The getConstant function can take care of creating the APInt internally.
getZeroVector will take care of using the correct type for the build vector to avoid re-lowering.
The test change here is because execution domain constraints apparently pass through undef inputs of a zeroing xor. So the different ordering of register allocation here caused the dependency to change.
llvm-svn: 319725
Move the AVX512 code out of LowerAVXExtend. LowerAVXExtend has two callers but one of them pre-checks for AVX-512 so the code is only live from the other caller. So move the AVX-512 checks up to that caller for symmetry.
Move all of the i1 input type code in Lower_AVX512ZeroExend together.
llvm-svn: 319724
It's not implemented.
Passing +fp64-fp16-denormal feature enables fp64 even on asics that don't support it
v2: fix hasFP64 query
Differential Revision: https://reviews.llvm.org/D39931
llvm-svn: 319709
Move the entire optimization to one place. Before it was possible
to adjust dmask without changing the register class of the output
instruction, since they were done in separate places. Fix all
lane sizes and move all of the optimization into the DAG folding.
llvm-svn: 319705
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
Summary:
The compiler fails with the following error message:
fatal error: error in backend: ran out of registers during
register allocation
Tail call optimization for Armv8-M.base fails to meet all the required
constraints when handling calls to function pointers where the
arguments take up r0-r3. This is because the pointer to the
function to be called can only be stored in r0-r3, but these are
all occupied by arguments. This patch makes sure that tail call
optimization does not try to handle this type of calls.
Reviewers: chill, MatzeB, olista01, rengolin, efriedma
Reviewed By: olista01, efriedma
Subscribers: efriedma, aemerson, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40706
llvm-svn: 319664
PTX requires that identifiers consist only of [a-zA-Z0-9_$]. The
existing pass already ensured this for globals and this patch adds
the cleanup for functions with local linkage.
However, there was a different problem in the case of collisions
of the adjusted name: The ValueSymbolTable then automatically
appended ".N" with increasing Ns to get a unique name while helping
the ABI demangling. Special case this behavior to omit the dots and
append N directly. This will always give us legal names according
to the PTX requirements.
Differential Revision: https://reviews.llvm.org/D40573
llvm-svn: 319657
This is causing a failure in the llvm-clang-x86_64-expensive-checks-win
buildbot, and I can't reproduce it locally, so reverting until I can work out
what is wrong.
llvm-svn: 319654
Summary:
The pass that inserts s_waitcnt instructions where needed propagated
info used to track dependencies for each block by iterating over the
predecessor blocks. The iteration was terminated when a predecessor
that had not yet been processed was encountered. Any info in blocks
later in the list was therefore not processed, leading to the
possiblility of a required s_waitcnt not being inserted.
The fix is simply to change the "break" to "continue" for the
relevant loops, so that all visited blocks are processed. This
is likely what was intended when the code was written.
There is no test case provided for this fix because:
1) the only example that reproduces this is large and resistant to
being reduced
2) the change is trivial
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D40544
llvm-svn: 319651
This adds a "invalid operands for instruction" diagnostic for
instructions where there is an instruction encoding with the correct
mnemonic and which is available for this target, but where multiple
operands do not match those which were provided. This makes it clear
that there is some combination of operands that is valid for the current
target, which the default diagnostic of "invalid instruction" does not.
Since this is a very general error, we only emit it if we don't have a
more specific error.
Differential revision: https://reviews.llvm.org/D36747
llvm-svn: 319649
This matches how it is done on X86.
This allows using emulated tls on windows; in MinGW environments,
native tls isn't supported at the moment.
Set the right Data*bitsDirective for windows to match the existing
tests for other platforms. Make parts of the existing tests a regex,
to allow matching .section .rdata for windows, to avoid having to
duplicate the rest of the tests for windows.
Differential Revision: https://reviews.llvm.org/D40770
llvm-svn: 319644
This matches how it is done on X86.
This allows using emulated tls on windows; in MinGW environments,
native tls isn't supported at the moment.
Differential Revision: https://reviews.llvm.org/D40769
llvm-svn: 319643
These instructions can be used by widening to 512-bits and extracting back to 128/256. We do similar to several other instructions already.
llvm-svn: 319641
We already do this as a DAG combine. The version during lowering can only trigger if known bits changes something that improves known bits analysis. But this means we should be improving known bits analysis to work on the unlowered form instead.
llvm-svn: 319640
Makes it easier to grok where each is supposed to be used, mainly useful for adding to the AVX512 instructions but hopefully can be used more in SSE/AVX as well.
llvm-svn: 319614
Summary:
1/ Operand folding during complex pattern matching for LEAs has been extended, such that it promotes Scale to
accommodate similar operand appearing in the DAG e.g.
T1 = A + B
T2 = T1 + 10
T3 = T2 + A
For above DAG rooted at T3, X86AddressMode will now look like
Base = B , Index = A , Scale = 2 , Disp = 10
2/ During OptimizeLEAPass down the pipeline factorization is now performed over LEAs so that if there is an opportunity
then complex LEAs (having 3 operands) could be factored out e.g.
leal 1(%rax,%rcx,1), %rdx
leal 1(%rax,%rcx,2), %rcx
will be factored as following
leal 1(%rax,%rcx,1), %rdx
leal (%rdx,%rcx) , %edx
3/ Aggressive operand folding for AM based selection for LEAs is sensitive to loops, thus avoiding creation of any complex LEAs within a loop.
4/ Simplify LEA converts (lea (BASE,1,INDEX,0) --> add (BASE, INDEX) which offers better through put.
PR32755 will be taken care of by this pathc.
Previous patch revisions : r313343 , r314886
Reviewers: lsaba, RKSimon, craig.topper, qcolombet, jmolloy, jbhateja
Reviewed By: lsaba, RKSimon, jbhateja
Subscribers: jmolloy, spatel, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35014
llvm-svn: 319543
Summary: LegalizerInfo assumes all G_MERGE_VALUES and G_UNMERGE_VALUES instructions are legal, so it is not possible to legalize vector operations on illegal vector types. This patch fixes the problem by removing the related check and adding default actions for G_MERGE_VALUES and G_UNMERGE_VALUES.
Reviewers: qcolombet, ab, dsanders, aditya_nandakumar, t.p.northover, kristof.beyls
Reviewed By: dsanders
Subscribers: rovka, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39823
llvm-svn: 319524
The default legalization for v2i32 is promotion to v2i64. This results in a gather that reads 64-bit elements rather than 32. If one of the elements is near a page boundary this can cause an illegal access that can fault.
We also miscalculate the scale for the gather which is an even worse problem, but we probably could have found a separate way to fix that.
llvm-svn: 319521
These command line options are not intended for public use, and often
don't even make sense in the context of a particular tool anyway. About
90% of them are already hidden, but when people add new options they
forget to hide them, so if you were to make a brand new tool today, link
against one of LLVM's libraries, and run tool -help you would get a
bunch of junk that doesn't make sense for the tool you're writing.
This patch hides these options. The real solution is to not have
libraries defining command line options, but that's a much larger effort
and not something I'm prepared to take on.
Differential Revision: https://reviews.llvm.org/D40674
llvm-svn: 319505
G_ATOMICRMW_* is generally legal on AArch64. The exception is G_ATOMICRMW_NAND.
G_ATOMIC_CMPXCHG_WITH_SUCCESS needs to be lowered to G_ATOMIC_CMPXCHG with an
external comparison.
Note that IRTranslator doesn't generate these instructions yet.
llvm-svn: 319466
output
As part of the unification of the debug format and the MIR format,
always use `printReg` to print all kinds of registers.
Updated the tests using '_' instead of '%noreg' until we decide which
one we want to be the default one.
Differential Revision: https://reviews.llvm.org/D40421
llvm-svn: 319445
This re-commits everything that was pulled in r314244. The transformation
is off by default (patch to enable it to follow). The code is refactored
to have a single entry-point and provide fine-grained control over patterns
that it selects. This patch also fixes the bugs in the original code.
Everything that failed with the original patch has been re-tested with this
patch (with the transformation turned on). So the patch to turn this on is
soon to follow.
Differential Revision: https://reviews.llvm.org/D38575
llvm-svn: 319434
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
llvm-svn: 319427
Csmith generated a program where a store after load to the same address did
not get chained after the new load created during DAG legalizing, and so
performed an illegal overwrite of the expected value.
When the new zero-extending load is created, the chain users of the original
load must be updated, which was not done previously.
A similar case was also found and handled in lowerBITCAST.
