The function importer was still materializing metadata when modules were
loaded for function importing. We only want to materialize it when we
are going to invoke the metadata linking postpass. Materializing it
before function importing is not only unnecessary, but also causes
metadata referenced by imported functions to be mapped in early, and
then not connected to the rest of the module level metadata when it is
ultimately linked in.
Augmented the test case to specifically check for the metadata being
properly connected, which it wasn't before this fix.
llvm-svn: 257171
In setInsertionPoint if the value is not a PHI, Instruction or
Argument it should be a Constant, not a ConstantExpr.
Original commit message:
[InstCombine] Look through PHIs, GEPs, IntToPtrs and PtrToInts to expose more constants when comparing GEPs
Summary:
When comparing two GEP instructions which have the same base pointer
and one of them has a constant index, it is possible to only compare
indices, transforming it to a compare with a constant. This removes
one use for the GEP instruction with the constant index, can reduce
register pressure and can sometimes lead to removing the comparisson
entirely.
InstCombine was already doing this when comparing two GEPs if the base
pointers were the same. However, in the case where we have complex
pointer arithmetic (GEPs applied to GEPs, PHIs of GEPs, conversions to
or from integers, etc) the value of the original base pointer will be
hidden to the optimizer and this transformation will be disabled.
This change detects when the two sides of the comparison can be
expressed as GEPs with the same base pointer, even if they don't
appear as such in the IR. The transformation will convert all the
pointer arithmetic to arithmetic done on indices and all the relevant
uses of GEPs to GEPs with a common base pointer. The GEP comparison
will be converted to a comparison done on indices.
Reviewers: majnemer, jmolloy
Subscribers: hfinkel, jevinskie, jmolloy, aadg, llvm-commits
Differential Revision: http://reviews.llvm.org/D15146
llvm-svn: 257164
a top-down manner into a true top-down or RPO pass over the call graph.
There are specific patterns of function attributes, notably the
norecurse attribute, which are most effectively propagated top-down
because all they us caller information.
Walk in RPO over the call graph SCCs takes the form of a module pass run
immediately after the CGSCC pass managers postorder walk of the SCCs,
trying again to deduce norerucrse for each singular SCC in the call
graph.
This removes a very legacy pass manager specific trick of using a lazy
revisit list traversed during finalization of the CGSCC pass. There is
no analogous finalization step in the new pass manager, and a lazy
revisit list is just trying to produce an RPO iteration of the call
graph. We can do that more directly if more expensively. It seems
unlikely that this will be the expensive part of any compilation though
as we never examine the function bodies here. Even in an LTO run over
a very large module, this should be a reasonable fast set of operations
over a reasonably small working set -- the function call graph itself.
In the future, if this really is a compile time performance issue, we
can look at building support for both post order and RPO traversals
directly into a pass manager that builds and maintains the PO list of
SCCs.
Differential Revision: http://reviews.llvm.org/D15785
llvm-svn: 257163
This remove the need for locking when deleting a function.
Differential Revision: http://reviews.llvm.org/D15988
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 257139
Limit this transform to a basic block and guard against PHIs.
Hopefully, this fixes the remaining failures in PR25999:
https://llvm.org/bugs/show_bug.cgi?id=25999
llvm-svn: 257133
We marked values which are 'undef' as constant instead of undefined
which violates SCCP's invariants. If we can figure out that a
computation results in 'undef', leave it in the undefined state.
This fixes PR16052.
llvm-svn: 257102
Coverage mapping data may reference names of functions
that are skipped by FE (e.g, unused inline functions). Since
those functions are skipped, normal instr-prof function lowering
pass won't put those names in the right section, so special
handling is needed to walk through coverage mapping structure
and recollect the references.
With this patch, only names that are skipped are processed. This
simplifies the lowering code and it no longer needs to make
assumptions coverage mapping data layout. It should also be
more efficient.
llvm-svn: 257091
The fix for PR23999 made us mark loads of null as producing the constant
undef which upsets the lattice. Instead, keep the load as "undefined".
This fixes PR26044.
llvm-svn: 257087
Summary:
When comparing two GEP instructions which have the same base pointer
and one of them has a constant index, it is possible to only compare
indices, transforming it to a compare with a constant. This removes
one use for the GEP instruction with the constant index, can reduce
register pressure and can sometimes lead to removing the comparisson
entirely.
InstCombine was already doing this when comparing two GEPs if the
base pointers were the same. However, in the case where we have
complex pointer arithmetic (GEPs applied to GEPs, PHIs of GEPs,
conversions to or from integers, etc) the value of the original
base pointer will be hidden to the optimizer and this transformation
will be disabled.
This change detects when the two sides of the comparison can be
expressed as GEPs with the same base pointer, even if they don't
appear as such in the IR. The transformation will convert all the
pointer arithmetic to arithmetic done on indices and all the
relevant uses of GEPs to GEPs with a common base pointer. The
GEP comparison will be converted to a comparison done on indices.
Reviewers: majnemer, jmolloy
Subscribers: hfinkel, jevinskie, jmolloy, aadg, llvm-commits
Differential Revision: http://reviews.llvm.org/D15146
llvm-svn: 257064
At the moment, this is essentially a diangostic option so that I can start collecting failing test cases, but we will eventually migrate to removing the vector splitting code entirely.
llvm-svn: 257015
Summary: This patch adds a check in SplitLandingPadPredecessors to see if the original landingpad instruction has any uses. If not, we don't need to create a PHINode for it in the joint block since it's gonna be a dead code anyway. The motivation for this patch is that we found a bug that SplitLandingPadPredecessors created a PHINode of token type landingpad, which failed the verifier since PHINode can not be token type. However, the created PHINode will never be used in our code pattern. This patch will workaround this bug, and we might add supports in SplitLandingPadPredecessors to handle token type landingpad with uses in the future.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15835
llvm-svn: 256972
Summary: As per title. This will allow the optimizer to pick up on it.
Reviewers: craig.topper, spatel, dexonsmith, Prazek, chandlerc, joker.eph, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15923
llvm-svn: 256969
Summary: The example in desc should match with actual option name
Reviewers: jmolloy
Differential Revision: http://reviews.llvm.org/D15800
llvm-svn: 256951
This patch prevents us from unintentionally creating entries in the reductions
map for PHIs that are not actually reductions. This is currently not an issue
since we bail out if we encounter PHIs other than inductions or reductions.
However the behavior could become problematic as we add support for additional
recurrence types.
llvm-svn: 256930
Summary: It turns out that if we don't try to do it at the store location, we can do it before any operation that alias the load, as long as no operation alias the store.
Reviewers: craig.topper, spatel, dexonsmith, Prazek, chandlerc, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15903
llvm-svn: 256923
If we replace one call-site with another, be sure to move over any
operand bundles that lingered on the old call-site.
This fixes PR26036.
llvm-svn: 256912
Most of the properties of memset_pattern16 can be now covered by the generic attributes and inferred by InferFunctionAttrs. The only exceptions are:
- We don't yet have a writeonly attribute for the first argument.
- We don't have an attribute for modeling the access size facts encoded in MemoryLocation.cpp.
Differential Revision: http://reviews.llvm.org/D15879
llvm-svn: 256911
Summary:
Most of the tool chain is able to optimize scalar and memcpy like operation effisciently while it isn't that good with aggregates. In order to improve the support of aggregate, we try to change aggregate manipulation into either scalar or memcpy like ones whenever possible without loosing informations.
This is one such opportunity.
Reviewers: craig.topper, spatel, dexonsmith, Prazek, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15894
llvm-svn: 256868
In r256814, we managed to remove catchpads which were trivially redudant
because they were the same SSA value. We can do better using the same
algorithm but with a smarter datastructure by hashing the SSA values
within the catchpad and comparing them structurally.
llvm-svn: 256815
Summary:
Previously there were three conditionals, checking for global
variables, undef values and everything constant except these two, all three
returning the same value. This commit replaces them by one conditional.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15818
llvm-svn: 256812
Summary:
This commit renames GCRelocateOperands to GCRelocateInst and makes it an
intrinsic wrapper, similar to e.g. MemCpyInst. Also, all users of
GCRelocateOperands were changed to use the new intrinsic wrapper instead.
Reviewers: sanjoy, reames
Subscribers: reames, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D15762
llvm-svn: 256811
Summary:
At least for CoreCLR, a catchpad which immediately executes an
`unreachable` instruction indicates that the exception can never have a
matching type, and so such catchpads can be removed, and so can their
catchswitches if the catchswitch becomes empty.
Reviewers: rnk, andrew.w.kaylor, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15846
llvm-svn: 256809
Summary: This patch fixes a bug in prepareICWorklistFromFunction, where the loop becomes infinite with instructions of token type. The patch checks if the instruction is token type, and if so it updates EndInst with the current instruction.
Reviewers: reames, majnemer
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D15859
llvm-svn: 256792
Update some comments to be more explicit.
Change bypassSlowDivision and the functions it calls so that they take
BasicBlock*s and Instruction*s, rather than Function::iterator&s and
BasicBlock::iterator&s.
Change the APIs so that the caller is responsible for updating the
iterator, rather than the callee. This makes control flow much easier
to follow.
Patch by Justin Lebar!
llvm-svn: 256789
r256763 had promoteLoopAccessesToScalars check for the existence of a
catchswitch when the exit blocks were populated but
promoteLoopAccessesToScalars may be called with a prepopulated set of
exit blocks which would also need to be checked.
This fixes PR26019.
llvm-svn: 256788
This patch removes the isOperatorNewLike predicate since it was only being used to establish a non-null return value and we have attributes specifically for that purpose with generic handling. To keep approximate the same behaviour for existing frontends, I added the various operator new like (i.e. instances of operator new) to InferFunctionAttrs. It's not really clear to me why this isn't handled in Clang, but I didn't want to break existing code and any subtle assumptions it might have.
Once this patch is in, I'm going to start separating the isAllocLike family of predicates. These appear to be being used for a mixture of things which should be more clearly separated and documented. Today, they're being used to indicate (at least) aliasing facts, CSE-ability, and default values from an allocation site.
Differential Revision: http://reviews.llvm.org/D15820
llvm-svn: 256787
This is a resubmission of r256336 which was reverted in r256361. The issue was the lack of the invariant check of the memset value in processLooMemSet().
The original message:
Move several checks into isLegalStores. Also, delineate between those stores that are memset-able and those that are memcpy-able.
llvm-svn: 256783
Before reevaluating instructions, iterate over all instructions
to be reevaluated and remove trivially dead instructions and if
any of it's operands become trivially dead, mark it for deletion
until all trivially dead instructions have been removed
llvm-svn: 256773
We had two bugs here:
- We might try to sink into a catchswitch, causing verifier failures.
- We will succeed in sinking into a cleanuppad but we didn't update the
funclet operand bundle.
This fixes PR26000.
llvm-svn: 256728
This is one last remaining instrumentatation related structure
that needs to be migrate to use the centralized template
definition. With this change, instrumentation code
related to coverage module header will be kept in sync
with the coverage mapping reader. The remaining code
which makes implicit assumption about covmap control
structure layout in the the lowering pass will cleaned
up in a different patch. This patch is not intended to
have no functional change.
llvm-svn: 256715
As suggested in review for r255909, rename MDMaterialized to AllowTemps,
and identify the name of the boolean flag being set in calls to
saveMetadataList.
llvm-svn: 256653
If running the PlaceSafepoints pass on a module which doesn't have the
gc.safepoint_poll function without disabling entry and backedge safepoints,
previously the pass crashed with an obscure error because of a null pointer.
Now it fails the assert instead.
llvm-svn: 256580
The code that was meant to adjust the duplication cost based on the
terminator opcode was not being executed in cases where the initial
threshold was hit inside the loop.
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D15536
llvm-svn: 256568
InlineCostAnalysis is an analysis pass without any need for it to be one.
Once it stops being an analysis pass, it doesn't maintain any useful state
and the member functions inside can be made free functions. NFC.
Differential Revision: http://reviews.llvm.org/D15701
llvm-svn: 256521
Summary:
Previously, only the outer (last) bitcast was rematerialized, resulting in a
use of the unrelocated inner (first) bitcast after the statepoint. See the
test case for an example.
Reviewers: igor-laevsky, reames
Subscribers: reames, alex, llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D15789
llvm-svn: 256520
a standalone pass.
There is no call graph or even interesting analysis for this part of
function attributes -- it is literally inferring attributes based on the
target library identification. As such, we can do it using a much
simpler module pass that just walks the declarations. This can also
happen much earlier in the pass pipeline which has benefits for any
number of other passes.
In the process, I've cleaned up one particular aspect of the logic which
was necessary in order to separate the two passes cleanly. It now counts
inferred attributes independently rather than just counting all the
inferred attributes as one, and the counts are more clearly explained.
The two test cases we had for this code path are both ... woefully
inadequate and copies of each other. I've kept the superset test and
updated it. We need more testing here, but I had to pick somewhere to
stop fixing everything broken I saw here.
Differential Revision: http://reviews.llvm.org/D15676
llvm-svn: 256466
is (by default) run much earlier than FuncitonAttrs proper.
This allows forcing optnone or other widely impactful attributes. It is
also a bit simpler as the force attribute behavior needs no specific
iteration order.
I've added the pass into the default module pass pipeline and LTO pass
pipeline which mirrors where function attrs itself was being run.
Differential Revision: http://reviews.llvm.org/D15668
llvm-svn: 256465
Summary: This patch changes gc.statepoint intrinsic's return type to token type instead of i32 type. Using token types could prevent LLVM to merge different gc.statepoint nodes into PHI nodes and cause further problems with gc relocations. The patch also changes the way on how gc.relocate and gc.result look for their corresponding gc.statepoint on unwind path. The current implementation uses the selector value extracted from a { i8*, i32 } landingpad as a hook to find the gc.statepoint, while the patch directly uses a token type landingpad (http://reviews.llvm.org/D15405) to find the gc.statepoint.
Reviewers: sanjoy, JosephTremoulet, pgavlin, igor-laevsky, mjacob
Subscribers: reames, mjacob, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D15662
llvm-svn: 256443
This is an extension of the shuffle combining from r203229:
http://reviews.llvm.org/rL203229
The idea is to widen a short input vector with undef elements so the
existing shuffle transform for extract/insert can kick in.
The motivation is to finally solve PR2109:
https://llvm.org/bugs/show_bug.cgi?id=2109
For that example, the IR becomes:
%1 = bitcast <2 x i32>* %P to <2 x float>*
%ld1 = load <2 x float>, <2 x float>* %1, align 8
%2 = shufflevector <2 x float> %ld1, <2 x float> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
%i2 = shufflevector <4 x float> %A, <4 x float> %2, <4 x i32> <i32 0, i32 1, i32 4, i32 5>
ret <4 x float> %i2
And x86 SSE output improves from:
movq (%rdi), %xmm1 ## xmm1 = mem[0],zero
movdqa %xmm1, %xmm2
shufps $229, %xmm2, %xmm2 ## xmm2 = xmm2[1,1,2,3]
shufps $48, %xmm0, %xmm1 ## xmm1 = xmm1[0,0],xmm0[3,0]
shufps $132, %xmm1, %xmm0 ## xmm0 = xmm0[0,1],xmm1[0,2]
shufps $32, %xmm0, %xmm2 ## xmm2 = xmm2[0,0],xmm0[2,0]
shufps $36, %xmm2, %xmm0 ## xmm0 = xmm0[0,1],xmm2[2,0]
retq
To the almost optimal:
movhpd (%rdi), %xmm0
Note: There's a tension in the existing transform related to generating
arbitrary shufflevector masks. We avoid that in other places in InstCombine
because we're scared that codegen can't handle strange masks, but it looks
like we're ok with producing those here. I purposely chose weird insert/extract
indexes for the regression tests to see the effect in these cases.
For PowerPC+Altivec, AArch64, and X86+SSE/AVX, I think the codegen is equal or
better for these examples.
Differential Revision: http://reviews.llvm.org/D15096
llvm-svn: 256394
Move several checks into isLegalStores. Also, delineate between those stores
that are memset-able and those that are memcpy-able.
http://reviews.llvm.org/D15683
Patch by Haicheng Wu <haicheng@codeaurora.org>!
llvm-svn: 256336
Reasons:
1) The existing form was a form of false generality. None of the implemented GCStrategies use anything other than a type. Its becoming more and more clear we're going to need some type of strong GC pointer in the type system and we shouldn't pretend otherwise at this point.
2) The API was awkward when applied to vectors-of-pointers. The old one could have been made to work, but calling isGCManagedPointer(Ty->getScalarType()) is much cleaner than the Value alternatives.
3) The rewriting implementation effectively assumes the type based predicate as well. We should be consistent.
llvm-svn: 256312
Previously, "%" + name of the value was printed for each derived and base
pointer. This is correct for instructions, but wrong for e.g. globals.
llvm-svn: 256305
This reapplies r256277 with two changes:
- In emitFnAttrCompatCheck, change FuncName's type to std::string to fix
a use-after-free bug.
- Remove an unnecessary install-local target in lib/IR/Makefile.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 256304
This reapplies r252990 and r252949. I've added member function getKind
to the Attr classes which returns the enum or string of the attribute.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 256277
The code for deleting dead global variables and functions was
duplicated.
This is in preparation for also deleting dead global aliases.
llvm-svn: 256274
This patch removes all weight-related interfaces from BPI and replace
them by probability versions. With this patch, we won't use edge weight
anymore in either IR or MC passes. Edge probabilitiy is a better
representation in terms of CFG update and validation.
Differential revision: http://reviews.llvm.org/D15519
llvm-svn: 256263
Summary:
These were deprecated 11 months ago when a generic
llvm.experimental.gc.result intrinsic, which works for all types, was added.
Reviewers: sanjoy, reames
Subscribers: sanjoy, chenli, llvm-commits
Differential Revision: http://reviews.llvm.org/D15719
llvm-svn: 256262
Summary:
Previously, RS4GC crashed in CreateGCRelocates() because it assumed
that every base is also in the array of live variables, which isn't true if a
live variable has a constant base.
This change fixes the crash by making sure CreateGCRelocates() won't try to
relocate a live variable with a constant base. This would be unnecessary
anyway because anything with a constant base won't move.
Reviewers: reames
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D15556
llvm-svn: 256252
This uses the same criteria used in CFE's CodeGenPGO to identify hot and cold
callees and uses values of inlinehint-threshold and inlinecold-threshold
respectively as the thresholds for such callees.
Differential Revision: http://reviews.llvm.org/D15245
llvm-svn: 256222
This patch adds an option, -safe-stack-no-tls, for using normal
storage instead of thread-local storage for the unsafe stack pointer.
This can be useful when SafeStack is applied to an operating system
kernel.
http://reviews.llvm.org/D15673
Patch by Michael LeMay.
llvm-svn: 256221
The linker requires that a comdat section must be associated
with a another comdat section that precedes it. This
means the comdat section's name needs to use the profile name
var's name.
Patch tested by Johan Engelen.
llvm-svn: 256220
When targeting COFF, it is required that a comdat section to
have a global obj with the same name as the comdat (except for
comdats with select kind to be associative). This fix makes
sure that the comdat is keyed on the data variable for COFF.
Also improved test coverage for this.
llvm-svn: 256193
`CloneAndPruneIntoFromInst` sometimes RAUW's dead instructions with
`undef` before erasing them (to avoid deleting instructions that still
have uses). This changes the `WeakVH` in `OperandBundleCallSites` to
hold an `undef`, and we need to guard for this situation in eventuality
in `llvm::InlineFunction`.
llvm-svn: 256110
Make personality functions, prefix data, and prologue data hungoff
operands of Function.
This is based on the email thread "[RFC] Clean up the way we store
optional Function data" on llvm-dev.
Thanks to sanjoyd, majnemer, rnk, loladiro, and dexonsmith for feedback!
Includes a fix to scrub value subclass data in dropAllReferences. Does not
use binary literals.
Differential Revision: http://reviews.llvm.org/D13829
llvm-svn: 256095
Make personality functions, prefix data, and prologue data hungoff
operands of Function.
This is based on the email thread "[RFC] Clean up the way we store
optional Function data" on llvm-dev.
Thanks to sanjoyd, majnemer, rnk, loladiro, and dexonsmith for feedback!
Includes a fix to scrub value subclass data in dropAllReferences.
Differential Revision: http://reviews.llvm.org/D13829
llvm-svn: 256093
Make personality functions, prefix data, and prologue data hungoff
operands of Function.
This is based on the email thread "[RFC] Clean up the way we store
optional Function data" on llvm-dev.
Thanks to sanjoyd, majnemer, rnk, loladiro, and dexonsmith for feedback!
Differential Revision: http://reviews.llvm.org/D13829
llvm-svn: 256090
As shown by the included test case, it's reasonable to end up with constant references during base pointer calculation. The code actually handled this case just fine, we only had the assert to help isolate problems under the belief that constant references shouldn't be present in IR generated by managed frontends. This turned out to be wrong on two fronts: 1) Manual Jacobs is working on a language with constant references, and b) we found a case where the optimizer does create them in practice.
llvm-svn: 256079
Summary:
First up is instcombine, where in the dbg.declare -> dbg.value conversion,
the llvm.dbg.value needs to be called on the actual loaded value, rather
than the address (since the whole point of this transformation is to be
able to get rid of the alloca). Further, now that that's cleaned up, we
can remove a hack in the backend, that would add an implicit OP_deref if
the argument to dbg.value was an alloca. This stems from before the
existence of DIExpression and is no longer necessary since the deref can
be expressed explicitly.
Now, in order to make sure that the tests pass with this change, we need to
correct the printing of DEBUG_VALUE comments to take into account the
expression, which wasn't taken into account before.
Unfortunately, for both these changes, there were a number of incorrect
test cases (mostly the wrong number of DW_OP_derefs, but also a couple
where the test itself was broken more badly). aprantl and I have gone
through and adjusted these test case in order to make them pass with
these fixes and in some cases to make sure they're actually testing
what they are meant to test.
Reviewers: aprantl
Subscribers: dsanders
Differential Revision: http://reviews.llvm.org/D14186
llvm-svn: 256077
Summary:
If Candiadte may have a different type from GEP, we should bitcast or
pointer cast it to GEP's type so that the later RAUW doesn't complain.
Added a test in nary-gep.ll
Reviewers: tra, meheff
Subscribers: mcrosier, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D15618
llvm-svn: 256035
Summary:
Third patch split out from http://reviews.llvm.org/D14752.
Only map in needed DISubroutine metadata (imported or otherwise linked
in functions and other DISubroutine referenced by inlined instructions).
This is supported for ThinLTO, LTO and llvm-link --only-needed, with
associated tests for each one.
Depends on D14838.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14843
llvm-svn: 256003
Inspired by the bug reported in 25846. Whatever we end up doing about that one, the value handle change is a generally good one since it will help catch this type of mistake more quickly.
Patch by: Manuel Jacob
llvm-svn: 255984
This extends the same line of reasoning used in EarlyCSE w/http://reviews.llvm.org/D15352 to the DSE implementation in InstCombine.
Key points:
* We only remove unordered or simple stores.
* The loads producing values consumed by dead stores don't influence whether the store is dead.
Differential Revision: http://reviews.llvm.org/D15354
llvm-svn: 255932
The rules for removing trivially dead stores are a lot less complicated than loads. Since we know the later store post dominates the former and the former dominates the later, unless the former has side effects other than the actual store, we can remove it. One slightly surprising thing is that we can freely remove atomic stores, even if the later one isn't atomic. There's no guarantee the atomic one was every visible.
For the moment, we don't handle DSE of ordered atomic stores. We could extend the same chain of reasoning to them, but the catch is we'd then have to model the ordering effect without a store instruction. Since our fences are a stronger than our operation orderings, simple using a fence isn't an obvious win. This arguable calls for a refinement in our fence specification, but that's (much) later work.
Differential Revision: http://reviews.llvm.org/D15352
llvm-svn: 255914
Summary:
Second patch split out from http://reviews.llvm.org/D14752.
Maps metadata as a post-pass from each module when importing complete,
suturing up final metadata to the temporary metadata left on the
imported instructions.
This entails saving the mapping from bitcode value id to temporary
metadata in the importing pass, and from bitcode value id to final
metadata during the metadata linking postpass.
Depends on D14825.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14838
llvm-svn: 255909
As of r255720, the loop pass manager will DTRT when passes update the
loop info for removed loops, so they no longer need to reach into
LPPassManager APIs to do this kind of transformation. This change very
nearly removes the need for the LPPassManager to even be passed into
loop passes - the only remaining pass that uses the LPM argument is
LoopUnswitch.
llvm-svn: 255797
When considering incoming values as part of a reduction phi, ensure the
incoming value is dominated by said phi.
Failing to ensure this property causes miscompiles.
Fixes PR25787.
Many thanks to Mattias Eriksson for reporting, reducing and analyzing the
problem for me.
Differential Revision: http://reviews.llvm.org/D15580
llvm-svn: 255792
In conditional store merging, we were creating PHIs when we didn't
need to. If the value to be predicated isn't defined in the block
we're predicating, then it doesn't need a PHI at all (because we only
deal with triangles and diamonds, any value not in the predicated BB
must dominate the predicated BB).
