In certain places in the code we can never end up in a situation where
we're mixing fixed width and scalable vector types. For example,
we can't have truncations and extends that change the lane count. Also,
in other places such as GenWidenVectorStores and GenWidenVectorLoads we
know from the behaviour of FindMemType that we can never choose a vector
type with a different scalable property.
In various places I have used EVT::bitsXY functions instead of
TypeSize::isKnownXY, where it probably makes sense to keep an assert
that scalable properties match.
Differential Revision: https://reviews.llvm.org/D88654
As requested in D89346. This allows us to add some early outs.
I reordered some checks a little bit to make the more common bail outs happen earlier. Like checking opcode before checking hasOneUse. And I moved the bit width check to make sure it was safe to look through a truncate to the spot where we look through truncates instead of after.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D89494
This combine can look through (trunc (ctpop X)). When doing this
it tries to make sure the trunc doesn't lose any information
from the ctpop. It does this by checking that the truncated type
has more bits that Log2_32_Ceil of the ctpop type. The Ceil is
unnecessary and pessimizes non-power of 2 types.
For example, ctpop of i256 requires 9 bits to represent the max
value of 256. But ctpop of i255 only requires 8 bits to represent
the max result of 255. Log2_32_Ceil of 256 and 255 both return 8
while Log2_32 returns 8 for 256 and 7 for 255
The code with popcnt enabled is a regression for this test case,
but it does match what already happens with i256 truncated to i9.
Since power of 2 is more likely, I don't think it should block
this change.
Differential Revision: https://reviews.llvm.org/D89412
When given the -experimental-debug-variable-locations option (via -Xclang
or to llc), have SelectionDAG generate DBG_INSTR_REF instructions instead
of DBG_VALUE. For now, this only happens in a limited circumstance: when
the value referred to is not a PHI and is defined in the current block.
Other situations introduce interesting problems, addresed in later patches.
Practically, this patch hooks into InstrEmitter and if it can find a
defining instruction for a value, gives it an instruction number, and
points the DBG_INSTR_REF at that <instr, operand> pair.
Differential Revision: https://reviews.llvm.org/D85747
This passes existing X86 test but I'm not sure if it handles all type
legalization cases it needs to.
Alternative to D89200
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D89222
Based on a discussion on D88783, if we're promoting a funnel shift to a width at least twice the size as the original type, then we can use the 'double shift' patterns (shifting the concatenated sources).
Differential Revision: https://reviews.llvm.org/D89139
I have introduced a new template PolySize class, where the template
parameter determines the type of quantity, i.e. for an element
count this is just an unsigned value. The ElementCount class is
now just a simple derivation of PolySize<unsigned>, whereas TypeSize
is more complicated because it still needs to contain the uint64_t
cast operator, since there are still many places in the code that
rely upon this implicit cast. As such the class also still needs
some of it's own operators.
I've tried to minimise the amount of code in the base PolySize
class, which led to a couple of changes:
1. In some places we were relying on '==' operator comparisons
between ElementCounts and the scalar value 1. I didn't put this
operator in the new PolySize class, and thought it was actually
clearer to use the isScalar() function instead.
2. I removed the isByteSized function and replaced it with calls
to isKnownMultipleOf(8).
I've also renamed NextPowerOf2 to be coefficientNextPowerOf2 so
that it's more consistent with coefficientDivideBy.
Differential Revision: https://reviews.llvm.org/D88409
Currently we allow passing pointers from deopt bundle on VReg only if
they were seen in list of gc-live pointers passed on VRegs.
This means that for the case of empty gc-live bundle we spill deopt
bundle's pointers. This change allows lowering deopt pointers to VRegs
in case of empty gc-live bundle. In case of non-empty gc-live bundle,
behavior does not change.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D88999
Summary: This patch is derived from D87384.
In this patch we expand the existing decomposition of mul-by-constant to be more general by implementing 2 patterns:
```
mul x, (2^N + 2^M) --> (add (shl x, N), (shl x, M))
mul x, (2^N - 2^M) --> (sub (shl x, N), (shl x, M))
```
The conversion will be trigged if the multiplier is a big constant that the target can't use a single multiplication instruction to handle. This is controlled by the hook `decomposeMulByConstant`.
More over, the conversion benefits from an ILP improvement since the instructions are independent. A case with the sequence like following also gets benefit since a shift instruction is saved.
```
*res1 = a * 0x8800;
*res2 = a * 0x8080;
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D88201
The STRICT was causing unnecessary confusion. I think SEQ is a more accurate
name for what they actually do, and the other obvious option of "ORDERED"
has the issue of already having a meaning in FP contexts.
Differential Revision: https://reviews.llvm.org/D88791
We were already doing this for integer constants. This patch implements
the same thing for floating point constants.
Differential Revision: https://reviews.llvm.org/D88570
Current Statepoint MI format is this:
STATEPOINT
<id>, <num patch bytes >, <num call arguments>, <call target>,
[call arguments...],
<StackMaps::ConstantOp>, <calling convention>,
<StackMaps::ConstantOp>, <statepoint flags>,
<StackMaps::ConstantOp>, <num deopt args>, [deopt args...],
<gc base/derived pairs...> <gc allocas...>
Note that GC pointers are listed in pairs <base,derived>.
This causes base pointers to appear many times (at least twice) in
instruction, which is bad for us when VReg lowering is ON.
The problem is that machine operand tiedness is 1-1 relation, so
it might look like this:
%vr2 = STATEPOINT ... %vr1, %vr1(tied-def0)
Since only one instance of %vr1 is tied, that may lead to incorrect
codegen (see PR46917 for more details), so we have to always spill
base pointers. This mostly defeats new VReg lowering scheme.
This patch changes statepoint instruction format so that every
gc pointer appears only once in operand list. That way they all can
be tied. Additional set of operands is added to preserve base-derived
relation required to build stackmap.
New statepoint has following format:
STATEPOINT
<id>, <num patch bytes>, <num call arguments>, <call target>,
[call arguments...],
<StackMaps::ConstantOp>, <calling convention>,
<StackMaps::ConstantOp>, <statepoint flags>,
<StackMaps::ConstantOp>, <num deopt args>, [deopt args...],
<StackMaps::ConstantOp>, <num gc pointers>, [gc pointers...],
<StackMaps::ConstantOp>, <num gc allocas>, [gc allocas...]
<StackMaps::ConstantOp>, <num entries in gc map>, [base/derived indices...]
Changes are:
- every gc pointer is listed only once in a flat length-prefixed list;
- alloca list is prefixed with its length too;
- following alloca list is length-prefixed list of base-derived
indices of pointers from gc pointer list. Note that indices are
logical (number of pointer), not absolute (index of machine operand).
Differential Revision: https://reviews.llvm.org/D87154
In DAGCombiner::ForwardStoreValueToDirectLoad I have fixed up some
implicit casts from TypeSize -> uint64_t and replaced calls to
getVectorNumElements() with getVectorElementCount(). There are some
simple cases of forwarding that we can definitely support for
scalable vectors, i.e. when the store and load are both scalable
vectors and have the same size. I have added tests for the new
code paths here:
CodeGen/AArch64/sve-forward-st-to-ld.ll
Differential Revision: https://reviews.llvm.org/D87098
getNode handling for ISD:SETCC calls FoldSETCC which can canonicalize
FP constants to the RHS. When this happens we should create the node
with the FMF that was requested. By using FlagInserter when can ensure
any calls to getNode/getSetcc during canonicalization will also get the flags.