Review: Ulrich Weigand
https://reviews.llvm.org/D40542
llvm-svn: 319409
Normal type legalization will widen everything. This requires forcing 0s into the mask register. We can instead choose the form that only reads 2 elements without zeroing the mask.
llvm-svn: 319406
GFX9 does not enable bounds checking for the resource descriptors
used for private access, so it should be OK to use vaddr with
a potentially negative value.
llvm-svn: 319393
- add -ppc-reg-with-percent-prefix option to use %r3 etc as register
names
- split off logic for Darwinish verbose conditional codes into a helper
function
- be explicit about Darwin vs AIX vs GNUish assembler flavors
Based on the patch from Alexandre Yukio Yamashita
Differential Revision: https://reviews.llvm.org/D39016
llvm-svn: 319381
Partially reverting enabling of post-legalization store merge
(r319036) for just ARM backend as it is causing incorrect code
in some Thumb2 cases.
llvm-svn: 319331
When lowering a G_BRCOND, we generate a TSTri of the condition against
1, which sets the flags, and then a Bcc which branches based on the
value of the flags.
Unfortunately, we were using the wrong condition code to check whether
we need to branch (EQ instead of NE), which caused all our branches to
do the opposite of what they were intended to do. This patch fixes the
issue by using the correct condition code.
llvm-svn: 319313
When translating pseudo to MC, v_add/sub/subrev_u32 shall be mapped via a separate table as GFX8 has opcodes with the same names.
These instructions shall also be labelled as renamed for pseudoToMCOpcode to handle them correctly.
Reviewers: arsenm
Differential Revision: https://reviews.llvm.org/D40550
llvm-svn: 319311
This will allow compilation of assembly files targeting armv7e-m without having
to specify the Tag_CPU_arch attribute as a workaround.
Differential revision: https://reviews.llvm.org/D40370
Patch by Ian Tessier!
llvm-svn: 319303
Separate the handling of AND/AND8 out from PHI/OR/ISEL checking. The reasoning
is the others need all their operands to be sign/zero extended for their output
to also be sign/zero extended. This is true for AND and sign-extension, but for
zero-extension we only need at least one of the input operands to be zero
extended for the result to also be zero extended.
Differential Revision: https://reviews.llvm.org/D39078
llvm-svn: 319289
The object can't straddle the address space
wrap around, so I think it's OK to assume any
offsets added to the base object pointer can't
overflow. Similar logic already appears to be
applied in SelectionDAGBuilder when lowering
aggregate returns.
llvm-svn: 319272
GFX9 stopped using m0 for most DS instructions. Select
a different instruction without the use. I think this will
be less error prone than trying to manually maintain m0
uses as needed.
llvm-svn: 319270
Previously we had an isel pattern to add the truncate. Instead use Promote to add the truncate to the DAG before isel.
The Promote legalization code had to be updated to prevent an infinite loop if promotion took multiple steps because it wasn't remembering the previously tried value.
llvm-svn: 319259
The IRTranslator cannot generate these instructions at the moment so there's no
issue with not having implemented ISel for them yet. D40092 will add
G_ATOMIC_CMPXCHG_WITH_SUCCESS and G_ATOMICRMW_* to the IRTranslator and a
further patch will add support for lowering G_ATOMIC_CMPXCHG_WITH_SUCCESS into
G_ATOMIC_CMPXCHG with an external success check via the `Lower` action.
The separation of G_ATOMIC_CMPXCHG_WITH_SUCCESS and G_ATOMIC_CMPXCHG is
to import SelectionDAG rules while still supporting targets that prefer to
custom lower the original LLVM-IR-like operation.
llvm-svn: 319216
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
Generalize FixFunctionBitcasts to handle varargs functions. This in
particular fixes the case where clang bitcasts away a varargs when
calling a K&R-style function.
This avoids interacting with tricky ABI details because it operates
at the LLVM IR level before varargs ABI details are exposed.
This fixes PR35385.
llvm-svn: 319186
Looking through Agner, FTST is very similar to generic float compare behaviour, so I've added them to the existing IIC_FCOMI (WriteFAdd) tags.
llvm-svn: 319184
Atom's FABS/FCHS/FSQRT latencies taken from Agner.
Note: I just added FSIN and FCOS to the existing IIC_FSINCOS itinerary, which is actually a more costly instruction.
llvm-svn: 319175
This is needed for cases when the memory access is not as big as the width of
the data type. For instance, storing i1 (1 bit) would be done in a byte (8
bits).
Using 'BitSize >> 3' (or '/ 8') would e.g. give the memory access of an i1 a
size of 0, which for instance makes alias analysis return NoAlias even when
it shouldn't.
There are no tests as this was done as a follow-up to the bugfix for the case
where this was discovered (r318824). This handles more similar cases.
Review: Björn Petterson
https://reviews.llvm.org/D40339
llvm-svn: 319173
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
llvm-svn: 319168
Summary:
The entire algorithm operates per basic-block, so for cache locality
it should be better to re-optimize a basic-block immediately rather than
in a separate loop.
I don't have performance measurements.
Change-Id: I85106570bd623c4ff277faaa50ee43258e1ddcc5
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D40344
llvm-svn: 319156
Summary:
The PeepholeOptimizer pass calls this function solely based on checking
DefMI->isMoveImmediate(), which only checks the MoveImm bit of the
instruction description. So it's up to FoldImmediate itself to properly
check that DefMI *actually* moves from an immediate.
I don't have a separate test case for this, but the next patch introduces
a test case which happens to crash without this change.
This error is caught by the assertion in MachineOperand::getImm().
Change-Id: I88e7cdbcf54d75e1a296822e6fe5f9a5f095bbf8
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D40342
llvm-svn: 319155
This adds code to protect WebAssembly's `trunc_s` family of opcodes
from values outside their domain. Even though such conversions have
full undefined behavior in C/C++, LLVM IR's `fptosi` and `fptoui` do
not, and only return undef.
This also implements the proposed non-trapping float-to-int conversion
feature and uses that instead when available.
llvm-svn: 319128
These lines all exist identically either under SSE2, AVX2 or AVX512. Given that VLX implies all of those, these aren't providing anything new.
llvm-svn: 319124
Which VTs are considered simple is determined by the superset of the legal types of all targets in LLVM. If we're looking at VTs that are going to be split down to 512-bits we should allow any VT not just simple ones since the simple list changes over time as new targets are added.
llvm-svn: 319110
We don't do this for narrow vectors under AVX or SSE features. We also don't set them to Expand like we do for many vectors op. Nor does TargetLoweringBase.cpp. This leads me to believe these default to Legal.
llvm-svn: 319103
This patch adds a peep hole optimization to remove any redundant toc save
instructions added as part of the call sequence for indirect calls. It removes
any toc saves within a function that are dominated by another toc save.
Differential Revision: https://reviews.llvm.org/D39736
llvm-svn: 319087
I don't have a good test case for this at the moment. I was playing around with a change in legalizing and triggered this code to produce a PSHUFD with sse1 only.
llvm-svn: 319066
Similar for vXi16/vXi8 with BWI.
Any vector larger than 512 bits will be split to 512 bits during legalization. But without this we will fold sexts with them before that making it difficult to recover leading to scalarization.
llvm-svn: 319059
This patch extends on to rL307174 to not use the power9 vector extract with
variable index instructions when extracting word element 1. For such cases,
the existing selection of MFVSRWZ provides a better sequence.
Differential Revision: https://reviews.llvm.org/D38287
llvm-svn: 319049
Summary:
Now that store-merge is only generates type-safe stores, do a second
pass just before instruction selection to allow lowered intrinsics to
be merged as well.
Reviewers: jyknight, hfinkel, RKSimon, efriedma, rnk, jmolloy
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33675
llvm-svn: 319036
Make the print format consistent with other assembler instructions.
Adding a tab character instead of space in asmstring of Ext and Ins
instructions.
Removing space around the tab character for JALRC and replacing space with
tab in JRC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38144
llvm-svn: 319030
AMDGPU backend errors with "unsupported call to function" upon
encountering a call to llvm.log{,10}.{f16,f32} intrinsics. This patch
adds custom lowering to avoid that error on both R600 and SI.
Reviewers: arsenm, jvesely
Subscribers: tstellar
Differential Revision: https://reviews.llvm.org/D29942
llvm-svn: 319025
As mentioned on PR17367, many instructions are missing scheduling tags preventing us from setting 'CompleteModel = 1' for better instruction analysis. This patch deals with FMA/FMA4 which is one of the bigger offenders (along with AVX512 in general).
Annoyingly all scheduler models need to define WriteFMA (now that its actually used), even for older targets without FMA/FMA4 support, but that is an existing problem shared by other schedule classes.
Differential Revision: https://reviews.llvm.org/D40351
llvm-svn: 319016
The commit https://reviews.llvm.org/rL318143 computes incorrectly to offset to
restore LR from.
