using of CapturedStmt in directives,
if required (atomic, tile etc. directives).
Also, it simplifies serialization/deserialization of the
executable/declarative directives.
Reduces number of allocation operations for mapper declarations.
Reviewers: jdoerfert
Subscribers: yaxunl, guansong, jfb, cfe-commits, sstefan1, aaron.ballman, caomhin
Tags: #clang
Differential Revision: https://reviews.llvm.org/D83261
`TemplateTypeParmDecl::hasTypeConstraint` is not a safe guard for
checking `TemplateTypeParmDecl::getTypeConstraint()` result is null.
in somecases (e.g. implicit deduction guide templates synthesized from the
constructor, immediately-declared constraint is not formed because of an error),
hasTypeConstraint returns false, and getTypeConstraint returns a nullptr.
Fix https://bugs.llvm.org/show_bug.cgi?id=46790
Differential Revision: https://reviews.llvm.org/D84455
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
This change allow a CallExpr to have optional FPOptionsOverride object,
stored in trailing storage. The implementaion is made similar to the way
used in BinaryOperator.
Differential Revision: https://reviews.llvm.org/D84343
I was trying to pick this up a bit when reviewing D48426 (& perhaps D69778) - in any case, looks like D48426 added a module level flag that might not be needed.
The D48426 implementation worked by setting a module level flag, then code generating contents from the PCH a special case in ASTContext::DeclMustBeEmitted would be used to delay emitting the definition of these functions if they came from a Module with this flag.
This strategy is similar to the one initially implemented for modular codegen that was removed in D29901 in favor of the modular decls list and a bit on each decl to specify whether it's homed to a module.
One major difference between PCH object support and modular code generation, other than the specific list of decls that are homed, is the compilation model: MSVC PCH modules are built into the object file for some other source file (when compiling that source file /Yc is specified to say "this compilation is where the PCH is homed"), whereas modular code generation invokes a separate compilation for the PCH alone. So the current modular code generation test of to decide if a decl should be emitted "is the module where this decl is serialized the current main file" has to be extended (as Lubos did in D69778) to also test the command line flag -building-pch-with-obj.
Otherwise the whole thing is basically streamlined down to the modular code generation path.
This even offers one extra material improvement compared to the existing divergent implementation: Homed functions are not emitted into object files that use the pch. Instead at -O0 they are not emitted into the IR at all, and at -O1 they are emitted using available_externally (existing functionality implemented for modular code generation). The pch-codegen test has been updated to reflect this new behavior.
[If possible: I'd love it if we could not have the extra MSVC-style way of accessing dllexport-pch-homing, and just do it the modular codegen way, but I understand that it might be a limitation of existing build systems. @hans / @thakis: Do either of you know if it'd be practical to move to something more similar to .pcm handling, where the pch itself is passed to the compilation, rather than homed as a side effect of compiling some other source file?]
Reviewers: llunak, hans
Differential Revision: https://reviews.llvm.org/D83652
Allow to build PCH's (with -building-pch-with-obj and the extra .o file)
with -fmodules-codegen -fmodules-debuginfo to allow emitting shared code
into the extra .o file, similarly to how it works with modules. A bit of
a misnomer, but the underlying functionality is the same. This saves up
to 20% of build time here. The patch is fairly simple, it basically just
duplicates -fmodules checks to also alternatively check
-building-pch-with-obj.
This already got committed as cbc9d22e49,
but then got reverted in 7ea9a6e022
because of PR44953, as discussed in D74846. This is a corrected version
which does not include two places for the PCH case that aren't included
in the modules -fmodules-codegen path either.
Differential Revision: https://reviews.llvm.org/D69778
05843dc6ab changed the serialization of the body
of LambdaExpr to avoid a mutation in LambdaExpr::getBody and to avoid a missing
body in LambdaExpr::children.
Unfortunately this replaced one bug by another: we are now duplicating the body
during deserialization; that is after deserialization the identity:
E->getBody() == E->getCallOperator()->getBody() does not hold.
Fix that by instead lazily loading the body from the call operator when needed.
Differential Revision: https://reviews.llvm.org/D83009
Reviewed By: martong, aaron.ballman, vabridgers
Summary:
This patch is removing the custom enumeration for OpenMP Directives and Clauses and replace them
with the newly tablegen generated one from llvm/Frontend. This is a first patch and some will follow to share the same
infrastructure where possible. The next patch should use the clauses allowance defined in the tablegen file.
