If this happens the operands aren't updated and the existing node is returned. Make sure we pass this existing node up to the DAG combiner so that a proper replacement happens. Otherwise we get stuck in an infinite loop with an unoptimized node.
llvm-svn: 338090
I'm not sure if this was trying to avoid optimizing the new nodes further or what. Or maybe to prevent a cycle if something tried to reform the multiply? But I don't think its a reliable way to do that. If the user of the expanded multiply is visited by the DAGCombiner after this conversion happens, the DAGCombiner will check its operands, see that they haven't been visited by the DAGCombiner before and it will then add the first node to the worklist. This process will repeat until all the new nodes are visited.
So this seems like an unreliable prevention at best. So this patch just returns the new nodes like any other combine. If this starts causing problems we can try to add target specific nodes or something to more directly prevent optimizations.
Now that we handle the combine normally, we can combine any negates the mul expansion creates into their users since those will be visited now.
llvm-svn: 338007
These calls were making sure some newly created nodes were added to worklist, but the DAGCombiner has internal support for ensuring it has visited all nodes. Any time it visits a node it ensures the operands have been queued to be visited as well. This means if we only need to return the last new node. The DAGCombiner will take care of adding its inputs thus walking backwards through all the new nodes.
llvm-svn: 337996
- Avoid duplication of regmask size calculation.
- Simplify allocateRegisterMask() call.
- Rename allocateRegisterMask() to allocateRegMask() to be consistent
with naming in MachineOperand.
llvm-svn: 337986
We generated a subtract for the power of 2 minus one then negated the result. The negate can be optimized away by swapping the subtract operands, but DAG combine doesn't know how to do that and we don't add any of the new nodes to the worklist anyway.
This patch makes use explicitly emit the swapped subtract.
llvm-svn: 337858
Use a left shift and 2 subtracts like we do for 30. Move this out from behind the slow lea check since it doesn't even use an LEA.
Use this for multiply by 14 as well.
llvm-svn: 337856
This seems to be a net improvement. There's still an issue under avx512f where we have a 512-bit vpaddd, but not vpmaddwd so we end up doing two 256-bit vpmaddwds and inserting the results before a 512-bit vpaddd. It might be better to do two 512-bits paddds with zeros in the upper half. Same number of instructions, but breaks a dependency.
llvm-svn: 337656
Ideally our ISD node types going into the isel table would have types consistent with their instruction domain. This prevents us having to duplicate patterns with different types for the same instruction.
Unfortunately, it seems our shuffle combining is currently relying on this a little remove some bitcasts. This seems to enable some switching between shufps and shufd. Hopefully there's some way we can address this in the combining.
Differential Revision: https://reviews.llvm.org/D49280
llvm-svn: 337590
CombineTo is most useful when you need to replace multiple results, avoid the worklist management, or you need to something else after the combine, etc. Otherwise you should be able to just return the new node and let DAGCombiner go through its usual worklist code.
All of the places changed in this patch look to be standard cases where we should be able to use the more stand behavior of just returning the new node.
Differential Revision: https://reviews.llvm.org/D49569
llvm-svn: 337589
We can safely use getConstant here as we're still lowering, which allows constant folding to kick in and simplify the vector shift codegen.
Noticed while working on D49562.
llvm-svn: 337578
This is an early step towards using SimplifyDemandedVectorElts for target shuffle combining - this merely moves the existing X86ISD::VBROADCAST simplification code to use the SimplifyDemandedVectorElts mechanism.
Adds X86TargetLowering::SimplifyDemandedVectorEltsForTargetNode to handle X86ISD::VBROADCAST - in time we can support all target shuffles (and other ops) here.
llvm-svn: 337547
We have a number of cases where we fail to reduce vector op widths, performing the op in a larger vector and then extracting a subvector. This is often because by default it would create illegal types.
This peephole patch attempts to handle a few common cases detailed in PR36761, which typically involved extension+conversion to vX2f64 types.
Differential Revision: https://reviews.llvm.org/D49556
llvm-svn: 337500
Returning SDValue() means nothing was changed. Returning the result of CombineTo returns the first argument of CombineTo. This is specially detected by DAGCombiner as meaning that something changed, but worklist management was already taken care of.
I think the only real effect of this change is that we now properly update the Statistic the counts the number of combines performed. That's the only thing between the check for null and the check for N in the DAGCombiner.
llvm-svn: 337491
As discussed on PR38197, this canonicalizes MOVS*(N0, OP(N0, N1)) --> MOVS*(N0, SCALAR_TO_VECTOR(OP(N0[0], N1[0])))
This returns the scalar-fp codegen lost by rL336971.
