Doesn't really matter in practice but that's how the nodes are
normally created by SelectionDAGBuilder. So we should match.
Found by temporarily hacking type checks into isel table.
This is the type declared in X86InstrFragmentsSIMD.td. ISel pattern
matching doesn't check so it doesn't matter in practice. Maybe for
SelectionDAG CSE it would matter.
Different training algorithms may produce models that, besides the main
policy output (i.e. inline/don't inline), produce additional outputs
that are necessary for the next training stage. To facilitate this, in
development mode, we require the training policy infrastructure produce
a description of the outputs that are interesting to it, in the form of
a JSON file. We special-case the first entry in the JSON file as the
inlining decision - we care about its value, so we can guide inlining
during training - but treat the rest as opaque data that we just copy
over to the training log.
Differential Revision: https://reviews.llvm.org/D85674
When diffing disassembly dump of two binaries, I see lots of noises from mismatched jump target addresses and global data references, which unnecessarily causes diffs on every function, making it impractical. I'm trying to symbolize the raw binary addresses to minimize the diff noise.
In this change, a local branch target is modeled as a label and the branch target operand will simply be printed as a label. Local labels are collected by a separate pre-decoding pass beforehand. A global data memory operand will be printed as a global symbol instead of the raw data address. Unfortunately, due to the way the disassembler is set up and to be less intrusive, a global symbol is always printed as the last operand of a memory access instruction. This is less than ideal but is probably acceptable from checking code quality point of view since on most targets an instruction can have at most one memory operand.
So far only the X86 disassemblers are supported.
Test Plan:
llvm-objdump -d --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
mov eax, dword ptr [rsp]
cmp eax, dword ptr [rip + 4112] # 202182 <g>
jge 0x20117e <_start+0x25>
call 0x201158 <foo>
inc dword ptr [rsp]
jmp 0x201169 <_start+0x10>
xor eax, eax
pop rcx
ret
```
llvm-objdump -d **--symbolize-operands** --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
<L1>:
mov eax, dword ptr [rsp]
cmp eax, dword ptr <g>
jge <L0>
call <foo>
inc dword ptr [rsp]
jmp <L1>
<L0>:
xor eax, eax
pop rcx
ret
```
Note that the jump instructions like `jge 0x20117e <_start+0x25>` without this work is printed as a real target address and an offset from the leading symbol. With a change in the optimizer that adds/deletes an instruction, the address and offset may shift for targets placed after the instruction. This will be a problem when diffing the disassembly from two optimizers where there are unnecessary false positives due to such branch target address changes. With `--symbolize-operand`, a label is printed for a branch target instead to reduce the false positives. Similarly, the disassemble of PC-relative global variable references is also prone to instruction insertion/deletion.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D84191
While the original implementation added in D85787 / ae7f08812e
is not incorrect, it is known to be suboptimal.
In particular, it is not incorrect to use the basic block
in which the original `insertvalue` instruction is located
as the merge point, that is not necessarily optimal,
as `@test6` shows.
We should look at all the AggElts, and, if they are all defined
in the same basic block, then that is the basic block we should use.
On RawSpeed library, this catches +4% (+50) more cases.
On vanilla LLVM test-suits, this catches +12% (+92) more cases.
In a following patch, UseBB will be detected later,
so capturing it is potentially error-prone (capture by ref vs by val).
Also, parametrized UseBB will likely be needed
for multiple levels of PHI indirections later on anyways.
This is NFC at the moment, because right now we always insert the PHI
into the same basic block in which the original `insertvalue` instruction
is, but that will change.
Also, fixes addition of the suffix to the value names.
Some of the lower implementations were relying on this, however the
type was not set depending on which form .lower* helper form you were
using. For instance, if you used an unconditonal lower(), the type was
never set. Most of the lower actions do not benefit from a type
parameter, and just expand in terms of the original operation's types.
However, some lowerings could benefit from an additional type hint to
combine a promotion and an expansion. An example of this is for
add/sub sat. The DAG integer legalization tries to use smarter
expansions directly when promoting the integer type, and doesn't
always produce the same instruction with a wider type.
Treat this as an optional hint argument, that only means something for
specific lower actions. It may be useful to generalize this mechanism
to pass a full list of type indexes and desired types, but I haven't
run into a case like that yet.
SUMMARY:
1. This patch provided API for decoding the traceback table info and unit test for the these API.
2. Another patchs will do the following things:
2.1 added a new option --traceback-table to decode the trace back table information for xcoff object file when
using llvm-objdump to disassemble the xcoff objfile.
2.2 print out the traceback table information for llvm-objdump.
Reviewers: Jason liu, Hubert Tong, James Henderson
Differential Revision: https://reviews.llvm.org/D81585
The "isa" checks were less constrained because they allow
target constants, but the later matching code would bail
out on those anyway, so this should be slightly more
efficient.
this bug was causing miscompile.
now clang cant properly selfhost with -mllvm --enable-knowledge-retention
Reviewed By: jdoerfert, lebedev.ri
Differential Revision: https://reviews.llvm.org/D83507
The previous implementation was incorrect, and based off incorrect
instruction definitions. Unfortunately we can't match natural
addressing in a lot of cases due to the shift/scale applied in
getelementptrs. This relies on reducing the 64-bit shift to 32-bits.
... if the collected file doesn't exists.
This fixes the situation where LLDB can't create a file when capturing a
reproducer because the parent path doesn't exist, but can during replay
because the file collector created the directory hierarchy even though
the file doesn't exist.
This is covered by the lldb reproducer test suite.
isWriteAtEndOfFunction needs to check all memory uses of Def, which is
much more expensive than getting the underlying objects in practice.
Switch the call order, as recommended by the TODO, which was added as
per an earlier review.
This shaves off a bit of compile-time.
Currently the code does not account for the fact that getDomMemoryDef
can be called with ScanLimit == 0, if we reached the limit while
processing an earlier access. Also tighten the check a bit more and bump
the scan limit now that it is handled properly.
In some cases, this brings a 2x speedup in terms of compile-time.
We may have an SGPR->VGPR copy if a totally uniform pointer
calculation is used for a VGPR pointer operand.
Also hack around a bug in MUBUF matching which would incorrectly use
MUBUF for global when flat was requested. This should really be a
predicate on the parent pattern, but the DAG always checked this
manually inside the complex pattern.
If the same stream object is used for multiple compiles, the PAL metadata from eariler compilations will leak into later one. See https://github.com/GPUOpen-Drivers/llpc/issues/882 for how this is happening in LLPC.
No tests were added because multiple compiles will have to happen using the same pass manager, and I do not see a setup for that on the LLVM side. Let me know if there is a good way to test this.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D85667
Existing implementation always aborts on syntax errors in a DataLayout
description. While this is meaningful for consuming textual IR modules, it is
inconvenient for users that may need fine-grained control over the layout from,
e.g., command-line options. Propagate errors through the parsing functions and
only abort in the top-level parsing function instead.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D85650
The functions `__register_frame`/`__deregister_frame` are not
available on z/OS, so add a guard to not use them.
Reviewed By: lhames, abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D84787
The RISC-V Privileged Specification 1.11 defines `mcountinhibit`, which
has the same numeric CSR value as `mucounteren` from 1.09.1. This patch
enables the use of the old `mucounteren` name.
Patch by Yuichi Sugiyama.
Reviewed By: lenary, jrtc27, pzheng
Differential Revision: https://reviews.llvm.org/D85067
This fixes the "Unable to insert indirect branch" fatal error sometimes
seen when generating position-independent code.
Patch by msizanoen1
Reviewed By: jrtc27
Differential Revision: https://reviews.llvm.org/D84833
The current demand propagator for addition will mark all input bits at and right of the alive output bit as alive. But carry won't propagate beyond a bit for which both operands are zero (or one/zero in the case of subtraction) so a more accurate answer is possible given known bits.
I derived a propagator by working through truth tables and using a bit-reversed addition to make demand ripple to the right, but I'm not sure how to make a convincing argument for its correctness in the comments yet. Nevertheless, here's a minimal implementation and test to get feedback.
This would help in a situation where, for example, four bytes (<128) packed into an int are added with four others SIMD-style but only one of the four results is actually read.
Known A: 0_______0_______0_______0_______
Known B: 0_______0_______0_______0_______
AOut: 00000000001000000000000000000000
AB, current: 00000000001111111111111111111111
AB, patch: 00000000001111111000000000000000
Committed on behalf of: @rrika (Erika)
Differential Revision: https://reviews.llvm.org/D72423
Perform lowerShuffleWithVPMOV as part of the v16i8/v8i16 shuffle lowering stages, which are the only types that are currently supported.
We need to expand support for lowering shuffles as truncations to fix the remaining regressions in D66004
Support f128 using VE instructions. Update regression tests.
I've noticed there is no load or store i128 test, so I add them too.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D86035
With gcc 6.3.0, I hit the following compilation bug.
../lib/Transforms/InstCombine/InstCombineVectorOps.cpp:937:2: error: extra ‘;’ [-Werror=pedantic]
};
^
cc1plus: all warnings being treated as errors
The error is introduced by Commit ae7f08812e ("[InstCombine]
Aggregate reconstruction simplification (PR47060)")
If we can't identify alloca used in lifetime marker we
need to assume to worst case scenario.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D84630
This pattern happens in clang C++ exception lowering code, on unwind branch.
We end up having a `landingpad` block after each `invoke`, where RAII
cleanup is performed, and the elements of an aggregate `{i8*, i32}`
holding exception info are `extractvalue`'d, and we then branch to common block
that takes extracted `i8*` and `i32` elements (via `phi` nodes),
form a new aggregate, and finally `resume`'s the exception.
The problem is that, if the cleanup block is effectively empty,
it shouldn't be there, there shouldn't be that `landingpad` and `resume`,
said `invoke` should be a `call`.
Indeed, we do that simplification in e.g. SimplifyCFG `SimplifyCFGOpt::simplifyResume()`.
But the thing is, all this extra `extractvalue` + `phi` + `insertvalue` cruft,
while it is pointless, does not look like "empty cleanup block".
So the `SimplifyCFGOpt::simplifyResume()` fails, and the exception is has
higher cost than it could have on unwind branch :S
This doesn't happen *that* often, but it will basically happen once per C++
function with complex CFG that called more than one other function
that isn't known to be `nounwind`.
I think, this is a missing fold in InstCombine, so i've implemented it.
I think, the algorithm/implementation is rather self-explanatory:
1. Find a chain of `insertvalue`'s that fully tell us the initializer of the aggregate.
2. For each element, try to find from which aggregate it was extracted.
If it was extracted from the aggregate with identical type,
from identical element index, great.
3. If all elements were found to have been extracted from the same aggregate,
then we can just use said original source aggregate directly,
instead of re-creating it.
4. If we fail to find said aggregate when looking only in the current block,
we need be PHI-aware - we might have different source aggregate when coming
from each predecessor.
I'm not sure if this already handles everything, and there are some FIXME's,
i'll deal with all that later in followups.
I'd be fine with going with post-commit review here code-wise,
but just in case there are thoughts, i'm posting this.
On RawSpeed, for example, this has the following effect:
```
| statistic name | baseline | proposed | Δ | % | abs(%) |
|---------------------------------------------------|---------:|---------:|------:|--------:|-------:|
| instcombine.NumAggregateReconstructionsSimplified | 0 | 1253 | 1253 | 0.00% | 0.00% |
| simplifycfg.NumInvokes | 948 | 1355 | 407 | 42.93% | 42.93% |
| instcount.NumInsertValueInst | 4382 | 3210 | -1172 | -26.75% | 26.75% |
| simplifycfg.NumSinkCommonCode | 574 | 458 | -116 | -20.21% | 20.21% |
| simplifycfg.NumSinkCommonInstrs | 1154 | 921 | -233 | -20.19% | 20.19% |
| instcount.NumExtractValueInst | 29017 | 26397 | -2620 | -9.03% | 9.03% |
| instcombine.NumDeadInst | 166618 | 174705 | 8087 | 4.85% | 4.85% |
| instcount.NumPHIInst | 51526 | 50678 | -848 | -1.65% | 1.65% |
| instcount.NumLandingPadInst | 20865 | 20609 | -256 | -1.23% | 1.23% |
| instcount.NumInvokeInst | 34023 | 33675 | -348 | -1.02% | 1.02% |
| simplifycfg.NumSimpl | 113634 | 114708 | 1074 | 0.95% | 0.95% |
| instcombine.NumSunkInst | 15030 | 14930 | -100 | -0.67% | 0.67% |
| instcount.TotalBlocks | 219544 | 219024 | -520 | -0.24% | 0.24% |
| instcombine.NumCombined | 644562 | 645805 | 1243 | 0.19% | 0.19% |
| instcount.TotalInsts | 2139506 | 2135377 | -4129 | -0.19% | 0.19% |
| instcount.NumBrInst | 156988 | 156821 | -167 | -0.11% | 0.11% |
| instcount.NumCallInst | 1206144 | 1207076 | 932 | 0.08% | 0.08% |
| instcount.NumResumeInst | 5193 | 5190 | -3 | -0.06% | 0.06% |
| asm-printer.EmittedInsts | 948580 | 948299 | -281 | -0.03% | 0.03% |
| instcount.TotalFuncs | 11509 | 11507 | -2 | -0.02% | 0.02% |
| inline.NumDeleted | 97595 | 97597 | 2 | 0.00% | 0.00% |
| inline.NumInlined | 210514 | 210522 | 8 | 0.00% | 0.00% |
```
So we manage to increase the amount of `invoke` -> `call` conversions in SimplifyCFG by almost a half,
and there is a very apparent decrease in instruction and basic block count.
On vanilla llvm-test-suite:
```
| statistic name | baseline | proposed | Δ | % | abs(%) |
|---------------------------------------------------|---------:|---------:|------:|--------:|-------:|
| instcombine.NumAggregateReconstructionsSimplified | 0 | 744 | 744 | 0.00% | 0.00% |
| instcount.NumInsertValueInst | 2705 | 2053 | -652 | -24.10% | 24.10% |
| simplifycfg.NumInvokes | 1212 | 1424 | 212 | 17.49% | 17.49% |
| instcount.NumExtractValueInst | 21681 | 20139 | -1542 | -7.11% | 7.11% |
| simplifycfg.NumSinkCommonInstrs | 14575 | 14361 | -214 | -1.47% | 1.47% |
| simplifycfg.NumSinkCommonCode | 6815 | 6743 | -72 | -1.06% | 1.06% |
| instcount.NumLandingPadInst | 14851 | 14712 | -139 | -0.94% | 0.94% |
| instcount.NumInvokeInst | 27510 | 27332 | -178 | -0.65% | 0.65% |
| instcombine.NumDeadInst | 1438173 | 1443371 | 5198 | 0.36% | 0.36% |
| instcount.NumResumeInst | 2880 | 2872 | -8 | -0.28% | 0.28% |
| instcombine.NumSunkInst | 55187 | 55076 | -111 | -0.20% | 0.20% |
| instcount.NumPHIInst | 321366 | 320916 | -450 | -0.14% | 0.14% |
| instcount.TotalBlocks | 886816 | 886493 | -323 | -0.04% | 0.04% |
| instcount.TotalInsts | 7663845 | 7661108 | -2737 | -0.04% | 0.04% |
| simplifycfg.NumSimpl | 886791 | 887171 | 380 | 0.04% | 0.04% |
| instcount.NumCallInst | 553552 | 553733 | 181 | 0.03% | 0.03% |
| instcombine.NumCombined | 3200512 | 3201202 | 690 | 0.02% | 0.02% |
| instcount.NumBrInst | 741794 | 741656 | -138 | -0.02% | 0.02% |
| simplifycfg.NumHoistCommonInstrs | 14443 | 14445 | 2 | 0.01% | 0.01% |
| asm-printer.EmittedInsts | 7978085 | 7977916 | -169 | 0.00% | 0.00% |
| inline.NumDeleted | 73188 | 73189 | 1 | 0.00% | 0.00% |
| inline.NumInlined | 291959 | 291968 | 9 | 0.00% | 0.00% |
```
Roughly similar effect, less instructions and blocks total.
See also: rGe492f0e03b01a5e4ec4b6333abb02d303c3e479e.
Compile-time wise, this appears to be roughly geomean-neutral:
http://llvm-compile-time-tracker.com/compare.php?from=39617aaed95ac00957979bc1525598c1be80e85e&to=b59866cf30420da8f8e3ca239ed3bec577b23387&stat=instructions
And this is a win size-wize in general:
http://llvm-compile-time-tracker.com/compare.php?from=39617aaed95ac00957979bc1525598c1be80e85e&to=b59866cf30420da8f8e3ca239ed3bec577b23387&stat=size-text
See https://bugs.llvm.org/show_bug.cgi?id=47060
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D85787
We can now enable this for AVX1 targets can now assist with canonicalizeShuffleMaskWithHorizOp cleanup.
There's still a few missed opportunities for merging subvector insert/extracts into shuffles, but they shouldn't cause any regressions now.
Instead of just attempting to fold shuffle(HOP,HOP) for a specific target shuffle, make this part of combineX86ShufflesRecursively so we can perform this on the combined shuffle chain, which is particularly useful for recognising more cases of where we're performing multiple HOPs that can be merged and pre-AVX where we don't have good blend/unary target shuffle support.
Split the isRepeatedTargetShuffleMask into a wrapper variant that takes a MVT describing the mask width, and an internal version that just needs the raw mask element bit size.
This will be necessary for an upcoming change where the horizontal ops element width might not match the shuffle mask element width.
This change added a new inline advisor that takes optimization remarks from previous inlining as input, and provides the decision as advice so current inlining can replay inline decisions of a different compilation. Dwarf inline stack with line and discriminator is used as anchor for call sites including call context. The change can be useful for Inliner tuning as it provides a channel to allow external input for tweaking inline decisions. Existing alternatives like alwaysinline attribute is per-function, not per-callsite. Per-callsite inline intrinsic can be another solution (not yet existing), but it's intrusive to implement and also does not differentiate call context.
A switch -sample-profile-inline-replay=<inline_remarks_file> is added to hook up the new inline advisor with SampleProfileLoader's inline decision for replay. Since SampleProfileLoader does top-down inlining, inline decision can be specialized for each call context, hence we should be able to replay inlining accurately. However with a bottom-up inliner like CGSCC inlining, the replay can be limited due to lack of specialization for different call context. Apart from that limitation, the new inline advisor can still be used by regular CGSCC inliner later if needed for tuning purpose.
This is a resubmit of https://reviews.llvm.org/D83743
MachOLinkGraphBuilder has been treating these as hidden, but they should be
treated as local.
Symbols with N_PEXT set and N_EXT unset are produced when hidden symbols are
run through 'ld -r' without passing -keep_private_externs. They will show up
under 'nm -m' as "was private extern", hence the name of the test cases.
Testcase commited as relocatable object to ensure that the test suite doesn't
depend on having 'ld -r' available.