Reviewers: jdoerfert, DavidTruby, sscalpone, kiranchandramohan, ichoyjx
Reviewed By: DavidTruby, ichoyjx
Subscribers: jholewinski, cfe-commits, dblaikie, MaskRay, ymandel, ichoyjx, mgorny, yaxunl, guansong, jfb, sstefan1, aaron.ballman, llvm-commits
Tags: #llvm, #flang, #clang
Differential Revision: https://reviews.llvm.org/D82906
This reverts commit defd43a5b3.
with correction to solve msan report
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
This reverts commit b55d723ed6.
Reapply Modify FPFeatures to use delta not absolute settings
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
Summary:
As discussed previously when landing patch for OpenMP in Flang, the idea is
to share common part of the OpenMP declaration between the different Frontend.
While doing this it was thought that moving to tablegen instead of Macros will also
give a cleaner and more powerful way of generating these declaration.
This first part of a future series of patches is setting up the base .td file for
DirectiveLanguage as well as the OpenMP version of it. The base file is meant to
be used by other directive language such as OpenACC.
In this first patch, the Directive and Clause enums are generated with tablegen
instead of the macros on OMPConstants.h. The next pacth will extend this
to other enum and move the Flang frontend to use it.
Reviewers: jdoerfert, DavidTruby, fghanim, ABataev, jdenny, hfinkel, jhuber6, kiranchandramohan, kiranktp
Reviewed By: jdoerfert, jdenny
Subscribers: arphaman, martong, cfe-commits, mgorny, yaxunl, hiraditya, guansong, jfb, sstefan1, aaron.ballman, llvm-commits
Tags: #llvm, #openmp, #clang
Differential Revision: https://reviews.llvm.org/D81736
This allows clients to use the idiom:
if (GlobalIndex->lookupIdentifier(Name, FoundModules)) {
// work on the FoundModules
}
This is also a minor performance improvent for clang.
Differential Revision: https://reviews.llvm.org/D81077
The serialization of ConstantExpr has currently a number of problems:
- Some fields are just not serialized (ConstantExprBits.APValueKind and
ConstantExprBits.IsImmediateInvocation).
- ASTStmtReader::VisitConstantExpr forgets to add the trailing APValue
to the list of objects to be destroyed when the APValue needs cleanup.
While we are at it, bring the serialization of ConstantExpr more in-line
with what is done with the other expressions by doing the following NFCs:
- Get rid of ConstantExpr::DefaultInit. It is better to not initialize
the fields of an empty ConstantExpr since this will allow msan to
detect if a field was not deserialized.
- Move the initialization of the fields of ConstantExpr to the constructor;
ConstantExpr::Create allocates the memory and ConstantExpr::ConstantExpr
is responsible for the initialization.
Review after commit since this is a straightforward mechanical fix
similar to the other serialization fixes.
The body of LambdaExpr is currently not properly serialized. Instead
LambdaExpr::getBody checks if the body has been already deserialized and if
not mutates LambdaExpr. This can be observed with an AST dump test, where
the body of the LambdaExpr will be null.
The mutation in LambdaExpr::getBody was left because of another bug: it is not
true that the body of a LambdaExpr is always a CompoundStmt; it can also be
a CoroutineBodyStmt wrapping a CompoundStmt. This is fixed by returning a
Stmt * from getBody and introducing a convenience function getCompoundStmtBody
which always returns a CompoundStmt *. This function can be used by callers who
do not care about the coroutine node.
Happily all but one user of getBody treat it as a Stmt * and so this change
is non-intrusive.
Differential Revision: https://reviews.llvm.org/D81787
Reviewed By: aaron.ballman
This saves sizeof(void *) bytes per LambdaExpr.
Review-after-commit since this is a straightforward change similar
to the work done on other nodes. NFC.
Also invert the sense of the return value.
As pointed out by the FIXME that this change resolves, isHidden() wasn't
a very accurate name for this function.
I haven't yet changed any of the strings that are output in
ASTDumper.cpp / JSONNodeDumper.cpp / TextNodeDumper.cpp in response to
whether isHidden() is set because
a) I'm not sure whether it's actually desired to change these strings
(would appreciate feedback on this), and
b) In any case, I'd like to get this pure rename out of the way first,
without any changes to tests. Changing the strings that are output in
the various ...Dumper.cpp files will require changes to quite a few
tests, and I'd like to make those in a separate change.
Differential Revision: https://reviews.llvm.org/D81392
Reviewed By: rsmith
eee944e7f adds the new BuiltinBitCastExpr, but does not set the Code member of
ASTStmtWriter. This is not correct and causes an assertion failue in
ASTStmtWriter::emit() when building PCHs that contain __builtin_bit_cast. This
commit adds serialization::EXPR_BUILTIN_BIT_CAST and handles
ASTStmtWriter::Code properly.
