Similar to what we do for add/sub/mul.
This can help remove some sext.w. There are some regressions on
some bswap tests, but I have an idea how to fix that for a follow up.
A new PACKW pattern is added to handle the new sext_inreg placement.
Differential Revision: https://reviews.llvm.org/D108663
This encapsulates the APInt creation and worklist management into
a helper function.
To keep one common interface I've use Log2_32 in places that
previously created a mask by subtracting 1 from a power of 2.
Differential Revision: https://reviews.llvm.org/D108324
We already do this for non-constants RHS. This just removes the
special case. I believe the special case may have been needed
because the ANY_EXTEND of a constant used to create zero extended
constants, but we recently changed that to produce sign extended
constants.
D107658 is needed to prevent some regressions.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D107697
Similar for sub except sub isn't commutative.
Modify the existing and/or/xor folds to also work on ISD::SELECT
and not just RISCVISD::SELECT_CC. This is needed to make sure
we do this transform before type legalization turns i32 add/sub
into add/sub+sign_extend_inreg on RV64. If we don't do this before
that, the sign_extend_inreg will still be after the select.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D107603
Shuffles which are broken into separate halves reveal splats in which
a half is accessed via one index; such operations can be optimized to
use "vrgather.vi".
This optimization could be achieved by adding extra patterns to match
`vrgather_vv_vl` which uses a splat as an index operand, but this patch
instead identifies splat earlier. This way, future optimizations can
build on top of the data gathered here, e.g., to splat-gather dominant
indices and insert any leftovers.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D107449
Previously we converted ISD condition codes to integers and stored
them directly in our MIR instructions. The ISD enum kind of belongs
to SelectionDAG so that seems like incorrect layering.
This patch instead uses a CondCode node on RISCV::SELECT_CC until
isel and then converts it from ISD encoding to a RISCV specific value.
This value can be converted to/from the RISCV branch opcodes in the
RISCV namespace.
My larger motivation is to possibly support a microarchitectural
feature of some CPUs where a short forward branch over a single
instruction can be predicated internally. This will require a new
pseudo instruction for select that needs to carry a branch condition
and live probably until RISCVExpandPseudos. At that point it can be
expanded to control flow without other instructions ending up in the
predicated basic block. Using an ISD encoding in RISCVExpandPseudos
doesn't seem like correct layering.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D107400
The fcvt fp to integer instructions saturate if their input is
infinity or out of range, but the instructions produce a maximum
integer for nan instead of 0 required for the ISD opcodes.
This means we can use the instructions to do the saturating
conversion, but we'll need to fix up the nan case at the end.
We can probably improve the i8 and i16 default codegen as well,
but I'll leave that for a follow up.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D107230
This patch extends the optimization of VID-sequence BUILD_VECTORs
introduced in D104921 to include simple fractional steps composed of a
separated integer numerator and denominator.
A notable limitation in this sequence detection is that only sequences
with steps N/1 or 1/D are found, meaning that the step between elements
and the frequency with which it changes is consistent across the whole
sequence. Fractional steps such as 2/3 won't be matched as those would
involve more complex tracking of state or some level of backtracking.
As is stands, however, this patch is sufficient to match common
interleave-type shuffle indices, for example matching `<0,0,1,1>` (or
commonly `<0,u,1,u>` or `<u,0,u,1>`) to an index sequence divided by 2.
While the optimization is relatively `undef`-tolerant, due to greedy
pattern-matching there even are some simple patterns which confuse the
sequence detection into identifying either a suboptimal sequence or no
sequence at all.
Currently only fractional-step sequences identified as having a
power-of-two denominator are actually lowered to RVV instructions. This
is to avoid introducing divisions into the generated code.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106533
This patch aims to improve the performance of BUILD_VECTORs which are
identified as containing a dominant element. Given that most
floating-point constants themselves require a load from the constant
pool, it was possible for the optimization to actually increase the
number of individual loads on small vectors. The exception is the zero
constant -- +0.0 -- which can be materialized efficiently.
While this optimization could do with a proper cost model to weigh the
benfits of a single vector load vs. the manipulation of individual
elements -- even for integer vectors which often require several
instructions to materialize -- without a concrete RVV implementation to
work with any heuristic is likely to be both more obtuse and inaccurate.
Until then, this patch fixes at least one known obvious deficiency.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106963
The sign_extend we insert here can get turned into a zero_extend if
the sign bit is known zero. This can enable a setcc combine that
shrinks compares with zero_extend. This reduces the use count of
the zero_extend allowing other combines to turn it back into an
any_extend.
