First step towards adding support for 64-bit unary "sublane" handling (a bit like lowerShuffleAsRepeatedMaskAndLanePermute).
This allows us to add lowerV64I8Shuffle handling.
llvm-svn: 352389
This is tricky to make optimal: sometimes we're better off using
a single wider op, but other times it makes more sense to combine
a narrow ops to achieve the same result.
This solves the case from:
https://bugs.llvm.org/show_bug.cgi?id=40434
There's potentially a similar change for vectors with 64-bit elements,
but it needs adjustments similar to rL352333 to avoid creating infinite
loops.
llvm-svn: 352380
This transform was added with rL351346, and we had
an escape for shufps, but we also want one for
unpckps vs. vpermps because vpermps doesn't take
an immediate shuffle index operand.
llvm-svn: 352333
Although this is longer code, this is no-functional-change-intended.
The goal is to untangle the conditions under which we bail out, so
that's easier to adjust.
llvm-svn: 352320
The add+and sequence followed by a branch can
happen e.g. when looping over the set bits of an integer:
```
while (x != 0) {
func(x & ~x);
x &= x - 1;
}
```
Reviewed By: ctopper
Differential Revision: https://reviews.llvm.org/D57296
llvm-svn: 352306
def32 here means the producing instruction zeroed bits 63:32. We already do this for zext, but it looks like we can get an and+anyext sometimes.
Spotted in the diffs from D33587.
llvm-svn: 352303
Fix issue noted in D57281 that only tested the one use for the SDValue (the result flag), not the entire SUB.
I've added the getNode() to make it clearer what is intended than just the -> redirection.
llvm-svn: 352291
As discussed on PR24545, we should try to commute X86::COND_A 'icmp ugt' cases to X86::COND_B 'icmp ult' to more optimally bind the carry flag output to a SBB instruction.
Differential Revision: https://reviews.llvm.org/D57281
llvm-svn: 352289
We often generate X86ISD::SBB(X, 0) for carry flag arithmetic.
I had tried to create test cases for the ADC equivalent (which often uses the same pattern) but haven't managed to find anything yet.
Differential Revision: https://reviews.llvm.org/D57169
llvm-svn: 352288
This reduces a bit of duplication between the combining and
lowering places that use it, but the primary motivation is
to make it easier to rearrange the lowering logic and solve
PR40434:
https://bugs.llvm.org/show_bug.cgi?id=40434
llvm-svn: 352280
Summary: We have isel patterns for this, but we're missing some load patterns and all broadcast patterns. A DAG combine seems like a better fit for this.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56971
llvm-svn: 352260
Summary:
I'm not sure why we were using SEXTLOAD. EXTLOAD seems more appropriate since we don't care about the upper bits.
This patch changes this and then modifies the X86 post legalization combine to emit a extending shuffle instead of a sign_extend_vector_inreg. Could maybe use an any_extend_vector_inreg, but I just did what we already do in LowerLoad. I think we can actually get rid of this code entirely if we switch to -x86-experimental-vector-widening-legalization.
On AVX512 targets I think we might be able to use a masked vpmovzx and not have to expand this at all.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57186
llvm-svn: 352255
Summary:
Currently, if an instruction with a memory operand has no debug information,
X86DiscriminateMemOps will generate one based on the first line of the
enclosing function, or the last seen debug info.
This may cause confusion in certain debugging scenarios. The long term
approach would be to use the line number '0' in such cases, however, that
brings in challenges: the base discriminator value range is limited
(4096 values).
For the short term, adding an opt-in flag for this feature.
See bug 40319 (https://bugs.llvm.org/show_bug.cgi?id=40319)
Reviewers: dblaikie, jmorse, gbedwell
Reviewed By: dblaikie
Subscribers: aprantl, eraman, hiraditya
Differential Revision: https://reviews.llvm.org/D57257
llvm-svn: 352246
We also need to combine to masked truncating with saturation stores, but I'm leaving that for a future patch.
This does regress some tests that used truncate wtih saturation followed by a masked store. Those now use a truncating store and use min/max to saturate.
Differential Revision: https://reviews.llvm.org/D57218
llvm-svn: 352230
This seems unnecessarily complicated because we gave names to
opposite polarity bools and have code comments that don't really
line up with the logic.
Step 1: remove UndefUpper and assert that it is the opposite of
UndefLower after the initial early exit.
llvm-svn: 352217
Simplify to the generic ISD::ADD/SUB if we don't make use of the result flag.
This mainly helps with ADDCARRY/SUBBORROW intrinsics which get expanded to X86ISD::ADD/SUB but could be simplified further.
Noticed in some of the test cases in PR31754
Differential Revision: https://reviews.llvm.org/D57234
llvm-svn: 352210
This isn't the final fix for our reduction/horizontal codegen, but it takes care
of a lot of the problems. After we narrow the shuffle, existing combines for
insert/extract and binops kick in, and we end up with cheaper 128-bit ops.
The avg and mul reduction tests show an existing shuffle lowering hole for
AVX2/AVX512. I think in its most minimal form this is:
https://bugs.llvm.org/show_bug.cgi?id=40434
...but we might need multiple fixes to get it right.
Differential Revision: https://reviews.llvm.org/D57156
llvm-svn: 352209
As noted in D57156, we want to check at least part of
this pattern earlier (in combining), so this will allow
the code to be shared instead of duplicated.
llvm-svn: 352127
It should be emitted when any floating-point operations (including
calls) are present in the object, not just when calls to printf/scanf
with floating point args are made.
The difference caused by this is very subtle: in static (/MT) builds,
on x86-32, in a program that uses floating point but doesn't print it,
the default x87 rounding mode may not be set properly upon
initialization.
This commit also removes the walk of the types pointed to by pointer
arguments in calls. (To assist in opaque pointer types migration --
eventually the pointee type won't be available.)
That latter implies that it will no longer consider a call like
`scanf("%f", &floatvar)` as sufficient to emit _fltused on its
own. And without _fltused, `scanf("%f")` will abort with error R6002. This
new behavior is unlikely to bite anyone in practice (you'd have to
read a float, and do nothing with it!), and also, is consistent with
MSVC.
Differential Revision: https://reviews.llvm.org/D56548
llvm-svn: 352076
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
llvm-svn: 351965
For AMDGPU the shift amount is never 64-bit, and
this needs to use a 32-bit shift.
X86 uses i8, but seemed to be hacking around this before.
llvm-svn: 351882
For constant bit select patterns, replace one AND with a ANDNP, allowing us to reuse the constant mask. Only do this if the mask has multiple uses (to avoid losing load folding) or if we have XOP as its VPCMOV can handle most folding commutations.
This also requires computeKnownBitsForTargetNode support for X86ISD::ANDNP and X86ISD::FOR to prevent regressions in fabs/fcopysign patterns.
Differential Revision: https://reviews.llvm.org/D55935
llvm-svn: 351819
Similar to horizontal ops on D56777, the sse2 (but not mmx) bit shift ops has local forwarding disabled, adding +1cy to the use latency for the result.
Differential Revision: https://reviews.llvm.org/D57026
llvm-svn: 351817
Similar to horizontal ops on D56777, the vpermilpd/vpermilps variable mask ops has local forwarding disabled, adding +1cy to the use latency for the result.
Differential Revision: https://reviews.llvm.org/D57022
llvm-svn: 351815
First step towards PR40376, this patch adds support for getCmpSelInstrCost to use the (optional) Instruction CmpInst predicate to indicate the type of integer comparison we're performing and alter the costs accordingly.
Differential Revision: https://reviews.llvm.org/D57013
llvm-svn: 351810
When we are inserting 1 "inline" element, and zeroing 2 of the other elements then we can safely commute the insertps source inputs to improve memory folding.
Differential Revision: https://reviews.llvm.org/D56843
llvm-svn: 351807
Summary:
Use X86ISD::VFPROUND in the instruction isel patterns. Add new patterns for ISD::FP_ROUND to maintain support for fptrunc in IR.
In the process I found a couple duplicate isel patterns which I also deleted in this patch.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56991
llvm-svn: 351762
Summary:
For compress, a select node doesn't semantically reflect the behavior of the instruction. The mask would have holes in it, but the resulting write is to contiguous elements at the bottom of the vector.
Furthermore, as far as the compressing and expanding is concerned the behavior is depended on the mask. You can't just have an expand/compress node that only reads the input vector. That node would have no meaning by itself.
This all only works because we pattern match the compress/expand+select back to the instruction. But conceivably an optimization of the select could break the pattern and leave something meaningless.
This patch modifies the expand and compress node to take the mask and passthru as additional inputs and gets rid of the select all together.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57002
llvm-svn: 351761
D56777 added +1cy local forwarding penalty for horizontal operations, but this penalty only affects sse2/xmm variants, the mmx variants don't suffer the penalty.
Confirmed with @andreadb
llvm-svn: 351755
r327630 introduced new write definitions for float/vector loads.
Before that revision, WriteLoad was used by both integer/float (scalar/vector)
load. So, WriteLoad had to conservatively declare a latency to 5cy. That is
because the load-to-use latency for float/vector load is 5cy.
Now that we have dedicated writes for float/vector loads, there is no reason why
we should keep the latency of WriteLoad to 5cy. At the moment, WriteLoad is only
used by scalar integer loads only; we can assume an optimstic 3cy latency for
them.
This patch changes that latency from 5cy to 3cy, and regenerates the affected
scheduling/mca tests.
Differential Revision: https://reviews.llvm.org/D56922
llvm-svn: 351742
This causes a couple of changes in the upgrade tests as signed/unsigned eq/ne are equivalent and we constant fold true/false codes, these changes are the same as what we already do for avx512 cmp/ucmp.
Noticed while cleaning up vector integer comparison costs for PR40376.
llvm-svn: 351697
Prior to SSE41 (and sometimes on AVX1), vector select has to be performed as a ((X & C)|(Y & ~C)) bit select.
Exposes a couple of issues with the min/max reduction costs (which only go down to SSE42 for some reason).
The increase pre-SSE41 selection costs also prevent a couple of tests from firing any longer, so I've either tweaked the target or added AVX tests as well to the existing SSE2 tests.
llvm-svn: 351685
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
Right now we include ${TGT}GenCallingConv.inc once per each instruction
selection method implemented by ${TGT}:
- ${TGT}ISelLowering.cpp
- ${TGT}CallLowering.cpp
- ${TGT}FastISel.cpp
Instead, add a mechanism to tablegen for marking a particular convention
as "External", which causes tablegen to emit into the ::llvm namespace,
instead of as a static helper. This allows us to provide a header to
forward declare it, so we can simply call the function from all the
places it is referenced. Typically the calling convention analyzer is
called indirectly, so it doesn't benefit from inlining.
This saves a bit of final binary size, but mostly just saves object file
size:
before after diff artifact
12852K 12492K -360K X86ISelLowering.cpp.obj
4640K 4280K -360K X86FastISel.cpp.obj
1704K 2092K +388K X86CallingConv.cpp.obj
52448K 52336K -112K llc.exe
I didn't collect before numbers for X86CallLowering.cpp.obj, which is
for GlobalISel, but we should save 360K there as well.
This patch applies the strategy to the X86 backend, but there is no
reason it couldn't be applied to the other backends that implement
multiple ISel strategies, like AArch64.
Reviewers: craig.topper, hfinkel, efriedma
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D56883
llvm-svn: 351616
This sends these intrinsics through isel in a much more normal way. This should allow addressing mode matching in isel to make better use of the displacement field.
llvm-svn: 351583
This sends these intrinsics through isel in a much more normal way. This should allow addressing mode matching in isel to make better use of the displacement field.
Differential Revision: https://reviews.llvm.org/D56827
llvm-svn: 351570
Previously we used ISD::SHL and ISD::SRL to represent these in SelectionDAG. ISD::SHL/SRL interpret an out of range shift amount as undefined behavior and will constant fold to undef. While the intrinsics are defined to return 0 for out of range shift amounts. A previous patch added a special node for VPSRAV to produce all sign bits.
This was previously believed safe because undefs frequently get turned into 0 either from the constant pool or a desire to not have a false register dependency. But undef is treated specially in some optimizations. For example, its ignored in detection of vector splats. So if the ISD::SHL/SRL can be constant folded and all of the elements with in bounds shift amounts are the same, we might fold it to single element broadcast from the constant pool. This would not put 0s in the elements with out of bounds shift amounts.
We do have an existing InstCombine optimization to use shl/lshr when the shift amounts are all constant and in bounds. That should prevent some loss of constant folding from this change.
Patch by zhutianyang and Craig Topper
Differential Revision: https://reviews.llvm.org/D56695
llvm-svn: 351381
This cleans up the duplication we have with both intrinsic isel patterns and vselect isel patterns. This should also allow the intrinsics to get SimplifyDemandedBits support for the condition.
I've switched the canonical pattern in isel to use the X86ISD::BLENDV node instead of VSELECT. Since it always seemed weird to move from BLENDV with its relaxed rules on condition bits to VSELECT which has strict rules about all bits of the condition element being the same. Its more correct to go from VSELECT to BLENDV.
Differential Revision: https://reviews.llvm.org/D56771
llvm-svn: 351380
If we're going to generate a new inverted setcc, we should make sure we will be able to remove the old setcc.
Differential Revision: https://reviews.llvm.org/D56765
llvm-svn: 351378
On Jaguar, horizontal adds/subs have local forwarding disable.
That means, we pay a compulsory extra cycle of write-back stage, and the value
is not available until the end of that stage.
This patch changes the latency of horizontal operations by adding an extra
cycle. With this patch, latency numbers now match what is reported by perf.
I plan to send another patch to also 'fix' the latency of shuffle operations (on
Jaguar, local forwarding is disabled for vector shuffles too).
Differential Revision: https://reviews.llvm.org/D56777
llvm-svn: 351366
Remove the existing assertion and just return false for unexpected shuffle value types (<X x i1> mainly....).
Found while updating combineX86ShufflesRecursively to run within SimplifyDemandedVectorElts/SimplifyDemandedBits.
llvm-svn: 351365
combineX86ShufflesRecursively is pretty cumbersome with a lot of arguments that only matter later in recursion.
This commit adds a wrapper version that only takes the initial root Op to simplify calls that don't need to worry about these.
An early, cleanup step towards merging combineX86ShufflesRecursively into SimplifyDemandedVectorElts/SimplifyDemandedBits.
llvm-svn: 351352
I was trying to prevent shuffle regressions while matching more horizontal ops
and ended up here:
shuf (extract X, 0), (extract X, 4), Mask --> extract (shuf X, undef, Mask'), 0
The affected tests were added for:
https://bugs.llvm.org/show_bug.cgi?id=34380
This patch won't change the examples in the bug report itself, but we should be
able to extend this to catch more types.
Differential Revision: https://reviews.llvm.org/D56756
llvm-svn: 351346
Summary:
Make recoverfp intrinsic target-independent so that it can be implemented for AArch64, etc.
Refer D53541 for the context. Clang counterpart D56748.
Reviewers: rnk, efriedma
Reviewed By: rnk, efriedma
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D56747
llvm-svn: 351281
That's really what it is. If we didn't use intrinsics for BLENDVPS/BLENDVPD/PBLENDVB all the way to isel, this is the node we would use.
llvm-svn: 351278
We're trying to have the vXi1 types in IR as much as possible. This prevents the need for bitcasts when the producer of the mask was already a vXi1 value like an icmp. The bitcasts can be subject to code motion and interfere with basic block at a time isel in bad ways.
llvm-svn: 351275
In keeping with our general direction of having the vXi1 type present in IR, this patch converts the mask argument for avx512 gather to vXi1. This can avoid k-register to GPR to k-register transitions late in codegen.
I left the existing intrinsics behind because they have many out of tree users such as ISPC. They generate their own code and don't go through the autoupgrade path which only works for bitcode and ll parsing. Ideally we will get them to migrate to target independent intrinsics, but it might be easier for them to migrate to these new intrinsics.
I'll work on scatter and gatherpf/scatterpf next.
Differential Revision: https://reviews.llvm.org/D56527
llvm-svn: 351234
Modify getRegForInlineAsmConstraint to return special singleton
register class when a constraint references ST(7) not RFP80 for which
ST(7) is not a member.
llvm-svn: 351206
If we're shuffling with a zero vector, then we are better off not doing VECTOR_SHUFFLE(UNPCK()) as we lose track of those zero elements.
We were already doing this for SSSE3 targets as we have PSHUFB, but its worth doing for all targets.
llvm-svn: 351203
Summary:
In r345197 ESP and RSP were added to GR32_TC/GR64_TC, allowing them to
be used for tail calls, but this also caused `findDeadCallerSavedReg` to
think they were acceptable targets for clobbering. Filter them out.
Fixes PR40289.
Patch by Geoffry Song!
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D56617
llvm-svn: 351146
If we have PSHUFB and we're shuffling with a zero vector, then we are better off not doing VECTOR_SHUFFLE(UNPCK()) as we lose track of those zero elements.
llvm-svn: 351103
add (extractelt (X, 0), extractelt (X, 1)) --> extractelt (hadd X, X), 0
This is the integer sibling to D56011.
There's an additional restriction to only to do this transform in the
case where we don't have extra extracts from the source vector. Without
that, we can fail to match larger horizontal patterns that are more
beneficial than this minimal case. An improvement to the more general
h-op lowering may allow us to remove the restriction here in a follow-up.
llvm-svn: 351093
We can't represent this properly with vselect like we normally do. We also have to update the instruction definition to use a VK2WM mask instead of VK4WM to represent this.
Fixes another case from PR34877
llvm-svn: 351018
We can't represent this properly with vselect like we normally do. We also have to update the instruction definition to use a VK2WM mask instead of VK4WM to represent this.
Fixes another case from PR34877.
llvm-svn: 351017
This patch takes some of the code from D49837 to allow us to enable ISD::ABS support for all SSE vector types.
Differential Revision: https://reviews.llvm.org/D56544
llvm-svn: 350998
The 128-bit input produces 64-bits of output and fills the upper 64-bits with 0. The mask only applies to the lower elements. But we can't represent this with a vselect like we normally do.
This also avoids the need to have a special X86ISD::SELECT when avx512bw isn't enabled since vselect v8i16 isn't legal there.
Fixes another instruction for PR34877.
llvm-svn: 350994
We no longer need to extend mask scalars before bitcasting them to vXi1. This was only needed for the truncate intrinsics. And was really a bug in our lowering of them.
llvm-svn: 350991
We still use i8 for the load/store type. So we need to convert to/from i16 to around the mask type.
By doing this we get an i8->i16 extload which we can then pattern match to a KMOVW if the access is aligned.
llvm-svn: 350989
We can't properly represent this with a vselect since the upper elements of the result are supposed to be zeroed regardless of the mask.
This also reuses the new nodes even when the result type fits in 128 bits if the input is q/d and the result is w/b since vselect w/b using k-register condition isn't legal without avx512bw. Currently we're doing this even when avx512bw is enabled, but I might change that.
This fixes some of PR34877
llvm-svn: 350985
Teach x86 assembly operand parsing to distinguish between assembler
variable assigned to named registers and those assigned to immediate
values.
Reviewers: rnk, nickdesaulniers, void
Subscribers: hiraditya, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D56287
llvm-svn: 350966
Previously, we limited this transform to cases where the
extraction into the build vector happens from vectors of
the same type as the build vector, but that's not required.
There's a slight potential regression seen in the AVX512
result for phadd -- we're using the 256-bit flavor of the
instruction now even though the 128-bit subset is sufficient.
The same problem could already be seen in the AVX2 result.
Follow-up patches will attempt to narrow that back down.
llvm-svn: 350928
We were lowering the last step extract_vector_elt to a bitcast+truncate. Change it to use an extract_vector_elt of index 0 instead. Add isel patterns to do the equivalent of what the bitcast would have done. Plus an isel pattern for an any_extend+extract to prevent some regressions.
Finally add a DAG combine to turn v1i1 scalar_to_vector+extract_vector_elt of 0 into an extract_subvector.
This fixes some of the regressions from D350800.
llvm-svn: 350918
This extends to combineVSelectToShrunkBlend to be able to resimplify SHRUNKBLENDS that have already been created.
This should help some of the regressions from D56387
Differential Revision: https://reviews.llvm.org/D56421
llvm-svn: 350875
Despite what the comment says, FCMP_UNE would be an OR not an AND. In the lowering code the first branch created still goes to the original destination. The second branch was exchanged to go to where the subsequent unconditional branch went. This is different than what we do for FCMP_OEQ where both branches that we create go to the original unconditional branch.
As far as I can tell, I think this means we don't need to exchange the branch target with the unconditional branch for FCMP_UNE at all.
Differential Revision: https://reviews.llvm.org/D56309
llvm-svn: 350873
When we use the partial-matching function on a 128-bit chunk, we must
account for the possibility that we've matched undef halves of the
original source vectors, so the outputs may need to be reset.
This should allow closing PR40243:
https://bugs.llvm.org/show_bug.cgi?id=40243
llvm-svn: 350830
This is a partial fix for:
https://bugs.llvm.org/show_bug.cgi?id=40243
...as seen in the integer test, we still need to correct the result when using the
existing (old) horizontal op matching function because it does not model the way
x86 256-bit horizontal ops return results (each 128-bit half is its own horizontal-op).
A potential follow-up change for that is discussed in the bug report - see also D56490.
This generally duplicates a lot of the existing matching code, but we can't just remove
that without introducing regressions, so the existing code is renamed and used less often.
Follow-ups may try to reduce that overlap.
Differential Revision: https://reviews.llvm.org/D56450
llvm-svn: 350826
Summary:
This pass replaces GR8/GR16/GR32/GR64 with their equivalent sized mask register classes. But VK32/VK64 aren't legal without AVX512BW. Apparently this mostly appears to work if the register coalescer is able to remove the VK32/VK64 register class reference. Or if we don't ever spill it. But there's no guarantee of that.
Another Intel employee managed to trigger a crash due to this with ISPC. Unfortunately, I've lost the test case he sent me at the time. I'm trying to get him to reproduce it for me. I'd like to get this in before 8.0 branches since its a little scary.
The regressions here are unfortunate, but I think we can make some improvements to DAG combine, load folding, etc. to fix them. Just not sure if we can get that done for 8.0.
Fixes PR39741
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56460
llvm-svn: 350800
Found while trying to figure out why my second version of D56421 worked better than the first version. We weren't deleting the vselect in a timely fashion and that caused SimplfyDemandedBit to see an additional user.
The new version doesn't have this problem so this fix isn't needed there, but seemed like the right thing to do.
llvm-svn: 350781
When the result type is v2i64/v2f64 and the index element size is i32, the index vector has two unused elements making the type v4i32. The mask VT should match the number of memory accesses that will be made.