The number of tPOP operands is 2 (condition) + 2 (implicit def and use of SP) +
count of the popped registers. We need to load LR from just past the last
register, hence the correct offset should be either getNumOperands() - 4 and
getNumExplicitOperands() - 2 (multiplied by 4).
Differential revision: https://reviews.llvm.org/D40305
llvm-svn: 319014
Shadow stack solution introduces a new stack for return addresses only.
The HW has a Shadow Stack Pointer (SSP) that points to the next return address.
If we return to a different address, an exception is triggered.
The shadow stack is managed using a series of intrinsics that are introduced in this patch as well as the new register (SSP).
The intrinsics are mapped to new instruction set that implements CET mechanism.
The patch also includes initial infrastructure support for IBT.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40223
Change-Id: I4daa1f27e88176be79a4ac3b4cd26a459e88fed4
llvm-svn: 318996
Summary:
These instructions zero the non-scalar part of the lower 128-bits which makes them different than the FMA3 instructions which pass through the non-scalar part of the lower 128-bits.
I've only added fmadd because we should be able to derive all other variants using operand negation in the intrinsic header like we do for AVX512.
I think there are still some missed negate folding opportunities with the FMA4 instructions in light of this behavior difference that I hadn't noticed before.
I've split the tests so that we can use different intrinsics for scalar testing between the two. I just copied the tests split the RUN lines and changed out the scalar intrinsics.
fma4-fneg-combine.ll is a new test to make sure we negate the fma4 intrinsics correctly though there are a couple TODOs in it.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39851
llvm-svn: 318984
Summary:
This adds a new fast gather feature bit to cover all CPUs that support fast gather that we can use independent of whether the AVX512 feature is enabled. I'm only using this new bit to qualify AVX2 codegen. AVX512 is still implicitly assuming fast gather to keep tests working and to match the scatter behavior.
Test command lines have been added for these two cases.
Reviewers: magabari, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40282
llvm-svn: 318983
v4i32 isn't a legal type with sse1 only and would end up getting scalarized otherwise.
This isn't completely ideal as it doesn't handle cases like v8i32 that would get split to v4i32. But it at least helps with code written using the clang intrinsic header.
llvm-svn: 318967
This optimization can occur after type legalization and emit a vselect with v4i32 type. But that type is not legal with sse1. This ultimately gets scalarized by the second type legalization that runs after vector op legalization, but that's really intended to handle the scalar types that might be introduced by legalizing vector ops.
For now just stop this from happening by disabling the optimization with sse1.
llvm-svn: 318965
This patch fixes an issue where microMIPS ASE flag is not set
when a function has micromips attribute or when .set micromips
directive is used.
Differential Revision: https://reviews.llvm.org/D40316
llvm-svn: 318948
The NewCC variable is calculated outside of the loop that processes jcc/setcc/cmovcc instructions. If we invert it during the loop it can cause an incorrect value to be used by a later iteration. Instead only read it during the loop and use a new variable to store the possibly inverted value.
Fixes PR35399.
llvm-svn: 318934
(V)PHMINPOSUW determines the UMIN element in an v8i16 input, with suitable bit flipping it can also be used for SMAX/SMIN/UMAX cases as well.
This patch matches vXi16 SMAX/SMIN/UMAX/UMIN horizontal reductions and reduces the input down to a v8i16 vector before calling (V)PHMINPOSUW.
A later patch will use this for v16i8 reductions as well (PR32841).
Differential Revision: https://reviews.llvm.org/D39729
llvm-svn: 318917
TableGen already generates code for selecting a G_FDIV, so we only need
to add a test.
For the legalizer and reg bank select, we do the same thing as for the
other floating point binary operations: either mark as legal if we have
a FP unit or lower to a libcall, and map to the floating point
registers.
llvm-svn: 318915
TableGen already generates code for selecting a G_FMUL, so we only need
to add a test for that part.
For the legalizer and reg bank select, we do the same thing as the other
floating point binary operators: either mark as legal if we have a FP
unit or lower to a libcall, and map to the floating point registers.
llvm-svn: 318910
The MIPS delay slot filler converts delay slot branches into compact
forms for the MIPS ISAs which support them. For branches that compare
(in)equality with with zero, it converts them into branches with implict
zero register operands. These branches have a slightly greater range
than normal two register operands branches.
Changing the branches at this point in the pipeline offers the long
branch pass the ability to mark better judgements if a long branch
sequence is required.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D40314
llvm-svn: 318908
This patch reverts change to X86TargetLowering::getScalarShiftAmountTy in
rL318727 and move the logic to DAGTypeLegalizer::SplitInteger.
The reason is that getScalarShiftAmountTy returns a shift amount type that
is suitable for common use cases in CodeGen. DAGTypeLegalizer::SplitInteger
is a rare situation which requires a shift amount type larger than what
getScalarShiftAmountTy. In this case, it is more reasonable to do special
handling of shift amount type in DAGTypeLegalizer::SplitInteger only. If
similar situations arises the logic may be moved to a separate function.
Differential Revision: https://reviews.llvm.org/D40320
llvm-svn: 318890
Change LowerBUILD_VECTOR to use those functions. This commit will tempora-
rily affect constant vector generation (it will generate constant-extended
values instead of non-extended combines), but the code for the general case
should be better. The constant selection part will be fixed later.
llvm-svn: 318877
SITargetLowering::LowerCall uses dummy pointer info for byval argument, which causes
flat load instead of buffer load.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40040
llvm-svn: 318844
Summary:
This bug seems to have gone unnoticed because critical cases with LDS
instructions are eliminated by the peephole optimizer.
However, equivalent situations arise with buffer loads and stores
as well, so this fixes regressions since r317751 ("AMDGPU: Merge
S_BUFFER_LOAD_DWORD_IMM into x2, x4").
Fixes at least:
KHR-GL45.shader_storage_buffer_object.basic-operations-case1-cs
KHR-GL45.cull_distance.functional
piglit tes-input-gl_ClipDistance.shader_test
... and probably more
Change-Id: I0e371536288eb8e6afeaa241a185266fd45d129d
Reviewers: arsenm, mareko, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D40303
llvm-svn: 318829
This makes the fact that X86 needs an explicit mask output not part of the type constraint for the ISD::MSCATTER.
This also gives the X86ISD::MGATHER/MSCATTER nodes a common base class simplifying the address selection code in X86ISelDAGToDAG.cpp
llvm-svn: 318823
Now we consistently represent the mask result without relying on isel ignoring it.
We now have a more general SDNode and type constraints to represent these nodes in isel patterns. This allows us to present both both vXi1 and XMM/YMM mask types with a single set of constraints.
llvm-svn: 318821
This is based on table 1-1 of the October 2017 revision of Intel® Architecture Instruction Set Extensions and Future Features Programming Reference
llvm-svn: 318799
This partially reverts r298851. The the underlying issue is that we don't
currently model the dependency between mrs (read system register) and
msr (write system register) instructions.
Something like the below should never be reordered:
msr TPIDR_EL0, x0 ;; set thread pointer
mrs x8, TPIDR_EL0 ;; read thread pointer
but was being reordered after r298851. The functional part of the patch
that wasn't reverted needed to remain in place in order to not break
r299462.
PR35317
llvm-svn: 318788
These are pre-UAL syntax, and we don't support any other pre-UAL instructions,
with the exception of FLDMX/FSTMX, which don't have a UAL equivalent. Therefore
there's no reason to keep them or their AsmParser hacks around.
With the AsmParser hacks removed, the FLDMX and FSTMX instructions get the same
operand diagnostics as the UAL instructions.
Differential revision: https://reviews.llvm.org/D39196
llvm-svn: 318777
This was causing the (invalid) predicated versions of the NEON VRINTX and
VRINTZ instructions to be accepted, with the condition code being ignored.
Also, there is no NEON VRINTR instruction, so that part of the check was not
necessary.
Differential revision: https://reviews.llvm.org/D39193
llvm-svn: 318771
- We can still emit this error if the actual instruction has two or more
operands missing compared to the expected one.
- We should only emit this error once per instruction.
