This prevents scalarization of fixed vector operations or crashes
on scalable vectors.
We don't have direct support for these operations. To emulate
ftrunc we can convert to the same sized integer and back to fp using
round to zero. We don't need to do a convert if the value is large
enough to have no fractional bits or is a nan.
The ceil and floor lowering would be better if we changed FRM, but
we don't model FRM correctly yet. So I've used the trunc lowering
with a conditional add or subtract with 1.0 if the truncate rounded
in the wrong direction.
There are also missed opportunities to use masked instructions.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D113543
This adds a fold in DAGCombine to create fptosi_sat from sequences for
smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
to be handled similarly.
A shouldConvertFpToSat method was added to control when converting may
be profitable. The original fptosi will have a less strict semantics
than the fptosisat, with less values that need to produce defined
behaviour.
This especially helps on ARM/AArch64 where the vcvt instructions
naturally saturate the result.
Differential Revision: https://reviews.llvm.org/D111976
It causes builds to fail with this assert:
llvm/include/llvm/ADT/APInt.h:990:
bool llvm::APInt::operator==(const llvm::APInt &) const:
Assertion `BitWidth == RHS.BitWidth && "Comparison requires equal bit widths"' failed.
See comment on the code review.
> This adds a fold in DAGCombine to create fptosi_sat from sequences for
> smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
> the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
> it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
> ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
> to be handled similarly.
>
> A shouldConvertFpToSat method was added to control when converting may
> be profitable. The original fptosi will have a less strict semantics
> than the fptosisat, with less values that need to produce defined
> behaviour.
>
> This especially helps on ARM/AArch64 where the vcvt instructions
> naturally saturate the result.
>
> Differential Revision: https://reviews.llvm.org/D111976
This reverts commit 52ff3b0093.
This adds a fold in DAGCombine to create fptosi_sat from sequences for
smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
to be handled similarly.
A shouldConvertFpToSat method was added to control when converting may
be profitable. The original fptosi will have a less strict semantics
than the fptosisat, with less values that need to produce defined
behaviour.
This especially helps on ARM/AArch64 where the vcvt instructions
naturally saturate the result.
Differential Revision: https://reviews.llvm.org/D111976
On RISC-V, icmp is not sunk (as the following snippet shows) which
generates the following suboptimal branch pattern:
```
core_list_find:
lh a2, 2(a1)
seqz a3, a0 <<
bltz a2, .LBB0_5
bnez a3, .LBB0_9 << should sink the seqz
[...]
j .LBB0_9
.LBB0_5:
bnez a3, .LBB0_9 << should sink the seqz
lh a1, 0(a1)
[...]
```
due to an icmp not being sunk.
The blocks after `codegenprepare` look as follows:
```
define dso_local %struct.list_head_s* @core_list_find(%struct.list_head_s* readonly %list, %struct.list_data_s* nocapture readonly %info) local_unnamed_addr #0 {
entry:
%idx = getelementptr inbounds %struct.list_data_s, %struct.list_data_s* %info, i64 0, i32 1
%0 = load i16, i16* %idx, align 2, !tbaa !4
%cmp = icmp sgt i16 %0, -1
%tobool.not37 = icmp eq %struct.list_head_s* %list, null
br i1 %cmp, label %while.cond.preheader, label %while.cond9.preheader
while.cond9.preheader: ; preds = %entry
br i1 %tobool.not37, label %return, label %land.rhs11.lr.ph
```
where the `%tobool.not37` is the result of the icmp that is not sunk.
Note that it is computed in the basic-block up until what becomes the
`bltz` instruction and the `bnez` is a basic-block of its own.
Compare this to what happens on AArch64 (where the icmp is correctly sunk):
```
define dso_local %struct.list_head_s* @core_list_find(%struct.list_head_s* readonly %list, %struct.list_data_s* nocapture readonly %info) local_unnamed_addr #0 {
entry:
%idx = getelementptr inbounds %struct.list_data_s, %struct.list_data_s* %info, i64 0, i32 1
%0 = load i16, i16* %idx, align 2, !tbaa !6
%cmp = icmp sgt i16 %0, -1
br i1 %cmp, label %while.cond.preheader, label %while.cond9.preheader
while.cond9.preheader: ; preds = %entry
%1 = icmp eq %struct.list_head_s* %list, null
br i1 %1, label %return, label %land.rhs11.lr.ph
```
This is caused by sinkCmpExpression() being skipped, if multiple
condition registers are supported.