Additionally it handles the OP(N1, N0)) case for commutable (FADD/FMUL) ops.
Differential Revision: https://reviews.llvm.org/D49474
llvm-svn: 337419
When rL336971 removed the scalar-fp isel patterns, we lost the need for this canonicalization - commutation/folding can handle everything else.
llvm-svn: 337387
I'm trying to restrict the MOVLHPS/MOVHLPS ISD nodes to SSE1 only. With SSE2 we can use unpcks. I believe this will allow some patterns to be cleaned up to require fewer bitcasts.
I've put in an odd isel hack to still select MOVHLPS instruction from the unpckh node to avoid changing tests and because movhlps is a shorter encoding. Ideally we'd do execution domain switching on this, but the operands are in the wrong order and are tied. We might be able to try a commute in the domain switching using custom code.
We already support domain switching for UNPCKLPD and MOVLHPS.
llvm-svn: 337348
This unfortunately requires a bunch of bitcasts to be added added to SUBREG_TO_REG, COPY_TO_REGCLASS, and instructions in output patterns. Otherwise tablegen seems to default to picking f128 and then we fail when something tries to get the register class for f128 which isn't always valid.
The test changes are because we were previously mixing fr128 and vr128 due to contrainRegClass finding FR128 first and passes like live range shrinking weren't handling that well.
llvm-svn: 337147
canWidenShuffleElements can do a better job if given a mask with ZeroableElements info. Apparently, ZeroableElements was being only used to identify AllZero candidates, but possibly we could plug it into more shuffle matchers.
Original Patch by Zvi Rackover @zvi
Differential Revision: https://reviews.llvm.org/D42044
llvm-svn: 336903
Noticed while updating D42044, lowerV2X128VectorShuffle can improve the shuffle mask with the zeroable data to create a target shuffle mask to recognise more 'zero upper 128' patterns.
NOTE: lowerV4X128VectorShuffle could benefit as well but the code needs refactoring first to discriminate between SM_SentinelUndef and SM_SentinelZero for negative shuffle indices.
Differential Revision: https://reviews.llvm.org/D49092
llvm-svn: 336900
We now use llvm.fma.f32/f64 or llvm.x86.fmadd.f32/f64 intrinsics that use scalar types rather than vector types. So we don't these special ISD nodes that operate on the lowest element of a vector.
llvm-svn: 336883
This converts them to what clang is now using for codegen. Unfortunately, there seem to be a few kinks to work out still. I'll try to address with follow up patches.
llvm-svn: 336871
Summary:
These changes cover the PR#31399.
Now the ffs(x) function is lowered to (x != 0) ? llvm.cttz(x) + 1 : 0
and it corresponds to the following llvm code:
%cnt = tail call i32 @llvm.cttz.i32(i32 %v, i1 true)
%tobool = icmp eq i32 %v, 0
%.op = add nuw nsw i32 %cnt, 1
%add = select i1 %tobool, i32 0, i32 %.op
and x86 asm code:
bsfl %edi, %ecx
addl $1, %ecx
testl %edi, %edi
movl $0, %eax
cmovnel %ecx, %eax
In this case the 'test' instruction can't be eliminated because
the 'add' instruction modifies the EFLAGS, namely, ZF flag
that is set by the 'bsf' instruction when 'x' is zero.
We now produce the following code:
bsfl %edi, %ecx
movl $-1, %eax
cmovnel %ecx, %eax
addl $1, %eax
Patch by Ivan Kulagin
Reviewers: davide, craig.topper, spatel, RKSimon
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48765
llvm-svn: 336768
These ISD nodes try to select the MOVLPS and MOVLPD instructions which are special load only instructions. They load data and merge it into the lower 64-bits of an XMM register. They are logically equivalent to our MOVSD node plus a load.
There was only one place in X86ISelLowering that used MOVLPD and no places that selected MOVLPS. The one place that selected MOVLPD had to choose between it and MOVSD based on whether there was a load. But lowering is too early to tell if the load can really be folded. So in isel we have patterns that use MOVSD for MOVLPD if we can't find a load.
We also had patterns that select the MOVLPD instruction for a MOVSD if we can find a load, but didn't choose the MOVLPD ISD opcode for some reason.