This is consistent with the isel patterns used for the target independent gather/scatter intrinsic.
llvm-svn: 350687
For stack frames on the size of a register in x86, a code size optimization
emits "push rax/eax" instead of "sub" for stack allocation. For example:
foo:
.cfi_startproc
BB#0:
pushq %rax
Ltmp0:
.cfi_def_cfa_offset 16
...
.cfi_endproc
However, we are falling back to DWARF in this case because we cannot
encode %rax as a saved register.
This requirement is wrong, since we don't care about the contents of
%rax, it is the equivalent of a sub.
In order to specify that we care about the contents of %rax, we would
need a .cfi_offset %rax, <offset>.
It's also overzealous in the case where there are pushes for callee saved
registers followed by a "push rax/eax" instead of "sub", in which case we should
also be able to encode the callee saved regs and everything else using compact
unwind.
Patch authored by Bruno Cardoso Lopes.
Differential Revision: https://reviews.llvm.org/D13793
llvm-svn: 350623
Summary: AVX512VBMI2 supports a funnel shift by immediate and a funnel shift by a variable vector.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56361
llvm-svn: 350498
There are no test changes here in the existing cost model
regression tests because integer add/sub have a default
legal cost of 1 already. This would break, however, if
we custom lower those ops because the default cost model
assumes that custom-lowered ops are more expensive.
This is similar to the change in rL350403. See discussion
in D56011 for more details. When we enhance that patch to
handle integer ops, we need this cost model change to avoid
unintended diffs here from the custom lowering.
llvm-svn: 350496
This was here because out and in instructions allow '(%dx)' even though its not a memory reference. To handle this we build a special operand for the DX register reference before we get to the call to CheckBaseRegAndIndexRegAndScale. So we no longer need this special case.
llvm-svn: 350483
This is especially helpful on targets without avx512bw since we don't have a good way to convert from v16i8/v32i8 to v16i1/v32i1 for the truncate anyway. If we're just going to convert it to a GPR we might as well use pmovmskb to accomplish both.
llvm-svn: 350480
We don't need to require the first operand to be an integer because we already said it was the same type as the result which we also constrained to an integer.
llvm-svn: 350455
The 1st try for this was at rL350369, but it caused IR-level diffs because
our cost models differentiate custom vs. legal/promote lowering. So that was
reverted at rL350373. The cost models were fixed independently at rL350403,
so this is effectively the same patch as last time.
Original commit message:
This would show up if we fix horizontal reductions to narrow as they go along,
but it's an improvement for size and/or Jaguar (fast-hops) independent of that.
We need to do this late to not interfere with other pattern matching of larger
horizontal sequences.
We can extend this to integer ops in a follow-up patch.
Differential Revision: https://reviews.llvm.org/D56011
llvm-svn: 350421
Noticed in D56011 - handle the case that scalar fp ops are quicker on P3 than P4
Add the other costs so that we're not relying on the default "is legal/custom" cost logic.
llvm-svn: 350403
Doing this late so we will prefer to fold the AND into a masked comparison first. That can be better for the live range of the mask register.
Differential Revision: https://reviews.llvm.org/D56246
llvm-svn: 350374
This would show up if we fix horizontal reductions to narrow as they go along,
but it's an improvement for size and/or Jaguar (fast-hops) independent of that.
We need to do this late to not interfere with other pattern matching of larger
horizontal sequences.
We can extend this to integer ops in a follow-up patch.
Differential Revision: https://reviews.llvm.org/D56011
llvm-svn: 350369
As noted in PR39973 and D55558:
https://bugs.llvm.org/show_bug.cgi?id=39973
...this is a partial implementation of a fold that we do as an IR canonicalization in instcombine:
// extelt (binop X, Y), Index --> binop (extelt X, Index), (extelt Y, Index)
We want to have this in the DAG too because as we can see in some of the test diffs (reductions),
the pattern may not be visible in IR.
Given that this is already an IR canonicalization, any backend that would prefer a vector op over
a scalar op is expected to already have the reverse transform in DAG lowering (not sure if that's
a realistic expectation though). The transform is limited with a TLI hook because there's an
existing transform in CodeGenPrepare that tries to do the opposite transform.
Differential Revision: https://reviews.llvm.org/D55722
llvm-svn: 350354
INC/DEC are pretty much the same as ADD/SUB except that they don't update the C flag.
This patch removes the special nodes and just pattern matches from ADD/SUB during isel if the C flag isn't being used.
I had to avoid selecting DEC is the result isn't used. This will become a SUB immediate which will turned into a CMP later by optimizeCompareInstr. This lead to the one test change where we use a CMP instead of a DEC for an overflow intrinsic since we only checked the flag.
This also exposed a hole in our RMW flag matching use of hasNoCarryFlagUses. Our root node for the match is a store and there's no guarantee that all the flag users have been selected yet. So hasNoCarryFlagUses needs to check copyToReg and machine opcodes, but it also needs to check for the pre-match SETCC, SETCC_CARRY, BRCOND, and CMOV opcodes.
Differential Revision: https://reviews.llvm.org/D55975
llvm-svn: 350245
Peek through shift modulo masks while matching double shift patterns.
I was hoping to delay this until I could remove the X86 code with generic funnel shift matching (PR40081) but this will do for now.
Differential Revision: https://reviews.llvm.org/D56199
llvm-svn: 350222
All of these use custom isel so we can pretty easily detect the differences in the custom code in X86ISelDAGToDAG. The ISD opcodes just need to express the desired semantics not the details of how they would be selected by isel. So unifying them lets us remove the special casing from lowering.
llvm-svn: 350206
These require a different X86ISD node to be created than i16/i32/i64. I guess no one wanted to add the special code for that except in LowerXALUO. But now LowerXALUO, LowerSELECT, and LowerBRCOND all use a common helper function so they all share the special code.
Unfortunately, there are no test changes because we seem to correct the miss in a DAG combine later. I did verify it manually using test cases from xmulo.ll
llvm-svn: 350205
This makes it easier to keep the LowerBRCOND and LowerSELECT code in sync with LowerXALUO so they always pick the same operation for overflowing instructions.
This is inspired by the helper functions used by ARM and AArch64 for the same purpose.
The test change is because LowerSELECT was not in sync with LowerXALUO with regard to INC/DEC for SADDO/SSUBO.
llvm-svn: 350198
This seems to be getting in the way more than its helping. This does mean we stop scalarizing some cases, but I'm not convinced the scalarization was really better.
Some of the changes to vsel-cmp-load.ll are a regression but D56156 should fix it.
llvm-svn: 350159
This allows us to sign extend to v4i32 first. And then share that extension to implement the final steps to v4i64 using a pcmpgt and punpckl and punpckh.
We already do something similar for SIGN_EXTEND with -x86-experimental-vector-widening-legalization.
llvm-svn: 350158
This was tricking us into making these operations and then letting them get scalarized later. But I can't prove that the scalarized version is actually better.
llvm-svn: 350141
Previously we emitted a multiply and some masking that was supposed to matched to PMULUDQ, but the masking could sometimes be removed before we got a chance to match it. So instead just emit the PMULUDQ directly.
Remove the DAG combine that was added when the ReplaceNodeResults code was originally added. Add a new DAG combine to avoid regressions in shrink_vmul.ll
Some of the shrink_vmul.ll test cases now pick PMULUDQ instead of PMADDWD/PMULLD, but I think this should be an improvement on most CPUs.
I think all of this can go away if/when we switch to -x86-experimental-vector-widening-legalization
llvm-svn: 350134
Create PMULDQ/PMULUDQ as long as the number of elements is a power of 2.
This seems to give some improvements in our ability to use SimplifyDemandedBits.
llvm-svn: 350084
Make each of the helper functions only return their comparison node and the condition code. Leave X86ISD::SETCC creation to the LowerSETCC function itself.
Looking into whether we can use this code directly in BRCOND and SELECT lowering instead of going through LowerSETCC which creates an X86ISD::SETCC node we need to look through.
llvm-svn: 350082
Only one of the 3 callers of LowerAndToBT need the SETCC node. Two of them have to look through it to find the operands they really need. Instead create it after the one call that needs it.
LowerAndToBT now returns both the BT node and the X86 specific condition code separately.
llvm-svn: 350081
This is an alternative to what I attempted in D56057.
GetDemandedBits is a special version of SimplifyDemandedBits that allows simplifications even when the operand has other uses. GetDemandedBits will only do simplifications that allow a node to be bypassed. It won't create new nodes or alter any of the other users.
I had to add support for bypassing SIGN_EXTEND_INREG to GetDemandedBits.
Based on a patch that Simon Pilgrim sent me in email.
Fixes PR40142.
llvm-svn: 350059
Remove the TESTmr isel patterns and add another postprocessing combine for TESTrr+ANDrm->TESTmr. We already have a postprocessing combine for TESTrr+ANDrr->TESTrr. With this we can give ANDN a chance to match first. And clean it up during post processing if we ended up with just a regular AND.
This is another step towards my plan to gut EmitTest and do more flag handling during isel matching or by using optimizeCompare.
llvm-svn: 350038
The missed load folding noticed in D55898 is visible independent of that change
either with an adjusted IR pattern to start or with AVX2/AVX512 (where the build
vector becomes a broadcast first; movddup is not produced until we get into isel
via tablegen patterns).
Differential Revision: https://reviews.llvm.org/D55936
llvm-svn: 350005
Summary:
Added a pair of APIs for encoding/decoding the 3 components of a DWARF discriminator described in http://lists.llvm.org/pipermail/llvm-dev/2016-October/106532.html: the base discriminator, the duplication factor (useful in profile-guided optimization) and the copy index (used to identify copies of code in cases like loop unrolling)
The encoding packs 3 unsigned values in 32 bits. This CL addresses 2 issues:
- communicates overflow back to the user
- supports encoding all 3 components together. Current APIs assume a sequencing of events. For example, creating a new discriminator based on an existing one by changing the base discriminator was not supported.
Reviewers: davidxl, danielcdh, wmi, dblaikie
Reviewed By: dblaikie
Subscribers: zzheng, dmgreen, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D55681
llvm-svn: 349973
This fixes the patterns that have or/and as a root. 'and' is handled differently since thy usually have a CMP wrapped around them.
I had to look for uses of the CF flag because all these nodes have non-standard CF flag behavior. A real or/xor would always clear CF. In practice we shouldn't be using the CF flag from these nodes as far as I know.
Differential Revision: https://reviews.llvm.org/D55813
llvm-svn: 349962
The BEXTR instruction documents the SF bit as undefined.
The TBM BEXTR instruction has the same issue, but I'm not sure how to test it. With the control being an immediate we can determine the sign bit is 0 or the BEXTR would have been removed.
Fixes PR40060
Differential Revision: https://reviews.llvm.org/D55807
llvm-svn: 349956
This is admittedly a narrow fix for the problem:
https://bugs.llvm.org/show_bug.cgi?id=37502
...but as the XOP restriction shows, it's a maze to get this right.
In the motivating example, note that we have movddup before SSE4.1 and
again with AVX2. That's because insertps isn't available pre-SSE41 and
vbroadcast is (more generally) available with AVX2 (and the splat is
reduced to movddup via isel pattern).
Differential Revision: https://reviews.llvm.org/D55898
llvm-svn: 349937
This shortens the switches in X86ISelDAGToDAG.cpp to only need to check condition code instead of a list of opcodes.
This also fixes a bug where the memory forms of SETcc were missing from hasNoCarryFlagUses.
llvm-svn: 349868
Summary:
This allows expanding {7,11,13,14,15,21,22,23,25,26,27,28,29,30,31}-byte memcmp
in just two loads on X86. These were previously calling memcmp.
Reviewers: spatel, gchatelet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55263
llvm-svn: 349731
The (cmp (and X, Y) 0) pattern is greedy and ends up forming a TESTrr and consuming the and when it might be better to use one of the BMI/TBM like BLSR or BLSI.
This patch moves removes the pattern from isel and adds a post processing check to combine TESTrr+ANDrr into just a TESTrr. With this patch we are able to select the BMI/TBM instructions, but we'll also emit a TESTrr when the result is compared to 0. In many cases the peephole pass will be able to use optimizeCompareInstr to remove the TEST, but its probably not perfect.
Differential Revision: https://reviews.llvm.org/D55870
llvm-svn: 349661
Fixes https://bugs.llvm.org/show_bug.cgi?id=38743
The function removeRedundantBlockingStores is supposed to remove any blocking stores contained in each other in lockingStoresDispSizeMap.
But it currently looks only at the previous one, which will miss some cases that result in assert.
This patch refine the function to check all previous layouts until find the uncontained one. So all redundant stores will be removed.
Patch by Pengfei Wang
Differential Revision: https://reviews.llvm.org/D55642
llvm-svn: 349660
We already had BSF here as part of __builtin_ffs improvements and I was just wondering yesterday whether we should have BSR there.
This addresses one issue from PR40090.
llvm-svn: 349531
Migrate the X86 backend from X86ISD opcodes ADDS and SUBS to generic
ISD opcodes SADDSAT and SSUBSAT. This also improves scodegen for
@llvm.sadd.sat() and @llvm.ssub.sat() intrinsics.
This is a followup to D55787 and part of PR40056.
Differential Revision: https://reviews.llvm.org/D55833
llvm-svn: 349520
InstCombine seems to canonicalize or PSUB patter into a max with the cosntant and an add with an inverse of the constant.
This patch recognizes this pattern and turns it into PSUBUS. Future work could improve undef element handling.
Fixes some of PR40053
Differential Revision: https://reviews.llvm.org/D55780
llvm-svn: 349519
Replace the X86ISD opcodes ADDUS and SUBUS with generic ISD opcodes
UADDSAT and USUBSAT. As a side-effect, this also makes codegen for
the @llvm.uadd.sat and @llvm.usub.sat intrinsics reasonable.
This only replaces use in the X86 backend, and does not move any of
the ADDUS/SUBUS X86 specific combines into generic codegen.
Differential Revision: https://reviews.llvm.org/D55787
llvm-svn: 349481
(VSRAI (VSHLI X, C1), C1) --> X iff NumSignBits(X) > C1
This works better as part of SimplifyDemandedBits than part of the general combine.
llvm-svn: 349462
This fold was incredibly specific - replace with a SimplifyDemandedBits fold to remove a VSRAI if only the original sign bit is demanded (its guaranteed to stay the same).
Test change is merely a rescheduling.
llvm-svn: 349459
Convert VSRAI to VSRLI is the sign bit is known zero and improve KnownBits output for all shift instruction.
Fixes the poor codegen comments in D55768.
llvm-svn: 349407
This allows a TEST to be used and can be combined with any AND that may already exist as an input to the shift.
This was already done in EmitTest, but was easily tricked by multiple uses because the setcc might be used by multiple instructions. Once the SETCC and users are legalized then we can look for the shift to be used by a single CMP, but the CMP itself can have multiple users.
This appears to fix the case in PR39968.
llvm-svn: 349385
This is an initial patch to add the necessary support for a DemandedElts argument to SimplifyDemandedBits, more closely matching computeKnownBits and to help improve vector codegen.
I've added only a small amount of the changes necessary to get at least one test to update - a lot more can be done but I'd like to add these methodically with proper test coverage, at the same time the hope is to slowly move some/all of SimplifyDemandedVectorElts into SimplifyDemandedBits as well.
Differential Revision: https://reviews.llvm.org/D55768
llvm-svn: 349374
We keep a few iterators into the basic block we're selecting while
performing FastISel. Usually this is fine, but occasionally code wants
to remove already-emitted instructions. When this happens we have to be
careful to update those iterators so they're not pointint at dangling
memory.
llvm-svn: 349365
I'd like to try to move a lot of the flag matching out of EmitTest and push it to isel or isel preprocessing. This is a step towards that.
The test-shrink-bug.ll changie is an improvement because we are no longer interfering with test shrink handling in isel.
The pr34137.ll change is a regression, but the IR came from -O0 and was not reduced by InstCombine. So it contains a lot of redundancies like duplicate loads that made it combine poorly.
llvm-svn: 349315
Use consistent rules for when to lower to SHLD/SHRD for slow machines - fixes a weird issue where funnel shift gets expanded but then X86ISelLowering's combineOr sees the optsize and combines to SHLD/SHRD, but now with the modulo amount guard......
llvm-svn: 349285
The only caller of this turns CMP with 0 into TEST. CMP with 0 and TEST both set OF to 0 so we should have no issues with instructions that only use OF.
Though I don't think there's any reason we would read just OF after a compare with 0 anyway. So this probably isn't an observable change.
llvm-svn: 349223
hasNoCarryFlagUses hardcoded that the flag result is 1 and used that to filter which uses were of interest. hasNoSignedComparisonUses just assumes the only result is flags and checks whether any user of the node is a CopyToReg instruction.
After this patch we now do a result number check in both and rely on the caller to provide the result number.
This shouldn't change behavior it was just an odd difference between the two functions that I noticed.
llvm-svn: 349222
Summary:
If the setcc already has the target desired type we can reach the getSetCC/getSExtOrTrunc after the MatchingVecType check with the exact same types as the nodes we started with. This causes those causes VsetCC to be CSEd to N0 and the getSExtOrTrunc will CSE to N. When we return N, the caller will think that meant we called CombineTo and did our own worklist management. But that's not what happened. This prevents target hooks from being called for the node.
To fix this, I've now returned SDValue if the setcc is already the desired type. But to avoid some regressions in X86 I've had to disable one of the target combines that wasn't being reached before in the case of a (sext (setcc)). If we get vector widening legalization enabled that entire function will be deleted anyway so hopefully this is only for the short term.
Reviewers: RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55459
llvm-svn: 349137
This requires the two callers to manifest a 0 to make EmitCmp call EmitTest.
I'm looking into changing how we combine TEST and flag setting instructions to not be part of lowering. And instead be part of DAG combine or isel. Which will mean EmitTest will probably become gutted and maybe disappear entirely.
llvm-svn: 349094
Summary:
Macros are expanded on a single line. In case of large expansions,
with sufficiently many instructions with memory operands (and when
-fdebug-info-for-profiling is requested), we may be unable to generate
new base discriminator values - new values overflow (base
discriminators may not be larger than 2^12).
This CL warns instead of asserting in such a case. A subsequent CL
will add APIs to check for overflow before creating new debug info.
See https://bugs.llvm.org/show_bug.cgi?id=39890
Reviewers: davidxl, wmi, gbedwell
Reviewed By: davidxl
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D55643
llvm-svn: 349075
There's still a couple of minor SimplifyDemandedElts regressions in some of the shift amount splats that will be fixed in future patches.
llvm-svn: 349052
Move existing rotation expansion code into TargetLowering and set it up for vectors as well.
Ideally this would share more of the funnel shift expansion, but we handle the shift amount modulo quite differently at the moment.
Begun removing x86 vector rotate custom lowering to use the expansion.
llvm-svn: 349025
MULX has somewhat improved register allocation constraints compared to the legacy MUL instruction. Both output registers are encoded instead of fixed to EAX/EDX, but EDX is used as input. It also doesn't touch flags. Unfortunately, the encoding is longer.
Prefering it whenever BMI2 is enabled is probably not optimal. Choosing it should somehow be a function of register allocation constraints like converting adds to three address. gcc and icc definitely don't pick MULX by default. Not sure what if any rules they have for using it.
Differential Revision: https://reviews.llvm.org/D55565
llvm-svn: 348975
I'm hoping we can just replace SETCC_CARRY with SBB. This is another step towards that.
I've explicitly used zero as the input to the setcc to avoid a false dependency that we've had with the SETCC_CARRY. I changed one of the patterns that used NEG to instead use an explicit compare with 0 on the LHS. We needed the zero anyway to avoid the false dependency. The negate would clobber its input register. By using a CMP we can avoid that which could be useful.
Differential Revision: https://reviews.llvm.org/D55414
llvm-svn: 348959
This patch introduces a generic function to determine whether a given vector type is known to be a splat value for the specified demanded elements, recursing up the DAG looking for BUILD_VECTOR or VECTOR_SHUFFLE splat patterns.
It also keeps track of the elements that are known to be UNDEF - it returns true if all the demanded elements are UNDEF (as this may be useful under some circumstances), so this needs to be handled by the caller.
A wrapper variant is also provided that doesn't take the DemandedElts or UndefElts arguments for cases where we just want to know if the SDValue is a splat or not (with/without UNDEFS).
I had hoped to completely remove the X86 local version of this function, but I'm seeing some regressions in shift/rotate codegen that will take a little longer to fix and I hope to get this in sooner so I can continue work on PR38243 which needs more capable splat detection.
Differential Revision: https://reviews.llvm.org/D55426
llvm-svn: 348953
This extends the code that handles 16-bit add promotion to form LEA to also allow 8-bit adds.
That allows us to combine add ops with register moves and save some instructions. This is
another step towards allowing add truncation in generic DAGCombiner (see D54640).
Differential Revision: https://reviews.llvm.org/D55494
llvm-svn: 348946
Summary:
When doing X86CondBrFolding::analyzeCompare, it will meet the SUB32ri instruction as below to use the global address for its operand,
%733:gr32 = SUB32ri %62:gr32(tied-def 0), @img2buf_normal, implicit-def $eflags
JNE_1 %bb.41, implicit $eflags
so the assertion "assert(MI.getOperand(ValueIndex).isImm() && "Expecting Imm operand")" is not correct and change the assert to if make X86CondBrFolding::analyzeCompare return false as not finding the compare for this
Patch by Jianping Chen
Reviewers: smaslov, LuoYuanke, liutianle, Jianping
Reviewed By: Jianping
Subscribers: lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D54250
llvm-svn: 348853
As discussed in D55494, we want to extend this to handle 8-bit
ops too, but that could be extended further to enable this on
32-bit systems too.
llvm-svn: 348851
As discussed in:
D55494
...this code has been disabled/dead for a long time (the code references
Athlon and Pentium 4), and there's almost no chance that it will be used
given the last decade of uarch evolution. Also, in SDAG we promote 16-bit
ops to 32-bit, so there's almost no way to test this code any more.
llvm-svn: 348845
This patch restricts the capability of G_MERGE_VALUES, and uses the new
G_BUILD_VECTOR and G_CONCAT_VECTORS opcodes instead in the appropriate places.
This patch also includes AArch64 support for selecting G_BUILD_VECTOR of <4 x s32>
and <2 x s64> vectors.
Differential Revisions: https://reviews.llvm.org/D53629
llvm-svn: 348788
This should really be generalized to allow increment and/or
we should replace it by using ISD::matchUnaryPredicate().
See D55515 for context.
llvm-svn: 348776
Fixes https://bugs.llvm.org/show_bug.cgi?id=39926.