Differential revision: https://reviews.llvm.org/D80360
Summary:
This record is constructed by hashing the bytes of the AST block in a similiar
fashion to the SIGNATURE record. This new signature only means anything if the
AST block is fully relocatable, i.e. it does not embed absolute offsets within
the PCM file. This change ensure this does not happen by replacing these offsets
with offsets relative to the nearest relevant subblock of the AST block.
Reviewers: Bigcheese, dexonsmith
Subscribers: dexonsmith, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D80383
This change got missed while upstreaming
https://reviews.llvm.org/D77772. This is the part of that change that
actually passes the correct arguments when opening a PCM.
The test didn't catch this because it starts at the
`MemoryBuffer::getOpenFile` level. It's not really possible to test
`ModuleManager::addModule` itself to verify how the file was opened.
This bit was assumed to be always false for ParmVarDecls, but attribute
objc_externally_retained now can produce it.
Differential revision: https://reviews.llvm.org/D74417
Summary:
This patch upstreams support for a new storage only bfloat16 C type.
This type is used to implement primitive support for bfloat16 data, in
line with the Bfloat16 extension of the Armv8.6-a architecture, as
detailed here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
The bfloat type, and its properties are specified in the Arm Architecture
Reference Manual:
https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile
In detail this patch:
- introduces an opaque, storage-only C-type __bf16, which introduces a new bfloat IR type.
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
The following people contributed to this patch:
- Luke Cheeseman
- Momchil Velikov
- Alexandros Lamprineas
- Luke Geeson
- Simon Tatham
- Ties Stuij
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, fpetrogalli
Reviewed By: SjoerdMeijer
Subscribers: labrinea, majnemer, asmith, dexonsmith, kristof.beyls, arphaman, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76077
This patch implements matrix index expressions
(matrix[RowIdx][ColumnIdx]).
It does so by introducing a new MatrixSubscriptExpr(Base, RowIdx, ColumnIdx).
MatrixSubscriptExprs are built in 2 steps in ActOnMatrixSubscriptExpr. First,
if the base of a subscript is of matrix type, we create a incomplete
MatrixSubscriptExpr(base, idx, nullptr). Second, if the base is an incomplete
MatrixSubscriptExpr, we create a complete
MatrixSubscriptExpr(base->getBase(), base->getRowIdx(), idx)
Similar to vector elements, it is not possible to take the address of
a MatrixSubscriptExpr.
For CodeGen, a new MatrixElt type is added to LValue, which is very
similar to VectorElt. The only difference is that we may need to cast
the type of the base from an array to a vector type when accessing it.
Reviewers: rjmccall, anemet, Bigcheese, rsmith, martong
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D76791
This operator is intended for casting between
pointers to objects in different address spaces
and follows similar logic as const_cast in C++.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60193
This patch adds a matrix type to Clang as described in the draft
specification in clang/docs/MatrixSupport.rst. It introduces a new option
-fenable-matrix, which can be used to enable the matrix support.
The patch adds new MatrixType and DependentSizedMatrixType types along
with the plumbing required. Loads of and stores to pointers to matrix
values are lowered to memory operations on 1-D IR arrays. After loading,
the loaded values are cast to a vector. This ensures matrix values use
the alignment of the element type, instead of LLVM's large vector
alignment.
The operators and builtins described in the draft spec will will be added in
follow-up patches.
Reviewers: martong, rsmith, Bigcheese, anemet, dexonsmith, rjmccall, aaron.ballman
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D72281
Summary:
I was surprised to see the LocalOffset can exceed uint32_t, but it
does happen and lead to crashes in one of our internal huge TU with a large
preamble.
with this patch, the crash is gone.
Reviewers: sammccall
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D79397
test cases
Add support for #pragma float_control
Reviewers: rjmccall, erichkeane, sepavloff
Differential Revision: https://reviews.llvm.org/D72841
This reverts commit 85dc033cac, and makes
corrections to the test cases that failed on buildbots.
Fix a few bugs where we would fail to properly determine header to
module correspondence when determining whether to suggest a #include or
import, and suggest a #include more often in language modes where there
is no import syntax. Generally, if the target is in a header with
include guards or #pragma once, we should suggest either #including or
importing that header, and not importing a module that happens to
textually include it.
In passing, improve the notes we attach to the corresponding
diagnostics: calling an entity that we couldn't see "previous" is
confusing.
This is a code clean up of the PropertyAttributeKind and
ObjCPropertyAttributeKind enums in ObjCPropertyDecl and ObjCDeclSpec that are
exactly identical. This non-functional change consolidates these enums
into one. The changes are to many files across clang (and comments in LLVM) so
that everything refers to the new consolidated enum in DeclObjCCommon.h.
2nd Landing Attempt...
