This patch simplifies pattern (xxswap (vec-op (xxswap a) (xxswap b)))
into (vec-op a b) if vec-op is lane-insensitive. The motivating case
is ScalarToVector-VecOp-ExtractElement sequence on LE, but the
peephole itself is not related to endianness, so BE may also benefit
from this.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D97658
This pull request implements patterns to exploit the load rightmost vector
element instructions for loading element 0 on little endian PowerPC subtargets
into v8i16 and v16i8 vector registers for i16 and i8 data types.
Differential Revision: https://reviews.llvm.org/D94816#inline-921403
Add support for the TLS general dynamic access model to assembly
files on AIX 64-bit.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D98078
Since P8 is the oldest machine supported by MASSV pass,
_massv place holder is removed and the oldest version of
MASSV functions is assumed. If the P9 vector specific is
detected in the compilation process, the P8 prefix will
be updated to P9.
Differential Revision: https://reviews.llvm.org/D98064
Adds support for the TLS general dynamic access model to
assembly files on AIX 32-bit.
To generate the correct code sequence when accessing a TLS variable
`v`, we first create two TOC entry nodes, one for the variable offset, one
for the region handle. These nodes are followed by a `PPCISD::TLSGD_AIX`
node (new node introduced by this patch).
The `PPCISD::TLSGD_AIX` node (`TLSGDAIX` pseudo instruction) is
expanded to 2 copies (to put the variable offset and region handle in
the right registers) and a call to `__tls_get_addr`.
This patch also changes the way TC entries are generated in asm files.
If the generated TC entry is for the region handle of a TLS variable,
we add the `@m` relocation and the `.` prefix to the entry name.
For example:
```
L..C0:
.tc .v[TC],v[TL]@m -> region handle
L..C1:
.tc v[TC],v[TL] -> variable offset
```
Reviewed By: nemanjai, sfertile
Differential Revision: https://reviews.llvm.org/D97948
This changes the target data layout to make stack align to 16 bytes
on Power10. Before this change, stack was being aligned to 32 bytes.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D96265
I noticed that we were not folding expressions like this:
icmp ult (constexpr), null
in https://llvm.org/PR49355, so we end up with extremely large
icmp instructions as the constant expressions pile up on each other.
There is no potential to mis-fold an unsigned boundary condition
with a zero/null, so this is just falling through a crack in the
pattern matching.
The more general case of comparisons of non-zero constants and
constexpr are more tricky and may require the datalayout to know
how to cast to different types, etc. Negative tests verify that
we are only changing a subset of potential patterns.
Differential Revision: https://reviews.llvm.org/D98150
Patch adds support for passing vector call operands to variadic
functions. Arguments which are fixed shadow GPRs and stack space even
when they are passed in vector registers, while arguments passed through
ellipses are passed in properly aligned GPRs if available and on the
stack once all GPR arguments registers are consumed.
Differential Revision: https://reviews.llvm.org/D97956
This patch adds support for the default AltiVec ABI for AIX.
Vector registers 20 through 31 are marked as reserved and cannot
be used in the default ABI. This patch adds handling for this case
and also remove the default AltiVec ABI errors.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D96351
:: (store 1 + 4, addrspace 1)
->
:: (store 1 into undef + 4, addrspace 1)
An offset without a base isn't terribly useful but it's convenient to update
the offset without checking the value. For example, when breaking apart
stores into smaller units
Differential Revision: https://reviews.llvm.org/D97812
Patch adds support for passing vector arguments to variadic functions.
Arguments which are fixed shadow GPRs and stack space even when they are
passed in vector registers, while arguments passed through ellipses are
passed in(properly aligned GPRs if available and on the stack once all
GPR arguments registers are consumed.
Differential Revision: https://reviews.llvm.org/D97485
VirtRegRewriter may sometimes fail to correctly apply the kill flag where necessary,
which causes unecessary code gen on PowerPC. This patch fixes the way masks for
defined lanes are computed and the way mask for used lanes is computed.
Contact albion.fung@ibm.com instead of author for problems related to this commit.
Differential Revision: https://reviews.llvm.org/D92405
This patch allows generating TLS variables in assembly files on AIX.
Initialized and external uninitialized variables are generated with the
.csect pseudo-op and local uninitialized variables are generated with
the .comm/.lcomm pseudo-ops. The patch also adds a check to
explicitly say that TLS is not yet supported on AIX.
Reviewed by: daltenty, jasonliu, lei, nemanjai, sfertile
Originally patched by: bsaleil
Commandeered by: NeHuang
Differential Revision: https://reviews.llvm.org/D96184
This seems to be more of a Clang thing rather than a generic LLVM thing,
so this moves it out of LLVM pipelines and as Clang extension hooks into
LLVM pipelines.
Move the post-inline EEInstrumentation out of the backend pipeline and
into a late pass, similar to other sanitizer passes. It doesn't fit
into the codegen pipeline.
Also fix up EntryExitInstrumentation not running at -O0 under the new
PM. PR49143
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D97608
The code previously used two BUILD_PAIRs to concatenate the two UMULO
results with 0s in the lower bits to match original VT. Then it created
an ADD and a UADDO with the original bit width. Each of those operations
need to be expanded since they have illegal types.
Since we put 0s in the lower bits before the ADD, the lower half of the
ADD result will be 0. So the lower half of the UADDO result is
solely determined by the other operand. Since the UADDO need to
be split in half, we don't really needd an operation for the lower
bits. Unfortunately, we don't see that in type legalization and end up
creating something more complicated and DAG combine or
lowering aren't always able to recover it.
This patch directly generates the narrower ADD and UADDO to avoid
needing to legalize them. Now only the MUL is done on the original
type.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D97440
Under -O3 and -Ofast, the MASSV conversion prevents the sqrt call to be inlined.
Inline sqrt is faster than MASSV call on leppc.
Differential Revision: https://reviews.llvm.org/D97487
If a global object is listed in `@llvm.used`, place it in a unique section with
the `SHF_GNU_RETAIN` flag. The section is a GC root under `ld --gc-sections`
with LLD>=13 or GNU ld>=2.36.
For front ends which do not expect to see multiple sections of the same name,
consider emitting `@llvm.compiler.used` instead of `@llvm.used`.
SHF_GNU_RETAIN is restricted to ELFOSABI_GNU and ELFOSABI_FREEBSD in
binutils. We don't do the restriction - see the rationale in D95749.
The integrated assembler has supported SHF_GNU_RETAIN since D95730.
GNU as>=2.36 supports section flag 'R'.
We don't need to worry about GNU ld support because older GNU ld just ignores
the unknown SHF_GNU_RETAIN.
With this change, `__attribute__((retain))` functions/variables emitted
by clang will get the SHF_GNU_RETAIN flag.
Differential Revision: https://reviews.llvm.org/D97448
This is for XCOFF DWARF support.
Seems when DWARF debug is enable, symbol 0 has special usage
for AIX binder. At least, symbol 0 can not be the .text
section. Otherwise, we get some binding time error.
