Previously we only allowed these through if the subvector came from a compare or test instruction which we would again check for during isel.
With this change we only check for the compare and test instructions during isel and have fallback patterns that emit the shifts if needed.
I noticed that in a lot of cases we don't actually see the compare during lowering and rely on an odd legalization of concat_vectors with a zero vector as the second argument. This keeps the concat_vectors around long enough for a later dag combine to expose the compare then we re-legalize the concat_vectors and catch the compare.
llvm-svn: 320134
Replace interleaved store instructions by equivalent and more efficient instructions based on latency cost model.
Https://reviews.llvm.org/D38196
llvm-svn: 320123
This reverts commit 959e37e669b0c3cfad4cb9f1f7c9261ce9f5e9ae.
That commit doesn't handle the case where main is declared rather than defined,
in particular the even-more special case where main is a prototypeless
declaration (which is of course the one actually used by musl currently).
llvm-svn: 320121
We previously only supported inserting to the LSB or MSB where it was easy to zero to perform an OR to insert.
This change effectively extracts the old value and the new value, xors them together and then xors that single bit with the correct location in the original vector. This will cancel out the old value in the first xor leaving the new value in the position.
The way I've implemented this uses 3 shifts and two xors and uses an additional register. We can avoid the additional register at the cost of another shift.
llvm-svn: 320120
Summary:
Make enum ModRefInfo an enum class. Changes to ModRefInfo values should
be done using inline wrappers.
This should prevent future bit-wise opearations from being added, which can be more error-prone.
Reviewers: sanjoy, dberlin, hfinkel, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40933
llvm-svn: 320107
It is causing sanitizer failures on llvm tests in a bootstrapped compiler. No bot link since it's currently down, but following up to get the bot up.
This reverts commit r319218.
llvm-svn: 320106
The offset overflow check before was incorrect. It would always give the
correct result, but it was comparing the SCALED potential fixed-up offset
against an UNSCALED minimum/maximum. As a result, the outliner was missing a
bunch of frame setup/destroy instructions that ought to have been safe to
outline. This fixes that, and adds an instruction to the .mir test that
failed the old test.
llvm-svn: 320090
-amdgpu-waitcnt-forcezero={1|0} Force all waitcnt instrs to be emitted as s_waitcnt vmcnt(0) expcnt(0) lgkmcnt(0)
-amdgpu-waitcnt-forceexp=<n> Force emit a s_waitcnt expcnt(0) before the first <n> instrs
-amdgpu-waitcnt-forcelgkm=<n> Force emit a s_waitcnt lgkmcnt(0) before the first <n> instrs
-amdgpu-waitcnt-forcevm=<n> Force emit a s_waitcnt vmcnt(0) before the first <n> instrs
Differential Revision: https://reviews.llvm.org/D40091
llvm-svn: 320084
There's no v2i1 or v4i1 kshift, and v8i1 is only supported with AVXDQ. Isel has fake patterns to extend these types to native shifts, but makes no guarantees about the value of any bits shifted in when shifting right.
This patch promotes the vector to a type that supports a native shift first and only allows inserting into the msb of a native sized shift.
I've constructed this in a way that doesn't do the promotion if we're going to fallback to using a xmm/ymm/zmm shuffle. I think I have a plan to remove the shuffle fall back entirely. In which case we this can be simplified, but I wanted to fix the correctness issue first.
llvm-svn: 320081
Tagged as IMUL instructions for a reasonable approximation (ALU tends to be a lot faster) - POPCNT is currently tagged as FAdd which I think should be replaced with IMUL as well
llvm-svn: 320051
WebAssembly requires caller and callee signatures to match, so the usual
C runtime trick of calling main and having it just work regardless of
whether main is defined as '()' or '(int argc, char *argv[])' doesn't
work. Extend the FixFunctionBitcasts pass to rewrite main to use the
latter form.
llvm-svn: 320041
Simply checking for register class equality will break once additional
register classes are added (as is done for the RVC instruction set extension).
llvm-svn: 320036
This patch includes all missing functionality needed to provide first
compilation of a simple program that just returns from a function.
I've added a test case that checks for "ret" instruction printed in assembly
output.
Patch by Andrei Grischenko (andrei.l.grischenko@intel.com)
Differential revision: https://reviews.llvm.org/D39688
llvm-svn: 320035
As the FPR32 and FPR64 registers have the same names, use
validateTargetOperandClass in RISCVAsmParser to coerce a parsed FPR32 to an
FPR64 when necessary. The rest of this patch is very similar to the RV32F
patch.
Differential Revision: https://reviews.llvm.org/D39895
llvm-svn: 320023
The most interesting part of this patch is probably the handling of
rounding mode arguments. Sadly, the RISC-V assembler handles floating point
rounding modes as a special "argument" when it would be more consistent to
handle them like the atomics, opcode suffixes. This patch supports parsing
this optional parameter, using InstAlias to allow parsing these floating point
instructions when no rounding mode is specified.
Differential Revision: https://reviews.llvm.org/D39893
llvm-svn: 320020
Summary:
This patch adds MachineCombiner patterns for transforming
(fsub (fmul x y) z) into (fma x y (fneg z)). This has a lower
latency on micro architectures where fneg is cheap.
Patch based on work by George Steed.
Reviewers: rengolin, joelkevinjones, joel_k_jones, evandro, efriedma
Reviewed By: evandro
Subscribers: aemerson, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40306
llvm-svn: 319980
Previously the lambda for AVX512 passed out a flag that indicated whether AVX512BW was required and that was checked against the AVX512BW subtarget flag outside.