Differential Revision: https://reviews.llvm.org/D77233
This is a code clean up of the PropertyAttributeKind and
ObjCPropertyAttributeKind enums in ObjCPropertyDecl and ObjCDeclSpec that are
exactly identical. This non-functional change consolidates these enums
into one. The changes are to many files across clang (and comments in LLVM) so
that everything refers to the new consolidated enum in DeclObjCCommon.h.
Differential Revision: https://reviews.llvm.org/D77233
whether they have missing header files.
Whether a module's headers happen to be present on the local file system
should make no difference to whether we make its contents visible when
importing another module that re-exports it. If we have an up-to-date
AST file that we can load, that's all that matters.
This fixes the ability to header syntax checking for modular headers in
C++20 mode (or in prior modes where -fmodules-local-submodule-visibility
is enabled but -fmodules is not).
modules too.
This more accurately reflects the semantics of this flag, as distinct
from "IsAvailable", which (in an explicit modules world) only describes
whether a module is buildable, not whether it's importable.
This reverts commit 61ba1481e2.
I'm reverting this because it breaks the lldb build with
incomplete switch coverage warnings. I would fix it forward,
but am not familiar enough with lldb to determine the correct
fix.
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:3958:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4633:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4889:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
Introduction/Motivation:
LLVM-IR supports integers of non-power-of-2 bitwidth, in the iN syntax.
Integers of non-power-of-two aren't particularly interesting or useful
on most hardware, so much so that no language in Clang has been
motivated to expose it before.
However, in the case of FPGA hardware normal integer types where the
full bitwidth isn't used, is extremely wasteful and has severe
performance/space concerns. Because of this, Intel has introduced this
functionality in the High Level Synthesis compiler[0]
under the name "Arbitrary Precision Integer" (ap_int for short). This
has been extremely useful and effective for our users, permitting them
to optimize their storage and operation space on an architecture where
both can be extremely expensive.
We are proposing upstreaming a more palatable version of this to the
community, in the form of this proposal and accompanying patch. We are
proposing the syntax _ExtInt(N). We intend to propose this to the WG14
committee[1], and the underscore-capital seems like the active direction
for a WG14 paper's acceptance. An alternative that Richard Smith
suggested on the initial review was __int(N), however we believe that
is much less acceptable by WG14. We considered _Int, however _Int is
used as an identifier in libstdc++ and there is no good way to fall
back to an identifier (since _Int(5) is indistinguishable from an
unnamed initializer of a template type named _Int).
[0]https://www.intel.com/content/www/us/en/software/programmable/quartus-prime/hls-compiler.html)
[1]http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2472.pdf
Differential Revision: https://reviews.llvm.org/D73967
Summary:
Clang uses 32-bit integers for storing bit offsets from the beginning of
the file that results in 512M limit on AST file. This diff replaces
absolute offsets with relative offsets from the beginning of
corresponding data structure when it is possible. And uses 64-bit
offsets for DeclOffests and TypeOffssts because these coder AST
section may easily exceeds 512M alone.
This diff breaks AST file format compatibility so VERSION_MAJOR bumped.
Test Plan:
Existing clang AST serialization tests
Tested on clangd with ~700M and ~900M preamble files
check-clang with ubsan
Reviewers: rsmith, dexonsmith
Subscribers: ilya-biryukov, kadircet, usaxena95, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76594
Summary:
Clang uses 32-bit integers for storing bit offsets from the beginning of
the file that results in 512M limit on AST file. This diff replaces
absolute offsets with relative offsets from the beginning of
corresponding data structure when it is possible. And uses 64-bit
offsets for DeclOffests and TypeOffssts because these coder AST
section may easily exceeds 512M alone.
This diff breaks AST file format compatibility so VERSION_MAJOR bumped.
Test Plan:
Existing clang AST serialization tests
Tested on clangd with ~700M and ~900M preamble files
Reviewers: rsmith, dexonsmith
Subscribers: ilya-biryukov, kadircet, usaxena95, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76594
Summary:
Previously, we treated CXXUuidofExpr as quite a special case: it was the
only kind of expression that could be a canonical template argument, it
could be a constant lvalue base object, and so on. In addition, we
represented the UUID value as a string, whose source form we did not
preserve faithfully, and that we partially parsed in multiple different
places.
With this patch, we create an MSGuidDecl object to represent the
implicit object of type 'struct _GUID' created by a UuidAttr. Each
UuidAttr holds a pointer to its 'struct _GUID' and its original
(as-written) UUID string. A non-value-dependent CXXUuidofExpr behaves
like a DeclRefExpr denoting that MSGuidDecl object. We cache an APValue
representation of the GUID on the MSGuidDecl and use it from constant
evaluation where needed.