Differential Revision: https://reviews.llvm.org/D88063
I have fixed up a number of warnings resulting from TypeSize -> uint64_t
casts and calling getVectorNumElements() on scalable vector types. I
think most of the changes are fairly trivial except for those in
DAGTypeLegalizer::SplitVecRes_MSTORE I've tried to ensure we create
the MachineMemoryOperands in a sensible way for scalable vectors.
I have added a CHECK line to the following test:
CodeGen/AArch64/sve-split-store.ll
that ensures no new warnings are added.
Differential Revision: https://reviews.llvm.org/D86928
This reverts partial of a2fb5446 (actually, 2508ef01) about removing
negated FP constant immediately if it has no uses. However, as discussed
in bug 47517, there're cases when NegX is folded into constant from
other places while NegY is removed by that line of code and NegX is
equal to NegY. In these cases, NegX is deleted before used and crash
happens. So revert the code and add necessary test case.
In the motivating case from https://llvm.org/PR47517
we create a node that does not get constant folded
before getNegatedExpression is attempted from some
other node, and we crash.
By moving the fold into SelectionDAG::simplifyFPBinop(),
we get the constant fold sooner and avoid the problem.
This is similar to D87251, but for CopyFromRegs nodes.
Even for local statepoint uses we generate CopyToRegs/CopyFromRegs
nodes. When generating CopyFromRegs in visitGCRelocate, we must chain
to current DAG root, not EntryNode, to ensure proper ordering of copy
w.r.t. statepoint node producing result for it.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D88639
When we know that a particular type is always going to be fixed
width we have so far been writing code like this:
getSizeInBits().getFixedSize()
Since we are doing this in quite a few places now it seems to make
sense to add a new helper function that allows us to replace
these calls with a single getFixedSizeInBits() call.
Differential Revision: https://reviews.llvm.org/D88649
This patch adds FP_EXTEND_MERGE_PASSTHRU & FP_ROUND_MERGE_PASSTHRU
ISD nodes, used to lower scalable vector fp_extend/fp_round operations.
fp_round has an additional argument, the 'trunc' flag, which is an integer of zero or one.
This also fixes a warning introduced by the new tests added to sve-split-fcvt.ll,
resulting from an implicit TypeSize -> uint64_t cast in SplitVecOp_FP_ROUND.
Reviewed By: sdesmalen, paulwalker-arm
Differential Revision: https://reviews.llvm.org/D88321
After some recent upstream discussion we decided that it was best
to avoid having the / operator for both ElementCount and TypeSize,
since this could give the impression that these classes can be used
in the same way as basic integer integer types. However, division
for scalable types is a bit odd because we are only dividing the
minimum quantity by a value, as opposed to something like:
(MinSize * Vscale) / SomeValue
This is why when performing division it's important the caller
first establishes whether the operation makes sense, perhaps by
calling isKnownMultipleOf() prior to division. The caller must now
explictly call divideCoefficientBy() on the class to perform the
operation.
Differential Revision: https://reviews.llvm.org/D87700
Use +/-Inf or +/-Largest as neutral element for nnan fmin/fmax
reductions. This avoids dropping any FMF flags. Preserving the
nnan flag in particular is important to get a good lowering on X86.
Differential Revision: https://reviews.llvm.org/D87586
If we're multiplying all elements of a vector by '0' or '1' then we can more efficiently perform this as a clearing mask (that is likely to further simplify to a shuffle blend).
This was noticed when reviewing D87502 but seems to help idiv/irem by constant cases even more as '0'/'1' values are often used for 'passthrough' cases.
Differential Revision: https://reviews.llvm.org/D88225
This is like FastMathFlagGuard in IR. Since we use SDAG instance to get
values, it's with SelectionDAG. By creating a FlagInserter in current
scope, all values created by getNode will get the flags if no Flags
argument provided.
In this patch, I applied it to floating point operations folding part in
DAG combiner, and removed Flags passing to getNode to show its effect.
Other places in DAG combiner and other helper methods similar to getNode
also need this. They can be done in follow-up patches.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D87361
When processing PHI nodes after a callbr, we need to make sure that the
PHI nodes on the default branch are resolved after the callbr
(inserted after INLINEASM_BR). The PHI node values on the indirect
branches are processed before the INLINEASM_BR.
Differential Revision: https://reviews.llvm.org/D86260
Previously, if a floating-point type was legal, but FNEG wasn't legal,
we would use FSUB. Instead, we should use integer ops, to preserve the
semantics. (Alternatively, there's a compiler-rt call we could use, but
there isn't much reason to use that.)
It turns out we actually are still using this obscure codepath in a few
cases: on some targets, we have "legal" floating-point types that don't
actually support any floating-point operations. In particular, ARM and
AArch64 are using this path.
The implementation for SelectionDAG is pretty simple because we can
reuse the infrastructure from FCOPYSIGN.
See also 9a3dc3e, the corresponding change to type legalization.
Also includes a "bonus" change to STRICT_FSUB legalization, so we can
lower a STRICT_FSUB to a float libcall.
Includes the changes to both LegalizeDAG and GlobalISel so we don't have
inconsistent results in the future.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46792 .
Differential Revision: https://reviews.llvm.org/D84287
An existing function Type::getScalarSizeInBits returns a uint64_t
instead of a TypeSize class because the caller is requesting a
scalar size, which cannot be scalable. This patch makes other
similar functions requesting a scalar size consistent with that,
thereby eliminating more than 1000 implicit TypeSize -> uint64_t
casts.
Differential revision: https://reviews.llvm.org/D87889
Just scalarize trunc stores - GenWidenVectorTruncStores does the same thing but is flawed (PR42046) and unused.
Differential Revision: https://reviews.llvm.org/D87708
When exporting statepoint results to virtual registers we try to avoid
generating exports for duplicated inputs. But we erroneously use
IR Value* to check if inputs are duplicated. Instead, we should use
SDValue, because even different IR values can get lowered to the same
SDValue.
I'm adding a (degenerate) test case which emphasizes importance of this
feature for invoke statepoints.
If we fail to export only unique values we will end up with something
like that:
%0 = STATEPOINT
%1 = COPY %0
landing_pad:
<use of %1>
And when exceptional path is taken, %1 is left uninitialized (COPY is never
execute).
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D87695
This reverts commit 0345d88de6.
Google internal backend uses EntrySU, we are looking into removing
dependency on it.
Differential Revision: https://reviews.llvm.org/D88018
SelectionDAGBuilder was inconsistently mangling values based on ABI
Calling Conventions when getting them through copyFromRegs in
SelectionDAGBuilder, causing duplicate value type convertions for
function arguments. The checking for the mangling requirement was based
on the value's originating instruction and was performed outside of, and
inspite of, the regular Calling Convention Lowering.
The issue could be observed in a scenario such as:
```
%arg1 = load half, half* %const, align 2
%arg2 = call fastcc half @someFunc()
call fastcc void @otherFunc(half %arg1, half %arg2)
; Here, %arg2 was incorrectly mangled twice, as the CallConv data from
; the call to @someFunc() was taken into consideration for the check
; when getting the value for processing the call to @otherFunc(...),
; after the proper convertion had taken place when lowering the return
; value of the first call.
