Summary:
This is an option primarily to use during testing. Instead of always
printing registers using their ABI names, this allows a user to request they
are printed with their architectural name.
This is then used in the register constraint tests to ensure the mapping
between architectural and abi names is correct.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: pzheng, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65950
llvm-svn: 371531
This is an alternative to D66980, which was reverted. Instead of
inserting a pseudo instruction that optionally expands to nothing, add a
pass that inserts int3 when appropriate after basic block layout.
Reviewers: hans
Differential Revision: https://reviews.llvm.org/D67201
llvm-svn: 371466
This is the first patch in a large sequence. The eventual goal is to have unordered atomic loads and stores - and possibly ordered atomics as well - handled through the normal ISEL codepaths for loads and stores. Today, there handled w/instances of AtomicSDNodes. The result of which is that all transforms need to be duplicated to work for unordered atomics. The benefit of the current design is that it's harder to introduce a silent miscompile by adding an transform which forgets about atomicity. See the thread on llvm-dev titled "FYI: proposed changes to atomic load/store in SelectionDAG" for further context.
Note that this patch is NFC unless the experimental flag is set.
The basic strategy I plan on taking is:
introduce infrastructure and a flag for testing (this patch)
Audit uses of isVolatile, and apply isAtomic conservatively*
piecemeal conservative* update generic code and x86 backedge code in individual reviews w/tests for cases which didn't check volatile, but can be found with inspection
flip the flag at the end (with minimal diffs)
Work through todo list identified in (2) and (3) exposing performance ops
(*) The "conservative" bit here is aimed at minimizing the number of diffs involved in (4). Ideally, there'd be none. In practice, getting it down to something reviewable by a human is the actual goal. Note that there are (currently) no paths which produce LoadSDNode or StoreSDNode with atomic MMOs, so we don't need to worry about preserving any behaviour there.
We've taken a very similar strategy twice before with success - once at IR level, and once at the MI level (post ISEL).
Differential Revision: https://reviews.llvm.org/D66309
llvm-svn: 371441
Handle it the same way as G_BUILD_VECTOR_TRUNC. Arguably only
G_BUILD_VECTOR_TRUNC should be legal for this, but G_BUILD_VECTOR will
probably be more convenient in most cases.
llvm-svn: 371440
This enables GlobalISel to handle various intrinsics. The custom node
pattern will be ignored, and the intrinsic will work. This will also
allow SelectionDAG to directly select the intrinsics, but as they are
all custom lowered to the nodes, this ends up leaving dead code in the
table.
Eventually either GlobalISel should add the equivalent of custom nodes
equivalent, or intrinsics should be directly used. These each have
different tradeoffs.
There are a few more to handle, but these are easy to handle
ones. Some others fail for other reasons.
llvm-svn: 371432
Current for SAE instructions we only allow _MM_FROUND_CUR_DIRECTION(bit 2) or _MM_FROUND_NO_EXC(bit 3) to be used as the immediate passed to the inrinsics. But these instructions don't perform rounding so _MM_FROUND_CUR_DIRECTION is just sort of a default placeholder when you don't want to suppress exceptions. Using _MM_FROUND_NO_EXC by itself is really bit equivalent to (_MM_FROUND_NO_EXC | _MM_FROUND_TO_NEAREST_INT) since _MM_FROUND_TO_NEAREST_INT is 0. Since we aren't rounding on these instructions we should also accept (_MM_FROUND_CUR_DIRECTION | _MM_FROUND_NO_EXC) as equivalent to (_MM_FROUND_NO_EXC). icc allows this, but gcc does not.
Differential Revision: https://reviews.llvm.org/D67289
llvm-svn: 371430
microMIPS jump and link exchange instruction stores a target in a
26-bits field. Despite other microMIPS JAL instructions these bits
are target address shifted right 2 bits [1]. The patch fixes the
JALX instruction decoding and uses 2-bit shift.
[1] MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set
Differential Revision: https://reviews.llvm.org/D67320
llvm-svn: 371428
Unfortunately MnemonicAlias defines a "Predicates" field just like an
instruction or pattern, with a somewhat different interpretation.
This ends up overriding the intended Predicates set by
PredicateControl on the pseudoinstruction defintions with an empty
list. This allowed incorrectly selecting instructions that should have
been rejected due to the SubtargetPredicate from patterns on the
instruction definition.
This does remove the divergent predicate from the 64-bit shift
patterns, which were already not used for the 32-bit shift, so I'm not
sure what the point was. This also removes a second, redundant copy of
the 64-bit divergent patterns.
llvm-svn: 371427
Just return once you emit the call, which is exactly what SelectionDAG does in
this situation.
Update call-translator-tail-call.ll.
Also update dllimport.ll to show that we tail call here in GISel again. Add
-verify-machineinstrs to the GISel line too, to defend against verifier
failures.