Add correct C_FILE symbol at index 0 here to make AIX binder
work.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D97117
This patch generates the vinsw, vinsd, vinsblx, vinshlx, vinswlx, vinsdlx,
vinsbrx, vinshrx, vinswrx and vinsdrx instructions for vector insertion on P10.
Differential Revision: https://reviews.llvm.org/D94454
Added -mrop-protection for Power PC to turn on codegen that provides some
protection from ROP attacks.
The option is off by default and can be turned on for Power 8, Power 9 and
Power 10.
This patch is for the option only. The feature will be implemented by a later
patch.
Reviewed By: amyk
Differential Revision: https://reviews.llvm.org/D96512
Summary:
Currently Shrinkwrap is not enabled on AIX.
This patch enables shrink wrap on 32 and 64 bit AIX, and 64 bit ELF.
Reviewed By: sfertile, nemanjai
Differential Revision: https://reviews.llvm.org/D95094
Do not defer to the base class when the register constraint is a
physical fpr. The base class will select SPILLTOVSRRC as the register
class and register allocation will fail on subtargets without VSX
registers.
Differential Revision: https://reviews.llvm.org/D91629
If we wait until the type is legalized, we'll lose information
about the orginal type and need to use larger magic constants.
This gets especially bad on RISCV64 where i64 is the only legal
type.
I've limited this to simple scalar types so it only works for
i8/i16/i32 which are most likely to occur. For more odd types
we might want to do a small promotion to a type where MULH is legal
instead.
Unfortunately, this does prevent some urem/srem+seteq matching since
that still require legal types.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D96210
As of commit 284f2bffc9, the DAG Combiner gets rid of the masking of the
input to this node if the mask only keeps the bottom 16 bits. This is because
the underlying library function does not use the high order bits. However, on
PowerPC's ELFv2 ABI, it is the caller that is responsible for clearing the bits
from the register. Therefore, the library implementation of __gnu_h2f_ieee will
return an incorrect result if the bits aren't cleared.
This combine is desired for ARM (and possibly other targets) so this patch adds
a query to Target Lowering to check if this zeroing needs to be kept.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=49092
Differential revision: https://reviews.llvm.org/D96283
NOTE: This patch was originally written by Anil Mahmud. His code has been
rebased but otherwise left mostly unchanged.
A new instructon on Power 10 allows for the materialization of 34 bit
immediate values. This patch allows the compiler to take advantage of
the new instruction in this situation.
Reviewed By: amyk
Differential Revision: https://reviews.llvm.org/D92879
Some cases may be transformed into 32 bit splats before hitting the boolean statement, which may cause incorrect behaviour and provide XXSPLTI32DX with the incorrect values of splat. The condition was reversed so that the shortcut prevents this problem.
Differential Revision: https://reviews.llvm.org/D95634
If the APInt returned by BuildVectorSDNode::isConstantSplat() is narrower than
64 bits, the result produced by XXSPLTI32DX is incorrect. The result returned
by the function appears to be incorrect and we'll investigate/fix it in a
follow-up commit. However, since this causes miscompiles, we must
temporarily disable emitting this instruction for such values.
This intrinsic is supposed to have the permute control vector complemented on
little endian systems (as the ABI specifies and GCC implements). With the
current code gen, the result vector is byte-reversed.
Differential revision: https://reviews.llvm.org/D95004
Reassociating some patterns to generate more fma instructions to
reduce register pressure.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D92071
PowerPC has its custom scheduler heuristic. It calls parent classes'
tryCandidate in override version, but the function returns void, so this
way doesn't actually help. This patch duplicates code from base scheduler
into PPC machine scheduler class, which does what we wanted.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D94464
Exploits the instruction xxsplti32dx.
It can be used to materialize any 64 bit scalar/vector splat by using two instances, one for the upper 32 bits and the other for the lower 32 bits. It should not materialize the cases which can be materialized by using the instruction xxspltidp.
Differential Revision: https://https://reviews.llvm.org/D90173
When performing peephole optimization to simplify the code, after removing
passed FPSP/XSRSP instruction we will set any uses of that FRSP/XSRSP to the
source of the FRSP/XSRSP.
We are finding the machine instruction using virtual register holding FRSP/XSRSP
results by searching all following instructions and encountering an issue
that the first use of the virtual register is a debug MI causing:
1. virtual register in the debug MI removed unexpectedly.
2. virtual register used in non-debug MI not replaced with the source of
FRSP/XSRSP. which stays in a undef status.
This patch fix the issue by only searching non-debug machine instruction using
virtual register holding FRSP/XSRSP results when the vr only has one non debug
usage.
Differential Revisien: https://reviews.llvm.org/D94711
Reviewed by: nemanjai
As of 8dacca943a, we sign extend the atomic loaded
operand for signed subword comparisons. However, the assumption that the other
operand is correctly sign extended doesn't always hold. This patch sign extends
the other operand if it needs to be sign extended.
This is a second fix for https://bugs.llvm.org/show_bug.cgi?id=30451
Differential revision: https://reviews.llvm.org/D94058
A bug in the system assembler can assemble the xxspltd extended
menemonic into the wrong instruction (extracting the wrong element).
Emit the full xxpermdi with all operands to work around the problem.
Differential Revision: https://reviews.llvm.org/D94419
Reassociating some patterns to generate more fma instructions to
reduce register pressure.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D92071
This patch promotes result integer type of FP_TO_XINT in expanding.
So crash in conversion from ppc_fp128 to i1 will be fixed.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92473
As part of the effort to improve AIX support, regression test coverage
misses quite a lot for AIX subtarget. This patch adds AIX triple to
those don't need extra change, and we can cover more cases in following
commits.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D94159
This is a follow-up fix to commit 03c8d6a0c4.
Seems like we now end up with NeedInvert being set in the result
from LegalizeSetCCCondCode more often than in the past, so we
need to handle NeedInvert when expanding BR_CC.
Not sure how to deal with the "Tmp4.getNode()" case properly,
but current assumption is that that code path isn't impacted
by the changes in 03c8d6a0c4 so we can simply move
the old assert into the if-branch and only handle NeedInvert in the
else-branch.
I think that the test case added here, for PowerPC, might have
failed also before commit 03c8d6a0c4. But we started
to hit the assert more often downstream when having merged that
commit.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94762
If SETO/SETUO aren't legal, they'll be expanded and we'll end up
with 3 comparisons.
SETONE is equivalent to (SETOGT || SETOLT)
so if one of those operations is supported use that expansion. We
don't need both since we can commute the operands to make the other.
SETUEQ can be implemented with !(SETOGT || SETOLT) or (SETULE && SETUGE).
I've only implemented the first because it didn't look like most of the
affected targets had legal SETULE/SETUGE.
Reviewed By: frasercrmck, tlively, nemanjai
Differential Revision: https://reviews.llvm.org/D94450
PowerPC cores like e200z759n3 [1] using an efpu2 only support single precision
hardware floating point instructions. The single precision instructions efs*
and evfs* are identical to the spe float instructions while efd* and evfd*
instructions trigger a not implemented exception.
This patch introduces a new command line option -mefpu2 which leads to
single-hardware / double-software code generation.
