This changes a couple of calls to LiveRegs.contains to
!LiveRegs.available, one in Thumb1FrameLoweringInfo (which modifies a
test to look more correct to me, given r7 should be the frame pointer so
is not available), and another in the ARMLoadStoreOptimizer, that I
don't have a test for, it was just found by inspection.
Differential Revision: https://reviews.llvm.org/D107454
Some of the Arm complex pattern functions call canExtractShiftFromMul,
which can modify the DAG in-place. For this to be valid and handled
successfully we need to define ComplexPatternFuncMutatesDAG.
Differential Revision: https://reviews.llvm.org/D107476
D107068 fixed the same problem on aarch64 but the arm variant wasn't exposed in existing test coverage.
I've copied the arm64-neon-copy tests (and stripped the intrinsic test from it) for testing on arm neon builds as well.
I just hit a nasty bug when writing a unit test after calling MF->getFrameInfo()
without declaring the variable as a reference.
Deleting the copy-constructor also showed a place in the ARM backend which was
doing the same thing, albeit it didn't impact correctness there from the looks of it.
This implements `MCInstrAnalysis::evaluateMemoryOperandAddress()` for
Arm so that the disassembler can print the target address of memory
operands that use PC+immediate addressing.
Differential Revision: https://reviews.llvm.org/D105979
This assert is intended to ensure that the high registers are not
selected when it is passed to one of the thumb UXT instructions. However
it was triggering even for 32 bit where no UXT instruction is emitted.
Fixes PR51313.
Differential Revision: https://reviews.llvm.org/D107363
Previously we would emit constant pool entries for ldr inline asm at the
very end of AsmPrinter::doFinalization(). However, if we're emitting
dwarf aranges, that would end all sections with aranges. Then if we have
constant pool entries to be emitted in those same sections, we'd hit an
assert that the section has already been ended.
We want to emit constant pool entries before emitting dwarf aranges.
This patch splits out arm32/64's constant pool entry emission into its
own MCTargetStreamer virtual method.
Fixes PR51208
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D107314
I'm not sure this is the best way to approach this,
but the situation is rather not very detectable unless we explicitly call it out when refusing to advise to unroll.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D107271
If the block target for a WLSTP instruction is known to be out of range,
and cannot be fixed by the ARMBlockPlacementPass, we can relax it to a
DLSTP (and cmp/branch) to still allow the creation of tail predicated
loops. That is what this patch does, adding extra revert code to the
fallback path of ARMBlockPlacementPass.
Due to the code produced when reverting, this creates a DLSTP between a
Bcc and a Br. As a DLS isn't necessarily a terminator we need to split
the block to move the DLS/Br into.
Differential Revision: https://reviews.llvm.org/D104709
This distributes reductions based on the relative offset of loads, if
one is found from their operands. Given chains of reductions this will
then sort them in ascending load order, which in turn can help simple
prefetches latch on to increasing strides more easily.
Differential Revision: https://reviews.llvm.org/D106569
This adds a combine for adds of reductions, distributing them so that
they occur sequentially to enable better use of accumulating VADDVA
instructions. It combines:
add(X, add(vecreduce(Y), vecreduce(Z))) ->
add(add(X, vecreduce(Y)), vecreduce(Z))
and
add(add(A, reduce(B)), add(C, reduce(D))) ->
add(add(add(A, C), reduce(B)), reduce(D))
These together distribute the add's so that more reductions can be
selected to VADDVA.
Differential Revision: https://reviews.llvm.org/D106532
Under MVE we can use VADDV/VADDVA's to perform integer add reductions,
so it can be beneficial to use more reductions than summing subvectors
and reducing once. Especially for VMLAV/VMLAVA the mul can be
incorporated into the reduction, producing less instructions.
Some of the test cases currently get larger due to extra integer adds,
but will be improved in a followup patch.
Differential Revision: https://reviews.llvm.org/D106531
Same as 91bd3ad128, this doesn't really
change anything but gives the registers better names than the ones
tablegen would define. And fills in the missing gaps.
This makes a couple of changes to the costing of MLA reduction patterns,
to more accurately cost various patterns that can come up from
vectorization.
- The Arm implementation of getExtendedAddReductionCost is altered to
only provide costs for legal or smaller types. Larger than legal types
need to be split, which currently does not work very well, especially
for predicated reductions where the predicate may be legal but needs to
be split. Currently we limit it to legal or smaller input types.