Differential revision: https://reviews.llvm.org/D67282
llvm-svn: 371425
Treat this as legal on gfx9 since it can use S_PACK_* instructions for
this.
This isn't used by anything yet. The same will probably apply to
16-bit G_BUILD_VECTOR without the trunc.
llvm-svn: 371423
These predicate vectors can usually be loaded and stored with a single
instruction, a VSTR_P0. However this instruction will store the entire P0
predicate, 16 bits, zeroextended to 32bits. Each lane of the the
v4i1/v8i1/v16i1 representing 4/2/1 bits.
As far as I understand, when llvm says "store this v4i1", it really does need
to store 4 bits (or 8, that being the size of a byte, with this bottom 4 as the
interesting bits). For example a bitcast from a v8i1 to a i8 is defined as a
store followed by a load, which is how the code is expanded.
So this instead lowers the v4i1/v8i1 load/store through some shuffles to get
the bits into the correct positions. This, as you might imagine, is not as
efficient as a single instruction. But I believe it is needed for correctness.
v16i1 equally should not load/store 32bits, only storing the 16bits of data.
Stack loads/stores are still using the VSTR_P0 (as can be seen by the test not
changing). This is fine as they are self-consistent, it is only "externally
observable loads/stores" (from our point of view) that need to be corrected.
Differential revision: https://reviews.llvm.org/D67085
llvm-svn: 371419
The family of 'dual-accumulating' vector multiply-add instructions
(VMLADAV, VMLALDAV and VRMLALDAVH) can all operate on both signed and
unsigned integer types, and they all have an 'exchange' variant (with
an X in the name) that modifies which pairs of vector lanes in the two
inputs are multiplied together. But there's a clause in the spec that
says that the X variants //don't// operate on unsigned integer types,
only signed. You can have X, or unsigned, or neither, but not both.
We didn't notice that clause when we implemented the MC support for
these instructions, so LLVM believes that things like VMLADAVX.U8 do
exist, contradicting the spec. Here I fix that by conditioning them
out in Tablegen.
In order to do that, I've reversed the nesting order of the Tablegen
multiclasses for those instructions. Previously, the innermost
multiclass generated the X and not-X variants, and the one outside
that generated the A and not-A variants. Now X is done by the outer
multiclass, which allows me to bypass that one when I only want the
two not-X variants.
Changing the multiclass nesting order also changes the names of the
instruction ids unless I make a special effort not to. I decided that
while I was changing them anyway I'd make them look nicer; so now the
instructions have names like MVE_VMLADAVs32 or MVE_VMLADAVaxs32,
instead of cumbersome _noacc_noexch suffixes.
The corresponding multiply-subtract instructions are unaffected. Those
don't accept unsigned types at all, either in the spec or in LLVM.
Reviewers: ostannard, dmgreen
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67214
llvm-svn: 371405
Reapply with fix to reduce resources required by the compiler - use
unsigned[2] instead of std::pair. This causes clang and gcc to compile
the generated file multiple times faster, and hopefully will reduce
the resource requirements on Visual Studio also. This fix is a little
ugly but it's clearly the same issue the previous author of
DFAPacketizer faced (the previous tables use unsigned[2] rather uglily
too).
This patch allows the DFAPacketizer to be queried after a packet is formed to work out which
resources were allocated to the packetized instructions.
This is particularly important for targets that do their own bundle packing - it's not
sufficient to know simply that instructions can share a packet; which slots are used is
also required for encoding.
This extends the emitter to emit a side-table containing resource usage diffs for each
state transition. The packetizer maintains a set of all possible resource states in its
current state. After packetization is complete, all remaining resource states are
possible packetization strategies.
The sidetable is only ~500K for Hexagon, but the extra tracking is disabled by default
(most uses of the packetizer like MachinePipeliner don't care and don't need the extra
maintained state).
Differential Revision: https://reviews.llvm.org/D66936
llvm-svn: 371399
This patch allows the DFAPacketizer to be queried after a packet is formed to work out which
resources were allocated to the packetized instructions.
This is particularly important for targets that do their own bundle packing - it's not
sufficient to know simply that instructions can share a packet; which slots are used is
also required for encoding.
This extends the emitter to emit a side-table containing resource usage diffs for each
state transition. The packetizer maintains a set of all possible resource states in its
current state. After packetization is complete, all remaining resource states are
possible packetization strategies.
The sidetable is only ~500K for Hexagon, but the extra tracking is disabled by default
(most uses of the packetizer like MachinePipeliner don't care and don't need the extra
maintained state).
Differential Revision: https://reviews.llvm.org/D66936
........
Reverted as this is causing "compiler out of heap space" errors on MSVC 2017/19 NDEBUG builds
llvm-svn: 371393
Summary:
This patch implements two arithmetic intrinsics:
* int_aarch64_sve_abs
* int_aarch64_sve_neg
testing the support for scalable vector types in intrinsics added in D65930.