This cleans up copies that the legalizer or other combines leave around. They
can occasionally end up escaping as moves.
Differential Revision: https://reviews.llvm.org/D85964
This was always set to 0. Use a default value of 0 in this context to
satisfy the instruction definition patterns. We can't unconditionally
use SLC with a default value of 0 due to limitations in TableGen's
handling of defaulted operands when followed by non-default operands.
The VGPR component is a 32-bit offset, not 64-bits.
I'm not sure what the correct syntax is for this. This maintains the
vaddr position and leaves saddr in the end "off" position. This is
particularly terrible for stores, since the operand order is now <vgpr
offset>, <data>, <sgpr base>, splitting the pointer operands. I
suppose this is a logical consequence from the mistake of not putting
the data operand first. I'm not sure what sp3 does.
This was only used for matching the saddr addressing mode of global
instructions, but this was not implemented correctly. The instruction
definitions aren't even correct, and are defined as using a 64-bit
VGPR component. Eliminate this pass to enable correcting the
instruction definitions. A new matching implementation can work in
GlobalISel or relying on DAG divergence information for the base
address.
When adding elements when iterating, the iterator will become
valid, which could cause errors. This fixes the issue by using
indexes instead of iterator.
This patch internalize non-exact functions and replaces of their uses
with the internalized version. Doing this enables the analysis of
non-exact functions.
We can do this because some non-exact functions with the same name
whose linkage is `linkonce_odr` or `weak_odr` should have the same
semantics, so we can safely internalize and replace use of them (the
result of the other version of this function should be the same.).
Note that not all functions can be internalized, e.g., function with
`linkonce` or `weak` linkage.
For now when specified in commandline, we internalize all functions
that meet the requirements without calculating the cost of such
internalzation.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84167
This reverts commit 6dbf0cfcf7.
That commit caused failed assertions, e.g. like this:
$ cat sprintf-strcpy.c
char *ptr; void func(void) { ptr += sprintf(ptr, "%s", ""); }
$ clang -c sprintf-strcpy.c -O2 -target x86_64-linux-gnu
clang: ../lib/IR/Value.cpp:473: void llvm::Value::doRAUW(llvm::Value*,
llvm::Value::ReplaceMetadataUses): Assertion `New->getType() ==
getType() && "replaceAllUses of value with new value of different
type!"' failed.
This code becomes dead for valid IR after 48f4312 and a96fc46. The reason for the test change is that the verifier reports the first verification error encountered, in some non-specified visit order. By removing the verification code in gc.relocates for a statepoint with inline gc operands, I change the error the verifier reports. And in one case, the checked for error is no longer possible with the bundle representation, so I simply delete the file.
The "gc-live" operand bundles were recently added, and all tests have been updated to use that format. A migration period was provided, though it's worth noting these intrinsics are experimental, so formally there is no compatibile requirement.
This is an extension to a96fc46. "gc-live" hadn't been implemented at the point that patch was initially posted.
It did not process hazard for ds_permute because it does not
load or store even though it is DS.
Differential Revision: https://reviews.llvm.org/D86003
Transformation creates big strings for big C values, so bail out for C > 128.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86004
This would be a problem if the entire instrumented function was a call
to
e.g. memcpy
Use FnPrologueEnd Instruction* instead of ActualFnStart BB*
Differential Revision: https://reviews.llvm.org/D86001
(Forgot to land this a couple of weeks back.)
In a recent series of changes, I've introduced support for using the respective operand bundle kinds on the statepoint. At the moment, code supports either/or, but there's no need to keep the old support around. For the moment, I am simply changing the specification and verifier to require zero length argument sets in the intrinsic.
The intrinsic itself is experimental. Given that, there's no forward serialization needed. The in tree uses and generation have already been updated to use the new operand bundle based forms, the only folks broken by the change will be those with frontends generating statepoints directly and the updates should be easy.
Why not go ahead and just remove the arguments entirely? Well, I plan to. But while working on this I've found that almost all of the arguments to the statepoint can be expressed via operand bundles or attributes. Given that, I'm planning a radical simplification of the arguments and figured I'd do one update not several small ones.
Differential Revision: https://reviews.llvm.org/D80892
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
This allows us to add addtional instrumentation before the function start,
without splitting the first BB.
Differential Revision: https://reviews.llvm.org/D85985
Have the front-end use the `nounwind` attribute on atomic libcalls.
This prevents us from seeing `invoke __atomic_load` in MSAN, which
is problematic as it has no successor for instrumentation to be added.
A unique module id, which is a part of sinit and sterm function names, is
necessary to be unique. However, `getUniqueModuleId` will fail if there is
no strong external symbol within a module. We turn to use Pid and timestamp
when this happens.
Differential Revision: https://reviews.llvm.org/D85527
This avoid GUID lookup in Index.findSummaryInModule.
Follow up for D81242.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D85269
Define the platform ID = 10, and simple mappings between platform ID & name.
Reviewed By: MaskRay, cishida
Differential Revision: https://reviews.llvm.org/D85594
These should really match either G_BUILD_VECTOR or
G_BUILD_VECTOR_TRUNC, but there doesn't seem to be an existing
mechanism for matching alternative opcodes. There is GIM_SwitchOpcode,
but it seems to assume it's oly only used for matcher optimization.
I could also omit any opcode check and rely on the matcher directly
checking the opcode, but the table optimizer currently assumes there
has to be an opcode check.
Also doesn't try to handle undef elements like the DAG version.
This is beginning to look like a canonicalization stage that could be performed as part of shuffle combining
Another step towards PR41813
Recommit of rG9bd97d036398 with fixed offset adjustments
Unfortunately this ends up not working as expected on targets with
16-bit operations due to AMDGPUCodeGenPrepare's promotion of uniform
16-bit ops to i32.
The vector case annoyingly requires switching the checked opcode,
since constants for vectors aren't directly handled.
I also need to think more carefully about whether this is valid for i1.
Extend FixupStatepointCallerSaved pass with ability to spill
statepoint GC pointer arguments (optionally allowing them on CSRs).
Special handling is required for invoke statepoints, because at MI
level single landing pad may be shared by multiple statepoints, so
we must ensure we spill landing pad's live-ins into the same stack
slots.
Full statepoint refactoring change set is available at D81603.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D81647
Remove I8/I16 register classes which are prepared to implement previously
to implement VE ABI. However, it is possible to implement VE ABI correctly
without them. Therefore, removing them now.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D85905
This loop caused me a little headache once, because I didn't see the assigned variable is a member. The refactored version appears more readable to me.
Differential Revision: https://reviews.llvm.org/D85922
PAL recently got support for multiple ELF sections and relocations,
therefore we can now use .rodata sections instead of forcing constants
into .text.
Differential Revision: https://reviews.llvm.org/D85895
The code wasn't taking into account that the two operands
passed to ptest could be identical and was trying to erase
them twice.
Differential Revision: https://reviews.llvm.org/D85892
When getUserCost was transitioned to use an explicit CostKind,
TCK_CodeSize was used even though the original kind was implicitly
SizeAndLatency so restore this behaviour. We now only query for
CodeSize when optimising for minsize.
I expect this to not change anything as, I think all, targets will
currently return the same value for CodeSize and SizeLatency. Indeed
I see no changes in the test suite for Arm, AArch64 and X86.
Differential Revision: https://reviews.llvm.org/D85829
dumpStringOffsetsSection() expects the size of a contribution to be
correctly aligned. The patch adds the corresponding verifications for
pre-v5 cases.
Differential Revision: https://reviews.llvm.org/D85739
This lets us support the scenario where a binary is linked from a mix
of object files with both instrumented and non-instrumented globals.
This is likely to occur on Android where the decision of whether to use
instrumented globals is based on the API level, which is user-facing.
Previously, in this scenario, it was possible for the comdat from
one of the object files with non-instrumented globals to be selected,
and since this comdat did not contain the note it would mean that the
note would be missing in the linked binary and the globals' shadow
memory would be left uninitialized, leading to a tag mismatch failure
at runtime when accessing one of the instrumented globals.
It is harmless to include the note when targeting a runtime that does
not support instrumenting globals because it will just be ignored.
Differential Revision: https://reviews.llvm.org/D85871
This patch restricts the behaviour of referencing via .Lfoo$local
local aliases, introduced in https://reviews.llvm.org/D73230, to
STV_DEFAULT globals only.
Hidden symbols via --fvisiblity=hidden (https://gcc.gnu.org/wiki/Visibility)
is an important scenario.
Benefits:
- Improves the size of object files by using fewer STT_SECTION symbols.
- The code reads a bit better (it was not obvious to me without going
back to the code reviews why the canBenefitFromLocalAlias function
currently doesn't consider visibility).
- There is also a side benefit in restoring the effectiveness of the
--wrap linker option and making the behavior of --wrap consistent
between LTO and normal builds for references within a translation-unit.
Note: this --wrap behavior (which is specific to LLD) should not be
considered reliable. See comments on https://reviews.llvm.org/D73230
for more.
Differential Revision: https://reviews.llvm.org/D85782
Previously ConstantFoldExtractElementInstruction() would only work with
insertelement instructions, not contants. This properly handles
insertelement constants as well.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85865
If we need a scratch register for the spill don't use the same scratch
register that is being used for the MBUF offset.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D85772
Allow inlining only when the Callee has a subset of the Caller's
features. In principle, we should be able to inline regardless of any
features because WebAssembly supports features at module granularity,
not function granularity, but without this restriction it would be
possible for a module to "forget" about features if all the functions
that used them were inlined.
Requested in PR46812.
Differential Revision: https://reviews.llvm.org/D85494
This change moves elfabi related code to llvm/InterfaceStub library
so it can be shared by multiple llvm tools without causing cyclic
dependencies.
Differential Revision: https://reviews.llvm.org/D85678
Refactoring function `writeArchive` in ArchiveWriter. Added a new
function `writeArchiveBuffer` that returns the archive in a memory
buffer instead of writing it out to the disk. This refactor is necessary
so as to allow `llvm-libtool-darwin` to write universal files containing
archives.
Reviewed by jhenderson, MaskRay, smeenai
Differential Revision: https://reviews.llvm.org/D84858
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
These operations take Qda and Rn register operands, which are
commutative so long as the instruction is not predicated.
Differential Revision: https://reviews.llvm.org/D85813
This is a fixup to commit 43bdac2906, to make sure the
address space from the original load pointer is retained in the
vector pointer.
Resolves problem with
Assertion `castIsValid(op, S, Ty) && "Invalid cast!"' failed.
due to address space mismatch.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D85912
InstCombine adds users of transformed instruction to working list to
process on the same iteration. However gc.relocate may have a hidden
user (next gc.relocate) which is connected through gc.statepoint intrinsic and
there is no direct def-use chain between them.
In this case if the next gc.relocation is already processed it will not be added
to worklist and will not be able to be processed on the same iteration.
Let's we have the following case:
A = gc.relocate(null)
B = statepoint(A)
C = gc.relocate(B, hidden(A))
If C is already considered then after replacement of A with null, statepoint B
instruction will be added to the queue but not C.
C can be processed only on the next iteration.
If the chain of relocation is pretty long the many iteration may be required.
This change is to reduce the number of iteration to meet the latest changes
related to reducing infinite loop threshold.
This is a quick (not best) fix. In the follow up patches I plan to move gc relocation
handling into statepoint handler. This should also help to remove unused gc live
entries in statepoint bundle.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D75598
If the referenced symbol of a J[U]MP_SLOT is invalid (e.g. symbol index 0), llvm-objdump -d will bail out:
```
error: 'a': st_name (0x326600) is past the end of the string table of size 0x7
```
where 0x326600 is the st_name field of the first entry past the end of .symtab
Change it to a warning to continue dumping.
`X86/plt.test` uses a prebuilt executable, so I pick `ELF/AArch64/plt.test`
which has a YAML input and can be easily modified.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85623
When removing instructions from unreachable blocks, and only debug info
intrinsics were removed, InstCombine could incorrectly return a false
Modified status.
This is fixed by making removeAllNonTerminatorAndEHPadInstructions()
also return how many debug info intrinsics that were removed, and take
that into account.
This was caught using the check introduced by D80916.
Reviewed By: majnemer
Differential Revision: https://reviews.llvm.org/D85839
SIPreEmitPeephole does not process all terminators, which means
it can fail to handle SI_RETURN_TO_EPILOG if immediately preceeded
by a branch to the early exit block.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D85872
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
This patch changes SplitVecOp_EXTRACT_VECTOR_ELT to work correctly
for scalable vectors and also fixes an a bug in DAGCombiner where
the scalable property is dropped in visitTRUNCATE when attempting
to fold an extract + a truncate.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85754
We are re-using tryToMergePartialOverlappingStores, which requires
earlier to domiante Later. In the long run,
tryToMergeParialOverlappingStores should be re-written using MemorySSA.
Fixes PR46513.
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
This change replaces the InitialLength of pub-tables with Format and
Length. All the InitialLength fields have been removed.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85880
In DAGTypeLegalizer::GenWidenVectorStores the algorithm assumes it only
ever deals with fixed width types, hence the offsets for each individual
store never take 'vscale' into account. I've changed the main loop in
that function to use TypeSize instead of unsigned for tracking the
remaining store amount and offset increment. In addition, I've changed
the loop to use the new IncrementPointer helper function for updating
the addresses in each iteration, since this handles scalable vector
types.
Whilst fixing this function I also fixed a minor issue in
IncrementPointer whereby we were not adding the no-unsigned-wrap flag
for the add instruction in the same way as the fixed width case does.
Also, I've added a report_fatal_error in GenWidenVectorTruncStores,
since this code currently uses a sequence of element-by-element scalar
stores.
I've added new tests in
CodeGen/AArch64/sve-intrinsics-stores.ll
CodeGen/AArch64/sve-st1-addressing-mode-reg-imm.ll
for the changes in GenWidenVectorStores.
Differential Revision: https://reviews.llvm.org/D84937
In narrowExtractedVectorLoad there is an optimisation that tries to
combine extract_subvector with a narrowing vector load. At the moment
this produces warnings due to the incorrect calls to
getVectorNumElements() for scalable vector types. I've got this
working for scalable vectors too when the extract subvector index
is a multiple of the minimum number of elements. I have added a
new variant of the function:
MachineFunction::getMachineMemOperand
that copies an existing MachineMemOperand, but replaces the pointer
info with a null version since we cannot currently represent scaled
offsets.
I've added a new test for this particular case in:
CodeGen/AArch64/sve-extract-subvector.ll
Differential Revision: https://reviews.llvm.org/D83950
This reverts commit e441b7a7a0.
This patch causes a compile error in tensorflow opensource project. The stack trace looks like:
Point of crash:
llvm/include/llvm/Analysis/LoopInfoImpl.h : line 35
(gdb) ptype *this
type = const class llvm::LoopBase<llvm::BasicBlock, llvm::Loop> [with BlockT = llvm::BasicBlock, LoopT = llvm::Loop]
(gdb) p *this
$1 = {ParentLoop = 0x0, SubLoops = std::vector of length 0, capacity 0, Blocks = std::vector of length 0, capacity 1,
DenseBlockSet = {<llvm::SmallPtrSetImpl<llvm::BasicBlock const*>> = {<llvm::SmallPtrSetImplBase> = {<llvm::DebugEpochBase> = {Epoch = 3}, SmallArray = 0x1b2bf6c8, CurArray = 0x1b2bf6c8,
CurArraySize = 8, NumNonEmpty = 0, NumTombstones = 0}, <No data fields>}, SmallStorage = {0xfffffffffffffffe, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}, IsInvalid = true}
(gdb) p *this->DenseBlockSet->CurArray
$2 = (const void *) 0xfffffffffffffffe
I will try to get a case from tensorflow or use creduce to get a small case.
The method optionMatches() constructs 9865 std::string instances when comparing different
options. Many of these instances exceed the size of the internal storage and force memory
allocations. This patch adds an early exit check that eliminates most of the string allocations
while keeping the code simple.
Example inputs:
Prefix: /, Name: Fr
Prefix: -, Name: Fr
Prefix: -, Name: fsanitize-address-field-padding=
Prefix: -, Name: fsanitize-address-globals-dead-stripping
Prefix: -, Name: fsanitize-address-poison-custom-array-cookie
Prefix: -, Name: fsanitize-address-use-after-scope
Prefix: -, Name: fsanitize-address-use-odr-indicator
Prefix: -, Name: fsanitize-blacklist=
Differential Revision: D85538
From the code after the 'break', they are processing 64bit scalar and
vector bitcast. So I think the break-condition should be (cond1 || cond2)
This means we only execute following code if (64bit and dest-is-vector).
Also remove a previous fix which is not needed with this new fix.
(introduced in: 1349a04ef5)
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D85804
This patch implements the builtins for the vector shifts (shl, srl, sra), and
adds the appropriate test cases for these builtins. The builtins utilize the
vector shift instructions introduced within ISA 3.1.
Differential Revision: https://reviews.llvm.org/D83338
This is a retry of rL300977 which was reverted because of infinite loops.
We have fixed all of the known places where that would happen, but there's
still a chance that this patch will cause infinite loops.
This matches the demanded bits behavior in the DAG and should fix:
https://bugs.llvm.org/show_bug.cgi?id=32706
Differential Revision: https://reviews.llvm.org/D32255
These are not correctness issues.
In visitUDivOperand(), if the (potential) divisor is undef, then udiv is
already UB, so it is not incorrect to keep undef as shift amount.
But, that is suboptimal.
We could instead simply drop that select, picking the other operand.
Afterwards, getLogBase2() could assert that there is no undef in divisor.
While x*undef is undef, shift-by-undef is poison,
which we must avoid introducing.
Also log2(iN undef) is *NOT* iN undef, because log2(iN undef) u< N.
See https://bugs.llvm.org/show_bug.cgi?id=47133
Testing is performed when targeting 128, 256 and 512-bit wide vectors.
For 128-bit vectors, the original behavior of using NEON instructions is
preserved.
Differential Revision: https://reviews.llvm.org/D85479
This is mostly a straight port from SelectionDAG. We re-use the actual bit-test
analysis part from SwitchLoweringUtils, which was factored out earlier to
support jump-tables.
Differential Revision: https://reviews.llvm.org/D85233
This recommits the following patches now that D85684 has landed
1cf6f210a2 [IR] Disable select ? C : undef -> C fold in ConstantFoldSelectInstruction unless we know C isn't poison.
469da663f2 [InstSimplify] Re-enable select ?, undef, X -> X transform when X is provably not poison
122b0640fc [InstSimplify] Don't fold vectors of partial undef in SimplifySelectInst if the non-undef element value might produce poison
ac0af12ed2 [InstSimplify] Add test cases for opportunities to fold select ?, X, undef -> X when we can prove X isn't poison
9b1e95329a [InstSimplify] Remove select ?, undef, X -> X and select ?, X, undef -> X transforms
Similar to the Two op + select patterns that were added recently, this
adds some patterns for select + fma to turn them into predicated
operations.