- The getReductionPatternCost has learnt that reduce(ext(mul(ext, ext))
is a pattern that can come up, and can be treated the same as
reduce(mul(ext, ext)) providing the extension types match.
- And it has been adjusted to not count the ext in reduce(mul(ext, ext))
as part of a reduce(mul) pattern.
Together these changes help to more accurately cost the mla reductions
in cases such as where the extend types don't match or the extend
opcodes are different, picking better vector factors that don't result
in expanded reductions.
Differential Revision: https://reviews.llvm.org/D106166
- This patch consists of the bare basic code needed in order to generate some assembly for the z/OS target.
- Only the .text and the .bss sections are added for now.
- The relevant MCSectionGOFF/Symbol interfaces have been added. This enables us to print out the GOFF machine code sections.
- This patch enables us to add simple lit tests wherever possible, and contribute to the testing coverage for the z/OS target
- Further improvements and additions will be made in future patches.
Reviewed By: tmatheson
Differential Revision: https://reviews.llvm.org/D106380
This implements the isLoadFromStackSlot and isStoreToStackSlot for MVE
MVE_VSTRWU32 and MVE_VLDRWU32 functions. They behave the same as many
other loads/stores, expecting a FI in Op1 and zero offset in Op2. At the
same time this alters VLDR_P0_off and VSTR_P0_off to use the same code
too, as they too should be returning VPR in Op0, take a FI in Op1 and
zero offset in Op2.
Differential Revision: https://reviews.llvm.org/D106797
The register class required for some MVE loads/stores is more
constrained than the register we use when creating postinc. Make sure we
constrain the register class to keep the code correct.
I have added a new FastMathFlags parameter to getArithmeticReductionCost
to indicate what type of reduction we are performing:
1. Tree-wise. This is the typical fast-math reduction that involves
continually splitting a vector up into halves and adding each
half together until we get a scalar result. This is the default
behaviour for integers, whereas for floating point we only do this
if reassociation is allowed.
2. Ordered. This now allows us to estimate the cost of performing
a strict vector reduction by treating it as a series of scalar
operations in lane order. This is the case when FP reassociation
is not permitted. For scalable vectors this is more difficult
because at compile time we do not know how many lanes there are,
and so we use the worst case maximum vscale value.
I have also fixed getTypeBasedIntrinsicInstrCost to pass in the
FastMathFlags, which meant fixing up some X86 tests where we always
assumed the vector.reduce.fadd/mul intrinsics were 'fast'.
New tests have been added here:
Analysis/CostModel/AArch64/reduce-fadd.ll
Analysis/CostModel/AArch64/sve-intrinsics.ll
Transforms/LoopVectorize/AArch64/strict-fadd-cost.ll
Transforms/LoopVectorize/AArch64/sve-strict-fadd-cost.ll
Differential Revision: https://reviews.llvm.org/D105432
In mandatory tail calling conventions we might have to deallocate stack
space used by our arguments before return. This happens after popping
CSRs, so the pop cannot be turned into the return itself in this case.
The else branch here was already a nop, so removing it as a tidy-up.
This removes the promotion of NEON AND, OR and XOR nodes to v2i32/v4i32,
treating them the same as the AArch64 and MVE backends where we just add
the relevant patterns for each legal type. This prevents a lot of
bitcasts from being added to the DAG, which have the potential to make
optimizations more difficult. It does mean adding extra patterns, and
some codegen can change due to the types now being legal, not promoted.
Differential Revision: https://reviews.llvm.org/D105588
This relaxes the VMLAV and VADDV reduction recognition code to handle
smaller than legal types, extending them as needed. That was already
handled for some reductions, this extends it to more types in a more
generic way. If a smaller than legal value is found it is extended to
the legal type as needed.
Differential Revision: https://reviews.llvm.org/D106051
Corollary to 1113e06821 this allows us to
match gather that dont produce a full vector width results. They use an
extended gather which is truncated back to the original type.
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
This patch makes vector spills valid for tail predication when all loads
from the same stack slot are within the loop
Differential Revision: https://reviews.llvm.org/D105443
We have a DAG combine for recognizing the sequence of nodes that make up
an MVE VQDMULH, but only currently handles specifically legal types.
This patch expands that to other power-2 vector types. For smaller than
legal types this means any_extending the type and casting it to a legal
type, using a VQDMULH where we only use some of the lanes. The result is
sign extended back to the original type, to properly set the invalid
lanes. Larger than legal types are split into chunks with extracts and
concat back together.