This patch changes the interface to pass the AVX512BW subtarget bit in and return its value if we detect 16 or 8 bit types.
llvm-svn: 319919
Tabort (transaction abort) does not load from memory.
mayLoad flag removed from corresponding TABORT machine instruction.
Review: Ulrich Weigand
llvm-svn: 319905
Csmith discovered a program that caused wrong code generation with -O0:
When handling a SIGN_EXTEND in expandRxSBG(), RxSBG.BitSize may be less than
the Input width (if a truncate was previously traversed), so maskMatters()
should be called with a masked based on the width of the sign extend result
instead.
Review: Ulrich Weigand
llvm-svn: 319892
Most of the code in these routines is for handling extends from vXi1 types. The 512-bit handling for other extends is very much like the AVX2 code. So make the special routines just do vXi1 types and move the other 512-bit handling to the place that handles AVX2.
llvm-svn: 319878
As suggested by Eli Friedman, instead of aborting if an overflow check
uses something other than SETEQ or SETNE, simply do not apply the
optimization.
Differential Revision: https://reviews.llvm.org/D39147
llvm-svn: 319837
The patch originally broke Chromium (crbug.com/791714) due to its failing to
specify that the new pseudo instructions clobber EFLAGS. This commit fixes
that.
> Summary: This strengthens the guard and matches MSVC.
>
> Reviewers: hans, etienneb
>
> Subscribers: hiraditya, JDevlieghere, vlad.tsyrklevich, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D40622
llvm-svn: 319824
Summary:
The aim is to make ModRefInfo checks and changes more intuitive
and less error prone using inline methods that abstract the bit operations.
Ideally ModRefInfo would become an enum class, but that change will require
a wider set of changes into FunctionModRefBehavior.
Reviewers: sanjoy, george.burgess.iv, dberlin, hfinkel
Subscribers: nlopes, llvm-commits
Differential Revision: https://reviews.llvm.org/D40749
llvm-svn: 319821
When folding a shift into a test-under-mask comparison, make sure that
there is no loss of precision when creating the shifted comparison
value. This usually never happens, except for certain always-true
comparisons in unoptimized code.
Fixes PR35529.
llvm-svn: 319818
Surprisingly SIOptimizeExecMaskingPreRA can infinite loop
in some case with DBG_VALUE. Most tests using dbg_value are
run at -O0, so don't run this pass. This seems to only
happen when the value argument is undef.
llvm-svn: 319808
This patch, together with a matching clang patch (https://reviews.llvm.org/D39719), implements the lowering of X86 kunpack intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D39720
Change-Id: I4088d9428478f9457f6afddc90bd3d66b3daf0a1
llvm-svn: 319778
Move hardcoded itinerary out to the instruction declarations. Not sure that IIC_SSE_ALU_F32P is the best schedule for integer comparisons, but I'm not going to change it right now.
llvm-svn: 319760
Move hardcoded itinerary out to the instruction declarations. Not sure that IIC_SSE_ALU_F32P is the best schedule for integer comparisons, but I'm not going to change it right now.
llvm-svn: 319758
This has proven a healthy exercise, as many cases of incorrect instruction
flags were corrected in the process. As part of this, IntrWriteMem was added
to several SystemZ instrinsics.
Furthermore, a bug was exposed in TwoAddress with this change (as incorrect
hasSideEffects flags were removed and instructions could now be sunk), and
the test case for that bugfix (r319646) is included here as
test/CodeGen/SystemZ/twoaddr-sink.ll.
One temporary test regression (one extra copy) which will hopefully go away
in upcoming patches for similar cases:
test/CodeGen/SystemZ/vec-trunc-to-i1.ll
Review: Ulrich Weigand.
https://reviews.llvm.org/D40437
llvm-svn: 319756
MachineRegisterInfo used to allow just one regalloc hint per virtual
register. This patch extends this to a vector of regalloc hints, which is
filled in by common code with sorted copy hints. Such hints will make for
more ID copies that can be removed.
NB! This improvement is currently (and hopefully temporarily) *disabled* by
default, except for SystemZ. The only reason for this is the big impact this
has on tests, which has unfortunately proven unmanageable. It was a long
while since all the tests were updated and just waiting for review (which
didn't happen), but now targets have to enable this themselves
instead. Several targets could get a head-start by downloading the tests
updates from the Phabricator review. Thanks to those who helped, and sorry
you now have to do this step yourselves.
This should be an improvement generally for any target!
The target may still create its own hint, in which case this has highest
priority and is stored first in the vector. If it has target-type, it will
not be recomputed, as per the previous behaviour.
The temporary hook enableMultipleCopyHints() will be removed as soon as all
targets return true.
Review: Quentin Colombet, Ulrich Weigand.
https://reviews.llvm.org/D38128
llvm-svn: 319754
When trying to determine the correct Mask register class corresponding
to a GPR register class, not all register classes were handled.
This caused an assertion to be raised on some scenarios.
Differential Revision:
https://reviews.llvm.org/D40290
llvm-svn: 319745
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319740
This calls handleMove with a DBG_VALUE instruction,
which isn't tracked by LiveIntervals. I'm not sure
this is the correct place to fix this. The generic
scheduler seems to have more deliberate region
selection that skips dbg_value.
The test is also really hard to reduce. I haven't been able
to figure out what exactly causes this particular case to
try moving the dbg_value.
llvm-svn: 319732
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319728
The getConstant function can take care of creating the APInt internally.
getZeroVector will take care of using the correct type for the build vector to avoid re-lowering.