Differential Revision: https://reviews.llvm.org/D85824
Pull out element equivalence code from isShuffleEquivalent/isTargetShuffleEquivalent, I've also removed many of the index modulos where possible.
First step toward simply adding some additional equivalence tests.
We need to produce a setcc instruction which has an 8-bit result.
This gets rid of a bunch of cases that were using the s1->s8/s16/s32/s64
handling in selectZExt.
I'm not very familiar with GlobalISel yet so I'm not yet sure
the best way to do things. I'd especially like feedback on the
best way to handle the currently split 32-bit and 64-bit mode
handling.
Differential Revision: https://reviews.llvm.org/D85814
Commit 9385aaa848 ("[sancov] Fix PR33732") added zeroext to
__sanitizer_cov_trace(_const)?_cmp[1248] parameters for x86_64 only,
however, it is useful on other targets, in particular, on SystemZ: it
fixes swap-cmp.test.
Therefore, use it on all targets. This is safe: if target ABI does not
require zero extension for a particular parameter, zeroext is simply
ignored. A similar change has been implemeted as part of commit
3bc439bdff ("[MSan] Add instrumentation for SystemZ"), and there were
no problems with it.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D85689
Widen the scope of memory operations that are allowed to be tail predicated
to include gathers and scatters, such that loops that are auto-vectorized
with the option -enable-arm-maskedgatscat (and actually end up containing
an MVE gather or scatter) can be tail predicated.
Differential Revision: https://reviews.llvm.org/D85138
This patch makes the 'AddrSize' field optional. If the address size is
missing, yaml2obj will infer it from the object file.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85805
On z/OS, the information is stored in the Common System Data Area
(CSD). It is the number of CPs allocated to the current LPAR.
Reviewers: aganea, hubert.reinterpertcast, MaskRay
Reviewed By: hubert.reinterpertcast
Differential Revision: https://reviews.llvm.org/D85531
When TTI was updated to use an explicit cost, TCK_CodeSize was used
although the default implicit cost would have been the hand-wavey
cost of size and latency. So, revert back to this behaviour. This is
not expected to have (much) impact on targets since most (all?) of
them return the same value for SizeAndLatency and CodeSize.
When optimising for size, the logic has been changed to query
CodeSize costs instead of SizeAndLatency.
This patch also adds a testing option in the unroller so that
OptSize thresholds can be specified.
Differential Revision: https://reviews.llvm.org/D85723
When visiting load and store instructions in SROA skip scalable vectors.
This is relevant in the implementation of the 'arm_sve_vector_bits'
attribute that is used to define VLS types, where an alloca of a
fixed-length vector could be bitcasted to scalable. See D85128 for more
information.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85725
Now that SCEVExpander can preserve LCSSA form,
we do not have to worry about LCSSA form when
trying to look through PHIs. SCEVExpander will take
care of inserting LCSSA PHI nodes as required.
This increases precision of the analysis in some cases.
Reviewed By: mkazantsev, bmahjour
Differential Revision: https://reviews.llvm.org/D71539
Note that DWARFUnit::getAbbreviations() returns nullptr if the
abbreviations could not be read, but callers used the returned
pointer without checking.
Differential Revision: https://reviews.llvm.org/D85738
This pick ups the work on the overflow checks for get.active.lane.mask,
which ensure that it is safe to insert the VCTP intrinisc that enables
tail-predication. For a 2d auto-correlation kernel and its inner loop j:
M = Size - i;
for (j = 0; j < M; j++)
Sum += Input[j] * Input[j+i];
For this inner loop, the SCEV backedge taken count (BTC) expression is:
(-1 + (sext i16 %Size to i32)),+,-1}<nw><%for.body>
and LoopUtil cannotBeMaxInLoop couldn't calculate a bound on this, thus "BTC
cannot be max" could not be determined. So overflow behaviour had to be assumed
in the loop tripcount expression that uses the BTC. As a result
tail-predication had to be forced (with an option) for this case.
This change solves that by using ScalarEvolution's helper
getConstantMaxBackedgeTakenCount which is able to determine the range of BTC,
thus can determine it is safe, so that we no longer need to force tail-predication
as reflected in the changed test cases.
Differential Revision: https://reviews.llvm.org/D85737
In this patch I have fixed two issues:
1. Our SVE tuple get/set intrinsics were using the wrong constant type
for the index passed to EXTRACT_SUBVECTOR. I have fixed this by using the
function SelectionDAG::getVectorIdxConstant to create the value. Also, I
have updated the documentation for EXTRACT_SUBVECTOR describing what type
the constant index should be and we now enforce this when creating the
node.
2. The AArch64 backend was missing the appropriate patterns for
extracting certain subvectors (nxv4f16 and nxv2f32) from legal SVE types.
I have added them as part of this patch.
The only way that I could find to test the new patterns was to use the
SVE tuple get intrinsics, although I realise it looks a bit unusual.
Tests added here:
test/CodeGen/AArch64/sve-extract-subvector.ll
Differential Revision: https://reviews.llvm.org/D85516
VE has only 64 bits AND/OR/XOR instructions. We pretended that VE has 32 bits
instructions also, but doing it increase the number of generated instructions.
Therefore, we decide to promote 32 bits operations and use only 64 bits
instructions in back end. We also avoid pretending that VE has 32 bits LEA
instruction. Update regression tests also.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D85726
SUBREG_TO_REG is supposed to be used when we know the producing
instruction already zeroed the bits we're extending. But that's
not the case here. So INSERT_SUBREG with an IMPLICIT_DEF is the
correct thing to use.
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Based on post-commit discussion in D81766, Hexagon sets this to "0".
I'll see if I can come up with a test, but making the obvious
code fix first to unblock that target.
Rather than just saying that some feature is missing, report the exact
features to make the error message more useful and actionable.
Differential Revision: https://reviews.llvm.org/D85795
When turning on -debug-info-kind=constructor we ran into a "fragment covers
entire variable" error during thinlto. The fragment is currently always
emitted if there is no type size, but sometimes the variable has a
forward declared struct type which doesn't have a size.
This changes the code to get the type size from the GlobalVariable instead.
Differential Revision: https://reviews.llvm.org/D85572
Without this patch, we attempt to distribute And over Xor even in
unsafe circumstances like so:
undef & (true ^ true) ==> (undef & true) ^ (undef & true)
and evaluate it to undef instead of false. Note that "true ^ true"
may show up implicitly with one true being part of a PHI node.
This patch fixes the problem by teaching SimplifyUsingDistributiveLaws
to not use undef as part of simplifications.
Reviewers: spatel, aqjune, nikic, lebedev.ri, fhahn, jdoerfert
Differential Revision: https://reviews.llvm.org/D85687
Introduce a helper on Instruction which can be used to update the debug
location after hoisting.
Use this in GVN and LICM, where we were mistakenly introducing new line
0 locations after hoisting (the docs recommend dropping the location in
this case).
For more context, see the discussion in https://reviews.llvm.org/D60913.
Differential Revision: https://reviews.llvm.org/D85670
Similar to what we do in IIQ, add an isUndefValue() helper that
checks for undef values while respective CanUseUndef. This makes
it much easier to search for places that don't respect the flag
yet.
The officially specified abbreviation for WebAssembly is Wasm and the
spec explicitly calls out WASM as being an incorrect spelling. This
patch fixes a few comments and error messages to use the
spec-compliant abbreviation.
Differential Revision: https://reviews.llvm.org/D85764
SUMMARY:
1. in the patch , remove setting storageclass in function .getXCOFFSection and construct function of class MCSectionXCOFF
there are
XCOFF::StorageMappingClass MappingClass;
XCOFF::SymbolType Type;
XCOFF::StorageClass StorageClass;
in the MCSectionXCOFF class,
these attribute only used in the XCOFFObjectWriter, (asm path do not need the StorageClass)
we need get the value of StorageClass, Type,MappingClass before we invoke the getXCOFFSection every time.
actually , we can get the StorageClass of the MCSectionXCOFF from it's delegated symbol.
2. we also change the oprand of branch instruction from symbol name to qualify symbol name.
for example change
bl .foo
extern .foo
to
bl .foo[PR]
extern .foo[PR]
3. and if there is reference indirect call a function bar.
we also add
extern .bar[PR]
Reviewers: Jason liu, Xiangling Liao
Differential Revision: https://reviews.llvm.org/D84765
This implements
```
(logic_op (op x...), (op y...)) -> (op (logic_op x, y))
```
when `op` is an extend, a shift, or an and.
This is similar to `DAGCombiner::hoistLogicOpWithSameOpcodeHands`
(with a bunch of missing cases, e.g. G_TRUNC, G_BITCAST, etc.)
This is implemented so it works both pre and post-legalization.
This also adds a general way to add a series of instructions in a combine.
(`applyBuildInstructionSteps`).
Differential Revision: https://reviews.llvm.org/D85050
This is the replacement for D84250 based on D84792. As we recursively
fold with the same value twice, we need to disable undef folds,
to prevent an undef from being folded to two different values.
Reverting rG00f3579aea6e3d4a4b7464c3db47294f71cef9e4 and using the
test case from https://reviews.llvm.org/D83360#2145793, it no longer
performs the incorrect fold.
Differential Revision: https://reviews.llvm.org/D85684
The following issues are addressed in this patch.
1. The operands of DW_LNE_set_discriminator should be an ULEB128 number
rather than an address.
2. Test the emitted opcodes.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85717
I think this is the last remaining translation of an existing
instcombine transform for the corresponding cmp+sel idiom.
This interpretation is more general though - we can remove
mismatched signed/unsigned combinations in addition to the
more obvious cases.
min/max(X, Y) must produce X or Y as the result, so this is
just another clause in the existing transform that was already
matching a min/max of min/max.
Allow the GNU .debug_macro extension to be emitted for DWARF versions
earlier than 5. The extension is basically what became DWARF 5's format,
except that a DW_AT_GNU_macros attribute is emitted, and some entries
like the strx entries are missing. In this patch I emit GNU's indirect
entries, which are the same as DWARF 5's strp entries.
This patch adds the extension behind a hidden LLVM flag,
-use-gnu-debug-macro. I would later want to enable it by default when
tuning for GDB and targeting DWARF versions earlier than 5.
The size of a Clang 8.0 binary built with RelWithDebInfo and the flags
"-gdwarf-4 -fdebug-macro" reduces from 1533 MB to 1349 MB with
.debug_macro (compared to 1296 MB without -fdebug-macro).
Reviewed By: SouraVX, dblaikie
Differential Revision: https://reviews.llvm.org/D82975
Broken out from a review comment on D82975. This is an NFC expect for
that the Macinfo macro string is now emitted using a single emitBytes()
invocation, so it can be done using a single string directive.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D83557
Currently, the line table uses the first compilation unit's address size
as its address size. It's not the right behavior. The address size should be
inferred from the target machine.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85707
This mirrors the support for the equivalent extracts. This also
creates a huge mess that would be greatly improved if we had any bit
operation combines.
ISD::ATOMIC_STORE arbitrarily has the operands in the opposite order
from regular ISD::STORE, which always introduced an annoying
duplication of patterns to handle both cases. Since in GlobalISel
there's just the one G_STORE, we need to swap the operands to
correctly emit the type check for the pointer operand.
Some work started in 20aafa3156 to
migrate SelectionDAG to use ISD::STORE for atomics, but that work
seems to have stalled. Since this is the pretty much the last
operation which matters which isn't supported for AMDGPU, use this
compatibility hack to unblock declaring it functionally complete.
Not sure what's going on with the pending_phis AArch64 test. It seems
it didn't always use atomics, and I'm not sure what it was originally
testing matters anymore.
These definitions are needed by any file which uses gtest. Previously we
were adding them in the add_unittest function, but over time we've
accumulated libraries (which don't go through add_unittest) building on
gtest and this has resulted in proliferation of the definitions.
Making this a part of the library interface enables them to be managed
centrally. This follows a patch for -Wno-suggest-override (D84554) which
took a similar approach.
Differential Revision: https://reviews.llvm.org/D84748
This is the max version of D85046.
This change causes binary changes in 44 out of 237 benchmarks (out of
MultiSource/SPEC2000/SPEC2006)
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D85189
When the result type of insertelement needs to be split,
SplitVecRes_INSERT_VECTOR_ELT will try to store the vector to a
stack temporary, store the element at the location of the stack
temporary plus the index, and reload the Lo/Hi parts.
This patch does the following to ensure this works for scalable vectors:
- Sets the StackID with getStackIDForScalableVectors() in CreateStackTemporary
- Adds an IsScalable flag to getMemBasePlusOffset() and scales the
offset by VScale when this is true
- Ensures the immediate is clamped correctly by clampDynamicVectorIndex
so that we don't try to use an out of range index
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D84874
Allow the GNU .debug_macro extension to be parsed and printed by
llvm-dwarfdump. In an upcoming patch support will be added for emitting
that format also.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D82974
Move the Dwarf version checks that determine if the .debug_macro section
should be emitted, into a DwarfDebug member. This is a preparatory
refactoring for allowing the GNU .debug_macro extension, which is a
precursor to the DWARF 5 format, to be emitted by LLVM for earlier DWARF
versions.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D82971
Changes the Offset arguments to both functions from int64_t to TypeSize
& updates all uses of the functions to create the offset using TypeSize::Fixed()
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85220
Change bitreverse/bswap/ctlz/ctpop/cttz regression tests to support i128
and signext/zeroext i32 types. This patch also change the way to support
i32 types using 64 bits VE instructions.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D85712
These are useful instructions when lowering fixed length vector
extends, so I've broken this patch out as kind of NFC like work.
Differential Revision: https://reviews.llvm.org/D85546
Adds the binary format goff and the operating system zos to the triple
class. goff is selected as default binary format if zos is choosen as
operating system. No further functionality is added.
Reviewers: efriedma, tahonermann, hubert.reinterpertcast, MaskRay
Reviewed By: efriedma, tahonermann, hubert.reinterpertcast
Differential Revision: https://reviews.llvm.org/D82081
The entries in VectorizableTree are not necessarily ordered by their
position in basic blocks. Collect them and order them by dominance so
later instructions are guaranteed to be visited first. For instructions
in different basic blocks, we only scan to the beginning of the block,
so their order does not matter, as long as all instructions in a basic
block are grouped together. Using dominance ensures a deterministic order.
The modified test case contains an example where we compute a wrong
spill cost (2) without this patch, even though there is no call between
any instruction in the bundle.
This seems to have limited practical impact, .e.g on X86 with a recent
Intel Xeon CPU with -O3 -march=native -flto on MultiSource,SPEC2000,SPEC2006
there are no binary changes.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D82444
SCEVExpander already tracks which instructions have been inserted n
InsertedValues/InsertedPostIncValues. This patch adds an additional
vector to collect the instructions in insertion order. This can then be
used to remove exactly the instructions inserted by the expander.
This replaces ExpandedValuesCleaner, which in some cases might remove
values not inserted by the expander (e.g. if a value was dead before
insertion and is then used during expansion).
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D84327
We skip debug instructions in RDA so we cannot attempt to look them
up in our instruction map without causing a crash. But some of the
methods select the last instruction in the block and this
instruction may be a debug instruction... So, use getLastNonDebugInstr
instead of calling back on a MachineBasicBlock.
MachineBasicBlock iterators have also been updated to use
instructionsWithoutDebug so we can avoid the manual checks for debug
instructions.
Differential Revision: https://reviews.llvm.org/D85658
This patch makes getEdgeValueLocal more precise when a freeze instruction is
given, by adding support for freeze into constantFoldUser
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84629
This patch enables `AAValueSimplify` to use information from `AAPotentialValues`
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85668
By factoring out the end of tryVPTERNLOG, we can use the same code
to directly match X86ISD::VPTERNLOG. This allows us to remove
around 3-4K worth of X86GenDAGISel.inc.
When we use mask compare intrinsics under strict FP option, the masked
elements shouldn't raise any exception. So, we cann't replace the
intrinsic with a full compare + "and" operation.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D85385
This patch refactors the DWARF section dumpers. When dumping a DWARF
section, if the DWARF parser fails to parse the section, we will dump it
as a raw content section. This patch also fixes a bug in
DWARFYAML::Data::isEmpty(). Finally, a test case that tests dumping the
__debug_aranges section is added.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D85506
Replace the `ident_t` handling in Clang with the methods offered by the
OMPIRBuilder. This cuts down on the clang code as well as the
differences between the two, making further transitions easier. Tests
have changed but there should not be a real functional change. The most
interesting difference is probably that we stop generating local ident_t
allocations for now and just use globals. Given that this happens only
with debug info, the location part of the `ident_t` is probably bigger
than the test anyway. As the location part is already a global, we can
avoid the allocation, memcpy, and store in favor of a constant global
that is slightly bigger. This can be revisited if there are
complications.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D80735
Summary:
Use TE SMC instead of TC SMC in large code model mode,
so that large code model TOC entries could get placed after all
the small code model TOC entries, which reduces the chance of TOC overflow.
Reviewed By: Xiangling_L
Differential Revision: https://reviews.llvm.org/D85455
In cases where MachineOutliner candidates either are:
* noreturn
* have calls with no available LR or free regs
* Don't use SP
we can end up hitting stack fixup code for the caller and the callee for
a FrameID of MachineOutlinerDefault. This triggers the assert:
`assert(OF.FrameConstructionID != MachineOutlinerDefault &&
"Can only fix up stack references once");`
in AArch64InstrInfo.cpp. This assert exists for now because a lot of the
fixup code is not tested to handle fixing up more than once and needs
some better checks and enhancements to avoid potentially generating
illegal code.
I've filed a Bugzilla report to track this until these cases are handled
by the AArch64 MachineOutliner: https://bugs.llvm.org/show_bug.cgi?id=46767
This diff detects cases that will cause these multiple stack fixups and
prune the Candidates from `RepeatedSequenceLocs`.
Differential Revision: https://reviews.llvm.org/D83923
for invoke instructions.
We see a warning of "No debug information found in function foo: Function
profile not used" in a case. The function foo is called by an invoke
instruction. It has no debug information because it has attribute((nodebug))
in the definition. It shouldn't have profile instance in the sample profile
but compiler thinks it does, that turns out to be a compiler bug in
findCalleeFunctionSamples. The bug is exposed when sample-profile-merge-inlinee
is enabled recently.
Currently in findCalleeFunctionSamples, CalleeName is unset and is empty for
invoke instruction. For empty CalleeName, findFunctionSamplesAt will treat
the call as an indirect call and will return any inline instance profile at
the same location as the instruction. That leads to a wrong profile being
returned to function foo.
The patch set CalleeName when the instruction is an invoke.
Differential Revision: https://reviews.llvm.org/D85664
Constant fold both the trapping and saturating versions of the
WebAssembly truncation intrinsics. The tests are adapted from the
WebAssembly spec tests for the corresponding instructions.
Requested in PR46982.