Differential Revision: https://reviews.llvm.org/D105814
For i64 reductions we currently try and convert add(VMLALV(X, Y), B) to
VMLALVA(B, X, Y), incorporating the addition into the VMLALVA. If we
have an add of an existing VMLALVA, this patch pushes the add up above
the VMLALVA so that it may potentially be simplified further, for
example being folded into another VMLALV.
Differential Revision: https://reviews.llvm.org/D105686
MVE does not have a VMLALV instruction that can perform v16i8 -> i64
reductions, like it does for v8i16->i64 and v4i32->i64 reductions. That
means that the pattern to create them will be spilt up by type
legalization, creating a lot of instructions.
This extends the patterns for matching i64 reductions a little to handle
the v16i8->i64 case. We need to turn them into a pair of v8i16->i64
VMLALVs that each perform half of the reduction and are summed together
(so the later is a VMLALVA). The order of the lanes does not matter for
the reduction so we generate a MVEEXT for the extension, that will
either be folded into a extending load or can be optimized to a
VREV/VMOVL. Some of the resulting codegen isn't optimal, but will be
improved in a later patch.
Differential Revision: https://reviews.llvm.org/D105680
If we try to create a new GlobalVariable on each iteration, the Module will
detect the name collision and "helpfully" rename later iterations by appending
".1" etc. But "___udivsi3.1" doesn't exist and we definitely don't want to try
to call it.
So instead check whether there's already a global with the right name in the
module and use that if so.
This also fixes some missing implicit uses on call instructions, adds
missing G_ASSERT_SEXT/ZEXT annotations, and some missing outgoing
sext/zexts. This also fixes not respecting tablegen requested type
promotions.
This starts treating f64 passed in i32 GPRs as a type of custom
assignment, which restores some previously XFAILed tests. This is due
to getNumRegistersForCallingConv returns a static value, but in this
case it is context dependent on other arguments.
Most of the ugliness is reproducing a hack CC_MipsO32 uses in
SelectionDAG. CC_MipsO32 depends on a bunch of vectors populated from
the original IR argument types in MipsCCState. The way this ends up
working in GlobalISel is it only ends up inspecting the most recently
added vector element. I'm pretty sure there are cleaner ways to do
this, but this seemed easier than fixing up the current DAG
handling. This is another case where it would be easier of the
CCAssignFns were passed the original type instead of only the
pre-legalized ones.
There's still a lot of junk here that shouldn't be necessary. This
also likely breaks big endian handling, but it wasn't complete/tested
anyway since the IRTranslator gives up on big endian targets.
Similar to D91921 (and D104515) this introduces two MVESEXT and MVEZEXT
nodes that larger-than-legal sext and zext are lowered to. These either
get optimized away or end up becoming a series of stack loads/store, in
order to perform the extending whilst keeping the order of the lanes
correct. They are generated from v8i16->v8i32, v16i8->v16i16 and
v16i8->v16i32 extends, potentially with a intermediate extend for the
larger v16i8->v16i32 extend. A number of combines have been added for
obvious cases that come up in tests, notably MVEEXT of shuffles. More
may be needed in the future, but this seems to cover most of the cases
that come up in the tests.
Differential Revision: https://reviews.llvm.org/D105090
This patch removes the IsPairwiseForm flag from the Reduction Cost TTI
hooks, along with some accompanying code for pattern matching reductions
from trees starting at extract elements. IsPairWise is now assumed to be
false, which was the predominant way that the value was used from both
the Loop and SLP vectorizers. Since the adjustments such as D93860, the
SLP vectorizer has not relied upon this distinction between paiwise and
non-pairwise reductions.
This also removes some code that was detecting reductions trees starting
from extract elements inside the costmodel. This case was
double-counting costs though, adding the individual costs on the
individual instruction _and_ the total cost of the reduction. Removing
it changes the costs in llvm/test/Analysis/CostModel/X86/reduction.ll to
not double count. The cost of reduction intrinsics is still tested
through the various tests in
llvm/test/Analysis/CostModel/X86/reduce-xyz.ll.
Differential Revision: https://reviews.llvm.org/D105484
This parameter controls how much space is reserved for incoming
values. There are always going to be 2 incoming values in this case.
While there remove the unused std::vector right below.
Found while looking at porting this code to RISCV.
SelectionDAG's equivalents in ISD::InputArg/OutputArg track the
original argument index. Mips relies on this, and its currently
reinventing its own parallel CallLowering infrastructure which tracks
these indexes on the side. Add this to help move towards deleting the
custom mips handling.