This restricts the combine to only cases where the result is used
by a CopyToReg. This works for my original motivating case. I
hope the CopyToReg use will prevent any converted extends from
turning back into an any_extend.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D106754
This patch adds support for lowering the saturating vector add/sub
intrinsics to RVV instructions, for both fixed-length and
scalable-vector forms alike.
Note that some of the DAG combines are still not triggering for the
scalable-vector tests. These require a bit more work in the DAGCombiner
itself.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106651
I stumbled onto a case where our (sext_inreg (assertzexti32 (fptoui X)), i32)
isel pattern can cause an fcvt.wu and fcvt.lu to be emitted if
the assertzexti32 has an additional user. If we add a one use check
it would just cause a fcvt.lu followed by a sext.w when only need
a fcvt.wu to satisfy both users.
To mitigate this I've added custom isel and new ISD opcodes for
fcvt.wu. This allows us to keep know it started life as a conversion
to i32 without needing to match multiple nodes. ComputeNumSignBits
has been taught that this new nodes produces 33 sign bits. To
prevent regressions when we need to zero extend the result of an
(i32 (fptoui X)), I've added a DAG combine to convert it to an
(i64 (fptoui X)) before type legalization. In most cases this would
happen in InstCombine, but a zero_extend can be created for function
returns or arguments.
To keep everything consistent I've added new nodes for fptosi as well.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D106346
Lowering certain float vectors without legal vector types could cause a
crash due to a bad interaction between passing floats via GPRs and
argument splitting. Split vector floats appear just like scalar floats.
Under certain situations we choose to pass these float arguments via
GPRs and use an XLenVT location and set the 'BCvt' info to track how
they must be converted back to floating-point values. However, later
logic for handling split arguments may take over, in which case we lose
the previous information and set the 'Indirect' info, thus incorrectly
lowering to integer types.
I don't believe that we would have come across the notion of split
floating-point arguments before. This patch addresses the issue by
updating the lowering so that split arguments are only passed indirectly
when they are scalar integer types.
This has some change to how we lower some larger illegal float vectors,
as can be seen in 'fastcc-float.ll' where the vector is now passed
partly in registers and partly on the stack.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D102852
This relands a6ca88e908 which was originally
reverted due to overflow bugs in e3fa2b1eab.
This patch teaches the compiler to identify a wider variety of
`BUILD_VECTOR`s which form integer arithmetic sequences, and to lower
them to `vid.v` with modifications for non-unit steps and non-zero
addends.
The sequences handled by this optimization must either be monotonically
increasing or decreasing. Consecutive elements holding the same value
indicate a fractional step which, while simple mathematically,
becomes more complex to handle both in the realm of lossy integer
division and in the presence of `undef`s.
For example, a common "interleaving" shuffle index will be lowered by
LLVM to both `<0,u,1,u,2,...>` and `<u,0,u,1,u,...>` `BUILD_VECTOR`
nodes. Either of these would ideally be lowered to `vid.v` shifted right
by 1. Detection of this sequence in presence of general `undef` values
is more complicated, however: `<0,u,u,1,>` could match either
`<0,0,0,1,>` or `<0,0,1,1,>` depending on later values in the sequence.
Both are possible, so backtracking or multiple passes is inevitable.
Sticking to monotonic sequences keeps the logic simpler as it can be
done in one pass. Fractional steps will likely be a separate
optimization in a future patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104921
The existing rule about the operand type is strange. Instead, just say
the operand is a TargetConstant with the right width. (Legalization
ignores TargetConstants, so it doesn't matter if that width is legal.)
Highlights:
1. I had to substantially rewrite the AArch64 isel patterns to expect a
TargetConstant. Nothing too exotic, but maybe a little hairy. Maybe
worth considering a target-specific node with some dagcombines instead
of this complicated nest of isel patterns.
2. Our behavior on RV32 for vectors of i64 has changed slightly. In
particular, we correctly preserve the width of the arithmetic through
legalization. This changes the DAG a bit. Maybe room for
improvement here.
3. I explicitly defined the behavior around overflow. This is necessary
to make the DAGCombine transforms legal, and I don't think it causes any
practical issues.
Differential Revision: https://reviews.llvm.org/D105673
If we need to shift left anyway we might be able to take advantage
of LUI implicitly shifting its immediate left by 12 to cover part
of the shift. This allows us to use more bits of the LUI immediate
to avoid an ADDI.
isDesirableToCommuteWithShift now considers compressed instruction
opportunities when deciding if commuting should be allowed.