This allows removing a lot of the special-case logic to handle these
expressions. Unfortunately, many parts of Clang assume there are only
a couple of interesting kinds of ValueDecl, so the total amount of
special-case logic is not really reduced very much.
This fixes a few bugs and issues:
* PR38490: we now support reading from GUID objects returned from
__uuidof during constant evaluation.
* Our Itanium mangling for a non-instantiation-dependent template
argument involving __uuidof no longer depends on which CXXUuidofExpr
template argument we happened to see first.
* We now predeclare ::_GUID, and permit use of __uuidof without
any header inclusion, better matching MSVC's behavior. We do not
predefine ::__s_GUID, though; that seems like a step too far.
* Our IR representation for GUID constants now uses the correct IR type
wherever possible. We will still fall back to using the
{i32, i16, i16, [8 x i8]}
layout if a definition of struct _GUID is not available. This is not
ideal: in principle the two layouts could have different padding.
Reviewers: rnk, jdoerfert
Subscribers: arphaman, cfe-commits, aeubanks
Tags: #clang
Differential Revision: https://reviews.llvm.org/D78171
Summary:
This patch adds the EXPR_FIXEDPOINT_LITERAL AST
code to serialize FixedPointLiterals. They were previously
being serialized with the code for integer literals, which
doesn't work properly.
Reviewers: leonardchan, rjmccall
Reviewed By: leonardchan, rjmccall
Subscribers: vabridgers, JesperAntonsson, bjope, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D57226
Now compiler defines 5 sets of constants to represent rounding mode.
These are:
1. `llvm::APFloatBase::roundingMode`. It specifies all 5 rounding modes
defined by IEEE-754 and is used in `APFloat` implementation.
2. `clang::LangOptions::FPRoundingModeKind`. It specifies 4 of 5 IEEE-754
rounding modes and a special value for dynamic rounding mode. It is used
in clang frontend.
3. `llvm::fp::RoundingMode`. Defines the same values as
`clang::LangOptions::FPRoundingModeKind` but in different order. It is
used to specify rounding mode in in IR and functions that operate IR.
4. Rounding mode representation used by `FLT_ROUNDS` (C11, 5.2.4.2.2p7).
Besides constants for rounding mode it also uses a special value to
indicate error. It is convenient to use in intrinsic functions, as it
represents platform-independent representation for rounding mode. In this
role it is used in some pending patches.
5. Values like `FE_DOWNWARD` and other, which specify rounding mode in
library calls `fesetround` and `fegetround`. Often they represent bits
of some control register, so they are target-dependent. The same names
(not values) and a special name `FE_DYNAMIC` are used in
`#pragma STDC FENV_ROUND`.
The first 4 sets of constants are target independent and could have the
same numerical representation. It would simplify conversion between the
representations. Also now `clang::LangOptions::FPRoundingModeKind` and
`llvm::fp::RoundingMode` do not contain the value for IEEE-754 rounding
direction `roundTiesToAway`, although it is supported natively on
some targets.
This change defines all the rounding mode type via one `llvm::RoundingMode`,
which also contains rounding mode for IEEE rounding direction `roundTiesToAway`.
Differential Revision: https://reviews.llvm.org/D77379
Implemented codegen for the iterator expression in the depend clauses.
Iterator construct is emitted the following way:
iterator(cnt1, cnt2, ...), in : <dep>
<TotalNumDeps> = <cnt1_size> * <cnt2_size> * ...;
kmp_depend_t deps[<TotalNumDeps>];
deps_counter = 0;
for (cnt1) {
for (cnt2) {
...
deps[deps_counter].base_addr = &<dep>;
deps[deps_counter].size = sizeof(<dep>);
deps[deps_counter].flags = in;
deps_counter += 1;
...
}
}
For depobj construct the codegen is very similar, but the memory is
allocated dynamically and added extra first item reserved for internal use.
This is a cleanup and normalization patch that also enables reuse with
Flang later on. A follow up will clean up and move the directive ->
clauses mapping.
Reviewed By: fghanim
Differential Revision: https://reviews.llvm.org/D77112
See rational here: https://reviews.llvm.org/D76173#1922916
Time to compile Attr.h in isolation goes from 2.6s to 1.8s.
Original patch by Johannes, plus some additions from Reid to fix some
clang tooling targets.
Effect on transitive includes is marginal, though:
$ diff -u <(sort thedeps-before.txt) <(sort thedeps-after.txt) \
| grep '^[-+] ' | sort | uniq -c | sort -nr
104 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/AST/OpenMPClause.h
87 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Frontend/OpenMP/OMPContext.h
19 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/ADT/SmallSet.h
19 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/ADT/SetVector.h
14 - /usr/include/c++/9/set
...