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D65931
llvm-svn: 371388
We should not be generating Neon stack loads/stores even for these large
registers.
No test here because my understanding is we will only generate these QQPR regs
for intrinsics and VLDn's. The tests will follow once those are available.
Differential revision: https://reviews.llvm.org/D67169
llvm-svn: 371386
Loosely based on DAGCombiner version, but this part is slightly simpler in
GlobalIsel because all address calculation is performed by G_GEP. That makes
the inc/dec distinction moot so there's just pre/post to think about.
No targets can handle it yet so testing is via a special flag that overrides
target hooks.
llvm-svn: 371384
Specify the Unpredictable bits, and return softfails when appropriate.
Patch by Mark Murray!
Differential revision: https://reviews.llvm.org/D66939
llvm-svn: 371374
The incoming accumulator value can be discovered through a sext, in
which case there will be a mismatch between the input and the result.
So sign extend the accumulator input if we're performing a 64-bit mac.
Differential Revision: https://reviews.llvm.org/D67220
llvm-svn: 371370
This patch decodes target and faux shuffles with getTargetShuffleInputs - a reduced version of resolveTargetShuffleInputs that doesn't resolve SM_SentinelZero cases, so we can correctly remove zero vectors if they aren't demanded.
llvm-svn: 371353
If the two zero vectors have undefs in different places they
won't get combined by simplifySelect.
This fixes a regression from an earlier commit.
llvm-svn: 371351
The change to avx512-vec-cmp.ll is a regression, but should be
easy to fix. It occurs because the getZeroVector call was
canonicalizing both sides to the same node, then SimplifySelect
was able to simplify it. But since only called getZeroVector
on some VTs this isn't a robust way to combine this.
The change to vector-shuffle-combining-ssse3.ll is more
instructions, but removes a constant pool load so its unclear
if its a regression or not.
llvm-svn: 371350
As reported in post-commit review of r370327,
there is some case where the code crashes.
As discussed with Craig Topper, the problem is that getConstant()
internally calls getSplatBuildVector(), so we don't insert
the constant itself.
If we do that manually we're good.
llvm-svn: 371346
Summary:
Add zero-materializing XORs to X86's describeLoadedValue() hook in order
to produce call site values.
I have had to change the defs logic in collectCallSiteParameters() a bit
to be able to describe the XORs. The XORs implicitly define $eflags,
which would cause them to never be considered, due to a guard condition
that I->getNumDefs() is one. I have changed that condition so that we
now only consider instructions where a forwarded register overlaps with
the instruction's single explicit define. We still need to collect the implicit
defines of other forwarded registers to remove them from the work list.
I'm not sure how to move towards supporting instructions with multiple
explicit defines, cases where forwarded register are implicitly defined,
and/or cases where an instruction produces values for multiple forwarded
registers. Perhaps the describeLoadedValue() hook should take a register
argument, and we then leave it up to the hook to describe the loaded
value in that register? I have not yet encountered a situation where
that would be necessary though.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: vsk
Subscribers: ychen, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67225
llvm-svn: 371333
Summary:
This changes the ParamLoadedValue pair which the describeLoadedValue()
hook returns so that MachineOperand objects are returned instead of
pointers.
When describing call site values we may need to describe operands which
are not part of the instruction. One such example is zero-materializing
XORs on x86, which I have implemented support for in a child revision.
Instead of having to return a pointer to an operand stored somewhere
outside the instruction, start returning objects directly instead, as
that simplifies the code.
The MachineOperand class only holds POD members, and on x86-64 it is 32
bytes large. That combined with copy elision means that the overhead of
returning a machine operand object from the hook does not become very
large.
I benchmarked this on a 8-thread i7-8650U machine with 32 GB RAM. The
benchmark consisted of building a clang 8.0 binary configured with:
-DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DLLVM_TARGETS_TO_BUILD=X86 \
-DLLVM_USE_SANITIZER=Address \
-DCMAKE_CXX_FLAGS="-Xclang -femit-debug-entry-values -stdlib=libc++"
The average wall clock time increased by 4 seconds, from 62:05 to
62:09, which is an 0.1% increase.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: vsk
Subscribers: hiraditya, ychen, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67261
llvm-svn: 371332
This generalizes the existing <32 x i1> pre-AVX2 split code to support reductions from <64 x i1> as well, we can probably generalize to any larger pow2 case in the future if the (unlikely) need ever arises.
We still need to tweak combineBitcastvxi1 to improve AVX512F codegen as its assumes vXi1 types should be handled on the mask registers even when they aren't legal.
Differential Revision: https://reviews.llvm.org/D67070
llvm-svn: 371328
isel used to require zero vectors to be canonicalized to a single
type to minimize the number of patterns needed to match. This is
no longer required.