```
This patch fixes the issue by disregarding the Calling Convention
information for such copyFromRegs, making sure the ABI mangling is
properly contanined in the Calling Convention Lowering.
This fixes Bugzilla #47454.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87844
This is a follow-up of D86605. For strict DAG FP node, if its FP
exception behavior metadata is ignore, it should have nofpexcept flag.
But during custom lowering, this flag isn't passed down.
This is also seen on X86 target.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D87390
2508ef01 fixed a bug about constant removal in negation. But after
sanitizing check I found there's still some issue about it so it's
reverted.
Temporary nodes will be removed if useless in negation. Before the
removal, they'd be checked if any other nodes used it. So the removal
was moved after getNode. However in rare cases the node to be removed is
the same as result of getNode. We missed that and will be fixed by this
patch.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D87614
If we have an all ones mask, we can just a regular masked load. InstCombine already gets this in IR. But the all ones mask can appear after type legalization.
Only avx512 test cases are affected because X86 backend already looks for element 0 and the last element being 1. It replaces this with an unmasked load and blend. The all ones mask is a special case of that where the blend will be removed. That transform is only enabled on avx2 targets. I believe that's because a non-zero passthru on avx2 already requires a separate blend so its more profitable to handle mixed constant masks.
This patch adds a dedicated all ones handling to the target independent DAG combiner. I've skipped extending, expanding, and index loads for now. X86 doesn't use index so I don't know much about it. Extending made me nervous because I wasn't sure I could trust the memory VT had the right element count due to some weirdness in vector splitting. For expanding I wasn't sure if we needed different undef handling.
Differential Revision: https://reviews.llvm.org/D87788
Fix lowering and instruction selection for v3x16 types
and enable InstCombine to emit them.
This patch only implements it for the selection dag.
GlobalISel tests in GlobalISel/llvm.amdgcn.image.load.1d.d16.ll and
GlobalISel/llvm.amdgcn.image.store.2d.d16.ll still don't work.
Differential Revision: https://reviews.llvm.org/D84420
2508ef01 doesn't totally fix the issue since we did not handle the case
when unused temporary negated result is the same with the result, which
is found by address sanitizer.
960cbc53 immediately removes nodes that won't be used to avoid
compilation time explosion. This patch adds the removal to constants to
fix PR47517.
Reviewed By: RKSimon, steven.zhang
Differential Revision: https://reviews.llvm.org/D87614
The versions that take 'unsigned' will be removed in the future.
I tried to use getOriginalAlign instead of getAlign in some
places. getAlign factors in the minimum alignment implied by
the offset in the pointer info. Since we're also passing the
pointer info we can use the original alignment.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87592
The code that decomposes the GEP into ADD/MUL doesn't work properly
for vector GEPs. It can create bad COPY instructions or possibly
assert.
For now just bail out to SelectionDAG.
Fixes PR45906
This adds SoftenFloatRes, PromoteFloatRes and SoftPromoteHalfRes
legalizations for VECREDUCE, to fill the remaining hole in the SDAG
legalization. These legalizations simply expand the reduction and
let it be recursively legalized. For the PromoteFloatRes case at
least it is possible to do better than that, but it's pretty tricky
(because we need to consider the interaction of three different
vector legalizations and the type promotion) and probably not
really worthwhile.
I haven't added ExpandFloatRes support, as I am not familiar with
ppc_fp128.
Differential Revision: https://reviews.llvm.org/D87569
Similar to D87415, this folds the various float min/max opcodes
with a constant INF or -INF operand, or FLT_MAX / -FLT_MAX operand
if the ninf flag is set. Some of the folds are only possible under
nnan.
The fminnum(X, INF) with nnan and fmaxnum(X, -INF) with nnan cases
are needed to improve the VECREDUCE_FMIN/FMAX lowerings on X86,
the rest is here for the sake of completeness.
Differential Revision: https://reviews.llvm.org/D87571
In an earlier patch I meant to add the correct flags to the ADD
node when incrementing the pointer, but forgot to pass them to
SelectionDAG::getNode.
Differential Revision: https://reviews.llvm.org/D87496
Previously, we formed ISD::PARITY by looking for (and (ctpop X), 1)
but the AND might be separated from the ctpop. For example if the
parity result is multiplied by 2, we'll pull the AND through the
shift.
So to handle more cases, move to SimplifyDemandedBits where we
can handle more cases that result in only the LSB of the CTPOP
being used.
DAG combiner folds (fma a 1.0 b) into (fadd a b) but the flag isn't
propagated into new fadd. This patch fixes that.
Some code in visitFMA is redundant and such support for vector constants
is missing. Need follow-up patch to clean.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D87037
CTTZ, CTLZ, CTPOP, and FCANONICALIZE all have the same input and
output types so the operand should have already been legalized when the
result type was legalized.
Clang emits (and (ctpop X), 1) for __builtin_parity. If ctpop
isn't natively supported by the target, this leads to poor codegen
due to the expansion of ctpop being more complex than what is needed
for parity.
This adds a DAG combine to convert the pattern to ISD::PARITY
before operation legalization. Type legalization is updated
to handled Expanding and Promoting this operation. If after type
legalization, CTPOP is supported for this type, LegalizeDAG will
turn it back into CTPOP+AND. Otherwise LegalizeDAG will emit a
series of shifts and xors followed by an AND with 1.
I've avoided vectors in this patch to avoid more legalization
complexity for this patch.
X86 previously had a custom DAG combiner for this. This is now
moved to Custom lowering for the new opcode. There is a minor
regression in vector-reduce-xor-bool.ll, but a follow up patch
can easily fix that.
Fixes PR47433
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87209
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/140729.html
This is hopefully the final remaining showstopper before we can remove
the 'experimental' from the reduction intrinsics.
No behavior was specified for the FP min/max reductions, so we have a
mess of different interpretations.
There are a few potential options for the semantics of these max/min ops.
I think this is the simplest based on current behavior/implementation:
make the reductions inherit from the existing llvm.maxnum/minnum intrinsics.
These correspond to libm fmax/fmin, and those are similar to the (now
deprecated?) IEEE-754 maxNum/minNum functions (NaNs are treated as missing
data). So the default expansion creates calls to libm functions.
Another option would be to inherit from llvm.maximum/minimum (NaNs propagate),
but most targets just crash in codegen when given those nodes because no
default expansion was ever implemented AFAICT.
We could also just assume 'nnan' semantics by default (we are already
assuming 'nsz' semantics in the maxnum/minnum intrinsics), but some targets
(AArch64, PowerPC) support the more defined behavior, so it doesn't make much
sense to not allow a tighter spec. Fast-math-flags (nnan) can be used to
loosen the semantics.
(Note that D67507 was proposed to update the LangRef to acknowledge the more
recent IEEE-754 2019 standard, but that patch seems to have stalled. If we do
update based on the new standard, the reduction instructions can seamlessly
inherit from whatever updates are made to the max/min intrinsics.)
x86 sees a regression here on 'nnan' tests because we have underlying,
longstanding bugs in FMF creation/propagation. Those need to be fixed apart
from this change (for example: https://llvm.org/PR35538). The expansion
sequence before this patch may not have been correct.
Differential Revision: https://reviews.llvm.org/D87391
Truncating from an illegal SVE type to a legal type, e.g.