Differential Revision: https://reviews.llvm.org/D76184
This is a cleanup and normalization patch that also enables reuse with
Flang later on. A follow up will clean up and move the directive ->
clauses mapping.
Differential Revision: https://reviews.llvm.org/D77112
This API is used by LLDB to attach owning module information to
Declarations deserialized from DWARF.
Differential Revision: https://reviews.llvm.org/D75561
Previously we would emit a PCH with errors, but fail the overall
compilation. If run using the driver, that would result in removing the
just-produced PCH. Instead, we should have the compilation result match
whether we were able to emit the PCH.
Differential Revision: https://reviews.llvm.org/D77159
rdar://61110294
Summary:
Added basic representation and parsing/sema handling of array-shaping
operations. Array shaping expression is an expression of form ([s0]..[sn])base,
where s0, ..., sn must be a positive integer, base - a pointer. This
expression is a kind of cast operation that converts pointer expression
into an array-like kind of expression.
Reviewers: rjmccall, rsmith, jdoerfert
Subscribers: guansong, arphaman, cfe-commits, caomhin, kkwli0
Tags: #clang
Differential Revision: https://reviews.llvm.org/D74144
Normally clang avoids creating expressions when it encounters semantic
errors, even if the parser knows which expression to produce.
This works well for the compiler. However, this is not ideal for
source-level tools that have to deal with broken code, e.g. clangd is
not able to provide navigation features even for names that compiler
knows how to resolve.
The new RecoveryExpr aims to capture the minimal set of information
useful for the tools that need to deal with incorrect code:
source range of the expression being dropped,
subexpressions of the expression.
We aim to make constructing RecoveryExprs as simple as possible to
ensure writing code to avoid dropping expressions is easy.
Producing RecoveryExprs can result in new code paths being taken in the
frontend. In particular, clang can produce some new diagnostics now and
we aim to suppress bogus ones based on Expr::containsErrors.
We deliberately produce RecoveryExprs only in the parser for now to
minimize the code affected by this patch. Producing RecoveryExprs in
Sema potentially allows to preserve more information (e.g. type of an
expression), but also results in more code being affected. E.g.
SFINAE checks will have to take presence of RecoveryExprs into account.
Initial implementation only works in C++ mode, as it relies on compiler
postponing diagnostics on dependent expressions. C and ObjC often do not
do this, so they require more work to make sure we do not produce too
many bogus diagnostics on the new expressions.
See documentation of RecoveryExpr for more details.
original patch from Ilya
This change is based on https://reviews.llvm.org/D61722
Reviewers: sammccall, rsmith
Reviewed By: sammccall, rsmith
Tags: #clang
Differential Revision: https://reviews.llvm.org/D69330
The only subexpression that is considered an error now is TypoExpr, but
we plan to add expressions with errors to improve editor tooling on broken
code. We intend to use the same mechanism to guard against spurious
diagnostics on those as well.
See the follow-up revision for an actual usage of the flag.
Original patch from Ilya.
Reviewers: sammccall
Reviewed By: sammccall
Tags: #clang
Differential Revision: https://reviews.llvm.org/D65591
Module.h takes 86ms to parse, mostly parsing the class itself. Avoid it
if possible. ASTContext.h depends on ExternalASTSource.h.
A few NFC changes were needed to make this possible:
- Move ASTSourceDescriptor to Module.h. This needs Module to be
complete, and seems more related to modules and AST files than
external AST sources.
- Move "import complete" bit from Module* pointer int pair to
NextLocalImport pointer. Required because PointerIntPair<Module*,...>
requires Module to be complete, and now it may not be.
Reviewed By: aaron.ballman, hans
Differential Revision: https://reviews.llvm.org/D75784
a dependent context.
This matches the GCC behavior.
We track the enclosing template depth when determining whether a
statement expression is within a dependent context; there doesn't appear
to be any other reliable way to determine this.
We previously assumed they were neither value- nor
instantiation-dependent under any circumstances, which would lead to
crashes and other misbehavior.
Fix a bug in IRGen where it wasn't destructing compound literals in C
that are ObjC pointer arrays or non-trivial structs. Also diagnose jumps
that enter or exit the lifetime of the compound literals.
rdar://problem/51867864
Differential Revision: https://reviews.llvm.org/D64464
isSameEntity was missing constraints checking, causing constrained overloads
to not travel well accross serialization. (bug #45115)
Add constraints checking to isSameEntity.
As per comment on https://reviews.llvm.org/D72860, it is suggested to
revert this change in the meantime, since it has introduced regression.
This reverts commit 83f4c3af02.
Summary:
This changes introduces an enum to represent dependencies as a bitmask
and extract common patterns from code that computes dependency bits into
helper functions.