I plan to do this to integers too, but floating point was simpler
to start with. Integer has a complication where v32i16/v64i8 aren't
legal when the other 512-bit integer types are.
llvm-svn: 371325
This patch enables generation of fused multiply add/sub for instructions operating on fp16.
Tested on aarch64-linux.
Differential Revision: https://reviews.llvm.org/D67297
llvm-svn: 371321
Summary:
Similar to the previous prefer-256-bit flag. We might want to
enable this by default some CPUs. This just starts the initial
work to implement and prove that it effects TTI's vector width.
Reviewers: RKSimon, echristo, spatel, atdt
Reviewed By: RKSimon
Subscribers: lebedev.ri, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67311
llvm-svn: 371319
Use getAPIntValue() directly - this is mainly a best practice style issue to help prevent fuzz tests blowing up when a i12345 (or whatever) is generated.
Use getConstantOperandVal/getConstantOperandAPInt wrappers where possible.
llvm-svn: 371315
Fix for https://bugs.llvm.org/show_bug.cgi?id=43230.
When creating PSHUFLW from a repeated shuffle mask, we have to apply
the checks to the repeated mask, not the original one. For the test
case from PR43230 the inspected part of the original mask is all undef.
Differential Revision: https://reviews.llvm.org/D67314
llvm-svn: 371307
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Despite the fact that the localizer's original motivation was to fix horrendous
constant spilling at -O0, shortening live ranges still has net benefits even
with optimizations enabled.
On an -Os build of CTMark, doing this improves code size by 0.5% geomean.
There are a few regressions, bullet increasing in size by 0.5%. One example from
bullet where code size increased slightly was due to GlobalISel actually now
generating the same code as SelectionDAG. So we actually have an opportunity
in future to implement better heuristics for localization and therefore be
*better* than SDAG in some cases. In relation to other optimizations though that
one is relatively minor.
Differential Revision: https://reviews.llvm.org/D67303
llvm-svn: 371266
We can use a MOVSX16 here then rely on FixupBWInst to change to
MOVSX32 if the upper bits are dead. With a special case to
not promote if it could be turned into CBW.
Then we can rely on X86MCInstLower to turn the MOVSX into CBW
very late if register allocation worked out.
Using MOVSX gives an opportunity to use the MOVSX as a both a
copy and a sign extend since the input and output register aren't
tied together.
Differential Revision: https://reviews.llvm.org/D67192
llvm-svn: 371243
We can rely on X86FixupBWInsts to turn these into MOVZX32. This
simplifies a follow up commit to use MOVSX for i8 sdivrem with
a late optimization to use CBW when register allocation works out.
llvm-svn: 371242
-tailcallopt requires that we perform different stack adjustments than with
sibling calls. For example, the `@caller_to0_from8` function in
test/CodeGen/AArch64/tail-call.ll requires that we adjust SP. Without
-tailcallopt, this adjustment does not happen. With it, however, it is expected.
So, to ensure that adding sibling call support doesn't break -tailcallopt,
make CallLowering always fall back on possible tail calls when -tailcallopt
is passed in.
Update test/CodeGen/AArch64/tail-call.ll with a GlobalISel line to make sure
that we don't differ from the SDAG implementation at any point.
Differential Revision: https://reviews.llvm.org/D67245
llvm-svn: 371227
This patch sinks add/mul(shufflevector(insertelement())) into the basic block in which they are used so that they can then be selected together.
This is useful for various MVE instructions, such as vmla and others that take R registers.
Loop tests have been added to the vmla test file to make sure vmlas are generated in loops.
Differential revision: https://reviews.llvm.org/D66295
llvm-svn: 371218
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: nemanjai, javed.absar, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, s.egerton, pzheng, ychen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67267
llvm-svn: 371212
Summary:
This was discovered while introducing the llvm::Align type.
The original setMinFunctionAlignment used to take alignment as log2, looking at the comment it seems like instructions are to be 2-bytes aligned and not 4-bytes aligned.
Reviewers: uweigand
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67271
llvm-svn: 371204
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67229
llvm-svn: 371200
This patch allows the DFAPacketizer to be queried after a packet is formed to work out which
resources were allocated to the packetized instructions.
This is particularly important for targets that do their own bundle packing - it's not
sufficient to know simply that instructions can share a packet; which slots are used is
also required for encoding.
This extends the emitter to emit a side-table containing resource usage diffs for each
state transition. The packetizer maintains a set of all possible resource states in its
current state. After packetization is complete, all remaining resource states are
possible packetization strategies.
The sidetable is only ~500K for Hexagon, but the extra tracking is disabled by default
(most uses of the packetizer like MachinePipeliner don't care and don't need the extra
maintained state).
Differential Revision: https://reviews.llvm.org/D66936
llvm-svn: 371198
Summary:
This fixes poor scheduling in a function containing a barrier and a few
load instructions.