This fixes a large code size increase in some benchmarks in a popular embedded benchmark suite.
Now with a fix (and fixed tests) for the conformance issue seen in Chromium.
llvm-svn: 255767
Extend EarlyCSE with an additional style of dead store elimination. If we write back a value just read from that memory location, we can eliminate the store under the assumption that the value hasn't changed.
I'm implementing this mostly because I noticed the omission when looking at the code. It seemed strange to have InstCombine have a peephole which was more powerful than EarlyCSE. :)
Differential Revision: http://reviews.llvm.org/D15397
llvm-svn: 255739
An LTO pass that generates a __cfi_check() function that validates a
call based on a hash of the call-site-known type and the target
pointer.
llvm-svn: 255693
(This is the third attempt to check in this patch, and the first two are r255454
and r255460. The once failed test file reg-usage.ll is now moved to
test/Transform/LoopVectorize/X86 directory with target datalayout and target
triple indicated.)
LoopVectorizationCostModel::calculateRegisterUsage() is used to estimate the
register usage for specific VFs. However, it takes into account many
instructions that won't be vectorized, such as induction variables,
GetElementPtr instruction, etc.. This makes the loop vectorizer too conservative
when choosing VF. In this patch, the induction variables that won't be
vectorized plus GetElementPtr instruction will be added to ValuesToIgnore set
so that their register usage won't be considered any more.
Differential revision: http://reviews.llvm.org/D15177
llvm-svn: 255691
SimplifyCFG allows tail merging with code which terminates in
unreachable which, in turn, makes it possible for an invoke to end up in
a funclet which it was not originally part of.
Using operand bundles on invokes allows us to determine whether or not
an invoke was part of a funclet in the source program.
Furthermore, it allows us to unambiguously answer questions about the
legality of inlining into call sites which the personality may have
trouble with.
Differential Revision: http://reviews.llvm.org/D15517
llvm-svn: 255674
A large number of loop utility functions take a `Pass *` and reach
into it to find out which analyses to preserve. There are a number of
problems with this:
- The APIs have access to pretty well any Pass state they want, so
it's hard to tell what they may or may not do.
- Other APIs have copied these and pass around a `Pass *` even though
they don't even use it. Some of these just hand a nullptr to the API
since the callers don't even have a pass available.
- Passes in the new pass manager don't work like the current ones, so
the APIs can't be used as is there.
Instead, we should explicitly thread the analysis results that we
actually care about through these APIs. This is both simpler and more
reusable.
llvm-svn: 255669
This is the last general step to allow more IR-level speculation with a safety harness in place in CodeGenPrepare.
The intent is to restore the behavior enabled by:
http://reviews.llvm.org/rL228826
but prevent bad performance such as:
https://llvm.org/bugs/show_bug.cgi?id=24818
Earlier patches in this sequence:
D12882 (disable SimplifyCFG speculation for expensive instructions)
D13297 (have CGP despeculate expensive ops)
D14630 (have CGP despeculate special versions of cttz/ctlz)
As shown in the test cases, we only have two instructions currently affected: ctz for some x86 and fdiv generally.
Allowing exactly one expensive instruction is a bit of a hack, but it lines up with what is currently implemented
in CGP. If we make the despeculation more general in CGP, we can make the speculation here more liberal.
A follow-up patch will adjust the cost for sqrt and possibly other typically expensive math intrinsics (currently
everything is cheap by default). GPU targets would likely want to override those expensive default costs (just as
they probably should already override the cost of div/rem) because just about any math is cheaper than control-flow
on those targets.
Differential Revision: http://reviews.llvm.org/D15213
llvm-svn: 255660
This patch does two things:
1. mem2reg is now run immediately after globalopt. Now that globalopt
can localize variables more aggressively, it makes sense to lower
them to SSA form earlier rather than later so they can benefit from
the full set of optimization passes.
2. More scalar optimizations are run after the loop optimizations in
LTO mode. The loop optimizations (especially indvars) can clean up
scalar code sufficiently to make it worthwhile running more scalar
passes. I've particularly added SCCP here as it isn't run anywhere
else in the LTO pass pipeline.
Mem2reg is super cheap and shouldn't affect compilation time at all. The
rest of the added passes are in the LTO pipeline only so doesn't affect
the vast majority of compilations, just the link step.
llvm-svn: 255634
For non padded structs, we can just proceed and deaggregate them.
We don't want ot do this when there is padding in the struct as to not
lose information about this padding (the subsequents passes would then
try hard to preserve the padding, which is undesirable).
Also update extractvalue.ll and cast.ll so that they use structs with padding.
Remove the FIXME in the extractvalue of laod case as the non padded case is
handled when processing the load, and we don't want to do it on the padded
case.
Patch by: Amaury SECHET <deadalnix@gmail.com>
Differential Revision: http://reviews.llvm.org/D14483
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255600
This moves the actual work to do loop rotation into standalone
functions with the analysis results they need passed in as arguments,
leaving the class itself as a relatively simple shim. This will make
the functions easy to reuse when we're ready to port this
transformation to the new pass manager.
llvm-svn: 255574
This just moves some callers after their callees. My next patch will
convert some of these methods to stand alone functions, and that diff
is more obviously NFC if I move these first. That change, in turn,
will make it much easier to port this pass to the new pass manager
once the loop pass manager is in place.
llvm-svn: 255573
This patch converts code that has access to a LLVMContext to not take a
diagnostic handler.
This has a few advantages
* It is easier to use a consistent diagnostic handler in a single program.
* Less clutter since we are not passing a handler around.
It does make it a bit awkward to implement some C APIs that return a
diagnostic string. I will propose new versions of these APIs and
deprecate the current ones.
llvm-svn: 255571
It turns out that terminatepad gives little benefit over a cleanuppad
which calls the termination function. This is not sufficient to
implement fully generic filters but MSVC doesn't support them which
makes terminatepad a little over-designed.
Depends on D15478.
Differential Revision: http://reviews.llvm.org/D15479
llvm-svn: 255522
This patch add support for variadic argument for AArch64. All the MSAN
unit tests are not passing as well the signal_stress_test (currently
set as XFAIl for aarch64).
llvm-svn: 255495
In conditional store merging, we were creating PHIs when we didn't
need to. If the value to be predicated isn't defined in the block
we're predicating, then it doesn't need a PHI at all (because we only
deal with triangles and diamonds, any value not in the predicated BB
must dominate the predicated BB).
This fixes a large code size increase in some benchmarks in a popular embedded benchmark suite.
llvm-svn: 255489
(This is the second attempt to check in this patch: REQUIRES: asserts is added
to reg-usage.ll now.)
LoopVectorizationCostModel::calculateRegisterUsage() is used to estimate the
register usage for specific VFs. However, it takes into account many
instructions that won't be vectorized, such as induction variables,
GetElementPtr instruction, etc.. This makes the loop vectorizer too conservative
when choosing VF. In this patch, the induction variables that won't be
vectorized plus GetElementPtr instruction will be added to ValuesToIgnore set
so that their register usage won't be considered any more.
Differential revision: http://reviews.llvm.org/D15177
llvm-svn: 255460
LoopVectorizationCostModel::calculateRegisterUsage() is used to estimate the
register usage for specific VFs. However, it takes into account many
instructions that won't be vectorized, such as induction variables,
GetElementPtr instruction, etc.. This makes the loop vectorizer too conservative
when choosing VF. In this patch, the induction variables that won't be
vectorized plus GetElementPtr instruction will be added to ValuesToIgnore set
so that their register usage won't be considered any more.
Differential revision: http://reviews.llvm.org/D15177
llvm-svn: 255454
Before the patch, -fprofile-instr-generate compile will fail
if no integrated-as is specified when the file contains
any static functions (the -S output is also invalid).
This is the second try. The fix in this patch is very localized.
Only profile symbol names of profile symbols with internal
linkage are fixed up while initializer of name syms are not
changes. This means there is no format change nor version bump.
llvm-svn: 255434
This change was discussed in D15392. It allows us to remove the fold that was added
in:
http://reviews.llvm.org/r255261
...and it will allow us to generalize this fold:
http://reviews.llvm.org/rL112232
while preserving the order of bitcast + extract that it produces and testing shows
is better handled by the backend.
Note that the existing check for "isVectorTy()" wasn't strong enough in general
and specifically because: x86_mmx. It's not a vector, but it's not vectorizable
either. So here we check VectorType::isValidElementType() directly before
proceeding with the transform.
llvm-svn: 255433
While we have successfully implemented a funclet-oriented EH scheme on
top of LLVM IR, our scheme has some notable deficiencies:
- catchendpad and cleanupendpad are necessary in the current design
but they are difficult to explain to others, even to seasoned LLVM
experts.
- catchendpad and cleanupendpad are optimization barriers. They cannot
be split and force all potentially throwing call-sites to be invokes.
This has a noticable effect on the quality of our code generation.
- catchpad, while similar in some aspects to invoke, is fairly awkward.
It is unsplittable, starts a funclet, and has control flow to other
funclets.
- The nesting relationship between funclets is currently a property of
control flow edges. Because of this, we are forced to carefully
analyze the flow graph to see if there might potentially exist illegal
nesting among funclets. While we have logic to clone funclets when
they are illegally nested, it would be nicer if we had a
representation which forbade them upfront.
Let's clean this up a bit by doing the following:
- Instead, make catchpad more like cleanuppad and landingpad: no control
flow, just a bunch of simple operands; catchpad would be splittable.
- Introduce catchswitch, a control flow instruction designed to model
the constraints of funclet oriented EH.
- Make funclet scoping explicit by having funclet instructions consume
the token produced by the funclet which contains them.
- Remove catchendpad and cleanupendpad. Their presence can be inferred
implicitly using coloring information.
N.B. The state numbering code for the CLR has been updated but the
veracity of it's output cannot be spoken for. An expert should take a
look to make sure the results are reasonable.
Reviewers: rnk, JosephTremoulet, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D15139
llvm-svn: 255422
DenseMap is the wrong data structure to use for sample records and call
sites. The keys are too large, causing massive core memory growth when
reading profiles.
Before this patch, a 21Mb input profile was causing the compiler to grow
to 3Gb in memory. By switching to std::map, the compiler now grows to
300Mb in memory.
There still are some opportunities for memory footprint reduction. I'll
be looking at those next.
llvm-svn: 255389
Revert "[DSE] Disable non-local DSE to see if the bots go green."
Revert "[DeadStoreElimination] Use range-based loops. NFC."
Revert "[DeadStoreElimination] Add support for non-local DSE."
llvm-svn: 255354
GlobalsAA's assumptions that passes do not escape globals not previously
escaped is not violated by AlignmentFromAssumptions and SLPVectorizer. Marking
them as such allows GlobalsAA to be preserved until GVN in the LTO pipeline.
http://lists.llvm.org/pipermail/llvm-dev/2015-December/092972.html
Patch by Vaivaswatha Nagaraj!
llvm-svn: 255348
Mem2Reg shouldn't be optimizing a function that is marked
optnone. There is a test checking this that fails when mem2reg is
explicitly added to the standard pass pipeline.
llvm-svn: 255336
MatchBSwap has most of the functionality to match bit reversals already. If we switch it from looking at bytes to individual bits and remove a few early exits, we can extend the main recursive function to match any sequence of ORs, ANDs and shifts that assemble a value from different parts of another, base value. Once we have this bit->bit mapping, we can very simply detect if it is appropriate for a bswap or bitreverse.
llvm-svn: 255334
This is a redo of r255137 (reverted at r255227) which was a redo of
r255124 (reverted at r255126) with a fixed check for a scalar source
type and an added test for the failure that caused the revert.
Original commit message:
Example:
bitcast (extractelement (bitcast <2 x float> %X to <2 x i32>), 1) to float
--->
extractelement <2 x float> %X, i32 1
This is part of fixing PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
The next step will be to generalize this fold:
trunc ( lshr ( bitcast X) ) -> extractelement (X)
Ie, I'm hoping to replace the existing transform of:
bitcast ( trunc ( lshr ( bitcast X)))
added by:
http://reviews.llvm.org/rL112232
with 2 less specific transforms to catch the case in the bug report.
Differential Revision: http://reviews.llvm.org/D14879
llvm-svn: 255261
Added some missing spaces between the module identifier and the start of
the debug message. Also added a ":" after the module identifier to make
this look a little nicer.
llvm-svn: 255259
We extend the search for redundant stores to predecessor blocks that
unconditionally lead to the block BB with the current store instruction. That
also includes single-block loops that unconditionally lead to BB, and
if-then-else blocks where then- and else-blocks unconditionally lead to BB.
http://reviews.llvm.org/D13363
Patch by Ivan Baev <ibaev@codeaurora.org>!
llvm-svn: 255247
Summary:
LAA uses the PredicatedScalarEvolution interface, so it can produce
forward/backward dependences having SCEVs that are AddRecExprs only after being
transformed by PredicatedScalarEvolution.
Use PredicatedScalarEvolution to get the expected expressions.
Reviewers: anemet
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D15382
llvm-svn: 255241
- This simplifies the CallSite class, arg_begin / arg_end are now
simple wrapper getters.
- In several places, we were creating CallSite instances solely to call
arg_begin and arg_end. With this change, that's no longer required.
llvm-svn: 255226
`CloneAndPruneIntoFromInst` can DCE instructions after cloning them into
the new function, and so an AssertingVH is too strong. This change
switches CloneCodeInfo to use a std::vector<WeakVH>.
llvm-svn: 255148
This is a redo of r255124 (reverted at r255126) with an added check for a
scalar destination type and an added test for the failure seen in Clang's
test/CodeGen/vector.c. The extra test shows a different missing optimization.
Original commit message:
Example:
bitcast (extractelement (bitcast <2 x float> %X to <2 x i32>), 1) to float
--->
extractelement <2 x float> %X, i32 1
This is part of fixing PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
The next step will be to generalize this fold:
trunc ( lshr ( bitcast X) ) -> extractelement (X)
Ie, I'm hoping to replace the existing transform of:
bitcast ( trunc ( lshr ( bitcast X)))
added by:
http://reviews.llvm.org/rL112232
with 2 less specific transforms to catch the case in the bug report.
Differential Revision: http://reviews.llvm.org/D14879
llvm-svn: 255137
The bug in IndVarSimplify was fixed in r254976, r254977, so I'm
reapplying the original patch for avoiding redundant LCSSA recomputation.
This reverts commit ffe3b434e505e403146aff00be0c177bb6d13466.
llvm-svn: 255133
This new patch fixes a few bugs that exposed in last submit. It also improves
the test cases.
--Original Commit Message--
This patch implements a minimum spanning tree (MST) based instrumentation for
PGO. The use of MST guarantees minimum number of CFG edges getting
instrumented. An addition optimization is to instrument the less executed
edges to further reduce the instrumentation overhead. The patch contains both the
instrumentation and the use of the profile to set the branch weights.
Differential Revision: http://reviews.llvm.org/D12781
llvm-svn: 255132
Example:
bitcast (extractelement (bitcast <2 x float> %X to <2 x i32>), 1) to float
--->
extractelement <2 x float> %X, i32 1
This is part of fixing PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
The next step will be to generalize this fold:
trunc ( lshr ( bitcast X) ) -> extractelement (X)
Ie, I'm hoping to replace the existing transform of:
bitcast ( trunc ( lshr ( bitcast X)))
added by:
http://reviews.llvm.org/rL112232
with 2 less specific transforms to catch the case in the bug report.
Differential Revision: http://reviews.llvm.org/D14879
llvm-svn: 255124
ScalarEvolution.h, in order to avoid cyclic dependencies between the Transform
and Analysis modules:
[LV][LAA] Add a layer over SCEV to apply run-time checked knowledge on SCEV expressions
Summary:
This change creates a layer over ScalarEvolution for LAA and LV, and centralizes the
usage of SCEV predicates. The SCEVPredicatedLayer takes the statically deduced knowledge
by ScalarEvolution and applies the knowledge from the SCEV predicates. The end goal is
that both LAA and LV should use this interface everywhere.
This also solves a problem involving the result of SCEV expression rewritting when
the predicate changes. Suppose we have the expression (sext {a,+,b}) and two predicates
P1: {a,+,b} has nsw
P2: b = 1.
Applying P1 and then P2 gives us {a,+,1}, while applying P2 and the P1 gives us
sext({a,+,1}) (the AddRec expression was changed by P2 so P1 no longer applies).
The SCEVPredicatedLayer maintains the order of transformations by feeding back
the results of previous transformations into new transformations, and therefore
avoiding this issue.
The SCEVPredicatedLayer maintains a cache to remember the results of previous
SCEV rewritting results. This also has the benefit of reducing the overall number
of expression rewrites.
Reviewers: mzolotukhin, anemet
Subscribers: jmolloy, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14296
llvm-svn: 255122
Summary:
This change creates a layer over ScalarEvolution for LAA and LV, and centralizes the
usage of SCEV predicates. The SCEVPredicatedLayer takes the statically deduced knowledge
by ScalarEvolution and applies the knowledge from the SCEV predicates. The end goal is
that both LAA and LV should use this interface everywhere.
This also solves a problem involving the result of SCEV expression rewritting when
the predicate changes. Suppose we have the expression (sext {a,+,b}) and two predicates
P1: {a,+,b} has nsw
P2: b = 1.
Applying P1 and then P2 gives us {a,+,1}, while applying P2 and the P1 gives us
sext({a,+,1}) (the AddRec expression was changed by P2 so P1 no longer applies).
The SCEVPredicatedLayer maintains the order of transformations by feeding back
the results of previous transformations into new transformations, and therefore
avoiding this issue.
The SCEVPredicatedLayer maintains a cache to remember the results of previous
SCEV rewritting results. This also has the benefit of reducing the overall number
of expression rewrites.
Reviewers: mzolotukhin, anemet
Subscribers: jmolloy, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14296
llvm-svn: 255115
loading the source Module, linking the function in the destination
module, and destroying the source Module before repeating with the
next function to import (potentially from the same Module).
Ideally we would keep the source Module alive and import the next
Function needed from this Module. Unfortunately this is not possible
because the linker does not leave it in a usable state.
However we can do better by first computing the list of all candidates
per Module, and only then load the source Module and import all the
function we need for it.
The trick to process callees is to materialize function in the source
module when building the list of function to import, and inspect them
in their source module, collecting the list of callees for each
callee.
When we move the the actual import, we will import from each source
module exactly once. Each source module is loaded exactly once.
The only drawback it that it requires to have all the lazy-loaded
source Module in memory at the same time.
Currently this patch already improves considerably the link time,
a multithreaded link of llvm-dis on my laptop was:
real 1m12.175s user 6m32.430s sys 0m10.529s
and is now:
real 0m40.697s user 2m10.237s sys 0m4.375s
Note: this is the full link time (linker+Import+Optimizer+CodeGen)
Differential Revision: http://reviews.llvm.org/D15178
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255100
For an invoke with operand bundles, the [op_begin(), op_end()-3] range
can contain things other than invoke arguments. This change teaches
PruneEH to use arg_begin() and arg_end() explicitly.
llvm-svn: 255073
This patch teaches the fully redundant load part of EarlyCSE how to forward from atomic and volatile loads and stores, and how to eliminate unordered atomics (only). This patch does not include dead store elimination support for unordered atomics, that will follow in the near future.
The basic idea is that we allow all loads and stores to be tracked by the AvailableLoad table. We store a bit in the table which tracks whether load/store was atomic, and then only replace atomic loads with ones which were also atomic.
No attempt is made to refine our handling of ordered loads or stores. Those are still treated as full fences. We could pretty easily extend the release fence handling to release stores, but that should be a separate patch.
Differential Revision: http://reviews.llvm.org/D15337
llvm-svn: 255054
The StringRef constructor is unnecessary (since we're converting to
std::string anyway), and having it requires an explicit call to
StringRef's or std::string's constructor.
llvm-svn: 255000
Summary:
Also add a stricter post-condition for IndVarSimplify.
Fixes PR25578. Test case by Michael Zolotukhin.
Reviewers: hfinkel, atrick, mzolotukhin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15059
llvm-svn: 254977
254950 ended up being not NFC. The previous code was overriding the flags for whether an instruction read or wrote memory using the target specific flags returned via TTI. I'd missed this in my refactoring. Since I mistakenly built only x86 and didn't notice the number of unsupported tests, I didn't catch that before the original checkin.
This raises an interesting issue though. Given we have function attributes (i.e. readonly, readnone, argmemonly) which describe the aliasing of intrinsics, why does TTI have this information overriding the instruction definition at all? I see no reason for this, but decided to preserve existing behavior for the moment. The root issue might be that we don't have a "writeonly" attribute.
Original commit message:
[EarlyCSE] Simplify and invert ParseMemoryInst [NFCI]
Restructure ParseMemoryInst - which was introduced to abstract over target specific load and stores instructions - to just query the underlying instructions. In theory, this could be slightly slower than caching the results, but in practice, it's very unlikely to be measurable.
The simple query scheme makes it far easier to understand, and much easier to extend with new queries. Given I'm about to need to add new query types, doing the cleanup first seemed worthwhile.
Do we still believe the target specific intrinsic handling is worthwhile in EarlyCSE? It adds quite a bit of complexity and makes the code harder to read. Being able to delete the abstraction entirely would be wonderful.
llvm-svn: 254957
Restructure ParseMemoryInst - which was introduced to abstract over target specific load and stores instructions - to just query the underlying instructions. In theory, this could be slightly slower than caching the results, but in practice, it's very unlikely to be measurable.
The simple query scheme makes it far easier to understand, and much easier to extend with new queries. Given I'm about to need to add new query types, doing the cleanup first seemed worthwhile.
Do we still believe the target specific intrinsic handling is worthwhile in EarlyCSE? It adds quite a bit of complexity and makes the code harder to read. Being able to delete the abstraction entirely would be wonderful.
llvm-svn: 254950
Summary:
Add a field on the PassManagerBuilder that clang or gold can use to pass
down a pointer to the function index in memory to use for importing when
the ThinLTO backend is triggered. Add support to supply this to the
function import pass.
Reviewers: joker.eph, dexonsmith
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D15024
llvm-svn: 254926
Summary:
There are `SelectPatternFlavor`s that don't represent min or max idioms,
and we should not be passing those to `getCmpPredicateForMinMax`.
Fixes PR25745.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15249
llvm-svn: 254869
Summary: If the same pass manager is used for multiple modules ASAN
complains about GlobalsMD being initialized twice. Fix this by
resetting GlobalsMD in a new doFinalization method to allow this
use case.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14962
llvm-svn: 254851
When the notion of target specific memory intrinsics was introduced to EarlyCSE, the commit confused the notions of volatile and simple memory access. Since I'm about to start working on this area, cleanup the naming so that patches aren't horribly confusing. Note that the actual implementation was always bailing if the load or store wasn't simple.
Reminder:
- "volatile" - C++ volatile, can't remove any memory operations, but in principal unordered
- "ordered" - imposes ordering constraints on other nearby memory operations
- "atomic" - can't be split or sheared. In LLVM terms, all "ordered" operations are also atomic so the predicate "isAtomic" is often used.
- "simple" - a load which is none of the above. These are normal loads and what most of the optimizer works with.
llvm-svn: 254805
Summary:
In order to avoid calling pow function we generate repeated fmul when n is a
positive or negative whole number.
For each exponent we pre-compute Addition Chains in order to minimize the no.
of fmuls.
Refer: http://wwwhomes.uni-bielefeld.de/achim/addition_chain.html
We pre-compute addition chains for exponents upto 32 (which results in a max of
7 fmuls).
For eg:
4 = 2+2
5 = 2+3
6 = 3+3 and so on
Hence,
pow(x, 4.0) ==> y = fmul x, x
x = fmul y, y
ret x
For negative exponents, we simply compute the reciprocal of the final result.
Note: This transformation is only enabled under fast-math.
Patch by Mandeep Singh Grang <mgrang@codeaurora.org>
Reviewers: weimingz, majnemer, escha, davide, scanon, joerg
Subscribers: probinson, escha, llvm-commits
Differential Revision: http://reviews.llvm.org/D13994
llvm-svn: 254776
For PowerPC64 we cannot just pass SP extracted from @llvm.stackrestore to
_asan_allocas_unpoison due to specific ABI requirements
(http://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.html#DYNAM-STACK).
This patch adds the value returned by @llvm.get.dynamic.area.offset to
extracted from @llvm.stackrestore stack pointer, so dynamic allocas unpoisoning
stuff would work correctly on PowerPC64.
Patch by Max Ostapenko.
Differential Revision: http://reviews.llvm.org/D15108
llvm-svn: 254707
time.
The new overloaded function is used when an attribute is added to a
large number of slots of an AttributeSet (for example, to function
parameters). This is much faster than calling AttributeSet::addAttribute
once per slot, because AttributeSet::getImpl (which calls
FoldingSet::FIndNodeOrInsertPos) is called only once per function
instead of once per slot.
With this commit, clang compiles a file which used to take over 22
minutes in just 13 seconds.
rdar://problem/23581000
Differential Revision: http://reviews.llvm.org/D15085
llvm-svn: 254491
For efficiency reason, when importing multiple functions for the same Module,
we can avoid reparsing it every time.