So it seems better to just standardize on MOVSD ISD opcode and manage MOVSD vs MOVLPD instruction with isel patterns.
llvm-svn: 336728
Now that rL336250 has landed, we should prefer 2 immediate shifts + a shuffle blend over performing a multiply. Despite the increase in instructions, this is quicker (especially for slow v4i32 multiplies), avoid loads and constant pool usage. It does mean however that we increase register pressure. The code size will go up a little but by less than what we save on the constant pool data.
This patch also adds support for v16i16 to the BLEND(SHIFT(v,c1),SHIFT(v,c2)) combine, and also prevents blending on pre-SSE41 shifts if it would introduce extra blend masks/constant pool usage.
Differential Revision: https://reviews.llvm.org/D48936
llvm-svn: 336642
Summary:
This adds a reverse transform for the instcombine canonicalizations
that were added in D47980, D47981.
As discussed later, that was worse at least for the code size,
and potentially for the performance, too.
https://rise4fun.com/Alive/Zmpl
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: spatel
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D48768
llvm-svn: 336585
This replaces some asserts in lowerV2F64VectorShuffle with the similar asserts from lowerVIF64VectorShuffle which are more readable. The original asserts mentioned a blend, but there's no guarantee that it is a blend.
Also remove an if that the asserts prove is always true. Mask[0] is always less than 2 and Mask[1] is always at least 2. Therefore (Mask[0] >= 2) + (Mask[1] >= 2) == 1 must wlays be true.
llvm-svn: 336517
Pre-AVX512 (which can perform a quick extend/shift/truncate), extending to 2 v8i16 for the PMULLW and then truncating is more performant than relying on the generic PBLENDVB vXi8 shift path and uses a similar amount of mask constant pool data.
Differential Revision: https://reviews.llvm.org/D48963
llvm-svn: 336513
Splits off isKnownNeverZeroFloat to handle +/- 0 float cases.
This will make it easier to be more aggressive with the integer isKnownNeverZero tests (similar to ValueTracking), use computeKnownBits etc.
Differential Revision: https://reviews.llvm.org/D48969
llvm-svn: 336492
It's a bit neater to write T.isIntOrPtrTy() over `T.isIntegerTy() ||
T.isPointerTy()`.
I used Python's re.sub with this regex to update users:
r'([\w.\->()]+)isIntegerTy\(\)\s*\|\|\s*\1isPointerTy\(\)'
llvm-svn: 336462
The intrinsics can be implemented with a f32/f64 llvm.fma intrinsic and an insert into a zero vector.
There are a couple regressions here due to SelectionDAG not being able to pull an fneg through an extract_vector_elt. I'm not super worried about this though as InstCombine should be able to do it before we get to SelectionDAG.
llvm-svn: 336416
This upgrades all of the intrinsics to use fneg instructions to convert fma into fmsub/fnmsub/fnmadd/fmsubadd. And uses a select instruction for masking.
This matches how clang uses the intrinsics these days.
llvm-svn: 336409
Previously we could only negate the FMADD opcodes. This used to be mostly ok when we lowered FMA intrinsics during lowering. But with the move to llvm.fma from target specific intrinsics, we can combine (fneg (fma)) to (fmsub) earlier. So if we start with (fneg (fma (fneg))) we would get stuck at (fmsub (fneg)).
This patch fixes that so we can also combine things like (fmsub (fneg)).
llvm-svn: 336304
We were only doing this for basic blends, despite shuffle lowering now being good enough to handle more complex blends. This means that the two v8i16 splat shifts are performed in parallel instead of serially as the general shift case.
Reapplied with a fixed (extra null tests) version of rL336113 after reversion in rL336189 - extra test case added at rL336247.
llvm-svn: 336250
We were only doing this for basic blends, despite shuffle lowering now being good enough to handle more complex blends. This means that the two v8i16 splat shifts are performed in parallel instead of serially as the general shift case.
llvm-svn: 336113
I believe all of these are constants so legalizing them should be pretty trivial, but this saves a step.
In one case it looks like we may have been creating a shift amount larger than the shift input itself.
llvm-svn: 336052
This combine runs pretty late and causes us to introduce a shift after the op legalization phase has run. We need to be sure we create the shift with the proper type for the shift amount. If we don't do this, we will still re-legalize the operation properly, but we won't get a chance to fully optimize the truncate that gets inserted.