Differential revision: https://reviews.llvm.org/D36746
llvm-svn: 318770
As pointed out in post-commit review of r318738, `return ReplaceNode(..)` when
both ReplaceNode and the current function return void is confusing. This patch
moves to using a more obvious early return, and moves to just using an if to
catch the one case we currently care about. A future patch that adds further
custom instruction selection can introduce a switch.
llvm-svn: 318757
The obvious approach of defining a pattern like the one below actually doesn't
work:
`def : Pat<(i32 0), (i32 X0)>;`
As was noted when Lanai made this change (https://reviews.llvm.org/rL288215),
attempting to handle the constant 0 in tablegen leads to assertions due to a
physical register being used where a virtual register is expected.
llvm-svn: 318738
Previous patches primarily ensured that codegen was possible for the standard
RISC-V instructions. However, there are a number of IR inputs that wouldn't be
appropriately lowered. This patch both adds test cases and supports lowering
for a number of these cases:
* Improved sext/zext/trunc support
* Support for setcc variants that don't map directly to RISC-V instructions
* Lowering mul, and hence support for external symbols
* addc, adde, subc, sube
* mulhs, srem, mulhu, urem, udiv, sdiv
* {srl,sra,shl}_parts
* brind
* br_jt
* bswap, ctlz, cttz, ctpop
* rotl, rotr
* BlockAddress operands
Differential Revision: https://reviews.llvm.org/D29938
llvm-svn: 318737
Although ISD::SELECT_CC is a more natural match for RISCVISD::SELECT_CC (and
ultimately the integer RISC-V conditional branch instructions), we choose to
expand ISD::SELECT_CC and lower ISD::SELECT. The appropriate compare+branch
will be created in the case where an ISD::SELECT condition value is created by
an ISD::SETCC node, which operates on XLen types. Other datatypes such as
floating point don't have conditional branch instructions, and lowering
ISD::SELECT allows more flexibility for handling these cases.
Differential Revision: https://reviews.llvm.org/D29937
llvm-svn: 318735
We don't need separate 32 and 64 node types. We can use SDTCisInt and SDTCisSameSizeAs to ensure the mask size the result type and is integer.
llvm-svn: 318732
DAGTypeLegalizer::SplitInteger uses default pointer size as shift amount constant type,
which causes less performant ISA in amdgcn---amdgiz target since the default pointer
type is i64 whereas the desired shift amount type is i32.
This patch fixes that by using TLI.getScalarShiftAmountTy in DAGTypeLegalizer::SplitInteger.
The X86 change is necessary since splitting i512 requires shifting amount of 256, which
cannot be held by i8.
Differential Revision: https://reviews.llvm.org/D40148
llvm-svn: 318727
Initialize IsVis2 and IsVis3 in SparcSubtarget::initializeSubtargetDependencies.
MSan detected uninitialized read of IsVis3 after r318704. Initializing the
variables to false will prevent undefined behavior.
llvm-svn: 318724
Summary:
while investigating performance degradation of imagick benchmark
there were found inefficient pattern for UINT_TO_FP conversion.
That pattern causes RAW hazard in assembly code. Specifically,
uitofp IR operator results in poor assembler :
st %i0, [%fp - 952]
ldd [%fp - 952], %f0
it stores 32-bit integer register into memory location and then
loads 64-bit floating point data from that location.
That is exactly RAW hazard case. To optimize that case it is
possible to use SPISD::ITOF and SPISD::XTOF for conversion from
integer to floating point data type and to use ISD::BITCAST to
copy from integer register into floating point register.
The fix is to write custom UINT_TO_FP pattern using SPISD::ITOF,
SPISD::XTOF, ISD::BITCAST.
Patch by Alexey Lapshin
Reviewers: fedor.sergeev, jyknight, dcederman, lero_chris
Reviewed By: jyknight
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36875
llvm-svn: 318704
Move the hazard scheduling pass to after the long branch pass, as the
long branch pass can create forbiddden slot hazards. Rather than complicating
the implementation of the long branch pass to handle forbidden slot hazards,
just reorder the passes.
llvm-svn: 318657
The VSX versions have the advantage of a full 64-register target whereas the FP
ones have the advantage of lower latency and higher throughput. So what we’re
after is using the faster instructions in low register pressure situations and
using the larger register file in high register pressure situations.
The heuristic chooses between the following 7 pairs of instructions.
PPC::LXSSPX vs PPC::LFSX
PPC::LXSDX vs PPC::LFDX
PPC::STXSSPX vs PPC::STFSX
PPC::STXSDX vs PPC::STFDX
PPC::LXSIWAX vs PPC::LFIWAX
PPC::LXSIWZX vs PPC::LFIWZX
PPC::STXSIWX vs PPC::STFIWX
Differential Revision: https://reviews.llvm.org/D38486
llvm-svn: 318651
Summary:
This patch fixes an issue so that the right alias is printed when the instruction has tied operands. It checks the number of operands in the resulting instruction as opposed to the alias, and then skips over tied operands that should not be printed in the alias.
This allows to generate the preferred assembly syntax for the AArch64 'ins' instruction, which should always be displayed as 'mov' according to the ARM Architecture Reference Manual. Several unit tests have changed as a result, but only to reflect the preferred disassembly. Some other InstAlias patterns (movk/bic/orr) needed a slight adjustment to stop them becoming the default and breaking other unit tests.
Please note that the patch is mostly the same as https://reviews.llvm.org/D29219 which was reverted because of an issue found when running TableGen with the Address Sanitizer. That issue has been addressed in this iteration of the patch.
Reviewers: rengolin, stoklund, huntergr, SjoerdMeijer, rovka
Reviewed By: rengolin, SjoerdMeijer
Subscribers: fhahn, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D40030
llvm-svn: 318650
kernel verifier is becoming smarter and soon will support
direct and indirect function calls.
Remove obsolete error from BPF backend.
Make call to use PCRel_4 fixup.
'bpf to bpf' calls are distinguished from 'bpf to kernel' calls
by insn->src_reg == BPF_PSEUDO_CALL == 1 which is used as relocation
indicator similar to ld_imm64->src_reg == BPF_PSEUDO_MAP_FD == 1
The actual 'call' instruction remains the same for both
'bpf to kernel' and 'bpf to bpf' calls.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 318614
We don't need a dyn_cast, the predicate already specified the base node. We only need to check the type of the index, the base ptr is guaranteed to be scalar.
llvm-svn: 318596
This makes sure that functions that only clobber xmm registers
(on win64) also get the right cfi directives, if dwarf exceptions
are enabled.
Differential Revision: https://reviews.llvm.org/D40191
llvm-svn: 318591
We used to detect loads feeding fp instructions, but we were
failing to take into account cases where this happens through copies.
For instance, loads can fed copies coming from the ABI lowering
of floating point arguments/results.
llvm-svn: 318589
We used to detect that stores were fed by fp instructions, but we were
failing to take into account cases where this happens through copies.
For instance, stores can be fed by copies coming from the ABI lowering
of floating point arguments.
llvm-svn: 318588
This is mostly moving VMEM clause breaking into
the hazard recognizer. Also move another hazard
currently handled in the waitcnt pass.
Also stops breaking clauses unless xnack is enabled.
llvm-svn: 318557
Enabling and using dwarf exceptions seems like an easier path
to take, than to make the COFF/ARM backend output EHABI directives.
Previously, no EH model was enabled at all on this target.
There's no point in setting UseIntegratedAssembler to false since
GNU binutils doesn't support Windows on ARM, and since we don't
need to support external assembler, we don't need to use register
numbers in cfi directives.
Differential Revision: https://reviews.llvm.org/D39532
llvm-svn: 318510
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
't' constraint normally only accepts f32 operands, but for VCVT the
operands can be i32. LLVM is overly restrictive and rejects asm like:
float foo() {
float result;
__asm__ __volatile__(
"vcvt.f32.s32 %[result], %[arg1]\n"
: [result]"=t"(result)
: [arg1]"t"(0x01020304) );
return result;
}
Relax the value type for 't' constraint to either f32 or i32.
Differential Revision: https://reviews.llvm.org/D40137
llvm-svn: 318472
Only do this pre-legalize in case we're using the sign extend to legalize for KNL.
This recovers all of the tests that changed when I stopped SelectionDAGBuilder from deleting sign extends.
There's more work that could be done here particularly to fix the i8->i64 test case that experienced split.
llvm-svn: 318468
The wider element type will normally cause legalize to try to split and scalarize the gather/scatter, but we can't handle that. Instead, truncate the index early so the gather/scatter node is insulated from the legalization.
This really shouldn't happen in practice since InstCombine will normalize index types to the same size as pointers.
llvm-svn: 318452
This patch changes all i32 constant in store instruction to i64 with truncation, to increase the chance that the referenced constant can be shared with other i64 constant.
Differential Revision: https://reviews.llvm.org/D39352
llvm-svn: 318436
This patch contains more accurate cost of interelaved load\store of stride 2 for the types int64\double on AVX2.