Differential Revision: https://reviews.llvm.org/D85392
SplitKit forms invalid COPY subreg bundles without a leading
BUNDLE instruction. That manifests itself in post-RA scheduler
counting instruction and asserting on "Instruction count mismatch".
The bundle shall be undone by VirtRegRewriter::expandCopyBundle(),
but it does not because VirtRegRewriter::handleIdentityCopy() can
turn COPY bundle into a KILL bundle.
Process KILLs as well.
Differential Revision: https://reviews.llvm.org/D85484
This can fold the immediate into the physical destination, but this
should not look for further users of the register. Fixes regression
introduced by 766cb615a3.
This patch adds the missing information to the LF_BUILDINFO record, which allows for rebuilding a .CPP without any external dependency but the .OBJ itself (other than the compiler).
Some external tools that we are using (Recode, Live++) are extracting the information to reproduce a build without any knowledge of the build system. The LF_BUILDINFO stores a full path to the compiler, the PWD (CWD at program startup), a relative or absolute path to the TU, and the full CC1 command line. The command line needs to be freestanding (not depend on any environment variables). In the same way, MSVC doesn't store the provided command-line, but an expanded version (somehow their equivalent of CC1) which is also freestanding.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
X86 is the only user of this interface in tree. Previously the
X86 pass would loop over operands looking for one undef operand for
the pass to fix. But there could theoretically be multiple operands
to fix. So it makes more sense for the pass to do the looping and
ask the target if an operand needs to be fixed.
This allows us to subsequently configure the logger for the case when we
use a model evaluator and want to log additional outputs.
Differential Revision: https://reviews.llvm.org/D85577
A GlobalAlias is an address-taken user of its aliased function.
canRenameComdatFunc has excluded such cases.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D85597
If a shuffle is referring to both the lower and upper half lanes of an unary horizontal op, then canonicalize the mask to only refer to the lower half.
Summary:
AIX assembler does not generate correct relocation when .rename
appear between tc entry label and .tc directive.
So only emit .rename after .tc/.comm or other linkage is emitted.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D85317
On the frontend side, this patch recovers AIX static init implementation to
use the linkage type and function names Clang chooses for sinit related function.
On the backend side, this patch sets correct linkage and function names on aliases
created for sinit/sterm functions.
Differential Revision: https://reviews.llvm.org/D84534
Add a hidden option to the compiler to control a the PC Relative GOT indirect
linker optimization.
If this option is set to false the compiler will no loger produce the
relocations required by the linker to perform the optimization.
Reviewed By: nemanjai, NeHuang, #powerpc
Differential Revision: https://reviews.llvm.org/D85377
IT blocks with more than one instruction were performance deprecated in Armv8
but that doesn't mean we should follow that advise when optimising for size.
Differential Revision: https://reviews.llvm.org/D85638
Although the DWARF specification states that .debug_aranges entries
can't have length zero, these can occur in the wild. There's no
particular reason to enforce this part of the spec, since functionally
they have no impact. The patch removes the error and introduces a new
warning for premature terminator entries which does not stop parsing.
This is a relanding of cb3a598c87, adding the missing obj2yaml part
that was needed.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46805. See also
https://reviews.llvm.org/D71932 which originally introduced the error.
Reviewed by: ikudrin, dblaikie, Higuoxing
Differential Revision: https://reviews.llvm.org/D85313
Check that we're shuffling hadd/pack ops first before altering shuffle masks.
First step towards adding extra functionality, plus it avoids costly shuffle mask manipulation if not necessary.
Although the DWARF specification states that .debug_aranges entries
can't have length zero, these can occur in the wild. There's no
particular reason to enforce this part of the spec, since functionally
they have no impact. The patch removes the error and introduces a new
warning for premature terminator entries which does not stop parsing.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46805. See also
https://reviews.llvm.org/D71932 which originally introduced the error.
Reviewed by: ikudrin, dblaikie
Differential Revision: https://reviews.llvm.org/D85313
Instructions defined in the original inner loop preheader may depend on
values defined in the outer loop header, but the inner loop header will
become the entry block in the loop nest. Move the instructions from the
preheader to the outer loop header, so we do not break dominance. We
also have to check for unsafe instructions in the preheader. If there
are no unsafe instructions, all instructions should be movable.
Currently we move all instructions except the terminator and rely on
LICM to hoist out invariant instructions later.
Fixes PR45743
Values defined in the outer loop header could be used in the inner loop
latch. In that case, we need to create LCSSA phis for them, because after
interchanging they will be defined in the new inner loop and used in the
new outer loop.
This patch introduces two intrinsics: llvm.ppc.setflm and
llvm.ppc.readflm. They read from or write to FPSCR register
(floating-point status & control) which contains rounding mode and
exception status.
To ensure correctness of program, we need to prevent FP operations from
being moved across these intrinsics (mffs/mtfsf instruction), so here I
set them as scheduling boundaries. We can relax such restriction if
FPSCR is modeled well in the future.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D84914
As noticed on D66004, scalarization of an expandload with a constant mask as a chain of irregular loads+inserts makes it tricky to optimize before lowering, resulting in difficulties in merging loads etc.
This patch instead scalarizes the expansion to a build_vector(load0, load1, undef, load2,....) style pattern and then performs a blend shuffle with the pass through vector. This allows us to more easily make use of all the build_vector combines, merging of consecutive loads etc.
Differential Revision: https://reviews.llvm.org/D85416
This also fixes the condition in the assertion in
DwarfCompileUnit::getLabelBegin() because it checked something unrelated
to the returned value.
Differential Revision: https://reviews.llvm.org/D85437
This patch adds noundef to return value and arguments of standard I/O functions.
With this patch, passing undef or poison to the functions becomes undefined
behavior in LLVM IR. Since undef/poison is lowered from operations having UB in C/C++,
passing undef to them was already UB in source.
With this patch, the functions cannot return undef or poison anymore as well.
According to C17 standard, ungetc/ungetwc/fgetpos/ftell can generate unspecified
value; 3.19.3 says unspecified value is a valid value of the relevant type,
and using unspecified value is unspecified behavior, which is not UB, so it
cannot be undef (using undef is UB when e.g. it is used at branch condition).
— The value of the file position indicator after a successful call to the ungetc function for a text stream, or the ungetwc function for any stream, until all pushed-back characters are read or discarded (7.21.7.10, 7.29.3.10).
— The details of the value stored by the fgetpos function (7.21.9.1).
— The details of the value returned by the ftell function for a text stream (7.21.9.4).
In the long run, most of the functions listed in BuildLibCalls should have noundefs; to remove redundant diffs which will anyway disappear in the future, I added noundef to a few more non-I/O functions as well.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85345
Fix 64-bit copy to SCC by restricting the pattern resulting
in such a copy to subtargets supporting 64-bit scalar compare,
and mapping the copy to S_CMP_LG_U64.
Before introducing the S_CSELECT pattern with explicit SCC
(0045786f14), there was no need
for handling 64-bit copy to SCC ($scc = COPY sreg_64).
The proposed handling to read only the low bits was however
based on a false premise that it is only one bit that matters,
while in fact the copy source might be a vector of booleans and
all bits need to be considered.
The practical problem of mapping the 64-bit copy to SCC is that
the natural instruction to use (S_CMP_LG_U64) is not available
on old hardware. Fix it by restricting the problematic pattern
to subtargets supporting the instruction (hasScalarCompareEq64).
Differential Revision: https://reviews.llvm.org/D85207
Making use of undef is not safe if the simplification result is not used
to replace all uses of the result. This leads to problems in NewGVN,
which does not replace all uses in the IR directly. See PR33165 for more
details.
This patch adds an option to SimplifyQuery to disable the use of undef.
Note that I've only guarded uses if isa<UndefValue>/m_Undef where
SimplifyQuery is currently available. If we agree on the general
direction, I'll update the remaining uses.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D84792
Add support for (if enabled) splitting cold functions into a separate section
in order to further boost locality of hot code.
Authored by: rjf (Ruijie Fang)
Reviewed by: hiraditya,rcorcs,vsk
Differential Revision: https://reviews.llvm.org/D85331
This patch was adjusted to match the most basic pattern that starts with an insertelement
(so there's no extract created here). Hopefully, that removes any concern about
interfering with other passes. Ie, the transform should almost always be profitable.
We could make an argument that this could be part of canonicalization, but we
conservatively try not to create vector ops from scalar ops in passes like instcombine.
If the transform is not profitable, the backend should be able to re-scalarize the load.
Differential Revision: https://reviews.llvm.org/D81766
Currently the SCEVExpander tries to re-use existing casts, even if they
are not exactly at the insertion point it was asked to create the cast.
To do so in some case, it creates a new cast at the insertion point and
updates all users to use the new cast.
This behavior is problematic, because it changes the IR outside of the
instructions created during the expansion. Therefore we cannot
completely undo all changes made during expansion.
This re-use should be only an extra optimization, so only using the new
cast in the expanded instructions should not be a correctness issue.
There are many cases equivalent instructions are created during
expansion.
This patch also adjusts findInsertPointAfter to skip instructions
inserted during expansion. This enables re-using existing casts without
the renaming any uses, by picking a better insertion point.
Reviewed By: efriedma, lebedev.ri
Differential Revision: https://reviews.llvm.org/D84399
This adds patterns for v16i16's vecreduce, using all the existing code
to go via an i32 VADDV/VMLAV and truncating the result.
Differential Revision: https://reviews.llvm.org/D85452
This formats some of the MVE patterns, and adds a missing
Predicates = [HasMVEInt] to some VRHADD patterns I noticed
as going through. Although I don't believe NEON would ever
use the patterns (as it would use ADDL and VSHRN instead)
they should ideally be predicated on having MVE instructions.
These aren't the canonical forms we'd get from InstCombine, but
we do have X86 tests for them. Recognizing them is pretty cheap.
While there make use of APInt:isSignedMinValue/isSignedMaxValue
instead of creating a new APInt to compare with. Also use
SelectionDAG::getAllOnesConstant helper to hide the all ones
APInt creation.
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Fixes PR47040, in which an assertion was improperly triggered during
FastISel's address computation. The issue was that an `Address` set to
be relative to the FrameIndex with offset zero was incorrectly
considered to have an unset base. When the left hand side of an add
set the Address to be 0 off the FrameIndex, the right side would not
detect that the Address base had already been set and could try to set
the Address to be relative to a register instead, triggering an
assertion.
This patch fixes the issue by explicitly tracking whether an `Address`
has been set rather than interpreting an offset of zero to mean the
`Address` has not been set.
Differential Revision: https://reviews.llvm.org/D85581
This was blocking isTypeLegal call so that we could do a particular
transform on illegal types before type legalization. But the we
create a target specific node using that type. We shouldn't do
that if the type isn't legal. So I think we should just always
make sure the type is legal.
I suspect that in order to get the condition VT to not be a vector
of i1 we already completed type legalization anyway so this probably
doesn't matter much in practice.
This is just a thin wrapper around computeRegisterLivness which
we can just call directly. The only real difference is that
isSafeToClobberEFLAGS returns a bool and computeRegisterLivness
returns an enum. So we need to check for the specific enum value
that isSafeToClobberEFLAGS was hiding.
I've also adjusted which sites pass an explicit value for
Neighborhood since the default for computeRegisterLivness is 10.
I messed up the bug numbers in the commit message before
Previously this function searched 4 instructions forwards or
backwards to determine if it was ok to clobber eflags.
This is called in 3 places: rematerialization, turning 2 operand
leas into adds or splitting 3 ops leas into an lea and add on some
CPU targets.
This patch increases the search limit to 10 instructions for
rematerialization and 2 operand lea to add. I've left the old
treshold for 3 ops lea spliting as that increases code size.
Fixes PR47024 and PR46315.
Previously this function searched 4 instructions forwards or
backwards to determine if it was ok to clobber eflags.
This is called in 3 places: rematerialization, turning 2 operand
leas into adds or splitting 3 ops leas into an lea and add on some
CPU targets.
This patch increases the search limit to 10 instructions for
rematerialization and 2 operand lea to add. I've left the old
treshold for 3 ops lea spliting as that increases code size.
Fixes PR47024 and PR43014
SimplifyCFG has two main folds for resumes - one when resume is directly
using the landingpad, and the other one where resume is using a PHI node.
While for the first case, we were already correctly ignoring all the
PHI nodes, and both the debug info intrinsics and lifetime intrinsics,
in the PHI-based-one, we weren't ignoring PHI's in the resume block,
and weren't ignoring lifetime intrinsics. That is clearly a bug.
On RawSpeed library, this results in +9.34% (+81) more invoke->call folds,
-0.19% (-39) landing pads, -0.24% (-81) invoke instructions
but +51 call instructions and -132 basic blocks.
Though, the run-time performance impact appears to be within the noise.
Follow-up to D82716 / rGea71ba11ab11
We do not have the fabs removal fold in IR yet for the case
where the sqrt operand is repeated, so that's another potential
improvement.
This patch adds an optimization that folds select(freeze(icmp eq/ne x, y), x, y)
to x or y.
This was needed to resolve slowdown after D84940 is applied.
I tried to bake this logic into foldSelectInstWithICmp, but it wasn't clear.
This patch conservatively writes the pattern in a separate function,
foldSelectWithFrozenICmp.
The output does not need freeze; https://alive2.llvm.org/ce/z/X49hNE (from @nikic)
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D85533
Previously the transform was doing these two canonicalizations
(x > y) ? x : y -> (x >= y) ? x : y
(x < y) ? x : y -> (x <= y) ? x : y
But those don't seem to be useful generally. And they actively
pessimize the cases in PR47049.
This patch limits it to
(x > 0) ? x : 0 -> (x >= 0) ? x : 0
(x < -1) ? x : -1 -> (x <= -1) ? x : -1
These are the cases mentioned in the comments as the motivation
for the canonicalization. These allow the CMOV to use the S
flag from the compare thus improving opportunities to use a TEST
or the flags from an arithmetic instruction.
In D85499, I attempted to fix this same issue by canonicalizing
andnp for i1 vectors, but since there was some opposition to such
a change, this commit just fixes the bug by using two different
forms depending on which kind of vector type is in use. We can
then always decide to switch the canonical forms later.
Description of the original bug:
We have a DAG combine that tries to fold (vselect cond, 0000..., X) -> (andnp cond, x).
However, it does so by attempting to create an i64 vector with the number
of elements obtained by truncating division by 64 from the bitwidth. This is
bad for mask vectors like v8i1, since that division is just zero. Besides,
we don't want i64 vectors anyway. For i1 vectors, switch the pattern
to (andnp (not cond), x), which is the canonical form for `kandn`
on mask registers.
Fixes https://github.com/JuliaLang/julia/issues/36955.
Differential Revision: https://reviews.llvm.org/D85553
If OptNoneInstrumentation prints it instead, 'Skipping pass' will print for even required passes.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D85493
The history of dropTriviallyDeadConstantArrays is like this. Because the appending linkage uses too much memory (http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20150105/251381.html), dropTriviallyDeadConstantArrays was introduced (https://reviews.llvm.org/rG81f385b0c6ea37dd7195a65be162c75bbdef29d2) to release unused constant arrays. Recently, dropTriviallyDeadConstantArrays was improved (https://reviews.llvm.org/rG81f385b0c6ea37dd7195a65be162c75bbdef29d2) to reduce its quadratic cost.
Our recent LTO profiling shows that when a target is large, 15-20% of time cost is from the SetVector::insert called by dropTriviallyDeadConstantArrays.
A large application has hundreds or thousands of modules; each module calls dropTriviallyDeadConstantArrays once for cleaning up tens of thousands of ConstantArrays a module has. In those ConstantArrays, usually around 5 can be deleted; a very very few deleted ConstantArrays reference other ConstantArrays: less than 10 out of millions.
Given this, the cost of SetVector::insert is mainly from the construction of WorkList from ArrayConstants. This motivated the fix that iterates ArrayConstants directly, and uses WorkList only when necessary.
Our evaluation shows that
1) The cumulative time percentage of dropTriviallyDeadConstantArrays is reduced from 15-17% to 4-6%.
2) For targets with LTO time > 20min, the time reduction is about 20%.
3) No observable performance impact for build without using LTO.
{F12506218}
{F12506221}
Reviewed By: mehdi_amini, tejohnson, jdoerfert
Differential Revision: https://reviews.llvm.org/D85379
Regions are sometimes skipped which should be rescheduled without memory op
clustering. RegionIdx is not incremented when iterating over regions that
are flagged to be skipped, causing the index to be incorrect.
Thanks to Vang Thao for discovering this bug!
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D85498
No verification for pass mangers since it is not needed.
No verification for skipped loop pass since the asserted condition is not used.
Add a BeforeNonSkippedPass callback for this. The callback needs more
inputs than its parameters to work so the callback is added on-the-fly.
Reviewed By: aeubanks, asbirlea
Differential Revision: https://reviews.llvm.org/D84977
This reverts commit b497665d98.
Spent some time trying to reproduce this locally, reverting in a
desparate attempt to fix the sanitizer buildbot:
- http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux/builds/28828
I don't know exactly why or how this patch breaks the bots, but it seems
pretty concrete that it's the culprit.
This patch adds the instruction definitions and assembly/disassembly tests for
the following set of instructions:
Vector Extract [byte | half | word | doubleword | quad] with mask
Vector Expand [byte | half | word | doubleword | quad] with mask
Move to VSR [byte | byte immediate | half | word | doubleword | quad] with mask
Vector Count Mask Bits [byte | half | word | doubleword]
Differential Revision: https://reviews.llvm.org/D83724
Introduce a fatal error if any thread local storage code is compiled
using pc relative memory operations as well as a hidden override
option `-enable-ppc-pcrel-tls` so that this support can be incrementally
added if possible.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D85448
As mentioned on D85463, we should be using SimplifyMultipleUseDemandedBits (which is the default fallback).
The minor regression in illegal-bitfield-loadstore.ll will be addressed properly by D77804.
Change to expand MULHU/MULHS/UMUL_LOHI/SMUL_LOHI for i32 and i64 since
those instructions are not available on Aurora SX VE. Some of them
are used in expansion of i128 multiply, so need to modify them to
support i128. Then, update basic arithmetic regression tests of
i128 and signed/unsigned i32 typed integer values.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D85490
This removes members of the DIEUnit class which were used only in unit
tests. Note also that child classes shadowed some of these methods,
namely, getDwarfVersion() was overridden in DwartfUnit and getLength()
was overridden in DwarfCompileUnit.
Differential Revision: https://reviews.llvm.org/D85436
This is a split patch of D80991.
This patch introduces AAPotentialValues and its interface only.