[1] Core reference:
https://www.nxp.com/files-static/32bit/doc/ref_manual/e200z759CRM.pdf
Differential revision: https://reviews.llvm.org/D92935
Memory operands store a base alignment that does not factor in
the effect of the offset on the alignment.
Previously the printing code only printed the base alignment if
it was different than the size. If there is an offset, the reader
would need to figure out the effective alignment themselves. This
has confused me before and someone else was recently confused on
IRC.
This patch prints the possibly offset adjusted alignment if it is
different than the size. And prints the base alignment if it is
different than the alignment. The MIR parser has been updated to
read basealign in addition to align.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D94344
This patch finishes addressing unused prefixes under CodeGen: 2
remaining tests fixed, and then undo-ing the lit.local.cfg changes under
various subdirs and moving the policy under CodeGen.
Differential Revision: https://reviews.llvm.org/D94430
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
In addition, constants materialized due to PHI instructions are
not assigned a debug location immediately; instead, when the
local value map is flushed, if the first local value instruction
has no debug location, it is given the same location as the
first non-local-value-map instruction. This prevents PHIs
from introducing unattributed instructions, which would either
be implicitly attributed to the location for the preceding IR
instruction, or given line 0 if they are at the beginning of
a machine basic block. Neither of those consequences is good
for debugging.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
This reapplies commits cf1c774d and dc35368c, and adds the
modification to PHI handling, which should avoid problems
with debugging under gdb.
Differential Revision: https://reviews.llvm.org/D91734
There were a number of tests needing updates for D91734, and I added a
bunch of LABEL directives to help track down where those had to go.
These directives are an improvement independent of the functional
patch, so I'm committing them as their own separate patch.
Update CodeGen regression tests with marker at first line telling it's
auto-generated by the script, under PowerPC directory. For some reason,
these tests are generated but manually written, which makes things
unclear when someone's change affecting them.
However, some tests only show simple change after re-generated, like
extra blank lines, disappearing '.localentry', etc. Besides, some tests
are generated but added checks for debug output. This commit doesn't try
updating them.
The new Power10 instruction vsrq was being given the wrong shift vector.
The original code assumed that the shift would be found in bits 121 to 127.
This is not correct. The shift is found in bits 57 to 63.
This can be fixed by swaping the first and second double words.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D94113
In some case, the RC may have 0 allocatable reg.
eg: VRSAVERC in PowerPC, which has only 1 reg, but it is also reserved.
The curreent implementation will keep calling the computePSetLimit because
getRegPressureSetLimit assume computePSetLimit will return a non-zero value.
The fix simply early return the value from TableGen for such special case.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D92907
Current update_llc_test_checks.py cannot generate checks for AIX
(powerpc64-ibm-aix-xcoff) properly. Assembly generated is little bit
different from Linux. So I use begin function comment here to capture
function name.
Reviewed By: MaskRay, steven.zhang
Differential Revision: https://reviews.llvm.org/D93676
In `PPCInstrInfo::optimizeCompareInstr` we seek opportunities to fold `cmp(d|w)` and `subf` as an `subf.`. However, if `subf.` gets overflow, `cr0` can't reflect the correct order, violating the semantics of `cmp(d|w)`.
Fixed https://bugs.llvm.org/show_bug.cgi?id=47830.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D90156
Once the default for SimplifyCFG flips, we can no longer pass nullptr
instead of DomTree to SimplifyCFG, so we need to propagate it here.
We don't strictly need to actually preserve DomTree in DwarfEHPrepare,
but we might as well do it, since it's trivial.
TargetMachine::shouldAssumeDSOLocal currently implies dso_local for such definitions.
Since clang -fno-pic add the dso_local specifier, we don't need to special case.
TargetMachine::shouldAssumeDSOLocal currently implies dso_local for such definitions.
Adding explicit dso_local makes these tests align with the clang -fpic behavior
and allow the removal of the TargetMachine::shouldAssumeDSOLocal special case.
Rewrite preemption.ll to dsolocal-static.ll and dsolocal-pic.ll, and add
"PIC Level" metadata.
In `PPCTargetLowering::DAGCombineTruncBoolExt`, when checking if it's correct to perform the transformation for non-sign comparison, as the comment says
```
// This is neither a signed nor an unsigned comparison, just make sure
// that the high bits are equal.
```
Origin check
```
if (Op1Known.Zero != Op2Known.Zero || Op1Known.One != Op2Known.One)
return SDValue();
```
is not strong enough. For example,
```
Op1Known = 111x000x;
Op2Known = 111x000x;
```
Bit 4, besides bit 0, is still unknown and affects the final result.
This patch fixes https://bugs.llvm.org/show_bug.cgi?id=48388.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D93092
We will emit these permuted nodes on all VSX little endian subtargets
but don't have the patterns available to match them on subtargets
that don't have direct moves.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=47916
On subtargets prior to Power9, conversions to/from half precision
are lowered to libcalls. This makes loops containing such operations
invalid candidates for HW loops.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=48519
If any PHI nodes in loop exit blocks have incoming values from the
loop that are accesses of TLS variables with local dynamic or general
dynamic TLS model, the address will be computed inside the loop. Since
this includes a call to __tls_get_addr, this will in turn cause the
CTR loops verifier to complain.
Disable CTR loops in such cases.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=48527
The MIRParser expects unnamed stack entries to have empty names ('').
In case of unnamed alloca instructions, the MIRPrinter would output
'<unnamed alloca>', which caused the MIRParser to reject the generated
code.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D93685
Current approach doesn't work well in cases when multiple paths are predicted to be "cold". By "cold" paths I mean those containing "unreachable" instruction, call marked with 'cold' attribute and 'unwind' handler of 'invoke' instruction. The issue is that heuristics are applied one by one until the first match and essentially ignores relative hotness/coldness
of other paths.
New approach unifies processing of "cold" paths by assigning predefined absolute weight to each block estimated to be "cold". Then we propagate these weights up/down IR similarly to existing approach. And finally set up edge probabilities based on estimated block weights.
One important difference is how we propagate weight up. Existing approach propagates the same weight to all blocks that are post-dominated by a block with some "known" weight. This is useless at least because it always gives 50\50 distribution which is assumed by default anyway. Worse, it causes the algorithm to skip further heuristics and can miss setting more accurate probability. New algorithm propagates the weight up only to the blocks that dominates and post-dominated by a block with some "known" weight. In other words, those blocks that are either always executed or not executed together.
In addition new approach processes loops in an uniform way as well. Essentially loop exit edges are estimated as "cold" paths relative to back edges and should be considered uniformly with other coldness/hotness markers.
Reviewed By: yrouban
Differential Revision: https://reviews.llvm.org/D79485
Using the store rightmost vector element instructions to do vector
element extraction and store. The rightmost vector element on little
endian is the zeroth vector element, with these patterns that element
can be extracted and stored in one instruction for all vector types.
Differential Revision: https://reviews.llvm.org/D89195
On subtargets that have a red zone, we will copy the stack pointer to the base
pointer in the prologue prior to updating the stack pointer. There are no other
updates to the base pointer after that. This suggests that we should be able to
restore the stack pointer from the base pointer rather than loading it from the
back chain or adding the frame size back to either the stack pointer or the
frame pointer.