Differential Revision: http://reviews.llvm.org/D15102
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 254486
When linking static archive, there is no individual module files to
load. Instead they can be mmap'ed and could be initialized from a
buffer directly. The callback provide flexibility to override the
scheme for loading module from the summary.
Differential Revision: http://reviews.llvm.org/D15101
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 254479
The difference is that now we don't error on out-of-comdat access to
internal global values. We copy them instead. This seems to match the
expectation of COFF linkers (see pr25686).
Original message:
Start deciding earlier what to link.
A traditional linker is roughly split in symbol resolution and
"copying
stuff".
The two tasks are badly mixed in lib/Linker.
This starts splitting them apart.
With this patch there are no direct call to linkGlobalValueBody or
linkGlobalValueProto. Everything is linked via WapValue.
This also includes a few fixes:
* A GV goes undefined if the comdat is dropped (comdat11.ll).
* We error if an internal GV goes undefined (comdat13.ll).
* We don't link an unused comdat.
The first two match the behavior of an ELF linker. The second one is
equivalent to running globaldce on the input.
llvm-svn: 254418
The current code does not take alloca array size into account and,
as a result, considers any access past the first array element to be
unsafe.
llvm-svn: 254350
A traditional linker is roughly split in symbol resolution and "copying
stuff".
The two tasks are badly mixed in lib/Linker.
This starts splitting them apart.
With this patch there are no direct call to linkGlobalValueBody or
linkGlobalValueProto. Everything is linked via WapValue.
This also includes a few fixes:
* A GV goes undefined if the comdat is dropped (comdat11.ll).
* We error if an internal GV goes undefined (comdat13.ll).
* We don't link an unused comdat.
The first two match the behavior of an ELF linker. The second one is
equivalent to running globaldce on the input.
llvm-svn: 254336
This one is enabled only under -ffast-math. There are cases where the
difference between the value computed and the correct value is huge
even for ffast-math, e.g. as Steven pointed out:
x = -1, y = -4
log(pow(-1), 4) = 0
4*log(-1) = NaN
I checked what GCC does and apparently they do the same optimization
(which result in the dramatic difference). Future work might try to
make this (slightly) less worse.
Differential Revision: http://reviews.llvm.org/D14400
llvm-svn: 254263
This fixes buildbots in systems that std::to_string is not present. It
also tidies the output of the diagnostic to render doubles a bit better
(thanks Ben Kramer for help with string streams and format).
llvm-svn: 254261
This adds two thresholds to the sample profiler to affect inlining
decisions: the concept of global hotness and coldness.
Functions that have accumulated more than a certain fraction of samples at
runtime, are annotated with the InlineHint attribute. Conversely,
functions that accumulate less than a certain fraction of samples, are
annotated with the Cold attribute.
This is very similar to the hints emitted by Clang when using
instrumentation profiles.
Notice that this is a very blunt instrument. A function may have
globally collected a significant fraction of samples, but that does not
necessarily mean that every callsite for that function is hot.
Ideally, we would annotate each callsite with the samples collected at
that callsite. This way, the inliner can incorporate all these weights
into its cost model.
Once the inliner offers this functionality, we can change the hints
emitted here to a more precise per-callsite annotation. For now, this is
providing some measure of speedups with our internal benchmarks. I've
observed speedups of up to 23% (though the geo mean is about 3%). I expect
these numbers to improve as the inliner gets better annotations.
llvm-svn: 254212
Based on testing of internal benchmarks, I'm lowering this threshold to
a value of 0.1%. This means that SamplePGO will respect 99.9% of the
original inline decisions when following a profile.
The performance difference is noticeable in some tests. With the
previous threshold, the speedups over baseline -O2 was about 0.63%. With
the new default, the speedups are around 3% on average.
The point of this threshold is not to do more aggressive inlining. When
an inlined callsite crosses this threshold, SamplePGO will redo the
inline decision so that it can better apply the input profile.
By respecting most original inline decisions, we can apply more of the
input profile because the shape of the code follows the profile more
closely.
In the next series, I'll be looking at adding some inline hints for the
cold callsites and for toplevel functions that are hot/cold as well.
llvm-svn: 254211
Now the ValueMapper has two callbacks. The first one maps the
declaration. The ValueMapper records the mapping and then materializes
the body/initializer.
llvm-svn: 254209
This patch changes the DFSan instrumentation for aarch64 to instead
of using fixes application mask defined by SANITIZER_AARCH64_VMA
to read the application shadow mask value from compiler-rt. The value
is initialized based on runtime VAM detection.
Along with this patch a compiler-rt one will also be added to export
the shadow mask variable.
llvm-svn: 254196
The order in which instructions are truncated in truncateToMinimalBitwidths
effects code generation. Switch to a map with a determinisic order, since the
iteration order over a DenseMap is not defined.
This code is not hot, so the difference in container performance isn't
interesting.
Many thanks to David Blaikie for making me aware of MapVector!
Fixes PR25490.
Differential Revision: http://reviews.llvm.org/D14981
llvm-svn: 254179
They are as much trouble as aliases to declarations. They are requiring
the code generator to define a symbol with the same value as another
symbol, but the second symbol is undefined.
If representing this is important for some optimization, we could add
support for available_externally aliases. They would be *required* to
point to a declaration (or available_externally definition).
llvm-svn: 254170
Add a simple initial heuristic to control importing based on the number
of instructions recorded in the function's summary. Add option to
control the limit, and test using option.
llvm-svn: 254036
When the original binary is executed and sampled, the resulting profile
contains information on the original inline stack. We currently follow
the original inline plan if we notice that the inlined callsite has more
than 0 samples to it.
A better way is to determine whether the callsite is actually worth
inlining. If the callsite accumulates a small fraction of the samples
spent in the parent function, then we don't want to bother inlining it
(as it means that the callsite is actually cold).
This patch introduces a threshold expressed in percentage of samples
in relation to the parent function. If the callsite uses less than N%
of the total samples used by its parent, the original inline decision is
not re-applied.
I've set the threshold to the very arbitrary value of 5%. I'm yet to do
any actual experiments to see what's a good value. I wanted to separate
the basic mechanism from the tuning.
llvm-svn: 254034
This patch implements a minimum spanning tree (MST) based instrumentation for
PGO. The use of MST guarantees minimum number of CFG edges getting
instrumented. An addition optimization is to instrument the less executed
edges to further reduce the instrumentation overhead. The patch contains both the
instrumentation and the use of the profile to set the branch weights.
Differential Revision: http://reviews.llvm.org/D12781
llvm-svn: 254021
Analyze imported function bodies and add any new external calls to
the worklist for importing. Currently no controls on the importing
so this will end up importing everything possible in the call tree
below the importing module. Basic profitability checks coming next.
Update test to check for iteratively inlined functions.
llvm-svn: 254011
Summary:
Followed the guidelines in:
http://llvm.org/docs/CodingStandards.html#include-style
However, I noticed that uppercase named headers come before lowercase ones
throughout the codebase. So kept them as is.
Patch by Mandeep Singh Grang <mgrang@codeaurora.org>
Reviewers: majnemer, davide, jmolloy, atrick
Subscribers: sanjoy
Differential Revision: http://reviews.llvm.org/D14939
llvm-svn: 254005
Skip imports for weak_any aliases as well. Fix the test to check
non-import of weak aliases and functions, and import of normal alias.
llvm-svn: 253991
Summary:
This is a helper to perform cross-module import for ThinLTO. Right now
it is importing naively every possible called functions.
Reviewers: tejohnson
Subscribers: dexonsmith, llvm-commits
Differential Revision: http://reviews.llvm.org/D14914
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 253954
The existing coverage tracker counts the number of records that were used
from the input profile. An alternative view of coverage is to check how
many available samples were applied.
This way, if the profile contains several records with few samples, it
doesn't really matter much that they were not applied. The more
interesting records to apply are the ones that contribute many samples.
llvm-svn: 253912
In profile runtime implementation for Darwin, Linux and FreeBSD, the
names of sections holding profile control/counter/naming data need
to be known by the runtime in order to locate the start/end of the
data. Moving the name definitions to the common file to specify the
connection.
llvm-svn: 253814
If a function was originally inlined but not actually hot at runtime,
its samples will not be counted inside the parent function. This throws
off the coverage calculation because it expects to find more used
records than it should.
Fixed by ignoring functions that will not be inlined into the parent.
Currently, this is inlined functions with 0 samples. In subsequent
patches, I'll change this to mean "cold" functions.
llvm-svn: 253716
This reverts r253661.
Turns out that the assignment is not redundant (despite the Clang static analyzer claiming the opposite).
The variable is being used by the lambda function AddUsersToWorklistIfCapturing().
llvm-svn: 253696
While debugging some sampling coverage problems, I found this useful:
When applying samples from a profile, it helps to also know what line
offset and discriminator the sample belongs to. This makes it easy to
correlate against the input profile.
llvm-svn: 253670
Terrifyingly, one of them is a mishandling of floating point vectors
in Constant::isZero(). How exactly this issue survived this long
is beyond me.
llvm-svn: 253655
The change exposed a bug in IndVarSimplify (PR25578), which led to a
failure (PR25538). When the bug is fixed, this patch can be reapplied.
The tests are kept in tree, as they're useful anyway, and will not break
with this revert.
llvm-svn: 253596
Summary: The new algorithm is more efficient (O(n), n is number of basic blocks). And it is guaranteed to cover all cases of multiple BB mapped to same line.
Reviewers: dblaikie, davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14738
llvm-svn: 253594
We currently bail out of global localization if the global has non-instruction users. However, often these can be simple bitcasts or constant-GEPs, which we can easily turn into instructions before localizing. Be a bit more aggressive.
llvm-svn: 253584
This provides a way to force a function to have certain attributes from the command line. This can be useful when debugging or doing workload exploration, where manually editing IR is tedious or not possible (due to build systems etc).
The syntax is -force-attribute=function_name:attribute_name
All function attributes are parsed except alignstack as it requires an argument.
llvm-svn: 253550
Optimizations like LoadPRE in GVN will insert new instructions.
If the insertion point is in a already processed BB, they should
get a value number explicitly. If the insertion point is after
current instruction, then just leave it. However, current GVN framework
has no support for it.
In this patch, we just bail out if a VN can't be found.
Dfferential Revision: http://reviews.llvm.org/D14670
A test/Transforms/GVN/pr25440.ll
M lib/Transforms/Scalar/GVN.cpp
llvm-svn: 253536
This bug would manifest in some very specific cases where all the following
conditions are fullfilled:
- GVN didn't remove block
- The regular GVN iteration didn't change the IR
- PRE is enabled
- PRE will not split critical edge
- The last instruction processed by PRE didn't change the IR
Because the CallGraph PassManager relies on this returned value to decide
if it needs to recompute a node after the execution of Function passes,
not returning the right value can lead to unexpected results.
Fix for: https://llvm.org/bugs/show_bug.cgi?id=24715
Patch by Wenxiang Qiu <vincentqiuuu@gmail.com>
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 253518
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
This change introduces an instrumentation intrinsic instruction for
value profiling purposes, the lowering of the instrumentation intrinsic
and raw reader updates. The raw profile data files for llvm-profdata
testing are updated.
llvm-svn: 253484
Summary:
This change teaches LLVM's inliner to track and suitably adjust
deoptimization state (tracked via deoptimization operand bundles) as it
inlines through call sites. The operation is described in more detail
in the LangRef changes.
Reviewers: reames, majnemer, chandlerc, dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14552
llvm-svn: 253438
The logic for handling the pattern without a shift is identical
to the logic for handling the pattern with a shift if you set
the shift amount to zero for the former.
This should make it easier to see that we probably don't even need
optimizeIntToFloatBitCast().
If we call something like foldVecTruncToExtElt() from visitTrunc(),
we'll solve PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
llvm-svn: 253403
The instruction combiner previously removed types from filter clauses in Landing Pad instructions if the type had previously been seen in a catch clause. This is incorrect and prevents unexpected exception handlers from rethrowing the caught type.
Differential Revision: http://reviews.llvm.org/D14669
llvm-svn: 253370
While setting function attributes we check all instructions that may access memory. For a call instruction we check all arguments. The special check is required for pointers.
I added vector-of-pointers to the call arguments types that should be checked.
Differential Revision: http://reviews.llvm.org/D14693
llvm-svn: 253363
In r253126 we stopped to recompute LCSSA after loop unrolling in all
cases, except the unrolling is full and at least one of the loop exits
is outside the parent loop. In other cases the transformation should not
break LCSSA, but it turned out, that we also call SimplifyLoop on the
parent loop, which might break LCSSA by itself. This fix just triggers
LCSSA recomputation in this case as well.
I'm committing it without a test case for now, but I'll try to invent
one. It's a bit tricky because in an isolated test LoopSimplify would
be scheduled before LoopUnroll, and thus will change the test and hide
the problem.
llvm-svn: 253253
We sometimes create intermediate subtract instructions during
reassociation. Adding these to the worklist to revisit exposes many
additional reassociation opportunities.
Patch by Aditya Nandakumar.
llvm-svn: 253240
We tried to move the insertion point beyond instructions like landingpad
and cleanuppad.
However, we *also* tried to move past catchpad. This is problematic
because catchpad is also a terminator.
This fixes PR25541.
llvm-svn: 253238
Summary:
This fails a check in Verifier.cpp, which checks for location matches between the declared
variable and the !dbg attachments.
Reviewers: dnovillo, dblaikie, danielcdh
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14657
llvm-svn: 253194
Address Duncan Exon Smith's comments on D14148, which was added after the patch had been LGTM'd and committed:
* clang-format one area where whitespace diffs occurred.
* Add a threshold to limit the store/load dominance checks as they are quadratic.
llvm-svn: 253192
Summary: The Old personality function gets copied over, but the
Materializer didn't have a chance to inspect it (e.g. to fix up
references to the correct module for the target function).
Also add a verifier check that makes sure the personality routine
is in the same module as the function whose personality it is.
Reviewers: majnemer
Subscribers: jevinskie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14474
llvm-svn: 253183
Summary: Moving landingpads into successor basic blocks makes the
verifier sad. Teach Sink that much like PHI nodes and terminator
instructions, landingpads (and cleanuppads, etc.) may not be moved
between basic blocks.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14475
llvm-svn: 253182
Summary:
The patch to move metadata linking after global value linking didn't
correctly map unmaterialized global values to null as desired. They
were in fact mapped to the source copy. It largely worked by accident
since most module linker clients destroyed the source module which
caused the source GVs to be replaced by null, but caused a failure with
LTO linking on Windows:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312869.html
The problem is that a null return value from materializeValueFor is
handled by mapping the value to self. This is the desired behavior when
materializeValueFor is passed a non-GlobalValue. The problem is how to
distinguish that case from the case where we really do want to map to
null.
This patch addresses this by passing in a new flag to the value mapper
indicating that unmapped global values should be mapped to null. Other
Value types are handled as before.
Note that the documented behavior of asserting on unmapped values when
the flag RF_IgnoreMissingValues isn't set is currently disabled with
FIXME notes due to bootstrap failures. I modified these disabled asserts
so when they are eventually enabled again it won't assert for the
unmapped values when the new RF_NullMapMissingGlobalValues flag is set.
I also considered using a callback into the value materializer, but a
flag seemed cleaner given that there are already existing flags.
I also considered modifying materializeValueFor to return the input
value when we want to map to source and then treat a null return
to mean map to null. However, there are other value materializer
subclasses that implement materializeValueFor, and they would all need
to be audited and the return values possibly changed, which seemed
error-prone.
Reviewers: dexonsmith, joker.eph
Subscribers: pcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D14682
llvm-svn: 253170
Global to local demotion can speed up programs that use globals a lot. It is particularly useful with LTO, when the entire call graph is known and most functions have been internalized.
For a global to be demoted, it must only be accessed by one function and that function:
1. Must never recurse directly or indirectly, else the GV would be clobbered.
2. Must never rely on the value in GV at the start of the function (apart from the initializer).
GlobalOpt can already do this, but it is hamstrung and only ever tries to demote globals inside "main", because C++ gives extra guarantees about how main is called - once and only once.
In LTO mode, we can often prove the first property (if the function is internal by this point, we know enough about the callgraph to determine if it could possibly recurse). FunctionAttrs now infers the "norecurse" attribute for this reason.
The second property can be proven for a subset of functions by proving that all loads from GV are dominated by a store to GV. This is conservative in the name of compile time - this only requires a DominatorTree which is fairly cheap in the grand scheme of things. We could do more fancy stuff with MemoryDependenceAnalysis too to catch more cases but this appears to catch most of the useful ones in my testing.
llvm-svn: 253168
The current implementation of GEP visitor in InstCombine fails with assertion on Vector GEP with mix of scalar and vector types, like this:
getelementptr double, double* %a, <8 x i32> %i
(It fails to create a "sext" from <8 x i32> to <8 x i64>)
I fixed it and added some tests.
Differential Revision: http://reviews.llvm.org/D14485
llvm-svn: 253162
Summary:
Currently we always recompute LCSSA for outer loops after unrolling an
inner loop. That leads to compile time problem when we have big loop
nests, and we can solve it by avoiding unnecessary work. For instance,
if w eonly do partial unrolling, we don't break LCSSA, so we don't need
to rebuild it. Also, if all exits from the inner loop are inside the
enclosing loop, then complete unrolling won't break LCSSA either.
I replaced unconditional LCSSA recomputation with conditional recomputation +
unconditional assert and added several tests, which were failing when I
experimented with it.
Soon I plan to follow up with a similar patch for recalculation of dominators
tree.
Reviewers: hfinkel, dexonsmith, bogner, joker.eph, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14526
llvm-svn: 253126
This allows us to transform the below loop into a memcpy.
void test(unsigned *__restrict__ a, unsigned *__restrict__ b) {
for (int i = 2047; i >= 0; --i) {
a[i] = b[i];
}
}
This is the memcpy version of r251518, which added support for memset with
negative strided loops.
llvm-svn: 253091
Use ScalarEvolution to calculate memory access bounds.
Handle function calls based on readnone/nocapture attributes.
Handle memory intrinsics with constant size.
This change improves both recall and precision of IsAllocaSafe.
See the new tests (ex. BitCastWide) for the kind of code that was wrongly
classified as safe.
SCEV efficiency seems to be limited by the fact the SafeStack runs late
(in CodeGenPrepare), and many loops are unrolled or otherwise not in LCSSA.
llvm-svn: 253083
This reapplies r252949. I've changed the type of FuncName to be
std::string instead of StringRef in emitFnAttrCompatCheck.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252990
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252949
There are plenty more instcombines we could probably do with bitreverse, but this seems like a very obvious and trivial starting point and was brought up by Hal in his review.
llvm-svn: 252879
A function can be marked as norecurse if:
* The SCC to which it belongs has cardinality 1; and either
a) It does not call any non-norecurse function. This includes self-recursion; or
b) It only has one callsite and the function that callsite is within is marked norecurse.
a) is best propagated bottom-up and b) is best propagated top-down.
We build up the norecurse attributes bottom-up using the existing SCC pass, and mark functions with no obvious recursion (but not provably norecurse) to sweep later, top-down.
llvm-svn: 252862
First create a list of candidates, then transform. This simplifies the code in
that you have don't have to worry that you may be using an invalidated
iterator.
Previously, each time we created a memset/memcpy we would reevaluate the entire
loop potentially resulting in lots of redundant work for large basic blocks.
llvm-svn: 252817
When working with tokens, it is often the case that one has instructions
which consume a token and produce a new token. Currently, we have no
mechanism to represent an initial token state.
Instead, we can create a notional "empty token" by inventing a new
constant which captures the semantics we would like. This new constant
is called ConstantTokenNone and is written textually as "token none".
Differential Revision: http://reviews.llvm.org/D14581
llvm-svn: 252811
The discriminators pass relied on the presence of llvm.dbg.cu to decide
whether to add discriminators, but this fails in the case where debug
info is only enabled partially when -fprofile-sample-use is active.
The reason llvm.dbg.cu is not present in these cases is to prevent
codegen from emitting debug info (as it is only used for the sample
profile pass).
This changes the discriminators pass to also emit discriminators even
when debug info is not being emitted.
llvm-svn: 252763
Measurements primarily on AArch64 have shown this feature does not
significantly effect compile-time. The are no significant perf changes in LNT,
but for AArch64 at least, there are wins in third party benchmarks.
As discussed on llvm-dev, we're going to try turning this on by default and see
how other targets react to the change.
llvm-svn: 252733
This is fix for PR24059.
When we are hoisting instruction above some condition it may turn out
that metadata on this instruction was control dependant on the condition.
This metadata becomes invalid and we need to drop it.
This patch should cover most obvious places of speculative execution (which
I have found by greping isSafeToSpeculativelyExecute). I think there are more
cases but at least this change covers the severe ones.
Differential Revision: http://reviews.llvm.org/D14398
llvm-svn: 252604
This patch makes ASAN for aarch64 use the same shadow offset for all
currently supported VMAs (39 and 42 bits). The shadow offset is the
same for 39-bit (36). Similar to ppc64 port, aarch64 transformation
also requires to use an add instead of 'or' for 42-bit VMA.
llvm-svn: 252495
Summary: Call instructions that are from the same line and same basic block needs to have separate discriminators to distinguish between different callsites.
Reviewers: davidxl, dnovillo, dblaikie
Subscribers: dblaikie, probinson, llvm-commits
Differential Revision: http://reviews.llvm.org/D14464
llvm-svn: 252492
When GlobalOpt splits an internal, global variable with an aggregate type, it
should propagate the externally_initialized flag to the newly created globals.
This makes the pass safe for our downstream use of this flag, while still
allowing some useful optimisations (such as removing dead parts of the split
aggregate) to be performed.
Differential Revision: http://reviews.llvm.org/D13382
llvm-svn: 252490
Implemented as many of Michael's suggestions as were possible:
* clang-format the added code while it is still fresh.
* tried to change Value* to Instruction* in many places in computeMinimumValueSizes - unfortunately there are several places where Constants need to be handled so this wasn't possible.
* Reduce the pass list on loop-vectorization-factors.ll.
* Fix a bug where we were querying MinBWs for I->getOperand(0) but using MinBWs[I].
llvm-svn: 252469
Summary:
LAA currently generates a set of SCEV predicates that must be checked by users.
In the case of Loop Distribute/Loop Load Elimination, no such predicates could have
been emitted, since we don't allow stride versioning. However, in the future there
could be SCEV predicates that will need to be checked.
This change adds support for SCEV predicate versioning in the Loop Distribute, Loop
Load Eliminate and the loop versioning infrastructure.
Reviewers: anemet
Subscribers: mssimpso, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14240
llvm-svn: 252467
Summary:
Teach the FunctionAttrs to do the right thing for IR with operand
bundles.
Reviewers: reames, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14408
llvm-svn: 252387
Summary:
This change fixes an iterator wraparound bug in
`determinePointerReadAttrs`.
Ideally, ++'ing off the `end()` of an iplist should result in a failed
assert, but currently iplist seems to silently wrap to the head of the
list on `end()++`. This is why the bad behavior is difficult to
demonstrate.
Reviewers: chandlerc, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14350
llvm-svn: 252386
FoldPHIArgZextsIntoPHI cannot insert an instruction after the PHI if
there is an EHPad in the BB. Doing so would result in an instruction
inserted after a terminator.
llvm-svn: 252377
Some implicit ilist iterator conversions have crept back into Analysis,
Transforms, Hexagon, and llvm-stress. This removes them.
I'll commit a patch immediately after this to disallow them (in a
separate patch so that it's easy to revert if necessary).
llvm-svn: 252371
We tried to insert a cast of a phi in a block whose terminator is an
EHPad. This is invalid. Do not attempt the transform in these
circumstances.
llvm-svn: 252370
This marker prevents optimization passes from adding 'tail' or
'musttail' markers to a call. Is is used to prevent tail call
optimization from being performed on the call.
rdar://problem/22667622
Differential Revision: http://reviews.llvm.org/D12923
llvm-svn: 252368
The SLPVectorizer had a very crude way of trying to benefit
from associativity: it tried to optimize for splat/broadcast
or in order to have the same operator on the same side.
This is benefitial to the cost model and allows more vectorization
to occur.
This patch improve the logic and make the detection optimal (locally,
we don't look at the full tree but only at the immediate children).
Should fix https://llvm.org/bugs/show_bug.cgi?id=25247
Reviewers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D13996
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 252337
Summary:
This change makes the `isImpliedCondition` interface similar to the rest
of the functions in ValueTracking (in that it takes a DataLayout,
AssumptionCache etc.). This is an NFC, intended to make a later diff
less noisy.
Depends on D14369
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14391
llvm-svn: 252333
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
llvm-svn: 252219
inalloca variables were not treated as static allocas, therefore didn't
participate in regular stack instrumentation. We don't want them to
participate in dynamic alloca instrumentation as well.
llvm-svn: 252213
We were correctly skipping dbginfo intrinsics and terminators, but the initial bailout wasn't, causing it to bail out on almost any block.
llvm-svn: 252152
Summary:
Remove the loop over the uses of the CallSite in ArgumentUsesTracker.
Since we have the `Use *` for actual argument operand, we can just use
pointer subtraction.