For more detail of AAPotentialValues abstract attribute, see the original patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D83283
Fixed an incorrect pattern in lib/Target/AArch64/AArch64SVEInstrInfo.td
for storing out <vscale x 2 x f32> unpacked scalable vectors. Added
a couple of tests to
test/CodeGen/AArch64/sve-st1-addressing-mode-reg-imm.ll
Differential Revision: https://reviews.llvm.org/D85441
This patch implements the function prototypes vec_extractl and vec_extracth in altivec.h to utilize the vector extract double element instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D84622
If it is load cluster, we don't need to create the dependency edges(SUb->reg) from SUb to SUa
as they both depend on the base register "reg"
+-------+
+----> reg |
| +---+---+
| ^
| |
| |
| |
| +---+---+
| | SUa | Load 0(reg)
| +---+---+
| ^
| |
| |
| +---+---+
+----+ SUb | Load 4(reg)
+-------+
But if it is store cluster, we need to create it as follow shows to avoid the instruction store
depend on scheduled in-between SUb and SUa.
+-------+
+----> reg |
| +---+---+
| ^
| | Missing +-------+
| | +-------------------->+ y |
| | | +---+---+
| +---+-+-+ ^
| | SUa | Store x 0(reg) |
| +---+---+ |
| ^ |
| | +------------------------+
| | |
| +---+--++
+----+ SUb | Store y 4(reg)
+-------+
Reviewed By: evandro, arsenm, rampitec, foad, fhahn
Differential Revision: https://reviews.llvm.org/D72031
This patch is a follow up of D84733.
If a function has noundef attribute in returned position, instructions that return undef or poison value cause UB.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85178
If we can't identify alloca used in lifetime marker we
need to assume to worst case scenario.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D84630
addGlobalValueSummary can check newly added FunctionSummary
and set HasParamAccess to mark that generateParamAccessSummary
is needed.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D85182
Change to not generate truncate instructions if all use of a truncate
operation don't care about higher bits. For example, an i32 add
instruction doesn't care about higher 32 bits in 64 bit registers.
Updates regression tests also.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D85418
In GlobalISel, if you have a load into a small type with a range, you'll hit
an assert if you try to compute known bits on it starting at a larger type.
e.g.
```
%x:_(s8) = G_LOAD %whatever(p0) :: (load 1 ... !range !n)
...
%y:_(s32) = G_SOMETHING %x
```
When we walk through G_SOMETHING and hit the load, the width of our known bits
is 32. However, the width of the range is going to be 8. This will cause us
to hit an assert.
To fix this, make computeKnownBitsFromRangeMetadata zero extend or truncate
the range type to match the bitwidth of the known bits we're calculating.
Add a testcase in CodeGen/GlobalISel/KnownBitsTest.cpp to reflect that this
works now.
https://reviews.llvm.org/D85375
Buildbot reported a build failure when building shared
library libLLVMBPFCodeGen.so with unknown reference to
"createCFGSimplificationPass".
Commit 87cba43402 ("BPF: add a SimplifyCFG IR pass during
generic Scalar/IPO optimization") added an IR pass SimplifyCFG
by BPF target. The commit called function
createCFGSimplificationPass() defined in "Scalar" library.
Add this library in Target/BPF/LLVMBuild.txt so
shared library build can succeed.
Negator knows how to do this, but the one-use reasoning is getting
a bit muddy here, we don't really want to increase instruction count,
so we need to both lie that "IsNegation" and have an one-use check
on the outermost LHS value.
Multiplication is commutative, and either of operands can be negative,
so if the RHS is a negated power-of-two, we should try to make it
true power-of-two (which will allow us to turn it into a left-shift),
by trying to sink the negation down into LHS op.
But, we shouldn't re-invent the logic for sinking negation,
let's just use Negator for that.
Tests and original patch by: Simon Pilgrim @RKSimon!
Differential Revision: https://reviews.llvm.org/D85446
One of the callers only wants the condition, but the vselect can
be simplified by getNode making it hard or impossible to retrieve
the condition.
Instead, return the condition and make the other 2 callers
responsible for creating the vselect node using the condition.
Rename the function to WidenVSELECTMask accordingly.
Differential Revision: https://reviews.llvm.org/D85468
The following bpf linux kernel selftest failed with latest
llvm:
$ ./test_progs -n 7/10
...
The sequence of 8193 jumps is too complex.
verification time 126272 usec
stack depth 320
processed 114799 insns (limit 1000000)
...
libbpf: failed to load object 'pyperf600_nounroll.o'
test_bpf_verif_scale:FAIL:110
#7/10 pyperf600_nounroll.o:FAIL
#7 bpf_verif_scale:FAIL
After some investigation, I found the following llvm patch
https://reviews.llvm.org/D84108
is responsible. The patch disabled hoisting common instructions
in SimplifyCFG by default. Later on, the code changes and a
SimplifyCFG phase with hoisting on cannot do the work any more.
A test is provided to demonstrate the problem.
The IR before simplifyCFG looks like:
for.cond:
%i.0 = phi i32 [ 0, %entry ], [ %inc, %for.inc ]
%cmp = icmp ult i32 %i.0, 6
br i1 %cmp, label %for.body, label %for.cond.cleanup
for.cond.cleanup:
%2 = load i8*, i8** %frame_ptr, align 8, !tbaa !2
%cmp2 = icmp eq i8* %2, null
%conv = zext i1 %cmp2 to i32
call void @llvm.lifetime.end.p0i8(i64 8, i8* nonnull %1) #3
call void @llvm.lifetime.end.p0i8(i64 8, i8* nonnull %0) #3
ret i32 %conv
for.body:
%3 = load i8*, i8** %frame_ptr, align 8, !tbaa !2
%tobool.not = icmp eq i8* %3, null
br i1 %tobool.not, label %for.inc, label %land.lhs.true
The first two insns of `for.cond.cleanup` and `for.body`, load and
icmp, can be hoisted to `for.cond` block. With Patch D84108, the
optimization is delayed. But unfortunately, later on loop rotation
added addition phi nodes to `for.body` and hoisting cannot
be done any more.
Note such a hoisting is beneficial to bpf programs as
bpf verifier does path sensitive analysis and verification.
The hoisting preverts reloading from stack which will assume
conservative value and increase exploited insns. In this case,
it caused verifier failure.
To fix this problem, I added an IR pass from bpf target
to performance additional simplifycfg with hoisting common inst
enabled.
Differential Revision: https://reviews.llvm.org/D85434
Summary:
This patch takes the indices operands of `insertelement`/`insertvalue`
into account while generation of seed elements for `findBuildAggregate()`.
This function has kept the original order of `insert`s before.
Also this patch optimizes `findBuildAggregate()` preventing it from
redundant temporary vector allocations and its multiple reversing.
Fixes llvm.org/pr44067
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83779
Add cases of fused fmul+fadd/fsub with f16 and f64 operands to cost model.
Also added operations with contract attribute.
Fixed line endings in test.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D84995
Use the same basic strategy as LegalizeVectorTypes. Try to index into
smaller pieces if there's a constant index, and otherwise fall back to
a stack temporary.
We don't want mandatory events in the training log. We do want to handle
them, to keep the native size accounting accurate, but that's all.
Fixed the code, also expanded the test to capture this.
Differential Revision: https://reviews.llvm.org/D85373
If a function is in a unique section, putting all jump tables in
.rodata will prevent functions that have a jump table to get
garbage collect by the linker.
Therefore, we need to put jump table into a unique section as well.
Reviewed By: Xiangling_L
Differential Revision: https://reviews.llvm.org/D84761
If we were to have an operation with an s16 def that needs to be
executed in a waterfall loop, not having s16 legal would place an
avoidable burden on RegBankSelect to widen it.
This was trying to constrain a physical register. By the verifier's
understanding, it's impossible to have a 1-bit copy to vcc/vcc_lo so
don't try to handle physregs.
This patch makes the 'Values' field optional. This is useful when we
handcraft the terminating entry of DIEs.
```
debug_info:
- Version: 4
...
Entries:
- AbbrCode: 1
Values:
- Value: 0x1234
- AbbrCode: 0 ## Termination
```
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D85397
Add given input and mark it as tied.
Doesn't create additional copy compared to
matching input constraint to virtual register.
Differential Revision: https://reviews.llvm.org/D85122
As noted on PR46885, the number of mask elements should always be a power of 2, so to fix the static analyzer warning we are better off replacing the condition to <= 4, and I've added a pow2 assertion as well.
We already need to include raw_ostream.h, also add missing StringRef.h and cstdint implicit dependencies.
Remove unnecessary includes from PDBExtras.cpp
This allows us to remove extra patterns from AArch64SVEInstrInfo.td
because we can reuse those required for fixed length vectors.
Differential Revision: https://reviews.llvm.org/D85328
NOTE: Also uses SVE code generation for NEON size vectors, instead
of expanding i64 based vector multiplications.
Differential Revision: https://reviews.llvm.org/D85327
This is a simple patch that folds freeze(undef) into a proper constant after inspecting its uses.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D84948
Arm MVE has multiple instructions such as VMLAVA.s8, which (in this
case) can take two 128bit vectors, sign extend the inputs to i32,
multiplying them together and sum the result into a 32bit general
purpose register. So taking 16 i8's as inputs, they can multiply and
accumulate the result into a single i32 without any rounding/truncating
along the way. There are also reduction instructions for plain integer
add and min/max, and operations that sum into a pair of 32bit registers
together treated as a 64bit integer (even though MVE does not have a
plain 64bit addition instruction). So giving the vectorizer the ability
to use these instructions both enables us to vectorize at higher
bitwidths, and to vectorize things we previously could not.
In order to do that we need a way to represent that the reduction
operation, specified with a llvm.experimental.vector.reduce when
vectorizing for Arm, occurs inside the loop not after it like most
reductions. This patch attempts to do that, teaching the vectorizer
about in-loop reductions. It does this through a vplan recipe
representing the reductions that the original chain of reduction
operations is replaced by. Cost modelling is currently just done through
a prefersInloopReduction TTI hook (which follows in a later patch).
Differential Revision: https://reviews.llvm.org/D75069
Unit.Format, Unit.Version and Unit.AddrSize are replaced with
dwarf::FormParams in D84496 to get rid of unnecessary functions
getOffsetSize() and getRefSize(). However, that change makes it
difficult to make AddrSize optional (Optional<uint8_t>). This change
pulls out dwarf::FormParams from DWARFYAML::Unit and use it as a helper
struct in DWARFYAML::emitDebugInfo().
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D85296
These might occur in seemingly generic assembly. Previously when
targeting COFF, they were silently ignored, which certainly won't
give the right result. Instead clearly error out, to make it clear
that the assembly needs to be adjusted for this target.
Also change a preexisting report_fatal_error into a proper error
message, pointing out the offending source instruction. This isn't
strictly an internal error, as it can be triggered by user input.
Differential Revision: https://reviews.llvm.org/D85242
We need to have special handling of i128 div/rem on Windows due
to a weird calling convention needed for the libcall. There was
also some code that made it look like we do the same for sdivrem/udiv,
but the code didn't account for multiple return values of those
functions so couldn't possibly work. I think this code never
triggers because we don't have libcall names defined for those
functions by default so DAGCombine never creates DIVREM nodes.
Correctly sign extend the addend, and fix implicit shift operand decoding
(it incorrectly returned 0 for some cases), and check that the initial
encoded immediate is 0.
The functionality is used when calling imageAtomicExhange() on float
type imageBuffer in Graphics shaders.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D85187
This is the last JumpThreading patch for getting the performance numbers shown at
https://reviews.llvm.org/D84940#2184653 .
This patch makes ProcessBlock call ProcessBranchOnPHI when the branch condition
is freeze(phi) as well (originally it calls the function when the condition is
phi only).
Since what ProcessBranchOnPHI does is to duplicate the basic block into
predecessors if profitable, it is still valid when the condition is freeze(phi)
too.
```
p = phi [a, pred1] [b, pred2]
p.fr = freeze p
br p.fr, ...
=>
pred1:
p.fr = freeze a
br p.fr, ...
pred2:
p.fr2 = freeze b
br p.fr2, ...
```
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85029
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
For example a v4f16 argument is scalarized to 4 i32 values. So
the values are spread out instead of being packed tightly like
in the original vector.
Fixes PR47000.
LTO builds have been creating invalid DWARF and one of the errors was a file index that was out of bounds. "llvm-dwarfdump --verify" will check all file indexes for line tables already, but there are no checks for the validity of file indexes in attributes.
The verification will verify if there is a DW_AT_decl_file/DW_AT_call_file that:
- there is a line table for the compile unit
- the file index is valid
- the encoding is appropriate
Tests are added that test all of the above conditions.
Differential Revision: https://reviews.llvm.org/D84817
This patch changes the functionality of AsmPrinter to name the basic block end labels as LBB_END${i}_${j}, with ${i} being the identifier for the function and ${j} being the identifier for the basic block. The new naming scheme is consistent with how basic block labels are named (.LBB${i}_{j}), and how function end symbol are named (.Lfunc_end${i}) and helps to write stronger tests for the upcoming patch for BB-Info section (as proposed in https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html). The end label is used with basicblock-labels (BB-Info section in future) and basicblock-sections to compute the size of basic blocks and basic block sections, respectively. For BB sections, the section containing the entry basic block will not have a BB end label since it already gets the function end-label.
This label is cached for every basic block (CachedEndMCSymbol) like the label for the basic block (CachedMCSymbol).
Differential Revision: https://reviews.llvm.org/D83885
We were errneously only doing that for old-style abs/nabs,
but we have no such legality check on the condition of the select.
https://rise4fun.com/Alive/xBHS
https://rise4fun.com/Alive/pZEr
Name: mul nuw with icmp eq
Pre: (C2 %u C1) != 0
%a = mul nuw i8 %x, C1
%r = icmp eq i8 %a, C2
=>
%r = false
Name: mul nuw with icmp ne
Pre: (C2 %u C1) != 0
%a = mul nuw i8 %x, C1
%r = icmp ne i8 %a, C2
=>
%r = true
There are potentially several other transforms we need to add based on:
D51625
...but it doesn't look like there was follow-up to that patch.
MSan removes readnone/readonly and similar attributes from callees,
because after MSan instrumentation those attributes no longer apply.
This change removes the attributes from call sites, as well.
Failing to do this may cause DSE of paramTLS stores before calls to
readonly/readnone functions.
Differential Revision: https://reviews.llvm.org/D85259
This reverts commit e9761688e4. It breaks the build:
```
~/src/llvm-project/llvm/lib/Analysis/IVDescriptors.cpp:868:10: error: no viable conversion from returned value of type 'SmallVector<[...], 8>' to function return type 'SmallVector<[...], 4>'
return ReductionOperations;
```
These were implementation detail, but become necessary for generic data
copying.
Also added const variations to them, and move assignment, since we had a
move ctor (and the move assignment helps in a subsequent patch).
Differential Revision: https://reviews.llvm.org/D85262
Arm MVE has multiple instructions such as VMLAVA.s8, which (in this
case) can take two 128bit vectors, sign extend the inputs to i32,
multiplying them together and sum the result into a 32bit general
purpose register. So taking 16 i8's as inputs, they can multiply and
accumulate the result into a single i32 without any rounding/truncating
along the way. There are also reduction instructions for plain integer
add and min/max, and operations that sum into a pair of 32bit registers
together treated as a 64bit integer (even though MVE does not have a
plain 64bit addition instruction). So giving the vectorizer the ability
to use these instructions both enables us to vectorize at higher
bitwidths, and to vectorize things we previously could not.
In order to do that we need a way to represent that the reduction
operation, specified with a llvm.experimental.vector.reduce when
vectorizing for Arm, occurs inside the loop not after it like most
reductions. This patch attempts to do that, teaching the vectorizer
about in-loop reductions. It does this through a vplan recipe
representing the reductions that the original chain of reduction
operations is replaced by. Cost modelling is currently just done through
a prefersInloopReduction TTI hook (which follows in a later patch).
Differential Revision: https://reviews.llvm.org/D75069
This was the most obvious regression in
f5df5cd5586ae9cfb2d9e53704dfc76f47aff149.f5df5cd5586ae9cfb2d9e53704dfc76f47aff149
We really don't want to do this if the original/outermost subtraction
isn't a negation, and therefore doesn't go away - just sinking negation
isn't a win. We are actually appear to be missing folds so hoist it.
https://rise4fun.com/Alive/tiVe
We've had issues in the past where isHorizontalBinOp calls would affect later combines as the LHS/RHS references had been commuted but still failed to match.
The `decode_relrs` helper is declared as:
`Expected<std::vector<Elf_Rel>> decode_relrs(Elf_Relr_Range relrs) const;`
it never returns an error though and hence can be simplified to return
a vector.
Differential revision: https://reviews.llvm.org/D85302
Implement proper folding of statepoint meta operands (deopt and GC)
when statepoint uses tied registers.
For deopt operands it is just about properly preserving tiedness
in new instruction.
For tied GC operands folding is a little bit more tricky.
We can fold tied GC operands only from InlineSpiller, because it knows
how to properly reload tied def after it was turned into memory operand.
Other users (e.g. peephole) cannot properly fold such operands as they
do not know how (or when) to reload them from memory.
We do this by un-tieing operand we want to fold in InlineSpiller
and allowing to fold only untied operands in foldPatchpoint.
This reverts commit ac70b37a00
which reverted commit 8aeb2fe13a
because codegen tests got broken and i needed time to investigate.
This shows some regressions in tests, but they are all around GEP's,
so i'm not really sure how important those are.
https://rise4fun.com/Alive/1Gn
As with other targets, set the throughput cost of control-flow
instructions to free so that we don't miss out of vectorization
opportunities.
Differential Revision: https://reviews.llvm.org/D85283
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
Since there are no ill effects when performing these operations
with undefined elements, they are lowered to the already supported
unpredicated scalable vector equivalents.
Differential Revision: https://reviews.llvm.org/D85117
We currently don't do anything to fold any_extend vector loads as no target has such an instruction.
Instead I've added support for folding to a zextload, SimplifyDemandedBits does a good job of adjusting the zext(truncate(()) stages as required later on.
We still need the custom scalar extload handling instead of using the tryToFoldExtOfLoad helper as it has different legality tests - we can probably tweak that to reduce most of the code duplication.
Fixes the regression I mentioned in rG99a971cadff7
Differential Revision: https://reviews.llvm.org/D85129
Currently, we only test the `--stackmap` option here:
https://github.com/llvm/llvm-project/blob/master/llvm/test/Object/stackmap-dump.test
it uses a precompiled MachO binary currently and I've found no tests for this option for ELF.
The implementation also has issues. For example, it might assert on a wrong version
of the .llvm-stackmaps section. Or it might crash on an empty or truncated section.
This patch introduces a new tools/llvm-readobj/ELF test file as well as implements a few
basic checks to catch simple crashes/issues
It also eliminates `unwrapOrError` calls in `printStackMap()`.
Differential revision: https://reviews.llvm.org/D85208
The code in SectionMemoryManager.cpp unnecessarily maps
read-only data sections with the READ+EXECUTE flags. This is
undesirable from a security stand-point.
Moreover, on the Fuchsia platform, which is now very strict
about mapping pages with the EXECUTE permission, this simply
fails, because the section's pages were initially allocated
with only the READ+WRITE flags.
