This was discovered to be necessary while running memchr-01.ll with
-verify-machinstrs, because it is not allowed to have a phys reg live
accross block boundaries while on SSA form, if the register is
allocatable (expect in entry block and landing pads).
In this test case, stringRRE pseudos are expanded after isel by adding
a loop block which produces a live out CC register. To make the test
pass, it was also necessary to not say that StringRRELoop pseudo uses
R0L, this is only true for the StringRRE opcode.
-verify-machineinstrs added to memchr-01.ll test.
New test case int-cmp-51.ll to test that MachineCSE can eliminate
an identical compare (which it couldn't do before).
Reviewed by Ulrich Weigand
llvm-svn: 251634
Summary:
This commit resolves wrong opcodes for ll and sc instructions for r6 architecutres, which were generated in method MipsTargetLowering::emitAtomicBinary.
Author: Jelena.Losic
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13593
llvm-svn: 251629
Summary:
The microMIPS register class GPRMM16 does not contain the $zero register.
However, MipsSEDAGToDAGISel::replaceUsesWithZeroReg() would replace uses
of the $dst register:
[d]addiu, $dst, $zero, 0
with the $zero register, without checking for membership in the register
class of the target machine operand.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13984
llvm-svn: 251622
Since the verifier will give false reports if it incorrectly thinks MI is
loading or storing using an FI, it is necessary to scan memoperands and
find out how the FI is used in the instruction. This should be relatively
rare.
Needed to make CodeGen/SystemZ/spill-01.ll pass, which now runs with this flag.
Reviewed by Quentin Colombet.
llvm-svn: 251620
Summary:
Conversion opcode name format should be f64.convert_u/i64 not f64_convert_u
Author: s3ththompson
Reviewers: jfb
Subscribers: sunfish, jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D14160
llvm-svn: 251613
We cannot form ctr-based loops around function calls, including calls to
__tls_get_addr used for PIC TLS variables. References to such TLS variables,
however, might be buried within constant expressions, and so we need to search
the entire constant expression to be sure that no references to such TLS
variables exist.
Fixes PR25256, reported by Eric Schweitz. This is a slightly-modified version
of the patch suggested by Eric in the bug report, and a test case I created.
llvm-svn: 251582
As a follow-up to r251566, do the same for the other optionally-supported
register classes (mostly for vector registers). Don't return an unavailable
register class (which would cause an assert later), but fail cleanly when
provided an unsupported inline asm constraint.
llvm-svn: 251575
At the LLVM level this ABI is essentially a minimal modification of AAPCS to
support 16-byte alignment for vector types and the stack.
llvm-svn: 251570
cntlz is the old POWER mnemonic. cntlzw is the PowerPC mnemonic.
This change fixes an issue when -no-integrated-as: The opcode cntlz is
unrecognized by gas
Alias the POWER mnemonic cntlz[.] to the PowerPC mnemonic cntlzw[.]
This is done for because the POWER cntlz mnemonic has be used by LLVM for
a very long time. We need to make sure that assembly programs
that are using the cntlz[.] do not break with this change.
Change PowerPC tests to reflect the insn change from cntlz to cntlzw.
Add assembly test to verify cntlz[.] is encoded correctly.
Patch by Tom Rix!
llvm-svn: 251489
Summary:
Don't call `computeKnownBitsFromRangeMetadata` for extended loads --
this can cause a mismatch between the width of the !range metadata and
the width of the APInt's accumulating `KnownZero` (and `KnownOne` in the
future). This isn't a problem now, but will be after a future change.
Note: this can be made more aggressive in the future.
Reviewers: nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14107
llvm-svn: 251486
This is a usage of the IR-level fast-math-flags now that they are propagated to SDNodes.
This was originally part of D8900.
Removing the global 'enable-unsafe-fp-math' checks will require auto-upgrade and
possibly other changes.
Differential Revision: http://reviews.llvm.org/D9708
llvm-svn: 251450
This recommits r250719, which caused a failure in SPEC2000.gcc
because of the incorrect insert point for the new wider load.
Convert two halfword loads into a single 32-bit word load with bitfield extract
instructions. For example :
ldrh w0, [x2]
ldrh w1, [x2, #2]
becomes
ldr w0, [x2]
ubfx w1, w0, #16, #16
and w0, w0, #ffff
llvm-svn: 251438
When optimization is disabled, edge weights that are stored in MBB won't be used so that we don't have to store them. Currently, this is done by adding successors with default weight 0, and if all successors have default weights, the weight list will be empty. But that the weight list is empty doesn't mean disabled optimization (as is stated several times in MachineBasicBlock.cpp): it may also mean all successors just have default weights.
We should discourage using default weights when adding successors, because it is very easy for users to forget update the correct edge weights instead of using default ones (one exception is that the MBB only has one successor). In order to detect such usages, it is better to differentiate using default weights from the case when optimizations is disabled.
In this patch, a new interface addSuccessorWithoutWeight(MBB*) is created for when optimization is disabled. In this case, MBB will try to maintain an empty weight list, but it cannot guarantee this as for many uses of addSuccessor() whether optimization is disabled or not is not checked. But it can guarantee that if optimization is enabled, then the weight list always has the same size of the successor list.
Differential revision: http://reviews.llvm.org/D13963
llvm-svn: 251429
convert float to half with mask/maskz for the reg to reg version and mask for the reg to mem version (there is no maskz version for reg to mem).
Differential Revision: http://reviews.llvm.org/D14113
llvm-svn: 251409
Summary: After D13851 landed, we saw backend crashes when compiling the reduced test case included in this patch. The right fix seems to be to allow these vector types for expansion in instruction selection.