Reviewers: delena, RKSimon, craig.topper, dorit
Reviewed By: dorit
Differential Revision: https://reviews.llvm.org/D40008
llvm-svn: 318385
The type legalizer will try to scalarize these operations if it sees them, but there is no handling for scalarizing them. This leads to a fatal error. With this change they will now be scalarized by the mem intrinsic scalarizing pass before SelectionDAG.
llvm-svn: 318380
Add hook in BPF backend so that llvm-objdump can print out
the jmp target with label names, e.g.,
...
if r1 != 2 goto 6 <LBB0_2>
...
goto 7 <LBB0_4>
...
LBB0_2:
...
LBB0_4:
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 318358
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
llvm-svn: 318352
Use VOP3 add/addc like usual.
This has some tradeoffs. Inline immediates fold
a little better, but other constants are worse off.
SIShrinkInstructions could be made smarter to handle
these cases.
This allows us to avoid selecting scalar adds where we
need to track the carry in scc and replace its users.
This makes it easier to use the carryless VALU adds.
llvm-svn: 318340
Move remaining inline matching of instructions of some optimizations into
separate functions, like in the other optimizations. Otherwise, NFC.
Differential revision: https://reviews.llvm.org/D40090
llvm-svn: 318335
Implements TargetLowering callback 'mayBeEmittedAsTailCall' that enables
CodeGenPrepare to duplicate returns when they might enable a tail-call.
Differential Revision: https://reviews.llvm.org/D39777
llvm-svn: 318321
Some CPUs are already overriding these sign extension instructions but we should be able to use the WriteALU schedule class by default.
Differential Revision: https://reviews.llvm.org/D39899
llvm-svn: 318308
Move the calling convention checks for tail-call eligibility for the 64-bit
SysV ABI into a separate function. This is so that it can be shared with
'mayBeEmittedAsTailCall' in a subsequent change.
llvm-svn: 318305
Summary:
Prevent an issue where a diagnostic is reported multiple times by bailing out with a ParseFail if an invalid SVE register element qualifier/suffix is specified, for example:
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
^
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
...
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
^
Reviewers: fhahn, rengolin
Reviewed By: rengolin
Subscribers: aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D39894
llvm-svn: 318297
APInt is now used instead of uint64_t in function genConstMult() allowing
multiplication optimizations with constants of arbitrary length.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38130
llvm-svn: 318296
This is a refactoring/cleanup of Arm `addrmode2` operand class. The patch
removes it completely.
Differential Revision: https://reviews.llvm.org/D39832
llvm-svn: 318291
This allows us to remove extra extend creation during lowering and more accurately reflects the semantics of the instruction.
While there add an extra output VT to X86 masked gather node to better match the isel pattern predicate. Currently we're exploiting the fact that the isel table doesn't count how many output results a node actually has if the result type of any can be inferred from the first result and the type constraints defined in tablegen. I think we might ultimately want to lower all MGATHER/MSCATTER to an X86ISD node with the extra mask result and stop relying on this hole in the isel checking.
llvm-svn: 318278
This adjusts the tests to hopfully pacify the
llvm-clang-x86_64-expensive-checks-win buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 318207
In rare cases, common code will attempt to select an OR of two
constants. This confuses the logic in splitLargeImmediate,
causing an internal error during isel. Fixed by simply leaving
this case to common code to handle.
This fixes PR34859.
llvm-svn: 318187
Before using the 32-bit RISBMux set of instructions we need to
verify that the input bits are actually within range of the 32-bit
instruction. This fixer PR35289.
llvm-svn: 318177
Because the block-splitting code is multi-purpose, we have to meddle with the
branches when using it to fixup a conditional branch destination. We got the
code right, but forgot to update the CFG so the verifier complained when
expensive checks were on.
Probably harmless since constant-islands comes so late, but best to fix it
anyway.
llvm-svn: 318148
Get rid of the handwritten instruction selector code for handling
G_CONSTANT. This code wasn't checking all the preconditions correctly
anyway, so it's better to leave it to TableGen, which can handle at
least some cases correctly (e.g. MOVi, MOVi16, folding into binary
operations). Also add tests to cover those cases.
llvm-svn: 318146
When we emit a tail call for Armv8-M, but then discover that the caller needs to
save/restore `LR`, we convert the tail call to an ordinary one, since restoring
`LR` takes extra instructions, which may negate the benefits of the tail
call. If the callee, however, takes stack arguments, this conversion is
incorrect, since nothing has been done to pass the stack arguments.
Thus the patch reverts https://reviews.llvm.org/rL294000
Also, we improve the instruction sequence for popping `LR` in the case when we
couldn't immediately find a scratch low register, but we can use as a temporary
one of the callee-saved low registers and restore `LR` before popping other
callee-saves.
Differential Revision: https://reviews.llvm.org/D39599
llvm-svn: 318143
If the register from the copy from exec was spilled,
the copy before the spill was deleted leaving a spill
of undefined register verifier error and miscompiling.
Check for other use instructions of the copy register.
llvm-svn: 318132
Summary:
This fixes PR35221.
Use pseudo-instructions to let MachineCSE hoist global address computation.
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39871
llvm-svn: 318081
If the base of our gather corresponds to something contained in X86ISD::Wrapper we should be able to fold it into the address.
This patch refactors some of the address matching to more fully use the X86ISelAddressMode struct and the getAddressOperands helper. A new helper function matchVectorAddress is added to call matchWrapper or fall back to matchAddressBase.
We should also be able to support constant offsets from a wrapper, but I'll look into that in a future patch. We may even be able to completely reuse matchAddress here, but I wanted to start simple and work up to it.
Differential Revision: https://reviews.llvm.org/D39927
llvm-svn: 318057
Remove builtins from llvm and add AutoUpgrade support.
Also add fast-isel tests for the TEST and TESTN instructions.
Differential Revision: https://reviews.llvm.org/D38736
llvm-svn: 318036
When generating table jump code for switch statements, place the jump
table label as the first operand in the various addition instructions
in order to enable addressing mode selectors to better match index
computation and possibly fold them into the addressing mode of the
table entry load instruction.
Differential revision: https://reviews.llvm.org/D39752
llvm-svn: 318033
This patch, together with a matching clang patch (https://reviews.llvm.org/D38672), implements the lowering of X86 shuffle i/f intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D38671
Change-Id: I1e7d359a74743e995ec356237a85214ce55d3661
llvm-svn: 318026
Updated the scheduling information of the SKX subtarget in the file X86SchedSkylakeServer.td under lib/Target/X86 to:
1. add regular opcodes in addition to the suffixed "_Int" opcodes
2. add the (V)MAXCPD/MAXCPS/MAXCSD/MAXCSS/MINCPD/MINCPS/MINCSD/MINCSS
instructions that are equivalent to their counterparts without the 'C' as they are part of a hack to
make floating point min/max commutable under fast math.
Reviewers: zvi, RKSimon, craig.topper
Differential Revision: https://reviews.llvm.org/D39833
Change-Id: Ie13702a5ce1b1a08af91ca637a52b6962881e7d6
llvm-svn: 318024
This was using a custom function that didn't handle the
addressing modes properly for private. Use
isLegalAddressingMode to avoid duplicating this.
Additionally, skip the combine if there is only one use
since the standard combine will handle it.
llvm-svn: 318013
The VRNDSCALE instructions implement a superset of the (V)ROUND instructions. They are equivalent if the upper 4-bits of the immediate are 0.
This patch lowers the legacy intrinsics to the VRNDSCALE ISD node and masks the upper bits of the immediate to 0. This allows us to take advantage of the larger register encoding space.
We should maybe consider converting VRNDSCALE back to VROUND in the EVEX to VEX pass if the extended registers are not being used.
I notice some load folding opportunities being missed for the VRNDSCALESS/SD instructions that I'll try to fix in future patches.
llvm-svn: 318008
I want to reuse the VRNDSCALE node for the legacy SSE rounding intrinsics so that those intrinsics can use EVEX instructions. All of these nodes share tablegen multiclasses so I split them all so that they all remain similar in their implementations.
llvm-svn: 318007
matchBinOpReduction currently matches against a single opcode, but we already have a case where we repeat calls to try to match against AND/OR and I'll be shortly adding another case for SMAX/SMIN/UMAX/UMIN (D39729).
This NFCI patch alters matchBinOpReduction to try and pattern match against any of the provided list of candidate bin ops at once to save time.
Differential Revision: https://reviews.llvm.org/D39726
llvm-svn: 317985
This is consistent with out normal implementation of scalar instructions.
While there disable load folding for the patterns with IMPLICIT_DEF unless optimizing for size which is also our standard practice.
llvm-svn: 317977
* The method getRegAllocationHints() is now of bool type instead of void. If
true is returned, regalloc (AllocationOrder) will *only* try to allocate the
hints, as opposed to merely trying them before non-hinted registers.
* TargetRegisterInfo::getRegAllocationHints() is implemented for SystemZ with
an increase in number of LOCRs.