Given that the check for multiple condition registers affect only
sinkCmpExpression() and shouldNormalizeToSelectSequence(), this change
adjusts the RISC-V target as follows:
* we no longer signal multiple condition registers (thus changing
the behaviour of sinkCmpExpression() back to sinking the icmp)
* we override shouldNormalizeToSelectSequence() to let always select
the preferred normalisation strategy for our backend
With both changes, the test results remain unchanged. Note that without
the target-specific override to shouldNormalizeToSelectSequence(), there
is worse code (more branches) generated for select-and.ll and select-or.ll.
The original test case changes as expected:
```
core_list_find:
lh a2, 2(a1)
bltz a2, .LBB0_5
beqz a0, .LBB0_9 <<
[...]
j .LBB0_9
.LBB0_5:
beqz a0, .LBB0_9 <<
lh a1, 0(a1)
[...]
```
Differential Revision: https://reviews.llvm.org/D98932
If we have a large enough floating point type that can exactly
represent the integer value, we can convert the value to FP and
use the exponent to calculate the leading/trailing zeros.
The exponent will contain log2 of the value plus the exponent bias.
We can then remove the bias and convert from log2 to leading/trailing
zeros.
This doesn't work for zero since the exponent of zero is zero so we
can only do this for CTLZ_ZERO_UNDEF/CTTZ_ZERO_UNDEF. If we need
a value for zero we can use a vmseq and a vmerge to handle it.
We need to be careful to make sure the floating point type is legal.
If it isn't we'll continue using the integer expansion. We could split the vector
and concatenate the results but that needs some additional work and evaluation.
Differential Revision: https://reviews.llvm.org/D111904
Previously these would crash. I don't think these can be generated
directly from C. Not sure if any optimizations can introduce them.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D113527
Not all scalar element types are allowed in vectors so we may not
be able to bitcast to a 1 element vector to use insert/extract.
This will become a bigger issue when the Zve extensions are commited.
For now, I'm using the ELEN limit to limit the element types.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D113219
This is consistent with what we do for other operands that are required
to be constants.
I don't think this results in any real changes. The pattern match
code for isel treats ConstantSDNode and TargetConstantSDNode the same.
These and MULHS/MULHU both default to Legal. Targets need to set
the ones they don't support to Expand.
I think MULHS/MULHU likely has priority in most places so this
change probably isn't directly testable. I found it while looking
at disabling MULHS/MULHU for nxvXi64 as required for Zve64x.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D113325
Similar to D110206, this patch optimizes unmasked vp.load intrinsics to
avoid the need of a vmset instruction to set the mask. It does so by
selecting a riscv_vle intrinsic rather than a riscv_vle_mask intrinsic.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D113022
Add new hasVInstructions() which is currently equivalent.
Replace vector uses of hasStdExtZfh/F/D with new vector specific
versions. The vector spec no longer requires that the vectors implement the
same types as scalar. It only requires that the scalar type is
the maximum size the vectors can support. This is currently
implemented using the scalar rule we were using before.
Add new hasVInstructionsI64() begin using to qualify code that
requires i64 vector elements.
This is all NFC for now, but we can start using this to better
implement D112408 which introduces the Zve extensions.
Reviewed By: frasercrmck, eopXD
Differential Revision: https://reviews.llvm.org/D112496
This can avoid a loss of decoupling with the scalar unit on cores
with decoupled scalar and vector units.