The test change here is because execution domain constraints apparently pass through undef inputs of a zeroing xor. So the different ordering of register allocation here caused the dependency to change.
llvm-svn: 319725
Move the AVX512 code out of LowerAVXExtend. LowerAVXExtend has two callers but one of them pre-checks for AVX-512 so the code is only live from the other caller. So move the AVX-512 checks up to that caller for symmetry.
Move all of the i1 input type code in Lower_AVX512ZeroExend together.
llvm-svn: 319724
It's not implemented.
Passing +fp64-fp16-denormal feature enables fp64 even on asics that don't support it
v2: fix hasFP64 query
Differential Revision: https://reviews.llvm.org/D39931
llvm-svn: 319709
Move the entire optimization to one place. Before it was possible
to adjust dmask without changing the register class of the output
instruction, since they were done in separate places. Fix all
lane sizes and move all of the optimization into the DAG folding.
llvm-svn: 319705
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
Summary:
The compiler fails with the following error message:
fatal error: error in backend: ran out of registers during
register allocation
Tail call optimization for Armv8-M.base fails to meet all the required
constraints when handling calls to function pointers where the
arguments take up r0-r3. This is because the pointer to the
function to be called can only be stored in r0-r3, but these are
all occupied by arguments. This patch makes sure that tail call
optimization does not try to handle this type of calls.
Reviewers: chill, MatzeB, olista01, rengolin, efriedma
Reviewed By: olista01, efriedma
Subscribers: efriedma, aemerson, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40706
llvm-svn: 319664
PTX requires that identifiers consist only of [a-zA-Z0-9_$]. The
existing pass already ensured this for globals and this patch adds
the cleanup for functions with local linkage.
However, there was a different problem in the case of collisions
of the adjusted name: The ValueSymbolTable then automatically
appended ".N" with increasing Ns to get a unique name while helping
the ABI demangling. Special case this behavior to omit the dots and
append N directly. This will always give us legal names according
to the PTX requirements.
Differential Revision: https://reviews.llvm.org/D40573
llvm-svn: 319657
This is causing a failure in the llvm-clang-x86_64-expensive-checks-win
buildbot, and I can't reproduce it locally, so reverting until I can work out
what is wrong.
llvm-svn: 319654
Summary:
The pass that inserts s_waitcnt instructions where needed propagated
info used to track dependencies for each block by iterating over the
predecessor blocks. The iteration was terminated when a predecessor
that had not yet been processed was encountered. Any info in blocks
later in the list was therefore not processed, leading to the
possiblility of a required s_waitcnt not being inserted.
The fix is simply to change the "break" to "continue" for the
relevant loops, so that all visited blocks are processed. This
is likely what was intended when the code was written.
There is no test case provided for this fix because:
1) the only example that reproduces this is large and resistant to
being reduced
2) the change is trivial
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D40544
llvm-svn: 319651
This adds a "invalid operands for instruction" diagnostic for
instructions where there is an instruction encoding with the correct
mnemonic and which is available for this target, but where multiple
operands do not match those which were provided. This makes it clear
that there is some combination of operands that is valid for the current
target, which the default diagnostic of "invalid instruction" does not.
Since this is a very general error, we only emit it if we don't have a
more specific error.
Differential revision: https://reviews.llvm.org/D36747
llvm-svn: 319649
This matches how it is done on X86.
This allows using emulated tls on windows; in MinGW environments,
native tls isn't supported at the moment.
Set the right Data*bitsDirective for windows to match the existing
tests for other platforms. Make parts of the existing tests a regex,
to allow matching .section .rdata for windows, to avoid having to
duplicate the rest of the tests for windows.
Differential Revision: https://reviews.llvm.org/D40770
llvm-svn: 319644
This matches how it is done on X86.
This allows using emulated tls on windows; in MinGW environments,
native tls isn't supported at the moment.
Differential Revision: https://reviews.llvm.org/D40769
llvm-svn: 319643
These instructions can be used by widening to 512-bits and extracting back to 128/256. We do similar to several other instructions already.
llvm-svn: 319641
We already do this as a DAG combine. The version during lowering can only trigger if known bits changes something that improves known bits analysis. But this means we should be improving known bits analysis to work on the unlowered form instead.
llvm-svn: 319640
Makes it easier to grok where each is supposed to be used, mainly useful for adding to the AVX512 instructions but hopefully can be used more in SSE/AVX as well.
llvm-svn: 319614
Summary:
1/ Operand folding during complex pattern matching for LEAs has been extended, such that it promotes Scale to
accommodate similar operand appearing in the DAG e.g.
T1 = A + B
T2 = T1 + 10
T3 = T2 + A
For above DAG rooted at T3, X86AddressMode will now look like
Base = B , Index = A , Scale = 2 , Disp = 10
2/ During OptimizeLEAPass down the pipeline factorization is now performed over LEAs so that if there is an opportunity
then complex LEAs (having 3 operands) could be factored out e.g.
leal 1(%rax,%rcx,1), %rdx
leal 1(%rax,%rcx,2), %rcx
will be factored as following
leal 1(%rax,%rcx,1), %rdx
leal (%rdx,%rcx) , %edx
3/ Aggressive operand folding for AM based selection for LEAs is sensitive to loops, thus avoiding creation of any complex LEAs within a loop.
4/ Simplify LEA converts (lea (BASE,1,INDEX,0) --> add (BASE, INDEX) which offers better through put.
PR32755 will be taken care of by this pathc.