`trunc <vscale x 4 x i64> %in to <vscale x 4 x i32>`
fails after PromoteIntOp_CONCAT_VECTORS attempts to
create a BUILD_VECTOR.
This patch changes the promote function to create a sequence of
INSERT_SUBVECTORs if the return type is scalable, and replaces
these with UNPK+UZP1 for AArch64.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D86548
fminnum(X, NaN) is X, fminimum(X, NaN) is NaN. This mirrors the
behavior of existing InstSimplify folds.
This is expected to improve the reduction lowerings in D87391,
which use NaN as a neutral element.
Differential Revision: https://reviews.llvm.org/D87415
During the main DAGCombine loop, whenever a node gets replaced, the new
node and all its users are pushed onto the worklist. Omit this if the
new node is the EntryToken (e.g. if a store managed to get optimized
out), because re-visiting the EntryToken and its users will not uncover
any additional opportunities, but there may be a large number of such
users, potentially causing compile time explosion.
This compile time explosion showed up in particular when building the
SingleSource/UnitTests/matrix-types-spec.cpp test-suite case on any
platform without SIMD vector support.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86963
Since we always generate CopyToRegs for statepoint results,
we must update DAG root after emitting statepoint, so that
these copies are scheduled before any possible local uses.
Note: getControlRoot() flushes all PendingExports, not only
those we generates for relocates. If that'll become a problem,
we can change it to flushing relocate exports only.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D87251
Current code in InstEmitter assumes all GC pointers are either
VRegs or stack slots - hence, taking only one operand.
But it is possible to have constant base, in which case it
occupies two machine operands.
Add a convinience function to StackMaps to get index of next
meta argument and use it in InsrEmitter to properly advance to
the next statepoint meta operand.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D87252
This removes the after the fact FMF handling from D46854 in favor of passing fast math flags to getNode. This should be a superset of D87130.
This required adding a SDNodeFlags to SelectionDAG::getSetCC.
Now we manage to contant fold some stuff undefs during the
initial getNode that we don't do in later DAG combines.
Differential Revision: https://reviews.llvm.org/D87200
On SystemZ, a ZERO_EXTEND of an i1 vector handled by WidenVecRes_Convert()
always ended up being scalarized, because the type action of the input is
promotion which was previously an unhandled case in this method.
This fixes https://bugs.llvm.org/show_bug.cgi?id=47132.
Differential Revision: https://reviews.llvm.org/D86268
Patch by Eli Friedman.
Review: Ulrich Weigand
Rather than using SELECT instructions, use SRA, UADDO/ADDCARRY and
XORs to expand ABS. This is the multi-part version of the sequence
we use in LegalizeDAG.
It's also the same as the Custom sequence uses for i64 on 32-bit
and i128 on 64-bit. So we can remove the X86 customization.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D87215
This is a follow-up suggested in D86420 - if we have a pair of stores
in inverted order for the target endian, we can rotate the source
bits into place.
The "be_i64_to_i16_order" test shows a limitation of the current
function (which might be avoided if we integrate this function with
the other cases in mergeConsecutiveStores). In the earlier
"be_i64_to_i16" test, we skip the first 2 stores because we do not
match the full set as consecutive or rotate-able, but then we reach
the last 2 stores and see that they are an inverted pair of 16-bit
stores. The "be_i64_to_i16_order" test alters the program order of
the stores, so we miss matching the sub-pattern.
Differential Revision: https://reviews.llvm.org/D87112
In getMemcpyLoadsAndStores(), a memcpy where the source is a zero constant is expanded to a MemOp::Set instead of a MemOp::Copy, even when the memcpy is volatile.
This is incorrect.
The fix is to add a check for volatile, and expand to MemOp::Copy in the volatile case.
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D87134
Previously SDNodeFlags::instersectWith(Flags) would do nothing if Flags was
in an undefined state, which is very bad given that this is the default when
getNode() is called without passing an explicit SDNodeFlags argument.
This meant that if an already existing and reused node had a flag which the
second caller to getNode() did not set, that flag would remain uncleared.
This was exposed by https://bugs.llvm.org/show_bug.cgi?id=47092, where an NSW
flag was incorrectly set on an add instruction (which did in fact overflow in
one of the two original contexts), so when SystemZElimCompare removed the
compare with 0 trusting that flag, wrong-code resulted.
There is more that needs to be done in this area as discussed here:
Differential Revision: https://reviews.llvm.org/D86871
Review: Ulrich Weigand, Sanjay Patel
I have fixed up some more ElementCount/TypeSize related warnings in
the following tests:
CodeGen/AArch64/sve-split-extract-elt.ll
CodeGen/AArch64/sve-split-insert-elt.ll
In SelectionDAG::CreateStackTemporary we were relying upon the implicit
cast from TypeSize -> uint64_t when calling MachineFrameInfo::CreateStackObject.
I've fixed this by passing in the known minimum size instead, which I
believe is fine because the associated stack id indicates whether this
is a scalable object or not.
I've also fixed up a case in TargetLowering::SimplifyDemandedBits when
extracting a vector element from a scalable vector. The result is a scalar,
hence it wasn't caught at the start of the function. If the vector is
scalable we just bail out for now.
Differential Revision: https://reviews.llvm.org/D86431
Use forward declarations and move the include down to dependent files that actually use it.
This also exposes a number of implicit dependencies on KnownBits.h
When lowering fixed length vector operations for SVE the subvector
operations are used extensively to marshall data between scalable
and fixed-length vectors. This means that sequences like:
extract_subvec(binop(insert_subvec(a), insert_subvec(b)))
are very common. DAGCombine only checks if the resulting binop is
legal or can be custom lowered when undoing such sequences. When
it's custom lowering that is introducing them the result is an
infinite legalise->combine->legalise loop.
This patch extends the isOperationLegalOr... functions to include
a "LegalOnly" parameter to restrict the check to legal operations
only. Although isOperationLegal could be used it's common for
the affected code paths to be visited pre and post legalisation,
so the extra parameter keeps the code tidy.
Differential Revision: https://reviews.llvm.org/D86450
Unwinders may only preserve the lower 64bits of Neon and SVE registers,
as only the registers in the base ABI are guaranteed to be preserved
over the exception edge. The caller will need to preserve additional
registers for when the call throws an exception and the unwinder has
tried to recover state.
For e.g.
svint32_t bar(svint32_t);
svint32_t foo(svint32_t x, bool *err) {
try { bar(x); } catch (...) { *err = true; }
return x;
}
`z0` needs to be spilled before the call to `bar(x)` and reloaded before
returning from foo, as the exception handler may have clobbered z0.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84737
I have fixed up a number of warnings resulting from TypeSize -> uint64_t
casts and calling getVectorNumElements() on scalable vector types. I
think most of the changes are fairly trivial except for those in
DAGTypeLegalizer::SplitVecRes_MLOAD I've tried to ensure we create
the MachineMemoryOperands in a sensible way for scalable vectors.
I have added a CHECK line to the following test:
CodeGen/AArch64/sve-split-load.ll
that ensures no new warnings are added.
Differential Revision: https://reviews.llvm.org/D86697
fabs and fneg share a common transformation:
(fneg (bitconvert x)) -> (bitconvert (xor x sign))
(fabs (bitconvert x)) -> (bitconvert (and x ~sign))
This patch separate the code into a single method.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86862
I tried to fix this in:
rG716e35a0cf53
...but that patch depends on the order that we encounter the
magic "x/sqrt(x)" expression in the combiner's worklist.