The size of the first copy was computed as
std::abs(std::abs(LdDisp2) - std::abs(LdDisp1)), which results in
skipped bytes if the signs of LdDisp2 and LdDisp1 differ. As far as
I can see, this should just be LdDisp2 - LdDisp1. The case where
LdDisp1 > LdDisp2 is already handled in the code above, in which case
LdDisp2 is set to LdDisp1 and this subtraction will evaluate to
Size1 = 0, which is the correct value to skip an overlapping copy.
Differential Revision: https://reviews.llvm.org/D55485
llvm-svn: 348750
Both intrinsics do the exact same thing so we really only need one.
Earlier in the 8.0 cycle we changed the signature of this intrinsic without renaming it. But it looks difficult to get the autoupgrade code to allow me to merge the intrinsics and change the signature at the same time. So I've renamed the intrinsic slightly for the new merged intrinsic. I'm skipping autoupgrading from the previous new to 8.0 signature. I've also renamed the subborrow for consistency.
llvm-svn: 348737
Previously we had to take the carry in and add -1 to it to set the carry flag so we could use it with ADC/SBB. But if we know its 0 then we don't need to bother.
This should go a long way towards fixing PR24545.
llvm-svn: 348727
The dependency was added in r213995 in response to r213986 which did make
X86/Utils depend on IR, but r256680 later removed that dependency again.
llvm-svn: 348724
The existing code tries to handle an undef operand while transforming an add to an LEA,
but it's incomplete because we will crash on the i16 test with the debug output shown below.
It's better to just give up instead. Really, GlobalIsel should have folded these before we
could get into trouble.
# Machine code for function add_undef_i16: NoPHIs, TracksLiveness, Legalized, RegBankSelected, Selected
bb.0 (%ir-block.0):
liveins: $edi
%1:gr32 = COPY killed $edi
%0:gr16 = COPY %1.sub_16bit:gr32
%5:gr64_nosp = IMPLICIT_DEF
%5.sub_16bit:gr64_nosp = COPY %0:gr16
%6:gr64_nosp = IMPLICIT_DEF
%6.sub_16bit:gr64_nosp = COPY %2:gr16
%4:gr32 = LEA64_32r killed %5:gr64_nosp, 1, killed %6:gr64_nosp, 0, $noreg
%3:gr16 = COPY killed %4.sub_16bit:gr32
$ax = COPY killed %3:gr16
RET 0, implicit killed $ax
# End machine code for function add_undef_i16.
*** Bad machine code: Reading virtual register without a def ***
- function: add_undef_i16
- basic block: %bb.0 (0x7fe6cd83d940)
- instruction: %6.sub_16bit:gr64_nosp = COPY %2:gr16
- operand 1: %2:gr16
LLVM ERROR: Found 1 machine code errors.
Differential Revision: https://reviews.llvm.org/D54710
llvm-svn: 348722
Extension to rL348617, turns out llvm-exegesis doesn't need to match the perf counter name against a scheduler model resource name - so I've added a few more counters that I could find in the libpfm4 source code (and fix a typo in the knl/knm retired_uops counter - which uses 'all' instead of 'any').
llvm-svn: 348721
To make X86CondBrFoldingPass can be run with --run-pass option, this can test one wrong assertion on analyzeCompare function for SUB32ri when its operand is not imm
Patch by Jianping Chen
Differential Revision: https://reviews.llvm.org/D55412
llvm-svn: 348620
This patch attempts to improve pfm perf counter coverage for all the x86 CPUs that libpfm4 supports.
Intel/AMD CPU families tend to share names for cycle/uops counters so even if they don't have a scheduler model yet they can at least use the default values (checked against the libpfm4 source code).
The remaining CPUs (where their port/pipe resource counters are known) I've tried to add to the existing model mappings.
These are untested but don't represent a regression to current llvm-exegesis behaviour for these CPUs.
Differential Revision: https://reviews.llvm.org/D55432
llvm-svn: 348617
Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.
Differential Revision: https://reviews.llvm.org/D50141
llvm-svn: 348585
This addresses a FIXME and avoids depending on an isel pattern match I think. I've remove the isel patterns too since he have no lit tests left that cover them. Hopefully that really means they are unused.
I'm trying to decide if we need SETCC_CARRY. This removes one of its usages.
Differential Revision: https://reviews.llvm.org/D55355
llvm-svn: 348536
Initial step towards making the function more generic (and probably move into SelectionDAG).
This is necessary to avoid massive codegen bloat for PR38243 (Add modulo rotate support to LowerRotate).
llvm-svn: 348498
Whenever we effectively take the address of a basic block we need to
manually update that basic block to reflect that fact or later passes
such as tail duplication and tail merging can break the invariants of
the code. =/ Sadly, there doesn't appear to be any good way of
automating this or even writing a reasonable assert to catch it early.
The change seems trivially and obviously correct, but sadly the only
really good test case I have is 1000s of basic blocks. I've tried
directly writing a test case that happens to make tail duplication do
something that crashes later on, but this appears to require an
*amazingly* complex set of conditions that I've not yet reproduced.
The change is technically covered by the tests because we mark the
blocks as having their address taken, but that doesn't really count as
properly testing the functionality.
llvm-svn: 348374
Prep work for PR38243 - mainly adding comments on where we need to add modulo support (doing so at the moment causes massive codegen regressions).
I've also consistently added support for modulo folding for uniform constants (although at the moment we have no way to trigger this) and removed the old assertions.
llvm-svn: 348366
This is an initial patch to add a minimum level of support for funnel shifts to the SelectionDAG and to begin wiring it up to the X86 SHLD/SHRD instructions.
Some partial legalization code has been added to handle the case for 'SlowSHLD' where we want to expand instead and I've added a few DAG combines so we don't get regressions from the existing DAG builder expansion code.
Differential Revision: https://reviews.llvm.org/D54698
llvm-svn: 348353
PR17686 demonstrates that for some targets FP exceptions can fire in cases where the FP_TO_UINT is expanded using a FP_TO_SINT instruction.
The existing code converts both the inrange and outofrange cases using FP_TO_SINT and then selects the result, this patch changes this for 'strict' cases to pre-select the FP_TO_SINT input and the offset adjustment.
The X87 cases don't need the strict flag but generates much nicer code with it....
Differential Revision: https://reviews.llvm.org/D53794
llvm-svn: 348251
We only needed this because it provided really aggressive constant folding even through constant pool entries created from build_vectors. The main case was for vXi8 MULH legalization which was happening as part of legalize DAG instead of as part of legalize vector ops. Now its part of vector op legalization and we've added special handling for build vectors of all constants there. This has removed the need for this code on the list tests we have.
llvm-svn: 348237
This is the smallest vector enhancement I could find to D54640.
Here, we're allowing narrowing to only legal vector ops because we'll see
regressions without that. All of the test diffs are wins from what I can tell.
With AVX/AVX512, we can shrink ymm/zmm ops to xmm.
x86 vector multiplies are the problem case that we're avoiding due to the
patchwork ISA, and it's not clear to me if we can dance around those
regressions using TLI hooks or if we need preliminary patches to plug those
holes.
Differential Revision: https://reviews.llvm.org/D55126
llvm-svn: 348195
Summary:
We need to unpackl and unpackh the operands to use two vXi16 multiplies. Previously it looks like the low unpack would get constant folded at least in the 128-bit case after shuffle lowering turned the unpackl into ZERO_EXTEND_VECTOR_INREG and X86 custom DAG combined it. The same doesn't happen for the high half. So we'd load a constant and then shuffle it. But the low half would just be loaded and used by the multiply directly.
After this patch we now end up with a constant pool entry for the low and high unpacks separately with no shuffle operations.
This is a step towards removing custom constant folding for ZERO_EXTEND_VECTOR_INREG/SIGN_EXTEND_VECTOR_INREG in the X86 backend.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55165
llvm-svn: 348159
Summary:
Under -x86-experimental-vector-widening-legalization, fp_to_uint/fp_to_sint with a smaller than 128 bit vector type results are custom type legalized by promoting the result to a 128 bit vector by promoting the elements, inserting an assertzext/assertsext, then truncating back to original type. The truncate will be further legalizdd to a pack shuffle. In the case of a v8i8 result type, we'll end up with a v8i16 fp_to_sint. This will need to be further legalized during vector op legalization by promoting to v8i32 and then truncating again. Under avx2 this produces good code with two pack instructions, but Under avx512 this will result in a truncate instruction and a packuswb instruction. But we should be able to get away with a single truncate instruction.
The other option is to promote all the way to vXi32 result type during the first type legalization. But in some experimentation that seemed to require more work to produce good code for other configurations.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54836
llvm-svn: 348158
Previously this code generated its own extracts and build_vector. But we can use a simpler concat_vectors or scalar_to_vector operation and let type legalization do additional legalization of those operations.
llvm-svn: 348087
The generic legalizer will fall back to a stack spill that uses a truncating store. That store will get expanded into a shuffle and non-truncating store on pre-avx512 targets. Once that happens the stack store/load pair will be combined away leaving behind the shuffle and bitcasts. On avx512 targets the truncating store is legal so doesn't get folded away.
By custom legalizing it we can avoid this churn and maybe produce better code.
llvm-svn: 348085
Summary: With sse4.1 we use two zero_extend_vector_inreg and a pshufd to expand the v16i8 input into two v8i16 vectors for the multiply. That's 3 shuffles to extend one operand. The other operand is usually constant as this is mostly used by division by constant optimization. Pre sse4.1 we use a punpckhbw and a punpcklbw with a zero vector. That's two shuffles and an xor and a copy due to tied register constraints. That seems maybe better than the 3 shuffles. With AVX we avoid the copy so that's obviously better.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55138
llvm-svn: 348079
This reduces the number of shuffle operations that need to be done. The splitting strategy requires the shuffle unit for the extraction and the extension. With the unpack strategy the unpacks accomplish a splitting and extending in one operation.
llvm-svn: 348019
This does require a constant pool load instead of loading an immediate into a gpr, moving to a k register and masking. But its less instructions and more consistent with previous ISAs. It probably opens up more combine opportunities as one of the test cases demonstrates.
llvm-svn: 348018
Previously we emitted a punpcklbw/punpckhbw to move the byte elements into the upper half of 16 bit elements then shifted right by 8 to zero the upper bits. After DAG combine we end up with punpcklbw/punpckhbw into the lower bits with zeros in the uppers bits and no shifts. So just emit that directly.
llvm-svn: 347966
We had a EVT variable capturing the result of getSimpleValueType which returns an MVT. Another place using EVT that could have been MVT. And an 'int' that should be 'unsigned'.
llvm-svn: 347959
Summary:
Suppressed warnings in release builds due to variable used
only in assert statement.
Subscribers: llvm-commits, eraman, mgorny
Differential Revision: https://reviews.llvm.org/D55100
llvm-svn: 347939
I believe we should be legalizing these with the rest of vector binary operations. If any custom lowering is required for these nodes, this will give the DAG combine between LegalizeVectorOps and LegalizeDAG to run on the custom code before constant build_vectors are lowered in LegalizeDAG.
I've moved MULHU/MULHS handling in AArch64 from Lowering to isel. Moving the lowering earlier caused build_vector+extract_subvector simplifications to kick in which made the generated code worse.
Differential Revision: https://reviews.llvm.org/D54276
llvm-svn: 347902
This is another patch for -x86-experimental-vector-widening. This pre widens narrow division by constants so that we can get pass the legal type check in the generic DAG combiner. Otherwise we end up scalarizing.
I've restricted this to splats for now because it was easy to just call DAG.getConstant. Not sure what we should do for non-splat? Increase the element size?Widen the constant vector by padding with 1?
Differential Revision: https://reviews.llvm.org/D54919
llvm-svn: 347898
It causes asserts building BoringSSL. See https://crbug.com/91009#c3 for
repro.
This also reverts the follow-ups:
Revert r347724 "Do not insert prefetches with unsupported memory operands."
Revert r347606 "[X86] Add dependency from X86 to ProfileData after rL347596"
Revert r347607 "Add new passes to X86 pipeline tests"
llvm-svn: 347864
This patch adds the ability to specify via tablegen which processor resources
are load/store queue resources.
A new tablegen class named MemoryQueue can be optionally used to mark resources
that model load/store queues. Information about the load/store queue is
collected at 'CodeGenSchedule' stage, and analyzed by the 'SubtargetEmitter' to
initialize two new fields in struct MCExtraProcessorInfo named `LoadQueueID` and
`StoreQueueID`. Those two fields are identifiers for buffered resources used to
describe the load queue and the store queue.
Field `BufferSize` is interpreted as the number of entries in the queue, while
the number of units is a throughput indicator (i.e. number of available pickers
for loads/stores).
At construction time, LSUnit in llvm-mca checks for the presence of extra
processor information (i.e. MCExtraProcessorInfo) in the scheduling model. If
that information is available, and fields LoadQueueID and StoreQueueID are set
to a value different than zero (i.e. the invalid processor resource index), then
LSUnit initializes its LoadQueue/StoreQueue based on the BufferSize value
declared by the two processor resources.
With this patch, we more accurately track dynamic dispatch stalls caused by the
lack of LS tokens (i.e. load/store queue full). This is also shown by the
differences in two BdVer2 tests. Stalls that were previously classified as
generic SCHEDULER FULL stalls, are not correctly classified either as "load
queue full" or "store queue full".
About the differences in the -scheduler-stats view: those differences are
expected, because entries in the load/store queue are not released at
instruction issue stage. Instead, those are released at instruction executed
stage. This is the main reason why for the modified tests, the load/store
queues gets full before PdEx is full.
Differential Revision: https://reviews.llvm.org/D54957
llvm-svn: 347857
This failed to select (which might be a separate bug) in
X86ISelDAGToDAG because we try to create a select node
that can be simplified away after rL347227.
This change avoids the problem by simplifying the SHRUNKBLEND
node sooner. In the test case, we manage to realize that the
true/false values of the select (SHRUNKBLEND) are the same thing,
so it simplifies away completely.
llvm-svn: 347818
Unlike most cost model functions this code makes a lot of table lookups without using the results from getTypeLegalizationCost. This means 512-bit vectors can be looked up even when the type isn't legal.
This patch adds a check around the two tables that contain 512-bit types to make sure that neither of the types would be split by type legalization. Meaning 512 bit types are illegal. I wanted to write this in a somewhat generic way that uses type legalization query hooks. But if prefered, I can switch to just using is512BitVector and the subtarget feature.
Differential Revision: https://reviews.llvm.org/D54984
llvm-svn: 347786
This fixes some of scalarization costs reported for sext/zext using avx512bw. This does not fix all scalarization costs being reported. Just the worst.
I've restricted this only to combinations of types that are legal with avx512bw like v32i1/v64i1/v32i16/v64i8 and conversions between vXi1 and vXi8/vXi16 with legal vXi8/vXi16 result types.
Differential Revision: https://reviews.llvm.org/D54979
llvm-svn: 347785
Expansion of SIGN_EXTEND_INREG can create a VSRAI instruction. If there is already a VSRAI after it, we should combine them into a larger VSRAI
Differential Revision: https://reviews.llvm.org/D54959
llvm-svn: 347784
Currently, instructions doing memory accesses through a base operand that is
not a register can not be analyzed using `TII::getMemOpBaseRegImmOfs`.
This means that functions such as `TII::shouldClusterMemOps` will bail
out on instructions using an FI as a base instead of a register.
The goal of this patch is to refactor all this to return a base
operand instead of a base register.
Then in a separate patch, I will add FI support to the mem op clustering
in the MachineScheduler.
Differential Revision: https://reviews.llvm.org/D54846
llvm-svn: 347746
We're already mixing this APInt with other 'unsigned' variables. This allows us to use regular comparison operators instead of needing to use APInt::ult or APInt::uge. And it removes a later conversion from APInt to unsigned.
I might be adding another combine to this function and this will probably simplify the logic required for that.
llvm-svn: 347684
This is skylake-avx512 with the addition of avx512vnni ISA.
Patch by Jianping Chen
Differential Revision: https://reviews.llvm.org/D54785
llvm-svn: 347681
If we fold the bitcast into the store we'll end up creating a truncating store to vXi1 that will get scalarized. Instead allow the bitcast to be turned into a movmsk.
We probably need to do something if the store itself is a vXi1 type, but I'll leave that til a testcase appears.
llvm-svn: 347632
Summary:
Support for profile-driven cache prefetching (X86)
This change is part of a larger system, consisting of a cache prefetches recommender, create_llvm_prof (https://github.com/google/autofdo), and LLVM.
A proof of concept recommender is DynamoRIO's cache miss analyzer. It processes memory access traces obtained from a running binary and identifies patterns in cache misses. Based on them, it produces a csv file with recommendations. The expectation is that, by leveraging such recommendations, we can reduce the amount of clock cycles spent waiting for data from memory. A microbenchmark based on the DynamoRIO analyzer is available as a proof of concept: https://goo.gl/6TM2Xp.
The recommender makes prefetch recommendations in terms of:
* the binary offset of an instruction with a memory operand;
* a delta;
* and a type (nta, t0, t1, t2)
meaning: a prefetch of that type should be inserted right before the instrution at that binary offset, and the prefetch should be for an address delta away from the memory address the instruction will access.
For example:
0x400ab2,64,nta
and assuming the instruction at 0x400ab2 is:
movzbl (%rbx,%rdx,1),%edx
means that the recommender determined it would be beneficial for a prefetchnta instruction to be inserted right before this instruction, as such:
prefetchnta 0x40(%rbx,%rdx,1)
movzbl (%rbx, %rdx, 1), %edx
The workflow for prefetch cache instrumentation is as follows (the proof of concept script details these steps as well):
1. build binary, making sure -gmlt -fdebug-info-for-profiling is passed. The latter option will enable the X86DiscriminateMemOps pass, which ensures instructions with memory operands are uniquely identifiable (this causes ~2% size increase in total binary size due to the additional debug information).
2. collect memory traces, run analysis to obtain recommendations (see above-referenced DynamoRIO demo as a proof of concept).
3. use create_llvm_prof to convert recommendations to reference insertion locations in terms of debug info locations.
4. rebuild binary, using the exact same set of arguments used initially, to which -mllvm -prefetch-hints-file=<file> needs to be added, using the afdo file obtained at step 3.
Note that if sample profiling feedback-driven optimization is also desired, that happens before step 1 above. In this case, the sample profile afdo file that was used to produce the binary at step 1 must also be included in step 4.
The data needed by the compiler in order to identify prefetch insertion points is very similar to what is needed for sample profiles. For this reason, and given that the overall approach (memory tracing-based cache recommendation mechanisms) is under active development, we use the afdo format as a syntax for capturing this information. We avoid confusing semantics with sample profile afdo data by feeding the two types of information to the compiler through separate files and compiler flags. Should the approach prove successful, we can investigate improvements to this encoding mechanism.
Reviewers: davidxl, wmi, craig.topper
Reviewed By: davidxl, wmi, craig.topper
Subscribers: davide, danielcdh, mgorny, aprantl, eraman, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54052
llvm-svn: 347596
SplitVecOp_TruncateHelper tries to promote the result type while splitting FP_TO_SINT/UINT. It then concatenates the result and introduces a truncate to the original result type. But it does this without inserting the AssertZExt/AssertSExt that the regular result type promotion would insert. Nor does it turn FP_TO_UINT into FP_TO_SINT the way normal result type promotion for these operations does. This is bad on X86 which doesn't support FP_TO_SINT until AVX512.
This patch disables the use of SplitVecOp_TruncateHelper for these operations and just lets normal promotion handle it. I've tweaked a couple things in X86ISelLowering to avoid a few obvious regressions there. I believe all the changes on X86 are improvements. The other targets look neutral.
Differential Revision: https://reviews.llvm.org/D54906
llvm-svn: 347593
Summary:
Add a hook to the GCMetadataPrinter for emitting stack maps in
custom format. The hook will be called at stack map generation
time. The default stack map format is used if there is no hook.
For this to be useful a few data structures and accessors are
exposed from the StackMaps class, so the custom printer can
access the stack map data.
This patch authored by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, apilipenko, reames
Reviewed By: reames
Subscribers: reames, apilipenko, nemanjai, javed.absar, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53892
llvm-svn: 347584
We have these 2 "isDesirable" promotion hooks (I'm not sure why we need both of them, but that's
independent of this patch), and we can adjust them to promote "mul i8 X, C" to i32. Then, all of
our existing LEA and other multiply expansion magic happens as it would for i32 ops.
Some of the test diffs show that we could end up with an actual 32-bit mul instruction here
because we choose not to expand to simpler ops. That instruction could be slower depending on the
subtarget. On the plus side, this means we don't need a separate instruction to load the constant
operand and possibly an extra instruction to move the result. If we need to tune mul i32 further,
we could add a later transform that tries to shrink it back to i8 based on subtarget timing.
I did not bother to duplicate all of the 32-bit test file RUNs and target settings that exist to
test whether LEA expansion is cheap or not. The diffs here assume a default target, so that means
LEA is generally cheap.
Differential Revision: https://reviews.llvm.org/D54803
llvm-svn: 347557
This should likely be adjusted to limit this transform
further, but these diffs should be clear wins.
If we have blendv/conditional move, then we should assume
those are cheap ops. The loads become independent of the
compare, so those can be speculated before we need to use
the values in the blend/mov.
llvm-svn: 347526
These are AVX2 instructions, but have been incorrectly marked in tablegen for a while. This wasn't a problem until r346784 switched the patterns to use target independent ISD opcodes. This made the patterns visible to fast isel.
Fixes PR39733
llvm-svn: 347375
We can't guarantee that demanded bits passing through the vector shuffle won't cause the AND in front of this to be removed. This would prevent the PACKUS from being matched during shuffle lowering.
Unfortunately, this adds a packuswb to one of the vector-reduce-mul.ll tests since we were removing the shuffle via SimplifyDemandedVectorElts. We appear to have similar issues with vpmovwb on the same test case on other targets.
llvm-svn: 347361
Previously we emitted to separate shuffles, one for unpcklbw and one for unpcklwd. Instead emit a single shuffle equivalent to both of the original shuffles. Shuffle lowering seems able to handle it. This avoids a bitcast between the two shuffles which seems helpful to DAG combine.
Remove the custom type legalization for v8i8->v8i32. I had put that in to avoid some almost duplicate punpcklbw instructions I was seeing, but this lowering change seems to fix that. It also fixes some duplicate shuffles seen in vector-sext.ll
llvm-svn: 347348
Pull out getPackDemandedElts demanded elts remapping helper from computeKnownBitsForTargetNode and use in computeKnownBits/ComputeNumSignBits.
llvm-svn: 347303
Previously if V2 was unused we ended up using V1 for both inputs as part of the code that follows the new code. By using lowerVectorShuffleWithUNPCK we keep the undef nature of V2 in the output.
As near as I can tell this makes v16i8 behavior consistent with every other VT now.