The time complexity remains the same though (except for a vararg
argument) -- `std::advance` is O(UseIndex) for the ArgumentList
iterator.
The real motivation is to make a later change adding support for operand
bundles simpler.
Reviewers: reames, chandlerc, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14363
llvm-svn: 252141
With this change, instrumentation code and reader/write
code related to profile data structs are kept strictly
in-sync. THis will be extended to cfe and compile-rt
references as well.
Differential Revision: http://reviews.llvm.org/D13843
llvm-svn: 252113
We can often end up with conditional stores that cannot be speculated. They can come from fairly simple, idiomatic code:
if (c & flag1)
*a = x;
if (c & flag2)
*a = y;
...
There is no dominating or post-dominating store to a, so it is not legal to move the store unconditionally to the end of the sequence and cache the intermediate result in a register, as we would like to.
It is, however, legal to merge the stores together and do the store once:
tmp = undef;
if (c & flag1)
tmp = x;
if (c & flag2)
tmp = y;
if (c & flag1 || c & flag2)
*a = tmp;
The real power in this optimization is that it allows arbitrary length ladders such as these to be completely and trivially if-converted. The typical code I'd expect this to trigger on often uses binary-AND with constants as the condition (as in the above example), which means the ending condition can simply be truncated into a single binary-AND too: 'if (c & (flag1|flag2))'. As in the general case there are bitwise operators here, the ladder can often be optimized further too.
This optimization involves potentially increasing register pressure. Even in the simplest case, the lifetime of the first predicate is extended. This can be elided in some cases such as using binary-AND on constants, but not in the general case. Threading 'tmp' through all branches can also increase register pressure.
The optimization as in this patch is enabled by default but kept in a very conservative mode. It will only optimize if it thinks the resultant code should be if-convertable, and additionally if it can thread 'tmp' through at least one existing PHI, so it will only ever in the worst case create one more PHI and extend the lifetime of a predicate.
This doesn't trigger much in LNT, unfortunately, but it does trigger in a big way in a third party test suite.
llvm-svn: 252051
In my previous change to CVP (251606), I made CVP much more aggressive about trying to constant fold comparisons. This patch is a reversal in direction. Rather than being agressive about every compare, we restore the non-block local restriction for most, and then try hard for compares feeding returns.
The motivation for this is two fold:
* The more I thought about it, the less comfortable I got with the possible compile time impact of the other approach. There have been no reported issues, but after talking to a couple of folks, I've come to the conclusion the time probably isn't justified.
* It turns out we need to know the context to leverage the full power of LVI. In particular, asking about something at the end of it's block (the use of a compare in a return) will frequently get more precise results than something in the middle of a block. This is an implementation detail, but it's also hard to get around since mid-block queries have to reason about possible throwing instructions and don't get to use most of LVI's block focused infrastructure. This will become particular important when combined with http://reviews.llvm.org/D14263.
Differential Revision: http://reviews.llvm.org/D14271
llvm-svn: 252032
Summary:
The goal of this pass is to perform store-to-load forwarding across the
backedge of a loop. E.g.:
for (i)
A[i + 1] = A[i] + B[i]
=>
T = A[0]
for (i)
T = T + B[i]
A[i + 1] = T
The pass relies on loop dependence analysis via LoopAccessAnalisys to
find opportunities of loop-carried dependences with a distance of one
between a store and a load. Since it's using LoopAccessAnalysis, it was
easy to also add support for versioning away may-aliasing intervening
stores that would otherwise prevent this transformation.
This optimization is also performed by Load-PRE in GVN without the
option of multi-versioning. As was discussed with Daniel Berlin in
http://reviews.llvm.org/D9548, this is inferior to a more loop-aware
solution applied here. Hopefully, we will be able to remove some
complexity from GVN/MemorySSA as a consequence.
In the long run, we may want to extend this pass (or create a new one if
there is little overlap) to also eliminate loop-indepedent redundant
loads and store that *require* versioning due to may-aliasing
intervening stores/loads. I have some motivating cases for store
elimination. My plan right now is to wait for MemorySSA to come online
first rather than using memdep for this.
The main motiviation for this pass is the 456.hmmer loop in SPECint2006
where after distributing the original loop and vectorizing the top part,
we are left with the critical path exposed in the bottom loop. Being
able to promote the memory dependence into a register depedence (even
though the HW does perform store-to-load fowarding as well) results in a
major gain (~20%). This gain also transfers over to x86: it's
around 8-10%.
Right now the pass is off by default and can be enabled
with -enable-loop-load-elim. On the LNT testsuite, there are two
performance changes (negative number -> improvement):
1. -28% in Polybench/linear-algebra/solvers/dynprog: the length of the
critical paths is reduced
2. +2% in Polybench/stencils/adi: Unfortunately, I couldn't reproduce this
outside of LNT
The pass is scheduled after the loop vectorizer (which is after loop
distribution). The rational is to try to reuse LAA state, rather than
recomputing it. The order between LV and LLE is not critical because
normally LV does not touch scalar st->ld forwarding cases where
vectorizing would inhibit the CPU's st->ld forwarding to kick in.
LoopLoadElimination requires LAA to provide the full set of dependences
(including forward dependences). LAA is known to omit loop-independent
dependences in certain situations. The big comment before
removeDependencesFromMultipleStores explains why this should not occur
for the cases that we're interested in.
Reviewers: dberlin, hfinkel
Subscribers: junbuml, dberlin, mssimpso, rengolin, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13259
llvm-svn: 252017
Summary:
We now collect all types of dependences including lexically forward
deps not just "interesting" ones.
Reviewers: hfinkel
Subscribers: rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13256
llvm-svn: 251985
Commit 251839 triggers miscompiles on some bots:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly-fast/builds/13723
(The commit is listed in 13722, but due to an existing failure introduced in
13721 and reverted in 13723 the failure is only visible in 13723)
To verify r251839 is indeed the only change that triggered the buildbot failures
and to ensure the buildbots remain green while investigating I temporarily
revert this commit. At the current state it is unclear if this commit introduced
some miscompile or if it only exposed code to Polly that is subsequently
miscompiled by Polly.
llvm-svn: 251901
To be able to maximize the bandwidth during vectorization, this patch provides a new flag vectorizer-maximize-bandwidth. When it is turned on, the vectorizer will determine the vectorization factor (VF) using the smallest instead of widest type in the loop. To avoid increasing register pressure too much, estimates of the register usage for different VFs are calculated so that we only choose a VF when its register usage doesn't exceed the number of available registers.
This is the second attempt to submit this patch. The first attempt got a test failure on ARM. This patch is updated to try to fix the failure (more specifically, by handling the case when VF=1).
Differential revision: http://reviews.llvm.org/D8943
llvm-svn: 251850
This reverts commit r251837, due to a number of bot failures of the form:
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to
'llvm::object::FunctionIndexObjectFile::create(llvm::MemoryBufferRef,
llvm::LLVMContext&, llvm::Module const*, bool)'
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to 'llvm::object::FunctionIndexObjectFile::takeIndex()'
I'm not sure why these are happening - I added Object to the requred
libraries in tools/llvm-link/LLVMBuild.txt and the LLVM_LINK_COMPONENTS
in tools/llvm-link/CMakeLists.txt. Confirmed for my build that these
symbols come out of libLLVMObject.a. What am I missing?
llvm-svn: 251841
Summary:
This patch adds support to check if a loop has loop invariant conditions which lead to loop exits. If so, we know that if the exit path is taken, it is at the first loop iteration. If there is an induction variable used in that exit path whose value has not been updated, it will keep its initial value passing from loop preheader. We can therefore rewrite the exit value with
its initial value. This will help remove phis created by LCSSA and enable other optimizations like loop unswitch.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13974
llvm-svn: 251839
Summary:
Support for necessary linkage changes and symbol renaming during
ThinLTO function importing.
Also includes llvm-link support for manually importing functions
and associated llvm-link based tests.
Note that this does not include support for intelligently importing
metadata, which is currently imported duplicate times. That support will
be in the follow-on patch, and currently is ignored by the tests.
Reviewers: dexonsmith, joker.eph, davidxl
Subscribers: tobiasvk, tejohnson, llvm-commits
Differential Revision: http://reviews.llvm.org/D13515
llvm-svn: 251837
Summary:
SCEV Predicates represent conditions that typically cannot be derived from
static analysis, but can be used to reduce SCEV expressions to forms which are
usable for different optimizers.
ScalarEvolution now has the rewriteUsingPredicate method which can simplify a
SCEV expression using a SCEVPredicateSet. The normal workflow of a pass using
SCEVPredicates would be to hold a SCEVPredicateSet and every time assumptions
need to be made a new SCEV Predicate would be created and added to the set.
Each time after calling getSCEV, the user will call the rewriteUsingPredicate
method.
We add two types of predicates
SCEVPredicateSet - implements a set of predicates
SCEVEqualPredicate - tests for equality between two SCEV expressions
We use the SCEVEqualPredicate to re-implement stride versioning. Every time we
version a stride, we will add a SCEVEqualPredicate to the context.
Instead of adding specific stride checks, LoopVectorize now adds a more
generic SCEV check.
We only need to add support for this in the LoopVectorizer since this is the
only pass that will do stride versioning.
Reviewers: mzolotukhin, anemet, hfinkel, sanjoy
Subscribers: sanjoy, hfinkel, rengolin, jmolloy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13595
llvm-svn: 251800
The initial coverage checking code for sample records failed to count
records inside inlined profiles. This change fixes the oversight.
llvm-svn: 251752
from its pass harness by providing a lambda to query for AA results.
This allows the legacy pass to easily provide a lambda that uses the
special helpers to construct function AA results from a legacy CGSCC
pass. With the new pass manager (the next patch) the lambda just
directly wraps the intuitive query API.
llvm-svn: 251715
Update the discriminator assignment algorithm
* If a scope has already been assigned a discriminator, do not reassign a nested discriminator for it.
* If the file and line both match, even if the column does not match, we should assign a new discriminator for the stmt.
original code:
; #1 int foo(int i) {
; #2 if (i == 3 || i == 5) return 100; else return 99;
; #3 }
; i == 3: discriminator 0
; i == 5: discriminator 2
; return 100: discriminator 1
; return 99: discriminator 3
llvm-svn: 251689
Update the discriminator assignment algorithm
* If a scope has already been assigned a discriminator, do not reassign a nested discriminator for it.
* If the file and line both match, even if the column does not match, we should assign a new discriminator for the stmt.
original code:
; #1 int foo(int i) {
; #2 if (i == 3 || i == 5) return 100; else return 99;
; #3 }
; i == 3: discriminator 0
; i == 5: discriminator 2
; return 100: discriminator 1
; return 99: discriminator 3
llvm-svn: 251685
* If a scope has already been assigned a discriminator, do not reassign a nested discriminator for it.
* If the file and line both match, even if the column does not match, we should assign a new discriminator for the stmt.
original code:
; #1 int foo(int i) {
; #2 if (i == 3 || i == 5) return 100; else return 99;
; #3 }
; i == 3: discriminator 0
; i == 5: discriminator 2
; return 100: discriminator 1
; return 99: discriminator 3
llvm-svn: 251680
transformations in FunctionAttrs rather than building a new one each
time.
This isn't trivial because there are different heuristics from different
passes for exactly what set they want. The primary difference is whether
an *overridable* function completely disables the synthesis of
attributes. I've modeled this by directly testing for overridable, and
using the common set that excludes external and opt-none functions.
This does cause some changes by disabling more optimizations in the face
of opt-none. Specifically, we were still optimizing *calls* to opt-none
functions based on their attributes, just not the bodies. It seems
better to be conservative on both fronts given the intended semanticas
here (best effort to not assume or disturb anything). I've not tried to
test this change as it seems complex, brittle, and not important to the
implicit contract of opt-none. Instead, it seems more like a choice that
should be dictated by the simplified implementation and the change to be
acceptable differences within the space of opt-none.
A big benefit here is that these transformations no longer rely on the
legacy pass manager's SCC types, they just work on generic sets of
function pointers. This will make it easy to re-use their logic in the
new pass manager.
I've also made the transforms static functions instead of members where
trivial while I was touching the signatures.
llvm-svn: 251640
This patch unify the 39-bit and 42-bit mapping for aarch64 to use only
one instrumentation algorithm. This removes compiler flag
SANITIZER_AARCH64_VMA requirement for MSAN on aarch64.
The mapping to use now is for 39 and 42-bits:
0x00000000000ULL-0x01000000000ULL MappingDesc::INVALID
0x01000000000ULL-0x02000000000ULL MappingDesc::SHADOW
0x02000000000ULL-0x03000000000ULL MappingDesc::ORIGIN
0x03000000000ULL-0x04000000000ULL MappingDesc::SHADOW
0x04000000000ULL-0x05000000000ULL MappingDesc::ORIGIN
0x05000000000ULL-0x06000000000ULL MappingDesc::APP
0x06000000000ULL-0x07000000000ULL MappingDesc::INVALID
0x07000000000ULL-0x08000000000ULL MappingDesc::APP
And only for 42-bits:
0x08000000000ULL-0x09000000000ULL MappingDesc::INVALID
0x09000000000ULL-0x0A000000000ULL MappingDesc::SHADOW
0x0A000000000ULL-0x0B000000000ULL MappingDesc::ORIGIN
0x0B000000000ULL-0x0F000000000ULL MappingDesc::INVALID
0x0F000000000ULL-0x10000000000ULL MappingDesc::APP
0x10000000000ULL-0x11000000000ULL MappingDesc::INVALID
0x11000000000ULL-0x12000000000ULL MappingDesc::APP
0x12000000000ULL-0x17000000000ULL MappingDesc::INVALID
0x17000000000ULL-0x18000000000ULL MappingDesc::SHADOW
0x18000000000ULL-0x19000000000ULL MappingDesc::ORIGIN
0x19000000000ULL-0x20000000000ULL MappingDesc::INVALID
0x20000000000ULL-0x21000000000ULL MappingDesc::APP
0x21000000000ULL-0x26000000000ULL MappingDesc::INVALID
0x26000000000ULL-0x27000000000ULL MappingDesc::SHADOW
0x27000000000ULL-0x28000000000ULL MappingDesc::ORIGIN
0x28000000000ULL-0x29000000000ULL MappingDesc::SHADOW
0x29000000000ULL-0x2A000000000ULL MappingDesc::ORIGIN
0x2A000000000ULL-0x2B000000000ULL MappingDesc::APP
0x2B000000000ULL-0x2C000000000ULL MappingDesc::INVALID
0x2C000000000ULL-0x2D000000000ULL MappingDesc::SHADOW
0x2D000000000ULL-0x2E000000000ULL MappingDesc::ORIGIN
0x2E000000000ULL-0x2F000000000ULL MappingDesc::APP
0x2F000000000ULL-0x39000000000ULL MappingDesc::INVALID
0x39000000000ULL-0x3A000000000ULL MappingDesc::SHADOW
0x3A000000000ULL-0x3B000000000ULL MappingDesc::ORIGIN
0x3B000000000ULL-0x3C000000000ULL MappingDesc::APP
0x3C000000000ULL-0x3D000000000ULL MappingDesc::INVALID
0x3D000000000ULL-0x3E000000000ULL MappingDesc::SHADOW
0x3E000000000ULL-0x3F000000000ULL MappingDesc::ORIGIN
0x3F000000000ULL-0x40000000000ULL MappingDesc::APP
And although complex it provides a better memory utilization that
previous one.
llvm-svn: 251624
Clang driver now injects -u<hook_var> flag in the linker
command line, in which case user function is not needed
any more.
Differential Revision: http://reviews.llvm.org/D14033
llvm-svn: 251612
Somewhat shockingly for an analysis pass which is computing constant ranges, LVI did not understand the ranges provided by range metadata.
As part of this change, I included a change to CVP primarily because doing so made it much easier to write small self contained test cases. CVP was previously only handling the non-local operand case, but given that LVI can sometimes figure out information about instructions standalone, I don't see any reason to restrict this. There could possibly be a compile time impact from this, but I suspect it should be minimal. If anyone has an example which substaintially regresses, please let me know. I could restrict the block local handling to ICmps feeding Terminator instructions if needed.
Note that this patch continues a somewhat bad practice in LVI. In many cases, we know facts about values, and separate context sensitive facts about values. LVI makes no effort to distinguish and will frequently cache the same value fact repeatedly for different contexts. I would like to change this, but that's a large enough change that I want it to go in separately with clear documentation of what's changing. Other examples of this include the non-null handling, and arguments.
As a meta comment: the entire motivation of this change was being able to write smaller (aka reasonable sized) test cases for a future patch teaching LVI about select instructions.
Differential Revision: http://reviews.llvm.org/D13543
llvm-svn: 251606
The most common use case is when eliminating redundant range checks in an example like the following:
c = a[i+1] + a[i];
Note that all the smarts of the transform (the implication engine) is already in ValueTracking and is tested directly through InstructionSimplify.
Differential Revision: http://reviews.llvm.org/D13040
llvm-svn: 251596
To be able to maximize the bandwidth during vectorization, this patch provides a new flag vectorizer-maximize-bandwidth. When it is turned on, the vectorizer will determine the vectorization factor (VF) using the smallest instead of widest type in the loop. To avoid increasing register pressure too much, estimates of the register usage for different VFs are calculated so that we only choose a VF when its register usage doesn't exceed the number of available registers.
llvm-svn: 251592
This adds the flag -mllvm -sample-profile-check-coverage=N to the
SampleProfile pass. N is the percent of input sample records that the
user expects to apply. If the pass does not use N% (or more) of the
sample records in the input, it emits a warning.
This is useful to detect some forms of stale profiles. If the code has
drifted enough from the original profile, there will be records that do
not match the IR anymore.
This will not detect cases where a sample profile record for line L is
referring to some other instructions that also used to be at line L.
llvm-svn: 251568
Summary:
If P branches to Q conditional on C and Q branches to R conditional on
C' and C => C' then the branch conditional on C' can be folded to an
unconditional branch.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13972
llvm-svn: 251557
The pass was keeping around a lot of per-function data (visited blocks,
edges, dominance, etc) that is just taking up memory for no reason. In
fact, from function to function it could potentially confuse the
propagator since some maps are indexed by line offsets which can be
common between functions.
llvm-svn: 251531
I think these were affected by a change way back when to stop printing newlines in Value::dump() by default. This change simply allows the debug output to be readable.
NFC.
llvm-svn: 251517
Summary:
This patch adds support to check if a loop has loop invariant conditions which lead to loop exits. If so, we know that if the exit path is taken, it is at the first loop iteration. If there is an induction variable used in that exit path whose value has not been updated, it will keep its initial value passing from loop preheader. We can therefore rewrite the exit value with
its initial value. This will help remove phis created by LCSSA and enable other optimizations like loop unswitch.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13974
llvm-svn: 251492
CatchReturnInst has side-effects: it runs a destructor. This destructor
could conceivably run forever/call exit/etc. and should not be removed.
llvm-svn: 251461
Summary:
This change could be way off-piste, I'm looking for any feedback on whether it's an acceptable approach.
It never seems to be a problem to gobble up as many reduction values as can be found, and then to attempt to reduce the resulting tree. Some of the workloads I'm looking at have been aggressively unrolled by hand, and by selecting reduction widths that are not constrained by a vector register size, it becomes possible to profitably vectorize. My test case shows such an unrolling which SLP was not vectorizing (on neither ARM nor X86) before this patch, but with it does vectorize.
I measure no significant compile time impact of this change when combined with D13949 and D14063. There are also no significant performance regressions on ARM/AArch64 in SPEC or LNT.
The more principled approach I thought of was to generate several candidate tree's and use the cost model to pick the cheapest one. That seemed like quite a big design change (the algorithms seem very much one-shot), and would likely be a costly thing for compile time. This seemed to do the job at very little cost, but I'm worried I've misunderstood something!
Reviewers: nadav, jmolloy
Subscribers: mssimpso, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D14116
llvm-svn: 251428
Summary:
Currently, when the SLP vectorizer considers whether a phi is part of a reduction, it dismisses phi's whose incoming blocks are not the same as the block containing the phi. For the patterns I'm looking at, extending this rule to allow phis whose incoming block is a containing loop latch allows me to vectorize certain workloads.
There is no significant compile-time impact, and combined with D13949, no performance improvement measured in ARM/AArch64 in any of SPEC2000, SPEC2006 or LNT.
Reviewers: jmolloy, mcrosier, nadav
Subscribers: mssimpso, nadav, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D14063
llvm-svn: 251425
Summary:
Certain workloads, in particular sum-of-absdiff loops, can be vectorized using SLP if it can treat select instructions as reduction values.
The test case is a bit awkward. The AArch64 cost model needs some tuning to not be so pessimistic about selects. I've had to tweak the SLP threshold here.
Reviewers: jmolloy, mzolotukhin, spatel, nadav
Subscribers: nadav, mssimpso, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D13949
llvm-svn: 251424
When emitting a remark for a conditional branch annotation, the remark
uses the line location information of the conditional branch in the
message. In some cases, that information is unavailable and the
optimization would segfaul. I'm still not sure whether this is a bug or
WAI, but the optimizer should not die because of this.
llvm-svn: 251420
No functionality changed here, but the indentation is substantially
reduced and IMO the code is much easier to read. I've also added some
helpful comments.
This is just a clean-up I wrote while studying the code, and that has
been in my backlog for a while.
llvm-svn: 251381
We should remove noalias along with dereference and dereference_or_null attributes
because statepoint could potentially touch the entire heap including noalias objects.
Differential Revision: http://reviews.llvm.org/D14032
llvm-svn: 251333
This adds a couple of optimization remarks to the SamplePGO
transformation. When it decides to inline a hot function (to mimic the
inline stack and repeat useful inline decisions in the original build).
It will also report branch destinations. For instance, given the code
fragment:
6 if (i < 1000)
7 sum -= i;
8 else
9 sum += -i * rand();
If the 'else' branch is taken most of the time, building this code with
-Rpass=sample-profile will produce:
a.cc:9:14: remark: most popular destination for conditional branches at small.cc:6:9 [-Rpass=sample-profile]
sum += -i * rand();
^
llvm-svn: 251330
Android libc provides a fixed TLS slot for the unsafe stack pointer,
and this change implements direct access to that slot on AArch64 via
__builtin_thread_pointer() + offset.
This change also moves more code into TargetLowering and its
target-specific subclasses to get rid of target-specific codegen
in SafeStackPass.
This change does not touch the ARM backend because ARM lowers
builting_thread_pointer as aeabi_read_tp, which is not available
on Android.
The previous iteration of this change was reverted in r250461. This
version leaves the generic, compiler-rt based implementation in
SafeStack.cpp instead of moving it to TargetLoweringBase in order to
allow testing without a TargetMachine.
llvm-svn: 251324
Vectorization of memory instruction (Load/Store) is possible when the pointer is coming from GEP. The GEP analysis allows to estimate the profit.
In some cases we have a "bitcast" between GEP and memory instruction.
I added code that skips the "bitcast".
http://reviews.llvm.org/D13886
llvm-svn: 251291
Summary:
InstCombine tries to transform GEP(PHI(GEP1, GEP2, ..)) into GEP(GEP(PHI(...))
when possible. However, this may leave the old PHI node around. Even if we
do end up folding the GEPs, having an extra PHI node might not be beneficial.
This change makes the transformation more conservative. We now only do this if
the PHI has only one use, and can therefore be removed after the transformation.
Reviewers: jmolloy, majnemer
Subscribers: mcrosier, mssimpso, llvm-commits
Differential Revision: http://reviews.llvm.org/D13887
llvm-svn: 251281
First, the motivation: LLVM currently does not realize that:
((2072 >> (L == 0)) >> 7) & 1 == 0
where L is some arbitrary value. Whether you right-shift 2072 by 7 or by 8, the
lowest-order bit is always zero. There are obviously several ways to go about
fixing this, but the generic solution pursued in this patch is to teach
computeKnownBits something about shifts by a non-constant amount. Previously,
we would give up completely on these. Instead, in cases where we know something
about the low-order bits of the shift-amount operand, we can combine (and
together) the associated restrictions for all shift amounts consistent with
that knowledge. As a further generalization, I refactored all of the logic for
all three kinds of shifts to have this capability. This works well in the above
case, for example, because the dynamic shift amount can only be 0 or 1, and
thus we can say a lot about the known bits of the result.
This brings us to the second part of this change: Even when we know all of the
bits of a value via computeKnownBits, nothing used to constant-fold the result.
This introduces the necessary code into InstCombine and InstSimplify. I've
added it into both because:
1. InstCombine won't automatically pick up the associated logic in
InstSimplify (InstCombine uses InstSimplify, but not via the API that
passes in the original instruction).
2. Putting the logic in InstCombine allows the resulting simplifications to become
part of the iterative worklist
3. Putting the logic in InstSimplify allows the resulting simplifications to be
used by everywhere else that calls SimplifyInstruction (inlining, unrolling,
and many others).