Previous patch revisions : r313343 , r314886
Reviewers: lsaba, RKSimon, craig.topper, qcolombet, jmolloy, jbhateja
Reviewed By: lsaba, RKSimon, jbhateja
Subscribers: jmolloy, spatel, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35014
llvm-svn: 319543
Summary: LegalizerInfo assumes all G_MERGE_VALUES and G_UNMERGE_VALUES instructions are legal, so it is not possible to legalize vector operations on illegal vector types. This patch fixes the problem by removing the related check and adding default actions for G_MERGE_VALUES and G_UNMERGE_VALUES.
Reviewers: qcolombet, ab, dsanders, aditya_nandakumar, t.p.northover, kristof.beyls
Reviewed By: dsanders
Subscribers: rovka, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39823
llvm-svn: 319524
The default legalization for v2i32 is promotion to v2i64. This results in a gather that reads 64-bit elements rather than 32. If one of the elements is near a page boundary this can cause an illegal access that can fault.
We also miscalculate the scale for the gather which is an even worse problem, but we probably could have found a separate way to fix that.
llvm-svn: 319521
These command line options are not intended for public use, and often
don't even make sense in the context of a particular tool anyway. About
90% of them are already hidden, but when people add new options they
forget to hide them, so if you were to make a brand new tool today, link
against one of LLVM's libraries, and run tool -help you would get a
bunch of junk that doesn't make sense for the tool you're writing.
This patch hides these options. The real solution is to not have
libraries defining command line options, but that's a much larger effort
and not something I'm prepared to take on.
Differential Revision: https://reviews.llvm.org/D40674
llvm-svn: 319505
G_ATOMICRMW_* is generally legal on AArch64. The exception is G_ATOMICRMW_NAND.
G_ATOMIC_CMPXCHG_WITH_SUCCESS needs to be lowered to G_ATOMIC_CMPXCHG with an
external comparison.
Note that IRTranslator doesn't generate these instructions yet.
llvm-svn: 319466
output
As part of the unification of the debug format and the MIR format,
always use `printReg` to print all kinds of registers.
Updated the tests using '_' instead of '%noreg' until we decide which
one we want to be the default one.
Differential Revision: https://reviews.llvm.org/D40421
llvm-svn: 319445
This re-commits everything that was pulled in r314244. The transformation
is off by default (patch to enable it to follow). The code is refactored
to have a single entry-point and provide fine-grained control over patterns
that it selects. This patch also fixes the bugs in the original code.
Everything that failed with the original patch has been re-tested with this
patch (with the transformation turned on). So the patch to turn this on is
soon to follow.
Differential Revision: https://reviews.llvm.org/D38575
llvm-svn: 319434
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
llvm-svn: 319427
Csmith generated a program where a store after load to the same address did
not get chained after the new load created during DAG legalizing, and so
performed an illegal overwrite of the expected value.
When the new zero-extending load is created, the chain users of the original
load must be updated, which was not done previously.
A similar case was also found and handled in lowerBITCAST.
Review: Ulrich Weigand
https://reviews.llvm.org/D40542
llvm-svn: 319409
Normal type legalization will widen everything. This requires forcing 0s into the mask register. We can instead choose the form that only reads 2 elements without zeroing the mask.
llvm-svn: 319406
GFX9 does not enable bounds checking for the resource descriptors
used for private access, so it should be OK to use vaddr with
a potentially negative value.
llvm-svn: 319393
- add -ppc-reg-with-percent-prefix option to use %r3 etc as register
names
- split off logic for Darwinish verbose conditional codes into a helper
function
- be explicit about Darwin vs AIX vs GNUish assembler flavors
Based on the patch from Alexandre Yukio Yamashita
Differential Revision: https://reviews.llvm.org/D39016
llvm-svn: 319381
Partially reverting enabling of post-legalization store merge
(r319036) for just ARM backend as it is causing incorrect code
in some Thumb2 cases.
llvm-svn: 319331
When lowering a G_BRCOND, we generate a TSTri of the condition against
1, which sets the flags, and then a Bcc which branches based on the
value of the flags.
Unfortunately, we were using the wrong condition code to check whether
we need to branch (EQ instead of NE), which caused all our branches to
do the opposite of what they were intended to do. This patch fixes the
issue by using the correct condition code.
llvm-svn: 319313
When translating pseudo to MC, v_add/sub/subrev_u32 shall be mapped via a separate table as GFX8 has opcodes with the same names.
These instructions shall also be labelled as renamed for pseudoToMCOpcode to handle them correctly.
Reviewers: arsenm
Differential Revision: https://reviews.llvm.org/D40550
llvm-svn: 319311
This will allow compilation of assembly files targeting armv7e-m without having
to specify the Tag_CPU_arch attribute as a workaround.
Differential revision: https://reviews.llvm.org/D40370
Patch by Ian Tessier!
llvm-svn: 319303
Separate the handling of AND/AND8 out from PHI/OR/ISEL checking. The reasoning
is the others need all their operands to be sign/zero extended for their output
to also be sign/zero extended. This is true for AND and sign-extension, but for
zero-extension we only need at least one of the input operands to be zero
extended for the result to also be zero extended.
Differential Revision: https://reviews.llvm.org/D39078
llvm-svn: 319289
The object can't straddle the address space
wrap around, so I think it's OK to assume any
offsets added to the base object pointer can't
overflow. Similar logic already appears to be
applied in SelectionDAGBuilder when lowering
aggregate returns.
llvm-svn: 319272
GFX9 stopped using m0 for most DS instructions. Select
a different instruction without the use. I think this will
be less error prone than trying to manually maintain m0
uses as needed.
llvm-svn: 319270
Previously we had an isel pattern to add the truncate. Instead use Promote to add the truncate to the DAG before isel.