This does mean that we give the register allocator freedom to fill in random registers now and create false dependencies. But like I said we're already doing that for other types.
llvm-svn: 347296
getZeroVector produces a specifically canonicalized zero vector, but we can just let DAG legalization take care of it.
The test changes are because MULH lowering happens later than it should and this change gave us the opportunity to constant fold away a multiply during a DAG combine before the build_vector got legalized with a bitcast.
llvm-svn: 347290
We're seeing some issues internally where we sent some intrinsics into the cost model that the getTypeLegalizationCost call fails on, but X86 specific tables don't care about. Our base class implementation takes care of them. We'd just like X86 backend to ignore them.
This patch makes sure the switch returned something X86 cares about and skips the table lookups and type legalization call if not. Probably more efficient too since we don't go scanning the tables for every intrinsic we could possibly see.
Differential Revision: https://reviews.llvm.org/D54711
llvm-svn: 347248
SSE PSHUFB vector ctlz lowering works at the i4 nibble level. As detailed in PR39703, we were masking the lower nibble off but we only actually use it in the case where the upper nibble is known to be zero, making it safe to remove the mask and save an instruction.
Differential Revision: https://reviews.llvm.org/D54707
llvm-svn: 347242
Previously we split the vectors in half to allow the two halves to be any extended then concatenated the results back together.
This patch instead instead extends the v16i8 sse algorithm to extend half of each 128-bit lane using punpcklbw/punpckhbw. Multiplies all the low half lanes and high half lanes together in separate operations. Then merges the half lane results back together using packuswb.
Unfortunately, some of the cases in vector-reduce-mul.ll regress because we aren't narrowing the vector width of the multiplies as we reduce. The splitting was somewhat making up for that before by causing halves to be discarded after the split.
Differential Revision: https://reviews.llvm.org/D54668
llvm-svn: 347240
The shift requires a copy to avoid clobbering a register. Comparing with 0 uses an xor to produce 0 that will be overwritten with the compare results. So still requires 2 instructions, but should be one byte shorter since it doesn't need to encode an immediate.
llvm-svn: 347185
Previously we used an arithmetic shift right by 31, but that requires a copy to preserve the input. So we might as well materialize a zero and compare to it since the comparison will overwrite the register that contains the zeros. This should be one byte shorter.
llvm-svn: 347181
Leave just the v4i8->v4i64 and v8i8->v8i64, but only enable them on pre-sse4.1 targets when 64-bit mode is enabled. In those cases we end up creating sext loads that get scalarized to code that looks better than what we get from loading into a vector register and doing a multiple step sign extend using unpacks and shifts.
llvm-svn: 347180
Pre-SSE4.1 sext_invec for v2i64 is complicated because we don't have a v2i64 sra instruction. So instead we sign extend to i32 using unpack and sra, then copy the elements and do a v4i32 sra to fill with sign bits, then interleave the i32 sign extend and the sign bits. So really we're doing to two sign extends but only using half of the v4i32 intermediate result.
When the result is more than 128 bits, default type legalization would prefer to split the destination type all the way down to v2i64 with shuffles followed by v16i8/v8i16->v2i64 sext_inreg operations. This results in more instructions than necessary because we are only utilizing the lower 2 elements of the v4i32 intermediate result. Instead we can custom split a v4i8/v4i16->v4i64 sign_extend. Then we can sign extend v4i8/v4i16->v4i32 invec producing a full v4i32 result. Create the sign bit vector as a v4i32 then split and interleave with the sign bits using an punpackldq and punpackhdq.
llvm-svn: 347176
If we widen illegal types instead of promoting, we should be able to rely on the type legalizer to create the vector_inreg operations for us with some caveats.
This patch disables combineToExtendVectorInReg when we are using widening.
I've enabled custom legalization for v8i8->v8i64 extends under avx512f since the type legalizer would want to create a vector_inreg with a v64i8 input type which isn't legal without avx512bw. So we go to v16i8 with custom code using the relaxation of rules we get from D54346.
I've also enable custom legalization of v8i64 and v16i32 operations with with AVX. When the input type is 128 bits, the default splitting legalization would extend first 128->256, then do the a split to two 128 pieces. Extend each half to 256 and then concat the result. The custom legalization I've added instead uses a 128->256 bit vector_inreg extend that only reads the lower 64-bits for the low half of the split. Then shuffles the high 64-bits to the low 64-bits and does another vector_inreg extend.
llvm-svn: 347172
Summary: This is an improvement over the two pshufbs and punpcklqdq we'd get otherwise.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54671
llvm-svn: 347171
Refactor towards making this recursive (necessary for PR38243 rotation splat detection).
IsSplatVector returns the original vector source of the splat and the splat index.
GetSplatValue returns the scalar splatted value as an extraction from IsSplatVector.
llvm-svn: 347168
We were using the 'normalized' shuffle mask from resolveTargetShuffleInputs, which replaces zero/undef inputs with sentinel values. For SimplifyDemandedVectorElts we need the raw mask so we can correctly demand those 'zero' inputs that got normalized away, this requires an extra bit of logic to locally normalize undef inputs.
llvm-svn: 347158
The zero extend will require two stages of unpacks to implement. So its better to shrink the multiply using pmullw and then extend that result back to v4i32 using a single unpack.
llvm-svn: 347149
This tries to force the result type to vXi32 followed by a truncate. This can help avoid scalarization that would otherwise occur.
There's some annoying examples of an avx512 truncate instruction followed by a packus where we should really be able to just use one truncate. But overall this is still a net improvement.
llvm-svn: 347105
Summary:
As discussed in previous review, and noted in the FIXME, if `X` is actually an `lshr Y, Z` (logical!),
we can fold the `Z` into 'control`, and let the `BEXTR` do this too.
We could just insert those 8 bits of shift amount into control,
but it is better to instead zero-extend them, and 'or' them in place.
We can only do this for `lshr`, not `ashr`, because we do not know that the mask cover only the bits of `Y`,
and not any of the sign-extended bits.
The obvious question is, is this actually legal to do?
I believe it is. Relevant quotes, from `Intel® 64 and IA-32 Architectures Software Developer’s Manual`, `BEXTR — Bit Field Extract`:
* `Bit 7:0 of the second source operand specifies the starting bit position of bit extraction.`
* `A START value exceeding the operand size will not extract any bits from the second source operand.`
* `Only bit positions up to (OperandSize -1) of the first source operand are extracted.`
* `All higher order bits in the destination operand (starting at bit position LENGTH) are zeroed.`
* `The destination register is cleared if no bits are extracted.`
FIXME: if we can do this, i wonder if we should prefer `BEXTR` over `BZHI` in such cases.
Reviewers: RKSimon, craig.topper, spatel, andreadb
Reviewed By: RKSimon, craig.topper, andreadb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54095
llvm-svn: 347048
By early promoting the multiply to use an i16 element type we can avoid op legalization emit a second multiply for the 8 upper elements of the v16i8 type we would otherwise get.
llvm-svn: 347032
We aren't going to use the upper bits of the multiply result that the extend would effect. So we don't need a specific type of extend.
This makes some reduction test cases shorter because we were previously trying to sign_extend a truncate which we can't eliminate.
llvm-svn: 347011
Removing this code doesn't affect any lit tests so it doesn't appear to be tested anymore. I assume it was when it was added, but I guess something else changed? Code coverage report also says its unused.
I mostly didn't like that it seemed to count the sign bits as if it was a sign_extend, but then set isPositive as if it was a zero_extend. It feels like we should have picked one interpretation?
Differential Revision: https://reviews.llvm.org/D54596
llvm-svn: 346995
Use unsigned to calculate the subvector index to avoid a cast.
Remove an unnecessary condition and replace it with a stronger assert.
Use the InVT variable we updated when we extracted instead of grabbing it from the In SDValue.
llvm-svn: 346983
In reduceVMULWidth, we no longer need to worry about extending the vector to 128 bits first. Regular widening of extends, muls and shuffles will take care of that for us.
In combineMulToPMADDWD, we can handle v2i32 multiplies and allow the VPMADDWD to be widened to v4i32 during type legalization by adding custom widening like we do have for AVG/ADDUS/SUBUS. I had to modify that code a little to allow different and output VTs.
Differential Revision: https://reviews.llvm.org/D54512
llvm-svn: 346980
This fixes -filetype=null support when compiling for a Win32 target and the module has a CodeView flag.
The only places changed are the uses of getTargetStreamer function - this patch guards both of them with null checks.
Committed on behalf of @eush (Eugene Sharygin)
Differential Revision: https://reviews.llvm.org/D54008
llvm-svn: 346962
This avoids some nasty shuffles when we have avx512. It will also prevent using zmm truncate instructions when a ymm instruction that zeroes part of an xmm register will do. Also avoid using avx512 truncate instructions when the input is 128 bits or less. These instructions are 2 uops on skx so we can probably find a better single uop shuffle like pshufb.
llvm-svn: 346936
The narrow types end up requesting widening, but generic legalization will end up scalaring and using a build_vector to do the widening.
llvm-svn: 346916
On 64-bit targets the type legalizer will use i64 to legalize these. But when i64 isn't legal, the type legalizer won't try an FP type. So do it manually instead.
There are a few regressions in here due to some v2i32 operations like mul and div now being reassembled into a full vector just to store instead of storing the pieces. But this was already occuring in 64-bit mode so its not a new issue.
llvm-svn: 346908
The machine scheduler currently biases register copies to/from
physical registers to be closer to their point of use / def to
minimize their live ranges. This change extends this to also physical
register assignments from immediate values.
This causes a reduction in reduction in overall register pressure and
minor reduction in spills and indirectly fixes an out-of-registers
assertion (PR39391).
Most test changes are from minor instruction reorderings and register
name selection changes and direct consequences of that.
Reviewers: MatzeB, qcolombet, myatsina, pcc
Subscribers: nemanjai, jvesely, nhaehnle, eraman, hiraditya,
javed.absar, arphaman, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54218
llvm-svn: 346894
Narrower vectors will be widened to 128 bits without changing the element size. And generic type legalization can already handle widening mulhu/mulhs.
Differential Revision: https://reviews.llvm.org/D54513
llvm-svn: 346879
Add support for the expansion of funnelshift/rotates to getIntrinsicInstrCost.
This also required us to move the X86 fshl/fshr costs to the same place as the rotates to avoid expansion and get correct scalarization vs vectorization costs.
llvm-svn: 346854
This patch removes the last use of the constant pool shuffle decode helper and consistently uses the 'getTargetShuffleMaskIndices' versions instead. The constant pool versions are now purely used for assembly comments.
The avx512vbmi intrinsic upgrades had to be altered as they were being decoded as broadcasts, similar to what I fixed in rL346032. I don't think the change is critical - although its annoying that we lose the {k}{z} instruction test coverage as they are tricky to generate....
Differential Revision: https://reviews.llvm.org/D54083
llvm-svn: 346850
Previously, the extend_vector_inreg opcode required their input register to be the same total width as their output. But this doesn't match up with how the X86 instructions are defined. For X86 the input just needs to be a legal type with at least enough elements to cover the output.
This patch weakens the check on these nodes and allows them to be used as long as they have more input elements than output elements. I haven't changed type legalization behavior so it will still create them with matching input and output sizes.
X86 will custom legalize these nodes by shrinking the input to be a 128 bit vector and once we've done that we treat them as legal operations. We still have one case during type legalization where we must custom handle v64i8 on avx512f targets without avx512bw where v64i8 isn't a legal type. In this case we will custom type legalize to a *extend_vector_inreg with a v16i8 input. After that the input is a legal type so type legalization should ignore the node and doesn't need to know about the relaxed restriction. We are no longer allowed to use the default expansion for these nodes during vector op legalization since the default expansion uses a shuffle which required the widths to match. Custom legalization for all types will prevent us from reaching the default expansion code.
I believe DAG combine works correctly with the released restriction because it doesn't check the number of input elements.
The rest of the patch is changing X86 to use either the vector_inreg nodes or the regular zero_extend/sign_extend nodes. I had to add additional isel patterns to handle any_extend during isel since simplifydemandedbits can create them at any time so we can't legalize to zero_extend before isel. We don't yet create any_extend_vector_inreg in simplifydemandedbits.
Differential Revision: https://reviews.llvm.org/D54346
llvm-svn: 346784
This patch adds the ability to use a PALIGNR to rotate a pair of inputs to select a range containing all the referenced elements, followed by a single input permute to put them in the right location.
Differential Revision: https://reviews.llvm.org/D54267
llvm-svn: 346706
Truncate and shuffle lowering are already capable of matching to PACKUS using known bits analysis.
This features one test change where we now prefer to extend v16i16->v16i32 then trunc v16i32->v16i8 over extract_subvector+packus when avx512f is available, but avx512bw is not.
llvm-svn: 346697
When we repeat the 2 shifting operands then this is a bit rotation - annoyingly this has to be done in the other getIntrinsicInstrCost than most intrinsics as we need to check the operands are the same.
llvm-svn: 346688
getConstant will create a BUILD_VECTOR for us and use a legal type if necessary. So just create the simple node and let BUILD_VECTOR legalization do the canonicalization.
llvm-svn: 346603
There are two AGU units, and per 1cy, there can be either two loads,
or a load and a store; but not two stores, or two loads and a store.
Additionally, loads shouldn't affect the store scheduler and vice versa.
(but *should* affect the PdEX scheduler.)
Required rL346545.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39465
llvm-svn: 346587
The sdivrem will emit its own MOVSX to move %ah to the low byte of a register. By using a MOVSX for an any_extend this allows a post-isel peephole to merge them.
llvm-svn: 346581
This gives shuffle lowering the freedom to use zero_extend_vector_inreg for the unpckl shuffle. Shuffle combining usually makes this swap later, but not when AVX512 is enabled it seems.
While there also use DAG.getConstant to create a 0 vector instead of using the helper the forces a specific BUILD_VECTOR. I don't think that helper is usually needed. We're basically free to create a constant build_vector anytime and it will be legalized on its own.
llvm-svn: 346574
With avx512f but not avx512bw we need to extend to v16i32 then truncate that to to v16i8. Previously we emitted both nodes during lowering, but I'm trying to switch to using target independent nodes and with that switched the extend+truncate wou
This patch changes the implementation to what will be necessary with that patch which helps minimize test diffs.
llvm-svn: 346552
This makes X86ISD::VSEXT more similar to ISD::SIGN_EXTEND and ISD::ZERO_EXTEND.
I'm hoping to replace X86ISD::VSEXT/VZEXT with target independent nodes. Making the target specific nodes similar to the target independent nodes helps minimize test diffs in that patch.
llvm-svn: 346539
I noticed that we weren't generating broadcasts as much I thought we would with
D54271, and this is part of the problem.
Widening the shuffle elements means adding bitcasts and hiding the relationship
between a splatted scalar and the vector. If we can form a broadcast, do that
before going through the rest of the shuffle lowering because broadcasts should
be cheap and can often be load-folded.
Differential Revision: https://reviews.llvm.org/D54280
llvm-svn: 346498
Summary:
This simplifies the code and moves everything to tablegen for consistency. This
also prepares the ground for adding issue counters.
Reviewers: gchatelet, john.brawn, jsji
Subscribers: nemanjai, mgorny, javed.absar, kbarton, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54297
llvm-svn: 346489
As discussed in D54073, we have a potential regression from more aggressive vector narrowing here, so let's try to avoid that by changing build-vector lowering slightly.
Insert-vector-element lowering always does this since there's no "pinsr" for ymm/zmm:
// If the vector is wider than 128 bits, extract the 128-bit subvector, insert
// into that, and then insert the subvector back into the result.
...but we can sometimes do better for insert-into-constant-vector by using shuffle lowering.
Differential Revision: https://reviews.llvm.org/D54271
llvm-svn: 346433
Summary:
The conditional branch created to support -fsplit-stack for X86 is
left unbiased/unhinted, resulting in less than ideal block placement:
the __morestack call block is kept on the main hot path. Bias the
branch to insure that the stack allocation block is treated as a
"cold" block during machine basic block placement.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54123
llvm-svn: 346336
Change the type in a couple of lists and sets that only store physical
registers from unsigned to MCPhysRegs. The later is only 16bits and
saves us a bit of memory.
llvm-svn: 346254
The main caller of this already has an MVT and several targets called getSimpleVT inside without checking isSimple. This makes the simpleness explicit.
llvm-svn: 346180
SimplifyDemandedBits can turn a sign_extend back into an any_extend and trigger an infinite loop. So instead legalize it the same way as a sign_extend, but preserve the opcode. Then just pattern match it the same as sign_extend during isel.
I don't have a reduced test case for such an infinite loop yet.
llvm-svn: 346170
v2i8/v2i16/v2i32 are promoted to v2i64. pmuludq takes a v2i64 input and produces a v2i64 output. Since we don't about the upper bits of the type legalized multiply we can use the pmuludq to produce the multiply result for the bits we do care about.
llvm-svn: 346115
Summary: This also enables some constant folding from KnownBits propagation. This helps on some cases vXi64 case in 32-bit mode where constant vectors appear as vXi32 and a bitcast. This can prevent getNode from constant folding sra/shl/srl.
Reviewers: RKSimon, spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54069
llvm-svn: 346102
These methods were just wrappers around getNode with additional asserts (identical and repeated 3 times). But getNode already has a switch that can be used to hold these asserts that allows them to be shared for all 3 opcodes. This also enables checking on the places that create these nodes without using the wrappers.
The rest of the patch is just changing all callers to use getNode directly.
llvm-svn: 346087
Use MachineFrameInfo's OffsetAdjustment field to pass this information
from the target to CodeViewDebug.cpp. The X86 backend doesn't use it for
any other purpose.
This fixes PR38857 in the case where there is a non-aligned quantity of
CSRs and a non-aligned quantity of locals.
llvm-svn: 346062
The majority of the changes are because the rest of shuffle lowering/combining prefers to replace the undef input with the other operand. Using UNPCKL directly seemed to avoid this and just grabbed a randomish register for the undef which can create false dependencies.
llvm-svn: 346050
We already have custom lowering for the AVX case in LegalizeVectorOps. So its better to keep the regular extend op around as long as possible.
I had to qualify one place in DAG combine that created illegal vector extending load operations. This change by itself had no effect on any tests which is why its included here.
I've made a few cleanups to the custom lowering. The sign extend code no longer creates an identity shuffle with undef elements. The zero extend code now emits a zero_extend_vector_inreg instead of an unpckl with a zero vector.
For the high half of the custom lowering of zero_extend/any_extend, we're now using an unpckh with a zero vector or undef. Previously we used used a pshufd to move the upper 64-bits to the lower 64-bits and then used a zero_extend_vector_inreg. I think the zero vector should require less execution resources and be smaller code size.
Differential Revision: https://reviews.llvm.org/D54024
llvm-svn: 346043
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
This patch adds support for expanding vector CTPOP instructions and removes the x86 'bitmath' lowering which replicates the same expansion.
Differential Revision: https://reviews.llvm.org/D53258
llvm-svn: 345869
Reapplying an updated version of rL345395 (reverted in rL345451), now the issues noticed in PR39483 have been fixed.
This patch allows resolveTargetShuffleInputs to remove UNDEF inputs from cases where we have more than 2 inputs.
llvm-svn: 345824
Before this patch, class PredicateExpander only knew how to expand simple
predicates that performed checks on instruction operands.
In particular, the new scheduling predicate syntax was not rich enough to
express checks like this one:
Foo(MI->getOperand(0).getImm()) == ExpectedVal;
Here, the immediate operand value at index zero is passed in input to function
Foo, and ExpectedVal is compared against the value returned by function Foo.
While this predicate pattern doesn't show up in any X86 model, it shows up in
other upstream targets. So, being able to support those predicates is
fundamental if we want to be able to modernize all the scheduling models
upstream.
With this patch, we allow users to specify if a register/immediate operand value
needs to be passed in input to a function as part of the predicate check. Now,
register/immediate operand checks all derive from base class CheckOperandBase.
This patch also changes where TIIPredicate definitions are expanded by the
instructon info emitter. Before, definitions were expanded in class
XXXGenInstrInfo (where XXX is a target name).
With the introduction of this new syntax, we may want to have TIIPredicates
expanded directly in XXXInstrInfo. That is because functions used by the new
operand predicates may only exist in the derived class (i.e. XXXInstrInfo).
This patch is a non functional change for the existing scheduling models.
In future, we will be able to use this richer syntax to better describe complex
scheduling predicates, and expose them to llvm-mca.
Differential Revision: https://reviews.llvm.org/D53880
llvm-svn: 345714
optsize using masked wide loads
Under Opt for Size, the vectorizer does not vectorize interleave-groups that
have gaps at the end of the group (such as a loop that reads only the even
elements: a[2*i]) because that implies that we'll require a scalar epilogue
(which is not allowed under Opt for Size). This patch extends the support for
masked-interleave-groups (introduced by D53011 for conditional accesses) to
also cover the case of gaps in a group of loads; Targets that enable the
masked-interleave-group feature don't have to invalidate interleave-groups of
loads with gaps; they could now use masked wide-loads and shuffles (if that's
what the cost model selects).
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53668
llvm-svn: 345705
The CONCAT_VECTORS case was using the original mask element count to determine how to adjust the broadcast index. But if we looked through a bitcast the original mask size doesn't tell us anything about the concat_vectors.
This patch switchs to using the concat_vectors input element count directly instead.
Differential Revision: https://reviews.llvm.org/D53823
llvm-svn: 345626
Summary:
The final pattern.
There is no test changes:
* We are looking for the pattern with one-use of it's mask,
* If the mask is one-use, D48768 will unfold it into pattern d.
* Thus, the tests have extra-use on the mask.
* Thus, only the BMI2 BZHI can be tested, and it already worked.
* So there is no BMI1 test coverage, we just assume it works since it uses the same codepath.
Reviewers: craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53575
llvm-svn: 345584
Summary: Previously if we had a bitcast vector output type that needs promotion and a vector input type that needs widening we would just do a stack store and load to handle the conversion. We can do a little better if we can widen the bitcast to a legal vector type the same size as the widened input type. Then we can do the bitcast between this widened type and the widened input type. Afterwards we can extract_subvector back to the original output and any_extend that. Type legalization will then circle back and handle promotion of the extract_subvector and the any_extend will just be removed. This will avoid going through the stack and allows us to remove a custom version of this legalization from X86.
Reviewers: efriedma, RKSimon
Reviewed By: efriedma
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D53229
llvm-svn: 345567
Use SelectionDAG::EVTToAPFloatSemantics. Make the LogicVT calculation in LowerFABSorFNEG similar to LowerFCOPYSIGN. Use APInt::getSignedMaxValue instead of ~APInt::getSignMask.
llvm-svn: 345565
The machine verifier was disabled for x86 by default. There are now only
9 tests failing, compared to what previously was between 20 and 30.