This came about because functions that call setjmp need to restore the SP from
the FP because the back chain might have been clobbered
(see https://reviews.llvm.org/D92906). However, if the stack is realigned, the
restored SP might be incorrect (which is what caused the failures in the two
ASan test cases).
This patch was tested quite extensivelly both with sanitizer runtimes and
general code.
Differential revision: https://reviews.llvm.org/D93327
Summary: Some constants can be handled with less instructions than our current results. And it seems our original approach is not very easy to extend. Therefore this patch proposes to materialize all 64-bit constants by enumerated patterns.
I traversed almost all constants to verified the functionality of these pattens. A traversed comparison of the number of instructions used by the original method and the new method has also been completed, where no degradation was caused by this patch. This patch also passed Bootstrap test and SPEC test.
Improvements of this patch are shown in llvm/test/CodeGen/PowerPC/constants-i64.ll
Reviewed By: steven.zhang, stefanp
Differential Revision: https://reviews.llvm.org/D92089
This patch does two things:
1: fix the typo that intrinsic mfvscr should be with no readmem property
2: since VSCR is not modeled yet, add has side effect for SAT bit clobber
intrinsics/instructions.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D90807
The LD/STD likewise instruction are selected only when the alignment in
the load/store >= 4 to deal with the case that the offset might not be
known(i.e. relocations). That means we have to select the X-Form load
for %0 = load i64, i64* %arrayidx, align 2 In fact, we can still select
the D-Form load if the offset is known. So, we only query the load/store
alignment when we don't know if the offset is a multiple of 4.
Reviewed By: jji, Nemanjai
Differential Revision: https://reviews.llvm.org/D93099
Clean up a TODO, to support folding a shift of a constant by a
select of constants, on targets with different shift operand sizes.
Reviewed By: RKSimon, lebedev.ri
Differential Revision: https://reviews.llvm.org/D90349
On PPC, the vector pair instructions are independent from MMA.
This patch renames the vector pair LLVM intrinsics and Clang builtins to replace the _mma_ prefix by _vsx_ in their names.
We also move the vector pair type/intrinsic/builtin tests to their own files.
Differential Revision: https://reviews.llvm.org/D91974
X86 and AArch64 expand it as libcall inside the target. And PowerPC also
want to expand them as libcall for P8. So, propose an implement in the
legalizer to common the logic and remove the code for X86/AArch64 to
avoid the duplicate code.
Reviewed By: Craig Topper
Differential Revision: https://reviews.llvm.org/D91331
SUMMARY:
In order for the runtime on AIX to find the compact unwind section(EHInfo table),
we would need to set the following on the traceback table:
The 6th byte's longtbtable field to true to signal there is an Extended TB Table Flag.
The Extended TB Table Flag to be 0x08 to signal there is an exception handling info presents.
Emit the offset between ehinfo TC entry and TOC base after all other optional portions of traceback table.
The patch is authored by Jason Liu.
Reviewers: David Tenty, Digger Lin
Differential Revision: https://reviews.llvm.org/D92766
This patch enables the Clang type __vector_pair and its associated LLVM
intrinsics even when MMA is disabled. With this patch, the type is now controlled
by the PPC paired-vector-memops option. The builtins and intrinsics will be
renamed to drop the mma prefix in another patch.
Differential Revision: https://reviews.llvm.org/D91819
If a function happens to:
- call setjmp
- do a 16-byte stack allocation
- call a function that sets up a stack frame and longjmp's back
The stack pointer that is restores by setjmp will no longer point to a valid
back chain. According to the ABI, stack accesses in such a function are to be
frame pointer based - so it is an error (quite obviously) to restore the stack
from the back chain.
We already restore the stack from the frame pointer when there are calls to
fast_cc functions. We just need to also do that when there are calls to setjmp.
This patch simply does that.
This was pointed out by the Julia team.
Differential revision: https://reviews.llvm.org/D92906
The runtime library has two family library implementation for ppc_fp128 and fp128.
For IBM Long double(ppc_fp128), it is suffixed with 'l', i.e(sqrtl). For
IEEE Long double(fp128), it is suffixed with "ieee128" or "f128".
We miss to map several libcall for IEEE Long double.
Reviewed By: qiucf
Differential Revision: https://reviews.llvm.org/D91675
Some of the pattern matching in PPCInstrVSX.td and node lowering involving vectors assumes 64bit mode. This patch disables some of the unsafe pattern matching and lowering of BUILD_VECTOR in 32bit mode.
Reviewed By: Xiangling_L
Differential Revision: https://reviews.llvm.org/D92789
SUMMARY:
1. added a new option -xcoff-traceback-table to control whether generate traceback table for function.
2. implement the functionality of emit traceback table of a function.
Reviewers: hubert.reinterpretcast, Jason Liu
Differential Revision: https://reviews.llvm.org/D92398
Weak functions can be replaced by other functions at link time. Previously it
was assumed that no matter what the weak callee function was replaced with it
would still share the same TOC as the caller. This is no longer true as a weak
callee with a TOC setup can be replaced by another function that was compiled
with PC Relative and does not have a TOC at all.
This patch makes sure that all calls to functions defined as weak from a caller
that has a valid TOC have a nop after the call to allow a place for the linker
to restore the TOC.
Reviewed By: NeHuang
Differential Revision: https://reviews.llvm.org/D91983
Instruction darn was introduced in ISA 3.0. It means 'Deliver A Random
Number'. The immediate number L means:
- L=0, the number is 32-bit (higher 32-bits are all-zero)
- L=1, the number is 'conditioned' (processed by hardware to reduce bias)
- L=2, the number is not conditioned, directly from noise source
GCC implements them in three separate intrinsics: __builtin_darn,
__builtin_darn_32 and __builtin_darn_raw. This patch implements the
same intrinsics. And this change also addresses Bugzilla PR39800.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92465
The xxeval instruction was intorduced in Power PC in Power 10.
The instruction accepts three vector registers and an immediate.
Depending on the value of the immediate the instruction can be used
to perform certain bitwise boolean operations (and, or, xor, ...) on
the given vector registers.
This patch implements the AND and NAND patterns that can be used by
the instruction.
Reviewed By: nemanjai, #powerpc, bsaleil, NeHuang, jsji
Differential Revision: https://reviews.llvm.org/D92420
Summary: This patch added support for the intrinsics llvm.ppc.dcbfps and llvm.ppc.dcbstps.
dcbfps and dcbstps are actually extended mnemonics of dcbf.
dcbfps RA,RB ---> dcbf RA,RB,4
dcbstps RA,RB ---> dcbf RA,RB,6
Reviewed By: amyk, steven.zhang
Differential Revision: https://reviews.llvm.org/D91323
A simple SELECT is used for converting i1 to floating types on ppc32,
but in constrained cases, the chain is not handled properly. This patch
will fix that.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92365
Move fold of (sext (not i1 x)) -> (add (zext i1 x), -1) from X86 to DAGCombiner to improve codegen on other targets.