Reviewers: rengolin, t.p.northover
Subscribers: RKSimon, t.p.northover, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14082
llvm-svn: 251401
GNU tools require elfiamcu to take up the entire OS field, so, e.g.
i?86-*-linux-elfiamcu is not considered a legal triple.
Make us compatible.
Differential Revision: http://reviews.llvm.org/D14081
llvm-svn: 251390
When taking the remainder of a value divided by a constant, visitREM()
attempts to convert the REM to a longer but faster sequence of instructions.
This conversion calls combine() on a speculative DIV instruction. Commit
rL250825 may cause this combine() to return a DIVREM, corrupting nearby nodes.
Flow eventually hits unreachable().
This patch adds a test case and a check to prevent visitREM() from trying
to convert the REM instruction in cases where a DIVREM is possible.
See http://reviews.llvm.org/D14035
llvm-svn: 251373
Both VLDRS and VLDRD fault if the memory is not 4 byte aligned, which wasn't
really being checked before, leading to faults at runtime.
llvm-svn: 251352
In PIC mode we were previously computing global variable addresses (or GOT
entry addresses) by adding the PC, the PC-relative GOT displacement and
the GOT-relative symbol/GOT entry displacement. Because the latter two
displacements are fixed, we ended up performing one more addition than
necessary.
This change causes us to compute addresses using a single PC-relative
displacement, resulting in a shorter code sequence. This reduces code size
by about 4% in a recent build of Chromium for Android.
As a result of this change we no longer need to compute the GOT base address
in the ARM backend, which allows us to remove the Global Base Reg pass and
SDAG lowering for the GOT.
We also now no longer use the GOT when addressing a symbol which is known
to be defined in the same linkage unit. Specifically, the symbol must have
either hidden visibility or a strong definition in the current module in
order to not use the the GOT.
This is a change from the previous behaviour where we would use the GOT to
address externally visible symbols defined in the same module. I think the
only cases where this could matter are cases involving symbol interposition,
but we don't really support that well anyway.
Differential Revision: http://reviews.llvm.org/D13650
llvm-svn: 251322
Instead of XFAIL-ing the tests with the wrong usage of the "interrupt"
attribute, we should check that we emit the correct error messages to
the user.
llvm-svn: 251295
Summary:
This patch adds support for using the "interrupt" attribute on Mips
for interrupt handling functions. At this time only mips32r2+ with the
o32 ABI with the static relocation model is supported. Unsupported
configurations will be rejected
Patch by Simon Dardis (+ clang-format & some trivial changes to follow the
LLVM coding standards by me).
Reviewers: mpf, dsanders
Subscribers: dsanders, vkalintiris, llvm-commits
Differential Revision: http://reviews.llvm.org/D10768
llvm-svn: 251286
When the target does not support these intrinsics they should be converted to a chain of scalar load or store operations.
If the mask is not constant, the scalarizer will build a chain of conditional basic blocks.
I added isLegalMaskedGather() isLegalMaskedScatter() APIs.
Differential Revision: http://reviews.llvm.org/D13722
llvm-svn: 251237
When using the MCU psABI, compiler-generated library calls should pass
some parameters in-register. However, since inreg marking for x86 is currently
done by the front end, it will not be applied to backend-generated calls.
This is a workaround for PR3997, which describes a similar issue for -mregparm.
Differential Revision: http://reviews.llvm.org/D13977
llvm-svn: 251223
We don't need a mask of a rotation result to be a constant splat - any constant scalar/vector can be usefully folded.
Followup to D13851.
llvm-svn: 251197
This patch adds support for lowering to the XOP VPROT / VPROTI vector bit rotation instructions.
This has required changes to the DAGCombiner rotation pattern matching to support vector types - so far I've only changed it to support splat vectors, but generalising this further is feasible in the future.
Differential Revision: http://reviews.llvm.org/D13851
llvm-svn: 251188
Summary:
The logic here isn't straightforward because our support for
TargetOptions::GuaranteedTailCallOpt.
Also fix a bug where we were allowing tail calls to cdecl functions from
fastcall and vectorcall functions. We were special casing thiscall and
stdcall callers rather than checking for any convention that requires
clearing stack arguments before returning.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14024
llvm-svn: 251137
Summary:
When ARMFrameLowering::emitPopInst generates a "pop" instruction to restore the callee saved registers, it checks if the LR register is among them. If so, the function may decide to remove the basic block's terminator and replace it with a "pop" to the PC register instead of LR.
This leads to a problem when the block's terminator is preceded by a "llvm.debugtrap" call. The MI iterator points to the trap in such a case, which is also a terminator. If the function decides to restore LR to PC, it erroneously removes the trap.
Reviewers: asl, rengolin
Subscribers: aemerson, jfb, rengolin, dschuff, llvm-commits
Differential Revision: http://reviews.llvm.org/D13672
llvm-svn: 251123
Summary:
This ensures that BranchFolding (and similar) won't remove these blocks.
Also allow AsmPrinter::EmitBasicBlockStart to process MBBs which are
address-taken but do not have BBs that are address-taken, since otherwise
its call to getAddrLabelSymbolTableToEmit would fail an assertion on such
blocks. I audited the other callers of getAddrLabelSymbolTableToEmit
(and getAddrLabelSymbol); they all have BBs known to be address-taken
except for the call through getAddrLabelSymbol from
WinException::create32bitRef; that call is actually now unreachable, so
I've removed it and updated the signature of create32bitRef.
This fixes PR25168.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13774
llvm-svn: 251113
When we fold "mul ((add x, c1), c1)" -> "add ((mul x, c2), c1*c2)", we bail if (add x, c1) has multiple
users which would result in an extra add instruction.