Reviewers: rsmith, martong, shafik, ilya-biryukov, hokein
Subscribers: hokein, sammccall, Mordante, riccibruno, merge_guards_bot, rnkovacs, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71920
This swaps out the OpenMPDefaultClauseKind enum with a
llvm::omp::DefaultKind enum which is stored in OMPConstants.h.
This should not change any functionality.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D74513
This patch implements an almost complete handling of OpenMP
contexts/traits such that we can reuse most of the logic in Flang
through the OMPContext.{h,cpp} in llvm/Frontend/OpenMP.
All but construct SIMD specifiers, e.g., inbranch, and the device ISA
selector are define in `llvm/lib/Frontend/OpenMP/OMPKinds.def`. From
these definitions we generate the enum classes `TraitSet`,
`TraitSelector`, and `TraitProperty` as well as conversion and helper
functions in `llvm/lib/Frontend/OpenMP/OMPContext.{h,cpp}`.
The above enum classes are used in the parser, sema, and the AST
attribute. The latter is not a collection of multiple primitive variant
arguments that contain encodings via numbers and strings but instead a
tree that mirrors the `match` clause (see `struct OpenMPTraitInfo`).
The changes to the parser make it more forgiving when wrong syntax is
read and they also resulted in more specialized diagnostics. The tests
are updated and the core issues are detected as before. Here and
elsewhere this patch tries to be generic, thus we do not distinguish
what selector set, selector, or property is parsed except if they do
behave exceptionally, as for example `user={condition(EXPR)}` does.
The sema logic changed in two ways: First, the OMPDeclareVariantAttr
representation changed, as mentioned above, and the sema was adjusted to
work with the new `OpenMPTraitInfo`. Second, the matching and scoring
logic moved into `OMPContext.{h,cpp}`. It is implemented on a flat
representation of the `match` clause that is not tied to clang.
`OpenMPTraitInfo` provides a method to generate this flat structure (see
`struct VariantMatchInfo`) by computing integer score values and boolean
user conditions from the `clang::Expr` we keep for them.
The OpenMP context is now an explicit object (see `struct OMPContext`).
This is in anticipation of construct traits that need to be tracked. The
OpenMP context, as well as the `VariantMatchInfo`, are basically made up
of a set of active or respectively required traits, e.g., 'host', and an
ordered container of constructs which allows duplication. Matching and
scoring is kept as generic as possible to allow easy extension in the
future.
---
Test changes:
The messages checked in `OpenMP/declare_variant_messages.{c,cpp}` have
been auto generated to match the new warnings and notes of the parser.
The "subset" checks were reversed causing the wrong version to be
picked. The tests have been adjusted to correct this.
We do not print scores if the user did not provide one.
We print spaces to make lists in the `match` clause more legible.
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: merge_guards_bot, rampitec, mgorny, hiraditya, aheejin, fedor.sergeev, simoncook, bollu, guansong, dexonsmith, jfb, s.egerton, llvm-commits, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71830
According to OpenMP 5.0, cancel and cancellation point constructs are
supported in taskloop directive. Added support for cancellation in
taskloop, master taskloop and parallel master taskloop.
This is a longstanding bug that seems to have been hidden by
a combination of (1) the normal flow being to deserialize the
interface before deserializing its parameter and (2) a precise
ordering of work that was apparently recently disturbed,
perhaps by my abstract-serialization work or Bruno's ObjC
module merging work.
Fixes rdar://59153545.
directive.
According to OpenMP 5.0, The atomic_default_mem_order clause specifies the default memory ordering behavior for atomic constructs that must be provided by an implementation. If the default memory ordering is specified as seq_cst, all atomic constructs on which memory-order-clause is not specified behave as if the seq_cst clause appears. If the default memory ordering is specified as relaxed, all atomic constructs on which memory-order-clause is not specified behave as if the relaxed clause appears.
If the default memory ordering is specified as acq_rel, atomic constructs on which memory-order-clause is not specified behave as if the release clause appears if the atomic write or atomic update operation is specified, as if the acquire clause appears if the atomic read operation is specified, and as if the acq_rel clause appears if the atomic captured update operation is specified.
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
This patch implements P1141R2 "Yet another approach for constrained declarations".
General strategy for this patch was:
- Expand AutoType to include optional type-constraint, reflecting the wording and easing the integration of constraints.
- Replace autos in parameter type specifiers with invented parameters in GetTypeSpecTypeForDeclarator, using the same logic
previously used for generic lambdas, now unified with abbreviated templates, by:
- Tracking the template parameter lists in the Declarator object
- Tracking the template parameter depth before parsing function declarators (at which point we can match template
parameters against scope specifiers to know if we have an explicit template parameter list to append invented parameters
to or not).