Differential Revision: https://reviews.llvm.org/D91589
When using accumulators in loops, they are passed around in PHI nodes of unprimed
accumulators, causing the generation of additional prime/unprime instructions.
This patch detects these cases and changes these PHI nodes to primed accumulator
PHI nodes. We also add IR and MIR test cases for several PHI node cases.
Differential Revision: https://reviews.llvm.org/D91391
PowerPC ISA support the input test for vector type v4f32 and v2f64.
Replace the software compare with hw test will improve the perf.
Reviewed By: ChenZheng
Differential Revision: https://reviews.llvm.org/D90914
Summary:
Not all system assembler supports `.uleb128 label2 - label1` form.
When the target do not support this form, we have to take
alternative manual calculation to get the offsets from them.
Reviewed By: hubert.reinterpretcast
Diffierential Revision: https://reviews.llvm.org/D92058
Summary:
AIX uses the existing EH infrastructure in clang and llvm.
The major differences would be
1. AIX do not have CFI instructions.
2. AIX uses a new personality routine, named __xlcxx_personality_v1.
It doesn't use the GCC personality rountine, because the
interoperability is not there yet on AIX.
3. AIX do not use eh_frame sections. Instead, it would use a eh_info
section (compat unwind section) to store the information about
personality routine and LSDA data address.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D91455
In lowering of FLT_ROUNDS_, FPSCR content will be moved into FP register
and then GPR, and then truncated into word.
For subtargets without direct move support, it will store and then load.
The load address needs adjustment (+4) only on big-endian targets. This
patch fixes it on using generic opcodes on little-endian and subtargets
with direct-move.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D91845
i1 is the native type for PowerPC if crbits is enabled. However, we need
to promote the i1 to i64 as we didn't have the pattern for i1.
Reviewed By: Qiu Chao Fang
Differential Revision: https://reviews.llvm.org/D92067
This reverts commit cf1c774d6a.
This change caused several regressions in the gdb test suite - at least
a sample of which was due to line zero instructions making breakpoints
un-lined. I think they're worth investigating/understanding more (&
possibly addressing) before moving forward with this change.
Revert "[FastISel] NFC: Clean up unnecessary bookkeeping"
This reverts commit 3fd39d3694.
Revert "[FastISel] NFC: Remove obsolete -fast-isel-sink-local-values option"
This reverts commit a474657e30.
Revert "Remove static function unused after cf1c774."
This reverts commit dc35368ccf.
Revert "[lldb] Fix TestThreadStepOut.py after "Flush local value map on every instruction""
This reverts commit 53a14a47ee.
Move the X86 VSELECT->UADDSAT fold to DAGCombiner - there's nothing target specific about these folds.
The SSE42 test diffs are relatively benign - its avoiding an extra constant load in exchange for an extra xor operation - there are extra register moves, which is annoying as all those operations should commute them away.
Differential Revision: https://reviews.llvm.org/D91876
For now, we will hardcode the result as 0.0 if the input is denormal or 0. That will
have the impact the precision. As the fsqrt added belong to the cold path of the
cmp+branch, it won't impact the performance for normal inputs for PowerPC, but improve
the precision if the input is denormal.
Reviewed By: Spatel
Differential Revision: https://reviews.llvm.org/D80974
This patch enables passing non variadic vector type parameters on the caller and callee side and vector return on AIX that are passed in vector registers only.
So far, support is enabled for only the AIX extended Altivec ABI Calling convention.
Reviewed By: sfertile, DiggerLin
Differential Revision: https://reviews.llvm.org/D86476
We currently don't match this which limits the effectiveness of D91120 until
InstCombine starts canonicalizing to llvm.abs. This should be easy to remove
if/when we remove the SPF_ABS handling.
Differential Revision: https://reviews.llvm.org/D92118
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
Differential Revision: https://reviews.llvm.org/D91734
During reviewing https://reviews.llvm.org/D84419, @efriedma mentioned the gap between realigned stack pointer and origin stack pointer should be probed too whatever the alignment is. This patch fixes the issue for PPC64.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D88078
PowerPC has instruction ftsqrt/xstsqrtdp etc to do the input test for software square root.
LLVM now tests it with smallest normalized value using abs + setcc. We should add hook to
target that has test instructions.
Reviewed By: Spatel, Chen Zheng, Qiu Chao Fang
Differential Revision: https://reviews.llvm.org/D80706
`SimplifySetCC` invokes `getNodeIfExists` without passing `Flags` argument and `getNodeIfExists` uses a default `SDNodeFlags` to intersect the original flags, as a consequence, flags like `nsw` is dropped. Added a new helper function `doesNodeExist` to check if a node exists without modifying its flags.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D89938
This patch is the initial patch for support of the AIX extended vector ABI. The extended ABI treats vector registers V20-V31 as non-volatile and we add them as callee saved registers in this patch.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D88676
For now, we are using the GPR to pass the arguments/return value for fp128 on Power8,
which is incorrect. It should be VSR. The reason why we do it this way is that,
we are setting the fp128 as illegal which make LLVM try to emulate it with i128 on
Power8. So, we need to correct it as legal.
Reviewed By: Nemanjai
Differential Revision: https://reviews.llvm.org/D91527
Added support for the options mabi=vec-extabi and mabi=vec-default which are analogous to qvecnvol and qnovecnvol when using XL on AIX.
The extended Altivec ABI on AIX is enabled using mabi=vec-extabi in clang and vec-extabi in llc.
Reviewed By: Xiangling_L, DiggerLin
Differential Revision: https://reviews.llvm.org/D89684
When the operand to an (s/u)int_to_fp node is an illegally typed load we
cannot reuse the load address since we can not build a proper dependancy
chain. The legalized loads will use a different chain output then the
illegal load. If we reuse the load address then we will build a
conversion node that uses the chain of the illegal load and operations
which modify the memory address in the other dependancy chain can be
scheduled before the floating point load which feeds the conversion.
Differential Revision: https://reviews.llvm.org/D91265
Putting the +1 before the zero-extend will allow scalar evolution to fold the expression in some cases such as the one shown in PowerPC's `shrink-wrap.ll` test.
Reviewed By: samparker
Differential Revision: https://reviews.llvm.org/D91724
New pseudo instructions GETtlsADDRPCREL and GETtlsldADDRPCREL are added for properly
setting REGMASK for tls_get_addr function when using PCRelative address.
Differential Revisien: https://reviews.llvm.org/D91420
Reviewed by: bsaleil
It is possible that we have different constants in different slots
of second vector double (float) of pow function. So, in this case
Exp->getSplatValue() will return nullptr. Here, I handle it properly.
Reviewed By: steven.zhang, PowerPC
Differential Revision: https://reviews.llvm.org/D91729
Support reserved [0-100] and non-reserved[101-65535] Clang/GNU init
priority values on AIX.
This patch maps Clang/GNU values into priority values used in sinit/sterm
functions. User can play with values and be able to get init to occur
before or after XL init and vice versa.