This patch should improve that by waiting until we walk the
user list to decide if there's a use to skip.
The AArch64 test reveals another (existing) ordering problem
though - we may try to create an estimate for plain sqrt(x)
before we see that it is part of a 1/sqrt(x) expression.
In general, we probably want to try the multi-use reciprocal
transform before sqrt transforms, but x/sqrt(x) is a special-case
because that will always reduce to plain sqrt(x) or an estimate.
The AArch64 tests show that the transform is limited by TLI
hook to patterns where there are 3 or more uses of the divisor.
So this change can result in an extra division compared to
what we had, but that's the intended behvior based on the
current setting of that hook.
Current `v:t = zext(setcc x,y,cc)` will be transformed to `select x, y, 1:t, 0:t, cc`. It misses some opportunities if x's type size is less than `t`'s size. This patch enhances the above transformation.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86687
There is a subtle problem with new statepoint lowering scheme
when base and pointers are the same (see PR46917 for more context):
%1 = STATEPOINT ... %0, %0(tied-def 0)...
if, for some reason, register allocator desides to put two instances
of %0 into two different objects (registers or spill slots), we may
end up with
$reg3 = STATEPOINT ... $reg2, $reg1(tied-def 0)...
and nothing will prevent later passes to sink uses of $reg2 below
statepoint, which is incorrect.
As a short term solution, always put base pointers on stack during
lowering.
A longer term solution may be to rework MIR statepoint format to
avoid GC pointer duplication in statepoint argument list.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D86712
This is the follow up patch for https://reviews.llvm.org/D86183 as we miss to delete the node if NegX == NegY, which has use after we create the node.
```
if (NegX && (CostX <= CostY)) {
Cost = std::min(CostX, CostZ);
RemoveDeadNode(NegY);
return DAG.getNode(Opcode, DL, VT, NegX, Y, NegZ, Flags); #<-- NegY is used here if NegY == NegX.
}
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86689
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
When joining the legal parts of vector arguments into its original value
during the lower of Formal Arguments in SelectionDAGBuilder, the Calling
Convention information was not being propagated for the handling of each
individual parts. The same did not happen when lowering calls, causing a
mismatch.
This patch fixes the issue by properly propagating the Calling
Convention details.
This fixes Bugzilla #47001.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86715
This is the first of a set of DAGCombiner changes enabling strictfp
optimizations. I want to test to waters with this to make sure changes
like these are acceptable for the strictfp case- this particular change
should preserve exception ordering and result precision perfectly, and
many other possible changes appear to be able to as well.
Copied from regular fadd combines but modified to preserve ordering via
the chain, this change allows strict_fadd x, (fneg y) to become
struct_fsub x, y and strict_fadd (fneg x), y to become strict_fsub y, x.
Differential Revision: https://reviews.llvm.org/D85548
We have a gap in our store merging capabilities for shift+truncate
patterns as discussed in:
https://llvm.org/PR46662
I generalized the code/comments for this function in earlier commits,
so we only need ease the type restriction and adjust the address/endian
checking to make this work.
AArch64 lets us switch endian to make sure that patterns are matched
either way.
Differential Revision: https://reviews.llvm.org/D86420
This adapts legalization of intrinsic get.active.lane.mask to the new semantics
as described in D86147. Because the second argument is now the loop tripcount,
we legalize this intrinsic to an 'icmp ULT' instead of an ULE when it was the
backedge-taken count.
Differential Revision: https://reviews.llvm.org/D86302
Also updates isConstOrConstSplatFP to allow the mul(A,-1) -> neg(A)
transformation when -1 is expressed as an ISD::SPLAT_VECTOR.
Differential Revision: https://reviews.llvm.org/D86415
With FMF ( "nsz" and " reassoc") fold X/Sqrt(X) to Sqrt(X).
This is done after targets have the chance to produce a
reciprocal sqrt estimate sequence because that expansion
is probably more efficient than an expansion of a
non-reciprocal sqrt. That is also why we deferred doing
this transform in IR (D85709).
Differential Revision: https://reviews.llvm.org/D86403
D77152 tried to do this but got it wrong in the shift-by-zero case.
D86430 reverted the wrong code. Reimplement the optimization with
different code depending on whether the shift amount is known to be
non-zero (modulo bitwidth).
This improves code quality for fshl tests on AMDGPU, which only has an
fshr instruction.
Differential Revision: https://reviews.llvm.org/D86438
This is a fixup of commit 0819a6416f (D77152) which could
result in miscompiles. The miscompile could only happen for targets
where isOperationLegalOrCustom could return different values for
FSHL and FSHR.
The commit mentioned above added logic in expandFunnelShift to
convert between FSHL and FSHR by swapping direction of the
funnel shift. However, that transform is only legal if we know
that the shift count (modulo bitwidth) isn't zero.
Basically, since fshr(-1,0,0)==0 and fshl(-1,0,0)==-1 then doing a
rewrite such as fshr(X,Y,Z) => fshl(X,Y,0-Z) would be incorrect if
Z modulo bitwidth, could be zero.
```
$ ./alive-tv /tmp/test.ll
----------------------------------------
define i32 @src(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = fshl i32 %x, i32 %y, i32 %z
ret i32 %t0
}
=>
define i32 @tgt(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = sub i32 32, %z
%t1 = fshr i32 %x, i32 %y, i32 %t0
ret i32 %t1
}
Transformation doesn't verify!
ERROR: Value mismatch
Example:
i32 %x = #x00000000 (0)
i32 %y = #x00000400 (1024)
i32 %z = #x00000000 (0)
Source:
i32 %t0 = #x00000000 (0)
Target:
i32 %t0 = #x00000020 (32)
i32 %t1 = #x00000400 (1024)
Source value: #x00000000 (0)
Target value: #x00000400 (1024)
```
It could be possible to add back the transform, given that logic
is added to check that (Z % BW) can't be zero. Since there were
no test cases proving that such a transform actually would be useful
I decided to simply remove the faulty code in this patch.
Reviewed By: foad, lebedev.ri
Differential Revision: https://reviews.llvm.org/D86430
D70867 introduced support for expanding most ppc_fp128 operations. But
sitofp/uitofp is missing. This patch adds that after D81669.
Reviewed By: uweigand
Differntial Revision: https://reviews.llvm.org/D81918
The pattern matching does not account for truncating stores,
so it is unlikely to work at later stages. So we are likely
wasting compile-time with no hope of improvement by running
this later.
This should be NFC in terms of output because the endian
check further down would bail out too, but we are wasting
time by waiting to that point to give up. If we generalize
that function to deal with more than i8 types, we should
not have to deal with the degenerate case.
In SelectionDAGBuilder always translate the fshl and fshr intrinsics to
FSHL and FSHR (or ROTL and ROTR) instead of lowering them to shifts and
ORs. Improve the legalization of FSHL and FSHR to avoid code quality
regressions.
Differential Revision: https://reviews.llvm.org/D77152
In DAGTypeLegalizer::GenWidenVectorLoads the algorithm assumes it only
ever deals with fixed width types, hence the offsets for each individual
store never take 'vscale' into account. I've changed the code in that
function to use TypeSize instead of unsigned for tracking the remaining
load amount. In addition, I've changed the load loop to use the new
IncrementPointer helper function for updating the addresses in each
iteration, since this handles scalable vector types.