So this patch adds the necessary truncate when the shift is created. I've also narrowed the subtract that gets created to always be an i32 type. The truncate would have trigered SimplifyDemandedBits to optimize it anyway. But using a more appropriate VT here is free and saves an optimization step.
llvm-svn: 336051
The important part is the creation of the SHLD/SHRD nodes. The compare and the conditional move can use target independent nodes that can be legalized on their own. This gives some opportunities to trigger the optimizations present in the lowering for those things. And its just better to limit the number of places we emit target specific nodes.
The changed test cases still aren't optimal.
Differential Revision: https://reviews.llvm.org/D48619
llvm-svn: 335998
This uses the same technique as for shifts - split the rotation into 4/2/1-bit partial rotations and select those partials based on the amount bit, making use of PBLENDVB if available. This halves the use of PBLENDVB compared to expanding to shifts, which can be a slow op.
Unfortunately I haven't found a decent way to share much of this code with the shift equivalent.
Differential Revision: https://reviews.llvm.org/D48655
llvm-svn: 335957
These opcodes have a fixed type of i8 for their immediate and shouldn't have anything to do with the scalar shift amount used by target independent shift nodes.
llvm-svn: 335578
This recommits r335562 and 335563 as a single commit.
The frontend will surround the intrinsic with the appropriate marshalling to/from a scalar type to match the sigature of the builtin that software expects.
By exposing the vXi1 type directly in the llvm intrinsic we make it available to optimizers much earlier. This can enable the scalar marshalling code to be optimized away.
llvm-svn: 335568
They appear to be untested other than the test case for p37879.ll and I believe we should be using SimplifyDemandedElts here to handle these cases.
llvm-svn: 335436
Changing the logic of scalar mask folding to check for valid input types rather
than against invalid ones, making it more robust and fixing PR37879.
Differential Revision: https://reviews.llvm.org/D48366
llvm-svn: 335323
This should help in lowering the following four intrinsics:
_mm256_cvtepi32_epi8
_mm256_cvtepi64_epi16
_mm256_cvtepi64_epi8
_mm512_cvtepi64_epi8
Differential Revision: https://reviews.llvm.org/D46957
llvm-svn: 335238
I don't believe there is any real reason to have separate X86 specific opcodes for vector compares. Setcc has the same behavior just uses a different encoding for the condition code.
I had to change the CondCodeAction for SETLT and SETLE to prevent some transforms from changing SETGT lowering.
Differential Revision: https://reviews.llvm.org/D43608
llvm-svn: 335173
This patch handles back-end folding of generic patterns created by lowering the
X86 rounding intrinsics to native IR in cases where the instruction isn't a
straightforward packed values rounding operation, but a masked operation or a
scalar operation.
Differential Revision: https://reviews.llvm.org/D45203
llvm-svn: 335037
isVectorClearMaskLegal() is the TLI hook used by the generic
DAGCombiner::XformToShuffleWithZero().
We've grown to accomodate/expect this transform to shuffle
(disabling it more generally results in many regressions).
So I'm narrowly excluding the 256-bit types that clearly
are not worthwhile for AVX1.
I think in most cases we are able to recover by converting
the shuffle back into 'and' ops, but the cases in:
https://bugs.llvm.org/show_bug.cgi?id=37749
...show that there are cracks.
llvm-svn: 334759
This shortcoming was noted in D47330, and the test diffs show we already
had other examples where we failed to fold to a SHRUNKBLEND:
/// Dynamic (non-constant condition) vector blend where only the sign bits
/// of the condition elements are used. This is used to enforce that the
/// condition mask is not valid for generic VSELECT optimizations.
This patch implements an idea from D48043 and would obsolete that patch
because it catches more cases (notable the AVX1 case that was missed there).
All we're doing is allowing the existing transform to fire more often by
removing the post-legalize constraint. All of the relevant feature checks
and other predicates are left as-is.
Differential Revision: https://reviews.llvm.org/D48078
llvm-svn: 334592
Extension to D46954 (PR37426), this patch adds support for v8i16/v16i16 rotations in a similar manner - the conversion of the shift/rotate amount to a multiplication factor and the use of PMULLW to shift left and PMULHUW (ISD::MULHU) to shift the wrapped bits back around to be ORd together.
Differential Revision: https://reviews.llvm.org/D47822
llvm-svn: 334309
Simplify combineVectorTruncationWithPACKUS to mask the upper bits followed by calling truncateVectorWithPACK instead of duplicating with similar code.
This results in the codegen using (V)PACKUSDW on SSE41+ targets for vXi64/vXi32 inputs where before it always used PACKUSWB (along with a lot more bitcasting).