Without this fix, ScheduleDAGInstrs::buildSchedGraph adds an artificial
edge in the dependency graph from the barrier instruction to the exit
node representing live-out latency, with a latency of about 500 cycles.
Because of this it thinks the critical path through the graph also has
a latency of about 500 cycles. And because of that it does not think
that any of the load instructions are on the critical path, so it
schedules them with no regard for their (80 cycle) latency, which gives
poor results.
Reviewers: arsenm, dstuttard, tpr, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67218
llvm-svn: 371192
The MVE and LOB extensions of Armv8.1m can be combined to enable
'tail predication' which removes the need for a scalar remainder
loop after vectorization. Lane predication is performed implicitly
via a system register. The effects of predication is described in
Section B5.6.3 of the Armv8.1-m Arch Reference Manual, the key points
being:
- For vector operations that perform reduction across the vector and
produce a scalar result, whether the value is accumulated or not.
- For non-load instructions, the predicate flags determine if the
destination register byte is updated with the new value or if the
previous value is preserved.
- For vector store instructions, whether the store occurs or not.
- For vector load instructions, whether the value that is loaded or
whether zeros are written to that element of the destination
register.
This patch implements a pass that takes a hardware loop, containing
masked vector instructions, and converts it something that resembles
an MVE tail predicated loop. Currently, if we had code generation,
we'd generate a loop in which the VCTP would generate the predicate
and VPST would then setup the value of VPR.PO. The loads and stores
would be placed in VPT blocks so this is not tail predication, but
normal VPT predication with the predicate based upon a element
counting induction variable. Further work needs to be done to finally
produce a true tail predicated loop.
Because only the loads and stores are predicated, in both the LLVM IR
and MIR level, we will restrict support to only lane-wise operations
(no horizontal reductions). We will perform a final check on MIR
during loop finalisation too.
Another restriction, specific to MVE, is that all the vector
instructions need operate on the same number of elements. This is
because predication is performed at the byte level and this is set
on entry to the loop, or by the VCTP instead.
Differential Revision: https://reviews.llvm.org/D65884
llvm-svn: 371179
The same stack is loaded for each workitem ID, and each use. Nothing
prevents you from creating multiple fixed stack objects with the same
offsets, so this was creating a load for each unique frame index,
despite them being the same offset. Re-use the same frame index so the
loads are CSEable.
llvm-svn: 371148
Approximately 30% of the time was spent in the std::vector
constructor. In one testcase this pushes the scheduler to being the
second slowest pass.
I'm not sure I understand why these vector are necessary. The default
scheduler initCandidate seems to use some pre-existing vectors for the
pressure.
llvm-svn: 371136
Recommit basic sibling call lowering (https://reviews.llvm.org/D67189)
The issue was that if you have a return type other than void, call lowering
will emit COPYs to get the return value after the call.
Disallow sibling calls other than ones that return void for now. Also
proactively disable swifterror tail calls for now, since there's a similar issue
with COPYs there.
Update call-translator-tail-call.ll to include test cases for each of these
things.
llvm-svn: 371114
As noted in PR43197, we can use test+add+cmov+sra to implement
signed division by a power of 2.
This is based off the similar version in AArch64, but I've
adjusted it to use target independent nodes where AArch64 uses
target specific CMP and CSEL nodes. I've also blocked INT_MIN
as the transform isn't valid for that.
I've limited this to i32 and i64 on 64-bit targets for now and only
when CMOV is supported. i8 and i16 need further investigation to be
sure they get promoted to i32 well.
I adjusted a few tests to enable cmov to demonstrate the new
codegen. I also changed twoaddr-coalesce-3.ll to 32-bit mode
without cmov to avoid perturbing the scenario that is being
set up there.
Differential Revision: https://reviews.llvm.org/D67087
llvm-svn: 371104
A number of inline assembly constraints are currently supported by LLVM, but rejected as invalid by Clang:
Target independent constraints:
s: An integer constant, but allowing only relocatable values
ARM specific constraints:
j: An immediate integer between 0 and 65535 (valid for MOVW)
x: A 32, 64, or 128-bit floating-point/SIMD register: s0-s15, d0-d7, or q0-q3
N: An immediate integer between 0 and 31 (Thumb1 only)
O: An immediate integer which is a multiple of 4 between -508 and 508. (Thumb1 only)
This patch adds support to Clang for the missing constraints along with some checks to ensure that the constraints are used with the correct target and Thumb mode, and that immediates are within valid ranges (at least where possible). The constraints are already implemented in LLVM, but just a couple of minor corrections to checks (V8M Baseline includes MOVW so should work with 'j', 'N' and 'O' shouldn't be valid in Thumb2) so that Clang and LLVM are in line with each other and the documentation.
Differential Revision: https://reviews.llvm.org/D65863
Change-Id: I18076619e319bac35fbb60f590c069145c9d9a0a
llvm-svn: 371079
As discussed on D64551 and PR43227, we don't correctly handle cases where the base load has a non-zero byte offset.