Also, I've added report_fatal_errors in GenWidenVectorExtLoads,
TargetLowering::scalarizeVectorLoad and TargetLowering::scalarizeVectorStores,
since these functions currently use a sequence of element-by-element
scalar loads/stores. In a similar vein, I've also added a fatal error
report in FindMemType for the case when we decide to return the element
type for a scalable vector type.
I've added new tests in
CodeGen/AArch64/sve-split-load.ll
CodeGen/AArch64/sve-ld-addressing-mode-reg-imm.ll
for the changes in GenWidenVectorLoads.
Differential Revision: https://reviews.llvm.org/D85909
The "isa" checks were less constrained because they allow
target constants, but the later matching code would bail
out on those anyway, so this should be slightly more
efficient.
This patch changes SplitVecOp_EXTRACT_VECTOR_ELT to work correctly
for scalable vectors and also fixes an a bug in DAGCombiner where
the scalable property is dropped in visitTRUNCATE when attempting
to fold an extract + a truncate.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85754
In DAGTypeLegalizer::GenWidenVectorStores the algorithm assumes it only
ever deals with fixed width types, hence the offsets for each individual
store never take 'vscale' into account. I've changed the main loop in
that function to use TypeSize instead of unsigned for tracking the
remaining store amount and offset increment. In addition, I've changed
the loop to use the new IncrementPointer helper function for updating
the addresses in each iteration, since this handles scalable vector
types.
Whilst fixing this function I also fixed a minor issue in
IncrementPointer whereby we were not adding the no-unsigned-wrap flag
for the add instruction in the same way as the fixed width case does.
Also, I've added a report_fatal_error in GenWidenVectorTruncStores,
since this code currently uses a sequence of element-by-element scalar
stores.
I've added new tests in
CodeGen/AArch64/sve-intrinsics-stores.ll
CodeGen/AArch64/sve-st1-addressing-mode-reg-imm.ll
for the changes in GenWidenVectorStores.
Differential Revision: https://reviews.llvm.org/D84937
In narrowExtractedVectorLoad there is an optimisation that tries to
combine extract_subvector with a narrowing vector load. At the moment
this produces warnings due to the incorrect calls to
getVectorNumElements() for scalable vector types. I've got this
working for scalable vectors too when the extract subvector index
is a multiple of the minimum number of elements. I have added a
new variant of the function:
MachineFunction::getMachineMemOperand
that copies an existing MachineMemOperand, but replaces the pointer
info with a null version since we cannot currently represent scaled
offsets.
I've added a new test for this particular case in:
CodeGen/AArch64/sve-extract-subvector.ll
Differential Revision: https://reviews.llvm.org/D83950
In this patch I have fixed two issues:
1. Our SVE tuple get/set intrinsics were using the wrong constant type
for the index passed to EXTRACT_SUBVECTOR. I have fixed this by using the
function SelectionDAG::getVectorIdxConstant to create the value. Also, I
have updated the documentation for EXTRACT_SUBVECTOR describing what type
the constant index should be and we now enforce this when creating the
node.
2. The AArch64 backend was missing the appropriate patterns for
extracting certain subvectors (nxv4f16 and nxv2f32) from legal SVE types.
I have added them as part of this patch.
The only way that I could find to test the new patterns was to use the
SVE tuple get intrinsics, although I realise it looks a bit unusual.
Tests added here:
test/CodeGen/AArch64/sve-extract-subvector.ll
Differential Revision: https://reviews.llvm.org/D85516
When the result type of insertelement needs to be split,
SplitVecRes_INSERT_VECTOR_ELT will try to store the vector to a
stack temporary, store the element at the location of the stack
temporary plus the index, and reload the Lo/Hi parts.
This patch does the following to ensure this works for scalable vectors:
- Sets the StackID with getStackIDForScalableVectors() in CreateStackTemporary
- Adds an IsScalable flag to getMemBasePlusOffset() and scales the
offset by VScale when this is true
- Ensures the immediate is clamped correctly by clampDynamicVectorIndex
so that we don't try to use an out of range index
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D84874
Changes the Offset arguments to both functions from int64_t to TypeSize
& updates all uses of the functions to create the offset using TypeSize::Fixed()
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85220
These aren't the canonical forms we'd get from InstCombine, but
we do have X86 tests for them. Recognizing them is pretty cheap.
While there make use of APInt:isSignedMinValue/isSignedMaxValue
instead of creating a new APInt to compare with. Also use
SelectionDAG::getAllOnesConstant helper to hide the all ones
APInt creation.
Follow-up to D82716 / rGea71ba11ab11
We do not have the fabs removal fold in IR yet for the case
where the sqrt operand is repeated, so that's another potential
improvement.
As mentioned on D85463, we should be using SimplifyMultipleUseDemandedBits (which is the default fallback).
The minor regression in illegal-bitfield-loadstore.ll will be addressed properly by D77804.
One of the callers only wants the condition, but the vselect can
be simplified by getNode making it hard or impossible to retrieve
the condition.
Instead, return the condition and make the other 2 callers
responsible for creating the vselect node using the condition.
Rename the function to WidenVSELECTMask accordingly.
Differential Revision: https://reviews.llvm.org/D85468
This allows us to remove extra patterns from AArch64SVEInstrInfo.td
because we can reuse those required for fixed length vectors.
Differential Revision: https://reviews.llvm.org/D85328
We currently don't do anything to fold any_extend vector loads as no target has such an instruction.
Instead I've added support for folding to a zextload, SimplifyDemandedBits does a good job of adjusting the zext(truncate(()) stages as required later on.
We still need the custom scalar extload handling instead of using the tryToFoldExtOfLoad helper as it has different legality tests - we can probably tweak that to reduce most of the code duplication.
Fixes the regression I mentioned in rG99a971cadff7
Differential Revision: https://reviews.llvm.org/D85129
This corresponds with the SelectionDAGISel change in D84056.
Also, rename some poorly named tests in CodeGen/X86/fast-isel-fneg.ll with NFC.
Differential Revision: https://reviews.llvm.org/D85149
The custom lowering saves an instruction over the generic expansion, by
taking advantage of the fact that PowerPC shift instructions are well
defined in the shift-by-bitwidth case.
Differential Revision: https://reviews.llvm.org/D83948
This patch stops unconditionally transforming FSUB(-0,X) into an FNEG(X) while building the DAG. There is also one small change to handle the new FSUB(-0,X) similarly to FNEG(X) in the AMDGPU backend.
Differential Revision: https://reviews.llvm.org/D84056
Try to be more consistent with the SDLoc param in the TargetLowering methods.
This also exposes an issue where we were passing a SDNode as a SDLoc, relying on the implicit SDLoc(SDNode) constructor.
Just the obvious implementation that rewrites the result type. Also fix
warning from EXTRACT_SUBVECTOR legalization that triggers on the test.
Differential Revision: https://reviews.llvm.org/D84706
This fixes an assertion failure that was being triggered in
SelectionDAG::getZeroExtendInReg(), where it was trying to extend the <2xi32>
to i64 (which should have been <2xi64>).