I've raised PR37749 as until we avoid unnecessary concats back to 256-bit for bitwise ops, we can't avoid splitting the input value into 128-bit subvectors for masking.
llvm-svn: 334289
We have some combines/lowerings that attempt to use PACKSS-then-PACKUS and others that use PACKUS-then-PACKSS.
PACKUS is much easier to combine with if we know the upper bits are zero as ComputeKnownBits can easily see through BITCASTs etc. especially now that rL333995 and rL334007 have landed. It also effectively works at byte level which further simplifies shuffle combines.
The only (minor) annoyances are that ComputeKnownBits can sometimes take longer as it doesn't fail as quickly as ComputeNumSignBits (but I'm not seeing any actual regressions in tests) and PACKUSDW only became available after SSE41 so we have more codegen diffs between targets.
llvm-svn: 334276
Simplify combineVectorTruncationWithPACKSS to just a SIGN_EXTEND_INREG followed by using the existing truncateVectorWithPACK instead of duplicating code.
llvm-svn: 334193
Only the bottom 16-bits of BEXTR's control op are required (0:8 INDEX, 15:8 LENGTH).
Differential Revision: https://reviews.llvm.org/D47690
llvm-svn: 334083
Similar to v4i32 SHL, convert v8i16 shift amounts to scale factors instead to improve performance and reduce instruction count. We were already doing this for constant shifts, this adds variable shift support.
Reduces the serial nature of the codegen, which relies on chains of plendvb/pand+pandn+por shifts.
This is a step towards adding support for vXi16 vector rotates.
Differential Revision: https://reviews.llvm.org/D47546
llvm-svn: 334023
Ideally we'd use resolveTargetShuffleInputs to handle faux shuffles as well but:
(a) that code path doesn't handle general/pre-legalized ops/types very well.
(b) I'm concerned about the compute time as they recurse to calls to computeKnownBits/ComputeNumSignBits which would need depth limiting somehow.
llvm-svn: 334007
This is the new version of D46181, allowing setjmp/longjmp
to work correctly with the Intel CET shadow stack by storing
SSP on setjmp and fixing it on longjmp. The patch has been
updated to use the cf-protection-return module flag instead
of HasSHSTK, and the bug that caused D46181 to be reverted
has been fixed with the test expanded to track that fix.
patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D47311
llvm-svn: 333990
Previously we just returned undef, but really we should be returning the pass thru input. We also need to make sure we preserve the chain output that the original intrinsic node had to maintain connectivity in the DAG. So we should just return the incoming chain as the output chain.
llvm-svn: 333804
Noticed while fixing PR37426, for splat rotations (rotation by an uniform value) its better to just expand back to shift ops than performing as a general non-uniform rotation.
llvm-svn: 333661
This improves splat rotations (rotation by an uniform value), to avoid having to use the generic non-uniform shift code (extension to PR37426).
llvm-svn: 333641
Created the IsSplatValue helper from the splat detection code in LowerScalarVariableShift as a first NFC step towards improving support for splat rotations, which is an extension of PR37426.
llvm-svn: 333580
Support for Clang lowering of fused intrinsics. This patch:
1. Removes bindings to clang fma intrinsics.
2. Introduces new LLVM unmasked intrinsics with rounding mode:
int_x86_avx512_vfmadd_pd_512
int_x86_avx512_vfmadd_ps_512
int_x86_avx512_vfmaddsub_pd_512
int_x86_avx512_vfmaddsub_ps_512
supported with a new intrinsic type (INTR_TYPE_3OP_RM).
3. Introduces new x86 fmaddsub/fmsubadd folding.
4. Introduces new tests for code emitted by sequentions introduced in Clang part.
Patch by tkrupa
Reviewers: craig.topper, sroland, spatel, RKSimon
Reviewed By: craig.topper, RKSimon
Differential Revision: https://reviews.llvm.org/D47443
llvm-svn: 333554
There seems to be no real reason to have these separate copies.
The existing implementations just copy each other for x86.
For Mips there is a subtle difference, which is just a bug
since it changes based on the context where which one was called.
Dropping this version, all tests pass. If I try to merge them
to match the removed version, a test fails.
llvm-svn: 333440
1. Introduction of mask scalar TableGen patterns.
2. Introduction of new scalar move TableGen patterns
and refactoring of existing ones.
3. Folding of pattern created by introducing scalar
masking in Clang header files.
