NFC. Renames the variable in the dpp input operand generators
from DstRC to OldRC, because that is what it actually sets.
Also documents the importance of setting HasModifiers = 0 in the
dpp8 asm string.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D103047
Change-Id: Ice69ae38f644de7f228a75ca47c43e88b1f7d9e1
Extend the legalization of global SADDR loads and stores
with changing to VADDR to the FLAT scratch instructions.
Differential Revision: https://reviews.llvm.org/D101408
Instead of legalizing saddr operand with a readfirstlane
when address is moved from SGPR to VGPR we can just
change the opcode.
Differential Revision: https://reviews.llvm.org/D101405
By convention, VOP1/2/C instructions which can be promoted to VOP3 have _e32 suffix while promoted instructions have _e64 suffix. Instructions which have a single variant should have no _e32/_e64 suffix. Unfortunately there was no simple way to identify single variant instructions - it was implemented by a hack. See bug https://bugs.llvm.org/show_bug.cgi?id=39086.
This fix simplifies handling of single VOP instructions by adding a dedicated flag.
Differential Revision: https://reviews.llvm.org/D99408
Replace individual operands GLC, SLC, and DLC with a single cache_policy
bitmask operand. This will reduce the number of operands in MIR and I hope
the amount of code. These operands are mostly 0 anyway.
Additional advantage that parser will accept these flags in any order unlike
now.
Differential Revision: https://reviews.llvm.org/D96469
Make OMod explicit instead of implied by HasModifiers in the
operand list. Requires explicitly setting HasOMod=1 for
irregular OMod usage in instruction V_CVT_{U,I}*
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D97587
Change-Id: I230e1476f529e816eec60e242531f23a99e3839f
This allows GlobalISel to use this instruction where available. I assume
SelectionDAG always selects s_xnor_b32 so it isn't affected by this
change.
Differential Revision: https://reviews.llvm.org/D97560
We are using AtomicNoRet map in multiple places to determine
if an instruction atomic, rtn or nortn atomic. This method
does not work always since we have some instructions which
only has rtn or nortn version.
One such instruction is ds_wrxchg_rtn_b32 which does not have
nortn version. This has caused changes in memory legalizer
tests.
Differential Revision: https://reviews.llvm.org/D96639
HasModifiers should be true if at least one modifier is used.
This should make the use of this field bit more consistent.
Differential Revision: https://reviews.llvm.org/D94795
VOP3 and VOP DPP subroutines to generate input
operands and asm strings were essentially copy
pasted several times. They are deduplicated to
reduce the maintenance burden and allow faster
development.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D94102
Change-Id: I76225eed3c33239d9573351e0c8a0abfad0146ea
These parameters set a default value of 0, so I believe they
should include a 0 suffix. This allows for versions which do not
set a default value in future.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D93187
This change adds a real glc operand to the return atomic
instead of just string " glc" in the middle of the asm
string.
Improves asm parser diagnostics.
Differential Revision: https://reviews.llvm.org/D90730
The support is disabled by default. So far there is instruction
selection, spilling, and frame elimination. It also changes SP
from unswizzled to swizzled as used by flat scratch instructions,
so it cannot be mixed with MUBUF stack access.
At the very least missing:
- GlobalISel;
- Some optimizations in frame elimination in between vector
and scalar ALU;
- It shall finally allow to always materialize frame index
as an SGPR, but that is not implemented and frame elimination
cannot handle it yet;
- Unaligned and/or multidword flat scratch shall work, but it
is legalized now for MUBUF;
- Operand folding cannot optimize FI like with MUBUF yet;
- It will need scaling the value of the SP/FP in the DWARF
expression to recover the unswizzled scratch address;
Differential Revision: https://reviews.llvm.org/D89170
We use the Real vs Pseudo instruction abstraction for other
types of instructions to facilitate changes in opcode
between gpu generations.