In such cases, this patch adds a check to see if we can eliminate a multiply instruction in exchange for the extra add.
I also added the capability of doing the existing optimization with non-splatted vectors (splatted also works).
Differential Revision: http://reviews.llvm.org/D13740
llvm-svn: 251028
Summary:
Hyphens were missing from the triple, causing it to be parsed
incorrectly. This patch updates the triple and makes necessary
changes to the expected output.
Patch is from Vinicius Tinti.
Reviewers: ab, tinti
Subscribers: srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D13792
llvm-svn: 251020
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
This reapplies r242300 which was reverted in r242428 due to bot failures.
Ultimately those failures were spurious and completely unrelated to this commit. I reverted this
at the time because it was thought to be at fault.
llvm-svn: 250969
There may be other use operands that also need their kill flags cleared.
This happens in a few tests when SIFoldOperands is moved after
PeepholeOptimizer.
PeepholeOptimizer rewrites cases that look like:
%vreg0 = ...
%vreg1 = COPY %vreg0
use %vreg1<kill>
%vreg2 = COPY %vreg0
use %vreg2<kill>
to use the earlier source to
%vreg0 = ...
use %vreg0
use %vreg0
Currently SIFoldOperands sees the copied registers, so there is
only one use. So far I haven't managed to come up with a test
that currently has multiple uses of a foldable VGPR -> VGPR copy.
llvm-svn: 250960
Summary:
Previously, we were inserting an InlineAsm statement for each line of the
inline assembly. This works for GAS but it triggers prologue/epilogue
emission when IAS is in use. This caused:
.set noreorder
.cpload $25
to be emitted as:
.set push
.set reorder
.set noreorder
.set pop
.set push
.set reorder
.cpload $25
.set pop
which led to assembler errors and caused the test to fail.
The whitespace-after-comma changes included in this patch are necessary to
match the output when IAS is in use.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13653
llvm-svn: 250895
When we have to convert the masked.load, masked.store to scalar code, we generate a chain of conditional basic blocks.
I added optimization for constant mask vector.
Differential Revision: http://reviews.llvm.org/D13855
llvm-svn: 250893
Summary:
The forwards compatibility strategy employed by MIPS is to consider registers
to be infinitely sign-extended. Then on ISA's with a wider register, the result
of existing instructions are sign-extended to register width and zero-extended
counterparts are added. copy_u.w on MSA32 and copy_u.w on MSA64 violate this
strategy and we have therefore corrected the MSA specs to fix this.
We still keep track of sign/zero-extension during legalization but we now
match copy_s.[wd] where required.
No change required to clang since __builtin_msa_copy_u_[wd] will map to
copy_s.[wd] where appropriate for the target.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13472
llvm-svn: 250887
A mem-to-mem instruction (that both loads and stores), which store to an
FI, cannot pass the verifier since it thinks it is loading from the FI.
For the mem-to-mem instruction, do a looser check in visitMachineOperand()
and only check liveness at the reg-slot while analyzing a frame index operand.
Needed to make CodeGen/SystemZ/xor-01.ll pass with -verify-machineinstrs,
which now runs with this flag.
Reviewed by Evan Cheng and Quentin Colombet.
llvm-svn: 250885
Do not tail duplicate blocks where the successor has a phi node,
and the corresponding value in that phi node uses a subregister.
http://reviews.llvm.org/D13922
llvm-svn: 250877
C/C++ code can declare an extern function, which will show up as an import in WebAssembly's output. It's expected that the linker will resolve these, and mark unresolved imports as call_import (I have a patch which does this in wasmate).
llvm-svn: 250875
Summary:
TargetLoweringBase::Expand is defined as "Try to expand this to other ops,
otherwise use a libcall." For ISD::UDIV and ISD::SDIV, the choice between
the two possibilities was defined in a rather convoluted way:
- if DIVREM is legal, expand to DIVREM
- if DIVREM has a custom lowering, expand to DIVREM
- if DIVREM libcall is defined and a remainder from the same division is
computed elsewhere, expand to a DIVREM libcall
- else, expand to a DIV libcall
This had the undesirable effect that if both DIV and DIVREM are implemented
as libcalls, then ISD::UDIV and ISD::SDIV are expanded to the heavier DIVREM
libcall, even when the remainder isn't used.
The new code adds a new LegalizeAction, TargetLoweringBase::LibCall, so that
backends can directly control whether they prefer an expansion or a conversion
to a libcall. This makes the generic lowering code even more generic,
allowing its reuse in a wider range of target-specific configurations.
The useful effect is that ARM backend will now generate a call
to __aeabi_{i,u}div rather than __aeabi_{i,u}divmod in cases where
it doesn't need the remainder. There's no functional change outside
the ARM backend.
Reviewers: t.p.northover, rengolin
Subscribers: t.p.northover, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D13862
llvm-svn: 250826
The mask value type for maskload/maskstore GCC builtins is never a vector of
packed floats/doubles.
This patch fixes the following issues:
1. The mask argument for builtin_ia32_maskloadpd and builtin_ia32_maskstorepd
should be of type llvm_v2i64_ty and not llvm_v2f64_ty.
2. The mask argument for builtin_ia32_maskloadpd256 and
builtin_ia32_maskstorepd256 should be of type llvm_v4i64_ty and not
llvm_v4f64_ty.
3. The mask argument for builtin_ia32_maskloadps and builtin_ia32_maskstoreps
should be of type llvm_v4i32_ty and not llvm_v4f32_ty.
4. The mask argument for builtin_ia32_maskloadps256 and
builtin_ia32_maskstoreps256 should be of type llvm_v8i32_ty and not
llvm_v8f32_ty.