I believe this is the same or similar to one of the optimizations
from D79492.
Reviewed By: luismarques, arcbbb
Differential Revision: https://reviews.llvm.org/D105417
I don't think the semantics of the llvm masked gather intrinsic care
about the order the elements are loaded. For example, type legalization
by splitting will chain them in parallel. This is different than
scatter which we do chain in order.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D106025
RISCV would prefer a sign extended constant since that works better
with our constant materialization. We have an existing TLI hook we
use to control sign extension of setcc operands in type legalization.
That hook happens to do the right check we need here, but might be
straying from its original purpose. With only RISCV defining this
hook in tree, I wasn't sure if it was worth adding another hook
with identical behavior.
This is an alternative to D105785 where I tried to handle this in
the RISCV backend by not creating ANY_EXTENDs in some places.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D105918
We assume VLENB is a multiple of 8 and previously relied on shift
pairs being optimized to an AND+SHL/SHR and computeKnownBits
removing the AND. This doesn't happen if (vlenb >> 3) gets CSEd
to have multiple uses. This patch manually emits the best shift
to workaround this.
If the upper 32 bits are zero and bit 31 is set, we might be able to
use zext.w to fill in the zeros after using an lui and/or addi.
Most of this patch is plumbing the subtarget features into the constant
materialization.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D105509
This patch teaches the compiler to identify a wider variety of
`BUILD_VECTOR`s which form integer arithmetic sequences, and to lower
them to `vid.v` with modifications for non-unit steps and non-zero
addends.
The sequences handled by this optimization must either be monotonically
increasing or decreasing. Consecutive elements holding the same value
indicate a fractional step which, while simple mathematically,
becomes more complex to handle both in the realm of lossy integer
division and in the presence of `undef`s.
For example, a common "interleaving" shuffle index will be lowered by
LLVM to both `<0,u,1,u,2,...>` and `<u,0,u,1,u,...>` `BUILD_VECTOR`
nodes. Either of these would ideally be lowered to `vid.v` shifted right
by 1. Detection of this sequence in presence of general `undef` values
is more complicated, however: `<0,u,u,1,>` could match either
`<0,0,0,1,>` or `<0,0,1,1,>` depending on later values in the sequence.
Both are possible, so backtracking or multiple passes is inevitable.
Sticking to monotonic sequences keeps the logic simpler as it can be
done in one pass. Fractional steps will likely be a separate
optimization in a future patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104921
Using positive zero as the neutral element in 'fadd' reductions, while
it generates better code, is incorrect. The correct neutral element is
negative zero: 0.0 + -0.0 = 0.0, whereas -0.0 + -0.0 = -0.0.
There are perhaps more optimal lowerings of negative zero avoiding
constant-pool loads which could be left as future work.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D105902
We don't really have optimizations for division with a constant
LHS. If we don't use a W instruction we end up needing to sign
or zero extend the RHS to use the 64-bit instruction.
I had to sign_extend i32 constants on the LHS instead of using
any_extend which becomes zero_extend. If we don't do this, constants
that were originally negative become harder to materialize. I think
this problem exists for more of our W instruction cases. For example
(i32 (shl -1, X)), but we don't have lit tests. I'll work on that
as a follow up.
I also left a FIXME for enabling W instruction for RHS constants
under -Oz.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D105769
Similar to D46745, "S" represents an absolute symbolic operand, which
can be used to specify the access models, e.g.
extern int var;
void *addr_via_asm() {
void *ret;
asm("lui %0, %%hi(%1)\naddi %0,%0,%%lo(%1)" : "=r"(ret) : "S"(&var));
return ret;
}
'S' is documented in trunk GCC: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101275
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D105254
Often when lowering vector shuffles, we split the shuffle into two
LHS/RHS shuffles which are then blended together. To do so we split the
original indices into two, indexed into each respective vector. These
two index vectors are then separately lowered as BUILD_VECTORs.
This patch forwards on any undef indices to the BUILD_VECTOR, rather
than having the VECTOR_SHUFFLE lowering decide on an optimal concrete
index. The motiviation for ths change is so that we don't duplicate
optimization logic between the two lowering methods and let BUILD_VECTOR
do what it does best.
Propagating undef in this way allows us, for example, to generate
`vid.v` to produce the LHS indices of commonly-used interleave-type
shuffles. I have designs on further optimizing interleave-type and other
common shuffle patterns in the near future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104789
These are fp->int conversions using either RMM or dynamic rounding modes.