- When encountering an AutoType in a parameter context we check a stack of InventedTemplateParameterInfo structures that
contain the info required to create and accumulate invented template parameters (fields that were already present in
LambdaScopeInfo, which now inherits from this class and is looked up when an auto is encountered in a lambda context).
Resubmit after fixing MSAN failures caused by incomplete initialization of AutoTypeLocs in TypeSpecLocFiller.
Differential Revision: https://reviews.llvm.org/D65042
There's going to be a lot of common code between RecordDecl and
CXXRecordDecl, factor out some of the logic in preparation for
adding the RecordDecl side.
This patch implements P1141R2 "Yet another approach for constrained declarations".
General strategy for this patch was:
- Expand AutoType to include optional type-constraint, reflecting the wording and easing the integration of constraints.
- Replace autos in parameter type specifiers with invented parameters in GetTypeSpecTypeForDeclarator, using the same logic
previously used for generic lambdas, now unified with abbreviated templates, by:
- Tracking the template parameter lists in the Declarator object
- Tracking the template parameter depth before parsing function declarators (at which point we can match template
parameters against scope specifiers to know if we have an explicit template parameter list to append invented parameters
to or not).
- When encountering an AutoType in a parameter context we check a stack of InventedTemplateParameterInfo structures that
contain the info required to create and accumulate invented template parameters (fields that were already present in
LambdaScopeInfo, which now inherits from this class and is looked up when an auto is encountered in a lambda context).
Resubmit after incorrect check in NonTypeTemplateParmDecl broke lldb.
Differential Revision: https://reviews.llvm.org/D65042
This patch implements P1141R2 "Yet another approach for constrained declarations".
General strategy for this patch was:
- Expand AutoType to include optional type-constraint, reflecting the wording and easing the integration of constraints.
- Replace autos in parameter type specifiers with invented parameters in GetTypeSpecTypeForDeclarator, using the same logic
previously used for generic lambdas, now unified with abbreviated templates, by:
- Tracking the template parameter lists in the Declarator object
- Tracking the template parameter depth before parsing function declarators (at which point we can match template
parameters against scope specifiers to know if we have an explicit template parameter list to append invented parameters
to or not).
- When encountering an AutoType in a parameter context we check a stack of InventedTemplateParameterInfo structures that
contain the info required to create and accumulate invented template parameters (fields that were already present in
LambdaScopeInfo, which now inherits from this class and is looked up when an auto is encountered in a lambda context).
Differential Revision: https://reviews.llvm.org/D65042
Implement support for C++2a requires-expressions.
Re-commit after compilation failure on some platforms due to alignment issues with PointerIntPair.
Differential Revision: https://reviews.llvm.org/D50360
Partially reverts 0a2be46cfd as it turned
out to cause redundant module rebuilds in multi-process incremental builds.
When a module was getting out of date, all compilation processes started at the
same time were marking it as `ToBuild`. So each process was building the same
module instead of checking if it was built by someone else and using that
result. In addition to the work duplication, contention on the same .pcm file
wasn't making builds faster.
Note that for a single-process build this change would cause redundant module
reads and validations. But reading a module is faster than building it and
multi-process builds are more common than single-process. So I'm willing to
make such a trade-off.
rdar://problem/54395127
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D72860
Add support for type-constraints in template type parameters.
Also add support for template type parameters as pack expansions (where the type constraint can now contain an unexpanded parameter pack).
Differential Revision: https://reviews.llvm.org/D44352
Allow to build PCH's (with -building-pch-with-obj and the extra .o file)
with -fmodules-codegen -fmodules-debuginfo to allow emitting shared code
into the extra .o file, similarly to how it works with modules. A bit of
a misnomer, but the underlying functionality is the same. This saves up
to 20% of build time here.
Differential Revision: https://reviews.llvm.org/D69778
If a header contains 'extern template', then the template should be provided
somewhere by an explicit instantiation, so it is not necessary to generate
a copy. Worse, this can lead to an unresolved symbol, because the codegen's
object file will not actually contain functions from such a template
because of the GVA_AvailableExternally, but the object file for the explicit
instantiation will not contain them either because it will be blocked
by the information provided by the module.
Differential Revision: https://reviews.llvm.org/D69779
Function trailing requires clauses now parsed, supported in overload resolution and when calling, referencing and taking the address of functions or function templates.
Differential Revision: https://reviews.llvm.org/D43357
This removes the OpenMPProcBindClauseKind enum in favor of
llvm::omp::ProcBindKind which lives in OpenMPConstants.h and was
introduced in D70109.
No change in behavior is expected.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D70289
Simon Pilgrim