We should support FP too, but those use extract_element and not a
custom ISD node so it is a little different. I also left a FIXME
in the test for i64 extract and store on RV32.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D109482
If one input of a fixed vector multiply is a sign/zero extend and
the other operand is a splat of a scalar, we can use a widening
multiply if the scalar value has sufficient sign/zero bits.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D110028
This particular case was creating a `VMSET_VL` using the old
fixed-length type in order to pass a mask to other custom nodes
operating on the scalable container type. This kind of thing wasn't
caught for us; I only noticed when experimenting with odd-length
vectors, where it was trying to generate an invalid `v3i1` MVT.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D110420
Add the tail policy argument to LLVM IR intrinsics. There are two policies for tail elements. Tail agnostic means users do not care about the values in the tail elements and tail undisturbed means the values in the tail elements need to be kept after the operation. In order to let users control the tail policy, we add an additional argument at the end of the argument list.
For unmasked operations, we have no maskedoff and the tail policy is always tail agnostic. If users want to keep tail elements under unmasked operations, they could use all one mask in the masked operations to do it. So, we only add the additional argument for masked operations for most cases. There are exceptions listed below.
In this patch, we do not handle the following cases to reduce the complexity of the patch. There could be two separate patches for them.
* Use dest argument to control tail policy
vmerge.vvm/vmerge.vxm/vmerge.vim (add _t builtins with additional dest argument)
vfmerge.vfm (add _t builtins with additional dest argument)
vmv.v.v (add _t builtins with additional dest argument)
vmv.v.x (add _t builtins with additional dest argument)
vmv.v.i (add _t builtins with additional dest argument)
vfmv.v.f (add _t builtins with additional dest argument)
vadc.vvm/vadc.vxm/vadc.vim (add _t builtins with additional dest argument)
vsbc.vvm/vsbc.vxm (add _t builtins with additional dest argument)
* Always has tail argument for masked/unmasked intrinsics
Vector Single-Width Integer Multiply-Add Instructions (add _t and _mt builtins)
Vector Widening Integer Multiply-Add Instructions (add _t and _mt builtins)
Vector Single-Width Floating-Point Fused Multiply-Add Instructions (add _t and _mt builtins)
Vector Widening Floating-Point Fused Multiply-Add Instructions (add _t and _mt builtins)
Vector Reduction Operations (add _t and _mt builtins)
Vector Slideup Instructions (add _t and _mt builtins)
Vector Slidedown Instructions (add _t and _mt builtins)
Discussion: https://github.com/riscv/rvv-intrinsic-doc/pull/101
Differential Revision: https://reviews.llvm.org/D105092
This patch adds codegen support for lowering the vector-predicated
reduction intrinsics to RVV instructions. The process is similar to that
of the other reduction intrinsics, save for the fact that every VP
reduction has a start value. We reuse the existing custom "VL" nodes,
adding extra patterns where required to handle non-true masks.
To support these nodes, the `RISCVISD::VECREDUCE_*_VL` nodes have been
given an explicit "merge" operand. This is to faciliate the VP
reductions, where we must be careful to ensure that even if no operation
is performed (when VL=0) we still produce the start value. The RVV
reductions don't update the destination register under these conditions,
so we tie the splatted start value to the output register.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D107657
We can use riscv_vse intrinsic instead of riscv_vse_mask. The code here
is based on similar code for handling masked.scatter and vp.scatter.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D110206
This requires a minor change to CodeGenPrepare to ensure that
shouldSinkOperands will be called for And.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D110106
Optimize (add (mul x, c0), c1) -> (ADDI (MUL (ADDI, c1/c0), c0), c1%c0),
if c1/c0 and c1%c0 are simm12, while c1 is not.
Optimize (add (mul x, c0), c1) -> (MUL (ADDI, c1/c0), c0),
if c1%c0 is zero, and c1/c0 is simm12 while c1 is not.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D108607
For strided accesses the loop vectorizer seems to prefer creating a
vector induction variable with a start value of the form
<i32 0, i32 1, i32 2, ...>. This value will be incremented each
loop iteration by a splat constant equal to the length of the vector.
Within the loop, arithmetic using splat values will be done on this
vector induction variable to produce indices for a vector GEP.
This pass attempts to dig through the arithmetic back to the phi
to create a new scalar induction variable and a stride. We push
all of the arithmetic out of the loop by folding it into the start,
step, and stride values. Then we create a scalar GEP to use as the
base pointer for a strided load or store using the computed stride.