In this case, it is desired to force the hints even though there is a slight
increase in spilling, because if a non-hinted register would be allocated,
the LOCRMux pseudo would have to be expanded with a jump sequence. The LOCR
(Load On Condition) SystemZ instruction must have both operands in either the
low or high part of the 64 bit register.
Reviewers: Quentin Colombet and Ulrich Weigand
https://reviews.llvm.org/D36795
llvm-svn: 317879
r600 uses dummy pointer info for lowering load/store. Since dummy pointer info
assumes address space 0, this causes isel failure when temporary load/store SDNodes
are generated for amdgiz environment.
Since the offest is not constant, FixedStack pseudo source value cannot be used
to create the pointer info. This patch creates pointer info using llvm undef value.
At least this provides correct address space so that isel can be done correctly.
Differential Revision: https://reviews.llvm.org/D39698
llvm-svn: 317862
The pointer info for pseudo source for r600 is not correct when
alloca addr space is not 0, which causes invalid SDNode for r600---amdgiz.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D39670
llvm-svn: 317861
We don't really need any special handling of "offsettable"
memory addresses, but since some existing code uses inline
asm statements with the "o" constraint, add support for this
constraint for compatibility purposes.
llvm-svn: 317807
Correct the definition of 'j' as being unavailable for microMIPS32R6 and
provide the 'b' assembly idiom for codegen purposes for microMIPS32r3.
Provide the necessary 'br' pattern for microMIPS32R6 as it now longer
incorrectly uses the 'j' instruction.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39741
llvm-svn: 317801
No existing processor has both so it doesn't really matter what we do here. But we were previously just relying on pattern order which gave FMA4 priority.
llvm-svn: 317775
r317453 added new ISD nodes without rounding modes that were added to an existing if/else chain. But all the previous nodes handled there included a rounding mode. The final code after this if/else chain expected an extra operand that isn't present for the new nodes.
llvm-svn: 317748
This reverts r317579, originally committed as r317100.
There is a design issue with marking CFI instructions duplicatable. Not
all targets support the CFIInstrInserter pass, and targets like Darwin
can't cope with duplicated prologue setup CFI instructions. The compact
unwind info emission fails.
When the following code is compiled for arm64 on Mac at -O3, the CFI
instructions end up getting tail duplicated, which causes compact unwind
info emission to fail:
int a, c, d, e, f, g, h, i, j, k, l, m;
void n(int o, int *b) {
if (g)
f = 0;
for (; f < o; f++) {
m = a;
if (l > j * k > i)
j = i = k = d;
h = b[c] - e;
}
}
We get assembly that looks like this:
; BB#1: ; %if.then
Lloh3:
adrp x9, _f@GOTPAGE
Lloh4:
ldr x9, [x9, _f@GOTPAGEOFF]
mov w8, wzr
Lloh5:
str wzr, [x9]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.lt LBB0_3
b LBB0_7
LBB0_2: ; %entry.if.end_crit_edge
Lloh6:
adrp x8, _f@GOTPAGE
Lloh7:
ldr x8, [x8, _f@GOTPAGEOFF]
Lloh8:
ldr w8, [x8]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.ge LBB0_7
LBB0_3: ; %for.body.lr.ph
Note the multiple .cfi_def* directives. Compact unwind info emission
can't handle that.
llvm-svn: 317726
Previously, hasSideEffects was ? for TargetOpcode::PHI and would be inferred
as 1. D37065 sets the previously inferred properties explicitly. This patch sets
hasSideEffects=0 for PHI, as it is for G_PHI. MachineInstr::isSafeToMove has
been updated so it still returns false for PHI.
Additionally, HexagonBitSimplify relied on a PHI node having the
hasUnmodeledSideEffects property. This patch fixes that assumption.
Differential Revision: https://reviews.llvm.org/D37097
llvm-svn: 317721
We were calling tryFoldLoad with the 'and' node was the root and parent node of the load. But the parent of the load should be the shift that proceeds the and. While the and node is correctly the root node.
To fix this I had to make tryFoldLoad take a separate use and root input. I've added a convenience version with the old signature to avoid updating the other call sites.
llvm-svn: 317720
Without this we can't parse gather instructions in ms inline asm blocks. The validateInstruction function was introduced in r316700 to check gather constraints.
llvm-svn: 317713
Previously, an "r" constraint would mean the compiler provides a value
on WebAssembly's operand stack. This was tricky to use properly,
particularly since it isn't possible to declare a new local from within
an inline asm string.
With this patch, "r" provides the value in a WebAssembly local, and the
local index is provided to the inline asm string. This requires inline
asm to use get_local and set_local to read the register. This does
potentially result in larger code size, however inline asm should
hopefully be quite rare in WebAssembly.
This also means that the "m" constraint can no longer be supported, as
WebAssembly has nothing like a "memory operand" that includes an
implicit get_local.
This fixes PR34599 for the wasm32-unknown-unknown-wasm target (though
not for the ELF target).
llvm-svn: 317707
Note that this is just enough for simple function call examples to generate
working code. Support for varargs etc follows in future patches.
Differential Revision: https://reviews.llvm.org/D29936
llvm-svn: 317691
A good portion of this patch is the extra functions that needed to be
implemented to support the test case. e.g. storeRegToStackSlot,
loadRegFromStackSlot, eliminateFrameIndex.
Setting ISD::BR_CC to Expand may appear non-obvious on an architecture with
branch+cmp instructions. However, I found it much easier to deal with matching
the expanded form.
I had to change simm13_lsb0 and simm21_lsb0 to inherit from the
Operand<OtherVT> class rather than Operand<i32> in order to keep tablegen
happy. This isn't a big deal, but it does seem a shame to lose the uniformity
across immediate types when there's not an obvious benefit (I'm hoping a
tablegen expert will educate me on what I'm missing here!).
Differential Revision: https://reviews.llvm.org/D29935
llvm-svn: 317690
This required the implementation of RISCVTargetInstrInfo::copyPhysReg. Support
for lowering global addresses follow in the next patch.
Differential Revision: https://reviews.llvm.org/D29934
llvm-svn: 317685
Previously these pseudo instructions were not guarded by ISA, so their
select was dependant on the ordering of the entries in the DAG matcher.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39723
llvm-svn: 317681
rL162640 introduced CodeGenTarget::guessInstructionProperties. If a target
sets guessInstructionProperties=0 in its FooInstrInfo, tablegen will error if
it has to guess properties from patterns. Unfortunately,
guessInstructionProperties=0 can't be used with current upstream LLVM as
instructions in the TargetOpcode namespace are always included and sometimes
have inferred properties for mayLoad, mayStore, and hasSideEffects. This patch
provides the simplest possible fix to this problem, setting default values for
these fields in the TargetOpcode scope. There is no intended functional
change, as the explicitly set properties should match what was previously
inferred. A number of the instructions had hasSideEffects=1 inferred
unintentionally. This patch makes it explicit, while future patches (such as
D37097) correct the property.
Differential Revision: https://reviews.llvm.org/D37065
llvm-svn: 317674
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
Summary:
This just seems to have been an oversight. We already supported the f64
atomic add with an explicit scope (e.g. "cta"), but not the scopeless
version.
Reviewers: tra
Subscribers: jholewinski, sanjoy, cfe-commits, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39638
llvm-svn: 317623
An "or" that sets the sign-bit can be replaced with a "xor", if
the sign-bit was known to be clear before. With some changes to
instruction combining, the simple sign-bit check was failing.
Replace it with a more flexible one to catch more cases.
llvm-svn: 317592
Patch [5/5] in a series to add assembler/disassembler support for AArch64 SVE unpredicated ADD/SUB instructions.
Patch by Sander De Smalen.
Reviewed by: rengolin
Differential Revision: https://reviews.llvm.org/D39091
llvm-svn: 317591
Patch [3/5] in a series to add assembler/disassembler support for AArch64 SVE unpredicated ADD/SUB instructions.
To summarise, this patch adds:
* SVE register definitions
* Methods to parse SVE register operands
* Methods to print SVE register operands
* RegKind SVEDataVector to distinguish it from other data types like scalar register or Neon vector.
* k_SVEDataRegister and SVEDataRegOp to describe SVE registers (which will be extended by further patches with e.g. ElementWidth and the shift-extend type).
Patch by Sander De Smalen.
Reviewed by: rengolin
Differential Revision: https://reviews.llvm.org/D39089
llvm-svn: 317590
Patch [4/5] in a series to add assembler/disassembler support for AArch64 SVE unpredicated ADD/SUB instructions.
We add SVE as unsupported feature for CPUs that don't have SVE to prevent errors from scheduler models saying it lacks information for these instructions.
Patch by Sander De Smalen.