The lround and lrint opcodes have a return type of either i32 or
i64 depending on sizeof(long) in the frontend which should follow
xlen. llround/llrint should always return i64 so we'll need a libcall
for those on rv32.
The frontend will only emit the intrinsics if -fno-math-errno is in
effect otherwise a libcall will be emitted which will not use
these ISD opcodes.
gcc also does this optimization.
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D105206
This adds a DAG combine to detect sext/zext inputs and emit a
new ISD opcode. The extends will either be removed or replaced
with narrower extends.
Isel patterns are used to match add and widening mul to vwmacc
similar to the recently added vmacc patterns.
There's still some work to be to match vmulsu.
We should also rewrite splats that were extended as scalars and
then splatted.
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D104802
It seems it is possible for DAG combine to create a shl with an
i64 result type and an i32 shift amount. This is ok before type
legalization since the type don't need to match in SelectionDAG.
This results in type legalization calling LowerOperation to
legalize just the amount. We weren't expecting this so we
asserted for not finding a fixed vector shift.
To fix this, I've added a check for the fixed vector case and
returned SDValue() to get the default type legalizer. I've
factored all shifts together and added a fixed vector specific
handler to avoid repeating similar code for each in
LowerOperation.
The particular case I found was exposed by D104581, but the bad
shift is created after that patch triggers.
If type legalization is going to insert a sign_extend for other users
of X and we can fold the sign_extend into ADDW/MULW/SUBW, it is
better to replace the ANY_EXTEND so we don't end up with a separate
ADD/MUL/SUB instruction for the users of the ANY_EXTEND.
I'm only handling setcc uses right now, but there are other
instructions that force sign_extends like ashr.
There are probably other *W instructions we could use in addition
to ADDW/SUBW/MULW.
My motivating case was a loop terminating compare and a phi use
as seen in the new test file.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D104581
This patch optimizes the code generation of vector-type SELECTs (LLVM
select instructions with scalar conditions) by custom-lowering to
VSELECTs (LLVM select instructions with vector conditions) by splatting
the condition to a vector. This avoids the default expansion path which
would either introduce control flow or fully scalarize.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104772
With the exception of `frem`, this patch supports the current set of VP
floating-point binary intrinsics by lowering them to to RVV instructions. It
does so by using the existing `RISCVISD *_VL` custom nodes as an intermediate
layer. Both scalable and fixed-length vectors are supported by using this
method.
The `frem` node is unsupported due to a lack of available instructions. For
fixed-length vectors we could scalarize but that option is not (currently)
available for scalable-vector types. The support is intentionally left out so
it equivalent for both vector types.
The matching of vector/scalar forms is currently lacking, as scalable vector
types do not lower to the custom `VFMV_V_F_VL` node. We could either make
floating-point scalable vector splats lower to this node, or support the
matching of multiple kinds of splat via a `ComplexPattern`, much like we do for
integer types.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D104237
This patch adds support for loading and storing unaligned vectors via an
equivalently-sized i8 vector type, which has support in the RVV
specification for byte-aligned access.
This offers a more optimal path for handling of unaligned fixed-length
vector accesses, which are currently scalarized. It also prevents
crashing when `LegalizeDAG` sees an unaligned scalable-vector load/store
operation.
Future work could be to investigate loading/storing via the largest
vector element type for the given alignment, in case that would be more
optimal on hardware. For instance, a 4-byte-aligned nxv2i64 vector load
could loaded as nxv4i32 instead of as nxv16i8.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104032
This patch changes RVV's policy for its supported list of fixed-length
vector types by capping by vector size rather than element count. Now
all 1024-byte vectors (of supported element types) are supported, rather
than all 256-element vectors.
This is a more natural fit for the architecture, and allows us to, for
example, improve the support for vector bitcasts.
This change necessitated the adding of some new simple types to avoid
"regressing" on the number of currently-supported vectors. We round out
the 1024-byte types by adding `v512i8`, `v1024i8`, `v512i16` and
`v512f16`.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103884
This patch is a simple fix which registers CONCAT_VECTORS as
custom-lowered for scalable mask vectors. This follows the pattern of
all other scalable-vector types, as the default expansion of
CONCAT_VECTORS cannot handle scalable types, and even if it did it'd go
through the stack and generate worse code.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103896
Include known bits support so we know we don't need to zext the
output if the input was already zero extended.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D103757
We should be exiting when the shift amount is greater than
the bit width regardless of whether it is a power of 2.