Patch by tkrupa
Differential Revision: https://reviews.llvm.org/D47012
llvm-svn: 333419
Summary: We already get this right if the i64 didn't come from a load.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47439
llvm-svn: 333393
We have unmasked intrinsics now and wrap them with a select. This is a net reduction of 36 intrinsics from before the unmasked intrinsics were added.
llvm-svn: 333388
These do the same thing with the first and second sources swapped. They previously came from separate intrinsics that specified different masking behavior. But we can cover that with isel patterns and a single node.
This is a step towards reducing the number of intrinsics needed.
A bunch of tests change because we are now biased to choosing VPERMT over VPERMI when there is nothing to signal that commuting is beneficial.
llvm-svn: 333383
This basically reverts r280696 in favor of using extra patterns as mentioned as an alternative in that commit message. For now I've only added the cases we have test cases for, but it should be easy to add more in the future.
This will help to convert VPERMI2PS/VPERMT2PS intrinsics to use a single ISD node opcode. And hopefully allow some intrinsics to be removed.
llvm-svn: 333365
Summary:
This **appears** to be the last missing piece for the masked merge pattern handling in the backend.
This is [[ https://bugs.llvm.org/show_bug.cgi?id=37104 | PR37104 ]].
[[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]] will introduce an IR canonicalization that is likely bad for the end assembly.
Previously, `andps`+`andnps` / `bsl` would be generated. (see `@out`)
Now, they would no longer be generated (see `@in`), and we need to make sure that they are generated.
Differential Revision: https://reviews.llvm.org/D46528
llvm-svn: 332904
This removes 6 intrinsics since we no longer need separate mask and maskz intrinsics.
Differential Revision: https://reviews.llvm.org/D47124
llvm-svn: 332890
As suggested by Fabian on PR37426, we can use PMULUDQ to perform v4i32 vector rotations as the upper 32bits of the multiply will contain the 'wrapped' bits of the rotation.
v8i16/v16i8 rotations would be straightforward to add to lowerRotate in the future - ideally we'd mostly share code with the vector shifts lowering.
Differential Revision: https://reviews.llvm.org/D46954
llvm-svn: 332832
The intrinsic legalization for masked truncate uses ISD::TRUNCATE which can be constant folded by getNode. This prevents getVectorMaskingNode from seeing the ISD::TRUNCATE special case where it should emit X86ISD::SELECT instead of ISD::VSELECT. This causes a vselect with a v16i1 or v8i1 condition to be emitted during vector legalization. but vector legalization doesn't revisit nodes it creates. DAG combine will then promote this condition to match the result type. Then op legalization will try to legalize it, but the custom lowering hook returned SDValue(). But op legalization doesn't have an Expand for VSELECT because it expects vector legalization to have taken care of it. So the operation sticks around and fails in isel.
This patch adds a custom legalization hook to morph it to a vXi8 vselect instead.
This also simplifies the normal vXi16 vselect handling because vector legalization was normally expanding to AND/ANDN/OR and DAG combine was turning that into VBLENDVB. So we can skip a step by doing it directly.
Fixes PR37499
Differential Revision: https://reviews.llvm.org/D47025
llvm-svn: 332743
As suggested by Fabian on PR37441, use PSHUFLW to extend shift amount types for use with PSRAD/PSRLD to reduce register pressure.
Some of this ideally would be done by combineTargetShuffle but its tricky to do as most of the shuffles are sharing inputs.
Differential Revision: https://reviews.llvm.org/D46959
llvm-svn: 332524
As i64 types are not legal on 32-bit targets, insert these into a suitable zero vector and use the packed vXi64<->FP conversion instructions instead.
Fixes PR3163.
Differential Revision: https://reviews.llvm.org/D43441
llvm-svn: 332498
Summary:
New unsigned saturation downconvert patterns detection was implemented in
X86 Codegen:
(truncate (smin (smax (x, C1), C2)) to dest_type),
where C1 >= 0 and C2 is unsigned max of destination type.
(truncate (smax (smin (x, C2), C1)) to dest_type)
where C1 >= 0, C2 is unsigned max of destination type and C1 <= C2.
These two patterns are equivalent to:
(truncate (umin (smax(x, C1), unsigned_max_of_dest_type)) to dest_type)
Reviewers: RKSimon
Subscribers: llvm-commits, a.elovikov
Differential Revision: https://reviews.llvm.org/D45315
llvm-svn: 332336
With nnan, there's no need for the masked merge / blend
sequence (that probably costs much more than the min/max
instruction).