Differential Revision: http://reviews.llvm.org/D13776
llvm-svn: 250817
This wasn't doing anything useful. They weren't explicitly used
anywhere, and the RegScavenger ignores reserved registers.
This for some reason caused a random scheduling change in the test.
Getting the check lines to pass is too frustrating, and there's probably
not too much value in checking the vector case's operands N times.
llvm-svn: 250794
Currently, in MachineBlockPlacement pass the loop is rotated to let the best exit to be the last BB in the loop chain, to maximize the fall-through from the loop to outside. With profile data, we can determine the cost in terms of missed fall through opportunities when rotating a loop chain and select the best rotation. Basically, there are three kinds of cost to consider for each rotation:
1. The possibly missed fall through edge (if it exists) from BB out of the loop to the loop header.
2. The possibly missed fall through edges (if they exist) from the loop exits to BB out of the loop.
3. The missed fall through edge (if it exists) from the last BB to the first BB in the loop chain.
Therefore, the cost for a given rotation is the sum of costs listed above. We select the best rotation with the smallest cost. This is only for PGO mode when we have more precise edge frequencies.
Differential revision: http://reviews.llvm.org/D10717
llvm-svn: 250754
Convert two halfword loads into a single 32-bit word load with bitfield extract
instructions. For example :
ldrh w0, [x2]
ldrh w1, [x2, #2]
becomes
ldr w0, [x2]
ubfx w1, w0, #16, #16
and w0, w0, #ffff
llvm-svn: 250719
Emit the CFI instructions after all code transformation have been done.
This will avoid any interference between CFI instructions and packetization.
llvm-svn: 250714
The mapping of these two intrinsics in ARMInstrInfo.td had a small
omission which lead to their operands not being validated/transformed
before being lowered into usat and ssat instructions. This can cause
incorrect instructions to be emitted.
I've also added tests for the remaining two saturating arithmatic
intrinsics @llvm.arm.qadd and @llvm.arm.qsub as they are missing
codegen tests.
llvm-svn: 250697
Add FastISel support for SSE4A scalar float / double non-temporal stores
Follow up to D13698
Differential Revision: http://reviews.llvm.org/D13773
llvm-svn: 250610
Summary:
This is a temporary hack until we get around to remapping the vreg
numbers to local numbers. Dead vregs cause bad numbering and make
consumers sad.
We could also just look at debug info an use named locals instead, but
vregs have to work properly anyways so there!
Reviewers: binji, sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13839
llvm-svn: 250594
Summary:
Some shared code for handling eh.exceptionpointer and eh.exceptioncode
needs to not share the part that truncates to 32 bits, which is intended
just for exception codes.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13747
llvm-svn: 250588
Our previous value of "16 + 8 + MaxCallFrameSize" for ParentFrameOffset
is incorrect when CSRs are involved. We were supposed to have a test
case to catch this, but it wasn't very rigorous.
The main effect here is that calling _CxxThrowException inside a
catchpad doesn't immediately crash on MOVAPS when you have an odd number
of CSRs.
llvm-svn: 250583
The motivation for this patch starts with PR20134:
https://llvm.org/bugs/show_bug.cgi?id=20134
void foo(int *a, int i) {
a[i] = a[i+1] + a[i+2];
}
It seems better to produce this (14 bytes):
movslq %esi, %rsi
movl 0x4(%rdi,%rsi,4), %eax
addl 0x8(%rdi,%rsi,4), %eax
movl %eax, (%rdi,%rsi,4)
Rather than this (22 bytes):
leal 0x1(%rsi), %eax
cltq
leal 0x2(%rsi), %ecx
movslq %ecx, %rcx
movl (%rdi,%rcx,4), %ecx
addl (%rdi,%rax,4), %ecx
movslq %esi, %rax
movl %ecx, (%rdi,%rax,4)
The most basic problem (the first test case in the patch combines constants) should also be fixed in InstCombine,
but it gets more complicated after that because we need to consider architecture and micro-architecture. For
example, AArch64 may not see any benefit from the more general transform because the ISA solves the sexting in
hardware. Some x86 chips may not want to replace 2 ADD insts with 1 LEA, and there's an attribute for that:
FeatureSlowLEA. But I suspect that doesn't go far enough or maybe it's not getting used when it should; I'm
also not sure if FeatureSlowLEA should also mean "slow complex addressing mode".
I see no perf differences on test-suite with this change running on AMD Jaguar, but I see small code size
improvements when building clang and the LLVM tools with the patched compiler.
A more general solution to the sext(add nsw(x, C)) problem that works for multiple targets is available
in CodeGenPrepare, but it may take quite a bit more work to get that to fire on all of the test cases that
this patch takes care of.
Differential Revision: http://reviews.llvm.org/D13757
llvm-svn: 250560
Summary:
We now use the block for the catchpad itself, rather than its normal
successor, as the funclet entry.
Putting the normal successor in the map leads downstream funclet
membership computations to erroneous results.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D13798
llvm-svn: 250552
Summary: The syntax has changed a bit recently.
Reviewers: binji
Subscribers: llvm-commits, jfb, sunfish, dschuff
Differential Revision: http://reviews.llvm.org/D13821
llvm-svn: 250535
Summary:
When a cleanup's cleanupendpad or cleanupret targets a catchendpad, stop
trying to propagate the cleanup's parent's color to the catchendpad, since
what's needed is the cleanup's grandparent's color and the catchendpad
will get that color from the catchpad linkage already. We already had
this exclusion for invokes, but were missing it for
cleanupendpad/cleanupret.