This patch introduces that abstraction to SOPC and SOPP.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D89738
Change-Id: I59d53c2c7058b49d05b60350f4062a9b542d3138
Fix lowering and instruction selection for v3x16 types
and enable InstCombine to emit them.
This patch only implements it for the selection dag.
GlobalISel tests in GlobalISel/llvm.amdgcn.image.load.1d.d16.ll and
GlobalISel/llvm.amdgcn.image.store.2d.d16.ll still don't work.
Differential Revision: https://reviews.llvm.org/D84420
We have a single noret intrinsic an a lot of special handling
around it. Declare it just as any other but do not define rtn
instructions itself instead.
Differential Revision: https://reviews.llvm.org/D87719
Fix local ds_read/write_b96/b128 so they can be selected if the alignment
allows. Otherwise, either pick appropriate ds_read2/write2 instructions or break
them down.
Differential Revision: https://reviews.llvm.org/D81638
This was always set to 0. Use a default value of 0 in this context to
satisfy the instruction definition patterns. We can't unconditionally
use SLC with a default value of 0 due to limitations in TableGen's
handling of defaulted operands when followed by non-default operands.
Unfortunately this ends up not working as expected on targets with
16-bit operations due to AMDGPUCodeGenPrepare's promotion of uniform
16-bit ops to i32.
The vector case annoyingly requires switching the checked opcode,
since constants for vectors aren't directly handled.
I also need to think more carefully about whether this is valid for i1.
This introduces the same bug llvm.amdgcn.s.setreg has where if the
user specified an immediate outside of the valid 16-bit range, it will
select into a verifier error.
MTBUF implementation has many issues and this change addresses most of these:
- refactored duplicated code;
- hardcoded constants moved out of high-level code;
- fixed a decoding error when nfmt or dfmt are zero (bug 36932);
- corrected parsing of operand separators (bug 46403);
- corrected handling of missing operands (bug 46404);
- corrected handling of out-of-range modifiers (bug 46421);
- corrected default value (bug 46467).
Reviewers: arsenm, rampitec, vpykhtin, artem.tamazov, kzhuravl
Differential Revision: https://reviews.llvm.org/D83760
It seems to be a hardware defect that the half inline constants do not
work as expected for the 16-bit integer operations (the inverse does
work correctly). Experimentation seems to show these are really
reading the 32-bit inline constants, which can be observed by writing
inline asm using op_sel to see what's in the high half of the
constant. Theoretically we could fold the high halves of the 32-bit
constants using op_sel.
The *_asm_all.s MC tests are broken, and I don't know where the script
to autogenerate these are. I started manually fixing it, but there's
just too many cases to fix. This also does break the
assembler/disassembler support for these values, and I'm not sure what
to do about it. These are still valid encodings, so it seems like you
should be able to use them in some way. If you wrote assembly using
them, you could have really meant it (perhaps to read the high bits
with op_sel?). The disassembler will print the invalid literal
constant which will fail to re-assemble. The behavior is also
different depending on the use context. Consider this example, which
was previously accepted and encoded using the inline constant:
v_mad_i16 v5, v1, -4.0, v3
; encoding: [0x05,0x00,0xec,0xd1,0x01,0xef,0x0d,0x04]
In contexts where an inline immediate is required (such as on gfx8/9),
this will now be rejected. For gfx10, this will produce the literal
encoding and change the printed format:
v_mad_i16 v5, v1, 0xc400, v3
; encoding: [0x05,0x00,0x5e,0xd7,0x01,0xff,0x0d,0x04,0x00,0xc4,0x00,0x00]
This is just another variation of the issue that we don't perfectly
handle round trip assembly/disassembly due to not tracking how
immediates were encoded. This doesn't matter much in practice, since
compilers don't emit the suboptimal encoding. I doubt any users are
relying on this behavior (although I did make use of the old behavior
to figure out what was wrong).
Fixes bug 46302.
Matt Arsenault