D104868 removed an (incorrect) fold for distributing BFI instructions in
a chain, combining them into a single instruction. BFIs like that are
hard to test, as the patterns are often destroyed before they become
BFIs. But it can come up in places, with chains of BFIs that can be
combined.
This patch adds a replacement, which reassociates BFI instructions with
non-overlapping insertion masks so that low bits are inserted first.
This can end up sorting the nodes so that adjacent inserts are next to
one another, allowing the existing folds to combine into a single BFI.
Differential Revision: https://reviews.llvm.org/D105096
Much like fixed-point to floating-point conversion, the converse can
also be transformed into a fixed-point VCVT. This patch transforms
multiplications of floating point numbers by 2^n into a VCVT_fix. The
exception is that a float to fixed conversion with 1 fractional bit
ends up being an FADD (FADD(x, x) emulates FMUL(x, 2)) rather than an FMUL so there is a special case for that. This patch also moves the code from https://reviews.llvm.org/D103903 into a separate function as fixed to float and float to fixed are very similar.
Differential Revision: https://reviews.llvm.org/D104793
This enables proper lowering of non-byte sized loads. We still aren't
faithfully preserving memory types everywhere, so the legality checks
still only consider the size.
Enable the emission of a GNU attributes section by reusing the code for
emitting the ARM build attributes section.
The GNU attributes follow the exact same section format as the ARM
BuildAttributes section, so this can be factored out and reused for GNU
attributes generally.
The immediate motivation for this is to emit a GNU attributes section for the
vector ABI on SystemZ (https://reviews.llvm.org/D105067).
Review: Logan Chien, Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D102894
This prevents constant gep operands from being hoisted by the Constant
Hoisting pass, leaving them to CodegenPrepare which can usually do a
better job at splitting large offsets. This can, in general, improve
performance and decrease codesize, especially for v6m where many
constants have a high cost.
Differential Revision: https://reviews.llvm.org/D104877
I believe this Changed flag should be initialized to false,
otherwise the if (!Changed) is always dead. This doesn't
manifest in a functional issue because the PHINode checks will
fail if nothing changed. They are identical to the earlier
checks that must have already failed to get into this else block.
While there remove an else after return to reduce indentation.
Differential Revision: https://reviews.llvm.org/D105159
`ARMInstPrinter::printMveAddrModeQOperand()` was added in D62680, but
was never used. It looks like `printT2AddrModeImm8Operand<false>()` is
used instead.
Differential Revision: https://reviews.llvm.org/D105124
GlobalISel is relying on regular MachineMemOperands to track all of
the memory properties of accesses. Just the raw byte size is
insufficent to disambiguate all situations. For example, if we need to
split an unaligned extending load, we need to know the number of bits
in the original source value and can't infer it from the result
type. This is also a problem for extending vector loads.
This does decrease the maximum representable size from the full
uint64_t bytes to a maximum of 16-bits. No in tree testcases hit this,
other than places using UINT64_MAX for unknown sizes. This may be an
issue for G_MEMCPY and co., although they can just use unknown size
for large static sizes. This also has potential for backend abuse by
relying on the type when it really shouldn't be relevant after
selection.
This does not include the necessary MIR printer/parser changes to
represent this.
This adds a small fold for extract (ARM_BUILD_VECTOR) to fold to the
original node. This can help simplify the resulting codegen in some
cases.
Differential Revision: https://reviews.llvm.org/D104860
Previously xscale was known to everything apart
from the ELF streamer so we would crash as soon
as you tried to output an object file.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D104776
This adds another small fold for extract of a vdup, between a i32 and a
f32, converting to a BITCAST. This allows some extra folding to happen,
simplifying the resulting code.
Differential Revision: https://reviews.llvm.org/D104857
The MVETRUNC node truncates two wide vectors to a single vector with
narrower elements. This is usually lowered to a series of extract/insert
elements, going via GPR registers. This patch changes that to instead
use a pair of truncating stores and a stack reload. This cuts down the
number of instructions at the expense of some stack space.
Differential Revision: https://reviews.llvm.org/D104515
Currently, when encountering store(trunc(..)) where the trunc is double
a legal vector lenth in MVE, we spilt the node into two different stores
each performing half of the trunc from the wider type. This works well
for efficiently lowering wider than legal types, else the trunc becomes
a series of individual lane moves. Unfortunately this splitting is
currently one of the first combines attempted, so can happen before any
other combines which might be more preferable.