Somewhere between clang 5.0 and 6.0, we started producing
these intrinsics for fmax()/fmin() in C source instead of
libcalls or fcmp/select. The backend wasn't prepared for
that, so we regressed perf in those cases.
Note: it's possible that other targets have similar problems
as seen here.
Noticed while investigating PR37403 and related bugs:
https://bugs.llvm.org/show_bug.cgi?id=37403
The IR FMF propagation cases still don't work. There's
a proposal that might fix those cases in D46563.
llvm-svn: 331992
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
This is a fix for PR30290: by marking all byval stack slots as being aliased,
the instruction scheduler is more conservative about rescheduling memory
accesses to such stack slots as an LLVM Value* might alias it. This fixes
errors such as in the patched test case, where reads and writes to a data
structure are illegally mixed.
This could be fixed better in the future with better analysis for the
instruction scheduler to know what Values alias what stack slots.
Differential Revision: https://reviews.llvm.org/D45022
llvm-svn: 331749
This patch adds a shadow stack fix when compiling
setjmp/longjmp with the shadow stack enabled. This
allows setjmp/longjmp to work correctly with CET.
Patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D46181
llvm-svn: 331748
Summary:
Split off from D46031.
In masked merge case, this degrades IPC by decreasing instruction count.
{F6108777}
The next patch should be able to recover and improve this.
This also affects the transform @spatel have added in D27489 / rL289738,
and the test coverage for X86 was missing.
But after i have added it, and looked at the changes in MCA, i'm somewhat confused.
{F6093591} {F6093592} {F6093593}
I'd say this regression is an improvement, since `IPC` increased in that case?
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: andreadb, llvm-commits, spatel
Differential Revision: https://reviews.llvm.org/D46493
llvm-svn: 331684
Summary:
The legacy VRCPPS/VRSQRTPS instructions aren't available in 512-bit versions. The new increased precision versions are. So we can use those to implement v16f32 reciprocal estimates.
For KNL CPUs we can probably use VRCP28PS/VRSQRT28PS and avoid the NR step altogether, but I leave that for a future patch.
Reviewers: spatel
Reviewed By: spatel
Subscribers: RKSimon, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D46498
llvm-svn: 331606
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
Previously the flag intrinsics always used the index instructions even if a mask instruction also exists.
To fix fix this I've created a single ISD node type that returns index, mask, and flags. The SelectionDAG CSE process will merge all flavors of intrinsics with the same inputs to a s ingle node. Then during isel we just have to look at which results are used to know what instruction to generate. If both mask and index are used we'll need to emit two instructions. But for all other cases we can emit a single instruction.
Since I had to do manual isel anyway, I've removed the pseudo instructions and custom inserter code that was working around tablegen limitations with multiple implicit defs.
I've also renamed the recently added sse42.ll test case to sttni.ll since it focuses on that subset of the sse4.2 instructions.
Reviewers: chandlerc, RKSimon, spatel
Reviewed By: chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46202
llvm-svn: 331091
Previously we only formed MUL_IMM when we split a constant. This blocked load folding on those cases. We should also form MUL_IMM for 3/5/9 to favor LEA over load folding.
Differential Revision: https://reviews.llvm.org/D46040
llvm-svn: 330850
Summary:
If attribute "use-soft-float"="true" is set then X86ISelLowering.cpp sets
'Promote' action for ISD::SINT_TO_FP operation on type i32.
But 'Promote' action is not proper in this case since lib function
__floatsidf is available for casting from signed int to float type.
Thus Expand action is more suitable here.
The Expand action should be set for ISD::UINT_TO_FP for soft float as well.
If function attribute "use-soft-float"="true" is set then infinite looping
can happen in DAG combining, function visitSINT_TO_FP() replaces SINT_TO_FP
node with UINT_TO_FP node and function combineUIntToFP() replace vice versa in cycle.
The fix prevents it.
Patch by vrybalov
Differential Revision: https://reviews.llvm.org/D45572
llvm-svn: 330711
Three new instructions:
umonitor - Sets up a linear address range to be
monitored by hardware and activates the monitor.
The address range should be a writeback memory
caching type.
umwait - A hint that allows the processor to
stop instruction execution and enter an
implementation-dependent optimized state
until occurrence of a class of events.
tpause - Directs the processor to enter an
implementation-dependent optimized state
until the TSC reaches the value in EDX:EAX.