Also add a missing line that tags cleanupendpads' states in the
EHPadStateMap, without with lowering invokes that target cleanupendpads
which unwind to other handlers (and so don't have the -1 state) will fail.
This fixes the reduced IR repro in PR25163.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13797
llvm-svn: 250534
Summary:
Follow the same syntax as for the spec repo. Both have evolved slightly
independently and need to converge again.
This, along with wasmate changes, allows me to do the following:
echo "int add(int a, int b) { return a + b; }" > add.c
./out/bin/clang -O2 -S --target=wasm32-unknown-unknown add.c -o add.wack
./experimental/prototype-wasmate/wasmate.py add.wack > add.wast
./sexpr-wasm-prototype/out/sexpr-wasm add.wast -o add.wasm
./sexpr-wasm-prototype/third_party/v8-native-prototype/v8/v8/out/Release/d8 -e "print(WASM.instantiateModule(readbuffer('add.wasm'), {print:print}).add(42, 1337));"
As you'd expect, the d8 shell prints out the right value.
Reviewers: sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13712
llvm-svn: 250480
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags. I fixed some of this issue in D13680 but had missed INC/DEC.
This patch adds the missing EFLAGS definition.
llvm-svn: 250438
Summary:
x86 codegen is clever about generating good code for relaxed
floating-point operations, but it was being silly when globals and
immediates were involved, forgetting where the global was and
loading/storing from/to the wrong place. The same applied to hard-coded
address immediates.
Don't let it forget about the displacement.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25171
A very similar bug when doing floating-points atomics to the stack is
also fixed by this patch.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25144
Reviewers: pete
Subscribers: llvm-commits, majnemer, rsmith
Differential Revision: http://reviews.llvm.org/D13749
llvm-svn: 250429
Summary:
The -mcpu=mips16 option caused the Integrated Assembler to crash because
it couldn't figure out the architecture revision number to write to the
.MIPS.abiflags section. This CPU definition has been removed because, like
microMIPS, MIPS16 is an ASE to a base architecture.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13656
llvm-svn: 250407
AVX-512 bit shuffle fails on 32 bit since we create a vector of 64-bit constants.
I split 8x64-bit const vector to 16x32 on 32-bit mode.
Differential Revision: http://reviews.llvm.org/D13644
llvm-svn: 250390
Recommit r250342: move coal-sections-powerpc.s to subdirectory for powerpc.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250370
Recommit r250342: add -arch=ppc32 to the RUN lines of powerpc tests.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250349
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250342
PR25157 identifies a bug where a load plus a vector shuffle is
incorrectly converted into an LXVDSX instruction. That optimization
is only valid if the load is of a doubleword, and in the noted case,
it was not. This corrects that problem.
Joint patch with Eric Schweitz, who provided the bugpoint-reduced test
case.
llvm-svn: 250324
This patch teaches x86 fast-isel how to select nontemporal stores.
On x86, we can use MOVNTI for nontemporal stores of doublewords/quadwords.
Instructions (V)MOVNTPS/PD/DQ can be used for SSE2/AVX aligned nontemporal
vector stores.
Before this patch, fast-isel always selected 'movd/movq' instead of 'movnti'
for doubleword/quadword nontemporal stores. In the case of nontemporal stores
of aligned vectors, fast-isel always selected movaps/movapd/movdqa instead of
movntps/movntpd/movntdq.
With this patch, if we use SSE2/AVX intrinsics for nontemporal stores we now
always get the expected (V)MOVNT instructions.
The lack of fast-isel support for nontemporal stores was spotted when analyzing
the -O0 codegen for nontemporal stores.
Differential Revision: http://reviews.llvm.org/D13698
llvm-svn: 250285
Summary:
Emit the handler and clause locations immediately after the standard
xdata.
Clauses are emitted in the same order and format used to communiate them
to the CLR Execution Engine.
Add a lit test to verify correct table generation on a small but
interesting example function.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, AndyAyers, llvm-commits
Differential Revision: http://reviews.llvm.org/D13451
llvm-svn: 250219
The comment says this was stopped because it was unlikely to be
profitable. This is not true if you want to combine vector loads
with multiple components.
For a simple case that looks like
t0 = load t0 ...
t1 = load t0 ...
t2 = load t0 ...
t3 = load t0 ...
t4 = store t0:1, t0:1
t5 = store t4, t1:0
t6 = store t5, t2:0
t7 = store t6, t3:0
We want to get all of these stores onto a chain
that is a TokenFactor of these N loads. This mostly
solves the AMDGPU merge-stores.ll regressions
with -combiner-alias-analysis for merging vector
stores of vector loads.
llvm-svn: 250138
Summary:
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags.
This patch adds the missing EFLAGS definition.
Floating point operations don't set flags, the subsequent fadd
optimization is therefore correct. The same applies for surrounding
load/store optimizations.
Reviewers: rsmith, rtrieu
Subscribers: llvm-commits, reames, morisset
Differential Revision: http://reviews.llvm.org/D13680
llvm-svn: 250135
This basic combine was surprisingly missing.
AMDGPU legalizes many operations in terms of 32-bit vector components,
so not doing this results in many extra copies and subregister extracts
that need to be cleaned up later.
InstCombine already does this for the hasOneUse case. The target hook
is to fix a handful of tests which break (e.g. ARM/vmov.ll) which turn
from a vector materialize repeated immediate instruction to a constant
vector load with more scalar copies from it.
llvm-svn: 250129
When lowering invoke statement, all unwind destinations are directly added as successors of call site block, and the weight of those new edges are not assigned properly. Actually, default weight 16 are used for those edges. This patch calculates the proper edge weights for those edges when collecting all unwind destinations.