The Promote legalization code had to be updated to prevent an infinite loop if promotion took multiple steps because it wasn't remembering the previously tried value.
llvm-svn: 319259
The IRTranslator cannot generate these instructions at the moment so there's no
issue with not having implemented ISel for them yet. D40092 will add
G_ATOMIC_CMPXCHG_WITH_SUCCESS and G_ATOMICRMW_* to the IRTranslator and a
further patch will add support for lowering G_ATOMIC_CMPXCHG_WITH_SUCCESS into
G_ATOMIC_CMPXCHG with an external success check via the `Lower` action.
The separation of G_ATOMIC_CMPXCHG_WITH_SUCCESS and G_ATOMIC_CMPXCHG is
to import SelectionDAG rules while still supporting targets that prefer to
custom lower the original LLVM-IR-like operation.
llvm-svn: 319216
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
Generalize FixFunctionBitcasts to handle varargs functions. This in
particular fixes the case where clang bitcasts away a varargs when
calling a K&R-style function.
This avoids interacting with tricky ABI details because it operates
at the LLVM IR level before varargs ABI details are exposed.
This fixes PR35385.
llvm-svn: 319186
Looking through Agner, FTST is very similar to generic float compare behaviour, so I've added them to the existing IIC_FCOMI (WriteFAdd) tags.
llvm-svn: 319184
Atom's FABS/FCHS/FSQRT latencies taken from Agner.
Note: I just added FSIN and FCOS to the existing IIC_FSINCOS itinerary, which is actually a more costly instruction.
llvm-svn: 319175
This is needed for cases when the memory access is not as big as the width of
the data type. For instance, storing i1 (1 bit) would be done in a byte (8
bits).
Using 'BitSize >> 3' (or '/ 8') would e.g. give the memory access of an i1 a
size of 0, which for instance makes alias analysis return NoAlias even when
it shouldn't.
There are no tests as this was done as a follow-up to the bugfix for the case
where this was discovered (r318824). This handles more similar cases.
Review: Björn Petterson
https://reviews.llvm.org/D40339
llvm-svn: 319173
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
llvm-svn: 319168
Summary:
The entire algorithm operates per basic-block, so for cache locality
it should be better to re-optimize a basic-block immediately rather than
in a separate loop.
I don't have performance measurements.
Change-Id: I85106570bd623c4ff277faaa50ee43258e1ddcc5
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D40344
llvm-svn: 319156
Summary:
The PeepholeOptimizer pass calls this function solely based on checking
DefMI->isMoveImmediate(), which only checks the MoveImm bit of the
instruction description. So it's up to FoldImmediate itself to properly
check that DefMI *actually* moves from an immediate.
I don't have a separate test case for this, but the next patch introduces
a test case which happens to crash without this change.
This error is caught by the assertion in MachineOperand::getImm().
Change-Id: I88e7cdbcf54d75e1a296822e6fe5f9a5f095bbf8
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D40342
llvm-svn: 319155
This adds code to protect WebAssembly's `trunc_s` family of opcodes
from values outside their domain. Even though such conversions have
full undefined behavior in C/C++, LLVM IR's `fptosi` and `fptoui` do
not, and only return undef.
This also implements the proposed non-trapping float-to-int conversion
feature and uses that instead when available.
llvm-svn: 319128
These lines all exist identically either under SSE2, AVX2 or AVX512. Given that VLX implies all of those, these aren't providing anything new.
llvm-svn: 319124
Which VTs are considered simple is determined by the superset of the legal types of all targets in LLVM. If we're looking at VTs that are going to be split down to 512-bits we should allow any VT not just simple ones since the simple list changes over time as new targets are added.
llvm-svn: 319110
We don't do this for narrow vectors under AVX or SSE features. We also don't set them to Expand like we do for many vectors op. Nor does TargetLoweringBase.cpp. This leads me to believe these default to Legal.
llvm-svn: 319103
This patch adds a peep hole optimization to remove any redundant toc save
instructions added as part of the call sequence for indirect calls. It removes
any toc saves within a function that are dominated by another toc save.
Differential Revision: https://reviews.llvm.org/D39736
llvm-svn: 319087
I don't have a good test case for this at the moment. I was playing around with a change in legalizing and triggered this code to produce a PSHUFD with sse1 only.
llvm-svn: 319066
Similar for vXi16/vXi8 with BWI.
Any vector larger than 512 bits will be split to 512 bits during legalization. But without this we will fold sexts with them before that making it difficult to recover leading to scalarization.
llvm-svn: 319059
This patch extends on to rL307174 to not use the power9 vector extract with
variable index instructions when extracting word element 1. For such cases,
the existing selection of MFVSRWZ provides a better sequence.
Differential Revision: https://reviews.llvm.org/D38287
llvm-svn: 319049
Summary:
Now that store-merge is only generates type-safe stores, do a second
pass just before instruction selection to allow lowered intrinsics to
be merged as well.
Reviewers: jyknight, hfinkel, RKSimon, efriedma, rnk, jmolloy
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33675
llvm-svn: 319036
Make the print format consistent with other assembler instructions.
Adding a tab character instead of space in asmstring of Ext and Ins
instructions.
Removing space around the tab character for JALRC and replacing space with
tab in JRC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38144
llvm-svn: 319030
AMDGPU backend errors with "unsupported call to function" upon
encountering a call to llvm.log{,10}.{f16,f32} intrinsics. This patch
adds custom lowering to avoid that error on both R600 and SI.