And this requires a small change to our definition of an ephemeral value so
that we don't break the rest case from r246696 (where the icmp feeding the
@llvm.assume, is also feeding a br). Under the old definition, the icmp would
not be considered ephemeral (because it is used by the br), but this causes the
assume to remove itself (in addition to simplifying the branch structure), and
it seems more-useful to prevent that from happening.
llvm-svn: 251146
After some look-ahead PRE was added for GEPs, an instruction could end
up in the table of candidates before it was actually inspected. When
this happened the pass might decide it was the best candidate to
replace itself. This didn't go well.
Should fix PR25291
llvm-svn: 251145
Summary:
This change teaches the LLVM inliner to not inline through callsites
with unknown operand bundles. Currently all operand bundles are
"unknown" operand bundles but in the near future we will add support for
inlining through some select kinds of operand bundles.
Reviewers: reames, chandlerc, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14001
llvm-svn: 251141
This patch converts the remaining references to literal
strings for names of profile runtime entites (such as
profile runtime hook, runtime hook use function, profile
init method, register function etc).
Also added documentation for all the new interfaces.
llvm-svn: 251093
The insertLoop() API is only used to add new loops, and has confusing
ownership semantics. Simplify it by replacing it with addLoop().
llvm-svn: 251064
Summary: Currently SimplifyResume can convert an invoke instruction to a call instruction if its landing pad is trivial. In practice we could have several invoke instructions with trivial landing pads and share a common rethrow block, and in the common rethrow block, all the landing pads join to a phi node. The patch extends SimplifyResume to check the phi of landing pad and their incoming blocks. If any of them is trivial, remove it from the phi node and convert the invoke instruction to a call instruction.
Reviewers: hfinkel, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13718
llvm-svn: 251061
This is a clean up patch that defines instr prof section and variable
name prefixes in a common header with access helper functions.
clang FE change will be done as a follow up once this patch is in.
Differential Revision: http://reviews.llvm.org/D13919
llvm-svn: 251058
As an invariant, BasicBlocks cannot be empty when passed to a transform.
This is not the case for MachineBasicBlocks and the Sink pass was ported
from the MachineSink pass which would explain the check's existence.
llvm-svn: 251057
* Don't instrument promotable dynamic allocas:
We already have a test that checks that promotable dynamic allocas are
ignored, as well as static promotable allocas. Make sure this test will
still pass if/when we enable dynamic alloca instrumentation by default.
* Handle lifetime intrinsics before handling dynamic allocas:
lifetime intrinsics may refer to dynamic allocas, so we need to emit
instrumentation before these dynamic allocas would be replaced.
Differential Revision: http://reviews.llvm.org/D12704
llvm-svn: 251045
SimplifyTerminatorOnSelect didn't consider the possibility that the
condition might be related to one of PHI nodes.
This fixes PR25267.
llvm-svn: 250922
In some cases (as illustrated in the unittest), lineno can be less than the heade_lineno because the function body are included from some other files. In this case, offset will be negative. This patch makes clang still able to match the profile to IR in this situation.
http://reviews.llvm.org/D13914
llvm-svn: 250873
It is now possible to infer intrinsic modref behaviour purely from intrinsic attributes.
This change will allow to completely remove GET_INTRINSIC_MODREF_BEHAVIOR table.
Differential Revision: http://reviews.llvm.org/D13907
llvm-svn: 250860
Summary: In r231241, TargetLibraryInfoWrapperPass was added to
`getAnalysisUsage` for `AddressSanitizer`, but the corresponding
`INITIALIZE_PASS_DEPENDENCY` was not added.
Reviewers: dvyukov, chandlerc, kcc
Subscribers: kcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D13629
llvm-svn: 250813
`normalizeForInvokeSafepoint` in RewriteStatepointsForGC.cpp, as it is
written today, deals with `gc.relocate` and `gc.result` uses of a
statepoint equally well. This change documents this fact and adds a
test case.
There is no functional change here -- only documentation of existing
functionality.
llvm-svn: 250784
Allow LLVM to optimize the sequence like the following:
%inc = add nsw i32 %i, 1
%cmp = icmp slt %n, %inc
into:
%cmp = icmp sle i32 %n, %i
The case is not handled previously due to the complexity of compuation of %n.
Hence, LLVM cannot swap operands of icmp accordingly.
llvm-svn: 250746
Besides the usual, I finally added an overload to
`BasicBlock::splitBasicBlock()` that accepts an `Instruction*` instead
of `BasicBlock::iterator`. Someone can go back and remove this overload
later (after updating the callers I'm going to skip going forward), but
the most common call seems to be
`BB->splitBasicBlock(BB->getTerminator(), ...)` and I'm not sure it's
better to add `->getIterator()` to every one than have the overload.
It's pretty hard to get the usage wrong.
llvm-svn: 250745
Originally I planned to use the same interface for masked gather/scatter and set isConsecutive to "false" in this case.
Now I'm implementing masked gather/scatter and see that the interface is inconvenient. I want to add interfaces isLegalMaskedGather() / isLegalMaskedScatter() instead of using the "Consecutive" parameter in the existing interfaces.
Differential Revision: http://reviews.llvm.org/D13850
llvm-svn: 250686
This patch improves support for combining the SSE4A EXTRQ(I) and INSERTQ(I) intrinsics:
1 - Converts INSERTQ/EXTRQ calls to INSERTQI/EXTRQI if the 'bit index' and 'length' operands are constant
2 - Converts INSERTQI/EXTRQI calls to shufflevector if the bit index/length are both byte aligned (we can already lower shuffles to INSERTQI/EXTRQI if its useful)
3 - Constant folding support
4 - Add zeroinitializer handling
Differential Revision: http://reviews.llvm.org/D13348
llvm-svn: 250609
The `"statepoint-id"` and `"statepoint-num-patch-bytes"` attributes are
used solely to determine properties of the `gc.statepoint` being
created. Once the `gc.statepoint` is in place, these should be removed.
llvm-svn: 250491
Summary:
This is a step towards using operand bundles to carry deopt state till
RewriteStatepointsForGC. The change adds a flag to
RewriteStatepointsForGC that teaches it to pick up deopt state from a
`"deopt"` operand bundle attached to the `call` or `invoke` it is
wrapping.
The command line flag added, `-rs4gc-use-deopt-bundles`, will only exist
for a short while. Once we are able to pipe deopt bundle state through
the full optimization pipeline without problems, we will "constant fold"
`-rs4gc-use-deopt-bundles` to `true`.
Reviewers: swaroop.sridhar, reames
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D13372
llvm-svn: 250489
Summary:
`cloneArithmeticIVUser` currently trips over expression like `add %iv,
-1` when `%iv` is being zero extended -- it tries to construct the
widened use as `add %iv.zext, zext(-1)` and (correctly) fails to prove
equivalence to `zext(add %iv, -1)` (here the SCEV for `%iv` is
`{1,+,1}`).
This change teaches `IndVars` to try sign extending the non-IV operand
if that makes the newly constructed IV use equivalent to the widened
narrow IV use.
Reviewers: atrick, hfinkel, reames
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13717
llvm-svn: 250483
Summary:
This NFC splitting is intended to make a later diff easier to follow.
It just tail duplicates `cloneIVUser` into `cloneArithmeticIVUser` and
`cloneBitwiseIVUser`.
Reviewers: atrick, hfinkel, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13716
llvm-svn: 250481
Android libc provides a fixed TLS slot for the unsafe stack pointer,
and this change implements direct access to that slot on AArch64 via
__builtin_thread_pointer() + offset.
This change also moves more code into TargetLowering and its
target-specific subclasses to get rid of target-specific codegen
in SafeStackPass.
This change does not touch the ARM backend because ARM lowers
builting_thread_pointer as aeabi_read_tp, which is not available
on Android.
llvm-svn: 250456
Turns out this approach is buggy. In discussion about follow on work, Sanjoy pointed out that we could be subject to circular logic problems.
Consider:
if (i u< L) leave()
if ((i + 1) u< L) leave()
print(a[i] + a[i+1])
If we know that L is less than UINT_MAX, we could possible prove (in a control dependent way) that i + 1 does not overflow. This gives us:
if (i u< L) leave()
if ((i +nuw 1) u< L) leave()
print(a[i] + a[i+1])
If we now do the transform this patch proposed, we end up with:
if ((i +nuw 1) u< L) leave_appropriately()
print(a[i] + a[i+1])
That would be a miscompile when i==-1. The problem here is that the control dependent nuw bits got used to prove something about the first condition. That's obviously invalid.
This won't happen today, but since I plan to enhance LVI/CVP with exactly that transform at some point in the not too distant future...
llvm-svn: 250430
This adjusts all integers in the reader/writer to reflect the types
stored on profile files. They should all be unsigned 32-bit or 64-bit
values. Changed all associated internal types to be uint32_t or
uint64_t.
The only place that needed some adjustments is in the sample profile
transformation. Altough the weight read from the profile are 64-bit
values, the internal API for branch weights only accepts 32-bit values.
The pass now saturates weights that overflow uint32_t.
llvm-svn: 250427
With r250345 and r250343, we start to observe the following failure
when bootstrap clang with lto and pgo:
PHI node entries do not match predecessors!
%.sroa.029.3.i = phi %"class.llvm::SDNode.13298"* [ null, %30953 ], [ null, %31017 ], [ null, %30998 ], [ null, %_ZN4llvm8dyn_castINS_14ConstantSDNodeENS_7SDValueEEENS_10cast_rettyIT_T0_E8ret_typeERS5_.exit.i.1804 ], [ null, %30975 ], [ null, %30991 ], [ null, %_ZNK4llvm3EVT13getScalarTypeEv.exit.i.1812 ], [ %..sroa.029.0.i, %_ZN4llvm11SmallVectorIiLj8EED1Ev.exit.i.1826 ], !dbg !451895
label %30998
label %_ZNK4llvm3EVTeqES0_.exit19.thread.i
LLVM ERROR: Broken function found, compilation aborted!
I will re-commit this if the bot does not recover.
llvm-svn: 250366
Currently in JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB).
This is the third attempt to submit this patch, while the first two led to failures in some FDO tests. After investigation, it is the edge weight normalization that caused those failures. In this patch the edge weight normalization is fixed so that there is no zero weight in the output and the sum of all weights can fit in 32-bit integer. Several unit tests are added.
Differential revision: http://reviews.llvm.org/D10979
llvm-svn: 250345
If we have a series of branches which are all unlikely to fail, we can possibly combine them into a single check on the fastpath combined with a bit of dispatch logic on the slowpath. We don't want to do this unconditionally since it requires speculating instructions past a branch, but if the profiling metadata on the branch indicates profitability, this can reduce the number of checks needed along the fast path.
The canonical example this is trying to handle is removing the second bounds check implied by the Java code: a[i] + a[i+1]. Note that it can currently only do so for really simple conditions and the values of a[i] can't be used anywhere except in the addition. (i.e. the load has to have been sunk already and not prevent speculation.) I plan on extending this transform over the next few days to handle alternate sequences.
Differential Revision: http://reviews.llvm.org/D13070
llvm-svn: 250343
We forgot to append the terminatepad's arguments which resulted in us
treating the old terminatepad as an argument to the new terminatepad
causing us to crash immediately. Instead, add the old terminatepad's
arguments to the new terminatepad.
This fixes PR25155.
llvm-svn: 250234
Remove remaining `ilist_iterator` implicit conversions from
LLVMScalarOpts.
This change exposed some scary behaviour in
lib/Transforms/Scalar/SCCP.cpp around line 1770. This patch changes a
call from `Function::begin()` to `&Function::front()`, since the return
was immediately being passed into another function that takes a
`Function*`. `Function::front()` started to assert, since the function
was empty. Note that `Function::end()` does not point at a legal
`Function*` -- it points at an `ilist_half_node` -- so the other
function was getting garbage before. (I added the missing check for
`Function::isDeclaration()`.)
Otherwise, no functionality change intended.
llvm-svn: 250211
Currently in JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB).
Differential revision: http://reviews.llvm.org/D10979
llvm-svn: 250204
On Linux, the profile runtime can use __start_SECTNAME and __stop_SECTNAME
symbols defined by the linker to locate the start and end location of
a named section (with C name). This eliminates the need for instrumented
binary to call __llvm_profile_register_function during start-up time.
llvm-svn: 250199
As discussed in D13348 - the INSERTQI range combining code is wrong in that it confuses the insertion bit index with an extraction bit index.
The remaining legal combines are very unlikely (especially once we've converted to shuffles in D13348) so I'm removing the optimization.
llvm-svn: 250160
Now that all the known faults with GlobalsAA have been fixed, flip the big switch on -enable-non-lto-gmr again.
Feel free to pester me with any more bugs found, and don't hesitate to flip the switch back off.
llvm-svn: 250157
Continuing the work from last week to remove implicit ilist iterator
conversions. First related commit was probably r249767, with some more
motivation in r249925. This edition gets LLVMTransformUtils compiling
without the implicit conversions.
No functional change intended.
llvm-svn: 250142
In JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB).
Differential revision: http://reviews.llvm.org/D10979
llvm-svn: 250089
GlobalOpt currently merges stores into the initialisers of internal,
externally_initialized globals, but should not do so as the value of the global
may change between the initialiser and any code in the module being run.
llvm-svn: 250035
C semantics force sub-int-sized values (e.g. i8, i16) to be promoted to int
type (e.g. i32) whenever arithmetic is performed on them.
For targets with native i8 or i16 operations, usually InstCombine can shrink
the arithmetic type down again. However InstCombine refuses to create illegal
types, so for targets without i8 or i16 registers, the lengthening and
shrinking remains.
Most SIMD ISAs (e.g. NEON) however support vectors of i8 or i16 even when
their scalar equivalents do not, so during vectorization it is important to
remove these lengthens and truncates when deciding the profitability of
vectorization.
The algorithm this uses starts at truncs and icmps, trawling their use-def
chains until they terminate or instructions outside the loop are found (or
unsafe instructions like inttoptr casts are found). If the use-def chains
starting from different root instructions (truncs/icmps) meet, they are
unioned. The demanded bits of each node in the graph are ORed together to form
an overall mask of the demanded bits in the entire graph. The minimum bitwidth
that graph can be truncated to is the bitwidth minus the number of leading
zeroes in the overall mask.
The intention is that this algorithm should "first do no harm", so it will
never insert extra cast instructions. This is why the use-def graphs are
unioned, so that subgraphs with different minimum bitwidths do not need casts
inserted between them.
This algorithm works hard to reduce compile time impact. DemandedBits are only
queried if there are extends of illegal types and if a truncate to an illegal
type is seen. In the general case, this results in a simple linear scan of the
instructions in the loop.
No non-noise compile time impact was seen on a clang bootstrap build.
llvm-svn: 250032
Doing so could cause the post-unswitching convergent ops to be
control-dependent on the unswitch condition where they were not before.
This check could be refined to allow unswitching where the convergent
operation was already control-dependent on the unswitch condition.
llvm-svn: 249874
This covers the common case of operations that cannot be sunk.
Operations that cannot be hoisted should already be handled properly via
the safe-to-speculate rules and mechanisms.
llvm-svn: 249865
http://reviews.llvm.org/D13576
As we are using hierarchical profile, there is no need to keep HeaderLineno a member variable. This is because each level of the inline stack will have its own header lineno. One should use the head lineno of its own inline stack level instead of the actual symbol.
llvm-svn: 249848
Pass MemCpyOpt doesn't check if a store instruction is nontemporal.
As a consequence, adjacent nontemporal stores are always merged into a
memset call.
Example:
;;;
define void @foo(<4 x float>* nocapture %p) {
entry:
store <4 x float> zeroinitializer, <4 x float>* %p, align 16, !nontemporal !0
%p1 = getelementptr inbounds <4 x float>, <4 x float>* %dst, i64 1
store <4 x float> zeroinitializer, <4 x float>* %p1, align 16, !nontemporal !0
ret void
}
!0 = !{i32 1}
;;;
In this example, the two nontemporal stores are combined to a memset of zero
which does not preserve the nontemporal hint. Later on the backend (tested on a
x86-64 corei7) expands that memset call into a sequence of two normal 16-byte
aligned vector stores.
opt -memcpyopt example.ll -S -o - | llc -mcpu=corei7 -o -
Before:
xorps %xmm0, %xmm0
movaps %xmm0, 16(%rdi)
movaps %xmm0, (%rdi)
With this patch, we no longer merge nontemporal stores into calls to memset.
In this example, llc correctly expands the two stores into two movntps:
xorps %xmm0, %xmm0
movntps %xmm0, 16(%rdi)
movntps %xmm0, (%rdi)
In theory, we could extend the usage of !nontemporal metadata to memcpy/memset
calls. However a change like that would only have the effect of forcing the
backend to expand !nontemporal memsets back to sequences of store instructions.
A memset library call would not have exactly the same semantic of a builtin
!nontemporal memset call. So, SelectionDAG will have to conservatively expand
it back to a sequence of !nontemporal stores (effectively undoing the merging).
Differential Revision: http://reviews.llvm.org/D13519
llvm-svn: 249820
Summary:
These non-semantic changes will help make a later change adding
support for deopt operand bundles more streamlined.
Reviewers: reames, swaroop.sridhar
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13491
llvm-svn: 249779
Summary:
This will be used in a later change to RewriteStatepointsForGC.
Reviewers: reames, swaroop.sridhar
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13490
llvm-svn: 249777
Summary: Use `const auto &` instead of `auto` in `makeStatepointExplicit`.
Reviewers: reames, swaroop.sridhar
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13454
llvm-svn: 249776
This is an implementation of
https://github.com/google/sanitizers/issues/579
It has a number of advantages over the current mapping:
* Works for non-PIE executables.
* Does not require ASLR; as a consequence, debugging MSan programs in
gdb no longer requires "set disable-randomization off".
* Supports linux kernels >=4.1.2.
* The code is marginally faster and smaller.
This is an ABI break. We never really promised ABI stability, but
this patch includes a courtesy escape hatch: a compile-time macro
that reverts back to the old mapping layout.
llvm-svn: 249753
This is a partial fix for PR24886:
https://llvm.org/bugs/show_bug.cgi?id=24886
Without this IR transform, the backend (x86 at least) was producing inefficient code.
This patch is making 2 assumptions:
1. The canonical form of a fabs() operation is, in fact, the LLVM fabs() intrinsic.
2. The high bit of an FP value is always the sign bit; as noted in the bug report, this isn't specified by the LangRef.
Differential Revision: http://reviews.llvm.org/D13076
llvm-svn: 249702
Summary:
After r249211, SCEV can see through some LCSSA phis. Add a
`replacementPreservesLCSSAForm` check before replacing uses of these phi
nodes with a simplified use of the induction variable to avoid breaking
LCSSA.
Fixes 25047.
Depends on D13460.
Reviewers: atrick, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13461
llvm-svn: 249575
Summary:
Some target intrinsics can access multiple elements, using the pointer as a
base address (e.g. AArch64 ld4). When trying to CSE such instructions,
it must be checked the available value comes from a compatible instruction
because the pointer is not enough to discriminate whether the value is
correct.
Reviewers: ssijaric
Subscribers: mcrosier, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D13475
llvm-svn: 249523
I don't think this assert adds much value, and removing it and related
variables avoids an "unused variable" warning in release builds.
llvm-svn: 249511
Summary:
A series of cosmetic cleanup changes to RewriteStatepointsForGC:
- Rename variables to LLVM style
- Remove some redundant asserts
- Remove an unsued `Pass *` parameter
- Remove unnecessary variables
- Use C++11 idioms where applicable
- Pass CallSite by value, not reference
Reviewers: reames, swaroop.sridhar
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D13370
llvm-svn: 249508
This will allow us to optimize code such as:
int f(int *p) {
int x;
return p == &x;
}
as well as:
int *allocate(void);
int f() {
int x;
int *p = allocate();
return p == &x;
}
The folding can only be done under certain circumstances. Even though p and &x
cannot alias, the comparison must still return true if the pointer
representations are equal. If a user successfully generates a p that's a
correct guess for &x, comparison should return true even though p is an invalid
pointer.
This patch argues that if the address of the alloca isn't observable outside the
function, the function can act as-if the address is impossible to guess from the
outside. The tricky part is keeping the act consistent: if we fold p == &x to
false in one place, we must make sure to fold any other comparisons based on
those pointers similarly. To ensure that, we only fold when &x is involved
exactly once in comparison instructions.
Differential Revision: http://reviews.llvm.org/D13358
llvm-svn: 249490
Summary:
After r249211, `getSCEV(X) == getSCEV(Y)` does not guarantee that X and
Y are related in the dominator tree, even if X is an operand to Y (I've
included a toy example in comments, and a real example as a test case).
This commit changes `SimplifyIndVar` to require a `DominatorTree`. I
don't think this is a problem because `ScalarEvolution` requires it
anyway.
Fixes PR25051.
Depends on D13459.
Reviewers: atrick, hfinkel
Subscribers: joker.eph, llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D13460
llvm-svn: 249471
Summary:
- Add CoreCLR to if/else ladders and switches as appropriate.
- Rename isMSVCEHPersonality to isFuncletEHPersonality to better
reflect what it captures.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, AndyAyers, llvm-commits
Differential Revision: http://reviews.llvm.org/D13449
llvm-svn: 249455
If the mask of a select instruction is a ConstantVector, method
SimplifyDemandedVectorElts iterates over the mask elements to identify which
values are selected from the select inputs.
Before this patch, method SimplifyDemandedVectorElts always used method
Constant::isNullValue() to check if a value in the mask was zero. Unfortunately
that method always returns false when called on a ConstantExpr.
This patch fixes the problem in SimplifyDemandedVectorElts by adding an explicit
check for ConstantExpr values. Now, if a value in the mask is a ConstantExpr, we
avoid calling isNullValue() on it.
Fixes PR24922.
Differential Revision: http://reviews.llvm.org/D13219
llvm-svn: 249390
Otherwise, the map will observe changes as long as MergeFunctions is alive. This
is bad because follow-up passes could replace-all-uses-with on the key of an
entry in the map. The value handle callback of ValueMap however asserts that the
key type matches.
rdar://22971893
llvm-svn: 249327
The most important part required to make clang
devirtualization works ( ͡°͜ʖ ͡°).
The code is able to find non local dependencies, but unfortunatelly
because the caller can only handle local dependencies, I had to add
some restrictions to look for dependencies only in the same BB.
http://reviews.llvm.org/D12992
llvm-svn: 249196
When trying to optimize fortified library functions use the right
location to insert new instructions in order to preserve correct
def-use order.
This fixes an issue where a misplaced instruction definition would
happen to be *after* one of its use after a RAUW, forming invalid IR.
This behavior was introduced by r227250.
Differential Revision: http://reviews.llvm.org/D13301
rdar://problem/22802369
llvm-svn: 249092
Summary:
Some passes may open up opportunities for optimizations, leaving empty
lifetime start/end ranges. For example, with the following code:
void foo(char *, char *);
void bar(int Size, bool flag) {
for (int i = 0; i < Size; ++i) {
char text[1];
char buff[1];
if (flag)
foo(text, buff); // BBFoo
}
}
the loop unswitch pass will create 2 versions of the loop, one with
flag==true, and the other one with flag==false, but always leaving
the BBFoo basic block, with lifetime ranges covering the scope of the for
loop. Simplify CFG will then remove BBFoo in the case where flag==false,
but will leave the lifetime markers.
This patch teaches InstCombine to remove trivially empty lifetime marker
ranges, that is ranges ending right after they were started (ignoring
debug info or other lifetime markers in the range).
This fixes PR24598: excessive compile time after r234581.
Reviewers: reames, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13305
llvm-svn: 249018
Summary:
The instructions SeenExprs records may be deleted during rewriting.
FindClosestMatchingDominator should ignore these deleted instructions.
Fixes PR24301.
Reviewers: grosser
Subscribers: grosser, llvm-commits
Differential Revision: http://reviews.llvm.org/D13315
llvm-svn: 248983
Summary:
Given an array of i2 elements, 4 consecutive scalar loads will be lowered to
i8-sized loads and thus will access 4 consecutive bytes in memory. If we
vectorize these loads into a single <4 x i2> load, it'll access only 1 byte in
memory. Hence, we should prohibit vectorization in such cases.
PS: Initial patch was proposed by Arnold.
Reviewers: aschwaighofer, nadav, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13277
llvm-svn: 248943
Same strategy as simplifyInstructionsInBlock. ~1/3 less time
on my test suite. This pass doesn't have many in-tree users,
but getting rid of an O(N^2) worst case and making it cleaner
should at least make it a viable alternative to ADCE, since
it's now consistently somewhat faster.
llvm-svn: 248927
Usually large blocks are not a problem. But if a large block (> 10k instructions)
contains many (potential) chains of vector instructions, and those chains are
spread over a wide range of instructions, then scheduling becomes a compile time problem.
This change introduces a limit for the accumulate scheduling region size of a block.
For real-world functions this limit will never be exceeded (it's about 10x larger than
the maximum value seen in the test-suite and external test suite).
llvm-svn: 248917
This patch teaches InstCombiner how to convert a SSSE3/AVX2 byte shuffle to a
builtin shuffle if the mask is constant.
Converting byte shuffle intrinsic calls to builtin shuffles can help finding
more opportunities for combining shuffles later on in selection dag.
We may end up with byte shuffles with constant masks as the result of inlining.