Differential Revision: https://reviews.llvm.org/D91272
Summary: We have the patterns to fold 2 RLWINMs before RA, while some RLWINM will be generated after RA, for example rGc4690b007743. If the RLWINM generated after RA followed by another RLWINM, we expect to perform the optimization too.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D89855
In some situations, the compiler may insert an accumulator prime instruction and
an accumulator unprime instruction with no use of that accumulator between the two.
That's for example the case when we store an accumulator after assembling it or
restoring it. This patch adds a peephole to remove these prime and unprime instructions.
Differential Revision: https://reviews.llvm.org/D91386
This patch is added to remove the unreachable MBBs reference in the jump table.
Differential Revisien: https://reviews.llvm.org/D90498
Reviewed by: amyk, bsaleil
Summary: This patch try to do the following transformation if the multiplier doen't fit int16:
(mul X, c1 << c2) -> (rldicr (mulli X, c1) c2)
Reviewed By: jsji, steven.zhang
Differential Revision: https://reviews.llvm.org/D87384
This to help review the impact of https://reviews.llvm.org/D89952 which
allows targets to fine tune what SelectionDAG does when vector CTPOP is
not legal.
Add more profitable sinking patterns if the target bb register pressure
is not too high.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D88126
As discussed on D90527, we should be be trying to move shift handling functionality into KnownBits to avoid code duplication in SelectionDAG/GlobalISel/ValueTracking.
The refactor to use the KnownBits fixed/min/max constant helpers allows us to hit a couple of cases that we were missing before.
We still need the getValidMinimumShiftAmountConstant case as KnownBits doesn't handle per-element vector cases.
Summary: This patch depends on D89846. We have the patterns to fold 2 RLWINMs in ppc-mi-peephole, while some RLWINM will be generated after RA, for example rGc4690b007743. If the RLWINM generated after RA followed by another RLWINM, we expect to perform the optimization after RA, too.
Reviewed By: shchenz, steven.zhang
Differential Revision: https://reviews.llvm.org/D89855
Vector types, quadword integers and f128 currently cannot be handled in
FastISel. We did not skip f128 type in lowering arguments, which causes
a crash. This patch will fix it.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D90206
Variable InnerIsSel references FalseRes, while FalseRes might be
zext/sext. So InnerIsSel should reference SetOrSelCC, otherwise a crash
will happen.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D90142
Unsigned 32-bit or shorter integer to ppcf128 conversion are currently
expanded as signed-to-double with an extra fadd to 'complement'. But on
PowerPC we have native instruction to directly convert unsigned to
double since ISA v2.06. This patch exploits it.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D89786
When converting a BUILD_VECTOR or VECTOR_SHUFFLE to a splatting load
as of 1461fb6e78, we inaccurately check
for a single user of the load and neglect to update the users of the
output chain of the original load. As a result, we can emit a new
load when the original load is kept and the new load can be reordered
after a dependent store. This patch fixes those two issues.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47891
Turn on TLS support for PCRel by default and update the test cases.
Differential Revision: https://reviews.llvm.org/D88738
Reviewed by: stefanp, kamaub
This patch implements the set boolean condition instructions introduced in
POWER10.
The set boolean condition instructions (set[n]bc[r]) are used during
the following situations:
- sign/zero/any extending i1 to an i32 or i64,
- reg+reg, reg+imm or floating point comparisons being sign/zero extended to i32 or i64,
- spilling CR bits (using the setnbc instruction)
Differential Revision: https://reviews.llvm.org/D87705
In this patch, Predicates fix added for the following:
* disable prefix-instrs will disable pcrelative-memops
* set two predicates PairedVectorMemops and PrefixInstrs for PLXVP/PSTXVP definitions
Differential Revision: https://reviews.llvm.org/D89727
Reviewed by: amyk, steven.zhang
From LangRef, FMF contract should not enable reassociating to form
arbitrary contractions. So it should not help rearrange nodes like
(fma (fmul x, c1), c2, y) into (fma x, c1*c2, y).
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D89527
Summary:
This patch does the following:
1. Make InitTargetOptionsFromCodeGenFlags() accepts Triple as a
parameter, because some options' default value is triple dependant.
2. DataSections is turned on by default on AIX for llc.
3. Test cases change accordingly because of the default behaviour change.
4. Clang Driver passes in -fdata-sections by default on AIX.
Reviewed By: MaskRay, DiggerLin
Differential Revision: https://reviews.llvm.org/D88737
This patch adds support for assemble disassemble intrinsics
for MMA.
Reviewed By: bsaleil, #powerpc
Differential Revision: https://reviews.llvm.org/D88739
Summary: This patch is derived from D87384.
In this patch we expand the existing decomposition of mul-by-constant to be more general by implementing 2 patterns:
```
mul x, (2^N + 2^M) --> (add (shl x, N), (shl x, M))
mul x, (2^N - 2^M) --> (sub (shl x, N), (shl x, M))
```
The conversion will be trigged if the multiplier is a big constant that the target can't use a single multiplication instruction to handle. This is controlled by the hook `decomposeMulByConstant`.
More over, the conversion benefits from an ILP improvement since the instructions are independent. A case with the sequence like following also gets benefit since a shift instruction is saved.
```
*res1 = a * 0x8800;
*res2 = a * 0x8080;
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D88201
In `rescheduleKillAboveMI`, current implementation uses `SmallSet` to track reg's defs and uses. When comparing, use `SmallSet.count` to find out if it's clobbered or used. It's not correct if involving subregisters. This patch uses `regOverlapsSet` already used by `rescheduleMIBelowKill` to fix the issue.
Fixed https://bugs.llvm.org/show_bug.cgi?id=47707.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D88716
SUMMARY:
In IBM compiler xlclang , there is an option -fnovisibility which suppresses visibility. For more details see: https://www.ibm.com/support/knowledgecenter/SSGH3R_16.1.0/com.ibm.xlcpp161.aix.doc/compiler_ref/opt_visibility.html.
We need to add the option -mignore-xcoff-visibility for compatibility with the IBM AIX OS (as the option is enabled by default in AIX). With this option llvm does not emit any visibility attribute to ASM or XCOFF object file.
The option only work on the AIX OS, for other non-AIX OS using the option will report an unsupported options error.
In AIX OS:
1.1 the option -mignore-xcoff-visibility is enabled by default , if there is not -fvisibility=* and -mignore-xcoff-visibility explicitly in the clang command .
1.2 if there is -fvisibility=* explicitly but not -mignore-xcoff-visibility explicitly in the clang command. it will generate visibility attributes.
1.3 if there are both -fvisibility=* and -mignore-xcoff-visibility explicitly in the clang command. The option "-mignore-xcoff-visibility" wins , it do not emit the visibility attribute.
The option -mignore-xcoff-visibility has no effect on visibility attribute when compile with -emit-llvm option to generated LLVM IR.
Reviewer: daltenty,Jason Liu
Differential Revision: https://reviews.llvm.org/D87451
Summary: This patch implements the builtins for xvtdivdp, xvtdivsp, xvtsqrtdp, xvtsqrtsp.
The instructions correspond to the following builtins:
int vec_test_swdiv(vector double v1, vector double v2);
int vec_test_swdivs(vector float v1, vector float v2);
int vec_test_swsqrt(vector double v1);
int vec_test_swsqrts(vector float v1);
This patch depends on D88274, which fixes the bug in copying from CRRC to GPRC/G8RC.