Until we can properly handle this, we must bail from EltsFromConsecutiveLoads.
llvm-svn: 371078
This attempts to just fix the creation of VPT blocks, fixing up the iterating,
which instructions are considered in the bundle, and making sure that we do not
overrun the end of the block.
Differential Revision: https://reviews.llvm.org/D67219
llvm-svn: 371064
G_FENCE comes form fence instruction. For MIPS fence is generated in
AtomicExpandPass when atomic instruction gets surrounded with fence
instruction when needed.
G_FENCE arguments don't have LLT, because of that there is no job for
legalizer and regbankselect. Instruction select G_FENCE for MIPS32.
Differential Revision: https://reviews.llvm.org/D67181
llvm-svn: 371056
Select G_INTRINSIC_W_SIDE_EFFECTS for Intrinsic::trap for MIPS32
via legalizeIntrinsic.
Differential Revision: https://reviews.llvm.org/D67180
llvm-svn: 371055
Instead of returning structure by value clang usually adds pointer
to that structure as an argument. Pointers don't require special
handling no matter the SRet flag. Remove unsuccessful exit from
lowerCall for arguments with SRet flag if they are pointers.
Differential Revision: https://reviews.llvm.org/D67179
llvm-svn: 371054
This adds support for basic sibling call lowering in AArch64. The intent here is
to only handle tail calls which do not change the ABI (hence, sibling calls.)
At this point, it is very restricted. It does not handle
- Vararg calls.
- Calls with outgoing arguments.
- Calls whose calling conventions differ from the caller's calling convention.
- Tail/sibling calls with BTI enabled.
This patch adds
- `AArch64CallLowering::isEligibleForTailCallOptimization`, which is equivalent
to the same function in AArch64ISelLowering.cpp (albeit with the restrictions
above.)
- `mayTailCallThisCC` and `canGuaranteeTCO`, which are identical to those in
AArch64ISelLowering.cpp.
- `getCallOpcode`, which is exactly what it sounds like.
Tail/sibling calls are lowered by checking if they pass target-independent tail
call positioning checks, and checking if they satisfy
`isEligibleForTailCallOptimization`. If they do, then a tail call instruction is
emitted instead of a normal call. If we have a sibling call (which is always the
case in this patch), then we do not emit any stack adjustment operations. When
we go to lower a return, we check if we've already emitted a tail call. If so,
then we skip the return lowering.
For testing, this patch
- Adds call-translator-tail-call.ll to test which tail calls we currently lower,
which ones we don't, and which ones we shouldn't.
- Updates branch-target-enforcement-indirect-calls.ll to show that we fall back
as expected.
Differential Revision: https://reviews.llvm.org/D67189
........
This fails on EXPENSIVE_CHECKS builds due to a -verify-machineinstrs test failure in CodeGen/AArch64/dllimport.ll
llvm-svn: 371051
Handle the remaining cases also by handling asm goto in
SystemZInstrInfo::getBranchInfo().
Review: Ulrich Weigand
https://reviews.llvm.org/D67151
llvm-svn: 371048
Fixes clang static-analyzer warning.
Technically the MachineInstr *Sub might still be null if we're comparing zero (IsCmpZero == true), although this probably won't happen as SrcReg2 is probably == 0.
llvm-svn: 371047
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:
- `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
- `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
- `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,
Reviewers: lattner, thegameg, courbet
Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65945
llvm-svn: 371045
This adds support for basic sibling call lowering in AArch64. The intent here is
to only handle tail calls which do not change the ABI (hence, sibling calls.)
At this point, it is very restricted. It does not handle
- Vararg calls.
- Calls with outgoing arguments.
- Calls whose calling conventions differ from the caller's calling convention.
- Tail/sibling calls with BTI enabled.
This patch adds
- `AArch64CallLowering::isEligibleForTailCallOptimization`, which is equivalent
to the same function in AArch64ISelLowering.cpp (albeit with the restrictions
above.)
- `mayTailCallThisCC` and `canGuaranteeTCO`, which are identical to those in
AArch64ISelLowering.cpp.
- `getCallOpcode`, which is exactly what it sounds like.
Tail/sibling calls are lowered by checking if they pass target-independent tail
call positioning checks, and checking if they satisfy
`isEligibleForTailCallOptimization`. If they do, then a tail call instruction is
emitted instead of a normal call. If we have a sibling call (which is always the
case in this patch), then we do not emit any stack adjustment operations. When
we go to lower a return, we check if we've already emitted a tail call. If so,
then we skip the return lowering.
For testing, this patch
- Adds call-translator-tail-call.ll to test which tail calls we currently lower,
which ones we don't, and which ones we shouldn't.
- Updates branch-target-enforcement-indirect-calls.ll to show that we fall back
as expected.