Differential Revision: http://reviews.llvm.org/D13252
llvm-svn: 248913
Currently SimplifyDemandedVectorElts can only peek through bitcasts if the vectors have the same number of elements.
This patch fixes and enables some existing (disabled) code to support bitcasting to vectors with more/fewer elements. It currently only accepts cases when vectors alias cleanly (i.e. number of elements are an exact multiple of the other vector).
This was added to improve the demanded vector elements support for SSE vector shifts which require the __m128i (<2 x i64>) argument type to be bitcast to the vector type for the builtin shift. I've added extra tests for various additional bitcasts.
Differential Revision: http://reviews.llvm.org/D12935
llvm-svn: 248784
Summary: This patch adds block frequency analysis to LoopUnswitch pass to recognize hot/cold regions. For cold regions the pass only performs trivial unswitches since they do not increase code size, and for hot regions everything works as before. This helps to minimize code growth in cold regions and be more aggressive in hot regions. Currently the default cold regions are blocks with frequencies below 20% of function entry frequency, and it can be adjusted via -loop-unswitch-cold-block-frequency flag. The entire feature is controlled via -loop-unswitch-with-block-frequency flag and it is off by default.
Reviewers: broune, silvas, dnovillo, reames
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D11605
llvm-svn: 248777
Place new and update dbg.declare calls immediately after the
corresponding alloca.
Current code in replaceDbgDeclareForAlloca puts the new dbg.declare
at the end of the basic block. LLVM codegen has problems emitting
debug info in a situation when dbg.declare appears after all uses of
the variable. This usually kinda works for inlining and ASan (two
users of this function) but not for SafeStack (see the pending change
in http://reviews.llvm.org/D13178).
llvm-svn: 248769
Patch by Jake VanAdrighem!
Summary:
Fix the way we sort the llvm.used and llvm.compiler.used members.
This bug seems to have been introduced in rL183756 through a set of improper casts to GlobalValue*. In subsequent patches this problem was missed and transformed into a getName call on a ConstantExpr.
Reviewers: silvas
Subscribers: silvas, llvm-commits
Differential Revision: http://reviews.llvm.org/D12851
llvm-svn: 248728
1. Use a worklist, not a recursive approach, to avoid needless
revisitation and being repeatedly forced to jump back to the
start of the BB if a handle is invalidated.
2. Only insert operands to the worklist if they become unused
after a dead instruction is removed, so we don’t have to
visit them again in most cases.
3. Use a SmallSetVector to track the worklist.
4. Instead of pre-initting the SmallSetVector like in
DeadCodeEliminationPass, only put things into the worklist
if they have to be revisited after the first run-through.
This minimizes how much the actual SmallSetVector gets used,
which saves a lot of time.
llvm-svn: 248727
Originally, debug intrinsics and annotation intrinsics may prevent
the loop to be rerolled, now they are ignored.
Differential Revision: http://reviews.llvm.org/D13150
llvm-svn: 248718
This is one step towards solving PR24766:
https://llvm.org/bugs/show_bug.cgi?id=24766
We were not producing the same IR for these two C functions because the store
to the temp bool causes extra zexts:
#include <stdbool.h>
bool switchy(char x1, char x2, char condition) {
bool conditionMet = false;
switch (condition) {
case 0: conditionMet = (x1 == x2); break;
case 1: conditionMet = (x1 <= x2); break;
}
return conditionMet;
}
bool switchy2(char x1, char x2, char condition) {
switch (condition) {
case 0: return (x1 == x2);
case 1: return (x1 <= x2);
}
return false;
}
As noted in the code comments, this test case manages to avoid the more general existing
phi optimizations where there are only 2 phi inputs or where there are no constant phi
args mixed in with the casts ops. It seems like a corner case, but if we don't catch it,
then I don't think we can get SimplifyCFG to further optimize towards the canonical form
for this function shown in the bug report.
Differential Revision: http://reviews.llvm.org/D12866
llvm-svn: 248689
Summary:
Factor the code that rewrites invokes to calls and rewrites WinEH
terminators to their "unwind to caller" equivalents into a helper in
Utils/Local, and use it in the three places I'm aware of that need to do
this.
Reviewers: andrew.w.kaylor, majnemer, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13152
llvm-svn: 248677
This is a fix for PR22723:
https://llvm.org/bugs/show_bug.cgi?id=22723
My first attempt at this was to change what I thought was the root problem:
xor (zext i1 X to i32), 1 --> zext (xor i1 X, true) to i32
...but we create the opposite pattern in InstCombiner::visitZExt(), so infinite loop!
My next idea was to fix the matchIfNot() implementation in PatternMatch, but that would
mean potentially returning a different size for the match than what was input. I think
this would require all users of m_Not to check the size of the returned match, so I
abandoned that idea.
I settled on just fixing the exact case presented in the PR. This patch does allow the
2 functions in PR22723 to compile identically (x86):
bool test(bool x, bool y) { return !x | !y; }
bool test(bool x, bool y) { return !x || !y; }
...
andb %sil, %dil
xorb $1, %dil
movb %dil, %al
retq
Differential Revision: http://reviews.llvm.org/D12705
llvm-svn: 248634
Loop unswitching produces conditional branches with constant condition,
and it's beneficial for later passes to clean this up with simplify-cfg.
We do this after the second invocation of loop-unswitch, but not after
the first one. Not doing so might cause problem for passes like
LoopUnroll, whose estimate of loop body size would be less accurate.
Reviewers: hfinkel
Differential Revision: http://reviews.llvm.org/D13064
llvm-svn: 248460
Nothing is expected to change, except we do less redundant work in
clean-up.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12951
llvm-svn: 248444
In -fprofile-instr-generate compilation, to remove the redundant profile
variables for the COMDAT functions, these variables are placed in the same
COMDAT group as its associated function. This way when the COMDAT function
is not picked by the linker, those profile variables will also not be
output in the final binary. This may cause warning when mix link objects
built w and wo -fprofile-instr-generate.
This patch puts the profile variables for COMDAT functions to its own COMDAT
group to avoid the problem.
Patch by xur.
Differential Revision: http://reviews.llvm.org/D12248
llvm-svn: 248440
This patch changes the order of GEPs generated by Splitting GEPs
pass, specially when one of the GEPs has constant and the base is
loop invariant, then we will generate the GEP with constant first
when beneficial, to expose more cases for LICM.
If originally Splitting GEP generate the following:
do.body.i:
%idxprom.i = sext i32 %shr.i to i64
%2 = bitcast %typeD* %s to i8*
%3 = shl i64 %idxprom.i, 2
%uglygep = getelementptr i8, i8* %2, i64 %3
%uglygep7 = getelementptr i8, i8* %uglygep, i64 1032
...
Now it genereates:
do.body.i:
%idxprom.i = sext i32 %shr.i to i64
%2 = bitcast %typeD* %s to i8*
%3 = shl i64 %idxprom.i, 2
%uglygep = getelementptr i8, i8* %2, i64 1032
%uglygep7 = getelementptr i8, i8* %uglygep, i64 %3
...
For no-loop cases, the original way of generating GEPs seems to
expose more CSE cases, so we don't change the logic for no-loop
cases, and only limit our change to the specific case we are
interested in.
llvm-svn: 248420
Add two new ways of accessing the unsafe stack pointer:
* At a fixed offset from the thread TLS base. This is very similar to
StackProtector cookies, but we plan to extend it to other backends
(ARM in particular) soon. Bionic-side implementation here:
https://android-review.googlesource.com/170988.
* Via a function call, as a fallback for platforms that provide
neither a fixed TLS slot, nor a reasonable TLS implementation (i.e.
not emutls).
This is a re-commit of a change in r248357 that was reverted in
r248358.
llvm-svn: 248405
This changes the behavior of AddAligntmentAssumptions to match its
comment. I.e, prove the asserted alignment in the context of the caller,
not the callee.
Thanks to Mehdi Amini for seeing the issue here! Also to Artur Pilipenko
who also saw a fix for the issue.
rdar://22521387
Differential Revision: http://reviews.llvm.org/D12997
llvm-svn: 248390
Invoking a function which returns an aggregate can sometimes be
transformed to return a scalar value. However, this means that we need
to create an insertvalue instruction(s) to recreate the correct
aggregate type. We achieved this by inserting an insertvalue
instruction at the invoke's normal successor. However, this is not
feasible if the normal successor uses the invoke's return value inside a
PHI node.
Instead, split the edge between the invoke and the unwind successor and
create the insertvalue instruction in the new basic block. The new
basic block's successor will be the old invoke successor which leaves
us with IR which is well behaved.
This fixes PR24906.
llvm-svn: 248387
This change allows dead store elimination to remove zero and null stores into memory freshly allocated with calloc-like function.
Differential Revision: http://reviews.llvm.org/D13021
llvm-svn: 248374
This patches removes the x86.sse41.pmovsx* intrinsics, provides a suitable upgrade path and updates relevant tests to sign extend a subvector instead.
LLVM counterpart to D12835
Differential Revision: http://reviews.llvm.org/D13002
llvm-svn: 248368
Summary:
It is fairly common to call SE->getConstant(Ty, 0) or
SE->getConstant(Ty, 1); this change makes such uses a little bit
briefer.
I've refactored the call sites I could find easily to use getZero /
getOne.
Reviewers: hfinkel, majnemer, reames
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12947
llvm-svn: 248362
Add two new ways of accessing the unsafe stack pointer:
* At a fixed offset from the thread TLS base. This is very similar to
StackProtector cookies, but we plan to extend it to other backends
(ARM in particular) soon. Bionic-side implementation here:
https://android-review.googlesource.com/170988.
* Via a function call, as a fallback for platforms that provide
neither a fixed TLS slot, nor a reasonable TLS implementation (i.e.
not emutls).
llvm-svn: 248357
Apart from checking that GlobalVariable is a constant, we should check
that it's not a weak constant, in which case we can't propagate its
value.
llvm-svn: 248327
Summary:
We should either require the DT info to be available, or check if it's
available in every place we use DT (and we already miss such check in
one place, which causes failures in some cases). As other loop passes
preserve DT and it's usually available, it makes sense to just require
it here.
There is no regression test, because the bug only shows up if pass
manager decides to clean DT info right before LoopUnswitch. If
loop-unswitch is run separately, DT is available, so bug isn't exposed.
Reviewers: chandlerc, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13036
llvm-svn: 248230
We know that an argmemonly function can only access memory pointed to by it's pointer arguments. Rather than needing to consider all possible stores as aliasing (as we do for a readonly function), we can only consider the aliasing of the pointer arguments.
Note that this change only addresses hoisting. I'm thinking about how to address speculation safety as well, but that will be a different change.
FYI, argmemonly disallows accessing memory through non-pointer typed arguments.
Differential Revision: http://reviews.llvm.org/D12771
llvm-svn: 248220
We're currently losing any fast-math flags when synthesizing fcmps for
min/max reductions. In LV, make sure we copy over the scalar inst's
flags. In LoopUtils, we know we only ever match patterns with
hasUnsafeAlgebra, so apply that to any synthesized ops.
llvm-svn: 248201
evaluate whether 'readonly' or 'readnone' apply to a given function.
This both reduces indentation and will make it easy to share the logic
with a new pass manager implementation.
llvm-svn: 248181
Because -indvars widens induction variables through arithmetic,
`NeverNegative` cannot be a property of the `WidenIV` (a `WidenIV`
manages information for all transitive uses of an IV being widened,
including uses of `-1 * IV`). Instead it must live on `NarrowIVDefUse`
which manages information for a specific def-use edge in the transitive
use list of an induction variable.
This change also adds a test case that demonstrates the problem with
r248045.
llvm-svn: 248107
Summary:
If an induction variable is provably non-negative, its sign extension is
equal to its zero extension. This means narrow uses like
icmp slt iNarrow %indvar, %rhs
can be widened into
icmp slt iWide zext(%indvar), sext(%rhs)
Reviewers: atrick, mcrosier, hfinkel
Subscribers: hfinkel, reames, llvm-commits
Differential Revision: http://reviews.llvm.org/D12745
llvm-svn: 248045
The SSE4A instructions EXTRQ/INSERTQ only use the lower 64-bits (or less) for many of their input vector operands and all of them have undefined upper 64-bits results.
Differential Revision: http://reviews.llvm.org/D12680
llvm-svn: 247934
Summary:
`signum(x)` is sometimes implemented as `(x >> 63) | (-x >>> 63)` (for
an `i64` `x`). This change adds a matcher for that pattern, and an
instcombine rule to optimize `signum(x) s< 1`.
Later, we can also consider optimizing:
icmp slt signum(x), 0 --> icmp slt x, 0
icmp sle signum(x), 1 --> true
etc.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12703
llvm-svn: 247846
This patch adds support for msan on aarch64-linux for both 39 and
42-bit VMA. The support is enabled by defining the
SANITIZER_AARCH64_VMA compiler flag to either 39 or 42 at build time
for both clang/llvm and compiler-rt. The default VMA is 39 bits.
llvm-svn: 247807
We only checked that a global is initialized with constants, which is
incorrect. We should be checking that GlobalVariable *is* a constant,
not just initialized with it.
llvm-svn: 247769
In `IndVarSimplify::ExpandSCEVIfNeeded`,
`SCEVExpander::findExistingExpansion` may return an `llvm::Value` that
differs in type from the SCEV it was asked to find an expansion for (but
computes the same value). In such cases, we fall back on
`expandCodeFor`; and rely on LLVM to CSE the two equivalent
expressions (different only by a no-op cast) into a single computation.
I tried a few other approaches to fixing PR24783, all of which turned
out to be more complex than this current version:
1. Move the `ExpandSCEVIfNeeded` logic into `expandCodeFor`. This got
problematic because currently we do not pass in the `Loop *` into
`expandCodeFor`. Changing the interface to do this is a more
invasive change, and really does not make much semantic sense unless
the SCEV being passed in is an add recurrence.
There is also the problem of `expandCodeFor` being used in places
other than `indvars` -- there may be performance / correctness
issues elsewhere if `expandCodeFor` is moved from always generating
IR from scratch to cache-like model.
2. Have `findExistingExpansion` only return expression with the correct
type. This would make `isHighCostExpansionHelper` and thus
`isHighCostExpansion` more conservative than necessary.
3. Insert casts on the value returned by `findExistingExpansion` if
needed using `InsertNoopCastOfTo`. This is complicated because
`InsertNoopCastOfTo` depends on internal state of its
`SCEVExpander` (specifically `Builder.GetInserPoint()`), and this
may not be set up when `ExpandSCEVIfNeeded` is called.
4. Manually insert casts on the value returned by
`findExistingExpansion` if needed using `InsertNoopCastOfTo` via
`CastInst::Create`. This is probably workable, but figuring out the
location where the cast instruction needs to be inserted has enough
edge cases (arguments, constants, invokes, LCSSA must be preserved)
makes me feel what I have right now is simplest solution.
llvm-svn: 247749
These sections contain pointers to function that should be invoked
during startup/shutdown by __libc_csu_init and __libc_csu_fini.
Instrumenting these globals will append redzone to them, which will be
filled with zeroes. This will cause null pointer dereference at runtime.
Merge ASan regression tests for globals that should be ignored by
instrumentation pass.
llvm-svn: 247734
The patch extends the optimization to cases where the constant's
magnitude is so small or large that the rounding of the conversion
is irrelevant. The "so small" case includes negative zero.
Differential review: http://reviews.llvm.org/D11210
llvm-svn: 247708
LazuValueInfo can prove that value is nonnull based on the context information.
Make use of this ability to infer nonnull attributes for the call arguments.
Differential Revision: http://reviews.llvm.org/D12836
llvm-svn: 247707
Summary:
This change lets a `PlaceSafepoints` client change how wide the trip
count of a loop has to be for the loop to be considerd "counted", via
`CountedLoopTripWidth`. It also removes the boolean `SkipCounted` flag
and the `upperTripBound` constant -- we can get the old behavior of
`SkipCounted` == `false` by setting `CountedLoopTripWidth` to `13` (2 ^
13 == 8192).
Reviewers: reames
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D12789
llvm-svn: 247656
Summary: This patch replaces isKnownNonNull() with isKnownNonNullAt() when checking nullness of passing arguments at callsite. In this way it can handle cases where the argument does not have nonnull attribute but has a dominating null check from the CFG. It also adds assertions in isKnownNonNull() and isKnownNonNullFromDominatingCondition() to make sure the value checked is pointer type (as defined in LLVM document). These assertions might trip failures in things which are not covered under llvm/test, but fixes should be pretty obvious.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12779
llvm-svn: 247587
This was a flawed change - it just caused the getElementType call to be
deferred until later, when we really need to remove it. Now that the IR
for GlobalAliases has been updated, the root cause is addressed that way
instead and this change is no longer needed (and in fact gets in the way
- because we want to pass the pointee type directly down further).
Follow up patches to push this through GlobalValue, bitcode format, etc,
will come along soon.
This reverts commit 236160.
llvm-svn: 247585
GetElementPointers must have the first argument's type compared
for structural equivalence. Previously the code erroneously compared the
pointer's type, but this code was dead because all pointer types (of the
same address space) are the same. The pointee must be compared instead
(using the type stored in the GEP, not from the pointer type which will
be erased anyway).
Author: jrkoenig
Reviewers: dschuff, nlewycky, jfb
Subscribers: nlewycky, llvm-commits
Differential revision: http://reviews.llvm.org/D12820
llvm-svn: 247570
of a method and into a re-usable static helper. We can potentially use
this function from the implementation of a new pass manager oriented
version of the pass. Also add some better documentation of exactly what
the semantic model of this routine is (it isn't trivial) and use a more
modern naming convention for it.
llvm-svn: 247524
static function rather than a method. It just needed access to
TargetLibraryInfo, and this way it can be easily reused between the
current FunctionAttrs implementation and any port for the new pass
manager.
llvm-svn: 247522
comments, deleting duplicate comments, moving comments to consistently
live on the definition since these are all really internal routines,
etc. NFC.
llvm-svn: 247520
Improved InstCombine support for CVTPH2PS (F16C half 2 float conversion):
<4 x float> @llvm.x86.vcvtph2ps.128(<8 x i16>) - only uses the bottom 4 i16 elements for the conversion.
Added constant folding support.
Differential Revision: http://reviews.llvm.org/D12731
llvm-svn: 247504
In some ways this is a very boring port to the new pass manager as there
are no interesting analyses or dependencies or other oddities.
However, this does introduce the first good example of a transformation
pass with non-trivial state porting to the new pass manager. I've tried
to carve out patterns here to replicate elsewhere, and would appreciate
comments on whether folks like these patterns:
- A common need in the new pass manager is to effectively lift the pass
class and some of its state into a public header file. Prior to this,
LLVM used anonymous namespaces to provide "module private" types and
utilities, but that doesn't scale to cases where a public header file
is needed and the new pass manager will exacerbate that. The pattern
I've adopted here is to use the namespace-cased-name of the core pass
(what would be a module if we had them) as a module-private namespace.
Then utility and other code can be declared and defined in this
namespace. At some point in the future, we could even have
(conditionally compiled) code that used modules features when
available to do the same basic thing.
- I've split the actual pass run method in two in order to expose
a private method usable by the old pass manager to wrap the new class
with a minimum of duplicated code. I actually looked at a bunch of
ways to automate or generate these, but they are all quite terrible
IMO. The fundamental need is to extract the set of analyses which need
to cross this interface boundary, and that will end up being too
unpredictable to effectively encapsulate IMO. This is also
a relatively small amount of boiler plate that will live a relatively
short time, so I'm not too worried about the fact that it is boiler
plate.
The rest of the patch is totally boring but results in a massive diff
(sorry). It just moves code around and removes or adds qualifiers to
reflect the new name and nesting structure.
Differential Revision: http://reviews.llvm.org/D12773
llvm-svn: 247501
Summary: This fixes a variety of typos in docs, code and headers.
Subscribers: jholewinski, sanjoy, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12626
llvm-svn: 247495
Summary: This patch replaces isKnownNonNull() with isKnownNonNullAt() when checking nullness of passing arguments at callsite. In this way it can handle cases where the argument does not have nonnull attribute but has a dominating null check from the CFG.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12779
llvm-svn: 247356
Summary: This patch replaces isKnownNonNull() with isKnownNonNullAt() when checking nullness of gc.relocate return value. In this way it can handle cases where the relocated value does not have nonnull attribute but has a dominating null check from the CFG.
Reviewers: reames
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D12772
llvm-svn: 247353
This patch enables small size reductions in which the source types are smaller
than the reduction type (e.g., computing an i16 sum from the values in an i8
array). The previous behavior was to only allow small size reductions if the
source types and reduction type were the same. The change accounts for the fact
that the existing sign- and zero-extend instructions in these cases should
still be included in the cost model.
Differential Revision: http://reviews.llvm.org/D12770
llvm-svn: 247337
This change correctly sets the attributes on the callsites
generated in thunks. This makes sure things such as sret, sext, etc.
are correctly set, so that the call can be a proper tailcall.
Also, the transfer of attributes in the replaceDirectCallers function
appears to be unnecessary, but until this is confirmed it will remain.
Author: jrkoenig
Reviewers: dschuff, jfb
Subscribers: llvm-commits, nlewycky
Differential revision: http://reviews.llvm.org/D12581
llvm-svn: 247313
This is a follow up to http://reviews.llvm.org/D11995 implementing the suggestion by Hans.
If we know some of the bits of the value being switched on, we know that the maximum number of unique cases covers the unknown bits. This allows to eliminate switch defaults for large integers (i32) when most bits in the value are known.
Note that I had to make the transform contingent on not having any dead cases. This is conservatively correct with the old code, but required for the new code since we might have a dead case which varies one of the known bits. Counting that towards our number of covering cases would be bad. If we do have dead cases, we'll eliminate them first, then revisit the possibly dead default.
Differential Revision: http://reviews.llvm.org/D12497
llvm-svn: 247309
Except the changes that defined virtual destructors as =default, because that
ran into problems with GCC 4.7 and overriding methods that weren't noexcept.
llvm-svn: 247298
removes cast by performing the lshr on smaller types. However, currently there
is no trunc(lshr (sext A), Cst) variant.
This patch add such optimization by transforming trunc(lshr (sext A), Cst)
to ashr A, Cst.
Differential Revision: http://reviews.llvm.org/D12520
llvm-svn: 247271
GlobalsAA must by definition be preserved in function passes, but the passmanager doesn't know that. Make each pass explicitly preserve GlobalsAA.
llvm-svn: 247263
The assertion was weaker than it should be and gave the impression we're growing the number of base defining values being considered during the fixed point interation. That's not true. The tighter form of the assert is useful documentation.
llvm-svn: 247221
This change is simply enhancing the existing inference algorithm to handle insertelement instructions by conservatively inserting a new instruction to propagate the vector of associated base pointers. In the process, I'm ripping out the peephole optimizations which mostly helped cover the fact this hadn't been done.
Note that most of the newly inserted nodes will be nearly immediately removed by the post insertion optimization pass introduced in 246718. Arguably, we should be trying harder to avoid the malloc traffic here, but I'd rather get the code correct, then worry about compile time.
Unlike previous extensions of the algorithm to handle more case, I discovered the existing code was causing miscompiles in some cases. In particular, we had an implicit assumption that the peephole covered *all* insert element instructions, so if we had a value directly based on a insert element the peephole didn't cover, we proceeded as if it were a base anyways. Not good. I believe we had the same issue with shufflevector which is why I adjusted the predicate for them as well.
Differential Revision: http://reviews.llvm.org/D12583
llvm-svn: 247210
Previously, the base pointer algorithm wasn't deterministic. The core fixed point was (of course), but we were inserting new nodes and optimizing them in an order which was unspecified and variable. We'd somewhat hacked around this for testing by sorting by value name, but that doesn't solve the general determinism problem.
Instead, we can use the order of traversal over the def/use graph to give us a single consistent ordering. Today, this is a DFS order, but the exact order doesn't mater provided it's deterministic for a given input.
(Q: It is safe to rely on a deterministic order of operands right?)
Note that this only fixes the determinism within a single inference step. The inference step is currently invoked many times in a non-deterministic order. That's a future change in the sequence. :)
Differential Revision: http://reviews.llvm.org/D12640
llvm-svn: 247208
Visit disjoint sets in a deterministic order based on the maximum BitSetNM
index, otherwise the order in which we visit them will depend on pointer
comparisons. This was being exposed by MSan.
llvm-svn: 247201
with the new pass manager, and no longer relying on analysis groups.
This builds essentially a ground-up new AA infrastructure stack for
LLVM. The core ideas are the same that are used throughout the new pass
manager: type erased polymorphism and direct composition. The design is
as follows:
- FunctionAAResults is a type-erasing alias analysis results aggregation
interface to walk a single query across a range of results from
different alias analyses. Currently this is function-specific as we
always assume that aliasing queries are *within* a function.
- AAResultBase is a CRTP utility providing stub implementations of
various parts of the alias analysis result concept, notably in several
cases in terms of other more general parts of the interface. This can
be used to implement only a narrow part of the interface rather than
the entire interface. This isn't really ideal, this logic should be
hoisted into FunctionAAResults as currently it will cause
a significant amount of redundant work, but it faithfully models the
behavior of the prior infrastructure.