Loop strength reduce will run after this pass and can do some
cleanups to the scalar GEP and induction variable.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D107790
LICM may have pulled out a splat, but with .vx instructions we
can fold it into an operation.
This patch enables CGP to reverse the LICM transform and move the
splat back into the loop.
I've started with the commutable integer operations and shifts, but we can
extend this with more operations in future patches.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D109394
Since i128 isn't a legal C type on RV32, I don't believe
libgcc implements these functions for RV32. compiler-rt
does implement them because i128 support is enabled
in order to handle long double.
This is consistent with 32-bit X86 and ARM.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D109383
This patch adds support for the vector-predicated `VP_STORE` and
`VP_LOAD` nodes. We do this in the same way we lower `MSTORE` and
`MLOAD`: to regular load/store instructions via intrinsics.
One necessary change was made to `SelectionDAGLegalize` so that
`VP_STORE` nodes' operation actions are taken from the stored "value"
operands, in the same vein as `STORE` or `MSTORE`.
Reviewed By: craig.topper, rogfer01
Differential Revision: https://reviews.llvm.org/D108999
This patch adds support for the `VP_SCATTER` and `VP_GATHER` nodes by
lowering them to RVV's `vsox`/`vlux` instructions, respectively. This
process is almost identical to the existing `MSCATTER`/`MGATHER` support.
One extra change was made to `SelectionDAGLegalize` so that
`VP_SCATTER`'s operation action is derived from its stored "value"
operand rather than its return type (which is always the chain).
Reviewed By: craig.topper, rogfer01
Differential Revision: https://reviews.llvm.org/D108987
This patch changes the register class to avoid accidentally setting
the AVL operand to X0 through MachineIR optimizations.
There are cases where we really want to use X0, but we can't get that
past the MachineVerifier with the register class as GPRNoX0. So I've
use a 64-bit -1 as a sentinel for X0. All other immediate values should
be uimm5. I convert it to X0 at the earliest possible point in the VSETVLI
insertion pass to avoid touching the rest of the algorithm. In
SelectionDAG lowering I'm using a -1 TargetConstant to hide it from
instruction selection and treat it differently than if the user
used -1. A user -1 should be selected to a register since it doesn't
fit in uimm5.
This is the rest of the changes started in D109110. As mentioned there,
I don't have a failing test from MachineIR optimizations anymore.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D109116
If the true and false values are the same, we don't need a SELECT_CC.
This would normally be folded before a select is legalized to
select_cc. The test case exploits the late legalization of vscale
to trigger a case where they become identical after legalization.
This works around an issue found on a test case in D107957. In that
case the true/false values were both eventually 0 and the select was
used by a vector AVL operand. The select_cc got expanded to control
flow and a phi, but the phi inputs were both copies from X0. MachineIR
optimizations simplified this to a single copy from X0 going into the
vector instruction. This became the input of a vsetvli after vsetvli
insertion. Then register coalescing folded the copy into the vsetvli.
X0 as the source of a vsetvli is a special encoding and should not be
created by coalesing. We need to fix our vsetvli handling to make sure
this can never happen any other way, but removing the unneeded select
is still a worthwhile optimization.
Similar to D108842, D108844, D108926, D108928, and D108936.
__has_builtin(builtin_mul_overflow) returns true for 32b RISCV targets,
but Clang is deferring to compiler RT when encountering long long types.
If the semantics of __has_builtin mean "the compiler resolves these,
always" then we shouldn't conditionally emit a libcall.
Link: https://bugs.llvm.org/show_bug.cgi?id=28629
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D108939
This adds an ELEN limit for fixed length vectors. This will scalarize
any elements larger than this. It will also disable some fractional
LMULs. For example, if ELEN=32 then mf8 becomes illegal, i32/f32
vectors can't use any fractional LMULs, i16/f16 can only use mf2,
and i8 can use mf2 and mf4.
We may also need something for the scalable vectors, but that has
interactions with the intrinsics and we can't scalarize a scalable
vector.
Longer term this should come from one of the Zve* features
Victor Perez