Reported by Simon Pilgrim here https://reviews.llvm.org/D96661
This requires getting a shift amount that is out of bounds that
wasn't already optimized by SelectionDAG. This would be pretty
trick to construct a test for.
Or it would require a non-power of 2 shift amount and a mask
that has runs of ones and zeros of the next lowest power of 2 from
that shift amount. I tried a little to produce a test for this,
but didn't get it to work.
Don't require a specific kind of IRBuilder for TargetLowering hooks.
This allows us to drop the IRBuilder.h include from TargetLowering.h.
Differential Revision: https://reviews.llvm.org/D103759
RVV vectors must be aligned to their element types, so anything less is
unaligned.
For regular loads and stores, our custom-lowering of fixed-length
vectors meant that we opted out of LegalizeDAG's built-in unaligned
expansion. This patch adds that logic in to our custom lower function.
For masked intrinsics, we declare that anything unaligned is not legal,
leaving the ScalarizeMaskedMemIntrin pass to do the expansion for us.
Note that neither of these methods can handle the expansion of
scalable-vector memory ops, so those cases are left alone by this patch.
Scalable loads and stores already go through expansion by default but
hit an assertion, and scalable masked intrinsics will silently generate
incorrect code. It may be prudent to return an error in both of these
cases.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102493
This patch extends the RISC-V lowering of the 'fastcc' calling
convention to vector types, both fixed-length and scalable. Without this
patch, any function passing or returning vector types by value would
throw a compiler error.
Vectors are handled in 'fastcc' much as they are in the default calling
convention, the noticeable difference being the extended set of scalar
GPR registers that can be used to pass vectors indirectly.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102505
This patch fixes a bug in lowering scalable-vector types in RISC-V's
main calling convention. When scalable-vector types are split and passed
indirectly, the target is responsible for scaling the offset --
initially set to the known-minimum store size -- by the scalable factor.
Before this we were issuing overlapping loads or stores to the different
parts, leading to incorrect codegen.
Credit to @HsiangKai for spotting this.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D103262
This patch custom lowers FP_TO_[US]INT and [US]INT_TO_FP conversions
between floating-point and boolean vectors. As the default action is
scalarization, this patch both supports scalable-vector conversions and
improves the code generation for fixed-length vectors.
The lowering for these conversions can piggy-back on the existing
lowering, which lowers the operations to a supported narrowing/widening
conversion and then either an extension or truncation.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103312
This patch adds a way for the target to configure the type it uses for
the explicit vector length operands of VP SDNodes. The type must be a
legal integer type (there is still no target-independent legalization of
this operand) and must currently be at least as big as i32, the type
used by the IR intrinsics. An implicit zero-extension takes place on
targets which choose a larger type. All VP nodes should be created with
this type used for the EVL operand.
This allows 64-bit RISC-V to avoid custom legalization of all VP nodes,
keeping them in their target-independent form for that bit longer.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D103027
DAGCombine's `mergeStoresOfConstantsOrVecElts` optimization is told
whether it's to use vector types and also whether it's to issue a
truncating store. However, the truncating store code path assumes a
scalar integer `ConstantSDNode`, and when using vector types it creates
either a `BUILD_VECTOR` or `CONCAT_VECTORS` to store: neither of which
is a constant.
The `riscv64` target is able to expose a crash here because it switches
on both code paths at the same time. The `f32` is stored as `i32` which
must be promoted to `i64`, necessitating a truncating store.
It also decides later that it prefers a vector store of `v2f32`.
While vector truncating stores are legal, this combine is not able to
emit them. We also don't have a test case. This patch adds an assert to
catch this case more gracefully, and updates one of the caller functions
to the function to turn off the use of truncating stores when preferring
vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103173
The vector calling convention dictates that when the vector argument
registers are exhaused, GPRs are used to pass the address via the stack.
When the GPRs themselves are exhausted, at best we would previously
crash with an assertion, and at worst we'd generate incorrect code.
This patch addresses this issue by passing fixed-length vectors via the
stack with their full fixed-length size and aligned to their element
type size. Since the calling convention lowering can't yet handle
scalable vector types, this patch adds a fatal error to make it clear
that we are lacking in this regard.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102422
This patch extends the cases in which the legalizer is able to express
VSELECT in terms of XOR/AND/OR. When dealing with a VSELECT between
boolean vector types, the mask itself is an all-ones or all-ones value
of the operand type, so a 0/1 boolean type behaves identically to a 0/-1
type.