Reviewers: arsenm, jvesely
Subscribers: tstellar
Differential Revision: https://reviews.llvm.org/D29942
llvm-svn: 319025
As mentioned on PR17367, many instructions are missing scheduling tags preventing us from setting 'CompleteModel = 1' for better instruction analysis. This patch deals with FMA/FMA4 which is one of the bigger offenders (along with AVX512 in general).
Annoyingly all scheduler models need to define WriteFMA (now that its actually used), even for older targets without FMA/FMA4 support, but that is an existing problem shared by other schedule classes.
Differential Revision: https://reviews.llvm.org/D40351
llvm-svn: 319016
The commit https://reviews.llvm.org/rL318143 computes incorrectly to offset to
restore LR from.
The number of tPOP operands is 2 (condition) + 2 (implicit def and use of SP) +
count of the popped registers. We need to load LR from just past the last
register, hence the correct offset should be either getNumOperands() - 4 and
getNumExplicitOperands() - 2 (multiplied by 4).
Differential revision: https://reviews.llvm.org/D40305
llvm-svn: 319014
Shadow stack solution introduces a new stack for return addresses only.
The HW has a Shadow Stack Pointer (SSP) that points to the next return address.
If we return to a different address, an exception is triggered.
The shadow stack is managed using a series of intrinsics that are introduced in this patch as well as the new register (SSP).
The intrinsics are mapped to new instruction set that implements CET mechanism.
The patch also includes initial infrastructure support for IBT.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40223
Change-Id: I4daa1f27e88176be79a4ac3b4cd26a459e88fed4
llvm-svn: 318996
Summary:
These instructions zero the non-scalar part of the lower 128-bits which makes them different than the FMA3 instructions which pass through the non-scalar part of the lower 128-bits.
I've only added fmadd because we should be able to derive all other variants using operand negation in the intrinsic header like we do for AVX512.
I think there are still some missed negate folding opportunities with the FMA4 instructions in light of this behavior difference that I hadn't noticed before.
I've split the tests so that we can use different intrinsics for scalar testing between the two. I just copied the tests split the RUN lines and changed out the scalar intrinsics.
fma4-fneg-combine.ll is a new test to make sure we negate the fma4 intrinsics correctly though there are a couple TODOs in it.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39851
llvm-svn: 318984
Summary:
This adds a new fast gather feature bit to cover all CPUs that support fast gather that we can use independent of whether the AVX512 feature is enabled. I'm only using this new bit to qualify AVX2 codegen. AVX512 is still implicitly assuming fast gather to keep tests working and to match the scatter behavior.
Test command lines have been added for these two cases.
Reviewers: magabari, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40282
llvm-svn: 318983
v4i32 isn't a legal type with sse1 only and would end up getting scalarized otherwise.
This isn't completely ideal as it doesn't handle cases like v8i32 that would get split to v4i32. But it at least helps with code written using the clang intrinsic header.
llvm-svn: 318967
This optimization can occur after type legalization and emit a vselect with v4i32 type. But that type is not legal with sse1. This ultimately gets scalarized by the second type legalization that runs after vector op legalization, but that's really intended to handle the scalar types that might be introduced by legalizing vector ops.
For now just stop this from happening by disabling the optimization with sse1.
llvm-svn: 318965
This patch fixes an issue where microMIPS ASE flag is not set
when a function has micromips attribute or when .set micromips
directive is used.
Differential Revision: https://reviews.llvm.org/D40316
llvm-svn: 318948
The NewCC variable is calculated outside of the loop that processes jcc/setcc/cmovcc instructions. If we invert it during the loop it can cause an incorrect value to be used by a later iteration. Instead only read it during the loop and use a new variable to store the possibly inverted value.
Fixes PR35399.
llvm-svn: 318934
(V)PHMINPOSUW determines the UMIN element in an v8i16 input, with suitable bit flipping it can also be used for SMAX/SMIN/UMAX cases as well.
This patch matches vXi16 SMAX/SMIN/UMAX/UMIN horizontal reductions and reduces the input down to a v8i16 vector before calling (V)PHMINPOSUW.
A later patch will use this for v16i8 reductions as well (PR32841).
Differential Revision: https://reviews.llvm.org/D39729
llvm-svn: 318917
TableGen already generates code for selecting a G_FDIV, so we only need
to add a test.
For the legalizer and reg bank select, we do the same thing as for the
other floating point binary operations: either mark as legal if we have
a FP unit or lower to a libcall, and map to the floating point
registers.
llvm-svn: 318915
TableGen already generates code for selecting a G_FMUL, so we only need
to add a test for that part.
For the legalizer and reg bank select, we do the same thing as the other
floating point binary operators: either mark as legal if we have a FP
unit or lower to a libcall, and map to the floating point registers.
llvm-svn: 318910
The MIPS delay slot filler converts delay slot branches into compact
forms for the MIPS ISAs which support them. For branches that compare
(in)equality with with zero, it converts them into branches with implict
zero register operands. These branches have a slightly greater range
than normal two register operands branches.
Changing the branches at this point in the pipeline offers the long
branch pass the ability to mark better judgements if a long branch
sequence is required.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D40314
llvm-svn: 318908
This patch reverts change to X86TargetLowering::getScalarShiftAmountTy in
rL318727 and move the logic to DAGTypeLegalizer::SplitInteger.