Reviewed By: steven.zhang, amyk
Differential Revision: https://reviews.llvm.org/D88278
Summary: How we copying the CRRC to GRC is using a single MFOCRF to copy the contents of CR field n (CR bits 4×n+32:4×n+35) into bits 4×n+32:4×n+35 of register GRC. That’s not correct because we expect the value of destination register equals to source so we have to put the the contents of CR field in the lowest 4 bits. This patch adds a RLWINM after MFOCRF to achieve that.
The problem came up when adding builtins for xvtdivdp, xvtdivsp, xvtsqrtdp, xvtsqrtsp, as posted in D88278. We need to move the outputs (in CR register) to GRC. However outputs of these instructions may not in a fixed CR# register, so we can’t directly add a rotation instruction in the .td patterns, but need to wait until the CR register is determined. Then we confirmed this should be a bug in POST-RA PSEUDO PASS.
Reviewed By: nemanjai, shchenz
Differential Revision: https://reviews.llvm.org/D88274
Summary:
Some design decision worth noting about:
I've noticed a recent mailing discussing about why string literal is
not affected by -fdata-sections for ELF target:
http://lists.llvm.org/pipermail/llvm-dev/2020-September/145121.html
But on AIX, our linker could not split the mergeable string like other target.
So I think it would make more sense for us to emit separate csect for
every mergeable string in -fdata-sections mode,
as there might not be other ways for linker to do garbage collection
on unused mergeable string.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D88339
It looks like in some circumstances when compiling with `-mcpu=pwr9` we create an EXTSWSLI node when which causes llc to fail. No such error occurs in pwr8 or lower.
This occurs in 32BIT AIX and BE Linux. the cause seems to be that the default return in combineSHL is to create an EXTSWSLI node. Adding a check for whether we are in PPC64 before that fixes the issue.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D87046
After removal of Darwin as a PowerPC subtarget, the VRSAVE
save/restore/spill/update code is no longer needed by any supported
subtarget, so remove it while keeping support for vrsave and related instruction
aliases for inline asm. I've pre-commited tests to document the existing vrsave
handling in relation to @llvm.eh.unwind.init and inline asm usage, as
well as a test which shows a beahviour change on AIX related to
returning vector type as we were wrongly emiting VRSAVE_UPDATE on AIX.
This patch improves the assembly output produced for string literals by
using character literals in byte lists. This provides the benefits of
having printable characters appear as such in the assembly output and of
having strings kept as logical units on the same line.
Reviewed By: daltenty
Differential Revision: https://reviews.llvm.org/D80953
This patch legalizes the v256i1 and v512i1 types that will be used for MMA.
It implements loads and stores of these types.
v256i1 is a pair of VSX registers, so for this type, we load/store the two
underlying registers. v512i1 is used for MMA accumulators. So in addition to
loading and storing the 4 associated VSX registers, we generate instructions to
prime (copy the VSX registers to the accumulator) after loading and unprime
(copy the accumulator back to the VSX registers) before storing.
This patch also adds the UACC register class that is necessary to implement the
loads and stores. This class represents accumulator in their unprimed form and
allow the distinction between primed and unprimed accumulators to avoid invalid
copies of the VSX registers associated with primed accumulators.
Differential Revision: https://reviews.llvm.org/D84968
According to POWER ISA, floating point instructions altering exception
bits in FPSCR should be 'may raise FP exception'. (excluding those
read or write the whole FPSCR directly, like mffs/mtfsf) We need to
model FPSCR well in future patches to handle the special case properly.
Instructions added mayRaiseFPException:
- fre(s)/frsqrte(s)
- fmadd(s)/fmsub(s)/fnmadd(s)/fnmsub(s)
- xscmpoqp/xscmpuqp/xscmpeqdp/xscmpgedp/xscmpgtdp
- xscvdphp/xscvhpdp/xvcvhpsp/xvcvsphp/xsrqpxp
- xsmaxcdp/xsincdp/xsmaxjdp/xsminjdp
Instructions removed mayRaiseFPException:
- xstdivdp/xvtdiv(d|s)p/xstsqrtdp/xvtsqrt(d|s)p
- xsabsdp/xsnabsdp/xvabs(d|s)p/xvnabs(d|s)p
- xsnegdp/xscpsgndp/xvneg(d|s)p/xvcpsgn(d|s)p
- xvcvsxwdp/xvcvuxwdp
- xscvdpspn/xscvspdpn
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D87738
This patch implements the vec_[all|any]_[eq | ne | lt | gt | le | ge] builtins for vector signed/unsigned __int128.
Differential Revision: https://reviews.llvm.org/D87910
This patch is the initial support for the Local Dynamic Thread Local Storage
model to produce code sequence and relocation correct to the ABI for the model
when using PC relative memory operations.
Differential Revision: https://reviews.llvm.org/D87721
This patch implements the vector string isolate (predicate and non-predicate
versions) builtins. The predicate builtins are custom selected within PPCISelDAGToDAG.
Differential Revision: https://reviews.llvm.org/D87671
This patch implements the 128-bit vector divide extended builtins in Clang/LLVM.
These builtins map to the vdivesq and vdiveuq instructions respectively.
Differential Revision: https://reviews.llvm.org/D87729
Stop combining loads and stores with PPCISD::ADD_TLS before we can merge the
node with with TLS_LOCAL_EXEC_MAT_ADDR. The issue is that
TLS_LOCAL_EXEC_MAT_ADDR cannot be selected by itself and requires the previous
ADD_TLS node that goes with it. However, we sometimes try to combine ADD_TLS
with loads and stores that come after it. If this happens then the ADD_TLS is
removed and TLS_LOCAL_EXEC_MAT_ADDR cannot be selected.
While this bug fix will address the issue it my not be ideal from a performance
perspective as we may be able to add patterns to combine TLS_LOCAL_EXEC_MAT_ADDR
with ADD_TLS with the load and store that comes after it all in one. However,
this is beyond the scope of this patch.
Reviewed By: NeHuang
Differential Revision: https://reviews.llvm.org/D88030
This is a follow-up of D86605. For strict DAG FP node, if its FP
exception behavior metadata is ignore, it should have nofpexcept flag.
But during custom lowering, this flag isn't passed down.
This is also seen on X86 target.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D87390
This patch implements the vec_gen[b|h|w|d|q]m function prototypes in altivec.h
in order to utilize the move to VSR with mask instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82725
This rewrites big parts of the fast register allocator. The basic
strategy of doing block-local allocation hasn't changed but I tweaked
several details:
Track register state on register units instead of physical
registers. This simplifies and speeds up handling of register aliases.
Process basic blocks in reverse order: Definitions are known to end
register livetimes when walking backwards (contrary when walking
forward then uses may or may not be a kill so we need heuristics).
Check register mask operands (calls) instead of conservatively
assuming everything is clobbered. Enhance heuristics to detect
killing uses: In case of a small number of defs/uses check if they are
all in the same basic block and if so the last one is a killing use.