- All the alias analysis passes are ported to be wrapper passes for the
legacy PM and new-style analysis passes for the new PM with a shared
result object. In some cases (most notably CFL), this is an extremely
naive approach that we should revisit when we can specialize for the
new pass manager.
- BasicAA has been restructured to reflect that it is much more
fundamentally a function analysis because it uses dominator trees and
loop info that need to be constructed for each function.
All of the references to getting alias analysis results have been
updated to use the new aggregation interface. All the preservation and
other pass management code has been updated accordingly.
The way the FunctionAAResultsWrapperPass works is to detect the
available alias analyses when run, and add them to the results object.
This means that we should be able to continue to respect when various
passes are added to the pipeline, for example adding CFL or adding TBAA
passes should just cause their results to be available and to get folded
into this. The exception to this rule is BasicAA which really needs to
be a function pass due to using dominator trees and loop info. As
a consequence, the FunctionAAResultsWrapperPass directly depends on
BasicAA and always includes it in the aggregation.
This has significant implications for preserving analyses. Generally,
most passes shouldn't bother preserving FunctionAAResultsWrapperPass
because rebuilding the results just updates the set of known AA passes.
The exception to this rule are LoopPass instances which need to preserve
all the function analyses that the loop pass manager will end up
needing. This means preserving both BasicAAWrapperPass and the
aggregating FunctionAAResultsWrapperPass.
Now, when preserving an alias analysis, you do so by directly preserving
that analysis. This is only necessary for non-immutable-pass-provided
alias analyses though, and there are only three of interest: BasicAA,
GlobalsAA (formerly GlobalsModRef), and SCEVAA. Usually BasicAA is
preserved when needed because it (like DominatorTree and LoopInfo) is
marked as a CFG-only pass. I've expanded GlobalsAA into the preserved
set everywhere we previously were preserving all of AliasAnalysis, and
I've added SCEVAA in the intersection of that with where we preserve
SCEV itself.
One significant challenge to all of this is that the CGSCC passes were
actually using the alias analysis implementations by taking advantage of
a pretty amazing set of loop holes in the old pass manager's analysis
management code which allowed analysis groups to slide through in many
cases. Moving away from analysis groups makes this problem much more
obvious. To fix it, I've leveraged the flexibility the design of the new
PM components provides to just directly construct the relevant alias
analyses for the relevant functions in the IPO passes that need them.
This is a bit hacky, but should go away with the new pass manager, and
is already in many ways cleaner than the prior state.
Another significant challenge is that various facilities of the old
alias analysis infrastructure just don't fit any more. The most
significant of these is the alias analysis 'counter' pass. That pass
relied on the ability to snoop on AA queries at different points in the
analysis group chain. Instead, I'm planning to build printing
functionality directly into the aggregation layer. I've not included
that in this patch merely to keep it smaller.
Note that all of this needs a nearly complete rewrite of the AA
documentation. I'm planning to do that, but I'd like to make sure the
new design settles, and to flesh out a bit more of what it looks like in
the new pass manager first.
Differential Revision: http://reviews.llvm.org/D12080
llvm-svn: 247167
Predicating stores requires creating extra blocks. It's much cleaner if we do this in one pass instead of mutating the CFG while writing vector instructions.
Besides which we can make use of helper functions to update domtree for us, reducing the work we need to do.
llvm-svn: 247139
This change extends the bitset lowering pass to support bitsets that may
contain either functions or global variables. A function bitset is lowered to
a jump table that is laid out before one of the functions in the bitset.
Also add support for non-string bitset identifier names. This allows for
distinct metadata nodes to stand in for names with internal linkage,
as done in D11857.
Differential Revision: http://reviews.llvm.org/D11856
llvm-svn: 247080
removes cast by performing the lshr on smaller types. However, currently there
is no trunc(lshr (sext A), Cst) variant.
This patch add such optimization by transforming trunc(lshr (sext A), Cst)
to ashr A, Cst.
Differential Revision: http://reviews.llvm.org/D12520
llvm-svn: 246997
Trivial multiplication by zero may survive the worklist. We tried to
reassociate the multiplication with a division instruction, causing us
to divide by zero; bail out instead.
This fixes PR24726.
llvm-svn: 246939
As a first step towards a new implementation of the base pointer inference algorithm, introduce an abstraction for BDVs, strengthen the assertions around them, and rewrite the BDV relation code in terms of the abstraction which includes an explicit notion of whether the BDV is also a base. The later is motivated by the fact we had a bug where insertelement was always assumed to be a base pointer even though the BDV code knew it wasn't. The strengthened assertions in this patch would have caught that bug.
The next step will be to separate the DefiningValueMap into a BDV use list cache (entirely within findBasePointers) and a base pointer cache. Having the former will allow me to use a deterministic visit order when visiting BDVs in the inference algorithm and remove a bunch of ordering related hacks. Before actually doing the last step, I'm likely going to extend the lattice with a 'BaseN' (seen only base inputs) state so that I can kill the post process optimization step.
Phabricator Revision: http://reviews.llvm.org/D12608
llvm-svn: 246809
The visit order being used in the base pointer inference algorithm is currently non-deterministic. When working on http://reviews.llvm.org/D12583, I discovered that we were relying on a peephole optimization to get deterministic ordering in one of the test cases.
This change is intented to let me test and land http://reviews.llvm.org/D12583. The current code will not be long lived. I'm starting to investigate a rewrite of the algorithm which will combine the post-process step into the initial algorithm and make the visit order determistic. Before doing that, I wanted to make sure the existing code was complete and the test were stable. Hopefully, patches should be up for review for the new algorithm this week or early next.
llvm-svn: 246801
Summary:
Add a `cleanupendpad` instruction, used to mark exceptional exits out of
cleanups (for languages/targets that can abort a cleanup with another
exception). The `cleanupendpad` instruction is similar to the `catchendpad`
instruction in that it is an EH pad which is the target of unwind edges in
the handler and which itself has an unwind edge to the next EH action.
The `cleanupendpad` instruction, similar to `cleanupret` has a `cleanuppad`
argument indicating which cleanup it exits. The unwind successors of a
`cleanuppad`'s `cleanupendpad`s must agree with each other and with its
`cleanupret`s.
Update WinEHPrepare (and docs/tests) to accomodate `cleanupendpad`.
Reviewers: rnk, andrew.w.kaylor, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12433
llvm-svn: 246751
Summary:
This patch introduces a side table in Merge Functions to
efficiently remove functions from the function set when functions
they refer to are merged. Previously these functions would need to
be compared lg(N) times to find the appropriate FunctionNode in the
tree to defer. With the recent determinism changes, this comparison
is more expensive. In addition, the removal function would not always
actually remove the function from the set (i.e. after remove(F),
there would sometimes still be a node in the tree which contains F).
With these changes, these functions are properly deferred, and so more
functions can be merged. In addition, when there are many merged
functions (and thus more deferred functions), there is a speedup:
chromium: 48678 merged -> 49380 merged; 6.58s -> 5.49s
libxul.so: 41004 merged -> 41030 merged; 8.02s -> 6.94s
mysqld: 1607 merged -> 1607 merged (same); 0.215s -> 0.212s (probably noise)
Author: jrkoenig
Reviewers: jfb, dschuff
Subscribers: llvm-commits, nlewycky
Differential revision: http://reviews.llvm.org/D12537
llvm-svn: 246735
Fix a bug in change 246133. I didn't handle the case where we had a cycle in the use graph and could add an instruction we were about to erase back on to the worklist. Oddly, I have not been able to write a small test case for this, even with the AssertingVH added. I have confirmed the basic theory for the fix on a large failing example, but all attempts to reduce that to something appropriate for a test case have failed.
Differential Revision: http://reviews.llvm.org/D12575
llvm-svn: 246718
There was infinite loop because it was trying to change assume(true) into
assume(true)
Also added handling when assume(false) appear
http://reviews.llvm.org/D12516
llvm-svn: 246697
After hitting @llvm.assume(X) we can:
- propagate equality that X == true
- if X is icmp/fcmp (with eq operation), and one of operand
is constant we can change all variables with constants in the same BasicBlock
http://reviews.llvm.org/D11918
llvm-svn: 246695
This makes RemoveDuplicatePHINodes more effective and fixes an assertion
failure. Triggering the assertions requires a DenseSet reallocation
so this change only contains a constructive test.
I'll explain the issue with a small example. In the following function
there's a duplicate PHI, %4 and %5 are identical. When this is found
the DenseSet in RemoveDuplicatePHINodes contains %2, %3 and %4.
define void @F() {
br label %1
; <label>:1 ; preds = %1, %0
%2 = phi i32 [ 42, %0 ], [ %4, %1 ]
%3 = phi i32 [ 42, %0 ], [ %5, %1 ]
%4 = phi i32 [ 42, %0 ], [ 23, %1 ]
%5 = phi i32 [ 42, %0 ], [ 23, %1 ]
br label %1
}
after RemoveDuplicatePHINodes runs the function looks like this. %3 has
changed and is now identical to %2, but RemoveDuplicatePHINodes never
saw this.
define void @F() {
br label %1
; <label>:1 ; preds = %1, %0
%2 = phi i32 [ 42, %0 ], [ %4, %1 ]
%3 = phi i32 [ 42, %0 ], [ %4, %1 ]
%4 = phi i32 [ 42, %0 ], [ 23, %1 ]
br label %1
}
If the DenseSet does a reallocation now it will reinsert all
keys and stumble over %3 now having a different hash value than it had
when inserted into the map for the first time. This change clears the
set whenever a PHI is deleted and starts the progress from the
beginning, allowing %3 to be deleted and avoiding inconsistent DenseSet
state. This potentially has a negative performance impact because
it rescans all PHIs, but I don't think that this ever makes a difference
in practice.
llvm-svn: 246694
We were bailing to two places if our runtime checks failed. If the initial overflow check failed, we'd go to ScalarPH. If any other check failed, we'd go to MiddleBlock. This caused us to have to have an extra PHI per induction and reduction as the vector loop's exit block was not dominated by its latch.
There's no need to have this behavior - if we just always go to ScalarPH we can get rid of a bunch of complexity.
llvm-svn: 246637
This reduces the complexity of createEmptyBlock() and will open the door to further refactoring.
The test change is simply because we're now constant folding a trivial test.
llvm-svn: 246634
It makes things easier to understand if this is in a helper method. This is part of my ongoing spaghetti-removal operation on createEmptyLoop.
llvm-svn: 246632
There's no need to widen canonical induction variables. It's just as efficient to create a *new*, wide, induction variable.
Consider, if we widen an indvar, then we'll have to truncate it before its uses anyway (1 trunc). If we create a new indvar instead, we'll have to truncate that instead (1 trunc) [besides which IndVars should go and clean up our mess after us anyway on principle].
This lets us remove a ton of special-casing code.
llvm-svn: 246631
Vectorized loops only ever have one induction variable. All induction PHIs from the scalar loop are rewritten to be in terms of this single indvar.
We were trying very hard to pick an indvar that already existed, even if that indvar wasn't canonical (didn't start at zero). But trying so hard is really fruitless - creating a new, canonical, indvar only results in one extra add in the worst case and that add is trivially easy to push through the PHI out of the loop by instcombine.
If we try and be less clever here and instead let instcombine clean up our mess (as we do in many other places in LV), we can remove unneeded complexity.
llvm-svn: 246630
Teach FunctionAttr to infer the nonnull attribute on return values of functions which never return a potentially null value. This is done both via a conservative local analysis for the function itself and a optimistic per-SCC analysis. If no function in the SCC returns anything which could be null (other than values from other functions in the SCC), we can conclude no function returned a null pointer. Even if some function within the SCC returns a null pointer, we may be able to locally conclude that some don't.
Differential Revision: http://reviews.llvm.org/D9688
llvm-svn: 246476
Summary:
JumpThreading shouldn't duplicate a convergent call, because that would move a convergent call into a control-inequivalent location. For example,
if (cond) {
...
} else {
...
}
convergent_call();
if (cond) {
...
} else {
...
}
should not be optimized to
if (cond) {
...
convergent_call();
...
} else {
...
convergent_call();
...
}
Test Plan: test/Transforms/JumpThreading/basic.ll
Patch by Xuetian Weng.
Reviewers: resistor, arsenm, jingyue
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12484
llvm-svn: 246415
PR24605 is caused due to an incorrect insert point in instcombine's IR
builder. When simplifying
%t = add X Y
...
%m = icmp ... %t
the replacement for %t should be placed before %t, not before %m, as
there could be a use of %t between %t and %m.
llvm-svn: 246315
Summary:
This patch removes two remaining places where pointer value comparisons
are used to order functions: comparing range annotation metadata, and comparing
block address constants. (These are both rare cases, and so no actual
non-determinism was observed from either case).
The fix for range metadata is simple: the annotation always consists of a pair
of integers, so we just order by those integers.
The fix for block addresses is more subtle. Two constants are the same if they
are the same basic block in the same function, or if they refer to corresponding
basic blocks in each respective function. Note that in the first case, merging
is trivially correct. In the second, the correctness of merging relies on the
fact that the the values of block addresses cannot be compared. This change is
actually an enhancement, as these functions could not previously be merged (see
merge-block-address.ll).
There is still a problem with cross function block addresses, in that constants
pointing to a basic block in a merged function is not updated.
This also more robustly compares floating point constants by all fields of their
semantics, and fixes a dyn_cast/cast mixup.
Author: jrkoenig
Reviewers: dschuff, nlewycky, jfb
Subscribers llvm-commits
Differential revision: http://reviews.llvm.org/D12376
llvm-svn: 246305
handle more allocas with loads past the end of the alloca.
I suspect there are some related crashers with slightly different
patterns, but I'll fix those and add test cases as I find them.
Thanks to David Majnemer for the excellent test case reduction here.
Made this super simple to debug and fix.
llvm-svn: 246289
After hitting @llvm.assume(X) we can:
- propagate equality that X == true
- if X is icmp/fcmp (with eq operation), and one of operand
is constant we can change all variables with constants in the same BasicBlock
http://reviews.llvm.org/D11918
llvm-svn: 246243
This patch changes the analysis diagnostics produced when loops with
floating-point recurrences or memory operations are identified. The new messages
say "cannot prove it is safe to reorder * operations; allow reordering by
specifying #pragma clang loop vectorize(enable)". Depending on the type of
diagnostic the message will include additional options such as ffast-math or
__restrict__.
This patch also allows the vectorize(enable) pragma to override the low pointer
memory check threshold. When the hint is given a higher threshold is used.
See the clang patch for the options produced for each diagnostic.
llvm-svn: 246187
Unlike scalar operations, we can perform vector operations on element types that
are smaller than the native integer types. We type-promote scalar operations if
they are smaller than a native type (e.g., i8 arithmetic is promoted to i32
arithmetic on Arm targets). This patch detects and removes type-promotions
within the reduction detection framework, enabling the vectorization of small
size reductions.
In the legality phase, we look through the ANDs and extensions that InstCombine
creates during promotion, keeping track of the smaller type. In the
profitability phase, we use the smaller type and ignore the ANDs and extensions
in the cost model. Finally, in the code generation phase, we truncate the result
of the reduction to allow InstCombine to rewrite the entire expression in the
smaller type.
This fixes PR21369.
http://reviews.llvm.org/D12202
Patch by Matt Simpson <mssimpso@codeaurora.org>!
llvm-svn: 246149
... and move it into LoopUtils where it can be used by other passes, just like ReductionDescriptor. The API is very similar to ReductionDescriptor - that is, not very nice at all. Sorting these both out will come in a followup.
NFC
llvm-svn: 246145
A release fence acts as a publication barrier for stores within the current thread to become visible to other threads which might observe the release fence. It does not require the current thread to observe stores performed on other threads. As a result, we can allow store-load and load-store forwarding across a release fence.
We do need to make sure that stores before the fence can't be eliminated even if there's another store to the same location after the fence. In theory, we could reorder the second store above the fence and *then* eliminate the former, but we can't do this if the stores are on opposite sides of the fence.
Note: While more aggressive then what's there, this patch is still implementing a really conservative ordering. In particular, I'm not trying to exploit undefined behavior via races, or the fact that the LangRef says only 'atomic' accesses are ordered w.r.t. fences.
Differential Revision: http://reviews.llvm.org/D11434
llvm-svn: 246134
When computing base pointers, we introduce new instructions to propagate the base of existing instructions which might not be bases. However, the algorithm doesn't make any effort to recognize when the new instruction to be inserted is the same as an existing one already in the IR. Since this is happening immediately before rewriting, we don't really have a chance to fix it after the pass runs without teaching loop passes about statepoints.
I'm really not thrilled with this patch. I've rewritten it 4 different ways now, but this is the best I've come up with. The case where the new instruction is just the original base defining value could be merged into the existing algorithm with some complexity. The problem is that we might have something like an extractelement from a phi of two vectors. It may be trivially obvious that the base of the 0th element is an existing instruction, but I can't see how to make the algorithm itself figure that out. Thus, I resort to the call to SimplifyInstruction instead.
Note that we can only adjust the instructions we've inserted ourselves. The live sets are still being tracked in side structures at this point in the code. We can't easily muck with instructions which might be in them. Long term, I'm really thinking we need to materialize the live pointer sets explicitly in the IR somehow rather than using side structures to track them.
Differential Revision: http://reviews.llvm.org/D12004
llvm-svn: 246133
This patch ensures that every analysis diagnostic produced by the vectorizer
will be printed if the loop has a vectorization hint on it. The condition has
also been improved to prevent printing when a disabling hint is specified.
llvm-svn: 246132
As Sanjoy pointed out over in http://reviews.llvm.org/D11819, a switch on an icmp should always be able to become a branch instruction. This patch generalizes that notion slightly to prove that the default case of a switch is unreachable if the cases completely cover all possible bit patterns in the condition. Once that's done, the switch to branch conversion kicks in just fine.
Note: Duplicate case values are disallowed by the LangRef and verifier.
Differential Revision: http://reviews.llvm.org/D11995
llvm-svn: 246125
The problem here were the function analyses invoked by the function pass
manager from the new IPO pass. I looked at other IPO passes needing
dominance information and the only one that requires it (partial
inliner) does not use the standard dependency mechanism.
This patch mimics what the partial inliner does to compute dominance,
post-dominance and loop info. One thing I like about this approach is
that I can delay the computation of all this until I actually need it.
This should bring the ASAN buildbot back to green. If there's a better
way to fix this, I'll do it in a follow-up patch.
llvm-svn: 246066
This was only added to preserve the old ScalarRepl's use of SSAUpdater
which was originally to avoid use of dominance frontiers. Now, we only
need a domtree, and we'll need a domtree right after this pass as well
and so it makes perfect sense to always and only use the dom-tree
powered mem2reg. This was flag-flipper earlier and has stuck reasonably
so I wanted to gut the now-dead code out of SROA before we waste more
time with it. Among other things, this will make passmanager porting
easier.
llvm-svn: 246028
Summary: When comparing basic blocks, there is an additional check that two Value*'s should have the same ID, which interferes with merging equivalent constants of different kinds (such as a ConstantInt and a ConstantPointerNull in the included testcase). The cmpValues function already ensures that the two values in each function are the same, so removing this check should not cause incorrect merging.
Also, the type comparison is redundant, based on reviewing the code and testing on the test suite and several large LTO bitcodes.
Author: jrkoenig
Reviewers: nlewycky, jfb, dschuff
Subscribers: llvm-commits
Differential revision: http://reviews.llvm.org/D12302
llvm-svn: 246001
Summary:
This change makes the variable argument intrinsics, `llvm.va_start` and
`llvm.va_copy`, and the `va_arg` instruction behave as they do on Windows
inside a `CallingConv::X86_64_Win64` function. It's needed for a Clang patch
I have to add support for GCC's `__builtin_ms_va_list` constructs.
Reviewers: nadav, asl, eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1622
llvm-svn: 245990
Extend signed relational comparison instrumentation with a special
case for comparisons with -1. This fixes an MSan false positive when
such comparison is used as a sign bit test.
https://llvm.org/bugs/show_bug.cgi?id=24561
llvm-svn: 245980
The loop minimum iterations check below ensures the loop has enough trip count so the generated
vector loop will likely be executed, and it covers the overflow check.
Differential Revision: http://reviews.llvm.org/D12107.
llvm-svn: 245952
Eventually, we will need sample profiles to be incorporated into the
inliner's cost models. To do this, we need the sample profile pass to
be a module pass.
This patch makes no functional changes beyond the mechanical adjustments
needed to run SampleProfile as a module pass.
llvm-svn: 245940
It doesn't solve the problem, when for example we load something, and
then assume that it is the same as some constant value, because
globalopt will fail on unknown load instruction. The proposed solution
would be to skip some instructions that we can't evaluate and they are
safe to skip (f.e. load, assume and many others) and see if they are
required to perform optimization (f.e. we don't care about ephemeral
instructions that may appear using @llvm.assume())
http://reviews.llvm.org/D12266
llvm-svn: 245919
This patch adds support for dfsan on aarch64-linux with 42-bit VMA
(current default config for 64K pagesize kernels). The support is
enabled by defining the SANITIZER_AARCH64_VMA to 42 at build time
for both clang/llvm and compiler-rt. The default VMA is 39 bits.
llvm-svn: 245840
TL-DR: SROA is followed by EarlyCSE which requires the DominatorTree.
There is no reason not to require it up-front for SROA.
Some history is necessary to understand why we ended-up here.
r123437 switched the second (Legacy)SROA in the optimizer pipeline to
use SSAUpdater in order to avoid recomputing the costly
DominanceFrontier. The purpose was to speed-up the compile-time.
Later r123609 removed the need for the DominanceFrontier in
(Legacy)SROA.
Right after, some cleanup was made in r123724 to remove any reference
to the DominanceFrontier. SROA existed in two flavors: SROA_SSAUp and
SROA_DT (the latter replacing SROA_DF).
The second argument of `createScalarReplAggregatesPass` was renamed
from `UseDomFrontier` to `UseDomTree`.
I believe this is were a mistake was made. The pipeline was not
updated and the call site was still:
PM->add(createScalarReplAggregatesPass(-1, false));
At that time, SROA was immediately followed in the pipeline by
EarlyCSE which required alread the DominatorTree. Not requiring
the DominatorTree in SROA didn't save anything, but unfortunately
it was lost at this point.
When the new SROA Pass was introduced in r163965, I believe the goal
was to have an exact replacement of the existing SROA, this bug
slipped through.
You can see currently:
$ echo "" | clang -x c++ -O3 -c - -mllvm -debug-pass=Structure
...
...
FunctionPass Manager
SROA
Dominator Tree Construction
Early CSE
After this patch:
$ echo "" | clang -x c++ -O3 -c - -mllvm -debug-pass=Structure
...
...
FunctionPass Manager
Dominator Tree Construction
SROA
Early CSE
This improves the compile time from 88s to 23s for PR17855.
https://llvm.org/bugs/show_bug.cgi?id=17855
And from 113s to 12s for PR16756
https://llvm.org/bugs/show_bug.cgi?id=16756
Reviewers: chandlerc
Differential Revision: http://reviews.llvm.org/D12267
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 245820
Summary:
WinEHPrepare is going to require that cleanuppad and catchpad produce values
of token type which are consumed by any cleanupret or catchret exiting the
pad. This change updates the signatures of those operators to require/enforce
that the type produced by the pads is token type and that the rets have an
appropriate argument.
The catchpad argument of a `CatchReturnInst` must be a `CatchPadInst` (and
similarly for `CleanupReturnInst`/`CleanupPadInst`). To accommodate that
restriction, this change adds a notion of an operator constraint to both
LLParser and BitcodeReader, allowing appropriate sentinels to be constructed
for forward references and appropriate error messages to be emitted for
illegal inputs.
Also add a verifier rule (noted in LangRef) that a catchpad with a catchpad
predecessor must have no other predecessors; this ensures that WinEHPrepare
will see the expected linear relationship between sibling catches on the
same try.
Lastly, remove some superfluous/vestigial casts from instruction operand
setters operating on BasicBlocks.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12108
llvm-svn: 245797
Summary:
Merge functions previously relied on unsigned comparisons of pointer values to
order functions. This caused observable non-determinism in the compiler for
large bitcode programs. Basically, opt -mergefuncs program.bc | md5sum produces
different hashes when run repeatedly on the same machine. Differing output was
observed on three large bitcodes, but it was less frequent on the smallest file.
It is possible that this only manifests on the large inputs, hence remaining
undetected until now.
This patch fixes this by removing (almost, see below) all places where
comparisons between pointers are used to order functions. Most of these changes
are local, but the comparison of global values requires assigning an identifier
to each local in the order it is visited. This is very similar to the way the
comparison function identifies Value*'s defined within a function. Because the
order of visiting the functions and their subparts is deterministic, the
identifiers assigned to the globals will be as well, and the order of functions
will be deterministic.
With these changes, there is no more observed non-determinism. There is also
only minor slowdowns (negligible to 4%) compared to the baseline, which is
likely a result of the fact that global comparisons involve hash lookups and not
just pointer comparisons.