Differential revision: http://reviews.llvm.org/D13354
llvm-svn: 250119
We made them SP relative back in March (r233137) because that's the
value the runtime passes to EH functions. With the new cleanuppad IR,
funclets adjust their frame argument from SP to FP, so our offsets
should now be FP-relative.
llvm-svn: 250088
Function LowerVSETCC (in X86ISelLowering.cpp) worked under the wrong
assumption that for non-AVX512 targets, the source type and destination type
of a type-legalized setcc node were always the same type.
This assumption was unfortunately incorrect; the type legalizer is not always
able to promote the return type of a setcc to the same type as the first
operand of a setcc.
In the case of a vsetcc node, the legalizer firstly checks if the first input
operand has a legal type. If so, then it promotes the return type of the vsetcc
to that same type. Otherwise, the return type is promoted to the 'next legal
type', which, for vectors of MVT::i1 is always a 128-bit integer vector type.
Example (-mattr=+avx):
%0 = trunc <8 x i32> %a to <8 x i23>
%1 = icmp eq <8 x i23> %0, zeroinitializer
The initial selection dag for the code above is:
v8i1 = setcc t5, t7, seteq:ch
t5: v8i23 = truncate t2
t2: v8i32,ch = CopyFromReg t0, Register:v8i32 %vreg1
t7: v8i32 = build_vector of all zeroes.
The type legalizer would firstly check if 't5' has a legal type. If so, then it
would reuse that same type to promote the return type of the setcc node.
Unfortunately 't5' is of illegal type v8i23, and therefore it cannot be used to
promote the return type of the setcc node. Consequently, the setcc return type
is promoted to v8i16. Later on, 't5' is promoted to v8i32 thus leading to the
following dag node:
v8i16 = setcc t32, t25, seteq:ch
where t32 and t25 are now values of type v8i32.
Before this patch, function LowerVSETCC would have wrongly expanded the setcc
to a single X86ISD::PCMPEQ. Surprisingly, ISel was still able to match an
instruction. In our case, ISel would have matched a VPCMPEQWrr:
t37: v8i16 = X86ISD::VPCMPEQWrr t36, t25
However, t36 and t25 are both VR256, while the result type is instead of class
VR128. This inconsistency ended up causing the insertion of COPY instructions
like this:
%vreg7<def> = COPY %vreg3; VR128:%vreg7 VR256:%vreg3
Which is an invalid full copy (not a sub register copy).
Eventually, the backend would have hit an UNREACHABLE "Cannot emit physreg copy
instruction" in the attempt to expand the malformed pseudo COPY instructions.
This patch fixes the problem adding the missing logic in LowerVSETCC to handle
the corner case of a setcc with 128-bit return type and 256-bit operand type.
This problem was originally reported by Dimitry as PR25080. It has been latent
for a very long time. I have added the minimal reproducible from that bugzilla
as test setcc-lowering.ll.
Differential Revision: http://reviews.llvm.org/D13660
llvm-svn: 250085
Summary:
This removes unnecessary instructions when extracting from an undefined register
and also fixes a crash for O32 when passing undef to a double argument in
held in integer registers.
Reviewers: vkalintiris
Subscribers: llvm-commits, zoran.jovanovic, petarj
Differential Revision: http://reviews.llvm.org/D13467
llvm-svn: 250039
This patch fixes a problem in function 'combineX86ShuffleChain' that causes a
chain of shuffles to be wrongly folded away when the combined shuffle mask has
only one element.
We may end up with a combined shuffle mask of one element as a result of
multiple calls to function 'canWidenShuffleElements()'.
Function canWidenShuffleElements attempts to simplify a shuffle mask by widening
the size of the elements being shuffled.
For every pair of shuffle indices, function canWidenShuffleElements checks if
indices refer to adjacent elements. If all pairs refer to "adjacent" elements
then the shuffle mask is safely widened. As a consequence of widening, we end up
with a new shuffle mask which is half the size of the original shuffle mask.
The byte shuffle (pshufb) from test pr24562.ll has a mask of all SM_SentinelZero
indices. Function canWidenShuffleElements would combine each pair of
SM_SentinelZero indices into a single SM_SentinelZero index. So, in a
logarithmic number of steps (4 in this case), the pshufb mask is simplified to
a mask with only one index which is equal to SM_SentinelZero.
Before this patch, function combineX86ShuffleChain wrongly assumed that a mask
of size one is always equivalent to an identity mask. So, the entire shuffle
chain was just folded away as the combined shuffle mask was treated as a no-op
mask.
With this patch we know check if the only element of a combined shuffle mask is
SM_SentinelZero. In case, we propagate a zero vector.
Differential Revision: http://reviews.llvm.org/D13364
llvm-svn: 250027
The XOP vector integer comparisons can deal with all signed/unsigned comparison cases directly and can be easily commuted as well (D7646).
llvm-svn: 249976
expandPostRAPseudo():
STX -> 2 * STD: The first STD should not have the kill flag set for the address.
SystemZElimCompare:
BRC -> BRCT conversion: Don't forget to remove the CC<use,kill> operand.
Needed to make SystemZ/asm-17.ll pass with -verify-machineinstrs, which
now runs with this flag.
Reviewed by Ulrich Weigand.
llvm-svn: 249945
The new implementation works at least as well as the old implementation
did.
Also delete the associated preparation tests. They don't exercise
interesting corner cases of the new implementation. All the codegen
tests of the EH tables have already been ported.
llvm-svn: 249918
Also Fix a buglet where SEH tables had ranges that spanned funclets.