Reviewed by: rengolin
Differential Revision: https://reviews.llvm.org/D39090
llvm-svn: 317582
Reland r317100 with minor fix regarding ComputeCommonTailLength function in
BranchFolding.cpp. Skipping top CFI instructions block needs to executed on
several more return points in ComputeCommonTailLength().
Original r317100 message:
"Correct dwarf unwind information in function epilogue for X86"
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
llvm-svn: 317579
Summary:
The cost calculation for default case on X86 target does not always
follow correct wayt because of missing 4-th argument in
`BaseT::getCastInstrCost()` call. Added this missing parameter.
Reviewers: hfinkel, mkuper, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39687
llvm-svn: 317576
Patch [2/5] in a series to add assembler/disassembler support for AArch64 SVE unpredicated ADD/SUB instructions.
This change is a non functional change that adds RegKind as an alternative to 'isVector' to prepare it for newer types (SVE data vectors and predicate vectors) that will be added in next patches (where the SVE data vector is added as part of this patch set)
Patch by Sander De Smalen.
Reviewed by: rengolin
Differential Revision: https://reviews.llvm.org/D39088
llvm-svn: 317569
This changes the interface of how targets describe how to legalize, see
the below description.
1. Interface for targets to describe how to legalize.
In GlobalISel, the API in the LegalizerInfo class is the main interface
for targets to specify which types are legal for which operations, and
what to do to turn illegal type/operation combinations into legal ones.
For each operation the type sizes that can be legalized without having
to change the size of the type are specified with a call to setAction.
This isn't different to how GlobalISel worked before. For example, for a
target that supports 32 and 64 bit adds natively:
for (auto Ty : {s32, s64})
setAction({G_ADD, 0, s32}, Legal);
or for a target that needs a library call for a 32 bit division:
setAction({G_SDIV, s32}, Libcall);
The main conceptual change to the LegalizerInfo API, is in specifying
how to legalize the type sizes for which a change of size is needed. For
example, in the above example, how to specify how all types from i1 to
i8388607 (apart from s32 and s64 which are legal) need to be legalized
and expressed in terms of operations on the available legal sizes
(again, i32 and i64 in this case). Before, the implementation only
allowed specifying power-of-2-sized types (e.g. setAction({G_ADD, 0,
s128}, NarrowScalar). A worse limitation was that if you'd wanted to
specify how to legalize all the sized types as allowed by the LLVM-IR
LangRef, i1 to i8388607, you'd have to call setAction 8388607-3 times
and probably would need a lot of memory to store all of these
specifications.
Instead, the legalization actions that need to change the size of the
type are specified now using a "SizeChangeStrategy". For example:
setLegalizeScalarToDifferentSizeStrategy(
G_ADD, 0, widenToLargerAndNarrowToLargest);
This example indicates that for type sizes for which there is a larger
size that can be legalized towards, do it by Widening the size.
For example, G_ADD on s17 will be legalized by first doing WidenScalar
to make it s32, after which it's legal.
The "NarrowToLargest" indicates what to do if there is no larger size
that can be legalized towards. E.g. G_ADD on s92 will be legalized by
doing NarrowScalar to s64.
Another example, taken from the ARM backend is:
for (unsigned Op : {G_SDIV, G_UDIV}) {
setLegalizeScalarToDifferentSizeStrategy(Op, 0,
widenToLargerTypesUnsupportedOtherwise);
if (ST.hasDivideInARMMode())
setAction({Op, s32}, Legal);
else
setAction({Op, s32}, Libcall);
}
For this example, G_SDIV on s8, on a target without a divide
instruction, would be legalized by first doing action (WidenScalar,
s32), followed by (Libcall, s32).
The same principle is also followed for when the number of vector lanes
on vector data types need to be changed, e.g.:
setAction({G_ADD, LLT::vector(8, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(16, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(8, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(2, 32)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 32)}, LegalizerInfo::Legal);
setLegalizeVectorElementToDifferentSizeStrategy(
G_ADD, 0, widenToLargerTypesUnsupportedOtherwise);
As currently implemented here, vector types are legalized by first
making the vector element size legal, followed by then making the number
of lanes legal. The strategy to follow in the first step is set by a
call to setLegalizeVectorElementToDifferentSizeStrategy, see example
above. The strategy followed in the second step
"moreToWiderTypesAndLessToWidest" (see code for its definition),
indicating that vectors are widened to more elements so they map to
natively supported vector widths, or when there isn't a legal wider
vector, split the vector to map it to the widest vector supported.
Therefore, for the above specification, some example legalizations are:
* getAction({G_ADD, LLT::vector(3, 3)})
returns {WidenScalar, LLT::vector(3, 8)}
* getAction({G_ADD, LLT::vector(3, 8)})
then returns {MoreElements, LLT::vector(8, 8)}
* getAction({G_ADD, LLT::vector(20, 8)})
returns {FewerElements, LLT::vector(16, 8)}
2. Key implementation aspects.
How to legalize a specific (operation, type index, size) tuple is
represented by mapping intervals of integers representing a range of
size types to an action to take, e.g.:
setScalarAction({G_ADD, LLT:scalar(1)},
{{1, WidenScalar}, // bit sizes [ 1, 31[
{32, Legal}, // bit sizes [32, 33[
{33, WidenScalar}, // bit sizes [33, 64[
{64, Legal}, // bit sizes [64, 65[
{65, NarrowScalar} // bit sizes [65, +inf[
});
Please note that most of the code to do the actual lowering of
non-power-of-2 sized types is currently missing, this is just trying to
make it possible for targets to specify what is legal, and how non-legal
types should be legalized. Probably quite a bit of further work is
needed in the actual legalizing and the other passes in GlobalISel to
support non-power-of-2 sized types.
I hope the documentation in LegalizerInfo.h and the examples provided in the
various {Target}LegalizerInfo.cpp and LegalizerInfoTest.cpp explains well
enough how this is meant to be used.
This drops the need for LLT::{half,double}...Size().
Differential Revision: https://reviews.llvm.org/D30529
llvm-svn: 317560
Summary:
Calls using invoke in funclet based functions are assumed to clobber
all registers, which causes the stack adjustment using pops to consider
all registers not defined by the call to be undefined, which can
unfortunately include the base pointer, if one is needed.
To prevent this (and possibly other hazards), skip reserved registers
when looking for candidate registers.
This fixes issue #45034 in the Rust compiler.
Reviewers: mkuper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39636
llvm-svn: 317551
This combine was already done in two places. The
generic combiner already has done this since
r217610, for adds (with a single use).
This one was added in r303641, and added support for handling
or as well. r313251 later added support to the generic
combine for or. It also turns out the isOrEquivalentToAdd
check is not necessary for this combine.
Additionally, we already reproduce this combine in yet
another place in the backend, although in that version
multiple uses of the add are still folded if it will
allow a fold into the addressing mode. That version needs
to be improved to understand ors though, as well as the
correct legal offsets for private.
llvm-svn: 317526
The EVEX to VEX pass is already assuming this is true under AVX512VL. We had special patterns to use zmm instructions if VLX and F16C weren't available.
Instead just make AVX512 imply F16C to make the EVEX to VEX behavior explicitly legal and remove the extra patterns.
All known CPUs with AVX512 have F16C so this should safe for now.
llvm-svn: 317521
Previously our VEX patterns were checking Subtarget.hasFMA() which checked FMA || AVX512. So we were behaving as if AVX512 implied it anyway. Which means we'd allow VEX encoded 128/256 FMA when AVX512F was enabled but AVX512VL is off. Regardless of the FMA flag.
EVEX to VEX also transforms scalar EVEX FMA instructions to their VEX versions even without the FMA flag. Similarly for 128/256 under AVX512VL.
So this makes AVX512 imply FeatureFMA to make our current behavior explicit.
All known CPUs that support AVX512 have VEX FMA instructions.
llvm-svn: 317520
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/107104.html
and again more recently:
http://lists.llvm.org/pipermail/llvm-dev/2017-October/118118.html
...this is a step in cleaning up our fast-math-flags implementation in IR to better match
the capabilities of both clang's user-visible flags and the backend's flags for SDNode.
As proposed in the above threads, we're replacing the 'UnsafeAlgebra' bit (which had the
'umbrella' meaning that all flags are set) with a new bit that only applies to algebraic
reassociation - 'AllowReassoc'.
We're also adding a bit to allow approximations for library functions called 'ApproxFunc'
(this was initially proposed as 'libm' or similar).
...and we're out of bits. 7 bits ought to be enough for anyone, right? :) FWIW, I did
look at getting this out of SubclassOptionalData via SubclassData (spacious 16-bits),
but that's apparently already used for other purposes. Also, I don't think we can just
add a field to FPMathOperator because Operator is not intended to be instantiated.