Enhance heuristic for copy-coalescing through hinting: We check the
first k defs of a register for COPYs rather than relying on there just
being a single definition. When testing this on the full llvm
test-suite including SPEC externals I measured:
average 5.1% reduction in code size for X86, 4.9% reduction in code on
aarch64. (ranging between 0% and 20% depending on the test) 0.5%
faster compiletime (some analysis suggests the pass is slightly slower
than before, but we more than make up for it because later passes are
faster with the reduced instruction count)
Also adds a few testcases that were broken without this patch, in
particular bug 47278.
Patch mostly by Matthias Braun
This patch implements the vec_cntm function prototypes in altivec.h in order to
utilize the vector count mask bits instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82726
llc would crash for (store (fptosi-f128-i32)) when -mcpu=pwr8, we should
not generate FP_TO_(S|U)INT_IN_VSR for f128 types at this time. This
patch fixes it.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D86686
Summary:
When running a large test in LLVM_ENABLE_EXPENSIVE_CHECKS=ON mode,
buildbot could hit timeout.
Disable the test when this mode is on.
Also disable it for debug so that the test won't hang for too long.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D87794
This seems to have caused incorrect register allocation in some cases,
breaking tests in the Zig standard library (PR47278).
As discussed on the bug, revert back to green for now.
> Record internal state based on register units. This is often more
> efficient as there are typically fewer register units to update
> compared to iterating over all the aliases of a register.
>
> Original patch by Matthias Braun, but I've been rebasing and fixing it
> for almost 2 years and fixed a few bugs causing intermediate failures
> to make this patch independent of the changes in
> https://reviews.llvm.org/D52010.
This reverts commit 66251f7e1d, and
follow-ups 931a68f26b
and 0671a4c508. It also adjust some
test expectations.
The versions that take 'unsigned' will be removed in the future.
I tried to use getOriginalAlign instead of getAlign in some
places. getAlign factors in the minimum alignment implied by
the offset in the pointer info. Since we're also passing the
pointer info we can use the original alignment.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87592
This patch is the initial support for the Local Exec Thread Local
Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: Kamau Bridgeman
Differential Revision: https://reviews.llvm.org/D83404
Summary:
In small code model, AIX assembler could not deal with labels that
could not be reached within the [-0x8000, 0x8000) range from TOC base.
So when generating the assembly, we would need to help the assembler
by subtracting an offset from the label to keep the actual value
within [-0x8000, 0x8000).
Reviewed By: hubert.reinterpretcast, Xiangling_L
Differential Revision: https://reviews.llvm.org/D86879
DAG combiner folds (fma a 1.0 b) into (fadd a b) but the flag isn't
propagated into new fadd. This patch fixes that.
Some code in visitFMA is redundant and such support for vector constants
is missing. Need follow-up patch to clean.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D87037
with P9 Model
Enable the pre-ra and post-ra scheduler strategy for Power10 as we want
to customize the heuristic later. And switch the scheduler model with P9
model before P10 Model is available. The NoSchedModel is modelled as
in-order cpu and the pre-ra scheduler is not bi-directional which will
have big impact on the scheduler.
Reviewed By: jji
Differential Revision: https://reviews.llvm.org/D86865
From ISA, fcmpu will raise the Floating-Point Invalid Operation
Exception (SNaN) if either of the operands is a Signaling NaN by setting
the bit VXSNAN. But the instruction description didn't set the
mayRaiseFPException which might have impact on the scheduling or some
backend optimization.
Reviewed By: qiucf
Differential Revision: https://reviews.llvm.org/D83937
This adds the initial GlobalISel skeleton for PowerPC. It can only run
ir-translator and legalizer for `ret void`.
This is largely based on the initial GlobalISel patch for RISCV
(https://reviews.llvm.org/D65219).
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D83100
22a0edd0 introduced a config IsStrictFPEnabled, which controls the
strict floating point mutation (transforming some strict-fp operations
into non-strict in ISel). This patch disables the mutation by default
since we've finished PowerPC strict-fp enablement in backend.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D87222
In standard C library, both rint and nearbyint returns rounding result
in current rounding mode. But nearbyint never raises inexact exception.
On PowerPC, x(v|s)r(d|s)pic may modify FPSCR XX, raising inexact
exception. So we can't select constrained fnearbyint into xvrdpic.
One exception here is xsrqpi, which will not raise inexact exception, so
fnearbyint f128 is okay here.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D87220
This removes the after the fact FMF handling from D46854 in favor of passing fast math flags to getNode. This should be a superset of D87130.
This required adding a SDNodeFlags to SelectionDAG::getSetCC.
Now we manage to contant fold some stuff undefs during the
initial getNode that we don't do in later DAG combines.
Differential Revision: https://reviews.llvm.org/D87200
On Power10, it's profitable to schedule some stores with adjacent target
address together. This patch implements this feature.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D86754
This patch implements the vec_expandm function prototypes in altivec.h in order
to utilize the vector expand with mask instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82727
Libcall __gcc_qtou is not available, which breaks some tests needing
it. On PowerPC, we have code to manually expand the operation, this
patch applies it to constrained conversion. To keep it strict-safe,
it's using the algorithm similar to expandFP_TO_UINT.
For constrained operations marking FP exception behavior as 'ignore',
we should set the NoFPExcept flag. However, in some custom lowering
the flag is missed. This should be fixed by future patches.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D86605
As discussed in D86843, -earlycse-debug-hash should be used in more regression
tests to catch inconsistency between the hashing and the equivalence check.
Differential Revision: https://reviews.llvm.org/D86863
Previous implementations for the TLS models General Dynamic and Initial Exec
were missing the ELF::STT_TLS type on symbols that required the type. This patch
adds the type.
Reviewed By: sfertile, MaskRay
Differential Revision: https://reviews.llvm.org/D86777
The test case in https://bugs.llvm.org/show_bug.cgi?id=47373 exposed
two bugs in the PPC back end. The first one was fixed in commit
2771407584 but the test case had to
be added without -verify-machineinstrs due to the second bug.
This commit fixes the use-after-kill that is left behind by the
PPC MI peephole optimization.
Quite a while ago, we legalized these nodes as we added custom
handling for reciprocal estimates in the back end. We have since
moved to target-independent combines but neglected to turn off
legalization. As a result, we can now get selection failures on
non-VSX subtargets as evidenced in the listed PR.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=47373
This patch implements the builtins for Vector Multiply Builtins (vmulxxd family of instructions), and adds the appropriate test cases for these builtins. The builtins utilize the vector multiply instructions itnroduced with ISA 3.1.
Differential Revision: https://reviews.llvm.org/D83955
General purpose registers 30 and 31 are handled differently when they are
reserved as the base-pointer and frame-pointer respectively. This fixes the
offset of their fixed-stack objects when there are fpr calle-saved registers.
Differential Revision: https://reviews.llvm.org/D85850
On -O0, i1 strict_fsetcc will be promoted to i32. We don't handle that
in TD patterns. This patch fills logic in PPCISelDAGToDAG to handle more
cases.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D86595
Qiu Chaofan