This is a good opportunity to file bugs for all the remaining issues,
then explicitly disable the failing tests and enabling the machine
verifier by default.
This allows us to avoid adding new tests that break the verifier.
PR27481
llvm-svn: 345513
When the floating point constants are whole numbers they have no decimal point so look like integers, but mean something very different in something like an 'and' instruction.
Ideally we would just print a decimal point and a 0, but I couldn't see how to make APFloat::toString do that.
llvm-svn: 345488
Add vector support to TargetLowering::expandFP_TO_UINT.
This exposes an issue in X86TargetLowering::LowerVSELECT which was assuming that the select mask was the same width as the LHS/RHS ops - as long as the result is a sign splat we can easily sext/trunk this.
llvm-svn: 345473
Makes no difference to actual shuffle decoding yet, but merges all the existing limits in one place for when proper support is fixed.
........
Its been reported that this is causing out of trunk failures.
llvm-svn: 345451
Summary:
The main challenge here is that X86InstrInfo::AnalyzeBranch doesn't
understand the way we're using a CALL instruction as a branch, so we
can't list the CallTarget MBB as a successor of the entry block. If we
don't list it as a successor, then the AsmPrinter doesn't print a label
for the MBB.
Fix the issue by inserting our own label at the beginning of the call
target block. We can rely on the AsmPrinter to always emit it, even
though the block appears to be unreachable, but address-taken.
Fixes PR38391.
Reviewers: thegameg, chandlerc, echristo
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53653
llvm-svn: 345426
These promotions add additional bitcasts to the SelectionDAG that can pessimize computeKnownBits/computeNumSignBits. It also seems to interfere with broadcast formation.
This patch removes the promotion and adds isel patterns instead.
The increased table size is more than I would like, but hopefully we can find some canonicalizations or other tricks to start pruning out patterns going forward.
Differential Revision: https://reviews.llvm.org/D53268
llvm-svn: 345408
This is a narrow fix for 1 of the problems mentioned in PR27780:
https://bugs.llvm.org/show_bug.cgi?id=27780
I looked at more general solutions, but it's a mess. We canonicalize shuffle masks
based on the number of elements accessed from each operand, and that's not optional.
If you remove that, we'll crash because we fail to match isel patterns. So I'm
waiting until we're sure that we have blendvb with constant condition and then
commuting based on the load potential. Other cases like blend-with-immediate are
already handled elsewhere, so this is probably not a common problem anyway.
I didn't use "MayFoldLoad" because that checks for one-use and in these cases, we've
screwed that up by creating a temporary PSHUFB using these operands that we're counting
on to be killed later. Undoing that didn't look like a simple task because it's
intertwined with determining if we actually use both operands of the shuffle or not.a
Differential Revision: https://reviews.llvm.org/D53737
llvm-svn: 345390
The required-vector-width attribute was only used for backend testing and has never been generated by clang.
I believe clang is now generating min-legal-vector-width for vector uses in user code.
With this I believe passing -mprefer-vector-width=256 to clang should prevent use of zmm registers in the generated assembly unless the user used a 512-bit intrinsic in their source code.
llvm-svn: 345317
KNL is based on a modified Silvermont core so I don't think these features apply. I think the LEA flag is probably also wrong, but I'm less sure as I barely understand the 3 LEA flags we have currently.
Differential Revision: https://reviews.llvm.org/D53671
llvm-svn: 345285
Summary:
The pfm counters are now in the ExegesisTarget rather than the
MCSchedModel (PR39165).
This also compresses the pfm counter tables (PR37068).
Reviewers: RKSimon, gchatelet
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D52932
llvm-svn: 345243
Multiply a is complex operation so just because some bit of the output isn't used doesn't mean that bit of the input isn't used.
We might able to bound it, but it will require some more thought.
llvm-svn: 345241
Instead of using the MOVGOT64r pseudo, use the existing
MO_PIC_BASE_OFFSET support on symbol operands. Now I don't have to
create a "scratch register operand" for the pseudo to use, and the
register allocator can make better decisions.
Fixes some X86 verifier errors tracked in PR27481.
llvm-svn: 345219
It's possible to do a tail call to a stack argument. LLVM already
calculates the right stack offset to call through.
Fixes the sibcall* and musttail* verifier failures tracked at PR27481.
llvm-svn: 345197
Summary:
This renames the IsParsingMSInlineAsm member variable of AsmLexer to
LexMasmIntegers and moves it up to MCAsmLexer. This is the only behavior
controlled by that variable. I added a public setter, so that it can be
set from outside or from the llvm-mc command line. We may need to
arrange things so that users can get this behavior from clang, but
that's future work.
I also put additional hex literal lexing functionality under this flag
to fix PR32973. It appears that this hex literal parsing wasn't intended
to be enabled in non-masm-style blocks.
Now, masm integers (0b1101 and 0ABCh) work in __asm blocks from clang,
but 0b label references work when using .intel_syntax in standalone .s
files.
However, 0b label references will *not* work from __asm blocks in clang.
They will work from GCC inline asm blocks, which it sounds like is
important for Crypto++ as mentioned in PR36144.
Essentially, we only lex masm literals for inline asm blobs that use
intel syntax. If the .intel_syntax directive is used inside a gnu-style
inline asm statement, masm literals will not be lexed, which is
compatible with gas and llvm-mc standalone .s assembly.
This fixes PR36144 and PR32973.
Reviewers: Gerolf, avt77
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53535
llvm-svn: 345189
I'm not sure all the microarchitectural tuning flags that have been added to IVBFeatures are relevant for KNL. Separating will allow us to see and audit them. There might even be some simplification opportunities in the Sandy Bridge through Icelake inheritance line without KNL using the same chain.
llvm-svn: 345183
Add X86 SimplifyDemandedBitsForTargetNode and use it to simplify PMULDQ/PMULUDQ target nodes.
This enables us to repeatedly simplify the node's arguments after the previous approach had to be reverted due to PR39398.
Differential Revision: https://reviews.llvm.org/D53643
llvm-svn: 345182
This patch brings back the MOV64r0 pseudo instruction for zeroing a 64-bit register. This replaces the SUBREG_TO_REG MOV32r0 sequence we use today. Post register allocation we will rewrite the MOV64r0 to a 32-bit xor with an implicit def of the 64-bit register similar to what we do for the various XMM/YMM/ZMM zeroing pseudos.
My main motivation is to enable the spill optimization in foldMemoryOperandImpl. As we were seeing some code that repeatedly did "xor eax, eax; store eax;" to spill several registers with a new xor for each store. With this optimization enabled we get a store of a 0 immediate instead of an xor. Though I admit the ideal solution would be one xor where there are multiple spills. I don't believe we have a test case that shows this optimization in here. I'll see if I can try to reduce one from the code were looking at.
There's definitely some other machine CSE(and maybe other passes) behavior changes exposed by this patch. So it seems like there might be some other deficiencies in SUBREG_TO_REG handling.
Differential Revision: https://reviews.llvm.org/D52757
llvm-svn: 345165
Non-uniform division/remainder handling was added back at D49248/D50765 - so share the 'mul+sub' costs that already exist for uniform cases.
llvm-svn: 345164
This B/W VPTEST instructions are only available with AVX512BW. But lowering should prevent any byte or word elements from getting to isel so this can't be exposed.
llvm-svn: 345112
When implementing memset's today we often see this pattern:
$x0 = MOV 0xXYXYXYXYXYXYXYXY
store $x0, ...
$w1 = MOV 0xXYXYXYXY
store $w1, ...
We first create a 64bit constant in a 64bit register with all bytes the
same and then create a 32bit constant with all bytes the same in a 32bit
register. In many targets we could just access the lower byte of the
64bit register instead.
- Ideally this would be handled by the ConstantHoist pass but it runs
too early when memset isn't expanded yet.
- The memset expansion code already had this optimization implemented,
however SelectionDAG constantfolding would constantfold the
"trunc(bigconstnat)" pattern to "smallconstant".
- This patch makes the memset expansion mark the constant as Opaque and
stop DAGCombiner from constant folding in this situation. (Similar to
how ConstantHoisting marks things as Opaque to avoid folding
ADD/SUB/etc.)
Differential Revision: https://reviews.llvm.org/D53181
llvm-svn: 345102
We can't add the MULDQ node back to the worklist after the demanded bits change has been committed in case the node has been removed entirely. This will have to wait until we have SimplifyDemandedBitsForTargetNode.
llvm-svn: 345070
This initially landed in rL345014, but was reverted in rL345017
due to sanitizer-x86_64-linux-fast buildbot failure in
check-lld (ELF/relocatable-versioned.s) test.
While i'm not yet quite sure what is the problem, one obvious
thing here is that extra truncation roundtrip.
Maybe that's it? If not, will re-revert.
Differential Revision: https://reviews.llvm.org/D53521
llvm-svn: 345027
Matches the approach taken in the constant pool shuffle decoders, and uses an UndefElts mask instead of uint64_t(-1) raw mask values, which doesn't work safely for i32/i64 shuffle mask sizes (as the -1 value is legal).
This allows us to remove the constant pool shuffle decoders from most of the getTargetShuffleMask variable shuffle cases (X86ISD::VPERMV3 will be handled in a future commit).
llvm-svn: 345018
Summary:
Continuation of D52348.
We also get the `c) x & (-1 >> (32 - y))` pattern here, because of the D48768.
I will add extra-uses into those tests and follow-up with a patch to handle those patterns too.
Reviewers: RKSimon, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53521
llvm-svn: 345014
analyzeBranch()/insertBranch() etc. do not properly deal with an undef
flag on the eflags input and used to produce invalid MIR. I don't see
this ever affecting real world inputs (I don't think it is possible to
produce undef flags with llvm IR), so I simply changed the code to bail
out in this case.
rdar://42122367
llvm-svn: 344970
I've included a fix to DAGCombiner::ForwardStoreValueToDirectLoad that I believe will prevent the previous miscompile.
Original commit message:
Theoretically this was done to simplify the amount of isel patterns that were needed. But it also meant a substantial number of our isel patterns have to match an explicit bitcast. By making the vXi32/vXi16/vXi8 types legal for loads, DAG combiner should be able to change the load type to rem
I had to add some additional plain load instruction patterns and a few other special cases, but overall the isel table has reduced in size by ~12000 bytes. So it looks like this promotion was hurting us more than helping.
I still have one crash in vector-trunc.ll that I'm hoping @RKSimon can help with. It seems to relate to using getTargetConstantFromNode on a load that was shrunk due to an extract_subvector combine after the constant pool entry was created. So we end up decoding more mask elements than the lo
I'm hoping this patch will simplify the number of patterns needed to remove the and/or/xor promotion.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D53306
llvm-svn: 344965
A while ago we changed pushf and popf in Intel mode to generate pushfq
and popfq. Unfortunately that left us with no way to get the 16-bit
encoding in Intel mode so this patch adds pushfw and popfw as aliases
there.
llvm-svn: 344949
We can't safely assume that certain RawMask entries are UNDEF as most variable shuffles ignore non-index bits - PSHUFB only works on i8 elts so it'd be safe to use but I'm intending to come up with an alternative approach that works for all.
........
Enable this for PSHUFB constant mask decoding and remove the ConstantPool DecodePSHUFBMask
llvm-svn: 344937
We can't safely assume that certain RawMask entries are UNDEF as most variable shuffles ignore non-index bits.
........
Add support for UNDEF raw mask elements and remove the ConstantPool DecodeVPERMILPMask usage in X86ISelLowering.cpp
llvm-svn: 344936
Summary:
As discussed in D52304 / IRC, we now have pattern matching for
'bit extract' in two places - tablegen and `X86DAGToDAGISel`.
There are 4 patterns.
And we will have a problem with `x & (-1 >> (32 - y))` pattern.
* If the mask is one-use, then it is always unfolded into `x << (32 - y) >> (32 - y)` first.
Thus, the existing test coverage is already broken.
* If it is not one-use, then it is not unfolded, and is matched as BZHI.
* If it is not one-use, we will not match it as BEXTR. And if it is one-use, it will have been unfolded already.
So we will either not handle that pattern for BEXTR, or not have test coverage for it.
This is bad.
As discussed with @craig.topper, let's unify this matching, and do everything in `X86DAGToDAGISel`.
Then we will not have code duplication, and will have proper test coverage.
This indeed does not affect any tests, and this is great.
It means that for these two patterns, the `X86DAGToDAGISel` is identical to the tablegen version.
Please review carefully, i'm not fully sure about that intrinsic change, and introduction of the new `X86ISD` opcode.
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: craig.topper
Subscribers: llvm-commits, craig.topper
Differential Revision: https://reviews.llvm.org/D53164
llvm-svn: 344904
Summary:
Trivial continuation of D52304.
While this pattern is not canonical, we do select it in the BZHI case,
so this should not be any different.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52348
llvm-svn: 344902
This makes fast isel treat all legal vector types the same way. Previously only vXi64 was in the fast-isel tables.
This unfortunately prevents matching of andn by fast-isel for these types since the requires SelectionDAG. But we already had this issue for vXi64. So at least we're consistent now.
Interestinly it looks like fast-isel can't handle instructions with constant vector arguments so the the not part of the andn patterns is selected with SelectionDAG. This explains why VPTERNLOG shows up in some of the tests.
This is a subset of D53268. As I make progress on that, I will try to reduce the number of lines in the tablegen files.
llvm-svn: 344884
Summary:
Theoretically this was done to simplify the amount of isel patterns that were needed. But it also meant a substantial number of our isel patterns have to match an explicit bitcast. By making the vXi32/vXi16/vXi8 types legal for loads, DAG combiner should be able to change the load type to remove the bitcast.
I had to add some additional plain load instruction patterns and a few other special cases, but overall the isel table has reduced in size by ~12000 bytes. So it looks like this promotion was hurting us more than helping.
I still have one crash in vector-trunc.ll that I'm hoping @RKSimon can help with. It seems to relate to using getTargetConstantFromNode on a load that was shrunk due to an extract_subvector combine after the constant pool entry was created. So we end up decoding more mask elements than the load size.
I'm hoping this patch will simplify the number of patterns needed to remove the and/or/xor promotion.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D53306
llvm-svn: 344877
Summary:
These nodes exist to overcome an isel problem where we can generate a zero extend of an AH register followed by an extract subreg, and another zero extend. The first zero extend exists to avoid a partial register update copying the AH register into the low 8-bits. The second zero extend exists if the user wanted the remainder zero extended.
To make this work we had a DAG combine to morph the DIVREM opcode to a special opcode that included the extend. But then we had to add the new node to computeKnownBits and computeNumSignBits to process the extension portion.
This patch instead removes all of that and adds a late peephole to detect the two extends.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53449
llvm-svn: 344874
D53306 exposes an issue where we sometimes use constant pool data from bigger vectors than the target shuffle mask. This should be safe to do, but we have to be certain that we're using the bottom most part of the vector as the shuffle mask decoders have no way to peek into subvectors with non-zero offsets.
llvm-svn: 344867
There is no guarantee the root is at the end if isel created any nodes without morphing them. This includes the nodes created by manual isel from C++ code in X86ISelDAGToDAG.
This is similar to r333415 from PowerPC which is where I originally stole the peephole loop from.
I don't have a test case, but without this a future patch doesn't work which is how I found it.
llvm-svn: 344808
Allows to disable direct TLS segment access (%fs or %gs). GCC supports
a similar flag, it can be useful in some circumstances, e.g. when a thread
context block needs to be updated directly from user space. More info
and specific use cases: https://bugs.llvm.org/show_bug.cgi?id=16145
There is another revision for clang as well.
Related: D53102
All X86 CodeGen tests appear to pass:
```
[46/47] Running lit suite /SourceCache/llvm-trunk-8.0/test/CodeGen
Testing Time: 23.17s
Expected Passes : 3801
Expected Failures : 15
Unsupported Tests : 8021
```
Reviewed by: Craig Topper.
Patch by nruslan (Ruslan Nikolaev).
Differential Revision: https://reviews.llvm.org/D53103
llvm-svn: 344723
Without this we match the CMP+AND to a TEST and then match the SHR separately. I'm trusting analyzeCompare to remove the TEST during the peephole pass. Otherwise we need to check the flag users to see if they only use the Z flag.
This recovers a case lost by r344270.
Differential Revision: https://reviews.llvm.org/D53310
llvm-svn: 344649
These included a bitcast of a load from v4f32 to v2f64, but DAG combine should have already changed the type of the load to remove the cast.
llvm-svn: 344573
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
Summary:
I've noticed that the bitcasts we introduce for these make computeKnownBits and computeNumSignBits not work well in LegalizeVectorOps. LegalizeVectorOps legalizes bottom up while LegalizeDAG legalizes top down. The bottom up strategy for LegalizeVectorOps means operands are legalized before their uses. So we promote and/or/xor before we legalize the operands that use them making computeKnownBits/computeNumSignBits in places like LowerTruncate suboptimal. I looked at changing LegalizeVectorOps to be top down as well, but that was more disruptive and caused some regressions. I also looked at just moving promotion of binops to LegalizeDAG, but that had a few issues one around matching AND,ANDN,OR into VSELECT because I had to create ANDN as vXi64, but the other nodes hadn't legalized yet, I didn't look too hard at fixing that.
This patch seems to produce better results overall than my other attempts. We now form broadcasts of constants better in some cases. For at least some of them the AND was being introduced in LegalizeDAG, promoted to vXi64, and the BUILD_VECTOR was also legalized there. I think we got bad ordering of that. Now the promotion is out of the legalizer so we handle this better.
In the longer term I think we really should evaluate whether we should be doing this promotion at all. It's really there to reduce isel pattern count, but I'm wondering if we'd be better served just eating the pattern cost or doing C++ based isel for vector and/or/xor in X86ISelDAGToDAG. The masked and/or/xor will definitely be difficult in patterns if a bitcast gets between the vselect and the and/or/xor node. That becomes a lot of permutations to cover.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53107
llvm-svn: 344487
interleave-group
The vectorizer currently does not attempt to create interleave-groups that
contain predicated loads/stores; predicated strided accesses can currently be
vectorized only using masked gather/scatter or scalarization. This patch makes
predicated loads/stores candidates for forming interleave-groups during the
Loop-Vectorizer's analysis, and adds the proper support for masked-interleave-
groups to the Loop-Vectorizer's planning and transformation stages. The patch
also extends the TTI API to allow querying the cost of masked interleave groups
(which each target can control); Targets that support masked vector loads/
stores may choose to enable this feature and allow vectorizing predicated
strided loads/stores using masked wide loads/stores and shuffles.
Reviewers: Ayal, hsaito, dcaballe, fhahn, javed.absar
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53011
llvm-svn: 344472
Summary: This is similar to what D52528 did for loads. It should match what generic type legalization does in 64-bit mode where it uses a v2i64 cast and an i64 store.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53173
llvm-svn: 344470
There is one remnant - AVX1 custom splitting of 256-bit vectors - which is due to a regression where the X86ISD::ANDNP is still performed as a YMM.
I've also tightened the CTLZ or CTPOP lowering in SelectionDAGLegalize::ExpandBitCount to require a legal CTLZ - it doesn't affect existing users and fixes an issue with AVX512 codegen.
llvm-svn: 344457
Use isConstantSplat instead of ISD::isConstantSplatVector to let us us peek through to illegal types (in this case for i686 targets to recognise i64 constants)
llvm-svn: 344452
If we have better CTLZ support than CTPOP, then use cttz(x) = width - ctlz(~x & (x - 1)) - and remove the CTTZ_ZERO_UNDEF handling as it no longer gives better codegen.
Similar to rL344447, this is also closer to LegalizeDAG's approach
llvm-svn: 344448
This patch changes the vector CTTZ lowering from:
cttz(x) = ctpop((x & -x) - 1)
to:
cttz(x) = ctpop(~x & (x - 1))
Not only does this make better use of the PANDN instruction, but it also matches the LegalizeDAG method which should allow us to remove the x86 specific code at some point in the future (we need to fix some issues with the bitcasted logic ops and CTPOP lowering first).
Differential Revision: https://reviews.llvm.org/D53214
llvm-svn: 344447
Add shuffle lowering for the case where we can shuffle the lanes into place followed by an in-lane permute.
This is mainly for cases where we can have non-repeating permutes in each lane, but for now I've just enabled it for v4f64 unary shuffles to fix PR39161 - there is no test coverage for other shuffles that might benefit yet.
We now have several cross-lane shuffle lowering methods that all do something similar - I've looked at merging some of these (notably by making the repeated mask mechanism in lowerVectorShuffleByMerging128BitLanes optional), but there is a lot of assertions/assumptions in the way that makes this tricky - I ended up going for adding yet another relatively simple method instead.
Differential Revision: https://reviews.llvm.org/D53148
llvm-svn: 344446
Generic legalization should be able to finish legalizing the EXTRACT_SUBVECTOR probably by turning it into a BUILD_VECTOR. But we should emit the simplest sequence.
llvm-svn: 344424
The algorithm we would do previously was identical to generic legalization. If we ever switch to legalizing integer vectors via widening we'll be able to kill off the code since it now only runs for promotion.
llvm-svn: 344423
This is the planned follow-up to D52997. Here we are reducing horizontal vector math codegen
by default. AMD Jaguar (btver2) should have no difference with this patch because it has
fast-hops. (If we want to set that bit for other CPUs, let me know.)
The code changes are small, but there are many test diffs. For files that are specifically
testing for hops, I added RUNs to distinguish fast/slow, so we can see the consequences
side-by-side. For files that are primarily concerned with codegen other than hops, I just
updated the CHECK lines to reflect the new default codegen.
To recap the recent horizontal op story:
1. Before rL343727, we were producing hops for all subtargets for a variety of patterns.
Hops were likely not optimal for all targets though.
2. The IR improvement in r343727 exposed a hole in the backend hop pattern matching, so
we reduced hop codegen for all subtargets. That was bad for Jaguar (PR39195).
3. We restored the hop codegen for all targets with rL344141. Good for Jaguar, but
probably bad for other CPUs.
4. This patch allows us to distinguish when we want to produce hops, so everyone can be
happy. I'm not sure if we have the best predicate here, but the intent is to undo the
extra hop-iness that was enabled by r344141.
Differential Revision: https://reviews.llvm.org/D53095
llvm-svn: 344361
Pull out repeated byte sum stage for popcount of vector elements > 8bits.
This allows us to simplify the LUT/BITMATH popcnt code to always assume vXi8 vectors, and also improves avx512bitalg codegen which only has access to vpopcntb/vpopcntw.
llvm-svn: 344348
Fixes PR32160 by reducing the size of PSHUFB if we only use one of the lanes.
