use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
llvm-svn: 70270
PR2957
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
llvm-svn: 70225
to precisely describe the h-register subreg register classes.
Thanks to Jakob Stoklund Olesen for spotting this and for the
initial patch!
Also, make getStoreRegOpcode and getLoadRegOpcode aware of the
needs of h registers.
llvm-svn: 70211
between registers and the stack may be required with the APCS ABI, but it
isn't tied to using a particular version of the ARM architecture.
llvm-svn: 69978
chained and "flagged" together. I also made a few changes to handle the
chain and flag values more consistently. I found these problems by
inspection so I'm not aware of anything that breaks because of them
(thus no testcase).
llvm-svn: 69977
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
A clean up of x86 shuffle code, and some canonicalizing in DAGCombiner is next.
llvm-svn: 69952
in the MachineFunction class, renaming it to addLiveIn for consistency with
the same method in MachineBasicBlock. Thanks for Anton for suggesting this.
llvm-svn: 69615
leaq foo@TLSGD(%rip), %rdi
as part of the instruction sequence. Using a register other than %rdi and then
copying it to %rdi is not valid.
llvm-svn: 69350
- Add patterns for h-register extract, which avoids a shift and mask,
and in some cases a temporary register.
- Add address-mode matching for turning (X>>(8-n))&(255<<n), where
n is a valid address-mode scale value, into an h-register extract
and a scaled-offset address.
- Replace X86's MOV32to32_ and related instructions with the new
target-independent COPY_TO_SUBREG instruction.
On x86-64 there are complicated constraints on h registers, and
CodeGen doesn't currently provide a high-level way to express all of them,
so they are handled with a bunch of special code. This code currently only
supports extracts where the result is used by a zero-extend or a store,
though these are fairly common.
These transformations are not always beneficial; since there are only
4 h registers, they sometimes require extra move instructions, and
this sometimes increases register pressure because it can force out
values that would otherwise be in one of those registers. However,
this appears to be relatively uncommon.
llvm-svn: 68962
ISD::SIGN_EXTEND_INREG. Tablegen-generated code can handle
these cases, and the scheduling issues observed earlier
appear to be resolved now.
llvm-svn: 68959
to support C99 inline, GNU extern inline, etc. Related bugzilla's
include PR3517, PR3100, & PR2933. Nothing uses this yet, but it
appears to work.
llvm-svn: 68940
Create debug_inlined dwarf section using these information. This info is used by gdb, at least on Darwin, to enable better experience debugging inlined functions. See DwarfWriter.cpp for more information on structure of debug_inlined section.
llvm-svn: 68847
register destinations that are tied to source operands. The
TargetInstrDescr::findTiedToSrcOperand method silently fails for inline
assembly. The existing MachineInstr::isRegReDefinedByTwoAddr was very
close to doing what is needed, so this revision makes a few changes to
that method and also renames it to isRegTiedToUseOperand (for consistency
with the very similar isRegTiedToDefOperand and because it handles both
two-address instructions and inline assembly with tied registers).
llvm-svn: 68714
Every function has the address of its frame in the beginning of code section.
The frame address is retrieved and used to pass arguments.
llvm-svn: 68597
with SUBREG_TO_REG, teach SimpleRegisterCoalescing to coalesce
SUBREG_TO_REG instructions (which are similar to INSERT_SUBREG
instructions), and teach the DAGCombiner to take advantage of this on
targets which support it. This eliminates many redundant
zero-extension operations on x86-64.
This adds a new TargetLowering hook, isZExtFree. It's similar to
isTruncateFree, except it only applies to actual definitions, and not
no-op truncates which may not zero the high bits.
Also, this adds a new optimization to SimplifyDemandedBits: transform
operations like x+y into (zext (add (trunc x), (trunc y))) on targets
where all the casts are no-ops. In contexts where the high part of the
add is explicitly masked off, this allows the mask operation to be
eliminated. Fix the DAGCombiner to avoid undoing these transformations
to eliminate casts on targets where the casts are no-ops.
Also, this adds a new two-address lowering heuristic. Since
two-address lowering runs before coalescing, it helps to be able to
look through copies when deciding whether commuting and/or
three-address conversion are profitable.
Also, fix a bug in LiveInterval::MergeInClobberRanges. It didn't handle
the case that a clobber range extended both before and beyond an
existing live range. In that case, multiple live ranges need to be
added. This was exposed by the new subreg coalescing code.
Remove 2008-05-06-SpillerBug.ll. It was bugpoint-reduced, and the
spiller behavior it was looking for no longer occurrs with the new
instruction selection.
llvm-svn: 68576
builds.
--- Reverse-merging (from foreign repository) r68552 into '.':
U test/CodeGen/X86/tls8.ll
U test/CodeGen/X86/tls10.ll
U test/CodeGen/X86/tls2.ll
U test/CodeGen/X86/tls6.ll
U lib/Target/X86/X86Instr64bit.td
U lib/Target/X86/X86InstrSSE.td
U lib/Target/X86/X86InstrInfo.td
U lib/Target/X86/X86RegisterInfo.cpp
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86CodeEmitter.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86InstrInfo.h
U lib/Target/X86/X86ISelDAGToDAG.cpp
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U lib/Target/X86/X86ISelLowering.h
U lib/Target/X86/X86InstrInfo.cpp
U lib/Target/X86/X86InstrBuilder.h
U lib/Target/X86/X86RegisterInfo.td
llvm-svn: 68560
This introduces a small regression on the generated code
quality in the case we are just computing addresses, not
loading values.
Will work on it and on X86-64 support.
llvm-svn: 68552
When compiling in Thumb mode, only the low (R0-R7) registers are available
for most instructions. Breaking the low registers into a new register class
handles this. Uses of R12, SP, etc, are handled explicitly where needed
with copies inserted to move results into low registers where the rest of
the code generator can deal with them.
llvm-svn: 68545
entered via fall-through. Don't miss fallthroughs from blocks
terminated by conditional branches. Also, move
isOnlyReachableByFallthrough out of line.
llvm-svn: 68129
only reachable via fall-through edges. This dramatically reduces the
number of labels printed, and thus also the number of labels the
assembler must parse and remember.
llvm-svn: 68073
x * 40
=>
shlq $3, %rdi
leaq (%rdi,%rdi,4), %rax
This has the added benefit of allowing more multiply to be folded into addressing mode. e.g.
a * 24 + b
=>
leaq (%rdi,%rdi,2), %rax
leaq (%rsi,%rax,8), %rax
llvm-svn: 67917
%a = ...
%b = and i32 %a, 2
%c = srl i32 %b, 1
%d = br i32 %c,
into
%a = ...
%b = and %a, 2
%c = X86ISD::CMP %b, 0
%d = X86ISD::BRCOND %c ...
This applies only when the AND constant value has one bit set and the SRL
constant is equal to the log2 of the AND constant. The back-end is smart enough
to convert the result into a TEST/JMP sequence.
llvm-svn: 67728
to be returned in DL. LLVM's multiple-return-value support is
not ABI-conforming; front-ends that wish to have code emitted
that conforms to an ABI are currently expected to make
arrangements for this on their own rather than assuming that
multiple-return-values will automatically do the right thing.
This commit doesn't fundamentally change this situation.
llvm-svn: 67588
same as a normal i80 {low64, high16} rather
than its own {high64, low16}. A depressing number
of places know about this; I think I got them all.
Bitcode readers and writers convert back to the old
form to avoid breaking compatibility.
llvm-svn: 67562
Bill Wendling