We'll defer movement of FMF to another day.
We keep the 'fast' keyword. I thought about removing that, but seeing IR like this:
%f.fast = fadd reassoc nnan ninf nsz arcp contract afn float %op1, %op2
...made me think we want to keep the shortcut synonym.
Finally, this change is binary incompatible with existing IR as seen in the
compatibility tests. This statement:
"Newer releases can ignore features from older releases, but they cannot miscompile
them. For example, if nsw is ever replaced with something else, dropping it would be
a valid way to upgrade the IR."
( http://llvm.org/docs/DeveloperPolicy.html#ir-backwards-compatibility )
...provides the flexibility we want to make this change without requiring a new IR
version. Ie, we're not loosening the FP strictness of existing IR. At worst, we will
fail to optimize some previously 'fast' code because it's no longer recognized as
'fast'. This should get fixed as we audit/squash all of the uses of 'isFast()'.
Note: an inter-dependent clang commit to use the new API name should closely follow
commit.
Differential Revision: https://reviews.llvm.org/D39304
llvm-svn: 317488
We still early-out for X86ISD::PEXTRW/X86ISD::PEXTRB so no actual change in behaviour, but it'll make it easier to add support in a future patch.
llvm-svn: 317485
combineExtractWithShuffle can handle more complex shuffles/bitcasts than we can with the equivalent code in XFormVExtractWithShuffleIntoLoad.
Mainly a compile time improvement now (combineExtractWithShuffle combines will have always failed late on inside XFormVExtractWithShuffleIntoLoad), and will let us merge combineExtractVectorElt_SSE in a future commit.
llvm-svn: 317481
SystemZ can do division and remainder in a single instruction for scalar
integer types, which are now reflected by returning true in this hook for
those cases.
Review: Ulrich Weigand
llvm-svn: 317477
The backend assumes pointer in default addr space is 32 bit, which is not
true for the new addr space mapping and causes assertion for unresolved
functions.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D39643
llvm-svn: 317476
Previously, the 'movep' instruction was defined for microMIPS32r3 and
shared that definition with microMIPS32R6. 'movep' was re-encoded for
microMIPS32r6, so this patch provides the correct encoding.
Secondly, correct the encoding of the 'rs' and 'rt' operands which have
an instruction specific encoding for the registers those operands accept.
Finally, correct the decoding of the 'dst_regs' operand which was extracting
the relevant field from the instruction, but was actually extracting the
field from the alreadly extracted field.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39495
llvm-svn: 317475
Recommit:
This patch contains update of the costs of interleaved loads of v8f32 of stride 3 and 8.
fixed the location of the lit test it works with make check-all.
Differential Revision: https://reviews.llvm.org/D39403
llvm-svn: 317471
Mark all symbols involved with TLS relocations as being TLS symbols.
This resolves PR35140.
Thanks to Alex Crichton for reporting the issue!
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39591
llvm-svn: 317470
Added TESTM and TESTNM to the list of instructions that already zeroing unused upper bits
and does not need the redundant shift left and shift right instructions afterwards.
Added a pattern for TESTM and TESTNM in iselLowering, so now icmp(neq,and(X,Y), 0) goes folds into TESTM
and icmp(eq,and(X,Y), 0) goes folds into TESTNM
This commit is a preparation for lowering the test and testn X86 intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D38732
llvm-svn: 317465
Summary:
Try to lower a BUILD_VECTOR composed of extract-extract chains that can be
reasoned to be a permutation of a vector by indices in a non-constant vector.
We saw this pattern created by ISPC, which resolts to creating it due to the
requirement that shufflevector's mask operand be a *constant* vector.
I didn't check this but we could possibly use this pattern for lowering the X86 permute
C-instrinsics instead of llvm.x86 instrinsics.
This change can be followed by more improvements:
1. Handle vectors with undef elements.
2. Utilize pshufb and zero-mask-blending to support more effiecient
construction of vectors with constant-0 elements.
3. Use smaller-element vectors of same width, and "interpolate" the indices,
when no native operation available.
Reviewers: RKSimon, craig.topper
Reviewed By: RKSimon
Subscribers: chandlerc, DavidKreitzer
Differential Revision: https://reviews.llvm.org/D39126
llvm-svn: 317463
This patch, together with a matching clang patch (https://reviews.llvm.org/D38683), implements the lowering of X86 broadcastm intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D38684
Change-Id: I709ac0b34641095397e994c8ff7e15d1315b3540
llvm-svn: 317458
Next step is to use them for the legacy FMA scalar intrinsics as well. This will enable the legacy intrinsics to use EVEX encoded opcodes and the extended registers.
llvm-svn: 317453
reverted my changes will be committed later after fixing the failure
This patch contains update of the costs of interleaved loads of v8f32 of stride 3 and 8.
Differential Revision: https://reviews.llvm.org/D39403
llvm-svn: 317433
This patch contains update of the costs of interleaved loads of v8f32 of stride 3 and 8.
Differential Revision: https://reviews.llvm.org/D39403
llvm-svn: 317432
Summary:
AVX512 added RCP14 and RSQRT instructions which improve accuracy over the legacy RCP and RSQRT instruction, but not enough accuracy to remove the need for a Newton Raphson refinement.
Currently we use these new instructions for the legacy packed SSE instrinics, but not the scalar instrinsics. And we use it for fast math optimization of division and reciprocal sqrt.
I think switching the legacy instrinsics maybe surprising to the user since it changes the answer based on which processor you're using regardless of any fastmath settings. It's also weird that we did something different between scalar and packed.
As far at the reciprocal estimation, I think it creates unnecessary deltas in our output behavior (and prevents EVEX->VEX). A little playing around with gcc and icc and godbolt suggest they don't change which instructions they use here.
This patch adds new X86ISD nodes for the RCP14/RSQRT14 and uses those for the new intrinsics. Leaving the old intrinsics to use the old instructions.
Going forward I think our focus should be on
-Supporting 512-bit vectors, which will have to use the RCP14/RSQRT14.
-Using RSQRT28/RCP28 to remove the Newton Raphson step on processors with AVX512ER
-Supporting double precision.
Reviewers: zvi, DavidKreitzer, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39583
llvm-svn: 317413
AMDGPULibFunc hardcodes address space values of the old address space mapping,
which causes invalid addrspacecast instructions and undefined functions in
APPSDK sample MonteCarloAsianDP.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D39616
llvm-svn: 317409
This allows masked operations to be used and allows the register allocator to use YMM16-31 if necessary.
As a follow up I'll look into teaching EVEX->VEX how to turn this back into PERM2X128 if any of the additional features don't work out.
llvm-svn: 317403
This header already includes a CodeGen header and is implemented in
lib/CodeGen, so move the header there to match.
This fixes a link error with modular codegeneration builds - where a
header and its implementation are circularly dependent and so need to be
in the same library, not split between two like this.
llvm-svn: 317379
The number of iterations was incorrectly determined for DP FP vector types
and the tests were insufficient to flag this issue.
Differential revision: https://reviews.llvm.org/D39507
llvm-svn: 317349
Change the ISel matching of 'ins', 'dins[mu]' from tablegen code to
C++ code. This resolves an issue where ISel would select 'dins' instead
of 'dinsm' when the instructions size and position were individually in
range but their sum was out of range according to the ISA specification.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39117
llvm-svn: 317331
Similar to the existing code to lower to PACKSS, we can use PACKUS if the input vector's leading zero bits extend all the way to the packed/truncated value.
We have to account for pre-SSE41 targets not supporting PACKUSDW
llvm-svn: 317315
We're currently bailing out for Thumb targets while lowering formal
parameters, but there used to be some other checks before it, which
could've caused some functions (e.g. those without formal parameters) to
sneak through unnoticed.
llvm-svn: 317312
Ideally we should probably produce WinEH here as well, but until
then, we can use dwarf exceptions, without any further changes
required in clang, libunwind or libcxxabi.
Differential Revision: https://reviews.llvm.org/D39535
llvm-svn: 317304
This fixes http://llvm.org/PR32560. We were missing a description for
half floating point type and as a result were using the FPR 32 mapping.
Because of the size mismatch the generic code was complaining that the
default mapping is not appropriate. Fix the mapping description so that
the default mapping can be properly applied.
llvm-svn: 317287
MSA stores and loads to the stack are more likely to require an
emergency GPR spill slot due to the smaller offsets available
with those instructions.
Handle this by overestimating the size of the stack by determining
the largest offset presuming that all callee save registers are
spilled and accounting of incoming arguments when determining
whether an emergency spill slot is required.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39056
llvm-svn: 317204
Craig Topper