This approach can probably be generalized to handle any target shuffle (and any subvector index) but we have no test coverage at the moment.
llvm-svn: 344336
This patch adds the ability to identify instructions that are "move elimination
candidates". It also allows scheduling models to describe processor register
files that allow move elimination.
A move elimination candidate is an instruction that can be eliminated at
register renaming stage.
Each subtarget can specify which instructions are move elimination candidates
with the help of tablegen class "IsOptimizableRegisterMove" (see
llvm/Target/TargetInstrPredicate.td).
For example, on X86, BtVer2 allows both GPR and MMX/SSE moves to be eliminated.
The definition of 'IsOptimizableRegisterMove' for BtVer2 looks like this:
```
def : IsOptimizableRegisterMove<[
InstructionEquivalenceClass<[
// GPR variants.
MOV32rr, MOV64rr,
// MMX variants.
MMX_MOVQ64rr,
// SSE variants.
MOVAPSrr, MOVUPSrr,
MOVAPDrr, MOVUPDrr,
MOVDQArr, MOVDQUrr,
// AVX variants.
VMOVAPSrr, VMOVUPSrr,
VMOVAPDrr, VMOVUPDrr,
VMOVDQArr, VMOVDQUrr
], CheckNot<CheckSameRegOperand<0, 1>> >
]>;
```
Definitions of IsOptimizableRegisterMove from processor models of a same
Target are processed by the SubtargetEmitter to auto-generate a target-specific
override for each of the following predicate methods:
```
bool TargetSubtargetInfo::isOptimizableRegisterMove(const MachineInstr *MI)
const;
bool MCInstrAnalysis::isOptimizableRegisterMove(const MCInst &MI, unsigned
CPUID) const;
```
By default, those methods return false (i.e. conservatively assume that there
are no move elimination candidates).
Tablegen class RegisterFile has been extended with the following information:
- The set of register classes that allow move elimination.
- Maxium number of moves that can be eliminated every cycle.
- Whether move elimination is restricted to moves from registers that are
known to be zero.
This patch is structured in three part:
A first part (which is mostly boilerplate) adds the new
'isOptimizableRegisterMove' target hooks, and extends existing register file
descriptors in MC by introducing new fields to describe properties related to
move elimination.
A second part, uses the new tablegen constructs to describe move elimination in
the BtVer2 scheduling model.
A third part, teaches llm-mca how to query the new 'isOptimizableRegisterMove'
hook to mark instructions that are candidates for move elimination. It also
teaches class RegisterFile how to describe constraints on move elimination at
PRF granularity.
llvm-mca tests for btver2 show differences before/after this patch.
Differential Revision: https://reviews.llvm.org/D53134
llvm-svn: 344334
DIV/REM by constants should always be expanded into mul/shift/etc.
patterns. Unfortunately the ConstantHoisting pass runs too early at a
point where the pattern isn't expanded yet. However after
ConstantHoisting hoisted some immediate the result may not expand
anymore. Also the hoisting typically doesn't make sense because it
operates on immediates that will change completely during the expansion.
Report DIV/REM as TCC_Free so ConstantHoisting will not touch them.
Differential Revision: https://reviews.llvm.org/D53174
llvm-svn: 344315
On 64-bit targets the generic legalize will use an i64 load and a scalar_to_vector for us. But on 32-bit targets i64 isn't legal and the generic legalizer will end up emitting two 32-bit loads. We have DAG combines that try to put those two loads back together with pretty good success.
This patch instead uses f64 to avoid the splitting entirely. I've made it do the same for 64-bit mode for consistency and to keep the load in the fp domain.
There are a few things in here that look like regressions in 32-bit mode, but I believe they bring us closer to the 64-bit mode codegen. And that the 64-bit mode code could be better. I think those issues should be looked at separately.
Differential Revision: https://reviews.llvm.org/D52528
llvm-svn: 344291
This is an alternative to D53080 since I think using a BEXTR for a shifted mask is definitely an improvement when the shl can be absorbed into addressing mode. The other cases I'm less sure about.
We already have several tricks for handling an and of a shift in address matching. This adds a new case for BEXTR.
I've moved the BEXTR matching code back to X86ISelDAGToDAG to allow it to match. I suppose alternatively we could directly emit a X86ISD::BEXTR node that isel could pattern match. But I'm trying to view BEXTR matching as an isel concern so DAG combine can see 'and' and 'shift' operations that are well understood. We did lose a couple cases from tbm_patterns.ll, but I think there are ways to recover that.
I've also put back the manual load folding code in matchBEXTRFromAnd that I removed a few months ago in r324939. This gives us some more freedom to make decisions based on the ability to fold a load. I haven't done anything with that yet.
Differential Revision: https://reviews.llvm.org/D53126
llvm-svn: 344270
Summary:
As discussed in D48491, we can't really do this in the TableGen,
since we need to produce *two* instructions. This only implements
one single pattern. The other 3 patterns will be in follow-ups.
I'm not sure yet if we want to also fuse shift into here
(i.e `(x >> start) & ...`)
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D52304
llvm-svn: 344224
Remove tryFoldVecLoad since tryFoldLoad would call IsProfitableToFold and pick up the new check.
This saves about 5K out of ~600K on the generated isel table.
llvm-svn: 344189
Summary:
As discussed in [[ https://bugs.llvm.org/show_bug.cgi?id=38938 | PR38938 ]],
we fail to emit `BEXTR` if the mask is shifted.
We can't deal with that in `X86DAGToDAGISel` `before the address mode for the inc is selected`,
and we can't really do it in the normal DAGCombine, because we don't have generic `ISD::BitFieldExtract` node,
and if we simply turn the shifted mask into a normal mask + shift-left, it will be folded back.
So it would seem X86ISelLowering is the place to handle this.
This patch only moves the matchBEXTRFromAnd()
from X86DAGToDAGISel to X86ISelLowering.
It does not add support for the 'shifted mask' pattern.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52426
llvm-svn: 344179
This is intended to restore horizontal codegen to what it looked like before IR demanded elements improved in:
rL343727
As noted in PR39195:
https://bugs.llvm.org/show_bug.cgi?id=39195
...horizontal ops can be worse for performance than a shuffle+regular binop, so I've added a TODO. Ideally, we'd
solve that in a machine instruction pass, but a quicker solution will be adding a 'HasFastHorizontalOp' feature
bit to deal with it here in the DAG.
Differential Revision: https://reviews.llvm.org/D52997
llvm-svn: 344141
Similar to what already happens in the DAGCombiner wrappers, this patch adds the root nodes back onto the worklist if the DCI wrappers' SimplifyDemandedBits/SimplifyDemandedVectorElts were successful.
Differential Revision: https://reviews.llvm.org/D53026
llvm-svn: 344132
This may give slightly better opportunities for DAG combine to simplify with the operations before the setcc. It also matches the type the xors will eventually be promoted to anyway so it saves a legalization step.
Almost all of the test changes are because our constant pool entry is now v2i64 instead of v4i32 on 64-bit targets. On 32-bit targets getConstant should be emitting a v4i32 build_vector and a v4i32->v2i64 bitcast.
There are a couple test cases where it appears we now combine a bitwise not with one of these xors which caused a new constant vector to be generated. This prevented a constant pool entry from being shared. But if that's an issue we're concerned about, it seems we need to address it another way that just relying a bitcast to hide it.
This came about from experiments I've been trying with pushing the promotion of and/or/xor to vXi64 later than LegalizeVectorOps where it is today. We run LegalizeVectorOps in a bottom up order. So the and/or/xor are promoted before their users are legalized. The bitcasts added for the promotion act as a barrier to computeKnownBits if we try to use it during vector legalization of a later operation. So by moving the promotion out we can hopefully get better results from computeKnownBits/computeNumSignBits like in LowerTruncate on AVX512. I've also looked at running LegalizeVectorOps in a top down order like LegalizeDAG, but thats showing some other issues.
llvm-svn: 344071
As noted in D52747, if we prefer IR to use trunc for bool vectors rather
than and+icmp, we can expose codegen shortcomings as seen here with masked store.
Replace a hard-coded PCMPGT simplification with the more general demanded bits call
to improve things.
Differential Revision: https://reviews.llvm.org/D52964
llvm-svn: 344048
As discussed on D52964, this adds 256-bit *_EXTEND_VECTOR_INREG lowering support for AVX1 targets to help improve SimplifyDemandedBits handling.
Differential Revision: https://reviews.llvm.org/D52980
llvm-svn: 344019
Simple types are a superset of what all in tree targets in LLVM could possibly have a legal type. This means the behavior of using isSimple to check for a supported type for X86 could change over time. For example, this could would change if a v256i1 type was added to MVT in the future.
llvm-svn: 343995
This patch implements a pass that optimizes condition branches on x86 by
taking advantage of the three-way conditional code generated by compare
instructions.
Currently, it tries to hoisting EQ and NE conditional branch to a dominant
conditional branch condition where the same EQ/NE conditional code is
computed. An example:
bb_0:
cmp %0, 19
jg bb_1
jmp bb_2
bb_1:
cmp %0, 40
jg bb_3
jmp bb_4
bb_4:
cmp %0, 20
je bb_5
jmp bb_6
Here we could combine the two compares in bb_0 and bb_4 and have the
following code:
bb_0:
cmp %0, 20
jg bb_1
jl bb_2
jmp bb_5
bb_1:
cmp %0, 40
jg bb_3
jmp bb_6
For the case of %0 == 20 (bb_5), we eliminate two jumps, and the control height
for bb_6 is also reduced. bb_4 is gone after the optimization.
This optimization is motivated by the branch pattern generated by the switch
lowering: we always have pivot-1 compare for the inner nodes and we do a pivot
compare again the leaf (like above pattern).
This pass currently is enabled on Intel's Sandybridge and later arches. Some
reviewers pointed out that on some arches (like AMD Jaguar), this pass may
increase branch density to the point where it hurts the performance of the
branch predictor.
Differential Revision: https://reviews.llvm.org/D46662
llvm-svn: 343993
Some necessary yak shaving before lowering *_EXTEND_VECTOR_INREG 256-bit vectors on AVX1 targets as suggested by D52964.
Differential Revision: https://reviews.llvm.org/D52970
llvm-svn: 343991
The instructions are complicated, so this code will
probably never be very obvious, but hopefully this
makes it better.
As shown in PR39195:
https://bugs.llvm.org/show_bug.cgi?id=39195
...we need to improve the matching to not miss cases
where we're h-opping on 1 source vector, and that
should be a small patch after this rearranging.
llvm-svn: 343989
Support G_UDIV/G_UREM/G_SREM. The instruction selection
code is taken from FastISel with only minor tweaks to adapt
for GlobalISel.
Differential Revision: https://reviews.llvm.org/D49781
llvm-svn: 343966
Prevents missing other simplifications that may occur deep in the operand chain where CommitTargetLoweringOpt won't add the PMULDQ back to the worklist itself
llvm-svn: 343922
Attempt to simplify PSHUFB masks (even non-constant ones) - we should probably be able to simplify other variable shuffles as well as the need arises.
llvm-svn: 343919
This rebases and recommits r343520. hwasan should be fixed now and this
shouldn't break the tests anymore.
Spill/reload instructions are artificially generated by the compiler and
have no relation to the original source code. So the best thing to do is
not attach any debug location to them (instead of just taking the next
debug location we find on following instructions).
Differential Revision: https://reviews.llvm.org/D52125
llvm-svn: 343895
rL343853 didn't limit the number of subinputs, but we don't currently support faux shuffles with more than 2 total inputs, so put a limiter in place until this is fixed.
Found by Artem Dergachev.
llvm-svn: 343891
The comments in this code say we were trying to avoid 16-bit immediates, but if the immediate fits in 8-bits this isn't an issue. This avoids creating a zero extend that probably won't go away.
The movmskb related changes are interesting. The movmskb instruction writes a 32-bit result, but fills the upper bits with 0. So the zero_extend we were previously emitting was free, but we turned a -1 immediate that would fit in 8-bits into a 32-bit immediate so it was still bad.
llvm-svn: 343871
Currently we hardcode instructions with ReadAfterLd if the register operands don't need to be available until the folded load has completed. This doesn't take into account the different load latencies of different memory operands (PR36957).
This patch adds a ReadAfterFold def into X86FoldableSchedWrite to replace ReadAfterLd, allowing us to specify the load latency at a scheduler class level.
I've added ReadAfterVec*Ld classes that match the XMM/Scl, XMM and YMM/ZMM WriteVecLoad classes that we currently use, we can tweak these values in future patches once this infrastructure is in place.
Differential Revision: https://reviews.llvm.org/D52886
llvm-svn: 343868
Decode subvector shuffles from INSERT_SUBVECTOR(SRC0, SHUFFLE(EXTRACT_SUBVECTOR(SRC1))
This was found necessary while investigating PR39161
llvm-svn: 343853
Finally all targets are enabling multiple regalloc hints, so the hook to
disable this can now be removed.
NFC.
Review: Simon Pilgrim
https://reviews.llvm.org/D52316
llvm-svn: 343851
Previously we replaced the chain use ourself and return the data result. LegalizeVectorOps then detected that we'd done this and assumed the chain had already been handled.
This commit instead returns a MERGE_VALUES node with two results joined from nodes. This allows LegalizeVectorOps to do all the replacements for us without any special casing. The MERGE_VALUES will be removed by DAG combine.
llvm-svn: 343817
This can happen if assembling a reference to _GLOBAL_OFFSET_TABLE_.
While it doesn't make sense to try to assemble that for COFF,
the fact that we previously used llvm_unreachable meant that the code
had undefined behaviour if something tried to assemble that.
The configure script of libgmp would try to assemble such a snippet
(which should signal a failure). If llvm is built without assertions,
the undefined behaviour meant a (near) infinite loop.
Differential Revision: https://reviews.llvm.org/D52903
llvm-svn: 343811
The additional patterns needed for this aren't overwhelming and introducing extra bitcasts during lowering limits our ability to do computeNumSignBits. Not that I have a good example of that for select. I'm just becoming increasingly grumpy about promotion of AND/OR/XOR. SELECT was just a lot easier to fix.
llvm-svn: 343723
This patch adds a 'WriteCopy' [WriteLoad, WriteStore] schedule sequence instead to better model the behaviour
Found by @andreadb during llvm-mca testing on btver2 which was crashing on "zero uop" WriteRMW only instructions
llvm-svn: 343708
Fix use of SSE1 registers for f32 ops in no-x87 mode.
Notably, allow use of SSE instructions for f32 operations in 64-bit
mode (but not 32-bit which is disallowed by callign convention).
Also avoid translating memset/memcopy/memmove into SSE registers
without X87 for 32-bit mode.
This fixes PR38738.
Reviewers: nickdesaulniers, craig.topper
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D52555
llvm-svn: 343689
I was expecting this to be a nfc but Silvermont seems to be setup a little differently:
// A folded store needs a cycle on MEC_RSV for the store data, but it does not need an extra port cycle to recompute the address.
def : WriteRes<WriteRMW, [SLM_MEC_RSV]>;
So moving from WriteStore to WriteRMW reduces predicted port pressure, confirmed by @craig.topper that this is correct.
Differential Revision: https://reviews.llvm.org/D52740
llvm-svn: 343670
The 0x63 opcodes in 64-bit mode have a fixed source size of 32-bits, but the destination size is controlled by REX.W and the 0x66 opsize prefix. This instruction is normally used with a REX.W prefix which provides desired behavior. The other encodings are interpretted as valid by the processor, but aren't useful.
This patch makes us recognize them for the disassembler to match objdump.
llvm-svn: 343614
Add the .cv_fpo_stackalign directive so that we can define $T0, or the
VFRAME virtual register, with it. This was overlooked in the initial
implementation because unlike MSVC, we push CSRs before allocating stack
space, so this value is only needed to describe local variable
locations. Variables that the compiler now addresses via ESP are instead
described as being stored at offsets from VFRAME, which for us is ESP
after alignment in the prologue.
This adds tests that show that we use the VFRAME register properly in
our S_DEFRANGE records, and that we emit the correct FPO data to define
it.
Fixes PR38857
llvm-svn: 343603
Consistently try to use APFloat::toString for floating point constant comments to get rid of differences between Constant / ConstantDataSequential values - it should help stop some of the linux-windows buildbot failures matching NaN/INF etc. as well.
Differential Revision: https://reviews.llvm.org/D52702
llvm-svn: 343562
Summary:
Before this change, LLVM would always describe locals on the stack as
being relative to some specific register, RSP, ESP, EBP, ESI, etc.
Variables in stack memory are pretty common, so there is a special
S_DEFRANGE_FRAMEPOINTER_REL symbol for them. This change uses it to
reduce the size of our debug info.
On top of the size savings, there are cases on 32-bit x86 where local
variables are addressed from ESP, but ESP changes across the function.
Unlike in DWARF, there is no FPO data to describe the stack adjustments
made to push arguments onto the stack and pop them off after the call,
which makes it hard for the debugger to find the local variables in
frames further up the stack.
To handle this, CodeView has a special VFRAME register, which
corresponds to the $T0 variable set by our FPO data in 32-bit. Offsets
to local variables are instead relative to this value.
This is part of PR38857.
Reviewers: hans, zturner, javed.absar
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D52217
llvm-svn: 343543
This includes a fix to prevent i16 compares with i32/i64 ands from being shrunk if bit 15 of the and is set and the sign bit is used.
Original commit message:
Currently we skip looking through truncates if the sign flag is used. But that's overly restrictive.
It's safe to look through the truncate as long as we ensure one of the 3 things when we shrink. Either the MSB of the mask at the shrunken size isn't set. If the mask bit is set then either the shrunk size needs to be equal to the compare size or the sign
There are still missed opportunities to shrink a load and fold it in here. This will be fixed in a future patch.
llvm-svn: 343539
Spill/reload instructions are artificially generated by the compiler and
have no relation to the original source code. So the best thing to do is
not attach any debug location to them (instead of just taking the next
debug location we find on following instructions).
Differential Revision: https://reviews.llvm.org/D52125
llvm-svn: 343520
There's a subtle bug in the handling of truncate from i32/i64 to i32 without minsize.
I'll be adding more test cases and trying to find a fix.
llvm-svn: 343516
This patch adds load folding support to the test shrinking code. This was noticed missing in the review for D52669
Differential Revision: https://reviews.llvm.org/D52699
llvm-svn: 343499
Currently we skip looking through truncates if the sign flag is used. But that's overly restrictive.
It's safe to look through the truncate as long as we ensure one of the 3 things when we shrink. Either the MSB of the mask at the shrunken size isn't set. If the mask bit is set then either the shrunk size needs to be equal to the compare size or the sign flag needs to be unused.
There are still missed opportunities to shrink a load and fold it in here. This will be fixed in a future patch.
Differential Revision: https://reviews.llvm.org/D52669
llvm-svn: 343498
This patch adds another variant class to identify zero-idiom VPERM2F128rr
instructions.
On Jaguar, a VPERM wih bit 3 and 7 of the mask set, is a zero-idiom.
Differential Revision: https://reviews.llvm.org/D52663
llvm-svn: 343452
Summary:
While looking at PR35606, I found out that the scheduling info is incorrect.
One can check that it's really a P5+P6 and not a 2*P56 with:
echo -e 'vzeroall\nvandps %xmm1, %xmm2, %xmm3' | ./bin/llvm-exegesis -mode=uops -snippets-file=-
(vandps executes on P5 only)
Reviewers: craig.topper, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52541
llvm-svn: 343447
We can only copy between a k-register and a GR32/GR64 register.
This patch detects that the copy will be illegal and prevents the domain reassignment from happening for that closure.
This probably isn't the best fix, and we should probably figure out how to handle this correctly.
Fixes PR38803.
llvm-svn: 343443
There's a conditional report_fatal_error just above this llvm_unreachable. The optimizer when seeing the unreachable removes the conditional and just makes any other error trigger the existing report_fatal_error.
llvm-svn: 343428
Summary:
This function turns (X >> C1) & C2 into a BMI BEXTR or TBM BEXTRI instruction. For BMI BEXTR we have to materialize an immediate into a register to feed to the BEXTR instruction.
The BMI BEXTR instruction is 2 uops on Intel CPUs. It looks like on SKL its one port 0/6 uop and one port 1/5 uop. Despite what Agner's tables say. I know one of the uops is a regular shift uop so it would have to go through the port 0/6 shifter unit. So that's the same or worse execution wise than the shift+and which is one 0/6 uop and one 0/1/5/6 uop. The move immediate into register is an additional 0/1/5/6 uop.
For now I've limited this transform to AMD CPUs which have a single uop BEXTR. If may also might make sense if we can fold a load or if the and immediate is larger than 32-bits and can't be encoded as a sign extended 32-bit value or if LICM or CSE can hoist the move immediate and share it. But we'd need to look more carefully at that. In the regression I looked at it doesn't look load folding or large immediates were occurring so the regression isn't caused by the loss of those. So we could try to be smarter here if we find a compelling case.
Reviewers: RKSimon, spatel, lebedev.ri, andreadb
Reviewed By: RKSimon
Subscribers: llvm-commits, andreadb, RKSimon
Differential Revision: https://reviews.llvm.org/D52570
llvm-svn: 343399
By removing demanded target shuffles that simplify to zero/undef/identity before simplifying its inputs we improve chances of further simplification, as only the immediate parent user of the combined is added back to the work list - this still doesn't help us if its passed through other ops though (bitcasts....).
llvm-svn: 343390
The shift amount might have peeked through a extract_subvector, altering the number of vector elements in the 'Amt' variable - so we were incorrectly calculating the ratio when peeking through bitcasts, resulting in incorrectly detecting splats.
llvm-svn: 343373
Similar to the existing ISD::SRL constant vector shifts from D49562, this patch adds ISD::SRA support with ISD::MULHS.
As we're dealing with signed values, we have to handle shift by zero and shift by one special cases, so XOP+AVX2/AVX512 splitting/extension is still a better solution - really we should still use ISD::MULHS if one of the special cases are used but for now I've just left a TODO and filtered by isKnownNeverZero.
Differential Revision: https://reviews.llvm.org/D52171
llvm-svn: 343093
This removes an int->fp bitcast between the surrounding code and the movmsk. I had already added a hack to combineMOVMSK to try to look through this bitcast to improve the SimplifyDemandedBits there.
But I found an additional issue where the bitcast was preventing combineMOVMSK from being called again after earlier nodes in the DAG are optimized. The bitcast gets revisted, but not the user of the bitcast. By using integer types throughout, the bitcast doesn't get in the way.
llvm-svn: 343046
This is the final (I hope!) problem pattern mentioned in PR37749:
https://bugs.llvm.org/show_bug.cgi?id=37749
We are trying to avoid an AVX1 sinkhole caused by having 256-bit bitwise logic ops but no other 256-bit integer ops.