Differential Revision: https://reviews.llvm.org/D67189
llvm-svn: 370996
Since an add instruction must produce an unused carry out, this
requires additional SGPRs. This can be avoided by keeping the entire
offset computation in SGPRs. If one SGPR is still available, this only
costs one extra mov. If none are available, the entire computation can
be done in place and reversed.
This does assume the use is a VGPR operand. This was already assumed,
and we currently only select frame indexes to VALU instructions. This
should probably be fixed at some point to handle more possible MIR.
llvm-svn: 370929
For any unpaired muls, we accumulate them as an input to the
reduction. Check the type of the mul and perform a sext if the
existing accumlator input type is not the same.
Differential Revision: https://reviews.llvm.org/D66993
llvm-svn: 370851
This reverts r370525 (git commit 0bb1630685)
Also reverts r370543 (git commit 185ddc08ee)
The approach I took only works for functions marked `noreturn`. In
general, a call that is not known to be noreturn may be followed by
unreachable for other reasons. For example, there could be multiple call
sites to a function that throws sometimes, and at some call sites, it is
known to always throw, so it is followed by unreachable. We need to
insert an `int3` in these cases to pacify the Windows unwinder.
I think this probably deserves its own standalone, Win64-only fixup pass
that runs after block placement. Implementing that will take some time,
so let's revert to TrapUnreachable in the mean time.
llvm-svn: 370829
Summary:
This removes all string constants for function names and compares
functions by string directly when needed. Many of these constants are
used only once or twice so the benefit of defining them separately is
not very clear, and this actually fixes a bug.
When we already have a `malloc` declaration which is an alias to
something else within the module,
```
@malloc = weak hidden alias i8* (i32), i8* (i32)* @dlmalloc
```
(this happens compiling with emscripten with `-s WASM_OBJECT_FILES=0`
because all bc files are merged before being fed into `wasm-ld` which
runs the backend optimizations as LTO)
`Module::getFunction("malloc")` in `canLongjmp` returns `nullptr`
because `Module::getFunction` dyncasts pointer into `Function`, but the
alias is a `GlobalValue` but not a `Function`. This makes `canLongjmp`
return false for `malloc` in this case, and we end up adding a lot of
longjmp handling code around malloc. This is not only a code size
increase but actually a bug because `malloc` is used in the entry block
when preparing for setjmp tables for emscripten sjlj handling, and this
makes initial setjmp preparation, which has to happen in the entry
block, move to another split block, and this interferes with SSA update
later.
This also adds two more functions, `getTempRet0` and `setTempRet0`, in
the list of not longjmp-able functions.
Fixes https://github.com/emscripten-core/emscripten/issues/8935.
Reviewers: sbc100
Subscribers: mehdi_amini, jgravelle-google, hiraditya, sunfish, dexonsmith, dschuff, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67129
llvm-svn: 370828
Now that we have the infrastructure to support s128 types as parameters
we can expand these to libcalls.
Differential Revision: https://reviews.llvm.org/D66185
llvm-svn: 370823
On AArch64, s128 types have to be split into s64 GPRs when passed as arguments.
This change adds the generic support in call lowering for dealing with multiple
registers, for incoming and outgoing args.
Support for splitting for return types not yet implemented.
Differential Revision: https://reviews.llvm.org/D66180
llvm-svn: 370822
These flags should simply be passed through to the target, which will do
the right thing. Add an MC/X86 test that uses these directives with the
three primary object file formats and shows that they disassemble the
same everywhere.
There is a missing test for .code32 on Windows ARM, since I'm not sure
exactly how to construct one.
Fixes PR43203
llvm-svn: 370805
This pattern, when imported at -O0 adds an extra copy via the SUBREG_TO_REG.
This is because the SUBREG_TO_REG is not eliminated. At all other opt levels,
it is eliminated.
This is a 1% geomean code size savings at -O0 on CTMark.
Differential Revision: https://reviews.llvm.org/D67027
llvm-svn: 370789
The code here seems to date back to r134705, when tablegen lowering was first
being added. I don't believe that we need to include CPSR implicit operands on
the MCInst. This now works more like other backends (like AArch64), where all
implicit registers are skipped.
This allows the AliasInst for CSEL's to match correctly, as can be seen in the
test changes.
Differential revision: https://reviews.llvm.org/D66703
llvm-svn: 370745
This moves ConstantMaterializationCost into ARMBaseInstrInfo so that it can
also be used in ISel Lowering, adding codesize values to the computed costs, to
be able to compare either approximate instruction counts or codesize costs.
It also adds a HasLowerConstantMaterializationCost, which compares the
ConstantMaterializationCost of two values, returning true if the first is
smaller either in instruction count/codesize, or falling back to the other in
the case that they are equal.
This is used in constant CSEL lowering to invert the predicate if the opposite
is easier to materialise.