Fixes: rdar://66016901
Differential Revision: https://reviews.llvm.org/D84884
This change is mechanical, it just removes the restriction and updates tests. The key building blocks were submitted in 31342eb and 8fe2abc.
Note that this (and preceeding changes) entirely subsumes D83965. I did includes a couple of it's tests.
From the codegen changes, an interesting observation: this doesn't actual reduce spilling, it just let's the register allocator do it's job. That results in a slightly different overall result which has both pros and cons over the eager spill lowering. (i.e. We'll have some perf tuning to do once this is stable.)
Change the way we track how a particular pointer was relocated at a statepoint in selection dag. Previously, we used an optional<location> for the spill lowering, and a block local Register for the newly introduced vreg lowering. Combine all three lowerings (norelocate, spill, and vreg) into a single helper class, and keep a single copy of the information.
This is submitted separately as it really does make the code more readible on it's own, but the indirect motivation is to move vreg tracking from StatepointLowering to FunctionLoweringInfo. This is the last piece needed to support cross block relocations with vregs; that will follow in a separate (non-NFC) patch.
This builds on 3da1a96 on the path towards supporting invokes and cross block relocations. The actual change attempts to be NFC, but does fail in one corner-case explained below.
The change itself is fairly mechanical. Rather than remember SDValues - which are inherently block local - immediately produce a virtual register copy and remember that.
Once this lands, we'll update the FunctionLoweringInfo::StatepointSpillMap map to allow register based lowerings, delete VirtRegs from StatepointLowering, and drop the restriction against cross block relocations. I deliberately separate the semantic part into it's own change for easy of understanding and fault isolation.
The corner-case which isn't quite NFC is that the old implementation implicitly CSEd gc.relocates of the same SDValue regardless of type. The new implementation still only relocates once, but it produces distinct vregs for the bitcast and it's source, whereas SelectionDAG's generic CSE was able to remove the bitcast in the old implementation. Note that the final assembly doesn't change (at least in the test), as our MI level optimizations catch the duplication.
I assert that this is an uninteresting corner-case. It's functionally correct, and if we find a case where this influences performance, we should really be canonicalizing types to i8* at the IR level.
Differential Revision: https://reviews.llvm.org/D84692
I have added tests to:
CodeGen/AArch64/sve-intrinsics-int-arith.ll
for doing simple integer add operations on tuple types. Since these
tests introduced new warnings due to incorrect use of
getVectorNumElements() I have also fixed up these warnings in the
same patch. These fixes are:
1. In narrowExtractedVectorBinOp I have changed the code to bail out
early for scalable vector types, since we've not yet hit a case that
proves the optimisations are profitable for scalable vectors.
2. In DAGTypeLegalizer::WidenVecRes_CONCAT_VECTORS I have replaced
calls to getVectorNumElements with getVectorMinNumElements in cases
that work with scalable vectors. For the other cases I have added
asserts that the vector is not scalable because we should not be
using shuffle vectors and build vectors in such cases.
Differential revision: https://reviews.llvm.org/D84016
In DAGTypeLegalizer::SplitVecOp_EXTRACT_SUBVECTOR I have replaced
calls to getVectorNumElements with getVectorMinNumElements, since
this code path works for both fixed and scalable vector types. For
scalable vectors the index will be multiplied by VSCALE.
Fixes warnings in this test:
sve-sext-zext.ll
Differential revision: https://reviews.llvm.org/D83198
Summary:
In parallelizeChainedStores, a TokenFactor was created with the size greater than 3000.
We found that DAGCombiner::visitTokenFactor will consume a huge amount of time on
such nodes. Since the number of operands already exceeds TokenFactorInlineLimit, we propose
to give up simplification with the consideration of compile time.
Reviewers:
@spatel, @arsenm
Differential Revision:
https://reviews.llvm.org/D84204
(Disabled under flag for the moment)
This is part of a larger project wherein we are finally integrating lowering of gc live operands with the register allocator. Today, we force spill all operands in SelectionDAG. The code to do so is distinctly non-optimal. The approach this patch is working towards is to instead lower the relocations directly into the MI form, and let the register allocator pick which ones get spilled and which stack slots they get spilled to. In terms of performance, the later part is actually more important as it avoids redundant shuffling of values between stack slots.
This particular change adds ISEL support to produce the variadic def STATEPOINT form required by the above. In particular, the first N are lowered to variadic tied def/use pairs. So new statepoint looks like this:
reloc1,reloc2,... = STATEPOINT ..., base1, derived1<tied-def0>, base2, derived2<tied-def1>, ...
N is limited by the maximal number of tied registers machine instruction can have (15 at the moment).
The current patch is restricted to handling relocations within a single basic block. Cross block relocations (e.g. invokes) are handled via the legacy mechanism. This restriction will be relaxed in future patches.
Patch By: dantrushin
Differential Revision: https://reviews.llvm.org/D81648
In the included test case the align 16 allowed the v23f32 load to handled as load v16f32, load v4f32, and load v4f32(one element not used). These loads all need to be concatenated together into a final vector. In this case we tried to concatenate the two v4f32 loads to match the type of the v16f32 load so we could do a second concat_vectors, but those loads alone only add up to v8f32. So we need to two v4f32 undefs to pad it.
It appears we've tried to hack around a similar issue in this code before by adding undef padding to loads in one of the earlier loops in this function. Originally in r147964 by padding all loads narrower than previous loads to the same size. Later modifed to only the last load in r293088. This patch removes that earlier code and just handles it on demand where we know we need it.
Fixes PR46820
Differential Revision: https://reviews.llvm.org/D84463
This adds the llvm.abs(), llvm.umin(), llvm.umax(), llvm.smin(),
and llvm.smax() intrinsics specified in D81829. For SelectionDAG,
the ISD opcodes and all the legalization and lowering already exist,
so this just wires them up to the intrinsic in the SDAG builder and
adds rudimentary tests. For GlobalISel only the min/max intrinsics
are wired up, as llvm.abs() will require the addition of a G_ABS op,
and corresponding legalization support.
Differential Revision: https://reviews.llvm.org/D84125
On systems where size() doesn't return unsigned long, this leads to an
overloading mismatch. Convert the constant to whatever type is used for
Q.size() on the system.
Currently popFromQueueImpl iterates over all candidates to find the best
one. While the candidate queue is small, this is not a problem. But it
becomes a problem once the queue gets larger. For example, the snippet
below takes 330s to compile with llc -O0, but completes in 3s with this
patch.
define void @test(i4000000* %ptr) {
entry:
store i4000000 0, i4000000* %ptr, align 4
ret void
}
This patch limits the number of candidates to check to 1000. This limit
ensures that it never triggers for test-suite/SPEC2000/SPEC2006 on X86
and AArch64 with -O3, while still drastically limiting the compile-time
in case of very large queues.
It would be even better to use a binary heap to manage to queue
(D83335), but some heuristics change the score of a node in the queue
after another node has been scheduled. I plan to address this for
backends that use the MachineScheduler in the future, but that requires
a more careful evaluation. In the meantime, the limit should help users
impacted by this issue.
The patch includes a slightly smaller version of the motivating example
as test case, to guard against the issue.
Reviewers: efriedma, paquette, niravd
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84328
The AMDGPU handling of f16 vectors is terrible still since it gets
scalarized even when the vector operation is legal.