We've already solved the simple logic ops, but 'andn' is an x86 special. I looked at alternative solutions like
extending the generic DAG combine or trying to wait until the ANDNP node is created, but those are bigger patches
that can over-reach. Ie, splitting to 128-bit does not look like a win in most cases with >1 256-bit op.
The pattern matching is cluttered with bitcasts because of our i64 element canonicalization. For the affected test,
we have this vector-type-legalized sequence:
t29: v8i32 = concat_vectors t27, t28
t30: v4i64 = bitcast t29
t18: v8i32 = BUILD_VECTOR Constant:i32<-1>, Constant:i32<-1>, ...
t31: v4i64 = bitcast t18
t32: v4i64 = xor t30, t31
t9: v8i32 = BUILD_VECTOR Constant:i32<255>, Constant:i32<255>, ...
t34: v4i64 = bitcast t9
t35: v4i64 = and t32, t34
t36: v8i32 = bitcast t35
t37: v4i32 = extract_subvector t36, Constant:i64<0>
t38: v4i32 = extract_subvector t36, Constant:i64<4>
Differential Revision: https://reviews.llvm.org/D52318
llvm-svn: 343008
As suggested by Craig Topper - I'm going to look at cleaning up the RMW sequences instead.
The uops are slightly different to the register variant, so requires a +1uop tweak
llvm-svn: 342969
We're missing quite a bit of data for these instruction, removing the overrides makes this obvious - inconsistent reg/mem variants is a concern as well.
Also, we have Divider resources (HWDivider etc.) but they aren't actually used consistently.
llvm-svn: 342904
Split WriteIMul by size and also by IMUL multiply-by-imm and multiply-by-reg cases.
This removes all the scheduler overrides for gpr multiplies and stops WriteMULH being ignored for BMI2 MULX instructions.
llvm-svn: 342892
Variable Shifts/Rotates using the CL register have different behaviours to the immediate instructions - split accordingly to help remove yet more repeated overrides from the schedule models.
llvm-svn: 342852
Confirmed with Craig Topper - fix a typo that was missing a Port4 uop for ROR*mCL instructions on some Intel models.
Yet another step on the scheduler model cleanup marathon......
llvm-svn: 342846
This is an alternative to https://reviews.llvm.org/D37896. We can't decompose
multiplies generically without a target hook to tell us when it's profitable.
ARM and AArch64 may be able to remove some existing code that overlaps with
this transform.
This extends D52195 and may resolve PR34474:
https://bugs.llvm.org/show_bug.cgi?id=34474
(still an open question about transforming legal vector multiplies, but we
could open another bug report for those)
llvm-svn: 342844
The SandyBridge model was missing schedule values for the RCL/RCR values - instead using the (incredibly optimistic) WriteShift (now WriteRotate) defaults.
I've added overrides with more realistic (slow) values, based on a mixture of Agner/instlatx64 numbers and what later Intel models do as well.
This is necessary to allow WriteRotate to be updated to remove other rotate overrides.
It'd probably be a good idea to investigate a WriteRotateCarry class at some point but its not high priority given the unusualness of these instructions.
llvm-svn: 342842
Despite being rotates, these more modern instructions avoid many of the quirks of the regular x86 rotate instructions and consistently have a schedule closer to shifts.
llvm-svn: 342839
NFCI for now, but it should make it easier to remove a lot of unnecessary overrides in a future commit.
Now that funnel shift intrinsics are coming online we need to get this cleaned up to make vectorization costs from scalar rotate patterns more straightforward.
llvm-svn: 342837
Our lowering that tries to avoid this sign extend can be defeated by the DAG combine folding it with a truncate.
The pattern needs to extend to an v8i32 then truncate back down to v8i16.
llvm-svn: 342830
Summary: Similar to D51893 which was for memcpy
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52063
llvm-svn: 342796
We don't have a vXi8 shift left so we need to bitcast to a vXi16 vector to perform the shift. If we let lowering legalize the vXi8 shift we get an extra and that we don't need and fail to remove.
llvm-svn: 342795
Previously we used SUBREG_TO_REG+MOV32ri. But regular isel was changed recently to use the MOV32ri64 pseudo. Fast isel now does the same.
llvm-svn: 342788
This patch introduces a SchedWriteVariant to describe zero-idiom VXORP(S|D)Yrr
and VANDNP(S|D)Yrr.
This is a follow-up of r342555.
On Jaguar, a VXORPSYrr is 2 macro opcodes. Only one opcode is eliminated at
register-renaming stage. The other opcode has to be executed to set the upper
half of the destination YMM.
Same for VANDNP(S|D)Yrr.
Differential Revision: https://reviews.llvm.org/D52347
llvm-svn: 342728
x86 had 2 versions of peekThroughBitcast. DAGCombiner had 1. Plus, it had a 1-off implementation for the one-use variant.
Move the x86 versions of the code to SelectionDAG, so we don't have different copies of the code.
No functional change intended.
I'm putting this next to isBitwiseNot() because I am planning to use it in there. Another option is next to the
helpers in the ISD namespace (eg, ISD::isConstantSplatVector()). But if there's no good reason for those to be
there, I'd prefer to pull other helpers over to SelectionDAG in follow-up steps.
Differential Revision: https://reviews.llvm.org/D52285
llvm-svn: 342669
Enable enableMultipleCopyHints() on X86.
Original Patch by @jonpa:
While enabling the mischeduler for SystemZ, it was discovered that for some reason a test needed one extra seemingly needless COPY (test/CodeGen/SystemZ/call-03.ll). The handling for that is resulted in this patch, which improves the register coalescing by providing not just one copy hint, but a sorted list of copy hints. On SystemZ, this gives ~12500 less register moves on SPEC, as well as marginally less spilling.
Instead of improving just the SystemZ backend, the improvement has been implemented in common-code (calculateSpillWeightAndHint(). This gives a lot of test failures, but since this should be a general improvement I hope that the involved targets will help and review the test updates.
Differential Revision: https://reviews.llvm.org/D38128
llvm-svn: 342578
As the code comments suggest, these are about splitting, and they
are not necessarily limited to lowering, so that misled me.
There's nothing that's actually x86-specific in these either, so
they might be better placed in a common header so any target can
use them.
llvm-svn: 342575
This patch adds an initial x86 SimplifyDemandedVectorEltsForTargetNode implementation to handle target shuffles.
Currently the patch only decodes a target shuffle, calls SimplifyDemandedVectorElts on its input operands and removes any shuffle that reduces to undef/zero/identity.
Future work will need to integrate this with combineX86ShufflesRecursively, add support for other x86 ops, etc.
NOTE: There is a minor regression that appears to be affecting further (extractelement?) combines which I haven't been able to solve yet - possibly something to do with how nodes are added to the worklist after simplification.
Differential Revision: https://reviews.llvm.org/D52140
llvm-svn: 342564
This patch adds the ability for processor models to describe dependency breaking
instructions.
Different processors may specify a different set of dependency-breaking
instructions.
That means, we cannot assume that all processors of the same target would use
the same rules to classify dependency breaking instructions.
The main goal of this patch is to provide the means to describe dependency
breaking instructions directly via tablegen, and have the following
TargetSubtargetInfo hooks redefined in overrides by tabegen'd
XXXGenSubtargetInfo classes (here, XXX is a Target name).
```
virtual bool isZeroIdiom(const MachineInstr *MI, APInt &Mask) const {
return false;
}
virtual bool isDependencyBreaking(const MachineInstr *MI, APInt &Mask) const {
return isZeroIdiom(MI);
}
```
An instruction MI is a dependency-breaking instruction if a call to method
isDependencyBreaking(MI) on the STI (TargetSubtargetInfo object) evaluates to
true. Similarly, an instruction MI is a special case of zero-idiom dependency
breaking instruction if a call to STI.isZeroIdiom(MI) returns true.
The extra APInt is used for those targets that may want to select which machine
operands have their dependency broken (see comments in code).
Note that by default, subtargets don't know about the existence of
dependency-breaking. In the absence of external information, those method calls
would always return false.
A new tablegen class named STIPredicate has been added by this patch to let
processor models classify instructions that have properties in common. The idea
is that, a MCInstrPredicate definition can be used to "generate" an instruction
equivalence class, with the idea that instructions of a same class all have a
property in common.
STIPredicate definitions are essentially a collection of instruction equivalence
classes.
Also, different processor models can specify a different variant of the same
STIPredicate with different rules (i.e. predicates) to classify instructions.
Tablegen backends (in this particular case, the SubtargetEmitter) will be able
to process STIPredicate definitions, and automatically generate functions in
XXXGenSubtargetInfo.
This patch introduces two special kind of STIPredicate classes named
IsZeroIdiomFunction and IsDepBreakingFunction in tablegen. It also adds a
definition for those in the BtVer2 scheduling model only.
This patch supersedes the one committed at r338372 (phabricator review: D49310).
The main advantages are:
- We can describe subtarget predicates via tablegen using STIPredicates.
- We can describe zero-idioms / dep-breaking instructions directly via
tablegen in the scheduling models.
In future, the STIPredicates framework can be used for solving other problems.
Examples of future developments are:
- Teach how to identify optimizable register-register moves
- Teach how to identify slow LEA instructions (each subtarget defining its own
concept of "slow" LEA).
- Teach how to identify instructions that have undocumented false dependencies
on the output registers on some processors only.
It is also (in my opinion) an elegant way to expose knowledge to both external
tools like llvm-mca, and codegen passes.
For example, machine schedulers in LLVM could reuse that information when
internally constructing the data dependency graph for a code region.
This new design feature is also an "opt-in" feature. Processor models don't have
to use the new STIPredicates. It has all been designed to be as unintrusive as
possible.
Differential Revision: https://reviews.llvm.org/D52174
llvm-svn: 342555
This is an alternative to D37896. I don't see a way to decompose multiplies
generically without a target hook to tell us when it's profitable.
ARM and AArch64 may be able to remove some duplicate code that overlaps with
this transform.
As a first step, we're only getting the most clear wins on the vector examples
requested in PR34474:
https://bugs.llvm.org/show_bug.cgi?id=34474
As noted in the code comment, it's likely that the x86 constraints are tighter
than necessary, but it may not always be a win to replace a pmullw/pmulld.
Differential Revision: https://reviews.llvm.org/D52195
llvm-svn: 342554
The 0x800 bit in @feat.00 needs to be set in order to make LLD pick up
the .gfid$y table. I believe this is fine to set even if we don't emit
the instrumentation.
We haven't emitted @feat.00 on 64-bit before. I see that MSVC does emit
it, but I'm not entirely sure what the default value should be. I went
with zero since that seems as safe as not emitting the symbol in the
first place.
Differential Revision: https://reviews.llvm.org/D52235
llvm-svn: 342532
Summary:
The IR reference for the `byval` attribute states:
```
This indicates that the pointer parameter should really be passed by value
to the function. The attribute implies that a hidden copy of the pointee is
made between the caller and the callee, so the callee is unable to modify
the value in the caller. This attribute is only valid on LLVM pointer arguments.
```
However, on Win64, this attribute is unimplemented and the raw pointer is
passed to the callee instead. This is problematic, because frontend authors
relying on the implicit hidden copy (as happens for every other calling
convention) will see the passed value silently (if mutable memory) or
loudly (by means of a crash) modified because the callee treats the
location as scratch memory space it is allowed to mutate.
At this point, it's worth taking a step back to understand the context.
In most calling conventions, aggregates that are too large to be passed
in registers, instead get *copied* to the stack at a fixed (computable
from the signature) offset of the stack pointer. At the LLVM, we hide
this hidden copy behind the byval attribute. The caller passes a pointer
to the desired data and the callee receives a pointer, but these pointers
are not the same. In particular, the pointer that the callee receives
points to temporary stack memory allocated as part of the call lowering.
In most calling conventions, this pointer is never realized in registers
or memory. The temporary memory is simply defined by an implicit
offset from the stack pointer at function entry.
Win64, uniquely, works differently. The structure is still passed in
memory, but instead of being stored at an implicit memory offset, the
caller computes a pointer to the temporary memory and passes it to
the callee as a regular pointer (taking up a register, or if all
registers are taken up, an additional stack slot). Presumably, this
was done to allow eliding the copy when passing aggregates through
several functions on the stack.
This explains why ignoring the `byval` attribute mostly works on Win64.
The argument simply gets passed as a pointer and as long as we're ok
with the callee trampling all over that memory, there are no ill effects.
However, it does contradict the documentation of the `byval` attribute
which specifies that there is to be an implicit copy.
Frontends can of course work around this by never emitting the `byval`
attribute for Win64 and creating `alloca`s for the requisite temporary
stack slots (and that does appear to be what frontends are doing).
However, the presence of the `byval` attribute is not a trap for
frontend authors, since it seems to work, but silently modifies the
passed memory contrary to documentation.
I see two solutions:
- Disallow the `byval` attribute in the verifier if using the Win64
calling convention.
- Make it work by simply emitting a temporary stack copy as we would
with any other calling convention (frontends can of course always
not use the attribute if they want to elide the copy).
This patch implements the second option (make it work), though I would
be fine with the first also.
Ref: https://github.com/JuliaLang/julia/issues/28338
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51842
llvm-svn: 342402
For constant non-uniform cases we'll never introduce more and/andn/or selects than already occur in generic pre-SSE41 ISD::SRL lowering.
llvm-svn: 342352
https://bugs.llvm.org/show_bug.cgi?id=38949
It's not clear to me that we even need a one-use check in this fold.
Ie, 2 independent loads might be better than a load+dependent shuffle.
Note that the existing re-use tests are not affected. We actually do form a
broadcast node in those tests now because there's no extra use of the
insert_subvector node in those cases. But something later in isel pattern
matching decides that it is not worth using a broadcast for the full load in
those tests:
Legalized selection DAG: %bb.0 'test_broadcast_2f64_4f64_reuse:'
t7: v2f64,ch = load<(load 16 from %ir.p0)> t0, t2, undef:i64
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t10: ch = store<(store 16 into %ir.p1)> t7:1, t7, t4, undef:i64
t18: v4f64 = insert_subvector undef:v4f64, t7, Constant:i64<0>
t20: v4f64 = insert_subvector t18, t7, Constant:i64<2>
Becomes:
t7: v2f64,ch = load<(load 16 from %ir.p0)> t0, t2, undef:i64
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t10: ch = store<(store 16 into %ir.p1)> t7:1, t7, t4, undef:i64
t21: v4f64 = X86ISD::SUBV_BROADCAST t7
ISEL: Starting selection on root node: t21: v4f64 = X86ISD::SUBV_BROADCAST t7
...
Created node: t27: v4f64 = INSERT_SUBREG IMPLICIT_DEF:v4f64, t7, TargetConstant:i32<7>
Morphed node: t21: v4f64 = VINSERTF128rr t27, t7, TargetConstant:i8<1>
llvm-svn: 342347
Summary: This unfortunately adds a move, but isn't that better than going to the int domain and back?
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52134
llvm-svn: 342327
Summary:
MOVMSK only care about the sign bit so we don't need the setcc to fill the whole element with 0s/1s. We can just shift the bit we're looking for into the sign bit. This saves a constant pool load.
Inspired by PR38840.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D52121
llvm-svn: 342326
Attempt to lower a shuffle as an unpack of elements from two inputs followed by a single-input (wider) permutation.
As long as the permutation is wider this is a win - there may be some circumstances where same size permutations would also be useful but I've left that for future work.
Differential Revision: https://reviews.llvm.org/D52043
llvm-svn: 342257
When replacing a named register input to the appropriately sized
sub/super-register. In the case of a 64-bit value being assigned to a
register in 32-bit mode, match GCC's assignment.
Reviewers: eli.friedman, craig.topper
Subscribers: nickdesaulniers, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D51502
llvm-svn: 342175
Summary:
Previously we type legalized v2i32 div/rem by promoting to v2i64. But we don't support div/rem of vectors so op legalization would then scalarize it using i64 scalar ops since it doesn't know about the original promotion. 64-bit scalar divides on Intel hardware are known to be slow and in 32-bit mode they require a libcall.
This patch switches type legalization to do the scalarizing itself using i32.
It looks like the division by power of 2 optimization is still kicking in and leaving the code as a vector. The division by other constant optimization doesn't kick in pre type legalization since it ignores illegal types. And previously, after type legalization we scalarized the v2i64 since we don't have v2i64 MULHS/MULHU support.
Another option might be to widen v2i32 to v4i32 so we could do division by constant optimizations, but we'd have to be careful to only do that for constant divisors or we risk scalaring to 4 scalar divides.
Reviewers: RKSimon, spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51325
llvm-svn: 342114
There's no advantage to this instruction unless you need to avoid touching other flag bits. It's encoding is longer, it can't fold an immediate, it doesn't write all the flags.
I don't think gcc will generate this instruction either.
Fixes PR38852.
Differential Revision: https://reviews.llvm.org/D51754
llvm-svn: 342059
Summary:
In GNUX23, is64BitMode returns true, but pointers are 32-bits. So we shouldn't copy pointer values into RSI/RDI since the widths don't match.
Fixes PR38865 despite what the title says. I think the llvm_unreachable in the copyPhysReg code tricked the optimizer and made the fatal error trigger.
Reviewers: rnk, efriedma, MatzeB, echristo
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51893
llvm-svn: 342015
In r337348, I changed lowering to prefer X86ISD::UNPCKL/UNPCKH opcodes over MOVLHPS/MOVHLPS for v2f64 {0,0} and {1,1} shuffles when we have SSE2. This enabled the removal of a bunch of weirdly bitcasted isel patterns in r337349. To avoid changing the tests I placed a gross hack in isel to still emit movhlps instructions for fake unary unpckh nodes. A similar hack was not needed for unpckl and movlhps because we do execution domain switching for those. But unpckh and movhlps have swapped operand order.
This patch removes the hack.
This is a code size increase since unpckhpd requires a 0x66 prefix and movhlps does not. But if that's a big concern we should be using movhlps for all unpckhpd opcodes and let commuteInstruction turnit into unpckhpd when its an advantage.
Differential Revision: https://reviews.llvm.org/D49499
llvm-svn: 341973
GNUX32 uses 32-bit pointers despite is64BitMode being true. So we should use EAX to return the value.
Fixes ones of the failures from PR38865.
Differential Revision: https://reviews.llvm.org/D51940
llvm-svn: 341972
MOVMSKPS and MOVMSKPD both take FP types, but likely the operations before it are on integer types with just a int->fp bitcast between them. If the bitcast isn't used by anything else and doesn't change the element width we can look through it to simplify the integer ops.
llvm-svn: 341915
I'm having a hard time finding a test case for this, but we should be consistent here. The fact that we canonicalize all zeros and all ones constants to vXi32 and all other constants to loads makes this hard to hit the easy DAG combine infinite loop we get for some of the other types.
llvm-svn: 341859
We have isel patterns for v4i32/v4f64 that artificially widen to v8i32/v8f64 so just use that.
If x86-experimental-vector-widening-legalization is enabled, we don't need any custom legalization and can just return. I've modified the test RUN lines to cover this case.
llvm-svn: 341765
Summary:
This patch allows vectors with a power of 2 number of elements and i8/i16 element type to select paddus/psubus instructions. ReplaceNodeResults has been updated to custom widen these operations up to 128 bits like we already do for PAVG.
Another step towards fixing PR38691
Reviewers: RKSimon, spatel
Reviewed By: RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51818
llvm-svn: 341753
The generic type legalizer will scalarize vXi1 instructions getting rid of the vector entirely. Creating wider vector instructions is just going to prevent that.
llvm-svn: 341705
The type legalizer will try to scalarize this and fail.
It looks like there's some other v1iX oddities out there too since we still generated some vector instructions.
llvm-svn: 341704
Similar to what was recently done for addcarry/subborrow and has been done for rdrand/rdseed for a while. It's better to use two results and an explicit store in IR when the store isn't part of the semantics of the instruction. This allows store->load forwarding to happen in the middle end. Or the store to be removed if its never loaded.
Differential Revision: https://reviews.llvm.org/D51803
llvm-svn: 341698
We should represent the store directly in IR instead. This gives the middle end a chance to remove it if it can see a load from the same address.
Differential Revision: https://reviews.llvm.org/D51769
llvm-svn: 341677
Previously we only handled loads in operand 0, but nothing guarantees the load will be operand 0 for commutable operations.
Differential Revision: https://reviews.llvm.org/D51768
llvm-svn: 341675
ADC is commutable and the load could be in either operand, but we were only checking operand 0.
Ideally we'd mark X86adc_flag as commutable and tablegen would automatically do this, but the EFLAGS register mention is preventing it.
llvm-svn: 341606
The peephole pass likely gets this normally, but we should be doing it during isel.
Ideally we'd just make the X86adc_flag pattern SDNPCommutable, but the tablegen doesn't handle that when one of the operands is a register reference.
llvm-svn: 341596
This basically reverts a change made in r336217, but improves the text of the error message for not allowing IP-relative addressing in 32-bit mode.
Fixes PR38826.
Patch by Iain Sandoe.
llvm-svn: 341512
This removes the FrameAccess struct that was added to the interface
in D51537, since the PseudoValue from the MachineMemoryOperand
can be safely casted to a FixedStackPseudoSourceValue.
Reviewers: MatzeB, thegameg, javed.absar
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51617
llvm-svn: 341454
On Windows, if shouldAssumeDSOLocal returns false, it's either a
dllimport reference, or a reference that we should treat as non-local
and create a stub for.
Clean up AArch64Subtarget::ClassifyGlobalReference a little while
touching the flag handling relating to dllimport.
Differential Revision: https://reviews.llvm.org/D51590
llvm-svn: 341402
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
implementing the proposed mitigation technique described in the original
design document.
The idea is to check after calls that the return address used to arrive
at that location is in fact the correct address. In the event of
a mis-predicted return which reaches a *valid* return but not the
*correct* return, this will detect the mismatch much like it would
a mispredicted conditional branch.
This is the last published attack vector that I am aware of in the
Spectre v1 space which is not mitigated by SLH+retpolines. However,
don't read *too* much into that: this is an area of ongoing research
where we expect more issues to be discovered in the future, and it also
makes no attempt to mitigate Spectre v4. Still, this is an important
completeness bar for SLH.
The change here is of course delightfully simple. It was predicated on
cutting support for post-instruction symbols into LLVM which was not at
all simple. Many thanks to Hal Finkel, Reid Kleckner, and Justin Bogner
who helped me figure out how to do a bunch of the complex changes
involved there.
Differential Revision: https://reviews.llvm.org/D50837
llvm-svn: 341358
retpolines.
This implements the core design of tracing the intended target into the
target, checking it, and using that to update the predicate state. It
takes advantage of a few interesting aspects of SLH to make it a bit
easier to implement:
- We already split critical edges with conditional branches, so we can
assume those are gone.