Differential revision: https://reviews.llvm.org/D66701
llvm-svn: 370741
Arm 8.1-M adds a number of related CSEL instructions, including CSINC, CSNEG and CSINV. These choose between two values given the content in CPSR and a condition, performing an increment, negation or inverse of the false value.
This adds some selection for them, either from constant values or patterns. It does not include CSEL directly, which is currently not always making code better. It is still useful, but we will have to check more carefully where it should and shouldn't be used.
Code by Ranjeet Singh and Simon Tatham, with some modifications from me.
Differential revision: https://reviews.llvm.org/D66483
llvm-svn: 370739
Now the last `.section` directive in the MIPS asm file preamble
is the `.section .mdebug.abi`. If assembler code injected for example
by the LLVM `module asm` or the C ` __asm` directives do not contain
explicit switching to the `.text` section it goes to the `.mdebug.abi`
section. It might be unexpected to the user and in fact for example
breaks building some existing code like FreeBSD libc [1].
The patch forces switching to the `.text` section after emitting MIPS
assembler file preamble.
[1] https://bugs.llvm.org/show_bug.cgi?id=43119
Fix PR43119.
Differential Revision: https://reviews.llvm.org/D67014
llvm-svn: 370735
We were using isShiftedInt<7, Shift>(RHSC) to detect the ranges of offsets to
fold into MVE loads/stores. The instructions actually take a 7 bit unsigned
integer which is either added or subtracted. So something more like
isShiftedUInt<7, Shift>(abs(RHSC)).
Instead I've changes this to use the isScaledConstantInRange method, same as in
SelectT2AddrModeImm7Offset used by pre/post inc, which seemed to already be
getting this correct.
Differential revision: https://reviews.llvm.org/D66997
llvm-svn: 370731
Decoding of VMSR doesn't diagnose some unpredictable encodings, as the unpredictable bits are not correctly set.
Diff-reduce this instruction's internals WRT VMRS so I can see the differences better. Mostly this is s/src/Rt/g.
Fill in the "should-be-(0)" bits.
Designate the Unpredictable{} bits for both VMRS and VMSR.
Patch by Mark Murray!
Differential revision: https://reviews.llvm.org/D66938
llvm-svn: 370729
To save a 'add sp,#val' instruction by adding registers to the final pop instruction,
the first register transferred by this pop instruction need to be found.
If the function to be optimized has a non-void return value, the operand list contains
r0 (implicit) which prevents the optimization to take place.
Therefore implicit register references should be skipped in the search loop,
because this registers are never popped from the stack.
Patch by Rainer Herbertz (rOptimizer)!
Differential revision: https://reviews.llvm.org/D66730
llvm-svn: 370728
This merges the 32-bit and 64-bit mode code to just use Custom
for both i32 and i64. We already had most of the handling in
the custom handling due to the AVX512 having legal fp_to_uint.
Just needed to add the i32->i64 promotion handling. Refactor
the fp_to_uint code in the custom handler to simplify the
number of times we check things.
Tweak cost model tables to match the default handling we were
getting due to Expand before.
llvm-svn: 370700
Use Custom lowering instead. Fall back to default expansion only
when the scalar FP type belongs in an XMM register. This improves
lowering for i32 to fp80, and also i32 to double on SSE1 only.
llvm-svn: 370699
FP128 values are passed in xmm registers so should be asssociated
with an SSE feature rather than MMX which uses a different set
of registers.
llc enables sse1 and sse2 by default with x86_64. But does not
enable mmx. Clang enables all 3 features by default.
I've tried to add command lines to test with -sse
where possible, but any test that returns a value in an xmm
register fails with a fatal error with -sse since we have no
defined ABI for that scenario.
llvm-svn: 370682
We should be using MQPR, and if we don't we can get COPYs and PHIs created for
QPR. These get folded into instructions, failing verification checks.
Differential revision: https://reviews.llvm.org/D66214
llvm-svn: 370676
Now that constrained fpto[su]i intrinsic are available,
add codegen support to the SystemZ backend.
In addition to pure back-end changes, I've also needed
to add the strict_fp_to_[su]int and any_fp_to_[su]int
pattern fragments in the obvious way.
llvm-svn: 370674
Summary:
Adds the following inline asm constraints for SVE:
- w: SVE vector register with full range, Z0 to Z31
- x: Restricted to registers Z0 to Z15 inclusive.
- y: Restricted to registers Z0 to Z7 inclusive.
This change also adds the "z" modifier to interpret a register as an SVE register.
Not all of the bitconvert patterns added by this patch are used, but they have been included here for completeness.
Reviewers: t.p.northover, sdesmalen, rovka, momchil.velikov, rengolin, cameron.mcinally, greened
Reviewed By: sdesmalen
Subscribers: javed.absar, tschuett, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66302
llvm-svn: 370673
Sam Elliott