The remaining tests using the old landingpad IR are preparation tests,
and will be deleted along with the old preparation.
llvm-svn: 249917
x64 catchpads use rax to inform the unwinder where control should go
next. However, we must initialize rax before the epilogue sequence so
as to not perturb the unwinder.
llvm-svn: 249910
This occurred due to introducing the invalid i64 type after type
legalization had already finished, in an attempt to workaround bitcast
f64 -> v2i32 not doing constant folding.
The *right* thing is to actually fix bitcast, but that has other
complications. So, for now, just get rid of the broken workaround, and
check in a test-case showing that it doesn't crash, with TODOs for
emitting proper code.
llvm-svn: 249908
This wasn't very observable in execution tests, because usually there is
an invoke in the catchpad that unwinds the the catchendpad but never
actually throws.
llvm-svn: 249898
When running combine on an extract_vector_elt, it wants to look through
a bitcast to check if the argument to the bitcast was itself an
extract_vector_elt with particular operands.
However, it called getOperand() on the argument to the bitcast *before*
checking that the opcode was EXTRACT_VECTOR_ELT, assert-failing if there
were zero operands for the actual opcode.
Fix, and add trivial test.
llvm-svn: 249891
This patch corresponds to review:
http://reviews.llvm.org/D12032
This patch builds onto the patch that provided scalar to vector conversions
without stack operations (D11471).
Included in this patch:
- Vector element extraction for all vector types with constant element number
- Vector element extraction for v16i8 and v8i16 with variable element number
- Removal of some unnecessary COPY_TO_REGCLASS operations that ended up
unnecessarily moving things around between registers
Not included in this patch (will be in upcoming patch):
- Vector element extraction for v4i32, v4f32, v2i64 and v2f64 with
variable element number
- Vector element insertion for variable/constant element number
Testing is provided for all extractions. The extractions that are not
implemented yet are just placeholders.
llvm-svn: 249822
Accept r11 when targeting Windows on ARM rather than just low registers.
Because we are in a thumb-2 only mode, this may be slightly more expensive in
code size, but results in better code for the environment since it spills the
frame register, which is generally desired for fast stack walking as per the
ABI.
llvm-svn: 249804
Summary:
- Recurse from cleanupendpads to their cleanuppads, to make sure the
cleanuppad is visited if it has a cleanupendpad but no cleanupret.
- Check for and avoid double-processing cleanuppads, to allow for them to
have multiple cleanuprets (plus cleanupendpads).
- Update Cxx state numbering to visit toplevel cleanupendpads and to
recurse from cleanupendpads to their preds, to ensure we number any
funclets in inlined cleanups. SEH state numbering already did this.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13374
llvm-svn: 249792
its own variable.
This is needed so that we can explicitly turn off MMX without turning
off SSE and also so that we can diagnose feature set incompatibilities
that involve MMX without SSE.
Rationale:
// sse3
__m128d test_mm_addsub_pd(__m128d A, __m128d B) {
return _mm_addsub_pd(A, B);
}
// mmx
void shift(__m64 a, __m64 b, int c) {
_mm_slli_pi16(a, c);
_mm_slli_pi32(a, c);
_mm_slli_si64(a, c);
_mm_srli_pi16(a, c);
_mm_srli_pi32(a, c);
_mm_srli_si64(a, c);
_mm_srai_pi16(a, c);
_mm_srai_pi32(a, c);
}
clang -msse3 -mno-mmx file.c -c
For this code we should be able to explicitly turn off MMX
without affecting the compilation of the SSE3 function and then
diagnose and error on compiling the MMX function.
This matches the existing gcc behavior and follows the spirit of
the SSE/MMX separation in llvm where we can (and do) turn off
MMX code generation except in the presence of intrinsics.
Updated a couple of tests, but primarily tested with a couple of tests
for turning on only mmx and only sse.
This is paired with a patch to clang to take advantage of this behavior.
llvm-svn: 249731
o Before this patch, BPF backend will expand UNDEF node
to i64 constant 0.
o For second pass of dag combiner, legalizer will run through
each to-be-processed dag node.
o If any new SDNode is generated and has an undef operand,
dag combiner will put undef node, newly-generated constant-0 node,
and any node which uses these nodes in the working list.
o During this process, it is possible undef operand is
generated again, and this will form an infinite loop
for dag combiner pass2.
o This patch allows UNDEF to be a legal type.
Signed-off-by: Yonghong Song <yhs@plumgrid.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
llvm-svn: 249718
This fixes yet another scenario where tryBuildVectorShuffle would
attempt to create a BUILD_VECTOR node with an invalid combination
of types. This can happen if the incoming BUILD_VECTOR has elements
of a type different from the vector element type, which is allowed
in certain cases as long as they are all the same type.
When one of these elements is used in the residual vector, and
UNDEF elements are added to fill up the residual vector, those
UNDEFs then have to use the type of the original element, not
the vector element type, or else the resulting BUILD_VECTOR
will have an invalid type combination.
llvm-svn: 249706
We emit 1 compact unwind encoding per function, and this can’t represent
the varying stack pointer that will be generated by X86CallFrameOptimization.
Disable the optimization on Darwin.
(It might be possible to split the function into multiple ranges
and emit 1 compact unwind info per range. The compact unwind emission
code isn’t ready for that and this kind of info certainly isn’t
tested/used anywhere. It might be worth exploring this path if we want
to get the space savings at some point though)
llvm-svn: 249694
This instructions doesn't have intrincis.
Added tests for lowering and encoding.
Differential Revision: http://reviews.llvm.org/D12317
llvm-svn: 249688
This fixes two separate bugs:
1) The mask for the high lane was not set correctly. That fixes PR24532.
2) The transformation should bail out if it believes it involves more than
2 lanes, as it does not currently do anything sensible in this case.