Also modifying the description of the mfence
instruction, as the rep prefix (0xF3) was allowed
before, which would conflict with umonitor during
disassembly.
Before:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
mfence
After:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
umonitor %rax
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45253
llvm-svn: 330462
This is the patch that lowers x86 intrinsics to native IR
in order to enable optimizations. The patch also includes folding
of previously missing saturation patterns so that IR emits the same
machine instructions as the intrinsics.
Patch by tkrupa
Differential Revision: https://reviews.llvm.org/D44785
llvm-svn: 330322
Summary:
Add an LLVM intrinsic for type discriminated event logging with XRay.
Similar to the existing intrinsic for custom events, but also accepts
a type tag argument to allow plugins to be aware of different types
and semantically interpret logged events they know about without
choking on those they don't.
Relies on a symbol defined in compiler-rt patch D43668. I may wait
to submit before I can see demo everything working together including
a still to come clang patch.
Reviewers: dberris, pelikan, eizan, rSerge, timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45633
llvm-svn: 330219
This completes the work started in r329604 and r329605 when we changed clang to no longer use the intrinsics.
We lost some InstCombine SimplifyDemandedBit optimizations through this change as we aren't able to fold 'and', bitcast, shuffle very well.
llvm-svn: 329990
This cleans up a number of operations that only claimed te use EFLAGS
due to using DF. But no instructions which we think of us setting EFLAGS
actually modify DF (other than things like popf) and so this needlessly
creates uses of EFLAGS that aren't really there.
In fact, DF is so restrictive it is pretty easy to model. Only STD, CLD,
and the whole-flags writes (WRFLAGS and POPF) need to model this.
I've also somewhat cleaned up some of the flag management instruction
definitions to be in the correct .td file.
Adding this extra register also uncovered a failure to use the correct
datatype to hold X86 registers, and I've corrected that as necessary
here.
Differential Revision: https://reviews.llvm.org/D45154
llvm-svn: 329673
The key idea is to lower COPY nodes populating EFLAGS by scanning the
uses of EFLAGS and introducing dedicated code to preserve the necessary
state in a GPR. In the vast majority of cases, these uses are cmovCC and
jCC instructions. For such cases, we can very easily save and restore
the necessary information by simply inserting a setCC into a GPR where
the original flags are live, and then testing that GPR directly to feed
the cmov or conditional branch.
However, things are a bit more tricky if arithmetic is using the flags.
This patch handles the vast majority of cases that seem to come up in
practice: adc, adcx, adox, rcl, and rcr; all without taking advantage of
partially preserved EFLAGS as LLVM doesn't currently model that at all.
There are a large number of operations that techinaclly observe EFLAGS
currently but shouldn't in this case -- they typically are using DF.
Currently, they will not be handled by this approach. However, I have
never seen this issue come up in practice. It is already pretty rare to
have these patterns come up in practical code with LLVM. I had to resort
to writing MIR tests to cover most of the logic in this pass already.
I suspect even with its current amount of coverage of arithmetic users
of EFLAGS it will be a significant improvement over the current use of
pushf/popf. It will also produce substantially faster code in most of
the common patterns.
This patch also removes all of the old lowering for EFLAGS copies, and
the hack that forced us to use a frame pointer when EFLAGS copies were
found anywhere in a function so that the dynamic stack adjustment wasn't
a problem. None of this is needed as we now lower all of these copies
directly in MI and without require stack adjustments.
Lots of thanks to Reid who came up with several aspects of this
approach, and Craig who helped me work out a couple of things tripping
me up while working on this.
Differential Revision: https://reviews.llvm.org/D45146
llvm-svn: 329657
LowerIntUnary as its name says has an assert for integer types. But for the bitcast case one side might be an FP type.
Rather than making sure the function really works for fp types and renaming it. Just do really basic splitting directly. The LowerIntUnary has the advantage that it can peek through BUILD_VECTOR because every other call is during Lowering. But these calls are during legalization and will be followed by a DAG combine round.
Revert some change to LowerVectorIntUnary that were originally made just to make these two calls work even in pure integer cases.
This was found purely by compiling the avx512f-builtins.c test from clang so I've copied over the offending function from that.
llvm-svn: 329616
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: chandlerc, craig.topper, RKSimon
Reviewed By: chandlerc, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44874
llvm-svn: 329534
Previously we used a custom lowering for this because of the AVX1 splitting requirement. But we can do the split during DAG combine if we check the types and subtarget
llvm-svn: 329510
Craig Topper