The reason is that getScalarShiftAmountTy returns a shift amount type that
is suitable for common use cases in CodeGen. DAGTypeLegalizer::SplitInteger
is a rare situation which requires a shift amount type larger than what
getScalarShiftAmountTy. In this case, it is more reasonable to do special
handling of shift amount type in DAGTypeLegalizer::SplitInteger only. If
similar situations arises the logic may be moved to a separate function.
Differential Revision: https://reviews.llvm.org/D40320
llvm-svn: 318890
Change LowerBUILD_VECTOR to use those functions. This commit will tempora-
rily affect constant vector generation (it will generate constant-extended
values instead of non-extended combines), but the code for the general case
should be better. The constant selection part will be fixed later.
llvm-svn: 318877
SITargetLowering::LowerCall uses dummy pointer info for byval argument, which causes
flat load instead of buffer load.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40040
llvm-svn: 318844
Summary:
This bug seems to have gone unnoticed because critical cases with LDS
instructions are eliminated by the peephole optimizer.
However, equivalent situations arise with buffer loads and stores
as well, so this fixes regressions since r317751 ("AMDGPU: Merge
S_BUFFER_LOAD_DWORD_IMM into x2, x4").
Fixes at least:
KHR-GL45.shader_storage_buffer_object.basic-operations-case1-cs
KHR-GL45.cull_distance.functional
piglit tes-input-gl_ClipDistance.shader_test
... and probably more
Change-Id: I0e371536288eb8e6afeaa241a185266fd45d129d
Reviewers: arsenm, mareko, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D40303
llvm-svn: 318829
This makes the fact that X86 needs an explicit mask output not part of the type constraint for the ISD::MSCATTER.
This also gives the X86ISD::MGATHER/MSCATTER nodes a common base class simplifying the address selection code in X86ISelDAGToDAG.cpp
llvm-svn: 318823
Now we consistently represent the mask result without relying on isel ignoring it.
We now have a more general SDNode and type constraints to represent these nodes in isel patterns. This allows us to present both both vXi1 and XMM/YMM mask types with a single set of constraints.
llvm-svn: 318821
This is based on table 1-1 of the October 2017 revision of Intel® Architecture Instruction Set Extensions and Future Features Programming Reference
llvm-svn: 318799
This partially reverts r298851. The the underlying issue is that we don't
currently model the dependency between mrs (read system register) and
msr (write system register) instructions.
Something like the below should never be reordered:
msr TPIDR_EL0, x0 ;; set thread pointer
mrs x8, TPIDR_EL0 ;; read thread pointer
but was being reordered after r298851. The functional part of the patch
that wasn't reverted needed to remain in place in order to not break
r299462.
PR35317
llvm-svn: 318788
These are pre-UAL syntax, and we don't support any other pre-UAL instructions,
with the exception of FLDMX/FSTMX, which don't have a UAL equivalent. Therefore
there's no reason to keep them or their AsmParser hacks around.
With the AsmParser hacks removed, the FLDMX and FSTMX instructions get the same
operand diagnostics as the UAL instructions.
Differential revision: https://reviews.llvm.org/D39196
llvm-svn: 318777
This was causing the (invalid) predicated versions of the NEON VRINTX and
VRINTZ instructions to be accepted, with the condition code being ignored.
Also, there is no NEON VRINTR instruction, so that part of the check was not
necessary.
Differential revision: https://reviews.llvm.org/D39193
llvm-svn: 318771
- We can still emit this error if the actual instruction has two or more
operands missing compared to the expected one.
- We should only emit this error once per instruction.
Differential revision: https://reviews.llvm.org/D36746
llvm-svn: 318770
As pointed out in post-commit review of r318738, `return ReplaceNode(..)` when
both ReplaceNode and the current function return void is confusing. This patch
moves to using a more obvious early return, and moves to just using an if to
catch the one case we currently care about. A future patch that adds further
custom instruction selection can introduce a switch.
llvm-svn: 318757
The obvious approach of defining a pattern like the one below actually doesn't
work:
`def : Pat<(i32 0), (i32 X0)>;`
As was noted when Lanai made this change (https://reviews.llvm.org/rL288215),
attempting to handle the constant 0 in tablegen leads to assertions due to a
physical register being used where a virtual register is expected.
llvm-svn: 318738
Previous patches primarily ensured that codegen was possible for the standard
RISC-V instructions. However, there are a number of IR inputs that wouldn't be
appropriately lowered. This patch both adds test cases and supports lowering
for a number of these cases:
* Improved sext/zext/trunc support
* Support for setcc variants that don't map directly to RISC-V instructions
* Lowering mul, and hence support for external symbols
* addc, adde, subc, sube
* mulhs, srem, mulhu, urem, udiv, sdiv
* {srl,sra,shl}_parts
* brind
* br_jt
* bswap, ctlz, cttz, ctpop
* rotl, rotr
* BlockAddress operands
Differential Revision: https://reviews.llvm.org/D29938
llvm-svn: 318737
Although ISD::SELECT_CC is a more natural match for RISCVISD::SELECT_CC (and
ultimately the integer RISC-V conditional branch instructions), we choose to
expand ISD::SELECT_CC and lower ISD::SELECT. The appropriate compare+branch
will be created in the case where an ISD::SELECT condition value is created by
an ISD::SETCC node, which operates on XLen types. Other datatypes such as
floating point don't have conditional branch instructions, and lowering
ISD::SELECT allows more flexibility for handling these cases.
Differential Revision: https://reviews.llvm.org/D29937
llvm-svn: 318735
We don't need separate 32 and 64 node types. We can use SDTCisInt and SDTCisSameSizeAs to ensure the mask size the result type and is integer.
llvm-svn: 318732
DAGTypeLegalizer::SplitInteger uses default pointer size as shift amount constant type,
which causes less performant ISA in amdgcn---amdgiz target since the default pointer
type is i64 whereas the desired shift amount type is i32.