This patch instead introduces the concept of a MVETRUNC ISel node that
the trunk is initially lowered to, to keep it intact as a single item as
opposed to splitting it up. This allows us to push the store(trunc(..))
combine later, allowing other optimisations to potentially happen on the
trunc first. The store(trunc(..)) splitting can then be done later in
the legalisation period if needed, or else fall back to a buildvector as
before.
This can also be used in the future to lower to loads/stores, as opposed
to the more expensive lane extracts/inserts. Some extra combines are
added to keep all the existing tests happy.
Differential Revision: https://reviews.llvm.org/D91921
For a bfi chain like:
a = bfi input, x, y
b = bfi a, x', y'
The previous code was RAUW'ing a with x, mutating the second 'b' bfi, and when
SelectionDAG's CSE code ended up deleting it unexpectedly, bad things happend.
There's no need to RAUW in this case because we can just return our newly
created replacement BFI node. It also looked incorrect because it didn't account
for other users of the 'a' bfi.
Since it seems that chains of more than 2 BFI nodes are hard/impossible to
produce without this combine kicking in at some point, I've removed that
functionality since it had no test coverage.
rdar://79095399
Differential Revision: https://reviews.llvm.org/D104868
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
As a minor adjustment to the existing lowering of offset scatters, this
extends any smaller-than-legal vectors into full vectors using a zext,
so that the truncating scatters can be used. Due to the way MVE
legalizes the vectors this should be cheap in most situations, and will
prevent the vector from being scalarized.
Differential Revision: https://reviews.llvm.org/D103704
v6m cores only have a limited number of registers available. Unrolling
can mean we spend more on stack spills and reloads than we save from the
unrolling. This patch adds an extra heuristic to put a limit on the
unroll count for loops with multiple live out values, as measured from
the LCSSA phi nodes.
Differential Revision: https://reviews.llvm.org/D104659
Since this method can apply to cmpxchg operations, make sure it's clear
what value we're actually retrieving. This will help ensure we don't
accidentally ignore the failure ordering of cmpxchg in the future.
We could potentially introduce a getOrdering() method on AtomicSDNode
that asserts the operation isn't cmpxchg, but not sure that's
worthwhile.
Differential Revision: https://reviews.llvm.org/D103338
Conversion from a fixed-point number to a floating-point number is done by
multiplying the fixed-point number by 2^(-n) where n is the number of
fractional bits. Currently this is lowered to a vcvt
(integer to floating-point) then a vmul, but it can instead be lowered
directly to a vcvt (fixed-point to floating-point). This patch enables
such transformations as long as the multiplication factor is a power of 2.
Differential Revision: https://reviews.llvm.org/D103903
getFramePointerReg only depends on information in ARMSubtarget,
so move it in there so it can be accessed from more places.
Make use of ARMSubtarget::getFramePointerReg to remove duplicated code.
The main use of useR7AsFramePointer is getFramePointerReg, so inline it.
Differential Revision: https://reviews.llvm.org/D104476
The instruction can be 16-bit aligned while targeting 32-bit aligned
code. To calculate the target address correctly, the address of the
instruction has to be adjusted.
Differential Revision: https://reviews.llvm.org/D104446
This only applies to FastIsel. GlobalIsel seems to sidestep
the issue.
This fixes https://bugs.llvm.org/show_bug.cgi?id=46996
One of the things we do in llvm is decide if a type needs
consecutive registers. Previously, we just checked if it
was an array or not.
(plus an SVE specific check that is not changing here)
This causes some confusion when you arbitrary IR like:
```
%T1 = type { double, i1 };
define [ 1 x %T1 ] @foo() {
entry:
ret [ 1 x %T1 ] zeroinitializer
}
```
We see it is an array so we call CC_AArch64_Custom_Block
which bails out when it sees the i1, a type we don't want
to put into a block.
This leaves the location of the double in some kind of
intermediate state and leads to odd codegen. Which then crashes
the backend because it doesn't know how to implement
what it's been asked for.
You get this:
```
renamable $d0 = FMOVD0
$w0 = COPY killed renamable $d0
```
Rather than this:
```
$d0 = FMOVD0
$w0 = COPY $wzr
```
The backend knows how to copy 64 bit to 64 bit registers,
but not 64 to 32. It can certainly be taught how but the real
issue seems to be us even trying to assign a register block
in the first place.
This change makes the logic of
AArch64TargetLowering::functionArgumentNeedsConsecutiveRegisters
a bit more in depth. If we find an array, also check that all the
nested aggregates in that array have a single member type.