The code is is essentially duplicated between the non-strict and
strict case. Apparently no other expansions are currently trying to do
this. This is mostly because I found the behavior of
getStrictFPOperationAction to be confusing. In the ARM case, it would
expand strict_fsub even though it shouldn't due to the later check. At
that point, the logic required to check for legality was more complex
than just duplicating the 2 instruction expansion.
This isn't a natively supported operation, so convert it to a
mask+compare.
In addition to the operation itself, fix up some surrounding stuff to
make the testcase work: we need concat_vectors on i1 vectors, we need
legalization of i1 vector truncates, and we need to fix up all the
relevant uses of getVectorNumElements().
Differential Revision: https://reviews.llvm.org/D83811
MBBs are not allowed to have non-terminator instructions after the first
terminator. Currently in some cases (see the modified test),
EmitSchedule can add DBG_VALUEs after the last terminator, for example
when referring a debug value that gets folded into a TCRETURN
instruction on ARM.
This patch updates EmitSchedule to move inserted DBG_VALUEs just before
the first terminator. I am not sure if there are terminators produce
values that can in turn be used by a DBG_VALUE. In that case, moving the
DBG_VALUE might result in referencing an undefined register. But in any
case, it seems like currently there is no way to insert a proper DBG_VALUEs
for such registers anyways.
Alternatively it might make sense to just remove those extra DBG_VALUES.
I am not too familiar with the details of debug info in the backend and
would appreciate any suggestions on how to address the issue in the best
possible way.
Reviewers: vsk, aprantl, jpaquette, efriedma, paquette
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83561
In an upcoming AMDGPU patch, the scalar cases will be legal and vector
ops should be scalarized, rather than producing a long sequence of
vector ops which will also need to be scalarized.
Use a lazy heuristic that seems to work and improves the thumb2 MVE
test.
When the byref attribute is added, there will need to be two similar
functions for the existing cases which have an associate value copy,
and byref which does not. Most, but not all of the existing uses will
use the existing version.
The associated size function added by D82679 also needs to
contextually differ, and will help eliminate a few places still
relying on pointee element types.
Summary:
This patch modifies IncrementMemoryAddress to use a vscale
when calculating the new address if the data type is scalable.
Also adds tablegen patterns which match an extract_subvector
of a legal predicate type with zip1/zip2 instructions
Reviewers: sdesmalen, efriedma, david-arm
Reviewed By: efriedma, david-arm
Subscribers: tschuett, hiraditya, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83137
The operands of a BUILD_VECTOR must all have the same type, so we can hoist this invariant condition out of the loop.
Differential Revision: https://reviews.llvm.org/D83882
Some of the system registers readable on AArch64 and ARM platforms
return different values with each read (for example a timer counter),
these shouldn't be hoisted outside loops or otherwise interfered with,
but the normal @llvm.read_register intrinsic is only considered to read
memory.
This introduces a separate @llvm.read_volatile_register intrinsic and
maps all system-registers on ARM platforms to use it for the
__builtin_arm_rsr calls. Registers declared with asm("r9") or similar
are unaffected.
The existing code already considered this case. Unfortunately a typo in
the condition prevents it from triggering. Also the existing code, had
it run, forgot to do the folding.
This fixes PR42876.
Differential Revision: https://reviews.llvm.org/D65802
ComputeNumSignBits and computeKnownBits both trigger "Scalable flag
may be dropped" warnings when a fixed length vector is extracted
from a scalable vector. This patch assumes nothing about the
demanded elements thus matching the behaviour when extracting a
scalable vector from a scalable vector.
Differential Revision: https://reviews.llvm.org/D83642
In DAGCombiner::TransformFPLoadStorePair we were dropping the scalable
property of TypeSize when trying to create an integer type of equivalent
size. In fact, this optimisation makes no sense for scalable types
since we don't know the size at compile time. I have changed the code
to bail out when encountering scalable type sizes.
I've added a test to
llvm/test/CodeGen/AArch64/sve-fp.ll
that exercises this code path. The test already emits an error if it
encounters warnings due to implicit TypeSize->uint64_t conversions.
Differential Revision: https://reviews.llvm.org/D83572
We have this generic transform in IR (instcombine),
but as shown in PR41098:
http://bugs.llvm.org/PR41098
...the pattern may emerge in codegen too.
x86 has a potential refinement/reversal opportunity here,
but that should come later or needs a target hook to
avoid the transform. Converting to bswap is the more
specific form, so we should use it if it is available.
This carves out an exception for a pair of consecutive loads that are
reversed from the consecutive order of a pair of stores. All of the
existing profitability/legality checks for the memops remain between
the 2 altered hunks of code.
This should give us the same x86 base-case asm that gcc gets in
PR41098 and PR44895:
http://bugs.llvm.org/PR41098http://bugs.llvm.org/PR44895
I think we are missing a potential subsequent conversion to use "movbe"
if the target supports that. That might be similar to what AArch64
would use to get "rev16".
Differential Revision: https://reviews.llvm.org/D83567
This carves out an exception for a pair of consecutive loads that are
reversed from the consecutive order of a pair of stores. All of the
existing profitability/legality checks for the memops remain between
the 2 altered hunks of code.
This should give us the same x86 base-case asm that gcc gets in
PR41098 and PR44895:i
http://bugs.llvm.org/PR41098http://bugs.llvm.org/PR44895
I think we are missing a potential subsequent conversion to use "movbe"
if the target supports that. That might be similar to what AArch64
would use to get "rev16".
Differential Revision:
Summary:
Helper used when splitting load & store operations to calculate
the pointer + offset for the high half of the split
Reviewers: efriedma, sdesmalen, david-arm
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83577
fadd (fma A, B, (fmul C, D)), E --> fma A, B, (fma C, D, E)
This is only allowed when "reassoc" is present on the fadd.
As discussed in D80801, this transform goes beyond
what is allowed by "contract" FMF (-ffp-contract=fast).
That is because we are fusing the trailing add of 'E' with a
multiply, but without "reassoc", the code mandates that the
products A*B and C*D are added together before adding in 'E'.
I've added this example to the LangRef to try to clarify the
meaning of "contract". If that seems reasonable, we should
probably do something similar for the clang docs because
there does not appear to be any formal spec for the behavior
of -ffp-contract=fast.
Differential Revision: https://reviews.llvm.org/D82499
In DAGTypeLegalizer::SetSplitVector I have changed calls in the assert
from getVectorNumElements() to getVectorElementCount(), since this
code path works for both fixed and scalable vectors.
This fixes up one warning in the test:
sve-sext-zext.ll
Differential Revision: https://reviews.llvm.org/D83196
This patch replaces some invalid calls to getVectorNumElements() with calls
to getVectorMinNumElements() instead, since the code paths changed in this
patch work for both fixed and scalable vector types.
Fixes warnings in this test:
sve-sext-zext.ll
Differential Revision: https://reviews.llvm.org/D83203
Summary:
When legalizing a biscast operation from an fp16 operand to an i16 on a
target that requires both input and output types to be promoted to
32-bits, an assertion can fail when building the new node due to a
mismatch between the the operation's result size and the type specified to
the node.
This patches fix the issue by making sure the bit width of the types
match for the FP_TO_FP16 node, covering the difference with an extra
ANYEXTEND operation.
Reviewers: ostannard, efriedma, pirama, jmolloy, plotfi
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82552
David Sherwood