This patch fixes that by using TLI.getScalarShiftAmountTy in DAGTypeLegalizer::SplitInteger.
The X86 change is necessary since splitting i512 requires shifting amount of 256, which
cannot be held by i8.
Differential Revision: https://reviews.llvm.org/D40148
llvm-svn: 318727
Initialize IsVis2 and IsVis3 in SparcSubtarget::initializeSubtargetDependencies.
MSan detected uninitialized read of IsVis3 after r318704. Initializing the
variables to false will prevent undefined behavior.
llvm-svn: 318724
Summary:
while investigating performance degradation of imagick benchmark
there were found inefficient pattern for UINT_TO_FP conversion.
That pattern causes RAW hazard in assembly code. Specifically,
uitofp IR operator results in poor assembler :
st %i0, [%fp - 952]
ldd [%fp - 952], %f0
it stores 32-bit integer register into memory location and then
loads 64-bit floating point data from that location.
That is exactly RAW hazard case. To optimize that case it is
possible to use SPISD::ITOF and SPISD::XTOF for conversion from
integer to floating point data type and to use ISD::BITCAST to
copy from integer register into floating point register.
The fix is to write custom UINT_TO_FP pattern using SPISD::ITOF,
SPISD::XTOF, ISD::BITCAST.
Patch by Alexey Lapshin
Reviewers: fedor.sergeev, jyknight, dcederman, lero_chris
Reviewed By: jyknight
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36875
llvm-svn: 318704
Move the hazard scheduling pass to after the long branch pass, as the
long branch pass can create forbiddden slot hazards. Rather than complicating
the implementation of the long branch pass to handle forbidden slot hazards,
just reorder the passes.
llvm-svn: 318657
The VSX versions have the advantage of a full 64-register target whereas the FP
ones have the advantage of lower latency and higher throughput. So what we’re
after is using the faster instructions in low register pressure situations and
using the larger register file in high register pressure situations.
The heuristic chooses between the following 7 pairs of instructions.
PPC::LXSSPX vs PPC::LFSX
PPC::LXSDX vs PPC::LFDX
PPC::STXSSPX vs PPC::STFSX
PPC::STXSDX vs PPC::STFDX
PPC::LXSIWAX vs PPC::LFIWAX
PPC::LXSIWZX vs PPC::LFIWZX
PPC::STXSIWX vs PPC::STFIWX
Differential Revision: https://reviews.llvm.org/D38486
llvm-svn: 318651
Summary:
This patch fixes an issue so that the right alias is printed when the instruction has tied operands. It checks the number of operands in the resulting instruction as opposed to the alias, and then skips over tied operands that should not be printed in the alias.
This allows to generate the preferred assembly syntax for the AArch64 'ins' instruction, which should always be displayed as 'mov' according to the ARM Architecture Reference Manual. Several unit tests have changed as a result, but only to reflect the preferred disassembly. Some other InstAlias patterns (movk/bic/orr) needed a slight adjustment to stop them becoming the default and breaking other unit tests.
Please note that the patch is mostly the same as https://reviews.llvm.org/D29219 which was reverted because of an issue found when running TableGen with the Address Sanitizer. That issue has been addressed in this iteration of the patch.
Reviewers: rengolin, stoklund, huntergr, SjoerdMeijer, rovka
Reviewed By: rengolin, SjoerdMeijer
Subscribers: fhahn, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D40030
llvm-svn: 318650
kernel verifier is becoming smarter and soon will support
direct and indirect function calls.
Remove obsolete error from BPF backend.
Make call to use PCRel_4 fixup.
'bpf to bpf' calls are distinguished from 'bpf to kernel' calls
by insn->src_reg == BPF_PSEUDO_CALL == 1 which is used as relocation
indicator similar to ld_imm64->src_reg == BPF_PSEUDO_MAP_FD == 1
The actual 'call' instruction remains the same for both
'bpf to kernel' and 'bpf to bpf' calls.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 318614
We don't need a dyn_cast, the predicate already specified the base node. We only need to check the type of the index, the base ptr is guaranteed to be scalar.
llvm-svn: 318596
This makes sure that functions that only clobber xmm registers
(on win64) also get the right cfi directives, if dwarf exceptions
are enabled.
Differential Revision: https://reviews.llvm.org/D40191
llvm-svn: 318591
We used to detect loads feeding fp instructions, but we were
failing to take into account cases where this happens through copies.
For instance, loads can fed copies coming from the ABI lowering
of floating point arguments/results.
llvm-svn: 318589
We used to detect that stores were fed by fp instructions, but we were
failing to take into account cases where this happens through copies.
For instance, stores can be fed by copies coming from the ABI lowering
of floating point arguments.
llvm-svn: 318588
This is mostly moving VMEM clause breaking into
the hazard recognizer. Also move another hazard
currently handled in the waitcnt pass.
Also stops breaking clauses unless xnack is enabled.
llvm-svn: 318557
Enabling and using dwarf exceptions seems like an easier path
to take, than to make the COFF/ARM backend output EHABI directives.
Previously, no EH model was enabled at all on this target.
There's no point in setting UseIntegratedAssembler to false since
GNU binutils doesn't support Windows on ARM, and since we don't
need to support external assembler, we don't need to use register
numbers in cfi directives.
Differential Revision: https://reviews.llvm.org/D39532
llvm-svn: 318510
Craig Topper