A more detailed description of the issue can be found in this
public SwiftShader bug:
https://issuetracker.google.com/issues/154586551
This patch just restrict the mapping to the READ flag for ROData
sections. Code sections are still mapped with READ+EXECUTE as
expected.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D78574
This fixes an issue triggered by the following code, where emitEpilogue
got confused when trying to restore the SVE registers after the call,
whereas the call to bar() is implemented as a TCReturn:
int non_sve();
int sve(svint32_t x) { return non_sve(); }
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84869
This is a simple patch that makes freeze as a zero-cost instruction, as bitcast already is.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85023
This is one more NFC part extracted from D79485. Normal and SCC based loops have very different representation and have to be handled separatly each time we deal with loops. D79485 is going to introduce much more extensive use of loops what will be problematic with out this change.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D84838
Previously the time complexity is O(|number of paths from the root to an
implied feature| * CPU_FWATURE_MAX) where CPU_FEATURE_MAX is 92.
The number of paths can be large (theoretically exponential).
For an inline asm statement, there is a code path
`clang::Parser::ParseAsmStatement -> clang::Sema::ActOnGCCAsmStmt -> ASTContext::getFunctionFeatureMap`
leading to potentially many calls of getImpliedEnabledFeatures (41 for my -march=native case).
We should improve the performance a bit in case the number of inline asm
statements is large (Linux kernel builds).
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D85257
Added a mechanism to check the element type, get the total element
count, and the size of an element.
Differential Revision: https://reviews.llvm.org/D85250
This patch simplified IR generation for __builtin_btf_type_id().
For __builtin_btf_type_id(obj, flag), previously IR builtin
looks like
if (obj is a lvalue)
llvm.bpf.btf.type.id(obj.ptr, 1, flag) !type
else
llvm.bpf.btf.type.id(obj, 0, flag) !type
The purpose of the 2nd argument is to differentiate
__builtin_btf_type_id(obj, flag) where obj is a lvalue
vs.
__builtin_btf_type_id(obj.ptr, flag)
Note that obj or obj.ptr is never used by the backend
and the `obj` argument is only used to derive the type.
This code sequence is subject to potential llvm CSE when
- obj is the same .e.g., nullptr
- flag is the same
- metadata type is different, e.g., typedef of struct "s"
and strust "s".
In the above, we don't want CSE since their metadata is different.
This patch change IR builtin to
llvm.bpf.btf.type.id(seq_num, flag) !type
and seq_num is always increasing. This will prevent potential
llvm CSE.
Also report an error if the type name is empty for
remote relocation since remote relocation needs non-empty
type name to do relocation against vmlinux.
Differential Revision: https://reviews.llvm.org/D85174
The sorting is needed, because reaching defs are (logically) ordered,
but are not collected in that order. This change will break up the
single call to std::sort into a series of smaller sorts, each of which
should use a cheaper comparison function than the original.
It is technically legal for optimizations to create an alloca that is
used by more than one dbg.declare, if one or both of them are inlined
instances of aliasing variables.
Differential Revision: https://reviews.llvm.org/D85172
This is the last remaining use of ConstantProp, migrate it to InstSimplify in the goal of removing ConstantProp.
Add -hexagon-instsimplify option to enable skipping of instsimplify in
tests that can't handle the extra optimization.
Differential Revision: https://reviews.llvm.org/D85047
Get the argument register and ensure there's a copy to the virtual
register. AMDGPU and AArch64 have similarish code to get the livein
value, and I also want to use this in multiple places.
This is a bit more aggressive about setting the register class than
the original function, but that's probably OK.
I think we're missing a few verifier checks for function live ins. I
noticed AArch64's calling convention code is not actually adding
liveins to functions, only the entry block (which apparently might not
matter that much?). There should probably be a verifier check that
entry block live ins are also live into the function. We also might
need a verifier check that the copy to the livein virtual register is
in the entry block.
The SVE instruction set only supports sdiv/udiv for 32-bit and 64-bit
integers. If we see an 8-bit or 16-bit divide, widen the operands to 32
bits, and narrow the result.
Differential Revision: https://reviews.llvm.org/D85170
If a section is supposed to hold elements of type T, then the
corresponding CreateSecStartEnd()'s Ty parameter represents T*.
Forwarding it to GlobalVariable constructor causes the resulting
GlobalVariable's type to be T*, and its SSA value type to be T**, which
is one indirection too many. This issue is mostly masked by pointer
casts, however, the global variable still gets an incorrect alignment,
which causes SystemZ to choose wrong instructions to access the
section.
This corresponds with the SelectionDAGISel change in D84056.
Also, rename some poorly named tests in CodeGen/X86/fast-isel-fneg.ll with NFC.
Differential Revision: https://reviews.llvm.org/D85149
Four new CO-RE relocations are introduced:
- TYPE_EXISTENCE: whether a typedef/record/enum type exists
- TYPE_SIZE: the size of a typedef/record/enum type
- ENUM_VALUE_EXISTENCE: whether an enum value of an enum type exists
- ENUM_VALUE: the enum value of an enum type
These additional relocations will make CO-RE bpf programs
more adaptive for potential kernel internal data structure
changes.
Differential Revision: https://reviews.llvm.org/D83878
This one is pretty easy and shrinks the list of unhandled
intrinsics. I'm not sure how relevant the insert point is. Using the
insert position of EntryBuilder will place this after
constants. SelectionDAG seems to end up emitting these after argument
copies and before anything else, but I don't think it really
matters. This also ends up emitting these in the opposite order from
SelectionDAG, but I don't think that matters either.
This also needs a fix to stop the later passes dropping this as a dead
instruction. DeadMachineInstructionElim's version of isDead special
cases LOCAL_ESCAPE for some reason, and I'm not sure why it's excluded
from MachineInstr::isLabel (or why isDead doesn't check it).
I also noticed DeadMachineInstructionElim never considers inline asm
as dead, but GlobalISel will drop asm with no constraints.
This patch tries to improve readability and maintenance
of createVectorizedLoopSkeleton by reorganizing some lines,
updating some of the comments and breaking it up into
smaller logical units.
Reviewed By: pjeeva01
Differential Revision: https://reviews.llvm.org/D83824
This revision adds the following peephole optimization
and it's negation:
%a = urem i64 %x, %y
%b = icmp ule i64 %a, %x
====>
%b = true
With John Regehr's help this optimization was checked with Alive2
which suggests it should be valid.
This pattern occurs in the bound checks of Rust code, the program
const N: usize = 3;
const T = u8;
pub fn split_mutiple(slice: &[T]) -> (&[T], &[T]) {
let len = slice.len() / N;
slice.split_at(len * N)
}
the method call slice.split_at will check that len * N is within
the bounds of slice, this bounds check is after some transformations
turned into the urem seen above and then LLVM fails to optimize it
any further. Adding this optimization would cause this bounds check
to be fully optimized away.
ref: https://github.com/rust-lang/rust/issues/74938
Differential Revision: https://reviews.llvm.org/D85092
Teach SCCP to create notconstant lattice values from inequality
assumes and nonnull metadata, and update getConstant() to make
use of them. Additionally isOverdefined() needs to be changed to
consider notconstant an overdefined value.
Handling inequality branches is delayed until our branch on undef
story in other passes has been improved.
Differential Revision: https://reviews.llvm.org/D83643
Introduced by fd6584a220
Following similar use of casts in AsmParser.cpp, for instance - ideally
this type would use unsigned chars as they're more representative of raw
data and don't get confused around implementation defined choices of
char's signedness, but this is what it is & the signed/unsigned
conversions are (so far as I understand) safe/bit preserving in this
usage and what's intended, given the API design here.
This patch stops unconditionally transforming FSUB(-0, X) into an FNEG(X) while building the MIR.
This corresponds with the SelectionDAGISel change in D84056.
Differential Revision: https://reviews.llvm.org/D85139
for the advantage outlined by D83639 ([OptTable] Support grouped short options)
Some behavior changes:
* -i={0,false} is removed. Use --no-inlines instead.
* --demangle={0,false} is removed. Use --no-demangle instead
* -untag-addresses={0,false} is removed. Use --no-untag-addresses instead
Added a higher level API OptTable::parseArgs which handles optional
initial options populated from an environment variable, expands response
files recursively, and parses options.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83530
The swap removal pass looks to remove swaps when a loaded value is swapped, some
number of lane-insensitive operations are performed and then the value is
swapped again and stored.
However, in a situation where we load the value, swap it and then store it
without swapping again, the pass erroneously removes the single swap. The
reason is that both checks in the same equivalence class:
- load feeds a swap
- swap feeds a store
pass. However, there is no check that the two swaps are actually a single swap.
This patch just fixes that.
Differential revision: https://reviews.llvm.org/D84785
The custom lowering saves an instruction over the generic expansion, by
taking advantage of the fact that PowerPC shift instructions are well
defined in the shift-by-bitwidth case.
Differential Revision: https://reviews.llvm.org/D83948
Now that rG47cea9e82dda941e lets us aggressively decode multi-use shuffles for the OR(SHUFFLE(),SHUFFLE()) case we don't need the computeKnownBits variant any more.
Commit https://reviews.llvm.org/rGcd53ded557c3 attempts to fix the
computation in computeHostNumPhysicalCores() to respect Affinity.
However, the GLIBC wrapper of the affinity system call fails with
a default size of cpu_set_t on systems that have more than 1024 CPUs.
This just fixes the computation on such large machines.
Permit lane-crossing post shuffles on AVX1 targets as long as every element comes from the same source lane, which for v8f32/v4f64 cases can be efficiently lowered with the LowerShuffleAsLanePermuteAnd* style methods.
This is based on the existing code for the non-intrinsic idioms
in InstCombine.
The vector constant constraint is non-obvious: undefs should be
ok in the outer call, but they can't propagate safely from the
inner call in all cases. Example:
https://alive2.llvm.org/ce/z/-2bVbM
define <2 x i8> @src(<2 x i8> %x) {
%0:
%m = umin <2 x i8> %x, { 7, undef }
%m2 = umin <2 x i8> { 9, 9 }, %m
ret <2 x i8> %m2
}
=>
define <2 x i8> @tgt(<2 x i8> %x) {
%0:
%m = umin <2 x i8> %x, { 7, undef }
ret <2 x i8> %m
}
Transformation doesn't verify!
ERROR: Value mismatch
Example:
<2 x i8> %x = < undef, undef >
Source:
<2 x i8> %m = < #x00 (0) [based on undef value], #x00 (0) >
<2 x i8> %m2 = < #x00 (0), #x00 (0) >
Target:
<2 x i8> %m = < #x07 (7), #x10 (16) >
Source value: < #x00 (0), #x00 (0) >
Target value: < #x07 (7), #x10 (16) >
This patch adds a CFI entry for each SVE callee saved register
that needs unwind info at an offset from the CFA. The offset is
a DWARF expression because the offset is partly scalable.
The CFI entries only cover a subset of the SVE callee-saves and
only encodes the lower 64-bits, thus implementing the lowest
common denominator ABI. Existing unwinders may support VG but
only restore the lower 64-bits.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84044
The CFA is calculated as (SP/FP + offset), but when there are
SVE objects on the stack the SP offset is partly scalable and
should instead be expressed as the DWARF expression:
SP + offset + scalable_offset * VG
where VG is the Vector Granule register, containing the
number of 64bits 'granules' in a scalable vector.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84043
This is the final bit of work to relax the register allocation
requirements when code generating normal LLVM IR, which rarely
care about the result of inactive lanes. By using _PRED nodes
we can make better use of SVE's reversed instructions.
Also removes a redundant parameter from the min/max tests.
Differential Revision: https://reviews.llvm.org/D85142
As discussed in D84949, this removes the constraint to cast since it does not
cause compile time degradation.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D85188
This option was added a while back, to help improve AA around pointer
phi loops. It looks for phi(gep(phi, const), x) loops, checking if x can
then prove more precise aliasing info.
Differential Revision: https://reviews.llvm.org/D82998
Added patterns so that both SSAT and USAT instructions are generated with shifts. Added corresponding regression tests.
Differential Review: https://reviews.llvm.org/D85120
[X86][SSE] Shuffle combine blends to OR(X,Y) if the relevant elements are known zero (REAPPLIED)
This allows us to remove the (depth violating) code in getFauxShuffleMask where we were combining the OR(SHUFFLE,SHUFFLE) shuffle inputs as well, and not just the OR().
This is a minor step toward being able to shuffle combine from/to SELECT/BLENDV as a faux shuffle.
Reapplied with fixed signed/unsigned comparisons.
Currently, instruction level fast math flags are not considered when
generating patterns for the machine combiner.
This currently leads to some missed opportunities to generate FMAs in
combination with `#pragma clang fp contract (fast)`.
For example, when building the example below with -O3 for AArch64, no
FMADD is generated. If built with -O2 and the DAGCombiner is used
instead of the MachineCombiner for FMAs, an FMADD is generated.
With this patch, the same code is generated in both cases.
float madd_contract(float a, float b, float c) {
#pragma clang fp contract (fast)
return (a * b) + c;
}
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84930
For FP_TO_INT and INT_TO_FP lowering, we have direct-move and
non-direct-move methods. But they share some conversion logic, so we can
reduce redundant code by introducing new methods.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D81818
Compared to the optimized code with branch conditions never frozen,
limiting the type of freeze's operand causes generation of suboptimal code in
some cases.
I would like to suggest removing the constraint, as this patch does.
If the number of freeze instructions becomes significant, this can be revisited.
Differential Revision: https://reviews.llvm.org/D84949
Test function mask_cmp_128 failed during ISEL
LLVM ERROR: Cannot select: t37: v8i1 = X86ISD::KSHIFTL t48, TargetConstant:i8<4>
due to v8i1 only available under AVX512DQ.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D84922
When scavenging consider the sub-register of the source operand
to determine the bank of a candidate register (not just sub0).
Without this it is possible to introduce an infinite loop,
e.g. $sgpr15_sgpr16_sgpr17 can be assigned for a conflict between
$sgpr0 and SGPR_96:sub1.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D84910
D68041 placed `__profc_`, `__profd_` and (if exists) `__profvp_` in different comdat groups.
There are some issues:
* Cost: one or two additional section headers (`.group` section(s)): 64 or 128 bytes on ELF64.
* `__profc_`, `__profd_` and (if exists) `__profvp_` should be retained or
discarded. Placing them into separate comdat groups is conceptually inferior.
* If the prevailing group does not include `__profvp_` (value profiling not
used) but a non-prevailing group from another translation unit has `__profvp_`
(the function is inlined into another and triggers value profiling), there
will be a stray `__profvp_` if --gc-sections is not enabled.
This has been fixed by 3d6f53018f.
Actually, we can reuse an existing symbol (we choose `__profd_`) as the group
signature to avoid a string in the string table (the sole reason that D68041
could improve code size is that `__profv_` was an otherwise unused symbol which
wasted string table space). This saves one or two section headers.
For a -DCMAKE_BUILD_TYPE=Release -DLLVM_BUILD_INSTRUMENTED=IR build, `ninja
clang lld`, the patch has saved 10.5MiB (2.2%) for the total .o size.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D84723
We might want this if we find out that using of MustExecute analysis is too expensive.
By default we do the analysis because its complexity does not exceed the complexity
of whole loop copying in unswitching. Follow-up for D84925.
Differential Revision: https://reviews.llvm.org/D85001
Reviewed By: asbirlea
Adds the function createMCInst() to MCContext that creates a MCInst using
a typed bump alloctor.
MCInst contains a SmallVector<MCOperand, 8>. The SmallVector is POD only
for <= 8 operands. The default untyped bump pointer allocator of MCContext
does not delete the MCInst, so if the SmallVector grows, it's a leak.
This fixes https://bugs.llvm.org/show_bug.cgi?id=46900.
Merging alias results from different paths, when a path did phi
translation is not necesarily correct. Conservatively terminate such paths.
Aimed to fix PR46156.
Differential Revision: https://reviews.llvm.org/D84905
GlobalISel is the default ISel for aarch64 at -O0. Prior to D78465, GlobalISel
didn't have support for dealing with address-of-global lowerings, so it fell
back to SelectionDAGISel.
HWASan Globals require special handling, as they contain the pointer tag in the
top 16-bits, and are thus outside the code model. We need to generate a `movk`
in the instruction sequence with a G3 relocation to ensure the bits are
relocated properly. This is implemented in SelectionDAGISel, this patch does
the same for GlobalISel.
GlobalISel and SelectionDAGISel differ in their lowering sequence, so there are
differences in the final instruction sequence, explained in
`tagged-globals.ll`. Both of these implementations are correct, but GlobalISel
is slightly larger code size / slightly slower (by a couple of arithmetic
instructions). I don't see this as a problem for now as GlobalISel is only on
by default at `-O0`.
Reviewed By: aemerson, arsenm
Differential Revision: https://reviews.llvm.org/D82615
VPSEL has slightly different semantics under tail predication (it can
end up selecting from Qn, Qm and Qd). We do not model that at the moment
so they block tail predicated loops from being formed.
This just converts them into a predicated VMOV instead (via a VORR),
allowing tail predication to happen whilst still modelling the original
behaviour of the input.
Differential Revision: https://reviews.llvm.org/D85110
Specified in https://github.com/WebAssembly/simd/pull/237, these
instructions load the first vector lane from memory and zero the other
lanes. Since these instructions are not officially part of the SIMD
proposal, they are only available on an opt-in basis via LLVM
intrinsics and clang builtin functions. If these instructions are
merged to the proposal, this implementation will change so that the
instructions will be generated from normal IR. At that point the
intrinsics and builtin functions would be removed.
This PR also changes the opcodes for the experimental f32x4.qfm{a,s}
instructions because their opcodes conflicted with those of the
v128.load{32,64}_zero instructions. The new opcodes were chosen to
match those used in V8.
Differential Revision: https://reviews.llvm.org/D84820
Part of https://bugs.llvm.org/show_bug.cgi?id=41734
LTO can drop externally available definitions. Such AssociatedSymbol is
not associated with a symbol. ELFWriter::writeSection() will assert.
Allow a SHF_LINK_ORDER section to have sh_link=0.
We need to give sh_link a syntax, a literal zero in the linked-to symbol
position, e.g. `.section name,"ao",@progbits,0`
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D72899
Fixes test-suite compile failure caused by 8dfb5d7.
While I'm in the area, add some more test coverage to related
operations, to make sure we aren't missing any other patterns.
Archives can now be specified as input files the same way that object
files are. Archives will always be linked after all objects (regardless
of the relative order of the inputs) but before any dynamic libraries or
process symbols.
This patch also relaxes matching for slice triples in
StaticLibraryDefinitionGenerator in order to support this feature:
Vendors need not match if the source vendor is unknown.
Currently, ArgPromotion may leave metadata uses of promoted values,
which will end up in the wrong function, creating invalid IR.