This greatly helps RISC-V which relies on expansion for these nodes. It
also allows scalable-vector bool VSELECTs to use the default expansion,
where before it would crash in SelectionDAG::UnrollVectorOp.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103147
SEW=64 shifts only uses the log2(64) bits of shift amount. If we're
splatting a 64 bit value in 2 parts, we can avoid splatting the
upper bits and just let the low bits be sign extended. They won't
be read anyway.
For the purposes of SelectionDAG semantics of the generic ISD opcodes,
if hi was non-zero or bit 31 of the low is 1, the shift was already
undefined so it should be ok to replace high with sign extend of low.
In order do be able to find the split i64 value before it becomes
a stack operation, I added a new ISD opcode that will be expanded
to the stack spill in PreprocessISelDAG. This new node is conceptually
similar to BuildPairF64, but I expanded earlier so that we could
go through regular isel to get the right VLSE opcode for the LMUL.
BuildPairF64 is expanded in a CustomInserter.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D102521
This is a replacement for D101938 for inserting vsetvli
instructions where needed. This new version changes how
we track the information in such a way that we can extend
it to be aware of VL/VTYPE changes in other blocks. Given
how much it changes the previous patch, I've decided to
abandon the previous patch and post this from scratch.
For now the pass consists of a single phase that assumes
the incoming state from other basic blocks is unknown. A
follow up patch will extend this with a phase to collect
information about how VL/VTYPE change in each block and
a second phase to propagate this information to the entire
function. This will be used by a third phase to do the
vsetvli insertion.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D102737
RVV code generation does not successfully custom-lower BUILD_VECTOR in all
cases. When it resorts to default expansion it may, on occasion, be expanded to
scalar stores through the stack. Unfortunately these stores may then be picked
up by the post-legalization DAGCombiner which merges them again. The merged
store uses a BUILD_VECTOR which is then expanded, and so on.
This patch addresses the issue by overriding the `mergeStoresAfterLegalization`
hook. A lack of granularity in this method (being passed the scalar type) means
we opt out in almost all cases when RVV fixed-length vector support is enabled.
The only exception to this rule are mask vectors, which are always either
custom-lowered or are expanded to a load from a constant pool.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102913
The default expansion for BUILD_VECTORs -- save for going through
shuffles -- is to go through the stack. This method only works when the
type is at least byte-sized, so for v2i1 and v4i1 we would crash.
This patch ensures that small mask-type BUILD_VECTORs are always handled
without crashing. We lower to a SETCC of the equivalent i8 type.
This also exposes some pre-existing issues where the lowering when
optimizing for size results in larger code than without. Those will be
tackled in future patches.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102767
The use of `SelectionDAG::getSplatValue` isn't guaranteed to return a
type-legal splat value as it may implicitly extract a vector element
from another shuffle. It is not permitted to introduce an illegal type
when lowering shuffles.
This patch addresses the crash by adding a boolean flag to
`getSplatValue`, defaulting to false, which when set will ensure a
type-legal return value. If it is unable to do that it will fail to
return a splat value.
I've been through the existing uses of `getSplatValue` in other targets
and was unable to find a need or test cases showing a need to update
their uses. In some cases, the call is made during `LegalizeVectorOps`
which may still produce illegal scalar types. In other situations, the
illegally-typed splat value may be quickly patched up to a legal type
(such as any-extending the returned `extract_vector_elt` up to a legal
type) before `LegalizeDAG` notices.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102687
Like the element extraction of these vectors, we choose to promote up to
an i8 vector type and perform the insertion there.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102697
The VSEW encoding isn't a useful value to pass around. It's better
to use SEW or log2(SEW) directly. The only real ugliness is that
the vsetvli IR intrinsics use the VSEW encoding, but it's easy
enough to decode that when the intrinsic is processed.
My thought process is that if v2i64 is an LMUL=1 type then v2i32
should be an LMUL=1/2 type. We limit the fractional LMUL so that
SEW=64 clips to LMUL=1, SEW=32 clips to LMUL=1/2, etc. This
ensures there's always a fractional LMUL available to truncate a type.
This does reduce the number of vsetvlis in some cases.
Some tests increase vsetvlis because the best container type for a
mask type is dependent on the LMUL+SEW that the mask was produced
from, but you can't tell that from the type. I think this is
something we need to solve this in the machine IR when optimizing
vsetvlis.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D101215
This patch extends VectorLegalizer::ExpandSELECT to permit expansion
also for scalable vector types. The only real change is conditionally
checking for BUILD_VECTOR or SPLAT_VECTOR legality depending on the
vector type.