Then CC_AArch64_Custom_Block's assumption of a type that looks
like [ N x type ] will be valid and we get the expected codegen.
New tests have been added to exercise these situations. Note that
some of the output is not ABI compliant. The aim of this change is
to simply handle these situations and not to make our processing
of arbitrary IR ABI compliant.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D104123
Under MVE v4f32 and v8f16 vectors should be using v4i1/v8i1 predicates
for the setcc result type, as they have predicated registers for those
types. Setting this correctly prevents some inefficient optimizations
from happening.
This commit adds nodes that might not always be used, which the
expensive checks builder does not like. Reverting for now to think up a
better way of handling it.
As a minor adjustment to the existing lowering of offset scatters, this
extends any smaller-than-legal vectors into full vectors using a zext,
so that the truncating scatters can be used. Due to the way MVE
legalizes the vectors this should be cheap in most situations, and will
prevent the vector from being scalarized.
Differential Revision: https://reviews.llvm.org/D103704
A pointer will always fit into an i32, so a rq offset gather/scatter can
be used with v4i8 and v4i16 gathers, using a base of 0 and the Ptr as
the offsets. The rq gather can then correctly extend the type, allowing
us to use the gathers without falling back to scalarizing.
This patch rejigs tryCreateMaskedGatherOffset in the
MVEGatherScatterLowering pass to decompose the Ptr into Base:0 +
Offset:Ptr (with a scale of 1), if the Ptr could not be decomposed from
a GEP. v4i32 gathers will already use qi gathers, this extends that to
v4i8 and v4i16 gathers using the extending rq variants.
Differential Revision: https://reviews.llvm.org/D103674
This adjusts some of how the gather/scatter lowering pass passes around
data and where certain gathers/scatters are created from. It should not
effect code generation on its own, but allows other patches to more
clearly reason about the code.
A number of extra test cases were also added for smaller gathers/
scatters that can be extended, and some of the test comments were
updated.
This adds t2WhileLoopStartTP, similar to the t2DoLoopStartTP added in
D90591. It keeps a reference to both the tripcount register and the
element count register, so that the ARMLowOverheadLoops pass in the
backend can pick the correct one without having to search for it from
the operand of a VCTP.
Differential Revision: https://reviews.llvm.org/D103236
Re-applying this patch after bots failures. Should be fine now.
The function __multi3() is undefined on 32-bit ARM, so a call to it should
never be emitted. Instead, plain instructions need to be generated to
perform 128-bit multiplications.
Differential Revision: https://reviews.llvm.org/D103906
Surprisingly, not all instructions are always simplified after unrolling
and before MVE gather/scatter lowering. Notably dead gather operations
can be left around which cause the gather/scatter lowering pass to crash
if there are multiple gathers, some of which are dead.
This patch ensures they are simplified before we modify anything, which
can change some of the existing tests, including making them no-longer
test what they originally tested. This uses a combination of disabling
the gather/scatter lowering pass and adjusting the test to keep them as
before.
Differential Revision: https://reviews.llvm.org/D103150
Debug info is currently preventing VPT block creation, leading to
different codegen. This patch attempts to skip any debug instructions
during vpt block creation, making sure they do not interfere.
Differential Revision: https://reviews.llvm.org/D103610
The function __multi3() is undefined on 32-bit ARM, so a call to it
should never be emitted. Instead, plain instructions need to be
generated to perform 128-bit multiplications.
Differential Revision: https://reviews.llvm.org/D103906
This is a fix for PR50481
Immediate values for AddrModeT2_i8s4 are already scaled in MCinst operand.
This patch changes the number of bits and scale factor to reflect that
state when checking stack offset status. AddrModeT2_i7s[2|4] also have
this particularity but since MVE instructions are not outlined, just move
these cases to the unhandled ones.
Differential Revision: https://reviews.llvm.org/D103167
If we cannot otherwise use a VMOVimm/VMOVFPimm/VMVNimm, fall back to
producing a VDUP(const) as opposed to a constant pool load. This will at
least be smaller codesize and can allow the VDUP to be folded into other
instructions.
Differential Revision: https://reviews.llvm.org/D103808
Don't require a specific kind of IRBuilder for TargetLowering hooks.
This allows us to drop the IRBuilder.h include from TargetLowering.h.
Differential Revision: https://reviews.llvm.org/D103759
It's still in use in a few places so we can't delete it yet but there's not
many at this point.
Differential Revision: https://reviews.llvm.org/D103352
David Green