Differential Revision: http://reviews.llvm.org/D13505
llvm-svn: 249669
Compare elimination extended to recognize load-and-test instructions used
for comparison and eliminate them the same way as with compare instructions.
Test case fp-cmp-05.ll updated to expect optimized results now also for z13.
The order of instruction shortening and compare elimination passes have been
changed so that opcodes do not have to be handled in both passes.
Reviewed by Ulrich Weigand.
llvm-svn: 249666
Since the LTxBRCompare instructions can't be used with vector registers, a
normal load-and-test instruction (with a modelled def operand) is used instead.
Reviewed by Ulrich Weigand.
llvm-svn: 249664
In particular, passing non-trivially copyable objects by value on win32
uses a dynamic alloca (inalloca). We would clobber ESP in the epilogue
and end up returning to outer space.
llvm-svn: 249637
The relocation for the filter funclet will be against a symbol table
entry for a function instead of the section, making it easier to
understand what is going on.
llvm-svn: 249621
The __CxxFrameHandler3 tables for 32-bit are supposed to hold stack
offsets relative to EBP, not ESP. I blindly updated the win-catchpad.ll
test case, and immediately noticed that 32-bit catching stopped working.
While I'm at it, move the frame index to frame offset WinEH table logic
out of PEI. PEI shouldn't have to know about WinEHFuncInfo. I realized
we can calculate frame index offsets just fine from the table printer.
llvm-svn: 249618
We remove unreachable blocks because it is pointless to consider them
for coloring. However, we still had stale pointers to these blocks in
some data structures after we removed them from the function.
Instead, remove the unreachable blocks before attempting to do anything
with the function.
This fixes PR25099.
llvm-svn: 249617
Summary:
This is necessary to keep the cloner from making bogus copies of debug
metadata attached to the IR it is cloning.
Also, avoid running RemapInstruction over all instructions in the common
case that no cloning was performed.
Reviewers: rnk, andrew.w.kaylor, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13514
llvm-svn: 249591
There was an off-by-one bug in ip2state tables which manifested when one
call immediately preceded the try-range of the next. The return address
of the previous call would appear to be within the try range of the next
scope, resulting in extra destructors or catches running.
We also computed the wrong offset for catch parameter stack objects. The
offset should be from RSP, not from RBP.
llvm-svn: 249578
I'll be using the function in a similar combine for AArch64. The helper was
also improved to handle undef values.
Part of http://reviews.llvm.org/D13442
llvm-svn: 249572
The ARM RTABI defines the half- to single-precision float conversion functions
with an __aeabi prefix, but libgcc only has them with a __gnu prefix. Therefore
we need to emit the __aeabi version when compiling with an eabi or eabihf
triple, and the __gnu version with a gnueabi or gnueabihf triple.
llvm-svn: 249565
Without an additional check for NEON, the compiler crashes during
legalization of NEON ldN/stN.
Differential Revision: http://reviews.llvm.org/D13508
llvm-svn: 249550
When outgoing function arguments are passed using push instructions, and EH
is enabled, we may need to indicate to the stack unwinder that the stack
pointer was adjusted before the call.
This should fix the exception handling issues in PR24792.
Differential Revision: http://reviews.llvm.org/D13132
llvm-svn: 249522
This stops using an unknown reg class operand.
Currently build_vector selection has a broken looking check
where it tries to use a VGPR reg class and an SGPR one if it
sees an SGPR use.
With the source operand has an explicit VGPR class,
illegal copies will be inserted that SIFixSGPRCopies will take care
of normally later, which will allow removing the weird check
of build_vector users. Without this, when removed v_movrels_b32 would
still be emitted even though all of the values were only stored in
SGPRs.
llvm-svn: 249494
Our current emission strategy is to emit the funclet prologue in the
CatchPad's normal destination. This is problematic because
intra-funclet control flow to the normal destination is not erroneous
and results in us reevaluating the prologue if said control flow is
taken.
Instead, use the CatchPad's location for the funclet prologue. This
correctly models our desire to have unwind edges evaluate the prologue
but edges to the normal destination result in typical control flow.
Differential Revision: http://reviews.llvm.org/D13424
llvm-svn: 249483
Summary:
We currently ignore the calling convention, so there is no real reason to
assert on the calling convention of functions.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13367
llvm-svn: 249468
Summary:
This fixes 7 tests during fast LLVM test-suite run:
* MultiSource/Benchmarks/McCat/18-imp/imp
* MultiSource/Applications/oggenc/oggenc
* MultiSource/Benchmarks/MallocBench/gs/gs
* MultiSource/Benchmarks/MiBench/automotive-susan/automotive-susan
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer
* MultiSource/Benchmarks/MiBench/consumer-lame/consumer-lame
* MultiSource/Benchmarks/Bullet/bullet
Error message was in the form of:
fatal error: error in backend: Cannot select: 0x95c3288: f32 = fsqrt 0x95c0190 [ORD=9] [ID=18]
0x95c0190: f32 = fadd 0x95bef30, 0x95c4d00 [ORD=8] [ID=17]
0x95bef30: f32 = fmul 0x95c4988, 0x95c4988 [ORD=5] [ID=16]
...
There was problem with selecting sqrt instruction in LLVM backend.
To fix the issue changes are made in TableGen definition for sqrt instruction in MipsInstrFPU.td and new test file sqrt.ll is added to LLVM regression tests.
Patch by Zlatko Buljan
Reviewers: zoran.jovanovic, hvarga, dsanders
Subscribers: llvm-commits, petarj
Differential Revision: http://reviews.llvm.org/D13235
llvm-svn: 249416
Jonas Paulsson