We can use this to fix "cannot select" errors for scalable vector
selects on the RISCV target. Note that in future patches RISCV will
possibly custom-lower vector SELECTs to VSELECTs for branchless codegen.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102063
This patch supports all of the current set of VP integer binary
intrinsics by lowering them to to RVV instructions. It does so by using
the existing RISCVISD *_VL custom nodes as an intermediate layer. Both
scalable and fixed-length vectors are supported by using this method.
One notable change to the existing vector codegen strategy is that
scalable all-ones and all-zeros mask SPLAT_VECTORs are now lowered to
RISCVISD VMSET_VL and VMCLR_VL nodes to match their fixed-length
BUILD_VECTOR counterparts. This allows them to reuse the existing
"all-ones" VL patterns.
To reduce the size of the phabricator diff, some tests are intentionally
left out and will be added later if the patch is accepted.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101826
Previously, RISC-V would make legal all fixed-length vectors types whose
size are less than or equal to some function of the minimum value of
VLEN and the maximum-permissible LMUL grouping.
Due to vector legalization issues, this patch instead caps the legal
fixed-length vector types to those with 256 elements. This value was
chosen because it is the longest vector length which has corresponding
MVTs across all supported element types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101839
This patch adds support for splatting i1 types to fixed-length or
scalable vector types. It does so by lowering the operation to a SETCC
of the equivalent i8 type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101465
This shrinks the immediate that isel table needs to emit for these
instructions. Hoping this allows me to change OPC_EmitInteger to
use a better variable length encoding for representing negative
numbers. Similar to what was done a few months ago for OPC_CheckInteger.
The alternative encoding uses less bytes for negative numbers, but
increases the number of bytes need to encode 64 which was a very
common number in the RISCV table due to SEW=64. By using Log2 this
becomes 6 and is no longer a problem.
DAGCombiner was recently taught how to combine STEP_VECTOR nodes,
meaning the step value is no longer guaranteed to be one by the time it
reaches the backend for lowering.
This patch supports such cases on RISC-V by lowering to other step
values to a multiply following the vid.v instruction. It includes a
small optimization for common cases where the multiply can be expressed
as a shift left.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D100856
Similar for or/xor with 0 in place of -1.
This is the canonical form produced by InstCombine for something like `c ? x & y : x;` Since we have to use control flow to expand select we'll usually end up with a mv in basic block. By folding this we may be able to pull the and/or/xor into the block instead and avoid a mv instruction.
The code here is based on code from ARM that uses this to create predicated instructions. I'm doing it on SELECT_CC so it happens late, but we could do it on select earlier which is what ARM does. I'm not sure if we lose any combine opportunities if we do it earlier.
I left out add and sub because this can separate sext.w from the add/sub. It also made a conditional i64 addition/subtraction on RV32 worse. I guess both of those would be fixed by doing this earlier on select.
The select-binop-identity.ll test has not been commited yet, but I made the diff show the changes to it.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D101485
This replaces D98479.
This allows type legalization to form SPLAT_VECTOR_PARTS so we don't
lose the splattedness when the scalar type is split.
I'm handling SPLAT_VECTOR_PARTS for fixed vectors separately so
we can continue using non-VL nodes for scalable vectors.
I limited to RV32+vXi64 because DAGCombiner::visitBUILD_VECTOR likes
to form SPLAT_VECTOR before seeing if it can replace the BUILD_VECTOR
with other operations. Especially interesting is a splat BUILD_VECTOR of
the extract_vector_elt which can become a splat shuffle, but won't if
we form SPLAT_VECTOR first. We either need to reorder visitBUILD_VECTOR
or add visitSPLAT_VECTOR.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100803
This seems like a reasonable upper bound on VL. WG discussions for
the V spec would probably allow us to use 2^16 as an upper bound
on VLEN, but this is good enough for now.
This allows us to remove sext and zext if user happens to assign
the size_t result into an int and then uses it as a VL intrinsic
argument which is size_t.
Reviewed By: frasercrmck, rogfer01, arcbbb
Differential Revision: https://reviews.llvm.org/D101472
This is an complementary/alternative fix for D99068. It takes a slightly
different approach by explicitly summing up all of the required split
part type sizes and ensuring we allocate enough space for them. It also
takes the maximum alignment of each part.
Compared with D99068 there are fewer changes to the stack objects in
existing tests. However, @luismarques has shown in that patch that there
are opportunities to reduce our stack usage in the future.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D99087
This adds a special operand type that is allowed to be either
an immediate or register. By giving it a unique operand type the
machine verifier will ignore it.