- We already unfolded any memory access in the indirect branch
instruction itself.
I've left hard errors in place to catch if any of these somewhat subtle
invariants get violated.
There is some code that I can factor out and share with D50837 when it
lands, but I didn't want to couple landing the two patches, so I'll do
that in a follow-up cleanup commit if alright.
Factoring out the code to handle different scenarios of materializing an
address remains frustratingly hard. In a bunch of cases you want to fold
one of the cases into an immediate operand of some other instruction,
and you also have both symbols and basic blocks being used which require
different methods on the MI builder (and different operand kinds).
Still, I'll take a stab at sharing at least some of this code in
a follow-up if I can figure out how.
Differential Revision: https://reviews.llvm.org/D51083
llvm-svn: 341356
A ReadAdvance was incorrectly added to the SchedReadWrite list associated with
the following SSE instructions:
sqrtss
sqrtsd
rsqrtss
rcpss
As a consequence, a wrong operand latency was computed for the register operand
used as the base address of the folded load operand.
This patch removes the wrong ReadAdvance, and updates the llvm-mca test cases.
There is still a problem with correctly modeling partial register writes on XMM
registers This other problem is currently tracked here:
https://bugs.llvm.org/show_bug.cgi?id=38813
Differential Revision: https://reviews.llvm.org/D51542
llvm-svn: 341326
Also adjust some of dsymutil's headers to put the header guards at the top,
otherwise the compiler will not recognize them as header guards.
llvm-svn: 341323
For instructions that spill/fill to and from multiple frame-indices
in a single instruction, hasStoreToStackSlot and hasLoadFromStackSlot
should return an array of accesses, rather than just the first encounter
of such an access.
This better describes FI accesses for AArch64 (paired) LDP/STP
instructions.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar, MatzeB
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D51537
llvm-svn: 341301
These intrinsics use the same implementation as PTEST intrinsics, but use vXi1 vectors.
New clang builtins will be accompanying them shortly.
llvm-svn: 341259
This patch recognizes shuffles that shift elements and fill with zeros. I've copied and modified the shift matching code we use for normal vector registers to do this. I'm not sure if there's a good way to share more of this code without making the existing function more complex than it already is.
This will be used to enable kshift intrinsics in clang.
Differential Revision: https://reviews.llvm.org/D51401
llvm-svn: 341227
The presence of a ReadAdvance for input operand #0 is problematic
because it changes the input latency of the register used as the base address
for the folded load.
A broadcast cannot start executing if the load address hasn't been computed yet.
In the llvm-mca example, the VBROADCASTSS is dependent on the address generated
by the LEAQ. That means, it cannot start until LEAQ reaches the write-back
stage. If we apply ReadAdvance, then we wrongly assume that the load can start 3
cycles in advance.
Differential Revision: https://reviews.llvm.org/D51534
llvm-svn: 341222
This patch fixes the number of micro opcodes, and processor resource cycles for
the following AVX instructions:
vinsertf128rr/rm
vperm2f128rr/rm
vbroadcastf128
Tests have been regenerated using the usual scripts in the llvm/utils directory.
Differential Revision: https://reviews.llvm.org/D51492
llvm-svn: 341185
These stubs should never be emitted for internal symbols, and
nothing in AsmPrinter ever actually use this value when producing
the stubs for COFF anyway.
llvm-svn: 341177
This assert tried to check that AND constants are only on the RHS. But its possible for both operands to be constants if one is opaque which will prevent the AND from being constant folded.
Fixes PR38771
llvm-svn: 341102
..Move all target-dependent checks into new isCopyInstrImpl method.
This change allows us to treat MoveReg-type instructions and generic
COPY instruction in the same way
Differential Revision: https://reviews.llvm.org/D49913
llvm-svn: 341072
We now only add +64bit to the CPU string for "generic" CPU. All other CPU names are assumed to have the feature flag already set if they support 64-bit. I've remove the implies from CMPXCHG8 so that Feature64Bit only comes in via CPUs or user passing -mattr=+64bit.
I've changed the assert to a report_fatal_error so it's not lost in Release builds.
The test updates are to fix things that tripped the new error.
Differential Revision: https://reviews.llvm.org/D51231
llvm-svn: 341022
Variables declared with the dllimport attribute are accessed via a
stub variable named __imp_<var>. In MinGW configurations, variables that
aren't declared with a dllimport attribute might still end up imported
from another DLL with runtime pseudo relocs.
For x86_64, this avoids the risk that the target is out of range
for a 32 bit PC relative reference, in case the target DLL is loaded
further than 4 GB from the reference. It also avoids having to make the
text section writable at runtime when doing the runtime fixups, which
makes it worthwhile to do for i386 as well.
Add stub variables for all dso local data references where a definition
of the variable isn't visible within the module, since the DLL data
autoimporting might make them imported even though they are marked as
dso local within LLVM.
Don't do this for variables that actually are defined within the same
module, since we then know for sure that it actually is dso local.
Don't do this for references to functions, since there's no need for
runtime pseudo relocations for autoimporting them; if a function from
a different DLL is called without the appropriate dllimport attribute,
the call just gets routed via a thunk instead.
GCC does something similar since 4.9 (when compiling with -mcmodel=medium
or large; from that version, medium is the default code model for x86_64
mingw), but only for x86_64.
Differential Revision: https://reviews.llvm.org/D51288
llvm-svn: 340942
Noticed while looking at D49562 codegen - we can avoid a large constant mask load and a slow VPBLENDVB select op by using VPBLENDW+VPBLENDD instead.
TODO: As discussed on the patch, we should investigate adding VPBLENDVB handling to target shuffle combining as well, that will allow us to extend this to VPBLENDW+VPBLENDW+VPBLENDD.
Differential Revision: https://reviews.llvm.org/D50074
llvm-svn: 340913
These are intrinsics for supporting kadd builtins in clang. These builtins are already in gcc to implement intrinsics from icc. Though they are missing from the Intel Intrinsics Guide.
This instruction adds two mask registers together as if they were scalar rather than a vXi1. We might be able to get away with a bitcast to scalar and a normal add instruction, but that would require DAG combine smarts in the backend to recoqnize add+bitcast. For now I'd prefer to go with the easiest implementation so we can get these builtins in to clang with good codegen.
Differential Revision: https://reviews.llvm.org/D51370
llvm-svn: 340869
These instructions were added on the PentiumPro along with CMOV.
This was already comprehended by the lowering process which should emit an alternate sequence using FCOM and FNSTW. This just makes it an explicit error if that doesn't work for some reason.
llvm-svn: 340844
This patch creates the shift mask and actual shift using the vXi16 vector shift ops.
Differential Revision: https://reviews.llvm.org/D51263
llvm-svn: 340813
We're using a 256-bit PACKUS to do the truncation, but that instruction operates on 128-bit lanes. So previously we shuffled first to rearrange the lanes. But that requires 2 shuffles. Instead we can shuffle after the PACKUS using a single VPERMQ. This matches what our normal LowerTRUNCATE code does when it uses PACKUS.
Differential Revision: https://reviews.llvm.org/D51284
llvm-svn: 340757
InstCombine mucks these up a bit. So we need to do some additional pattern matching to fix it. There are a still a few special cases not handled, but this covers the general case.
Differential Revision: https://reviews.llvm.org/D50952
llvm-svn: 340756
vXi32 support was recently moved from LowerMUL_LOHI to LowerMULH.
This commit shares the getOperand calls, switches both to use common IsSigned flag, and hoists the NumElems/NumElts variable.
llvm-svn: 340720
Summary: This was inheriting the cost from the AVX table, but should be legal under AVX512.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51267
llvm-svn: 340708
Summary:
Previously most CPUs inherited cmov support through Feature64Bit(or FeatureCMPXCHG16HB implying Feature64Bit) or FeatureSSE1.
This has the surprising side effect that -mattr=-cmov causes an assert to fire in 64-bit mode because it clears the Feature64Bit. Or in 32-bit mode, -mattr=-cmov disables any sse/avx features which seems surprising.
This patch removes the implication and instead updates hasCMOV in X86Subtarget to check SSE1 or is64Bit in addition to the regular cmov flag. This should keep most things working the way they did before. I don't believe there is a way to specific "-cmov" directly from clang so this should only effect our lower level tools.
This does stop -mattr=cx16(cmpxchg16b) from implying cmov is enabled via the 64bit flag as you can see from one of the changed tests. But that was a 32-bit test so I don't know why it enabled cx16 anyway.
For the other test I had to add -sse to override the new sse check in hasCMOV.
Reviewers: RKSimon, DavidKreitzer, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51228
llvm-svn: 340707
Summary: This matches gcc and one cpuid dump I found online. Given that these are considered 7th generation x86 CPU it seems likely they support cmov since cmov was added by Intel in their 6th generation.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51264
llvm-svn: 340706
I noticed this along with the patterns in D51125, but when the index is variable,
we don't convert insertelement into a build_vector.
For x86, that means these get expanded at legalization time into the loading/spilling
code that we see in the tests. I think it's always better to avoid going to memory on
these, and we get the optimal 'broadcast' if it's available.
I suspect other targets may want to look at enabling the hook. AArch64 and AMDGPU have
regression tests that would be affected (although I did not check what would happen in
those cases). In the most basic cases shown here, AArch64 would probably do much
better with a splat.
Differential Revision: https://reviews.llvm.org/D51186
llvm-svn: 340705
Summary:
The only time vector SMUL_LOHI/UMUL_LOHI nodes are created is during division/remainder lowering. If its created before op legalization, generic DAGCombine immediately turns that SMUL_LOHI/UMUL_LOHI into a MULHS/MULHU since only the upper half is used. That node will stick around through vector op legalization and will be turned back into UMUL_LOHI/SMUL_LOHI during op legalization. It will then be custom lowered by the X86 backend. Due to this two step lowering the vector shuffles created by the custom lowering get legalized after their inputs rather than before. This prevents the shuffles from being combined with any build_vector of constants.
This patch uses changes vXi32 to use MULHS/MULHU instead. This is what the later DAG combine did anyway. But by skipping the change back to UMUL_LOHI/SMUL_LOHI we lower it before any constant BUILD_VECTORS. This allows the vector_shuffle creation to constant fold with the build_vectors. This accounts for the test changes here.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51254
llvm-svn: 340690
Summary:
Previously the value being stored is the last operand in SDNode. This causes the type legalizer to visit the mask operand before the value operand. The type legalizer was more complicated because of this since we want the type of the value to drive the decisions.
This patch moves the value to be the first operand so we visit it first during type legalization. It also simplifies the type legalization code accordingly.
X86 is currently the only in tree target that uses this SDNode. Not sure if there are any users out of tree.
Reviewers: RKSimon, delena, hfinkel, eli.friedman
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50402
llvm-svn: 340689
This is a preliminary step for a preliminary step for D50992.
I noticed that x86 often misses chances to load a scalar directly
into a vector register.
So this patch is just allowing more of those cases to match a
broadcast op in lowerBuildVectorAsBroadcast(). The old code comment
said it doesn't make sense to use a broadcast when we're loading a
single element and everything else is undef, but I think that's the
best case in the improved tests in insert-loaded-scalar.ll. We avoid
scalar-to-vector-register move and/or less efficient shuffling.
Note that there are some existing types that were already producing
a broadcast, but that happens semi-accidentally. Ie, it's not
happening as part of lowerBuildVectorAsBroadcast(). The build vector
gets expanded into load + shuffle, and then shuffle lowering produces
the broadcast.
Description of the other test diffs:
1. avx-basic.ll - replacing load+shufle is a win.
2. sse3-avx-addsub-2.ll - vmovddup vs. vbroadcastss is neutral
3. sse41.ll - don't care - we convert that intrinsic to generic IR now, so this test is deprecated
4. vector-shuffle-128-v8.ll / vector-shuffle-256-v16.ll - pshufb alternatives with an extra instruction are not obviously bad
Differential Revision: https://reviews.llvm.org/D51125
llvm-svn: 340685
This adds a new method to ELFObjectFileBase that returns the symbols and addresses of PLT entries.
This design was suggested by pcc and eugenis in https://reviews.llvm.org/D49383.
Differential Revision: https://reviews.llvm.org/D50203
llvm-svn: 340610
The commit that added this functionality:
rL322957
may be causing/exposing a miscompile in PR38648:
https://bugs.llvm.org/show_bug.cgi?id=38648
so allow enabling/disabling to make debugging easier.
llvm-svn: 340540
subtarget features for indirect calls and indirect branches.
This is in preparation for enabling *only* the call retpolines when
using speculative load hardening.
I've continued to use subtarget features for now as they continue to
seem the best fit given the lack of other retpoline like constructs so
far.
The LLVM side is pretty simple. I'd like to eventually get rid of the
old feature, but not sure what backwards compatibility issues that will
cause.
This does remove the "implies" from requesting an external thunk. This
always seemed somewhat questionable and is now clearly not desirable --
you specify a thunk the same way no matter which set of things are
getting retpolines.
I really want to keep this nicely isolated from end users and just an
LLVM implementation detail, so I've moved the `-mretpoline` flag in
Clang to no longer rely on a specific subtarget feature by that name and
instead to be directly handled. In some ways this is simpler, but in
order to preserve existing behavior I've had to add some fallback code
so that users who relied on merely passing -mretpoline-external-thunk
continue to get the same behavior. We should eventually remove this
I suspect (we have never tested that it works!) but I've not done that
in this patch.
Differential Revision: https://reviews.llvm.org/D51150
llvm-svn: 340515
Previously we asumed a vector reduction add is part of a loop and one of the input is a phi. But the code in SelectionDAGBuilder that sets vector reduction flag handles more cases than that. It just requires that the use chain ends in a horizontal reduction. And there are no other uses. This means it can handle unrolled reduction loops.
If the initial value of the reduction was 0, an unrolled loop would begin with a vector reduction add that has two sad inputs. Previously we would only transform one side of the add, but for this case we need to transform both sides.
I've created a lambda to reuse some of the code for both sides. And fixed the variables names to remove reference to "phi".
Differential Revision: https://reviews.llvm.org/D50817
llvm-svn: 340478
Inspired by what AArch64 does for shifts, this patch attempts to replace shift amounts with neg if we can.
This is done directly as part of isel so its as late as possible to avoid breaking some BZHI patterns since those patterns need an unmasked (32-n) to be correct.
To avoid manual load folding and custom instruction selection for the negate. I've inserted new nodes in the DAG above the shift node in topological order.
Differential Revision: https://reviews.llvm.org/D48789
llvm-svn: 340441
When the key is not already in the map, the access operator[] creates an empty value and grows the map.
Resizing a map is very slow, so this needs to be avoided.
Found with csmith + asserts.
May help with
https://bugs.llvm.org/show_bug.cgi?id=25843
Patch by Tom Rix.
Differential Revision: https://reviews.llvm.org/D50780
llvm-svn: 340434
This adds the plumbing for the Tiny code model for the AArch64 backend. This,
instead of loading addresses through the normal ADRP;ADD pair used in the Small
model, uses a single ADR. The 21 bit range of an ADR means that the code and
its statically defined symbols need to be within 1MB of each other.
This makes it mostly interesting for embedded applications where we want to fit
as much as we can in as small a space as possible.
Differential Revision: https://reviews.llvm.org/D49673
llvm-svn: 340397
Summary:
So far, `isReturn` property is used to mean both a return instruction
from a functon and the end of an EH scope, a scope that starts with a EH
scope entry BB and ends with a catchret or a cleanupret instruction.
Because WinEH uses funclets, all EH-scope-ending instructions are also
real return instruction from a function. But for wasm, they only serve
as the end marker of an EH scope but not a return instruction that
exits a function. This mismatch caused incorrect prolog and epilog
generation in wasm EH scopes. This patch fixes this.
This patch is in the same vein with rL333045, which splits
`MachineBasicBlock::isEHFuncletEntry` into `isEHFuncletEntry` and
`isEHScopeEntry`.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50653
llvm-svn: 340325
Most of these shifts are extended to vXi16 so we don't gain anything from forcing another round of generic shift lowering - we know these extended cases are legal constant splat shifts.
llvm-svn: 340307
Due to some splat handling code in getVectorShuffle, its possible for NewV1/NewV2 to have their mask modified from what is requested. This can lead to cycles being created in the DAG.
This patch examines the returned mask and makes sure its different. Long term we may need to look closer at that splat code in getVectorShuffle, or add more splat awareness to getVectorShuffle.
Fixes PR38639
Differential Revision: https://reviews.llvm.org/D50981
llvm-svn: 340214
We can safely avoid interfering with the subus combine if both inputs are freely truncatable. Either both extends, or an extend and a constant vector.
Differential Revision: https://reviews.llvm.org/D50878
llvm-svn: 340212
We were basically assuming only one operand of the compare could be an ADD node and using that to swap operands. But we can have a normal add followed by a saturing add.
This rewrites the canonicalization to just be based on the condition code.
llvm-svn: 340134
The code already support 128 and 256 and even knows to split 256 for AVX1. So we really just needed to stop looking for specific VTs and subtarget features and just look for legal VTs with i8/i16 elements.
While there, add some curly braces around outer if statement bodies that contain only another if. It makes all the closing curly braces look more regular.
llvm-svn: 340128
Extending the concept introduced in D49562, this patch lowers constant vXi8 ISD::SRL/ISD::SRA by zero/sign extending to vXi16 and using PMULLW and then truncating the high 8 bits of the result.
Differential Revision: https://reviews.llvm.org/D50781
llvm-svn: 340062
isOnlyUserOf is a little heavier because it allows the node to be used multiple times by the other node. In this case we are looking at a truncate which only has one operand so we know it can only use it once. Thus hasOneUse is better.
llvm-svn: 340059
test/CodeGen/X86/shadow-stack.ll has the following machine verifier
errors:
```
*** Bad machine code: Using a killed virtual register ***
- function: bar
- basic block: %bb.6 entry (0x7fdc81857818)
- instruction: %3:gr64 = MOV64rm killed %2:gr64, 1, $noreg, 8, $noreg
- operand 1: killed %2:gr64
*** Bad machine code: Using a killed virtual register ***
- function: bar
- basic block: %bb.6 entry (0x7fdc81857818)
- instruction: $rsp = MOV64rm killed %2:gr64, 1, $noreg, 16, $noreg
- operand 1: killed %2:gr64
*** Bad machine code: Virtual register killed in block, but needed live out. ***
- function: bar
- basic block: %bb.2 entry (0x7fdc818574f8)
Virtual register %2 is used after the block.
```
The fix here is to only copy the machine operand's register without the
kill flags for all the instructions except the very last one of the
sequence.
I had to insert dummy PHIs in the test case to force the NoPHI function
property to be set to false. More on this here: https://llvm.org/PR38439
Differential Revision: https://reviews.llvm.org/D50260
llvm-svn: 340033
Normally the peephole pass converts EXTRACT_SUBREG to COPY instructions. But we're after peephole so we can't rely on it to clean these up.
To fix this, the eflags pass now emits a COPY with a subreg input.
I also noticed that in 32-bit mode we need to constrain the input to the copy to ensure the subreg is valid. Otherwise we'll fail verify-machineinstrs
Differential Revision: https://reviews.llvm.org/D50656
llvm-svn: 339945
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
Summary:
This prefix was added in r333421, and it changed our dumper output to
say things like "CVRegEAX" instead of just "EAX". That's a functional
change that I'd rather avoid.
I tested GCC, Clang, and MSVC, and all of them support #pragma
push_macro. They don't issue warnings whem the macro is not defined
either.
I don't have a Mac so I can't test the real termios.h header, but I
looked at the termios.h sources online and looked for other conflicts.
I saw only the CR* macros, so those are the ones we work around.
Reviewers: zturner, JDevlieghere
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D50851
llvm-svn: 339907
Allow the comparison of x86 registers in the evaluation of assembler
directives. This generalizes and simplifies the extension from r334022
to catch another case found in the Linux kernel.
Reviewers: rnk, void
Reviewed By: rnk
Subscribers: hiraditya, nickdesaulniers, llvm-commits
Differential Revision: https://reviews.llvm.org/D50795
llvm-svn: 339895
When compiling with /arch:AVX512 and optimizations turned on,
we could crash while emitting debug info because we did not
have CodeView register constants for the AVX 512 register
set defined. This patch defines them.
Differential Revision: https://reviews.llvm.org/D50819
llvm-svn: 339893
a shorter name ('x86-slh') for the internal flags and pass name.
Without this, you can't use the -stop-after or -stop-before
infrastructure. I seem to have just missed this when originally adding
the pass.
The shorter name solves two problems. First, the flag names were ...
really long and hard to type/manage. Second, the pass name can't be the
exact same as the flag name used to enable this, and there are already
some users of that flag name so I'm avoiding changing it unnecessarily.
llvm-svn: 339836
To lower this we now create a new V1 containing the low half of both sources and a new V2 containing the upper half of both sources. Then we created a repeated lane shuffle of those new sources to create the final result.
This fixes PR35833
Differential Revison: https://reviews.llvm.org/D41794
llvm-svn: 339818
AVX512 added new versions of these intrinsics that take a rounding mode. If the rounding mode is 4 the new intrinsics are equivalent to the old intrinsics.
The AVX512 intrinsics were being lowered to ISD opcodes, but the legacy SSE intrinsics were left as intrinsics. This resulted in the AVX512 instructions needing separate patterns for the ISD opcodes and the legacy SSE intrinsics.
Now we convert SSE intrinsics and AVX512 intrinsics with rounding mode 4 to the same ISD opcode so we can share the isel patterns.
llvm-svn: 339749
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
This patch removes redundant template argument `TargetName` from TIIPredicate.
Tablegen can always infer the target name from the context. So we don't need to
force users of TIIPredicate to always specify it.
This allows us to better modularize the tablegen class hierarchy for the
so-called "function predicates". class FunctionPredicateBase has been added; it
is currently used as a building block for TIIPredicates. However, I plan to
reuse that class to model other function predicate classes too (i.e. not just
TIIPredicates). For example, this can be a first step towards implementing
proper support for dependency breaking instructions in tablegen.
This patch also adds a verification step on TIIPredicates in tablegen.
We cannot have multiple TIIPredicates with the same name. Otherwise, this will
cause build errors later on, when tablegen'd .inc files are included by cpp
files and then compiled.
Differential Revision: https://reviews.llvm.org/D50708
llvm-svn: 339706
rL339686 added the case where a faux shuffle might have repeated shuffle inputs coming from either side of the OR().
This patch improves the insertion of the inputs into the source ops lists to account for this, as well as making it trivial to add support for shuffles with more than 2 inputs in the future.
llvm-svn: 339696
Simon Pilgrim