The one caveat so far is that programs containing BlockAddress constants can
still be non-deterministic. It is not clear what the right solution is here. In
particular, even if the global numbers are used to order by function, we still
need a way to order the BasicBlock*'s. Unfortunately, we cannot just bail out
and fail to order the functions or consider them equal, because we require a
total order over functions. Note that programs with BlockAddress constants are
relatively rare, so the impact of leaving this in is minor as long as this pass
is opt-in.
Author: jrkoenig
Reviewers: nlewycky, jfb, dschuff
Subscribers: jevinskie, llvm-commits, chapuni
Differential revision: http://reviews.llvm.org/D12168
llvm-svn: 245762
The original checkin was buggy, this change has a fix.
Original commit message:
[InstCombine] Transform A & (L - 1) u< L --> L != 0
Summary:
This transform is never a pessimization at the IR level (since it
replaces an `icmp` with another), and has potentiall payoffs:
1. It may make the `icmp` fold away or become loop invariant.
2. It may make the `A & (L - 1)` computation dead.
This shows up in Java, in range checks generated by array accesses of
the form `a[i & (a.length - 1)]`.
Reviewers: reames, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12210
llvm-svn: 245753
Gets a bit tricky in the ValueMapper, of course - not sure if we should
just expose a list of explicit types for each Value so that the
ValueMapper can be neutral to these special cases (it's OK for things
like load, where the explicit type is the result type - but when that's
not the case, it means plumbing through another "special" type... )
llvm-svn: 245728
The module splitter splits a module into linkable partitions. It will
be used to implement parallel LTO code generation.
This initial version of the splitter does not attempt to deal with the
somewhat subtle symbol visibility issues around module splitting. These
will be dealt with in a future change.
Differential Revision: http://reviews.llvm.org/D12132
llvm-svn: 245662
Summary:
This transform is never a pessimization at the IR level (since it
replaces an `icmp` with another), and has potentiall payoffs:
1. It may make the `icmp` fold away or become loop invariant.
2. It may make the `A & (L - 1)` computation dead.
This shows up in Java, in range checks generated by array accesses of
the form `a[i & (a.length - 1)]`.
Reviewers: reames, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12210
llvm-svn: 245635
and make it always preserve debug locations, since all callers wanted this
behavior anyway.
This is addressing a post-commit review feedback for r245589.
NFC (inside the LLVM tree).
llvm-svn: 245622
This patch adds support for asan on aarch64-linux with 42-bit VMA
(current default config for 64K pagesize kernels). The support is
enabled by defining the SANITIZER_AARCH64_VMA to 42 at build time
for both clang/llvm and compiler-rt. The default VMA is 39 bits.
llvm-svn: 245594
Summary:
Refactor, NFC
Extracts computeOverflowForSignedAdd and isKnownNonNegative from NaryReassociate to ValueTracking in case
others need it.
Reviewers: reames
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D11313
llvm-svn: 245591
Instruction::dropUnknownMetadata(KnownSet) is supposed to preserve all
metadata in KnownSet, but the condition for DebugLocs was inverted.
Most users of dropUnknownMetadata() actually worked around this by not
adding LLVMContext::MD_dbg to their list of KnowIDs.
This is now made explicit.
llvm-svn: 245589
Caught by the famous "DebugLoc describes the currect SubProgram" assertion.
When GVN is removing a nonlocal load it updates the debug location of the
SSA value it replaced the load with with the one of the load. In the
testcase this actually overwrites a valid debug location with an empty one.
In reality GVN has to make an arbitrary choice between two equally valid
debug locations. This patch changes to behavior to only update the
location if the value doesn't already have a debug location.
llvm-svn: 245588
Since Ashutosh made findDefsUsedOutsideOfLoop public, we can clean this
up.
Now clients that don't compute DefsUsedOutsideOfLoop can just call
versionLoop() and computing DefsUsedOutsideOfLoop will happen
implicitly. With that there is no reason to expose addPHINodes anymore.
Ashutosh, you can now drop the calls to findDefsUsedOutsideOfLoop and
addPHINodes in LVerLICM and things should just work.
llvm-svn: 245579
Summary: We know that -x & 1 is equivalent to x & 1, avoid using negation for testing if a negative integer is even or odd.
Reviewers: majnemer
Subscribers: junbuml, mssimpso, gberry, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D12156
llvm-svn: 245569
Usually DSE is not supposed to remove lifetime intrinsics, but it's
actually ok to remove them for dead objects in terminating blocks,
because they convey no extra information there. Until we hit a lifetime
start that cannot be removed, that is. Because from that point on the
lifetime intrinsics become interesting again, e.g. for stack coloring.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11710
llvm-svn: 245542
analyses into LLVM's Analysis library rather than having them in
a Transforms library.
This is motivated by the need to have the core AliasAnalysis
infrastructure be aware of the ObjCARCAliasAnalysis. However, it also
seems like a nice and clean separation. Everything was very easy to move
and this doesn't create much clutter in the analysis library IMO.
Differential Revision: http://reviews.llvm.org/D12133
llvm-svn: 245541
folding the code into the main Analysis library.
There already wasn't much of a distinction between Analysis and IPA.
A number of the passes in Analysis are actually IPA passes, and there
doesn't seem to be any advantage to separating them.
Moreover, it makes it hard to have interactions between analyses that
are both local and interprocedural. In trying to make the Alias Analysis
infrastructure work with the new pass manager, it becomes particularly
awkward to navigate this split.
I've tried to find all the places where we referenced this, but I may
have missed some. I have also adjusted the C API to continue to be
equivalently functional after this change.
Differential Revision: http://reviews.llvm.org/D12075
llvm-svn: 245318
After hitting @llvm.assume(X) we can:
- propagate equality that X == true
- if X is icmp/fcmp (with eq operation), and one of operand
is constant we can change all variables with constants in the same BasicBlock
http://reviews.llvm.org/D11918
llvm-svn: 245265
PR24469 resulted because DeleteDeadInstruction in handleNonLocalStoreDeletion was
deleting the next basic block iterator. Fixed the same by resetting the basic block iterator
post call to DeleteDeadInstruction.
llvm-svn: 245195
This change makes ScalarEvolution a stand-alone object and just produces
one from a pass as needed. Making this work well requires making the
object movable, using references instead of overwritten pointers in
a number of places, and other refactorings.
I've also wired it up to the new pass manager and added a RUN line to
a test to exercise it under the new pass manager. This includes basic
printing support much like with other analyses.
But there is a big and somewhat scary change here. Prior to this patch
ScalarEvolution was never *actually* invalidated!!! Re-running the pass
just re-wired up the various other analyses and didn't remove any of the
existing entries in the SCEV caches or clear out anything at all. This
might seem OK as everything in SCEV that can uses ValueHandles to track
updates to the values that serve as SCEV keys. However, this still means
that as we ran SCEV over each function in the module, we kept
accumulating more and more SCEVs into the cache. At the end, we would
have a SCEV cache with every value that we ever needed a SCEV for in the
entire module!!! Yowzers. The releaseMemory routine would dump all of
this, but that isn't realy called during normal runs of the pipeline as
far as I can see.
To make matters worse, there *is* actually a key that we don't update
with value handles -- there is a map keyed off of Loop*s. Because
LoopInfo *does* release its memory from run to run, it is entirely
possible to run SCEV over one function, then over another function, and
then lookup a Loop* from the second function but find an entry inserted
for the first function! Ouch.
To make matters still worse, there are plenty of updates that *don't*
trip a value handle. It seems incredibly unlikely that today GVN or
another pass that invalidates SCEV can update values in *just* such
a way that a subsequent run of SCEV will incorrectly find lookups in
a cache, but it is theoretically possible and would be a nightmare to
debug.
With this refactoring, I've fixed all this by actually destroying and
recreating the ScalarEvolution object from run to run. Technically, this
could increase the amount of malloc traffic we see, but then again it is
also technically correct. ;] I don't actually think we're suffering from
tons of malloc traffic from SCEV because if we were, the fact that we
never clear the memory would seem more likely to have come up as an
actual problem before now. So, I've made the simple fix here. If in fact
there are serious issues with too much allocation and deallocation,
I can work on a clever fix that preserves the allocations (while
clearing the data) between each run, but I'd prefer to do that kind of
optimization with a test case / benchmark that shows why we need such
cleverness (and that can test that we actually make it faster). It's
possible that this will make some things faster by making the SCEV
caches have higher locality (due to being significantly smaller) so
until there is a clear benchmark, I think the simple change is best.
Differential Revision: http://reviews.llvm.org/D12063
llvm-svn: 245193
If we can ignore NaNs, fmin/fmax libcalls can become compare and select
(this is what we turn std::min / std::max into).
This IR should then be optimized in the backend to whatever is best for
any given target. Eg, x86 can use minss/maxss instructions.
This should solve PR24314:
https://llvm.org/bugs/show_bug.cgi?id=24314
Differential Revision: http://reviews.llvm.org/D11866
llvm-svn: 245187
Bitwise arithmetic can obscure a simple sign-test. If replacing the
mask with a truncate is preferable if the type is legal because it
permits us to rephrase the comparison more explicitly.
llvm-svn: 245171
ByteSize and BitSize should not be size_t but unsigned, considering
1) They are at most 2^16 and 2^19, respectively.
2) BitSize is an argument to Type::getIntNTy which takes unsigned.
Also, use the correct utostr instead itostr and cache the string result.
Thanks to James Touton for reporting this!
llvm-svn: 245167
Some personality routines require funclet exit points to be clearly
marked, this is done by producing a token at the funclet pad and
consuming it at the corresponding ret instruction. CleanupReturnInst
already had a spot for this operand but CatchReturnInst did not.
Other personality routines don't need to use this which is why it has
been made optional.
llvm-svn: 245149
This patch makes the Merge Functions pass faster by calculating and comparing
a hash value which captures the essential structure of a function before
performing a full function comparison.
The hash is calculated by hashing the function signature, then walking the basic
blocks of the function in the same order as the main comparison function. The
opcode of each instruction is hashed in sequence, which means that different
functions according to the existing total order cannot have the same hash, as
the comparison requires the opcodes of the two functions to be the same order.
The hash function is a static member of the FunctionComparator class because it
is tightly coupled to the exact comparison function used. For example, functions
which are equivalent modulo a single variant callsite might be merged by a more
aggressive MergeFunctions, and the hash function would need to be insensitive to
these differences in order to exploit this.
The hashing function uses a utility class which accumulates the values into an
internal state using a standard bit-mixing function. Note that this is a different interface
than a regular hashing routine, because the values to be hashed are scattered
amongst the properties of a llvm::Function, not linear in memory. This scheme is
fast because only one word of state needs to be kept, and the mixing function is
a few instructions.
The main runOnModule function first computes the hash of each function, and only
further processes functions which do not have a unique function hash. The hash
is also used to order the sorted function set. If the hashes differ, their
values are used to order the functions, otherwise the full comparison is done.
Both of these are helpful in speeding up MergeFunctions. Together they result in
speedups of 9% for mysqld (a mostly C application with little redundancy), 46%
for libxul in Firefox, and 117% for Chromium. (These are all LTO builds.) In all
three cases, the new speed of MergeFunctions is about half that of the module
verifier, making it relatively inexpensive even for large LTO builds with
hundreds of thousands of functions. The same functions are merged, so this
change is free performance.
Author: jrkoenig
Reviewers: nlewycky, dschuff, jfb
Subscribers: llvm-commits, aemerson
Differential revision: http://reviews.llvm.org/D11923
llvm-svn: 245140
This seems to only work some of the time. In some situations,
this seems to use a nonsensical type and isn't actually aware of the
memory being accessed. e.g. if branch condition is an icmp of a pointer,
it checks the addressing mode of i1.
llvm-svn: 245137
Summary: Similar to the change we applied to ASan. The same test case works.
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11961
llvm-svn: 245067
This introduces the basic functionality to support "token types".
The motivation stems from the need to perform operations on a Value
whose provenance cannot be obscured.
There are several applications for such a type but my immediate
motivation stems from WinEH. Our personality routine enforces a
single-entry - single-exit regime for cleanups. After several rounds of
optimizations, we may be left with a terminator whose "cleanup-entry
block" is not entirely clear because control flow has merged two
cleanups together. We have experimented with using labels as operands
inside of instructions which are not terminators to indicate where we
came from but found that LLVM does not expect such exotic uses of
BasicBlocks.
Instead, we can use this new type to clearly associate the "entry point"
and "exit point" of our cleanup. This is done by having the cleanuppad
yield a Token and consuming it at the cleanupret.
The token type makes it impossible to obscure or otherwise hide the
Value, making it trivial to track the relationship between the two
points.
What is the burden to the optimizer? Well, it turns out we have already
paid down this cost by accepting that there are certain calls that we
are not permitted to duplicate, optimizations have to watch out for
such instructions anyway. There are additional places in the optimizer
that we will probably have to update but early examination has given me
the impression that this will not be heroic.
Differential Revision: http://reviews.llvm.org/D11861
llvm-svn: 245029
its creation function.
This required shifting a bunch of method definitions to be out-of-line
so that we could leave most of the implementation guts in the .cpp file.
llvm-svn: 245021
I've used forward declarations and reorderd the source code some to make
this reasonably clean and keep as much of the code as possible in the
source file, including all the stratified set details. Just the basic AA
interface and the create function are in the header file, and the header
file is now included into the relevant locations.
llvm-svn: 245009
Summary:
This patch implements my promised optimization to reunites certain sexts from
operands after we extract the constant offset. See the header comment of
reuniteExts for its motivation.
One key building block that enables this optimization is Bjarke's poison value
analysis (D11212). That helps to prove "a +nsw b" can't overflow.
Reviewers: broune
Subscribers: jholewinski, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12016
llvm-svn: 245003
AliasAnalysis in LoopIdiomRecognize.
The previous commit to LIR, r244879, exposed some scary bug in the loop
pass pipeline with an assert failure that showed up on several bots.
This patch got reverted as part of getting that revision reverted, but
they're actually independent and unrelated. This patch has no functional
change and should be completely safe. It is also useful for my current
work on the AA infrastructure.
llvm-svn: 244993
If <src> is non-zero we can safely set the flag to true, and this
results in less code generated for, e.g. ffs(x) + 1 on FreeBSD.
Thanks to majnemer for suggesting the fix and reviewing.
Code generated before the patch was applied:
0: 0f bc c7 bsf %edi,%eax
3: b9 20 00 00 00 mov $0x20,%ecx
8: 0f 45 c8 cmovne %eax,%ecx
b: 83 c1 02 add $0x2,%ecx
e: b8 01 00 00 00 mov $0x1,%eax
13: 85 ff test %edi,%edi
15: 0f 45 c1 cmovne %ecx,%eax
18: c3 retq
Code generated after the patch was applied:
0: 0f bc cf bsf %edi,%ecx
3: 83 c1 02 add $0x2,%ecx
6: 85 ff test %edi,%edi
8: b8 01 00 00 00 mov $0x1,%eax
d: 0f 45 c1 cmovne %ecx,%eax
10: c3 retq
It seems we can still use cmove and save another 'test' instruction, but
that can be tackled separately.
Differential Revision: http://reviews.llvm.org/D11989
llvm-svn: 244947
We used to be over-conservative about preserving inbounds. Actually, the second
GEP (which applies the constant offset) can inherit the inbounds attribute of
the original GEP, because the resultant pointer is equivalent to that of the
original GEP. For example,
x = GEP inbounds a, i+5
=>
y = GEP a, i // inbounds removed
x = GEP inbounds y, 5 // inbounds preserved
llvm-svn: 244937
DeadStoreElimination does eliminate a store if it stores a value which was loaded from the same memory location.
So far this worked only if the store is in the same block as the load.
Now we can also handle stores which are in a different block than the load.
Example:
define i32 @test(i1, i32*) {
entry:
%l2 = load i32, i32* %1, align 4
br i1 %0, label %bb1, label %bb2
bb1:
br label %bb3
bb2:
; This store is redundant
store i32 %l2, i32* %1, align 4
br label %bb3
bb3:
ret i32 0
}
Differential Revision: http://reviews.llvm.org/D11854
llvm-svn: 244901
Consider this code:
BB:
%i = phi i32 [ 0, %if.then ], [ %c, %if.else ]
%add = add nsw i32 %i, %b
...
In this common case the add can be moved to the %if.else basic block, because
adding zero is an identity operation. If we go though %if.then branch it's
always a win, because add is not executed; if not, the number of instructions
stays the same.
This pattern applies also to other instructions like sub, shl, shr, ashr | 0,
mul, sdiv, div | 1.
Patch by Jakub Kuderski!
llvm-svn: 244887
simplified form to remove redundant checks and simplify the code for
popcount recognition. We don't actually need to handle all of these
cases.
I've left a FIXME for one in particular until I finish inspecting to
make sure we don't actually *rely* on the predicate in any way.
llvm-svn: 244879
Most SSE/AVX (non-constant) vector shift instructions only use the lower 64-bits of the 128-bit shift amount vector operand, this patch calls SimplifyDemandedVectorElts to optimize for this.
I had to refactor some of my recent InstCombiner work on the vector shifts to avoid quite a bit of duplicate code, it means that SimplifyX86immshift now (re)decodes the type of shift.
Differential Revision: http://reviews.llvm.org/D11938
llvm-svn: 244872
Summary: This patch moves the check of OptimizeForSize before traversing over all basic blocks in current loop. If OptimizeForSize is set to true, no non-trivial unswitch is ever allowed. Therefore, the early exit will help reduce compilation time. This patch should be NFC.
Reviewers: reames, weimingz, broune
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11997
llvm-svn: 244868
code into methods on LoopIdiomRecognize.
This simplifies the code somewhat and also makes it much easier to move
the analyses around. Ultimately, the separate class wasn't providing
significant value over methods -- it contained the precondition basic
block and the current loop. The current loop is already available and
the precondition block wasn't needed everywhere and is easy to pass
around.
In several cases I just moved things to be static functions because they
already accepted most of their inputs as arguments.
This doesn't fix the way we manage analyses yet, that will be the next
patch, but it already makes the code over 50 lines shorter.
No functionality changed.
llvm-svn: 244851
complexity.
There is only one function that was called from multiple locations, and
that was 'getBranch' which has a reasonable one-line spelling already:
dyn_cast<BranchInst>(BB->getTerminator). We could make this shorter, but
it doesn't seem to add much value. Instead, we should avoid calling it
so many times on the same basic blocks, but that will be in a subsequent
patch.
The other functions are only called in one location, so inline them
there, and take advantage of this to use direct early exit and reduce
indentation. This makes it much more clear what is being tested for, and
in fact makes it clear now to me that there are simpler ways to do this
work. However, this patch just does the mechanical inlining. I'll clean
up the functionality of the code to leverage loop simplified form more
effectively in a follow-up.
Despite lots of early line breaks due to early-exit, this is still
shorter than it was before.
llvm-svn: 244841
a significant code cleanup here.
The handling of analyses in this pass is overly complex and can be
simplified significantly, but the right way to do that is to simplify
all of the code not just the analyses, and that'll require pretty
extensive edits that would be noisy with formatting changes mixed into
them.
llvm-svn: 244828
To be clear: this is an *optimization* not a correctness change.
CodeGenPrep likes to duplicate icmps feeding branch instructions to take advantage of x86's ability to fuze many comparison/branch patterns into a single micro-op and to reduce the need for materializing i1s into general registers. PlaceSafepoints likes to place safepoint polls right at the end of basic blocks (immediately before terminators) when inserting entry and backedge safepoints. These two heuristics interact in a somewhat unfortunate way where the branch terminating the original block will be controlled by a condition driven by unrelocated pointers. This forces the register allocator to keep both the relocated and unrelocated values of the pointers feeding the icmp alive over the safepoint poll.
One simple fix would have been to just adjust PlaceSafepoints to move one back in the basic block, but you can reach similar cases as a result of LICM or other hoisting passes. As a result, doing a post insertion fixup seems to be more robust.
I considered doing this in CodeGenPrep itself, but having to update the live sets of already rewritten safepoints gets complicated fast. In particular, you can't just use def/use information because by moving the icmp, we're extending the live range of it's inputs potentially.
Instead, this patch teaches RewriteStatepointsForGC to make the required adjustments before making the relocations explicit in the IR. This change really highlights the fact that RSForGC is a CodeGenPrep-like pass which is performing target specific lowering. In the long run, we may even want to combine the two though this would require a lot more smarts to be integrated into RSForGC first. We currently rely on being able to run a set of cleanup passes post rewriting because the IR RSForGC generates is pretty damn ugly.
Differential Revision: http://reviews.llvm.org/D11819
llvm-svn: 244821
When rewriting the IR such that base pointers are available for every live pointer, we potentially need to duplicate instructions to propagate the base. The original code had only handled PHI and Select under the belief those were the only instructions which would need duplicated. When I added support for vector instructions, I'd added a collection of hacks for ExtractElement which caught most of the common cases. Of course, I then found the one test case my hacks couldn't cover. :)
This change removes all of the early hacks for extract element. By defining extractelement as a BDV (rather than trying to look through it), we can extend the rewriting algorithm to duplicate the extract as needed. Note that a couple of peephole optimizations were left in for the moment, because while we now handle extractelement as a first class citizen, we're not yet handling insertelement. That change will follow in the near future.
llvm-svn: 244808
AliasAnalysis.
Same as the other commits, the TLI access from an alias analysis is
going away and isn't very clean -- it is better to explicitly mark the
dependencies.
llvm-svn: 244785
just depend on it directly.
This was particularly frustrating because there was a really wide
mixture of using a member variable and re-extracting it from the AA that
happened to be around. I think the result is much more clear.
I've also deleted all of the pointless null checks and used references
across the APIs where I could to make it explicit that this cannot be
null in a useful fashion.
llvm-svn: 244780
r243382 changed the behavior to always require a set of memchecks to be
passed to LoopVer. This change restores the prior behavior as an
alternative to the new behavior. This allows the checks to be
implicitly taken from the LAA object.
Patch by Ashutosh Nema!
llvm-svn: 244763
As discussed in D11886, this patch moves the SSE/AVX vector blend folding to instcombiner from PerformINTRINSIC_WO_CHAINCombine (which allows us to remove this completely).
InstCombiner already had partial support for this, I just had to add support for zero (ConstantAggregateZero) masks and also the case where both selection inputs were the same (allowing us to ignore the mask).
I also moved all the relevant combine tests into InstCombine/blend_x86.ll
Differential Revision: http://reviews.llvm.org/D11934
llvm-svn: 244723
`InstCombiner::OptimizeOverflowCheck` was asserting an
invariant (operands to binary operations are ordered by decreasing
complexity) that wasn't really an invariant. Fix this by instead having
`InstCombiner::OptimizeOverflowCheck` establish the invariant if it does
not hold.
llvm-svn: 244676
Summary: This patch adds check for dead blocks and skip them for processSwitchInst(). This will help reduce compilation time.
Reviewers: reames, hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11953
llvm-svn: 244656
Summary: LowerSwitch crashed with the attached test case after deleting the default block. This happened because the current implementation of deleting dead blocks is wrong. After the default block being deleted, it contains no instruction or terminator, and it should no be traversed anymore. However, since the iterator is advanced before processSwitchInst() function is executed, the block advanced to could be deleted inside processSwitchInst(). The deleted block would then be visited next and crash dyn_cast<SwitchInst>(Cur->getTerminator()) because Cur->getTerminator() returns a nullptr. This patch fixes this problem by recording dead default blocks into a list, and delete them after all processSwitchInst() has been done. It still possible to visit dead default blocks and waste time process them. But it is a compile time issue, and I plan to have another patch to add support to skip dead blocks.
Reviewers: kariddi, resistor, hans, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11852
llvm-svn: 244642
Summary:
For LTO we need to enable this pass in the LTO pipeline,
as it is skipped during the "-flto -c" compile step (when PrepareForLTO is
set).
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11919
llvm-svn: 244622
The select pattern recognition in ValueTracking (as used by InstCombine
and SelectionDAGBuilder) only knew about integer patterns. This teaches
it about minimum and maximum operations.
matchSelectPattern() has been extended to return a struct containing the
existing Flavor and a new enum defining the pattern's behavior when
given one NaN operand.
C minnum() is defined to return the non-NaN operand in this case, but
the idiomatic C "a < b ? a : b" would return the NaN operand.
ARM and AArch64 at least have different instructions for these different cases.
llvm-svn: 244580
This adds somewhat basic preparation functionality including:
- Formation of funclets via coloring basic blocks.
- Cloning of polychromatic blocks to ensure that funclets have unique
program counters.
- Demotion of values used between different funclets.
- Some amount of cleanup once we have removed predecessors from basic
blocks.
- Verification that we are left with a CFG that makes some amount of
sense.
N.B. Arguments and numbering still need to be done.
Differential Revision: http://reviews.llvm.org/D11750
llvm-svn: 244558
This patch and a relatec clang patch solve the problem of having to explicitly enable analysis when specifying a loop hint pragma to get the diagnostics. Passing AlwasyPrint as the pass name (see below) causes the front-end to print the diagnostic if the user has specified '-Rpass-analysis' without an '=<target-pass>’. Users of loop hints can pass that compiler option without having to specify the pass and they will get diagnostics for only those loops with loop hints.
llvm-svn: 244555
Teresa Johnson