This perturbs a lot of tests but mostly it is just slightly different
instruction orders. Something bad did happen to some min/max reduction
tests. We're spilling vector registers when we weren't before.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D101246
This modifies my previous patch to push the strided load formation
to isel. This gives us opportunity to fold the splat into a .vx
operation first. Using a scalar register and a .vx operation reduces
vector register pressure which can be important for larger LMULs.
If we can't fold the splat into a .vx operation, then it can make
sense to use a strided load to free up the vector arithmetic
ALU to do actual arithmetic rather than tying it up with vmv.v.x.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D101138
We have several extensions that need i32 to be Custom for
INTRINSIC_WO_CHAIN with RV64 so enable it for all RV64.
For V extension, make i32 Custom for RV64 and i64 Custom for RV32.
When the i32 or i64 is legal, the operation action doesn't matter.
LegalizeDAG checks MVT::Other rather than the real type.
This teaches DAG combine that shift amount operands for grev, gorc
shfl, unshfl only read a few bits.
This also teaches DAG combine that grevw, gorcw, shflw, unshflw,
bcompressw, bdecompressw only consume the lower 32 bits of their
inputs.
In the future we can teach SimplifyDemandedBits to also propagate
demanded bits of the output to the inputs in some cases.
Use getContainerForFixedLengthVector and getRegClassIDForVecVT to
get the register class to use when making a fixed vector type legal.
Inline it into the other two call sites.
I'm looking into using fractional lmul for fixed length vectors
and getLMULForFixedLengthVector returned an integer making it
unable to express this. I considered returning the LMUL
enum, but that seemed like it would introduce more complexity to
convert it for use.
Make it a static function RISCVISelLowering, the only place it
is used.
I think I'm going to make this return a fractional LMULs in some
cases so I'm sorting out where it should live before I start
making changes.
We can have RISCVISelDAGToDAG.cpp call the VT only version by
finding the RISCVTargetLowering object via the Subtarget.
Make the static versions just global static functions in
RISCVISelLowering that can be called by static functions in that
file.
This patch adds support for both scalable- and fixed-length vector code
lowering of the llvm.minnum and llvm.maxnum intrinsics to the equivalent
RVV instructions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101035
Implementations are allowed to optimize an x0 stride to perform
less memory accesses. This is the case in SiFive cores.
No idea if this is the case in other implementations. We might
need a tuning flag for this.
Reviewed By: frasercrmck, arcbbb
Differential Revision: https://reviews.llvm.org/D100815
Rather than doing splatting each separately and doing bit manipulation
to merge them in the vector domain, copy the data to the stack
and splat it using a strided load with x0 stride. At least on
some implementations this vector load is optimized to not do
a load for each element.
This is equivalent to how we move i64 to f64 on RV32.
I've only implemented this for the intrinsic fallbacks in this
patch. I think we do similar splatting/shifting/oring in other
places. If this is approved, I'll refactor the others to share
the code.
Differential Revision: https://reviews.llvm.org/D101002
The value is always an immediate and can never be in a register.
This the kind of thing TargetConstant is for.
Saves a step GenDAGISel to convert a Constant to a TargetConstant.
This recognizes the case when Hi is (sra Lo, 31). We can use
SPLAT_VECTOR_I64 rather than splatting the high bits and
combining them in the vector register.
As noted in the FIXME there's a sort of agreement that the any
extra bits stored will be 0.
The generated code is pretty terrible. I was really hoping we
could use a tail undisturbed trick, but tail undisturbed no
longer applies to masked destinations in the current draft
spec.
Fingers crossed that it isn't common to do this. I doubt IR
from clang or the vectorizer would ever create this kind of store.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100618
This patch extends the lowering of RVV fixed-length vector shuffles to
avoid the default stack expansion and instead lower to vrgather
instructions.
For "permute"-style shuffles where one vector is swizzled, we can lower
to one vrgather. For shuffles involving two vector operands, we lower to
one unmasked vrgather (or splat, where appropriate) followed by a masked
vrgather which blends in the second half.
On occasion, when it's not possible to create a legal BUILD_VECTOR for
the indices, we use vrgatherei16 instructions with 16-bit index types.
For 8-bit element vectors where we may have indices over 255, we have a
fairly blunt fallback to the stack expansion to avoid custom-splitting
of the vector types.
To enable the selection of masked vrgather instructions, this patch
extends the various RISCVISD::VRGATHER nodes to take a passthru operand.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100549
Craig Topper