PR33641 fixed this for dead arguments, but it can be also be triggered
arguments with users that are promoted (see the updated test case).
We also have to drop uses to them after promoting them. We need to do
this after dealing with the non-metadata uses, so I also moved the empty
use case to the loop that deals with updating the arguments of the new
function.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D85127
Extend the memop value profile buckets to be more flexible (could accommodate a
mix of individual values and ranges) and to cover more value ranges (from 11 to
22 buckets).
Disabled behind a flag (to be enabled separately) and the existing code to be
removed later.
Differential Revision: https://reviews.llvm.org/D81682
Instructions should not be scheduled across ENDBR instructions, as this would result in the ENDBR being displaced, breaking the parity needed for the Indirect Branch Tracking feature of CET.
Currently, the X86IndirectBranchTracking pass is later than the instruction scheduling in the pipeline, what causes the bug to be unnoticeable and very hard (if not unfeasible) to be triggered while compiling C files with the standard LLVM setup. Yet, for correctness and to prevent issues in future changes, the compiler should prevent the such scheduling.
Differential Revision: https://reviews.llvm.org/D84862
This allows us to remove the (depth violating) code in getFauxShuffleMask where we were combining the OR(SHUFFLE,SHUFFLE) shuffle inputs as well, and not just the OR().
This is a minor step toward being able to shuffle combine from/to SELECT/BLENDV as a faux shuffle.
This adds an isel pattern and special XOR8rr_NOREX instruction
to enable the use of h-registers for __builtin_parity. This avoids
a copy and a shift instruction. The NOREX instruction is in case
register allocation doesn't use the matching l-register for some
reason. If a R8-R15 register gets picked instead, we won't be
able to encode the instruction since an h-register can't be used
with a REX prefix.
Fixes PR46954
A JSON->TensorSpec utility we will use subsequently to specify
additional outputs needed for certain training scenarios.
Differential Revision: https://reviews.llvm.org/D84976
Freeze always returns a defined value. This also prevents msan from
checking the input shadow, which happened because freeze wasn't
explicitly visited.
Differential Revision: https://reviews.llvm.org/D85040
In some cases, it seems like we can get rid of unnecessary s/umins by
using information from the loop guards (unless I am missing something).
One place where this seems to be helpful in practice is when computing
loop trip counts. This patch just changes howManyGreaterThans for now.
Note that this requires a loop for which we can check 'is guarded'.
On SPEC2000/SPEC2006/MultiSource, there are some notable changes for
some programs in the number of loops unrolled and trip counts computed.
```
Same hash: 179 (filtered out)
Remaining: 58
Metric: scalar-evolution.NumTripCountsComputed
Program base patch diff
test-suite...langs-C/compiler/compiler.test 25.00 31.00 24.0%
test-suite.../Applications/SPASS/SPASS.test 2020.00 2323.00 15.0%
test-suite...langs-C/allroots/allroots.test 29.00 32.00 10.3%
test-suite.../Prolangs-C/loader/loader.test 17.00 18.00 5.9%
test-suite...fice-ispell/office-ispell.test 253.00 265.00 4.7%
test-suite...006/450.soplex/450.soplex.test 3552.00 3692.00 3.9%
test-suite...chmarks/MallocBench/gs/gs.test 453.00 470.00 3.8%
test-suite...ngs-C/assembler/assembler.test 29.00 30.00 3.4%
test-suite.../Benchmarks/Ptrdist/bc/bc.test 263.00 270.00 2.7%
test-suite...rks/FreeBench/pifft/pifft.test 722.00 741.00 2.6%
test-suite...count/automotive-bitcount.test 41.00 42.00 2.4%
test-suite...0/253.perlbmk/253.perlbmk.test 1417.00 1451.00 2.4%
test-suite...000/197.parser/197.parser.test 387.00 396.00 2.3%
test-suite...lications/sqlite3/sqlite3.test 1168.00 1189.00 1.8%
test-suite...000/255.vortex/255.vortex.test 173.00 176.00 1.7%
Metric: loop-unroll.NumUnrolled
Program base patch diff
test-suite...langs-C/compiler/compiler.test 1.00 3.00 200.0%
test-suite.../Applications/SPASS/SPASS.test 134.00 234.00 74.6%
test-suite...count/automotive-bitcount.test 3.00 4.00 33.3%
test-suite.../Prolangs-C/loader/loader.test 3.00 4.00 33.3%
test-suite...langs-C/allroots/allroots.test 3.00 4.00 33.3%
test-suite...Source/Benchmarks/sim/sim.test 10.00 12.00 20.0%
test-suite...fice-ispell/office-ispell.test 21.00 25.00 19.0%
test-suite.../Benchmarks/Ptrdist/bc/bc.test 32.00 38.00 18.8%
test-suite...006/450.soplex/450.soplex.test 300.00 352.00 17.3%
test-suite...rks/FreeBench/pifft/pifft.test 60.00 69.00 15.0%
test-suite...chmarks/MallocBench/gs/gs.test 57.00 63.00 10.5%
test-suite...ngs-C/assembler/assembler.test 10.00 11.00 10.0%
test-suite...0/253.perlbmk/253.perlbmk.test 145.00 157.00 8.3%
test-suite...000/197.parser/197.parser.test 43.00 46.00 7.0%
test-suite...TimberWolfMC/timberwolfmc.test 205.00 214.00 4.4%
Geomean difference 7.6%
```
Fixes https://bugs.llvm.org/show_bug.cgi?id=46939
Fixes https://bugs.llvm.org/show_bug.cgi?id=46924 on X86.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D85046
This patch stops unconditionally transforming FSUB(-0,X) into an FNEG(X) while building the DAG. There is also one small change to handle the new FSUB(-0,X) similarly to FNEG(X) in the AMDGPU backend.
Differential Revision: https://reviews.llvm.org/D84056
`DenseMapAPIntKeyInfo` is now located in `lib/IR/LLVMContextImpl.h`.
Moved it into `include/ADT/DenseMapInfo.h` to use it.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85131
The 1st try at this (rG2265d01f2a5b) exposed what looks like
unspecified behavior in C/C++ resulting in test variations.
The arguments to BinaryOperator::CreateAnd() were both IRBuilder
function calls, and the order in which they execute determines
the order of the new instructions in the IR. But the order of
function arg evaluation is not fixed by the rules of C/C++, so
depending on compiler config, the test would fail because the
test expected a single fixed ordering of instructions.
Original commit message:
I tried to use m_Deferred() on this, but didn't find
a clean way to do that.
http://bugs.llvm.org/PR46955https://alive2.llvm.org/ce/z/2h6QTq
The offsets field should be omitted when the 'OffsetEntryCount' entry is
specified to be 0.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85006
There were various hacks used to try to avoid making s1 SGPR vs. s1
VCC ambiguous after constraining the register before we had a strategy
to deal with this. This also attempted to handle undef operands, which
are now illegal gMIR.
Use pad with undef and unmerge with unused results. This is annoyingly
similar to several other places in LegalizerHelper, but they're all
slightly different.
We already do this on AVX (+ for ZERO_EXTEND_VECTOR_INREG), but this enables it for all SSE targets - we attempted something similar back at rL357057 but hit issues with the ZERO_EXTEND_VECTOR_INREG handling (PR41249).
I'm still looking at the vector-mul.ll regression - which is due to 32-bit targets performing the load as a f64, resulting in the shuffle combiner thinking it has to create a shuffle in the float domain.
Fixes a regression caused by D82439, in which IT blocks were no longer being
generated when -Oz is present. This was due to the CPSR register being marked as
dead, while this case was not accounted for.
Differential Revision: https://reviews.llvm.org/D83667
No widening decisions will be computed for instructions outside the
loop. Do not try to get a widening decision. The load/store will be just
a scalar load, so treating at as normal should be fine I think.
Fixes PR46950.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D85087
This patch makes it possible to handle nonnull attribute violation at callsites in AAUndefinedBehavior.
If null pointer is passed to callee at a callsite and the corresponding argument of callee has nonnull attribute, the behavior of the callee is undefined.
In this patch, violations of argument nonnull attributes is only handled.
But violations of returned nonnull attributes can be handled and I will implement that in a follow-up patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84733
The patch restricts DIEDelta::SizeOf() to accept only DWARF forms that
are actually used in the LLVM codebase. This should make the use of the
class more explicit and help to avoid issues similar to fixed in D83958
and D84094.
Differential Revision: https://reviews.llvm.org/D84095
DIELabel can emit only 32- or 64-bit values, while it was created in
some places with DW_FORM_udata, which implies emitting uleb128.
Nevertheless, these places also expected to emit U32 or U64, but just
used a misleading DWARF form. The patch updates those places to use more
appropriate DWARF forms and restricts DIELabel::SizeOf() to accept only
forms that are actually used in the LLVM codebase.
Differential Revision: https://reviews.llvm.org/D84094
DIELocList is used with a limited number of DWARF forms, see the only
place where it is instantiated, DwarfCompileUnit::addLocationList().
The patch marks the unexpected execution path in DIELocList::SizeOf()
as unreachable, to reduce ambiguity.
Differential Revision: https://reviews.llvm.org/D84092
This is a refactor patch to prepare for adding the support for strict-fsetcc
in PowerPC backend. We want to move their definition into a uniform way so that,
we could add the strict node easier.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D81712
This drops a GNU gold workaround and reverts the revert commit rL366708.
Before binutils 2.34, gold -O2 and above did not correctly handle R_386_GOTOFF to
SHF_MERGE|SHF_STRINGS sections: https://sourceware.org/bugzilla/show_bug.cgi?id=16794
From the original review:
... it reduced the size of a big ARM-32 debug image by 33%. It contained ~68M
of relocations symbols out of total ~71M symbols (96% of symbols table was
generated for relocations with symbol).
-Wl,-O2 (and -Wl,-O3) is so rare that we should just lower the
optimization level for LLVM_LINKER_IS_GOLD rather than pessimizing all users.
If the upper bits of the __builtin_parity idiom are known to be
0 we were previously emitting an xor with 0 to get the parity flag.
But we can use cmp/test instead which may expose opportunities for
load folding or combining an AND.
As discussed on D81500, this adds a more general ElementCount variant of the build helper and converts the (non-scalable) unsigned NumElts variant to use it internally.
For AMDGPU, vectors with elements < 32 bits should be indexed in
32-bit elements and the desired bits extracted from there. For
elements > 64-bits, these should be reduce to 64/32 elements to enable
the normal dynamic indexing paths.
In the dynamic index cases, this produces shorter code most of the
time. This does immediately regress the constant index cases, but this
should be fixed once we have the most basic of shift combines.
The element size > 64 case is pretty much ported from the exisiting
DAG implementation for extract element promote. The increasing element
size case is new.
Try to be more consistent with the SDLoc param in the TargetLowering methods.
This also exposes an issue where we were passing a SDNode as a SDLoc, relying on the implicit SDLoc(SDNode) constructor.
This is a split patch of D80991.
This patch introduces AAPotentialValues and its interface only.
For more detail of AAPotentialValues abstract attribute, see the original patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D83283
The -phony-externals option adds a generator which explicitly defines any
otherwise unresolved externals as null. This transforms link-time
unresolved-symbol errors into potential runtime null pointer accesses
(if an unresolved external is actually accessed during execution).
This option can be useful in -harness mode to avoid having to mock a
large number of symbols that are not reachable at runtime (e.g. unused
methods referenced by a class vtable).
As mentioned on D70376, LVI can currently cause performance issues
when running under NewPM. The problem is that, unlike the legacy
pass manager, NewPM will not immediately discard the LVI analysis
if the following pass does not need it. This is a problem, because
LVI has a high memory requirement, and mass invalidation of LVI
values is very inefficient. LVI should only be alive during passes
that actively interact with it.
This patch addresses the issue by explicitly abandoning LVI after CVP,
which gets us back to the LegacyPM behavior.
Differential Revision: https://reviews.llvm.org/D84959
These prefixes should override the default behavior and force a larger immediate size. I don't believe gas issues any warning if you use {disp8} when a 32-bit displacement is already required. And this patch doesn't either.
This completes the {disp8} and {disp32} support from PR46650.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D84793
It's always safe to pick the earlier abs regardless of the nsw flag. We'll just lose it if it is on the outer abs but not the inner abs.
Differential Revision: https://reviews.llvm.org/D85053
Negating the input doesn't matter. I left a FIXME to copy the nsw flag if its present on the neg but not on the abs.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D85055
formLCSSAForInstructions is used by SCEVExpander, which tracks all
inserted instructions including LCSSA phis using asserting value
handles. This means cleanup needs to happen in the caller.
Extend formLCSSAForInstructions to take an optional pointer to a
vector. If this argument is non-nullptr, instead of directly deleting
the phis, add them to the vector, so the caller can process them.
This should address various PPC buildbot failures, including
http://lab.llvm.org:8011/builders/clang-ppc64be-linux-lnt/builds/40567
Noticed while investigating combining from concatenated shuffle vectors, we weren't checking that PSHUFLW/PSHUFHW was legal - we were depending on lowering splitting to subvectors.
Use IRBuilder instead PHINode::Create. This should not impact the
generated code, but IRBuilder provides a way to register callbacks for
inserted instructions, which is convenient for some users.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D85037
This adds sign/zero extending scalar loads/stores to the MVE
instructions added in D77813, allowing us to create up more post-inc
instructions. These are comparatively simple, compared to LDR/STR (which
may be better turned into an LDRD/LDM), but still require some additions
over MVE instructions. Because there are i12 and i8 variants of the
offset loads/stores dealing with different signs, we may need to convert
an i12 address to a i8 negative instruction. t2LDRBi12 can also be
shrunk to a tLDRi under the right conditions, so we need to be careful
with codesize too.
Differential Revision: https://reviews.llvm.org/D78625
abs() should be rare enough that using value tracking is not going
to be a compile-time cost burden, so use it to reduce a variety of
potential patterns. We do this in DAGCombiner too.
Differential Revision: https://reviews.llvm.org/D85043
Now we try to load and broadcast together for operand 1. Followed
by load and broadcast for operand 1. Previously we tried load
operand 1, load operand 1, broadcast operand 0, broadcast operand 1.
Now we have a single helper that tries load and broadcast for
one operand that we can just call twice.
querying getSCEV() for incomplete phis leads to wrong cache value in `ExprToIVMap`,
because incomplete phis may be simplified to same value before get SCEV expression.
Reviewed By: lebedev.ri, mkazantsev
Differential Revision: https://reviews.llvm.org/D77560
SPE doesn't have a fsel instruction, so don't try to lower to it.
This fixes a "Cannot select: tN: f64 = PPCISD::FSEL tX, tY, tZ" error.
Reviewed By: #powerpc, lkail
Differential Revision: https://reviews.llvm.org/D77773
The patterns were incorrect copies from the FPU code, and are
unnecessary, since there's no extended load for SPE. Just let LLVM
itself do the work by marking it expand.
Reviewed By: #powerpc, lkail
Differential Revision: https://reviews.llvm.org/D78670
Change to expand all arguments and return values to i64 to follow ABI.
Update regression tests also.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D84581
Refer to LangRef http://llvm.org/docs/LangRef.html#llvm-masked-load-intrinsics
'llvm.masked.load/store.*’ intrinsics are overloaded intrinsic, which allow the
load/store data to be a vector of any integer, floating-point or pointer data type.
Therefore, allow pointer data type when checking 'isLegalMaskedLoadStore()'.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D85045
Rather than hardcoding immediate values for 12 different combinations
in a nested pair of switches, we can perform the matched logic
operation on 3 magic constants to calculate the immediate.
Special thanks to this tweet https://twitter.com/rygorous/status/1187034321992871936
for making me realize I could do this.
Add the optimizations we have in the SelectionDAG version.
Known non-negative copies all known bits. Any known one other than
the sign bit makes result non-negative.
Differential Revision: https://reviews.llvm.org/D85000
D68049 created options for basic block sections: -fbasic-block-sections=,
-funique-basic-block-section-names. Rename options in llc and lld (--lto-)
to be consistent. Specifically,
+ Rename basicblock-sections to basic-block-sections
+ Rename unique-bb-section-names to unique-basic-block-section-names
Differential Revision: https://reviews.llvm.org/D84462
Summary: This patch separates the Loop Peeling Utilities from Loop Unrolling.
The reason for this change is that Loop Peeling is no longer only being used by
loop unrolling; Patch D82927 introduces loop peeling with fusion, such that
loops can be modified to have to same trip count, making them legal to be
peeled.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D83056
computeHostNumPhysicalCores() is designed to respect CPU affinity.
D84764 used sysconf(_SC_NPROCESSORS_ONLN) which does not respect
affinity.
SupportTests Threading.PhysicalConcurrency may fail if taskset -c is specified.
This fixes the ExecutionEngine/MCJIT/stubs-sm-pic.ll test in no-asserts
builds which is set to XFAIL on some platforms like 32-bit x86. More
importantly, we probably don't want to silently error in these cases.
Differential revision: https://reviews.llvm.org/D84390
If absolute value needs turn a negative number into a positive number it reduces the number of sign bits by at most 1.
Differential Revision: https://reviews.llvm.org/D84971
I found that propagateAttributes was ~23% of a thin link's run time
(almost 4x higher than the second hottest function). The main reason is
that it re-examines a global var each time it is referenced. This
becomes unnecessary once it is marked both non read only and non write
only. I added a set to avoid doing redundant work, which dropped the
runtime of that thin link by almost 15%.
I made a smaller efficiency improvement (no measurable impact) to skip
all summaries for a VI if the first copy is dead. I added an assert to
ensure that all copies are dead if any is. The code in
computeDeadSymbols marks all summaries for a VI as live. There is one
corner case where it was skipping marking an alias as live, that I
fixed. However, since the code earlier marked all copies of a preserved
GUID's VI as live, and each 'visit' marks all copies live, the only case
where this could make a difference is summaries that were marked live
when they were built initially, and that is only a few special compiler
generated symbols and inline assembly symbols, so it likely is never
provoked in practice.
Differential Revision: https://reviews.llvm.org/D84985
This patch implements the instruction definition and MC tests for the vector
string isolate instructions.
Differential Revision: https://reviews.llvm.org/D84197
https://reviews.llvm.org/D84909
Patch adds two new GICombinerRules, one for G_INTTOPTR and one for
G_PTRTOINT. The G_INTTOPTR elides ptr2int(int2ptr(x)) to a copy of x, if
the cast is within the same address space. The G_PTRTOINT elides
int2ptr(ptr2int(x)) to a copy of x. Patch additionally adds new combiner
tests for the AArch64 target to test these new combiner rules.
Patch by mkitzan
A function call can be replicated by optimizations like loop unroll and jump threading and the replicates end up sharing the sample nested callee profile. Therefore when it comes to merging samples for uninlined callees in the sample profile inliner, a callee profile can be merged multiple times which will cause an assert to fire.
This change avoids merging same callee profile for duplicate callsites by filtering out callee profiles with a non-zero head sample count.
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D84997
Refactoring `Slice` class and function `createUniversalBinary` from
`llvm-lipo` into MachOUniversalWriter. This refactoring is necessary so
as to use the refactored code for creating universal binaries under
llvm-libtool-darwin.
Reviewed by alexshap, smeenai
Differential Revision: https://reviews.llvm.org/D84662
This patch makes the 'debug_aranges' entry optional. If the entry is
empty, yaml2obj will only emit the header for it.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84921
In this patch, we add a helper function getDWARFEmitterByName(). This
function returns the proper DWARF section emitting method by the name.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84952
In this patch, emitDebugPubnames(), emitDebugPubtypes(),
emitDebugGNUPubnames(), emitDebugGNUPubtypes() are added.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85003
Scheduler will try to retrieve the offset and base addr to determine if two
loads/stores are disjoint memory access. PowerPC failed to handle this for
frame index which will bring extra memory dependency for loads/stores.
Reviewed By: jji
Differential Revision: https://reviews.llvm.org/D84308
This patch allows SimplifyPartiallyRedundantLoad work when
the branch condition was frozen.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84944
We can preserve make.implicit metadata in the split block if it is
guaranteed that after following the branch we always reach the block
where processing of null case happens, which is equivalent to
"initial condition must execute if the loop is entered".
Differential Revision: https://reviews.llvm.org/D84925
Reviewed By: asbirlea
Non-trivial unswitching simply moves terminator being unswitch from the loop
up to the switch block. It also preserves all metadata that was there. It might not
be a correct thing to do for `make.implicit` metadata. Consider case:
```
for (...) {
cond = // computed in loop
if (cond) return X;
if (p == null) throw_npe(); !make implicit
}
```
Before the unswitching, if `p` is null and we reach this check, we are guaranteed
to go to `throw_npe()` block. Now we unswitch on `p == null` condition:
```
if (p == null) !make implicit {
for (...) {
if (cond) return X;
throw_npe()
}
} else {
for (...) {
if (cond) return X;
}
}
```
Now, following `true` branch of `p == null` does not always lead us to
`throw_npe()` because the loop has side exit. Now, if we run ImplicitNullCheck
pass on this code, it may end up making the unswitch condition implicit. This may
lead us to turning normal path to `return X` into signal-throwing path, which is
not efficient.
Note that this does not happen during trivial unswitch: it guarantees that we do not
have side exits before condition being unswitched.
This patch fixes this situation by unconditional dropping of `make.implicit` metadata
when we perform non-trivial unswitch. We could preserve it if we could prove that the
condition always executes. This can be done as a follow-up.
Differential Revision: https://reviews.llvm.org/D84916
Reviewed By: asbirlea
is enabled.
When -sample-profile-merge-inlinee is enabled, new FunctionSamples may be
created during profile merge without GUIDToFuncNameMap being initialized.
That will occasionally cause compiler crash. The patch fixes it.
Differential Revision: https://reviews.llvm.org/D84994
Similar to what was recently done to ParseATTOperand. Make
ParseIntelOperand directly responsible for adding to the operand
vector instead of returning the operand. Return a bool for error.
Remove ErrorOperand since it is no longer used.
For consistency with legacy pass name.
Helps with 37 instances of "unknown pass name 'tbaa'" in check-llvm under NPM.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D84967
findAllocaForValue uses AllocaForValue to cache resolved values.
The function is used only to resolve arguments of lifetime
intrinsic which usually are not fare for allocas. So result reuse
is likely unnoticeable.
In followup patches I'd like to replace the function with
GetUnderlyingObjects.
Depends on D84616.
Differential Revision: https://reviews.llvm.org/D84617
Fix for the issue raised in https://github.com/rust-lang/rust/issues/74632.
The current heuristic for inserting LFENCEs uses a quadratic-time algorithm. This can apparently cause substantial compilation slowdowns for building Rust projects, where functions > 5000 LoC are apparently common.
The updated heuristic in this patch implements a linear-time algorithm. On a set of benchmarks, the slowdown factor for the generated code was comparable (2.55x geo mean for the quadratic-time heuristic, vs. 2.58x for the linear-time heuristic). Both heuristics offer the same security properties, namely, mitigating LVI.
This patch also includes some formatting fixes.
Differential Revision: https://reviews.llvm.org/D84471
After the recent change to the tuning settings for pentium4 to improve our default 32-bit behavior, I've decided to see about implementing -mtune support. This way we could have a default architecture CPU of "pentium4" or "x86-64" and a default tuning cpu of "generic". And we could change our "pentium4" tuning settings back to what they were before.
As a step to supporting this, this patch separates all of the features lists for the CPUs into 2 lists. I'm using the Proc class and a new ProcModel class to concat the 2 lists before passing to the target independent ProcessorModel. Future work to truly support mtune would change ProcessorModel to take 2 lists separately. I've diffed the X86GenSubtargetInfo.inc file before and after this patch to ensure that the final feature list for the CPUs isn't changed.
Differential Revision: https://reviews.llvm.org/D84879
This patch addes time trace functionality to have a better understanding
of the analysis times.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84980
This includes basic support for computeKnownBits on abs. I've left FIXMEs for more complicated things we could do.
Differential Revision: https://reviews.llvm.org/D84963
Just the obvious implementation that rewrites the result type. Also fix
warning from EXTRACT_SUBVECTOR legalization that triggers on the test.
Differential Revision: https://reviews.llvm.org/D84706
The -harness option enables new testing use-cases for llvm-jitlink. It takes a
list of objects to treat as a test harness for any regular objects passed to
llvm-jitlink.
If any files are passed using the -harness option then the following
transformations are applied to all other files:
(1) Symbols definitions that are referenced by the harness files are promoted
to default scope. (This enables access to statics from test harness).
(2) Symbols definitions that clash with definitions in the harness files are
deleted. (This enables interposition by test harness).
(3) All other definitions in regular files are demoted to local scope.
(This causes untested code to be dead stripped, reducing memory cost and
eliminating spurious unresolved symbol errors from untested code).
These transformations allow the harness files to reference and interpose
symbols in the regular object files, which can be used to support execution
tests (including fuzz tests) of functions in relocatable objects produced by a
build.
This allows clients to detect invalid transformations applied by JITLink passes
(e.g. inserting or removing symbols in unexpected ways) and terminate linking
with an error.
This change is used to simplify the error propagation logic in
ObjectLinkingLayer.
Avoid recursively calling copyPhysReg for AGPR handling. This was
dropping the necessary super register implicit defs to avoid liveness
verifier errors.
Pass the abs poison flag to the underlying ConstantRange
implementation, allowing CVP to simplify based on it.
Importantly, this recognizes that abs with poison flag is actually
non-negative...
This fixes an assertion failure that was being triggered in
SelectionDAG::getZeroExtendInReg(), where it was trying to extend the <2xi32>
to i64 (which should have been <2xi64>).
Fixes: rdar://66016901
Differential Revision: https://reviews.llvm.org/D84884
Determine whether switch edges are feasible based on range information,
and remove non-feasible edges lateron.
This does not try to determine whether the default edge is dead,
as we'd have to determine that the range is fully covered by the
cases for that.
Another limitation here is that we don't remove dead cases that
have the same successor as a live case. I'm not handling this
because I wanted to keep the edge removal based on feasible edges
only, rather than inspecting ranges again there -- this does not
seem like a particularly useful case to handle.
Differential Revision: https://reviews.llvm.org/D84270
Currently we skip alias sets with only reads or a single write and no
reads, but still add the pointers to the list of pointers in RtCheck.
This can lead to cases where we try to access a pointer that does not
exist when grouping checks. In most cases, the way we access
PositionMap masked that, as the value would default to index 0.
But in the example in PR46854 it causes a crash.
This patch updates the logic to avoid adding pointers for alias sets
that do not need any checks. It makes things slightly more verbose, by
first checking the numbers of reads/writes and bailing out early if we don't
need checks for the alias set.
I think this makes the logic a bit simpler to follow.
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D84608
ThinLTO is run using a single thread on Linux on Power. The
compute_thread_count() routine calls getHostNumPhysicalCores which
returns -1 by default, and so `MaxThreadCount is set to 1.
unsigned llvm::ThreadPoolStrategy::compute_thread_count() const {
int MaxThreadCount = UseHyperThreads
? computeHostNumHardwareThreads()
: sys::getHostNumPhysicalCores();
if (MaxThreadCount <= 0)
MaxThreadCount = 1;
…
}
Fix: provide custom implementation of getHostNumPhysicalCores for
Linux on Power and Linux on Z.
Reviewed By: Kai, uweigand
Differential Revision: https://reviews.llvm.org/D84764
LLVM selection dag assumes "switch" indices are pointer sized, which causes problems for our 32-bit br_table. The new function ensures 32-bit operands don't get unnecessarily extended, and 64-bit operands get truncated.
Note that the changes to the existing test test exactly that: the addition of -NEXT in 2 places ensures no extension is inserted (which the test previously ignored) and that the wrap is present (previously omitted in wasm64 mode).
Differential Revision: https://reviews.llvm.org/D84705
We are using undef on the indirect move source subreg and then
using implicit super-reg. This creates a problem in RA when
Greedy decides to split the register. It reassigns the implicit
super-reg but does not bother to change undef source because
it is really does not matter. The fix is to stop lying to RA and
drop undef flag.
This has also hit a problem in SIFoldOperands as it can fold
immediate into an indirect move since there is no undef flag
anymore. That results in multiple test failures, so added the
check for this case.
Differential Revision: https://reviews.llvm.org/D84899
Problem:
Right now, our "Running pass" is not accurate when passes are wrapped in adaptor because adaptor is never skipped and a pass could be skipped. The other problem is that "Running pass" for a adaptor is before any "Running pass" of passes/analyses it depends on. (for example, FunctionToLoopPassAdaptor). So the order of printing is not the actual order.
Solution:
Doing things like PassManager::Debuglogging is very intrusive because we need to specify Debuglogging whenever adaptor is created. (Actually, right now we're not specifying Debuglogging for some sub-PassManagers. Check PassBuilder)
This patch move debug logging for pass as a PassInstrument callback. We could be sure that all running passes are logged and in the correct order.
This could also be used to implement hierarchy pass logging in legacy PM. We could also move logging of pass manager to this if we want.
The test fixes looks messy. It includes changes:
- Remove PassInstrumentationAnalysis
- Remove PassAdaptor
- If a PassAdaptor is for a real pass, the pass is added
- Pass reorder (to the correct order), related to PassAdaptor
- Add missing passes (due to Debuglogging not passed down)
Reviewed By: asbirlea, aeubanks
Differential Revision: https://reviews.llvm.org/D84774
Get rid of all fixmes and base heuristic on `num-clustered-dwords`. The main intuition behind this is as
follows. The existing heuristic roughly summarizes as below:
* Assume, all the mem ops instructions participating in the clustering process, loads/stores same num bytes
* If num bytes loaded by each mem op is 4 bytes, then cluster at max 5 mem ops, that is at max 20 bytes
* If num bytes loaded by each mem op is 8 bytes, then cluster at max 3 mem ops, that is at max 24 bytes
* If num bytes loaded by each mem op is 16 bytes, then cluster at max 2 mem ops, that is at max 32 bytes
So, we need to make sure that the new heuristic do not completey deviate away from the above one, and it
properly handles both the sub-word loads and the wide loads.
Reviewed By: arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D84354
In cases where the alignment of the datatype is smaller than
expected by the instruction, the address is aligned. The aligned
address is used for the load, but wasn't used for the store
conditional, which resulted in a run-time alignment exception.
We parse .arch so that some `.arch i386; .code32` code can assemble. It seems
that X86AsmParser does not do a good job tracking what features are needed to
assemble instructions. GNU as's x86 port supports a very wide range of .arch
operands. Ignore the operand for now.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D84900
We need to keep track of the alloca insertion point (which we already
communicate via the callback to the user) as we place allocas as well.
Reviewed By: fghanim, SouraVX
Differential Revision: https://reviews.llvm.org/D82470
The operand to these instructions is both input and output.
These are not yet emitted by the compiler and the assembler already
works fine, so can't test in this patch. But D75044 will use XPACI
and provide test coverage for this patch as well.
Differential Revision: https://reviews.llvm.org/D84298
Summary:
This patch implements -ffunction-sections on AIX.
This patch focuses on assembly generation.
Follow-on patch needs to handle:
1. -ffunction-sections implication for jump table.
2. Object file generation path and associated testing.
Differential Revision: https://reviews.llvm.org/D83875
This removes some unneeded block masks when we don't have any
reductions. It should not have any effect on codegen as the values
created are dead anyway.
Differential Revision: https://reviews.llvm.org/D81415
As far as I know, ipconstprop has not been used in years and ipsccp has
been used instead. This has the potential for confusion and sometimes
leads people to spend time finding & reporting bugs as well as
updating it to work with the latest API changes.
This patch moves the tests over to SCCP. There's one functional difference
I am aware of: ipconstprop propagates for each call-site individually, so
for functions that are called with different constant arguments it can sometimes
produce better results than ipsccp (at much higher compile-time cost).But
IPSCCP can be thought to do so as well for internal functions and as mentioned
earlier, the pass seems unused in practice (and there are no plans on working
towards enabling it anytime).
Also discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-July/143773.html
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84447
As long as we can extract the lowest 128-bit subvector from the pre-truncated source vector, then we don't care what size it is.
The next stage will be to support non-zero extraction indices, as long as its still coming from the lowest 128-bit subvector.
This patch makes the 'Length' field of the address range table optional.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84911
This patch makes the 'AddressSize' and 'SegmentSelectorSize' fields of
address range table optional.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84907
Summary:
In the phi-node-elimination pass, we set the killed flag incorrectly.
When we eliminate the PHI node, we replace the PHI with a copy for the
incoming value.
Before this patch, we will set incoming value as killed(PHICopy). And
we will remove the killed flag from last using incoming value(OldKill).
This is correct, only if the new PHICopy is after the OldKill.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D80886
When building code at -O0 We weren't falling back to DAG ISel correctly
when encountering alloca instructions with scalable vector types. This
is because the alloca has no operands that are scalable. I've fixed this by
adding a check in AArch64ISelLowering::fallBackToDAGISel for alloca
instructions with scalable types.
Differential Revision: https://reviews.llvm.org/D84746
Continue the change made to ParseATTOperand to take the vector by
reference. Let ParseMemOperand add its memory operand to the
vector and just return true/false to indicate error.
This change define RAII class `FileLocker` and methods `lock` and
`tryLockFor` of the class `raw_fd_stream` to facilitate using file locks.
Differential Revision: https://reviews.llvm.org/D79066
A '*' after the segment is equivalent to a '*' before the segment register. To make the AsmMatcher table work we need to place the '*' token into the operand vector before the full memory operand. To accomplish this I've modified some portions of operand parsing to expose the operand vector to ParseATTOperand so that the token can be pushed to the vector after parsing the segment register and before creating the memory operand using that segment register.
Fixes PR46879
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D84895
Summary:
Some instructions have set the wrong [RM] flag, this patch is to fix it.
Instructions x(v|s)r(d|s)pi[zmp]? and fri[npzm] use fixed rounding
directions without referencing current rounding mode.
Also, the SETRNDi, SETRND, BCLRn, MTFSFI, MTFSB0, MTFSB1, MTFSFb,
MTFSFI, MTFSFI_rec, MTFSF, MTFSF_rec should also fix the RM flag.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D81360
This patch makes JumpThreading fold br(freeze(undef)) if the freeze instruction
is only used by the branch.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84818
I still think it's highly questionable that we have two intrinsics
with identical behavior and only vary by the name of the libcall used
if it happens to be lowered that way, but try to reduce the feature
delta between SDAG and GlobalISel for recently added intrinsics. I'm
not sure which opcode should be considered the canonical one, but
lower roundeven back to round.
Further abstracting the specification of a tensor, to more easily
support different types and shapes of tensor, and also to perform
initialization up-front, at TFModelEvaluator construction time.
Differential Revision: https://reviews.llvm.org/D84685
This change is mechanical, it just removes the restriction and updates tests. The key building blocks were submitted in 31342eb and 8fe2abc.
Note that this (and preceeding changes) entirely subsumes D83965. I did includes a couple of it's tests.
From the codegen changes, an interesting observation: this doesn't actual reduce spilling, it just let's the register allocator do it's job. That results in a slightly different overall result which has both pros and cons over the eager spill lowering. (i.e. We'll have some perf tuning to do once this is stable.)
This adds a common API for compute constant ranges of intrinsics.
The intention here is that
a) we can reuse the same code across different passes that handle
constant ranges, i.e. this can be reused in SCCP
b) we only have to add knowledge about supported intrinsics to
ConstantRange, not any consumers.
Differential Revision: https://reviews.llvm.org/D84587
Instead of never accepting v8f32/v4f64 FHADD/FHSUB if the input shuffle masks cross lanes, perform the matching and determine if the post shuffle mask simplifies to a 'whole lane shuffle' mask - in which case we are guaranteed to cheaply perform this as a VPERM2F128 shuffle.
This reverts the revert commit dc28675768.
It includes a fix for Polly, which uses SCEVExpander on IR that is not
in LCSSA form. Set PreserveLCSSA = false in that case, to ensure we do
not introduce LCSSA phis where there were none before.
MFMA instructions shall not be scheduled back to back
to avoid MAI SIMD stall. Tell post-RA schedule we would
prefer some other instruction instead.
Differential Revision: https://reviews.llvm.org/D84883
Adds frontend and backend options to enable and disable the
PowerPC paired vector memory operations added in ISA 3.1.
Instructions using these options will be added in subsequent patches.
Differential Revision: https://reviews.llvm.org/D83722
Adds the -fast-16-labels flag, which enables efficient instrumentation
for DFSan when the user needs <=16 labels. The instrumentation
eliminates most branches and most calls to __dfsan_union or
__dfsan_union_load.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D84371
Change the way we track how a particular pointer was relocated at a statepoint in selection dag. Previously, we used an optional<location> for the spill lowering, and a block local Register for the newly introduced vreg lowering. Combine all three lowerings (norelocate, spill, and vreg) into a single helper class, and keep a single copy of the information.
This is submitted separately as it really does make the code more readible on it's own, but the indirect motivation is to move vreg tracking from StatepointLowering to FunctionLoweringInfo. This is the last piece needed to support cross block relocations with vregs; that will follow in a separate (non-NFC) patch.
In future, we'd like to use the perfect-shuffle mechanism to deal with these
shuffle permutations. For now, this improves performance by avoiding the
super-expensive const-pool load + tbl instruction.
Differential Revision: https://reviews.llvm.org/D84866
This reverts commit 99166fd4fb, because it
breaks the polly builders.
polly/test/Isl/CodeGen/invariant_load_escaping_second_scop.ll fails
because a apparently unnecessary LCSSA phi node is introduced.
Make the bots green again, while I take a closer look.
Aditya Kumar